Uusimmat CENin julkaisut Tässä luettelossa mainitaan CENin uudet julkaisut ajalta 1.4. – 31.7.2017. 01.040.07 Mathematics. Natural sciences (Vocabularies) CEN ISO/TS 80004-12:2017 Nanotechnologies. Vocabulary. Part 12: Quantum phenomena in nanotechnology (ISO/TS 80004-12:2016) CEN ISO/TS 80004-2:2017 Nanotechnologies. Vocabulary. Part 2: Nano-objects (ISO/TS 80004-2:2015) 01.040.19 Testing (Vocabularies) EN 1330-9:2017 Non-destructive testing. Terminology. Part 9: Terms used in acoustic emission testing EN ISO 20484:2017 Non-destructive testing. Leak testing. Vocabulary (ISO 20484:2017) 01.040.91 Construction materials and building (Vocabularies) EN 13967:2012+A1:2017 Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characteristics 01.080.10 Public information symbols EN ISO 7010:2012/A7:2017 Graphical symbols. Safety colours and safety signs. Registered safety signs. Amendment 7 (ISO 7010:2011/Amd 7:2016) EN ISO 7010:2012/A7:2017 Graphical symbols. Safety colours and safety signs. Registered safety signs. Amendment 7 (ISO 7010:2011/Amd 7:2016) 01.080.20 Graphical symbols for use on specific equipment EN ISO 7010:2012/A7:2017 Graphical symbols. Safety colours and safety signs. Registered safety signs. Amendment 7 (ISO 7010:2011/Amd 7:2016) EN ISO 7010:2012/A7:2017 Graphical symbols. Safety colours and safety signs. Registered safety signs. Amendment 7 (ISO 7010:2011/Amd 7:2016) 03.080.99 Other services EN 16844:2017 Aesthetic medicine services. Non-surgical medical treatments 03.100.02 Governance and ethics CWA 17145-1:2017 Ethics assessment for research and innovation. Part 1: Ethics committee CWA 17145-2:2017 Ethics assessment for research and innovation. Part 2: Ethical impact assessment framework

03.100.40 Research and development CWA 17145-1:2017 Ethics assessment for research and innovation. Part 1: Ethics committee CWA 17145-2:2017 Ethics assessment for research and innovation. Part 2: Ethical impact assessment framework 03.220.01 Transport in general CEN ISO/TS 17429:2017 Intelligent transport systems. Cooperative ITS. ITS station facilities for the transfer of information between ITS stations (ISO/TS 17429:2017) 03.220.20 Road transport EN ISO 12813:2015/A1:2017 Electronic fee collection. Compliance check communication for autonomous systems. Amendment 1 (ISO 12813:2015/Amd 1:2017) EN ISO 13141:2015/A1:2017 Electronic fee collection. Localisation augmentation communication for autonomous systems. Amendment 1 (ISO 13141:2015/Amd 1:2017) 03.240 Postal services CEN/TS 17073:2017 Postal services. Interfaces for cross border parcels 07.100.20 Microbiology of water EN ISO 11731:2017 Water quality. Enumeration of Legionella (ISO 11731:2017) EN ISO 13843:2017 Water quality. Requirements for establishing performance characteristics of quantitative microbiological methods (ISO 13843:2017) 07.100.30 Food microbiology EN ISO 10272-1:2017 Microbiology of the food chain. Horizontal method for detection and enumeration of Campylobacter spp.. Part 1: Detection method (ISO 10272-1:2017) EN ISO 10272-2:2017 Microbiology of the food chain. Horizontal method for detection and enumeration of Campylobacter spp.. Part 2: Colony-count technique (ISO 10272-2:2017) EN ISO 10273:2017 Microbiology of the food chain. Horizontal method for the detection of pathogenic Yersinia enterocolitica (ISO 10273:2017) EN ISO 11290-1:2017 Microbiology of the food chain. Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp.. Part 1: Detection method (ISO 11290-1:2017) EN ISO 11290-2:2017 Microbiology of the food chain. Horizontal method for the detection and enumeration of Listeria monocytogenes and of Listeria spp.. Part 2: Enumeration method (ISO 11290-2:2017)

EN ISO 16654:2001/A1:2017 Microbiology of food and animal feeding stuffs. Horizontal method for the detection of Escherichia coli O157. Amendment 1: Annex B: Result of interlaboratory studies (ISO 16654:2001/Amd 1:2017) EN ISO 19020:2017 Microbiology of the food chain. Horizontal method for the immunoenzymatic detection of staphylococcal enterotoxins in foodstuffs (ISO 19020:2017) EN ISO 19343:2017 Microbiology of the food chain. Detection and quantification of histamine in fish and fishery products. HPLC method (ISO 19343:2017) EN ISO 21528-1:2017 Microbiology of the food chain. Horizontal method for the detection and enumeration of Enterobacteriaceae. Part 1: Detection of Enterobacteriaceae (ISO 21528-1:2017) EN ISO 21528-2:2017 Microbiology of the food chain. Horizontal method for the detection and enumeration of Enterobacteriaceae. Part 2: Colony-count technique (ISO 21528-2:2017) EN ISO 21872-1:2017 Microbiology of food and animal feeding stuffs. Horizontal method for the detection of potentially enteropathogenic Vibrio spp.. Part 1: Detection of Vibrio parahaemolyticus and Vibrio cholerae (ISO 21872-1:2017) EN ISO 22964:2017 Microbiology of the food chain. Horizontal method for the detection of Cronobacter spp. (ISO 22964:2017) EN ISO 6887-1:2017 Microbiology of the food chain. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Part 1: General rules for the preparation of the initial suspension and decimal dilutions (ISO 6887-1:2017) EN ISO 6887-2:2017 Microbiology of the food chain. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Part 2: Specific rules for the preparation of meat and meat products (ISO 6887-2:2017) EN ISO 6887-3:2017 Microbiology of the food chain. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Part 3: Specific rules for the preparation of fish and fishery products (ISO 6887-3:2017) EN ISO 6887-4:2017 Microbiology of the food chain. Preparation of test samples, initial suspension and decimal dilutions for microbiological examination. Part 4: Specific rules for the preparation of miscellaneous products (ISO 6887-4:2017) 07.100.40 Cosmetics microbiology EN ISO 16212:2017 Cosmetics. Microbiology. Enumeration of yeast and mould (ISO 16212:2017) EN ISO 18415:2017 Cosmetics. Microbiology. Detection of specified and non-specified microorganisms (ISO 18415:2017) 07.100.99 Other standards related to microbiology EN ISO 21148:2017 Cosmetics. Microbiology. General instructions for microbiological examination (ISO 21148:2017) EN ISO 21149:2017 Cosmetics. Microbiology. Enumeration and detection of aerobic mesophilic bacteria (ISO 21149:2017) 07.120 Nanotechnologies

CEN ISO/TS 80004-12:2017 Nanotechnologies. Vocabulary. Part 12: Quantum phenomena in nanotechnology (ISO/TS 80004-12:2016) CEN ISO/TS 80004-2:2017 Nanotechnologies. Vocabulary. Part 2: Nano-objects (ISO/TS 80004-2:2015) 11.020.10 Health care services in general EN 16844:2017 Aesthetic medicine services. Non-surgical medical treatments 11.040.25 Syringes, needles and catheters EN ISO 80369-7:2017 Small-bore connectors for liquids and gases in healthcare applications. Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01) EN ISO 80369-7:2017 Small-bore connectors for liquids and gases in healthcare applications. Part 7: Connectors for intravascular or hypodermic applications (ISO 80369-7:2016, Corrected version 2016-12-01) 11.040.55 Diagnostic equipment EN ISO 80601-2-56:2017 Medical electrical equipment. Part 2-56: Particular requirements for basic safety and essential performance of clinical thermometers for body temperature measurement (ISO 80601-2-56:2017) 11.040.70 Ophthalmic equipment EN ISO 10939:2017 Ophthalmic instruments. Slit-lamp microscopes (ISO 10939:2017) EN ISO 11979-8:2017 Ophthalmic implants. Intraocular lenses. Part 8: Fundamental requirements (ISO 11979-8:2017) 11.060.20 Dental equipment EN ISO 1797:2017 Dentistry. Shanks for rotary and oscillating instruments (ISO 1797:2017) EN ISO 19715:2017 Dentistry. Filling instrument with contra angle (ISO 19715:2017) EN ISO 7787-3:2017 Dentistry. Laboratory cutters. Part 3: Carbide cutters for milling machines (ISO 7787-3:2017) EN ISO 9873:2017 Dentistry. Intra-oral mirrors (ISO 9873:2017) 11.060.25 Dental instruments EN ISO 19490:2017 Dentistry. Sinus membrane elevator (ISO 19490:2017) 11.080.01 Sterilization and disinfection in general EN ISO 11137-3:2017

Sterilization of health care products. Radiation. Part 3: Guidance on dosimetric aspects of development, validation and routine control (ISO 11137-3:2017) 11.080.30 Sterilized packaging EN ISO 11607-1:2017 Packaging for terminally sterilized medical devices. Part 1: Requirements for materials, sterile barrier systems and packaging systems (ISO 11607-1:2006) EN ISO 11607-2:2017 Packaging for terminally sterilized medical devices. Part 2: Validation requirements for forming, sealing and assembly processes (ISO 11607-2:2006) 11.100.20 Biological evaluation of medical devices EN ISO 10993-4:2017 Biological evaluation of medical devices. Part 4: Selection of tests for interactions with blood (ISO 10993-4:2017) 11.180.01 Aids for disabled and handicapped persons in general EN 16586-1:2017 Railway applications. Design for PRM use. Accessibility of persons with reduced mobility to rolling stock. Part 1: Steps for access and egress EN 16586-2:2017 Railway applications. Design for PRM use. Accessibility of persons with reduced mobility to rolling stock. Part 2: Boarding aids EN 16587:2017 Railway applications. Design for PRM Use. Requirements on obstacle free routes for infrastructure 11.180.20 Aids for incontinence and ostomy EN ISO 15621:2017 Absorbent incontinence aids for urine and/or faeces. General guidelines on evaluation (ISO 15621:2017) 13.020.50 Ecolabelling EN 16810:2017 Resilient, textile and laminate floor coverings. Environmental product declarations. Product category rules 13.020.55 Biobased products EN 16640:2017/AC:2017 Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method EN 16935:2017 Bio-based products. Requirements for Business-to-Consumer communication and claims 13.040.20 Ambient atmospheres EN 16913:2017 Ambient air. Standard method for measurement of NO3¯, SO4²¯, Cl¯, NH4+, Na+, K+, Mg²+, Ca²+ in PM2,5 as deposited on filters

13.040.30 Workplace atmospheres EN 16897:2017 Workplace exposure. Characterization of ultrafine aerosols/nanoaerosols. Determination of number concentration using condensation particle counters 13.060.45 Examination of water in general EN ISO 5667-16:2017 Water quality. Sampling. Part 16: Guidance on biotesting of samples (ISO 5667-16:2017) 13.060.60 Examination of physical properties of water EN ISO 9697:2017 Water quality. Gross beta activity in non-saline water. Test method using thick source (ISO 9697:2015) 13.060.70 Examination of biological properties of water EN ISO 20227:2017 Water quality. Determination of the growth inhibition effects of waste waters, natural waters and chemicals on the duckweed Spirodela polyrhiza. Method using a stock culture independent microbiotest (ISO 20227:2017) 13.110 Safety of machinery CEN ISO/TR 22100-1:2017 Safety of machinery. Relationship with ISO 12100. Part 1: How ISO 12100 relates to type-B and type-C standards (ISO/TR 22100-1:2015) 13.160 Vibration and shock with respect to human beings EN ISO 28927-1:2009/A1:2017 Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 1: Angle and vertical grinders. Amendment 1: Cupped wire brushes (ISO 28927-1:2009/Amd 1:2017) EN ISO 8041-1:2017 Human response to vibration. Measuring instrumentation. Part 1: General purpose vibration meters (ISO 8041-1:2017) 13.180 Ergonomics EN ISO 27500:2017 The human-centred organization. Rationale and general principles (ISO 27500:2016) EN ISO 9241-333:2017 Ergonomics of human-system interaction. Part 333: Stereoscopic displays using glasses (ISO 9241-333:2017) 13.220.40 Ignitability and burning behaviour of materials and products EN ISO 4589-1:2017 Plastics. Determination of burning behaviour by oxygen index. Part 1: General requirements (ISO 4589-1:2017) EN ISO 4589-2:2017 Plastics. Determination of burning behaviour by oxygen index. Part 2: Ambient-temperature test (ISO 4589-2:2017) EN ISO 4589-3:2017 Plastics. Determination of burning behaviour by oxygen index. Part 3: Elevated-temperature test (ISO 4589-3:2017) EN ISO 5659-2:2017

Plastics. Smoke generation. Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017) 13.220.50 Fire-resistance of building materials and elements EN 1364-5:2017 Fire resistance tests for non-loadbearing elements. Part 5: Air transfer grilles EN 1366-10:2011+A1:2017 Fire resistance tests for service installations. Part 10: Smoke control dampers 13.280 Radiation protection EN ISO 9697:2017 Water quality. Gross beta activity in non-saline water. Test method using thick source (ISO 9697:2015) 13.310 Protection against crime CWA 17147:2017 Guidelines for the evaluation of installed security systems, based on the STEFi dimensions CWA 17147:2017 Guidelines for the evaluation of installed security systems, based on the STEFi dimensions 13.340.10 Protective clothing EN 16689:2017 Protective clothing for firefighters. Performance requirements for protective clothing for technical rescue 13.340.20 Head protective equipment EN 1384:2017 Helmets for equestrian activities 17.040.20 Properties of surfaces EN ISO 25178-72:2017 Geometrical product specifications (GPS). Surface texture: Areal. Part 72: XML file format x3p (ISO 25178-72:2017) 17.140.01 Acoustic measurements and noise abatement in general EN ISO 3745:2012/A1:2017 Acoustics. Determination of sound power levels and sound energy levels of noise sources using sound pressure. Precision methods for anechoic rooms and hemi-anechoic rooms. Amendment 1 (ISO 3745:2012/Amd 1:2017) 17.140.30 Noise emitted by means of transport EN ISO 11819-2:2017 Acoustics. Measurement of the influence of road surfaces on traffic noise. Part 2: The close-proximity method (ISO 11819-2:2017) 19.100 Non-destructive testing CEN/TR 17108:2017 Non-destructive testing. Lighting in penetrant and magnetic particle testing, good practice

EN 1330-9:2017 Non-destructive testing. Terminology. Part 9: Terms used in acoustic emission testing EN ISO 20339:2017 Non-destructive testing. Equipment for eddy current examination. Array probe characteristics and verification (ISO 20339:2017) EN ISO 20484:2017 Non-destructive testing. Leak testing. Vocabulary (ISO 20484:2017) 23.020.01 Fluid storage devices in general EN 1993-4-2:2007/A1:2017 Eurocode 3. Design of steel structures. Part 4-2: Tanks 23.020.10 Stationary containers and tanks CEN/TR 13121-5:2017 GRP tanks and vessels for use above ground. Part 5: Example calculation of a GRP-vessel EN 1993-4-2:2007/A1:2017 Eurocode 3. Design of steel structures. Part 4-2: Tanks 23.020.35 Gas cylinders EN 13952:2017 LPG equipment and accessories. Filling operations for LPG cylinders EN 1439:2017 LPG equipment and accessories. Procedure for checking transportable refillable LPG cylinders before, during and after filling EN 1442:2017 LPG equipment and accessories. Transportable refillable welded steel cylinders for LPG. Design and construction EN ISO 10297:2014/A1:2017 Gas cylinders. Cylinder valves. Specification and type testing. Amendment 1: Pressure drums and tubes (ISO 10297:2014/Amd 1:2017) EN ISO 11114-4:2017 Transportable gas cylinders. Compatibility of cylinder and valve materials with gas contents. Part 4: Test methods for selecting steels resistant to hydrogen embrittlement (ISO 11114-4:2017) 23.040.01 Pipeline components and pipelines in general CEN/TR 13480-7:2017 Metallic industrial piping. Part 7: Guidance on the use of conformity assessment procedures EN 13480-2:2017 Metallic industrial piping. Part 2: Materials EN 13480-3:2017 Metallic industrial piping. Part 3: Design and calculation EN 13480-3:2012/A1:2017 Metallic industrial piping. Part3: Design and calculation EN 13480-4:2017 Metallic industrial piping. Part 4: Fabrication and installation

EN 13480-4:2017 Metallic industrial piping. Part 4: Fabrication and installation EN 13480-4:2012/A4:2017 Metallic industrial piping. Part 4: Fabrication and installation EN 13480-4:2012/A5:2017 Metallic industrial piping. Part 4: Fabrication and installation EN 13480-5:2017 Metallic industrial piping. Part 5: Inspection and testing EN 13480-5:2017 Metallic industrial piping. Part 5: Inspection and testing EN 13480-5:2012/A3:2017 Metallic industrial piping. Part 5: Inspection and testing EN 13480-6:2017 Metallic industrial piping. Part 6: Additional requirements for buried piping EN 13480-8:2017 Metallic industrial piping. Part 8: Additional requirements for aluminium and aluminium alloy piping EN 1453-1:2017/AC:2017 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U). Part 1: Specifications for pipes and the system 23.040.03 Pipelines and its parts for external water conveyance systems EN 13480-1:2017 Metallic industrial piping. Part 1: General 23.040.05 Pipelines and its parts for external sewage systems EN 1453-1:2017/AC:2017 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U). Part 1: Specifications for pipes and the system EN 752:2017 Drain and sewer systems outside buildings. Sewer system management 23.040.70 Hoses and hose assemblies EN 16820:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Bonded elastomeric hoses with or without a lining EN 16821:2017 Rubber and plastics hoses and hose assemblies for use in the pharmaceutical and biotechnological industry. Silicone rubber hoses 23.060.01 Valves in general EN ISO 5210:2017 Industrial valves. Multi-turn valve actuator attachments (ISO 5210:2017) EN ISO 5211:2017

Industrial valves. Part-turn actuator attachments (ISO 5211:2017) 23.060.40 Pressure regulators EN ISO 10297:2014/A1:2017 Gas cylinders. Cylinder valves. Specification and type testing. Amendment 1: Pressure drums and tubes (ISO 10297:2014/Amd 1:2017) 23.100.99 Other fluid power system components EN 14359:2017 Gas-loaded accumulators for fluid power applications 25.080.01 Machine tools in general EN ISO 16093:2017 Machine tools. Safety. Sawing machines for cold metal (ISO 16093:2017) 25.140.10 Pneumatic tools EN ISO 28927-1:2009/A1:2017 Hand-held portable power tools. Test methods for evaluation of vibration emission. Part 1: Angle and vertical grinders. Amendment 1: Cupped wire brushes (ISO 28927-1:2009/Amd 1:2017) 25.160.10 Welding processes EN ISO 14555:2017 Welding. Arc stud welding of metallic materials (ISO 14555:2017) EN ISO 14555:2017 Welding. Arc stud welding of metallic materials (ISO 14555:2017) EN ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017) EN ISO 15614-1:2017 Specification and qualification of welding procedures for metallic materials. Welding procedure test. Part 1: Arc and gas welding of steels and arc welding of nickel and nickel alloys (ISO 15614-1:2017) 25.160.20 Welding consumables EN 13479:2017 Welding consumables. General product standard for filler metals and fluxes for fusion welding of metallic materials EN ISO 14343:2017 Welding consumables. Wire electrodes, strip electrodes, wires and rods for arc welding of stainless and heat resisting steels. Classification (ISO 14343:2017) EN ISO 18276:2017 Welding consumables. Tubular cored electrodes for gas-shielded and non-gas-shielded metal arc welding of high strength steels. Classification (ISO 18276:2017) EN ISO 3580:2017 Welding consumables. Covered electrodes for manual metal arc welding of creep-resisting steels. Classification (ISO 3580:2017) EN ISO 636:2017

Welding consumables. Rods, wires and deposits for tungsten inert gas welding of non-alloy and fine-grain steels. Classification (ISO 636:2017) 25.160.40 Welded joints and welds EN 13100-1:2017 Non destructive testing of welded joints of thermoplastics semi-finished products. Part 1: Visual examination 25.220.20 Surface treatment EN ISO 14232-1:2017 Thermal spraying. Powders. Part 1: Characterization and technical supply conditions (ISO 14232-1:2017) 25.220.40 Metallic coatings EN ISO 14713-1:2017 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Part 1: General principles of design and corrosion resistance (ISO 14713-1:2017) EN ISO 14713-3:2017 Zinc coatings. Guidelines and recommendations for the protection against corrosion of iron and steel in structures. Part 3: Sherardizing (ISO 14713-3:2017) 25.220.60 Organic coatings EN 13523-21:2017 Coil coated metals. Test methods. Part 21: Evaluation of outdoor exposed panels EN 13523-24:2017 Coil coated metals. Test methods. Part 24: Resistance to blocking and pressure marking EN 13523-27:2017 Coil coated metals. Test methods. Part 27: Resistance to humid poultice (Cataplasm test) EN 13523-8:2017 Coil coated metals. Test methods. Part 8: Resistance to salt spray (fog) 27.060.10 Liquid and solid fuel burners EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners. Specification (ISO 6806:2017) 27.080 Heat pumps EN 16147:2017/AC:2017 Heat pumps with electrically driven compressors. Testing, performance rating and requirements for marking of domestic hot water units 27.160 Solar energy engineering CEN/TR 15316-6-1:2017 Energy performance of buildings- Method for calculation of system energy requirements and system efficiencies. Part 6-1: Explanation and justification of EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4 CEN/TR 15316-6-6:2017 Energy performance of buildings. Method for calculation of system energy performance and system efficiencies. Part 6-6: Explanation and justification of EN 15316-4-3, Module M3-8-3, M8-8-3

CEN/TR 15316-6-7:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-7: Explanation and justification of EN 15316-4-4, Module M8-3-4, M8-8-4, M8-11-4 CEN/TR 15316-6-9:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-9: Explanation and justification of EN 15316-4-8, Module M3-8-8 EN 15316-4-3:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-3: Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3 27.180 Wind turbine energy systems EN 15316-4-10:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-10: Wind power generation systems, Module M11-8-7 27.190 Biological sources and alternatice sources of energy EN 16214-3:2012+A1:2017 Sustainability criteria for the production of biofuels and bioliquids for energy applications. Principles, criteria, indicators and verifiers. Part 3: Biodiversity and environmental aspects related to nature protection purposes EN 16723-2:2017 Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network. Part 2: Automotive fuels specification EN ISO 14780:2017 Solid biofuels. Sample preparation (ISO 14780:2017) EN ISO 18125:2017 Solid biofuels. Determination of calorific value (ISO 18125:2017) EN ISO 19743:2017 Solid biofuels. Determination of content of heavy extraneous materials larger than 3,15 mm (ISO 19743:2017) 35.030 IT Security CEN/TR 419010:2017 Framework for standardization of signatures. Extended structure including electronic identification and authentication CEN/TR 419200:2017 Guidance for signature creation and other related devices 35.040.50 Automatic identification and data capture techniques CEN/TS 17073:2017 Postal services. Interfaces for cross border parcels 35.080 Software CEN ISO/IEC TR 25060:2017 Systems and software engineering. Systems and software product Quality Requirements and Evaluation (SQuaRE). Common Industry Format (CIF) for usability: General framework for usability-related information (ISO/IEC TR 25060:2010) EN ISO/IEC 25063:2017 Systems and software engineering. Systems and software product Quality Requirements and Evaluation (SQuaRE).

Common Industry Format (CIF) for usability: Context of use description (ISO/IEC 25063:2014) EN ISO/IEC 25064:2017 Systems and software engineering. Software product Quality Requirements and Evaluation (SQuaRE). Common Industry Format (CIF) for usability: User needs report (ISO/IEC 25064:2013) 35.180 IT terminal and other peripheral equipment EN ISO 9241-333:2017 Ergonomics of human-system interaction. Part 333: Stereoscopic displays using glasses (ISO 9241-333:2017) 35.240.15 Identification cards and related devices CEN/TS 16794-1:2017 Public transport. Communication between contactless readers and fare media. Part 1: Implementation requirements for ISO/IEC 14443 CEN/TS 16794-2:2017 Public transport. Communication between contactless readers and fare media. Part 2: Test plan for ISO/IEC 14443 CEN/TS 17051:2017 Full body photography 35.240.20 IT applications in office work CEN/TR 16931-4:2017 Electronic invoicing. Part 4: Guidelines on interoperability of electronic invoices at the transmission level CEN/TR 16931-5:2017 Electronic invoicing. Part 5: Guidelines on the use of sector or country extensions in conjunction with EN 16931-1, methodology to be applied in the real environment CEN/TS 16931-2:2017 Electronic invoicing. Part 2: List of syntaxes that comply with EN 16931-1 CEN/TS 16931-3-1:2017 Electronic invoicing. Part 3-1: Methodology for syntax bindings of the core elements of an electronic invoice EN 16931-1:2017 Electronic invoicing. Part 1: Semantic data model of the core elements of an electronic invoice 35.240.30 IT applications in information, documentation and publishing CEN/TR 419010:2017 Framework for standardization of signatures. Extended structure including electronic identification and authentication CEN/TR 419200:2017 Guidance for signature creation and other related devices 35.240.60 IT applications in transport and trade CEN ISO/TS 17429:2017 Intelligent transport systems. Cooperative ITS. ITS station facilities for the transfer of information between ITS stations (ISO/TS 17429:2017) CEN/TS 16794-1:2017 Public transport. Communication between contactless readers and fare media. Part 1: Implementation requirements for ISO/IEC 14443

CEN/TS 16986:2016/AC:2017 Electronic Fee Collection. Interoperable application profiles for information exchange between Service Provision and Toll Charging EN ISO 12813:2015/A1:2017 Electronic fee collection. Compliance check communication for autonomous systems. Amendment 1 (ISO 12813:2015/Amd 1:2017) EN ISO 13141:2015/A1:2017 Electronic fee collection. Localisation augmentation communication for autonomous systems. Amendment 1 (ISO 13141:2015/Amd 1:2017) EN ISO 14823:2017 Intelligent transport systems. Graphic data dictionary (ISO 14823:2017) 35.240.63 IT applications in trade CEN/TR 16931-4:2017 Electronic invoicing. Part 4: Guidelines on interoperability of electronic invoices at the transmission level CEN/TR 16931-5:2017 Electronic invoicing. Part 5: Guidelines on the use of sector or country extensions in conjunction with EN 16931-1, methodology to be applied in the real environment CEN/TS 16931-2:2017 Electronic invoicing. Part 2: List of syntaxes that comply with EN 16931-1 CEN/TS 16931-3-1:2017 Electronic invoicing. Part 3-1: Methodology for syntax bindings of the core elements of an electronic invoice EN 16931-1:2017 Electronic invoicing. Part 1: Semantic data model of the core elements of an electronic invoice 35.240.69 IT applications in postal services CEN/TS 17073:2017 Postal services. Interfaces for cross border parcels 35.240.80 IT applications in health care technology EN ISO 11073-10417:2017 Health informatics. Personal health device communication. Part 10417: Device specialization. Glucose meter (ISO/IEEE 11073-10417:2017) 35.240.99 IT applications in other fields EN ISO 16484-5:2017 Building automation and control systems (BACS). Part 5: Data communication protocol (ISO 16484-5:2017) 43.040.15 Car informatics. On board computer systems EN ISO 14823:2017 Intelligent transport systems. Graphic data dictionary (ISO 14823:2017) 43.060.40 Fuel systems EN ISO 12617:2017

Road vehicles. Liquefied natural gas (LNG) refuelling connector. 3,1 MPa connector (ISO 12617:2015, Corrected version 2016-01-15) 43.150 Cycles CEN/TR 17112:2017 Cycles. Composite material used in bicycles. Specific tests suitable for components manufactured from composite materials 45.020 Railway engineering in general EN 15273-1:2013+A1:2016/AC:2017 Railway applications. Gauges. Part 1: General. Common rules for infrastructure and rolling stock EN 16587:2017 Railway applications. Design for PRM Use. Requirements on obstacle free routes for infrastructure 45.060.01 Railway rolling stock in general EN 15273-1:2013+A1:2016/AC:2017 Railway applications. Gauges. Part 1: General. Common rules for infrastructure and rolling stock EN 15663:2017 Railway applications. Vehicle reference masses 45.060.20 Trailing stock EN 16586-1:2017 Railway applications. Design for PRM use. Accessibility of persons with reduced mobility to rolling stock. Part 1: Steps for access and egress EN 16586-2:2017 Railway applications. Design for PRM use. Accessibility of persons with reduced mobility to rolling stock. Part 2: Boarding aids 45.120 Equipment for railway/cableway construction and maintenance EN 14033-1:2017 Railway applications. Track. Railbound construction and maintenance machines. Part 1: Technical requirements for running EN 14033-2:2017 Railway applications. Track. Railbound construction and maintenance machines. Part 2: Technical requirements for travelling and working EN 14033-3:2017 Railway applications. Track. Railbound construction and maintenance machines. Part 3: General safety requirements 49.030.20 Bolts, screws, studs EN 3302:2017 Aerospace series. Bolts in heat resisting steel FE-PM1708 (FV535). Classification: 1 000 MPa/550 °C. Technical specification EN 4072:2016/AC:2017 Aerospace series. Screws, 100° countersunk normal head, offset cruciform recess, close tolerance shank, short thread in titanium alloy, aluminium IVD coated. Classification: 1 100 MPa (at ambient temperature) / 425 °C EN 4162:2016/AC:2017 Aerospace series. Screws 100° countersunk normal head, offset cruciform recess, coarse tolerance normal shank, medium

length thread, in alloy steel, cadmium plated. Classification: 1 100 MPa (at ambient temperature) / 235 °C 49.030.99 Other fasteners EN 2285:2017 Aerospace series. Bushes, plain, aluminium alloy, with self-lubricating liner. Dimensions and loads EN 2286:2017 Aerospace series. Bushes, flanged aluminium alloy, with self-lubricating liner. Dimensions and loads 49.035 Components for aerospace construction EN 6075:2017 Aerospace series. Static seal elements O-Ring ethylene-propylene, moulded, phosphate ester resistant (- 55 °C to 107 °C). Inch series EN 6076:2017 Aerospace series. Static seal elements O-Ring for straight thread tube fitting boss, ethylene-propylene, moulded, phosphate ester resistant (-55 °C to 107 °C). Inch series 49.060 Aerospace electric equipment and systems EN 2714-013:2017 Aerospace series. Cables, electrical, single and multicore for general purpose. Operating temperatures between -55 °C and 260 °C. Part 013: DR family, screened (spiral) and jacketed, UV laser printable. Product standard EN 2997-001:2017 Aerospace series. Connectors, electrical, circular, coupled by threaded ring, fire-resistant or non fire-resistant, operating temperatures. 65 °C to 175 °C continuous, 200 °C continuous, 260 °C peak. Part 001: Technical specification EN 3773-006:2017 Aerospace series. Circuit breakers, single-pole, temperature compensated, rated currents 1 A to 25 A. Part 006: 6,3 mm blade terminal. Product standard EN 4674-003:2017 Aerospace series. Electrical cables, installation. Self-wrapping shielding (EMI) protective sleeve. Part 003: Open sleeve. Inside pressurized area. EMI protection 5 kA. Temperature range. 65 °C to 200 °C. Product standard EN 4681-001:2017 Aerospace series. Cables, electric, general purpose, with conductors in aluminium or copper-clad aluminium. Part 001: Technical Specification 49.080 Aerospace fluid systems and components EN 4801:2017 Aerospace series. Flange couplings. Swivel flange with 3 fastening holes, in heat resisting steel. Inch series EN 4802:2017 Aerospace series. Flange couplings. Swivel flange with 3 fastening holes, in nickel alloy. Inch series EN 4803:2017 Aerospace series. Flange couplings. Swivel flange with 4 fastening holes, in heat resisting steel. Inch series EN 4804:2017 Aerospace series. Flange couplings. Swivel flange with 4 fastening holes, in nickel alloy. Inch series EN 4805:2017 Aerospace series. Flange couplings. Weld coupling, straight, in heat resisting steel. Inch series EN 4806:2017

Aerospace series. Flange couplings. Weld coupling, straight, in nickel alloy. Inch series EN 4807:2017 Aerospace series. Flange couplings. Weld coupling, 90° elbow, in heat resisting steel. Inch series EN 4808:2017 Aerospace series. Flange couplings. Weld coupling, 90° elbow, in nickel alloy. Inch series EN 4809:2017 Aerospace series. Flange couplings. Gasket seal with fluorocarbon seal on aluminium plate with 3 fastening holes. Inch series EN 4810:2017 Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 3 fastening holes. Inch series EN 4811:2017 Aerospace series. Flange couplings. Gasket seal with fluorocarbon seal on aluminium plate with 4 fastening holes. Inch series EN 4812:2017 Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal on heat resisting steel plate with 4 fastening holes. Inch series EN 4813:2017 Aerospace series. Flange couplings. Cap, in heat resisting steel. Inch series EN 4814:2017 Aerospace series. Flange couplings up to 21 000 kPa. Technical specification. Inch series EN 4816:2017 Aerospace series. Flange couplings. Gasket seal with nickel alloy C seal. Technical specification. Inch series 49.095 Passenger and cabin equipment EN 4727:2017 Aerospace series. Standardized passenger seat weight information 49.100 Ground service and maintenance equipment EN 12312-12:2017 Aircraft ground support equipment. Specific requirements. Part 12: Potable water service equipment EN 12312-13:2017 Aircraft ground support equipment. Specific requirements. Part 13: Lavatory service equipment 49.140 Space systems and operations EN 16603-50-15:2017 Space engineering. CANbus extention protocol EN 16603-50-15:2017 Space engineering. CANbus extention protocol 53.040.20 Components for conveyors EN ISO 15236-3:2017 Steel cord conveyor belts. Part 3: Special safety requirements for belts for use in underground installations (ISO 15236-3:2017)

55.020 Packaging and distribution of goods in general CEN/TS 17073:2017 Postal services. Interfaces for cross border parcels 65.040.20 Buildings and installations for processing and storage of agricultural produce EN 1993-4-1:2007/A1:2017 Eurocode 3. Design of steel structures. Part 4-1: Silos 65.060.50 Harvesting equipment EN ISO 4254-12:2012/A1:2017 Agricultural machinery. Safety. Part 12: Rotary disc and drum mowers and flail mowers (ISO 4254-12:2012/Amd 1:2017) 65.060.70 Horticultural equipment EN ISO 5395-2:2013/A2:2017 Garden equipment. Safety requirements for combustion-engine-powered lawnmowers. Part 2: Pedestrian-controlled lawnmowers. Amendment 2: Cutting-means-enclosure guards (ISO 5395-2:2013/Amd 2:2017) 65.060.80 Forestry equipment EN ISO 11681-2:2011/A1:2017 Machinery for forestry. Portable chain-saw safety requirements and testing . Part 2: Chain-saws for tree service (ISO 11681-2:2011/Amd 1:2017) 65.080 Fertilizers CEN/TS 17060:2017 Fertilizers. Determination of molybdenum in concentrations > 10 % using a gravimetric method with 8-hydroxyquinoline 65.120 Animal feeding stuffs EN 16930:2017 Animal feeding stuffs: Methods of sampling and analysis. Determination of carbadox and olaquindox by HPLC/UV EN 16936:2017 Animal feeding stuffs: Methods of sampling and analysis. Screening on the antibiotics tylosin, virginiamycin, spiramycin, bacitracin-zinc and avoparcin at sub-additive levels in compound feed by a microbiological plate test EN 16967:2017 Animal feeding stuffs: Methods of sampling and analysis. Predictive equations for metabolizable energy in feed materials and compound feed (pet food) for cats and dogs including dietetic food 67.050 General methods of test and analysis for food products CEN/TS 17083:2017 Foodstuffs. Determination of acrylamide in food and coffee by gas chromatography-mass spectrometry (GC-MS) EN 16858:2017 Foodstuffs. Determination of melamine and cyanuric acid in foodstuffs by liquid chromatography and tandem mass spectrometry (LC-MS/MS) EN 16943:2017

Foodstuffs. Determination of calcium, copper, iron, magnesium, manganese, phosphorus, potassium, sodium, sulfur and zinc by ICP-OES 67.060 Cereals, pulses and derived products CEN/TS 17083:2017 Foodstuffs. Determination of acrylamide in food and coffee by gas chromatography-mass spectrometry (GC-MS) EN 16923:2017 Foodstuffs. Determination of T-2 toxin and HT-2 toxin in cereals and cereal products for infants and young children by LC-MS/MS after SPE cleanup 67.080.20 Vegetables and derived products CEN/TS 17083:2017 Foodstuffs. Determination of acrylamide in food and coffee by gas chromatography-mass spectrometry (GC-MS) 67.100.01 Milk and milk products in general EN ISO 22964:2017 Microbiology of the food chain. Horizontal method for the detection of Cronobacter spp. (ISO 22964:2017) 67.140.20 Coffee and coffee substitutes CEN/TS 17083:2017 Foodstuffs. Determination of acrylamide in food and coffee by gas chromatography-mass spectrometry (GC-MS) 67.160.10 Alcoholic beverages EN 16852:2017 Foodstuffs. Determination of ethyl carbamate in stone fruit spirits, fruit marc spirits and other spirit drinks. GC-MS method 67.160.20 Non-alcoholic beverages EN 16857:2017 Foodstuffs. Determination of benzene in soft drinks, other beverages and vegetable-based infant foods by headspace gas chromatography mass spectrometry (HS-GC-MS) 67.200.10 Animal and vegetable fats and oils EN 16924:2017 Foodstuffs. Determination of zearalenone in edible vegetable oils by LC-FLD or LC-MS/MS EN 16995:2017 Foodstuffs. Vegetable oils and foodstuff on basis of vegetable oils. Determination of mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) with on-line HPLC-GC-FID analysis EN ISO 12966-2:2017 Animal and vegetable fats and oils. Gas chromatography of fatty acid methyl esters. Part 2: Preparation of methyl esters of fatty acids (ISO 12966-2:2017) EN ISO 15302:2017 Animal and vegetable fats and oils. Determination of benzo[a]pyrene. Reverse-phase high performance liquid chromatography method (ISO 15302:2017) EN ISO 3656:2011/A1:2017 Animal and vegetable fats and oils. Determination of ultraviolet absorbance expressed as specific UV extinction.

Amendment 1 (ISO 3656:2011/Amd 1:2017) 67.230 Prepackaged and prepared foods EN 16857:2017 Foodstuffs. Determination of benzene in soft drinks, other beverages and vegetable-based infant foods by headspace gas chromatography mass spectrometry (HS-GC-MS) EN 16923:2017 Foodstuffs. Determination of T-2 toxin and HT-2 toxin in cereals and cereal products for infants and young children by LC-MS/MS after SPE cleanup 67.240 Sensory analysis EN ISO 11132:2017 Sensory analysis. Methodology. Guidelines for monitoring the performance of a quantitative sensory panel (ISO 11132:2012) EN ISO 11136:2017 Sensory analysis. Methodology. General guidance for conducting hedonic tests with consumers in a controlled area (ISO 11136:2014) 71.040.40 Chemical analysis EN 16640:2017/AC:2017 Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method EN ISO 16664:2017 Gas analysis. Handling of calibration gases and gas mixtures. Guidelines (ISO 16664:2017) 71.100.70 Cosmetics. Toiletries EN ISO 21148:2017 Cosmetics. Microbiology. General instructions for microbiological examination (ISO 21148:2017) EN ISO 21149:2017 Cosmetics. Microbiology. Enumeration and detection of aerobic mesophilic bacteria (ISO 21149:2017) 71.100.80 Chemicals for purification of water EN 1017:2014+A1:2017 Chemicals used for treatment of water intended for human consumption. Half-burnt dolomite EN 12485:2017 Chemicals used for treatment of water intended for human consumption. Calcium carbonate, high-calcium lime, half-burnt dolomite, magnesium oxide, calcium magnesium carbonate and dolomitic lime. Test methods 73.120 Equipment for processing of minerals EN 15163:2017 Machines and installations for the exploitation and processing of natural stone. Safety. Requirements for diamond wire saws 75.100 Lubricants, industrial oils and related products EN 3021:2017 Aerospace series. Molybdenum disulphide dry film lubricants graphite and halogen free. Technical specification

75.160.10 Solid fuels EN 1860-1:2013+A1:2017 Appliances, solid fuels and firelighters for barbecueing. Part 1: Barbecues burning solid fuels. Requirements and test methods 75.160.20 Liquid fuels CEN/TR 16389:2017 Automotive fuels. Paraffinic diesel fuel and blends with FAME. Background to the parameters required and their respective limits and determination EN 15470:2017 Liquefied petroleum gases. Determination of dissolved residues. High temperature Gas chromatographic method EN 15471:2017 Liquefied petroleum gases. Determination of dissolved residues. High-temperature gravimetric method EN 228:2012+A1:2017 Automotive fuels. Unleaded petrol. Requirements and test methods EN 590:2013+A1:2017 Automotive fuels. Diesel. Requirements and test methods EN ISO 6246:2017 Petroleum products. Gum content of fuels. Jet evaporation method (ISO 6246:2017) 75.160.30 Gaseous fuels EN 16723-2:2017 Natural gas and biomethane for use in transport and biomethane for injection in the natural gas network. Part 2: Automotive fuels specification 75.160.40 Biofuels CEN/TR 17103:2017 Fast pyrolysis bio-oil for stationary internal combustion engines. Quality determination EN ISO 14780:2017 Solid biofuels. Sample preparation (ISO 14780:2017) EN ISO 18125:2017 Solid biofuels. Determination of calorific value (ISO 18125:2017) EN ISO 18135:2017 Solid Biofuels. Sampling (ISO 18135:2017) EN ISO 19743:2017 Solid biofuels. Determination of content of heavy extraneous materials larger than 3,15 mm (ISO 19743:2017) 77.040.10 Mechanical testing of metals EN ISO 377:2017 Steel and steel products. Location and preparation of samples and test pieces for mechanical testing (ISO 377:2017) 77.040.99 Other methods of testing of metals

EN 10247:2017 Micrographic examination of the non-metallic inclusion content of steels using standard pictures 77.060 Corrosion of metals EN ISO 15257:2017 Cathodic protection. Competence levels of cathodic protection persons. Basis for certification scheme (ISO 15257:2017) EN ISO 9227:2017 Corrosion tests in artificial atmospheres. Salt spray tests (ISO 9227:2017) EN ISO 9227:2017 Corrosion tests in artificial atmospheres. Salt spray tests (ISO 9227:2017) 77.140.25 Spring steels EN 10270-1:2011+A1:2017 Steel wire for mechanical springs. Part 1: Patented cold drawn unalloyed spring steel wire 77.140.30 Steels for pressure purposes EN 10028-1:2017 Flat products made of steels for pressure purposes. Part 1: General requirements EN 10028-2:2017 Flat products made of steels for pressure purposes. Part 2: Non-alloy and alloy steels with specified elevated temperature properties EN 10028-3:2017 Flat products made of steels for pressure purposes. Part 3: Weldable fine grain steels, normalized EN 10028-4:2017 Flat products made of steels for pressure purposes. Part 4: Nickel alloy steels with specified low temperature properties EN 10028-5:2017 Flat products made of steels for pressure purposes. Part 5: Weldable fine grain steels, thermomechanically rolled EN 10028-6:2017 Flat products made of steels for pressure purposes. Part 6: Weldable fine grain steels, quenched and tempered EN 10222-1:2017 Steel forgings for pressure purposes. Part 1: General requirements for open die forgings EN 10222-2:2017 Steel forgings for pressure purposes. Part 2: Ferritic and martensitic steels with specified elevated temperatures properties EN 10222-3:2017 Steel forgings for pressure purposes. Part 3: Nickel steels with specified low temperature properties EN 10222-4:2017 Steel forgings for pressure purposes. Part 4: Weldable fine grain steels with high proof strength EN 10222-5:2017 Steel forgings for pressure purposes. Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels 77.140.50 Flat steel products and semi-products EN 10028-1:2017 Flat products made of steels for pressure purposes. Part 1: General requirements

EN 10028-2:2017 Flat products made of steels for pressure purposes. Part 2: Non-alloy and alloy steels with specified elevated temperature properties EN 10028-3:2017 Flat products made of steels for pressure purposes. Part 3: Weldable fine grain steels, normalized EN 10028-4:2017 Flat products made of steels for pressure purposes. Part 4: Nickel alloy steels with specified low temperature properties EN 10028-5:2017 Flat products made of steels for pressure purposes. Part 5: Weldable fine grain steels, thermomechanically rolled EN 10028-6:2017 Flat products made of steels for pressure purposes. Part 6: Weldable fine grain steels, quenched and tempered EN 10120:2017 Steel sheet and strip for welded gas cylinders 77.140.60 Steel bars and rods EN ISO 16120-1:2017 Non-alloy steel wire rod for conversion to wire. Part 1: General requirements (ISO 16120-1:2017) EN ISO 16120-4:2017 Non-alloy steel wire rod for conversion to wire. Part 4: Specific requirements for wire rod for special applications (ISO 16120-4:2017) 77.140.85 Iron and steel forgings EN 10222-1:2017 Steel forgings for pressure purposes. Part 1: General requirements for open die forgings EN 10222-2:2017 Steel forgings for pressure purposes. Part 2: Ferritic and martensitic steels with specified elevated temperatures properties EN 10222-3:2017 Steel forgings for pressure purposes. Part 3: Nickel steels with specified low temperature properties EN 10222-4:2017 Steel forgings for pressure purposes. Part 4: Weldable fine grain steels with high proof strength EN 10222-5:2017 Steel forgings for pressure purposes. Part 5: Martensitic, austenitic and austenitic-ferritic stainless steels 79.080 Semi-manufactures of timber EN 14354:2017 Wood-based panels. Wood veneer floor coverings EN 14915:2013+A1:2017 Solid wood panelling and cladding. Characteristics, requirements and marking 83.040.01 Raw materials for rubber and plastics in general EN 16640:2017/AC:2017 Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon

method 83.080.01 Plastics in general EN ISO 4589-1:2017 Plastics. Determination of burning behaviour by oxygen index. Part 1: General requirements (ISO 4589-1:2017) EN ISO 4589-2:2017 Plastics. Determination of burning behaviour by oxygen index. Part 2: Ambient-temperature test (ISO 4589-2:2017) EN ISO 4589-3:2017 Plastics. Determination of burning behaviour by oxygen index. Part 3: Elevated-temperature test (ISO 4589-3:2017) EN ISO 5659-2:2017 Plastics. Smoke generation. Part 2: Determination of optical density by a single-chamber test (ISO 5659-2:2017) 83.080.20 Thermoplastic materials EN ISO 15023-1:2017 Plastics. Poly(vinyl alcohol) (PVAL) materials. Part 1: Designation system and basis for specifications (ISO 15023-1:2017) EN ISO 20568-1:2017 Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Part 1: Designation system and basis for specifications (ISO 20568-1:2017) EN ISO 20568-2:2017 Plastics. Fluoropolymer dispersions and moulding and extrusion materials. Part 2: Preparation of test specimens and determination of properties (ISO 20568-2:2017) EN ISO 294-1:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Part 1: General principles, and moulding of multipurpose and bar test specimens (ISO 294-1:2017) 83.140.40 Hoses EN ISO 6806:2017 Rubber hoses and hose assemblies for use in oil burners. Specification (ISO 6806:2017) 87.040 Paints and varnishes EN ISO 16773-4:2017 Electrochemical impedance spectroscopy (EIS) on coated and uncoated metallic specimens. Part 4: Examples of spectra of polymer-coated and uncoated specimens (ISO 16773-4:2017) 91.010.30 Technical aspects EN 1993-1-5:2006/A1:2017 Eurocode 3. Design of steel structures. Part 1-5: Plated structural elements EN 1993-1-6:2007/A1:2017 Eurocode 3. Design of steel structures. Part 1-6: Strength and Stability of Shell Structures EN 1993-4-1:2007/A1:2017 Eurocode 3. Design of steel structures. Part 4-1: Silos EN 1993-4-2:2007/A1:2017 Eurocode 3. Design of steel structures. Part 4-2: Tanks

91.040.10 Public buildings EN 13200-8:2017 Spectator facilities. Part 8: Safety Management 91.060.01 Elements for buildings in general EN ISO 13786:2017 Thermal performance of building components. Dynamic thermal characteristics. Calculation methods (ISO 13786:2017) 91.060.10 Walls. Partitions. Facades EN ISO 12631:2017 Thermal performance of curtain walling. Calculation of thermal transmittance (ISO 12631:2017) 91.060.50 Doors and windows EN ISO 10077-1:2017 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Part 1: General (ISO 10077-1:2017) EN ISO 10077-2:2017 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Part 2: Numerical method for frames (ISO 10077-2:2017) 91.060.99 Other elements of buildings EN 1364-5:2017 Fire resistance tests for non-loadbearing elements. Part 5: Air transfer grilles 91.080.13 Steel structures EN 1993-1-5:2006/A1:2017 Eurocode 3. Design of steel structures. Part 1-5: Plated structural elements EN 1993-1-6:2007/A1:2017 Eurocode 3. Design of steel structures. Part 1-6: Strength and Stability of Shell Structures EN 1993-4-1:2007/A1:2017 Eurocode 3. Design of steel structures. Part 4-1: Silos EN 1993-4-2:2007/A1:2017 Eurocode 3. Design of steel structures. Part 4-2: Tanks 91.100.01 Construction materials in general CEN/TR 17105:2017 Construction products. Assessment of release of dangerous substances. Guidance on the use of ecotoxicity tests applied to construction products 91.100.10 Cement. Gypsum. Lime. Mortar EN 13915:2017 Prefabricated gypsum plasterboard panels with a cellular paperboard core. Definitions, requirements and test methods EN 14209:2017

Preformed plasterboard cornices. Definitions, requirements and test methods EN 14353:2017 Metal beads and feature profiles for use with gypsum plasterboards. Definitions, requirements and test methods EN 14496:2017 Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards. Definitions, requirements and test methods EN 15824:2017 Specifications for external renders and internal plasters based on organic binders 91.100.30 Concrete and concrete products EN 16757:2017 Sustainability of construction works. Environmental product declarations. Product Category Rules for concrete and concrete elements EN 451-1:2017 Method of testing fly ash. Part 1: Determination of free calcium oxide content EN 451-2:2017 Method of testing fly ash. Part 2: Determination of fineness by wet sieving 91.100.50 Binders. Sealing materials EN 13967:2012+A1:2017 Flexible sheets for waterproofing. Plastic and rubber damp proof sheets including plastic and rubber basement tanking sheet. Definitions and characteristics EN 14693:2017 Flexible sheets for waterproofing. Waterproofing of concrete bridge decks and other concrete surfaces trafficable by vehicles. Determination of the behaviour of waterproofing sheets during application of mastic asphalt EN 15651-4:2017/AC:2017 Sealants for non-structural use in joints in buildings and pedestrian walkways. Part 4: Sealants for pedestrian walkways EN ISO 10563:2017 Buildings and civil engineering works. Sealants. Determination of change in mass and volume (ISO 10563:2017) 91.120.10 Thermal insulation of buildings CEN ISO/TR 52000-2:2017 Energy performance of buildings. Overarching EPB assessment. Part 2: Explanation and justification of ISO 52000-1 (ISO/TR 52000-2:2017) CEN ISO/TR 52003-2:2017 Energy performance of buildings. Indicators, requirements, ratings and certificates. Part 2: Explanation and justification of ISO 52003-1 (ISO/TR 52003-2:2017) CEN ISO/TR 52010-2:2017 Energy performance of buildings. External climatic conditions. Part 2: Explanation and justification of ISO 52010-1 (ISO/TR 52010-2:2017) CEN ISO/TR 52016-2:2017 Energy performance of buildings. Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads. Part 2: Explanation and justification of ISO 52016-1 and ISO 52017-1 (ISO/TR 52016-2:2017) CEN ISO/TR 52018-2:2017 Energy performance of buildings. Indicators for partial EPB requirements related to thermal energy balance and fabric

features. Part 2: Explanation and justification of ISO 52018-1 (ISO/TR 52018-2:2017) CEN ISO/TR 52019-2:2017 Energy performance of buildings. Hygrothermal performance of building components and building elements. Part 2: Explanation and justification (ISO/TR 52019-2:2017) CEN ISO/TR 52022-2:2017 Energy performance of buildings. Thermal, solar and daylight properties of building components and elements. Part 2: Explanation and justification (ISO/TR 52022-2:2017) CEN/TR 12831-2:2017 Energy performance of buildings. Method for calculation of the design heat load. Part 2: Explanation and justification of EN 12831-1, Module M3-3 CEN/TR 12831-4:2017 Energy performance of buildings. Method for calculation of the design heat load. Part 4: Explanation and justification of EN 12831-3, Module M8-2, M8-3 CEN/TR 15316-6-1:2017 Energy performance of buildings- Method for calculation of system energy requirements and system efficiencies. Part 6-1: Explanation and justification of EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4 CEN/TR 15316-6-10:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-10: Explanation and justification of EN 15316-5, Module M3-7, M8-7 CEN/TR 15316-6-2:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-2: Explanation and justification of EN 15316-2, Module M3-5, M4-5 CEN/TR 15316-6-3:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-3: Explanation and justification of 15316-3, Module M3-6, M4-6, M8-6 CEN/TR 15316-6-4:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-4: Explanation and justification of EN 15316-4-1, Module M3-8-1, M8-8-1 CEN/TR 15316-6-5:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-5: Explanation and justification of EN 15316-4-2, Module M3-8 CEN/TR 15316-6-6:2017 Energy performance of buildings. Method for calculation of system energy performance and system efficiencies. Part 6-6: Explanation and justification of EN 15316-4-3, Module M3-8-3, M8-8-3 CEN/TR 15316-6-7:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-7: Explanation and justification of EN 15316-4-4, Module M8-3-4, M8-8-4, M8-11-4 CEN/TR 15316-6-8:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-8: Explanation and justification of EN 15316-4-5 (District heating and cooling), Module M3-8-5, M4-8-5, M8-8-5, M11-8-5 CEN/TR 15316-6-9:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-9: Explanation and justification of EN 15316-4-8, Module M3-8-8 CEN/TR 15378-2:2017 Energy performance of buildings. Heating systems and DHW in buildings. Part 2: Explanation and justification of EN 15378-1, Module M3-11 and M8-11 CEN/TR 15378-4:2017

Energy performance of buildings. Heating systems and DHW in buildings. Part 4: Explanation and justification of EN 15378-3, Module M3-10, M8-10 CEN/TR 15459-2:2017 Energy performance of buildings. Economic evaluation procedure for energy systems in buildings. Part 2: Explanation and justification of EN 15459-1, Module M1-14 CEN/TR 16798-10:2017 Energy performance of buildings. Ventilation for buildings. Part 10: Interpretation of the requirements in EN 16798-9. Calculation methods for energy requirements of cooling systems (Module M4-1,M4-4, M4-9). General CEN/TR 16798-14:2017 Energy performance of buildings. Ventilation for buildings. Part 14: Interpretation of the requirements in EN 16798-13. Calculation of cooling systems (Module M4-8). Generation CEN/TR 16798-16:2017 Energy performance of buildings. Ventilation for buildings. Part 16: Interpretation of the requirements in EN 16798-15. Calculation of cooling systems (Module M4-7). Storage CEN/TR 16798-18:2017 Energy performance of buildings. Ventilation for buildings. Part 18: Interpretation of the requirements in EN 16798-17. Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11) CEN/TR 16798-4:2017 Energy performance of buildings. Ventilation for buildings. Part 4: Interpretation of the requirements in EN 16798- 3. For non-residential buildings. Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) CEN/TR 16798-6:2017 Energy performance of buildings. Ventilation for buildings. Part 6: Interpretation of the requirements in EN 16798-5 -1 and EN 16798-5-2. Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M 6-5, M6-8 , M7-5, M7-8) CEN/TR 16798-8:2017 Energy performance of buildings. Ventilation for buildings. Part 8: Interpretation of the requirements in EN 16798-7. Calculation methods for the determination of air flow rates in buildings including infiltration. (Module M5-5) EN 14496:2017 Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards. Definitions, requirements and test methods EN 15193-1:2017 Energy performance of buildings. Energy requirements for lighting. Part 1: Specifications, Module M9 EN 15232-1:2017 Energy Performance of Buildings. Energy performance of buildings. Part 1: Impact of Building Automation, Controls and Building Management. Modules M10-4,5,6,7,8,9,10 EN 16783:2017 Thermal insulation products. Product category rules (PCR) for factory made and in-situ formed products for preparing environmental product declarations EN 16798-13:2017 Energy performance of buildings. Ventilation for buildings. Part 13: Calculation of cooling systems (Module M4-8). Generation EN 16798-15:2017 Energy performance of buildings. Ventilation for buildings. Part 15: Calculation of cooling systems (Module M4-7). Storage EN 16798-17:2017 Energy performance of buildings. Ventilation for buildings. Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11) EN 16798-5-1:2017

Energy performance of buildings. Ventilation for buildings. Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8). Method 1: Distribution and generation EN 16798-7:2017 Energy performance of buildings. Ventilation for buildings. Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5) EN 16798-9:2017 Energy performance of buildings. Ventilation for buildings. Part 9: Calculation methods for energy requirements of cooling systems (Modules M4-1, M4-4, M4-9). General EN 16883:2017 Conservation of cultural heritage. Guidelines for improving the energy performance of historic buildings EN 16947-1:2017 Energy Performance of Buildings. Building Management System. Part 1: Module M10-12 EN ISO 10077-1:2017 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Part 1: General (ISO 10077-1:2017) EN ISO 10077-2:2017 Thermal performance of windows, doors and shutters. Calculation of thermal transmittance. Part 2: Numerical method for frames (ISO 10077-2:2017) EN ISO 10211:2017 Thermal bridges in building construction. Heat flows and surface temperatures. Detailed calculations (ISO 10211:2017) EN ISO 12631:2017 Thermal performance of curtain walling. Calculation of thermal transmittance (ISO 12631:2017) EN ISO 13370:2017 Thermal performance of buildings. Heat transfer via the ground. Calculation methods (ISO 13370:2017) EN ISO 13786:2017 Thermal performance of building components. Dynamic thermal characteristics. Calculation methods (ISO 13786:2017) EN ISO 13789:2017 Thermal performance of buildings. Transmission and ventilation heat transfer coefficients. Calculation method (ISO 13789:2017) EN ISO 14683:2017 Thermal bridges in building construction. Linear thermal transmittance. Simplified methods and default values (ISO 14683:2017) EN ISO 52000-1:2017 Energy performance of buildings. Overarching EPB assessment. Part 1: General framework and procedures (ISO 52000-1:2017) EN ISO 52003-1:2017 Energy performance of buildings. Indicators, requirements, ratings and certificates. Part 1: General aspects and application to the overall energy performance (ISO 52003-1:2017) EN ISO 52010-1:2017 Energy performance of buildings. External climatic conditions. Part 1: Conversion of climatic data for energy calculations (ISO 52010-1:2017) EN ISO 52016-1:2017 Energy performance of buildings. Energy needs for heating and cooling, internal temperatures and sensible and latent heat loads. Part 1: Calculation procedures (ISO 52016-1:2017) EN ISO 52017-1:2017

Energy performance of buildings. Sensible and latent heat loads and internal temperatures. Part 1: Generic calculation procedures (ISO 52017-1:2017) EN ISO 52018-1:2017 Energy performance of buildings. Indicators for partial EPB requirements related to thermal energy balance and fabric features. Part 1: Overview of options (ISO 52018-1:2017) EN ISO 52022-1:2017 Energy performance of buildings. Thermal, solar and daylight properties of building components and elements. Part 1: Simplified calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-1:2017) EN ISO 52022-3:2017 Energy performance of buildings. Thermal, solar and daylight properties of building components and elements. Part 3: Detailed calculation method of the solar and daylight characteristics for solar protection devices combined with glazing (ISO 52022-3:2017) EN ISO 6946:2017 Building components and building elements. Thermal resistance and thermal transmittance. Calculation methods (ISO 6946:2017) 91.120.20 Acoustics in building. Sound insulation EN 14496:2017 Gypsum based adhesives for thermal/acoustic insulation composite panels and gypsum boards. Definitions, requirements and test methods EN 15657:2017 Acoustic properties of building elements and of buildings. Laboratory measurement of structure-borne sound from building service equipment for all installation conditions 91.140.01 Installations in buildings in general EN ISO 16484-5:2017 Building automation and control systems (BACS). Part 5: Data communication protocol (ISO 16484-5:2017) 91.140.10 Central heating systems CEN/TR 12831-2:2017 Energy performance of buildings. Method for calculation of the design heat load. Part 2: Explanation and justification of EN 12831-1, Module M3-3 CEN/TR 12831-4:2017 Energy performance of buildings. Method for calculation of the design heat load. Part 4: Explanation and justification of EN 12831-3, Module M8-2, M8-3 CEN/TR 15316-6-1:2017 Energy performance of buildings- Method for calculation of system energy requirements and system efficiencies. Part 6-1: Explanation and justification of EN 15316-1, Module M3-1, M3-4, M3-9, M8-1, M8-4 CEN/TR 15316-6-10:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-10: Explanation and justification of EN 15316-5, Module M3-7, M8-7 CEN/TR 15316-6-2:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-2: Explanation and justification of EN 15316-2, Module M3-5, M4-5 CEN/TR 15316-6-3:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-3: Explanation and justification of 15316-3, Module M3-6, M4-6, M8-6

CEN/TR 15316-6-4:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-4: Explanation and justification of EN 15316-4-1, Module M3-8-1, M8-8-1 CEN/TR 15316-6-5:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-5: Explanation and justification of EN 15316-4-2, Module M3-8 CEN/TR 15316-6-6:2017 Energy performance of buildings. Method for calculation of system energy performance and system efficiencies. Part 6-6: Explanation and justification of EN 15316-4-3, Module M3-8-3, M8-8-3 CEN/TR 15316-6-7:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-7: Explanation and justification of EN 15316-4-4, Module M8-3-4, M8-8-4, M8-11-4 CEN/TR 15316-6-8:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-8: Explanation and justification of EN 15316-4-5 (District heating and cooling), Module M3-8-5, M4-8-5, M8-8-5, M11-8-5 CEN/TR 15316-6-9:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-9: Explanation and justification of EN 15316-4-8, Module M3-8-8 CEN/TR 15378-2:2017 Energy performance of buildings. Heating systems and DHW in buildings. Part 2: Explanation and justification of EN 15378-1, Module M3-11 and M8-11 CEN/TR 15378-4:2017 Energy performance of buildings. Heating systems and DHW in buildings. Part 4: Explanation and justification of EN 15378-3, Module M3-10, M8-10 CEN/TR 15459-2:2017 Energy performance of buildings. Economic evaluation procedure for energy systems in buildings. Part 2: Explanation and justification of EN 15459-1, Module M1-14 EN 12098-1:2017 Energy Performance of Buildings. Controls for heating systems. Part 1: Control equipment for hot water heating systems. Modules M3-5, 6, 7, 8 EN 12098-5:2017 Energy Performance of Buildings. Controls for heating systems. Part 5: Start-stop schedulers for heating systems. Modules M3-5,6,7,8 EN 12831-1:2017 Energy performance of buildings. Method for calculation of the design heat load. Part 1: Space heating load, Module M3-3 EN 12831-3:2017 Energy performance of buildings. Method for calculation of the design heat load. Part 3: Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3 EN 15316-1:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 1: General and Energy performance expression, Module M3-1, M3-4, M3-9, M8-1, M8-4 EN 15316-2:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 2: Space emission systems (heating and cooling), Module M3-5, M4-5 EN 15316-3:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6

EN 15316-4-1:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1 EN 15316-4-10:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-10: Wind power generation systems, Module M11-8-7 EN 15316-4-2:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-2: Space heating generation systems, heat pump systems, Module M3-8-2, M8-8-2 EN 15316-4-3:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-3: Heat generation systems, thermal solar and photovoltaic systems, Module M3-8-3, M8-8-3, M11-8-3 EN 15316-4-4:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-4: Heat generation systems, building-integrated cogeneration systems, Module M8-3-4, M8-8-4, M8-11-4 EN 15316-4-5:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5 EN 15316-4-8:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-8: Space heating generation systems, air heating and overhead radiant heating systems, including stoves (local), Module M3-8-8 EN 15316-5:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7 EN 15378-1:2017 Energy performance of buildings. Heating systems and DHW in buildings. Part 1: Inspection of boilers, heating systems and DHW, Module M3-11, M8-11 EN 15378-3:2017 Energy performance of buildings. Heating and DHW systems in buildings. Part 3: Measured energy performance, Module M3-10, M8-10 EN 15459-1:2017 Energy performance of buildings. Economic evaluation procedure for energy systems in buildings. Part 1: Calculation procedures, Module M1-14 91.140.30 Ventilation and air-conditioning CEN/TR 15316-6-3:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-3: Explanation and justification of 15316-3, Module M3-6, M4-6, M8-6 CEN/TR 15316-6-8:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-8: Explanation and justification of EN 15316-4-5 (District heating and cooling), Module M3-8-5, M4-8-5, M8-8-5, M11-8-5 CEN/TR 16798-10:2017 Energy performance of buildings. Ventilation for buildings. Part 10: Interpretation of the requirements in EN 16798-9. Calculation methods for energy requirements of cooling systems (Module M4-1,M4-4, M4-9). General CEN/TR 16798-14:2017 Energy performance of buildings. Ventilation for buildings. Part 14: Interpretation of the requirements in EN 16798-13.

Calculation of cooling systems (Module M4-8). Generation CEN/TR 16798-16:2017 Energy performance of buildings. Ventilation for buildings. Part 16: Interpretation of the requirements in EN 16798-15. Calculation of cooling systems (Module M4-7). Storage CEN/TR 16798-18:2017 Energy performance of buildings. Ventilation for buildings. Part 18: Interpretation of the requirements in EN 16798-17. Guidelines for inspection of ventilation and air-conditioning systems (Modules M4-11, M5-11, M6-11, M7-11) CEN/TR 16798-4:2017 Energy performance of buildings. Ventilation for buildings. Part 4: Interpretation of the requirements in EN 16798- 3. For non-residential buildings. Performance requirements for ventilation and room-conditioning systems(Modules M5-1, M5-4) CEN/TR 16798-6:2017 Energy performance of buildings. Ventilation for buildings. Part 6: Interpretation of the requirements in EN 16798-5 -1 and EN 16798-5-2. Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M 6-5, M6-8 , M7-5, M7-8) CEN/TR 16798-8:2017 Energy performance of buildings. Ventilation for buildings. Part 8: Interpretation of the requirements in EN 16798-7. Calculation methods for the determination of air flow rates in buildings including infiltration. (Module M5-5) EN 13141-3:2017 Ventilation for buildings. Performance testing of components/products for residential ventilation. Part 3: Range hoods for residential use without fan EN 1366-10:2011+A1:2017 Fire resistance tests for service installations. Part 10: Smoke control dampers EN 15316-3:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6 EN 15316-4-5:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-5: District heating and cooling, Module M3-8-5, M4-8-5, M8-8-5, M11-8-5 EN 15500-1:2017 Energy Performance of Buildings. Control for heating, ventilating and air conditioning applications. Part 1: Electronic individual zone control equipment. Modules M3-5, M4-5, M5-5 EN 16798-13:2017 Energy performance of buildings. Ventilation for buildings. Part 13: Calculation of cooling systems (Module M4-8). Generation EN 16798-15:2017 Energy performance of buildings. Ventilation for buildings. Part 15: Calculation of cooling systems (Module M4-7). Storage EN 16798-17:2017 Energy performance of buildings. Ventilation for buildings. Part 17: Guidelines for inspection of ventilation and air conditioning systems (Module M4-11, M5-11, M6-11, M7-11) EN 16798-5-1:2017 Energy performance of buildings. Ventilation for buildings. Part 5-1: Calculation methods for energy requirements of ventilation and air conditioning systems (Modules M5-6, M5-8, M6-5, M6-8, M7-5, M7-8). Method 1: Distribution and generation EN 16798-7:2017 Energy performance of buildings. Ventilation for buildings. Part 7: Calculation methods for the determination of air flow rates in buildings including infiltration (Modules M5-5) EN 16798-9:2017

Energy performance of buildings. Ventilation for buildings. Part 9: Calculation methods for energy requirements of cooling systems (Modules M4-1, M4-4, M4-9). General 91.140.40 Gas supply systems EN 1359:2017 Gas meters. Diaphragm gas meters 91.140.60 Water supply systems EN ISO 4064-1:2017 Water meters for cold potable water and hot water. Part 1: Metrological and technical requirements (ISO 4064-1:2014) EN ISO 4064-2:2017 Water meters for cold potable water and hot water. Part 2: Test methods (ISO 4064-2:2014) EN ISO 4064-5:2017 Water meters for cold potable water and hot water. Part 5: Installation requirements (ISO 4064-5:2014) 91.140.65 Water heating equipment CEN/TR 12831-4:2017 Energy performance of buildings. Method for calculation of the design heat load. Part 4: Explanation and justification of EN 12831-3, Module M8-2, M8-3 CEN/TR 15316-6-10:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-10: Explanation and justification of EN 15316-5, Module M3-7, M8-7 CEN/TR 15316-6-3:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-3: Explanation and justification of 15316-3, Module M3-6, M4-6, M8-6 CEN/TR 15316-6-4:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 6-4: Explanation and justification of EN 15316-4-1, Module M3-8-1, M8-8-1 EN 12831-3:2017 Energy performance of buildings. Method for calculation of the design heat load. Part 3: Domestic hot water systems heat load and characterisation of needs, Module M8-2, M8-3 EN 15316-3:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 3: Space distribution systems (DHW, heating and cooling), Module M3-6, M4-6, M8-6 EN 15316-4-1:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 4-1: Space heating and DHW generation systems, combustion systems (boilers, biomass), Module M3-8-1, M8-8-1 EN 15316-5:2017 Energy performance of buildings. Method for calculation of system energy requirements and system efficiencies. Part 5: Space heating and DHW storage systems (not cooling), Module M3-7, M8-7 91.140.80 Drainage systems EN 1453-1:2017/AC:2017 Plastics piping systems with structured-wall pipes for soil and waste discharge (low and high temperature) inside buildings. Unplasticized poly(vinyl chloride) (PVC-U). Part 1: Specifications for pipes and the system

91.140.90 Lifts. Escalators EN 115-1:2017 Safety of escalators and moving walks. Part 1: Construction and installation 91.140.99 Other installations in buildings EN 15193-1:2017 Energy performance of buildings. Energy requirements for lighting. Part 1: Specifications, Module M9 91.160.01 Lighting in general EN 15193-1:2017 Energy performance of buildings. Energy requirements for lighting. Part 1: Specifications, Module M9 93.020 Earthworks. Excavations. Foundation construction. Underground works EN ISO 22476-11:2017 Geotechnical investigation and testing. Field testing. Part 11: Flat dilatometer test (ISO 22476-11:2017) 93.030 External sewage systems EN 752:2017 Drain and sewer systems outside buildings. Sewer system management 93.080.20 Road construction materials CEN/TS 12697-52:2017 Bituminous mixtures. Test methods. Part 52: Conditioning to address oxidative ageing EN 12697-18:2017 Bituminous mixtures. Test methods. Part 18: Binder drainage EN 12697-27:2017 Bituminous mixtures. Test methods. Part 27: Sampling EN 14187-1:2017 Cold applied joint sealants. Test methods. Part 1: Determination of rate of cure 93.100 Construction of railways EN 13146-5:2012/AC:2017 Railway applications. Track. Test methods for fastening systems. Part 5: Determination of electrical resistance EN 13674-1:2011+A1:2017 Railway applications. Track. Rail. Part 1: Vignole railway rails 46 kg/m and above EN 13803:2017 Railway applications. Track. Track alignment design parameters. Track gauges 1 435 mm and wider EN 14033-1:2017 Railway applications. Track. Railbound construction and maintenance machines. Part 1: Technical requirements for running EN 14033-2:2017 Railway applications. Track. Railbound construction and maintenance machines. Part 2: Technical requirements for travelling and working

EN 14033-3:2017 Railway applications. Track. Railbound construction and maintenance machines. Part 3: General safety requirements EN 16432-1:2017 Railway applications. Ballastless track systems. Part 1: General requirements 97.040.20 Cooking ranges, working tables, ovens and similar appliances EN 13141-3:2017 Ventilation for buildings. Performance testing of components/products for residential ventilation. Part 3: Range hoods for residential use without fan EN 1860-1:2013+A1:2017 Appliances, solid fuels and firelighters for barbecueing. Part 1: Barbecues burning solid fuels. Requirements and test methods 97.040.99 Other kitchen equipment EN 16282-1:2017 Equipment for commercial kitchens. Components for ventilation in commercial kitchens. Part 1: General requirements including calculation method EN 16282-5:2017 Equipment for commercial kitchens. Components for ventilation in commercial kitchens. Part 5: Air duct; Design and dimensioning EN 16282-7:2017 Equipment for commercial kitchens. Components for ventilation in commercial kitchens. Part 7: Installation and use of fixed fire suppression systems EN 16282-8:2017 Equipment for commercial kitchens. Components for ventilation in commercial kitchens. Part 8: Installations for treatment of aerosol; Requirements and testing 97.100.10 Electric heaters EN 12098-3:2017 Energy Performance of Buildings. Controls for heating systems. Part 3: Control equipment for electrical heating systems. Modules M3-5,6,7,8 97.100.20 Gas heaters EN 14543:2017 Specification for dedicated liquefied petroleum gas appliances. Parasol patio heaters. Flueless radiant heaters for outdoor or amply ventilated area use 97.120 Automatic controls for household use EN 12098-1:2017 Energy Performance of Buildings. Controls for heating systems. Part 1: Control equipment for hot water heating systems. Modules M3-5, 6, 7, 8 EN 12098-3:2017 Energy Performance of Buildings. Controls for heating systems. Part 3: Control equipment for electrical heating systems. Modules M3-5,6,7,8 EN 12098-5:2017 Energy Performance of Buildings. Controls for heating systems. Part 5: Start-stop schedulers for heating systems. Modules M3-5,6,7,8

EN 15232-1:2017 Energy Performance of Buildings. Energy performance of buildings. Part 1: Impact of Building Automation, Controls and Building Management. Modules M10-4,5,6,7,8,9,10 EN 15500-1:2017 Energy Performance of Buildings. Control for heating, ventilating and air conditioning applications. Part 1: Electronic individual zone control equipment. Modules M3-5, M4-5, M5-5 EN 16946-1:2017 Energy Performance of Buildings. Inspection of Automation, Controls and Technical Building Management. Part 1: Module M10-11 EN 16947-1:2017 Energy Performance of Buildings. Building Management System. Part 1: Module M10-12 97.140 Furniture EN 1272:2017 Child care articles. Table mounted chairs. Safety requirements and test methods EN 14988:2017 Children's high chairs. Requirements and test methods EN 16890:2017 Children's furniture. Mattresses for cots and cribs. Safety requirements and test methods EN 16948:2017 Child protective products. Consumer fitted child resistant locking devices for cupboards and drawers. Safety requirements and test methods EN 16955:2017 Hardware for furniture. Tapered pressure tubes for self-supporting gas springs for the height adjustment of seating. Test methods and requirements for strength and durability EN 716-1:2017 Furniture. Children's cots and folding cots for domestic use. Part 1: Safety requirements EN 716-2:2017 Furniture. Children's cots and folding cots for domestic use. Part 2: Test methods 97.150 Non-textile floor coverings EN 16810:2017 Resilient, textile and laminate floor coverings. Environmental product declarations. Product category rules EN ISO 9405:2017 Textile floor coverings. Assessment of changes in appearance (ISO 9405:2015) 97.170 Body care equipment EN ISO 11609:2017 Dentistry. Dentifrices. Requirements, test methods and marking (ISO 11609:2017) 97.190 Equipment for children EN 1272:2017 Child care articles. Table mounted chairs. Safety requirements and test methods EN 14988:2017

Children's high chairs. Requirements and test methods EN 16890:2017 Children's furniture. Mattresses for cots and cribs. Safety requirements and test methods EN 716-1:2017 Furniture. Children's cots and folding cots for domestic use. Part 1: Safety requirements EN 716-2:2017 Furniture. Children's cots and folding cots for domestic use. Part 2: Test methods 97.195 Items of art and handicrafts EN 16853:2017 Conservation of cultural heritage. Conservation process. Decision making, planning and implementation EN 16883:2017 Conservation of cultural heritage. Guidelines for improving the energy performance of historic buildings 97.200.10 Theatre, stage and studio equipment, and work stations EN 13200-8:2017 Spectator facilities. Part 8: Safety Management 97.200.50 Toys CEN/TR 15371-1:2017 Safety of toys. Interpretations. Part 1: Replies to requests for interpretation of EN 71-1, EN 71-2, EN 71-8 and EN 71-14 CEN/TR 15371-2:2017 Safety of toys. Interpretations. Part 2: Replies to requests for interpretation of the chemical standards in the EN 71-series 97.220.10 Sports facilities EN 13200-8:2017 Spectator facilities. Part 8: Safety Management EN 15330-2:2017 Surfaces for sports areas. Synthetic turf and needle-punched surfaces primarily designed for outdoor use. Part 2: Specification for needle-punched surfaces for tennis and multi-sport surfaces