version 15.0.3 release...

MapInfo ProVersion 15.0.3

Release Notes

Contents:

MapInfo Pro 15.0.3 Release Notes 2System Requirements 2Upgrading MapInfo Pro 2Advanced Installation for System Administrators 3MapInfo Pro 15.0.3 4MapInfo Pro 15.0.2 6MapInfo Pro 15.0.1 7

MapInfo Pro 15.0.3 Release Notes

This document provides information on new and enhanced features that are introduced into MapInfoPro. It also provides information about resolved issues and known issues that are important toMapInfo Pro users.

System Requirements

This product is tested on the following Microsoft Windows Desktop Operating Systems:

• Windows 10 64-bit• Windows 10 32-bit• Windows 8.1 64-bit• Windows 8.1 32-bit• Windows 7 64-bit SP1• Windows 7 32-bit SP1• Windows 2012 Server R2 64-bit• Windows 2012 Server R2 64-bit with XenApp 7.5• Windows 2008 Server R2 64-bit SP1• Windows 2008 Server R2 32-bit SP1• Windows 2008 Server R2 64-bit SP1 with XenApp 6.0

Upgrading MapInfo Pro

Your computer must be connected to the Internet to download theMapInfo ProMaintenance Release.

You may install this Maintenance Release provided any of the following products are installed:

• MapInfo Pro 15.0, 15.0.1 or 15.0.2• MapInfo Pro Runtime 15.0, 15.0.1 or 15.0.2

To upgrade MapInfo Pro to version MapInfo Pro Maintenance Release:1. On the Help menu select Check for Update to open the Maintenance Releases for MapInfo

Pro web page.

2MapInfo Pro 15.0.3 Release Notes


2. On the web page, click the download link and follow your web browser's instructions for openingand running the patch file.

The file is called MapinfoPro15.0.3MaintenanceRelease.exe, should you choose to saveand run it later.

3. Follow the instructions to complete the upgrade.

It is important to wait until the installation completes.

Advanced Installation for System Administrators

This section is for the system administrator installing this Maintenance Release using a commandline, and the network system administrator installing this Maintenance Release across the networkusing a Microsoft Patch (MSP) file.

Upgrading Using a MSP File

The MSP file for the MapInfo Pro Maintenance Release updates the English release of MapInfo Pro15.0, 15.0.1 and 15.0.2. It does not update:

• Non-English versions of MapInfo Pro 15.0• MapInfo Pro Runtime 15.0

The MSP file is available for download from:www.pbinsight.com/support/product-downloads/item/MapInfo-Pro-v15.0.3-Maintenance-Release-MSP-file

Install this Maintenance Release with elevated privileges. To do this, right-click on the Command-LineInterpreter (cmd.exe) and select Run as Administrator from the popup menu, then continue withthe following instructions.

To run the Maintenance Release MSP file, type:

msiexec /p <path to the MapInfoPro15.0.3MaintenanceRelease.msp file>REINSTALL=ALL REINSTALLMODE=omus

Where:

• /p = applies the latest patch

You may see a prompt for permission to continue. Click Allow or OK to proceed (if you do notrespond and the message times-out, then the upgrade is unsuccessful).



http://www.pbinsight.com/support/product-downloads/item/MapInfo-Pro-v15.0.3-Maintenance-Release-MSP-file

You can upgrade silently by adding a silent parameter switch to the command, such as /qb, /qn, /qr,or /q. For example:

msiexec /p <path to the MapInfoPro15.0.3MaintenanceRelease.msp file>REINSTALL=ALL REINSTALLMODE=omus /qb

Where:

• /qb = to see a basic progress dialog box during the installation

Upgrading in Silent Mode

To run the MapInfo Pro Maintenance Release installer in silent mode, from a command promptchange directories (cd command) to where the Maintenance Release .exe file is, and then type:

MapInfoPro15.0.3MaintenanceRelease.exe /s /v"SILINST=True"

Where:

• /s = runs the setup.exe silently• /v = passes the parameter "SILINST=True" to suppress the GUI.

A progress dialog box may display during the installation.

You may see a prompt for permission to continue. Click Allow or OK to proceed.

MapInfo Pro 15.0.3

This section lists the updates made since the release of 32-bit MapInfo Pro 15.0.2.

Progress and Resolution of Outstanding Issues

MapInfo Pro

Description and ResolutionIssue Number

Refreshing aWFS table containing a Date field from aWFS 1.0.0 server makes the Date field NULL.

Resolution: Fixed.

MIPRO-96534




MapInfo Pro closes unexpectedly when adding a map to a Layout Designer.

Resolution: Fixed.

MIPRO-95364

Orthogonal Polygons are not correctly created using the Polyline tool.

Resolution: Fixed.

MIPRO-95357

MapInfo Pro closes unexpectedly while using Polyline Split at Node.

Resolution: Fixed.

MIPRO-95344

Opening large number of tables together in a MapInfo Pro workspace results in lowering ofperformance.

Resolution: Fixed.

MIPRO-95000

MapInfo Pro closes unexpectedly while using the Set Window command.

Resolution: Fixed.

MIPRO-94841

While using custom tools, panning by pressing the mouse wheel resets the selected custom tool tothe default Select tool.

Resolution: Fixed.

MIPRO-94440

MapInfo Pro closes unexpectedly while executing an SQL query with missing double quotes in theWHERE clause.

Resolution: Fixed.

MIPRO-94191

Bing Roads and Hybrid base maps are missing certain roads.

Resolution: Fixed.

MIPRO-94038

Certain symbols and fonts are not displayed on the map.

Resolution: Fixed.

MIPRO-76240

Dialog strings in MapBasic tools as well as custom dialog strings are getting clipped.

Resolution: Fixed.

MIPRO-52623



MapInfo Pro 15.0.2

This section lists the updates made since the release of 32-bit MapInfo Pro 15.0.1.

New and Changed Features

This release uses the Microsoft Bing REST service instead of the Bing SOAP service, because theBing SOAP Service is deprecating at the end of June 2017. This change affects the Move Map Tofeature, but there is no change to how you work with MapInfo Pro and there is no interruption to thisMicrosoft Bing service.


MapInfo Pro


The Web Map Service (WMS) and Envinsa Geocoding service are not working when using a proxyserver to connect to them.

Resolution: Fixed.

MIPRO-90283

MapInfo Pro 15.0 x86 on Windows 10 closes unexpectedly: sometimes silently and sometimes withan error message.

Resolution: Fixed.

MIPRO-91768

MapInfo Pro closes unexpectedly when closing a dialog from a custom MapBasic application thatcalls .NET code to open a browser.

Resolution: Fixed.

MIPRO-92756



MapInfo Pro 15.0.1

This section lists the updates made since the release of 32-bit MapInfo Pro 15.0.

New Features

Two new ellipsoid definitions are included with this 15.0.1 release, GSK-2011 and PZ-90.11.

Using a new ellipsoid in any TAB, MIF, or WOR file upgrades the file version to 1501. However, theellipsoid definition does not exist in MapInfo Pro 15.2.x and 16.0, so the following occurs when usingthese versions of MapInfo Pro with a 1501 table:

• Opening a table causes the CoordSys of the table to default to the WGS84 ellipsoid definition.• Opening a workspace that uses a Set Map CoordSys statement with the new ellipsoid generatesan invalid ellipsoid error and the map CoordSys defaults to the WGS84 ellipsoid definition.

• Issuing a MapBasic Set CoordSys from an MBX or MapBasic Window generates an invalidellipsoid error.

• Importing a MIF file that uses a new ellipsoid in a Coordsys clause generates an invalid ellipsoiderror.

Inverse Flattening (1/f)Major Semi AxisEllipsoid NameEllipsoid Number

298.25641516378136.5GSK-201156

298.257846378136.0PZ-90.1157

For further information, see:

• Datum parameters (page 3) for GSK2011:https://www.fig.net/resources/proceedings/fig_proceedings/fig2015/ppt/ts02g/TS02G_karpik_gienko_7538_ppt.pdf

• Datum parameters (page 11) for PZ-90.11:http://geophy.uni.lu/users/tonie.vandam/REFAG2014/SESS_IV_Reg_Ref_Frames/Tatevian.pdf



https://www.fig.net/resources/proceedings/fig_proceedings/fig2015/ppt/ts02g/TS02G_karpik_gienko_7538_ppt.pdf

http://geophy.uni.lu/users/tonie.vandam/REFAG2014/SESS_IV_Reg_Ref_Frames/Tatevian.pdf


MapInfo Pro


The raster reprojection preference is not applied to images when opening a new map with a raster.

Setting Image Processing > Reprojection to Always or Optimized when the Map window wascreated by initially adding a raster layer causes the reprojection to not work properly and the imageto display without the reprojection.

MIPRO-21266

Resolution: Fixed. The Map window now correctly honors the reprojection preference.

I am unable to change the object style of the points in an Access ODBC table.

Resolution: Fixed.

MIPRO-43569

Clearing the selection from a seamless table causes MapInfo Pro to close unexpectedly.

This issue occurs after making a selection from a table that is part of a seamless table and thenclearing the selection by clicking elsewhere in the Map window, or when unselecting all. This alsooccurs when closing a named selection table created against a seamless table.

MIPRO-44181

Resolution: Fixed.

There are multiple issues that occur when using theWindows Device Clipping clip region options(found in Map Options):

MIPRO-47246

• There are issues drawing outside the clip region, or sometimes not drawing inside of the clipregion.

• Some issues are seen on-screen and others are only seen when printing or exporting.• Some issues involve a stand-alone Map window, while others involve putting the Map windowinto a layout frame.

• The clip region behavior may vary depending on if Enhanced Rendering was turned on or off.• There are redraw issues when moving labels in a map that has a clip region.• There are redraw issues when panning a Map window that contains a clip region.

Resolution: Fixed.

Label Visibility is being set to Off instead of enabling the zoom range while writing to a .MWSworkspace.

Resolution: Fixed. Label visibility was incorrectly being set to Off when the feature layer visibilitywas off, even though label settings had a zoom range specified. This is now fixed.

MIPRO-47756




Printing Pie Charts from MapInfo Professional 12.0 causes the legend to display incorrectly.

This issue also affects Bar charts, and both Pie and Bar Theme legends are printing at the wrongsize.

MIPRO-48121

Resolution: Fixed.

Interleaved objects are not drawn on the cosmetic layer.

Resolution: Fixed. Starting with version 10.5 interleaved line styles were no longer being drawncorrectly in the cosmetic layer which is now fixed.

MIPRO-56013

When printing, the label line appears when it should not.

Resolution: Fixed. Issues during print and screen draws when zooming in very close on labelcallouts have been resolved.

MIPRO-62171

see MIPRO-47246

Resolution: Fixed.

MIPRO-62691

There is an issue when changing the value of the Ignore Zeroes and Blankscheck box on charactercolumns in the Create Thematic Map dialog and switching between pages 2 and 3 of the dialog.

Resolution: Fixed.

MIPRO-64064

see MIPRO-47246

Resolution: Fixed.

MIPRO-63311

see MIPRO-47246

Resolution: Fixed.

MIPRO-63947

see MIPRO-47246

Resolution: Fixed.

MIPRO-64006

see MIPRO-47246

Resolution: Fixed.

MIPRO-64014

see MIPRO-47246

Resolution: Fixed.

MIPRO-64198




When Exporting a layout the area does not scale to the image size.

Exporting from a Layout Designer window using the Save Window As command does not scalethe layout and its contents to the specified custom size.

MIPRO-65233

Resolution: Fixed.

Printing large symbols sometimes can cut off part of the symbol.

This issue occurs, because the 32-bit versions of MapInfo Pro is running on a 64-bit operating systemand is not able to read a registry setting.

MIPRO-65433

Resolution: Fixed. MapInfo Pro now reads the registry setting.

When this occurs, enable the following DWORD registry key MBRExtraPoints under[HKEY_LOCAL_MACHINE\SOFTWARE\MapInfo\MapInfo\Common]. Set the valueto be the extra number of points to add to the search Minimum Bounding Rectangle (MBR) usedwhen drawing objects. For example, if the largest symbol style to be drawn is 150 pts, then set thevalue of MBRExtraPoints to 150 (as a decimal value).

Setting the transparent color in theAdjust Image Styles dialog is not applied when choosing a colorother than black.

Resolution: Fixed.

MIPRO-71494

In the English version of MapInfo Professional, legends are missing in the Layout window in aworkspace when it was created using Danish MapInfo Professional.

MapInfo Professional uses a DWORD registryHKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\MapInfo\MapInfo\Common\WriteWindowTitle

MIPRO-71572

with value 1 to create workspaces that can be shared across locales. If the registry is present onthe machine, MapInfo Professional explicitly sets the title of the various windows in the workspace.However, this is not happening for Legend Designer windows.

Resolution: Fixed for Legend Designer and cartographic Legend windows. This is a systemlimitation and is not fixed for standard MapInfo Pro theme legend windows.

Copying data from one table to another creates a pending edit on the original table.

Resolution: Fixed.

MIPRO-71906

The Style Override dialog can be moved behind the Layer Properties dialog.

This issue exists with xvt modal dialogs for integrated mapping applications.

MIPRO-72517

Resolution: Fixed.




Image processing settings do not save to the workspace (*.WOR) unless the map contains rasterlayers.

Resolution: Fixed. MapInfo Pro saves image processing settings to the Workspace (*.WOR), evenwhen there are no raster layers in the map. MapInfo Pro also continues to save image processing

MIPRO-75531

settings when the map contains raster layers and Image Processing is set toAlways orAutomaticor if the Resampling Method is set to Cubic Convolution.

see MIPRO-47246

Resolution: Fixed.

MIPRO-77610

The following MapBasic application error displays in MapInfo Pro 15.0: "Unable to translate theSpatial Constraint".

Resolution: Fixed.

MIPRO-79376

The Unselect All button is active when the Browser window is open and nothing is selected.

Switching from the Map window to the Browser window when there is no selection causes theUnselect All button to become active when it should be inactive.

MIPRO-81232

Resolution: Fixed.

The AGIS Browser closes unexpectedly with .Net Framework 4.6.2

This issue is caused by .Net Framework 4.6.2, which is part of the Microsoft Anniversary Update,and happens when putting a Browser into a layout, printing a Browser, or exporting a Browser(using Save Window As).

MIPRO-83395

Resolution: Fixed. Microsoft will offer a Hot Fix for this issue that includes a more comprehensivefix. Watch for this upcoming Hot Fix to apply it to other versions of MapInfo Pro.

It can take a long time to open workspaces after installing the Microsoft Anniversary Update onWindows 10.

Resolution: Fixed.

MIPRO-86473



version 15.0.3 release...

Documents