valve product portfolio - hpe€¦ · valves is the back-bone of ultra control valves. these valves...
TRANSCRIPT
VALVE PRODUCT PORTFOLIO Low Pressure Valves
ProfileHPE (Hydro Power Equipment) is a supplier of valves ranging from low
pressures up to 250 bar.
HPE supplies its own brand of valves (designed and manufactured by HPE
in South Africa) predominantly in the 50 to 250 bar range and is the agent
for the Ultra brand of valves mainly in the pressure ranges less than 50 bar.
Design and engineering
The HPE Innovation Team, in conjunction with the client, will look at the
challenges and application at hand and turn it into an innovative solution.
By utilizing the latest Solid Works Computer software, 3D Printing
technology, Computational Fluid Dynamics, Finite Element Analysis etc,
the team will find a safe workable solution to the customer’s needs.
Product and solution development
A dedicated research and test facility enables HPE to continually
strive towards new solutions to the industry’s demands for enhanced
performance and safety.
Implementation
The objective of this team is the transfer of knowledge and skills to the
end user which is fundamental for the sustainable success of any new
technology. The team consists of qualified instructors who are NQA
certified trainers and experts who interact with the users daily.
Quality assurance
HPE is ISO 9001 accredited.
Ultra ACV Control Valve
The Ultra ACV range of self-actuated pilot operated control valves is the back-bone of Ultra Control Valves. These valves are available in sizes 15mm to 1000mm and the standard pressure range is 25 bar to 100 bar. All functions such as Pressure Reducing, Pressure Relief, Flow Control, Level Control, Electronic Control and combinations are available.
Ultra ACV Ratio Reducing Valve
The Ultra ACV Ratio Reducing valve consists of a piston inside a body with no external piloting which cannot be adjusted or tampered with. Ductile iron with stainless steel trim.
Size: 50mm to 250mm
Pressure: 16 bar, 25 bar, 40 bar
Ratios available: 2:1, 3:1
Flow Control Valve (Maric type)
A very simple form of Flow Control with no possibility of tampering and very dirt tolerant. Ideally used for water saving or as a pressure distribution device.
Low Pressure High Pressure
Full Open Throttling
Control Ring
Control Valves
1
Ultra ACV
The Ultra ACV is the most common type of valve for use as a Pump Control/Check valve. It has the benefit of being self actuated and linked into the pump’s controls via solenoid and limit switch. The valve has the benefit of automatically shutting on electrical failure.
Size: 50mm to 1000mm
Pressure: 16 bar, 25 bar, 40 bar, 64 bar
Process Control Valve
Electrically or Pneumatically actuated globe and V-segment Ball Control Valves available.
Size: 80mm to 600mm
Pressure: Up to 150 bar
Pump Control Valve
2
BUTTERFLY VALVES
Ultra Utility Butterfly Valve
Wafer pattern style, rubberlined, choice of a stainless steel blade, electroless nickel plated (ENP) disc and with EPDM rubber liners. Choice of lever operated or gearbox.
Size: 50mm to 1000mm
Pressure: 16 bar
High Performance Butterfly Valve
Wafer pattern style, stainless steel disc with EPDM liner or a choice of different rubbers to suit the application. The valve has a square drive connection between disc and stem and the rubber is bonded to a removable phenol backing ring for long life and better sealing. Gearbox operated.
Size: 50mm to 1000mm
Pressure: 16 bar, 25 bar
Double Eccentric Soft Seated Butterfly Valve
Double Eccentric Butterfly valve, wafer pattern style with a removable seal in the disc and a stainless steel overlayed seat in the body with corrosion protection in strict accordance with SA Water Authority specifications.
Size: 80mm to 3500mm
Pressure: 10 bar, 16 bar, 20 bar, 25 bar, 40 bar
Isolating Valves
3
The Ultra MSV Triple Eccentric Butterfly Valve provides no rubbing between stainless steel disc seal and stainless steel body seat, therefore little or no wear and long life. Body seat is available in all welded construction or removable.
Body
O-ring
Disc
Multi-layer Sealing ring
Seal ring
Seal Protection ring
Laminar Disc Seal Available with welded stainless steel body seat or replaceable stainless steel body seat as shown above
Ultra MSV Butterfly Valve
Triple Eccentric Butterfly Valve with wafer style and a laminated stainless steel seal in the disc and body seat. Available in fully bi-directional or unidirectional.
Size: 50mm to 2000mm
Pressure: 16 bar, 25 bar, 40 bar, 64 bar, 100 bar, 150 bar
αº
γº
βº
Direction ofopening
Disc in openposition
2nd o
ff-s
et
1st off-setDisc inclosedposition
3rd. off-set(Angular)
Preferred flow direction
4
RSV Gate Valve
Flanged or socket ends with rising or non-rising spindle.
Size: 50mm to 1000mm
Pressure: 16 bar, 25 bar
Trunnion Mounted Ball Valve
Pipeline ball valves to API specification.
Size: 100mm to 1200mm
Pressure: 150 bar, 250 bar
Floating Ball Valve
Barstock, 2-piece, 3-piece, flanged or screwed.
Size: 25mm to 350mm
Pressure: 16 bar, 25 bar, 40 bar, 64 bar, 100 bar
Gate Valves
Ball Valves
5
Bonnet type Knife Gate Valve
Bonnet type Knife Gate Valve with WCB or stainless steel
body and stainless steel blade.
Size: Up to 2000mm
Pressure: 16 bar, 25 bar
Metal Seated Ball Valve
Metal Seated Ball Valve for high abrasive and high temperature applications.
Ball Valves
Knife Gate Valves
6
Silent Disc Check Valve
The valve of choice and superior in performance to standard swing check valves with a low pressure drop and fast closing.
Size: 50mm to 600mm
Pressure: 16 bar
Nozzle Check Valve
Ideal for waterhammer conditions and when a low pressure drop is a requirement.
Size: 100mm to 1200mm
Pressure: 16 bar, 25 bar, 40 bar
Ball Check Valve
Excellent for sewage and slurry applications.
Size: 50mm to 500mm
Pressure: 16 bar
Flex Check Valve
Rubber coated disc without hinge. Suitable for sewage and slurries. Available with hydraulic damper.
Size: 50mm to 800mm
Pressure: 10 bar, 16 bar
Check Valves
7
Pressure Reducing Station
The Ultra range is suitable for pressure reducing stations with working pressures up to 50 bar. Can either be a fixed differential pressure ratio or with an adjustable pressure regulating valve to suit the downstream demand.
Dual leg with automatic shut down and start up system.
Size: 50NB to 250NB
Pressure: 16 bar, 25 bar, 40 bar, 50 bar
8
Tel: +27 11 462 1903
Fax: +27 11 462 5098
E-mail: [email protected]
Website: www.hpesa.com
19 Precision Street, Kya Sand, Randburg
PO Box 1148 Honeydew 2040
Republic of South Africa