vsa client_installation procedure

8/3/2019 VSA Client_installation Procedure

1/14

Page 1 of 14Created by IBM_USER

Overall view picture of vsa


2/14


Login to https://vsa.boulder.ibm.com/ for more information

1.VSA client v 2.5.4 installation and addition procedure

1. Oldtux200 is proxy server for VSA software. Login to oldtux200

2. from otrs07 ssh to oldtux200
https://vsa.boulder.ibm.com/https://vsa.boulder.ibm.com/


3/14


ftp client.tar.gz to /tmp of the system ,where vsa clients need to be installed.

To install VSA client on Unix systemPrerequisite/ - 10 MB free/tmp -150 MB free/var ----100 MB freeseparate /tmp file system .

Then check for 6543 port open in both direction it need to work fine


4/14


Start installation1. come to /tmp untar the client.tar.gz

Verify the output

Confirm Ping test worked fine.-> WRS VSACOMM Installed-> Running client pingGot Ping! [pear-vsawrs]--------------------------------------------------------------------------------Hop VSAUUID LOCALTIME HOSTNAME--------------------------------------------------------------------------------

1 VSA5080F93E71B611DC9B390011251E497C Wed Oct 3 07:51:52 2007 oldtux1332 VSAA89DA560C69811DA9D320011251E497C Wed Oct 3 08:50:51 2007 oldtux200

--------------------------------------------------------------------------------Duration: 2s

Run dragnet on client

wait for 10 minuteslogin tohttps://167.210.153.197

Login as rammaghentharPasswd : set4ram

Please let me know persions name if anybody use this id.
https://167.210.153.197/https://167.210.153.197/


5/14


Accept yes

click loginLogin as rammaghentharPasswd : set4ram


6/14


Select Unix e-admin

on manage menu select modify applications

Choose App Name Pearson UNIX


7/14


Select host from available hosts list and then click Assign Host(s) to Application

And click done

Selection the modules

sedule the system


8/14


Select the Host name in the left sideSelect the Schedule frequency to Daily

Schedule Type check

Select Schedule Host(s)

Select lssecfix


9/14


Select the Host name in the left side

Select the Schedule frequency to DailySchedule Type check

Select Schedule Host(s)

Select the sec_scan


10/14


Select the Host name in the left side

Select the Schedule frequency to Daily

Schedule Type checkSelect Schedule Host(s)


11/14


Then run dragnet s on VSA client . ( wait for 40 minutes)


12/14


select the WRS Administration


13/14


select the system then add then Ok

VSA client removel procedure1) rm /etc/e-admin.conf2) rm -fr /etc/vsa3) Remove "dragnet" line in root's cron4) modify /etc/inittab and remove the line with:"vc:2345:respawn:/etc/vsa/bin/vsacomm/vsacomm"5) kill -HUP xxxx where xxxx is PID of init. Usually it is "1"6) rm -rf /tmp/vsacomm* /tmp/e-admin*

? instead of the kill -HUP 1, youcan : init q

[root@oldtux200 client]# pwd/vsa/e-admin/software/client

ftp client.tar.gz to < vsa client>/tmp

1. ProblemVSA need separate /tmp file system. If your system doesnt have temporary /tmp need to seFORCETEMP=1


14/14


Then save the file

2. problem port is not open check for status and correct it.

this is the problem with port so the system will not work . work resolve the network issue

3.You may not able to WRS server access to any VSA client .Solution

Remove and reinstall VSA client on the client system. Then send a mail to

[email protected] for VSA issuses
mailto:[email protected]:[email protected]

vsa client_installation procedure

Documents