volume 20 2017 catalogaskacom.com/uploads/catalog_pdf/catalog_volume_20_2017... · 2017-06-20 ·...
TRANSCRIPT
F-56 & F59 series
All brass type with 7/16”
Brass Nut
Volume 20
2017 Catalog
F-SPLICES
HARDLINE ½” CABLE ADAPTORS and FEMALE SPLICE
RG11 CONNECTOR
with separate ring
for RG-11/U coax
AF-11
RG11 CONNECTOR
with separate fixed pin for
RG-11 .460 O.D. cable
AF-11C
RG-11 FEED-THRU
CONNECTOR
All zinc die- cast with o-rings
CON-11
RG11 CONNECTORS and FEED THRU
FF-KS F-FEMALE to KS adaptor
All brass
TRM-1 KS PORT
TERMINATOR
AF-81CB 3GHz Brass Splice
35dB Return Loss
For 5-3GHz
27m/m long - Both Flat ends
AF-81S -
21mm LongNW
-71G
-1-
“Dish Network approved”
NW
Nut & Washer
½” Hex
100 set to bag
AF-81X 3 GHz Brass Splice
35dB Return loss
for 5 - 3000MHz
27mm long
both Flat ends
ALL BRASS
SPLICE
Economy typ
F, RCA, BNC, S-VIDEO ADAPTORS
AF59TPB
DC passing TERMINATOR
20dB return loss
for 5-2300MH
RCA-81
RCA Jack splice
RCA-F
RCA Jack to F-Male FF-R
F-Female to RCA Plug
BFM
BNC Female to
F-Male
BFA
F-Female to
BNC Male
BMR
BNC Male to RCA
Jack
AF-71
F-Male to F-male
Splice
PF-59
Push On Adaptor
F-Female to F-
Male push-on
TWIST-ON
CONNECTOR
FTO-56 - For RG-6
-2-
AF-90
Right Angle adaptor
F-screw on type
AF-90P
Right Angle adaptor
F-female to F-male
push-on
FAM-( * )
FIXED ATTENUATOR
5- 2300MHz
20dB return loss
SAT- ( * )
POWER PASSING
ATTENUATOR
5-2300 MHz
20dB return loss
VBC
VOLTAGE BLOCK
5-2300MHz
20dB return loss
AF59T1G TERMINATOR
25dB return loss for
5-2300MHz
ATTENUATORS AND VOLTAGE BLOCK 75 ohm TERMINATORS
AC/DC
BLOCKING
AC/DC
BLOCKING
Attenuation available for FAM & SAT.
- 3, 6, 8, 10, 12, 16 & 20dB
CRIMP-ON F-CONNECTORS
F-56D Seriesfor RG6
with Zinc Die-cast 7/16” Nut
F-56G seriesfor RG6
All Brass type with 7/16” Nut
Model No Descriptions Plating Tools Cable type
F59D Die cast 7/16” Nut Nickel AHX-596 & HXR596 RG59/U F56D Die cast 7/16” Nut Nickel AHX-596 & HXR596 RG6/U
F56G All brass with 7/16” Nut Gold Zinc -ditto- RG6/U
F56GW All brass with O-ring Gold Zinc -ditto- RG6/U
F56SG All brass with O-ring & silicon gel Gold Zinc -ditto- RG6/U
F56SW All brass, conical crimp type Nickel digicon RTC-360 RG6/U
-3-
F-56SW for RG6
All Brass
Conical Crimp type
with 7/16” nut
F59D seriesfor RG59
with Zinc Die-cast
7/16” Hex nut
COMPRESSION TOOLS
CTL-102
Economy and compact
compression tool
for most F-type compression
RG59, RG6 connectors in the
market
CTL-102U Universal Compact
compression tool
Supplied with adaptors to work
with most of compression
connectors in the market
CTL-104Pro Compression Tool
Versatile and Fully adjustable
Works for most F-type compression
connectors i.e. RG59, RG6,
RG6Quad, and RG11 compression
connectors
using One flip-over adaptor
adaptors
-4-
HI-PASS FILTER
RF A/B SWITCHES
MATCHING TRANSFORMERS Surge Protector
AB-4 PUSH BUTTON TYPE
A/B SWITCH 90 dB Isolation
Opened port terminated
PT-1INLINE SURGE PROTECTOR
Ideal for protection from lightening for TV, receivers, DVD player, computer, etc.
HPF-54High PASS FILTERPass 54-1000MHz Cut below 50MHz 40dB - rejection 22dB -Return Loss
EQ1G-( )1GHz EQUALIZER
Pass band: 50 - 1000MHz Equalizing value: 3, 6, 9, 12 & 16dB
-6-
MT75-3Matching Transformer with 3
capacitors Aluminum tubing for fully
shielded
5-1000MHz EQUALIZERS
5 – 1000MHz SPLITTERS – Power Passing series
1GHz DIGITAL SPLITTERS - (ONE PORT) POWER PASSING
1 GHz (ALL PORT) POWER PASSING SPLITTERS
SOLDER- BACK
COVERED
SOLDER BACK COVERED
SP-202-WAY SPLITTER
SP-30 3-WAY SPLITTER
SP-40 4-WAY SPLITTER
SP-808-WAY SPLITTER
ASU-2 2-WAY SPLITTER
ASU-3 3-WAY SPLITTER
ASU-4 4-WAY SPLITTER
SP-21GDC 2-WAY SPLITTER
SP-41GDC 4-WAY SPLITTER One port
Insertion loss - 4dB Max
Isolation - 35 dB Min
Return Loss - 25dB Min
Insertion Loss - 7dB Max
Isolation - 25dB Min
Return Loss - 20 dB Min.
Insertion Loss - 4 dB Max
Isolation - 25dB Min
Return Loss - 20 dB Min
Insertion Loss - 5.5 dB Max (equal loss)
Isolation - 20 dB Min
Return Loss - 18dB Min
Insertion Loss - 7dB Max
Isolation - 25dB Min
Return Loss - 18 dB Min
EPOXY BACK COVERED
-7-
1GHz DIGITAL CATV SPLITTERS 6KV, 5 - 1000 MHz
TGV-21G 2-WAY SPLITTER
TGV-31G 3-WAY SPLITTER
TGV-41G 4-WAY SPLITTER
TGV-81G8-WAY SPLITTER
SP-21G 2-WAY
SPLITTER
SP-31G3-WAY SPLITTER
SP-41G 4-WAY SPLITTER
SP-81G 8-WAY SPLITTER
Solder back Horizontal SP-21G SP-31G SP-41G SP-81G
Tongue/Groove Vertical TGV-21G TGV-31G TGV-41G TGV-81G
Frequencies ( MHz) All splitters - 5 - 42MHz return path and 54 - 1000MHz forward path
Insertion Loss (dB Max) 3.8 dB 6.0 dB 8 dB 12 dB
All splitters with equal loss at all ports
Isolation port-to-port (dB Min) 25dB 20dB 25dB 20dB
Return Loss (dB Min.) 25dB 23dB 25dB 19dB
Specifications:
-8-
1GHz VERTICAL PORT SPLITTERS – Non Power Passing
1 GHz SOLDER BACK SPLITTER – Non Power Passing type
“DISH APPROVED”
ASP-21 2-WAY SPLITTER
6KV Surge Protected
ASP-31 3-WAY SPLITTER
6KV Surge Protected
ASP-41 4-WAY SPLITTER
6KV Surge Protected
“NON POWER PASSING SPLITTERS”
DIRECTIONAL COUPLERS – 1GHz – Solder Back
SPECIALTY PASSIVE DEVICES
The SP-16G vertical port splitter features a printed circuit board to
provide outstanding performance. The 16-way splitters may be used
where cascading several splitters to meet the demands of MDU is
required. Coupled with ASKA 1GHz directional couplers, an operator
may run as many as 48 drops to a particular area.
No power passing circuit.
DCM1G-( )MINI DIRECTINAL
COUPLER
DCW1G-( )WALL MOUNT
DIRECTINAL COUPLER
UV-SJ
UHF/VHF COMBINER
VHF: 5 - 216MHz
UHF: 470 - 860MHz
Specifications:
Frequency Range: - 5 - 1000MHz
Insertion Loss: - 14dB Max
Isolation - 25dB Min.
Return Loss: - 16dB Min.
Dimensions: - 3-15/16”W x 9-5/8”L x 1-3/8”H
Specification: DCM1G & DCW1G
Tap Value (dB): 6, 9, 12, 16, 20, 24, 27, 30
Insertion Loss: 2.5dB Max for 6dB
1.5dB for 9 thru 20dB
.5dB for 24 thru 30dB
Isolation( Tap-Out): 23 dB Min
Return Loss: 20dB Min.
-9-
16-WAY 1GHz DIGITAL SPLITTER
UV-SS
UHF/VHF COMBINER
DC pass Line to UHF
VHF: 5 - 220 MHz
UHF: 280 - 890MHz
SP-16G 1 GHz 16 Way CATV splitter
2-WAY SPLITTERS
SP2G-2 - All port power passive
SP2G-2DC - One port power passive
SP2G-2DS - All port diode steered
Insertion Loss - 6dB Max
Port-Port Isolation - 20dB Min
Return Loss - 12dB Min
SATELLITE SPLITTERS
5 – 2300MHz WIDEBAND SATELLITE SPLITTERS
5 - 2300MHz SATELLITE SPLITTERS – soldered back
TV2G-8
-10-
General Specifications for All
2GHz Splitters
Return Loss - - - - - 12dB Min
Port-to-port Isolation - 20dB Min
Tongue & Groove heavy die-casting
housings for 130dB RFI
3-WAY SPLITTERS
SP2G-3 - All port power passive
SP2G-3DC - One port power passive
SP2G-3DS - All port diode steered
Insertion Loss: - 11dB Max
Port-Port isolation - 20dB Min.
Return Loss - 12 dB Min.
4-WAY SPLITTERS
SP2G-4 - All port power passive
SP2G-4DC - One port power passive
SP2G-4DS - All port diode steered
Insertion Loss: - 12 dB Max
Port-Port Isolation - 20dB Min.
Return Loss - 12 dB Min.
8-WAY SPLITTERS
All port power passive
-11-
Dish Pro Diplexer – 2 Amp/28VDC Current Capability
SCS-2A
Dish Network Approved
model for Dish Pro receiver
installation•Features:
•Low Insertion Loss, on both ANT and SAT ports
•Higher Return Loss – 12dB Min. on both ANT & SAT ports
•Solder back cover for excellent RFI shielding
•Complies with CEA-897 Port color coding
•Specifications:
Band width: ( ANT) 5 - 806MHz (SAT) 950 -
2200MHz Insertion Loss: ( ANT) - 2dB Max
(SAT) - 1.5dB Max Stop band Attenuation:
35dB Min DC
current capability: (SAT port only) – 2 Amp 28VDC
Return Loss: 12 dB Min. on both Sat and Ant
ports
SATELLITE DIPLEXERS
POWER INSERTERS
PS-1SINGLE POWER INSERTER
Specifications:
Band width: 5 - 2300MHz
Insertion Loss: 2.5dB Max
Return Loss: 15dB Min.
Input Power: 20VAC 60Hz
Output DC Voltage: 18VDC
Max Current: 300mA
Power transformer: UL listed
PI-10 POWER INSERTER
Frequency : 5 - 2300MHz
Insertion Loss : 0.5dB Max
Capacity: 60VDC 1 Amp
HPNA BANDPASS SPLITTERS & TAP 5-1500MHz
Specially designed to work in HPNA (Home Phoneline Network Allience)
environment over Existing Coax cables
Features:
•HPNA Compatible (Home Phone line Networking Alliance)
•Low Port-to-port Isolation (enable passing HPNA signal with low
loss) allows HPNA communication signals to pass through the
splitters to set top boxes with as small loss as possible
•Meets SCTE Environmental and Mechanical requirements –
Solder back cover
•Expanded Pass Band for future communication channels –
up to 1,500MHz
•Frequency Range: 5 to 42MHz Cable Modem, 54 to 1,500MHz
down stream Cable broadcast
Model No. HPN-2 HPN-3 HPN-4 HPN-6 HCT-3
Description: 2-way splitter 3-way splitter 4-way splitter 6-way splitter Coax Tap
Frequency Range: 4-1500 MHz 4-1500 MHz 4-1500 MHz 4-1500 MHz 4 - 1500 MHz
Insertion Loss (dB Max) 8 10 12 15 0.6dB - 4 - 27MHz
30dB - 30 - 1500MHz
Return Loss - Input (dB Min) 12 12 12 12 12
Return Loss - Output (dB Min) 12 12 12 12 12
Isolation OUT-OUT (dB Max) 8 10 12 15 15
HPN-2
2-WAY SPLITTER
4-1500MHz
HPN-3
3-WAY SPLITTER
4-1500MHz
HPN-4
4-WAY SPLITTER
4-1500MHz
HPN-6
6-WAY SPLITTER
4-1500MHz
Gateway
Telco NID
VDSL signal
TV
TV
TV
pc pc
Twisted pair 100 ohm
IPTV splitters
HPN-2 HPN-3
HPN-4 HPN-6
HPN-3
HPNA signal
Home Dwelling Unit
Installation example set-up
pc
STB
STB
Specifications:
Ethernet
HCT-3
HPNA COAX TAP
HCT-3
T
B
S
STB
IP-STB
PC - computer
TV - TV set
STB - Set top converter
IP-STB - IP set top box
HCT-3 - Coax Tap
HPN-3 - HPNA 3-way splitter
-12-
DISTRIBUTION AMPLIFIERS
CATV DROP AMPLIFIERS - 1GHz BROADBAND
AM-1UVUHF/VHF/FM HOME
AMPLIFIER
10dB GAIN
25dB GAIN U/V/FM AMPLIFIER
AM-125 - With FM trap
AM-125G - With Gain control & FM trap
-13-
AMP-20W
20 dB Gain 1GHz Amplifier
Plug- in Type directly into AC outlet
Features & Specifications
•Handheld Mini plug-In type - Simple to use
- one piece construction with built-in power supply
•Fuse built-in for AC powering
•1.5dB Low Noise figure
•5 - 1000 MHz for full 20 dB gain
with +/- 1dB flatness
•Return Loss (IN & OUT) - 10dB Min.
•Input/Output connectors – 75 Ohm F-type
• 35mm H x 74mm W x 48mm DIN OUT
Specifications:
Freq. Range: 950 - 2400MHz
Gain: 20 dB
Power requirement: 5 - 18VDC
can be used with XM radio
Power passive to connect directly
between LNB and Satellite receiver or
radio Output
LA-9520
Inline Amplifier
INLINE AMPLIFIER
DIGITAL RF MODULATORS
VHF RF MODULATOR CH-3 or 4 OUTPUT
“FCC Approved”
RFDM-1 DIGITAL UHF
MODULATOR
single input
Size: 2-3/4”x3-1/2 x1-1/8”
RFDM-3 DIGITAL UHF MODULATOR
TRIPLE INPUTS with ANT
input
The RFDM-1 & RFDM-3 modulates a video and left/right audio
signal of VCR, DVD, Satellite receiver, security camera, etc. to a
user selected TV channels.
RFDM-1 is a single channel input model.
RFDM-3 is a 3-channel input Mono modulator with ANT input.
They incorporates a commercial grade design intended for non-
adjacent placement of the modulated channels in any free channel
of UHF or CATV Ultra bands.
Specifications:
•Number of input -
RFDM-1 - 1
RFDM-3 - 3 with ANT input
•Output channels:
UHF: 14 - 74Ch. CATV Ultra: 65 - 135Ch.
•Input Level Video - 1V Min p-p for 87% modulation
•Output level - 25 dBmV
•Power supply: supplied
-14-
RFM-1G VHF
RF MODULATOR
•Features:
•VHF modulation for Audio and Video
•Allow the additional channels of VCR, DVD, Satellite receiver
to VHS Ch-3 or Ch-4 channels
•Switch-able channel selection
•RCA JACK for Audio/video inputs
•F-Female connector for RF output –
•Output – 30dBm
Note: Channel 95 thru
99 are not available
Front
Rear
DUAL PORT HIGH FREQUENCY GROUND BLOCKS
ECONOMY GROUND BLOCKS PREMIUM GROUND BLOCK
QUAD PORT GROUND BLOCK ANCHOR KIT
GB-1 GROUNDING BLOCK
with mounting screws
GB-2DDUAL GROUND
BLOCK
with 2 ground ports
and mounting screws
GB-1G PREMIER GROUND BLOCK
brass splice to meet SCTE specifications
Return Loss 28dB for 5 - 2300MHz
GB-1UL GROUND BLOCK
with circular contact insert
for 28dB Return loss up to
2.3GHz
GB-3ULDUAL GROUND BLOCK
with 2 ground ports & circular contact
insert for 28dB Return loss up to 2.3GHz
GB-7ULDUAL GROUND BLOCK
with 3 ground ports & circular insert for
28dB Return loss up to 2.3GHz
GB-5ULQUAD GROUND
BLOCK
with 4 ground ports for
more than 4 cable lines.
Ideal for Multi-sat
systems.
28dB return loss up to
2.3GHz
ANC-KITANCHOR KIT
Contains 100 each. of 10 x1
anchors and Hex head
screws.
one 3/16” masonry drill bit
supplied
ANC-2
¼” Double expansion
anchor lead Shield
100 to a bag
7/16” HEX HEAD
LAG BOLT with WASHER
LBW516-2 - 5/16” X 2”
LBW516-2.5 - 5/16” X 2.5”
LBW516-3 - 5/16” X 3”
-15-
GROUNDING BLOCKS
LAG BOLTS - ANCHOR & CONCRETE SCREWS
“ Dish network Approved” “Dish Network Approved”
“Dish Network”
Approved
Half Inch Hex Head
Lag Bolt with washer
” LBW12X2 - 5/16” X 2”
LBW12X3 - 5/16” X 3”
½” Hex head 7/16” hex head
BRASS
SPLICE
SATELLITE DISH INSTALLATION ACCESSORIES
COPPER GROUND STRAPS
A-24-6 - 6” strap
A-24-12 - 12” strap
A-21-4 4 Ft ground rod
with clamp copper plated
A-2
Q-SPAN CLAMP
galvanized steel bolt
and aluminum clamp
CADY-1
CABLE CADIES
to reel size up to
18” x 16” wide
sturdy steel
tubing
painted for
maximum
weather protection
-16-
.
GROUNG ROD CLAMP
A-3/8 - 3/8” Ground
Clamp A-5/8 -5/8” Ground Clamp
AMT-5
Dish Mounting
Fascia Plate
with hardwares
AMT-2
Dish Eave Mount
Makes attachment of DBS
antennas to eaves & Roof
overhangs fast.
U-CLAMP
U-bolt kit for DBS
mounts on outdoor
antenna Accepts
up to 1-3/4” mast
set of 2
ACA-32
3-Prong AC socket
to 2 prong Plug
adaptor
AMT-1S1-5/8” PIPE ADAPTOR
Supplied with extra nut
on bolts
Fits for most of DBS Pipe
UL LISTED GROUNDING PARTS
AGC-1UL
Water Pipe Clamp
Fits ½” – 1-3/8”
all zinc die-cast
AGC-2UL
Meter Pan Corner
bonding clamp
Gold zinc plated
AGC-3UL
Pole Grounding
Lug Wire diameter
#14 - #2 wires
all Aluminum
AGC-5UL
Dual Pole Grounding
Lug Wire diameter
#14 - #2 wires
all Aluminum
Used for copper to
copper bonding
connection
SB4U - #4 Wire
SB6U - #6 Wire
SB8U - #8 Wire
AGC-4UL
Bonding clamp for
Meter box front
All stainless steel
Galvanized
ground straps
GS6G-UL - 6”
GS9G-UL - 9”
GS12G-UL - 12”
Copper Ground Straps
GS6C-UL - 6”
GS9C-UL - 9”
GS12C-UL - 12”
GB3-UL Ground Block
Dual
with 2 ground
ports
30dB RL up to
3GHz
GB7-UL Ground Block
Dual
with 3 ground
ports
30dB RL up to
3GHz
GB5-UL Ground Block
Quad
with 4 ground
ports
30dB RL up to
3GHz
GSW-1
Green Ground
Screw
Self tapping
100 to bag
IBEAM-UL
I-Beam Ground
clamp
Teeth on bracket
penetrate paint
and rust for strong
ground connection
“Dish Network”
Approved
-17-
New
INSTALLATION PARTS & ACCESSORIES
CABLE TIES - Black
Tensil strength - 50Ib
CT-4 - 4 inch
CT-6 - 6 inch
CT-8 - 8 inch
CT-11 - 11 inch
CT-15 - 15 inch
WEATHER SEALS
U/V Resistant
WS-1 - ½ long
WS-14 - ¼” long
WS-38 - 3/8” long
CABLE CLIPS for Single Coax
CC-6 - ¾” nail for RG59 - 6mm dia
CC-7 - ¾” nail for RG6 coax - 7mm dia .
SCREW-IN CABLE CLIPS
Soft & flexible polyethylene
material UV resistance hold
coax cable securely
CX-1 - for RG6
CXG-1 - for Ground lead
CX-2 - for dual RG6 coax
RTV-3 SILICONE RUBBER
SEALANT Clear
3 Fl. Oz.
BOX-18.75”D X 6.25”W X 2.75”H
Polyethylene water resistant
utility box
ET-6060Ft.
Electrical
Tape
¾” X 60 Ft.
UL listed
FC-88” Flat cable
designed to install in exterior door
thresholds or in window sills
.
-18-
CABLE CLIPS for
Dual RG-6
CC-155 - ¾” nail
CC-155L - 1” long nail
All clips available in color, Black (B) or White (W), specify color
CC series uses “concrete nails” for block or masonry wall.
AWB-1
Rubber Boot
Fit RG-59/6 cable
over Connector
TELEPHONE
WIRE CLIP
CC-3.5 - Round Wire
CABLE NAIL IN CLIPS & SCREW CLIPS
TRI-3 – 1-1/4” mast
TRI-32 - 2 “ mast
TRIPOD
3Ft. Tripod Tower
•Heavy duty 1-1/4” tubing or 2” tubing
•Support masts up to 1-3/4” or 2 “ OD tube
included, specify tube diameter when ordering
•Pre-assembled with 3 ea. 15” nails, 6 each
5/16” bolts and 12 nuts
PITCH PATCH KIT
PPK-1 – 3 sealant pads with
3 lag bolts kit in one bag
PPK-2 - 3 sealant pads
only w/o lag bolts
SELF-SEALING TAPE
SEAL-60 - ½” X 60 Inch
SEAL-120 - 1.5” X 10 Ft.
SEAL-334 - 3-3/4” X 10 Ft.
Mountable
head
CT-8MH
CABLE TIES with
mountable Head
Black
8 Inch
New
TELEPHONE ACCESSORIES
MODULAR SURFACE
JACK
Converts 4-prong block to
modular jack. Supplied with
double back tape and screws
TMA-1 - Ivory
TMA-1W - White
DUAL SURFACE JACK
Converts hard wired block to
Dual Modular Jacks.
Supplied with double back
tape and screws
TMA-2 - Ivory
TMA-2W - White
MODULAR
T-ADAPTOR
Two in one modular
adaptor
TDA-2 - Ivory
TDA-2W - White
TMC-3 MODULAR
INLINE
COUPLER
4-Conductor,
Ivory only
TDA-3 TRIPLE JACK
ADAPTOR
3 to 1 Modular adaptor
convert single jack to
triple jacks
ivory only
TELEPHONE LINE CORDS
TLC-7 - 7 Ft
TLC-15 - 15 Ft.
TLC-25 - 25 Ft
-19-
TUY-2
2-Wire IDC
connector splices
AWG 22-26 wires
YELLOW
TUR-3
3-Wire IDC
connector Splices
AWG 22-26 wires
RED
IDC SPLICING CONNECTORS
Cable Testers
This cable tester is design to
check for continuity, miss-wiring,
open, short, straight-thru or cross-
spinning.
•Test for USOC, 8P8C, 6P6C,
4P4C
modular telephone or LAN cables
•Includes Master and Remote
•Handy Zippered carrying caseTCT-1
ADSL FILTER & FILTER/SEPARATOR
DSL-1 ADSL FILTER
•Filter only (no DSL output)
•Prevents ADSL signal from disturbing
phone or fax machine
•Reduces noise and enhances signal
quality
DSL
DSL-2 DSL
filter/splitter
Use product for satellite consumers who have DSL with satellite
receivers that have trouble dialing out or with noise
•Separate DSL Line to Phone/Voice signal and DSL Data signal
•Prevents ADSL signal from disturbing phone or fax machine
•Reduces noise and enhances signal quality
Line
Line
Out
Phone
TCT-2
Phone line tester can test polarity,and other phone
line conditions. Work with 4 or 6
position modular jacks
New
WALL PLATES & ACCESSORIES
ABP-1
BLANK WALLPLATE
with single 3/8” hole
White or Ivory
ABP-2
BLANK
WALLPLATE
with dual 3/8” holes
Available in White or Ivory color – specify color when ordering.
AWP-RJ
Single Modular
JackAWP-DRJ
Dual Modular Jack
SINGLE COAX PLATE
SWP-81 - 3GHz splice
DUAL COAX PLATE
SWP-81D - 3GHz splices
SWP-10 Satellite Ribbon cable wall plate
Ivory or white
WMB-1 Single Wall mount
Bracket
for low voltage wirings
WMB-2 Dual Wall mount
bracket
for low voltage wirings
WALL PLATE with AF81CB Premium SPLICES - 3GHz
-20-
CCS-7HL
WALL PLATE with Standard AF-81B SPLICES - 1 GHz
SINGLE COAX PLATE
AWP-81 - 1GHz splice
WALLPLATE with
one phone jack & splice
AWP-81RJ - 1GHz splice
WALLPLATE with one
phone jack & 2 splices
AWP-81DRJ - 1GHz splices
WALL MOUNT BRACKETS
Low voltage Mounting box
WMB-10 - Single gang
WMB-20 - Dual gang
RIBBON CABLE WALLPLATE
WALL PLATES
STRUCTURING WIRING PARTS & DEVICES
SNAP-IN INSERTS
KWP-1
1 port wall plate
KWP-2
2 port wall plate
KWP-4
4 port wall plateKWP-6
6 port wall plate
RCA Female coupler
KI-RCA-R - red
KI-RCA-G - Green
KI-RCA-B - Blue
KI-RCA-Y – Yellow
KI-RCA-W - White
F-female Splices
KI-F1 - 1GHz splice
KI-F2 - 3GHz splice
Binding post
KI-BP-B - Black
KI-BP-R - Red
KI-RJ11RJ11 6P4C Voice
grade snap-in jack
KI-RJ45CAT5e Keystone block
Snap-in Jack
-21-
RCA Jack to
F-female
KI-RCAF-R - Red
KI-RCAF-G - Green
KI-RCAF-B - Blue
KI-RCAF-Y - Yellow
KI-RCAF-W - White
KI-BLK Blank insert
White or Ivory
TMC-45
8C RJ45 Coupler
FTB-6
Feed Thru Bushing
for single RG-6
Black or white
FTBD-6
Feed Thru Busing
for Dual RG-6
Black or white
FTB-56X
FEED THRU BUSING
with knock-outs
for single RG-6
Black or White
KWP-3
3 port wall plate
SIDING CABLE CLIPS & FEED-THRU BUSHINGS
KWP-12
12 port wall plate
New
FTBD-56X
FEED THRU BUSING
with knock-outs
for Dual RG-6
Black or white
TMC-45S
8C RJ45 Coupler
Fully Shielded
CAT5e – PARTS - TOOL
-22-
RJ-45 MODULAR ADAPTORS
TMA-451
8C RJ45 Surface Jack
screw-on
economy type
TMA-452
8C RJ45 Surface Jack
keystone block type
TMA-45D
8C RJ45 Dual Surface Jack
keystone block type
TMC-45S
8C RJ45
Coupler
Fully Shielded
Note: All adaptors are available from color of Ivory or White. Specify W-for white and IV-for Ivory color when ordering
MODULAR PLUG, BOOTS AND CRIMPING TOOLS
MCT-3MODULAR RATCHET CRIMPING TOOL
Strip & Crimp for 4, 6 & 8 contact
modular plugs
Can crimp both handset and line plugs
MODULAR PLUGS
TMP-4F 4-contact Line plug RJ-11
TMP-8F8-contact Line plug, RJ-45
TMP-8S
Fully shileded 8-cond.
plug
DIAGNOSTIC MEASURING TOOLS
DIGITAL MULTI-METER
Specifications:
•DC Voltage: 200mV - 1000mV
•AC Voltage: 20V – 750v
•DC Current: 20mA – 20Amp
•AC Current: 200mA – 20Amp
•Resistance: 200 Ohm – 20Mohm
•Diode Test: Yes
•Continuity Buzzer: Yes
•Cable test: RJ11, RJ12, RJ45, USB
•Power supply: 9V 6F22 type
•Max display: 1999
•Display size: 30 x 75mm
•Weight: 320gram
•Size: 3.5”W x 7.5”L x 1.5”H
The ASKA hand-held digital multi-meters are pocket sized and measures DCV, ACV, DC Amp, Resistance and diodes.
Includes 9V battery test proves and holster. Model No. CMT-2D is able to test Cable continuity of RJ-11, RJ45 and USB.
How CMT-2D is used
for cable continuity test
of
RJ-11 or CAT-5/E jacks
Aska Model CTR-8 CABLE MAPPERS are designed to find and identify multiple twin leads and
coax cables in system. Hand-held device is ideal for CATV, Satellite, speaker and security
system installers. It is able to test multi-run cable system terminated with F-connectors or those
who wish to map runs to central bundle. The numbered terminators are tuned to light up their
matching green LEDs on the mapper panel to identify test cable.
•Features:
•Test for open and short - continuity beeper up to 8
cables
•Bright Red and Green LED display test result
•Auto Power off: 12 seconds after pass/fail result
•Change to Tone mode in 30 Min.
•Maximum cable length for measuring – 3000Ft.
•Battery - 2 pcs 3 V CR2302 - Life 40 hours in
continuous use
CTR-8
CABLE MAPPER
with
8 terminators
Remote unit
The CRT-12 cable tester is designed TO Tone cables
allowing quick identification. Allow users to helps
troubleshoot cable problems by indicating open or short
circuits. Tones out the circuit and has a LED
indicator shows good or bad connections. It comes with
12 V battery and F-female splice.
CRT-12 Coaxial
Cable
Tester
-24-
CMT-2D
DELUXE
MULTI METER
with built-in
CABLE TESTER
Removable
unit for cable
testing
SATELLITE SIGNAL METERS & ALIGNMENT TOOLS
SF-9522
SF-9522PORTABLE SATELLITE FINDER
with Audio tone function and
22KHz pulse LED indicator
•950 – 2300MHz bandwidth
•Pocket size and light weight
•High sensitive illuminated meter
•Audio tone function
•22KHz TONE INDICATOR light up when receiving 22khZ tone
signal
•Comes with F-jumper cable
AF-701M SATELLITE ANGLE FINDER
Use to check vertical alignment
of antenna mast to ensure
level plane
suggest to use with COMPASS
• Magnetic base for easy to use
•4” diameter light weight
•Blister packed
-25-
AF-701M
LEVEL-3
TEMPLATE LEVEL
Specially designed to help you precisely mark
openings for ASKA Model # WMB-10 or WMB-20
single or Dual gang low vaoltage mounting boxes.
It features both vertical and horizontal leveling
vials enabling the use to square up the opening in
either position.
LEVEL-3
New
MULTI-SWITCHES
-26-
RACK MOUNT 5X12 SATELLITE smatv MULTI-SWITCHES
The AMS-512R is designed for 12 satellite receiver systems on 19” Rack.
They are especially designed to use with Satellite system using 22KHz pulse
tone control for multiple satellite system such as all of DirecTV Phase one,
Integrated 4x4 switch, Y-type switch and/or Phase III 18” x 20” multiple
satellite system. The switch comes with PS-11 power supply.
Specifications:
Pass band Frequency: 40 - 2300MHz
Insertion Loss: -7dB Max.
Control Voltage:
LNB A - 18V/0KHz
LNB B - 13V/0KHz
LNB C - 18V/22KHz
LNB D - 13V/22KHz
LNB current draw: - 250mA Max
Power adaptor provided: PS-11 120VAC, 24VDC, 600mA
Dimensions: 18” x 2” x 4.8”
Weight: 4 pound
AMS-512R5x12 Rack mounted Switch
Page: 1
Specification :
O-fiber Pre-embedded type fast connector is easy assembling at site. The internal
core part, V groove is high precise, big strength, good coherence and durable, the
internal pre-embedded O-fiber created a new technology of the O-fiber double
end polishing. It reduces reliance of operator’s O-fiber cutting quality, and also
increases the life time of the product greatly. After the product ended, the
connection parameters reach to the patch cord standard both in mechanics and
optics, offer a strong support for FTTH
FA
ST
C
ON
NE
CT
OR
O-fiber Pre-embedded type fast connector
Fiber Diameter 125μm ( 652 & 657 )
Coating Diameter 250μm
Mode SM
Operation Time about 15s(exclude fiber presetting)
Insertion Loss ≤ 0.25dB(1310nm & 1550nm)
Return Loss ≤ -45dB
Success Rate >98%
Reusable Times >10 times
Tensile Strength >5 N
Tighten Strength of Coating >10 N
Temperature -40~+85°C
On-line Tensile Strength Test (20 N) IL ≤ 0.3dB
Mechanical Durability(500 times) IL ≤ 0.3dB
Drop Test(4m concrete floor, once each
direction, three times total)IL ≤ 0.3dB
ASK-ESC-250D
ASK-ESC-250D-APC
Linkage structure, environment test good
Tail is cover type with cable holder, easy to
install
ASK-MESC-250P
ASK-MESC-250P-APC
Alloy V groove, high optical performance
Tail is cover type, easy to install
L×W×H:56×9×7mm
FIBER
-27-
Page: 2
FA
ST
C
ON
NE
CT
OR
ASK-YT-250E
ASK-YT-250E-APC
Linkage structure, environment test good
Tail is screw type, high tensile stress
ASK-MESC-250P-L
Adopt tail screw type clamping device
Please use the dedicated O-fiber stripper/length
setting guideway
ASK-SCUPC-01
ASK-SCAPC-01
Components material is plastic, competitive cost
Tail is screw type, high tensile stress
ASK-SCUPC-02
ASK-SCAPC-02
Components material is plastic, competitive cost
Tail is screw type, high tensile stress
ASK-EFC-250P
Adopt tail screw type clamping device
Please use the dedicated O-fiber stripper/length
setting guideway
Applied to the drop cable and indoor 2.0/3.0 cable
L: 56MM
ASK-MESC-250P-LW
Adopt tail screw type clamping device
Please use the dedicated O-fiber stripper/length
setting guideway
L×W×H:56×9×7mm
O-fiber Pre-embedded type fast connector
-28-
Page: 3
Dire
ct-th
ro
ug
h C
ON
NE
CT
OR
ASK-MRSC-250P-L
O-fiber Directly through type fast connector
Applicable for 3.1 x 2.0 mm dropcable,3mm,2mm cable
Optical fiber diameter 125μm ( 652 & 657 )
Tight buffer diameter 250μm
Applicable mode single
Operation time about 15s (without fiber cut)
Insert loss ≤ 0.3dB(1310nm & 1550nm)
Return loss ≤ -40dB
Success rate >98%
Reusability times >10times
Fastening strength of naked fiber >5 N
Clamping force of fiber with tight buffer >8 N
Using temperature -40~+85°C
On-line tensile strength) IL ≤ 0.3dB
Mechanical durability (500 times) IL ≤ 0.3dB
Drop off test ( 4 meters high, cement floor, three
directions)IL ≤ 0.3dB
ASK-MRSC-250P-LW ASK-RSC-250P-LW
ASK-RSC-250PASK-MSC-250P ASK-RSC-250D
-29-
Page: 4
Sp
lic
e-o
n C
ON
NE
CT
OR
SC Splice- on Connector
Application 3.0 x 2.0 mm butterfly drop cable
Cladding Diameter 125μm ( 657A & 657B )
Coating Diameter 250μm
Insertion Loss ≤ 0.3dB(1310nm & 1550nm)
Reflection Loss > 50dB
Rate of success >95%
Clamping Force >5 N
Tension >20 N
Temperature Range -40~+75°C
Tension Test when installed (20 N) IL ≤ 0.2dB RL ≤ 5dB
Mechanical Endurance (500 times) IL ≤ 0.2dB RL ≤ 5dB
Fall-down Test (4 meters height, 3 time each direction) IL ≤ 0.2dB RL ≤ 5dB
Model No.: ASK-HMSC250P Model No.: ASK-HMSC250P-APC
-30
Page: 5
Me
ch
an
ic
al S
plic
eFiber Optic Mechanical Splice
Model No.:ASK-L925B
Applicable for φ0.25 mm &φ0.90 mm fiber
Size 45*4.2*4.7mm
Optical fiber diameter 125μm ( 652 & 657 )
Tight buffer diameter 250μm & 900μm
Applicable mode single & multimode
Operation time about 10s (without fiber cut)
Insert loss ≤ 0. 25 dB(1310nm & 1550nm)
Return loss ≤ -45dB
Fastening strength of naked fiber >5 N
Clamping force of fiber with tight buffer >8 N
Using temperature -40~+75°C
Reusability (10 times) IL ≤ 0.2dB RL ≤ 5dB
Applicable for 3.1 x 2.0 mm dropcable
Optical fiber diameter 125μm ( 657A & 657B )
Tight buffer diameter 250μm & 900μm
Applicable mode single & multimode
Operation time about 30s (without fiber cut)
Insert loss ≤ 0.25dB(1310nm & 1550nm)
Return loss ≤ -45dB
Success rate >98%
Reusability times >10times
Fastening strength of naked fiber >5 N
Clamping force of fiber with tight buffer >8 N
Tensile strength >50 N
Using temperature -40~+75°C
On-line tensile strength) IL ≤ 0.2dB
Mechanical durability (500 times) IL ≤ 0.2dB
Drop off test ( 4 meters high, cement floor, three directions) IL ≤ 0.2dB
Model No.: ASK-L925BP
Model No.:ASK-L925BPH
Suitable for 2.0*3.0 and 3.0mm cable
-31-
Fiber end face melt and Connector
Page: 6
Fib
er e
nd
fa
ce
m
elt a
nd
C
on
ne
cto
r
Model No.:ASK-FEM100
the equipment is applicable for field-mountable optical connector,
It realizes the end face cutting and electric arc treatment into
integrated operation, which makes fiber end face turn to sphere.
Also achieves fiber core physics contact during connecting,
improves fiber return loss without matching liquid, then avoids
connecting problem from matching liquid pollution.
Suitable for single and multimode fiber
Typical image estimate time <3s
IL <0.2dB
RL>50dB
INPUT: 100-240V 50 / 60Hz,OUTPUT: 12V DC
Battery Spec: 12V lithium battery, Maximum current 4A,
Volume 4000mAh
before
after
Fiber End face Melter type connector(ODF CO)
The length is only 45 mm, totally satisfy the free distribution of fiber optic connector in tray,
module and unit of ODF.
YT920RD-SC
YT900RD-SC
YT920RD-FC
YT250RD
-32-
Page: 7
MP
O C
ab
le
/c
on
ne
cto
r
The products are the highest cost-effective in the present market.
we invite all distributors and customers sincerely.
Number of cores 12
MPO Connector SM Ferrule MM Ferrule
Insertion Loss(dB) Typical ≤0.35 ≤0.30
max ≤0.75 ≤0.60
Return Loss (dB) ≥50 for APC ≥20 for PC
≥35 for PC /
Male/Female Male: With Pins; Female: Without Pins
Exchange ability (dB) ≤ 0.3
Temp. Range ≤0.2(-40℃~+80 ℃)
Fiber hole
numberMaterial Fiber Hole Diameter Insertion Loss Application
12 PPS
0.126 +0.002/-0 mm ≤0.6dB MM Standard
0.126 +0.001/-0 mm ≤0.35dBMM Premium
Low Loss
No. Item Applicable
1 Connector Form MPO Connector
2 Connector TypeM:Male(with guide pin);
F:Female(without guide pin);
3 Ferrule codeM: MM Standard
MP: MM Premiun Low Loss
4 Number of Fiber Holes 12
5 Housing Color
B: Black(MM 50/125)
A: Aqua(MM 50/125 OM3 grade)
Be: Beige(MM 62.5/125)
V: Violet(MM 50/125 OM4 grade)
6 Boot Type1: Flat Jacketed Ribbon Cable
2:φ3mm Round Cbale
MPO CONNECTOR MPO –MTP ADPTORMPO ADAPTOR
MPO Connector for Flat Jacketed Ribbon Cable
-33-
Page: 8
Op
tic
al A
DA
PT
OR
DescriptionOptico Optical fiber SC adapter has a plastic housing and either a precision zirconia or
a rugged phosphor bronze sleeve. Zirconia sleeve enables stable connection and thus
enhances performance, and is ideal for single mode applications. Flange-mount type simplex
and duplex adapters are available.
FeaturesCompliance with Bellcore 326 and TIA/EIA 604 Standard
High Precision
Easy Installation
Low insertion loss
Good exchangeability and repeatability
Zirconia or phosphor-bronze sleeve
ApplicationTelecommunication
Computer networks
CATV networks
Active device termination
FTTx
Characteristics Unit Single ModeInsertion Loss (IL) dB ≦0.2
Exchangeability dB IL≦0.2
Repeatability (500 mates) Db IL≦0.2
Sleeve material - Zirconia
Housing material - Plastic
Operating Temperature °C ﹣40 ~ +70
Storage Temperature °C ﹣40 ~ +70Other type adaptor
SC APC/APC SC UPC/UPC
SC DUAL APC/APC SC DUAL UPC/UPC
ST/PC
FC/APC
FC PC-SC/PC FC PC-SC/APC
FC/PC FC/APC
SC/PC & SC/APC ADAPTOR
-34-
Op
tic
al A
tten
uato
r
1. Fixed AttenuatorApplications:High Return Loss
Stable and reliable
Low insertion loss error
Full stable environmental performance
Compact structure, easy to operate
Feature:
Telecom network/ Optical fiber CATV/ LAN/ Optical fiber sensor/FTTH
2. Adjusted Attenuator
ITEM FEMALE/MALE TYPE FLANG TYPE
TYPE FC/SC/ST/LC/MU FC/SC/ST
Operating wavelength (nm) 1310/1550nm
Attenuation Value (dB) 5/10/15/20 any selection 3/5/10/15/20
Attenuation Error +/-0.5dB
Return Loss PC>40dB, UPC>50dB, APC>60dB
Operating Temperature ﹣40 ~ +85°C
ASK-ZY-047 ASK-ZY-048
ASK-SC/APC-AT
ASK-SC/PC-AT
ASK-LC/APC-AT
ASK-LC/UPC-AT
ASK-FC/APC-AT
ASK-FC/UPC-AT
ASK-SC/APC-ATA ASK-SC/UPC-ATA ASK-ATA ( select the connector)
Optical Attenuator
-35-
Fib
er O
ptic
P
atch
C
ord
Fiber optic patch cord is available in both single mode and multimode versions.
Both single mode and multimode versions fiber optic patch cord come with a zirconia
ceramic ferrule with pre-polished PC,UPC,APC profile and convex spherical end.
These end face types allow for faster polishing, and low back reflection and optical loss,
while ensuring maximum repeatability
Features:
1.Low insertion loss and back reflection loss
2.Ferrule end surface pre-domed
3.Excellent mechanical endurance
4.Good in repeatability
5.Good in exchange
6.Green Production, CE, RoHS Standard
Application:
1.Telecommunications
2.CATV, LAN, MAN, WAN, Test &Measurement
3.Military industry
4.Medical
Mode Single mode Multimode
Polish UPC APC PC
Insertion Loss ≤0.3dB ≤0.3dB ≤0.3dB
Return Loss ≥50dB ≥60dB ≥35dB
Test Wavelength 1310/1550nm 850/1310nm
Durability(500 Matings) ≤0.2dB
Operating Temperature -20℃~+70℃
Storage Temperature -40℃~+85℃
Fire Resistant IEC 60794-2-30
Standards-Compliant ROHS,IEC and GR-326
Fiber Optic Patch Cord
-36-
Fiber cable performance specifications
Fiber type Min.Bandwidth Distance Attenuation
62.5/125850/1300nm
200/500 MHz/Km@100Mbps 2km @1Gig 220m
850/1300nm
3.0/1.0dB/km
50/125850/1300nm
500/500 MHz/Km@100Mbps 2km @1Gig 500m
850/1300nm
3.0/1.0dB/km
50/125
10Gig Optimized
850/1300nm
2000/500 MHz/Km
@100Gig Varies by VCSEL typical 30
0m 2850nm
850/1300nm
3.0/1.0dB/km
9/1251310/1550nm
Approx 100 TerahertzUp to 100km Varies by transceiver
1310/1550nm
0.4/0.3dB/km
Fiber type
Single mode:
(1)9/125-G652D
(2)9/125-G655
(3)9/125-G657A,,G657A2
Multimode:
(4)50/125-OM2
(5)62.5/125-OM1
(6)50/125-OM3
Fiber YOFC
Connector1 FC,LC,SC,ST
Polishing UPC,APC
Connector2 FC,LC,SC,ST
Polishing UPC,APC
Cord type Simplex ,Duplex
Cable diameter 0.9mm ,2.0mm, 3.0mm
Cable jacket PVC,LSZH
length(M) 0.3m,1m,2m,5m,10m,25m,50m,100m
Model: ASK-APC/APC-PC
SC/APC- SC/APC Patch Cable
Model: ASK-APC/UPC-PC
SC/APC- SC/UPC Patch Cable
Model: ASK-UPC/UPC-PC
SC/UPC- SC/UPC Patch Cable
Fib
er O
ptic
P
atch
C
ord
Fiber Optic Patch Cord
-37-
PLC
O
ptic
al S
plitte
r
PLC Optical Splitter
Planar Lightwave Circuit Splitter (PLC Splitters) is a product based on planar waveguide
optical power distribution technology which is capable with low insertion loss and
polarization dependent loss, compact size, wide operating wavelength range, high channel
uniformity and good characteristics, this product has been mass deployed for building up
the optical network especially for passive optical network (PON).
All PLC products comply with Telcordia GR-1209-CORE, Telcordia GR-1221-CORE,
YD/T1117-2001 and RoHs standards.
APPLICATION FTTx Construction
Passive Optical Network (PON)
Cable TV Network (CATV)
FEATURE
Excellent performance of low I.L. and PDL
Good spectral uniformity
Wide wavelength bandwidth
Compact Size
STANDARD COMPLIANCE
Telcordia GR-1209-CORE
Telcordia GR-1221-CORE
YD/T1117-2001
Specification:
Description Unit 1x2 1x4 1x8 1x16 1x32 1x64
Operating Wavelength nm 1260-1650
Insertion LossTypical
dB
3.6 7 10.2 13.3 16.5 20
Max.
(P/S)3.8/4.0 7.2/7.4 10.5/10.7 13.5/13.9 16.5/17.2 20/21.5
PDL dB ≤ 0.2 ≤ 0.2 ≤ 0.2 ≤ 0.3 ≤ 0.3 ≤ 0.3
Loss Uniformity dB ≤ 0.6 ≤ 0.8 ≤ 1.0 ≤ 1.4 ≤ 1.6 ≤ 1.9
Return Loss dB ≥ 55 ≥ 55 ≥ 55 ≥ 55 ≥ 55 ≥ 55
Wavelength Dependent Loss dB ≤ 0.5 ≤ 0.5 ≤ 0.5 ≤ 0.5 ≤ 0.5 ≤ 0.5
Fiber Type Corning SMF-28e or customer specified
Temperature Stability (-40 to +85°C) dB ≤ 0.5
Operation Temperature °C -40 to +85
Max Optical input power mW 300Description Unit 2x2 2x4 2x8 2x16 2x32 2x64
Operating Wavelength nm 1260-1650
Insertion Loss (P/S) dB 3.9/4.2 7.3/7.6 10.5/11 14/14.8 17.4/17.9 21/21.5
PDL dB ≤ 0.2 ≤ 0.2 ≤ 0.2 ≤ 0.3 ≤ 0.3 ≤ 0.3
Loss Uniformity dB ≤ 0.6 ≤ 0.8 ≤ 1.0 ≤ 1.4 ≤ 1.6 ≤ 1.9
Return Loss dB ≥ 55 ≥ 55 ≥ 55 ≥ 55 ≥ 55 ≥ 55
Wavelength Dependent Loss dB ≤ 0.5 ≤ 0.5 ≤ 0.5 ≤ 0.5 ≤ 0.5 ≤ 0.5
Fiber Type Corning SMF-28e or customer specified
Temperature Stability (-40 to +85°C) dB ≤ 0.5
Operation Temperature °C -40 to +85
Max Optical input power mW 300
PLC Optical Splitter
-38-
PLC
O
ptic
al S
plitte
rPLC Splitter, Blockless, Raw Fiber/Ribbon
Item 1x2 1x4 1x8 1x16 1x32 1x64 2x2 2x4 2x8 2x16 2x32
LxWxH
(MM)40x4x4 50x7x4 55x7x4 60x12x4 55x4x4 65x7x4
PLC Splitter, Blockless, Tubing/Connectors
Item 1x2 1x4 1x8 1x16 1x32 2x2 2x4 2x8 2x16 2x32
LxWxH (MM) 60x7x4 60x12x4 80x20x6 60x7x4 80x12x4 1000x20x6
PLC Splitter, ABS Box, Fiber Cable/Termination
Item1x2
2x2
1x4
2x4
1x8
2x8
1x16
2x161x32 1x64 2x32
LxWxH (MM) 1000x80x10 120x80x18120x80x18
140x114x18140x114x18
120x80x18
140x114x18
-39-
PLC
O
ptic
al S
plitte
r
Note: Please refer to below buffer color coding chart
Buffer Color Coding Chart
PLC Splitter, LGX Module
Number Color
1 9 17 25 blue
2 10 18 26 orange
3 11 19 27 green
4 12 20 28 brown
5 13 21 29 slate
6 14 22 30 white
7 15 23 31 red
8 16 24 32 black
Item LxWxH (mm)1x2
2x2
1x4
2x4
1x8
2x8
1x16
2x16
1x32
2x32
1x64
2x64
ABS BOX 130x100x25 v v
ABS BOX 130x100x50 v
19” Rack Mount 483x280x44.5 v v v v
PLC Splitter, ABS Box/Rack Mount, Adaptor
Item 1x2 1x4 1x8
LxWxH (MM) 130x100x25 130x100x50
PLC Optical Splitter
-40-
FT
TH
O
ptic
al re
ce
ive
r w
ith
R
F O
ut
ASK-ZY-001
Operating wavelength 1260-1620nmASK-ZY-002
With automatic gain control functionASK-ZY-003
With manual gain control function
Products with high sensitivity optical receiver tube and low noise matching circuit.
Whether used in analog television or digital television, have high reception sensitivity
And excellent intermodulation distortion index.
ASK-ZY-004
Operating wavelength 1260-1620nmASK-ZY-005
With automatic gain control functionASK-ZY-006
With manual gain control function
ASK-ZY-007
Built-in CWDM,CATV operating
Wavelength 1550nm.
Pass wavelength 1310/1490
ASK-ZY-008
Built-in CWDM,CATV operating
Wavelength 1550nm.
Pass wavelength 1310/1490
ASK-ZY-009
Operating wavelength 1260-1620nmASK-ZY-009
With AGC function
Power supply:
1. European type also available
2. F port also available
FTTH OPTICAL RECEIVER WITH RF OUT
-41-
Product DescriptionCATV converter used for digital television, fiber to home. It adopts the high sensitivity
optical receiving tube, without power supply, no power consumption. When the input
Optical power output level Pin=-1dBm, Vo=68dBuV, can be economically and flexibly
Apply the integration of three networks, fiber to the home network application. Appearance
Of enamel, there are two kinds of optical model selection:
1.CATV operating wavelength 1260-1620nm
2. built-in 1310/1490nm filter, suitable for single-fiber triple wavelength system, CATV
Operating wavelength 1550nm
Product featureNo power required
Work bandwidth 45-1050MHz
Output level=68dBuV (Pin=-1dBm)
Main applicationCATV FTTH
Integration of three networks
FTTH PON
Product featureExtra-low noise (3.8% modulate, -10dBm receive, CNR>45dB)Wide dynamic receiving optical power range: within Pin=-15, MER>36.8dB
Applicable GPON, EPON, compatible with any FTT x PON technology
In the range of 45-1000MHz, all have good flatness (FL<+/-0.75dB)
Metal shell, supply safeguards to opto-electrical sensing devise
Low consumption, high performance, high reliability
Status IndicationGreen: >10dBm
Orange: <-10dBm
Note: Users can set the order request
FT
TH
C
AT
V O
/E
C
ON
VE
RT
ER
FTTH CATV O/E CONVERTER
ASK-ZY-010 (SC-F) ASK-ZY-011 (FC-F)
Responsivity A/W >0.9
Input Optical Power dBm -10 -- +3
Optical Return Loss dB >45
Input Wavelength Nm1260-1620
1550+/-20 built-in 1310/1490nm filter
Output Wavelength Nm 1310/1490 built-in CWDM
Optical Fiber Type Single Model
RF PARAMETERFrequency Range MHz 47-1000
Flatness dB +/-0.75
output level dBuV >82
CNR (-2dB input power) dB >53.6
CSO dB >62
CTB dB >65
Return Loss dB >16
Output impedanceOHM
S75
Power supply VDC 12
Power Consumption w <2
-42-
ApplicationsUniversal waterproof connector, reliable performance
Airproof and water proof, high tensile strength, antei-corrosion
Apply to the proof field environment.
Flexible connector is convenient for fixing
Various types of optical connectors available
Low insertion loss and high return loss
Waterp
ro
of P
ig
ta
il
Waterproof Pigtail
ASK-ZY-032
MODEL INSERTION LOSS(dB) RETURN LOSS(dB)PC 0.1 45
UPC 0.1 50APC 0.2 65
-43-
ASKA COMMUNICATION CORP.
3000 SW 15TH STREET
SUITE E
DEERFIELD BEACH, FL. 33442, U.S.A.
www.askacom.com
Toll Free: 800-317-6625 Phone: 954-708-2387 Fax: 754-333-8706
Volume 20 - 2017 Catalog