vos/vlmi administration system administrator...
TRANSCRIPT
Virtual OneStop/ Virtual LMI
Version 8.0
VOS/VLMI Administration System Administrator Guide
Geographic Solutions WWW.GEOGRAPHICSOLUTIONS.COM
1001 Omaha Circle Palm Harbor, FL 34683 Tel: (727) 7867955 Fax: (727) 7865871
Copyright ©2006 by Geographic Solutions, Inc. All rights reserved. Copying and/or distributing this document, in whole or in part, without the express written permission of Geographic Solutions, Inc., is a violation of U.S. Copyright Laws. Trademarks and Acknowledgments Geographic Solutions and Virtual OneStop are trademarks of Geographic Solutions, Inc. Other products or services mentioned herein may be identified by trademarks designated by the companies that market those products or services. Make inquiries concerning those trademarks directly to those companies.
V8.0 R2 – 9/2006 iii VOS/VLMI System Administrator Guide
Contents 1: OVERVIEW AND CONVENTIONS 1
System Log On................................................................................................................................................ 1 Navigation Menu............................................................................................................................................. 3
Toolbar .....................................................................................................................................................................3
2: SYSTEM SETTINGS 5 Email Addresses.............................................................................................................................................. 5 System Defaults............................................................................................................................................... 6
System Parameters Section ......................................................................................................................................8 ALMIS Parameters Section......................................................................................................................................9 Candidate Searching Parameters Section ...............................................................................................................10 Database Parameters Section..................................................................................................................................11 Employer Parameters Section.................................................................................................................................11 Individual Parameters Section................................................................................................................................12 Job Order Parameters Section ................................................................................................................................13 Job Search Parameters Section...............................................................................................................................13 Virtual Recruiter Parameters Section .....................................................................................................................15 VOS Parameters Section ........................................................................................................................................15
Administer Event Calendar ............................................................................................................................ 16
3: STAFF ADMINISTRATION 19 Administer a Staff Account............................................................................................................................ 19
User Information Section .......................................................................................................................................24 Access Privileges—Access Group Section ............................................................................................................24 Access Privileges—Individual Activities Tab Section...........................................................................................24 Access Privileges—Individual Assessment Tab Section........................................................................................25 Access Privileges—Case Assignment Section .......................................................................................................25 Access Privileges—Case Notes Tab Section..........................................................................................................25 Access Privileges—Employer Case Management Section.....................................................................................25 Access Privileges—Employer File Folders Section ...............................................................................................25 Access Privileges—Manage Employers Section....................................................................................................25 Access Privileges—Individual File Folders Section ..............................................................................................26 Access Privileges—Individual Fund Tracking Section ..........................................................................................26 Access Privileges—Manage Individuals Section ...................................................................................................26 Access Privileges—Manage Job Orders Section....................................................................................................27 Access Privileges—Manage Appointments/Messages Section ..............................................................................27 Access Privileges—Manage Profiling Section.......................................................................................................27 Access Privileges—Staff Service Reports Section.................................................................................................27 Access Privileges—Manage Satisfaction Surveys Section.....................................................................................28 Access Privileges—Individual Programs Tab Section ...........................................................................................29
Create a Staff Account................................................................................................................................... 29 Staff User Information............................................................................................................................................29
State Staff Profile .............................................................................................................................................31 Local Staff Profile ............................................................................................................................................31 Statewide Provider Profile ................................................................................................................................32
Create Privilege Groups................................................................................................................................. 33 Privilege Group Name Section...............................................................................................................................34 Access Privileges—Individual Activities Tab Section...........................................................................................34 Access Privileges—Individual Assessment Tab Section........................................................................................34 Access Privileges—Case Assignment Section .......................................................................................................35 Access Privileges—Case Notes Tab Section..........................................................................................................35 Access Privileges—Employer Case Management Section.....................................................................................35 Access Privileges—Employer File Folders Section ...............................................................................................35
Contents
V8.0 R2 – 9/2006 iv VOS/VLMI System Administrator Guide
Access Privileges—Manage Employers Section....................................................................................................35 Access Privileges—Individual File Folders Section ..............................................................................................36 Access Privileges—Individual Fund Tracking Section ..........................................................................................36 Access Privileges—Manage Individuals Section ...................................................................................................36 Access Privileges—Manage Job Orders Section....................................................................................................37 Access Privileges—Manage Appointments/Messages Section ..............................................................................37 Access Privileges—Manage Profiling Section.......................................................................................................37 Access Privileges—Staff Service Reports Section.................................................................................................37 Access Privileges—Manage Satisfaction Surveys Section.....................................................................................38 Access Privileges—Individual Programs Tab Section ...........................................................................................38
Change Privilege Group Settings ................................................................................................................... 39 Delete Privilege Groups................................................................................................................................. 39
4: USER ADMINISTRATION 41 Administer Individuals .................................................................................................................................. 42
Archive Individual Records....................................................................................................................................44 Restore Individual Records ....................................................................................................................................45 Delete Individual Records ......................................................................................................................................46
Administer Employers ................................................................................................................................... 46 Archive Employer Records ....................................................................................................................................49 Restore Employer Records .....................................................................................................................................49 Delete Employer Records.......................................................................................................................................49
Administer Analysts ...................................................................................................................................... 49 Archive Analyst Records........................................................................................................................................51 Restore Analyst Records ........................................................................................................................................52 Delete Analyst Records ..........................................................................................................................................53
5: SERVICE ADMINISTRATION 54 Individual/Employer Services ........................................................................................................................ 54
Background ............................................................................................................................................................55 Fund Tracking Data Structure ................................................................................................................................56 Status Change.........................................................................................................................................................56 Edit Service ............................................................................................................................................................57 Add Service............................................................................................................................................................60
Scan Card Terminals ..................................................................................................................................... 60 Change Terminal Status .........................................................................................................................................61 Add Scan Card Terminals ......................................................................................................................................61 Edit Scan Card Terminals.......................................................................................................................................62
Scan Card Events........................................................................................................................................... 62 Change Event Status...............................................................................................................................................63 Add Event...............................................................................................................................................................64 Edit Event...............................................................................................................................................................67
6: DATA ADMINISTRATION 68 Import/Export Data........................................................................................................................................ 68 Data Modification.......................................................................................................................................... 69
Search for Records .................................................................................................................................................71 Modify Record .......................................................................................................................................................71 Add New Record....................................................................................................................................................72
Archive Records............................................................................................................................................ 72 Restore Record .............................................................................................................................................. 74 Help System Maintenance ............................................................................................................................. 76
Edit Existing Help Record......................................................................................................................................77 Help Text Display ............................................................................................................................................79
Generic Setup................................................................................................................................................ 80 Create/Edit Program...............................................................................................................................................81
Contents
V8.0 R2 – 9/2006 v VOS/VLMI System Administrator Guide
Program/LWIA Association...................................................................................................................................82
7: ADMIN ADMINISTRATION 83 Administer an Admin Account....................................................................................................................... 83
Modify an Administrator’s Account.......................................................................................................................85 Delete an Administrator’s Account ........................................................................................................................86 Add a New Administrator ......................................................................................................................................86
Create an Admin Account.............................................................................................................................. 87
GLOSSARY G1
INDEX I1
Contents
V8.0 R2 – 9/2006 vi VOS/VLMI System Administrator Guide
[This page intentionally left blank.]
V8.0 R2 – 9/2006 1 VOS/VLMI System Administrator Guide
1: Overview and Conventions The Virtual OneStop/Virtual LMI (VOS/VLMI) system is a valuable tool for anyone interested in looking for work, training, or career exploration. Job seekers, students, employers, and others seeking employment and training support will find it convenient and helpful. The VOS/VLMI Administration system lets a person in an Application Administrator role maintain and control the access for these different types of users, their accounts, and the data they can see. This manual presents a detailed analysis of the Virtual OneStop/Virtual LMI (VOS/VLMI) Administration system, as it relates to system administrator (SA) functionality. This person is responsible for numerous administrative duties, examples of which include the following:
• Setting staff user access levels
• Maintaining data records
• Establishing default values or views
• Managing customer user accounts
• Viewing and purging outdated records
• Managing activity service codes The users who will conduct system administrator functions should possess a strong understanding of computer terminology, navigation, and supporting equipment (mouse, browser, Internet, etc.). These persons will ultimately perform software and hardware maintenance to ensure the integrity of the onestop agency’s daily operations. Note: Although the typical administrator will be familiar with general web browser and VOS specific
conventions, for a basic overview of Virtual OneStop and of conventions used in the VOS system, as well as in the user manuals, refer to the “Chapter 1, Overview and Conventions” in the Staff User Guide.
System Log On To log on to the Admin system, perform the following steps: Step Action
1 Open your Web browser and type the appropriate URL in the address box. A screen appears, similar in function to the one below:
Login Screen
2 Type your user name and password. Note: The initial login to the Admin system is reserved for the Master Administrator. This person
establishes other system administrators, both on the State and Local level.
Overview and Conventions
V8.0 R2 – 9/2006 2 VOS/VLMI System Administrator Guide
3 Click Sign In. The Directory of Administrative Services screen appears, a sample of which appears below. Note: Depending on your Admin System deployment, the appearance and functions may look different. Some Administrative Service options may not be included. Please refer to your client administrator should you have any questions.
Directory of Administrative Services Screen
From here, you can select from the following options:
• Content Publisher — controls specific information available to Virtual OneStop/Virtual LMI system users, such as community service programs, news articles, and other pertinent information. For details of this service component, refer to the Geographic Solutions Content Publisher User Guide.
• System Settings — controls system preferences for data retrieval and default display settings. • Staff Administration — controls staff account information. • User Administration — controls individual, employer, and analyst account information (if
applicable). • Service Administration — controls services for individual and employer accounts, and scan
card terminal configuration (if applicable). • Data Administration — controls the modification, export, and import of account data. • Admin Administration — controls account information for system administrators.
Note: Only masterlevel administrators have access to the Admin Administration component. State and locallevel administrators won’t see this option, unless they are granted masterlevel administrative rights.
Overview and Conventions
V8.0 R2 – 9/2006 3 VOS/VLMI System Administrator Guide
Navigation Menu The Administration system includes a navigation menu that allows you to quickly and easily access any administrative service within those listed. The following figure displays a sample navigation menu with fly outs enabled:
Navigation Menu
Note: Depending on your Admin system deployment, the appearance and functions might look different.
The left navigation menu contains flyout menus that allow cascading menus (or submenus) to appear, providing access to administration services. To access a function from the navigation menu, click that function. Functions with a rightfacing triangle () have a submenu that appears when you move the mouse pointer over them. In the example above, the mouse pointer was placed over the Staff Administration option. To select a submenu item, click it.
Toolbar At the lower part of most pages, a toolbar or line of linked words appears (see the following sample). Click a desired link to access its location or function.
Sample Toolbar
Refer to the following list for toolbar assistance:
• Home—displays the Login screen. • Services—displays the Directory of Administrative Services screen. • Admin Profile—displays the User Information section of the Edit Administrator Account screen,
allowing data modification to your account. • Log Off—displays a popup window allowing the user to exit the system.
Overview and Conventions
V8.0 R2 – 9/2006 4 VOS/VLMI System Administrator Guide
[This page intentionally left blank.]
V8.0 R2 – 9/2006 5 VOS/VLMI System Administrator Guide
2: System Settings The System Settings option allows administrators to control preset information displayed in the VOS/VLMI system. To access this service option, employ one of the following methods:
• On the navigation menu, click System Settings. • On the Directory of Administrative Services screen, click System Settings.
A screen appears, similar to the one below:
System Settings Options Screen
You can select from the following options:
• Email Addresses—maintains administrator email addresses. • System Defaults—controls preset system display information. • Administer Event Calendar—controls the onestop agency events displayed in your VOS/VLMI
system.
Note: Components may vary depending on your Admin system deployment.
Email Addresses Click the Email Addresses link to manage administrator email address information for a service in the Virtual OneStop/Virtual LMI system. To access the Email Addresses option, employ one of the following methods:
• On the navigation menu, click System Settings4Email Addresses. • On the System Settings Options screen, click Email Addresses.
The following figure displays a sample Modify Email Address screen:
To control LMI data formats, refer to the “System Defaults” topic.
System Settings
V8.0 R2 – 9/2006 6 VOS/VLMI System Administrator Guide
Modify Email Address Screen
In the table pictured above, the system maintains two points of contact that will receive emails for various functions:
• Employer Services contact—receives email alerts from the system when one of three actions occur: ♦ 1 A new employer selfregisters in the system ♦ 2 An employer creates a new job order ♦ 3 An employer modifies an existing job order
• Webmaster contact—receives emails from employer and individual system users when they compose emails using the Assistance Center4Email Your Questions service component.
To modify an email address for a particular contact, type the new address in the Email Address box and click Save Changes.
System Defaults Your Virtual OneStop/Virtual LMI deployment has standard preset information, most of which derives from the initial kickoff meeting held between Geographic Solutions and the client project team. Geographic Solutions initially establishes the system defaults on the client’s behalf, but clients that host the system will be responsible for making adjustments. To view or modify these standard default settings, employ one of the following methods:
• On the navigation menu, click System Settings4System Defaults. • On the System Settings Options screen, click System Defaults.
The following figure displays a sample Default Settings screen: Note: System default options may vary depending on your Admin system deployment.
System Settings
V8.0 R2 – 9/2006 7 VOS/VLMI System Administrator Guide
Click a jump link to access that section information.
Default Settings Screen
Due to the screen’s extensive information, the screen is broken down into sections, each of which controls specific information for your Virtual OneStop or Virtual LMI system.
To complete each desired section, type text, click a radio button ( ), or select a value from a dropdown list. The system provides jump links to separate each section and provide swift access to
System Settings
V8.0 R2 – 9/2006 8 VOS/VLMI System Administrator Guide
either the top or bottom of the screen. You may also click a desired jump link along the screen top to access that section. When complete, click Save Changes. To help you complete default settings for your Virtual OneStop/Virtual LMI system, see the following figures and descriptions for each section of the Defaults Settings screen. Most settings employ a “one time only” setup.
System Parameters Section Use this parameter section to establish generic system settings.
System Parameters Section
Item System(s) Description
System Parameters Section
Default menu style
VOS, VLMI Select whether flyouts (cascading menus) will be enabled or disabled in the system.
Domain name VOS, VLMI Type your system’s IP address.
Email address to route error reports to
VOS, VLMI Special software monitors system performance. Type the email address of the recipient who will receive email notification if a page crash occurs.
Occupational videos URL
VOS, VLMI Type the server file path that maintains video summaries for mainstream occupations. Users access this tool within Career Services4Career Informer or Labor Market Services4Occupational Profile. This is setup protocol for clients that host the system.
SMTP enabled VOS, VLMI Select whether the system will permit email exchange. SMTP server address
VOS, VLMI Type the SMTP (Simple Mail Transfer Protocol) server address if email exchange within your system is enabled.
Spell check physical dictionary path
VOS, VLMI Type the server file path that maintains the system’s spell check dictionary. This is setup protocol for clients that host the system.
System Settings
V8.0 R2 – 9/2006 9 VOS/VLMI System Administrator Guide
Item System(s) Description SSL enabled VOS, VLMI Select No if the proper SSL licensure has NOT been secured. This
option helps support various web server configurations. System name (friendly name)
VOS, VLMI Type your system’s username as it would appear on the Home page
System region name
VOS, VLMI Type your system’s regional name, if applicable. This only applies to local VOS/VLMI systems, not state systems.
The form address used for emails generated from the web server.
VOS, VLMI Type the “from” email address on the email server that is responsible for generating email alerts. This is a security protocol for clients that host the system.
Virtual Directory VOS, VLMI Type the portion of your system’s URL address that follows the .com, .org, or .edu suffix.
ALMIS Parameters Section Use this parameter section to manage data displayed from America’s Labor Market Information System (ALMIS).
ALMIS Parameters Section
Item System(s) Description
ALMIS Parameters Section
Industry table time period (periodyear + periodtype +period)
VOS, VLMI Type the specific date to control which industry data set displays in the system. Industry data is updated quarterly.
InfoUSA EMPDB time period (periodyear + periodtype +period)
VOS, VLMI Type the specific date that corresponds to the employer data displayed. Geographic Solutions manages this date information according to copyright laws established by InfoUSA ® .
SFI/SFE area profile population high year
VOS, VLMI Type the maximum 4digit year to create a date range that controls population statistics. This information may be viewed by selecting Labor Market Services4Area Profile.
System Settings
V8.0 R2 – 9/2006 10 VOS/VLMI System Administrator Guide
Item System(s) Description
SFI/SFE area profile population low year
VOS, VLMI Type the minimum 4digit year to create a date range that controls population statistics. This information may be viewed by selecting Labor Market Services4Area Profile.
SFI/SFE area profile population source
VOS, VLMI Type the appropriate number to denote which source provided the population statistics (for example, US Census, State Census Bureau, University studies, etc). If you wish to modify this value, please contact Geographic Solutions for assistance.
SFI / SFE industry areas where found area distribution
VOS, VLMI Select the appropriate value to control the display of employment statistics (county, MSA, or WIA distribution). This information may be viewed by selecting Labor Market Services4Industry Profile4Display More Information about this Industry4Areas Where Found.
Candidate Searching Parameters Section Use this parameter section to set resume properties that affect:
• How long saved resumes remain active in the system. • The point at which guest employers must systemregister before viewing candidate resume
details.
Candidate Searching Parameters Section
Item System(s) Description
Candidate Searching Parameters Section
Number of days until a resume becomes inactive by a search
VOS, VLMI Select the number of days candidate resumes remain active. Employers may only retrieve active resumes.
Resume searching behavior
VOS, VLMI Select the appropriate point at which guest employers must systemregister in order to view details of candidate resumes.
System Settings
V8.0 R2 – 9/2006 11 VOS/VLMI System Administrator Guide
Database Parameters Section Use this parameter section to establish settings that affect database behavior and communications protocol.
Database Parameters Section
Item System(s) Description
Database Parameters Section
The from address used for emails generated from the database server.
VOS, VLMI Type the “from” email address on the email server that is responsible for generating email alerts. This is a security protocol for clients that host the system.
The name of the jobbanks database used by this system.
VOS, VLMI Type the name of the database that maintains job orders for the system.
The SMTP server address used by the database server to send emails.
VOS, VLMI Type the SMTP (Simple Mail Transfer Protocol) server address if email exchange within your system is enabled.
Employer Parameters Section Use this parameter to control the verification process for employer system registration.
Employer Parameters Section
System Settings
V8.0 R2 – 9/2006 12 VOS/VLMI System Administrator Guide
Item System(s) Description
Employer Parameters Section
Employer verification switch this option to On if you would like employ ers to be verified before posting job orders
VOS, VLMI Select whether selfregistered employers must first be verified by staff before posting job orders and conducting candidate resume searches (On=Yes, Off=No).
Employer verification preverified employers have ability to post jobs (This setting overrides the employer verification option)
VOS, VLMI Select whether staffregistered employers must first be verified by staff before posting job orders and conducting candidate resume searches (On=Yes, Off=No).
Employer auto verification enable the auto verification of newly registered employers
VOS, VLMI Select whether the system, not a staff member, will automatically enable a newly registered employer’s access rights to post job orders and conduct candidate resume searches (On=Yes, Off=No).
Employer auto verifica tion number of days until system automa tically verifies newly registered employers
VOS, VLMI Select the number of days following employer registration the system will automatically enable a newly registered employer’s access rights to post job orders and conduct candidate resume searches (1–5 days; Not Enabled if previous item=No).
Individual Parameters Section Use this parameter to set the maximum number of resumes and employer letters each individual user may save. Individuals select the Job Seeker Services component to access these tools in the system.
Individual Parameters Section
Item System(s) Description
Individual Parameters Section
Maximum number of letter records that can be stored per individual
VOS, VLMI Select the default limit for employer letters (any combination of cover, followup, or acceptance letters) the system maintains for each individual.
Maximum number of resume records that can be stored per individual
VOS, VLMI Select the default limit for saved resumes the system maintains for each individual.
System Settings
V8.0 R2 – 9/2006 13 VOS/VLMI System Administrator Guide
Job Order Parameters Section Use this parameter to set defaults within the system’s Create New Job Order screen.
Job Order Parameters Section
Item System(s) Description
Job Order Parameters Section
Default status when a job order is created
VOS, VLMI Whether staff or employercreated, record the preexisting job order status using one of the following codes: 1 = Hold till employer is verified (Inactive) 2 = Employer access revoked (Inactive) O = Open C = Closed E = Marked for Deletion H = Hold I = Released from Hold or Closed P = Placed (Inactive) R = Fully Referred (Inactive) V = Veteran Hold (Inactive) X = Expired (Inactive)
Job orders require veteran preference
VOS, VLMI Click On if the system must reserve all new job orders for veterans only. Business rules will define veteran’s preference duration
Number of days for a job order to be followed up on (sets the default job order follow up date)
VOS, VLMI Select this default value as it will appear on the Add Job Order screen. This value represents a goal date for staff to manage outstanding referral results.
Number of days until job order is closed (sets the default close date)
VOS, VLMI Select the appropriate number of days following job order creation after which the system resets the job order status to “Closed.”
Job Search Parameters Section Use this parameter to manage job search capabilities in the system.
System Settings
V8.0 R2 – 9/2006 14 VOS/VLMI System Administrator Guide
Job Search Parameters Section
Item System(s) Description
Job Search Parameters Section
External job links available
VOS, VLMI Click On to allow job seekers to visit job sites outside of the system.
Hide Employer Name on job details before user clicks on apply
VOS, VLMI Click On to prevent the employer (company) name from displaying on the job order match results screen.
Individual job seeker message English
VOS, VLMI Type the systemgenerated message that appears in English when the Virtual Recruiter (job alert) has located at least one job that matches the individual’s search criteria.
Individual job seeker message Spanish
VOS, VLMI Type the systemgenerated message that appears in Spanish when the Virtual Recruiter (job alert) has located at least one job that matches the individual’s search criteria.
Job searching / applying behavior
VOS, VLMI Select the appropriate time at which guest individuals must systemregister in order to view job order details.
Job searching by employer
VOS, VLMI Not in use.
The top number of records to return for job search queries.
VOS, VLMI Select the default limit of job search results displayed, regardless of the search option employed. Users will be prompted to modify their search criteria if job matches exceed this value.
System Settings
V8.0 R2 – 9/2006 15 VOS/VLMI System Administrator Guide
Virtual Recruiter Parameters Section Use this parameter to set job alert and resume alert controls for individual and employer user types.
Virtual Recruiter Parameters Section
Item System(s) Description
Virtual Recruiter Parameters Section
Maximum number of Virtual Recruiter records that can be stored per employer
VOS, VLMI Select the default limit of resume alerts each employer may save.
Maximum number of Virtual Recruiter records that can be stored per individual
VOS, VLMI Select the default limit of job alerts each individual may save.
Number of days until a Virtual Recruiter record expires
VOS, VLMI Select the default number of days before an employer’s resume alert or an individual’s job alert expires. Users may override this default expiration date.
VOS Parameters Section Use this parameter to set a minimum wage alert in the Employment History section of the Background Wizard.
VOS Parameters Section
Item System(s) Description
VOS Parameters Section
Minimum hourly wage (applied in the employ ment history section of the background wizard)
VOS Type the minimum wage limit, per hour, to prevent data entry errors. If a system user types an amount below this param eter setting, the system will display a popup alert indicating the typed amount falls below the established default limit.
System Settings
V8.0 R2 – 9/2006 16 VOS/VLMI System Administrator Guide
Administer Event Calendar Click the Administer Event Calendar link to add, edit, or delete events scheduled for a onestop center. Events managed here within the Admin system may be viewed by users in the VOS system. To access this option, employ one of the following methods:
• On the navigation menu, click System Settings4Administer Event Calendar. • On the System Settings Options screen, click Administer Event Calendar.
Note: Your system may not offer the Administer Event Calendar component.
The following figure displays a sample Event Calendar screen:
Event Calendar Screen
You can perform the following tasks from this screen:
• To view existing events, select the event type, month, and year from the dropdown lists. You may also use the navigation arrows by:
♦ Clicking to display future months and to display previous months
♦ Clicking to display future years and to display previous years. • Doubleclick the actual calendar date to add, edit, or delete an event or multiple events for that
date. To create a new event, click Add Event. The following figure displays a sample Event screen:
System Settings
V8.0 R2 – 9/2006 17 VOS/VLMI System Administrator Guide
Event Screen
To add or modify an event, perform the following steps: Step Action
1 Type the desired date. 2 Type the desired start time. 3 Select AM or PM. 4 Select the desired event type. 5 Type an event title. 6 Type an event description. 7 Click Save Event.
To delete an existing event, singleclick the desired calendar entry to access the Edit Event screen and click the Delete button.
System Settings
V8.0 R2 – 9/2006 18 VOS/VLMI System Administrator Guide
[This page intentionally left blank.]
V8.0 R2 – 9/2006 19 VOS/VLMI System Administrator Guide
3: Staff Administration Note: Depending on your Admin System deployment, the appearance and functions may look different. Some Administrative Service options may not be included. Please refer to your client administrator should you have any questions.
The Staff Administration option allows you to manage Virtual OneStop staff account information. To access this option, employ one of the following methods:
• On the navigation menu, click Staff Administration. • On the Directory of Administrative Services screen, click Staff Administration.
The Virtual OneStop Admin system displays a screen similar to the one below.
Staff Administration Options Screen
You can select from the following options:
• Administer a Staff Account—controls modification of existing staff member accounts. • Create a Staff Account—controls the creation of new staff member accounts. For details, refer to
Create a Staff Account on page 29. • Create Privilege Groups—controls the creation of user groups whose privileges rely on
designated system accessibility. • Change Privilege Group Settings—controls the modification of existing privilege groups. • Delete Privilege Groups—controls the removal of existing privilege groups.
Administer a Staff Account Click the Administer a Staff Account link to work with existing staff accounts. To access this option, employ one of the following options:
• On the navigation menu, click System Administration4Administer a Staff Account. • On the Staff Administrative Options screen, click Administer a Staff Account.
Staff Administration
V8.0 R2 – 9/2006 20 VOS/VLMI System Administrator Guide
The Admin system displays a search form. Enter the appropriate search criteria to find the name(s) or group you want to manage. You may search by user name, last name, group, location number, or station desk. For example, if you are searching for all staff members with the last name “Smith”, type smith in the last name field. Enter or select criteria for one or more fields and click the Find Staff Member button. The following figure displays a sample Staff Account Search screen:
Staff Account Search Screen
Based on the search criteria you entered, VOS Admin displays a list of accounts that match your criteria.
Note: Local administrators may only access staff accounts from their LWIA.
The following figure displays a sample Staff Member Search List screen:
Staff Administration
V8.0 R2 – 9/2006 21 VOS/VLMI System Administrator Guide
Staff Member Search List Screen
On this page, you can perform the following functions:
• To sort the returned list, click the column heading by which to sort. • To access the desired list page:
♦ Use the navigational toolbar by clicking the appropriate jump link. ♦ Type the desired page number in the Enter page number box and click Go.
• To conduct a new search, click Change Search Criteria. • To deactivate a staff account, click the desired Inactivate link. • To add a staff account, click the Add a new Staff Member link. Refer to “Create a Staff Account”
on page 29 for details. • To work with a specific account, click the desired Username link. A screen similar to the
following figure appears.
Staff Administration
V8.0 R2 – 9/2006 22 VOS/VLMI System Administrator Guide
Existing Staff Account Screen – Part 1
Controls staff access to programs within the Staff Referrals to Providers option in VOS (Case Management Profile>Activities Tab).
Staff Administration
V8.0 R2 – 9/2006 23 VOS/VLMI System Administrator Guide
Existing Staff Account Screen – Part 2
Staff Administration
V8.0 R2 – 9/2006 24 VOS/VLMI System Administrator Guide
To complete each section—thus modifying the selected staff member’s access privileges—select the desired value from the dropdown lists. When complete, click Save Changes. For assistance in modifying staff account information, refer to the following topics that address the corresponding screen sections. The following list describes the available access levels and their meanings:
• Yes—allows the staff member to perform the associated task. • No—prevents the staff member from performing the associated task. • Full—allows the staff member full access rights to the associated task. • View—allows the staff member viewonly privileges for the associated task. • None—allows the staff member no access to the associated task. • Local Admin—allows the staff member full access rights to manage information for individuals or
employers within the same LWIA (local workforce investment area), and in some instances, includes the ability to change lockeddown data elements. Developers at Geographic Solutions establish these security rights when they program your system according to your design specifications. Refer to your system specifications to identify specific administrative field level access rights.
• State Admin—allows the staff member full access rights to manage information for individuals or employers, regardless of their LWIA affiliation. This includes the ability to change lockeddown data elements. The State Admin level is the highest access level for staff members. Developers at Geographic Solutions establish these security rights when they program your system according to your design specifications. Refer to your system specifications to identify specific administrative field level access rights.
User Information Section To modify existing staff account information—with the exception of the username—click and drag the mouse over the desired text to highlight it. Type the appropriate changes. If applicable, select the office location(s) from checkboxes or available dropdown lists. Note: Items marked with a red asterisk (*) require information.
Access Privileges—Access Group Section Select the appropriate privilege group to which this staff member belongs. You can stop here, offering this staff member the system access rights associated with the selected privilege group. Otherwise, you can continue modifying the remaining access areas. For information on creating privilege groups, refer to the Create Privilege Groups topic.
Access Privileges—Individual Activities Tab Section This section provides staff access to the Activities tab within an individual’s Case Management Profile.
• Alternate Contacts—can this staff member manage alternate contact information? (F/N/V) • Employment History—can this staff member manage an individual’s employment information?
(F/N/V) • Job Referral—can this staff member manage an individual’s job referral information? (F/N/V) • Provider Referral—can this staff member manage provider referral information for an individual?
(F/N/V) • Service Plan—can this staff member manage WagnerPeyser activity services for an individual?
(F/N/V)
Staff Administration
V8.0 R2 – 9/2006 25 VOS/VLMI System Administrator Guide
Access Privileges—Individual Assessment Tab Section This section provides staff access to the Assessment tab within an individual’s Case Management Profile.
• Aptitude Assessment—can this staff member use the Aptitude Assessment tool? (F/LA/N/SA/V) • Basic Skills Assessment—can this staff member use the basic skills assessment tool? (F/N/V) • Objective Assessment—can this staff member use the objective assessment tool? (F/LA/N/SA/V) • Other Assessment—can this staff member use the “other” assessment tool? (F/N/V) • WorkKeys Assessment—can this staff member use the WorkKeys assessment tool? (F/N/V)
Access Privileges—Case Assignment Section This section controls the ability of case managers to perform various functions associated with case assignment. Virtual OneStop lists the following key responsibilities reserved for these users:
• Batch Individual Case Assignment—not in use. • Case ReAssignment—can this member remove clients from a case manager’s caseload and
assign them to another case manager? (Y/N) • Case Temporary Assignment—can this member remove clients from a case manager’s caseload
and temporarily assign then to another? (Y/N) • Employer Case Assignment—can this staff member assign employers to case managers? (Y/N) • Individual Case Assignment—can this member assign an individual to a case manager or group?
(Y/N) • Manage Groups—can this member create and administer case management groups?
(F/LA/N/SA/V) • Staff Group Assignment—can this member assign staff (case managers) to case management
groups? (F/LA/N/SA/V) Note: Only staff with local or state administrator privileges can perform the Manage Groups and Staff
Group Assignment functions.
Access Privileges—Case Notes Tab Section This section provides staff access to the Case Notes tab within an individual’s Case Management Profile.
• Individual Case Notes—can this staff member manage an individual’s case notes? (F/LA/N/SA/V)
Access Privileges—Employer Case Management Section This section provides staff access to an employer’s Case Management Profile.
• Case Notes—can this staff member manage an employer’s case notes? (F/LA/N/SA/V) • Employer Activities—can this staff member manage WagnerPeyser activity services for an
employer? (F/N/V)
Access Privileges—Employer File Folders Section The folders listed in this section refer to collective information the system maintains on an employer’s behalf. You may find these folders in an employer’s account by clicking the My Profile option in the left navigation menu. All access levels employ a Yes/No format.
Access Privileges—Manage Employers Section This section lists three privileges within the Manage Employers module:
Staff Administration
V8.0 R2 – 9/2006 26 VOS/VLMI System Administrator Guide
• Create an Employer Account—can this staff member create a VOS account for an employer? (Y/N)
• Employer System Access Rights—can this staff member control an employer’s ability to post job orders and search for candidate resumes in Virtual OneStop? (F/N/V)
• Work with an Employer—can this staff member assist an employer? (Y/N)
Access Privileges—Individual File Folders Section The folders listed in this section refer to collective information the system maintains on an individual’s behalf. You may find these folders in an individual’s account by clicking the My Profile option in the left navigation menu. All access levels employ a Yes/No format.
Access Privileges—Individual Fund Tracking Section The Individual Fund Tracking section applies only to VOS deployments that include this function. This section controls the ability of case managers, fiscal managers, and other appointed personnel to perform various functions associated with fund management. (General staff members often do not perform fund tracking roles). This section lists key components to the Manage Individual Fund Tracking (IFT) module within VOS:
• Account Limits—can this staff member manage default account limits? (F/LA/N/SA/V) • Fund Reallocation—IFT Advanced only—can this staff member move monies from one category
to another within the same fund stream? (Y/N) • Fund Redistribution—IFT Advanced only—can this staff member move monies from one fund
stream to another? (Y/N) • Manage Client Vouchers—can this staff member manager vouchers made payable to the client?
(F/LA/N/SA/V) • Manage Contracts—IFT Advanced only—can this staff member manage contracts for service and
program providers? (F/LA/N/SA/V) • Manage Funds—IFT Advanced only—can this staff member manage the Fund Management
component within IFT? (F/LA/N/SA/V) • Manage IFT Admin—can this staff member manage the Administrative component within IFT?
(F/LA/N/SA/V) • Manage Individual Limits—can this staff member set account limits for individuals?
(F/LA/N/SA/V) • Manage Providers—can this staff member manage service and program providers?
(F/LA/N/SA/V) • Manage Tracking—can this staff member manage training referrals and vouchers, as well as
support service vouchers? (F/LA/N/SA/V) • Manage Voucher Approval—can this staff member use this feature to verify and approve a
pending training or support service voucher? (F/LA/N/SA/V)
Access Privileges—Manage Individuals Section This section lists key responsibilities staff typically perform within the Manage Individuals module of Virtual OneStop:
• Assign Individual Cases to Staff Members—can this staff member access the case assignment component within Manage Individuals? (Y/N)
Note: This must be set to Yes in order to perform the case assignment tasks described above.
Staff Administration
V8.0 R2 – 9/2006 27 VOS/VLMI System Administrator Guide
• Create an Individual Account—can this staff member create a VOS account for an individual user? (Y/N)
• Edit Date of Birth—can this staff member modify an individual’s date of birth (DOB)? (Y/N) • Edit SSN—can this staff member modify and individual’s Social Security Number (SSN)? (Y/N) • Manage Individual Services—can this staff member manage an individual’s service plan
information? (Y/N) • Manage Veterans—can this staff member access and manage account information for veterans?
(Y/N) • Scheduled Services—can this staff member generate office lists of individuals scheduled to
appear for service plan activities? (Y/N) • View Case Load—can this staff member view a case manager’s case load? (Y/N) • Work with Individuals—can this staff member assist individuals? (Y/N)
Access Privileges—Manage Job Orders Section This section lists key responsibilities staff typically perform to manage employer job orders:
• Job Order Followup Referrals—can this staff member access this Manage Job Order component? (Y/N)
• Job Order Mass Referrals—can this staff member access this Manage Job Order component? (Y/N)
• Job Order Referrals Requiring Staff Review—can this staff member access this Manage Job Order component? (Y/N)
• Job Order Referral Results—can this staff member access this Manage Job Order component? (Y/N)
• Job Order Verification—can this staff member access this Manage Job Order component? (F/LA/N/SA/V)
• Job Order Vet Rep—can this staff member manage job orders held for US veterans? (Y/N) • Job Orders by Occupation—not in use. (Y/N)
Access Privileges—Manage Appointments/Messages Section The items listed in this section allow staff members to create, modify, and delete appointments, messages, and correspondence form letters. Access levels employ a Yes/No format.
Access Privileges—Manage Profiling Section This section lists key responsibilities staff typically perform to manage unemployment insurance (UI) for unemployed or displaced workers:
• Profiling Orientation Letter—can this staff member generate letters to individuals selected for profiling services? (Y/N)
• UI Data Maintenance—can this staff member access information for the number of UI claims processed weekly? (Y/N)
Access Privileges—Staff Service Reports Section This section lists report categories available to staff. All—with the exception of WIA Quarterly reports— employ a Yes/No format.
Note: Staff Service Report options may vary.
Staff Administration
V8.0 R2 – 9/2006 28 VOS/VLMI System Administrator Guide
• Activity, Referral Reports—can this staff member generate job referral reports? (Y/N) • Activity, Service Reports—can this staff member generate service plan reports? (Y/N) • Background Information Reports—can this staff member generate reports from an individual’s
background info entered in VOS? (Y/N) • Case Management, Case Load Reports—can this staff member generate case management
reports under the Case Load heading? (Y/N) • Case Management, Predictive Reports—can this staff member generate case management
reports under the Predictive heading? (Y/N) • Case Management, Staff Referral Reports—can this staff member generate case management
reports under the Staff Referral heading? (Y/N) • Enrolled Individual Reports—can this staff member generate reports for enrolled individuals?
(Y/N) • ETA 9002 Reports—can this staff member generate ES 9002 Reports? (Y/N) • IFT, Funding Reports—can this staff member generate IFT reports that illustrate account limits,
fund streams balances, and provider expenditures? (Y/N) • IFT, Provider Reports—can this staff member generate IFT reports that provide institution
information, such as course offered? (Y/N) • Job Order Reports—can this staff member generate Job Orders reports? (Y/N) • Registered Employer Reports—can this staff member generate Registered Employer reports?
(Y/N) • Registered Individual Reports—can this staff member generate reports for registered individuals?
(Y/N) • Resume Reports—can this staff member generate reports based on resumes? (Y/N) • Scancard Reports—can this staff member generate scan card event reports? (Y/N) • Services Provided Individual Reports—can this staff member generate Individual reports based
on services received? (Y/N) • Services to Employer Reports—can this staff member generate Employer reports based on
services received? (Y/N) • Survey Reports—can this staff member generate Survey reports for registered individuals and
employers? (Y/N) • Tracking Reports—can this staff member generate Tracking reports? (Y/N) • WIA Annual Reports—can this staff member generate WIA Annual reports on the federal report
level? (Y/N) • WIA Quarterly Reports—can this staff member generate WIA Quarterly reports on the federal
report level? (Y/N/SA)
Access Privileges—Manage Satisfaction Surveys Section This section lists satisfaction survey report categories available to staff. Access levels employ a Yes/No format.
• Employer Satisfaction Survey—can this staff member generate Employer Satisfaction survey results? (Y/N)
• WIA Customer Satisfaction Survey—can this staff member generate a report with WIA Customer Satisfaction survey results? (Y/N)
• WP Customer Satisfaction Survey—can this staff member generate a report with WagnerPeyser (WP) Customer Satisfaction survey results? (Y/N)
Staff Administration
V8.0 R2 – 9/2006 29 VOS/VLMI System Administrator Guide
Access Privileges—Individual Programs Tab Section The items listed in this section represent program information maintained within the Programs Tab of an individual’s Case Management Profile.
• Common Intake—can this staff member manage common intake information for an individual? (F/LA/N/SA/V).
• Generic Program—can this staff member manage generic program information for an individual? (F/LA/N/SA/V).
• Individual Employment Plan—can this staff member manage Individual Employment Plan (IEP) information for an individual? (F/LA/N/SA/V).
• Objective Assessment Entry—can this staff member manage objective assessment information for an individual? (F/LA/N/SA/V).
• Unemployment Services—can this staff member manage this specialized program information for an individual? (F/LA/N/SA/V).
• WagnerPeyser—can this staff member manage an individual’s WagnerPeyser (WP) service plan? (F/LA/N/SA/V).
• WelfaretoWork—can this staff member manage WelfaretoWork (WtW) information for an individual? (F/LA/N/SA/V)
• Workforce Investment Act—can this staff member manage Workforce Investment Act (WIA) information for an individual? (F/LA/N/SA/V)
• Youth Services—can this staff member manage this specialized program information for an individual? (F/LA/N/SA/V).
To secure your edits, click the Save Changes button.
Create a Staff Account The tasks you perform to create a new staff account are the same to administer a staff account (previous topic). The only difference involves managing User Information data. For details, refer to the topic that follows.
Staff User Information Use this section of the Staff Account screen to record the following staff member information:
• User ID and password
• First and last name
• Contact information
• LWIA and/or ES office affiliation
• Account status
The following figure displays a sample User Information section of a Staff Account screen:
Staff Administration
V8.0 R2 – 9/2006 30 VOS/VLMI System Administrator Guide
User Information Section—Staff Account Screen
Type the appropriate user information to complete the upper portion of the staff member’s profile. Items marked with a red asterisk (*) are mandatory. To designate the LWIA (local workforce investment area) region to which this staff member belongs, make a selection from the dropdown list (a sample of which follows).
Controls staff access to programs within the Staff Referrals to Providers option in VOS (Case Management Profile>Activities Tab).
Staff Administration
V8.0 R2 – 9/2006 31 VOS/VLMI System Administrator Guide
Sample LWIA Region List
In this example, VOS Admin displays three types of regions to which staff members may belong, and only present these options to State Administrators: State Staff (formerly State Administrator)—staff members in this group work in an administrative capacity—usually at the State Capitol for program Departments—overseeing program implementation rather than providing direct program assistance. State staff generally do not have office location designations, and most do not add participant records. According to system access privileges, some may modify client records in a “State Administrator” capacity. Local Staff—staff members in this group are involved in programs that are limited to a particular locale (for example, Central area). To complete this selection, you will be required to identify the appropriate WIA onestop office(s) within the selected LWIA this staff member may operate within, and/or their ES office and station ID.
Note: Local administrators will only see their LWIA. Statewide Providers—these group members may not be onestop staff members, but WIA Statewide service providers granted access to Virtual OneStop. The system uses an office designation to define each specific, statewide contracted service provider. After selecting “Statewide Provider,” you will be required to select the appropriate office to which this service provider belongs. The Staff Account screen is an example of a datadriven form — the page will “refresh” based on the LWIA region you select. For details of this dynamic form (in all three profile types), see the following topics.
State Staff Profile When you select State Staff (or State Administrator) as the desired LWIA region for a staff member, the page will refresh and display information for your state that is similar to the following figure.
Note: State staff members rarely complete office affiliation information. Your Admin system may require you to select a WIA office or ES office and station ID number.
For assistance completing the rest of the form, refer to the previous topic, Administer a Staff Account.
Local Staff Profile When you select a specific locale as the desired LWIA region for a staff member, the page will refresh and display information for your region that is similar to the following figure. Complete this staff member’s user information by clicking the appropriate WIA onestop office check boxes this staff member may work within.
Staff Administration
V8.0 R2 – 9/2006 32 VOS/VLMI System Administrator Guide
WIA OneStop Office Dropdown List
Note: Virtual OneStop will filter staff selections in WIA forms based on the offices recorded, so be sure to include all offices for which the staff user may add and edit WIA records.
You may also select the appropriate ES office and type the staff member’s ES Station ID, if applicable. The following figure displays an ES office dropdown list for a particular locale.
ES Office Dropdown List
For assistance completing the rest of the form, refer to the previous topic, Administer a Staff Account.
Statewide Provider Profile When you select Statewide Provider as the desired LWIA region for a staff member, the page will refresh and display information similar to the following figure.
Statewide Provider Profile
Depending on your Admin system deployment, you may see a list of WIA provider offices to which statewide providers may belong. Accordingly, click the appropriate onestop office check box(es) this person may work within. Statewide providers rarely belong to an ES office.
Note: Admin system business rule requirements may vary.
For information about creating a staff account, see the previous topic, Administer a Staff Account.
Staff Administration
V8.0 R2 – 9/2006 33 VOS/VLMI System Administrator Guide
Create Privilege Groups This option allows you to create user groups with customized access levels. Staff members you add to these groups share the same privileges with fellow members. To access this feature, employ one of the following methods:
• On the navigation menu, click Staff Administration4Create Privilege Groups. • On the Staff Administration Options screen, click Create Privilege Groups.
The following figure displays a sample Create Privilege Groups screen:
Create Privilege Groups Screen
Staff Administration
V8.0 R2 – 9/2006 34 VOS/VLMI System Administrator Guide
Complete this form the same way you did when administering and creating staff accounts (previous two topics). For assistance, follow the section details below. The following list describes the available access levels and their meanings:
• Yes—allows the staff member to perform the associated task. • No—prevents the staff member from performing the associated task. • Full—allows the staff member full access rights to the associated task. • View—allows the staff member viewonly privileges for the associated task. • None—allows the staff member no access to the associated task. • Local Admin—allows the staff member full access rights to manage information for individuals or
employers within the same LWIA (local workforce investment area), and in some instances, includes the ability to change lockeddown data elements. Developers at Geographic Solutions establish these security rights when they program your system according to your design specifications. Refer to your system specifications to identify specific administrative field level access rights.
• State Admin—allows the staff member full access rights to manage information for individuals or employers, regardless of their LWIA affiliation. This includes the ability to change lockeddown data elements. The State Admin level is the highest access level for staff members. Developers at Geographic Solutions establish these security rights when they program your system according to your design specifications. Refer to your system specifications to identify specific administrative field level access rights.
Privilege Group Name Section Type the desired group name.
Access Privileges—Individual Activities Tab Section This section provides staff access to the Activities tab within an individual’s Case Management Profile.
• Alternate Contacts—can this staff member manage alternate contact information? (F/N/V) • Employment History—can this staff member manage an individual’s employment information?
(F/N/V) • Job Referral—can this staff member manage an individual’s job referral information? (F/N/V) • Provider Referral—can this staff member manage provider referral information for an individual?
(F/N/V) • Service Plan—can this staff member manage WagnerPeyser activity services for an individual?
(F/N/V)
Access Privileges—Individual Assessment Tab Section This section provides staff access to the Assessment tab within an individual’s Case Management Profile.
• Aptitude Assessment—can this staff member use the Aptitude Assessment tool? (F/LA/N/SA/V) • Basic Skills Assessment—can this staff member use the basic skills assessment tool? (F/N/V) • Objective Assessment—can this staff member use the objective assessment tool? (F/LA/N/SA/V) • Other Assessment—can this staff member use the “other” assessment tool? (F/N/V) • WorkKeys Assessment—can this staff member use the WorkKeys assessment tool? (F/N/V)
Staff Administration
V8.0 R2 – 9/2006 35 VOS/VLMI System Administrator Guide
Access Privileges—Case Assignment Section This section controls the ability of case managers to perform various functions associated with case assignment. Virtual OneStop lists the following key responsibilities reserved for these users:
• Batch Individual Case Assignment—not in use. • Case ReAssignment—can this member remove clients from a case manager’s caseload and
assign them to another case manager? (Y/N) • Case Temporary Assignment—can this member remove clients from a case manager’s caseload
and temporarily assign then to another? (Y/N) • Employer Case Assignment—can this staff member assign employers to case managers? (Y/N) • Individual Case Assignment—can this member assign an individual to a case manager or group?
(Y/N) • Manage Groups—can this member create and administer case management groups?
(F/LA/N/SA/V) • Staff Group Assignment—can this member assign staff (case managers) to case management
groups? (F/LA/N/SA/V) Note: Only staff with local or state administrator privileges can perform the Manage Groups and Staff
Group Assignment functions.
Access Privileges—Case Notes Tab Section This section provides staff access to the Case Notes tab within an individual’s Case Management Profile.
• Individual Case Notes—can this staff member manage an individual’s case notes? (F/LA/N/SA/V)
Access Privileges—Employer Case Management Section This section provides staff access to an employer’s Case Management Profile.
• Case Notes—can this staff member manage an employer’s case notes? (F/LA/N/SA/V) • Employer Activities—can this staff member manage WagnerPeyser activity services for an
employer? (F/N/V)
Access Privileges—Employer File Folders Section The folders listed in this section refer to collective information the system maintains on an employer’s behalf. You may find these folders in an employer’s account by clicking the My Profile option in the left navigation menu. All access levels employ a Yes/No format.
Access Privileges—Manage Employers Section This section lists three privileges within the Manage Employers module:
• Create an Employer Account—can this staff member create a VOS account for an employer? (Y/N)
• Employer System Access Rights—can this staff member control an employer’s ability to post job orders and search for candidate resumes in Virtual OneStop? (F/N/V)
• Work with an Employer—can this staff member assist an employer? (Y/N)
Staff Administration
V8.0 R2 – 9/2006 36 VOS/VLMI System Administrator Guide
Access Privileges—Individual File Folders Section The folders listed in this section refer to collective information the system maintains on an individual’s behalf. You may find these folders in an individual’s account by clicking the My Profile option in the left navigation menu. All access levels employ a Yes/No format.
Access Privileges—Individual Fund Tracking Section The Individual Fund Tracking section applies only to VOS deployments that include this function. This section controls the ability of case managers, fiscal managers, and other appointed personnel to perform various functions associated with fund management. (General staff members often do not perform fund tracking roles). This section lists key components to the Manage Individual Fund Tracking (IFT) module within VOS:
• Account Limits—can this staff member manage default account limits? (F/LA/N/SA/V) • Fund Reallocation—IFT Advanced only—can this staff member move monies from one category
to another within the same fund stream? (Y/N) • Fund Redistribution—IFT Advanced only—can this staff member move monies from one fund
stream to another? (Y/N) • Manage Client Vouchers—can this staff member manager vouchers made payable to the client?
(F/LA/N/SA/V) • Manage Contracts—IFT Advanced only—can this staff member manage contracts for service and
program providers? (F/LA/N/SA/V) • Manage Funds—IFT Advanced only—can this staff member manage the Fund Management
component within IFT? (F/LA/N/SA/V) • Manage IFT Admin—can this staff member manage the Administrative component within IFT?
(F/LA/N/SA/V) • Manage Individual Limits—can this staff member set account limits for individuals?
(F/LA/N/SA/V) • Manage Providers—can this staff member manage service and program providers?
(F/LA/N/SA/V) • Manage Tracking—can this staff member manage training referrals and vouchers, as well as
support service vouchers? (F/LA/N/SA/V) • Manage Voucher Approval—can this staff member use this feature to verify and approve a
pending training or support service voucher? (F/LA/N/SA/V)
Access Privileges—Manage Individuals Section This section lists key responsibilities staff typically perform within the Manage Individuals module of Virtual OneStop:
• Assign Individual Cases to Staff Members—can this staff member access the case assignment component within Manage Individuals? (Y/N)
Note: This must be set to Yes in order to perform the case assignment tasks described above.
• Create an Individual Account—can this staff member create a VOS account for an individual user? (Y/N)
• Edit Date of Birth—can this staff member modify an individual’s date of birth (DOB)? (Y/N) • Edit SSN—can this staff member modify and individual’s Social Security Number (SSN)? (Y/N) • Manage Individual Services—can this staff member manage an individual’s service plan
information? (Y/N)
Staff Administration
V8.0 R2 – 9/2006 37 VOS/VLMI System Administrator Guide
• Manage Veterans—can this staff member access and manage account information for veterans? (Y/N)
• Scheduled Services—can this staff member generate office lists of individuals scheduled to appear for service plan activities? (Y/N)
• View Case Load—can this staff member view a case manager’s case load? (Y/N) • Work with Individuals—can this staff member assist individuals? (Y/N)
Access Privileges—Manage Job Orders Section This section lists key responsibilities staff typically perform to manage employer job orders:
• Job Order Followup Referrals—can this staff member access this Manage Job Order component? (Y/N)
• Job Order Mass Referrals—can this staff member access this Manage Job Order component? (Y/N)
• Job Order Referrals Requiring Staff Review—can this staff member access this Manage Job Order component? (Y/N)
• Job Order Referral Results—can this staff member access this Manage Job Order component? (Y/N)
• Job Order Verification—can this staff member access this Manage Job Order component? (F/LA/N/SA/V)
• Job Order Vet Rep—can this staff member manage job orders held for US veterans? (Y/N) • Job Orders by Occupation—not in use. (Y/N)
Access Privileges—Manage Appointments/Messages Section The items listed in this section allow staff members to create, modify, and delete appointments, messages, and correspondence form letters. Access levels employ a Yes/No format.
Access Privileges—Manage Profiling Section This section lists key responsibilities staff typically perform to manage unemployment insurance (UI) for unemployed or displaced workers:
• Profiling Orientation Letter—can this staff member generate letters to individuals selected for profiling services? (Y/N)
• UI Data Maintenance—can this staff member access information for the number of UI claims processed weekly? (Y/N)
Access Privileges—Staff Service Reports Section This section lists report categories available to staff. All—with the exception of WIA Quarterly reports— employ a Yes/No format.
Note: Staff Service Report options may vary.
• Activity, Referral Reports—can this staff member generate job referral reports? (Y/N) • Activity, Service Reports—can this staff member generate service plan reports? (Y/N) • Background Information Reports—can this staff member generate reports from an individual’s
background info entered in VOS? (Y/N) • Case Management, Case Load Reports—can this staff member generate case management
reports under the Case Load heading? (Y/N)
Staff Administration
V8.0 R2 – 9/2006 38 VOS/VLMI System Administrator Guide
• Case Management, Predictive Reports—can this staff member generate case management reports under the Predictive heading? (Y/N)
• Case Management, Staff Referral Reports—can this staff member generate case management reports under the Staff Referral heading? (Y/N)
• Enrolled Individual Reports—can this staff member generate reports for enrolled individuals? (Y/N)
• ETA 9002 Reports—can this staff member generate ES 9002 Reports? (Y/N) • IFT, Funding Reports—can this staff member generate IFT reports that illustrate account limits,
fund streams balances, and provider expenditures? (Y/N) • IFT, Provider Reports—can this staff member generate IFT reports that provide institution
information, such as course offered? (Y/N) • Job Order Reports—can this staff member generate Job Orders reports? (Y/N) • Registered Employer Reports—can this staff member generate Registered Employer reports?
(Y/N) • Registered Individual Reports—can this staff member generate reports for registered individuals?
(Y/N) • Resume Reports—can this staff member generate reports based on resumes? (Y/N) • Scancard Reports—can this staff member generate scan card event reports? (Y/N) • Services Provided Individual Reports—can this staff member generate Individual reports based
on services received? (Y/N) • Services to Employer Reports—can this staff member generate Employer reports based on
services received? (Y/N) • Survey Reports—can this staff member generate Survey reports for registered individuals and
employers? (Y/N) • Tracking Reports—can this staff member generate Tracking reports? (Y/N) • WIA Annual Reports—can this staff member generate WIA Annual reports on the federal report
level? (Y/N) • WIA Quarterly Reports—can this staff member generate WIA Quarterly reports on the federal
report level? (Y/N/SA)
Access Privileges—Manage Satisfaction Surveys Section This section lists satisfaction survey report categories available to staff. Access levels employ a Yes/No format.
• Employer Satisfaction Survey—can this staff member generate Employer Satisfaction survey results? (Y/N)
• WIA Customer Satisfaction Survey—can this staff member generate a report with WIA Customer Satisfaction survey results? (Y/N)
• WP Customer Satisfaction Survey—can this staff member generate a report with Wagner Peyser (WP) Customer Satisfaction survey results? (Y/N)
Access Privileges—Individual Programs Tab Section The items listed in this section represent program information maintained within the Programs Tab of an individual’s Case Management Profile.
• Common Intake—can this staff member manage common intake information for an individual? (F/LA/N/SA/V).
Staff Administration
V8.0 R2 – 9/2006 39 VOS/VLMI System Administrator Guide
• Generic Program—can this staff member manage generic program information for an individual? (F/LA/N/SA/V).
• Individual Employment Plan—can this staff member manage Individual Employment Plan (IEP) information for an individual? (F/LA/N/SA/V).
• Objective Assessment Entry—can this staff member manage objective assessment information for an individual? (F/LA/N/SA/V).
• Unemployment Services—can this staff member manage this specialized program information for an individual? (F/LA/N/SA/V).
• WagnerPeyser—can this staff member manage an individual’s WagnerPeyser (WP) service plan? (F/LA/N/SA/V).
• WelfaretoWork—can this staff member manage WelfaretoWork (WtW) information for an individual? (F/LA/N/SA/V)
• Workforce Investment Act—can this staff member manage Workforce Investment Act (WIA) information for an individual? (F/LA/N/SA/V)
• Youth Services—can this staff member manage this specialized program information for an individual? (F/LA/N/SA/V).
To secure all your edits, click Create.
Change Privilege Group Settings Virtual OneStop allows you to modify privileges for established groups within the system. To access this option, employ one of the following methods:
• On the navigation menu, click Staff Administration4Change Privilege Group Settings. • On the Staff Administration Options screen, click Change Privilege Group Settings.
Perform the same tasks outlined in the previous topic, Create Privilege Groups. To begin, select the desired user group from the Access Group dropdown list. Then, begin modifying select list items (using section information from the previous topic for assistance). When complete, click Save Changes.
Delete Privilege Groups In addition to creating and modifying privilege groups, Virtual OneStop also allows you to delete them. To access this option, employ one of the following methods:
• On the navigation menu, click Staff Administration4Delete Privilege Groups. • On the Staff Administration Options screen, click Delete Privilege Groups.
The following figure displays a sample Delete Privilege Groups screen:
Delete Privilege Groups Screen
Staff Administration
V8.0 R2 – 9/2006 40 VOS/VLMI System Administrator Guide
Select the desired user group from the Group to Delete dropdown menu. Then, select a new user group from the Group to Reassign Users To dropdown menu whose privileges will replace those for the deleted group. When complete, save your changes and initiate the delete command by clicking the Delete Group button. To confirm your desired action, the Virtual OneStop Admin system displays a message similar to the one below:
Click OK to execute the delete command.
Note: Be careful when selecting which group users will be reassigned to. You may inadvertently provide far more privileges than you intended.
V8.0 R2 – 9/2006 41 VOS/VLMI System Administrator Guide
4: User Administration Use this option to manage individual, employer, and analyst account information in Virtual OneStop/Virtual LMI. To access this feature, employ one of the following methods:
• On the navigation menu, click User Administration. • On the Directory of Administrative Services screen, click User Administration.
The following figure displays a sample User Administration Options screen:
User Administration Options Screen
Select from the following options:
• Administer Individuals—select this option to manage registered individual account information, including password data and system access rights.
• Administer Employers—select this option to manage registered employer account information, including the Federal Employer ID # and system access rights.
• Administer Analysts—select this option to manage registered analyst account information, including password data, system access rights, and the ability to suppress select LMI data. (Labor Market Analysis module only.)
Reserved for labor market analysts only.
User Administration
V8.0 R2 – 9/2006 42 VOS/VLMI System Administrator Guide
Administer Individuals Use this option to manage account information for the selected individual. Employ one of the following methods to access this feature:
• On the navigation menu, click User Administration4Administer Individuals. • On the User Administration Options screen, click Administer Individuals.
When you click the Administer Individuals link, the Admin system displays a search screen to access the desired individual. The following figure displays a sample Search for an Individual User screen:
Search for an Individual User Screen
Type the username, first name, last name, or city of residence for the desired individual. If you are unsure how to spell the person’s name information, the Admin system allows partial search criteria (for example, type only the first letter of the last name) to execute a search.
Note: The more specific the search criteria you employ, the more specific the match list Admin returns.
To execute the search, click Find Individual User. The following figure displays a sample Individual User List screen:
User Administration
V8.0 R2 – 9/2006 43 VOS/VLMI System Administrator Guide
Individual User List Screen
The vague search results are based on vague search criteria. By typing “M” in the Last Name field, the system returned 4 pages of matching data. You can perform the following tasks from this screen:
• To sort the returned list, click the column heading by which to sort. • To access the desired list page:
♦ Use the navigational toolbar by clicking the appropriate jump link. ♦ Type the desired page number in the Enter page number box and click Go.
• To delete a specific user, click the corresponding Delete link. • To suspend an individual account, click the desired Archive link. • To reactivate a suspended account, click the desired Restore link. • To access a specific individual account, click the desired Username link. The Admin system
displays a screen similar to the following one.
User Administration
V8.0 R2 – 9/2006 44 VOS/VLMI System Administrator Guide
User Information Screen
Create, modify, or delete the appropriate account information for the selected individual user account. When complete, click the Save Changes button.
Archive Individual Records The Admin system allows you to archive user records. By selecting this account status, Virtual OneStop/Virtual LMI does not send the record to another physical location as the name “archive” might imply. Instead, it prevents the record from appearing in a match list when users conduct a system query. To archive an individual account, perform the steps in the previous topic, Administer Individuals, to access the Individual List screen. Locate the desired user and click the corresponding Archive link (see sample below).
The Admin system displays a screen similar to the one below.
Click Denied to prevent this individual from logging in to Virtual OneStop or Virtual LMI.
User Administration
V8.0 R2 – 9/2006 45 VOS/VLMI System Administrator Guide
Click OK to archive the selected user record. The Admin system displays a confirmation screen, a sample of which appears below.
Archived Record Confirmation Screen
Click the Return to the results page button to access the updated Individual List screen (see below).
Restore Individual Records You can reactivate archived accounts by changing the account status. To begin, perform the steps in the previous topic, Administer Individuals, to access the Individual List screen. Locate the desired user and click the corresponding Restore link (see sample above). The Admin system displays a screen similar to the one below.
Click OK to restore the selected user record. The Admin system displays a confirmation screen, similar to the following sample.
Restored Record Confirmation Screen
Click the Return to the results page button to access the updated Individual List screen (see below).
User Administration
V8.0 R2 – 9/2006 46 VOS/VLMI System Administrator Guide
Delete Individual Records The Admin system allows you to delete user records. By executing this function, Virtual OneStop/Virtual LMI permanently removes the record from its database.
Note: The delete record function is irreversible.
To delete an individual account, perform the steps in the previous topic, Administer Individuals, to access the Individual List screen. Locate the desired user and click the corresponding Delete link (see sample below).
The Admin system displays a screen similar to the one below.
This is the first of two popup alerts that allow you to cancel without deleting the record. When you click OK to proceed, the Admin system displays another screen similar to the following one:
Click OK to execute the delete function, or Cancel to exit.
Administer Employers Access this option to manage account information for the selected employer user. Use one of the following methods to access this feature:
• On the navigation menu, click User Administration4Administer Employers. • On the User Administration Options screen, click Administer Employers.
When you click the Administer Employers link, the Admin system displays a search screen to access the desired employer. The following figure displays a sample Search for an Employer screen:
User Administration
V8.0 R2 – 9/2006 47 VOS/VLMI System Administrator Guide
Search for an Employer Screen
Type the appropriate search criteria in one (or all) of these boxes, as described in the Administer Individuals topic. Click Find Employer to initiate the search. The following figure displays a sample Employer List screen:
Employer List Screen
You can perform the same tasks on this screen as those described in the Administer Individuals topic. By clicking the desired Username link, the Admin system displays a screen similar to the one on the following page:
User Administration
V8.0 R2 – 9/2006 48 VOS/VLMI System Administrator Guide
User Information Screen
Create, modify, or delete the appropriate account information for the selected employer user account. When complete, click the Save Changes button.
User Administration
V8.0 R2 – 9/2006 49 VOS/VLMI System Administrator Guide
Archive Employer Records The necessary steps to archive an employer record match those for an individual record. For details archiving an employer record, refer to the Archive Individual Records topic.
Restore Employer Records The necessary steps to restore an archived employer record match those for an individual record. For details restoring an archived employer record, refer to the Restore Individual Records topic.
Delete Employer Records The necessary steps to delete an employer record match those for an individual record. For details deleting an employer record, refer to the Delete Individual Records topic.
Administer Analysts Use this option to manage account information for the selected labor market analyst. Employ one of the following methods to access this feature:
• On the navigation menu, click User Administration4Administer Analysts. • On the User Administration Options screen, click Administer Analysts.
Note: This is included in the Labor Market Analysis module only.
When you click the Administer Analysts link, the Admin system displays a search screen to access the desired analyst record. The following figure displays a sample Search for an Analyst User screen:
Search for an Analyst User Screen
Type the username, first name, last name, or city of residence for the desired individual. If you are unsure how to spell the person’s name information, the Admin system allows partial search criteria (for example, type only the first letter of the last name) to execute a search. If you search by region, the Admin system will require you to include at least one additional search criterion. Note: The more specific the search criteria you employ, the more specific the match list Admin returns.
To execute the search, click Find Analyst User. The following figure displays a sample Analyst User List screen:
User Administration
V8.0 R2 – 9/2006 50 VOS/VLMI System Administrator Guide
Analyst User List Screen
You can perform the following tasks from this screen:
• To sort the returned list, click the column heading by which to sort. • To access the desired list page:
♦ Use the navigational toolbar by clicking the appropriate jump link. ♦ Type the desired page number in the Enter page number box and click Go.
• To delete a specific user, click the corresponding Delete link. • To suspend an analyst account, click the desired Archive link. • To reactivate a suspended account, click the desired Restore link. • To access a specific analyst account, click the desired Username link. The Admin system
displays a screen similar to the following one.
Controls whether specific LMI data will display for this analyst user.
Allows/prevents access to Virtual LMI.
Analyst User Information Screen
User Administration
V8.0 R2 – 9/2006 51 VOS/VLMI System Administrator Guide
In the User Information section of this screen, type over existing data to modify it. Click Save Changes to secure your edits. In the LMI Suppression Rules section of this screen, the administrator may select a data suppression method for select labor market data. Refer to the following table for a description of all display items, their dropdown value selections, and the path Analysts take to view the data in Virtual LMI.
Item Value Path = Labor Market Analysis>…
CES Female Employment Suppression None, Suppressed, Not Suppressed* Reserved for future use.
CES Hours and Earnings Suppression None, Suppressed, Not Suppressed Industry4Current Employment
Statistics (CES)
CES Hours Earned Suppression None, Suppressed, Not Suppressed Industry4Current Employment
Statistics (CES)
CES Production Workers Suppression None, Suppressed, Not Suppressed Reserved for future use.
CES Total Record Suppression None, Suppressed, Not Suppressed Reserved for future use.
Industry 202 Suppression None, Suppressed, Not Suppressed Industry4Covered Employment and Wages (ES)
Industry Projection Suppression None, Suppressed, Not Suppressed Industry4Industry Employment
and Projections)
OCC Wage Suppression None, Suppressed, Not Suppressed Occupation4Occupational Wages
Occupational Projection Suppression None, Suppressed, Not Suppressed Occupation4Occupational
Employment and Projections
Occupational Staffing Patterns Suppression None, Suppressed, Not Suppressed Industry4Staffing Patterns
OES Wage Suppression None Selected, Not Suppressed, Suppress Employment, Suppress Wage, Suppress Employment and Wage
Income and Wages4Occupational Wages, Occupational Wages by OES Code4OES Wage Survey
* “Not Suppressed” allows analysts to view suppressed data.
Archive Analyst Records The Admin system allows you to archive analyst user records. By selecting this account status, Virtual LMI does not send the record to another physical location as the name “archive” might imply. Instead, it prevents the record from appearing in a match list when users conduct a system query. To archive an analyst account, perform the steps in the previous topic, Administer Individuals, to access the Analyst User List screen. Locate the desired user and click the corresponding Archive link (see sample below).
User Administration
V8.0 R2 – 9/2006 52 VOS/VLMI System Administrator Guide
The Admin system displays a screen similar to the one below.
Click OK to archive the selected user record. The Admin system displays a confirmation screen, a sample of which appears below.
Archived Record Confirmation Screen
Click the Return to the results page button to access the updated Analyst User List screen (see below).
Restore Analyst Records You can reactivate archived accounts by changing the account status. To begin, perform the steps in the previous topic, Administer Individuals, to access the Analyst User List screen. Locate the desired user and click the corresponding Restore link (see sample above). The Admin system displays a screen similar to the one below.
Click OK to restore the selected user record. The Admin system displays a confirmation screen, similar to the following sample.
Restored Record Confirmation Screen
Click the Return to the results page button to access the updated Analyst User List screen (see below).
User Administration
V8.0 R2 – 9/2006 53 VOS/VLMI System Administrator Guide
Delete Analyst Records The Admin system allows you to delete user records. By executing this function, it permanently removes the record from its database. Note: The delete record function is irreversible.
To delete an individual account, perform the steps in the previous topic, Administer Individuals, to access the Analyst User List screen. Locate the desired user and click the corresponding Delete link (see sample below).
The Admin system displays a screen similar to the one below.
This is the first of two popup alerts that allow you to cancel without deleting the record. When you click OK to proceed, the Admin system displays another screen similar to the following one:
Click OK to execute the delete function, or Cancel to exit.
V8.0 R2 – 9/2006 54 VOS/VLMI System Administrator Guide
5: Service Administration Note: Depending on your Admin System deployment, the appearance and functions may look different. Some Administrative Service options may not be included. Please refer to your client administrator should you have any questions.
The Admin system allows you to manage activity service codes for registered individuals and employers within Virtual OneStop. You can also manage the equipment and preprogram events for scan card, if these features are included in your Virtual OneStop deployment. To access this option, employ one of the following methods:
• On the navigation menu, click Service Administration. • On the Directory of Administrative Services screen, click Service Administration.
The following figure displays a sample Service Administration Options screen:
Service Administration Options Screen
Select from the following options:
• Individual/Employer Services—manage activity service codes for individuals and employers. • Scan Card Terminals—manage your scan card terminals. • Scan Card Events—create or modify events for scan card tracking.
Individual/Employer Services This option allows you to manage activity service codes the Virtual OneStop (VOS) system employs to identify activities that individual users and employers performed in VOS. These codes also document the various services or activities individuals receive as a result of program enrollment (for example, WIA training or support service enrollment). To access a list of services for individuals and employers, employ one of the following methods:
• On the navigation menu, click Service Administration4Individual/Employer Services. • From the Service Administration Options screen, click Individual/Employer Services.
Service Administration
V8.0 R2 – 9/2006 55 VOS/VLMI System Administrator Guide
The following figure displays a sample Individual/Employer Services screen:
Individual/Employer Services Screen
You can perform the following tasks from this screen:
• To locate a specific service based on its service activity code, type the code in the top box and click Search.
• To reset the list view and return to its original display, click the Clear button. • To access the desired list page:
♦ Use the navigational toolbar by clicking the appropriate jump link. ♦ Type the desired page number in the Enter page number box and click Go.
• To change the status of a particular service, click its Status link. • To edit a particular service, click its Edit link. • To create a new service, click the Add Service button.
Background The base list of activity service codes within the system derives from Federal programs such as Wagner Peyser, WelfaretoWork (WtW), and the Workforce Investment Act (WIA). Geographic Solutions simply adopted these common codes and created new ones to more closely match system functionality. The benefit of this scheme allows you to track and interpret universal activity services, by code, whether performed within Virtual OneStop or a career center agency.
Service Administration
V8.0 R2 – 9/2006 56 VOS/VLMI System Administrator Guide
Part of the responsibility of managing activity service codes relies on your ability to establish guidelines that govern the proper use and application of these codes. The list below describes some of the tasks you will need to perform, and some of the determinations you will need to make:
• Create new activity service codes. • Modify existing activity service codes. • Establish a hierarchy of staffentered rules (for example, will specific activity services serve as
prerequisites for others?). • Determine what programs (for example, WagnerPeyser, WIA, etc.) these service codes pertain
to. • Determine what pages/functions within VOS—performed by selfservice individuals or
employers—would automatically record activity service records.
Fund Tracking Data Structure The formulation and maintenance of these service codes proves especially crucial for clients that use the Manage Fund Tracking module within Virtual OneStop. Accordingly, these codes establish the required data relationship that controls program enrollment with respect to the following elements:
• Program group—to which program does a service/activity belong?
• Provider type—is a service/activity a training or support service? Which type?
• Service type—to which provider type subset does an activity/service belong? Because a program enrollment form in Virtual OneStop (such as the WIA enrollment form) is datadriven, it requires all supporting data be congruent and complete. Specifically, service code data in the Admin system must correlate to program provider data—within the Manage Fund Tracking module—in the Virtual OneStop system. Service code criteria also controls whether to document funding and occupational code information during program enrollment. For additional information related to data correlation, refer to the Virtual OneStop Individual Fund Tracking User Guide.
Status Change By default, the services and activities VOS lists for individuals and employers display an Active status. To change the status of a desired service to Inactive (or to reactivate a deactivated code), access the Individual/Employer Services screen, locate the desired activity service code, and click its corresponding Status link (see below).
In response, the VOS system displays a message similar to the one below.
Click the OK button to execute the change of status command. Virtual OneStop then displays an updated Individual/Employer Services screen, a sample of which appears below.
Service Administration
V8.0 R2 – 9/2006 57 VOS/VLMI System Administrator Guide
Edit Service Virtual OneStop allows you to modify an existing activity service. Although you cannot change the actual service code ID number, you can modify all other servicedescription information. To perform this task, access the desired activity service listing on the Individual/Employer Services screen, and click its Edit link. This yields the Activity Service Edit screen, similar to the following sample:
Service Administration
V8.0 R2 – 9/2006 58 VOS/VLMI System Administrator Guide
This section relates specifically to program enrollment for individuals (for example, WIA) and helps build the required data relationships between Virtual OneStop and IFT (Individual Fund Tracking).
For use when VOS automatically records services provided system users.
This section determines how the selected service code will be federally reported. Use your WIASRD requirements and/or your Data Validation File to map all applicable report categories, one service code at a time.
Activity Service Edit Screen
To modify an existing activity service, perform the following steps: Step Action
1 Deactivate the current service code by clicking Inactive; reactivate the suppressed service code by clicking Active.
2 (optional) Click and drag the mouse in the Service/Activity Description box to highlight the existing description. Type a new description.
Service Administration
V8.0 R2 – 9/2006 59 VOS/VLMI System Administrator Guide
3 Indicate this service code’s display order, as it appears in the entire service code list. 4 Use the Federal Service Code box to create a crosswalk for Federal or State service codes.
Choose from the following tasks: ♦ Click Add Code to record an existing service code. VOS displays the Federal Service Code
window, in which you type the desired code. ♦ Click Reset List to display original data. ♦ Click Clear List to remove the activity service code(s) you just typed.
5 In the Service/Activity Entered By list box, select System, Staff, or Scan Card. Multiple selections are permitted.
6 Click the appropriate radio button to determine whether this activity service code is mandatory for unemployment insurance (UI) profiling. (Y/N)
7 In the Client Type list box, click whom the activity service code pertains to.
Note: Individuals and Employers cannot share the same code ID.
8 Click the appropriate check box(es) to identify program(s) related to the selected service code. This action controls the services available to program staff members for individual/employer service enrollment in VOS.
9 Click to select the desired activity service(s) that must be completed before enrolling an individual/employer in the selected service.
Note: To select multiple activity services, hold the Ctrl key while clicking the desired choices.
10 Identify the VOS Web page(s) that will automatically record the activity service performed by unassisted individuals and employers. This works only if the code is systementered (see Step 5). Click the: ♦ Select pages link to select the appropriate Web page(s) from a list box of choices. ♦ Reset list link to display original data. ♦ Clear list link to remove your choice(s).
11 Indicate the time interval that separates each recorded visit for service enrollment. This works only if the code is systementered (see Step 5).
12 (for WP service codes only) Select whether employer information must be recorded by staff when using this code for program service enrollment.
13 Determine whether the selected activity service can establish a WagnerPeyser Registration Year. This works only if the code is staffentered (see Step 5). Note: Steps 14 to 17 directly impact individual program enrollment (for example, WIA training
services) in Virtual OneStop systems that include the Manage Fund Tracking component.
14 Select the desired provider type to which the selected activity service belongs. Note the following abbreviations: ♦ PS—provider service. Activity services that belong to this provider type may only be selected
for trainingrelated services. ♦ SS—support service. Activity services that belong to this provider type may only be selected
for support service roles. 15 Select the desired service/activity code type to which the selected activity service applies.
Note: The selections made between provider type and activity code type should compliment one another (for example, they both deal with transportation, medical, child care, etc.).
16 Determine whether the selected activity service requires funding. If Yes, you must identify the fund stream it’s tied to during WIA enrollment.
Service Administration
V8.0 R2 – 9/2006 60 VOS/VLMI System Administrator Guide
17 Determine whether the selected activity service requires staff to select an applicable occupation code. If Yes, you must select a comparable occupation code during WIA enrollment (for example, occupational skills training).
18 Determine whether staff must record attained credential information when selecting this code during program enrollment.
19 Select all appropriate reporting categories to determine how this service will be federally reported. Note: Use your WIASRD requirements and/or Data Validation File to map all applicable report
categories, one service code at a time. Some categories (for example, TrainingWIA335 et al) link to multiple activity services.
20 Click Save Changes to secure your edits, or Cancel to exit.
Add Service VOS Admin allows you to customize the list of activity services by adding new ones. The steps to achieve this outcome are the same as those previously described in the Edit Service topic. For details, refer to that topic.
Scan Card Terminals Geographic Solutions supports swipe card technology, whereby services provided to individuals or employers at a sponsored event are automatically uploaded to their service plan in Virtual OneStop. This feature, referred to as the VOScan module or scan card, minimizes staff effort and permits service tracking. Administrators use the Scan Card Terminals option to set up and manage these card swipe devices assigned to physical careercenter locations. To access this feature, employ one of the following methods:
• On the navigation menu, click Service Administration4Scan Card Terminals. • On the Service Administration Options screen, click Scan Card Terminals.
The following figure displays a sample Manage Scan Card Terminals screen:
Manage Scan Card Terminals Screen
Refer to the topics that follow to manage scan card terminals.
Service Administration
V8.0 R2 – 9/2006 61 VOS/VLMI System Administrator Guide
Change Terminal Status By default, the scan card terminals VOS lists display an Active status. To change the status of a desired terminal to Inactive, access the Manage Scan Card Terminals screen, locate the desired terminal, and click its corresponding Status link (see below).
The Virtual OneStop Admin system refreshes the page and turns the selected terminal’s status to Inactive. To return the terminal to its original status, simply click the Status link again.
Add Scan Card Terminals Besides managing existing scan card terminals, VOS Admin allows you to create additional terminal locations within your onestop career center. To begin, click the Add Terminal button on the Manage Scan Card Terminals screen. The system displays a screen similar to the following one.
Add Scan Card Terminal Screen
To add a terminal in your onestop location, perform the following steps: Step Action
1 Type the terminal identification (50 alphanumeric characters or less). 2 Type the terminal name (20 alphanumeric characters or less). 3 Type a unique description (for example, the terminal’s purpose). 4 Select the desired office in which the terminal will reside. 5 Click all the scan card events associated with this terminal. If no active events exist, you cannot
perform this step. 6 Determine auto vs. manual scan card event entry. If you select Yes, staff will be required to enter
event details for clients into Virtual OneStop. If you select No, the VOScan terminal will automatically record event details in Virtual OneStop for clients.
Service Administration
V8.0 R2 – 9/2006 62 VOS/VLMI System Administrator Guide
7 Select the staff member tied to this terminal. 8 Click Save to secure your edits, or Cancel to exit.
Edit Scan Card Terminals To edit a particular terminal, click its Edit link in the Action column, as shown in the following figure.
A terminal information screen displays, similar to the one below.
Edit Scan Card Terminals Screen
Make all necessary changes using this edit screen. Refer to the previous topic, Add Scan Card Terminals, for assistance. Click the Save button to secure your edits, or Cancel to exit.
Scan Card Events A scan card terminal may be preprogrammed to record specific activity services for individuals and employers when their card is swiped. For example, most onestop centers provide Orientation programs, so this Orientation event may be preset in the scan card terminal. Other scan card events may comprise several activity services within the single workshop, so when attendees swipe their cards through the preprogrammed terminals, Virtual OneStop automatically
Service Administration
V8.0 R2 – 9/2006 63 VOS/VLMI System Administrator Guide
records all these services and uploads them to the person’s service plan, which may be found in the Activities tab of the Case Management Profile. Administrators use the Scan Card Events feature to preprogram onestop events into the terminals, and may even establish user requirements in an effort to deter walkouts. To access this tool, employ one of the following methods:
• On the navigation menu, click Service Administration4Scan Card Events. • On the Service Administration Options screen, click Scan Card Events.
The following figure displays a sample Events List screen:
Events List Screen
You can perform the following tasks from this screen:
• To change the default display option, select another status from the dropdown list. • To sort the list, click the column heading by which to sort. • To access the desired list page (if the list exceeds one page), type the desired page number in
the Enter page number box and click Go. • To change the status of a particular event, click its Status link. • To edit a particular event, click its view/edit link in the Action column. • To create a new event, click the Add Event button. For details, refer to the Add Event topic that
follows:
Change Event Status By default, the scan card events VOS lists for individuals and employers display an Active status. To change the status of a desired event to Inactive, access the Events List screen, locate the desired event, and click its corresponding Status link (see below).
The Virtual OneStop Admin system refreshes the page and turns the selected event’s status to Inactive. To return the terminal to its original status, simply click the Status link again.
Service Administration
V8.0 R2 – 9/2006 64 VOS/VLMI System Administrator Guide
Add Event Virtual OneStop allows you to create a new scan card terminal event. To perform this task, access the Events List screen, and click the Add Event button. This yields the Add Event screen, a sample of which appears below.
Record early start times and late end times to accommodate clients who arrive early and/or stay late. VOS will not record actual scan times outside the event start and end times.
Add Event Screen
To add an event, perform the following steps: Step Action
1 (Required) Type the event name (50 alphanumeric characters or less). 2 Type a description of the event. 3 Required) Click the desired event type. Choices include OneTime, Reoccurring daily, and
Reoccurring weekly.
Note: Two separate events cannot occupy the same timeframe on the same terminal.
Service Administration
V8.0 R2 – 9/2006 65 VOS/VLMI System Administrator Guide
4 (Required only if you selected OneTime in Step 3) Enter the event’s start and end date by: ♦ Typing the dates in mm/dd/yyyy format, OR ♦ Clicking the calendar icons. Use <> arrows to select the month, and <<>> arrows to select
the year. Click the day of the month to create the date, and click Select to save the changes. 5 (Required only if you chose Reoccurring weekly in Step 3) Select the desired reoccurring day
from the dropdown list. 6 Enter the event’s start and end time by selecting the desired hour, minute, and AM or PM
designation. 7 Select all the activity services that comprise the event.
Note: To select multiple activity services, hold the Ctrl key while clicking the desired services.
8 Select the staff member associated with this event (for reporting purposes). 9 (Required) Select the scan card terminal associated with this event. If no active terminals exist,
you cannot perform this step. 10 Select which terminal associated with the event will provide a backup event log (report), should
participants forget to swipe their cards in the terminal. 11 (Required) Select whether participants must swipe their cards to exit from the event. This helps
deter walkouts, as a Yes setting will only record the service(s) to the participant’s service plan if they scan out of the event.
12 (Required only if you selected Yes in Step 9.) Enter the time following the initial scanin that VOS will automatically record as the event log scanout time.
Note: Completing Step 12 only records an event scanout time for clients participating in the event. It will NOT automatically upload the related activity service(s) to a client’s account if scan out is required to record the service(s). Refer to the next Step/Action table for more information.
13 Click Next to proceed, or Cancel to exit.
The Virtual OneStop Admin system refreshes the Add Event screen, and displays a screen similar to the one below.
Service Administration
V8.0 R2 – 9/2006 66 VOS/VLMI System Administrator Guide
Add Event Screen, Part 2
Perform the following steps to complete the Add an Event procedure: Step Action
1 Select whether clients must scan out of an event activity service for Virtual OneStop to record the information and upload it to the clients’ accounts. Click Yes to enforce the scan out, or No to disregard it.
2 If you selected Yes for any of the event activities, you must select a mandatory time interval from the dropdown list. This forces clients to scan in, attend the activity for the duration you set, and scan out of the event activity in order to receive credit for services rendered.
3 (optional) Click Add Services to revise the event services that will be recorded and uploaded to the participant’s service plan.
4 Confirm the event scan out information established previously. 5 Click Save to save your changes. The system employs your input and displays the updated
Event List screen.
Service Administration
V8.0 R2 – 9/2006 67 VOS/VLMI System Administrator Guide
Edit Event Virtual OneStop allows you to modify an existing event. To perform this task, access the desired event on the Events List screen, and click its View/Edit link (see below).
This yields the Event Edit screen, a sample of which appears below:
Event Edit Screen
Make any necessary changes to the displayed event information. Click Save to save your changes, or Cancel to exit.
Data Administration
V8.0 R2 – 9/2006 68 VOS/VLMI System Administrator Guide
6: Data Administration The Admin system offers this module to manage user records, imported and exported data, database tables you have access to, Help files, and generic program setup. To access this feature, employ one of the following methods:
• On the navigation menu, click Data Administration. • On the Directory of Administrative Services screen, click Data Administration.
The following image displays a sample Data Administration Options screen:
Data Administration Options Screen
Select from the following options:
• Import/Export Data—allows specific information to be shared with other legacy systems, typically a State mainframe or other type of system.
• Data Modification—allows you to create, modify, or delete fields and their values for specific data tables you have access to.
• Archive Records—allows the system to automatically archive various records based on criteria you set.
• Restore Records—allows you to reactivate archived (suspended) records. • Help System Maintenance—allows you to modify or delete the Help text displayed in the system. • Generic Setup—allows you to establish nonFederal programs whose fund expenditures may be
tracked.
Note: Actual system components within Data Administration may vary.
Import/Export Data The import/export data function allows specific system (VOS) information to be shared with other legacy systems, typically a State mainframe or other type of system.
Data Administration
V8.0 R2 – 9/2006 69 VOS/VLMI System Administrator Guide
To access this feature, employ one of the following methods:
• On the navigation menu, click Data Administration4Import/Export Data. • On the Directory of Administrative Services screen, click Data Administration4Import/Export
Data. The following image displays a sample Import/Export Data Options screen:
Import/Export Data Options Screen
In this sample, VOS Admin creates a data extract file for all WIA enrollment data in the VOS system. When you click the displayed link, the system will display subcategories of file data on a subsequent page that are available for upload (see sample below).
Choose File Extract Screen
Had actual data been available, the Admin system would display a hotlink for each, allowing you to click a desired link to execute the specified data transfer.
Data Modification Geographic Solutions creates an access plan that allows you to edit specific tables within the Virtual OneStop database. Normally it restricts this access to lookuptable data, the modification of which will not greatly impact system functionality. Geographic Solutions restricts access to data tables whose modification might disable related system functions. To access this function, employ one of the following methods:
• On the navigation menu, click Data Administration4Data Modification. • On the Data Administration Options screen, click Data Administration4Data Modification.
The following figure displays a sample Table List screen:
Options may vary.
Data Administration
V8.0 R2 – 9/2006 70 VOS/VLMI System Administrator Guide
Table List Screen
Click the appropriate view option to view the desired table information. The Admin system displays only those tables you may access. To view the field and field values that comprise a listed table, click the desired Table link. A screen appears similar to the one below.
Table Data List Screen
You can perform the following tasks from this screen:
• To access a specific data element (record), click the Search link. • To access a desired list page:
♦ Use the navigational toolbar by clicking the appropriate jump link (not shown).
♦ Type the desired page number in the Enter page number box and click Go (not shown). • To alter the number of viewable data elements, type the desired number in the Records per page
box and click Go (not shown). • To modify or delete a particular data element, click its Edit link. • To create a new data element for the selected table, click Add New Record. • To exit the Table Data List screen, click Return to Table List.
Click the appropriate view option to view the desired table information.
Data Administration
V8.0 R2 – 9/2006 71 VOS/VLMI System Administrator Guide
Search for Records Note: Actual system components within Data Administration may vary. Data tables and lookup tables consist of numerous records (data elements) that comprise multiple pages on the Table Data List screen. The Admin system provides a search feature to help you access a specific record. To begin, click the Search link on the Table Data List screen. A screen appears similar to the one below.
Record Modification Search Window
Based on the table data available to you, your search screen options may vary. In this case, type either the numeric LWIA ID or its text name (LWIA = region). Specify the depth of the search by clicking the appropriate radio button, and click Search. Based on your search criteria, the Admin system displays a modified version of the Table Data List screen (see previous sample). To modify the data table, refer to the next topic.
Modify Record Note: Actual system components within Data Administration may vary. Whether you click a record’s Edit link on the Table Data List screen or the Record Search Results screen, The Admin system displays a screen similar to the one below.
Record Modification Screen
Based on the table data available to you, your display screen options may vary. In this case, type you may edit either the numeric or alpha text that identifies the selected region. Click Save to secure your edits, or Cancel to escape.
Data Administration
V8.0 R2 – 9/2006 72 VOS/VLMI System Administrator Guide
Add New Record Note: Actual system components within Data Administration may vary. If you need to add new records to a selected table, click the Add New Record button. The Admin system displays a screen similar to the one below.
Add New Record Screen
Type the appropriate information in the boxes provided and click Save.
Archive Records The Admin system provides a method for archiving data that meets your criteria. The system does not move this data to another location. Instead, when users conduct records searches, VOS prevents the display of these archived (suspended) records. To access this feature, employ one of the following methods:
• On the navigation menu, click Data Administration4Archive Records. • On the Data Administration Options screen, click Archive Records.
The following figure displays a sample Select Criteria screen:
Select Criteria Screen
To begin, type a desired number in the # of Days boxes. This number serves as a cutoff value to complete the conditional statement listed in the Item column. For example, if you type 45 in the first text box, VOS will archive all account records for individual users who did not log in to the system within the last 45 days.
Data Administration
V8.0 R2 – 9/2006 73 VOS/VLMI System Administrator Guide
When you finish typing your selection criteria, click the View Results button. The Admin system displays a screen similar to the sample below.
Archive Summary Screen
To view a list of records—by Item—set for archiving, click the desired See List link. A screen similar to the sample below appears.
Records to Archive List Screen
Use this screen to individually select records to archive, or simply review the records listing. To archive all records displayed, click the Archive All Records button. A window appears, similar to the sample below.
Click a desired Archive link to affect only that record.
Data Administration
V8.0 R2 – 9/2006 74 VOS/VLMI System Administrator Guide
Click OK to execute the Archive All command. The system displays a confirmation screen, similar to the following figure.
Archive Confirmation Screen
Note: The Admin system allows you to reverse this action, if necessary. Refer to the Restore Records topic for details.
Restore Record The Admin system allows you to restore records previously archived, thus restoring the default Active status. To access this feature, employ one of the following methods:
• On the navigation menu, click Data Administration4Restore Records. • On the Data Administration Options screen, click Restore Records.
The following figure displays a sample Restore Summary screen:
Restore Summary Screen
To view a list of records—by Item—set for restoration, click the desired See List link. A screen similar to the sample below appears.
Click here to return to the Archive Summary screen.
Data Administration
V8.0 R2 – 9/2006 75 VOS/VLMI System Administrator Guide
Records to Restore List Screen
Use this screen to individually select records to restore, or simply review the records listing. To restore all records displayed, click Restore All Records. A window appears, similar to the sample below.
Click OK to execute the Restore All command. The system displays a confirmation screen, similar to the following figure.
Restore Confirmation Screen
Click a desired Restore link to affect only that record.
Click here to return to the Restore Summary screen.
Data Administration
V8.0 R2 – 9/2006 76 VOS/VLMI System Administrator Guide
Help System Maintenance Part of the success of the Virtual OneStop system is incorporation of features and abilities to easily guide users through task completion.
Employers, job seekers, staff and analysts may all click Help text bubbles anywhere within either system to access support information. Although Geographic Solutions normally manages updates to Help text, clients may request to manage their Help text files and assume total responsibility for its upkeep. To manage Help text files that appear within Virtual OneStop/Virtual LMI, administrators use the Help System Maintenance component in the Admin system.
Note: Depending on your Admin system deployment, this component may not be active.
To access this feature, employ one of the following methods:
• On the navigation menu, click Data Administration4Help System Maintenance. • On the Data Administration Options screen, click Help System Maintenance.
The following figure displays a sample Help Record Display screen:
Help Record Display Screen
You can perform the following tasks from this screen:
• To sort the list, click the column heading by which to sort. • To access the desired list page:
• Type the desired page ID (for example, “training”) in the Search by: textbox and click the Search link (see sample URL address).
• Click the Next and Previous links to page forward and backward one page at a time.
Data Administration
V8.0 R2 – 9/2006 77 VOS/VLMI System Administrator Guide
• Type the desired page number in the Enter page number box and click Go. • Type the desired number of records to display (per page) in the Display box and press Enter. • To modify an existing Help record, click the desired Page ID link. For details, refer to the next
topic.
Edit Existing Help Record In order to locate a desired Help record in the Admin system, it might be helpful to first identify where the Help file exists in VOS. To demonstrate this relationship, consider the Background Wizard component, a sample of which appears below. Each of the sections contains a Help bubble, the text for which administrators control using the Help System Maintenance component.
Screens/pages can have multiple screen groups with multiple help information links
Background Tab Folder
The Internet browser displays the VOS page name in the address bar (see below).
Data Administration
V8.0 R2 – 9/2006 78 VOS/VLMI System Administrator Guide
Because the Admin system lists Virtual OneStop page names (without extensions) alphabetically, locate the listing for “bgwizard.” There should be separate listings, as shown in the Order column, one for each step of the Background Wizard (see below).
To access a Help record, click its corresponding Page Id link. The Admin system displays a screen similar to the one below.
Help Record Edit Screen
Data Administration
V8.0 R2 – 9/2006 79 VOS/VLMI System Administrator Guide
The following table defines the Help text components as found in the Admin system: Item Description
Page ID Displays the Virtual OneStop page name (without extension) that contains Help text.
Section ID Displays the portion of the VOS page to which the Help text applies.
Display Order Displays the sequential order the Help text appears in, if multiple sections apply.
Section Title Displays the English name of the page section the Help text English appears in.
Section Description Displays the English Help text in its entirety. HTML style English conventions are used for font style (for example, bold).
Section Title Displays the Spanish name of the page section the Help text Spanish appears in.
Section Description Displays the Spanish Help text in its entirety. HTML style Spanish conventions are used for font style (for example, bold).
Note: Spanish titles and descriptions apply to the Spanish language setting in Virtual OneStop. Failure to provide nonEnglish titles and descriptions results in a “Translation Required” message that appears in each text box.
After modifying information in the Help record, click Save to secure your edits or Cancel to exit.
Help Text Display When users click a Help bubble (for example, in Step 1 of the Background Wizard)…
Virtual OneStop displays a Help text window, similar to the one below.
Help Text Window
Data Administration
V8.0 R2 – 9/2006 80 VOS/VLMI System Administrator Guide
When you compare the text to the corresponding Help record in the Admin system, the information is identical:
Help Text Record
Generic Setup An individual’s Case Management Profile within the Virtual OneStop system maintains detailed information about their participation in federal programs such as the Workforce Investment Act (WIA). In this instance, a full program setup is required, and includes the application and maintenance of extensive business rules as program rules change. These federal programs may also be tied to the fund tracking module within Virtual OneStop to monitor the flow of program funds and establish account limits for participants. Optionally, there are small, generic (nonfederal) programs run within Local Workforce Investment Areas (LWIAs) and State systems that do not require full program setup with extensive business rules. In order to accommodate the establishment of this initiative, and to allow for the fund tracking mechanism, the system Administrator must first define each program that exists under the Generic Program category, and tie each to a specific LWIA.
Note: Depending on your Virtual OneStop Admin system deployment, this component may not be active.
To access this feature in the Admin system, employ one of the following methods:
• On the navigation menu, click Data Administration4Generic Setup. • On the Data Administration Options screen, click Generic Setup.
The following figure displays a sample Generic Setup Options screen:
Generic Setup Options Screen
Select from the following options:
• Create Program—use this option to identify all local programs associated with Generic Program tracking. For details, refer to the next topic.
• Associate LWIA and Program—use this option to connect a local program (as defined by the Administrator) with a desired LWIA so that staff may properly enroll individuals in these programs
Data Administration
V8.0 R2 – 9/2006 81 VOS/VLMI System Administrator Guide
using the Virtual OneStop system. For details, refer to the Program/LWIA Association topic on page 82.
Create/Edit Program In order to complete the first phase of Generic Program setup, you must record information for any local programs your onestop agency offers. Not only may you create new programs using this interface, you may also edit existing ones. To access this option, employ one of the following methods:
• On the navigation menu, click Data Administration4Generic Setup4Create Program. • On the Generic Setup Options screen, click Create Program.
The Admin system displays a screen similar to the one below.
Generic Program Options Screen
Using this interface, you may perform two tasks:
• Edit an existing program—click the dropdown arrow and select the desired program from the displayed list. For edit details, refer to the step/action table that follows.
• Create new program—click the Add Program button. The Admin system displays a screen similar to the following figure:
Create Generic Program Screen
Click this dropdown arrow to modify an existing program.
The program ID is systemset upon Save.
Data Administration
V8.0 R2 – 9/2006 82 VOS/VLMI System Administrator Guide
To add a generic program (or edit an existing one):
Step Action
1 Type the userdefined program code for the generic program. 2 Type a brief program description.
Note: Case managers and other staff will select whatever you type when they enroll individuals in this generic program.
3 (optional) Enter the program’s ‘end date’ by: ♦ Typing the date in the Inactive Date box in mm/dd/yyyy format
OR ♦ Clicking the calendar icon next to the Inactive Date box.
Note: Use the month/year list boxes, , or the arrows to select the month, < >, and year, << >>. Click the day of the month to create that date, and click Select.
4 Type the numeric place holder (display order) for this program. 5 Select User Defined as the program type. 6 Click Save to save your changes.
Program/LWIA Association In order to complete the second phase of Generic Program setup, you must tie a desired local workforce investment area (LWIA) or region to a desired local (generic) program. Not only may you create new LWIA associations, you may also edit existing ones. To access this option, employ one of the following methods:
• On the navigation menu, click Data Administration4Generic Setup4Associate LWIA and Program.
• On the Generic Setup Options screen, click Associate LWIA and Program. The Admin system displays a screen similar to the one below.
Select LWIA Screen
To associate a LWIA to a generic program, perform the following steps: Step Action
1 Select the desired LWIA from the dropdown list.
Note: Local administrators will only see their LWIA.
2 Click the checkbox for each generic program that should be associated with the selected LWIA. 3 Click Save to save your changes.
V8.0 R2 – 9/2006 83 VOS/VLMI System Administrator Guide
7: Admin Administration Geographic Solutions created this option for a Master Administrator to manage all Admin system users regardless of their access levels. The benefit of this scheme provides only key people unlimited access to control system data and Admin account data, thus providing an added measure of security.
Note: This service option is only available to Master Administrators, which are State or Local Administrators granted masterlevel privileges.
To access this option, employ one of the following methods:
• On the navigation menu, click Admin Administration. • On the Directory of Administrative Services screen, click Admin Administration.
The Admin system displays a screen similar to the one below.
Admin Administrator Options Screen
You can select from the following options:
• Administer an Admin Account—controls modification of existing administrator accounts. • Create an Admin Account—controls the addition of system administrator accounts.
Administer an Admin Account This option allows you—the Master Administrator—to manage account data for existing administrators. These include State and Local Administrators, some of which are granted Master Administrator privileges at your discretion. State Administrators may access the Admin system to add, modify, and delete account data for staff and individual users regardless of their regional origin. Local Administrators may only control staff and individual users who belong to the same region as they do. This level administrator cannot create new administrator accounts like Master Administrators (and State Administrators granted Master Administrator privileges) can. Currently, employer account data is not tied to regions like that of individual users. Any level administrator can therefore add, modify, and delete employer account data. To access the Administer an Admin Account option, employ one of the following methods:
• On the navigation menu, click Admin Administrator4Administer an Admin Account. • On the Admin Administrator Options screen, click Administer an Admin Account.
The Admin system displays a screen similar to the one below:
Admin Administration
V8.0 R2 – 9/2006 84 VOS/VLMI System Administrator Guide
Administrator Account Search Screen
Enter the appropriate search criteria to access the desired administrator account. You may search by username, first name, last name, or region to which the administrator belongs. To access all State Administrators, for example, select this option from the Region list box and click Find Administrators. This yields a screen similar to the following one.
Administrator Search List Screen
You can perform the following tasks from this screen:
• To modify an existing account, click the desired username link. • To delete an existing account, click the desired Delete link in the Action column. • To create a new administrator account, click Add a New Administrator. • To initiate a new search, click Change Search Criteria.
Local administrators may only search within their own region. State administrators may search within any region statewide.
Admin Administration
V8.0 R2 – 9/2006 85 VOS/VLMI System Administrator Guide
Modify an Administrator’s Account As the Master Administrator—or a subadministrator with Master Administrator privileges—you can edit the account information for an existing administrator. To begin, click the desired username link on the Administrator Search List screen (see above). This yields the Edit Administrator Account screen, similar to the following sample.
Only for Virtual OneStop
Only for Virtual LMI
Edit Administrator Account Screen
This screen divides account information into two sections:
• User Information—displays contact information for the selected administrator. • Access Privileges—displays a series of “Yes/No” switches that correspond to the service options
listed in the left navigation menu.
Admin Administration
V8.0 R2 – 9/2006 86 VOS/VLMI System Administrator Guide
In the User Information section, select the desired text box(es) to edit and type the modified data. In the Access Privileges section, determine whether the selected administrator should receive Master Administrator privileges. If you click Grant this user Master Administrator privileges, the Admin system displays a window similar to the one below:
By clicking OK, the system provides unlimited system access to this individual, regardless of the access privileges previously selected. In fact, all access privileges previously set to No will automatically update to Yes. To secure your edits, click Save Changes.
Delete an Administrator’s Account The Admin system allows you—the Master Administrator—to delete administrator account information. To begin, perform a system search to access the Administrator Search List screen, a sample of which appears below:
Administrator Search List Screen
Click the Delete link for the desired administrator. This yields a warning window similar to the one below:
Click OK to execute the delete command.
Add a New Administrator By clicking the Add a New Administrator link on the Administrator Search List screen, the Admin system displays the Add New Administrator screen. For detail of this function, refer to the following topic.
Admin Administration
V8.0 R2 – 9/2006 87 VOS/VLMI System Administrator Guide
Create an Admin Account As the Master Administrator (a State or Local Administrator with Master Administrator privileges) you can create new administrator accounts within the Admin system. To access this option, employ one of the following methods:
• On the navigation menu, click Admin Administrator4Create an Admin Account. • On the Admin Administrator Options screen, click Create an Admin Account. • On the Administrator Account Search screen, click Add a New Administrator. • On the Administrator Search List screen, click Add a New Administrator.
The Add New Administrator screen is displayed. The screen is identical to the Administrator Search List Screen (shown in the previous topic), but all User Information fields are blank, and all Access Privileges start as No. Complete this screen the same way you would to modify an existing administrator account screen. For more information, see the previous Modify an Administrator’s Account topic.
V8.0 R2 – 9/2006 G1 VOS/VLMI System Administrator Guide
Glossary ACINET America's Career Information Network – CareerOneStop
ADA Americans with Disabilities Act
AEFLA Adult Education and Family Literacy Act of 1998
AEA/USA Adult Education Association of the United States America
COS CareerOneStop
CRT Criterion Referenced Tests
CWP Center for Workforce Preparation US Chamber of Commerce
DAEL Division of Adult Education and Literacy
DOE Department of Education
DOLETA Department of Labor, Employment and Training Administration
TAA Trade Adjustment Act
TABE Test of Adult Basic Education
TANF Temporary Assistance for Needy Families
VOS Virtual OneStop
Glossary
V8.0 R2 – 9/2006 G2 VOS/VLMI System Administrator Guide
VLMI Virtual Labor Market Information
WEB Workers Education Bureau
WEP Workplace Education Programs
WIA Workforce Investment Act
WIB Workforce Investment Board
Index
V8.0 R2 – 9/2006 I1 VOS/VLMI System Administrator Guide
Index A
AccessLogging In, 1
Access Privileges Staff, 17
Access Group, 22 Case Assignment, 23 Employer Case Management, 23 IFT Individual, 24 Individual Activities, 22 Individual Assessment, 23 Individual File Folders, 24
Account Creation Staff, 27
Admin Account Creation, 86 Deletion, 85
Admin Account Administration, 82
Administration Staff, 17
ALMIS Parameters, 8
Analyst Administration, 49
C
Creating Administrator Accounts, 86
Creating Privilege Groups, 31
Creating Staff Accounts, 27
D
Data Administration, 67 Help, 75 Import/Export, 67 Restore Record, 73
Default Settings, 5
Deleting Administrator Accounts, 85
E
Email Addresses, 4
Employer Administration, 45
Event Calendar, 15
F
Fund Tracking Data Structure Administration, 56
H Help System Administration, 75
I Import/Export Administration, 67
Individual Administration, 41
Individual/Employer Services Administration, 54
L
Logging In, 1
P
Privilege Groups Creation, 31
R Record Restoration, 73
S Scan Card Administration, 59
Service Administration, 54 Fund Tracking, 56 Individuals/Employers, 54 Scan Card, 59
Staff Account Access Group Privileges, 22 Administration, 17 Case Assignment Privileges, 23 Employer, 23 Individual Activities Privileges, 22 Individual Assessment Privileges, 23 Individual IFT, 24 Individual Privileges, 24
Staff Administration, 17
System Settings, 4 ALMIS, 8 Defaults, 5 Email Addresses, 4 Event Calendar, 15
Index
V8.0 R2 – 9/2006 I2 VOS/VLMI System Administrator Guide
U User Administration, 40
Analysts, 49 Employers, 45 Individuals, 41