vision application specification - eyetech...digital i/o rs232 ethernet / tcp ip other new vision...
TRANSCRIPT
1 | P a g e
Vision Application Specification
Vision Application Specification
2 | P a g e
GENERAL INFORMATION
Description of your Requirements
Customer
Note: the feasibility will be based upon the requirements provided in this document. Please make sure they are as exact and complete as possible.
Name
m a Name
e e e N m ema
e ea e
3 | P a g e
Vision Application Specification
DESCRIPTION OF APPLICATION
2. Your Application is about
3. How many product types exist?
4. How many inspections occur on each part?
5. Does the machine already exist?
6. Communication and Communication protocols
7. About the Vision Application
Presence / Assembly
Other
Surface Inspection Color Inspection
Measurement Pick & Place
Yes No
Digital I/O RS232 Ethernet / TCP IP
Other
New Vision
Application
Upgrade for
Vision Application
OCR / OCV
You can also select more than one
1. Type of application
2D Vision 3D Vision Best Solution
e ea e
e e
e a e
e e
N m e e
ee
4 | P a g e
Vision Application Specification
SPECIFIC APPLICATION INFORMATION 8. Expected Precision from the Vision System
a) Measurement
b) Pick and Place
c) Defect Inspection
9. Inspection speed
Other
Accuracy required from Vision System (mm)
Other
Position Accuracy required from Vision System (mm)
Other
Smallest defect size (mm)
Please specify here the expected accuracy from the vision system.
If your precision type is not listed, please use the textbox below to describe.
Moving Stationary
Distance between parts (mm)
min max
Parts per Minute
Conveyor Belt Speed (mm)
5 | P a g e
Vision Application Specification
Height
Width
Length
PART PROPERTIES 1. Part size
2. Part cleanliness
3. Material
4. Appearance
5. Appearance of part: Is it always the same?
Oil / Smeary Dirty Clean
Other
Metal / Steel Plastic / Rubber Glass
Paper / Carton Other
Matt Shiny Transparent
Yes No Unknown
Length (mm)
min
Width (mm)
Height (mm)
max
Other
Colored
Which and how many colors do you have?
6 | P a g e
Vision Application Specification
ADDITIONAL PART INFORMATION
6. Images from the Part
7. Images from the environment
Add images here of the part and the environment by clicking on the image icon. Maximum four files. Supported filetypes: PDF, PNG, JPEG, BMP For further description, please use the textbox on the next page.
7 | P a g e
Vision Application Specification
Additional Notes for Part Properties
8 | P a g e
SETUP 1. Part positioning and Field of View
Size of inspection area
(Field of View - Yellow Rectangle)
Additional Notes for Setup
X± (mm)
Y± (mm)
Z± (mm)
Length (mm)
Width (mm)
min max
Please define the part movement in each direction using the fields below. Is the part in the same position and orientation every time? This information is important to define the size of the inspection area.
Angle± (degree)
Height (mm)
9 | P a g e
2. Distance between Camera and Part
3. Space available around the part
4. Room for Lighting
Additional Notes for Space available
Distance (mm)
min
Unknown
max
Cube Size (mm)
Height
Unknown
Length Width
On either side of the part
(Left and Right of part)
Below the part
(Backlight)
Above the part
(e.g. Dome Light) Unknown
No Limitations
Height
Width Length
10 | P a g e
ENVIRONMENT 1. Intensive vibrations at the machine?
2. Environment
3. Part transport
4. Shielding from Ambient Light
5. Possible Ambient Light Influence
Additional Notes for Environment
Yes No
Oil / Smeary Dirty High or Low
Temperatures
Clean Environment Other
Conveyor Belt Robot Manual
Other
Possible Not Possible Probably Possible
Unknown
Nothing Intense Sunbeams Additional Lighting
Other