visio-custom functions 7d mkii version d · &86720 )81&7,216 iru (26 ' 0dun ,,...

$: Visio-Custom Functions 7D MKII Version D · &86720 )81&7,216 iru (26 ' 0dun ,, $qg\4xlqodq#hlufrp qhw 0xowl &rqwuroohu 4xlfn &rqwuro 'ldo 4xlfn &rqwuro 0hqx 1hz $) $uhd 6hohfwlrq$
18 CUSTOM FUNCTIONS for EOS 7D Mark II

[email protected]

Multi-Controller

Quick Control Dial

Quick ControlMenu

NewAF AreaSelection lever.(Clockwise only)

Rate

(50 Different Settings)

SET

- Picture Style- Multiple Exposure- HDR

©

Creative Photo Button

New - Push tochange Mode

June 16th 2016 Version Dhttp://gui2-for-exiftool.weebly.com/

Page 2(35)

CustomFunction Function Description Setting Options My Setting

EOS 7D Mark II Custom Function Chart

http://gui2-for-exiftool.weebly.com/ [email protected] June 16th 2016 Version D©

1 Exposure level increments 1/3-stop1/2-stop

23

4

ISO speed setting increments 1/3-stop1-stop

C.Fn1: Exposure

Bracketing auto cancel

Auto Exposure Bracketing sequence

On :Enable(AEB , WB-BKT)

(Cancelled at Power Off-Default)

(NOT Cancelled at Power Off)

(Normal, Under, Over)(Under, Normal, Over)

AEB Auto Exposure BracketingWB-BKT White Balance Bracketing

Order in which Bracketing Changes are applied

(See user manual - pages 434 - 443)

5 Number of Bracketed Shots 3 (Default 3 Shots )2 Shots5 Shots7 Shots

1234567

A B

OFF: Disable

The AEB shooting sequence and whitebalance bracketing sequence can be changed.

0 - + : 0, -, +- 0 + : -, 0, ++ 0 - : +, 0, - (Over, Normal, Under)

The number of shots taken with AEB and (WB)WhiteBalance bracketing can be changed from thedefault, 3 shots, to 2, 5, or 7 shots.When [Bracketing sequence: 0, -, +] is set, the bracketed shots will be taken as shown in the table below.

If [2 shots] are set, you can selectthe + or - side when setting theAEB range.Setting WB bracketing will resultin a decreased exposure in theB/A or M/G direction.B/A Blue AmberM/G Magenta Green

B/A: Blue Amber Direction M/G: Magenta Green Direction

Page 3(35)



http://gui2-for-exiftool.weebly.com/ [email protected] Version DJune 16th 2016©

AEB Auto Exposure Bracketing / contd5A B

3 (Default 3 Shots )

3 Shots 0, +1, +2

5 Shots -2, -1, 0, +1,+2

1 Shot +1,

You can do this individually in Single ShootingDrive Mode : using Shutter Click per selectedAEB number setting.

orYou can set the camera on Continuous DriveMode to take them all quickly in a row with oneShutter Click, and it will pause after theselected AEB number setting.

Page 4(35)




B/A Blue AmberM/G Magenta Green

WB-BKT White Balance Bracketing / contd A B

Page 5(35)




6

7

Safety shift

ISO :

DisableShutter speed/Aperture(NOTE: If Enabled Tv / Av behaves

like “P” at Low or lnsufficient Light)

Same Exposure for New Aperture

OFFTv/Av

ISO Speed

A B

This takes effect in the shutter-priority AE (Tv)and aperture-priority AE (Av) modes. If thesubject brightness changes and the standardexposure cannot be obtained within theautoexposure range, the camera will automaticallychange the manually-selected setting to obtain astandard exposure

This works in the Program AE (P), shutter-priority AE (Tv), and aperture-priority AE (Av)modes. If the subject brightness changes andthe standard exposure cannot be obtainedwithin the autoexposure range, the camera willautomatically change the manually set ISOspeed to obtain a standard exposure.

OFF: Disable

ISO: ISO speed

Tv: Shutter speed

This function does NOT work with macrolenses whose actual aperture f/numberchanges when the magnification changes.This function does not work with movies.

Under [ 2: ISO speed settings], even if[ISO speed range] or [Min. shutter spd.] ischanged from the default setting, safety shiftwill override it if a standard exposure cannotbe obtained.The minimum and maximum ISO speeds of thesafety shift using the ISO speed will bedetermined by the [Auto ISO range] setting(p.158). However, if the manually set ISO speedexceeds the [Auto ISO range], the safety shiftwill take effect up or down to the manually setISO speed. Safety shift will take effect ifnecessary even when flash is used.

Page 6(35)




C. Fn.2: Exposure / Drive

89

10

C. Fn.2: Exposure / Drive A B1

3

Set Shutter Speed Range Tv & M modes

Continuous Shooting Speed

Highest Speed

Min. Aperture (Max. f/) From f/91 to f/1.4

High Speed2 to 10 Frames per second (fps)

1/8000 sec to 15 secLowest Speed 30 sec to 1/4000 sec

2 Set Aperture Range (in Av, M, B modes)

Max. Aperture (Min. f/) From f/1.0 to f/64

Low Speed1 to 9 Frames per second (fps)

Silent Continuous Shooting1 to 4 Frames per second (fps)

(See user manual - pages 438 - 439)

You can set the shutter speed range. In the <Tv><M> modes, you can set the shutter speedmanually within the shutter speed range that youhave set.In the <P> <Av> modes, the shutter speed will beset automatically within the shutter speed rangethat you have set.

You can set the aperture range. In the <Av> <M><B> modes, you can set the aperture manuallywithin the aperture range that you have set.In the <P> <Tv> modes, the aperture will be setautomatically within the aperture range that youhave set.

(Depends on your Lens)

You can set the continuous shooting speedfor < H> high-speed continuous shooting,< > low-speed continuous shooting,and < S> silent continuous shooting.

Page 7(35)




C. Fn.3: Display / Operation

111213141516

C. Fn.3: Display / Operation A B1

(See user manual - pages 440 - 442)Focusing Screen

Warnings in Viewfinder2

Std.: Eh-AL

PEh-S: Eh-S

Standard screen provided with thecamera. Precision Matte standardfocusing screen.

Super Precision Matte focusing screen makesit easier to distinguish the focus point than withthe standard Precision Matte Eh-A focusingscreen. It is ideal for fast lenses having amaximum aperture of f/2.8 or larger. Geared formanual focusing.However, if the lens maximum aperture issmaller than f/2.8, the viewfinder will lookdarker than with the Eh-A focusing screen.

When any of the following functions are set,the < > icon can be displayed in the viewfinderand on the LCD panel (pages 26-27).

!

!

When monochrome is set

When WB is corrected

When one-touch image quality is set

When is set

When spot metering is set

If the Picture Style is set to [Monochrome](page.162), the warning icon will appear.

If white balance correction (page.172) isset, the warning icon will appear.

If you change the image-recording quality withthe one-touch image quality function (page.456),the warning icon will appear.

If the metering mode is set to [Spot metering](page 225), the warning icon will appear.

If [ 3: High ISO speed NR] is set to [MultiShot Noise Reduction] (page176), thewarning icon will appear.

Page 8(35)




Live View shooting Area Display

Dial direction during Tv / Av

Multifunction Lock

4

5

6 Custom Controls

3A BC. Fn.3: Display / Operation

When the aspect ratio for Live View shooting(page295) is set to [4:3], [16:9], or [1:1], you canset the display method for the shooting area.

: Masked

: Outlined

: Normal

: Reverse directionDial turning direction when setting the shutterspeed and aperture can be reversed.In the <M> shooting mode, the turning direction ofthe < > and < > dials will be reversed. In othershooting modes, the turning direction of only the< > dial will be reversed. The < > dial's turningdirection in the <M> mode and the turning directionto set the exposure compensation in the <P>,<Tv>, and <Av> mode will be the same.

When the < > switch is set to the right, it canprevent the < >, < >, < >, and < > fromaccidentally changing a setting.Select the camera control you want to lock, thenpress < > to append a checkmark [ ]. Select[OK] to register the setting.

Main DialQuick Control DialMulti-controllerAF area selection lever

If the < > switch is set and you try to use one ofthe locked camera controls, <L> will be displayed inthe viewfinder and on the LCD panel. Also, [LOCK]will be displayed in the shooting settings display(p.60).

You can assign often-used functions to camerabuttons or dials according to your preferences.For details, see page 445.

If you lock, the < > dial will be locked by default.Even if the < > dial is appended with a [ ]checkmark, you can still use the touch pad < >.

See Pages 9-14

Page 9(35)




6 Custom Controls /contd A B

a) b) c)

a)b) c) d)e)

a)b) c) d)e)

a) b) c) d)e) f)

a) b) c) d)e) f)

See pages 13-14 also

1

3

2

5

4

Page 10(35)




A B

a) b) c) d)e) f)

a) b) c) d)

a) b)

a) b) c)

a) b)

See pages 13-14 also

7

6

10

8

9

Page 11(35)




Assign the” AF area selection Lever ” to: Direct AF Area Selection

Options: See pages 13-14

11

Page 12(35)




12

Page 13(35)




See Page 452 ...

Page 14(35)




Page 15(35)




C. Fn.4: Others

C. Fn.5: Clear

1718

C. Fn.4: Others A B

OFF : Off6:6 : Aspect ratio 6:63:4 : Aspect ratio 3:44:5 : Aspect ratio 4:56:7 : Aspect ratio 6:75:6 : Aspect ratio 10:125:7 : Aspect ratio 5:7

If you set cropping information, vertical lines for the aspectratio you have set will appear on the Live View image. Youcan then compose the shot as if you were shooting with amedium- or large-format camera (6x6 cm, 4x5 inch, etc.).When you take a picture, the aspect ratio information forcropping the image with the EOS software will be appendedto the image. (The image is recorded to the card withoutbeing cropped.)After the image is transferred to a computer, you can useDigital Photo Professional (EOS software, p.537) to easilycrop the image to the aspect ratio that was set.

If [ 5: Aspect ratio] is set to any setting other than[3:2], the cropping information will not be appended to theimage.Cropping information will also be appended forviewfinder shooting. However, the cropping informationwill not be displayed.If cropping information is added to a RAW image, the imagecannot be cropped with the camera's RAW image processing.

1

2

Add Cropping information

Default Erase option : [Cancel] selected: [Erase] selectedIf [Erase] is set, be careful notto erase an image accidentally.

My A Settings check Date:________________My B Settings check Date:________________

Shoot 5 Menu

3:24:316:91:1

Aspect Ratio OptionsDefault

Page 16(35)EOS 7D Mark II : AF Tab Related


Click the <INFO> while any [Case] is selected, and a description of AF SettingCharacteristics or Shooting Scene Example is displayed.

Pressthe INFObutton

Contentdisplays onthe helpscreen

Each of the six cases can be further fine-tuned by pressing the RATE button, and then adjustingany of the three important AI Servo AF parameters:- [Tracking sensitivity],- [Accel./decel. tracking], and/or- [AF pt auto switching].



Rapid and concise tailoring of the EOS 7D Mark II'sfocus tracking in AI Servo AF is done here, in the[AF1] menu tab with the AF Configuration Tool. Six“Cases” optimize the camera for different types ofmoving subjects, and are discussed on thefollowing pages.

The AF1 tab: Canon's AF Configuration Tool

AF2: AI Servo AF shutter timing, fps rateFine-tuning of shooting speed and shutterrelease timing with moving subjects in AI Servo AF

AF3: One-Shot AF; AF-assist beam; etc.Settings related to focusing and shutter-releasetiming when using One-Shot AF release priority

AF4: AF point management, etc.Control of AF points, for both manual andautomatic AF point selection

AF5: AF displays in viewfinder, etc.How AF points are displayed in finder, andcontrol of AF Microadjustment

Case 1: is the basic AI Servo AF setting

Case 1 is the recommend setting to startshooting action subjects, and is the camera’sdefault setting when you take it out of the box.

Default000



Case 2 : Continue to focus on an original subject, even when obstacles may quickly appear

Case 3: The opposite of Case 2 instantly focus on any new subject at the active AF point

Case 4: Set AI Servo AF to expect and react quickly to changes in subject speed

This is a situation where you anticipatea hiding wild bird jumping out from a nearby nest.With Case 3, AF will respond immediately — waitfor the moment the bird appears,you can quickly focus and shoot continuously.

Any time subjects may move quickly from side toside, it's possible for the AF point to suddenly beupon something like the background.Case 2 delays any change to AF in these cases,tending to lock-on to the original subject even if theAF point momentarily leaves that subject.

Continuously track subjects as they suddenlyslow down and speed up

Case 5: Speed up the rate that AF points change, when using any expanded AF AreaIt works in any of the following AF Area settings:• AF Point Expansion (4 surrounding points)• AF Point Expansion (8 surrounding points)• Zone AF• (new) Wide Zone AF• Automatic AF Point selection

Case 6: Two AF parameters combine, to focus-track the most challenging of moving subjects

Case 6 is a setting that combines features of bothCase 4 (support for sudden changes in speed),and Case 5 (support for erratic movement in anydirection).

A B

Default-100

Default+110

Default010

Default001

Default011

My Setting



Page 219

Page 217

Exposure level indicator - UNDEREXPOSURE

Exposure level indicator - OVEREXPOSURE



65 Auto Focus Points. 252 Metering Zones (21 x 12)21

12

0

+

-

Page 22(35)

http://gui2-for-exiftool.weebly.com/ [email protected]

EOS 7D Mark II AF Area Selection Modes

Version DJune 16th 2016©

Sixty-five AF points, with a full range of AF Area options-- work with anywhere from one single point to the entire 65-points

AF Area: change the size of your active AF point

b) AF Area Selection lever.a) Press the button

orb) Use Main dial rather than the AF Area selectionlever as you can select: - Clockwise or Anti Clockwise (quicker).

The AF Area Selection Lever only selects Clockwise

(Press Right - Clockwise only)

AF Area Selection Lever

Main Dial

AF Point selection button

SET Quick Control Dial

Main Dial

HorrizontalSelection

VerticalSelection

Page 23(35)

http://gui2-for-exiftool.weebly.com/ [email protected]

EOS 7D Mark II AF Area Selection Modes

Version DJune 16th 2016©AI Servo AF

Seven Options: let you define how large an area you use to focus

1 2 3 4 5 6 7

Single point Spot AF Single point AF

AF point Expansion AF point Expansion Surroundingpoints

Zone AFLarge Zone AF

One Shot AFLens Groups A...D 65 pointsLens Groups E...F 45 points

NOTE

VerticalSelection -Quick controldial

SET

1 2

3 4

5

7

6

7

Page 24(35)

http://gui2-for-exiftool.weebly.com/ [email protected] Version D

EOS 7D Mark II - High performance Cross Type AF points

June 16th 2016©

AF Area: Change the size of your active AF pointSeven options let you define how large an area you use to focus

Reduce the size of an AF point, for even more precise focus

Spot AF also effective for when you wantto focus on a small area of a subject

AF point expansion Increase the size and AF coverage of an AF point.Excellent AF Area choice for sports andrapidly-moving subjects

(4 surrounding AF points) (8 surrounding AF points)

Spot AF252 Metering Zones (12 x 21) 150k RGB+IR

(Single point AF)

The Partial Area that’s Metered is always in the Centre

21

12 Spot Metering Centre Point(is NOT linked to a Focus Point)

Partial Metering isalways in Centre

Expand AF Area Expand AF Area:Surround

Manual Select: Spot AF

Page 25(35)



June 16th 2016©

Zone AF Full-time AF coverage, over a larger AF Area.A moveable “cluster” of AF points;camera focuses on nearest subject in the Zone

Large Zone AF The Zone AF concept, on a larger scaleSelect any of three zones, for broad-area AF and all points within the Zone active

Select from three zones:Left, Center, Right

Left

Center

Right

(12 point AF cluster) (15 point AF cluster) (12 point AF cluster)

(Top Right)(Top Centre)

(15 point AF cluster)

(Centre)


(Lower Centre)





(Centre Right)

(Top Left)

(Lower Right)

(Centre Left)

(Lower Left)

(20 point AF cluster) (20 point AF cluster)


252 Metering Zones (12 x 21)9 Zones [6x12 + 3x15]

Manual Select

Page 26(35)



June 16th 2016©

Automatic AF point selectionAll 65 AF points active, camera selects the point for you

Effective shooting of centered and off-center subjects — moving and stationary

One-Shot AF AI Servo AFWith [One-Shot AF], the camera picks the point(s) tofocus on the nearest detailed subject. When using [AI Servo AF], AF starts from one manuallyselected AF point, and then can change points to follow itover the full 65-point AF array.252 Metering Zones (12 x 21) 150k RGB+IR

Auto Selection: 65 point AF AI Servo AF from manuallyselected AF point

Note: A registered AF Point Blinks in the following AF Selection only:a) Manual Select: Zone AF [ 12/15 point clusters]b) Manual Select: Large Zone AF [ 20/25 point clusters]

Dimmed Menu Itemsa) Dimmed Menu Items cannot be Setb) The Menu Item is dimmed if another Function Setting is overriding itc) You can see the Overriding Function by selecting it the Dimmed item and press <Set>

Page 27(35)EOS 7D Mark II : Shoot 1-6 & AF 1-4 Menus


Shoot 1

Shoot 2

Shoot 3

Shoot 4

Shoot 6

Shoot 5

AF1

AF2

AF3

AF4

AF5

Page 28(35)EOS 7D Mark II : Playback 1-3 & Setup 1-4 Menus


Playback Menu 1

Playback Menu 2

Playback Menu 3

Setup 1 Menu

Setup 2 Menu

Setup 3 Menu

Setup 4 Menu

< Note

Page 29(35)


Page 30(35)


Page 32(35)


Picture Style

Page 33(35)


White Balance

Page 34(35)


APERTURE Stops F/1 ..F/221/3 Stop Steps ½ Stop Steps

F/1.2

F/1.4

F/1.7

F/2

F/2.4

F/2.8

F/3.4

F/4

F/4.8

F/5.6

F/6.7

F/8

F/9.5

F/11

F/1.4

F/1.1F/1.3

F/13

F/16

F/22

F/1 F/1

F/22

F/16

F/11

F/8

F/5.6

F/4

F/2.8

F/2

F/1.6F/1.8

F/2.2F/2.5

F/3.2F/3.6

F/4.5F/5

F/6.3F/7.1

F/9F/10

F/18F/20

F/19

F/13F/14

1 Stop StepsISO Stops 100 ..1600

1/3 Stop Steps

200

400

800

1600

3200

6400

12800

200

125160

16000

100 100

16000

12800

6400

3200

1600

800

400

250320

500640

10001250

20002500

40005000

800010000

H1(2560)H2(51200) H2(51200)

½ Stop StepsSHUTTER SPEED Stops 1 ..1/8000

1/3 Stop Steps

1/15

1/30

1/60

1/125

1/60

1/30

1/15

1/101/13

1/201/25

1/401/50

1/10

1/20

1/45

1/250

1/500

1/1000

1/2000

1/40001/4000

1/8000

1/81/8

1/51/6 1/6

1/41/4

0,40.3 0.3

0.50.50.71 sec1 sec

0.60.8

1/500

1/8000

1/2000

1/1000

1/250

1/125

1/90

1/180

1/350

1/750

1/1500

1/3000

1/600

1/801/00

1/1601/200

1/320

1/6401/800

1/2500

1/16001/1250

1/3200

1/50001/6400

1/400

EXPOSURE: Stops & Aperture Diameter, ISO Speed, Shutter Speed

( EOS 7D Mk II )

STOP

S are i

nterch

angeab

le

Halvin

g

Halvin

g

Doub

ling

Doub

ling

Doub

ling

Halvin

g

A STO

P is a

Doub

ling o

r Halv

ing of

the a

moun

t of L

ight le

t in at

Expo

sure

Page 35(35)


1. Manually Select Focus Point ( it gives you Control)2. Focus and Recompose (and when not to - Fails in Depth of field)Move parallel to recompose3. Look for Edge Contrasts between Light area and Dark area (use Centre X-Point)4. When to use Manual Pre-Focus (Action Shots). Auto Focus first then switch to Manual (you know where the action is going to be - but not when)

5. Use Live View for Perfect Manual Focus - Magnify x 10 for spot on6. AI SERVO High Speed Shooting [1/1000 - 4/1000] - Turn off IS to speedup Autofocus and increase Hit rate

7. Use Back Buton Focus - for Faster shots8. ONE SHOT AF Use for Portraits and stationary subjects

Focus Tips used by Professionals

9. AI SERVO AF10. AI FOCUS AF

Ideal for moving subjects - the AF continually adjusts to track.Ideal for Weddings - Static and Moving subjects

Back ButtonFocus

AE LockButon

e.g. - Motor Racing at a bend in road- Horse Jumping

e.g. - Flying Aircraft

AI SERVO High Speed Shooting [1/1000 - 4/1000] - Turn off IS to speed upAutofocus and increase Hit rate

visio-custom functions 7d mkii version d · &86720 )81&7,216 iru (26 ' 0dun ,,...

Documents