volvo construction equipment forestry solutions tracked...
TRANSCRIPT
volvo ConstruCtion EquipmEnt
ForEstry solutions
traCkEd ForEstry CarriErs
�
ForEstry solutionsHarvEsting/proCEssing
Forestry excellence. new cornerstone.
Since 19�7 the worldwide Volvo standard of value has been built around a cornerstone of excellence. As a result, Volvo Construction Equipment has remained a global leader in innovation, quality, productivity, safety, fuel efficiency and environmental care. Now, new higher standards of value and excellence have been set with the introduction of the Volvo FC family of purpose-built, tracked forestry carriers. These new forestry carriers are designed and built to the same exacting standards that Volvo customers around the globe have come to expect and rely on.
rugged. At Volvo It Is
More than Just a word.
Working in the forest is demanding
work. Nowhere is this more evident than
in the applications of harvesting and
processing. Steep slopes, mud, snow,
frigid winter darkness, searing summer
heat, rocky mountainous terrain and
heavy lifting are standard operating
conditions. To be productive in any
combination of these conditions, shift
after shift, you need a forestry carrier that
is safe, strong and, most of all, rugged.
Volvo’s latest tracked forestry carriers
start with a purpose–built undercarriage
and lower frame, reinforced track motor
covers and idlers, dual mounted bottom
rollers on top and full-length track rock
guards providing unequaled protection
from almost anything that a forest work
environment can toss at it.
tough Fuel efficient Power.
Each model of these rugged, heavy-duty,
tracked forestry carriers is powered by
a new generation Volvo, turbo-charged,
EPA Tier III-compliant diesel engine
with Advanced Combustion Technology
(V-ACT). This muscle is then perfectly
balanced to a state-of-the-art, dedicated
hydraulic system with electronically
controlled pump. The result: exceptional
performance at lower revs, smooth
and precise lifting power and stability,
faster cycle times and ultra-efficient
fuel consumption. Translation? More
production. For less. Tough is good —
but tough, powerful, stable and
extremely fuel-efficient is even better.
Volvo. every Part A Perfect Fit.
Every Volvo owner appreciates the ease
of parts availability from a respected
global dealer network, lower operating
costs and, over one hundred components
and consumable parts common to other
Volvo machines they may own. This is just
another way that Volvo says value.
Optional gull-wing design for added protection and convenience.
Consult your Volvo dealer for the availability of OEM custom cabs.
FC2121C is ideal for thinning and smaller wood.
FC2121C FC2421C FC2924C FC3329C
Weight (less attaChment) 24.5 t / 54,010 lb. 27.9 t / 61,510 lb. 34.6 t / 76,280 lb. 37.8 t / 83,330 lb.
maximum Rated kw (hP) 123 kw / 165 hp 123 kw / 165 hp 138 kw / 185 hp 153 kw / 205 hp
maximum engine toRque 735 nm / 542 ft. lb. 735 nm / 542 ft. lb. 870 nm / 642 ft. lb. 965 nm / 712 ft. lb.
maximum tRaCtive eFFoRt 183 kn / 41,140 lb. 209 kn / 46,985 lb. 230 kn / 51,706 lb. 258 kn / 58,001 lb.
�
ForEstry solutionsload/sort/staCk/sHovEl
the GAMe oF PIck-uP-stIcks Is hArd. GAMe on.
The new Volvo FC family of heavy-duty, purpose-built tracked forestry carriers with their heavy-duty forestry guarded, standard equipment boom and arm offer the ultimate combination of capacity and reach. In turn, each carrier delivers unique solutions for log loading, sorting, stacking, or shovel logging applications.
Volvo’s advanced hydraulic system, with in-cab operator-selectable hydraulic flow and pressure provides the variable lifting power and swing torque you need without burning extra fuel. Further protection of the hydraulic system is provided by the reinforced guarding of many hydraulic lines and cylinders. Add the grapple of your choice and the game is on.
Play safe.
At Volvo, we understand that the
machine operator’s safety and comfort
is job one. With the newly designed
spacious Volvo Forestry Care Cabs
with integrated heavy-duty, falling object
guard (FOG), cab risers and tough
polycarbonate windows with guarding,
operators have an unequalled level of
visibility and protection. Every Volvo
forestry cab is fully compliant with global
safety standards as defined by OSHA,
WCB, SAE and ISO. Fully adjustable
climate control keeps everything
comfortable on those hot, steamy
summer days, and the heated operator
seat makes starting work on frigid winter
mornings more bearable.
Invest smartly.
When you choose from the new Volvo
FC family of tracked forestry carriers
that is right for your log harvesting
operation, you have made a very smart
investment. An investment that will pay
dividends shift after shift for years to
come. So take a stand. Select a Volvo.
It’s a smart, quality investment.
Put one to work on your forestry
related job site.
Top guarding and additional fuel capacity options available.
Consult your dealer for the availability of OEM custom logging fronts.
Volvo Forestry Care Cab with globally approved guarding.
�
ForEstry solutionsroad Building/stumping/silviCulturE
When it comes to the forestry applications of road building, stump harvesting or silviculture, the power, durability and versatility of the new Volvo FC family of heavy-duty, tracked forestry carriers is second to none. Superior boom and arm construction, powerful V-ACT engines and smooth hydraulics assure that you will never be stumped on the job site.
Volvo Quality and Innovation.
The unique, gull-wing rear body cover available on the
FC���1C model is another optional Volvo innovation
designed to save you time and money. With its steel frame
construction and heavy-duty metal panels, all inside engine,
electrical and hydraulic components, including the fuel tank,
muffler and exhaust pipe, are protected. When open, the
expansive gull-wings, with their anti-slip catwalks, allow for
safe and easy service access.
Versatility. Another Volvo Value.
Every heavy duty, purpose-built Volvo tracked forestry
carrier is quickly and easily adapted to a wide variety
of other forestry related applications. It’s your job site.
So choose Volvo. It is the cost efficient forestry
solution for your greater productivity.
stuMPed? not when you own A VolVo.
ForEstry solutionsFrom start to FinisH
All the Iron. For All the woods.
Whatever forest industry application you are commited to, there is a Volvo Forestry Solution to help you get the job done.
From the industry’s most advanced motor graders, to specialized,
articulated haul trucks, comfortable and fuel efficient wheeled
loaders, or the most progressive, operator-friendly, wheeled or
tracked forestry carriers, Volvo products for forestry are innovative,
tough and ready for the task at hand.
So whether it’s road building and maintenance, harvesting
and processing, log loading or unloading, hauling or sorting
on the landing or at the mill, Volvo Forestry Solutions are
designed and built to help you finish the job easier, more
comfortably and for less cost from start to finish. Trust the Volvo
brand. It’s built on the cornerstones of excellence and value.
volvo C-sEriEs traCkEd ForEstry CarriErsA new stAndArd oF excellence.
Reinforced side doors with HD
screens protect coolers and pumps
while providing maximum air flow.
Optional gull-wing design available
on the FC���1C model adds
HD protection and user friendly
service access.
Punched 305 mm (1� in.) steel-
plate anti-slip catwalks and platforms
provide superior grip when servicing in
wet or icy conditions.
Easy-access HD panels, doors, hinges
and lockable latches protect electrical
components and simplify ground
level maintenance and service.
HD top and side panels and rear-
opening engine cover protects engine
components from falling objects and
provides safe, easy service access.
HD rear body deflector rail for
added protection. Also available,
optional additional �50 l (170 gal)
fuel tank.
HD right-side body deflector rail and
reinforced right corner guard post.
With spacious lockable tool storage.
�
volvo C-sEriEs traCkEd ForEstry CarriErs
HD swing-ring guarding provides full
protection for swing-ring bearing and
grease piping.
Enhanced � mm (.3� in.) underbody
guarding with bolt-head protection
keeps forestry debris and rocks from
damaging the super structure.
Purpose-built, high-walker under-
carriage and high capacity track
motors with HD track motor covers.
Boom and arm with HD forestry
guarding, integrated piping, hydraulic
cylinder and work light guarding.
Volvo Forestry Care Cab with standard
�57 mm (1� in.) cab riser and full
forestry guarding meets global
safety standards.
HD full length track rock guards.
Dual mounted bottom rollers on top.
Reinforced idlers with derail guards.
9
Boom cylinder guard. Optional boom
foot riser increases boom and arm
reach and overall machine stability.
Features vary from model to model.See your Volvo dealer for current specifications.Manufacturer reserves the right to modify the machine without prior notice.
10
traCkEd ForEstry CarriEr FEaturEs
FeAtures FC2
121C
Har
vest
er/
Pro
cess
or/G
ener
al P
urpo
se
FC2
421C
Har
vest
er/
Pro
cess
or/G
ener
al P
urpo
se
FC2
92
4C L
oade
r/Pr
oces
sor/
Gen
eral
Pur
pose
FC33
29
C L
oade
r/S
hove
l/R
oad
Bui
lder
/Pro
cess
or
HE
aV
y D
uTy
uP
PE
R B
OD
y
Standard (Std.) engine cover & radiator guard n Ø Å r
Heavy Duty (HD) engine cover & radiator protection u ò p
RH side and rear deflector guards (HD option only) u ò p
HD hydraulic & fuel tank protection u ò p
HD service doors and latches u ò p
Side impact protection n
Optional gull-wing. Replaces HD engine cover, deflectors and service doors
Ø
Right front corner guard with post n u ò p
HD cowling u ò p
HD upper frame with catwalk & anti-slip plates u ò p
HD left side bumper rail n
HD underbody and belly cover with bolt protection n u ò p
Swing ring protection n u ò p
Swing room guard (not available w/boom riser) n u ò p
un
DE
RC
aR
Ria
GE
Standard lower frame n
High & wide lower frame u ò p
Standard track gear box n
HD track gear box with high draw bar u ò p
HD track motor covers n u ò p
Idler reinforced w/derail guard u ò p
High tension recoil u ò p
HD full length track guard n u ò p
Dual mounted bottom rollers on top u ò p
leGend
Standard n u ò p
Option ® Ø Å r
VolVo cAre cAb GlobAl ProtectIon stAndArds
STanDaRDS DESCRiPTiOn
ISO 10��� (AS �99�), SAE J135� Falling Object Guard
ISO 3��9 (SAE J�31, G �0�),ISO �0�3 (G �09) Falling Object Protective Structure
ISO �0�� (SAE J10��, G �0�) Operator Protective Structure
ISO 1�117 Tip-Over Protective Structure
G �0� Guard for raised cab
G �03 Window guard
FeAtures FC2
121C
Har
vest
er/
Pro
cess
or/G
ener
al P
urpo
se
FC2
421C
Har
vest
er/
Pro
cess
or/G
ener
al P
urpo
se
FC2
92
4C L
oade
r/Pr
oces
sor/
Gen
eral
Pur
pose
FC33
29
C L
oade
r/S
hove
l/R
oad
Bui
lder
/Pro
cess
or
BO
OM
& a
RM
Boom & arm with HD forestry guarding n u ò p
OEM custom front (consult dealer) Ø Å r
Boom lights with HD guards n u ò p
Boom foot riser Ø Å r
Dedicated hydraulic system for harvesters ® Ø Å r
Dedicated hydraulic system for log loaders Ø Å r
OP
ER
aTO
RS
Ca
Bin
HD forestry guarding with PC front window n u ò p
HD forestry guarding with glass front window Ø Å r
5 m/1� ft. wiring harness Ø Å r
�.5 m/� ft. harness Ø Å r
Cab riser �57 mm/1� in. u ò p
OEM cab (consult dealer) Ø Å r
aD
DiT
iOn
aL
FEaT
uR
ES
Standard counter weight n u ò p
Heavier counter weight Ø Å r
Additional fuel tank (with standard counter weight) Ø Å r
Additional oil cooler ® Ø Å r
15 working lights n u ò p
Specifications, dimensions and appearance of models may vary from those shown in this publication. Manufacturer reserves the right to modify models without prior notice.
11
spECiFiCations
descrIPtIon FC2121C FC2421C FC2924C FC3329C
En
Gin
E
Engine Model Volvo D�E EAE3 Volvo D�E EAE3 Volvo D7E EBE3 Volvo D7E EAE3
Maximum HP At 1�00 rpm 1�00 rpm 1�00 rpm 1�00 rpm
Gross kW/HP 1�3 kW 165 hp 1�3 kW 165 hp 13� kW 185 hp 153 kW 205 hp
Net kW/HP (ISO 9��9/J13�9)
110 kW 147 hp 110 kW 147 hp 1�5 kW 168 hp 1�3 kW 192 hp
Maximum Torque (1350 rpm)
735 Nm 553 ft.lb. 735 Nm 553 ft.lb. �70 Nm 642 ft.lb. 9�5 Nm 712 ft.lb.
Displacement 5.7 l 348 cu.in. 5.7 l 348 cu.in. 7.1 l 436 cu.in. 7.1 l 436 cu.in.
Bore 9� ml 3.86 cu.in. 9� ml 3.86 cu.in. 10� ml 4.25 cu.in. 10� ml 4.25 cu.in.
Stroke 1�� mm 4.96 in. 1�� mm 4.96 in. 130 mm 5.12 in. 130 mm 5.12 in.
ELE
CTR
iCa
L Voltage �� volt �� volt �� volt �� volt
Batteries � x 1� volt � x 1� volt � x 1� volt � x 1� volt
Battery Capacity 150 Ah 150 Ah �00 Ah �00 Ah
Alternator �� volt �0 amp �� volt �0 amp �� volt �0 amp �� volt �0 amp
Ca
PaC
iTiE
S
Fuel Tank 350 l 92 gal 350 l 92 gal �70 l 124 gal �70 l 124 gal
Additional Fuel Tank (O) �50 l 172 gal ��5 l 181 gal �75 l 178 gal
Hydraulic System (Total) ��5 l 75 gal ��5 l 75 gal 3�5 l 86 gal �00 l 106 gal
Hydraulic Tank 1�0 l 42 gal 1�0 l 42 gal 195 l 52 gal 195 l 52 gal
Engine Oil �5 l 7 gal �5 l 7 gal 30 l 8 gal 30 l 8 gal
Engine Coolant 3� l 8.5 gal 3� l 8.5 gal 3� l 10 gal 3� l 10 gal
Swing Reduction Unit � l 1.6 gal � l 1.6 gal 1� l 3.2 gal 1� l 3.2 gal
Travel Reduction Unit � x 5.7 l 2 x 1.5 gal � x 5.� l 2 x 1.4 gal � x �.1 l 2 x 1.6 gal � x 5.7 l 2 x 1.5 gal
Sw
inG Maximum Swing Speed 11.� rpm 11.� rpm 11.� rpm 10.� rpm
Swing Torque 7�.� kNm 56,497 ft.lb. 7�.� kNm 56,497 ft.lb. �5.� kNm 63,135 ft.lb. 10�.3 kNm 76,927 ft.lb.
DR
iVE Maximum Drawbar Pull 1�3 kN 41,230 lb. �09 kN 46,960 lb. �30 kN 51,818 lb. �5� kN 57,992 lb.
Maximum Speed 5.5 km/h 3.4 mph �.7 km/h 2.9 mph �.� km/h 2.8 mph 3.� km/h 2.4 mph
Gradeability 35 deg 70% 35 deg 70% 35 deg 70% 35 deg 70%
un
DE
RC
aR
Ria
GE Track Pads � x �9 � x �9 � x 50 � x ��
Link Pitch 190 mm 7.5 in. 190 mm 7.5 in. �03 mm 8 in. �15 mm 8.5 in.
Shoe Width (Triple Grouser)
500/�00/700 mm20/24/28 in.
�00/700/�00 mm24/28/32 in.
�00/700/�00 mm24/28/32 in.
�00 mm32 in.
Bottom Rollers � x 9 � x 9 � x 9 � x 9
Top Rollers � x � � x � � x � � x �
Hy
DR
au
LiC
S
Main Pump Type � x Variable Displacement Axial Piston Pumps
Max Flow � x �00 l/min2 x 53 gal/min
� x �00 l/min2 x 53 gal/min
� x �30 l/min2 x 61 gal/min
� x �50 l/min2 x 66 gal/min
Pilot Pump Type Gear Pump
Max Flow 1� l/min 4.8 gal/min 1� l/min 4.8 gal/min �0 l/min 5.3 gal/min 19 l/min 5.0 gal/min
Hydraulic Motors
Travel Variable Displacement Axial Piston Motor With Mechanical Brake
Swing Fixed Displacement Axial Piston Motor With Mechanical Brake
Hydraulic Cylinders
Boom 1�5 x 1�35 mm4.9 x 48.6 in.
1�5 x 1�35 mm4.9 x 48.6 in.
135 x 13�� mm5.3 x 53 in.
1�0 x 1��0 mm5.5 x 58.3 in.
Arm 135 x 15�0 mm5.3 x 60.6 in.
135 x 15�0 mm5.3 x 60.6 in.
1�0 x 1��5 mm5.5 x 65.6 in.
150 x 17�5 mm5.9 x 68.8 in.
Bucket 1�0 x 10�5 mm4.7 x 41.9 in.
1�0 x 10�5 mm4.7 x 41.9 in.
130 x 1150 mm5.1 x 45.3 in.
1�0 x 11�0 mm 5.5 x 44.9 in.
1�
ground prEssurE
descrIPtIonoPerAtInG weIGht*
trAck wIdth
shoe wIdth
Ground Pressure
FC2121C (Standard) Boom 18 ft 8 in (5.7 m) arm 9 ft 6 in (2.9 m) Counterweight 9260 lb (4200 kg)
Triple Grouser 23530 kg 51880 lb. 2890 mm 9 ft 6 in. 500 mm 20 in. 58.8 kPa 8.5 psi
23780 kg 52430 lb. 2990 mm 9 ft 10 in. 600 mm 24 in. 49.0 kPa 7.1 psi
24235 kg 53440 lb. 3090 mm 10 ft 2 in. 700 mm 28 in. 43.1 kPa 6.3 psi
Triple Grouser HD 23950 kg 52810 lb. 2990 mm 9 ft 10 in. 600 mm 24 in. 50.0 kPa 7.3 psi
Double Grouser 24490 kg 54000 lb. 3090 mm 10 ft 2 in. 700 mm 28 in. 43.1 kPa 6.3 psi
FC2421C (Standard) Boom 18 ft 8 in (5.7 m) arm 9 ft 6 in (2.9 m) Counterweight 9260 lb (4200 kg)
Triple Grouser 25610 kg 56470 lb. 3220 mm 10 ft 7 in. 600 mm 24 in. 53.0 kPa 7.7 psi
26060 kg 57460 lb. 3320 mm 10 ft 11 in. 700 mm 28 in. 46.1 kPa 6.7 psi
26345 kg 58090 lb. 3420 mm 11 ft 3 in. 800 mm 32 in. 41.2 kPa 6.0 psi
Double Grouser 26315 kg 58020 lb. 3320 mm 10 ft 11 in. 700 mm 28 in. 47.1 kPa 6.8 psi
FC2421C (Gullwing) Boom 18 ft 8 in (5.7 m) arm 9 ft 6 in (2.9 m) Counterweight 9260 lb (4200 kg)
Triple Grouser 26410 kg 58230 lb. 3220 mm 10 ft 7 in. 600 mm 24 in. 54.9 kPa 8.0 psi
26860 kg 59230 lb. 3320 mm 10 ft 11 in. 700 mm 28 in. 48.0 kPa 7.0 psi
27145 kg 59850 lb. 3420 mm 11 ft 3 in. 800 mm 32 in. 42.2 kPa 6.1 psi
Double Grouser 27115 kg 59790 lb. 33200 mm 10 ft 11 in. 700 mm 28 in. 48.0 kPa 7.0 psi
FC2924C (Standard) Boom 19 ft 8 in (6.0 m) arm 9 ft 9 in (2.97m) Counterweight 9970 lb (4520 kg)
Triple Grouser 31459 kg 69370 lb. 3400 mm 11 ft 2 in. 600 mm 24 in. 59.8 kPa 8.7 psi
32019 kg 70600 lb. 3500 mm 11 ft 6 in. 700 mm 28 in. 52.0 kPa 7.5 psi
32389 kg 71420 lb. 3600 mm 11 ft 10 in. 800 mm 32 in. 46.1 kPa 6.7 psi
Double Grouser 32174 kg 70940 lb. 3500 mm 11 ft 6 in. 700 mm 28 in. 52.0 kPa 7.5 psi
FC2924C (add. Fuel Tank) Boom 19 ft 8 in (6.0 m) arm 9 ft 9 in (2.97 m) Counterweight 9970 lb (4520 kg)
Triple Grouser 32255 kg 71120 lb. 3400 mm 11 ft 2 in. 600 mm 24 in. 60.8 kPa 8.8 psi
32815 kg 72360 lb. 3500 mm 11 ft 6 in. 700 mm 28 in. 53.0 kPa 7.7 psi
33185 kg 73170 lb. 3600 mm 11 ft 10 in. 800 mm 32 in. 47.1 kPa 6.8 psi
Double Grouser 32970 kg 72700 lb. 3500 mm 11 ft 6 in. 700 mm 28 in. 53.9 kPa 7.8 psi
FC3329C (Standard) Boom 20 ft 4 in (6.2 m) arm 10 ft (3.05 m) Counterweight 11940 lb (5417 kg)
Triple Grouser 35720 kg 78760 lb. 3600 mm 11 ft 10 in. 800 mm 32 in. 50.0 kPa 7.3 psi
Double Grouser 35385 kg 78020 lb. 3400 mm 11 ft 2 in. 600 mm 24 in. 66.7 kPa 9.7 psi
35850 kg 79050 lb. 3500 mm 11 ft 6 in. 700 mm 28 in. 57.9 kPa 8.4 psi
FC3329C (add. Fuel Tank) Boom 20 ft 4 in (6.2 m) arm 10 ft (3.05 m) Counterweight 11940 lb (5417 kg)
Triple Grouser 36520 kg 80530 lb. 3600 mm 11 ft 10 in. 800 mm 32 in. 51.0 kPa 7.4 psi
Double Grouser 36185 kg 79790 lb. 3400 mm 11 ft 2 in. 600 mm 24 in. 67.7 kPa 9.8 psi
36650 kg 80810 lb. 3500 mm 11 ft 6 in. 700 mm 28 in. 58.8 kPa 8.5 psi
*Before attachment and fuel
volvo’s EnginE lEadErsHip spans land, sEa, sky and spaCEAs the world’s largest manufacturer of 9-to-1� litre diesel engines, Volvo has unmatched expertise designing power systems that move the world. Volvo engines for Volvo Forestry Equipment,
Volvo Construction Equipment, Volvo Aero, Volvo Buses, Volvo Penta and Volvo Trucks define productivity and fuel economy. Our performance has been honed on land, over the sea, across the sky and into space.
Leading research and development keeps all Volvo Group products at the forefront of productivity. So when we say Volvo engines are tested and proven, you can believe it. Trust in it. It’s the real advantage of Volvo Power.
13
dimEnsions
descrIPtIon FC2121C FC2421C FC2421C (Gullwing) FC2924C FC3329CBOOM 5.7 m 18 ft. 8 in. 5.7 m 18 ft. 8 in. 5.7 m 18 ft. 8 in. 6.0 m 19 ft. 8 in. 6.2 m 20 ft. 4 in.
aRM 2.5 m 8 ft. 2 in. 2.9 m 9 ft. 6 in. 2.9 m 9 ft. 6 in. 2.97 m 9 ft. 9 in. 3.05 m 10 ft.
FRaME Standard lower frame High walker 450 mm cab riser Additional fuel tank
High walker 450 mm cab riser Additional fuel tank
High walker 450 mm cab riser Additional fuel tank
High walker 450 mm cab riser Additional fuel tank
a) OVERaLL wiDTH OF uPPER STRuCTuRE
2590 mm 8 ft. 6 in. 2790 mm 9 ft. 2 in. 2790 mm 9 ft. 2 in. 2970 mm 9 ft. 9 in. 2790 mm 9 ft. 2 in.
B) OVERaLL wiDTH 2730 mm 8 ft. 11 in. 3300 mm 10 ft. 10 in. 3300 mm 10 ft. 10 in. 3490 mm 11 ft. 5 in. 3490 mm11 ft. 5 in.
C) OVERaLL HEiGHT OF FOG
3050 mm 10 ft. 3725 mm 12 ft. 3 in. 3725 mm12 ft. 3 in. 3935 mm 12 ft. 11 in. 3975 mm13 ft.
D) TaiL SwinG RaDiuS 2750 mm 9 ft. 3210 mm 10 ft. 6 in. 3210 mm 10 ft. 6 in. 3365 mm 11 ft. 3415 mm 11 ft. 2 in.
E) OVERaLL HEiGHT OF EnGinE HOOD
2150 mm 7 ft. 1 in. 2795 mm 9 ft. 2 in. 2940 mm 9 ft. 8 in. 2970 mm 9 ft. 9 in. 3000 mm 9 ft. 10 in.
F) COunTERwEiGHT CLEaRanCE
1041 mm 3 ft. 5 in. 1194 mm 3 ft. 11 in. 1194 mm 3 ft. 11 in. 1422 mm 4 ft. 8 in. 1448 mm 4 ft. 9 in.
G) TuMBLER LEnGTH 3660 mm 12 ft. 3660 mm 12 ft. 3635 mm11 ft. 11 in. 4015 mm 13 ft. 2 in. 4015 mm 13 ft. 2 in.
H) TRaCk LEnGTH 4460 mm 14 ft. 8 in. 4460 mm 14 ft. 8 in. 4455 mm 14 ft. 7 in. 4891 mm 16 ft. 1 in. 4968 mm 16 ft. 4 in.
i) TRaCk GauGE 2390 mm 7 ft. 10 in. 2620 mm 8 ft. 7 in. 2620 mm 8 ft. 7 in. 2800 mm 9 ft. 2 in. 2800 mm 9 ft. 2 in.
J) SHOE wiDTH 700 mm 28 in. 700 mm 28 in. 700 mm 28 in. 700 mm 28 in. 700 mm 28 in.
k) Min. GROunD CLEaRanCE
460 mm* 18 in. 635 mm* 25 in. 635 mm† 25 in 745 mm† 29 in. 782 mm† 31 in.
L) OVERaLL LEnGTH 9650 mm31 ft. 8 in.
10000 mm32 ft. 10 in.
10000 mm32 ft. 10 in.
10440 mm34 ft. 3 in.
10740 mm35 ft. 3 in.
M) OVERaLL HEiGHT OF BOOM
3050 mm 10 ft. 2960 mm 9 ft. 9 in. 2960 mm 9 ft. 9 in. 3040 mm 9 ft. 12 in. 3235 mm 10 ft. 7 in.
*With �00 mm HD triple grouser †With 700 mm double grouser
1�
descrIPtIon FC2121C FC2421C descrIPtIon FC2924C FC3329CFRaME Standard lower frame Standard lower frame High walker with
boom riserHigh walker without boom riser
FRaME High walker with boom riser
High walker without boom riser
High walker with boom riser
High walker without boom riser
BOOM 5.7 m 18 ft. 8 in. 5.7 m 18 ft. 8 in. 5.7 m 18 ft. 8 in. 5.7 m 18 ft. 8 in. BOOM 6.0 m 19 ft. 8 in. 6.0 m 19 ft. 8 in. 6.2 m 20 ft. 4 in. 6.2 m 20 ft. 4 in.
aRM 2.5 m 8 ft. 2 in. 2.9 m 9 ft. 6 in. 2.9 m 9 ft. 6 in. 2.9 m 9 ft. 6 in. aRM 2.97 m 9 ft. 9 in. 2.97 m 9 ft. 9 in. 3.05 m 10 ft. 3.05 m 10 ft.
a) Max. REaCH FROM SwinG CEnTER
8080 mm 26 ft. 6 in. 8460 mm 27 ft. 9 in. 8460 mm 27 ft. 9 in. 8460 mm 27 ft. 9 in. a) Max. REaCH FROM SwinG CEnTER
8720 mm 28 ft. 7 in. 8720 mm 28 ft. 7 in. 9090 mm 29 ft. 10 in. 9090 mm 29 ft. 10 in.
B) Max. DEPTH FROM GROunD
4835 mm 15 ft. 10 in. 5235 mm 17 ft. 2 in. 4015 mm 13 ft. 2 in. 5070 mm 16 ft. 8 in. B) Max. DEPTH FROM GROunD
4145 mm 13 ft. 7 in. 5130 mm 16 ft. 10 in. 4665 mm 15 ft. 4 in. 5450 mm 17 ft. 11 in.
C) Max. LiFTinG HEiGHT 7925 mm 26 ft. 8150 mm 26 ft. 9 in. 9885 mm 32 ft. 5 in. 8315 mm 27 ft. 3 in. C) Max. LiFTinG HEiGHT 10295 mm 33 ft. 9 in. 8640 mm 28 ft. 4 in. 10570 mm 34 ft. 8 in. 8940 mm 29 ft. 4 in.
D) Max. HEiGHT On DuMPinG
4300 mm 14 ft. 1 in. 3910 mm 12 ft. 10 in. 4880 mm 16 ft. 4070 mm 13 ft. 4 in. D) Max. HEiGHT On DuMPinG
5300 mm 17 ft. 5 in. 4500 mm 14 ft. 9 in. 5405 mm 17 ft. 9 in. 4560 mm 14 ft. 12 in.
E) Min. FROnT SwinG RaDiuS
3670 mm 12 ft. 3645 mm 11 ft. 12 in. 1765 mm 5 ft. 9 in. 3645 mm 11 ft. 12 in. E) Min. FROnT SwinG RaDiuS
1995 mm 6 ft. 7 in. 3890 mm 12 ft. 9 in. 2450 mm 8 ft. 4185 mm 13 ft. 9 in.
working rangEs
15
descrIPtIon FC2121C FC2421C descrIPtIon FC2924C FC3329CFRaME Standard lower frame Standard lower frame High walker with
boom riserHigh walker without boom riser
FRaME High walker with boom riser
High walker without boom riser
High walker with boom riser
High walker without boom riser
BOOM 5.7 m 18 ft. 8 in. 5.7 m 18 ft. 8 in. 5.7 m 18 ft. 8 in. 5.7 m 18 ft. 8 in. BOOM 6.0 m 19 ft. 8 in. 6.0 m 19 ft. 8 in. 6.2 m 20 ft. 4 in. 6.2 m 20 ft. 4 in.
aRM 2.5 m 8 ft. 2 in. 2.9 m 9 ft. 6 in. 2.9 m 9 ft. 6 in. 2.9 m 9 ft. 6 in. aRM 2.97 m 9 ft. 9 in. 2.97 m 9 ft. 9 in. 3.05 m 10 ft. 3.05 m 10 ft.
a) Max. REaCH FROM SwinG CEnTER
8080 mm 26 ft. 6 in. 8460 mm 27 ft. 9 in. 8460 mm 27 ft. 9 in. 8460 mm 27 ft. 9 in. a) Max. REaCH FROM SwinG CEnTER
8720 mm 28 ft. 7 in. 8720 mm 28 ft. 7 in. 9090 mm 29 ft. 10 in. 9090 mm 29 ft. 10 in.
B) Max. DEPTH FROM GROunD
4835 mm 15 ft. 10 in. 5235 mm 17 ft. 2 in. 4015 mm 13 ft. 2 in. 5070 mm 16 ft. 8 in. B) Max. DEPTH FROM GROunD
4145 mm 13 ft. 7 in. 5130 mm 16 ft. 10 in. 4665 mm 15 ft. 4 in. 5450 mm 17 ft. 11 in.
C) Max. LiFTinG HEiGHT 7925 mm 26 ft. 8150 mm 26 ft. 9 in. 9885 mm 32 ft. 5 in. 8315 mm 27 ft. 3 in. C) Max. LiFTinG HEiGHT 10295 mm 33 ft. 9 in. 8640 mm 28 ft. 4 in. 10570 mm 34 ft. 8 in. 8940 mm 29 ft. 4 in.
D) Max. HEiGHT On DuMPinG
4300 mm 14 ft. 1 in. 3910 mm 12 ft. 10 in. 4880 mm 16 ft. 4070 mm 13 ft. 4 in. D) Max. HEiGHT On DuMPinG
5300 mm 17 ft. 5 in. 4500 mm 14 ft. 9 in. 5405 mm 17 ft. 9 in. 4560 mm 14 ft. 12 in.
E) Min. FROnT SwinG RaDiuS
3670 mm 12 ft. 3645 mm 11 ft. 12 in. 1765 mm 5 ft. 9 in. 3645 mm 11 ft. 12 in. E) Min. FROnT SwinG RaDiuS
1995 mm 6 ft. 7 in. 3890 mm 12 ft. 9 in. 2450 mm 8 ft. 4185 mm 13 ft. 9 in.
Not all products are available in all markets. Under our policy of continuous improvement, we reserve the right to change specifications and design without prior notice. The illustrations do not necessarily show the standard version of the machine.
Reg. No. 22 B 100 4246 EnglishPrinted in USA 01/08 - 0,0 USAVolvo, AshevilleCopyright © 2008 Volvo
Volvo Construction Equipment is different. It’s designed, built and supported in a different way. That difference comes from an engineering heritage of over 170 years. A heritage of thinking first about the people who actually use the machines. About how to help them be safer, more comfortable, more productive. About the environment we all share. The result of that thinking is a growing range of machines and a global support network dedicated to helping you do more. People around the world are proud to use Volvo. And we’re proud of what makes Volvo different – More care. built in.