voluntary action plan alignment work in 2019

___________________________________________________________________________

2019/SOM3/SCSC/006 Agenda Item: 5.2.1

Voluntary Action Plan Alignment Work in 2019

Purpose: Information Submitted by: Japan

Second Sub-Committee on Standards and Conformance Meeting 2019

Puerto Varas, Chile21-22 August 2019

Ministry of Economy, Trade and Industry (METI)

APEC 2019 SCSC221 – 22 August 2019, Puerto Varas, ChileMinistry of Economy, Trade and Industry

JAPAN

Voluntary Action Plan (VAP) Alignment Work in 2019

- Agenda Item 5.2.1 -


2

Overview

1. Introduction2. 7th VAP: List of Standards3. 7th VAP: Degree of Alignment4. Summary5. Future Plans6. Work Plan for 8th VAP


3

Introduction

1. Conduct survey of member economies to select thetarget ISs for the VAP study.

2. Collect information from each member economy on thedegree of alignment between the selected ISs and thecorresponding NSs.

3. Review the degree of alignment after several years tocheck the progress of the alignment works of eacheconomy.

To encourage member economies to align their nationalstandards (NSs) with international standards (ISs) by sharinginformation on the degree of alignment with each other.

Objectives of the Voluntary Action Plan (VAP)

Method


4

7th VAP: List of Target Standards (1)Category Target Standard Title

1 CASCO ISO/IEC 17000 Conformity assessment -- Vocabulary and general principles 2 CASCO ISO/IEC 17011 Conformity assessment -- General requirements for accreditation bodies accrediting conformity assessment bodies3 CASCO ISO/IEC 17020 Conformity assessment -- Requirements for the operation of various types of bodies performing inspection

4 CASCO ISO/IEC 17021-1 Conformity assessment -- Requirements for bodies providing audit and certification of management systems -- Part 1: Requirements

5 CASCO ISO/IEC TS 17021-9 Conformity assessment - Requirements for bodies providing audit and certification of management systems - Part 9: Competence requirements for auditing and certification of anti-bribery management systems

6 CASCO ISO/IEC 17024 Conformity assessment -- General requirements for bodies operating certification of persons 7 CASCO ISO/IEC 17025 General requirements for the competence of testing and calibration laboratories 8 CASCO ISO/IEC 17043 Conformity assessment -- General requirements for proficiency testing 9 CASCO ISO/IEC 17050-1 Conformity assessment -- Supplier's declaration of conformity -- Part 1: General requirements

10 CASCO ISO/IEC 17050-2 Conformity assessment -- Supplier's declaration of conformity -- Part 2: Supporting documentation 11 CASCO ISO/IEC 17065 Conformity assessment -- Requirements for bodies certifying products, processes and services

12 EMC CISPR 11 Industrial, scientific and medical equipment - Radio-frequency disturbance characteristics - Limits and methods of measurement

13 EMC CISPR 14-1 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 1: Emission

14 EMC CISPR 14-2 Electromagnetic compatibility - Requirements for household appliances, electric tools and similar apparatus - Part 2: Immunity - Product family standard

15 EMC CISPR 15 Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment16 EMC CISPR 17 Methods of measurement of the suppression characteristics of passive EMC filtering devices

17 EMC CISPR 22 Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (Withdrawn - replaced by CISPR 32:2015)

18 EMC CISPR 24 Amendment 1 CISPR 24 Information technology equipment - Immunity characteristics - Limits and methods of measurement

19 EMC CISPR 25 Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers

20 EMC CISPR 32 Electromagnetic compatibility of multimedia equipment - Emission requirements21 EMC IEC TR 61000-4-1 Electromagnetic compatibility (EMC) - Part 4-1: Testing and measurement techniques - Overview of IEC 61000-4 series22 EMC IEC 61000-4-5 Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test

23 EMC IEC 61000-6-5 Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment

24 EMC IEC 61000-4-6 Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields


5


25 Electric Devices IEC 60076-1 Power transformers - Part 1: General26 Electric Devices IEC 60076-2 Power transformers - Part 2: Temperature rise for liquid-immersed transformers27 Electric Devices IEC 60076-5 Power transformers - Part 5: Ability to withstand short circuit28 Electric Devices IEC 60076-8 Power transformers - Part 8: Application guide29 Electric Devices IEC 60076-10 Power transformers - Part 10: Determination of sound levels30 Electric Devices IEC 60076-11 Power transformers - Part 11: Dry- type transformers31 Electric Devices IEC 60228 Conductors of insulated cables32 Lighting IEC 62504 General lighting - Light emitting diode (LED) products and related equipment - Terms and definitions33 Lighting IEC 60064 Tungsten filament lamps for domestic and similar general lighting purposes - Performance requirements 34 Lighting IEC 60081 Double-capped fluorescent lamps - Performance specifications

35 Lighting IEC 60432-1 Incandescent lamps - Safety specifications - Part 1: Tungsten filament lamps for domestic and similar general lighting purposes

36 Lighting IEC 60901 Single-capped fluorescent lamps - Performance specifications 37 Lighting IEC 60968 Self-ballasted lamps for general lighting services - Safety requirements 38 Lighting IEC 60969 Self-ballasted lamps for general lighting services - Performance requirements 39 Lighting IEC 62031 LED modules for general lighting - Safety specifications40 Lighting IEC 62717 LED modules for general lighting - Performance requirements41 Lighting IEC 62776 Double-capped LED lamps designed to retrofit linear fluorescent lamps - Safety specifications42 Lighting IEC 60838-1 Miscellaneous lampholders - Part 1: General requirements and tests 43 Lighting IEC 60929 AC-supplied electronic ballasts for tubular fluorescent lamps - Performance requirements

44 Lighting IEC 61048 Auxiliaries for lamps - Capacitors for use in tubular fluorescent and other discharge lamp circuits - General and safety requirements

45 Lighting IEC 61049 Capacitors for use in tubular fluorescent and other discharge lamp circuits. Performance requirements46 Lighting IEC 60598-1 Luminaires - Part 1: General requirements and tests 47 Lighting IEC 60598-2-22 Luminaires - Part 2-22 : Particular requirements - Luminaires for emergency lighting 48 Lighting IEC 62722-1 Luminaire performance - Part 1: General requirements49 Lighting IEC 62722-2-1 Luminarie performance. Part 2-1: Particular Requirements for LED luminaries50 Lighting IEC 62471 Photobiological safety of lamps and lamp systems51 PV modules IEC 61730-1 Photovoltaic (PV) module safety qualification - Part 1 : Requirements for construction52 PV modules IEC 61730-2 Photovoltaic (PV) module safety qualification - Part 2 : Requirements for testing 53 PV modules IEC 62109-1 Safety of power converters for use in photovoltaic (PV) power systems - Part 1 : General requirements

54 PV modules IEC 62109-2 Safety of power converters for use in photovoltaic (PV) power systems - Part 2 : Particular requirements for inverters


6


55 Electric Vehicle IEC 61851-1 Electric vehicle conductive charging system - Part1: General requirements

56 Electric Vehicle IEC 61851-21-1 Electric vehicle conductive charging system - Part 21-1 Electric vehicle on-board charger EMC requirements for conductive connection to AC/DC supply

57 Electric Vehicle IEC 61851-21-2 Electric vehicle conductive charging system - Part 21-2: Electric vehicle requirements for conductive connection to an AC/DC supply - EMC requirements for off board electric vehicle charging systems

58 Electric Vehicle IEC 61851-23 Electric vehicle conductive charging system - Part 23: DC electric vehicle charging station

59 Electric Vehicle IEC 61851-24 Electric vehicle conductive charging system - Part 24: Digital communication between a d.c. EV charging station and an electric vehicle for control of d.c. charging

60 Electric Vehicle IEC 62196-1 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 1: General requirements

61 Electric Vehicle IEC 62196-2 Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 2: Dimensional compatibility and interchangeability requirements for a.c. pin and contact-tube accessories

62 Electric Vehicle IEC 62196-3Plugs, socket-outlets, vehicle connectors and vehicle inlets - Conductive charging of electric vehicles - Part 3: Dimensional compatibility and interchangeability requirements for d.c. and a.c./d.c. pin and contact-tube vehicle couplers

63 Batteries IEC 60086-2 Primary batteries - Part 2: Physical and electrical specifications64 Batteries IEC 60086-3 Primary batteries - part 3: Watch batteries65 Batteries IEC 60086-4 Pimary batteries - part 4: Safety of lithium batteries66 Electrical Appliances IEC 60456 Clothes washing machines for household use - Methods for measuring the performance67 Electrical Appliances IEC 60335-1 Household and similar electrical appliances - Safety - Part 1: General requirements 68 Electrical Appliances IEC 60335-2-29:2016 Household and similar electrical appliances - Safety - Part 2-29: Particular requirements for battery chargers

69 Electrical Appliances IEC 60335-2-45 Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances

70 Electrical Appliances IEC 60335-2-49 Household and similar electrical appliances - Safety - Part 2-49: Particular requirements for commercial electric appliances for keeping food and crockery warm

71 Electrical Appliances IEC 60335-2-54 Household and similar electrical appliances - Safety - Part 2-54: Particular requirements for surface-cleaning appliances for household use employing liquids or steam

72 Electrical Appliances IEC 60335-2-59 Household and similar electrical appliances - Safety - Part 2-59: Particular requirements for insect killers

73 Electrical Appliances IEC 60335-2-61 Household and similar electrical appliances - Safety - Part 2-61: Particular requirements for thermal storage room heaters

74 Electrical Appliances IEC 60335-2-81 Household and similar electrical appliances - Safety - Part 2-81: Particular requirements for foot warmers and heating mats

75 Electrical Appliances IEC 60335-2-84 Household and similar electrical appliances - Safety - Part 2-84: Particular requirements for toilet appliances76 Electrical Appliances IEC 60601-1 Medical electrical equipment - Part 1: General requirements for basic safety and essential performance

77 Electrical Appliances IEC 60601-1-2 Medical electrical equipment - Part 1.2: General requirements for basic safety and essential performance --Collateral standard: Electromagnetic compatibility -- Requirements and tests

78 Electrical Appliances IEC 60950-1 Information technology equipment - Safety - Part 1: General requirements


7


79 Textiles ISO 105-E04 Textiles - Tests for colour fastness - Part E04: Colour fastness to perspiration80 Textiles ISO 3758 Textiles - Care labelling code using symbols

81 Rubber Products ISO 34-1 Rubber, vulcanized or thermoplastic - Determination of tear strength - Part 1: Trouser, angle and crescent test pieces

82 Rubber Products ISO 10282 Single-use sterile rubber surgical gloves -- Specification

83 Rubber Products ISO 11193-1 Single-use medical examination gloves -- Part 1: Specification for gloves made from rubber latex or rubber solution

84 Rubber Products ISO 11193-2 Single-use medical examination gloves -- Part 2: Specification for gloves made from poly(vinyl chloride)85 Rubber Products ISO 4074 Natural rubber latex male condoms -- Requirements and test methods86 Management Systems, etc ISO 22000 Food safety management systems - Requirements for any organisation in the food chain

87 Management Systems, etc ISO TS 22003 Food safety management systems - Requeriments for bodies providing audit and certification of food management systems

88 Management Systems, etc ISO 9000 Quality management systems -- Fundamentals and vocabulary89 Management Systems, etc ISO 9001 Quality management systems -- Requirements90 Management Systems, etc ISO 14001 Environmental management systems - Requirements with guidance for use

91 Management Systems, etc ISO 14066 Greenhouse gases - Competence requirements for greenhouse gas validation teams and verification teams

92 Management Systems, etc ISO 13485 Medical devices - Quality management systems - Requirements for regulatory purposes

93 Management Systems, etc ISO 15223-1 Medical devices - Symbols to be used with medical device labels, labelling and information to be supplied - Part 1: General requirements

94 Management Systems, etc ISO 21500 Guidance on project management95 Management Systems, etc ISO 31000 Risk Management - Principles and guidelines96 Management Systems, etc ISO 22301 Societal security - Business continuity management systems - Requirements97 Management Systems, etc ISO 37001 Anti-bribery management systems - Requirements with guidance for use

98 Management Systems, etc ISO/IEC 27001 Information technology -- Security techniques -- Information security management systems --Requirements

99 Management Systems, etc ISO/IEC 27032 Information technology - Security techniques - Guidelines for cybersecurity

Total: 99 standards


8

7th VAP: Degree of Alignment

Thank you for your cooperation!

Survey on the degree of alignment was conducted from April to July 2019.Results from 13 economies were submitted.

Malaysia (MAS)New Zealand (NZ)Peru (PE)Singapore (SGP)Chinese Taipei (CT)Thailand (THA )

Australia (AUS)Canada (CDA)Chile (CHL)China (PRC)Hong Kong, China (HKC)Indonesia (INA)Japan (JPN)


9


• Hong Kong: There is no central standards body developing and issuing domestic standards. Hong Kong’s policy is to use International Standards as far as possible. Some regulations refer to International Standards directly. State of IS described instead of NS

• Indonesia and Peru: Some NS are mandatory, but only for certain institutions. Categorized as “Mandatory in some cases”

• Japan: Some NS are referred by “Interpretation of Ministerial Order to Provide Technical Standards for Electrical Appliances and Materials“, which is not a TR but a reference material issued by METI. Categorized as “Not sure”

• All: There were notes from some economies on TRs referring to older versions of NS. The referred version of the NS not considered in this presentation.

IDT (Same edition or newer)IDT (Older edition)

MOD (Same edition or newer)MOD (Older edition)

NEQNo NS

Degree of alignment between NS and IS as of 1st Jan 2019

Is the NS referred by any Technical Regulations (TR)?

Notes:

MandatoryMandatory in some casesVoluntaryNo answer

Is the NS itself voluntary or mandatory?

Referred by TRNot sureNot referred by TRNo answer


10




NEQ



Category AUS CDA CHL PRC HKC INA JPN MAS NZ PE SGP CT THA

1ConformityAssessment

ISO/IEC 17000:2004 Ed 1 〇 □ 〇 □ 〇 - 〇 □ ◎ ■ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO/IEC 17011:2017 Ed 2 〇 □ 〇 □ 〇 - 〇 □ ◎ ■ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO/IEC 17020:2012 Ed 2 〇 □ 〇 □ 〇 - 〇 □ ◎ ■ 〇 □ 〇 □ ● ■ 〇 □ 〇 □ 〇 □ 〇 ■


ISO/IEC 17021-1:2015 Ed 1 〇 □ 〇 □ 〇 - 〇 □ ◎ ■ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO/IEC TS 17021-9:2016

Ed 1 〇 □ 〇 □ ◎ ■ 〇 □


ISO/IEC 17024:2012 Ed 2 〇 □ 〇 □ 〇 - 〇 □ ◎ ■ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO/IEC 17025:2017 Ed 3 〇 ■ 〇 □ 〇 - 〇 □ ◎ ■ 〇 ■ 〇 □ 〇 □ 〇 □ 〇 □ 〇 ■ 〇 ■


ISO/IEC 17043:2010 Ed 1 〇 □ 〇 □ ◎ ■ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO/IEC 17050-1:2004 Ed 1 〇 □ 〇 □ 〇 - - - ◎ ■ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO/IEC 17050-2:2004 Ed 1 〇 □ 〇 □ 〇 - - - ◎ ■ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO/IEC 17065:2012 Ed 1 〇 □ 〇 □ 〇 □ ◎ ■ 〇 ■ 〇 □ ● ■ 〇 □ 〇 □ 〇 □ 〇 ■

Reference InternationalStandard (IS)


11




NEQ




12 EMCCISPR 11:2015

+AMD1:2016 CSVEd 6.1 〇 ■ 〇 □ ● - ● ■ 〇 - 〇 □ 〇 □ 〇 ■ 〇 ■

13 EMC CISPR 14-1:2016 Ed 6.0 〇 □ ● - - - 〇 - 〇 □ 〇 □ 〇 ■ 〇 ■ 〇 □

14 EMC CISPR 14-2:2015 Ed 2.0 〇 □ 〇 - - - 〇 - 〇 □ 〇 □ 〇 □

15 EMC CISPR 15:2018 Ed 9.0 〇 □ 〇 - - - 〇 - 〇 □ 〇 □ 〇 ■ 〇 ■ ● ■

16 EMC CISPR 17:2011 Ed 2.0 〇 - - - 〇 - 〇 □ 〇 □ 〇 □

17 EMC CISPR 22:2008 Ed 6.0 〇 □ 〇 □ 〇 - - - 〇 - 〇 □ 〇 ■ 〇 ■ 〇 ■ 〇 □

18 EMCCISPR 24:2010

+AMD1:2015 CSVEd 2.1 〇 □ 〇 - - - 〇 - 〇 □ 〇 □ 〇 □ 〇 □ 〇 □

19 EMC CISPR 25:2016 Ed 4.0 〇 ■ 〇 - - - 〇 - 〇 □ 〇 □ 〇 □ 〇 □ 〇 □

20 EMC CISPR 32:2015 Ed 2.0 〇 □ 〇 □ - - 〇 - 〇 □ 〇 ■ 〇 □ 〇 □

21 EMCIEC TR 61000-4-

1:2016Ed 1.0 〇 □ 〇 □ 〇 - - - 〇 □ 〇 □ 〇 □

22 EMCIEC 61000-4-5:2014+AMD1:2017 CSV

Ed 3.1 〇 □ 〇 □ 〇 - - - 〇 - 〇 □ 〇 □ 〇 □ 〇 ■ 〇 □

23 EMC IEC 61000-6-5:2015 Ed 1.0 〇 □ 〇 □ 〇 - - - 〇 □

24 EMC IEC 61000-4-6:2013 Ed 4.0 〇 □ 〇 □ 〇 - - - 〇 - 〇 □ 〇 □ 〇 □ 〇 □ 〇 □



12




NEQ




25ElectricDevices

IEC 60076-1:2011 Ed 3.0 〇 ■ 〇 - - - 〇 - 〇 ■ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □

26ElectricDevices

IEC 60076-2:2011 Ed 3.0 〇 □ 〇 - - - 〇 - 〇 ■ 〇 □ 〇 □ 〇 □

27ElectricDevices

IEC 60076-5:2006 Ed 3.0 〇 ■ 〇 - - - 〇 - 〇 ■ 〇 □ 〇 □ 〇 □

28ElectricDevices

IEC 60076-8:1997 Ed 1.0 〇 ■ 〇 - - - 〇 - 〇 □

29ElectricDevices

IEC 60076-10:2016 Ed 2.0 〇 ■ 〇 - - - 〇 - 〇 □ 〇 □ 〇 □

30ElectricDevices

IEC 60076-11:2018 Ed 2.0 〇 ■ 〇 - - - 〇 - 〇 □ 〇 □ 〇 □

31ElectricDevices

IEC 60228:2004 Ed 3.0 〇 △ 〇 - - - 〇 - 〇 □ ● ■ 〇 □

32 LightingIEC 62504:2014

+AMD1:2018 CSVEd 1.1 〇 - - - 〇 □ 〇 □ 〇 □


+AMD1,2,3Ed 6.3 〇 △ 〇 - - - ● - 〇 ■ 〇 ■ ● ■ 〇 □


+AMD1:2000 CSVEd 5.1 〇 ■ 〇 □ 〇 - - - 〇 - 〇 ■ 〇 ■ ● ■ ● ■ 〇 ■ 〇 □

35 LightingIEC 60432-1:1999

+AMD1,2Ed 2.2 〇 □ 〇 □ - - 〇 - 〇 △ ● ■ ● □


+AMD1,2Ed 2.2 〇 ■ 〇 □ 〇 - - - 〇 - 〇 ■ 〇 ■ 〇 ● ■ 〇 □



13




NEQ




37 Lighting IEC 60968:2015 Ed 3.0 〇 ■ ● - - - ● - 〇 △ 〇 ■ ● ■ 〇 □ 〇 □ ● □

38 Lighting IEC 60969:2016 Ed 2.0 〇 □ 〇 □ - - ● - 〇 ■ 〇 ■ 〇 □ 〇 □ 〇 □ 〇 □

39 Lighting IEC 62031:2018 Ed 2.0 〇 □ ● - - - 〇 - 〇 ■ 〇 ■ 〇 □ 〇 □


+AMD1:2015 CSVEd 1.1 〇 - - - 〇 - 〇 □ 〇 □ 〇 □ 〇 □

41 Lighting IEC 62776:2014 Ed 1.0 - - 〇 □ 〇 □ 〇 □

42 LightingIEC 60838-1:2016+AMD1:2017 CSV

Ed 5.1 - - 〇 - 〇 △ 〇 ■ 〇 □ 〇 □


+AMD1:2015 CSVEd 4.1 〇 ■ 〇 - - - 〇 - 〇 □ 〇 ■ 〇 □ 〇 □ 〇 ■ 〇 □


+AMD1:2015 CSVEd 2.1 〇 □ 〇 - - - 〇 - 〇 ■ 〇 ■ 〇 □ 〇 □ 〇 □

45 Lighting IEC 61049:1991 Ed 1.0 〇 □ - - 〇 ■ 〇 ■ 〇 □ 〇 □

46 LightingIEC 60598-1:2014+AMD1:2017 CSV

Ed 8.1 〇 ■ 〇 □ ● ■ ● - - - ● - 〇 ■ 〇 ■ 〇 □ ● ■ 〇 □ 〇 ■ 〇 □

47 LightingIEC 60598-2-22:2014

+AMD1:2017 CSVEd 4.1 〇 ■ ● - - - 〇 - 〇 △ 〇 □ ● ■ 〇 □ 〇 □ 〇 □

48 Lighting IEC 62722-1:2014 Ed 1.0 〇 - - - 〇 □ 〇 □ 〇 □ 〇 □ 〇 □

49 Lighting IEC 62722-2-1:2014 Ed 1.0 〇 - - - 〇 □ 〇 □ 〇 □ 〇 □ 〇 □

50 Lighting IEC 62471:2006 Ed 1.0 〇 ■ 〇 □ - - 〇 □ 〇 □ 〇 □ 〇 □ 〇 □



14




NEQ




51 PV modules IEC 61730-1:2016 Ed 2.0 〇 □ 〇 - - - 〇 - 〇 □ 〇 □ 〇 □ 〇 □ 〇 □

52 PV modules IEC 61730-2 :2016 Ed 2.0 〇 □ - - 〇 - 〇 □ 〇 □ 〇 □ 〇 ■ 〇 □

53 PV modules IEC 62109-1:2010 Ed 1.0 〇 □ - - 〇 □ 〇 □ 〇 ■ 〇 □

54 PV modules IEC 62109-2:2011 Ed 1.0 〇 □ - - 〇 □ 〇 ■ 〇 □

55ElectricVehicle

IEC 61851-1:2017 Ed 3.0 - - 〇 □ 〇 □ 〇 □

56ElectricVehicle

IEC 61851-21-1:2017 Ed 1.0 - - 〇 □ 〇 □

57ElectricVehicle

IEC 61851-21-2:2018 Ed 1.0 - - 〇 □ 〇 □

58ElectricVehicle

IEC 61851-23:2014 Ed 1.0 〇 □ - - 〇 □ 〇 □ 〇 □

59ElectricVehicle

IEC 61851-24:2014 Ed 1.0 〇 □ - - 〇 □ 〇 □ 〇 □

60ElectricVehicle

IEC 62196-1:2014 Ed 3.0 - - 〇 - 〇 □ 〇 □ 〇 □

61ElectricVehicle

IEC 62196-2:2016 Ed 2.0 〇 □ - - 〇 - 〇 □ 〇 □ 〇 □

62ElectricVehicle

IEC 62196-3:2014 Ed 1.0 - - 〇 - 〇 □ 〇 □ 〇 □



15




NEQ




63 Batteries IEC 60086-2:2015 Ed 13.0 〇 △ 〇 - - - ● - 〇 ■ 〇 □ 〇 □ 〇 □

64 Batteries IEC 60086-3:2016 Ed 4.0 〇 - - - 〇 - 〇 □ 〇 □ 〇 □

65 Batteries IEC 60086-4:2014 Ed 4.0 ● - - - 〇 - 〇 □ ● ■ 〇 □

66Electrical

AppliancesIEC 60456:2010 Ed 5.0 〇 △ - - 〇 - 〇 □ ● ■ 〇 □ 〇 □ 〇 □

67Electrical

AppliancesIEC 60335-1:2010

+AMD1,2Ed 5.2 〇 ■ 〇 □ 〇 △ ● - - - ● - 〇 ■ ● ■ ● ■ 〇 □ 〇 ■ 〇 □

68Electrical

AppliancesIEC 60335-2-29:2016 Ed 5.0 〇 □ 〇 □ ● - - - 〇 - 〇 △ ● ■ 〇 □ 〇 □ 〇 ■ 〇 □

69Electrical

AppliancesIEC 60335-2-45:2002

+AMD1,2Ed 3.2 〇 □ 〇 □ ● - - - 〇 - 〇 △ ● ■ 〇 □ 〇 □ 〇 □

70Electrical


+AMD1,2Ed 4.2 〇 □ ● - - - 〇 △ 〇 □

71Electrical


+AMD1:2015 CSVEd 4.1 〇 □ - - 〇 △ 〇 □ 〇 □

72Electrical


+AMD1,2Ed 3.2 〇 □ 〇 □ ● - - - 〇 △ ● ■ 〇 □ 〇 ■ 〇 □

73Electrical


+AMD1,2Ed 2.2 〇 □ 〇 □ ● - - - 〇 △ 〇 □ 〇 □ 〇 ■

74Electrical


+AMD1:2017 CSVEd 3.1 〇 □ ● - - - 〇 △ 〇 □ 〇 □ 〇 □ 〇 ■

75Electrical


+AMD1,2Ed 2.2 〇 □ ● - - - 〇 △ 〇 □ 〇 □ 〇 □ 〇 ■



16




NEQ




76Electrical

AppliancesIEC 60601-1:2005+AMD1:2012 CSV

Ed 3.1 〇 □ 〇 □ 〇 □ ● - - - 〇 - 〇 ■ 〇 □ 〇 □ 〇 □

77Electrical

AppliancesIEC 60601-1-2:2014 Ed 4.0 〇 □ 〇 □ - - 〇 - 〇 □ 〇 □ 〇 □

78Electrical

AppliancesIEC 60950-1:2005

+AMD1,2Ed 2.2 〇 ■ 〇 □ ● - - - 〇 - 〇 ■ ● ■ 〇 □ 〇 □ 〇 ■ 〇 □

79 Textiles ISO 105-E04:2013 Ed 6 〇 □ 〇 □ 〇 - - - 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □

80 Textiles ISO 3758:2012 Ed 3 〇 □ 〇 - - - 〇 □ 〇 ■ 〇 □ 〇 □ 〇 □

81Rubber

ProductsISO 34-1:2015 Ed 4 〇 □ 〇 - - - 〇 □ 〇 □ 〇 □ 〇 □

82Rubber

ProductsISO 10282:2014 Ed 3 〇 □ ● - - - 〇 ■ 〇 □ 〇 □ 〇 □ 〇 □

83Rubber

ProductsISO 11193-1:2008 Ed 2 〇 □ - - 〇 □ 〇 □ 〇 □ 〇 □ 〇 □

84Rubber

ProductsISO 11193-2:2006 Ed 1 〇 □ - - 〇 □ 〇 □

85Rubber

ProductsISO 4074:2015 Ed 3 〇 □ 〇 □ 〇 - - - 〇 ■ 〇 □ 〇 ■ 〇 □

86ManagementSystems, etc.

ISO 22000:2018 Ed 2 〇 □ 〇 □ 〇 - 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO TS 22003:2013 Ed 2 〇 □ 〇 □ 〇 □ 〇 □ 〇 □



17




NEQ





ISO 9000:2015 Ed 4 〇 ■ 〇 □ 〇 □ 〇 - 〇 □ 〇 □ 〇 ■ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO 9001:2015 Ed 5 〇 ■ 〇 □ 〇 □ 〇 - 〇 □ 〇 □ 〇 ■ 〇 □ ● ■ 〇 □ 〇 □ 〇 □ 〇 □


ISO 14001:2015 Ed 3 〇 ■ 〇 ■ 〇 □ 〇 - 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO 14066:2011 Ed 1 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO 13485:2016 Ed 3 〇 ■ ● ■ 〇 □ - - 〇 ■ ● ■ 〇 □ 〇 □ 〇 □ 〇 □


ISO 15223-1:2016 Ed 3 ● ■ - - 〇 □ 〇 □


ISO 21500:2012 Ed 1 〇 □ 〇 □ - - 〇 □ 〇 □ 〇 □


ISO 31000:2018 Ed 2 〇 ■ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 ■ 〇 □ 〇 □ 〇 □ 〇 □


ISO 22301:2012 Ed 1 〇 □ 〇 □ 〇 - 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO 37001:2016 Ed 1 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □ 〇 □


ISO/IEC 27001:2013 Ed 2 〇 ■ - - 〇 □ 〇 - 〇 □ 〇 - 〇 ■ 〇 □ ● ■ ◎ ■ 〇 □ 〇 ■ 〇 □


ISO/IEC 27032:2012 Ed 1 〇 □ 〇 □ 〇 - 〇 □



18

Summary

• Alignment of 99 IS was investigated with participation of 12 economies.• The ratio of IS adopted as NS was high in conformity assessment, low in EV.• The ratio of NS which are IDT was high in conformity assessment, EMC, PV modules

and management systems, low in electric devices and textiles and rubber.• The ratio of NS adopting updated IS was high in conformity assessment and

management systems, low in EMC and batteries.• The ratio of NS which are mandatory or referred by TR was high in lighting and

electrical appliances.

Results of 7th VAP No. of IS investigated

NSratio

IDTratio

Updated ratio

NEQratio

Mandatory or referred by TR

Conformity Assessment 11 73% 92% 94% 0% 19%EMC 13 57% 81% 38% 1% 18%Electric Devices 7 49% 53% 64% 0% 20%Lighting 19 55% 65% 48% 8% 35%PV modules 4 46% 83% 54% 0% 13%Electric Vehicle 8 27% 61% 79% 0% 0%Batteries 3 44% 65% 41% 0% 24%Electrical Appliances 13 59% 64% 60% 1% 30%Textiles and rubber 7 49% 47% 47% 4% 11%Management Systems, etc. 14 59% 95% 85% 0% 18%


19

Future Plans

Future plans for 7th VAP• Excel version of the summarized data and raw data including NS

document numbers and notes will be shared between economies whichhave submitted the survey.

• Alignment status of each target standard of the 7th VAP will be reviewedin 2022, in order to check the progress of the alignment works of eacheconomy. The final results of the 7th VAP will be reported at SCSC2, 2022.

Future plans for 8th VAP and beyond• A new set of target standards will be selected each year so as to conduct

timely study. (and the number of target standards will be reduced for thelesser workload)


20

Future Plans

2019 2020 2021 2022 2023 2024 2025 2026

7th VAP

8th VAP

9th VAP

10th VAP

11th VAP

First & Second Survey: selection of the sets of target standardsReport at SCSC1Third Survey: study the status of alignmentReport at SCSC2Fourth Survey (Review): compare with the results of the third survey


21

Work Plan for 8th VAP

Time frame Work Plan for 8th VAP

September 2019 First survey: Member economies will be requested to propose sets of new target standards for the 8th VAP

November 2019 Second survey: Member economies will be requested to vote for each set of candidates of new target standards

February 2020 The selected sets of new target standards will be reported and the third survey will be announced at SCSC1

April-June 2020 Third survey: Member economies will be requested to report on the alignment status of each target standard

August 2020 Results of the third survey will be reported at SCSC2

April-June 2023

Fourth survey: Alignment status of each target standard will be investigated again. The progress of the alignment work will be confirmed by comparing with the results of the third survey

August 2023 Final results of the 8th VAP will be reported at SCSC2


22

Thank you for your attention.We are looking forward to your cooperation!

Kentaro [email protected]

voluntary action plan alignment work in 2019

Documents