water technologies water purification products and services catalog

Water PurificationProducts andServices Catalog

Water Technologies

This electronic catalog featuresprogramming which allows easypoint-and-click navigation. Thecatalog features a “Main Table ofContents” and actions buttons toreturn to “Section Table ofContents” or to return to the priorselection “Go Back” buttons.

“Main Table of Contents” and“Section Table of Contents” allowthe user to scroll over subjects andadvance by clicking on the titles.

Click here to enter the catalog.

Main Table of Contents

At Siemens Water Technologies, our mission is to

provide products and services to meet your water

treatment needs, any time, any place. As one of

the world’s largest water treatment companies,

we offer a wide range of products and services,

combined with experience and technical

knowledge you can trust. We will deliver a

solution that meets even the most stringent

specifications. And, because your satisfaction is

important to us, we stand behind the quality of

our products and services.

Table of Contents

PRODUCT QUICK REFERENCE GUIDE BY INDUSTRY . . . . . . . . . . . . . . . . . . 2

WATER TREATMENT TECHNOLOGIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

PRODUCTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

WASTEWATER CAPABILITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212

SUPPORT SERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215

WATER QUALITY STANDARDS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 231

GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246

TRADEMARK STATEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253

For a detailed table of contents, refer to each section’s table of contents.

S

U

M

M

A

R

Y

W A T E R

P U R I F I C A T I O N

P R O D U C T S

A N D S E R V I C E S

C A T A L O G

1

BACK

2 PRODUCT QUICK REFERENCE GUIDE BY INDUSTRY

Siemens Water Technologies24-hr Customer Service: 800.466.7873

BACK Main Table of Contents

Use this table only as a guideline. Products may be used in other industries depending on your specifications.

ACTIVATED CARBON FILTERS

CT Series Carbon Towers l l l l

HOT Series Systems l l l l

KF Series l l l l l l l

VP Series l l l l l l

Mobile l l l l l l l l l l

CHEMICAL FEEDSYSTEMS l l l l l l l l l l l l

CLARIFIERSPackage Precipitators l l l l l l l l l

DEAERATORSSLH Deaerating Heaters l l l l l l l

DG Series Forced Draft Decarbonators l l l l l l l l l l l

DEIONIZATION

CDI-LX™ Systems l l l l l l l l l l

CDI-LX™ Low Profile Kits l l l l l l l l l l

Deionization RecirculatingSystems (DIRS) l l l l l l l l l l l l l l

VP Series Two Beds l l l l l l

VP Series Mixed Beds l l l l l l

Mobile l l l l l l l l

C O N S U LT T H E S E G U I D E L I N E S TO F I N D S I E M E N S WAT E R T E C H N O L O G I E S P R O D U C T S A N D S Y S T E M S F O R Y O U R I N D U S T RY.I N D U S T R I E S A R E L I S T E D AT T H E TO P.

3PRODUCT QUICK REFERENCE GUIDE BY INDUSTRY

SiemensWater Technologies

Technical Support 800.875.7873 ext. 5000



SERVICE DEIONIZATION (SDI)Tanks, Deionizers, Carbon and Resin l l l l l l l l l l l l l l

WATER SYSTEMS INTEGRATED

EPV™ Systems l l l l l

PreVUE® Systems l l

APEX™ Systems l l

MULTIMEDIAFILTERSAVGF Gravity Filters l l l l l l l l l l

KF Series l l l l l l l


Mobile l l l l l l l l l l

RO SYSTEMSMicRo Series l l l l l l l

40 Series l l l l l l l

Pharm40 Series l l

BevMAX™ l

Vantage™ M21, 41, 43 l l l l l l

Vantage™ M83, M84 l l l l l l l l l l

Vantage™ M240 l l l l l l

Vantage™ M280 l l l l l l l l l


4 PRODUCT QUICK REFERENCE GUIDE BY INDUSTRY



(continued from page 3)


LABORATORY PRODUCTS


MEDICAL RO (DIALYSIS)Med-RO® RX Series l l

SOFTENERSKF Series l l l l l l l


PURELAB® Ultra l l l l l l l l

PURELAB® Classic l l l l l l l

PURELAB® UHQ Water Purification Systems l l l l l l l

PURELAB®Option Water Purifiers l l l l l l

MEDICA® l

MEDICA® Pro l l

REVERSE OSMOSIS SYSTEMSPURELAB® Prima l l l l l l l

CENTRA® (HF) l l l l l l l

MODULAB® (HF) l l l l l l

Water Treatment Technologies

T A B L E O F

C O N T E N T S

Removal of Common Contaminants Chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Activated Carbon Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Chemical Addition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Clarification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8

Continuous Electrodeionization (CEDI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Dealkalization. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Degasification/Deaeration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Deionization (DI) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Distillation for WFI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

Filtration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Reverse Osmosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

S3™ Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Sanitization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Softening . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

Ultraviolet Sterilization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

5


6

Removal of Common Contaminants


Section Table of ContentsBACK

COMMON CONTAMINANTS C

Alkalinity Carbon Calcium, Chlorine, InorganicsDioxide Magnesium Chloramines (dissolved) o

Activated Carbon Filtration l

Chemical Addition l l l l l l

Clarification

Continuous Electrodeionization (CEDI) l l l l l l l

Dealkalization l

Degasification/Deaeration l

Deionization l l l l l l l

Distillation l l l l l l l l l l

Filtration

Reverse Osmosis (RO) l l l

Sanitization

Softening l l

Ultraviolet Sterilization l

TECHNOLOGY

7




COMMON CONTAMINANTS

Iron Microbiologicals Organics Particles Pyrogens Silica Description(dissolved) of Technology

l 8

l l 8

l 8

l l l 9

9

10

l l l 10

l l l l l l 11

l 12

l l l l l l 14

l l l 14

l 15

l l 15

Removal of Contaminants is based on the proper use of equipment in the appropriate treatment train. Products are combined to form the best solution for you. Use this table only as a guide.

8 WATER TREATMENT TECHNOLOGIES



ACTIVATED CARBON FILTRATIONActivated carbon is carbon that has been processed at high temperature to form

a material with high adsorptive capacity. Usually available in a granular or

powdered form, activated carbon is used to remove chlorine, chloramines and

dissolved organics from water. Carbon filters are frequently used as pretreatment

to membrane and ion exchange-based systems that can be damaged by oxidants

such as chlorine. Two types of activated carbon media:

• High-capacity granular carbon for chlorine removal.

• Organic reduction carbon that uses bituminous coal activated at high

temperature for adsorption of both high and low molecular weight organics.

There are several different types of activated carbon filters available, including

service carbon, backwashable carbon and steam or hot-water-sanitizable carbon.

CHEMICAL ADDITION Chemicals are often added during or after industrial and municipal water

treatment to enhance the treatment process or further treat the water to meet

specific customer requirements.

The water’s pH is sometimes adjusted to meet the operating specifications

required by certain membranes or ion exchange resins. This is accomplished by

adding caustic soda to raise the pH, or acid to reduce the pH. Dispersants or

antiscalants are sometimes added to prevent scaling from a concentration of

specific ions in the water. Oxidizing agents, sequestering (chelating) agents and

reducing agents can also be added to the water. Oxidizing agents are used to

prevent microbial growth. Sequestering agents help prevent hardness minerals,

such as calcium and magnesium, from depositing on the surface of water

systems, system piping and tanks. Reducing agents, such as sodium

metabisulfite, are added to neutralize oxidizing agents, such as ozone or chlorine,

or remove oxygen.

CLARIFICATIONClarification is a multi-step process that reduces turbidity and suspended matter. It

also reduces iron and removes color, taste and odor in the water by adding oxidizing

agents, such as chlorine. Clarification consists of three steps: coagulation,

flocculation and sedimentation. During the coagulation stage, chemical coagulants

or pH-adjustment chemicals are used to destabilize the particles. During the

flocculation stage, other chemicals are added to take the previously destabilized

particles and make them stick together. They become agglomerated and form a floc.

During sedimentation, the floc settles by gravity and separates from the water.

9




Continuous ElectrodeionizationSiemens CDI® System

Feed Water NaCl ¶

¹º

¸ ¸·

Product Water H2O

¼

Waste Stream (NaCl) Concentrate

Ï

Cl–

Na+Na+

OH–

( – )Cathode

( + )Anode

H+

Cl–

¶¶

CONTINUOUS ELECTRODEIONIZATION (CEDI)

Continuous Electro Deionization (CEDI) is a continuous process for producing

high-purity water without the problems and costs associated with regeneration

chemicals and waste neutralization. It is used to further deionize RO product

water and remove carbon dioxide, silica and total organic carbon (TOC). CEDI

systems use ion exchange membranes, ion exchange resins and electricity to

produce consistent high-quality water with no regeneration downtime. When

fed with RO product water, CEDI systems achieve better than 99.5% salt

removal and produce up to 18.2 mΩ-cm (0.055 micromho/cm) resistivity

quality water.

How a CEDI system works:

¶ Feedwater entering the system flows inside resin/membrane product and

concentrate compartments. The feed stream flows parallel to the membrane

surface.

Ë Resins capture dissolved ions.

Ì Electric potential drives captured cations through the cation membranes and

captured anions through the anion membranes.

Í Cation-permeable membranes transport cations out of the diluting

compartment, but prevent anions from leaving the concentrate

compartment.

Î Anion-permeable membranes transport anions out of diluting compartment,

but prevent cations from leaving the concentrate compartment.

Ï Waste stream removes concentrated ions from the system.

Ð Product water leaves the system.

DEALKALIZATIONDealkalizers remove alkalinity from feedwater for process, boiler feed (low-

pressure boilers) and cooling-tower applications. Chloride cycle dealkalizers use

strong-base anion ion exchange resins that are regenerated with salt to remove

bicarbonate, carbonate, sulphate and nitrate ions from high alkalinity waters by

exchanging them for chloride ions. Split stream dealkalizers “split” the feedwater,

so a portion goes to the hydrogen-form cation resin unit, converting all alkalinity

to carbon dioxide, and the other portion to the sodium-form cation resin unit

(softening). The effluents of both units are then re-joined to produce dealkalized

water.

WATER TREATMENT TECHNOLOGIES




DEGASIFICATION/DEAERATIONDegasification, or gas stripping, removes undesirable dissolved gases, such as

oxygen, carbon dioxide, ammonia and hydrogen sulfide from water. The gases are

removed by exposing the water to a vapor phase that is missing the gases to be

eliminated. Degasification equipment is classified as ebullition, tray or drip and

spray type units.

One type of drip degasifer is the forced draft degasifer, which removes dissolved

gases from water without changing its ambient temperature. Forced draft

degasifiers are particularly useful for eliminating carbon dioxide formed by the

acid used to adjust raw water alkalinity prior to reverse osmosis treatment. They

also reduce hydrogen sulfide and other dissolved gases in water, and may be

used to oxidize dissolved iron and manganese for subsequent removal by a filter

or clarifier. In this type of operation, they are commonly referred to as aeration

units since they add oxygen to the water for oxidation.

DEIONIZATIONDeionization removes dissolved minerals and salts, as well as some dissolved organics,

from water using the process of ion exchange. During ion exchange, certain ions of a

given charge are replaced (or exchanged) with different ions of the same charge.

These replacement ions are provided by ion exchange resins.

Positively charged ions in the water (cations), such as calcium, magnesium and

sodium are removed by cation exchange resins and replaced with hydrogen ions.

Negatively charged ions (anions), such as chloride, nitrate and sulfate are removed

by anion exchange resins and replaced with hydroxide ions. The hydrogen and

hydroxide ions then unite to form water molecules.

Deionization is conducted in pressure vessels containing the ion exchange resins.

Typical deionization systems consist of separate cation and anion vessels connected

in series (called a separate bed or two bed). These systems produce water up to 1

megohm-cm quality. For higher purity water, a single vessel containing a mixture of

cation and anion resins (called a mixed bed) is employed. Mixed bed deionizers can

produce water up to 18 megohm-cm quality.

11WATER TREATMENT TECHNOLOGIES




Service DeionizationService deionization (SDI) refers to portable deionization equipment that is designed

for off-site regeneration. A SDI system typically consists of a prefilter, activated

carbon and deionization (DI) tanks, interconnecting hoses, pressure gauges, a

pressure regulator and quality indicators. SDI systems may include separate bed

tanks, mixed bed tanks or a combination of the two, depending on the product

water quality requirements.

When the resins in the tanks reach exhaustion (are no longer capable of effective

ion exchange), the tanks are disconnected and replaced with tanks containing

freshly regenerated resins. The tanks containing the exhausted resin are transported

to a regeneration facility. With SDI, the customer does not make a major capital

investment, and does not handle hazardous regeneration chemicals (acids and

caustics).

Automatic DeionizationDeionizers that are regenerated at the customer site are referred to as automatic

deionizers (Auto DI). During regeneration, the cation resin is treated with acid,

usually hydrochloric acid, and the anion resin is treated with caustic. Automatic

deionizers contain the necessary piping, valves and controls, water quality monitors

and alarms to regenerate the system when required.

DISTILLATION FOR WFIDistillation is a process whereby feedwater is vaporized at a pressure slightly

above atmospheric, leaving non-volatile impurities behind. The vapor passes

through a separator where heavier particles are raised. The vapor is then

compressed to a higher temperature and pressure. This high temperature vapor

transfers its latent heat to the feedwater as it condenses (leaving non-

condensables behind). Degassing of the distillate further increases the purity of

the water. The steam heats the water in the evaporators and the extra heat is

then recovered. Vapor compression distillation is often used in purified water

production to produce hot distillate in systems where the water is stored and

distributed at an elevated temperature (176˚F/80°C). Distillation removes salts,

colloids, particles, bacteria and pyrogens from water down to 10 parts per trillion

(ppt). It is used for producing Water for Injection (WFI) and USP Purified Water.




FILTRATION

Filtration removes solid matter and suspended impurities from a fluid stream by

passing it through a variety of devices, including microporous filters (which

include depth, screen and surface filters), ultrafiltration units, greensand,

activated carbon, diatomaceous earth and multimedia filters. Microporous filters

remove particles according to the filter’s pore size. They are often used before

other water purification equipment, such as deionization and reverse osmosis

systems, and are also used as polishing filters to remove resin and carbon fines,

colloids and microorganisms.

MicrofiltrationMicrofiltration, also known as surface, membrane, screen and absolute filtration,

uses microporous filters to remove particles and bacteria in the approximate

range of 0.05 to 10 microns. Microporous filter ratings correspond to the largest

hole or pore in the filter material matrix, which means anything larger will be

“absolutely” removed. Microporous filters are often used as “polishing” filters to

remove contaminants that were not removed by depth filtration.

Multimedia FiltrationMultimedia filters offer a highly efficient means of removing suspended

particulate matter from water. The three layers of media are selected for their

particular size, specific gravity and ability to trap particles of specific size ranges.

As water flows downward through the bed, it encounters layers of media with

decreasing porosity, so successively smaller particles are trapped in each layer,

providing true depth filtration. The filters provide high clarity water either for

direct use or for pretreatment to softeners, deionizers or reverse osmosis

systems.

Depth Filtration

Surface Filtration





NanofiltrationNanofiltration is a crossflow-membrane separation process that removes selected

salts, most organics and particles in the 300 to 1,000 molecular weight range.

Nanofiltration softens the water without the need for salt regeneration.

UltrafiltrationUltrafiltration uses membranes to retain undissolved and dissolved contaminants

that are larger than the nominal molecular weight cutoff rating (NMWC) of the

membrane (typically 5,000 to 500,000 daltons). Ultrafiltration removes particles,

colloidal silica, microorganisms and pyrogens.

REVERSE OSMOSISThe natural process of osmosis occurs when solutions with different

concentrations of salts are separated by a semi-permeable membrane. As

osmotic pressure drives water through the membrane, the water dilutes the more

concentrated solution until equilibrium is achieved. Reverse osmosis (RO) uses

external pressure to reverse the process of osmosis. The water is forced by this

external pressure through a semi-permeable membrane from a more

concentrated solution to a less concentrated one. The RO membrane allows the

water to pass through while retaining (or holding back) a large percentage of the

dissolved inorganics, organics, bacteria and pyrogens. The pure water collected

on the downstream side of the membrane is called the permeate or product

water. RO membranes remove 99% of the feedwater particles, colloids, bacteria,

pyrogens and organics greater than 200-300 molecular weight (MW) range, or

larger than the membrane’s pore size of 150 to 200 Ångströms. It removes 90-

99% of dissolved inorganics. The greater the ionic charge of the inorganic

contaminants, the more likely they will be removed by the RO membrane.

Membrane

Osmosis

Osmotic Pressure

PressureReverse Osmosis

RO Membrane




S3™ SYSTEMS3™ system is a patent-pending technology developed by Siemens Water

Technologies for high-purity water applications. S3™ technology is used to

produce purified water, non-compendial water or still feed water. The

technology improves upon proven active sanitization methods with a unique,

start/stop mode of operation. Conventional systems require continuous water

recirculation for microbial control, thereby wasting significant energy, water and

consumables. The Siemens’ S3™ process implements periodic short, high

temperature heat cycles of up to 80˚C prior to startup for water production. The

high temperature hold period is typically 5 minutes or less. The shortened heat

cycles result in water conservation and energy reduction when compared with

continuous recirculation methods. The water and energy cost savings often

significantly exceed the system capital cost over the lifetime of the system.

SANITIZATIONWater purification systems and filters can become contaminated by bacteria that

grow inside them. Although most water systems remove the majority of organic

material from the feedwater, gram negative bacteria are able to survive and

multiply in water that contains only small amounts of organic matter. The

bacteria eventually form a layer of biofilm on the water system surfaces, and this

biofilm continuously releases microbes into the water. Bacteria also forms

pyrogens that may elevate organic levels in the product water. For this reason,

proper sanitization of water systems is essential for optimum performance. The

frequency of sanitization and the method used depends on your specific

application.

Sanitization can be done either continuously or periodically with shock

treatments. Continuous sanitization keeps bacteria growth from recurring, while

shock treatments remove bacteria but do not prevent it from recurring.

Continuous sanitization is typically used when a constant level of sanitant is not

harmful to the end-user production process. Shock treatments usually involve

shutting down the production process, introducing sanitant into the system and

then flushing the sanitant from the system before it is placed back on-line.

Often, the water purification system must be cleaned before it can be sanitized.

Cleaning removes the biofilm from equipment surfaces, resulting in more effective

sanitization. Some common chemical sanitants are chlorine (liquid and gas),

chloramines, chlorine dioxide (ClO2), hydrogen peroxide (H2O2), peracetic acid

(CH3COOOH), ozone (O3) and formaldehyde (HCHO). Physical treatments include

heat and ultraviolet (UV) light.





SOFTENINGSoftening removes hardness minerals, such as calcium and magnesium from

water. Water softeners are commonly used as pretreatment for boiler feed make-

up water systems to prevent calcium and magnesium scale formation in boilers.

They are also used to remove dissolved iron from water.

Ion exchange water softening replaces or exchanges the calcium and

magnesium cations with an equivalent number of sodium cations.

Hot process softening removes hardness by heating the water to near boiling,

followed by the introduction of softening chemicals, such as hydrated lime and

soda ash. The minerals then precipitate and settle toward the bottom of the tank,

forming a sludge blanket. As the treated water flows through the sludge blanket,

most of the turbidity is trapped and removed. The effluent is then passed

through filters that remove the last trace of suspended matter.

Cold lime softening is similar to hot process softening, except the water is not

heated before lime is introduced into the system. This process is carried out in a

specially designed clarifier.

Softeners can be regenerated co-current (downflow) or counter-current

(counterflow). Co-current is when the regenerant chemical and service flows are

in the same direction.

Counter-current is when the service and regeneration chemical flows are in the

opposite direction. Counter-current operations provide lower hardness leakage

when operated properly.

ULTRAVIOLET STERILIZATIONUltraviolet (UV) sterilization is used as a pretreatment and/or post-treatment step

to kill or inhibit growth of microorganisms, remove ozone, chlorine and trace

organics and reduce total organic carbon (TOC). In UV sterilization, the water is

exposed, at a controlled rate, to ultraviolet light waves. Ultraviolet is the band of

light located in the spectrum between 2000 and 3000 Ångström wavelengths.

The most effective range for destroying bacteria is at 2537 Ångström (254

nanometers). The bacteria absorb the UV radiation energy, which destroys or

inactivates their DNA, thus preventing the bacteria from reproducing. UV systems

may reduce 99% of bacteria in the water.

Water Softening

Ca+Mg+

Cation Resin

Na+

Brine Tank

Section Table of ContentsBACK Main Table of ContentsBACK

Products

T A B L E O F

C O N T E N T S

17

BACK

ACTIVATED CARBON FILTERSKF Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20VP Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21CT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22HOT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

ACTIVATED CARBON MEDIA . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24ANALYTICAL ANALYZERS, TEST KITS, SAMPLING DEVICESAnalyzers

Silica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Chlorine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Dissolved Solids . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Hydrometer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Microbiological Analysis Monitors . . . . . . . . . . . . . . . . . . . . . . . . . . 25Portable TOC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Test KitsFouling Index. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25Alkalinity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Carbon Dioxide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Chlorine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Hardness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Iron . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26pH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26Silica . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26RO Water Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Sampling DevicesBacteria Samplers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27ESP Sanitary . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

BAG FILTERSFilter Bags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29Housings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

CARTRIDGE FILTERSCartridge End Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Activated Carbon FiltersGranular Activated Carbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33Pulverized Activated Carbon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Particulate CartridgesDI Gard™ String Wound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35ROGARD™ Graded Density Polypropylene . . . . . . . . . . . . . . . . . . . 36Prepure DP™ Graded Density Polypropylene Depth . . . . . . . . . . . . . 37NT Series Graded Pore Polypropylene Depth. . . . . . . . . . . . . . . . . . . 38Postpure PP™ Graded Density Pleated Polypropylene Depth . . . . . 39NA Series Absolute Rated Polypropylene Depth. . . . . . . . . . . . . . . . . 40WN Series Pleated Polysulfone Membrane. . . . . . . . . . . . . . . . . . . . . 41


18

BACK

DEAERATORSPermutit® SLH Dearating Heaters. . . . . . . . . . . . . . . . . . . . . . . . . . 85

DEGASIFIERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86DEIONIZATION

Recirculating Systems. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87VP Series Two Bed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88VP Series Mixed Bed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89VP Series Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

DIALYSIS (HEMODIALYSIS)Bicarbonate Mixing System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91Med-RO® Reverse Osmosis Medical System – RX Series . . . . . . . . 92

GAUGESPressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95

HIGH PURITY WATER SYSTEMSPureFit® High Purity Water Treatment Systems . . . . . . . . . . . . . . . . 96

ION EXCHANGE RESINS AND FILTER MEDIAUSF™ Ion Exchange Resins . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98Filter Media and Activated Carbon . . . . . . . . . . . . . . . . . . . . . . . . . . . 99Resin Cross Reference Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

ION EXCHANGE WASTEWATER SYSTEMS . . . . . . . . . . . . . . . . . . . 102Aquasaver Chemical Feed And Pump Skid. . . . . . . . . . . . . . . . . . . . 103

LABORATORY WATER PURIFICATION SYSTEMSUltrapure Water Systems

PURELAB® Ultra Water Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 104PURELAB® Classic Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 106PURELAB® UHQ Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 108MODULAB® High Flow Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . 109

General Grade Water SystemsPURELAB® Option-S 7/15/30/60 Water Systems . . . . . . . . . . . . . . 110PURELAB® Option-R 7/15/30/60 Systems . . . . . . . . . . . . . . . . . . . 112PURELAB® Option-Q 7/15 Systems . . . . . . . . . . . . . . . . . . . . . . . . 114

Primary Grade Water SystemsPURELAB® Prima 7/15/20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116PURELAB® Prima 30/60/90/120 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118Centra Packaged Central Water Systems . . . . . . . . . . . . . . . . . . . . . 120

Medica Water Systems for Clinical AnalyzersMEDICA® S/R/D 7/15 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122MEDICA® Pro 30/60/120 Systems . . . . . . . . . . . . . . . . . . . . . . . . . . 124MEDICA® R-200 (High Volume) Systems . . . . . . . . . . . . . . . . . . . . 126

Deionization SystemsPortable Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128Disposable Deionization System . . . . . . . . . . . . . . . . . . . . . . . . . . . . 129Recirculating Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130

Modular Docking Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131Storage Reservoirs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132Accessories

Carboys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133Faucets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134

Products, continued

WE Series Pleated Polysulfone Membrane . . . . . . . . . . . . . . . . . . . . 42

DI Series Pleated Hydrophilic PVDF Media . . . . . . . . . . . . . . . . . . . . 43

PV Series Pleated Hydrophilic PVDF Media . . . . . . . . . . . . . . . . . . . . 44

VH Series Pleated PES Media Pharmaceutical Grade. . . . . . . . . . . . 45

UF Series Hollow Fiber Polysulfone Media . . . . . . . . . . . . . . . . . . . . . 46

Housings

316 Stainless Steel, Single Tube (Code F) . . . . . . . . . . . . . . . . . . . . . 47

316L Stainless Steel, Single Tube (Code O) . . . . . . . . . . . . . . . . . . . . 48

316L Electropolished Stainless Steel, Multi-tube. . . . . . . . . . . . . . . . . 49

316L Stainless Steel, Multi-tube (High-Purity) . . . . . . . . . . . . . . . . . . . 50

316 Stainless Steel, Multi-tube . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51

304 Stainless Steel, Multi-tube (with V Clamp closure). . . . . . . . . . . . 53

304 Stainless Steel, Multi-tube (with Swing Bolt closure). . . . . . . . . . . . 54

Polypropylene Plastic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55

White Polypropylene Plastic (Dialysis) . . . . . . . . . . . . . . . . . . . . . . . . . 56

Natural Polypropylene Plastic. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57

Speciality Cartridges

CLERIFY™ Oil Adsorption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58

Vent Filter Cartridges

Hydrophobic PTFE Media. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59

EA Series Hydrophobic Polypropylene Media . . . . . . . . . . . . . . . . . . . 60

VA Series Hydrophobic PTFE Media . . . . . . . . . . . . . . . . . . . . . . . . . . 61

VP Series Hydrophobic PTFE Media . . . . . . . . . . . . . . . . . . . . . . . . . . 62CHEMICAL FEED SYSTEMS AND ACCESSORIES

Pre-Kitted . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 63Dual Pump Skidded - Grundfos . . . . . . . . . . . . . . . . . . . . . . . . . . 64Dual Pump Skidded - LMI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65Polymer Feed . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66

Metering PumpsChem-Tech® Metering Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . 67LMI® Metering Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 68Pulsatron® Metering Pumps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69Pulsatron® Plus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 70Chem-Ad® LX Diaphram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71Encore® 700 Diaphram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72Chemtube® PPS Peristaltic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73

Instrumentation & Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74Storage and Bulk Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79CLARIFIERS

Permutit® Package Precipitators . . . . . . . . . . . . . . . . . . . . . . . . . . 80CLEAN-IN-PLACE SKIDS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81CONTINUOUS DEIONIZATION SYSTEMS

CDI-LX™ Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 82CDI® Replacement Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83

CONTROL PANELS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84


19

BACK

Products, continued

TOTAL-CHECK™ 900 total organic carbon Monitor . . . . . . . . . . . . . 135Remote Control Stations. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 136Remote Dispense Gun . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137

Point-of-Use Capsule Filters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138IWT® Filtration Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139Replacement Cartridges

Siemens, USFilter®, ELGA® Lab Water Systems . . . . . . . . . . . . . . 140Millipore® Lab Water Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 144Barnstead® Lab Water Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146

LEAK DETECTORSDI-SDI ALERT® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 149WLD Model 300A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150

LIGHTS, QUALITY INDICATOR5-Range Purity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151Hy-Lite Water Quality Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152

LIQUID LEVEL CONTROLSTank Level Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 153

METERSConductivity & Resistivity Meters . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154Total Organic Carbon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155

MULTIMEDIA FILTERSAVGF® Gravity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156KF Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 157VP Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 158

PUMPS, CENTRIFUGALMultiple Stage Centrifugal/Victaulic Booster . . . . . . . . . . . . . . . . . . . 159Multiple Stage Centrifugal/ANSI Flange Booster. . . . . . . . . . . . . . . . 160Feedwater Booster . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 161

REVERSE OSMOSIS MEMBRANESReplacement Membranes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 162Siemens Proprietary Membranes for Obsolete Systems . . . . . . . . . 163

REVERSE OSMOSIS SYSTEMSVantage™ MicRo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 164Vantage™ M21 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 165Vantage™ M41 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 166Vantage™ M43 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 169Vantage™ M83 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 170Vantage™ M84 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 171Pharm 40 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17640 Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 177Vantage M240 Two Pass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 178Vantage M280 Two Pass. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179BevMAX™. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 180

SERVICE DEIONIZATION (SDI)SDI Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 182

SOFTENERSKF Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185KF Series Twin Alternating Softeners. . . . . . . . . . . . . . . . . . . . . . . . . 186KF Series Duplex Alternating Softeners. . . . . . . . . . . . . . . . . . . . . . . 187

VP Series. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 188STORAGE TANKS

Polyethylene, Conical Bottom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 190Fiberglass, Dish-Bottom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 191Polyethylene, Flat Bottom. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 192TerraPure. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193

SYSTEM, EPV™ VALIDATABLE SKIDDEDEPV™ Validatable Skidded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 194

SYSTEM, PreVUE® AND APEX™ VALIDATED SKIDDEDPreVUE® Validated Skidded . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 196APEX™ Systems . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 198

TEMPORARY MOBILE WATER TREATMENTMobile Demineralization . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 199Mobile Clarification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200Mobile Reverse Osmosis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201PreFlex® Skid-Mounted Pretreatment Systems . . . . . . . . . . . . . . . . 202FlexTrex® Skid-Mounted Deionization Systems . . . . . . . . . . . . . . . . 203FlexRO® Skid-Mounted RO Systems . . . . . . . . . . . . . . . . . . . . . . . . 204

ULTRAVIOLET STERILIZERSZCS Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205ZHX Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 206ZCT Series . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 207Replacement UV Monitoring for Aquafine® Series UV . . . . . . . . . . . 208Ultraviolet Light Traps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 210

VALVES/REGULATORSBlend . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211Pressure Relief . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 211

WASTEWATER CAPABILITIES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 212SUPPORT SERVICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 215WATER QUALITY STANDARDS AND CONVERSIONS . . . . . . . . . . . 231GLOSSARY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 246TRADEMARK STATEMENT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 253


20 ACTIVATED CARBON FILTERS

KF Series Carbon FiltersFlow Rates from 1 to 81 gpm



KF Series Carbon Filters are ideal for commercial and light industrial filtration

applications where the advantages of a lightweight, corrosive-resistant FRP

pressure vessel and cost-effective top mounted valve are desirable.

• For pharmaceutical, cosmetic, microelectronic, boiler feed, process water,

laboratory applications and more

• Tanks are blow-molded plastic, wrapped with high-strength fiberglass and

contain epoxy resin for worry-free service

• Dependable motorized control valve is included with each filter

• Electromechanical timer allows automatic backwash

• Pretreatment lock-out switch assembly is included to deactivate downstream

equipment during backwash

SYSTEM SPECIFICATIONS

Chlorine Organics

Tank Size Pipe Commercial* RO-Feed** Commercial* RO-Feed** Backwash Media Overall Shipping(D x H in) Size Service Service Service Service Flow Vol Dimensions Weight

(in) Flow Flow Flow Flow (ft3) LxDxH (in) lb (kg)

10x40 1.0 3 gpm 2 gpm 1 gpm 1 gpm 5 gpm 1.0 10x10x50 100 (46)12x52 1.0, 1.5 6 gpm 4 gpm 2 gpm 2 gpm 8 gpm 2.0 12x12x63 140 (64)

14x65 1.0, 1.5 9 gpm 6 gpm 3 gpm 3 gpm 10 gpm 3.0 14x14x76 210 (96)




24x72 2.0 24 gpm 16 gpm 8 gpm 8 gpm 30 gpm 8.0 24x24x90 1190 (540)



42x72 3.0 81 gpm 54 gpm 21 gpm 27 gpm 90 gpm 27.0 42x42x110 2000 (907)Electrical Requirements . . . . . . . . . . . 110 V/1 ph/60 Hz – 10 watts

*Flow is based on 3.0 gpm/ft3 for chlorine removal. Flow is based on 1 gpm/ft3 for organic reduction.**Dechlorination flow is based on 2 gpm/ft3, and assumes inlet Cl2 < 3 ppm; outlet Cl2 ≤ 0.1 ppm; inlet turbidity < 5 NTU. Organic reduction flow isbased on 1 gpm/ft3, and assumes inlet TOC ≤ 5 ppm as O2 consumed; inlet turbidity < 5 NTU.

ORDERING INFORMATION

Catalog Number: KFZCS XXX F X Z F X X

System Name . . . . . . . . . . . . . . . KFZCS 010, 012, 014,016, 018, 021,

Pressure Vessel Diameter (in inches). . . . . . . 024, 030, 036, 042Pressure Vessel Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F = non-code, fiberglassControl Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X = NEMA3R equivalent A = 1"Level of Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Z = Stand alone B = 1.5"Backwash/Regeneration Initiation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F = Timeclock, NEMA 3R equivalent C = 2"Inlet/Outlet Pipe Size† . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E = 3" X = No Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Option

To determine your catalog order number, replace the X with one of the numbered options below it.These filters are also available as duplex units. Please contact our Technical Support team for more information.†All sizes are not available with every tank size. In accordance with Siemens policy for continual product development and improvements, we reserve the right to change the product information within this literature at any time, without notice.

Requires fieldassembly

21ACTIVATED CARBON FILTERS

VP Series Carbon FiltersFlow Rates from 8 to 300 gpm




VP Series Carbon Filters are a low cost, reliable and efficient way to purify water.

These rugged, pre-engineered, pre-assembled units minimize installation and start-

up costs and are ideal for boiler feed, process water or rinse water applications.

• VPEC denotes Non-ASME code vessels offered with express delivery

• VPAC denotes ASME code vessel with stamp available

• Simple design maximizes reliability and efficiency

• 100 psig vessel rating offers added strength and integrity

• Structural steel (seismic zone 4) legs provide rigid support of vessel for safety

• Skid mounting with (seismic zone 4) structural steel beams for duplex systems

• Backwash and regeneration controls are highly reliable

• Optional metallic piping ensures long life and durability

• Standard epoxy internal and external coating extend vessel life

• Schedule 80 PVC piping enhances corrosion-resistanceSYSTEM SPECIFICATIONS

Model Number . . . . . . . . . . . . . . . . . . . . . . . VPEC/VPAC-024 VPEC/VPAC-630 VPEC/VPAC-636 VPEC/VPAC-742Flow Rates

Good . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 48 72 96Better . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16 24 36 48Best . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 12 18 24

Backwash Flow Rate . . . . . . . . . . . . . . . . . . 31 49 71 96Rinse Flow Rate . . . . . . . . . . . . . . . . . . . . . . 19 29 42 58Media (cubic feet) . . . . . . . . . . . . . . . . . . . . . 8 12 18 24System Dimensions*Pipe Size . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/2” 1-1/2” 2” 2”Column Size (D x H)

inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 x 48 30 x 60 36 x 60 42 x 72cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61x122 77x153 92x153 107x183

H x W x D Simplex (Duplex) – inch . . . . . . . 76x43x41 (80x97x41) 90x43x48 (94x97x48) 96x45x54 (100x97x54) 112x47x58 (116x133x58)cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 193x110x104(204x247x104) 229x110x122 (239x246x122) 244x114x137 (254x246x137) 285x119x147 (295x338x147)

Shipping Weightlb. – Simplex (Duplex) . . . . . . . . . . . . . . . . 1,000 (2,000) 1,380 (2,760) 2,190 (4,380) 3,160 (6,320)kg – Simplex (Duplex) . . . . . . . . . . . . . . . . 454 (908) 626 (1,252) 994 (1,987) 1,433 (2,866)

Operating Weightlb. – Simplex (Duplex) . . . . . . . . . . . . . . . . 1,800 (3,600) 2,580 (5,160) 4,340 (8,680) 6,090 (12,180)kg – Simplex (Duplex) . . . . . . . . . . . . . . . . 817 (1,633) 1,171 (2,341) 1,969 (3,938) 2,762 (5,524)

Electrical Requirements . . . . . . . . . . . . . . . 110 V / 60 Hz / 1 ph / 3 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Model Number . . . . . . . . . . . . . . . . . . . . . . . VPEC/VPAC-648 VPEC/VPAC-754 VPEC/VPAC-760 VPEC/VPAC-772Flow Rates

Good . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 160 200 300**Better . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64 80 100 150Best . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32 40 50 75

Backwash Flow Rate . . . . . . . . . . . . . . . . . . 126 159 196 283Rinse Flow Rate . . . . . . . . . . . . . . . . . . . . . . 75 95 118 170Media (cubic feet) . . . . . . . . . . . . . . . . . . . . . 32 40 50 75System Dimensions*Pipe Size . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1/2” 3” 3” 3”Column Size (D x H)

inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 x 60 54 x 72 60 x 72 72 x 72cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122x153 139x183 153x183 183x183

H x W x D Simplex (Duplex) – inch . . . . . . 106x54x65 (110x132x66) 121x61x75 (127x158x75) 125x64x81 (131x158x81) 129x72x93 (136x158x93)cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 269x137x165 (279x335x168) 307x155x191 (323x401x191) 318x163x206 (333x401x206) 328x183x236 (345x401x236)

Shipping Weightlb. – Simplex (Duplex) . . . . . . . . . . . . . . . . 4,040 (8,080) 5,550 (11,100) 7,065 (14,130) 10,210 (20,420)kg – Simplex (Duplex) . . . . . . . . . . . . . . . . 1,833 (3,666) 2,517 (5,034) 3,205 (6,410) 4,631 (9,262)

Operating Weightlb. – Simplex (Duplex) . . . . . . . . . . . . . . . . 7,940 (15,880) 10,570 (21,140) 13,275 (26,550) 19,200 (38,400)kg – Simplex (Duplex) . . . . . . . . . . . . . . . . 3,602 (7,204) 4,794 (9,588) 6,021 (12,042) 8,709 (17,418)

Electrical Requirements . . . . . . . . . . . . . . . 110 V / 60 Hz / 1 ph / 3 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

ORDERING INFORMATIONVP Series Carbon Filters have extensive option packages. For ordering instructions, or additional product information, please contact technical support at 800.875.7873 extension 5000.* Approximate** Rating for metallic piping only. Plastic piping requires aeration due to line velocities.In accordance with Siemens policy for continual product development and improvements, we reserve the right to change the product information within this literature at any time, without notice.


A complete line of standard carbon tower units designed for the beverage industry or any

application that can utilize hot water or steam sanitization for dependable operation. The CT

Series designation refers to beverage grade carbon towers with stainless steel pressure vessels,

face piping and internal distributors. The units are available with programmable logic controllers

(PLC) or manual operation. Carbon media and other optional equipment can be easily selected

and ordered to address your specific requirements.

• For pretreatment applications requiring removal of chlorine, chloramine, and many types oforganic contaminants

• Vessels are designed for hot water sanitization and steam vapor stripping/sanitization, bottomand/or top entry, for removing VOC’s such as trihalomethanes

• Standard system is based on 1 gpm/ft3 and a backwash rate near 2 gpm/ft3 (dependent uponcarbon density and particle size)

• Uses advanced well screen internals to guarantee uniform distribution during draw-off and backwashing

• Units available with PLC or manual operation

• Vessels, piping and internals available in 316L or 304 stainless steel combinations

• Full Drainability using scavenger screen ensures continuous complete removal of condensate during steaming

• Higher flow systems, manway types, temperature and control probes, special carbon attributes, sampling ports, and finishes canbe customized with minimal impact on delivery and cost

22 ACTIVATED CARBON FILTERS

CT Series Carbon TowersFlow Rates from 57 to 382 gpm


SYSTEM SPECIFICATIONSModel Number CT050 CT100 CT150 CT200 CT250 CT300 CT350

Service Flow Rate . . . . . . . . . . . . . . . . . . 57 gpm 118 gpm 170 gpm 231 gpm 265 gpm 302 gpm 382 gpmBackwash Flow Rate*. . . . . . . . . . . . . . . . <96 gpm <196 gpm <283 gpm <385 gpm <442 gpm <503 <636 gpmMedia Volume of Carbon (cu. ft.) . . . . . . . 57 118 170 231 265 302 382Shell Diameter . . . . . . . . . . . . . . . . . . . . . 42" 60" 72" 84" 90" 96" 108"Carbon Bed Depth . . . . . . . . . . . . . . . . . . >5’ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Freeboard Above Carbon . . . . . . . . . . . . . >50% . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Design Pressure . . . . . . . . . . . . . . . . . . . . 65 or 100 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Valves . . . . . . . . . . . . . . . . . . . . . . . . . . . . Automated (PLC) or Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Underdrain System. . . . . . . . . . . . . . . . . . Well Screens . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manway . . . . . . . . . . . . . . . . . . . . . . . . . . Top. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical Requirements . . . . . . . . . . . 120 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . *At 10 gpm/ft2 and depends on carbon density and particle size.


Catalog Number: CT 050 A 6 6 A

System Name . . . . . . . . . . . . . CT 050, 100, 150,Model Number . . . . . . . . . . . 200, 250, 300, 350

A = 100 psiDesign Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B = 65 psi 6 = 316L VesselVessel Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 = 304 Vessel 6 = 316L PipingPiping Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 = 304 Piping A = Automatic OperationValves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . M = Manual Operation

In accordance with Siemens policy for continual product development and improvements, we reserve the right to change the product information within this literature at any time, without notice.


Valve Kits: For integration of the HOT Series System with existing 5 valve carbon towers, 2 additional valves are necessary for proper interconnection. The part numbers below are for a kit of 2valves. Order 1 kit for each existing carbon tower that the HOT System will be used with.

It is critical to consider the HOT Series System must work in conjunction with either a new or an existing carbon tower that is rated for a minimum of 65 PSI andequipped with ASME pressure relief valves.

The HOT Series is intended for applications with both new or existing carbon towers. The backwash flow rates and pump sizing of the HOT Series system arebased on the CT Series carbon towers. Some older, existing carbon towers utilize a 2’ bed depth or a wider, stockier vessel. This would change the requiredflow rates of the backwash and sanitization steps of the HOT process. HOT Series systems can be incorporated witheither style of carbon tower. A Siemens Applications Engineer will ensure the HOT Series system is sized correctly for retrofit vessels.In accordance with Siemens policy for continual product development and improvements, we reserve the right to change the product information within this literature at any time, without notice.

23ACTIVATED CARBON FILTERS

Heat Optimized Technology“HOT” Series Systems for Carbon TowersFor use with new or existing carbon towers



ORDERING INFORMATIONCatalog No.: 67/HOT 250 T A CHeat Optimized Technology System . . . . . . 67/HOTFlow Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 - Backwash: 96–283 GPM

(For Siemens CT050, CT100, and CT150)250 - Backwash: 284– 442 GPM

(For Siemens CT200 and CT250) T - SS Tubing with Threads, 350 - Backwash: 443–636 GPM Flanges and Tri-clamps

(For Siemens CT300 and CT350) S - SS Tubing with Tri-clampsPiping Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . only, 180 grit ID polish 2 - 208/240 VAC, 3 Phase, 60 HzElectrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 - 480 VAC, 3 phase, 60 Hz Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A - Automatic C - Cooling

Exchanger Included

N - No Cooling Cooling Exchanger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Exchanger

Bacteria in production water and biofouling of water treatment systems can create operationalchallenges for Beverage and BioPharm manufacturers. To meet these challenges, the “HOT”Series systems were introduced. HOT technology is a Siemens patented process that providesthorough sanitization of new or existing carbon towers, reduces backwash water by up to 75%,and adds process control. HOT Series systems use hot water to eliminate the potential for bedcontamination that can exist from utilizing plant steam. A HOT Series system can be providedindependently, with or without an optional chilling exchanger, or as a complete systemincluding carbon towers and ancillary equipment.

• Field proven to provide more effective microbial kill than conventional steaming processes• More thorough kill lessens the bacteria counts, to significantly increase periods between sanitizations• Available with fully automated or manual operation• All stainless steel skid and process piping• Fully wired and hydrostatically tested prior to shipment• Less biofouling and cleaner carbon significantly increase carbon performance and substantially reduce costs• The heating system is capable of sanitizing the loop distribution piping and polishing equipment for improved operations• Bacteria control is improved due to uniform heating of the carbon bed in the expanded state with reduced potential for cold

spots during sanitization.

Comparison Of Heat Sanitization Techniques Within A Single 84” Diameter Carbon TowerTime Conventional Steaming HOT Series Systems HOT Series with

Optional Chilling Exchanger

Backwash to Drain (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 5 5Backwash Recycle & Heat (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . — 60 60Heat-Up (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240 — —Hold Time (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 – 60 — 15 – 30Cool Down (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480 480 60Rinse to Drain (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 5 5Total Time (Minutes) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 805 550 160

(Hours) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.4 9.2 2.2Operator Attention (Hours) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 0.5 0.5Total Water Used (Gallons) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13,800 4,500 4,500

Beverage manufacturers who have extremely low bacteria specifications are utilizing loop configuration water distribution systems to keep the water moving more effectively than “deadended” systems. The heating system included with the HOT Series Systems can serve double duty by sanitizing the loop distribution piping and polishing equipment as well.

24



ACTIVATED CARBON MEDIA

Activated Carbon Media

Siemens Water Technologies is a national provider of complete turnkey carbon services.

We inventory a full line of premium Westates® activated carbons made from high

quality bituminous coal, coconut shell and anthracite coal raw materials. Applications

for activated carbon include improving the taste and quality of drinking water, treating

industrial wastewater, purifying materials used in production processes, controlling air

emissions, and filtering contaminants out of groundwater in environmental cleanup

sites. Our laboratory analyzes and certifies the quality of all the activated carbon

supplied through an extensive QA/QC program. Our strategically located service centers

allow for efficient and prompt delivery and service.

Applications• Chlorine removal

• Chloramine removal

• VOC control from air strippers, soil vapor extraction and air sparge systems

• Remediation

• Solvent Recovery

• Odor Control

• Trace Organics

• Disinfection By-products

Westates® Activated Carbon Products• Vapor Phase Carbons

• Liquid Phase Carbons

• Bulk Carbons

• Coconut-Shell Carbons

• Bituminous Coal Carbons

• Impregnated Carbons

• Anthracite Carbons

• Midas® Odor Control Media

• VoCarb® Carbon

• AquaCarb® Carbon

Midas® Odor Control Media (OCM)Midas® OCM is a breakthrough in odor control. Unlike any other odor control media,

Midas OCM is manufactured in a special process combining selected active ingredients

and premium quality bituminous coal to produce an extraordinarily high H2S

breakthrough capacity. This odor control media is not impregnated and therefore does

not suffer the serious drawbacks associated with alkali-impregnated carbons. The lack of

impregnant means all of Midas OCM’s pore volume and surface area are available for

storing the sulfur produced during the catalytic oxidation of H2S and for the adsorption of

any VOCs that may be present in the gas stream. And, since Midas OCM is not

impregnated, it is safer to load, start-up and remove from an adsorber system.

For a complete list of our Activated Carbon Turnkey Services, see page 216.

25




ANALYTICAL TEST KITS, ANALYZERS, SAMPLING DEVICES

Analyzers, Test Kits, Sampling Devices

FOULING INDEX TEST KIT (SILT DENSITY INDEX)Used to measure the amount of colloidal particulate matter in a water stream,includes a filter disc holder, pressure regulator, pressure gauge, tweezers, filter discs,valves and fittings. Also required, but not included, is a timing device (stop watch, orwrist watch with a second hand). Measurement is made by passing the stream ofwater at a constant pressure through the filtration disc for a predetermined amountof time.

SILICA ANALYZERFully automated, continuous silica monitor measures silica in a single stream ofwater in the 0-100 ppb range. The monitor uses a silica molybate colorimetricprocedure to measure resistive silica. Sulfuric acid and ammonium molybdate areadded to the water sample, forming molybdosilica acid. Oxalic acid is used toreduce the molybdosilica acid to a molybdenum blue complex, which ismeasured photometrically at 810 nm. The silica analyzer requires 115V AC foroperation, and comes with a one month supply of all necessary reagents,calibration solutions, and replacement tubing harness.

CHLORINE ANALYZERDesigned to provide an alarm signal when the total available chlorine in a watersample exceeds a preset limit. Has a 0.5 mg/L range, 0.01 mg/L resolution, andautomatic color/turbidity compensation. Uses the DPD colorimetric method tomeasure free chlorine.

HARDNESS MONITORDesigned to provided an alarm signal when the total hardness in the watersample exceeds a preset limit. The alarm trip point for this detector is 2 mg/L. Theunit performs an analysis every two minutes. The hardness monitor uses abuffered colorimetric indicator to detect total hardness. A color is developedfollowing the addition of an indicator reagent and a buffer in precise proportions.Color development is monitored by a colorimetric photometer. Three consecutive“hard” indications are required before an alarm circuit is activated; two before thealarm is cancelled. All reagents are included in the initial kit.

DISSOLVED SOLIDS METERHand-held analog meter measures three ranges of dissolved solids (0-50, 0-500and 0-5000 ppm) and features automatic temperature compensation, and abuilt-in cell cup that contains self-maintaining electrodes that never needreplatinizing.

DUAL SCALE UNIVERSAL HYDROMETERMeasures the density of liquids both lighter and heavier than water. This plainform hydrometer is 15" (38cm) long, with a specific gravity range of 0.700 to2.00 (Baume 10 to 70° light, 0 to 70° heavy).

MICROBIOLOGICAL ANALYSIS MONITORS, 37mmTwo-piece disposable monitor for microbiological analysis of samples by eithervacuum filtration or for use with an ESP sampling valve. The 0.45 mm pore sizefilter is grid marked to aid in counting colonies grown on the surface.

ANATEL® A1000 S20P PORTABLE TOC METERRugged unit combines a sensor with controller, printer and carrying handle forconvenient portability within your water system. This unit provides TOC analysisto 0.05 ppb without the inconvenience of acids, oxidants, and gases.


Catalog No. Description

ZWRQ03275 Fouling Index Test Kit

METSI6000001 Silica Analyzer

METCL4678002 Chlorine Analyzer

HDREGTKIT Hardness Monitor ReplacementReagent Kit

METCDML532T1 Dissolved Solids Meter

METHY0828720 Dual Scale Universal Hydrometer

MHWG 037 00 Microbiological Analysis Monitor,white grid 50/pk

ZTOCA1S20P Anatel® A1000 S20P Portable TOC Meter

METHD4270002 Hach® Hardness Monitor

26 ANALYTICAL TEST KITS, ANALYZERS, SAMPLING DEVICES

Analyzers, Test Kits, Sampling Devices



ALKALINITYUse a drop count titration method for the measurement of carbonates, bicarbonates,hydroxides, and other dissolved salts. In this kit an indicator is added to the sample, andthen a dropper is used to add the titrant until the color changes. Kit includes enoughreagents to perform approximately 100 phenolphthalein and 100 total (as CaCO3) tests.

CARBON DIOXIDEUse a drop count titration method for the measurement of carbon dioxide. An indicatoris added to the sample, and then a dropper is used to add the titrant until the colorchanges. Kit includes enough reagents to perform approximately 200 tests.

CHLORINE - LOW RANGEUse a color disk that features a continuous-gradient color wheel for fast, accuratecomparisons for chlorine measurement. The color wheel is simply rotated to obtain acolor match with the treated sample. Each kit includes enough reagents to performapproximately 100 tests.

CHLORINE - MID AND HIGH RANGEUse a drop count titration method to measure chlorine. An indicator is added to thesample, and then a dropper is used to add the titrant until the color changes. Kitmeasures total chlorine in the range of 10-200 mg/L. Kit includes enough reagentsto perform approximately 100 tests.

HARDNESSUse a drop count titration method for the measurement of calcium and magnesium. Anindicator is added to the sample, and then a dropper is used to add the titrant until thecolor changes. Kit measures total hardness at CaCO3 in the range of 1-20 mg/L. Kitincludes enough reagents to perform approximately 100 tests.

IRONUse a color disk that features a continuous-gradient color wheel for fast, accuratecomparisons for iron measurement. The color wheel is simply rotated to obtain a colormatch with the treated sample. Kit measures Fe in the range of 0-5 mg/L. Each kitincludes enough reagents to perform approximately 100 tests.

pHMost natural waters range from pH 4 to pH 9. Uses a color disk that features acontinuous-gradient color wheel for fast, accurate comparisons. The color wheel issimply rotated to obtain a color match with the treated sample. Kit measures pH in therange of 4-10. Each kit includes enough reagents to perform approximately 300 tests.

SILICA-LOW RANGEUses a color disk that features a continuous-gradient color wheel for fast, accuratecomparisons. The color wheel is simply rotated to obtain a color match with the treatedsample. Kit measures SiO2 in the range of 0-1 mg/L. Each kit includes enough reagentsto perform approximately 100 tests.

SILICA-HIGH RANGEUses a color disk that features a continuous-gradient color wheel for fast, accuratecomparisons. The color wheel is simply rotated to obtain a color match with the treatedsample. Kit measures SiO2 in the range of 0-40 mg/L. Each kit includes enoughreagents to perform approximately 100 tests.

RO WATER QUALITY TEST KITConvenient, self-contained test kit provides all the materials and instructionsrequired for on-site monitoring of reverse osmosis (RO) systems, for both feed andproduct water. Because tap water is checked, pretreatment components foroptimum RO performance can be determined. Each kit contains all materials andinstructions to perform the following tests: Silt Density Index, Total Hardness,Alkalinity, pH, Temperature, Langelier Saturation Index, Free and Total Chlorine,Soluble and Insoluble Iron, Carbon Dioxide and Silica.



KIT2444301 Alkalinity Test Kit

REAG2437401 Replacement reagent set (approx. 100 tests)

KIT143601 Carbon Dioxide Test Kit


KIT1454201 Chlorine-Low Range, as free Cl2 down to 0.2 mg/L

KIT1454202 Chlorine-Low Range, as total Cl2 down to 0.2 mg/L

KIT1454200 Chlorine-Low Range, as free and total Cl2 down to 0.02 ppm mg/L

REAG1406499 Replacement reagent set total chlorine

REAG1407099 Replacement reagent set free chlorine

REAG2440400 Replacement reagent set free & total chlorine

KIT2444400 Chlorine-Mid and High Range Test Kit


KIT145201 Hardness Test Kit


KIT146400 Iron Test Kit


KIT147011 pH Test Kit


KIT2255000 Silica-Low Range Test Kit


KIT1455400 Silica-High Range Test Kit


HAWP04700 Replacement filters for Fouling IndexTest Kit

TESTKITUP RO Water Quality Test Kit

27




ANALYTICAL TEST KITS, ANALYZERS, SAMPLING DEVICES

Bacteria Samplers

Provides simple, fast microbiological analysis of surface, natural source, make-up,

process and laboratory-grade water (or high-purity). Extremely versatile for

sampling fluids and different types of surfaces and crevices. Can be used in a

variety of industries including beverage bottling/canning, cosmetic and

pharmaceutical manufacturing, food processing. Each sampler absorbs 1 mL of

sample. Consists of a plastic tab supporting a 0.45 µm filter bonded to an

adsorbent pad containing dehydrated nutrient medium, and all contained in a

transparent plastic case.

• Filter surface is grid-marked to permit counting colonies

• Presterilized and ready for use, the sample does not require special preparation

• Entire assembly is sterilized and packaged in a sealed plastic envelope. Samples

may be used in conjunction with the swabbing unit for surface-sanitization.

This is a cotton-tipped swab stick in sterile buffer contained in a vial similar to

the sampler vial.



MC0010025. . . . . Coli-count Sampler (blue) 25/pk

MY0010025. . . . . Yeast and Mold Sampler (white) 25/pk

MT0010025. . . . . Total Count Sampler (white) 25/pk

MHPC10025 . . . . HPC Total Count Sampler for Dialysis (red) 25/pk

B01040WA . . . . . Whirl-Pak® Thio-Bag® 100mL (100/pk)

28 ANALYTICAL TEST KITS, ANALYZERS, SAMPLING DEVICES

ESP Sanitary Sampling Valves



SYSTEM SPECIFICATIONSCatalog Number ZWSSP0400 ZWSSP0800 ZWSSPW400 ZWSSPW800 ZWSSPW840 ZWSSPW441 ZWSSPW442 ZWSSPW442 9594

Type 1/4" NPTM 1/8" NPTM 1/4" weldable 1/8" weldable 1" pre-welded 1 1/ 2" pre-welded TC 2" pre-welded TC 3" pre-welded TC end cap pre-welded

Spare Parts Catalog No.Whirl-Pak® Bags (100 mL; 100/pk) B01040WAPlastic Syringes, 20 mL (12/pk). XX11 020 12Plastic Syringes, 50 mL (5/pk). . XX11 050 05Spare Parts Kit (3 Viton® o-rings,

5 syringe needles, 10 plastic caps, 3 plug seals) YY20 04K 00

Plastic Cap Only . . . . . . . . . . . . P91018Spare Parts Kit

(2 o-rings, 2 plug seals) . . P91968

The ESP sanitary sampling valve is designed for the sterile sampling of high-purity

water. It allows for mid-stream sample collection in water lines, resulting in truly

representative sampling. The unique design eliminates bacterial and particle

build-up that could interfere with bacteriological test results.

• Comes complete with two 18-gauge blunt-end syringe needles (for sanitization),

a spare set of seals, and two sealing caps (covers the Luer-slip outlet to maintain

sanitary conditions)

• Available in 1/4" (for use with 1-1/2" or larger diameter lines) and 1/8" (for use

with 3/4" or larger lines) NPT or weldable configurations

• Valves pre-welded into 1" – 3" diameter spool pieces or a 1-1/2" TC end cap is

also available

• Easily installed in liquid distribution lines; can be kept in a sanitary condition

between uses

• Bacteriological analysis monitor can be directly attached to the valves Luer-slip

outlet, or flow can be directed into any type of container

• Sampling valve body and stems constructed of 316 stainless steel

• Operational up to 100 psig (7 bar) at 25°C

29




BAG FILTERS

Bag Filters

BAG FILTERS (LOW FLOW)

• Polypropylene thermally welded bag

ORDERING INFORMATIONLOW FLOW 10”

Size Micron Catalog Number

10 1 D100444510 5 D100444710 10 D100444910 25 D100445110 50 D100445310 100 D100445510 200 D1004457

BAG FILTERS

• Available in #1 (7x16.5") and #2 (7x32") sizes

• Stainless steel locking ring

• Choice of polypropylene or polyester felt materials

ORDERING INFORMATIONPolypropylene


P2 . . . . . 5 FBSP05P2PP2. . . . . 10 FBSP010P2PP2. . . . . 25 FBSP025P2PP2. . . . . 50 FBSP050P2PP2. . . . . 100 FBSP0100P2P

P1. . . . . 5 FBSP05P1PP1. . . . . 10 FBSP010P1PP1. . . . . 25 FBSP025P1PP1. . . . . 50 FBSP050P1PP1. . . . . 100 FBSP0100P1P

Polyester Felt


P2 . . . . . 1 FBWPE1P2SP2. . . . . 5 FBWPE5P2SP2. . . . . 10 FBWPE10P2SP2. . . . . 25 FBWPE25P2SP2. . . . . 50 FBWPE50P2SP2. . . . . 100 FBWPE100P2S

P1. . . . . 1 FBWPE1P1SP1. . . . . 5 FBWPE5P1SP1. . . . . 10 FBWPE10P1SP1. . . . . 25 FBWPE25P1SP1. . . . . 50 FBWPE50P1SP1. . . . . 100 FBWPE100P1S

BAG FILTERS (SEWN-CASE QUANTITIES ONLY)

• Polypropylene or polyester

ORDERING INFORMATIONPolypropylene Felt


P2 . . . . . 1 FBWPO1P2SP2. . . . . 5 FBWPO5P2SP2. . . . . 10 FBWPO10P2SP2. . . . . 25 FBWPO25P2SP2. . . . . 50 FBWPO50P2SP2. . . . . 100 FBWPO100P2S

P1. . . . . 1 FBWPO1P1SP1. . . . . 5 FBWPO5P1SP1. . . . . 10 FBWPO10P1SP1. . . . . 25 FBWPO25P1SP1. . . . . 50 FBWPO50P1SP1. . . . . 100 FBWPO100P1S

ORDERING INFORMATIONPolyester


P2 . . . . . 5 FBSPE5P2SP2. . . . . 10 FBSPE10P2SP2. . . . . 25 FBSPE25P2SP2. . . . . 50 FBSPE50P2SP2. . . . . 100 FBSPE100P2S

P1. . . . . 5 FBSPE5P1SP1. . . . . 10 FBSPE10P1SP1. . . . . 25 FBSPE25P1SP1. . . . . 50 FBSPE50P1SP1. . . . . 100 FBSPE100P1S

ORDERING INFORMATIONLOW FLOW 20”


20 1 D100444620 5 D100444820 10 D100445020 25 D100445220 50 D100445420 100 D100445620 200 D1004458

30



STAINLESS STEEL NON-CODE BAG FILTER HOUSINGS*

• 316SS construction

• BUNA-N O-ring

• 2" NPTF threaded or 2” RF 150lb ANSI flanged

• Available in 65 gpm (size P1) or 125 gpm (size P2) flow rates

• Rated at 150 psi @ 200°F

ORDERING INFORMATIONCatalog Number:

P1 . . . . . . . . . FBHFBF111S

P2 . . . . . . . . . FBHFBF112S

P1 (Flng). . . . FBHFBF111SFP2 (Flng). . . . FBHFBF112SF

STAINLESS STEEL ASME CODE BAG FILTER HOUSINGS*

• 316SS construction

• BUNA-A O-ring

• RF 150lb ANSI flanged connections

• Single bag housings available with swing bolt closure

• Multi bag housings have swing bolt spring-assist closure, see flow rates below

• Rated at 150 PSI @ 200˚F

ORDERING INFORMATIONSize Flow Rate Connection Part Number

1 bag . . . . . . . . . . P1 65 2” FBHTBF111S

1 bag . . . . . . . . . . P2 125 2” FBHTBF112S

3 bag . . . . . . . . . . P2 230 3” FBHF3AV0300001

4 bag . . . . . . . . . . P2 400 4” FBHF3AV0400001

6 bag . . . . . . . . . . P2 675 6” FBHF3AV0600001

8 bag . . . . . . . . . . P2 900 8” FBHF3AV0800001

BAG FILTERS

Bag Filter Housings

31BAG FILTERS

Bag Filter Housings




PLASTIC BAG FILTER HOUSINGS (STANDARD FLOW)

• Heavy duty reinforced polypropylene construction• Viton® Seals• 2" NPTF connections• Available in 50 gpm (size P1) or 100 gpm (size P2) flow rates• Rated at 150 psi @ 80°F• Duplex valved A/B bank divert operation

ORDERING INFORMATIONInlet/Outlet Flow Rate Part#

10" . . . . . . . . . . . 1" 15 GPM D1004442

10" . . . . . . . . . . . 1.5" 20 GPM D1004443

20" . . . . . . . . . . . 1" 15 GPM FC150367

20" . . . . . . . . . . . 1.5" 20 GPM D1004444

PLASTIC BAG FILTER HOUSINGS

• Polypropylene construction

• Choice of 10” or 20” housings

• Comes with gauge, wrench and 3/8” drain valve

• Available in 1” and 1 1/2” NPT sizes

• Large Acme thread closure


P1 . . . . . . . . . FBHFLT4201

P2 . . . . . . . . . FBHFLT4202

P1 (duplex) . . FBHFLT1DUP

P2 (duplex) . . FBHFLT2DUP

7

K

CARTRIDGE DESIGN DESCRIPTION CODE

Gaskets compressed on knife edge seal Fof housing

O-rings are locatedexternally on the 0cartridge

O-rings are locatedexternally on the 5cartridge

Single O-ring located inside 10the cartridge

The following table is presented as reference when ordering filter cartridges. For

more detailed information, please contact our Technical Support Team at 800-875-

7873 ext. 5000.

Code F Style CartridgesDouble open end with flat gasket

Code 10 Style CartridgesSingle Open End with 1-120 Internal O-Ring at Open End

Code O Style CartridgesSingle Open End with

2-222 O-Ring with Seal

Code 5 Style CartridgesSingle Open End

2-222 O-Ring Seal andSpear End Assembly

Code 7 Style CartridgesSingle Open End with

2-226 O-Ring Locking Seal andSpear End Assembly

O-rings are located externally on the cartridge. The adapterlocks into the housingwith spear assembly

Code K SOE plastic spring assembly, saw cut end

Knife edge SOEwith spring seal

32



CARTRIDGE FILTERS

Cartridge End Caps

33




CARTRIDGE FILTER - ACTIVATED CARBON

Granular Activated Carbon Filter Cartridge

• Composed of lignite-based granular activated carbon in an upflow cartridge

design for removing chlorine feed water

• Cartridge is designed to allow water to enter the bottom of the cartridge, then

filtered through the entire carbon bed before exiting at the top to maximize

the contact time and therefore the adsorption

• Internal expansion pad maintains a tight, compact column to minimize

channeling or bypass

• Nominal 20 micron post-filter reduces carbon fines as well as other suspended

particles

SPECIFICATIONSDimensions 10" Cartridge 20" Cartridge

Diameter (OD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.875" (7.3 cm) 2.875" (7.3 cm)Length (in) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.75" (24.8 cm) 20" (50.8 cm)

Recommended Water Flow Rates

10" Cartridge Maximum . . . . . . . . . . . . . . . . . . . . . 1.0 gpm (3.8 lpm) 2.0 gpm (7.6 lpm)

Materials

Filter Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Granular, Activated CarbonPost filter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Spun PolypropyleneExpansion Pad Foam . . . . . . . . . . . . . . . . . . . . . . . Polyether/PolyurethaneOuter Casing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PolystyreneEnd Caps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PolystyreneGaskets . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Buna-N

Operating Parameters

Temperature Range . . . . . . . . . . . . . . . . . . . . . . . . 32 to 125°F (0 – 52°C)

Carbon Volume . . . . . . . . . . . . . . . . . . . . . . . . . . 12 ounces of granular carbon per 10" length

ORDERING INFORMATIONCatalog Number Description

FCGC . . . . . . . . . . . . . Filter cartridge granular carbon

F . . . . . . . . . . . . . . . . . Cartridge Code: F = flat gasket seal

XX . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20

20 . . . . . . . . . . . . . . . . Nominal micron retention rating

To determine your catalog order number, replace the X with one of the numbered or lettered options beside it.

• Composed of pre-washed, finely pulverized activated carbon, encapsulated in a

depth filtration media of highly purified alpha-cellulose and synthetic fibers for

removing chlorine

• Depth-type cartridge ensures superior dirt holding capacity in sediment-laden

waters to minimize premature exhaustion while it is being carbon treated

• Design includes a thermally bonded outer, nominal 10 micron pre-filtration

layer that provides for depth filtration in one pass without carbon channeling

or media migration

SPECIFICATIONSDimensions 10" Cartridge 20" Cartridge

Diameter (OD). . . . . . . . 2.75" (7.0 cm) 2.75" (7.0 cm)Length (in). . . . . . . . . . . 9.75" (24.8 cm) 20" (50.8 cm)


Maximum . . . . . . . . . . . 1.0 gpm (3.8 lpm) 2.0 gpm (7.6 lpm)

Materials

Primary filter media . . . . . . . . . . . . . . . . Pulverized, Activated CarbonInner Layer Media . . . . . . . . . . . . . . . . . Alpha Cellulose and Synthetic FibersInner Core . . . . . . . . . . . . . . . . . . . . . . . PolypropyleneOuter Netting . . . . . . . . . . . . . . . . . . . . . PolyolefinEnd Caps. . . . . . . . . . . . . . . . . . . . . . . . Low Durometer Polyethylene


Temperature Range . . . 32 to 125°F (0 – 52°C)

Carbon Volume

. . . . . . . . . . . . . . . . . . . 3.7 ounces of pulverized carbon per 10" length


FCPC . . . . . . . . . . . . . . Filter cartridge pulverized carbon

F . . . . . . . . . . . . . . . . . . Cartridge Code: F = double open end w/flat gasket seal

XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20

10 . . . . . . . . . . . . . . . . . Nominal micron retention rating

To determine your catalog order number, replace the X with one of the numbered or lettered options beside it.

34



CARTRIDGE FILTER - ACTIVATED CARBON

Pulverized Activated Carbon FilterCartridge

35




CARTRIDGE FILTER - PARTICULATE

DI GARD™ String Wound Prefiltration Cartridges

• Designed for a variety of prefiltration applications such as SDI (service

deionization), reverse osmosis, and CDI® (Continuous Deionization) systems

• String wound type filter with your choice of cotton, industrial or surfactant-free

polypropylene string over a polypropylene core

• Large void volume design for low-cost, reliable filtration performance with high

contaminant holding capacity

• Continuous filter winding in 20-, 30-, and 40-inch lengths prevents by-passing

or excessive pressure drops at the seams

• Gasketed end caps on 0.5 µm rated filters for positive sealing that eliminates

by-passing

• Surfactant-free FCPX style filter meets USP Class VI Biological Tests for Plastics

requirements

SPECIFICATIONSDimensions

Diameter (OD). . . . . . . . 2.5" (6.5 cm)Length (in). . . . . . . . . . . 9.75, 10, 19.5, 20, 29.25, 30, 40

Materials

FCCS . . . . . . . . . . . . . . FDA-Listed bleached white cotton fiber stringmedia with polypropylene core

FCPS . . . . . . . . . . . . . . FDA-Listed polypropylene fiber string media with polypropylene core

FCPX . . . . . . . . . . . . . . Surfactant-free polypropylene fiber string media with polypropylene core

. . . . . . . . . . . . . . . . . . . NOTE: Code F cartridges (0.5 µm) have santophrene end seals.


Maximum Temperature . . . . . . . . . . . . . 140°F (60°C)Maximum Differential Pressure @ 25°C 50 psi (3.4 bar)Micron Ratings. . . . . . . . . . . . . . . . . . . . 0.5, 1, 3, 5, 10, 20, 50 MicronsFiltration Efficiency . . . . . . . . . . . . . . . . Nominal 90%Recommended Water Flow Rates . . 5.0 gpm/10" length (18.9 lpm/10" length)


FCXX . . . . . . . . . . . . . . FCCS = FDA-Listed bleached cotton string fiberFCPS = FDA-Listed polypropylene string fiberFCPX = surfactant-free polypropylene string fiber cartridge

F . . . . . . . . . . . . . . . . . . Cartridge Code: F = double open end

XX . . . . . . . . . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 19 = 19.5, 20 = 20, 29 = 29.25, 30 = 30, 40 = 40

XX . . . . . . . . . . . . . . . . . Micron Rating: S5 = 0.5µm, 01 = 1 µm, 03 = 3 µm, 05 = 5 µm, 10 = 10 µm, 20 = 20 µm, 50 = 50 µm

To determine your catalog order number, replace the X with one of the numbered or lettered optionsbeside it. Note: Not all part number combinations are available; consult Technical Support forassistance.

• Designed for a variety of prefiltration applications such as SDI (service deionization),

reverse osmosis and CDI® (Continuous Deionization) systems

• Graded density melt spun polypropylene media design for exceptional throughput,

with high contaminant holding capacity

• Gasketed end caps on 1, 3 and 5 µm rated filters for positive sealing that eliminates

bypass contamination

• Manufactured from materials which are listed for food contact applications in Title

21 of the U.S. Code of Federal Regulations. Product in compliance with EU Directive

2002/72/EC for plastic in food contact (in simulants A, B, C, and D).

• All polypropylene components meet the specifications for biological safety as per the

USP for Class VI-121˚C plastics (gaskets/O-rings excluded).

• FCRO Series filter cartridges are free of surfactants, anti-static agents, binders, and

adhesives

• NSF Certified


Diameter (OD). . . . . . . . 2.5" (6.5 cm)Length (in). . . . . . . . . . . 9.75, 10, 12, 19.5, 20, 30, 31, 40

Materials

Media . . . . . . . . . . . . . . Melt blown polypropyleneCore . . . . . . . . . . . . . . . Integral polypropylene coreO-Rings. . . . . . . . . . . . . Silicone o-ringsGaskets. . . . . . . . . . . . . Santoprene end seals


Maximum Temperature . . . . . . . . . . . . . 140°F @ 25 psid Maximum Differential Pressure @ 25°C 50 psi (3.4 bar)Micron Ratings. . . . . . . . . . . . . . . . . . . . 1, 3, 5, 10, 20, 25, 50, 75 micronsFiltration Efficiency . . . . . . . . . . . . . . . . Nominal 90%Recommended Water Flow Rate . . . 5.0 gpm/10" length (18.9 lpm/10" length)

ORDERING INFORMATIONCatalog Number and Description

FCRO . . . . . . . . . . . . . . Rogard II all polypropylene depth cartridge

X . . . . . . . . . . . . . . . . . . Cartridge Code: F = double open end (1&5 µm w/gasket) K = knife edge seal with spring seal0 = 2-222 o-rings (12&20", 1&5 µm only)N = double open end (1, 3 & 5 µm – no gasket)

XX . . . . . . . . . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 12 = 12, 19 = 19.5, 20 = 20, 30 = 30, 31 = 31, 40 = 40

XX . . . . . . . . . . . . . . . . . Micron Rating: 01 = 1 µm, 03 = 3 µm, 05 = 5 µm, 10 = 10 µm,20 = 20 µm, 25 = 25 µm, 50 = 50 µm, 75 = 75 µm


36




ROGARD™ Graded Density PolypropyleneMedia Filter Cartridge

37





Prepure DP™ Graded DensityPolypropylene Depth Media Filter Cartridge

• Composed of graded density melt blown polypropylene depth media for high

efficiency prefiltration and post-filtration of DI resin applications

• Prepure DP™ filtration cartridges feature high contaminant loading due to graded

density depth filtration media construction

• FDA Listed Materials - Manufactured from materials which are listed for food

contact applications in Title 21 of the U.S. Code of Federal Regulations

• All components meet the specifications for biological safety as per the USP for Class

VI-121˚C plastics (gaskets/O-rings excluded).

• Virgin polypropylene construction with fusion welding minimizes extractables


Diameter (OD). . . . . . . . 2.6" (6.6 cm)Length (in). . . . . . . . . . . 9.75, 10, 20, 30, 40

Materials

Cartridge . . . . . . . . . . . . Polypropylene caps, core and cageMedia . . . . . . . . . . . . . . Non-woven melt blown polypropyleneSeals . . . . . . . . . . . . . . . Silicone o-rings and gaskets


Maximum Temperature . . . . . . . . . . . . . 180°F (82°C) @ 15 psidMaximum Differential Pressure @ 20°C 75 psid (5.2 bard)Filtration Efficiency . . . . . . . . . . . . . . . . Nominal 90%


0.5 – 5 micron. . . . . . . . 2.0 gpm/10" length (7.6 lpm/10" length)10 – 50 micron . . . . . . . 5.0 gpm/10" length (18.9 lpm/10" length)

Sanitizing Agents. . . . Chlorine or hydrogen peroxide


Catalog Number and Description

FCDP . . . . . . . . . . . . . . All polypropylene depth filter cartridge

X . . . . . . . . . . . . . . . . . . Cartridge Code: 0 = 2-222 o-rings 7 = 2-226 o-rings w/spear1 = single open end w/internal o-ringF = double open end w/flat gasket seal

XX . . . . . . . . . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40

XX . . . . . . . . . . . . . . . . . Micron Rating: S5 = 0.5 µm, 01 = 1 µm, 03 = 3 µm, 05 = 5 µm, 10 = 10 µm, 25 = 25 µm, 50 = 50 µm


Media Grade Nominal 99.9% AbsS5 .5 11 1 33 3 55 5 10

10 10 2025 25 4050 50 70

• Designed to deliver precision prefiltration through the patented advanced melt

blown structure that incorporates large diameter fibers for strength while

maintaining small fibers for filtration

• High purity, 100% polypropylene construction is free of surfactants, binders

and adhesives

• FDA Listed Materials - Manufactured from materials listed for food contact

applications in Title 21 of the U.S. Code of Federal Regulations. Product (3

micron and higher) in compliance with EU Directive 2002/72/EC for plastic in

food contact (in simulants A, B, C, and D).

• Toxicity - All polypropylene components meet the specifications for biological

safety as per the USP for Class VI-121˚C plastics (gaskets/O-rings excluded).

38




NT Series Graded Pore Polypropylene Depth Filter Cartridge

SPECIFICATIONSDimensionsDiameter (OD). . . . . . . . 2.5" (6.5 cm)Length (in). . . . . . . . . . . 9.75, 10, 20, 30, 40

MaterialsCartridge . . . . . . . . . . . . Polypropylene caps and coreMedia . . . . . . . . . . . . . . CoLD® fiber melt blown polypropyleneSeals . . . . . . . . . . . . . . . Silicone o-rings and Santoprene® gaskets

Operating ParametersMaximum Temperature

0.5-10 µm: . . . . . . . . . . . . . . . . . . . 15 psid (1.03 bard) @ 180˚F (82˚C)25 psid (1.72 bard) @ 150˚F (66˚C)60 psid (4.14 bard) @ 86˚F (30˚C)

15-120 µm: . . . . . . . . . . . . . . . . . . . 25 psid (1.72 bard) @ 140˚F (60˚C)50 psid (3.45 bard) @ ambient

Maximum Differential Pressure @ 30°C 60 psi (4.1 bar)Filtration Efficiency . . . . . . . . . . . . . . . . Nominal 90%

Recommended Water Flow Rates0.5 – 3 micron. . . . . . . . 2.0 gpm/10" length (7.6 lpm/10" length)5 – 75 micron . . . . . . . . 5.0 gpm/10" length (18.9 lpm/10" length)

Sanitizing Agents . . . Chlorine, hydrogen peroxide

Autoclaving:Single open end FCNT Series filter cartridges can be autoclaved for 30 minutes at 250˚F(121˚C) under no end load conditions. However, filter cartridges should be allowed to cool tonormal system operating temperatures prior to use.

Steam Sterilization:Not recommended.


FCNT . . . . . . . . . . . . . . Polypropylene CoLD® depth filter cartridge

X . . . . . . . . . . . . . . . . . . Cartridge Code: 0 = 2-222 o-rings7 = 2-226 o-ring locking tabs w/spear1 = single open end w/internal o-ringN = double open end (0.5 – 5 mm – no gasket)

XX . . . . . . . . . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40

XX . . . . . . . . . . . . . . . . . Micron Rating: S5 = 0.5 µm, 01 = 1 µm, 03 = 3 µm, 05 = 5 µm, 10 = 10 µm, 15 = 15 µm, 20 = 20 µm, 30 = 30 µm, 40 = 40 µm, 50 = 50 µm, 75 = 75 µm


39





Postpure PP™ Graded Density PleatedPolypropylene Depth Media Filter Cartridge

• Composed of graded-density, pleated, polypropylene depth media for high efficiency

postfiltration of DI resin applications

• FDA Listed Materials - Manufactured from materials which are FDA listed for food

contact applications in Title 21 of the U.S. Code of Federal Regulations.

• Toxicity - All polypropylene components meet the specifications for biological safety as

per the USP for Class VI-121˚C plastics (gaskets/O-rings excluded).

• Cartridges are free of resins, binders and adhesives.

SPECIFICATIONS

Dimensions

Diameter (OD). . . . . . . . 2.6" (6.6 cm)Length (in). . . . . . . . . . . 10, 20, 30

Materials

Cartridge . . . . . . . . . . . . Polypropylene caps, core and cageMedia . . . . . . . . . . . . . . Pleated, non-woven melt blown . . . . . . . . . . . . . . . . . . . polypropylene

Seals . . . . . . . . . . . . . . . Silicone o-rings and gaskets


Maximum Temperature . . . . . . . . . . . . . 150°F (65°C) @ 40 psid (2.8 bard)Maximum Differential Pressure @ 20°C 75 psid (5.1 bard)Filtration Efficiency . . . . . . . . . . . . . . . . nominal 90%


0.3 – 1 micron. . . . . . . . 2.0 gpm/10" length (7.6 lpm/10" length)3 – 30 micron . . . . . . . . 8.0 gpm/10" length (30.1 lpm/10" length)

Sanitizing Agents

Chlorine, hydrogen peroxide, in-line with hot water (82°C) for one hour, autoclaved for 20 minutes at 121°C under no load conditions.

Sterilization

Multiple autoclaving for 30 minutes at 250˚F (121˚C) under no end load conditions. In-line steam sterilization is not recommended. May be in-line sanitized with hot water at180˚F (82˚C) for 1 hour.


FCPP . . . . . . . . . . . . . . All polypropylene, pleated, nominal depth filter cartridge

X . . . . . . . . . . . . . . . . . . Cartridge Code: 0 = 2-222 o-rings 5 = 2-222 w/spear7 = 2-226 o-rings locking tabs w/spear1 = single open end w/internal o-ringF = double open end w/flat gasket seal

XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30

XX . . . . . . . . . . . . . . . . . Micron Rating: S3 = 0.3 µm, S6 = 0.6 µm, 01 =1 µm, 03 = 3 µm, 05 = 5 µm, 10 = 10 µm, 30 = 30 µm


• Absolute filtration with sharp particle cutoffs deliver precise removal

efficiencies

• Patented melt blown structure provides outstanding retention efficiency,

mechanical strength, and long on-stream life

• High purity, 100% polypropylene construction is free of surfactants, binders and

adhesives making these cartridges ideal for use in food and beverage

applications

• FDA Listed Materials - Manufactured from materials which are listed for food

contact applications in Title 21 of the U.S. Code of Federal Regulations. Product

(5 micron and higher) in compliance with EU Directive 2002/72/EC for plastic in

food contact (in simulants A, B, C, and D).

• Toxicity - All polypropylene components meet the specifications for biological

safety as per the USP for Class VI-121˚C plastics (gaskets/O-rings excluded).

SPECIFICATIONSDimensionsDiameter (OD). . . . . . . . 2.5" (6.5 cm)Length (in). . . . . . . . . . . 9.75, 10, 20, 30, 40MaterialsCartridge . . . . . . . . . . . . Polypropylene caps and coreMedia . . . . . . . . . . . . . . CoLD® fiber melt blown polypropyleneSeals . . . . . . . . . . . . . . . Silicone o-rings and gasketsOperating ParametersMaximum Temperature . . . . . . . . . . . . .

0.5-20 µm: . . . . . . . . . . . . . . . . . . . 15 psid (1.03 bard) @ 180˚F (82˚C)25 psid (1.72 bard) @ 150˚F (66˚C)60 psid (4.14 bard) @ 86˚F (30˚C)

30-120 µm: . . . . . . . . . . . . . . . . . . . 25 psid (1.72 bard) @ 140˚F (60˚C)50 psid (3.45 bard) @ ambient

Maximum Differential Pressure @ 30°C 60 psi (4.1 bar)

Filtration Efficiency Absolute (> 99.9% Retention Rating by ASTM F-795 Test)

Recommended Water Flow Rates0.5 – 5 micron. . . . . . . . 2.0 gpm/10" length (7.6 lpm/10" length)10 – 70 micron . . . . . . . 5.0 gpm/10" length (18.9 lpm/10" length)Sanitizing Agents. . . . . . . . . . . . . . . . . . . Chlorine, hydrogen peroxide

AutoclavingSingle open end Nexis® Series filter cartridges can be autoclaved for 30 minutes at 250˚F(121˚C) under no end load conditions. However, filter cartridges should be allowed to cool tonormal system operating temperatures prior to use.Steam SterilizationNot recommended


FCNA . . . . . . . . . . . . . . Absolute rated CoLD depth filter cartridge

X . . . . . . . . . . . . . . . . . . Cartridge Code: 0 = 2-222 o-rings7 = 2-226 o-rings w/spear1 = single open end w/ internal o-ringF = double open end w/flat gasket seal5 = 2-222 o-rings w/spear

XX . . . . . . . . . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40

XX . . . . . . . . . . . . . . . . . Micron Rating: S5 = 0.5 µm, 01 = 1 µm, 03 = 3 µm, 05 = 5 µm, 10 = 10 µm, 15 = 15 µm, 20 = 20 µm, 30 = 30 µm, 50 = 50 µm, 70 = 70 µm

To determine your catalog order number, replace the X with one of the numbered or lettered optionsbeside it. Note: Not all part number combinations are available; consult Technical Support for assistance.

40




NA Series Absolute Rated PolypropyleneDepth Filter Cartridge

41





WN Series Pleated Polysulfone MembraneFilter Cartridge

• Composed of pleated highly asymmetric polysulfone membrane over a non-

woven polypropylene support layer

• For high flow rates and low pressure drops, absolute rated filters are designed

for postfiltration in high purity water applications

• High-purity construction materials are factory rinsed with DI water for quick on-

stream rinse up with a minimum of throughput

• Meets criteria for USP Class VI Biological tests for plastics, ensuring that no

surfactants or coatings interfere with the application

• FDA listed materials - manufactured from materials which are FDA listed for

food contact applications in Title 21 of the U.S. code of Federal Regulations


Diameter (OD) . . . . . . . . . . . . . . . 2.6" (6.6 cm)Length (in) . . . . . . . . . . . . . . . 9.75, 10, 20, 30, 40

Materials

Cartridge . . . . . . . . . . . . . . . Polypropylene caps, core and cage

Media . . . . . . . . . . . . . . . Single layer asymmetric hydrophilic polysulfoneSeals . . . . . . . . . . . . . . . Silicone o-rings and gaskets


Maximum Temperature . . . . . . . . . . . . . . 180°F (82°C) @ 50 psid (3.4 bard)Maximum Differential Pressure @ 20°C . 80 psi (5.5 bar)Filtration Efficiency . . . . . . . . . . . . . . . Absolute (> 99.9% Retention Rating by

. . . . . . . . . . . . . . . Latex Bead Challenge)


0.05 micron . . . . . . . . . . . . . . . 1.3 gpm/10" length (4.9 lpm/10" length)0.1 micron . . . . . . . . . . . . . . . 1.7 gpm/10" length (6.4 lpm/10" length)0.2 micron . . . . . . . . . . . . . . . 3.0 gpm/10" length (11.3 lpm/10" length)0.45 micron . . . . . . . . . . . . . . . 5.5 gpm/10" length (20.8 lpm/10" length)

Sanitizing Agents

. . . . . . . . . . . . . . . 5% Chlorine, 3% hydrogen peroxide



FCWN . . . . . . . . . . . . . . Filter cartridge single layer polysulfone

X . . . . . . . . . . . . . . . . . . Cartridge Code: 0 = 2-222 o-rings5 = 2-222 o-rings w/spear1 = single open end w/ internal o-ring7 = 2-226 o-rings w/locking tabs/spear endF = double open end w/flat gasket seal

XX . . . . . . . . . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40

XX(X) . . . . . . . . . . . . . . Micron Rating: S05 = 0.05 µm, S1 = 0.1 µm, S2 = 0.2 µm, S4 = 0.45 µm

To determine your catalog order number, replace the X with one of the numbered or lettered options beside it.Note: Not all part number combinations are available; consult Technical Support for assistance.

• Composed of a double layer of integrity testable, highly asymmetric polysulfone

membrane. These absolute rated filters offers superior bacteria and particle

removal for high efficiency postfiltration for critical high purity water applications

• Long on stream life, high flow rates and low pressure drops result from the

membrane asymmetry

• High-purity construction materials are factory flushed with DI water for quick

on-stream rinse-up with a minimum of throughput

• All polypropylene hardware and thermal welding minimizes extractables

• All materials are FDA listed for contact with food and beverages

SPECIFICATIONS

DimensionsDiameter (OD) . . . . . . . . . . . . . . . . . . . . 2.6" (6.6 cm)Length (in) . . . . . . . . . . . . . . . . . . . . . . . 9.75, 10, 20, 30, 40

MaterialsCartridge . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene caps, core and cageMedia . . . . . . . . . . . . . . . . . . . . . . . . . . . Double layer asymmetric hydrophilicpolysulfoneSeals . . . . . . . . . . . . . . . . . . . . . . . . . . . . Silicone o-rings and gaskets

Operating ParametersMaximum Operating Temperature . . . . . 86°F / 30°C (158˚F / 70˚C)Maximum Forward Differential Pressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80 psid @68˚F / 5.5 bar @ 20˚C . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 psid @ 158˚F / 1.4 bar @ 70˚C

Filtration Efficiency . . . . . . . . . . . . . . . . . 99.9% Absolute

Sanitizing Agents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5% Chlorine or 3% hydrogen peroxide

Integrity TestPore Size . . . . . . . . . . . . . . . . . . . . . . . . Diffusional Flow (cc/min) @ Test Pressure

per 10” lengthDiffusional Flow Valves (100% H20) (cc/min) @ Test pressure per 10” length0.02 µm . . . . . . . . . . . . . . . . . . . . . . . . . < 30 cm3/min @ 50 psig / 3.4 bar0.1 µm . . . . . . . . . . . . . . . . . . . . . . . . . . < 24 cm3/min @ 25 psig / 1.7 bar0.2 µm . . . . . . . . . . . . . . . . . . . . . . . . . . < 20 cm3/min @ 20 psig / 1.4 bar0.45 µm . . . . . . . . . . . . . . . . . . . . . . . . . < 15 cm3/min @ 15 psig / 1.0 bar


FCWE . . . . . . Filter cartridge double layer polysulfone

X . . . . . . . . . . Cartridge Code:0 = 2-222 o-rings5 = 2-222 o-rings w/spear1 = single open end w/ internal o-rings7 = 2-226 o-rings w/locking tabs/spear endF = double open end w/flat gasket seal

XX . . . . . . . . . Length (in): 09 = 9.75, 10 = 10, 20 = 20, 30 = 30, 40 = 40

XX(X) . . . . . . Micron Rating: S02 = 0.02 µm, S1 = 0.1 µm, S2 = 0.2 µm, S4 = 0.45 µm

Note: Not all part number combinations are available; consult Technical Support for assistance.To determine your catalog order number, replace the X with one of the numbered/lettered optionsbeside it.

(Rinse in @ 5-6 gpm per 10" to ensure removal of air and microbubbles between the membrane layers,

especially with 0.02µ. Recommend flow per 10" is 2 gpm.)

42




WE Series Pleated Polysulfone MembraneFilter Cartridge

43





DI Series Pleated Hydrophilic PVDF MediaPharmaceutical/Biotech Grade FilterCartridge• Composed of a validatable, hydrophilic, PVDF membrane. Offering a high velocity DI

water flush for quick rinse-up with no downstream contamination.

• These absolute rated filters offer superior bacteria and particle removal for

critical high purity postfiltration applications

• Filters have single PVDF membrane with two layers of polypropylene support media to

ensure absolute bacteria retention with typical LRV >8

• The all PVDF membrane can be sanitized with chlorine, hydrogen peroxide or steam

• Virgin polypropylene construction with fusion welding minimizes extractables

• Cartridges are 100% integrity tested to verify absolute sub-micron particle retention


Diameter (OD) . . . . . . . . . . . . . . . . . . . . . 2.75" (7.0 cm)Length (in) . . . . . . . . . . . . . . . . . . . . . . . . 10, 20, 30, 40

Materials

Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene caps, core and cage

Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hydrophilic PVDFSeals . . . . . . . . . . . . . . . . . . . . . . . . . . . . Silicone o-rings and gaskets


Maximum Temperature . . . . . . . . . . . . . . 176°F (80°C) @ 25 psid (1.7 bar)Maximum Differential Pressure @ 25°C . 50 psi (3.4 bar)Filtration Rating . . . . . . . . . . . . . . . . . . . . 100% Absolute


0.1 micron . . . . . . . . . . . . . . . . . . . . . . . . 0.5 gpm/10" length (1.9 lpm/10" length)0.2 micron . . . . . . . . . . . . . . . . . . . . . . . . 1.0 gpm/10" length (3.8 lpm/10" length)

Sanitizing Agents

Chlorine, hydrogen peroxide

Sterilization

30 SIP cycles of 30 min @ 121˚C; 30 autoclave cycles of 60 min @ 121˚C

Integrity Test

Pore Size . . . . . . . . . . . . . . . . . . . . . . . . . Minimum Water Diffusional Flow (cc/min) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Bubble Point @ 23˚C @ Test Pressure per 10" length in water

0.1 µm . . . . . . . . . . . . . . . . . . . . . . . . . . . > 70 psig (≥ 4.8 bar) < 20 @ 56 psig (3.8 bar)0.2 µm . . . . . . . . . . . . . . . . . . . . . . . . . . . > 45 psig (≥ 3.1 bar) < 13.3 @ 40 psig (2.8 bar)


FCDI . . . . . . . . . . . . . . . Filter cartridge Water DI

X . . . . . . . . . . . . . . . . . . Cartridge Code: 0 = 2-222 o-rings5 = 2-222 o-rings w/spear7 = 2-226 o-rings w/locking tabs/spear endF = double open end w/flat gasket seal

XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30, 40 = 40

XX . . . . . . . . . . . . . . . . . Micron Rating: S1 = 0.1 µm, S2 = 0.2 µm

To determine your catalog order number, replace the X with one of the numbered or lettered options beside it. Note: Not all partnumber combinations are available; consult Technical Support for assistance.

• Cartridge is a validated, pleated hydrophilic PVDF membrane over a non-woven

polypropylene support layer

• Code 0, Code 5, and Code 7 configurations are available in 10, 20 30, and 40-in lengths that are

100% tested in manufacturing to ensure absolute bacteria retention with typical titre reduction

of >107/cm2

• Quantitative retention of 107 CFU/cm2 Brevundimonas diminuta ATCC® 19146 per ASTM

methodology

• Component materials meet the criteria of the USP <88> Reactivity Test for Class VI Plastics. These

products meet the requirements of the USP <88> Safety Test, utilizing a 0.9% sodium chloride

extraction

• Component materials meet the “non-fiber releasing” criteria as defined in 21 CFR 210.3 (b) (6)

• Will meet the USP Oxidizable Substances Test requirements after a water flush of <1 L

SPECIFICATIONSDimensionsDiameter (OD). . . . . . . . 2.75" (7.0 cm)Length (in). . . . . . . . . . . 10, 20, 30, 40

MaterialsCartridge . . . . . . . . . . . . Polypropylene caps, core and cageMedia . . . . . . . . . . . . . . PVDFSeals . . . . . . . . . . . . . . . Silicone o-rings

Operating ParametersMaximum Temperature . . . . . . . . . . . . . 176°F (80°C) @ 25 psid (1.7 bar)Maximum Differential Pressure @ 25°C 80 psi (5.5 bar)Filtration Rating . . . . . . . . . . . . . . . . . . . 100% AbsoluteToxicity . . . . . . . . . . . . . . . . . . . . . . . . . . Non-toxic by USP Class VI biological test for plasticsValidation . . . . . . . . . . . . . . . . . . . . . . . . Quantitative Retention of 107 CFU/cm2 per ASTM methodology

Recommended Water Flow Rates0.2 µm . . . . . . . . . . . . . 1.0 gpm/10" length (3.8 lpm/10" length)

Sanitizing Agents. . . . . . . . . . . . . . . . . . . Chlorine, hydrogen peroxide

Sterilization. . . . . . . . . . . . . . . . . . . 30 SIP cycles of 30 min @ 135˚C; 30 autoclave cycles

of 60 min @ 126˚C

Integrity TestPore Size Minimum Water Diffusional Flow (cc/min)

Bubble Point @ 23˚C @ Test Pressure per 10" length0.2 µm . . . . . . . . . . . . . > 50 psig (> 3.45 bar) < 13.3 @ 40 psig (3.1 bar)


FCPV . . . . . . . . . . . . . . Filter cartridge pharmaceutical/validated

X . . . . . . . . . . . . . . . . . . Cartridge Code: 0 = 2-222 o-rings 5 = 2-222 o-rings w/spear end7 = 2-226 o-rings w/locking tabs/spear end

XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30

S2 . . . . . . . . . . . . . . . . . Micron Rating: S2 = 0.2 µm

To determine your catalog order number, replace the X with one of the numbered or lettered options beside it. Note: Not all part number combinations are available; consult Technical Support for assistance.

44




PV Series Pleated Hydrophilic PVDF MediaPharmaceutical Grade Filter Cartridge

45





VH Series Pleated PES Media Pharmaceutical Grade Filter Cartridge

• Cartridge is a validated, pleated polyethersulphone membrane over a non-woven

polyester support layer

• Code 0, Code 5, Code 7 and Code 10 configurations are available in 10, 20 30,

and 40-in lengths that are 100% tested in manufacturing to ensure absolute

bacteria retention

• Materials conform to the relevant requirements of 21CFR Part 177 and current

USP Plastics Class VI-121˚C and ISO10993 equivalents

• FCVH Series Sterilizing Grade 0.2 micron filters are validated by bacterial challenge

testing to methods specified in ASTM F838-83 (107 organisms/cm2 minimum)

with typical in-house challenge levels being 1011 per 10 inch module for

Brevundimonas diminuta

• Contain no surfactants or coatings to interfere with your application, and the

thermo-plastic construction process minimizes extractables.SPECIFICATIONSDimensionsDiameter (OD). . . . . . . . 2.75" (7.0 cm)Length (in). . . . . . . . . . . 10, 20, 30, 40MaterialsCartridge . . . . . . . . . . . . Polypropylene, core and cage, nylon endcaps

with 316LSS insertSupport . . . . . . . . . . . . . PolyesterMedia . . . . . . . . . . . . . . PolyethersulphoneSeals . . . . . . . . . . . . . . . Silicone o-ringsOperating ParametersMaximum Temperature . . . . . . . . . . . . . 176°F (80°C) @ 29 psid (2.0 bard)Maximum Differential Pressure @ 25°C 72 psi (5.0 bar)Filtration Rating . . . . . . . . . . . . . . . . . . . 100% AbsoluteToxicity . . . . . . . . . . . . . . . . . . . . . . . . . . Non-toxic by USP Class VI biological test for plasticsValidation . . . . . . . . . . . . . . . . . . . . . . . . Microbially retentive and validated to ASTM F838-83

methodologyRecommended Water Flow Rates0.1 µm . . . . . . . . . . . . . 1.8 gpm/10" length (2.3 lpm/10" length)0.2 µm . . . . . . . . . . . . . 2.0 gpm/10" length (7.6 lpm/10" length)0.45 µm . . . . . . . . . . . . 3.0 gpm/10" length (11.4 lpm/10" length)Sanitizing AgentsChlorine, hydrogen peroxide, autoclaved for 20 minutes at 121°C under no load conditions.SterilizationFCVH cartridges can be repeatedly in-situ steam sterilized or autoclaved up to 130˚C (266˚F). They can besanitized with hot water at up to 90˚C (194˚F) and are compatible with a wide range of chemicals.Integrity TestPore Size . . . . . . . . . . . . . . . . Minimum Water Diffusional Flow (cc/min)

Bubble Point @ Test Pressure per 10" length0.1 µm . . . . . . . . . . . . . . . . . . ≥ 34.2 psig* ≤ 27 @ 70 psig (4.9 bar)0.2 µm . . . . . . . . . . . . . . . . . . ≥ 49 psig ≤ 16 @ 40 psig (2.7 bar)0.45 µm . . . . . . . . . . . . . . . . . ≥ 36 psig ≤ 16 @ 25 psig (1.7 bar)* 60/40 IPA water test solution

ORDERING INFORMATIONCatalog Number and DescriptionFCVH . . . . . . . . . . . . . . Filter cartridge pharmaceutical/validatedX . . . . . . . . . . . . . . . . . . Cartridge Code: 0 = 2-222 o-rings

1 = single open end w/internal o-ring5 = 2-222 o-rings w/spear end7 = 2-226 o-rings w/locking tabs/spear end

XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30, 40 = 40XX . . . . . . . . . . . . . . . . . Micron Rating: S1 = 0.1 µm, S2 = 0.2 µm, S4 = 0.45 µm

To determine your catalog order number, replace the X with one of the numbered or lettered options beside it.Note: Not all part number combinations are available; consult Technical Support for assistance.

• Composed of validatable hollow fiber polysulfone media with polypropylene

hardware

• These absolute rated filters offer excellent bacteria, particle and pyrogen removal

for critical pharmaceutical and life science applications, at economical costs

• Code 0, Code 5, and Code 7 configurations are available in 10, 20, 30 and

40-in lengths

• Meet current USP Class VI biological test for plastics, with a validation

certificate available

• Contain no surfactants or coatings to interfere with your application, and

thermo-plastic construction process minimizes extractables

• Hollow fiber construction ensures strength, while exhibiting low pressure drop

and exceptionally high flow rates

• Multi-tube applications require special housings - contact Technical Support


Diameter (OD). . . . . . . . 2.9" (7.4 cm)Length (in). . . . . . . . . . . 10, 20, 30, 40

Materials

Cartridge . . . . . . . . . . . . Polypropylene caps and cage, polyurethane end sealantMedia . . . . . . . . . . . . . . Polysulfone fibersSeals . . . . . . . . . . . . . . . Silicone o-rings


Maximum Temperature . . . . . . . . . . . . . 185°F (85°C) @ 10 psid (.7 bar)Maximum Differential Pressure . . . . . . . 30 psi (2 bar) @ 25°CFiltration Rating . . . . . . . . . . . . . . . . . . . 100% AbsoluteToxicity . . . . . . . . . . . . . . . . . . . . . . . . . . Non-toxic by USP Class VI biological test for plasticsValidation . . . . . . . . . . . . . . . . . . . . . . . . Diffusive flow test methods


0.05 micron . . . . . . . . . . 2.0 gpm/10" length (7.6 lpm/10" length)0.1 and 0.2 micron . . . . 3.0 gpm/10" length (11.4 lpm/10" length)

Sanitizing Agents

. . . . . . . . . . . . . . . . . . . Chlorine, hydrogen peroxide, autoclaved for 20 minutes

. . . . . . . . . . . . . . . . . . . at 121°C under no load conditions


FCUF . . . . . . . . . . . . . . Filter cartridge ultra filter

X . . . . . . . . . . . . . . . . . . Cartridge Code: 0 = 2-222 o-rings 5 = 2-222 o-rings w/spear end1 = single open end w/ internal o-ring7 = 2-226 o-rings w/locking tabs/spear end

XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30, 40 = 40

XX(X) . . . . . . . . . . . . . . Micron Rating: S05 = 0.05 µm, S1 = 0.1 µm, S2 = 0.2 µm

To determine your catalog order number, replace the X with one of the numbered or lettered options beside it. Note: Notall part number combinations are available; consult Technical Support for assistance.

46




UF Series Hollow Fiber Polysulfone MediaFilter Cartridge

47




CARTRIDGE FILTER - HOUSING

316 Stainless Steel, Single-Tube Filter HousingFor Code F

This single-tube cartridge filter housing is made of cast 316 stainless steel and

includes 316 stainless steel shell. Housings are available to accommodate 10, 20

or 30-in Code F filter cartridges. The inlet and outlet are 3/4" NPT, and the bowl

of each housing is fitted with a 1/4" NPT drain plug. This cartridge filter housing

is ideal for a wide variety of low flow applications requiring a high quality prefilter

housing or for applications where an industrial pre-filter is used.

• Single tube housings accommodate 10", 20" and 30" Code F filter cartridges

• Housing uses 316SS for construction of the head, bowl and port plug

• Inlet and outlet connections are made to the housing head, allowing cartridges

to be replaced without disconnecting the inlet/outlet piping

• Housing can be autoclaved or hot-water sanitized with the cartridges in place

for your convenience


Length (A) Width (B)

10-in Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13.5" (34.3 cm) 4.75 (12.1 cm)20-in Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23.5" (59.7 cm) 4.75 (12.1 cm)30-in Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33.5" (85.1 cm) 4.75 (12.1 cm)

Materials

Bowl and Head . . . . . . . . . . . . . . . . . . . 316 stainless steelPort Plugs . . . . . . . . . . . . . . . . . . . . . . . 316 stainless steelO-ring. . . . . . . . . . . . . . . . . . . . . . . . . . . Ethylene Propylene


Max Operating Pressure . . . . . . . . . . . 175 psi (12.1 bar) @ 200°F (93°C)Max Housing Flow Rate . . . . . . . . . . . . 12 gpm (45.4 lpm)Note: Housing rating only, safe operating pressure will depend on filter cartridge and gaskets used.

Connections

Inlet/Outlet . . . . . . . . . . . . . . . . . . . . . . . 3/4" NPTDrain . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/4" NPT

Mounting

Should be mounted by rigid pipe connections or with optional mounting bracket. Allow enoughclearance below bottom of housing to allow cartridge to be changed.

Flow Direction

“Inlet” and “Outlet” are cast on the housing head for user convenience.


ZHDFD1001 10" housing



ZHDXDB001 Mounting Bracket

B10015866 Shell O-ring EPDM

This single-tube cartridge filter housing is made of 316L stainless steel and

includes 316 stainless steel port plugs. Housings are available to accommodate

10, 20 or 30-in Code 0 filter cartridges. The inlet and outlet are 3/4" NPT, and the

bowl of each housing is fitted with a 1/4" NPT drain plug. This cartridge filter

housing is ideal for a wide variety of low flow applications requiring a high

quality prefilter housing or for applications where an industrial pre-filter is used.

• Inlet and outlet connections are made to the housing head, allowing cartridges

to be replaced without disconnecting the inlet/outlet piping

• Bowl incorporates a satin finish to help prevent bacterial build-up

• Housing can be autoclaved or hot-water sanitized with the cartridges in place

for your convenience

• Two vent ports are included in the head for venting, or for the installation of

pressure gauges

SYSTEM SPECIFICATIONSDimensions Length (A) Width (B)10-in Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14.8" (37.5 cm) 4.2 (10.5 cm)20-in Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.8" (62.9 cm) 4.2 (10.5 cm)30-in Housing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34.8" (88.4 cm) 4.2 (10.5 cm)

MaterialsHead . . . . . . . . . . . . . . . . . . . . . . . . . . . 316L stainless steelBowl and Plugs . . . . . . . . . . . . . . . . . . . 316 stainless steelO-ring. . . . . . . . . . . . . . . . . . . . . . . . . . . EPDM

Surface FinishHead . . . . . . . . . . . . . . . . . . . . . . . . . . . Sand Blasted Finish Cartridge Sealing Surface . . . . . . . . . . . 32 RMS FinishBowl . . . . . . . . . . . . . . . . . . . . . . . . . . . . Satin Finish

Operating ParametersMax Inlet Pressure . . . . . . . . . . . . . . . . 175 psi (12.1 bar) @ 150°F(66°C)Note: Housing rating only, safe operating pressure will depend on filter cartridge and gaskets used.

ConnectionsInlet/Outlet . . . . . . . . . . . . . . . . . . . . . . . 3/4" NPTDrain and Vent. . . . . . . . . . . . . . . . . . . . 1/4" NPT

MountingShould be mounted by rigid pipe connections or optional mounting bracket. Allow enoughclearance below bottom of housing to allow cartridge to be changed.

Flow Direction“Inlet” and “Outlet” are electroetched on the housing head for user convenience.


ZHD0D1001 10" housing



ZHDXDB001 Mounting Bracket

B10015866 Shell O-ring EPDM

48




316L Stainless Steel, Single-Tube Filter HousingFor Code O

49





316L Electropolished Stainless Steel, Multi-Tube Filter HousingFor Code 5 or Code O

This multi-tube cartridge filter housing is made of electropolished 316L stainless steel.

Housings are available to accommodate 7 cartridges in 10, 20, 30 or 40" length, Code 5

or Code 0 configurations with two 222 o-rings. The bottom of each housing is fitted with

a 3/4" NPTF drain plug. And each housing is equipped with a NPTF vent at the top of the

housing. A V-band clamp closure allows cartridges to be changed quickly and easily.

• Housing uses electropolished 316L stainless steel construction that is easy to clean and

provides maximum corrosion resistance

• Predrilled support stand allows the housing to be secured to floor or some mounting

surface

• A 1/4" NPTF air vent plug on the cover allows venting before start-up

FILTER HOUSING SPECIFICATIONSDimensions Inlet/Outlet Housing Dimensions Flange Option Max. Flow

(inches (cm) A B C D E Rate*/gpm (lpm)

7-round 10" 2" NPTM (5.1) 25 (64) 11.5 (29) 5.5 (14) 12 (30) 12.8" (32) 35 (132)7-round 20" 2" NPTM (5.1) 33.5 (85) 11.5 (29) 5.5 (14) 12 (30) 12.8" (32) 70 (264)7-round 30" 2" NPTM (5.1) 44 (112) 11.5 (29) 5.5 (14) 12 (30) 12.8" (32) 105 (398)7-round 40" 2" NPTM (5.1) 54.5 (138) 11.5 (29) 5.5 (14) 12 (30) 12.8" (32) 140 (530)

Materials

Head and Shell . . . . . . . . . . . . . . . . . . . 316L Stainless Steel electropolishedVent and Drain Plug . . . . . . . . . . . . . . . 316 Stainless Steel Seat Cups . . . . . . . . . . . . . . . . . . . . . . . 316L Stainless SteelO-Ring . . . . . . . . . . . . . . . . . . . . . . . . . . Ethylene Propylene


Maximum Operating Pressure . . . . . . . 150 psi (10.3 bar) @ 200°F (93°C)Maximum Water Flow Rate* . . . . . . . . . 140 gpm (528 Lpm)

*Housing rating only, cartridge length and type will effect maximum flow rates

ORDERING INFORMATIONCatalog Number Description Inlet/Outlet

ZHH000710 7-round 10" 2" NPTM




ZHH000710F 7-round 10" 2" flange




B10016248 Spare Housing O-RingEPDM

This multi-tube cartridge filter housing is made of 316L stainless steel, and suited

to high purity and sanitary applications. These housings include options to

accommodate Code 0 and 5 or Code 7 filter cartridges.

• High quality, crevice free construction

• External mirror polished, internally polished to 32 Ra–EP option

• Steam sterilizable

• Sanitary Tri-Clamp, vent and drain connections

• Band clamp or Rathmann style screw clamp (used on 12, 18, 24 and 30

round vessels) body closure as standard for additional security

• Inlet/outlet available with Tri-Clamp (below) or ANSI flange connections

• Available in Code 0 and 5 (below) or optional Code 7 end cap configuration

PRODUCT SPECIFICATIONSHead and Shell . . . . . . . . . . . . . . . . . . . 316L Stainless SteelSeals . . . . . . . . . . . . . . . . . . . . . . . . . . . SiliconeSurface Finish . . . . . . . . . . . . . . . . . . . . Internal: mechanical polish 32Ra

External: mechanical polish, EP optionCartridge Configuration . . . . . . . . . . . . . Code 0 and 5, Code 7 optionMaximum Operating Pressure . . . . . . . 3–8 Round:145 psig @ 104˚F

12 Round: 130.5 psig @ 104˚FMaximum Operating Temperature . . . . . 3–8 Round: 302˚F @ 108.75 psig

12 Round: 302˚F @ 101.50 psig

ORDERING INFORMATIONPart Number Cartridge A (in) B (in) C (in) D (in) E (in) Total Total

No. Length Dia. X-port Pipe Dia. Overall Required Volume NetHeight Clearance (L) Weight (kg)

ZHHP0N0320T 3 20 6.6 14.2 1–1/2" 41.3 21.3 12.6 19.4ZHHP0N0330T 3 30 6.6 14.2 1–1/2" 51.2 31.1 17.8 21.4ZHHP0N0520T 5 20 8.6 16.5 2" 41.3 21.3 20 20ZHHP0N0530T 5 30 8.6 16.5 2" 51.2 31.1 29.1 22ZHHP0N0820T 8 20 10.7 17.6 2" 41.3 21.3 35.5 30ZHHP0N0830T 8 30 10.7 17.6 2" 51.2 31.1 49.7 33ZHHP0N1220T 12 20 13.8 26.9 3" 47.2 21.3 65 14.5ZHHP0N1230T 12 30 13.8 26.9 3" 57.1 31.1 88 19

ZHHP 3/5/8 Round

ZHHP 12 Round

Vessel Size Tri-Clamp Size (in) Flange Size (in)3 round 1-1/2" 1-1/4"5 round 2" 1-1/2"8 round 2" 1-1/2"12 round 3" 3"

50




316L Stainless Steel, Multi-Tube High PurityHousingFor Code 0 and Code 5, option for Code 7

51





316 Stainless Steel, Multi-Tube Filter HousingFor Code F

This multi-tube cartridge filter housing is made of 316 stainless steel, and is

suited for general-purpose industrial and commercial filtration. These housings

can accommodate Code F (DOE) or Code 0 cartridges, and are available with 6,

12, and 21 tubes in 10, 20, 30, 40-inch lengths.

• Incorporates a flow baffle, which deflects incoming flow to prevent cartridge

erosion

• An air vent on the cover allows venting before start-up

• A swing bolt closure allows quick disassembly for cleaning and cartridge

replacement

6-ROUND DIMENSIONS 12- AND 21-ROUND DIMENSIONS

FILTER HOUSING SPECIFICATIONS

Dimensions Inlet/Outlet Housing Dimensions Flange Option Max. Flow(inches (cm) A B C D E Rate*/gpm (lpm)

6-round 10” 2 NPTM (5.1) 24 (61) 11.2 (28) 5.2 (13) 10.2 (26) 15 (38) 30 (114)6-round 20” 2 NPTM (5.1) 34 (86) 11.2 (28) 5.2 (13) 10.2 (26) 15 (38) 60 (227)6-round 30” 2 NPTM (5.1) 45 (114) 11.2 (28) 5.2 (13) 10.2 (26) 15 (38) 90 (340)6-round 40” 2 NPTM (5.1) 56 (142) 11.2 (28) 5.2 (13) 10.2 (26) 15 (38) 120 (454)12-round 30” 3 flange (7.6) 56 (142) 31 (79) 12 (30) 12 (30) 16.4 (42) 180 (680)12-round 40” 3 flange (7.6) 66 (168) 31 (79) 12 (30) 12 (30) 16.4 (42) 240 (908)21-round 30” 4 flange (10.16) 57 (145) 31 (79) 12 (30) 16 (41) 20.8 (53) 315 (1190)21-round 40” 4 flange (10.16) 67 (170) 31 (79) 12 (30) 16 (41) 20.8 (53) 420 (1560)

Materials

Head, Shell, Plugs . . . 316L Stainless SteelInternals . . . . . . . . . . . 316 Stainless SteelCover O-Ring. . . . . . . EDPM

Maximum Operating Pressure

6-Round. . . . . . . . . . . 150 psi (10.3 bar) @ 200°F (93°C)12-Round. . . . . . . . . . 150 psi (10.3 bar) @ 200°F (93°C)21-Round. . . . . . . . . . 150 psi (10.3 bar) @ 200°F (93°C)


Catalog Number Description Inlet/Outlet

ZHGOF0610 6-round 10" 2" NPT




ZHGOF0610F 6-round 10" 2" flange




ZHFFI1230 12-round 30" 3" flange




B10020279 Replacement O-ring EPDM -6-round

B10015430 Replacement O-ring EPDM -12-round


52




316 Stainless Steel, Multi-Tube Filter Housing

53





304 Stainless Steel, Multi-Tube FilterHousing with V-Clamp ClosureFor Code F

FILTER HOUSING SPECIFICATIONSCartridge Inlet/Outlet Housing Dimensions/Inches (cm) Flange Opt. Max. FlowHousing Inches (cm) A B C D E Rate*/gpm (lpm)

5-round 10" 1-1/2 NPTM (3.8) 25 (64) 11.5 (29) 5.5 (14) 12 (30) 12.75 (32) 25 (94.6)5-round 20" 1-1/2 NPTM (3.8) 32.5 (85) 11.5 (29) 5.5 (14) 12 (30) 12.75 (32) 50 (189)5-round 30" 2 NPTM (5.1) 44 (112) 11.5 (29) 5.5 (14) 12 (30) 12.75 (32) 75 (284)5-round 40" 2 NPTM (5.1) 54.5 (138) 11.5 (29) 5.5 (14) 12 (30) 12.75 (32) 100 (378)

Materials

Head, Shell, Plugs. . . . . . . . . . . . . . . . . 304 Stainless SteelInternals . . . . . . . . . . . . . . . . . . . . . . . . . 316 Stainless SteelCover O-Ring. . . . . . . . . . . . . . . . . . . . . Ethylene PropyleneHold Down Plate Nut . . . . . . . . . . . . . . . Polypropylene


Maximum Operating Pressure. . . . . . . . 150 psi (10.7 bar) @ 200°F (93°C)Maximum Housing Flow Rates* . . . . . . 100 gpm (378 lpm)



ZHFFI0510 5-round 10" 1-1/2" NPT

ZHFFI0520 5-round 20" 1-1/2" NPT

ZHFFI0530 5-round 30" 2" NPT

ZHFFI0540 5-round 40" 2" NPT

ZHFFI0510F 5-round 10" 1-1/2" Flange

ZHFFI0520F 5-round 20" 1-1/2" Flange

ZHFFI0530F 5-round 30" 2" Flange

ZHFFI0540F 5-round 40" 2" Flange

B10016248 Spare Housing O-RingEPDM

**Flange inlet and outlet are also available; add F Suffix to part number

This multi-tube cartridge filter housing is made of durable 304 stainless steel, and is

suited for general-purpose industrial and commercial filtration. These housings can

accommodate Code F (DOE, internals provided), and can be configured for Code 0

and Code 5 cartridges.

• Incorporates a flow baffle, which deflects incoming flow to prevent cartridge erosion

• A 1/4" NPT air vent on the cover allows venting before start-up

• A 3/4" NPT drain plug allows for liquid removal

• Cartridges are independently sealed inside the housing and a single V-band clamp

housing closure allows easy cartridge replacement

• Cartridge post can be lifted out, allowing easy removal of cartridges at the bottom

of the stack

FILTER HOUSING SPECIFICATIONSCartridge Housing Dimensions/Inches (cm) Flange Opt. Max. FlowHousing A B C D E Rate*/gpm (lpm)

6-round 10" 24 (61) 11.2 (28) 5.2 (13) 10.2 (26) 15 (38) 30 (114)6-round 20" 34 (86) 11.2 (28) 5.2 (13) 10.2 (26) 15 (38) 60 (227)6-round 30" 45 (114) 11.2 (28) 5.2 (13) 10.2 (26) 15 (38) 90 (340)6-round 40" 56 (142) 11.2 (28) 5.2 (13) 10.2 (26) 15 (38) 120 (454)

Materials

Head and Shell . . . . . . . . . . . . . . . . . . . 304 Stainless SteelVent and Drain Plug . . . . . . . . . . . . . . . 304 Stainless Steel Seat Cups . . . . . . . . . . . . . . . . . . . . . . . 316L Stainless SteelO-Ring . . . . . . . . . . . . . . . . . . . . . . . . . . Ethylene Propylene


Maximum Operating Pressure . . . . . . . 150 psi (10.3 bar) @ 200°F (93°C)Max Water Flow Rate*. . . . . . . . . . . . . . 120 gpm (454 Lpm)



ZHGAF0610 6-round 10" 2" NPT




ZHGAF0610F 6-round 10" 2" flange




B10020279 Spare Housing O-ring

This multi-tube cartridge filter housing is made of 18 gauge 304 stainless steel.

Housings are available to accommodate 6, 10, 20, 30 or 40-in, Code F filter

cartridges. The inlet and outlet are 2" NPT. There is a 1/2" NPT drain plug, and a

1/4" NPT vent at the top of the housing. A swing bolt closure allows quick

disassembly for cleaning and service. This cartridge filter housing is ideal for a

wide variety of high flow applications that require an economical, high quality

housing.

• Uses 304 stainless steel construction for maximum corrosion resistance to deliver

years of dependable service

• A swing bolt closure allows quick disassembly for cleaning and service

• An air vent plug on the cover allows venting before start-up

• This housing accommodates liquid flow rates up to 180 gpm (681 lpm) with

operating pressures to 150 psig (10.3 bar)

54




304 Stainless Steel, Multi-TubeFilter Housing with Swing Bolt ClosureFor Code F

55





Polypropylene Plastic Filter Housings

These filter housings are molded from polypropylene, and are available in 10 and 20

inch lengths. Housings are supplied with 3/4" inlet and outlets in standard flat gasket

design for Code F filter cartridges. Heads are available with double cap plug design

and Viton® o-rings.

• Durable housings are made from all polypropylene materials

• Housings contain no fillers, colorants, plasticizers, or lubricants

• Housings are autoclavable, ETO sterilizable, and hydrogen peroxide compatible

• Supplied with 3/4" NPT inlet and outlets in standard flat gasket design for Code F

filter cartridges


Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5" ID, 5 1/8” OD maximumMaterials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . polypropylene cap and housing with standard

Viton® E-60 o-ringsMaximum Operating Pressure . . . . . . . . . . . . . . . . . . . . 125 psi (8.6 bar)Maximum Operating Temperature . . . . . . . . . . . . . . . . . 100°F (38°C)Sterilization/Sanitization

Hydrogen Peroxide . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5% compatibility; static soak up to 24 hr at ambient temperature

Weight10" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 lb (1.4 kg)20" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.25 lb (1.9 kg)

Housing Compatibility/Cartridge TypeZHCFA1001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Code F, 9 3/4”ZHCFA2001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Code F, 20”


Catalog Number: ZHC F A XX XX

PolypropyleneSystem Name. . . . . . . . . . . . . filter housingCartridge Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F = Code FCartridge Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A = No plugs 10 = 10Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 = 20Number of Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01 = 1 tube

To figure your order number, replace the X with one of the numbered options below it.

ACCESSORIES

Description Catalog Number

Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZHA150060Wrench . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FC150295O-ring replacement . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZHA151021


Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5" ID, 5 1/8” OD maximumMaterials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . White colored polypropylene cap and housing with

standard Viton® E-60 o-ringsMaximum Operating Pressure . . . . . . . . . . . . . . . . . . . . 100 psi (6.9 bar)Maximum Operating Temperature . . . . . . . . . . . . . . . . . 100˚ F (35˚C)Sterilization/Sanitization

Hydrogen Peroxide . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5% compatibility; static soak up to 24 hr at ambient temperature

Weight12" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 lb (1.6 kg)20" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.25 lb (1.9 kg)

Housing Compatibility/Cartridge TypeZHW0D1201. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Code 0, 10"ZHW0D2001. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Code 0, 20"


Catalog Number: ZHW X X XX XX

Whitepolypropylene

System Name. . . . . . . . . . . . . filter housingCartridge Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 = Code 0Housing Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D = Double cap plug 12 = 12Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 = 20Number of Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01 = 1 tube

To figure your order number, replace the X with one of the numbered/lettered options below it.

ACCESSORIES


Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZHA150060O-ring Viton® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZHA151117

These filter housings are molded from a white colored, high-density polypropylene,

and are available in 12 and 20 inch lengths to accommodate 10 and 20 inch Code 0

filter cartridges. Housings are molded in dies that are minutely polished for an

ultra-smooth finish to all contact surfaces, thus minimizing the opportunity for

bacteria adhesion. Housings are supplied with 3/4" inlet and outlets. Heads are

available with double cap plug design and Viton® o-rings.

• Durable housings are made from all polypropylene materials with FDA approved

white colorant

• O-rings are molded of FDA approved Viton®

• Available in 222 o-ring design for Code 0 filter cartridges

• Housings are hydrogen peroxide compatible

• Supplied with 3/4" NPT inlet and outlets

56




White Polypropylene Plastic Filter Housingfor Dialysis Filtration Applications

57





Natural Polypropylene Plastic FilterHousing

These filter housings are molded from natural, high-density polypropylene, and is

available in 10, 12 and 20 inch lengths. Housings are molded in dies that are minutely

polished for an ultra-smooth finish to all contact surfaces, thus minimizing the

opportunity for bacteria adhesion. Housings are supplied with 3/4" inlet and outlets in

standard flat gasket design for Code F filter cartridges, and 222 o-ring design for Code 0

filter cartridges. Heads are available with double cap plug design and Viton® o-rings.

• Durable housings are made from all polypropylene materials (except for o-rings)

• Housings contain no fillers, colorants, plasticizers, or lubricants

• Available in flat gasket design for Code F filter cartridges, and 222 o-ring design for

Code 0 filter cartridges

• Housings are autoclavable and hydrogen peroxide compatible

• Supplied with 3/4" NPT inlet and outlets


Dimensions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5" ID, 5 1/8” OD maximumMaterials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Natural polypropylene cap and housing with

standard Viton® E-60 o-ringsMaximum Operating Pressure . . . . . . . . . . . . . . . . . . . . 100 psiMaximum Operating Temperature . . . . . . . . . . . . . . . . . 38° C (100°F)Sterilization/Sanitization

Autoclavable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 min 121-127°C (252-260°F)Hydrogen Peroxide . . . . . . . . . . . . . . . . . . . . . . . . . . 7.5% compatibility; static soak up to 24 hr at

ambient temperature Weight

10" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 lb (1.4 kg)12" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.5 lb (1.6 kg)20" housing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4.25 lb (1.9 kg)

Housing Compatibility/Cartridge TypeZHA0D1201* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Code 0, 10"ZHA0D2001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Code 0, 20"ZHAFD1001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Code F, 9 3/4"ZHAFD2001 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Code F, 20"

*Code 0, 10" cartridge must be used with 12" housing*Code 0 cartridge requires 12" housing


Catalog Number: ZHA X X XX XX

Naturalpolypropylene

System Name. . . . . . . . . . . . . filter housing F = Code FCartridge Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0 = Code 0 10 = 10Housing Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D = Double cap plug 12 = 12Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 = 20Number of Tubes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 01 = 1 tube

To figure your order number, replace the X with one of the numbered/lettered options below it.

*Code 0 cartridge requires 12" housing

ACCESSORIES


Mounting Bracket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZHA150060O-ring Viton® . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZHA151117

CARTRIDGE SPECIFICATIONS

Dimensions

Diameter (OD) . . . . . . . . . . . . . . . . . . 2.75" (7.0 cm ) or 4.5" (11.7 cm )Length . . . . . . . . . . . . . . . . . . . 9.75", 10", 20", 30", 40”

Materials

Media . . . . . . . . . . . . . . . . . . . . . Modified CelluloseCore . . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene Gaskets . . . . . . . . . . . . . . . . . . . . . Buna N


Max. Temperature . . . . . . . . . . . . 120° F (50° C)Max. Differential Pressure . . . . . . . . 36 psi (2.5 bar) @ 25°C


2.75" Diameter . . . . . . . . . . . . . . . . . 5.0 gpm/10" Length (18.9 lpm/10" Length)4.60" Diameter . . . . . . . . . . . . . . . . 5.0 gpm/10" Length (18.9 lpm/10" Length)


Catalog Number: HAC X X XX X X

Hydrocarbon Adsorption Cartridge . HAC 09 = 9.75A = 2.75" 0 = 2-222 O-Rings 10 = 10

Cartridge Diameter . . . . . . . . . . . . . . . . . . . . B = 4.5" F = Double open end 20 = 20Cartridge Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . w/flat gasket seals 30 = 30Length (inches) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 = 40Core Material. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P = PolypropyleneGasket Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B = Buna N

• Composed of sheets of modified cellulose material rolled on a central

polypropylene support core

• Removes 95% of total hydrocarbons from water in a single pass. The media

can adsorb up to 300% of its own weight in oils

• Available in 2.75" and 4.6" diameters and lengths to 40"

58



CARTRIDGE FILTER - SPECIALTY CARTRIDGE

CLERIFY™ Oil Adsorption Filter Cartridge

CARTRIDGE FILTER - VENT FILTER

Hydrophobic PTFE Media Vent Capsule Filter

• Composed of a pleated hydrophobic PTFE filter membrane rated at 0.01 µm

absolute for small volume storage tank venting applications

• Convenient threaded inlet, with 1/2" NPTM inlet fitting screws into 1/2" NPTF

bulkhead fitting, eliminates the need for a filter housing

• Hydrophobic expanded PTFE membranes are fully validated by bacterial

challenge test methods

• Filters feature thermally-bonded polypropylene cage without using adhesives to

ensure low extractables

• 100% integrity tested in manufacturing and can be repeatedly autoclaved with

steam up to 140°C


Dimensions

Diameter (OD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2.48" (5.6 cm)Length (in) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5.9 (15 cm)Inner Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1/2" NPTM

Materials

Cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Polypropylene Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PTFE Membrane


Maximum Temperature . . . . . . . . . . . . . . . . . . . . . . . . 60˚C (140˚F)Maximum Differential Pressure @ 80°C (176˚F) . . . . 65 psig (4.5 bar)Air Filtration Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.01 µm 100% Absolute



FCVPTO6S1 Capsule Hydrophobic PTFE Filter

NOTE: These filter cartridges should not be used as a combination air vent/water overflow device.

59




• Composed of a pleated hydrophobic highly asymmetric polysulfone membrane

rated at 0.02 µm absolute for sterile air filtration, storage tank venting applications

• Filter components meet current USP Class VI biological test for plastics

• Contain no surfactants or coatings to interfere with your application, and the

thermo-plastic construction process minimizes extractables

• Asymmetric single layer membrane ensures strength, while exhibiting low pressure

drop and exceptionally high flow rates

• Sterilized by autoclaving

CARTRIDGE SPECIFICATIONSDimensions

Diameter (OD). . . . . . . . 2.6" (6.6 cm)Length (in). . . . . . . . . . . 10, 20, 30

Materials

Cartridge . . . . . . . . . . . . Polypropylene caps, core and cageMedia . . . . . . . . . . . . . . Hydrophobic asymmetric polysulfoneSeals . . . . . . . . . . . . . . . Silicone o-rings and gaskets


Maximum Temperature . . . . . . . . . . . . . Ambient AirMaximum Differential Pressure @ 23°C 60 psi (4.1 bar)Air Filtration Rating . . . . . . . . . . . . . . . . 0.02 µm 100% AbsoluteToxicity . . . . . . . . . . . . . . . . . . . . . . . . . . Non-toxic by USP Class VI biological test for plasticsSanitizing Agents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chlorine, hydrogen peroxide or autoclaving


FCEA . . . . . . . . . . . . . . Filter cartridge vent polysulfone

X . . . . . . . . . . . . . . . . . . Cartridge Code: 0 = 2-222 o-rings 5 = 2-222 o-rings w/spear end1 = single open end w/internal o-ring7 = 2-226 o-rings w/locking tabs/spear endF = double open end w/flat gasket seal

XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30

S2 . . . . . . . . . . . . . . . . . Micron Rating: S2 = 0.02 µm (air)

To figure your order number, replace the X with one of the numbered or lettered options beside it. Note: Not allpart number combinations are available; consult Technical Support for assistance.


60




EA Series Hydrophobic Polypropylene Media Vent Filter Cartridge

61





VA Series Hydrophobic PTFE ValidatedMembrane Vent Filter Cartridge


Diameter (OD). . . . . . . . 2.6Length (in). . . . . . . . . . . 5, 10, 20, 30

Materials

Cartridge . . . . . . . . . . . . Polypropylene caps, core and cageMembrane. . . . . . . . . . . Hydrophobic PTFESeals . . . . . . . . . . . . . . . Silicone o-rings


Maximum Temperature . . . . . . . . . . . . . 50˚ CMaximum Differential Pressure @ 20°C 50 psigAir Filtration Rating . . . . . . . . . . . . . . . . 0.02 µm AbsoluteToxicity . . . . . . . . . . . . . . . . . . . . . . . . . . All components conform to the Biological Safety Standards

identified in USP <88> Biological Reactivity to Class VI-121˚C levelsValidation . . . . . . . . . . . . . . . . . . . . . . . . ASTM F838-83 Liquid Bacterial Challenge

Fully retentive to both Aerosol Bacteria and Phage Challenge

Sanitizing Agents

Sterilization . . . . . . . . . . . . . . . . . . . . . . Can be insitu steam sterilized up to 180 times at 142˚C. . . . . . . . . . . . . . . . . . . Chlorine, hydrogen peroxide

Integrity Test @ 20˚C

Micron Rating . . . . . . . . 0.2 µm liquid ratingMinimum Bubble Point (psi) 14.5Pressure Decay Test Pressure (psi) 11.6Maximum Diffusional Flow (ml/min) 8.5, 18, 36, 54


FCVA. . . . . . . . . . . . . . . Filter Cartridge Vent PTFE


XX . . . . . . . . . . . . . . . . . Length (in): 05 = 5, 10 = 10, 20 = 20, 30 = 30


To figure your order number, replace the X with one of the numbered or lettered options beside it.


NOTE: Not all part number combinations are available; consult Technical Support for assistance.

• Hydrophobic, pleated PTFE membrane rated at 0.2µm absolute for sterile air filtration

• Materials of construction conform to USP Class VI biological tests for plastics

• High surface area and high voids volume combine to offer exceptional flow rates and

extended service life

• Fully validated by aerosol and liquid bacterial challenge

• Filters are integrity testable by all methods including Water Intrusion Test

• FCVA Series is fully retentive to aerosolized Brevundimonas diminuta (ATCC 19146)

bacteria when challenged with a total of 2x109 cfu over a 1-hr test at the rated flow

of the cartridge.

• Conformance to the requirements for the non-fibre releasing filters as laid down in

the U.S. Food and Drug Administration Regulations 12CFR211.72 and 210.3(b), (6).

62




VP Series Hydrophobic PTFE ValidatedMedia Vent Filter Cartridge

• Composed of a pleated, hydrophobic, PTFE, Teflon® membrane rated at 0.2 µm

absolute for sterile air filtration, storage tank venting applications

• Filter components meet the criteria of the USP Class VI biological test for plastics

• These filters feature minimal pressure loss, long service life due to high void

volume, and can be repeatedly steam sterilized or autoclaved

• Bacterial Growthrough - Prevention of bacterial grownthrough by Brevundimonas

diminuta for at least 21 days @ a challenge level ≥ 1 x 107 CFU/cm2


Diameter (OD) . . . . . . . . . . . . . . . . 2.6" (6.6 cm)Length (in) . . . . . . . . . . . . . . . . 10, 20, 30

Materials

Cartridge . . . . . . . . . . . . . . . . Polypropylene caps, core and cageMedia . . . . . . . . . . . . . . . . Hydrophobic Teflon® PTFESeals . . . . . . . . . . . . . . . . Silicone o-rings and gaskets


Maximum Temperature . . . . . . . . . . . . . . . . Ambient AirMaximum Differential Pressure @ 21°C . . 72 psi (5.0 bar)Air Filtration Rating . . . . . . . . . . . . . . . . 0.2 µm AbsoluteToxicity . . . . . . . . . . . . . . . . Non-toxic by USP Class VI biological test for plasticsVirus Aerosol Retention . . . . . . . . . . . . . . . Retention of a worst case challenge of the model

bacteriophage Φ X–174 was complete at challenge levels at 108 to 1010 virus particles at 1400 sL/min (50scfm) after 50 steam sterilization cycles of 30 minutes at 145˚C.

Sanitizing Agents . . . . . . . . . . . . . . . . Chlorine, hydrogen peroxide, autoclaved for 20 minutes . . . . . . . . . . . . . . . . at 121°C under no load conditions.

Integrity Test

Bubble point @ 23˚C . . . . . . . . . . . . . . . . ≥ 13 psig (≥ 900 mbar) nitrogen with 60/40% IPA/WaterNitrogen Diffusion @ 23˚C . . . . . . . . . . . . . ≥ 45 mL/min @ 690 mbar (10 psig) in 60/40% IPA/Water


FCVP . . . . . . . . . . . . . . Filter cartridge vent polysulfone


XX . . . . . . . . . . . . . . . . . Length (in): 10 = 10, 20 = 20, 30 = 30


To figure your order number, replace the X with one of the numbered or lettered options beside it. Note: Not all partnumber combinations are available; consult Technical Support for assistance.


Siemens offers pretreatment chemical addition products to maintain the

performance of Reverse Osmosis (RO) systems, inhibiting fouling and scaling of RO

membranes. Siemens Technical Specialists can assist you in choosing the proper

product and applying these products correctly. Pretreatment chemical addition can

be a cost-effective alternative to other methods of controlling feedwater

chemistry.

Antiscalants/Antifoulants prevent scaling of RO membranes, as well as reduce the

rate of colloidal fouling, including hardness and silica.

Coagulants injected before multimedia filters and directly into clarifiers to improve

filtration of silt, turbidity, particulate matter and colloids.

Dechlorination chemicals include sodium sulfite, sodium bisulfite, or sodium

metabisulfite to remove chlorine prior to reverse osmosis systems.

Chlorination kills and controls bacteria in pretreatment systems.

Cleaner chemicals with either low or high pH properties remove ionic and organic

foulants in the RO membrane.

Disinfectant chemicals, such as peroxyacetic acid and hydrogen peroxide

formulations, are used to sanitize the reverse osmosis systems.


Contact Technical Support at (800) 875-7873 ext. 5000 for assistance in sizing your system, choosing the proper chemical and determining the quantity of chemical required.


Pump head . . . . . . . . . PVCFittings . . . . . . . . . . . . . PolypropyleneValve Balls . . . . . . . . . . CeramicLiquifram . . . . . . . . . . . Teflon® faceSeal Rings . . . . . . . . . . Teflon®Connections. . . . . . . . . Liquid end no. 72S–0.5" tube

Liquid end no. 92S–0.375" tubeOutput . . . . . . . . . . . . . 100 psiTank . . . . . . . . . . . . . . . PolyethyleneTank Size (gallons) . . . 35 for 1 gph, 50 for 2.5 and 4 gphLiquid Level Switch . . . Polypropylene housing; PVC float tube;

polypropylene floatFlow Meter Pulsar . . . . Body–bronze; Rotor–polypropyleneElectrical . . . . . . . . . . . 115 V/60 Hz

Standard Chemical Feed System: Pre-kittedChemical feed systems are pre-kitted units with ratings of 1, 2, 4 or 5 gph, andconsist of a metering pump, a storage tank with a liquid level switch and suctiontube shield.

• Available with or without a flow pulsar.

• A flowmeter pulsar is optionally available.



ZWCF40000 4 gph chemical feed system w/outflow meter

ZWCF400FM 4 gph chemical feed system w/flow meter

ZWCF25000 2.5 gph chemical feed system w/outflow meter

ZWCF250FM 2.5 gph chemical feed system w/flow meter

ZWCF10000 1.0 gph chemical feed system w/outflow meter

ZWCF100FM 1.0 gph chemical feed system w/flow meter

63CHEMICAL FEED SYSTEMS AND ACCESSORIES

Antiscalant, Coagulants, Dechlorination,Chlorination, Cleaner and Disinfectants




64



CHEMICAL FEED SYSTEMS AND ACCESSORIES - CHEMICAL FEED SYSTEMS

Standard ChemFeed Systems: Grundfos® Pumps

Siemens offers standard dual-pump feed systems covering common chemicalapplications. The table below lists chemicals and pump configurations availablefor Grundfos® Electronic Metering Pumps. All chemical feed skids are completelyassembled and engineered for easy installation and operation.

Ordering Information

Catalog # Model # Description Capacity Material ofConstruction

SP10701904 GR-16-100-C-V Two pump skid with common inlet/discharge. 15.84 GPD CPVC / Viton®100ml Calibration Cylinder

SP10701987 GR-48-100-C-V Two pump skid with common inlet/discharge. 47.52 GPD CPVC/ Viton®100ml Calibration Cylinder

SP10701999 GR-48-100-C-E Two pump skid with common inlet/discharge. 47.52 GPD CPVC/EPDM250ml Calibration Cylinder

SP10701997 GR-118-250-C-V Two pump skid with common inlet/discharge. 117.6 GPD CPVC/ Viton®250ml Calibration Cylinder

SP10701907 GR-118-250-C-V-D Two pump skid with common inlet/discharge. 117.6 GPD CPVC/ Viton®250ml Calibration Cylinder * w/ Diaphragm Valves and Auto-Vent for Hypo

65





Standard ChemFeed Systems: LMI® Pumps


System Specifications Chemical Catalog # Output / PSI Spare LMI SparePump PartsCatalog # Catalog #

Pump Head Sodium Bisulfite: PVDF /TFE Sodium SB-10-100 10 GPD / 140 PSI AA971-353SI SP-SB-10Polymer: PP/TFE Bisulfite SB-24-100 24 GPD / 110 PSI AA951-393SI SP-SB-24Bleach:PVDF/TFE SB-60-250 60 GPD / 100 PSI B921-393SI SP-SB-60Alum: PVDF/TFE SB-96-500 96 GPD / 100 PSI C921-363SI SP-SB-96Potassium Permanganate: PVDF/TFECaustic: PVDF/TFE Polymer POLY-10-100 10 GPD / 140 PSI AA971-155HV SP-POLY-10Hydrochloric Acid: PVDF/TFE POLY-24-100 24 GPD / 110 PSI AA951-85HV SP-POLY-24Sulfuric Acid: PVDF/TFE POLY-60-250 60 GPD / 100 PSI B921-85HV SP-POLY-60Anti-Scalant: PVDF/TFE POLY-96-500 96 GPD / 100 PSI C921-75HV SP-POLY-96

Connections 1/2" CPVC Bleach SH-10-100 10 GPD / 140 PSI AA971-353HI SP-SH-10SH-10-100 24 GPD / 110 PSI AA951-393HI SP-SH-24

Output 10,GPD / 140PSI SH-60-250 60 GPD / 100 PSI B921-393HI SP-SH-6024GPD / 110PSI SH-96-500 96 GPD / 100 PSI C921-363HI SP-SH-9660GPD / 100PSI96GPD / 100PSI Alum AL-10-100 10 GPD / 140 PSI AA971-353SI SP-AL-10

AL-24-100 24 GPD / 110 PSI AA951-393SI SP-AL-24Control Manual or 4-20 mA AL-60-250 60 GPD / 100 PSI B921-393SI SP-AL-60

AL-96-500 96 GPD / 100 PSI C921-363SI SP-AL-96Electrical 120VAC / 60Hz / 1Ph

Potassium PP-10-100 10 GPD / 140 PSI AA971-353SI SP-PP-10Skid 24" x 36" PE Base Permanganate PP-24-100 24 GPD / 110 PSI AA951-393SI SP-PP-24

PP-60-250 60 GPD / 100 PSI B921-393SI SP-PP-60PP-96-500 96 GPD / 100 PSI C921-363SI SP-PP-96

Caustic CAU-10-100 10 GPD / 140 PSI AA971-353SI SP-CAU-10CAU-24-100 24 GPD / 110 PSI AA951-393SI SP-CAU-24CAU-60-250 60 GPD / 100 PSI B921-393SI SP-CAU-60CAU-96-500 96 GPD / 100 PSI C921-363SI SP-CAU-96

Hydrochloric Acid HCA-10-100 10 GPD / 140 PSI AA971-353SI SP-HCA-10HCA-24-100 24 GPD / 110 PSI AA951-393SI SP-HCA-24HCA-60-250 60 GPD / 100 PSI B921-393SI SP-HCA-60HCA-96-500 96 GPD / 100 PSI C921-363SI SP-HCA-96

Sulfuric Acid SA-10-100 10 GPD / 140 PSI AA971-353SI SP-SA-10SA-24-100 24 GPD / 110 PSI AA951-393SI SP-SA-24SA-60-250 60 GPD / 100 PSI B921-393SI SP-SA-60SA-96-500 96 GPD / 100 PSI C921-363SI SP-SA-96

Anti-Scalant AS-10-100 10 GPD / 140 PSI AA971-353SI SP-AS-10AS-24-100 24 GPD / 110 PSI AA951-393SI SP-AS-24AS-60-250 60 GPD / 100 PSI B921-393SI SP-AS-60AS-96-500 96 GPD / 100 PSI C921-363SI SP-AS-96

Siemens offers standard dual-pump feed systems covering common chemicalapplications. The table below lists chemicals and pump configurations availableusing LMI® Electronic Metering Pumps. All chemical feed skids are completelyassembled and engineered for easy installation and operation.

Spare Parts Kits include (1) Calibration Cylinder, (1) Ball Valve, (1) Pump Spare Parts Kit (Seals, Springs, Ball Checks & Diaphragm).

LMI = Liquid Metronics, Inc.

66




Polymer Feed Systems

PolyBlend® PB polymer feed systems provide optimum polymer activation andperformance. The PB Series PolyBlend® systems are economical and easy toinstall and operate. The patent technology and offer proven performance makethe PolyBlend® the benchmark in the industry.

EZ ChemFeed Systems

Siemens offers a variety of chemical feed and control systems to meet therequirements of harsh industrial applications. From simple EZ Series pump skids andaccessories to complex systems, Siemens has the ChemFeed solution for your watertreatment needs.


PolyBlend® PB Series Polymer Feed SystemsCatalog # Water Flow Diaphragm Pump

Rate GPH Output GPHPB16-0.4 16 0.4PB100-1.0 100 1.0PB200-2.0 200 2.0


Standard EZ Chemical Feed Systems & AccessoriesCatalog # Model # DescriptionCFSEZ1 EZ-1 Pump System The EZ1 Pumps System is a skid-mounted chemical metering system designed for maximum reliability and

convenience. The EZ1 package utilizes LMI® pumps providing a broad range of capabilities EZ1 Systems are typically used in water treatment programs to dose proper amounts of inhibitors, dispersants, biocides, as well as pH control chemicals and oxidants. The system comes complete and ready for service upon delivery

CFSEZ2 EZ-2 Pump System The EZ2 Dual Pump Skid System is a skid-mounted chemical metering system designed to feed either one or two chemicals together or separately. The EZ2 package utilizes LMI® pumps providing a broad range of capacities and flexibility to handle a wide range of applications. EZ2 Systems are typically used in water treatment programs to dose proper amounts of inhibitors, dispersants, biocides, as well as pH control chemical and oxidants.

CFSEZENCLOSURE EZ -Enclosure The EZ Enclosure is a high-quality NEMA 12 fiberglass enclosure, which is ideal for a number of chemical treatment applications. These units are used for dual biocide applications where containment is important.

CFSDRUMSHELF EZ- Drum Shelf The EZ Drum Shelf is designed to secure a metering pump atop a metal or plastic 55-gallon drum. The unit, constructed of 1/2 inch PVC, prevents pumps from tipping over.

At the center of the PolyBlend® PB Seriespolymer feed system is the patented multi-zone mixing chamber. The advanced designprovides uniform dispersion energy at themoment of initial wetting. The high-energymix prevents agglomerations and eliminatesthe need for extended mixing and aging byapplying the right energy at the right time.The low energy zone continues to activatethe hydrated polymer without destroyingthe fragile polymer chains. The result ismaximum polymer activation and improvedpolymer performance.

67




CHEMICAL FEED SYSTEMS AND ACCESSORIES - METERING PUMPS

Chem-Tech® Chemical Metering Pumps

The Chem-Tech® pump combines proven degassing technology with thedurability and dependability that has earned Chem-Tech® pumps the respect ofwater treatment professionals around the world. The result is a series of positivedisplacement diaphragm metering pumps that are totally self-priming andmaintain their prime even in the most demanding water conditioning and watertreatment applications.


Chem-Tech Prime Performance™ PumpsCatalog # GPH PSI Head & Fittings KOP Kit Catalog #X015-XA-BAA8XXX 15 100 PVC / Hypalon KX100-BAA8X015-XA-BBA8XXX 15 100 PVC / Viton KX100-BBA8X024-XA-BAA8XXX 24 100 PVC / Hypalon KX100-BAA8X024-XA-BBA8XXX 24 100 PVC / Viton KX100-BBA8X030-XA-BAA8XXX 30 100 PVC / Hypalon KX100-BAA8X030-XA-BBA8XXX 30 100 PVC / Viton KX100-BBA8

Catalog # GPH PSI TubingSeries CTP-A Simplex (Peristaltic Pumps)

CTPA2HSA-PAP1-XXXXX 3.5 125 NorpreneCTPA2LSA-PAP1-XXXXX 3.5 80 NorpreneCTPA3HSA-PAP1-XXXXX 8 110 NorpreneCTPA3LSA-PAP1-XXXXX 8 70 NorpreneCTPA4HSA-PAP1-XXXXX 13 100 NorpreneCTPA4LSA-PAP1-XXXXX 13 50 NorpreneCTPA6LSA-PAP1-XXXXX 30 40 NorpreneCTPA6HSA-PAP1-XXXXX 30 80 Norprene

Series CTP-A Duplex (Peristaltic Pumps)CTPB2LSA-PAP1-XXXXX 7 80 NorpreneCTPB3LSA-PAP1-XXXXX 16 70 NorpreneCTPB4LSA-PAP1-XXXXX 26 50 NorpreneCTPB6LSA-PAP1-XXXXX 60 40 Norprene

Series CTP-AE Simplex (Peristaltic Pumps)CTPA2HEA-PAP1-XXXXX 3.5 125 NorpreneCTPA2LEA-PAP1-XXXXX 3.5 80 NorpreneCTPA3HEA-PAP1-XXXXX 8 110 NorpreneCTPA3LEA-PAP1-XXXXX 8 70 NorpreneCTPA4HEA-PAP1-XXXXX 13 100 NorpreneCTPA4LEA-PAP1-XXXXX 13 50 NorpreneCTPA6LEA-PAP1-XXXXX 30 40 NorpreneCTPA6HEA-PAP1-XXXXX 30 80 Norprene

Series CTP-AE Duplex (Peristaltic Pumps)CTPB2LEA-PAP1-XXXXX 7 80 NorpreneCTPB3LEA-PAP1-XXXXX 16 70 NorpreneCTPB4LEA-PAP1-XXXXX 26 50 NorpreneCTPB6LEA-PAP1-XXXXX 60 40 Norprene

Series CTP-D Simplex (Peristaltic Pumps)CTPD2HSA-PAP1-XXXXX 7 125 NorpreneCTPD3HSA-PAP1-XXXXX 16 110 NorpreneCTPD4HSA-PAP1-XXXXX 26 100 NorpreneCTPD6HSA-PAP1-XXXXX 60 80 Norprene

Series CTP-D Duplex (Peristaltic Pumps)CTPE2HSA-PAP1-XXXXX 14 125 NorpreneCTPE3HSA-PAP1-XXXXX 32 110 NorpreneCTPE4HSA-PAP1-XXXXX 52 100 NorpreneCTPE6HSA-PAP1-XXXXX 120 80 Norprene

Chem-Tech Prime Performance™ PumpsThe new Chem-Tech Prime Performance™ pump combinesPulsafeeder’s proven degassing technology with thedurability and dependability that has earned Chem-Tech®

pumps the respect of water treatment professionals aroundthe world. The result is a series of positive displacementdiaphragm metering pumps that are totally self priming andmaintain their prime even in the most demanding waterconditioning and water treatment applications. Pump sizesare 15, 24, or 30 GPD @ 100 PSI and driven by 115VACmotors.

Series CTP (Peristaltic Pumps)The Series CTP offers a bold new look in reliability andvalue and is available in three control options offering feedrates up to 60 GPD (9.5L PH) with pressures to 125 PSI ( 8.6bar).

The Series CTP-A includes a percentage dial for reliableoperation and adjustable feed rates in 5-second increments.

The Series CTP AE is a 100% fixed rate economy modelwith an off-on dial for applications requiring constant feedand easy use.

Both Series CTP-A and Series CTP-AE models are availablewith optional 7-day timers for biocide feed or other timedapplications.

For applications requiring precise feed rates, the SeriesCTP-D offers digital control from 10% to 100% up to 60 GPD(9.5LPH). Adjustable in 1% increments, the Series CTP-Dprovides maximum control for demanding applications.

Simplex and duplex head configurations are both available.

*Standard Duplex models are of like pressure and flow rate

Peristaltic Tubing Option. - FLURAN® Severe Environment TubingThe tubing option is the sixth position in the model number, which is coded as “H” or “L” in thestandard CTP models. Standard tubing on all models is norprene. The FLURAN tubing optionis not available on CTP-A/AE duplex models or on models with a max flow rate greater than24 GPD. Max pressure rating with FLURAN tubing is 60 PSl. When ordering FLURAN tubing,replace the “L” or “H” in the model number with “F”.Pos. 5&6 CTP-A/AE Models CTP-D Models2F 3 GPD 7 GPD3F 8 GPD 16 GPD4F 13 GPD 26 GPD

Control OptionsThe control option is the seventh position in the model number, which is coded asan “S” in the standard Series CTP-A / CTP-D and as “E” in the standard SeriesCTP-AE. When ordering one of the following options, replace the “S” or “E” with theappropriate control option code listed below.Position 7 DescriptionT 7 Day Mechanical Timer (2 hr. increments) with Series CTP-AR 7 Day Mechanical Timer (2 hr. increments) with Series CTP-AED 7 Day – 8 Event Electronic Timer (1 min. increments) with

Series CTP-A / CTP-DC 7 Day – 8 Event Electronic Timer (1 min. increments) with

Series CTP-AE

68 CHEMICAL FEED SYSTEMS AND ACCESSORIES - METERING PUMPS

LMI® Series Chemical Metering Pumps



Series A, B and C LMI® Chemical Metering Pumps have been an industry

standard for over 20 years. The familiar yellow and black pumps have a rugged,

totally enclosed, chemically resistant housing for protection in the harshest

environments. Encapsulated electronics and a rigid housing and stroke bracket

ensure years of precise, repeatable performance.

The Series P Metering Pump is designed for more economical chemical injection.

The totally enclosed, chemically resistant housing and encapsulated electronics

provide the performance and long life. Dual manual control of stroke speed and

length and fixed speed versions are available for simple manual or on/off control.


Catalog # GPH PSI Head & Fittings Repair Kit Part Catalog #A Series

AA141-155S .58 250 PP SP-U9AA151-95S 1 110 PP SP-U1AA151-392SI 1 110 PVDF/PVDF RPM-392AA161-362SI 2 50 PVDF/PVDF RPM-362AA171-352SI .42 140 PVDF/PVDF RPM-352AA741-352SI .42 140 PVDF/PVDF RPM-352AA751-392SI 1 110 PVDF/PVDF RPM-392AA771-352SI .42 140 PVDF/PVDF RPM-352AA941-352SI .58 250 PVDF/PVDF RPM-352AA951-392SI 1 110 PVDF/PVDF RPM-392AA971-352SI .42 140 PVDF/PVDF RPM-352

B SeriesB111-392SI 1.6 150 PVDF/PVDF RPM-392B121-393SI 2.5 100 PVDF/PVDF RPM-393B721-490SI 2.5 100 Acrylic/PVC RPM-490B911-398SI 1.6 150 PVC/PVC RPM-398B921-393BI 2.5 100 PVDF/PVDF RPM-393

C SeriesC101-94S 1.3 300 PVC/PVC SP-U1C111-75S 2.5 150 PP SP-U2C121-362BI 4 100 PVDF/PVDF RPM-362C131-313BI 8 60 PVDF/PVDF RPM-313C141-35T 20 25 PP SP-U6C701-94S 1.3 300 PVC/PVC SP-U1C731-20S 8 60 Acrylic/PVC SP-20C771-20S 10 80 Acrylic/PVC SP-20C911-363BI 2.5 150 PVDF/PVDF RPM-363C921-363BI 4 100 PVDF/PVDF RPM-363C931-313SI 8 60 PVDF/PVDF RPM-313

P SeriesP021-352BI .21 150 PVDF/PVDF RPM-352P121-352SI .21 150 PVDF/PVDF RPM-352P131-392SI .42 110 PVDF/PVDF RPM-392P141-352SI .58 250 PVDF/PVDF RPM-352P151-392BI 1 110 PVDF/PVDF RPM-392P161-362BI 2 50 PVDF/PVDF RPM-362P741-352BI .58 250 PVDF/PVDF RPM-352P751-392BI 1 110 PVDF/PVDF RPM-392P761-362BI 2 50 PVDF/PVDF RPM-362

Control Options:Type “9” control is designed for easyintegration into chemical feed systems.The stroke rate may be controlledmanually or by an external signalgenerated by a flowmeter, controller,transmitter, PLC or other device. Divideor multiply a digital (pulse) input orprogram a response to a milliamp (4-20,0-20, 20-4, 20-0) input. The optional Digi-Pulse Flow Monitor verifies chemical flowand provides an alarm output.

Type “7” control is designed for moreeconomical systems. The stroke rate maybe controlled manually or by a digitalinput. The optional Micropace ControlModules enable the user to divide ormultiply a digital input or respond directlyand proportionally to a 4 - 20 milliampinput.

Type “1” control is designed for accuratechemical feed where manual or on/offcontrol is all that is required. Dual manualcontrol of stroke speed and stroke lengthis provided.

NOTE: S and SI suffix indicate 4-Function ValveBI suffix indicate Bleed Valve

*Please contact Technical Support for additional pump selections LMI Part # System example: AA151-392SIAA= Pump Series1= Control Code5= Output Code1= Voltage Code3= LiquiPro Series9= Head Size2= MaterialS= Valve CodeI= Tubing Code

69CHEMICAL FEED SYSTEMS AND ACCESSORIES - METERING PUMPS

PULSAtron® Chemical Metering Pumps




Siemens offers a vide variety of PULSAtron® metering pumps. After more than 10

years of product evolution, the PULSAtron® standard continues to set the pace

with the recent introduction of the DG/5FV degas valve. PULSAtron® pumps can

successfully handle a variety of gaseous solutions previously relegated to other

metering technologies. The Pulsatron® family consists of six unique Series with

76 flow and pressure ranges to choose. Most models include our standard Bleed

Valve assembly, foot strainer, injection valve and tubing. No matter what your

application, choose the PULSAtron® metering pump that is right for you.


Catalog # GPH PSI Head & Fittings KOP Kit Catalog #

Series MP LMK2TA-KTC1-500 3 300 PVDF K2KTC1LMB2TA-KTC1-500 5 250 PVDF K2KTC1LMD3TA-KTC1-500 11 250 PVDF K3KTC1LMF4TA-KTC1-500 20 250 PVDF K4KTC1LMH4TA-KTC1-500 40 250 PVDF K4KTC1

Series E PlusLPA2SA-KTC1 6 150 PVDF K2KTC1LPB3SA-KTC1 12 150 PVDF K3KTC1LPD4SA-KTC1 21 150 PVDF K4KTC1LPG4SA-KTC1 42 150 PVDF K4KTC1LPH5SA-KTC3 75 150 PVDF K5KTC3LPH6SA-KTC3 120 100 PVDF K6KTC3LPH7SA-KTC3 240 35 PVDF K7KTC3LPH8SA-WTCB 500 20 PVDF K8WTCB

Series ELPB2SA-KTC1 5 250 PVDF K2KTC1LPD3SA-KTC1 11 250 PVDF K3KTC1LPF4SA-KTC1 20 250 PVDF K4KTC1LPH4SA-KTC1 40 250 PVDF K4KTC1

Series A PlusLB02SA-VTC1 6 150 PVC K2VTC1LB03SA-VTC1 12 150 PVC K3VTC1LB04SA-VTC1 22 100 PVC K4VTC1LB64SA-VTC1 30 100 PVC K4VTC1

Series C PlusLD02SA-VTC1 6 80 PVC K2VTC1LD03SA-VTC1 12 80 PVC K3VTC1LD04SA-VTC1 22 80 PVC K4VTC1LD54SA-VTC1 30 80 PVC K4VTC1

Series CLC02SA-VTC1 6 80 PVC K2VTC1LC03SA-VTC1 12 80 PVC K3VTC1LC04SA-VTC1 22 80 PVC K4VTC1LC54SA-VTC1 30 80 PVC K4VTC1

Series MPThe Series MP is a true microprocessor controlled instrument forprecise and accurate metering control. Series MP includeautomatic control via 4-20mA or 20-4mA inputs, external pace withstop feature and 16-character LCD display.

Series E PlusThe Series E Plus offers manual control over stroke length andstroke rate as standard with the option to choose between 4-20mAor external pace inputs for automatic control.

Series EThe Series E offers manual function controls over stroke lengthand stroke rate providing a turn down ratio 100:1.

Series A PlusThe Series A Plus offers manual control over stroke length andstroke rate as standard with the option to select external pace forautomatic control.

Series C PlusLike the Series A Plus, the Series C Plus offers manual controlover stroke length and stroke rate as standard with the option toselect external pace for automatic control.

Series CThe Series C offers manual on-line stroke length adjustment withfixed stroke rate. Optional control features include external pace achoice between momentary on/off switch for priming the pump ora toggle on/off switch for manual override of all control functions.

NOTE: The -500 indicate 5-Function Bleed Valve

*Please contact Technical Support for additional pump selections

70




PULSAtron® Plus Chemical Metering Pumps

Water treatment professionals are under constant pressure to understand newchemical treatment programs. While some applications require sophisticatedcontrol systems with multi-parameter inputs and outputs, many installations canbe satisfied with a simpler approach. The PULSAtron® Plus is the ideal choicewhen basic control is all that is required.

PULSAtron® Plus is a unique family of products that combine basic controlfunctions into a PULSAtron® pump, eliminating the need for separate pieces ofequipment. Available across a full range of pump capacities and pressure ratings,each member of the PULSAtron® Plus family incorporates a variety of controlfeatures that target specific applications.


Catalog # GPH PSI Head & Fittings DescriptionSeries CW

LWO2RAVHC12XXXX .25 150 PVC/Hypalon Rising Set Point,LWO3RAVHC12XXXX .5 150 PVC/Hypalon ll5V, .25” IDLWO4RAVHC12XXXX 1 100 PVC/Hypalon Tubing, SSLW64RAVHCI2XXXX 1.25 100 PVC/Hypalon Sensor w/ 8.5’

Cable, No FlowSwitch

Series CLLLO2RAVHCT2XXXX .25 150 PVC/Hypalon Rising Set Point,LLO3RAVHCI2XXXX .5 150 PVC/Hypalon ll5V, .25” IDLLO4RAVHC12XXXX 1 100 PVC/Hypalon Tubing, SSLL64RAVHC12XXXX 1.25 100 PVC/Hypalon Sensor w/ 8.5’

Cable, No FlowSwitch

Series WTLQ02XAVHClXXXXX .25 150 PVC/Hypalon 115V, .25"LQ03XAVHCTXXXXX .5 150 PVC/Hypalon Tubing, No FlowLQ04XAVHCIXXXXX 1 100 PVC/Hypalon SwitchLQ64XAVHClXXXXX 1.25 100 PVC/Hypalon

Series T7LCl3BAVHClXXX .5 100 PVC/Hypalon 115V, .25"LCl4BAVHCTXXX 1 100 PVC/Hypalon TubingLC64BAVHC1XXX 1.25 100 PVC/HypalonLC44BAVHClXXX 2 50 PVC/Hypalon

Series ETLTB2SAVHCTXXX .21 250 PVC/Hypalon Manual On/Off,LTF4SAVHCIXXX .85 250 PVC/Hypalon 115V, .25"LTH4SAVHCIXXX 1.70 250 PVC/Hypalon TubingLTA2SAVHC1XXX .25 150 PVC/HypalonLTB3SAVHClXXX .50 150 PVC/HypalonLTD4SAVHClXXX .90 150 PVC/HypalonLTG4SAVHClXXX 1.75 150 PVC/HypalonLTHSSAVHC1XXX 3.15 150 PVC/HypalonLTA3SAVHC1XXX .50 100 PVC/HypalonLTB4SAVHC1XXX 1 100 PVC/HypalonLTE4SAVHC1XXX 1.85 100 PVC/HypalonLTH6SAVHC1XXX 5 100 PVC/HypalonLTH7SAVHCIXXX 10 35 PVC/HypalonLTH8SAVHClXXX 21 20 PVC/Hypalon

Series CW: Conductivity Control with Water Meter FeedThe Series CW provides conductivity control with a water meterfeed. Bleed is initiated when the conductivity level reaches theuser specified set point. Chemical feed is initiated and controlledby input from a water meter. The Series CW includes a solenoidactuated metering pump, conductivity sensor, bleed relay and adry contact input for water meter control.

Series CL: Conductivity Control with Limit TimerThe Series CL provides conductivity monitoring and control with aLimit Timer that controls the feed time. Tower feed and bleed areinitiated when the conductivity levels reaches the user-specifiedset point. The programmable limit timer allows the operator tospecify the maximum pumping time for the feed cycle. The SeriesCL includes a conductivity sensor, bleed relay and a user-programmable limit timer.

Series WT: Feed & Bleed Control with Water Meter InputThe Series WT provides feed and bleed control with a watermeter input. The feed and bleed cycles are initiated and controlledby input form the water meter. Separate programmable pulsetimers control the pump and bleed relay. The Series WT includesa flow input, water meter input and two programmable pulsetimers.

Series T7: Feed Control with 7 Day TimerThe Series T7 was designed to control the feeding of biocide orother product that must be fed on a timed schedule. The SeriesT7 includes a 7-day programmable timer and clock with the abilityto control up to 8 on/off cycles per day. Each timed event can beset to run any day of the week on a 7-day cycle. The feed cycle isinitiated and controlled by the user programmable timer.

Series ET: Feed Control with Water Meter InputThe Series ET provides feed control with input from a water meterinput. When the count exceeds a set value (either 1 or 10), thepump starts. The pump will continue to run for an adjustable timeperiod. The Series ET includes both input and output water meterconnections at the front panel. The output connection provides anisolated dry contact output of the water meter contact to operateadditional pumps or timers off the same water meter.

71





Wallace & Tiernan® Metering PumpsCHEM-AD® XL Diaphragm Metering Pump

The CHEM-AD® XL range of metering pumps are mechanically actuateddiaphragm dumps with integrated controls capabilities. Capacities up to 238 GPH

Key Controls & Features• On-off Button • Mechanical Stroke Length Control • Stroke Frequency Control, Level Switch Input (low level and empty) • Power Cord and Plug up to 3.5 GPH • External Analog Scalable Input (0/4-20 mA), (20-0/4mA)• Input Signal Scaling, External Pulse Input• Remote On / Off • Batch Mode & Pulse Storage • Alarm Output & Stroke Pulse Output • Membrane Touch Pad Operator Interface • Flow Monitoring (External OGM required)• Integral Back-lit Digital Display• Password Protection, Capacity display, Flow Totalizing


CHEM-AD® XL Diaphragm Metering Pumps with Integrated ControlsCatalog # GPH PSI DescriptionCM1A4E60KFC9931 0.44 120 Automatic E60 Speed Controls with degas system, PVDF Liquid Ends, Ceramic Ball, Viton® O-ringsCM1B4E60KFC9933 1.36 120 Automatic E60 Speed Controls, PVDF Liquid Ends, Ceramic Ball, Viton O-ringsCM1B6E60KFC9933 3.5 60CM1C1E60PFC9936 5 120 Automatic E60 Speed Controls, PP Liquid Ends, Ceramic Ball, Viton O-ringsCM1C3E60PFC9936 17 120CM1C5E60PFC9939 38 35CM1D1E60PFC9939 44 120

AccessoriesSuction Lance: Includes Dual Level Switches, Foot Valve, and Strainer

AAB5197 Suction Lance, used in Series A & B all sizesAAB5206 29.5" long, PVC Pipe, Viton® O-rings, Glass Ball

44.3" long, PVC Pipe, Viton O-rings, Glass BallAAC2411 Thrust Piece – one (1), required per suction lance with Series A

Use DUO hose to connect to suction valve.AAC2423 Adapter – one (1), required per suction lance with Series B

Use 3/8" OD x 1/4" ID tubing to connect to suction valveAAB7732 Suction Lance, used in Series C1, C2 & C3 (5 to 17 GPH)

55.1" long, PVC Pipe, Viton O-rings, Glass BallAAC8111 Connection Set – two (2), required per suction lance with Series C

Use 1/4" OD x 3/8" ID tubing to connect to the suction valve

Multifunction Valve (Functions include – Back Pressure, Pressure Relief, Draining & Priming.)AAB5248 Multifunction Valve, used in Series B all sizes (0.44 to 3.5 GPH)

Back Pressure Range, 15 – 75 PSI, PVDF Housing, Viton® O-rings.AAC5663 Thrust Piece – two (2) required per valve with Series BAAB6973 Multifunction Valve, used in Series C1, C2 & C3 (5 to 17 GPH)

Back Pressure Range, 15 – 75 PSI, PVDF Housing, Viton O-rings. AAC2513 Adapter, two (2) required per valve on Series C1, C2 & C3

Rigid piping installation AAC8111 Connection Set – two (2) required per valve on Series C1, C2 & C3

Flexible tubing connection. AAB7003 Multifunction Valve, used in Series C4 & C5 (25 to 38 GPH)

Back Pressure Range, 15 – 75 PSI, PVDF Housing, Viton O-rings. AAC8132 Adapter, two (2) required per valve on Series C4 & C5, Rigid piping installation

Wall Mount BracketAAC7594 Wall Mounting Bracket (ABS) for Series A, B & C

72




Wallace & Tiernan® Metering PumpsENCORE® 700 Diaphragm Metering Pumps


The Encore® 700 Diaphragm Metering Pump combines the robustness ofhydraulic pump with CONTROL FLEXIBILITY diaphragm pumps with theunparalleled economy, simplicity, and serviceability of a mechanical pump. TheEncore® 700 pump is engineered to handle industrial and municipal meteringapplications in water and wastewater treatment, swimming pools, foodprocessing, chemical processing, brewing and distillation, and agriculture.

• Non-loss-motion variable eccentric stroke adjust mechanism rendersefficiency, longevity, and reliability, as well as a smooth discharge pattern.

• Precision-engineered liquid ends meter mild solutions, aggressivechemicals, high-viscosity polymers, and slurries with greater efficiency thanconventional liquid ends.

• Clear PVC cartridge valves for fast service with no piping disturbances andbuilt-in visual indication of operation.

• Premium composite diaphragm design ensures high metering accuracy,even at varying discharge pressures.

Encore® 700 Diaphragm Metering Pump

Catalog # GPM PSI PVC Head / PTFE Diaphragm / Hypalon O-ring / Manual Control

AAC1751 5 175 1/4 HP, 110VAC 1PH MOTOR

AAC1757 24 175 1/4 HP, 110VAC 1PH MOTOR

AAC1763 45 150

3/4 HP, 110VAC 1PH MOTORAAC1769 77 130

AAC1775 180 75

For higher capacities and options consult factory.

Additional metering pumps and water treatment accessories from leading manufactures are available.Contact Siemens Water Technologies for a complete list of options.

73CHEMICAL FEED SYSTEMS AND ACCESSORIES - METERING PUMPS

Wallace & Tiernan® Metering PumpsChemtube® PPS Peristaltic Pumps




In the industrial marketplace, the Chemtube® PPS hose pumps are suitable formetering virtually any chemical to the point of application. Reliable feed ratesare maintained in either continuous or intermittent duty cycles.

There are many industrial applications for the Chemtube® PPS Hose pumps thatgo beyond our traditional metering pump capabilities. Chemtube® PPS pumpsare ideal for,

• Multiphase fluids• Shear Sensitive products & high viscosity products• Slurries & abrasive products with high solid contents • Highly corrosive products• High Suction Lift conditions• Self-priming design which will not air-lock


Chemtube® PPS :S Series

Pump Catalog # GPH PSI RPM Hose and Connection Material Repair Kit Part No.

CPS5B3GRP 2.2

9025

Natural Rubber and PVC Connections

Hose: AAC7676Repair Kit: AAC7931

CPS10B3GRP 7.0Hose: AAB7676Repair Kit: AAC7931

CPS16B3GRP 25Hose: AAB7691Repair Kit: AAC7934

CPS26B3GRP 115 22Hose: AAB7706Repair Kit: AAC7937

CPS5B3GHP 2.2

9025

Hypalon Hose and PVCConnections

Hose: AAC1799Repair Kit: AAC7931

CPS10B3GHP 7.0Hose: AAC1799Repair Kit: AAC7931

CPS16B3GHP 25Hose: AAC1802Repair Kit: AAC7934

CPS26B3GHP 116 22Hose: AAC1805Repair Kit: AAC7937

Pulsation Dampener (max 150 PSI )

Pump Model No. Catalog # Body and Diaphragm Material Connection Size

S Series – S5 AAB7874

PVC / Hypalon

1/2” NPT (F)S Series – S10 AAB8657

S Series – S16 AAB8858 3/4” NPT (F)

S Series – S26 AAB8876 1” NPT (F)

Pressure Relief Valve (10 – 150 PSI)

S Series S5, S10, S16, S26 AAB8816 PVC / PTFE / EPDM 1/2” NPT (F)

Note: 1: All Chemtube® PPS models include ,S Series Pump with 5/10/16/26 mm hose, Variable Frequency Drive with

NEMA 4X enclosure, 230 VAC/60Hz/3Ph, Inverter Duty Motor 230 VAC/60Hz, PVC connections, Natural RubberHose or Hypalon Hose, Leak Detector, One spare hose, Two year warranty excluding hose.

2: Refer to chemical compatibility chart for Hose material selection. Consult factory for special requirements.3: For higher capacities and options consult factory.

Accessory required for Chemtube® PPS Hose Pumps

74



CHEMICAL FEED SYSTEMS AND ACCESSORIES - INSTRUMENTATION & CONTROLS

Instrumentation & Controls

Siemens offers a wide selection of instrumentation and control for cooling waterand process water applications. Whether you need to control pH, ORP,conductivity, or more, Siemens has a controller or monitor to fit the application.

Ultrameter™ Series Instruments

While priced like affordable single-parameter instruments,the Ultrameter™ does the job of three, four or even sixinstruments. All Ultrameter™ models deliver performanceof ±1% of reading (not merely full scale). This high level ofaccuracy has been achieved through advanced four-electrode conductivity cell technology, a unique pH/ORPsensor and powerful microprocessor-based circuitry. Withdisplayed values of up to 9999, the full four-digit LCDensures resolution levels never before possible in suchaffordable instruments.

Ultrameter™ InstrumentsCatalog # Mode # DescriptionMETMYRNL4P 4PII Conductivity, TDS, Resistivity & TemperatureMETMYRNL6P 6PII Conductivity, TDS, pH, Resistivity, Temperature & ORP

TMS-561 Turbidimeter

The TMS 561 Turbidimeter is specifically designed for continuouson-line measurement of turbidity in filtered or raw water inmunicipal and industrial water treatment plants, as well as finaleffluent in wastewater applications. Utilizing an EPA-approved,reusable, primary standard, routine calibration is fast andinexpensive. For poor-quality water, an ultrasonic, self-cleaningsystem is available to reduce maintenance. An optional dataacquisition system and software package allows networking ofup to 255 turbidimeters into a single computer. The softwareprovides graphical trending, alarms, and filter analysis.

Depolox® 3 plus

The Depolox® 3 plus residual analyzer continuouslymeasures free or total (combined) chlorine in drinkingwater applications. Utilizing proven and universallyaccepted amperometric measurement technology, theDepolox® 3 plus analyzer directly measures chlorineresiduals and provides a 4- 20 mA output signal forcontrol or recording purposes. Integral alarm relays areincluded. The Depolox® 3 plus analyzer is also availablein a dual input arrangement for measuring pH orfluoride, along with chlorine.

*Please contact Technical Support for Depolox®

analyzer options

TMS-561 TurbidimeterCatalog # Light Range Ultrasonic

CleaningTMS-561 BW White 0-1000 NTU N/ATMS-561 BR Infrared 0-1000 NTU N/ATMS-561 CW White 0-100 NTU StandardTMS-561 CR Infrared 0-100 NTU StandardTMS-561 DW White 0-1000 NTU StandardTMS-561 DR Infrared 0-1000 NTU Standard

Contact Technical Support for additionalinformation on our entire chemical feedand control offerings including:

• Gas Feed Systems• Dry Feed Systems• On-Site Electrochlorination• Liquid Metering Systems• UV Systems• Custom Chemical Feed Systems• Analytical Instrumentation• Chemical Induction Systems• Flow Measurement & Control

75CHEMICAL FEED SYSTEMS AND ACCESSORIES - INSTRUMENTATION & CONTROLS

Instrumentation & Controls(continued)




Siemens offers a wide selection of instrumentation and control for cooling waterand process water applications. Whether you need to control pH, ORP,conductivity, or more, Siemens has a controller or monitor to fit the application.

Strantrol® Feed Verification Controller (FVC Series)

The Strantrol® FVC provides accurate and reliable dosingmeasurement for a wide selection of metering pumps.The Strantrol® FVC controls and verifies the liquidchemical feed rate of actual chemical dispensed. Aproportional feedback signal changes the stroke rate ofthe pump compensating for changes in pump output.

Strantrol® 916 Controller Series

Strantrol® 916P ControllerThe Strantrol® 916P Controller accurately and reliablymaintains pH and conductivity control in industrialprocess water and cooling water applications. The 916PController combines innovative sensor technology withunique control schemes to offer an unequaled solutionfor industrial water treatment applications.

Strantrol® 916O ControllerThe Strantrol® 916O Controller is configured for HighResolution Redox® sensing and conductivity control,which can dramatically improve disinfection ofindustrial process water and cooling water applications.

Strantrol® 885, 886 and 887 Controllers

The Strantrol® 885, 886 and 887 series of controllersoffer the reliability and precision that only comes with aStrantrol® product. These single channel controllers areavailable for ORP, pH or conductivity monitoring andcontrol.

LMI® Controllers

LMI® controllers are simple to setup and operate. Allwiring and connections are included. Choose form pH,conductivity or ORP controllers for a variety ofapplications.

Strantrol® Feed Verification ControllersCatalog # Min GPH Max GPHFVC-1.6 .079 1.58FVC-16 1.58 15.85FVC-32 3.17 31.7FVC-63 6.34 63.4FVC-158 15.85 158.5FVC-317 31.7 317.0

Strantrol® 916 ControllersCatalog # Description916P Conductivity / pH Controller System916O Conductivity / ORP Controller System

LMI® ControllersCatalog # DescriptionDC-5500 Conductivity Controller for Cooling with

Biocide Timers & Remote CommunicationsDC-4000 Conductivity Controller for Cooling or Boiler

(Bleed & Feed)DC-4500 Conductivity Controller for Cooling with

Biocide TimersDP-5000 pH Controller DR-5000 ORP Controller

Strantrol® 88X ControllersCatalog # DescriptionStrantrol 885 Conductivity / Temperature Controller Strantrol 886 pH Controller Strantrol 887 High Resolution Redox® (ORP) Controller

76 CHEMICAL FEED SYSTEMS AND ACCESSORIES - INSTRUMENTATION & CONTROLS

PULSAtrol® Series



The PULSAtrol® series economical and reliable controllers are easy to use andrequire minimum maintenance.


MC9000 Series ControllersCatalog # DescriptionMTC1PTXXXX Prewire, 115VAC, with sensor tee

MC9200 Series ControllersMC9210XXXXXX Conductivity ControlMC9220XXXXXX pH ControlMC9230XXXXXX Conductivity and pH Control

MC9300 Series ControllersMC9310XXXXXX Conductivity ControlMC9320XXXXXX pH ControlMC9330XXXXXX Conductivity and pH Control

MC9500 Series ControllersMC9510XXXXXX Conductivity ControlMC9520XXXXXX Conductivity and ORP ControlMC9530XXXXXX Conductivity and pH ControlMC9540XXXXXX Conductivity, make-up conductivity and pH ControlMC9550XXXXXX Conductivity (with make-up), pH and ORP COntrolMC9560XXXXXX Dual Conductivity for open loop (tower)

and closed loop (chiller)MC9570XXXXXX Dual Conductivity for dual cooling tower systems

PULSAtrol® MC9000 Series ControllersThe PULSAtrol® 9000 Series cooling tower controllers offer the most popular features asstandard without compromising flexibility. All controllers come standard with a complete flowassembly mounted to a polypropylene backboard.

MC9200 SeriesThe MC9200 Series includes as standard, a pre-wired selectable timer, alarm output relay, drycontact alarm output and water meter totalizer. Options available include up to two 28-day biocidetimers, single or dual 4-20mA outputs, communications and agency approvals (Contact factory foroptions).

MC9300 SeriesThe MC9300 Series includes as standard, four taggable timers, two water meter totalizers userconfigured as dry contact or hall effect, dry contact alarm relay and alarm output relay. Options include two 4-20mA outputs, conduit connection for power and relays, communications, language and agencyapprovals (Contact factory for options).

MC9500 SeriesThe MC9500 Series includes as standard, four taggable timers, two water meter totalizers userconfigured as dry contact or hall effect, four drum level inputs, dry contact alarm relay and alarmoutput relay. Options include two 4-20mA outputs, conduit connection for power and relays,communications, language and agency approvals (Contact factory for options).

77CHEMICAL FEED SYSTEMS AND ACCESSORIES - INSTRUMENTATION & CONTROLS

Boilers PULSAtrol® Series





MB9200 Series Boiler ControllersCatalog # DescriptionMB9210XXXXX Conductivity ControlMB9220XXXXX Dual Conductivity Control

MB9300 Series Boiler ControllersMB9210XXXXX Conductivity ControlMB9220XXXXX Dual Conductivity Control

MB9600 Series Boiler ControllersMB9610XXXXXX Conductivity ControlMB9620XXXXXX Dual Conductivity ControlMB9630XXXXXX Triple Conductivity ControlMB9640XXXXXX Conductivity Condensate / pH Control

Siemens now offers the PULSAtrol® Series of boiler control instrumentation.These economical and reliable controllers are easy to use and require minimummaintenance.

MB9200 SeriesThe MB9200 Series includes as standard, two selectable timers, alarmoutput relay, dry contact alarm output, water meter totalizer, stainlesssteel sensor and mounting hardware for each boiler. Options includesingle or dual 4-20mA outputs, communications and agency approvals(Contact factory for options).

MB9300 SeriesThe MB9300 Series includes as standard, four selectable timers, alarmoutput relay, dry contact alarm output, two water meter totalizers andtemperature compensated stainless steel sensors. Options include singleor dual 4-20mA outputs, communications, language and agencyapprovals (Contact factory for options).

MB9600 SeriesThe MB9600 Series includes as standard, three or four selectable timers,two water meter totalizers user configured as dry contact or hall effect,four single point drum level inputs, dry contact alarm relay, alarm outputrelay and temperature compensated stainless steel sensors. Optionsinclude up to four 4-20mA inputs and outputs, communications, languageand agency approvals (Contact factory for options).

78



Siemens now offers the Vision Series of process control instrumentation. TheVision Series product line is designed to handle a multitude of applications and ismodular and expandable. The innovative use of USB technology makes theseunits customizable. Soft keys allow for easy programming and flexibility.

Model UVThe Vision Series Model UV is a single system process controlinstrument. Included as standard are two IntelliSense® sensorconnections allowing for the use of one Multipurpose IntelliSense®sensor input/output and one general sensor IntelliSense® sensorinput (conductivity, torodial, pH or ORP); four selectable relays, onealarm relay, three taggable timers, one flow switch input, and oneinput suitable for use with dry contact or hall effect water meters.

Model LVThe Vision Series Model LV is a dual system process controlinstrument. As standard, it comes with three IntelliSense® sensorconnections (allowing for the use of three general sensor inputs, twogeneral sensor inputs and one multipurpose input/output, or onegeneral sensor input and two multipurpose inputs/outputs), fourselectable relays, one alarm relay, six taggable timers, two flowswitch inputs, and two inputs suitable for use with dry contact or halleffect water meters.

IntelliSense® Sensor PackageBy converting an analog input to a digital signal, the IntelliSense®sensor provides auto sensor recognition, eliminates drifting potentialand allows travel up to 1000 feet (when using a RS-422 connection).USB connections are limited to 15 feet. Each of the 5 availablesensory heads are color coded and measure a multitude of variables.NOTE: The multipurpose IntelliSense® sensor can only be used witha USB connection and consists of four functions (a contact input andoutput, and a 4-20mA input and output0, which can all be usedsimultaneously or independently.

Flow AssemblyThe flow assembly features 3/4" PVC plumbing with a flow switch andsample valve. When ordering the flow assembly you can specify ifyou would like it mounted on a panel with the process controlinstrument.

IntelliScan® Handheld Calibration UnitThe IntelliScan® Unit is a handheld device that revolutionizes thecalibration process by eliminating the need for manual data entry. Ithas an infrared port that allows calibration data to be transmitted tothe IntelliSense® sense form the IntelliScan® unit. The IntelliScan®unit comes with its own convenient carrying case and belt-clipattachment.

Vision UV Single System Process ControllerCatalog # DescriptionUVPSI XXX Prewire, 115VAC, No Communications, No PanelUVP2SXXX Prewire, 115VAC, Modem Connection, No PanelUVP3SXXX Prewire, 115VAC, Ethernet Connection, No Panel

Vision LV Dual System Process ControllerLVPI SXXX Prewire, 115VAC, No Communications, No PanelLVP2SXXX Prewire, 115VAC, Modem Connection, No PanelLVP3SXXX Prewire, 115VAC, Ethernet Connection, No Panel

Vision IntelliSense® Sensor PackageISPCSTDU015XXX Std. Conductivity Probe, USB Connection with 15' CableISPTSTDU015XXX Std. Toroidal Probe, USB Connection with 15' CableISPPSTDU015XXX Std. pH Probe, USB Connection with 15' CableISPOSTDU015XXX Std. ORP Probe, USB Connection with 15' CableISPMXXXU015XXX No Probe (for MPIO only), USB Connection with 15' CableISPCCBSU015XXX Boiler Conductivity Probe, USB Connection with 15' Cable

Vision Flow AssemblyFAOTXL No Sensor Tee, No Panel, Left Flow (Right Flow = XR)FA1TXL One Sensor Tee, No Panel, Left FlowFA2TXL Two Sensor Tees, No Panel, Left FlowFA3TXL Three Sensor Tees, No Panel, Left Flow

Vision IntelliScan® Handheld Calibration UnitISCNCDXXX IntelliScan® Unit Type - ConductivityISCNPOXXX IntelliScan® Unit Type - ph/ORPISCNCBXXX Combo (one conductivity sensor & one pH/ORP sensor)

Custom Control Package Design Procedure1. Start by selecting a UV or LV controller.2. Select the desired IntelliSense package.3. If ordering a LV unit and more than three USB inputs/outputs are

required, select a USB Hub. Please contact the factory for applicationreview and design assistance.

4. If ordering a LV unit and more than four relays are required, select aRelay Expansion Box. Please contact the factory for application reviewand design assistance.

5. Choose a flow assembly with or without a panel mount.6. Accessorize. Make your calibration high-tech. Check out the IntelliScan®

handheld.

CHEMICAL FEED SYSTEMS AND ACCESSORIES - INSTRUMENTATION & CONTROLS

Vision Series Process Control Instrumentation

79




CHEMICAL FEED SYSTEMS AND ACCESSORIES - STORAGE AND BULK TANKS

Reverse Osmosis & Bleach Storage Tanks

Siemens offers a wide variety of storage and bulk tanks for RO systems andbleach. Each RO tank is constructed of HDPE and bleach tanks are HDXLPE and israted at 1.90 S.G. with OR1000 lining. All tanks are NSF Certified and fittingpackages are available. Secondary containment is also offered as well as heattracing and seismic restraints.


Reverse Osmosis Water Storage Tanks – HDPECatalog # Nominal Capacity Approx. O.D. Approx Overall Lid Size

Height

1006150 6150 10' – 2" 12' – 4" 24"1005050 5050 7' – 10" 16' – 0" 24"1004150 4150 8' – 6" 12' – 6" 24"1003000 3000 7' – 1" 11' – 8" 24"1002000 2000 7' – 1" 8' – 6" 24"1001150 1150 5' – 4" 8' – 2" 10"/19"1100475 475 4' – 0" 6' – 3" 17"1000100 100 1' – 11" 5' – 7" 7"

Reverse Osmosis Water Storage Tanks – FittingsCatalog # DescriptionVenting7457 3" Mushroom Vent – PPPump Suction7117 2" BHF PVC/EPDM4844 Nipple 2" x Short PVC3188 2" T x T Spears Compact Ball Valve PVCLevel7117 2" BHF PVC/EPDMFill7117 2" BHF PVC/EPDMOptional Overflow7117 2" BHF PVC/EPDM

Bleach Storage & Bulk TanksCatalog # Nominal Capacity Approx. O.D. Approx. Overall Lid Size Secondary

Height Containment Catalog #

1000540 540 4' – 0" 6' – 9" 19" 15007001000805 805 4' – 0" 9' – 11" 19" 15009601000905 907 5' – 4" 6' – 9" 19" 15012001001300 1300 7' – 1" 5' – 10" 19" 15020001001400 1400 5' – 4" 10' – 0" 19" 15017501002000 2000 7' – 1" 8' – 6" 24" 15026501002650 2650 8' – 0" 8' – 9" 24" 15033501003900 3900 7' – 10" 12' – 9" 24" 1504500

Note: Larger tanks sizes are available. Contact Stranco® at 800-882-6466 for additional information.

80 CLARIFIERS

Permutit® Package PrecipitatorsFlow Rates from 44 to 920 gpm



Package Precipitators offer an efficient means for removing impurities from a liquid byprecipitation, adsorption, settling and upflow filtration. Used for the initial treatmentof water to reduce suspended impurities, turbidity, color, hardness, iron andmanganese, the Package Precipitator provides high rate clarification in minimumspace. Adaptable to variable flow rates, it offers excellent chemical efficiency andproduces low turbidity effluent. Optional Chevron shape, high rate tube settlers offerover 35% increased flow rate.

• Low turbidity precipitator effluent is virtually always superior to the effluent ofconventional clarifiers/softeners

• The action of suspended sludge in the mixing zone and upflow through the sludgeblanket utilizes chemicals more efficiently

• Large, slow moving agitator blades completely mix the water, chemicals and sludge

• The low turbidity effluent of a precipitator places little load on downstream filters,thus permitting longer filter runs and lower treatment costs

SYSTEM SPECIFICATIONSModel Number 1 2 3 4 5 6Maximum Flow Rate

Without Tube Settlers . . . . . . . . . . . . . . . . 44 gpm 88 gpm 132 gpm 175 gpm 220 gpm 250 gpmWith Tube Settlers . . . . . . . . . . . . . . . . . . 60 gpm 120 gpm 180 gpm 240 gpm 300 gpm 350 gpm

Surface Area . . . . . . . . . . . . . . . . . . . . . . . . 35 sq. ft. 70 sq. ft. 105 sq. ft. 140 sq. ft. 175 sq. ft. 200 sq. ft.Tube Settling Area . . . . . . . . . . . . . . . . . . . . 25 sq. ft. 50 sq. ft. 75 sq. ft. 100 sq. ft. 125 sq. ft. 150 sq. ft.Agitator Motor . . . . . . . . . . . . . . . . . . . . . . . 1/2 hp 1/2 hp 1/2 hp 1/2 hp 3/4 hp 3/4 hpInlet/Outlet Overflow Size . . . . . . . . . . . . . . 3” 4” 6” 6” 8” 8”Sludge, Blow-off & Flush-back Valve Size . . . . . . . . . . . . . . . . . . . . . . . . . . 1” 1-1/2” 1-1/2” 2” 2” 2”Detention (60 minutes). . . . . . . . . . . . . . . . . 2,600 gal. 5,200 gal. 7,800 gal. 10,400 gal. 13,000 gal. 15,000 gal.

System DimensionsW x L x H

inches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96x60x126 96x120x126 96x180x126 96x240x126 96x300x126 108x300x126cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244x153x320 244x305x320 244x457x320 244x610x320 244x762x320 275x762x320

Shipping Weightlb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6,000 9,000 12,000 15,000 18,000 19,000kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,722 4,082 5,454 6,804 8,165 8,618

Model Number 7 8 9 10 11 12Maximum Flow Rate

Without Tube Settlers . . . . . . . . . . . . . . . . 280 gpm 310 gpm 340 gpm 460 gpm 540 gpm 620 gpmWith Tube Settlers . . . . . . . . . . . . . . . . . . 400 gpm 450 gpm 500 gpm 680 gpm 800 gpm 920 gpm

Surface Area . . . . . . . . . . . . . . . . . . . . . . . . 225 sq. ft. 250 sq. ft. 275 sq. ft. 375 sq. ft. 440 sq. ft. 505 sq. ft.Tube Settling Area . . . . . . . . . . . . . . . . . . . . 175 sq. ft. 200 sq. ft. 225 sq. ft. 300 sq. ft. 350 sq. ft. 400 sq. ft.Agitator Motor . . . . . . . . . . . . . . . . . . . . . . . 3/4 hp 3/4 hp 3/4 hp 1 hp 1 hp 1-1/2 hpInlet/Outlet Overflow Size . . . . . . . . . . . . . . 8” 8” 10” 10” 12” 12”Sludge, Blow-off & Flush-back Valve Size . . . . . . . . . . . . . . . . . . . . . . . . . . 2” 2” 2” 2” 2” 3”Detention (60 minutes). . . . . . . . . . . . . . . . . 16,800 gal. 18,600 gal. 20,500 gal 27,700 gal. 32,500 gal. 37,350 gal.

System DimensionsW x L x H

inches . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120x300x126 132x300x126 144x300x126 144x408x126 144x480x126 144x552x126cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 305x762x320 335x762x320 366x762x320 366x1036x320 366x1219x320 366x1402x320

Shipping Weightlb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20,000 21,000 22,000 30,000 35,000 38,000kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9,072 9,526 9,980 13,608 15,876 17,237

ORDERING INFORMATIONFor Permutit® products and information contact 908-704-9027.

Chevron TubeSettler Supports

Treated WaterCollector

Agitator

Raw Water Inlet

Treated WaterOutlet

Overflow

DrainsSludgeBlowoff

81CLEAN-IN-PLACE SKIDS

CIP Series Cleaning SkidsFlow Rates from 30 to 225 gpm




SYSTEM SPECIFICATIONSModel Number CIP-30 CIP-60 CIP-90 CIP-150 CIP-225

Flow Rate at 60 psi . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 gpm 60 gpm 90 gpm 150 gpm 225 gpmTank Capacity (gallons) . . . . . . . . . . . . . . . . . . . . . . . . . 90 200 275 440 800Connection Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5" 2" 2" 3" 3"Base . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mobile Mobile Fixed Fixed Fixed

System DimensionsH x W x D*

Inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67x41x72 69x41x72 69x51x90 69x64x106 78x78x128cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26x16x28 27x16x28 27x20x35 27x25x42 31x31x50

Operating WeightIndustrial

lb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1250 2600 3500 6000 9500kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 567 1179 1588 2722 4309

Electrical RequirementsPump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 HP 5 HP 10 HP 10 HP 15 HPElectrical . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240/480V/60 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

CIP Series Cleaning Skids are designed for on-site cleaning of RO systems. They

can accommodate cleaning flow rates of 30–225 gpm and are compatible with

TFC or CA membrane elements.

• Factory assembled, tested and field-ready cleaning skids offer a convenient and

economical way to maximize your RO investment

• Rugged construction withstands cleaning chemicals

• CIP-30, CIP-60 are portable for quick and easy on-site cleaning


Catalog Number 67/CIP XX(X) – XXX Cleaning Skid Options (order as separate line item)

System Name . . . . . . . . . . . . . . 67/CIP 30 = 30 gpm Description Part Number60 = 60 gpm 240 = 240V, 60 Hz pH Monitor 24/S1900-17090 = 90 gpm 480 = 480V, 60 Hz High Temperature Switch 24/S1900-171150 = 150 gpm (Other voltages Flow Switch 24/S1900-172

Flow Rates . . . . . . . . . . . . . . . . . . . . . . 225 = 225 gpm available. Contact 1" x 25' Hose Kit 24/S1900-181Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . technical support) 1-1/2" x 25' Hose Kit 24/S1900-182

2" x 25' Hose Kit 24/S1900-1833" x 25' Hose Kit 24/S1900-184

Example: 67/CIP30-240 gpm system using 240 volts.


Continuous electrodeionization is a safe, chemical-free way to take RO (reverse

osmosis) water to a higher level of purity. CDI-LX™ systems are pre-engineered and

specifically designed to meet the demands of the pharmaceutical, power,

microelectronics and general industry customer. The standard CDI-LX™ systems

have flow rates from 2.5 to 180 gpm (0.57–40.88 m3/hr), combining single or

multiple (up to 8) CDI-LX™ modules on a frame with power supply, controllers,

piping, sample valves and cleaning connections. Flow and quality monitoring

instrumentation is standard. Remote I/O is also available as an option.

Features:

• Rugged construction • Easily validated

• Hot water sanitizable (HWS) units • Leak-free operation

available up to 185˚F (85˚C) • High operating pressure (up to 100 psi)

• High operating temperature • Low power consumption

(up to 45˚C; 113˚F)

82 CONTINUOUS DEIONIZATION (CDI®) SYSTEMS

CDI-LX™ SystemsFlow Rates from 2.5 to –180 gpm




Model Number CDILXH 1001 2401 3001 3002 3003 3004 3006 3008Number of Modules on Skid 1 1 1 2 3 4 6 8

Minimum Flow Rate gpm (m3/hr) 2.5 (.57) 6.25 (1.42) 7.5 (1.70) 15 (3.41) 22.5 (5.11) 30 (6.81) 45 (10.22) 60 (13.63)Nominal Flow Rate gpm (m3/hr) 5 (1.13) 12.5 (2.84) 15 (3.41) 30 (6.81) 45 (10.22) 60 (13.63) 90 (20.44) 120 (27.25)Maximum Flow Rate gpm (m3/hr) 7.5 (1.70) 18.75 (4.26) 22.5 (5.11) 45 (10.22) 67.5 (15.33) 90 (20.44) 135 (30.66) 180 (40.88)

Typical recovery 90-95% 90-95% 90-95% 90-95% 90-95% 90-95% 90-95% 90-95%

ConnectionsFeed 3/4” 1” 1” 1-1/2” 2” 2” 3" 3"Product 3/4” 1” 1” 1-1/2” 2” 2” 3" 3"Reject 1/2” 1/2” 1/2” 1/2” 1” 1” 1-1/2” 1-1/2”

Electrical Service RequiredVoltage 208/240V, 1 phase, 50/60 Hz 480V, 3 phase, 50/60 HzAmperage 15 40 40 20 30 40 60 80

System DimensionsL x D x H inches 40x33x77 40x33x77 40x33x77 40x33x77 75x40x83 75x40x83 130x40x78 130x40x78

cm 102x83x196 102x83x196 102x83x196 102x83x196 191x102x211 191x102x211 330x102x198 330x102x198Shipping Weight lb. (kg) (est.) 500 (227) 530 (240) 550 (250) 900 (408) 3000 (1361) 3300 (1497) 5000 (2268) 5600 (2540)


Catalog Number: CDILX X XX XX X X X

System Name CDILX

Number of Cell Pairs/Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . Number of Modules. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Feed and Product Plumbing Material . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Electrical Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

*Not all model combinations are available. Contact Siemens for specific CDI-LX™ applications beyond the standard specifications.To determine your order number, replace the X with one of the numbered options below it. “X” must be specified if option is not requested.


010203040608

102430

A = PVC, Sch. 80(Non HWS Model only)

D = 316L SS, Sanitary Tube (forHWS Model and X Models)

1 = 240V,1 Phase, 50/60 Hz

2 = 208V,1 Phase, 50/60 Hz

4 = 480V,3 Phase, 50/60 Hz

A = NEMA 12 withoutRemote I/O

B = NEMA 12 withRemote I/O

C = NEMA 4 withoutRemote I/O

D = NEMA 4 withRemote I/O

E = NEMA 4X withoutRemote I/O

F = NEMA 4X withRemote I/O

H = Hot Water Sanitizable (HWS)Module

X = Non-HWSModule

83CONTINUOUS ELECTRODEIONIZATIONSYSTEMS

CDI® Replacement Modules




CDI® Replacement modules are available for both older legacy CDI® Systems andcurrent standard CDI® Systems.

Available legacy CDI® modules: H-Series (H30, H60, H120, H240), P-Series (P-180)and Compact CDI® (C10, C20, C40) Systems. Unfortunately, the above H-Series andCompact CDI® modules cannot be replaced by LX or VNX modules due toincompatibilities with the power supply.

CDI® P-180 System Upgrade: Because of the cost savings and benefits associatedwith the CDI® LX Series, many existing P-180 customers are now upgrading to the LXSeries, and a complete upgrade kit is available. The kit is specifically designed toreplace the P-180 modules with minimal field retrofit labor required. The upgrade kitincludes simplified connections to match the existing P-180 system connections.

LX and VNX Modules: Replacement CDI® modules for current standard LX and VNXsystems.

Benefits of LX and VNX include:

• Offers the latest generation of continuous electrodeionization technology

• Offers a robust design for superior performance with the highest reliability in the industry

• Guarantees leak-free operation

• Uses the existing skid/footprint, power supplies, instruments and controls

H Series Model Numbers Replacement Module Catalog NumberH30 ZM3H030CPH60 ZM3H060CPH120 ZM3H120CPH240 ZM3H240CPP-Series Model NumbersFor All Models CDIPM0180CLX Series Model Numbers4 cell pair module – non-hot water sanitizable IP-LXM04X-310 cell pair module – non-hot water sanitizable IP-LXM10X-318 cell pair module – non-hot water sanitizable IP-LXM18X-324 cell pair module – non-hot water sanitizable IP-LXM24X-330 cell pair module – non-hot water sanitizable IP-LXM30X-34 cell pair module – instant hot water sanitizable IP-LXM4HI-310 cell pair module – instant hot water sanitizable IP-LXM10HI-318 cell pair module – instant hot water sanitizable IP-LXM18HI-324 cell pair module – instant hot water sanitizable IP-LXM24HI-330 cell pair module – instant hot water sanitizable IP-LXM30HI-324 cell pair module – E-Cell® replacement IP-LXM24MK-130 cell pair module – E-Cell® replacement IP-LXM30MK-1

P-180 Upgrade Kit IP-LXMP180

VNX Series Model NumberVNX-X3 IP-VNX-X3VNX50 IP-VNX50

NOTE: 1) The Compact Series replacement modules are also available; Contact Siemens for additional details.2) Please locate the module serial number located on the anode junction box for correct replacement.

84 CONTROL PANELS

H2O Control



The H2O Control panel family is a product offering of control panels that include

pump starter panels (single phase up to 2 HP and three phase up to 10 HP) as well

as alarm* and remote alarm* panels. Continuously on lamps are robust LED’s, alarm

lamps are bright visible incandescent bulbs. All panels are UL and cUL Listed. Panels

not specifically listed as part of the product line are also available as custom panels.

• All panels offered as NEMA 4/12, NEMA 4X Composite, NEMA 4X Stainless steel

• Single phase pump starter panels offered as 120 or 220 VAC with options forSimplex, Duplex, and Duplex with alternating timer

• Three phase pump starter panels offered as 208, 230, 460, or 575 VAC with optionsfor Simplex, Duplex, Duplex with alternating timer, auxiliary interclock, alarm

• All wires and screw terminals labeled for easy identification

• Panel drawing provided with each panel

* Alarm and Remote Alarm panels have not been approved for use in dialysis applications.


1-Phase Pump Starter

3-Phase Pump Starter

Alarm*

Remote Alarm*

85




DEAERATORS

Permutit® SLH Deaerating HeatersFlow Rates from 18 to 300 gpm

SYSTEM SPECIFICATIONSModel Number SLH-9 SLH-18 SLH-30 SLH-50 SLH-70 SLH-90 SLH-110 SLH-150

Outlet Capacitylb./hour . . . . . . . . . . . . . . . . . . . . . . . . 9,000 18,000 30,000 50,000 70,000 90,000 110,000 150,000gpm. . . . . . . . . . . . . . . . . . . . . . . . . . . 18 36 60 100 140 180 220 300

Storagelb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1,500 3,000 5,000 8,333 11,667 15,000 18,333 25,000gallons . . . . . . . . . . . . . . . . . . . . . . . . 180 360 600 1,000 1,400 1,800 2,200 3,000

System DimensionsHxDxW

feet . . . . . . . . . . . . . . . . . . . . . . . . . 7x8x10 7x8x13 7x8x17 8x9x18 9x10x17 9x10x20 9x10x28 9x10x27m . . . . . . . . . . . . . . . . . . . . . . . . . . . 17x20x25 17x20x33 17x20x43 20x23x46 23x25x43 23x25x50 23x25x71 23x25x68

Shipping Weightlb.. . . . . . . . . . . . . . . . . . . . . . . . . . . 1,920 2,360 3,010 4,200 5,160 5,860 6,900 8,000kg. . . . . . . . . . . . . . . . . . . . . . . . . . . 871 1,070 1,365 1,905 2,340 2,658 3,130 3,628

Vessels are designed per the ASME Code. Minimum shell and head-plate thickness 1/4". Units with <50,000 lb. capacity are 50 psi ASME Code design pressure. Units with >50,000 lb. capacity are 30 psi ASME Code design pressure.

Permutit® SLH Deaerating Heaters remove oxygen, free carbon dioxide and other

non-condensable gases from make-up water used for boiler feed, as well as from

return condensate. This product combines simplicity and compactness with high

performance and operational efficiency. SLH horizontal deaerating heaters are ideal

for low-pressure boiler plants.

• Compact construction keeps headroom and space requirements to a minimum

• Violent scrubbing action assures complete heating and deaeration

• Maximum efficiency is achieved by preheating water to near steam temperature

• Unique stainless steel internal direct contact vent condenser makes the required

vent rate so low it almost eliminates steam loss

• Simple, inexpensive installation

• Furnished with internal vent condenser and spray valves, inlet control valve,

overflow control, thermometer, sentinel relief valve, pressure gauge, gauge

glasses and structural support


For Permutit® products and information, contact 908-704-9027.

86



DEGASIFIERS

DG Series Forced Draft DecarbonatorsFlow Rates from 15 to 400 gpm

DG Series Forced Draft Decarbonators are designed to remove dissolved gases fromprocess water without changing its ambient temperature. The DG Series reducesthe load on deionization equipment and can extend the usable life ofneutralization chemicals and eliminates gas-related problems from the processstream. The DG Series may also be used to oxidize dissolved iron and manganesefor removal by filtration or clarification.

• Large clearwell (storage tank) eliminates the need for additional storage facilities

• Polypropylene hollow sphere packing provides a high active surface area for aircontact with water for rapid and efficient gas removal

• Easy to maintain with removable top for access inside and a packing section

clean-out

• Fiberglass tower with a flat sealed bottom and top air inlet distributor evenlydistribute incoming water over the surface of the packing

• Skid mounted stainless steel transfer pumps are available

• Optional HEPA filters remove airborne particles as small as 0.5 micron


Model

Number Catalog Number Catalog Number Description

DG-12 67/S2201-120 24/S2201-710 HEPA Filter Kit, 120, 180, 240DG-18 67/S2201-180 24/S2201-710 HEPA Filter Kit, 120, 180, 240DG-24 67/S2201-240 24/S2201-710 HEPA Filter Kit, 120, 180, 240DG-30 67/S2201-300 24/S2201-720 HEPA Filter Kit, 300DG-36 67/S2201-360 24/S2201-730 HEPA Filter Kit, 360DG-42 67/S2201-420 24/S2201-740 HEPA Filter Kit, 420DG-48 67/S2201-480 24/S2201-750 HEPA Filter Kit, 480DG-54 67/S2201-540 24/S2201-760 HEPA Filter Kit, 540DG-60 67/S2201-600 24/S2201-770 HEPA Filter Kit, 600

Optional HEPA Filter KitDecarbonators

SYSTEM SPECIFICATIONSModel Number DG-12 DG-18 DG-24 DG-30 DG-36 DG-42 DG-48 DG-54 DG-60

Flow rate . . . . . . . . . . . . . . . . . . . . . . . . . 15 gpm 35 gpm 60 gpm 100 gpm 150 gpm 200 gpm 250 gpm 300 gpm 400 gpmAir at 1' WC (Water Column). . . . . . . . . . 350 cfm 350 cfm 350 cfm 490 cfm 775 cfm 1100 cfm 1375 cfm 1575 cfm 2100 cfmClearwell Capacity. . . . . . . . . . . . . . . . . . 190 gal 259 gal 339 gal 549 gal 677 gal 976 gal 1189 gal 1735 gal 2115 galPacking Volume (cubic ft.). . . . . . . . . . . . 6 15 25 40 55 80 105 130 165

System DimensionsTower Diameter . . . . . . . . . . . . . . . . . . . . 12" 18" 24" 30" 36" 42" 48" 54" 60"Clearwell Diameter . . . . . . . . . . . . . . . . . 3' 3.5' 4' 4.5' 5' 6' 6' 8' 8'Height . . . . . . . . . . . . . . . . . . . . . . . . . . . 13' 14'-6" 15' 16' 16' 16' 17' 16' 17'Operating Weight

lb. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2,100 2,700 3,400 5,300 6,200 8,900 10,900 15,900 19,400kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . 953 1,225 1,542 2,404 2,812 4,037 4,944 7,212 8,800

Electrical Requirements . . . . . . . . . . . . . . . 480V/3 phase/60 Hz . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


87




DEIONIZERS

Deionization Recirculating Systems (DIRS)Flow Rates from 5 to 50 gpm

Economical, pre-packaged water purification systems producing high purity water.Depending on water quality requirements, systems are designed to permit several differentfield configurations to accommodate specific requirements. For ease and flexibility ofoperation, the systems are controlled by a PLC integral to the skid. Systems with higherflow rates and/or alternate plumbing options are available with little or no impact todelivery times.• Small skid mounted footprint to conserve valuable floor space

• Schedule 80 PVC piping with optional pigmented polypropylene (PP) for post-treatmentpiping

• Powder-coated steel frames for maximum support of DIRS system while allowing easyaccess for maintenance and operation

• Fully assembled system that is wired and hydrostatically tested prior to shipment

• Complete documentation package including installation, start-up and operationprocedures, P&ID, Electrical Schematics and Quality Assurance data reports

• PLC controls allow for multiple field configurations without altering the control systemhardware

• Fast delivery with pre-manufactured systems

• Quick installation and startup with typically less than one day need for system operation

• Minor field changes permit installation in one of the three configurations shown below

• UL and Seismic Zone 4 compliance to meet regional permitting regulations

Configuration #1

Configuration #2

Configuration #3


88



DEIONIZERS

VP Series Two Bed DeionizersFlow Rates from 10 to 220 gpm

VP Series Two Bed Deionizers are designed and manufactured for industrialapplications. They are rugged, pre-engineered, pre-assembled, standardized unitsthat minimize expensive installation and start-up costs. VP Series Two Bed Deionizersconsist of an acid regenerated cation vessel piped in series with a causticregenerated anion vessel. These pre-engineered units provide high-quality waterover the length of the service cycle. Operating conditions and an influent wateranalysis are required for predicting effluent quality and total volume of water treatedbefore regeneration is required. To reduce field fit-up problems with interconnectingpiping, the VP Series Two Beds must be ordered with the skid-mounted option.• Simple design maximizes reliability, efficiency and repeatability• 100 psig vessel ratings offer added strength and integrity• Baked PVC lining and paint extend vessel life• PLC controls ensure extremely reliable operation• Inlet flow meter assures consistent performance • Conductivity monitor assures consistent water quality • Schedule 80 PVC piping ensures long life and does not degrade water quality

SYSTEM SPECIFICATIONSDiameter 016 020 024 030 036 042 048 054 060 066 072

Service Flow Rate (gpm) . 10 17 24 38 54 74 97 123 153 182 220Minimum Flow Rate (gpm) 3 4 6 10 14 19 23 31 39 47 55Media (cubic feet)

Cation Resin Volume (ft3) 4 6 10 15 21 28 36 46 57 69 82Capacity (kgr) . . . . . . . . 80 120 200 300 420 560 720 920 1,140 1,380 1,640

AnionResin Volume (ft3) . . . 4.5 7 11 17 24 33 42 54 67 81 96

Capacity (kgr) . . . . . . . . 77 120 190 290 410 560 715 920 1,140 1,380 1,640Pipe Size . . . . . . . . . . . . . . 1” 1” 1” 1-1/4” 1-1/2” 2” 2” 2-1/2” 3” 3” 4”System DimensionsH x L x W . . . . . . . . . .inch 96x56x43 97x64x48 99x72x50 108x84x59 114x96x62 118x108x65 120x120x78 125x132x82 127x144x84 132x156x92 136x168x100

. . . . . . . . . . . . . .cm 244x142x117 246x162x122 251x183x127 274x213x150 289x244x157 300x274x165 305x305x198 317x335x208 322x366x213 335x396x234 345x427x254Shipping Weight

lb (kg) . . . . . . . . . . . . . . . 1800 (817) 2900 (1316) 3800 (1724) 4400 (1996) 6000 (2722) 7860 (3566) 9670 (4387) 11880 (5389) 14880 (6750) 20040 (9090) 25200 (11431)

Electrical Requirements . 120 V/60 Hz/single phase/15 amps. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ORDERING INFORMATION

Catalog Number: VPT S XXX X X B P D

System..................................... VPT 016 - 16"x72" 048 - 48"x72"Configuration............................................... S=Simplex* 020 - 20"x72" 054 - 54"x72"

024 - 24"x72" 060 - 60"x72"030 - 30"x72" 066 - 66"x72" A=100 psig 036 - 36"x72" 072 - 72"x72" ASME code Y=Skid, seismic

Vessel Size ............................................................................... 042 - 42"x72" X=100 psig zone 2AVessel Rating .............................................................................................................................................. non-code Z=Skid, seismicVessel Support ......................................................................................................................................................................... zone 4 B=PVC liningLining and Paint......................................................................................................................................................................................................... and paint P=Solid-Controls ................................................................................................................................................................................................................................................. State PLCControl Rating ............................................................................................................................................................................................................................................................... D=NEMA 4/UL*Duplex units should be ordered as two (2) simplex units.To determine your order number, replace the X with one of the numbered options below it.


89




DEIONIZERS

VP Series Mixed Bed DeionizersModel VPMFlow Rates from 16 to 330 gpm

VP Series Mixed Bed Deionizers are designed and manufactured for industrial applications. They are rugged, pre-engineered, pre-assembled, standardized units that minimize expensiveinstallation and start-up costs. Their simple design maximizes the efficiency and repeatabilityof the unit during the service and regeneration modes in order to provide a truly reliablewater treatment unit. VP Series Mixed Bed Deionizers consist of a single vessel that containsboth cation and anion ion exchange resins. The cation resin is a strong acid type. The anionresin is a strong base, Type II. These pre-engineered units provide high-quality water over thelength of the service cycle. Operating conditions and an influent water analysis are requiredfor predicting the effluent quality and total volume of water treated before regeneration isrequired.• Simple design maximizes reliability, efficiency and repeatability• 100 psig vessel ratings offer added strength and integrity• Baked PVC lining and paint extend vessel life• PLC controls ensure extremely reliable operation• Inlet flow meter assures consistent performance• Resistivity monitor assures consistent water quality • Schedule 80 PVC piping ensures long life and does not degrade water quality

SYSTEM SPECIFICATIONSDiameter 016 020 024 030 036 042 048 054 060 066 072

Service Flow Rate (gpm) . . . . . 16 25 36 56 82 112 145 185 229 272 330Minimum Flow Rate (gpm) . . . . 3 4 6 10 14 19 23 31 39 47 55Media (cubic feet)Cation Resin Volume (ft3) . . . . 1.5 2 3 6 9 12 16 21 25 31 37

Capacity (kgr) . . . . . . . . . . . . 30 40 60 120 180 240 320 420 500 620 740Anion Resin Volume (ft3) . . . . . 2.5 4 6 13 18 25 32 41 51 62 73

Capacity (kgr) . . . . . . . . . . . . 25 40 60 130 180 250 320 410 510 620 730Pipe Size . . . . . . . . . . . . . . . . . . 1" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3" 4" 4" 4"System DimensionsH x L x W . . . . . . . . . . . . . .inch 89x48x52 89x51x55 117x54x56 132x57x60 141x63x66 145x70x70 200x78x75 159x90x78 159x96x84 166x106x93 174x117x112 . . . . . . . . . . . . . . . . . . . . . . .cm 226x122x132 226x129x140 297x137x142 335x145x152 358x160x173 368x178x178 508x198x191 404x229x198 404x244x213 422x269x236 442x297x259 Shipping Weightlb (kg) . . . . . . . . . . . . . . . . . . . . 1080 (490) 1750 (794) 2280 (1034) 3000 (1361) 3700 (1678) 4530 (2055) 5330 (2418) 6170 (2799) 7570 (3434) 10080 (4572) 12470 (5657)

Electrical Requirements . . . . 120V/60 Hz/single phase/15 amps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


Catalog Number: VPM S XXX X X B P D System . . . . . . . . . . . . . . . . VPM 016 - 16"x72" 048 - 48"x96"Configuration. . . . . . . . . . . . . . . . . . . . . . . . S=Simplex* 020 - 20"x72" 054 - 54"x96"

024 - 24"x72" 060 - 60"x96" X=Legs, seismic030 - 30"x96" 066 - 66"x96" A=100 psig zone 4036 - 36"x96" 072 - 72"x96" ASME code Y=Skid, seismic

Vessel Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 042 - 42"x96" X=100 psig zone 2AVessel Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . non-code Z=Skid, seismicVessel Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . zone 4 B= BakedLining and Paint . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PVC P=Solid-Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . State PLC D=NEMA 4Control Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . and UL Label*Duplex units should be ordered as two (2) simplex units.To determine your order number, replace the X with one of the numbered options below it.


90



DEIONIZERS

VP Series Deionizer AccessoriesModel VPZ

VP Series Deionizer accessories provide additional flexibility for mixed bed and two

bed deionizers. These accessories are pre-engineered, pre-assembled catalog units

that are shipped loose for field installation on the deionizer.

Low Flow Recirculation (LFR):The low flow recirculation accessory ensures high water quality from the deionizer when operating at flow rates below the minimum specifiedrate. The recirculation pump automatically runs when the service flow rate drops below the minimum specified rate. The recirculation pump is a316 stainless steel, close-coupled, centrifugal pump with a 115 volt, TEFC motor. Also included is a local control enclosure that is wired directly tothe main control enclosure on the deionizer.

Diameter 016 020 024 030 036 042 048 054 060 066 072

Recirculation Flow Rate (gpm) 3 4 6 10 14 19 23 31 39 47 55Horse Power . . . . . . . . . . . 0.5 0.5 0.5 0.5 0.5 0.75 0.75 0.75 1.0 1.0 1.0Size Code . . . . . . . . . . . . . . 016 020 024 030 036 042 048 054 060 066 072

Effluent Resin Trap (TRP):The effluent resin trap accessory prevents the loss of ion exchange resin from the deionizer vessel in the unlikely event of underdrain failure. Theeffluent resin trap consists of a clear section of PVC pipe with a PVC slotted strainer. The effluent resin trap is installed in the service effluent pipingof the anion or mixed bed vessel.

Diameter 016 020 024 030 036 042 048 054 060 066 072

Mixed Bed Pipe Size . . . . . 1" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3" 4" 4" 4"Mixed Bed Size Code . . . . 100 100 125 150 200 250 300 300 400 400 400Two Bed Pipe Size . . . . . . . 1" 1" 1" 1-1/4" 1-1/2" 2" 2" 2-1/2" 3" 3" 4"Two Bed Size Code . . . . . 100 100 100 125 150 200 200 250 300 300 400

Pressure Reducing Regulator (PRV):The pressure reducing regulator accessory ensures consistent and reliable operation of the deionizer when the feedwater undergoes fluctuationsin pressure. This self-contained regulator is installed on the feedwater inlet of the deionizer.

Diameter 016 020 024 030 036 042 048 054 060 066 072

Mixed Bed Pipe Size . . . . . 1" 1" 1-1/4" 1-1/2" 2" 2-1/2" 3" 3" 4" 4" 4"Regulator Size . . . . . . . . . . 3/4" 3/4" 1" 1-1/4" 1-1/4" 2" 2" 2" 2-1/2" 2-1/2" 3"Mixed Bed Size Code . . . . 075S 075D 100D 125S 125D 200S 200D 200D 250S 250D 300STwo Bed Pipe Size . . . . . . . 1" 1" 1" 1-1/4" 1-1/2" 2" 2" 2-1/2" 3" 3" 4"Regulator Size . . . . . . . . . . 3/4" 3/4" 1" 1-1/4" 1-1/4" 2" 2" 2" 2-1/2" 2-1/2" 3"Two Bed Size Code . . . . . 075S 075D 100D 125S 125D 200S 200D 200D 250S 250D 300S

ORDERING INFORMATION Order as separate items

Catalog Number: VP Z XXX XXXReserved . . . . . . . . . . . . . . . . . . . . . . . . . . Accessory

Size Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . See tables for . . . . . . . . . . . . size code

. . . . . . . . . . . . . . . . LFR-Low flow recirculation pump

. . . . . . . . . . . . . . . . TRP-Resin trap

Accessory Code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PRV-Pressure reducing regulator


91




DIALYSIS (HEMODIALYSIS)

Hemodialysis Bicarbonate Mixing andDispensing System

This Siemens Water Technologies system provides consistent bicarbonate mixing and

dispensing. This semi-automatic system reduces the technician’s time and efforts by

automating all operations, especially cleaning. It delivers solution directly to the

distribution loop.

Features that make the difference include:

• Plastic components provide superior corrosion resistance

• Simple, yet rugged construction ensures high reliability

• Pre-assembled, skid-mounted systems reduce installation time and cost

• Programmable Logic Control system meets exacting automatic operational

requirements

• 50 and 100 gallon tank models are available

*Does not include operating space requirements. For easy and safe operation, there shouldbe a minimum of 2ft on each side and 4ft in front of the system.

ORDERING INFORMATIONCatalog Item Part Number

50 GAL TANK. . . . . . . . . . . . BICARB50SYS

100 GAL TANK. . . . . . . . . . . BICARB100SYS

Optional Components Part NumberPressure Control Valve for Distribution Outlet. . . . . . . . . 05/ZIVC00141

Model Number BICARB50 BICARB100

Tank Capacity 50 GAL 100 GAL

Feed 2 GPM@ 30psi

Loop Distribution 4 GPM@ 40psi

Loop Return 4 GPM

Skid Process Connection Specifications

Feedwater Inlet 1/2" NPT

Loop Distribution 3/4" NPT

Loop Return 3/4" NPT

Drain 1" Socket

Utility Requirements

Electrical Service 115 VAC, 1 Phase, 60Hz, 15A

Feedwater RO or DI water produced to AAMI standards for Hemodialysis

Waste Drain (min) 1"

Physical Dimensions Specifications*

Length 70" 83"

Depth 27" 35"

Height 60" 60"

Shipping Weight 300 lbs 350 lbs

Operating Weight 1800 lbs 2500 lbs


92




Med-RO® Reverse Osmosis MedicalSystems RX SeriesFor Dialysis Applications Requiring From 1.5 to 15 gpm

Med-RO® Reverse Osmosis medical systems are specifically designed for hemodialysis water

treatment applications. Our Med-RO® RX Series offers you the greatest flexibility possible

from a standard system. The control system is an easy-to-use advanced microprocessor

based system. The Med-RO® RX series product flow ranges from 1.4 to 15 gpm.

Features that make the difference include:

• Manufactured for hemodialysis water treatment applications, FDA registration

• Easier to clean – “full fit” thin film composite RO membranes mean less bacterial

contamination and less biofilm buildup

• Easy-to-use programmable controls for convenience

• Small footprint requires minimal space

• Reject recycle maximizes water recovery and minimizes waste

• Clean-in-place connections minimize disinfection downtime and overall cleaning time

• Systems manufactured at a QSR/ISO 9001 compliant registered facility

• Used with Siemens registered medical pretreatment components

• Registered with Health Canada as a medical device

General SpecificationsRO Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stainless steelConductivity Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Epoxy coated 3/4” MNPTFlow Indicator (Product) . . . . . . . . . . . . . . . . . . . . . . . . . . . Rotameter, PVC/acrylic construction, 3/4” FPT connectionsFlow Indicator (Reject) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Rotameter, PVC/acrylic construction, 3/4” FPT connectionsFlow Indicator (Recycle) . . . . . . . . . . . . . . . . . . . . . . . . . . . Rotameter, PVC/acrylic construction, 3/4” FPT connectionsControl System . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Microprocessor, NEMA 4X enclosure

93





SYSTEM SPECIFICATIONSModel Number RX01 RX02 RX03 RX04 RX05 RX06 RX08 RX09 RX12Product Flow* (gpm) . . . . . . 1.4 2.8 4.0 5.2 6.2 7.0 10.0 12.0 15.0Feed Flow (gpm) . . . . . . . . . 2.8 5.6 8.0 6.9 8.3 9.3 13.3 16.0 20.0Reject Flow (gpm) . . . . . . . . 1.4 2.8 4.0 1.7 2.1 2.3 3.3 4.0 5.0Reject Recycle (gpm). . . . . . 7.0 5.0 4.0 6.0 6.0 6.0 8.0 11.0 10.0

ConnectionFeed Inlet . . . . . . . . . . . . . . . 1-1⁄2” flange 1-1⁄2” flange 1-1/2” flange 1-1/2”” flange 1-1/2” flange 1-1/2” flange 1-1/2” flange 1-1/2” flange 1-1/2” flangeProduct Outlet . . . . . . . . . . . 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPTReject to Drain Outlet . . . . . 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPTWaste Drain–max gpm. . . . . 2.8 5.6 8.0 6.9 8.3 9.3 13.3 16.0 20.0Floor Drain . . . . . . . . . . . . . . A floor drain (in addition to a waste drain) should be supplied for general maintenance

MembranesMembrane/Vessel . . . . . . . . 1 1 1 1 1 1 1 1 1Membrane Quantity . . . . . . . 1 2 3 4 5 6 8 9 12Membrane Type . . . . . . . . . . RO-4040-FF RO-4040-FF RO-4040-FF RO-4040-FF RO-4040-FF RO-4040-FF RO-4040-FF RO-4040-FF RO-4040-FFRO VesselsVessel Array . . . . . . . . . . . . . 1 1:1 1:1:1 1:1:1:1 1:1:1:1:1 1:1:1:1:1:1 2:2:1:1:1:1 3:2:2:1:1 3:3:2:2:1:1Electrical Motor (hp). . . . . . . 5 5 5 5 5 5 10 10 10System Dimensions**H x W x D

inches . . . . . . . . . . . . . . 76x34x42 76x34x42 76x34x42 76x34x42 76x34x42 76x34x42 76x34x42 76x34x42 76x34x42cm. . . . . . . . . . . . . . . . . 193x86x107 193x86x107 193x86x107 193x86x107 193x86x107 193x86x107 193x86x107 193x86x107 193x86x107

Shipping Weight lb (kg) . . . . . . . . . . . . . . 475 (215) 500 (226) 540 (244) 550 (249) 590 (267) 630 (285) 750 (340) 800 (362) 825 (362)

*Product flow rates are based on equipment design parameters. These product flow rates may not be appropriate for other feed waters.**Does not include servicing space requirements.

Med-RO® MODEL

RX Vertical w/ controller, medical RO,

centrifugal pump

RO VESSEL QUANTITY DESIGNATION

01 1 VESSEL

02 2 VESSELS

03 3 VESSELS

04 4 VESSELS

05 5 VESSELS

06 6 VESSELS

08 8 VESSELS

09 9 VESSELS

12 12 VESSELS

RX OPTION DESIGNATIONS

AX 208VAC 3PH 60HZ

BX 230VAC 3PH 60HZ

CX 460VAC 3PH 60HZ

DX 380VAC 3PH 50HZ

EX 575VAC 3PH 60HZ

AX04RXMRO

Med-RO® Part Number Matrix / Single Pass Reverse Osmosis UnitsSTANDARD PRODUCT ORDERING INFORMATION


Liquid pressure gauges are designed to resist pulsation, shock, vibration, weather and

most corrosive atmospheres. They are ideally suited for a broad range of plant,

hydraulic and fluid power applications.

• Offered with a 2.5" dial face, stainless steel exterior, and liquid filled (glycerine)

with a 1/4" NPT stem mount

• Available with brass or stainless steel internals (gauges used on DI or softened

water must have stainless steel internals)

• Sanitary gauges are 316 stainless steel, glycerine filled and include a 1.5" tri-clamp

connection



PGBR03025 Brass internals; range 0-30 psi




PGSS03025 Stainless steel internals; range 0-30 psi






PG3A06035 3.5" face; sanitary; 0-60 psi






94



GAUGES

Pressure Gauges

GAUGES

Temperature Gauges

Siemens offers a simple, bimetal temperature gauge designed to measuretemperature in most non-sanitary applications. This gauge is constructedof 304 stainless steel, has a 3" dial face, a 4" long stem, with a 1/2"-14NPT stem mount.



TGNS20030 Non-sanitary; range 0-200°F

95




96



HIGH PURITY WATER SYSTEMS

PureFit™ High Purity Water Treatment SystemsFlow Rates makeup from 2-20 gpm, recirculating up to 72 gpm

The PureFit™ line of packaged systems is designed to address most common types ofapplications for high purity water with effluent resistivity of 16 megohm-cm orhigher.

PureFit™ systems include pretreatment, deionization, distribution and polishing, aspackaged systems and are offered in a variety of configurations. Each system iscompletely pre-assembled at the factory, with only a few subassemblies that must bereconnected in the field. The only additional items required are service DI (and forHPX, carbon) bottles, that are supplied by the Branch. Equipment can be shipped inwithin 7-8 weeks after receipt of order, and field assembly and startup can often beaccomplished in as little as 1-2 weeks.

HPW: systems with make-up flow rates up to8 gpm feature vertical RO pressure vesselswith one element per housing; systems withmake-up flow rates 12 gpm or higherfeature horizontal RO arrays with three ROelements per housing. An antiscalant feedsystem is available in lieu of softeners on allHPW systems. Equipment layout isextremely compact.

HPC: systems feature many of the samecomponents used in the HPW systems butalso include a softened water break tank andcontinuous electrodeionization instead ofmake-up service deionization. The CDIplatform also includes a UV sterilizer tominimize any biological buildup in therecirculating make-up stream during periodsof low DI water demand.

HPX: systems feature service deionizationinstead of RO as the primary means of TDSreduction. As the SDI units can handle awide range of flow rates a DI water storagetank is generally not required and thesystem footprint can be greatly reduced. Pre-filters and distribution components arecombined on one platform that sits adjacentto SDI and carbon bottles.

97




HIGH PURITY WATER SYSTEMS

PureFit™ High Purity Water Treatment SystemsFlow Rates makeup from 2-20 gpm, recirculating up to 72 gpm

Contact a Siemens representative for detailed specifications.In accordance with Siemens policy for continual product development and improvements, we reserve the

right to change the product information within this literature at any time, without notice.

• Powder-coated steel frames

• PLC based control system

• Full factory pre-assembly including piping, wiring, valves, hoses, cartridge filters,and other material items necessary for initial startup in the field

• PVC pretreatment, socket-fusion polyproylene (PP) downstream of the DI storagetank on HPW and HPC systems, PVC post-treatment on HPX systems

• Documentation: Operations & Maintenance Manual, System drawings includingProcess & Instrumentation Diagram and Electrical Schematics

• Fast delivery and installation with pre-manufactured systems


98



ION EXCHANGE RESINS AND FILTER MEDIA

USF™ Ion Exchange Resin

The selection, application and supply of ion exchange resins are critical to the

performance and cost effectiveness of your water treatment system. For over 80 years,

we have pioneered the development and application of a better ion exchange resin.

Siemens USF™ resin is produced by the leading manufacturers to meet our stringent,

performance based specifications. These standards are higher than those currently

used by the manufacturers in testing their own products. With the purchase of USF™

resin, you are assured of the highest quality product at a competitive price.

Advantages of Choosing USF™ resin:

• Superior quality – resins are tested to meet stringent performance specifications

• Strict QA/QC of our select manufacturers based on their ability to meet the

performance specifications consistently

• Competitive price with lower operating and life cycle costs

• Equal to or better performance for the dosage

• Process performance guarantees available

• Extensive technical and resin application support

• Annual resin analysis – No Charge

• Custom packaging to meet your volume needs

• Certificates of Analysis, Certificates of Conformance and shelf life statements are

available

• QA/QC meets ANSI/ASME NQA-1, 10CFR50 (Appendix B), and 10CFR21

compliance to Nuclear Safety requirements

See page 99 for catalog information.

See page 219 for turnkey ion exchange resin services.

99





USF™ Ion Exchange Resin and Media

ORDERING INFORMATIONPlease contact Technical Support at, 800.875.7873 ext 5000 for more information.

Ion Exchange Resins

PRODUCT NAME CATALOG # DESCRIPTION

Strong Acid Cation

USF C-211 (NA) 109104110 8% cross-linked, standard sodium form

USF C-211 (H) 109104111 8% cross-linked, standard hydrogen form

USF C-361 (NA) 109000902 10% cross-linked, more durable cation, sodium form

USF C-361 (H) 109000010 10% cross-linked, more durable cation, hydrogen form

USF C-381 (NA) 109001162 20% cross-linked, macroporous cation, sodium form

USF C-381 (H) 109000050 20% cross-linked, macroporous cation, hydrogen form

Weak Acid Cation

USF C-271 (H) 109004281 Acrylic weak acid cation macroporous, hydrogen form

Strong Base Anion

USF A-244 (CL) 109151000 Type II strong base, gel standard anion, chloride form

USF A-284 (CL) 109167502 Type I strong base, gel standard anion, chloride form

USF A-464 (CL) 109183201 Type I strong base, porous gel standard anion, chloride form

USF A-674 (CL) 109001160 Type I strong base, macroporous standard anion, chloride form

USF A-714 (CL) 109004968 Strong base acrylic gel anion, chloride form

Weak Base Anion

USF A-399 (FB) 109183401 High capacity styrenic macroporous weak base anion, free base form

USF A-444 (FB) 109000706 High capacity acrylic gel weak base anion, free base form

MEG Grade Resins

Cation

USF C-361 MEG (H) 3R010002910% cross-linked cation, hydrogen form, specially processed to meet tight semiconductor industry requirements

USF C-361 MEG PPQ (H) 3R0100028 Extremely low sodium processed upgrade of the C-361 MEG (H).

Anion

USF A-464 MEG (OH) 3R0100652Type I strong base, porous gel anion, hydroxide form, specially processed to meet tight semiconductor industry requirements

USF A-464 MEG PPQ (OH) 3R0100653 Extremely low sodium processed upgrade of the A-464 MEG (OH).

Mixed Bed

USF NR-30 MEG 3R0101082 1:1 chemical equivalent mix of C-361 MEG (H) and A-464 MEG (OH)

USF NR-30 MEG PPQ 3R0101086 1:1 chemical equivalent mix of C-361 MEG PPQ (H) and A-464 MEG PPQ (OH)

100




USF™ Ion Exchange Resin and Media

Filter Media and Activated Carbon

Quartz

USF No. 20 Quartz 110001500 Underlayment support bed and/or filter media: 0.4-0.5 mm



USF 1/4 x 1/8 Quartz 110001203 Underlayment support bed and/or filter media: 3.2-6.4 mm



Garnet

USF No. 8 Garnet 110400002 Filter media: 2.10-2.50 mm

USF No. 8-12 Garnet 110400000 Filter media: 1.41-2.00 mm

USF No. 30-40 Garnet 110400001 Filter media: 0.35-0.50 mm

Manganese Greensand

USF Greensand 110201001 Manganese greensand used for iron removal

Anthracite

USF Anthrafilt 110100997 Coarse filter media

Activated Carbon

USF ORC Carbon 110350006 12x40 mesh bituminous activated carbon

USF Acid Washed Carbon 110350008 Acid washed 12x40 mesh bituminous activated carbon

USF Coconut Shell Carbon 110350009 Coconut Shell 12x40 mesh activated carbon


101





USF™ Ion Exchange Resin and MediaCross Reference Guide


Siemens is the largest distributor of ion exchange resin. We are able to supply

you resin from all of the leading manufacturers, and are the largest stocking

distributor of Dowex brand resin.

UUSSFF™™ BBrraannddAmberlite Rohm &

HaasLewatit

LANXESSIonac® Sybron

Diaion®Mitsubishi

Dowex® Dow Purolite®

Weak Acid Cation

USF C-271 IRC-76 CNP-80MAC-3

(Marathon® MAC-3)C-106

USF C-281 IRC-86 CC WK-40 C-105

Strong Acid Cation

USF C-211IR-120

(Amberjet® 1200)(MonoPlus® S-100) C-249 SK-1B

HCR-S (Marathon® C)

C-100

USF C-361IR-122

(Amberjet® 1500)(MonoPlus® S-200) C-250 SK-110

HGR-W2 (Marathon® C-10)

C100X10

USF C-381 IR-200 (MonoPlus® SP-112) PK-228 (Marathon® MSC) C-150

Weak Base Anion

USF A-399 IRA-96 (MonoPlus® MP-64) WA-30 (Marathon® WBA-2) A-100

USF A-444 IRA-67 VP OC 1072 A-845

Strong Base Anion

USF A-244IRA-410

(Amberjet® 4600)(MonoPlus® M-600) ASB-2 SA-20A

SAR (Marathon® A2)

A-300

USF A-284IRA-400

(Amberjet® 4200)(MonoPlus® M-500) ASB-1 SA-10A

SBR-C (Monosphere® 550A)

A-600

USF A-464IRA-402

(Amberjet® 4400)ASB-1P SA-12A

SBR-P (Marathon® A)

A-400

USF A-674 IRA-900 (MonoPlus® MP-500) A-641 PA-312 (Marathon® MSA) A-500

A-714 IRA-458 VP OC 1071 A-850

Mixed Bed

USF TM-9 NRW-37

USF EDM

USF NR-6 IRN-150 SM 94 NM-60 (Marathon® MR-3)

USF NR-14 NM-73 NRW-37

USF NR-30 EX MB

( ) indicates Uniform Particle Size Equivalent

102



Resin Capacity (ft3) 0.45 1.2 3.5 12 30

Flow Rate (Min.–Max.) 0.5–1 1–3 2–10 10–35 25–75

Dimensions, Base/Height 8”dia./20.5” 8”dia./48” 14”dia./50” 29”sq./71.5” 36”sq./75.5”

ION EXCHANGE WASTEWATER SYSTEMS

Wastewater Ion Exchange Systems

ORDERING INFORMATIONFor more information, contact 800.525.0658.

Siemens Water Technologies designs and maintains systems to purify metal finishing

rinses, contaminated groundwater, printed circuit board rinses and many other metal

bearing streams. Siemens’ Wastewater Ion Exchange (WWIX) service utilizes ion

exchange resins and other media selected to remove specific ionic contaminants from

groundwater, industrial wastewater, and process water for recycle. DOT approved

vessels containing the selected resin or media treat your water until the capacity is

reached. Once exhausted, the WWIX vessels are removed and replaced with fresh, DOT-

compliant vessels and returned to service. Exhausted vessels are returned to our

processing facility where the contaminants are removed from the media/resin.

Your specific requirements are evaluated on an individual basis to determine the system configuration that best meets

your current and future needs. The system components are selected based upon your specific reuse or discharge

requirements. If your needs change, our wastewater treatment systems are flexible – we can simply change the media

types and/or tank size saving you significant capital expense.

Systems include resin/media options matched to your treatment needs:

• Granular Activated Carbon – Removes potential organic foulants as pretreatment to

the resins

• Strong Acid Cation Resin – Removes soluble cations (Ca, Ni, Zn, Mg, Cu, etc.)

• Strong Base Anion Resins – Removes soluble anions (SO4, Cl, CN, Cr6, etc.)

• Mixed Bed Resin – For polishing of low level dissolved ionic waters (e.g. rinse applications)

• Metals Specific Resins – For removal of specific metals (Cu, As, Zn, etc.)

• Lead Resins – For removal of Pb from wastewaters (sacrificial media)

Siemens national service network provides the local service needed to simplify the operation of your WWIX system. A

simple phone call is all that is required to get fresh canisters delivered to your site and the spent units picked up and

returned to our RCRA permitted plant for processing. All of our tanks are DOT approved for the transportation of

hazardous waste. See page 217 for more details on this service.

103




ION EXCHANGE WASTEWATER SYSTEMS

AquaSaver™ Chemical Feed and Pump Skids

SPECIFICATIONS

Flow Rate . . . . . . . . . . . . . . . . . . . . . . . . . 1 to 75 gpmpH Monitor . . . . . . . . . . . . . . . . . . . . . . . . Strantrol® 880PLC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Allen-Bradley®Chart Recorder . . . . . . . . . . . . . . . . . . . . . OptionalChemical Pumps . . . . . . . . . . . . . . . . . . . Siemens or LMI®Alarms Beacon and Audible Alarm for out of spec conditions

ORDERING INFORMATIONFor more information, contact 800.525.0658.

AquaSaver™ control skids are totally integrated, skid-mounted treatment

stations for pre ion-exchange water conditioning. The pH Contol Skid adjusts

the pH to the proper level before transfer to the ion exchange system, while

the Booster Skid supplies consistent process water flow and pressure,

optimizing the operation of downstream ion-exchange systems.


104



LABORATORY WATER SYSTEMS

PURELAB® UltraWater Purification System

PURELAB® ULTRA SYSTEM SPECIFICATIONS

Performance Specifications*

MODEL Resistivity Flow Rate (lpm) TOC (ppb) EndotoxinsEU/ml

BacteriaCFU10/ml

PURELAB Ultra Scientific

PURELAB Ultra Ionic

PURELAB Ultra Analytic

PURELAB Ultra Bioscience

PURELAB Ultra Genetic

18.2

18.2

18.2

18.2

18.2

up to 2.0

up to 2.0

up to 2.0

up to 2.0

up to 2.0

3-10

3-10

1-2

3-10

1-3

NA

NA

NA

<0.001

<0.001

<1**

<1

<1

<1

<1

MODEL HxWxD (in) Weight lbs


PURELAB Ultra Ionic




19x16x14

19x16x14

19x16x14

19x16x14

19x16x14

System Dimensions

Feed Water ParametersPurification Technology

MODEL DualPurificationCartridges

UV 254nm UV254/185nm

UF Ultrafilter

UMF UltraMicrofilter

PURELAB Ultra Scientific l

PURELAB Ultra Ionic l l l

PURELAB Ultra Analytic l l l l

PURELAB Ultra Bioscience l l

PURELAB Ultra Genetic l l l l

TOCMonitor

* Specifications based on RO pretreatment** < 1 CFU/ML w/0.2µm filter

Maximum Fouling Index <1*

Maximum Conductivity (RO Feed) 50 µS/cm

Minimum Resistivity (SDI Feed) 1 MΩ-cm

Maximum TOC 50 ppb

Maximum Free Chlorine <0.05 ppm

Maximum Carbon Dioxide 30 ppm

Maximum Silica 2 ppm

Particulates Down to 0.2 µm filtration

Temperature 1-40 °C

Feedwater Flow Rate Maximum requirement 130 lph

Maximum Pressure 10 psi

Minimum Pressure 1 psi or flooded suction to the recirculation pump

Power Requirements 100-240 VAC, 50-60 Hz (all models)

*A 0.2µm prefilter recommended for all non-RO feeds.

38

39

40

39

40

State-of-the-art intelligent water system delivers ASTM Type I ultrapure water for

critical biological and analytical applications. Designed to ensure the highest quality

water with the most advanced smart monitoring system.

Standard Features and Benefits

• 18.2 Megohm purity water up to 2.0 lpm

• Direct on-line real time TOC monitoring (Analytic and Genetic)

• Unique CID (cartridge identification) technology provides full traceability and

history of purification cartridge packs for validation

• 5 models to choose from

• Worker polisher purification design reduces annual costs by 50%

• Programmable dispense with auto alarm and shut off prevents flooding

• Volumetric Profile Memory dispense

• Friendly consumable change-out reminders

105





‘

PURELAB® UltraWater Purification System

Consumables and Accessories

Sanitization Tablets

UV Lamp 254nm (for Ionic)

UV Lamp 185nm/254nm

Ultra microfilter (0.05µm)

Ultrafilter (5,000 MWCO)

Point-of-Use Filter (0.2µm)

Labpure S1 DI Cartridge-RO Feed

Labpure S2 DI Cartridge-SDI Feed

Labpure S3 DI Cartridge-Low Ionic

Labpure S4 DI Cartridge-Low TOC

CT1

LC105

LC118

LC109

LC151

LC134

LC182

LC183

LC184

LC185

PURELAB® Ultra SystemsORDERING INFORMATION

Service and Maintenance packages availableDI (Deionization) Cartridges must be ordered separately

MODEL Catalog Number


PURELAB Ultra Ionic




PURELAB Ultra Analytic under-benchsystem (with remote control station anddispense gun)

PURELAB Ultra Genetic under-benchsystem (with remote control station anddispense gun)

ULXXXSCM2

ULXXXIOM2

ULXXXANM2

ULXXXBSM2

ULXXXGEM2

ULRSXANM2

ULRSXGEM2

Consumables Accessories

Pressure Regulator Valve Inlet

Wall Mounting Kit (PURELAB Ultra Unit)

RS232 Printer Kit

Installation Kit (PURELAB Ultra Unit) (supplied)

Remote Dispense Station (including dispense gun)

Integral Dispense Gun (PURELAB Ultra Unit)

Remote Control Station (PURELAB Ultra Unit)

Open Circuit Ring Main Kit

Closed Circuit Ring Main Kit

Pressure Regulator <60 psd

SDIRG2613*

LA622USA

LA618

LA642

LA643

LA644

LA645

LA646

LA647

LA652

Storage reservoirs are located on pages 34.* For feed pressure above 60 psig, use pressure regulator LA575.

Note: Installation kit supplied with all Ultra systems

Invitro Fertilization

2D Electrophoresis

Glassware washing

HPLC

Immunology

Tissue Culture

GC/MS

Toxicology

Buffer Preparation

Microbiology

DNA/RNA Research

Endotoxin analysis

TOC Analysis

MonoclonalAntibody production

Protein/Peptide Sequencing

Ion Chromatography

Flameless AA

PCR

ICP-MS

Protein purification

Mammalian Cell Culture

PURELAB UltraScientific

PURELAB UltraIonic

PURELAB UltraAnalytic

PURELAB UltraBioscienceApplications

Atomic Absorption

ICP-ES

PURELAB UltraGenetic

PURELAB® Systems Validation SupportSiemens Water Technologies offers validation documentation support packages for allPURELAB® Ultra water purification products. Validation support manuals includeInstallation Qualification (IQ), Operational Qualification (OQ) documentation and otherquality certification as required to complete validation of the water system. Our serviceengineers are fully trained to perform certification as required to complete thevalidation of water system.

ll

ll

l

ll

l

l

ll

ll

lll

ll

l

ll

l

l

106




‘

PURELAB® Classic Water Polishing Systems

Cost-efficient alternative for ASTM Type I purity water for general analytical and biological

applications. The PURELAB® Classic System offers reliability, and uncompromising

water quality.



• Easy front loading cartridges

• Complete sanitization of all wetted parts

• Unique CID Technology provide full traceability and history of purification

cartridge packs for validation

• Dual wavelength UV — 185 nm and 254 nm (PURELAB Classic UV Model)

• 5000 Dalton UF Module for pyrogen removal (PURELAB Classic UF Model)

• Wall or bench mountable

• Applications include HPLC, ICP, ICP/MS, GC, IC, AA, cell culture and molecular

biology

PURELAB® CLASSIC SYSTEMS

System Specifications

MODEL Resistivity Flow Rate†(lpm)

TOC* (ppb)

Endotoxins**EU/ml

Bacteria** CFU/ml

PURELAB Classic DI

PURELAB Classic UV

PURELAB Classic UF

PURELAB Classic UV/UF

18.2

18.2

18.2

18.2

1.5

1.5

1.5

1.2

<3-10

<1-3

<3-10

<1-3

NA

NA

<.001

<.001

<1

<1

<1

<1

MODEL HxWxD(in)

Weight(lbs)

Inlet Connections PowerRequirements

PURELAB Classic DI

PURELAB Classic UV

PURELAB Classic UF


19x16x14

19x16x14

19x16x14

19x16x14

32

33

32

33

8mm (5/16”) OD-Quick Connect




110–240 V 50/60 Hz

110–240 V 50/60 Hz

110–240 V 50/60 Hz

110–240 V 50/60 Hz

System Dimensions

MODEL OperatingTemperature

InletPressure

Free Chlorine(ppm)

PURELAB Classic DI

PURELAB Classic UV

PURELAB Classic UF


1–40˚ C

1–40˚ C

1–40˚ C

1–40˚ C

1–10 psig

1–10 psig

1–10 psig

1–10 psig

<0.05

<0.05

<0.05

<0.05

Feed Water Parameters

* Depends on feed water conditions. ** Based on regular sanitization and proper maintenance of the system.† Based on 1 bar feed pressure.

107




Accessories

Chlorine Sanitization Tablets

Labpure S5 DI Cartridge

UF Membrane

UV Lamp 185/254 nm

0.2 µm Final Filter

CT1

LC186

LC169

LC170

LC134

PURELAB® CLASSIC SYSTEMORDERING INFORMATION

Purification Cartridges must be ordered separately. UF cartridge and UV lamp supplied.


PURELAB Classic DI

PURELAB Classic UV

PURELAB Classic UF


CLXXXDIM2

CLXXXUVM2

CLXXXUFM2

CLXXUVFM2

Integral Dispense Gun

Remote Dispense Station

Printer Kit

Sanitization by-pass block

Pressure Regulator Valve (Feed Water Pressures

>4 bar (60 psi))

Pressure Regulator Valve (Feed Water Pressures

>0.7 bar (10 psi))

Pressure Regulator <60 psi

Wall Mount Kit

Remote Dispense Station with Dispense Gun

Open Ring Main Kit

Closed Ring Main Kit

Installation Kit

Composite Vent Filter

LA644

LA645

LA618

LA698

LA575

LA652

SDIRG261

LA622USA

LA643

LA646LA647LA642LC136M2


‘

PURELAB® Classic Water Polishing Systems

Consumables

108




‘

PURELAB® UHQ Systems

Lightweight, compact, portable ultrapure water system for the modern laboratory requiring up to

15 liters per day of 18.2 Megohm ASTM Type I water. The PURELAB® UHQ System delivers

ultrapure water from a tap feed or pretreated feed source for demanding laboratory applications.



• Recirculation feature maintains optimum water quality and inhibits bacterial growth

• Specially conditioned ion exchange resin ensures absolute ionic purity

• UV reactor cell reduces microorganisms and TOC levels

• 0.05 µm absolute filter protects microbore columns in analytical instruments

• Quality meter continually displays resistivity of water

• 4 liter storage tank capacity

• Supplied complete with all consumables

PURELAB® UHQ SYSTEM SPECIFICATIONS

Performance Specifications

MODEL TOC (ppb) Particles Output/per 8 hr daywhen fed w/RO water

BacteriaCFU/ml

PURELAB UHQ II w/RO

PURELAB UHQ PS w/out RO

<20

<20*

<0.05 µm

<0.05 µm

15 liters

25–40 liters

<1

<1

MODEL HxWxD (in) Shipping Weight (lbs) Inlet Connections Power Requirements

PURELAB UHQ II

PURELAB UHQ PS

16x9x16

16x9x16

22

22

3/4" NPT or 3/8" tube

3/4" NPT or 3/8" tube

110/115 V 60 Hz

110/115 V 60 Hz

System Dimensions

MODEL Operating Temperature Inlet PressureFeedwater quality

PURELAB UHQ II

PURELAB UHQ PS

4–35˚ C

4–35˚ C

Max 90 psi/Min 30 psi

Max 90 psi/Min 30 psi

Potable water free from turbidity & organics (max. freechlorine <0.1 ppm

Prepurified, <20 µS/cm and filtered to 0.2 µm or less

PURELAB® UHQ Feed Water Parameters

* When fed with reverse osmosis (RO) water

PURELAB® UHQ SYSTEMSORDERING INFORMATION


PURELAB UHQ II Type I water system w/RO

PURELAB UHQ PS Type I water system w/out RO

UHQ000IIXX11503

UHQ000PSXX11503


Purification Pack (2 organic absorption cartridges and 2 ion exchange cartridges)

Reverse Osmosis Cartridge

0.05 µm Ultra Microfilter

UV Lamp


UHQPACKA

UHQ5

LC109

LC104

UHQ4

HPLC

Atomic AbsorptionSpectroscopy

ICP/MS

Ion Chromatography

PURELABUHQ II

PURELABUHQ PSApplication

l l

l l

l l

l l

109





‘

MODULAB® High Flow Systems

MODULAB® HIGH FLOW SYSTEMS


MODEL # PRODUCT

MHF0ORG1

MHF0SMF2

MHD0SMF5

CARTRIDGES

MLHF20DI01

MLHF20CAR1

MLHF20OS01

FCUF020S2 (1/PK)

MLMF020S2 (2/PK)

FCUF020S05

CONSUMABLES

BULBUV185

MLHFTOC1KIT

MLHFB102

MLHFUF05

Modulab High Flow System Low TOC

Modulab High Flow System Bio Model

Modulab High flow System UF Model

Carbon Cartridge

Mixed Bed Cartridge

Organic Removal Cartridge

0.2 µm, Filter Cartridge

0.2 µm, Filter Cartridge

0.05 µm, Micro Ultrafilter Cartridge

UV Lamp

Start-up Kit (Low TOC)

Start-up Kit (Bio Model)

Start-up Kit (UF Model)

General SpecificationsOperating Parameters

MODULAB® System SpecificationsProduct Water Quality

Modular polishing system provides up to 18.2 Megohm quality water on demand.

The MODULAB® High Flow System is offered in three models: low TOC (Total

Organic Carbon), low bacteria, low pyrogen systems.

Features and Benefits

• High capacity, low TOC cartridges

• Flow rates up to 14 lpm

• Dual wavelength UV sterilization

• Wall mountable

• Up to 18.2 MΩ-cm water

Min. Flow Rate

Max Flow Rate

Resistivity

Total Organic Carbon (TOC)

Heavy Metals

Bacteria

Endotoxin

2 lpm (0.5 gpm)

Up to 14 lpm (3.7 gpm)

Up to 18.2 MΩ-cm @ 25˚C

<15 ppb*

<0.10 ppb

<10 cfu/ml**

<0.05 EU/ml**

* With organic Removal Cartridge installed and RO (reverse osmosis) feed water.** With Sub-micron or UF (ultrafiltration) Filter Cartridge installed as specified.Note: Specifications are based on a RO feed with recirculation.

Min Feed Pressure

Max Feed Pressure

Min Feed Temperature

Max Feed TemperaturePhysical Specifications

Length, in (cm)

Depth, in (cm)

Height, in (cm)

UV Bulb Service Clearance, in (cm)Utility Requirements

Electrical

Low voltage service, Single Phase

Breaker required per Code

Feed Water

0.5 psig

60 psig

41˚F (5˚C)

100˚F (37.7˚C)

43 (109)

8.5 (22)

39 (100)*

6 (16) Front

115 VAC

15 AMP

RO or DI water

* Requires an additional 4” in height to allow changing of cartridges

110




‘

PURELAB®

Option-S Water Purifiers

The PURELAB® Option-S System combines pretreatment, reverse osmosis, and ionic/organic

removal in a single unit to deliver better than single distilled quality water from a potable water

source. With 4 models to choose from, the PURELAB® Option-S System is ideally suited for

general laboratory analyses and as pretreatment to ultrapure water polishing units.


• Up to 10 Megohm purity water


• Cartridge change indicator

• Microprocessor controlled system management with continuous water quality

monitoring

• Data collection capabilities through RS232 interface

• Adjustable audio-visual alarms

• Upgradable to higher flow rates



PURELAB® OPTION-S SYSTEM SPECIFICATIONS


MODEL Resistivity MΩ-cmFlow Rate

LPH @ 25˚ CTOC (ppb)

Bacteria*CFU/ml pH

PURELAB Option-S 7/15


1–10

1–10

7 or 15

30 or 60

<30

<50

NA

<1

Neutral

Neutral

MODEL HxWxD (in) Weight (lbs) Power Requirements

18.2x16.2x8.3

18.2x16.2x8.3

29.2x22.5x12.6

29.2x22.5x12.6

110–240 V 50- 60 Hz

110–240 V 50- 60 Hz

110–120 V 60 Hz

110–120 V 60 Hz

System Dimensions

MODEL FeedWater

MaximumFI

Max.Conductivity

µS/cm

Max.Free Chlorine

(ppm)



Potable

Potable

10

10

1400

1400

<0.5

<0.5


* Based on regular sanitization and proper maintenance of the system

Max. Pressurew/out booster

pump (psi)Temperature

Max. Pressurew/boosterpump (psi)

1–35˚ C

1–35˚ C

90

N/A

30

N/A

GlasswareWashing/Rinsing

Reagent Preparation

Buffer Preparation

General Chemistry

Qualitative Analyses

Feed to EnvironmentalCabinets

PURELABOption-S 7/15

PURELABOption-S 30/60Application

29.8

32

114.6

116.8

PURELAB Option-S 7

PURELAB Option-S15

PURELAB Option-S 30

PURELAB Option-S 60

*Fouling Index

l

lllll

l

lllll

111





‘

PURELAB®

Option-S Water Purifiers


Pretreatment Cartridge

RO module (7.5 lph)

Purification Cartridge


Wall Mounting Bracket


Pressure Regulator Valve

Booster Pump Kit

Flow Upgrade Kit (7–15 lph)

RS232 Printer Kit

Remote Control Station

Installation Kit (supplied)

Remote Dispensing Valve

LC140

LC143

LC141

LC136M2

LA622USA

CT1

LA512

LA609

LA604

LA618

LA624 (7/15 units only)

LA513

LA521

Option-S 7/15 Option-S 30/60

5 µm Carbon Filter

RO Module (30 lph)

RO Module (60 lph)


UV Lamp


Cleaning Solution Elgalite RF

Flow Upgrade Kit 30–60 lph


LC123

LC115

LC119

LC114

LC105

LA593USA

SOLU30966

LA562

LA545

Storage Reservoirs - Required with system

25 Liter Reservoir

40 Liter Reservoir

75 Liter Reservoir

DV 35 Docking Vessel

DV 35 Liter Mounting Bracket

Wall Mounting Kit (25/40 Liter Reservoir)

Wall Mounting Kit (75 Liter Reservoir)

LA611

LA612

LA613

LA620

LA591USA

LA591USA

LA592USA

Option-S 7/15 Option-S 30/60

40 Liter Reservoir

75 Liter Reservoir



LA587

LA590

LA591USA

LA592USA

PURELAB® OPTION-S SYSTEMORDERING INFORMATION

*Reservoir is required with Option-S (sold separately - see below)All units come complete with installation kit and full set of cartridges


PURELAB Option-S 7

PURELAB Option-S 7 w/booster pump

PURELAB Option-S 15

PURELAB Option-S 15 w/booster pump

PURELAB Option-S 30

PURELAB Option-S 60

OS007XXM1

OS007BPM1 (for feed waters less than 60 psi)

OS015XXM1

OS015BPM1 (for feed waters less than 60 psi)

OPT030XXXX11503

OPT060XXXX11503

Note: Installation kit is supplied with DV Reservoirs

112




‘

PURELAB®

Option-R Water Purifiers The PURELAB® Option-R System features all the technologies of the S series units with the

added benefit of an integral recirculation feature to deliver better than double distilled

quality water from a potable water source. The PURELAB® Option-R System is ideally suited

for standard laboratory techniques and as pretreatment to ultrapure water polishing units

where TOC is a concern.


• 10 to 15 Megohm purity water




monitoring through unique GRID display (Option-R 7/15)






PURELAB® OPTION-R SYSTEM SPECIFICATIONS

Performance SpecificationsMODEL Resistivity

MΩ -cmFlow Rate

LPH @ 25˚ CTOC*(ppb)

Bacteria*CFU/ml

pH

PURELAB Option-R 7/15


10 to >15

1 to >15

7/15

30/ 60

<20

<50

<1

<1

Neutral

Neutral




18.2x16.2x8.3

29.2x22.5x12.6

R7–39.8 : R15–41.9

R30–116.8 : R60–119

110–240 V 50- 60 Hz

110–120 V 60 Hz

System Dimensions

MODEL Feedwater MaximumFI*

Max.Conductivity

µS/cm

Max. FreeChlorine

(ppm)



Potable

Potable

10

10

1400

1400

<0.5

<0.5



Pressure w/out booster pump (psi)

Temperature Pressure w/boosterpump (psi)

1–35˚ C

1–35˚ C

90 max/60 min.

NA

30 max/flooded suction

NA

Particulates

>0.2 µm

>0.2 µm


Cytology & HistologyPreparations

Immuno-Cytochemistry

Spectrophotometry

Electrophysiology

Electrochemistry

PURELABOption-R 7/15

PURELABOption-R 30/60Application

RIA/ELISA

General Purpose HPLC

Flame AA

* Fouling Index

l

l

lllllll

l

l

lllllll

113





‘

PURELAB®

Option-R Water Purifiers



RO module (7.5 lph)



Point-of-Use Filter (0.2µm)

UV Lamp




Booster Pump Kit

Flow Upgrade Kit (7 to 15 lph)

RS232 Printer Kit


Remote Dispensing Gun


LC140

LC143

LC141

LC136M2

LC145

LC105

LA622USA

CT1

LA512

LA609

LA604

LA618



LA513

Option-R 7/15 Option-R 30/60

5 µm Carbon Filter

RO Module (30 lph)

RO Module (60 lph)


Point-of-Use Filter

UV Lamp



Flow Upgrade Kit 30 to 60 lph


LC123

LC115

LC119

LC114

LC106

LC105

LA593USA

SOLU30966

LA561

LA545


25 Liter Reservoir

40 Liter Reservoir

75 Liter Reservoir

DV 25 Liter Docking Vessel





LA611

LA612

LA613

LA621

LA591USA

LC136M2

LA591USA

LA592USA

Option-R 7/15 Option-R 30/60

40 Liter Reservoir

75 Liter Reservoir




LA587

LA590

LC136M2

LA591USA

LA592USA

PURELAB® OPTION-R SYSTEMORDERING INFORMATION

*Reservoir is required with Option-R (sold separately)All units come complete with installation kit and full set of cartridges


PURELAB Option-R 7

PURELAB Option-R 7 w/booster pump

PURELAB Option-R 15

PURELAB Option-R 15 w/booster pump

PURELAB Option-R 30

PURELAB Option-R 60

OR007XXM1

OR007BPM1 (for feed waters less than 60 psi)

OR015XXM1

OR015BPM1 (for feed waters less than 60 psi)

OPT030PLXX11503

OPT060PLXX11503

114




‘

PURELAB®

Option-Q Water Purifiers

The PURELAB® Option-Q System produces ultra pure water with out the need for a pre-

purified feed supply. Available in two models depending on flow rate requirements, the

PURELAB® Option-Q System delivers up to 18 Megohm water on demand direct from tap

making it a cost effective choice for the laboratory.


• Up to 18.2 Megohm water from tap

• Cartridge change indicator to ensure optimal performance


• Adjustable audio-visual alarms for consumable change-outs

• RS232 interface for easily downloaded data collection

• Compact Design

• Comes complete with all consumables

PURELAB® OPTION-Q SYSTEM SPECIFICATIONS

Performance SpecificationsMODEL Resistivity

at 25˚CTOC(ppb)

Bacteria* CFU/ml withPOU Filter (optional)

pH

PURELAB Option-Q 7/15 Up to 18.2 MΩ-cm <10 <1 Effectively Neutral

MODEL HxWxD (in) Weight (lbs)

PURELAB Option-Q 7

PURELAB Option-Q 15

18.1x21.7x10.5

18.1x21.7x10.5

39.7

41.8

System Dimensions


Max.Conductivity

µS/cmMax. FreeChlorine

PURELAB Option-Q 7/15 Potable 10 1400 0.5



Pressure w/out booster pump (psi)

Temperature Pressure w/booster pump(psi)

1–35˚ C 90 max/60 min. 30 max/flooded suction min.

ParticulatesPOU Filter (optional)

>0.2 µm


Reagent Preparation

Buffer Preparation

General Chemistry

Qualitative Analyses


PURELABOption-Q 7/15

Application

* Fouling Index

l

llll

l

CarbonDioxide (ppm)

30

Flow RateLPH@25˚C

7/15

115





‘

PURELAB®

Option-Q Water Purifiers



Reverse Osmosis Cartridge Module

Ion Exchange Cartridge Pack

UV Lamp

Point of Use Filter



Pretreatment Filter

LC140

LC143

LC163

LC118

LC145

CT1

LC136M2

LC123

Consumables


25 Liter Reservoir

40 Liter Reservoir

75 Liter Reservoir






LA611

LA612

LA613

LA621

LA591USA

LC136M2

LA591USA

LA592USA

Option-Q 7/15

PURELAB® OPTION-Q SYSTEMORDERING INFORMATION

Reservoir is required with Option-Q unit (sold separately)All units come complete with installation kit and full set of cartridges


PURELAB Option-Q 7

PURELAB Option-Q 7 BP w/booster pump

PURELAB Option-Q 15

PURELAB Option-Q 15 BP w/booster pump

OQ007XXM1

OQ007BPM1

OQ015XXM1

OQ015BPM1


Installation Kit (with saddle valve)

Pressure Regulator Valve (inlet)

Booster Pump Kit

Wall Mounting Kit (PURELAB Option-Q)

Flow Upgrade Kit (7–15l/hr)

RS232 Printer Kit

Remote Dispense Valve


Remote Dispensing Gun

Prefilter if Boost Pump Fitted

LA513

LA506

LA512

LA609

LA622USA

LA605

LA618

LA521

LA675

LA629

LA582

Accessories

116




‘

PURELAB® Prima 7/15/20Reverse Osmosis Systems

PURELAB® Prima reverse osmosis water purification systems deliver Type III/IV primary

grade water from a tap feed. All models continuously monitor and display water quality

and operational parameters, ensuring a constant supply of pretreated quality water. Prima

systems are ideal as pretreatment to ultrapure water polishers or for routine glassware

washing.


• Advanced high flux TFC membranes




monitoring through unique GRID display






PURELAB® PRIMA 7/15/20 SYSTEM SPECIFICATIONS


MODEL Inorganics Flow Rate LPH @ 25˚ C

TOC(ppm)

Bacteria*CFU/ml

Organics

PURELAB Prima 7/15/20 Up to 98% rejection(90% min)

7 or 15 or 20<0.1 <5 >99% rejection


PURELAB Prima 7/15/20 18.2x16.2x8.3 Prima 7–25.4Prima 15–27.6Prima 20–28.7

110–240 V 50- 60 Hz

System Dimensions


Max.Conductivity

µS/cm

Max. FreeChlorine (ppm)

PURELAB Prima 7/15/20 Potable 10 1400 <0.5



Pressure w/out booster pump

(psi)Temperature

Pressurew/boosterpump (psi)

1–35˚ C 90 max/60 min 30 max/flooded suction

Particulates

>99% removal

Glassware Washing

Hydroponics

Pretreatment to Ultrapure water systems

PURELABPrima 7

Application PURELABPrima 20

PURELABPrima 15

lll

lll

lll

*Fouling Index

117





‘

PURELAB® Prima 7/15/20Reverse Osmosis Systems



RO Module (7.5 lph)






RS232 Printer Kit

Pressure Regulator

Raw Water Booster Pump Kit



LC140

LC143

LA622USA

CT1

LA614

LA615

LA616

LA618

LA512

LA609

LA628

LA513


25 Liter Reservoir

40 Liter Reservoir

75 Liter Reservoir

DV 35 Docking Vessel

DV 35 Mounting Bracket




LA611

LA612

LA613

LA620

LA591USA

LC136M2

LA591USA

LA592USA

PURELAB® PRIMA 7/15/20 SYSTEMSORDERING INFORMATION

All units include installation kit and full set of cartridges


PURELAB Prima 7

PURELAB Prima 7 w/booster pump

PURELAB Prima 15


PURELAB Prima 20


PR007XXM1

PR007BPM1 (for feed waters less than 60 psi)

PR015XXM1

PR015BPM1 (for feed waters less than 60 psi)

PR020XXM1

PR020BPM1(for feed waters less than 60 psi)

118




‘

PURELAB® Prima 30/60/90/120Reverse Osmosis SystemsDesigned to meet your higher water volume requirements, PURELAB® Prima reverse

osmosis water purification systems provide primary grade water from a tap feed at flow

rates up to 120 liters per hour. With a built-in integral booster pump, PURELAB® Prima

reverse osmosis systems are ideal as pretreatment to feeding autoclaves, dishwashers or

for use in environmental cabinets.


• Auto rinse capability


• Low energy consumption

• Microprocessor based management system

• Integral pretreatment

• Performance indicators



PURELAB® PRIMA 30/60/90/120SYSTEM SPECIFICATIONS


MODEL Inorganics Flow RateLPH @ 15˚ C TOC (ppm) Bacteria*

CFU/mlOrganics

PURELAB Prima 30/60/90/120

Up to 98% rejection(90% minimum)

30/60/90 or 120<0.1 <5 >99% rejection


PURELAB Prima30/60/90/120

29.2x22.5x12.6 Prima 30–101.4 Prima 60–103.6Prima 90–105.8Prima 120–119.0

110–120 V 60 Hz

System Dimensions

MODEL Source MaximumFI*

Max.Conductivity

µS/cmMax. Free

Chlorine (ppm)

PURELAB Prima 30/60/90/120 Potable 10 1400 <0.5


* Based on regular sanitization and proper maintenance of the system.

Temperature Inlet Pressure(psi)

1–35˚ C 90 max/20 minimum

Particulates

>99% removal

Glassware Washing

Feed to Autoclaves

PURELAB Prima 30

Application

Steam Generator Feed

Pretreatment to Polishers

PURELAB Prima 90

PURELAB Prima 60

PURELAB Prima 120


lllll

*Fouling Index

lllll

lllll

lllll

119





‘

PURELAB® Prima 30/60/90/120Reverse Osmosis Systems


5 µm Carbon Filter

RO Module (30 lph)

RO Module (60 lph)

RO Module (90 lph)






LC123

LC115

LC119

LC120

LA593USA

SOLU30966

LA558

LA559

LA560


40 Liter Reservoir

75 Liter Reservoir


Wall Mounting Kit (40 Liter reservoir)

Wall Mounting Kit (75 Liter reservoir)


LA587

LA590

LC136M2

LA591USA

LA592USA

LA545

PURELAB® PRIMA 30/60/90/120 SYSTEMSORDERING INFORMATION

All units include installation kit and full set of cartridges


PURELAB Prima 30

PURELAB Prima 60

PURELAB Prima 90

PURELAB Prima 120

PRI030XXXX11503

PRI060XXXX11503

PRI090XXXX11503

PRI120XXXX11503

120




‘

CENTRA® Packaged Central LaboratoryWater SystemsThe Centra® Lab Central Water System combines purification, storage and distribution in a

single cabinet. The compact system design incorporates, RO, UV, filters, pump and reservoir

in one unit. Purified water is distributed via a loop to multiple labs and points of use in a

building.


• Flow rates of 5 gpm and 10 gpm

• Consumable change reminders

• Feeds multiple floors, faucets, polishers, glassware washers, autoclaves and sterilizers

in a facility

• Water leak detection to prevent lab flooding

• Compact design for space utilization

• Easy connection to Building Management System (BMS)

• Validatable

CENTRA® SYSTEM SPECIFICATIONS


MODEL Inorganics TOC Bacteria* Particulates

CENTRA MDS

CENTRA LDS

CENTRA LDS-HF

CENTRA RDS

CENTRA RDS-HF

CENTRA S-200

CENTRA S-200-HF

CENTRA R-200

CENTRA R-200-HF

As per feed

As per feed

As per feed

From feed quality up to 18.2 MΩ-cm*

From feed quality up to 18.2 MΩ-cm*

RO Permeate

RO Permeate

Up to 18.2 MΩ-cm*

Up to 18.2 MΩ-cm*

As per feed

As per feed

As per feed

From feed quality to <10 ppb*

From feed quality to <10 ppb*

Typically <100 ppb***

Typically <100 ppb***

<10 ppb2

<10 ppb2

As per feed

As per feed

As per feed

<5 CFU/ml**

<5 CFU/ml**

<50 CFU/ml**

<50 CFU/ml**

<5 CFU/ml**

<5 CFU/ml**

As per feed

As per feed

n/a

0.2µm filter

0.2µm filter

0.2µm filter

<10 micron

0.2µm filter

<10 micron

MODEL HxWxD (in) Weight (lbs) Empty

CENTRA MDS

CENTRA LDS

CENTRA LDS-HF

CENTRA RDS

CENTRA RDS-HF

CENTRA S-200

CENTRA S-200-HF

CENTRA R-200

CENTRA R-200-HF

47x28.75x35

71.7x28.75x35

71.7x28.75x35

71.7x28.75x35

71.7x28.75x35

71.7x28.75x35

71.7x28.75x35

71.7x28.75x35

71.7x28.75x35

254

396

396

396

396

507

507

507

507


MODEL

CENTRA MDS

CENTRA LDS

CENTRA LDS-HF

CENTRA RDS

CENTRA RDS-HF

CENTRA S-200

CENTRA S-200-HF

CENTRA R-200

CENTRA R-200-HF


SourceMaximum

FI*Conductivity

µS/cm Max. Free Chlorine (ppm)

Potable

Potable

Potable

Potable

Potable

Potable

Potable

Potable

Potable

n/a

n/a

n/a

n/a

5

5

5

5

5

n/a

n/a

n/a

n/a

n/a

1000

1000

1000

1000

n/a

n/a

n/a

n/a

n/a

0.1 ppm

0.1ppm

0.1 ppm

0.1ppm

PressureTemperature

5–35˚ C (41-95˚ F)

5–35˚ C (41-95˚ F)

5–35˚ C (41-95˚ F)

5–35˚ C (41-95˚ F)

5–35˚ C (41-95˚ F)

5–35˚ C (41-95˚ F)

5–35˚ C (41-95˚ F)

5–35˚ C (41-95˚ F)

5–35˚ C (41-95˚ F)

145 psi max

145 psi max

145 psi max

145 psi max

145 psi max

58 psi max

58 psi max

58 psi max

58 psi max

Weight (lbs) working

352

1124

1124

1124

1124

1279

1279

1279

1279

Reservoir VolumeTypical Loop FlowRate****

Up to 18 L/min @ 3 Bar (45psi)


38L/min @ 3 Bar (45psi)







200 Liters (53 US gallons)









Electrical Requirements115V and 11F230V110V / 60Hz

110V / 60Hz

208-230V / 60Hz

110V / 60Hz

208-230V / 60Hz

110V / 60Hz

208-230V / 60Hz

110V / 60Hz

208-230V / 60Hz

*Subject to suitable deionization cylinder. **Subject to correct operating and maintenance procedures. ***Subject to feed water. ****Subject to distribution loop design.

121





‘

CENTRA® Packaged Central LaboratoryWater Systems


CENTRA® Lab Water System

Composite Vent Filter LC156

Bacteriological Filter (0.2 µm) LC157

UV Lamp LC158

Pretreatment Filter (10 µm) LC159

0.2 µm Filter 10” FCWNF1052

RO Module LC161

Dot Matrix Printer Kit LA666

CENTRA Remote Display LA665

High Recovery Reverse Osmosis Kit

(S200 R200) LA679

CENTRA® LAB WATER SYSTEMORDERING INFORMATION


CENTRA MDS

CENTRA LDS

CENTRA LDS High Flow

CENTRA RDS

CENTRA RDS High Flow

CENTRA S200

CENTRA S200 High Flow

CENTRA R200

CENTRA R200 High Flow

CNXXXMDM1115

CNXXXLDM1115

CNHFLDM1-230

CNXXXRDM1115

CNHFRRDM1-230

CN200SDM1115

CNHFRS201-230

CN200RDM1115

CNHFRR2M1-230

CENTRA® High Flow System

Composite Vent Filter LC156

UV Lamp LC158

Pretreatment Filter (10 µm) LC159

0.2 µm Filter 20” FCWNF2052

RO Module LC161

Dot Matrix Printer Kit LA666

CENTRA Remote Display LA665

Loop Booster Pump Module LA696

High Recovery Reverse Osmosis Kit

(S200 R200) LA679

Temperature Control Kit LA688

122




‘

MEDICA® 7/15 Water Systems (Models S/R/D)for Clinical Analyzers

l l

Compact system utilizing pretreatment, RO, deionization, UV photo oxidation and

in-line microfiltration technologies to produce CLSI (Clinical Laboratory Standards Institute) Type

I water to feed chemistry and immuno-diagnostic analyzers. Available in recirculating model

- MEDICA® R, degassing model - MEDICA® D or standard MEDICA® Systems.


• 1 to 15 Megohm purity water

• Flow rates from 7 lph to 15 lph



monitoring through unique LCD display

• Adjustable audio-visual alarms and cartridge change indicator

• RS232 port for water quality data collection for compliance with GLP

• Models available with a degassing feature (MEDICA® D 7/15)

• Recirculating models available to ensure consistent purity

• System includes all cartridges

MEDICA® S/R/D 7/15 SYSTEM SPECIFICATIONS


MODEL ResistivityMΩ-cm @ 25 C

Flow RateLPH @ 15˚ C

TOC (ppb) Bacteria*CFU/ml

pH Particulates

MEDICA S 7/15

MEDICA R 7/15

MEDICA D 7/15

1–15

1–15

1–15

7/15

7/15

7/15

<30

<30

<30

<1

<1

<1

Neutral

Neutral

Neutral

<0.2 µm

<0.2 µm

<0.2 µm


MEDICA S 7/15

MEDICA R 7/15

MEDICA D 7/15

18.2x21.6x10.6

18.2x21.6x10.6

18.2x21.6x10.6

MEDICA 7–40.8MEDICA 15–41.9



100–240 V 50-60 Hz

100–240 V 50-60 Hz

100–240 V 50-60 Hz

System Dimensions

MODEL

MEDICA S 7/15

MEDICA R 7/15

MEDICA D 7/15



SourceMaximum

FI*Conductivity


Potable

Potable

Potable

10

10

10

1400

1400

1400

<0.5

<0.5

<0.5

Pressure w/out booster pump (psi)Temperature Pressure w/booster

pump (psi)1–35˚ C

1–35˚ C

1–35˚ C

90 max/60 min.

90 max/60 min.

90 max/60 min.




Feed Water forClinical Analyzers

MEDICA7

Application MEDICA15

* Fouling Index

123





‘

MEDICA® Water Systems for Clinical Analyzers



RO Module (7.5 lph)


In-Line 0.2 µm Filter

UV Lamp




Booster Pump Kit


RS232 Printer Kit



MEDICA D Degas Membrane

LC140

LC143

LC141

LC125

LC105

LA622USA

CT1

LA512

LA609

LA606

LA618


LA513

MEMB37275

Storage Reservoirs - One Required with System

25 Liter Reservoir

40 Liter Reservoir

75 Liter Reservoir





DV25 Mounting Bracket

LA611

LA612

LA613

LA621

LC136M2

LA591USA

LA592USA

LA591USA

MEDICA® S/R/D 7/15 SYSTEMS ORDERING INFORMATION

All units include installation kit and full set of cartridgesNote: Some MEDICA D systems come with DV-25 Docking Vessel Reservoir. Please note above specifications.


MEDICA S 7

MEDICA S 7 w/booster pump

MEDICA D 7 w/booster pump

MEDICA D 7


MEDICA R 7

MEDICA R 7 w/booster pump

MEDICA S 15

MEDICA S 15 w/booster pump

MEDICA D 15



MEDICA R 15

MEDICA R 15 w/booster pump

ME007XXM1

ME007BPM1 (for feed waters of less than 60 psi)

MD007BPM2

MD007XXM1 w/DV-25

MD007BPM1 w/DV-25

MR007XXM1

MR007BPM1

ME015XXM1

ME015BPM1 (for feed waters of less than 60 psi)

MD015XXM1 w/DV-25

MD015BPM1 w/DV-25

MD015BPM2

MR015XXM1 (for feed waters of less than 60 psi)

MR015BPM1

124




‘

MEDICA® Pro 30/60/120 Water Systems(S/R/RE) for Clinical Analyzers

The MEDICA® Pro line of water purification systems is available in four models to

meet CLSI Type I water standards for clinical analyzers. The system incorporates an

integral 50 liter storage reservoir, RO, DI purification, UV photo-oxidation and ultra-

microfiltration technologies.


• Xport USB device for easy download of system performance data to comply

with GLP guidelines

• Unique space saving design

• Upgradable for higher flowrates

• High capacity Protek deionization cartridges

• Special E-cartridge to reduce CO2 and prolong the life of the DI packs

• Leak detection with auto shut down - minimizing the risk of flooding

• Emergency by-pass loop provides an uninterrupted supply of pure water in an

emergency

MEDICA® PRO S/R/RE SYSTEM SPECIFICATIONS


MODEL Inorganics MΩ-cm @ 25 C (77 F)


pHParticulatesµm

MEDICA® Pro S/R/RE >10 <30 <1 Neutral<0.05 µm

MODEL HxWxD (in) Weight (lbs)

Make-up Flow Rate

MEDICA® Pro S/R/RE 32.3x31.1x18.9 MEDICA Pro-S–260.0MEDICA Pro-R/RE –265.0

30/60/120 liters per hour at 15˚C

System Dimensions

MODEL

MEDICA® Pro S/R/RE



SourceMaximum

FI*Conductivity


Potable 10 1400 <0.5

PressureTemperature

1–35˚ C 90 max/10 min.

* Fouling Index

Silicappm

<0.05

Dispense Flowsto analyzer

4 l/min

125





MEDICA® Pro 30/60/120 Water Systems(S/R/RE) for Clinical Analyzers


MEDICA® PRO SYSTEMSORDERING INFORMATION


MEDICA Pro LPS MPXXXPSM1-115

MEDICA Pro S 30 MP030SBM1-115



MEDICA Pro R 30 MP030RBM1-115



MEDICA Pro RE 30 MP030REM1-115



Model Medica Pro-S Medica Pro-R Medica Pro-RE Medica Pro LPS

Pretreatment √ √ √

Extra Capacity Pretreatment

Optional Optional Optional

Air Gap √ √ √ √

Degassing Optional Optional √ Optional

Reverse Osmosis √ √ √

Integral 50 Liter Reservoir

√ √ √ √

Deionization √ √ √ √

2nd Deionization Cartridge

Optional Optional Optional Optional

UV Photo-oxidation √ √ √ √

Ultra-microfiltration √ √ √ √

Recirculation √ √

The MEDICA® Pro line of systems

UV lamp 254nm (destroy bacteria and help to reduce TOC levels) LC105

Ultra Microfilter 0.05 um LC109

Medpure L1 DI (Deionization) high capacity cartridge LC174

Protek L1 (high capacity adsorption pretreatment cartridge - standard size) LC175

Protek L2 (high capacity adsorption pretreatment cartridge - Large size) LC177

RO (reverse osmosis) cartridge 30 lph High flux reverse osmosis membrane LC179

RO cartridge 60 liter per hour High flux 30 liter per hour reverse osmosis membrane LC180

E-cartridge (Reduce CO2 levels to extend Medpure DI cartridge) LC181

Sanitization tablets (12 pk) CT3

Composite vent filter (maintain bacterial integrity of reservoir) LC136M2

MEDICA Pro - Starter Kit 1 (install kit, Protek L1, Medpure L1, 3 sanitization tablets) LC188

MEDICA Pro - Starter Kit 2 (install kit, Protek L2, Medpure L1, 3 sanitization tablets) LC189

Analyzer Feed pump 115V 60Hz LA632

High Flow Upgrade Kit for 2nd Medpure DI cartridge (includes fittings and 1 Medpure DI cartridge) LA700

E-cartridge Upgrade Kit LA701

Castors (useful for under bench installations also) LA704 USA

Note: Cartridge starter kit must be ordered with MEDICA Systems.

126




‘

MEDICA® R-200 Water Purification System for High Volume Clinical AnalyzersIntegrated water purification system designed to provide a purified water supply to high

volume clinical analyzers and laboratories with multiple analyzers. The MEDICA® R-200

System combines storage, purification and distribution in a single cabinet.


• Delivers up to 21 lpm of CLSI type II water purity

• Incorporates storage reservoir, UV, 0.2µm filter and RO technologies in one unit

• Leak detection with auto shut-down prevents flooding

• Full validation support documentation available to comply with regulatory

standards

• RS232 interface to record system performance for GLP

• Integrated by-pass loop ensures a constant water supply in an emergency

MEDICA® R-200 SYSTEM SPECIFICATIONS


MODEL ResistivityMΩ-cm @ 25 C


pHParticulates

MEDICA R-200 >10 <30 <10 Effectively Neutral<0.2 µm

MODEL HxWxD (in) Operational Weight (lbs)

MEDICA R-200 71.7x28.75x35.0 1190.0

System Dimensions

MODEL

MEDICA R-200


* Subject to correct operating and maintenance procedures

SourceMaximum

FI*Conductivity µS/cm (max) Free

Chlorine (ppm)

Potable 5 1000 <0.2

Pressure Maximum (psi)Temperature

Pressure Minimum (psi)

5–35˚ C 60 30

* Fouling Index

Silica ppm

<0.05

Make-upFlow Rate

200 liters per hour

Dispense Flowsto analyzer

Up to 21 L/min

127





‘

MEDICA® R-200 Water Purification System for High Volume Clinical Analyzers


RO Particle Pretreatment Filter

UV Lamp

In-line 0.2 µm Filter


Sanitization Solution (4 x 1000 ml)

LC159

LC158

LC160

LC156

B10000209

MEDICA® R-200 SYSTEMORDERING INFORMATION


MEDICA R-200 (230 volt 50 Hz)

MEDICA R-200 (115 volt 60 Hz)

MR200DSM1-230

MR200DSM1-115

128



LABORATORY WATER SYSTEMS – DEIONIZATION

‘

Portable Laboratory Deionization Systems

The lab wall-mountable deionization systems produce flow rates of 30 to 90 liters per

hour of high purity water. These systems are a cost effective alternative for small

volumes of deionized water. Built in meter, color change indicators and optional

resistivity meters make it easier to monitor your water quality.

B114 Deionizer

• Disposable cartridge system enables a quick and easy exchange when cartridge is

exhausted

• Battery operated wall mountable system with color coded resistivity meter displays

water quality

Vision 125 & 250 Deionizers

• Color change indicators allow users to monitor when resin exhausts and change

out is required

• Optional dispense gun can be connected to either system

Micromeg Deionizer

• Choice of either disposable or exchangeable deionization cartridge

• Battery operated wall mountable system with color coded resistivity meter displays

water quality

Accessories

Vision 125 & 250 Dispense Gun DSP404

Laboratory Performance Specifications

ModelResistivity

MΩ-cmMax Flow

lph

Max OperatingPressure

psi

Max OperatingTemperature

˚C

B114 1-10 30 10 35

Vision 125 1-10 60 90 35

Vision 250 1-10 60 90 35

Micromeg 1-10 90 50 35

System Dimensions

ModelHeightinches

Widthinches

Depthinches

Weightlbs

B114 15 7 6 5

Vision 125 15 4 4 5.5

Vision 250 26 4 4 9

Micromeg 20 8 9 14.3

B114

Vision 125 and 250

Micromeg

For higher flowrate needs, see Service Deionization Systems, Page 182.

129





Laboratory Disposable Deionization (DI)System

Disposable alternative to SDI tanks. This system is a floor mounted 0.25 cubic footcartridge housing and cartridge combination. It is designed to provide pretreated water toa wide range of water treatment applications. Similar to SDI tanks these disposablecartridges are available in carbon media, mixed bed, cation, and anion resins.

For use in:• General laboratory use• Food or beverage processors• Electronics and chemical industries • Hospitals and Universities• Pretreatment to Ultrapure water systems

Standard Features and Benefits • Produces up to 18 megohm water from a potable source • Max flow: up to 2 gpm (8 lpm)• Easy top-loading cartridge with o-ring seal• Many choices of resin media options• Easy cartridge replacement with minimal spillage• Housing comes tested with 3/4” unions attached• Multiple housings can be arranged in parallel or series to meet the flow required

Specification: (housing) Filter housing: 0.25 cubic feet (7 liters) Housing w/ FDA EPDM o-ring.

3/4“ bottom inlet/outlet

System Performance: Feed water parametersMaximum temp: 100°F (38°C)Pressure range: 100 psig (7 bars)Height: 27.5” (69.9cm)Housing weight: 18lbs (8.1kg)

Specification: (Cartridge) Height: 22 inOperational weight: 14 lbs

Ordering information:Item # LAB025DDIDesc: 1/4 cubic foot Gray PVC housing w/ FDA EPDM O-ring.

Consumables:Description Item #1/4 cu foot mixed bed deionizer cartridge for disposable DI system. LABDDIMB1/4 cu foot cation bed deionizer Cartridge for disposable DI system. LABDDICA1/4 cu foot anion bed deionizer Cartridge for disposable DI system. LABDDIAN

*custom media type cartridges available upon request. Minimum orders apply.

Contact technical support at 800-875-7873 x 5000 to discuss your requirements

130




LDIRS Deionization Recirculating Systems

Siemens Water Technologies LDIRS Series water purification systems deliverup to 4 gpm (15 lpm) of deionized water. The system is available in twomodels.

LDIRS03A compact, wall mountable panel capable of supplying up to 3 gpm (11 lpm)deionized water to a small distribution loop up to 100 linear feet in length

LDIRS04A larger skid mounted system capable of supplying up to 4 gpm (15 lpm) ofdeionized water to a larger distribution loop up to 500 linear feet in length.

NOTE: Flow rates dependent upon size and length of distribution piping loop.

System Standard Features: • Dual Filtration: 1.0 micron pre-filtration and 0.2 micron final filtration• Continuous recirculation through all post treatment components

including UV sterilizer and 0.2 micron final filtration• Bacteria destruct ultraviolet sterilizer (254 nm) • Built-in GFCI protection

System Benefits:• Flow rates up to 4gpm • Easy Installation• Both wall panel and skid mounted system have small footprint to

conserve space (additional space required for SDI components)


System Dimensions

Ordering Information: LDIRS Deionization Recirculation System, 3 gpm per minute max. (11 lpm max.) LDIRS03LDIRS Deionization Recirculation System, 4 gpm per minute max. (15 lpm max.) LDIRS04

Model Flow Rate (max) Feed Water Pressure Feed Water Temp.

LDIRS03 3 gpm (11 gpm)min. 40 psig (2.7 bar)max. 90 psig (6.2 barA)

min. 50˚F (10˚C)max. 90˚ (32˚C)

LDIRS04 4 gpm (15 gpm)min. 40 psig (2.7 bar)max. 90 psig (6.2 barA)

min. 50˚F (10˚C)max. 90˚ (32˚C)

Model Electrical Overall Dimensions (cm) Frame Materials Piping Materials

LDIRS03115VAC grounded receptacle

38 (86) L x 9 (23) D X 40 (102) H White PolyethyleneS-80 PVC and Polyethylene Tube

LDIRS04115VAC grounded receptacle

30 (76) L x 24 (61) D X 65 (165) HPowder Coated Carbon Steel

S-80 PVC


Bottom:DV 25 for use with these systems only:

PURELAB® Option-R 7/15

MEDICA® 7/15

PURELAB® Option-Q

Top:DV 35 for use with thesesystems only:

All PURELAB® Ultra Models

PURELAB® Prima 7/15/20

PURELAB® Option-S 7/15

PURELAB® Classic

LABORATORY WATER SYSTEMS – DOCKING VESSELS

Modular Docking VesselsDV 25 and DV 35

The new DV 25 and DV 35 docking vessels are state-of-the-art high purity water storage

reservoirs specially designed to accommodate the PURELAB® Ultra, Option, Prima and

MEDICA® water purification systems. The L-shaped docking vessels are designed as a base

for the water purification system, resulting in one integral, compact unit, that eliminates

the need for a separate reservoir and saves valuable bench space.


• Smooth internal surfaces with no crevices to harbor bacteria

• Inert polyethylene construction minimizes possibility of contamination of stored

water

• Sloping, self-draining base provides more complete sanitization and quicker rinse-out

time

• Recirculation capability combined with composite vent filter prevents ingress of

airborne bacteria and reduces CO2 levels and volatile organics within the reservoir

• Built-in dispense tap (DV 35 version only)

• Docking station design means no unsightly exposed interconnecting tubing or wiring

• Simple “plug-in” connections allow easy connection to the water purification system

for mistake-free operation

• Reservoir water level indicator


TECHNICAL SPECIFICATIONS

Product Codes

MODEL Volume TemperatureRange

Flow Rate (tap dispense)

DV 25 ModularReservoirs

DV 35 Modular Reservoirs

25 Liters

35 Liters

5–40˚ C

5–40˚ C

N/A

2.5 liters/min

MODEL HxWxD (in) Weight (lbs)(kg)-empty

Weight (lbs) (kg)-full



20x21x14

20x21x14

13.2 (6)

15.4 (7)

68.2 (31)

94.4 (42)

Dimensions and Weights

MODEL Inlet Outlet Return



5/16" (8 mm)

5/16" (8 mm)

5/16" (8 mm)

5/16" (8 mm)

5/16" (8 mm)

5/16" (8 mm)

Connections





LA621

LA620

CompositeVent Filter

Wall Bracket InstallationKit

LC136M2

LC136M2

LA591USA

LA591USA

Suppliedw/DV 25Suppliedw/DV 35

DV 35

DV 25

131




132



LABORATORY WATER SYSTEMS - WATER RESERVOIRS

Stand AloneStorage Reservoirs

Easy-to-use reservoir specially designed for the storage of purified water. Fully wall-

mountable to save valuable bench space.


• Inert polyethylene construction minimizes the risk of organic leachables

• Fully opaque to avoid algal growth

• Integrated 5-level switch control to allow automatic fill-up of reservoir by lab

water system

• Sloping base allows complete drainage of water from reservoir

• Composite vent filter eliminates contamination of water from CO2, volatile

organic compounds or airborne bacteria

• Available in 3 convenient sizes — 25 liter, 40 liter and 75 liter

• Designed for use with PURELAB® systems

RESERVOIR SPECIFICATIONS

MODEL HxWxD (in) Weight (lbs) Useable Volume

25 Liter Reservoir

40 Liter Reservoir

75 Liter Reservoir

16x14x11

21x16x12

27x20x14

11 lbs Empty/ 66 lbs Full



25 Liters

40 Liters

75 Liters



25 Liter Storage Vessel



Reservoir 40 Liter

Reservoir 75 Liter

Composite Vent Filter (supplied)

Wall Mounting Bracket (25/40 Liters)

Wall Mounting Bracket (75 Liters)

For use with MEDICA®, PURELAB® Prima and Option Systems

LA611 (for 7 or 15 lph systems)



LA587 (for 30,60 or 120 lph systems)

LA590 (for 30,60 or 120 lph systems)

LC136M2

LA591USA

LA592USA

133




LABORATORY WATER SYSTEMS – ACCESSORIES

Polypropylene Carboys

Convenient polypropylene carboys for storage of high purity water. Carboys come

with or without spigot for ease of use. Large handles provide easy transportation in

the lab.

• Steam autoclavable at 121˚ C

• Large handles help with pouring and carrying

• Front spigot for easy dispensing


Part # Description

CARBOYPP2 Carboy 2.5 gal (10L) PP without spigot, autoclavable

CARBOYPP5 Carboy 5 gal (20L) PP without spigot, autoclavable

CARBOYPP2SP Carboy 2.5 gal (10L) PP with spigot, autoclavable

CARBOYPP52SP Carboy 5 gal (20L) PP with spigot, autoclavable

134




Polypropylene Faucets

Designed for easy dispensing of deionized or distilled water where high purity is

required. Reduces the risk of bacteria.

• Laboratory faucets are available in countertop and wall mounted style

• Available with integral vacuum breakers

• Recirculating faucet available

• Made from pure unpigmented polypropylene


Part # Description

LFSPRF1PP Polypro recirculating faucet, deck mount gooseneck

LFSPF10VB Polypro deck mount lab faucet with integral vacuum breaker (welded assembly)

LFSPF30VB Polypro deck mount lab faucet with integral vacuum breaker (threaded assembly)

LFSPF20VB Polypro wall mount lab faucet with integral vacuum breaker (welded assembly)

LFSPF40VB Polypro wall mount lab faucet with integral vacuum breaker (threaded assembly)

LFSPF10STD Polypro faucet, gooseneck deck mount (welded assembly)

LFSPF20STD Polypro faucet, gooseneck wall mount (welded assembly)

LFSPF30STD Polypro faucet, gooseneck deck mount (threaded assembly)

LFSPF40STD Polypro faucet, gooseneck wall mount (threaded assembly)

135





TOTAL-CHECK™ 900

TOC (Total Organic Carbon) Monitor

The Total-Check™ 900 TOC monitor provides a total picture of water quality. Thisstand alone unit can be used with any lab water purification system to continuallymeasure the levels of organic substances in high purity water at the systems’dispense. Total-Check™ 900 offers quick, accurate, easy to read measurements ofwater quality being produced.

• 1-999 ppb TOC levels• Calibration services available • Easy to read, single LCD screen• Dual wavelength 185/254nm UV lamp

PERFORMANCEOperating Range: 1-999 ppb TOCDisplay Resolution: single ppb incrementsRepeatability: +/-5%Accuracy: +/-15% or +/- 1 ppb (whichever is greater)

WATER SAMPLE:Inlet Pressure: 70 psi MAX (4.8 bar) Temperature: 5 to 35ºC (41-95ºF)Resistivity: 15MΩ-cm@25ºC ** May also be use with sample resistivity between 5 and 15MΩ-cm@25ºC, repeatability and

accuracy levels will be lower.

SPECIFICATIONS:Operating Temperature: 15 to 30ºCOperating Weight: 4.2lbs (1.9kg) Height: 9.3 inches (237 mm) Width: 6.1 inches (155 mm)Depth: 5.9 inches (150 mm) Electrical: 100-230V /50-60Hz

ORDERING INFORMATION:US Model TM900M001UE Model TM900ME01

CONSUMABLES / ACCESSORIES: Replacement UV Lamp: TM900M001 Inlet / Outlet tubing: TMFTPF04949Tube Tubing 25’: TMFTPF04945 Luer Fittings (5 pk): TMFTPF04950

136




Remote Control Stations

Remote user interface for the PURELAB® Prima, PURELAB® Option and MEDICA® waterpurification systems. Easy to use, mountable unit fully replicates the GRID (graphically intuitive display) panel providing constant water system monitoring capabilitiesfrom a remote location.

• Replicates GRID display monitor on water purification system• Easy to read display with icons and graphical representation of the process flow• Audio visual alarms to alert user when consumables need replacing or when

reservoir water level is low• Provides parallel display capabilities to simultaneously display system parameters

from 2 different locations• RS232 port for connection to a printer for easy data collection of water quality

and system performance for compliance with GLP guidelines• Compact size fits in any location• Wall, bench, panel, or furniture mountable offers flexibility and convenience

STANDARD FEATURES AND BENEFITS

REMOTE CONTROL STATION SPECIFICATIONS

Weight (lbs) H x W x D Temperature Maximum Distance from Water System (Ft)

2.2 4.75 x 7.90 x 2.75 5˚ C–40˚ C 24.6



PURELAB Prima 7/15/20 RES

PURELAB Option-S 7/15 RES

PURELAB Option-R 7/15 RES

MEDICA 7/15 RES

LA628

LA624

LA625

LA627

137





Remote Dispense Gun

Premium dispense gun allows dispensing of purified water from a remotelocation. Ergonomic design and push and lock dispense mechanism providescomfort and drop-by-drop control of purified water while filling laboratorycontainers.

• Ability to dispense up to 6 1/2 feet from the water purification system at a flowrate up to 1.5 lpm

• Can be operated with optional point of use filter• Integral recirculation capability up to point of dispense when used with a water

system with recirculation pump• Drop-by-drop dispense control for greater dispensing accuracy• Push back and lock dispense mechanism allows hands-free operation• Wall mountable

STANDARD FEATURES AND BENEFITS



Remote Dispense Gun

Remote Dispense Gun

LA629 For use with PURELAB® Option R 7/15

LA644 For use with PURELAB® Ultra and PURELAB® Classic

REMOTE DISPENSE GUN SPECIFICATIONS

Tube Length Flow Rate(Depending on water system used)

Approx 6'.5" 0.8–1.5 lpm

138




Dimensions 500 1000

LABORATORY WATER SYSTEMS - FILTRATION SYSTEMS

Point-of-Use High Purity WaterCapsule Filters

Designed to provide absolute filtration at point of dispense on laboratory ultrapure

water systems or after standard service deionization systems. Disposable design makes

filtration easy and convenient.


• Available in 0.1 µm or 0.2 µm pore size ratings

• Two convenient sizes — 500 cm2 and 1000 cm2 effective filtration area

• Hydrophilic polyethersulfone bacterial retentive membrane–based on

Brevundimonas diminuta challenge (HIMA)

• Integrity tested and validated, making them ideal for pharmaceutical and

microelectronics applications

• Low extractable welded housing and materials—no adhesives or glues

• Non-pyrogenic per USP and LAL testing

Capsule Filters

0.2 µm 1/4" NPTM x 1/4" Hose Barb

Half size 0.1 µm 1/4" NPTM x 1/4" Hose Barb

Half size 0.2 µm 1/4" NPTM x 1/4" Hose Barb

Half size 0.1 µm 1/4" NPTM x 1/4" NPTM

Half size 0.2 µm 1/4" NPTM x 1/4" NPTM

Half size 0.1 µm 1/4" NPTM x 1/4" Hose Barb w/filling bell

Half size 0.2 µm 1/4" NPTM x 1/4" Hose Barb w/filling bell

Full size 0.1 µm 1/4" NPTM x 1/4" Hose Barb

Full size 0.2 µm 1/4" NPTM x 1/4" Hose Barb

Full size 0.1 µm 1/4" NPTM x 1/4" NPTM




CW3750

FCCFH11S1

FCCFH11S2

FCCFH12S1

FCCFH12S2

FCCFH14S1

FCCFH14S2

FCCFP11S1

FCCFP11S2

FCCFP12S1

FCCFP12S2

FCCFP23S1

FCCFP23S2

Filtration Area

Diameter (OD)

Length/in (cm)

Materials

Cartridge

Media


Maximum Temperature

Max. Oper. Pressure

Max. Momentary Pressure

Filtration Rating

Toxicity

Validation

Recommended Water Flow Rates –gpm (lpm)

0.1 µm

0.2 µm

Integrity Test - Pore Size (MinimumWater Bubble Point)

0.1 µm

0.2 µm

Sanitizing Agents

500 cm2

2.7" (6.8 cm)

4.8" (12.2)

Polypropylene caps, core and cage

Pleated polyethersulfone

140° F (60° C) @ 30 psid (2.1 bar)

60 psid (4.1 bar) @ 20 C

100 psid (7.0 bar) @ 20 C

100% Absolute

Non-toxic by USP Class VI Biological test for plastics

HIMABacterial challenge test methods (107 organisms/cm2)

0.04 (0.16)/1 psid

0.1 (0.38)/1 psid

≥ 90 psig (≥ 6.2 bar)

≥ 45 psig (≥ 3.1 bar)

Hydrogen peroxide or autoclaved for 20 minutes at 121 C

1000 cm2

2.7" (6.8 cm)

6.7" (16.9)

Polypropylene caps, core and cage

Pleated polyethersulfone

140° F (60 C) @ 30 psid (2.1 bar)

60 psid (4.1 bar) @ 20 C

100 psid (7.0 bar) @ 20 C

100% Absolute

Non-toxic by USP Class VI Biological test for plastics

HIMA Bacterial challenge test methods (107 organisms/cm2)

0.1 (0.38)/1 psid

0.3 (0.38)/1 psid

≥ 90 psig (≥ 6.2 bar)

≥ 45 psig (≥ 3.1 bar)

Hydrogen peroxide or autoclaved for 20 minutes at 121˚ C

139




Convenient, economical, high quality modular water filtration system that operates

on city water pressure and can easily be expanded to fit most needs. No electricity

required. Up to 18 Megohm water quality can be achieved with this system.


• Consistent source of high quality water at 50% the cost of distilled water

• Removes organics, phosphates, chlorine, and essentially all ionizable

constituents from water supply

• Convenient color change resin to indicate resin exhaustion

• Quick and easy installation

• No instruments needed

• Water quality up to 18 megohm-cm resistivity can be achieved

• Flexible system configuration to meet specific needs

SPECIFICATIONS

Cartridge Flow Rate GPH Capacity(grains as CaCO3) Dimensions Shipping Weight Maximum Operating

Pressure (psi)

Adsorber

Metex

Universal

Research

7.2

7.2

7.2

7.2

NA

3200

1600

1000

3 1/2"x19 3/4"

3 1/2"x19 3/4"

3 1/2"x19 3/4"

3 1/2"x19 3/4"

6 lbs single/36 lbs six pack




30

30

30

30

Cartridge Removal

Adsorber

Metex

Universal

Research

For pretreatment of water containing organics, free chlorine, phosphate complexes, and turbidity.

For removal of all metallic ions to a level of 1% of the influent concentration. Removes ammonia and other cations from condensate samples.

Reduces ion concentration to a level obtainable by single distillation. All ionizable constituents are removed except free carbon dioxide and silica.

Reduces ion concentration to a level obtainable by triple distillation.Essentially all ionizable constituents including silica and free carbon dioxide are removed.


Absorber Cartridge single pack

Absorber Cartridge six pack

Metex Cartridge single pack

Metex Cartridge six pack

Universal Cartridge single pack

Universal Cartridge six pack

Research Cartridge single pack

Research Cartridge six pack

Single assembly bracket single pack

Single assembly bracket six pack

Single assembly bracket with faucet adapter single pack

Single assembly bracket with faucet adapter six pack

Duplex assembly Bracket single pack

Duplex assembly Bracket six pack

Duplex assembly Bracket with faucet adapter single pack

Duplex assembly Bracket with faucet adapter six pack

3C0200002

3C0200003

3C0400002

3C0400003

3C0600002

3C0600003

3C0800002

3C0800003

3C1200003

3C1200004

3C1200007

3C1200008

3C1200011

3C1200012

3C1200015

3C1200016

Applications

Environmental and humidity chambers

Recharging lead and acid batteries for cars, fork lifts, etc

Electronic cleaning equipment (with 99% isopropyl alcohol bath to wash solder

trails and flux off circuit boards)

Steaming devices used in food industry

Photo processing and printing applications

Humidifiers (including computer room humidifiers)

Ice Machines

Hydroponics

LABORATORY WATER SYSTEMS - FILTRATION SYSTEMS

IWT® Cartridge Filtration System

140



LABORATORY WATER SYSTEMS - REPLACEMENT CARTRIDGES

Replacement Cartridges for LaboratoryWater Purification Systems

Cartridges provide ultra-high-purity water for use with MODULAB®, PURELAB®, Millipore®

and Barnstead® water systems. The wide selection of cartridge styles and types allows

custom-configuration of your laboratory water system to meet a variety of application

needs.


• Higher ion exchange capacity than other manufacturers’ cartridges

• Lower cartridge replacement costs

• Unique diffuser design for even distribution of water and maximum cartridge life

• Vacuum packaging for maximum shelf life

• Ultrasonic-welded seams and joints for extractable-free product water

• Date coded for critical quality control

• GMP cartridge manufacturing facility

• Patented downflow design maximizes removal efficiency and cartridge capacity

We offer the following types of resin:

Activated Carbon Used for pretreating tap water before deionization. Removes traces

of chlorine and organics through adsorption.

Colloidal Removal Resin Removes colloids and bacteria by ion exchange and

adsorption. Protects and enhances performance of deionization resin, and extends

final filter life.

Cation Exchange Resin Removes positively charged impurities. When used alone, this

resin will lower solution’s pH. Usually used in conjunction with anion resin in a mixed

bed ion exchange cartridge.

Anion Exchange Resin Removes negatively charged impurities. When used alone, this

resin will raise a solution’s pH.

Oxygen Removal Resin Removes oxygen and prevents corrosion in water cooling loop

applications. For use on feed water containing less than 10 ppm ionized solids.

Mixed Bed Ion Exchange Contains a mixture of cation and anion resins in a mixed bed

to purify water up to 18.2 megohm-cm. Used to polish pretreated water, or to

produce high-purity water in a loop system.

Organic Scavenger/Removal Resin Removes trace organics from deionized water to less

than 10 ppb TOC.

High Capacity Ion Exchange Combines anion and cation resin in a 2-bed configuration.

Used for purifying large quantities of water at a lower purity level than provided by

mixed bed deionization. May also be used to pretreat mixed-bed cartridges for longer

cartridge life.

Custom Cartridges

Specialty resin cartridge configurations are available to meet your needs. Call our

technical service department for more information. Minimum order volumes apply.

141





Replacement Cartridges for Siemens WaterTechnologies, USFilter® and ELGA®Laboratory Water Systems

Ultra-microfilter

Point-of-Use Filter

Purification Pack-RO Feed (for MK1 Ultras)

Purification Pack-SDI Feed (for MK1 Ultras)

Purification Pack-Low Ionic (for MK1 Ultras)

Purification Pack-Low TOC (for MK1 Ultras)

Ultrafilter (5,000 MWCO)

Labpure S1 DI cartridge - RO feed

Labpure S2 DI cartridge - SDI feed

Labpure S3 DI cartridge - Low Ionic

Labpure S4 DI cartridge - Low TOC

LC109

LC134

LC147

LC148

LC149

LC150

LC151

LC182

LC183

LC184

LC185

PURELAB® Ultra Water System Cartridges

PURELAB® Classic Water System Cartridges

Purification Cartridge (For MK1 Classic)

Ultra Filter 5000 mwt

Purification Cartridge (For MK1 Classic)

Endoguard 5000 MWCO UF Cartridge (For MK1 Classic)

Final Filter 0.2 µm (1/pk)

Labpure S5 purification cartridge

LC162

LC169

LC126

LC151

LC134

LC186

PURELAB® Prima Water System Cartridges

Pretreatment Cartridge (PURELAB Prima 7/15/20)

Pretreatment 5 Micron Carbon Filter (Prima 30/60/90/120)

RO Module (7.5 liter/hour) — (Prima 7/15/20)

RO Module (30 liter/hour) — (Prima 30)

RO Module (60 liter/hour) — (Prima 60, 120)

RO Module (Prima 90)

LC140

LC123

LC143

LC115

LC119

LC120

PURELAB® UHQ Water System Cartridges

Reverse Osmosis Cartridge

Ultra Microfilter Cartridge 0.05 µm

UHQ Purification Pack (2 Organic Absorption Cartridges and 2 Ion Exchange Cartridges)


UHQ5

LC109

UHQPACKA

UHQ4

PURELAB® Option Water System Cartridges

Pretreatment Cartridge (Option 7 & 15)

Pretreatment 5 micron Carbon Filter (Option 30 & 60)

Purification Cartridge (Option R&S 7 & 15)

Purification Cartridge (Option-Q 7 & 15)

Purification Cartridge (Option 30 & 100)

RO Module (7.5 liter/hour) — (Option 7 & 15)

RO Module (30 liter/hour) — (Option 30)

RO Module (60 liter/hour) — (Option 60)

Point-of-Use Filter (Option 7 & 15-R)

Point-of-Use Filter (Option 30 & 60-R)

LC140

LC123

LC141

LC163

LC114

LC143

LC115

LC119

LC145

LC106

142





MEDICA® Water System Cartridges

Pretreatment Cartridge (Medica 7/15)

5 µm Carbon Filter (Medica 30/100)

Purification Cartridge (Medica 7/15)

Purification Cartridge (Medica 30/100)

RO Module (Medica 7/15)

RO Module (30 lph)

RO Module (60 lph)

RO Module (100 lph)

In-Line 0.2 µm Filter (Medica 7/15)

In-Line 0.05 µm UMF Filter (Medica 30/100)

LC140

LC123

LC141

LC114

LC143

LC115

LC119

LC137

LC125

LC109

MEDICA® Pro Water System Cartridges

0.05µm ultra microfilter LC2109

Medpure L1 DI (Deionization) high capacity cartridge LC174

Protek L1 (high capacity adsorption pretreatment cartridge - standard size) LC175

Protek L2 (high capacity adsorption pretreatment cartridge - Large size) LC177

RO (reverse osmosis) cartridge 30 lph High flux reverse osmosis membrane LC179

RO cartridge 60 lph High flux reverse osmosis membrane LC180

E-cartridge (Reduce CO2 levels to extend Medpure DI cartridge) LC181

Castors (for easy mobility) LA704USA

MEDICA® R-200 Water System Cartridges

RO Pretreatment Filter

In-line 0.2µm Filter


Bacterial Vent Filter

LC159

LC160

LC156

LC157

CENTRA® Water System Cartridges

Bacterial Filter


0.2µm Filter

RO Module

Pretreatment Filter

LC157

LC156

LC160

LC161

LC159

MODULAB® High Flow System Cartridges

Carbon Cartridge

Organic Removal Cartridge

0.05µm Micro Ultra Filter

0.2µm Bacteria Filter

MLHF20CAR1

MLHF20OS01

MLUF020S05

MLUF020S2

PURELAB® Plus Water System Cartridges

PURELAB Purification Quadpack w/0.2 µm Final Filter

PURELAB Purification Quadpack

Endoguard 5000 MWCO UF Membrane Cartridge


PLC6000

PLC5000

LC151

LC134

143






MODULAB® Carbon Cartridges

10" Carbon Cartridge (1/pk)



10" Pretreatment Carbon Cartridge/5 µm Prefilter

20" Pretreatment Carbon Cartridge/5 µm Prefilter

DICR1000-1

DICR1000-4

DICR2000-1

LBCPT1002

LBCPT2004

MODULAB® Water System Cartridge Kits

Modulab Cartridge Kit for RO Feed – Contains 1 EA CWCF23110,2EA DIMN1000-1, 1 EA DIOR1000-1, 1 EA CW3750 Final FilterModulab Cartridge Kit for DI Feed – Contains 1 EA DICR1000-1, 2EA DIMN1000-1, 1 EA DIOR1000-1, 1EA CW3750 Final FilterModulab UV/UF Start Up Kit 20" – Contains (1) 20" UFMembrane (40,000 MWCO), (1) 0.1 µm Capsule FilterModulab Clinical Cartridge Kit

LBMPC1006

LBMPC1005

UFSU8202

LBCCK1002

Miscellaneous Laboratory Cartridges

Mixed Bed 10" cartridge PVC P-154

Mixed Bed 10" cartridge

Mixed Bed 10" cartridge with porex disc, 4 pack

Mixed Bed 5" cartridge with porex disc

Anion Cartridge 10"

Anion/Cation separate Bed 5" cartridge

Anion/carbon separate Bed 10" cartridge

DIMNP154

DIMN4000

DIMN1000-4PD

DIMN0500-PD

DIOH4000

DISB0500

DIOH4010

MODULAB® Water System Membrane Cartridges

10" RO Membrane (TFC)

20" RO Membrane (TFC)

10" UF Membrane (10,000 MWCO)



DIRO3002

DIRO3222

UFPW3308T

DIUF8102

DIUF8202

MODULAB® Water System Resin Cartridges

10" Mixed Bed Cartridge (1/pk)

20" Mixed Bed Cartridge (1/pk)

10" Organic Cartridge (1/pk)

20" Organic Cartridge (1/pk)

10" Pureone Cartridge (1/pk)

10" Separate Bed DI (1/pk)

20" Separate Bed DI (1/pk)

12" Mixed Bed Cartridges (1/pk)

12" Mixed Bed Cartridges (2/pk)

DIMN1000-1

DIMN2000-1

DIOR1000-1

DIOR2000-1

DIMBS1000

DISB1000-1

DISB2000-1

DIMM1200-1

DIMM1200-2

144




LiquiPure® Replacement Cartridges forMillipore® Laboratory Water Systems

LiquiPure® 1 Replacement Cartridges for Milli-Q® and Alpha-Q ™ Laboratory Water Systems

The LiquiPure1 replacement cartridges for Milli-Q and Alpha-Q laboratory water systemsprovide ultra-high-purity water with very low TOC and extractable levels. The cartridgecontains a variety of purification media to remove specific types of feed watercontaminants. All wetted parts are constructed of all-natural polypropylene tominimize extractables, while a unique downflow design ensures optimum removal oforganic and inorganic impurities. A pigmented polypropylene exterior prevents light frompenetrating to minimize microbial growth. Cartridge contains macroreticular activatedcarbon, ultra-high-purity mixed bed ion exchange resin, and an organic scavenger.

LiquiPure® CLC Replacement Cartridges for Millipore AFS® Analyzer Feed Systems

The LiquiPure CLC replacement cartridges for Millipore AFS Analyzer Feed systems provide high-puritywater to feed laboratory clinical chemistry analyzers. The cartridge contains ultra-high-puritymixed bed ion exchange resin to produce NCCLS Type 1 quality water. All wetted parts areconstructed of all natural polypropylene to minimize extractables, while the unique designensures optimum removal of inorganic impurities. A pigmented polypropylene exterior preventslight from penetrating to minimize microbial growth. Cartridge contains ultra-high-purity mixedbed ion exchange resin.

LiquiPure® RO Replacement Cartridges for Millipore Milli-RO® and AFS® Systems

These duplex RO pretreatment cartridges for Millipore Milli-RO and AFS Analyzer Feedsystems includes granular activated carbon for chlorine removal, depth filtration forparticulate removal and a food grade sequestering agent to protect the RO membranefrom fouling and scale formation. Designed in a duplex configuration, the cartridge can berotated and reconnected when one-half has been exhausted. All wetted parts areconstructed of all natural polypropylene to minimize extractables, while thepigmented polypropylene exterior prevents light from penetrating to minimize microbialgrowth. Cartridge contains granular activated carbon, an anti-scaling agent and a prefilter.


LiquiPure 1 Cartridge

LiquiPure 1 Cartridge w/0.2 µm Final Filter


LP1000

LP2000

LC134

ORDERING INFORMATIONLiquiPure CLC Cartridge

LiquiPure CLC Cartridge



LP3000

LP3000R

LP3000R & LP4000FCCFH11S2

LP3000R FCCFH11S2

CPMQ004R1CPMQ004D2CPMQK05R1CPMQK05D2CPMQK05RE

MPGL04SK2

Millipore Equiv. Part NumberCP4ALLRES

CP4ALLRES

CPKITAFS2

CPAFS04R1

Siemens Catalog Number


LiquiPure RO Cartridge

LiquiPure RO Cartridge

LP4000

LP4000R

Millipore Equiv. Part Number

CPR0P0402

CPR0P0402

SiemensCatalog Number

Millipore Equiv. Part NumberSiemens Catalog Number

145





Replacement Cartridges for Millipore®

Laboratory Water Systems


Replacement Cartridges for Milli-Q® and Other Millipore Systems Millipore Equiv. Part Number

High Capacity Carbon (4/pk)

Mixed Bed (2/pk), Exchange Capacity, 540 Grains as CaCO3

Organic Scavenger (1/pk)

UF Membranes, 10k MW (1/pk)

Prefilter 12" 5 µm

1 ea. DICM 1000-1 Carbon, 2 ea. DIMM 1200-2 Ion Exchange

CWCFF 1492 Capsule Final Filter (1ea.)

1 ea. DICM 1000-1 Carbon, 2 ea. DIMM 1200-2 Ion Exchange,

1 ea. DIOM 1200-1 Organic Scavenger, 1 ea. CWCFF1492

1 ea. DICM 1000-1 Carbon, 2 ea. DIMM 1200-2, 1 ea.

CWCFF1492, 1 ea. 10” Polysulfone 0.2 µm Cartridge

1 ea. FCWN12152, DICM 1000-1, DIMM 1200-1, DIOM 1200-

1, CWCFF1492

CDFC01204

CPMB01202

CDEX01201

CDUF01201

CDPRM1206

CFUF01204

CFOF01205

CFIF01205

CFOF012P5

Replacement Cartridge Kits for Millipore Super-Q® Systems Siemens Catalog Number

Activated Carbon (1/pk)

Ion Exchange (>2000 Grain Capacity) (1/pk)

Organic Scavenger (1/pk)

UF Cartridges

0.22 µm Filter 20" (1/pk)

DICM2200-1

DIMM2200-1

DIOM2200-1

CDUF02201

FCDIO20S2

Replacement RO Membranes for Millipore Milli-RO® Plus and AFS® Systems Siemens Catalog Number

TFC RO Membrane

TFC RO Membrane (w/out housing)

TFC RO Membrane (w/out housing)

CA Membrane

TFC RO Membrane

ROGTM3512

LABROKIT

LABROKIT

ROETM3512

60 - CDRC025S1CDRC025S1CDRC025SH

Where Used

3, 4, 5 Bowl Milli-Q or Milli-Q Plus Systems

3, 4, 5 Bowl Milli-Q or Milli-Q Plus Systems

4 & 5 Bowl Milli-Q or Milli-Q Plus Systems

4 & 5 Bowl Milli-Q or Milli-Q Plus Systems

Milli-RO® Systems

4-Bowl Life Science or 3-Bowl Standard

4-Bowl Analytical System

5-Bowl Milli-Q

5-Bowl Milli-Q


CDFC02203

CPMB02202

CDEX02201

CDUFM2201

CVDI02TPE

Where Used

4-Bowl Super-Q (Housing #1)

4-Bowl Super-Q (Housing #2 & #3)

4-Bowl Super-Q (Housing #4)

4-Bowl Super-Q (Housing #4 optional)

4-Bowl Super-Q (Housing #4 optional)


CDRC012S0

CDRC012HG

CDRCH12HG

CDRO012S0SL2M129V8

60 - CDRC025S1CDRC025S1CDRC025SH

Where Used

Milli-RO 4 & 15

Milli-RO 6-10 and AFS Systems

Milli-RO 30/60/90

Milli-RO 4 & 15

Milli-RO 60/120

Siemens CatalogNumber

120 120

Organex CartridgeIonic CartridgePurification Pack (Elix, RO & Distillation Feed)Purification Pack (DI Feed)Pyroguard 5000 MW Hollow Fiber UF CartridgeVOC CartridgePretreatment FilterPretreatment Filter

DIMOS1201DIMEX1201PPMRO1201PPMDI1201CQUF500DICMVOL01PRCM1201PRCMS001

QTUM00EXQTUM00IXQGARD00R1QGARD00D2CDUFHF05KQTUM000VXPROG00002PROG00001

Milli-Q Academic, Biocel, Synthesis, Element, GradientMilli-Q Academic, Biocel, Synthesis, Element, GradientMilli-Q Academic, Biocel, Synthesis, Element, GradientMilli-Q Academic, Biocel, Synthesis, Element, GradientMilli-Q Biocll, SynthesisMilli-Q Academic, Biocel, Synthesis Element GradientMilli-Q Elix 3,5,10Milli-Q Elix 3,5,10

Replacement Cartridges for Milli-Q® Ultrapure Water Systems Siemens Catalog NumberWhere Used

DICM1000-4

DIMM1200-2

DIOM1200-1

CDUF01201

FCR001205

LBCCM1202

LBRCM1002

LBCCM1202

FCWN010S2

FCWN010S2

DICM1000-1

DIMM1200-1

DIOM1200-1

CWCFF1492


146




Replacement Cartridge kits for Barnstead®



DescriptionSiemens Catalog Number

1 ea. CW0835 Colloid Removal Resin,1 ea. CW0803 High Capacity 2-Bed Resin,2 ea. CW0809 Mixed Bed

1 ea. CW0835 Colloid Removal Resin,2 ea. CW0809 Mixed Bed

1 ea. CW0836 Organic Removal,1 ea. CW0820 Organic Scavenger,1 ea. CW0809 Mixed Bed

1 ea. CW0836 Organic Removal, 1 ea.CW0803 High Capacity 2-Bed Resin,1 ea. CW0809 Mixed Bed, 1 ea. CW0820 Organic Scavenger,


1 ea. CW0836 Organic Removal,1 ea. CW0803 High Capacity 2-Bed Resin,1 ea. CW5027 Mixed Bed,1 ea. CW5021 Organic Scavenger, Down Flow

1 ea. CW0835 Colloid Removal Resin,1 ea. CW0809 Mixed Bed,2 ea. CW5027 Mixed Bed,2 ea. CW3751 Final Filter

1 ea. CW0836 Colloid Removal,1 ea. CW0809 Mixed Bed,1 ea. CW5021 Organic Scavenger, Down Flow,1 ea. CW5027 Mixed Bed,2 ea. CW3751 Final Filter


1 ea. CW0835 Colloid Removal Resin,2 ea. CW5027 Mixed Bed

1 ea. CW0836 Organic Removal,1 ea. CW5027 Mixed Bed,1 ea. CW5021 Organic Scavenger, Down Flow

1 ea. CW0836 Organic Removal,1 ea. CW0803 High Capacity 2-Bed Resin,1 ea. CW5027 Mixed Bed,1 ea. CW5021 Organic Scavenger, Down Flow

CW3804

CW3805

CW3806

CW3807

CW4801

CW4802

CW5025

CW5026

CW5028

CW5029

CW5022

CW5023

Replacement Cartridge Kits for NANOpure™ and Other Barnstead Systems

Barnstead replacement cartridges continued on next page

Barnstead Equiv. Part Number

D3804

D3805

D3806

D3807

D4801

D4802

D5025

D5026

D5028

D5029

D5022

D5023

Where Used

NANOpure 4 Module Type I

NANOpure 3 Module Type I

NANOpure 3 Module Type I w/ORGANICfree™

NANOpure 4 Module Type I w/ORGANICfree

Quad Style NANOpure Type I

Quad Style NANOpure Type I w/ORGANICfree

Quad Style NANOpure Type I w/ORGANICfree

Pretreated FeedQuad Style NANOpure Type I w/ORGANICfree

Pretreated Feed

E-pure™ 4 Module Type I

E-pure 3 Module Type I

E-pure 3 Module Type I w/ORGANICfree

E-pure 4 Module Type I w/ORGANICfree

147





Replacement Cartridges for Barnstead®



Replacement Cartridge Kits for NANOpure™ and Other Barnstead SystemsSiemens

Catalog Number

High Capacity, 2-Bed Ion ExchangeMixed Bed Ion ExchangeOxygen Removal ResinActivated CarbonCation Removal ResinOrganic Scavenger ResinOrganic Scavenger, Down FlowMixed Bed, Organic Removal Colloid, Organic RemovalOrganic Removal Oxygen Removal Mixed Bed, Oxygen Removal, Organic RemovalAnion Removal Mixed Bed, Down Flow

CW0803CW0809*CW0811CW0813CW0815CW0820CW5021CW0832CW0835CW0836CW8809CW8811CW0760CW5027

DescriptionBarnstead Equiv.

Part Number

D0803D0809D0811D0813D0815D0820D5021D0832D0835D0836D8809D8811D0760D5027

Where Used

NANOpure, E-pure™, B-pure™, Cooling LoopsNANOpure, B-pure, Older NANOpure Cooling LoopsB-pure, Cooling LoopsB-pure, Cooling LoopsB-pure, Cooling LoopsNANOpure II, Older NANOpure SystemsQuad Style NANOpure, E-pureB-pure, Still PretreatmentNANOpure, B-pure, E-pureNANOpure, E-pure, Pretreatment for Organic RemovalB-pure, Cooling LoopsB-pure, Cooling LoopsB-pure, Cooling LoopsQuad Style NANOpure, E-pure

Organic Free Cartridge Organic Cartridge Kit DI FeedPretreat Cartridge for Tap & DI FeedUltrapure CartridgeCartridge Kit for RO or Dist. FeedPretreatment DI FeedUltrapure Cartridge0.2µm FilterOrganic Free CartridgePretreatment Cartridge for Dist. or RO FeedUltralow Organics Cartridge for RO or Dist. FeedCartridge Pack Organic Free for DI FeedSanitization CartridgeSanitization Cartridge5µm CartridgeSanitization CartridgeCartridge for RO FeedCartridge Kit for DI Feed

CB50252CB50254CB50251CB50253CB50257CB50230CB50233CB7033X2CB50229CB50231CB50280CB50281CB50223CB50258CB502113CB50245CB50282CB50283

D50252D50254D50251D50253D50257D50230D50233FL703X2D50229D50231D50280D50281D50223D50258D502113D50245D50282D50283

NANOpure Infinity®NANOpure InfinityNANOpure InfinityNANOpure InfinityNANOpure InfinityEASYpure®EASYpureEASYpureEASYpureEASYpureDiamond™DiamondNANOpure®, G-pure, NANOpure Infinity®NANOpure®, G-pure, NANOpure Infinity®Diamond RO, Diamond TIIEASYpureDiamondDiamond

* CW0809 — not for use with Bantam deionizers

Reverse Osmosis MembraneDI CartridgeRemote Dispenser Cross Flow Final Filter Quad StyleReplacement Ultrafilter Element for D4721Ultrapure Ion ExchangeRO MPS CartridgeCarbon FilterDeionizationDeionizationPrefilter, 5µmPretreatment Carbon CartridgeMembrane 15L/hrRO MembraneUF Cartridge

CB2732CW3750CW3751CB4722CB5021CB502114CB502115CB50229CB50245CB9004CB9005CB9006CBFL1265X1CBFL1192Y1

D2732D3750D3751D4722D5021D502114D502115D50229D50245D9004D9005D9006FL1265X1FL1192X1

ULTROpure™ and ROpure™ LPEASYpure II and RF/UVFinal FiltersFinal FiltersNANOpure Quad., E-pureNANOpure Diamond RONANOpure Diamond ROEASYpure SystemsEASYpure II LF and UVROpure InfinityROpure InfinityROpure InfinityNANOpure Diamond RONANOpure Diamond RO

148




Replacement Cartridges for Barnstead®


Replacement Hose Nipple Cartridge Kits for Barnstead and Other Cartridge Housings

1/2 Size, Mixed Bed Oxygen Removal

High Capacity, 2 Bed

Mixed Bed

Pretreatment

Organic Removal

Mixed Bed (No Dye)

Organic Removal, Mixed Bed

2/3 Size, High Capacity Mixed Bed

Description

Note: Hose Nipple Cartridges are non-pressure applications; outlet must be vented to atmosphere, minimum inletpressure should be 5 psig (0.3 bar) and designed for 3/8" H.B. (9.5mm) connection.

Where Used

180 Grains as CaCO3

1650 Grains as CaCO3

730 Grains as CaCO3

1450 Grains as NaCl to 1 megohm-cm Endpoint

730 Grains as CaCO3

575 Grains as CaCO3

1080 Grains as CaCO3

Siemens Catalog Number

CW8822CW8901CW8902CW8921CW8904CW8911CW8922CW8950

Barnstead Equiv. Part NumberD8822D8901D8902D8921D8904D8911D8922D8950

149




LEAK DETECTORS

DI-SDI Alert Leak Detector

Specifications

Inlet Power 120V AC – 60 HZ

Power Output 120V, 15 AMP resistive load, and 1/2 HP motor load

Cable Length 12 Feet(Sensor to Alarm Module)

Operational WarningsFor indoor use only!If power to SDI leak detector is interrupted it will not function.If power to SDI leak detector is interrupted and then restored, it will reset.

The DI-SDI Alert is a leak detector and alarm designed to sense deionized water leaks,

initiate an alarm and activate a shut-off valve assembly (not provided).

The device consists of a disk-shaped sensor that rests on the floor near the SDI tank

and a receptacle mounted alarm module with an internal alarm, an external LED

indicator and a 120 VAC grounded power outlet.

In normal operation, the sensor detects no leak and the green LED on the alarm

module remains illuminated and the 120 VAC grounded outlet remains powered.

The alarm condition is initiated when the sensor detects water leakage. The red LED

will be illuminated and the grounded outlet will be de-energized, thus initiating the

feed water shut-off device.

The DI-SDI Alert can be reset by simply shutting off the power to or unplugging the

alarm module.

Features & Benefits

• Provides around-the-clock protection against water damage

• Specially designed to sense small amounts of DI quality water

• Audible alarm, visible LED warning light, reliable power cut-off

• Fully automatic; failsafe operation; no maintenance

150



LEAK DETECTORS

WLD Model 300A Series Water Leak Detector

SPECIFICATIONSDisplay: Four LED indicator lights: one for power, one for alarm condition and two for relay states.Controls: Four push button switches: alarm silence, alarm reset, calibration, and sensor testInputs: Leak detection sensorOutputs: Alarm relay, DPDT (10 A @ 240 VAC) Control relays (2), DPDT (10 A @ 240 VAC) Horn, 108 dBOperating Temperature: 0-50˚COperating Humidity: 0-95% RH non-condensingPower Supply: 120 VAC, 4.6 VA, 60 Hz via internal transformer. Does not include loads on output relays.Enclosure: NEMA 4XDimensions (Overall): 6.5" x 6.5" x 4.0"

The Model WLD 300A is designed to detect leaks of water or other conductive fluids. The WLD 300A is a cost-effective wayto monitor for leaks on or near commercial water treatment systems, or any location where an undetected leak couldcause damage.

The WLD 300A is designed with a number of unique features not normally found in low-cost water detection systems:

SENSITIVE DETECTION SYSTEM

• Designed with a sensitive detection circuit that allows detection of low conductivity fluids such as high purity water.

• An integral test feature allows the user to periodically test the action of the monitor to ensure proper operation.

OUTPUT FUNCTIONS

• 108 dB alarm horn and LED indicators

• Alarm silence and alarm reset push buttons

SENSOR CALIBRATION

• Two sensors may be connected in series for greater coverage

• May be calibrated for local conditions

REMOTE MONITORING VIA MODEM

• Can be interfaced with other products to provide remote

alarm notification via modem

ELECTRICAL CORD OPTION

• One drop cord (with standard three-prong receptacle) for the

load connected to one of the control relays.



ALWLD300A Leak Alarm w/one sensor

ALWLD300AID Leak Alarm w/one sensor

and one drop cord receptacle

ALWLDAS Alarm sensor

151




LIGHTS, QUALITY INDICATOR

5-Range Purity Light

This 5-range purity indicator is ideal for monitoring product water quality from DI and

other ultra-pure water purification systems. It offers 5-convenient

resistivity/conductivity ranges and uses a highly visible LED indicator that changes from

green to red when the product water quality falls below the selected cutoff point.


MaterialsBody . . . . . . . . . . . . Black NorylCap material. . . . . . Clear ABSSensor pins . . . . . . Gold-plated brass

Power . . . . . . . . . . . . . Power pak source: 115 VACPower pak output: 6 VAC

Display. . . . . . . . . . . . . LED (one red & one green)Power cable. . . . . . . . . 10'Electrical connection . . Spade lugs to screw terminalsAccuracy . . . . . . . . . . . ±10% at 25°CRelative humidity . . . . . to 90%Water temperature. . . . +5°C to 45°CPressure . . . . . . . . . . . 0-150 psi

Resistivity/Conductivity RangesJumper Position Set Point

J1 . . . . . . . . . . . . . . 50K ohms-cm (20 µS/cm)J2 . . . . . . . . . . . . . . 200K ohms-cm (5 µS/cm)J3 . . . . . . . . . . . . . . 500K ohms-cm (2 µS/cm)J4 . . . . . . . . . . . . . . 1 megohm-cm (1 µS/cm)no jumper . . . . . . . . 2 megohm-cm (0.5 µS/cm)

DimensionsHeight . . . . . . . . . . . . . 4.5" ± 0.5" from pins to top of capDiameter . . . . . . . . . . . 1.29" ± 0.25"Fittings . . . . . . . . . . . . . 1/2" and 9/16"



ZWDJ05408* 5-Range Light with transformer

ZWDJ05411* 5-Range Light without transformer

ZWDJ05421* Transformer

ZWDJ05422* Remote 5-Range Light with 8' cord and mounting bracket



*Not for use as final quality indicator in hemodialysis applications

152



LIGHTS, QUALITY INDICATOR

Hy-Lite Water Quality Indicator System

Inexpensive water quality indicator system to monitor DI water quality either at the

DI tanks or up to 700 feet away.

Features

• Automatic temperature compensation

• Safe 12 VDC

• Easy 1/2" or 3/4" connections

• Audible alarm option

• Five set points available (25K, 50K, 200K, 1 meg, 2 meg ohm/cm)

• Steady green/flashing red LED display

• Output port for relay and remote alarm modules

ORDERING INFORMATIONCatalog No. Description For Use in Dialysis

ZWDJHLS025K 25K Lite - No audible alarmZWDJHLS050K 50K Lite - No audible alarmZWDJHLS200K 200K Lite - No audible alarmZWDJHLS1MEG 1Meg Lite - No audible alarmZWDJHLS2MEG 2Meg Lite - No audible alarmZWDJHLA025K 25K Lite - Audible alarm*ZWDJHLA050K 50K Lite - Audible alarm*ZWDJHLA200K 200K Lite - Audible alarm*ZWDJHLA1MEG 1Meg Lite - Audible alarm*ZWDJHLA2MEG 2Meg Lite - Audible alarm*ZWDJHYTRANA 115VAC/12VDC TransformerZWDJHYPC Hy-Lite to Hy-Lite PatchcordZWDJRMA Remote Alarm ModuleZWDJRMAR Remote Alarm Module with Auto Re-Alarm*ZWDJRMR Relay ModuleZWDJRPCO50 50 ft. Hy-Lite to Module CableZWDJRPC100 100 ft. Hy-Lite to Module CableZWDJRPC200 200 ft. Hy-Lite to Module Cable

*For dialysis use only, add ZWDJRMAR module for Remote Monitoring

153




LIQUID LEVEL CONTROLS

Tank Level Controls


Pressure Connection . . . . . . . . . 1/4" NPTFElectrical Connection . . . . . . . . . 3 - 7/8" diameter knockoutsSwitches. . . . . . . . . . . . . . . . . . . 3 - SPDT, 15 amp,

125/250/480 VACMounting . . . . . . . . . . . . . . . . . . In fixed position near reservoir

via attached bracket

System DimensionsH x W x D (inches). . . . . . . . . . . 41⁄4x51⁄4x43⁄4

Siemens tank level controllers are designed to control the on/off action of a

water system feeding a storage tank, as well as control the on/off of a booster

pump located at the discharge side of a storage tank. There are a variety of level

controllers available to satisfy a wide array of application needs.

• Each unit comes with three independently adjustable switches that can control

the action of three devices

• Switches are activated by the changing liquid level in the reservoir as sensed by

the units diaphragm sensor.


Catalog Number: ZRLC02003 ZRLC02004 ZRLC02005 ZRLC02006

Diaphragm . . . . . . . . . . . . . . . Buna-N Teflon® Teflon® Buna-NBellow and Connection . . . . . . #380 alloy 316 stainless 316 stainless #380 alloy

aluminum steel steel aluminumAdjustable Range . . . . . . . . . . 0-80" water 0-80" water 0–20 psi 0–20 psi

column columnDeadband. . . . . . . . . . . . . . . . 2.0–6.0" 3–7" water 0.1–0.6 psi 0.1–0.6 psi

water column column

154



METERS (CONDUCTIVITY /RESISTIVITY)

Thornton 200CR(S) Conductivity/ResistivityMeters


Power . . . . . . . . . . . . . . . . . . . 90-130 VAC or 180-250 VAC to 24 VDC; 12 W max; 50/60 Hz

Operating Temp.. . . . . . . . . . . –10 to 55°C (14 to 131°F)Humidity . . . . . . . . . . . . . . . . . 0-95% RH (non-condensing)Ranges. . . . . . . . . . . . . . . . . . High-purity – 0.1 constant cell

0.02 µS/cm to 750 µS/cm0.0013 mΩ-cm to 50 MΩ-cmTDS: 0-62.5 k ppm (as NaCl)Temperature: -40°C to 140°C

Accuracy . . . . . . . . . . . . . . . . ±0.5% of reading up to 18 Magohm-cmRepeatability . . . . . . . . . . . . . ±0.1% for resistance and ±0.075°C for temperatureTemp. Accuracy . . . . . . . . . . . ±0.25°C of readingRelays . . . . . . . . . . . . . . . . . . 2 SPDT relays, each rated for max of 5 amp up to

30VDC or 250 VAC; 4 solid state, each rated formax 1.5 amp, 250 VAC 50mA min current

Display . . . . . . . . . . . . . . . . . . 1 line, 16 character backlit LCD (4.8mm x 9.6mm)Enclosure . . . . . . . . . . . . . . . . ABS-PC alloy; panel cut required 3.78 x 7.56" DINWeight . . . . . . . . . . . . . . . . . . 1.9 lb (0.9 kg)Keypad . . . . . . . . . . . . . . . . . . 11 tactile feedback keysSetpoints . . . . . . . . . . . . . . . . 4 controlled setpoints can be set as low or high limit. Any

setpoint can be programmed to operate up to 4 output relays.

MeasurementUpdate Rate . . . . . . . . . . . . . . Once per secondTwo Analog. . . . . . . . . . . . . . . Output value is proportioned to the selected Output Signals measurement signal. Outputs scaled from 4-20 mA;

500 ohm load max.Analog Output Accuracy . . . . 0.01 mASerial Output . . . . . . . . . . . . . RS232/max distance 500 ft; RS422/max distance 4K ft. Field

selectable up to 19.2 k band.

Sensor Patch CordLength . . . . . . . . . . . . . . . . . . Max. distance sensor to meter is 200 ft. Patch cord is required

for each sensor.Temp.Compensation . . . . . . . Automatic, reference to 25°C for resistivity, conductivity,

percent rejection and TDS.

ORDERING INFORMATIONModel 200CR - Two channel monitoring

Model 200 CRS - Single channel monitoringCatalog No.

200CR Res/Con Meter 115VAC . . . . . . . . . . . . ZMET62201200CR Meter w/4-20 mA 115VAC . . . . . . . . . . . ZMET62221200CR Meter w/4 SS Relays & 4-20 mA 115VAC ZMET62421200CRS Meter w/2 Relays & 4-20 mA 115VAC ZMET61221200CRS Package (w/Cord & Sensor) . . . . . . . . ZPAK580211220.1C Sensor 200 CR

Titanium/Ryton (1.35") 3/4" NPT . . . . . . . . . . ZCEL240201Titanium/Ryton (5.19") 3/4" NPT . . . . . . . . . . ZCEL240202Monel/Ryton (1.35") 3/4" NPT . . . . . . . . . . . . ZCEL240203Monel/Ryton (5.19") 3/4" NPT . . . . . . . . . . . . ZCEL240204Titanium/PEEK (1.35) 3/4" NPT Ozone . . . . . ZCEL240205Titanium/PEEK (5.19") 3/4" NPT Ozone . . . . ZCEL240206Titanium/Noryl (1.14" insertion length) 1/2" NPT ZCEL240213Titanium/Noryl (1.14" insertion length) 3/4" NPT ZCEL240214Titanium/PEEK 1.5" Tri-clamp . . . . . . . . . . . . ZCEL243201316LSS/PEEK 1.5" Tri-clamp Pharm. . . . . . . ZCEL243203Titanium/PEEK 2" Tri-clamp. . . . . . . . . . . . . . ZCEL243205316LSS/PEEK 2" Tri-clamp . . . . . . . . . . . . . . ZCEL243207

200CR(S) Patch Cord 1' . . . . . . . . . . . . . . . . . . ZCOR100166200CR(S) Patch Cord 5' . . . . . . . . . . . . . . . . . . ZCOR100566200CR(S) Patch Cord 10' . . . . . . . . . . . . . . . . . ZCOR101066200CR(S) Patch Cord 25' . . . . . . . . . . . . . . . . . ZCOR102566200CR(S) Patch Cord 50' . . . . . . . . . . . . . . . . . ZCOR105066200CR(S) Patch Cord 100' . . . . . . . . . . . . . . . . ZCOR111066200CR(S) Patch Cord 150' . . . . . . . . . . . . . . . . ZCOR111566200CR(S) Patch Cord 200' . . . . . . . . . . . . . . . . ZCOR112066NEMA rear enclosure . . . . . . . . . . . . . . . . . . . . P92470Pipe mounting bracket. . . . . . . . . . . . . . . . . . . . ZAC100063800 Series instrument adapter plate . . . . . . . . . ZAC100064High res/low cond calib kit (calib #1 & #2) . . . . ZCAL186501Low res/high cond calib kit (calib #3 & #4) . . . . ZCAL186502Complete calibration kit (contains all 4 calibrators) ZCAL186503Individual calibrator #1–4 Mohm/104°C . . . . . . ZCAL186401Individual calibrator #2–100,000 Ohm/0°C . . . . ZCAL186402Individual calibrator #3–20,000 Ohm/104°C . . . ZCAL186403Individual calibrator #4–1,000 Ohm/0°C . . . . . . ZCAL18640418.18MW-cm @ 25°C Verifier . . . . . . . . . . . . . . ZCAL186504

The Thornton 200CR and 200CRS are flexible meters allowing the user toconfigure the instrument to measure in the engineering units preferred by theoperator. An operator no longer needs to use one model for conductivity andanother for resistivity, percent rejection (200CR) or a specific range ofmeasurement.

• Measures conductivity (1 S/cm to 0.02 µS/cm), resistivity (1.0Ω-cm to 50.0MΩ-cm), Temperature (–10 to 140°C and/or +14 to 284°F), TDS, (ppm/ppb), Percentrejection (0-99%), Difference (A–B, B–A), Ratio (A/B, B/A), % chemicalconcentration for HCl, H2SO4, NaOH. Each of two channels can be set up tomeasure two of these parameters. A total of four different measurements canbe programmed.

• Wide measurement range; Backlit LCD display

• NEMA 4X housing and cable connectors. 200 foot sensor cable per channel

• Designed to meet CDS/NRTL standards, calibration with NIST traceability

155




METERS (TOTAL ORGANIC CARBON)

Thornton Total Organic Carbon System

The Thornton Total Organic Carbon (TOC) system is comprised of the 770MAX

multi parameter analyzer transmitter and the 5000TOC Sensor. The sensor /

analyzer uses proven ultraviolet oxidation with differential conductivity to

effectively measure TOC concentrations. The smart sensor design minimizes set-

up time to just minutes while the continuous flow design provides rapid TOC

response which are far superior then traditional batch measurement systems.

Benefits:

• No gases or reagents to handle, store or replace. No moving parts minimize

routine maintenance and service intervals.

• Sensor concept allows easy and economical integration into water purification

make-up and distribution systems.

• Easily added to existing APEX™ or PreVUE® systems which currently use

770MAX controller

• Meets USP <643>, <645> and EP 2.2.44 requirements for Pharmaceutical

Industry

• Ultra low TOC detection (< 1 ppb) for UPW water applications to continuously

monitor critical organic levels in semiconductor make-up, distribution and

process systems

• Compact, sealed NEMA 4 enclosure for demanding industrial environments

• 770MAX can accommodate additional sensor measurements for a total of 6

sensors including conductivity / resistivity TOC, temperature, flow, pH, DO, ORP,

and ozone.


Measurement Range 0.05 -1000 (ppb C) Repeatability + 0.05 ppb C < 5 ppb + 1.0% > 5 ppbAccuracy +0.1 ppb C for TOCResolution 0.001 ppb CAnalysis Time ContinuousResponse Time < 60 secondsLimit of Detection 0.025 ppb CConductivity Cell Constant Accuracy +2%Temperature Sensor Pt1000 RTD, Class ATemperature Accuracy +0.25˚C @ 25˚C

SAMPLE WATER REQUIREMENTS

Temperature - 0 to 90˚CParticle Size - 100 micronMinimum Water Quality – 0.5 M-Ohm (2.0 vS/cm) Flow Rate – 20mL/minPressure – 15 to 100 psig at sample inlet connection

GENERAL SPECIFICATIONS

Overall Dimensions – 11" W x 7.4" H x 5.25" DSample Connections – Inlet 0.125" (3mm) O.D. compression-type (femule)

tube connection with 0.25 adapter Outlet 0.25" (6mm) O.D. Barb connection



ZPAK58036013 StandardThornton TOC system, 110V (includes 5000TOC Sensor, 770MAX Analyzer /Transmitter, and 25" patch cord)

Z5TOC58079510 Replacement UV Lamp

Pharmaceutical OptionsZ5TOC58091534 System Suitability/Calibration Test kit

Z5TOC58091526 System Suitability Standards*

Z5TOC58091529 Calibration Standards * (500 ppb & 250 ppb)

Z5TOC58091527 Validation Support Documents

* perishable – max 4-week shelf life

156



MULTIMEDIA FILTERS

AVGF® Gravity FiltersFlow Rates from 14 to 1,472 gpm

AVGF® Gravity Filters operate automatically without a single valve, backwash pump,flow control or other instrumentation. Nothing moves but the water. The designand performance of the AVGF® filter has been proven through years of continuoususe at hundreds of water treatment facilities worldwide. Widely used inpretreatment plants for boiler feedwater, generating stations, pulp and paper millsand chemical plants, the AVGF® filter is also approved by a majority of states fortreatment of potable water supplies.

• For process water, potable water, iron removal and cooling tower sidestreams

• Requiring little labor or maintenance, the AVGF® filter operates by itself – filtering,backwashing, rinsing and returning to service without the use of valves, timers orswitches

• Unique design, including the discharge of filtered water above the filter bed,results in consistent high-quality effluent water

• The AVGF® filter rinse water is not discharged to drain, but stored and used forthe next backwash cycle to save water

ORDERING INFORMATIONFor Permutit® products and information contact 908.704.9027.


Model Number AVGF-3 AVGF-4 AVGF-5 AVGF-6 AVGF-7 AVGF-8 AVGF-9 AVGF-10 AVGF-11Flow Rate

2 gpm/sq. feet . . . . . . . . . . . . 14 gpm 25 gpm 39 gpm 56 gpm 77 gpm 100 gpm 127 gpm 157 gpm 190 gpm3 gpm/sq. feet. . . . . . . . . . . . 21 gpm 38 gpm 59 gpm 85 gpm 115 gpm 151 gpm 191 gpm 236 gpm 285 gpm

Wash Water Flow Rate. . . . . . . 147 gpm 263 gpm 412 gpm 594 gpm 809 gpm 1,056 gpm 1,336 gpm 1,649 gpm 1,995 gpm

System DimensionsFilter Tank Diameter (feet) . . . . 3' 4' 5' 6' 7' 8' 9' 10' 11'. . . . . . . . . . . . . . . . . . . . . . . . . Remaining dimensions vary depending on type and tank diameter. Please request a product specification sheet for dimensions, . . . . . . . . . . . . . . . . . . . . . . . . . overall height is 252".

Pipe SizeInlet/Outlet . . . . . . . . . . . . . . . . 2" 2-1/2" 3" 4" 4" 6" 6" 6" 8"Drain . . . . . . . . . . . . . . . . . . . . . 6" 8" 8" 10" 10" 12" 12" 14" 14"

Shipping WeightIndustrial lb. . . . . . . . . . . . . 2,600 3,500 4,400 5,400 6,300 7,300 8,500 9,700 11,200

kg . . . . . . . . . . . . 1,179 1,588 1,996 2,449 2,858 3,311 3,856 4,400 5,080Municipal lb. . . . . . . . . . . . . 3,400 4,200 5,400 6,500 7,500 9,000 10,400 11,500 14,100

kg . . . . . . . . . . . . 1,542 1,905 2,450 2,948 3,402 4,082 4,717 5,216 16,396


Model Number AVGF-12 AVGF-13 AVGF-14 AVGF-15 AVGF-16 AVGF-18 AVGF-20 AVGF-22 AVGF-25Flow Rate

2 gpm/sq. feet . . . . . . . . . . . . 226 gpm 265 gpm 308 gpm 353 gpm 402 gpm 509 gpm 629 gpm 760 gpm 982 gpm3 gpm/sq. feet. . . . . . . . . . . . 339 gpm 398 gpm 462 gpm 530 gpm 603 gpm 763 gpm 943 gpm 1,140 gpm 1,472 gpmWash Water Flow Rate . . . . . 2,373 gpm 2,787 gpm 3,232 gpm 3,711 gpm 4,223 gpm 5,345 gpm 6,598 gpm 7,982 gpm 10,300 gpm

System DimensionsFilter Tank Diameter (feet) . . . . 12' 13' 14' 15' 16' 18' 20' 22' 25'. . . . . . . . . . . . . . . . . . . . . . . . . Remaining dimensions vary depending on type and tank diameter. Please request a product specification sheet for dimensions, . . . . . . . . . . . . . . . . . . . . . . . . . overall height is 252".

Pipe SizeInlet/Outlet . . . . . . . . . . . . . . . . 8" 8" 8" 10" 10" 10" 12" 12" 14"Drain . . . . . . . . . . . . . . . . . . . . . 14" 15" 16" 18" 18" 20" 24" 24" 30"

Shipping WeightIndustrial lb. . . . . . . . . . . . . 12,200 13,700 15,100 16,100 17,300 21,200 25,200 29,000 34,500

kg . . . . . . . . . . . . 5,534 6,214 6,849 7,303 7,847 9,616 11,430 13,154 15,550Municipal lb. . . . . . . . . . . . . 15,600 17,400 19,700 22,300 25,000 30,100 34,800 41,500 48,300

kg . . . . . . . . . . . . 7,076 7,893 8,936 10,124 11,340 13,653 17,237 18,825 21,908

157




MULTIMEDIA FILTERS

KF Series Multimedia FiltersFlow Rates from 1 to 70 gpm

KF Series Multimedia Filters are ideal for commercial and light industrial filtration

applications where the advantages of a lightweight, corrosion-resistant FRP pressure

vessel and cost-effective top mounted valve are desirable.

• Tank liners are blow molded plastic wrapped with high-strength epoxy resin and

fiberglass for worry-free service

• Includes a motorized control valve that is quiet, efficient and dependable

• Electromechanical timer allows automatic backwash

• Includes a pretreatment lock-out switch assembly to deactivate downstream equipment

during backwash

Requires field assembly.


Series KFZMS

APPLICATIONSTank Size Pipe Commercial RO-Feed* Backwash Media Dimensions Shipping WeightD x H (in) Size (in) Service Flow Service Flow Flow Volume (ft3) LxDxH (in) lb (kg)

10x40 1.0 5 gpm 4 gpm 8 gpm 1.0 10x10x50 160 (73)12x52 1.0, 1.5 8 gpm 6.4 gpm 12 gpm 1.6 12x12x63 320 (146)14x65 1.0, 1.5 10 gpm 8 gpm 15 gpm 2.1 14x14x76 469 (213)16x65 1.0, 1.5 14 gpm 11.2 gpm 20 gpm 2.9 16x16x76 630 (286)18x65 1.0, 1.5 18 gpm 14.4 gpm 25 gpm 4.0 18x18x75 670 (304)21x62 1.5, 2.0 24 gpm 19.2 gpm 35 gpm 4.9 21x21x74 1110 (504)24x72 1.5, 2.0 32 gpm 25.6 gpm 45 gpm 6.9 24x24x90 1500 (681)30x72 2.0 49 gpm 39.2 gpm 70 gpm 10.0 30x30x96 1570 (713)36x72 2.0 70 gpm 56 gpm 100 gpm 14.5 36x36x97 2130 (967)

*Flow is based on 8 gpm/ft2


Catalog Number: KFZMS XXX F X Z F X X

System Name . . . . . . . . . . . KFZMS 010, 012, 014,016, 018, 021,

Pressure Vessel Diameter (in inches) . . . . . . . . . . 024, 030, 036Pressure Vessel Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .F = non-code, fiberglassControl Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X = Std NEMA 3R equivalentLevel of Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Z = Stand alone A= 1.0"Backwash/Regeneration Initiation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F = Timeclock NEMA3R (equivalent) B = 1.5" X = NoInlet/Outlet Pipe Size† . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .C = 2.0"

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Options

To determine your catalog order number, replace the X with one of the numbered options below it.

These filters are also available as duplex units. Please contact our Technical Support team for more information.†All sizes not available with every tank size.


158



SYSTEM SPECIFICATIONSModel Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . VPEF/VPAF-024 VPEF/VPAF-630 VPEF/VPAF-636 VPEF/VPAF-742Flow Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Good. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 70 105 140Better. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 60 85 115Best. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 40 55 75

Backwash Flow Rate. . . . . . . . . . . . . . . . . . . . . . . . 47 74 106 144Media (cubic feet)* . . . . . . . . . . . . . . . . . . . . . . . . . . 7.8 13.3 17.7 24.0System Dimensions**Pipe Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1/2” 2” 2-1/2” 2-1/2”Column Size (D x H) . . . . . . . . . . . . . . . . . . . . . . . .

inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24x48 30x60 36x60 42 x 72cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61x122 77x153 92x153 107x183

**H x W x D Simplex (Duplex) – inch . . . . . . . . . . 76x42x41 (80x97x41) 90x42x48 (94x97x48) 96x40x55 (97x97x57) 112x43x60 (116x133x60)**H x W x D Simplex (Duplex) –cm . . . . . . . . . . . 193x107x104 (204x246x104) 229x107x123 (239x246x122) 244x102x140 (247x246x145) 285x109x152 (295x338x152)Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . .

lb. – Simplex (Duplex) . . . . . . . . . . . . . . . . . . . . . 1,530 (3,060) 2,240 (4,480) 3,410 (6,820) 4,820 (9,640)kg – Simplex (Duplex) . . . . . . . . . . . . . . . . . . . . . 694 (1,388) 1,017 (2,033) 1,547 (3,094) 2,186 (4,372)

Operating Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . lb. – Simplex (Duplex) . . . . . . . . . . . . . . . . . . . . . 2,330 (4,660) 3,500 (7,000) 5,600 (11,200) 7,800 (15,600)kg – Simplex (Duplex) . . . . . . . . . . . . . . . . . . . . . 1,057 (2,114) 1,588 (3,176) 2,541 (5,081) 3,538 (7,076)

Electrical Requirements. . . . . . . . . . . . . . . . . . . . . . 110 V / 60 Hz / 1 ph / 3 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Model Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . VPEF/VPAF-648 VPEF/VPAF-754 VPEF/VPAF-760 VPEF/VPAF-772Flow Rates . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Good. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185 235 290 420Better. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 190 230 335Best. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 125 150 225

Backwash Flow Rate. . . . . . . . . . . . . . . . . . . . . . . . 188 239 295 424Media (cubic feet)* . . . . . . . . . . . . . . . . . . . . . . . . . . 31.4 39.8 49.1 70.6System Dimensions**Pipe Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3” 3” 4” 4”Column Size (D x H) . . . . . . . . . . . . . . . . . . . . . . . .

inch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48x60 54x72 60x72 72x72cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122x153 139x183 153x183 183x183

H x W x D Simplex (Duplex) – inch . . . . . . . . . . . 106x58x67 (106x133x67) 121x61x75 (123x158x75) 125x68x88 (127x158x88) 125x68x88 (131x158x100)H x W x D Simplex (Duplex) –cm . . . . . . . . . . . . . 269x147x170 (269x338x170) 307x155x191 (312x401x191) 318x173x224 (323x401x224) 318x173x224 (333x401x254)Shipping Weight

lb. (kg) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6,200 (12,400) 8,300 (16,600) 10,435 (20,870) 14,980 (29,960)kg – Simplex (Duplex) . . . . . . . . . . . . . . . . . . . . . 2,813 (5,625) 3,765 (7,530) 4,733 (9,466) 6,795 (13,590)

Operating Weightlb. – Simplex (Duplex) . . . . . . . . . . . . . . . . . . . . . 10,160 (20,320) 13,320 (26,640) 16,765 (33,530) 24,110 (48,220)kg – Simplex (Duplex) . . . . . . . . . . . . . . . . . . . . . 4,609 (9,217) 6,042 (12,084) 7,604 (15,208) 10,936 (21,872)

Electrical Requirements. . . . . . . . . . . . . . . . . . . . 110 V / 60 Hz / 1 ph / 3 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

*Filtration media includes 18" of Anthracite (0.85-0.95 mm), 8" of Filter Sand (0.45-0.55 mm) and 4" of Garnet (0.3 mm).**Approximate

ORDERING INFORMATIONVP Series Multimedia Filters have extensive option packages. For ordering instructions, or additional product information, please contact technical support at 800.875.7873 extension 5000.

MULTIMEDIA FILTERS

VP Series Multimedia FiltersFlow Rates from 25 to 420 gpm

VP Series Multimedia Filters are a low cost, reliable and efficient way to purify water.

These rugged, pre-engineered, pre-assembled units minimize installation and start-

up costs and are ideal for boiler feed, process water or rinse water applications.

• VPEF denotes non-ASME code vessels offered with express delivery

• VPAF denotes ASME code vessels with stamp available



• Structural steel legs (seismic zone 4) provide rigid support of vessel for safety

• Skid mount (seismic zone 4) with structural steel beams for duplex systems



• Standard epoxy internal and external coating extends vessel life

• Schedule 80 PVC piping enhances corrosion-resistance


PUMPS, CENTRIFUGAL

Multiple Stage Centrifugal Booster PumpsVictaulic® Type Pumps

SPECIFICATIONS – please contact Technical Support to obtain pump curvesMODEL NUMBER CRN3-3 CRN3-4 CRN3-5 CRN3-7 CRN3-8 CRN3-10

Catalog Number . . . . . . . . . . . . . . . . . GPC96083742 GPC96083744 GPC96083746 GPC96083750 GPC96083752 GPC96083756Nominal Flow Rate (gpm) . . . . . . . . . . 15 @ 35 psi 15 @ 39 psi 15 @ 52 psi 15 @ 71 psi 15 @ 95 psi 15 @ 104 psiPump Efficiency . . . . . . . . . . . . . . . . . 58% 58% 58% 58% 58% 58%Max Discharge Head (psi) . . . . . . . . . 41 54 69 95 108 136Max Oper Pressure (psi) . . . . . . . . . . 360 psi 360 psi 360 psi 360 psi 360 psi 360 psiMin Continuous Flow (gpm) . . . . . . . . 1.5 1.5 1.5 1.5 1.5 1.5Nameplate Horsepower . . . . . . . . . . . 0.5 HP 0.75 HP 0.75 HP 1.5 HP 1.5 HP 2.0 HPMotor Type/Service Factor . . . . . . . . . TEFC TEFC TEFC TEFC TEFC TEFCShipping Weight (lb) . . . . . . . . . . . . . . 50.5 48.4 48.9 63.5 66.3 73Electrical Requirements . . . . . . . . . . . 208-230/460 V, 3 phase, 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pump Configuration . . . . . . . . . . . . . . Vertical, multiple stage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Materials of Construction . . . . . . . . . . 316 stainless steel with mechanical silicon carbide seal faces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inlet/Outlet . . . . . . . . . . . . . . . . . . . . . 1-1/4-inch Victaulic type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MODEL NUMBER CRN5-3 CRN5-5 CRN5-6 CRN5-7 CRN5-8 CRN5-10

Catalog Number . . . . . . . . . . . . . . . . . GPC96084823 GPC96084827 GPC96084829 GPC96084831 GPC96084833 GPC96084837Nominal Flow Rate (gpm) . . . . . . . . . . 30 @ 28 psi 30 @ 52 psi 30 @ 63 psi 30 @ 74 psi 30 @ 82 psi 30 @ 106 psiPump Efficiency . . . . . . . . . . . . . . . . . 65% 65% 65% 65% 65% 65%Max Discharge Head (psi) . . . . . . . . . 41 69 84 97 113 141Max Oper Pressure (psi) . . . . . . . . . . 360 psi 360 psi 360 psi 360 psi 360 psi 360 psiMin Continuous Flow (gpm) . . . . . . . . 3 3 3 3 3 3Nameplate Horsepower . . . . . . . . . . . 1 HP 1.5 HP 2 HP 3 HP 3 HP 3 HPMotor Type/Service Factor . . . . . . . . . TEFC TEFC TEFC TEFC TEFC TEFCShipping Weight (lb) . . . . . . . . . . . . . . 50.5 65.9 71.9 91.2 92.8 94.6Electrical Requirements . . . . . . . . . . . 208-230/460 V, 3 phase, 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pump Configuration . . . . . . . . . . . . . . Vertical, multiple stage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Materials of Construction . . . . . . . . . . 316 stainless steel with mechanical silicon carbide seal faces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inlet/Outlet . . . . . . . . . . . . . . . . . . . . . 1-1/4-inch Victaulic type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MODEL NUMBER CRN10-2 CRN10-3 CRN10-4 CRN10-5 CRN15-3 CRN15-4 CRN15-6 CRN15-7

Catalog Number GPC96523104 GPC96523105 GPC96523106 GPC96523255 GPC96523707 GPC96523708 GPC96523710 GPC96523711Rated Flow (gpm) 53 @ 31 psi 53 @ 49 psi 53 @ 65 psi 53 @ 83 psi 90 @ 66 psi 90 @ 89 psi 90 @ 130 psi 90 @ 156 psiPump Efficiency 70% 70% 70% 70% 70% 70% 70% 70%Max Discharge Head (psi) 40 65 85 105 85 105 170 195Max Oper Pressure (psi) 360 psi 360 psi 360 psi 360 psi 360 psi 360 psi 360 psi 360 psiMin Continuous Flow (gpm) 5.5 5.5 5.5 5.5 8.5 8.5 8.5 8.5Nameplate Horsepower 1.5 HP 3 HP 3 HP 5 HP 5 HP 7.5 HP 10 HP 15 HPMotor Type/Service Factor TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15Shipping Weight (lb) 101 139 141 164 159 184 223 278Electrical Requirements . . . . . . . . . . . 208-230/460 V, 3 phase, 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pump Configuration . . . . . . . . . . . . . . Vertical, multiple stage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Materials of Construction . . . . . . . . . . 316 stainless steel with mechanical silicon carbide seal faces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inlet/Outlet Victaulic Style. . . . . . . . . . 2-inch Victaulic type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Vertical, multi-stage centrifugal pumps are designed with the motor mounted directly on topof the pump housing to minimize footprint. Pump suction/discharge chamber, impellers,pump shaft, diffuser chambers, outer discharge sleeve, and impeller seal ring retainers areconstructed of 316 stainless steel. The motor stool is constructed of cast iron and is isolatedfrom the process fluid by a 316 stainless steel insert. Each pump is equipped with a hightemperature mechanical seal assembly. Pumps are capable of operating at continuoustemperatures up to 250°F (121°C). The pump motor is sized to ensure non-overloading whenoperating on the pump curve. Motors are totally enclosed fan cooled (TEFC), with NEMA Cface designs that provide a minimum service factor of 1.15. Lower motor bearings areadequately sized to ensure long motor life.


Victaulic Sets Size Catalog No.

Victaulic Connector Set Available 1-1/4" P90348Victaulic Connector Set Available 2" P90349

High Capacity Pumps available. Call Technical Support.

159




160



PUMPS, CENTRIFUGAL

Multiple Stage Centrifugal Booster PumpsANSI Flange


Catalog Number . . . . . . . . . . . . . . . . . GPC96083922 GPC96083924 GPC96083926 GPC96083930 GPC96083932 GPC96083936Nominal Flow Rate (gpm) . . . . . . . . . . 15 @ 35 psi 15 @ 39 psi 15 @ 52 psi 15 @ 71 psi 15 @ 95 psi 15 @ 104 psiPump Efficiency . . . . . . . . . . . . . . . . . 58% 58% 58% 58% 58% 58%Max Discharge Head (psi) . . . . . . . . . 41 54 69 95 108 136Max Oper Pressure (psi) . . . . . . . . . . 360 psi 360 psi 360 psi 360 psi 360 psi 360 psiMin Continuous Flow (gpm) . . . . . . . . 1.5 1.5 1.5 1.5 1.5 1.5Nameplate Horsepower . . . . . . . . . . . 0.5 HP 0.75 HP 0.75 HP 1.5 HP 1.5 HP 2.0 HPMotor Type/Service Factor . . . . . . . . . TEFC TEFC TEFC TEFC TEFC TEFCShipping Weight (lb) . . . . . . . . . . . . . . 58.4 56.3 56.9 72.5 75.4 80.9Electrical Requirements . . . . . . . . . . . 208-230/460 V, 3 phase, 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pump Configuration . . . . . . . . . . . . . . Vertical, multiple stage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Materials of Construction . . . . . . . . . . 316 stainless steel with mechanical silicon carbide seal faces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inlet/Outlet . . . . . . . . . . . . . . . . . . . . . 1-1/4-inch ANSI Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .


Catalog Number . . . . . . . . . . . . . . . . . GPC96085013 GPC96085017 GPC96085019 GPC96085021 GPC96085023 GPC96085027Nominal Flow Rate (gpm) . . . . . . . . . . 30 @ 28 psi 30 @ 52 psi 30 @ 63 psi 30 @ 74 psi 30 @ 82 psi 30 @ 106 psiPump Efficiency . . . . . . . . . . . . . . . . . 65% 65% 65% 65% 65% 65%Max Discharge Head (psi) . . . . . . . . . 41 69 84 97 113 141Max Oper Pressure (psi) . . . . . . . . . . 360 psi 360 psi 360 psi 360 psi 360 psi 360 psiMin Continuous Flow (gpm) . . . . . . . . 3 3 3 3 3 3Nameplate Horsepower . . . . . . . . . . . 1 HP 1.5 HP 2 HP 3 HP 3 HP 3 HPMotor Type/Service Factor . . . . . . . . . TEFC TEFC TEFC TEFC TEFC TEFCShipping Weight (lb) . . . . . . . . . . . . . . 58.4 74.9 79.8 99.1 100.7 102.5Electrical Requirements . . . . . . . . . . . 208-230/460 V, 3 phase, 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pump Configuration . . . . . . . . . . . . . . Vertical, multiple stage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Materials of Construction . . . . . . . . . . 316 stainless steel with mechanical silicon carbide seal faces. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inlet/Outlet . . . . . . . . . . . . . . . . . . . . . 1-1/4-inch ANSI Flange . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

MODEL NUMBER CRN10-2 CRN10-3 CRN10-4 CRN10-5 CRN15-3 CRN15-4 CRN15-6 CRN15-7

Catalog Number GPC96523118 GPC96523119 GPC96523120 GPC96523265 GPC96523718 GPC96523719 GPC96523721 GPC96523722Rated Flow (gpm) 53 @ 31 psi 53 @ 49 psi 53 @ 65 psi 53 @ 83 psi 90 @ 66 psi 90 @ 89 psi 90 @ 130 psi 90 @ 156 psiPump Efficiency 70% 70% 70% 70% 70% 70% 70% 70%Max Discharge Head (psi) 40 65 85 105 85 105 170 195Max Oper Pressure (psi) 360 psi 360 psi 360 psi 360 psi 360 psi 360 psi 360 psi 360 psiMin Continuous Flow (gpm) 5.5 5.5 5.5 5.5 8.5 8.5 8.5 8.5Nameplate Horsepower 1.5 HP 3 HP 3 HP 5 HP 5 HP 7.5 HP 10 HP 10 HPMotor Type/Service Factor TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15Shipping Weight (lb) 110 150 152 175 170 194 234 370Electrical Requirements . . . . . . . . . . . 208-230/460 V, 3 phase, 60 Hz. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pump Configuration . . . . . . . . . . . . . . Vertical, multiple stage. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Materials of Construction . . . . . . . . . . 316 stainless steel with cast iron flange and base plate* and mechanical silicon carbide seal faces . . . . . . . . . . Inlet/Outlet . . . . . . . . . . . . . . . . . . . . . 2-inch ANSI Flange type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

*Cast iron flange and base plate does not come in contact with pumped liquid. High Capacity Pumps available. Call Technical Support.

Vertical, multi-stage centrifugal pumps are designed with the motor mounted directly ontop of the pump housing to minimize footprint. Pump suction/discharge chamber,impellers, pump shaft, diffuser chambers, outer discharge sleeve, and impeller seal ringretainers are constructed of 316 stainless steel. The motor stool and flanges areconstructed of cast iron and are isolated from the process fluid by 316 stainless steelinserts. Each pump is equipped with a high temperature mechanical seal assembly.Pumps are capable of operating at continuous temperatures up to 250°F (121°C). Thepump motor is sized to ensure non-overloading when operating on the pump curve.Motors are totally enclosed fan cooled (TEFC), with NEMA C face designs that provide aminimum service factor of 1.15. Lower motor bearings are adequately sized to ensurelong motor life.

161




PUMPS, FEEDWATER BOOSTER

Feedwater Booster Pumps

Siemens feedwater booster pumps are close-coupled, single stage, end suction design

capable of being serviced without disturbing piping connections. The pump casings are

self venting, with a center line discharge design, and are fabricated of 304 stainless

steel casing seal ring. The enclosed-type impeller is constructed of 304 stainless steel. It

is dynamically balanced, keyed to the steel shaft and secured by a 304 stainless steel

capscrew.

The liquid cavity is sealed off at the pump shaft by an internally flushed mechanical seal

with stainless steel metal parts, Buna-N elastomers and carbon to ceramic faces,

suitable for continuous operation at 225°F. A replaceable, aluminum-bronze, shaft-

sleeve completely covers the wetted area under the seal. Pumps are rated for 125 psi

(175 psi for Series 3531 Pumps) working pressure. All casings have a drain tapping.

Pump motors meet NEMA specifications, are totally enclosed fan cooled (TEFC), have

heavy-duty grease-lubricated ball bearings, and are sized to be non-overloading over the

entire pump range.

SPECIFICATIONS*3530 Series/MODEL NUMBER 3530-30-2 3530-30-3 3530-30-9 3530 3530-30-2 3530-30-3 3530-30-9

Catalog Number . . . . . . . . . . . . . . . . . PF1CB6NA4 PF1DB6NG4 PF1ED6NC4 PF3AB6NA4 PF3CB6NA4 PF3DB6NG4 PF3ED6NC4Design Capacity (gpm). . . . . . . . . . . . 27 @ 25 psid 35 @ 35 psid 76 @ 25 psid 5 @ 25 psid 27 @ 25 psid 35 @ 35 psid 76 @ 25 psidPump Efficiency . . . . . . . . . . . . . . . . . 52% 53% 61% 40% 52% 53% 61%Motor Horsepower . . . . . . . . . . . . . . . 1.0 HP 1.5 HP 2.0 HP 0.5 HP 1.0 HP 1.5 HP 2.0 HPMotor Type/Service Factor . . . . . . . . . TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15 TEFC/1.15Electrical Requirements . . . . . . . . . . . 115/230V 115/230V 230/460V 230/460V 230/460V 230/460V 230/460V

16/8A; 1ph 20/20A; 1ph 12A; 3ph 24/12A; 3ph 3.6/1.8A; 3ph 5.2/2.6A; 3ph 6.8/3.4A; 3phPower at Full Load (KW) . . . . . . . . . . 0.83 1.2 1.6 1.6 0.83 1.2 1.6Pump Configuration . . . . . . . . . . . . . . Horizontal, closed-coupled. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Materials of Construction . . . . . . . . . . 304 stainless steel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Inlet. . . . . . . . . . . . . . . . . . . . . . . . . . . 11⁄4" NPTF 11⁄4" NPTF 11⁄2" NPTF 11⁄2" NPTF 11⁄4" NPTF 11⁄4" NPTF 11⁄2" NPTFOutlet . . . . . . . . . . . . . . . . . . . . . . . . . 1" NPTF 1" NPTF 11⁄4" NPTF 11⁄4" NPTF 1" NPTF 1" NPTF 11⁄4" NPTFDimensions (WxLxH) inches . . . . . . . 10.5x18.5x9 10.5x18.5x9 10.5x18.5x9 10.5x18.5x9 10.5x18.5x9 10.5x18.5x9 10.5x18.5x9Shipping Weight (lb) . . . . . . . . . . . . . . 41 45 45 37 41 45 45

3531 Series/MODEL NUMBER 1.25x1.5x5 1.5x2x5 2x2.5x5

Catalog Number . . . . . . . . . . . . . . . . . PF3GD5NE4 PF3HE5NE4 PF3IF5FC4Design Capacity (gpm). . . . . . . . . . . . 135 @ 35 psid 200 @ 30 psid 290 @ 35 psidPump Efficiency . . . . . . . . . . . . . . . . . 61% 59% 68%Motor Horsepower . . . . . . . . . . . . . . . 5.0 HP 7.5 HP 10.0 HPMotor Type/Service Factor . . . . . . . . . TEFC/1.15 TEFC/1.15 TEFC/1.15Electrical Requirements . . . . . . . . . . . 230/460V 230/460V 230/460V

15.2/7.6A; 3 ph 22/11A; 3 ph 28/14A; 3 phPower at Full Load (KW) . . . . . . . . . . 3.5 5.1 6.4Pump Configuration . . . . . . . . . . . . . . Horizontal, closed-coupled . . . . . . . . . . . . . Materials of Construction . . . . . . . . . . 304 stainless steel . . . . . . . . . . . . . . . . . . . . Inlet. . . . . . . . . . . . . . . . . . . . . . . . . . . 11⁄2" NPTF 2" NPTF 21⁄2" 150# flangeOutlet . . . . . . . . . . . . . . . . . . . . . . . . . 11⁄4" NPTF 11⁄2" NPTF 2" 150# flangeDimensions (WxLxH) inches . . . . 12x23x11 15x24x12 15x25x12Shipping Weight (lb) . . . . . . . . . . . . . . 101 130 175

*Please contact Technical Support to obtain pump curves

162



REVERSE OSMOSIS MEMBRANES

Replacement Reverse Osmosis (RO)Membranes

Manufacturer Size DxL Siemens Manufacturer’s Type Approx GPD % RejectCatalog No. Catalog No.

Ionpure 4 x 40 06/PL32364-01R PWS PFC-4 TFC 2300 99.6Ionpure 4 x 40 06/PL32364-02R PWS HS2-4 TFC 2800 99.6Ionpure 8 x 40 06/PL32364-04R PWS PFC-8 TFC 9000 99.6Ionpure 8 x 40 06/PL32364-06R PWS HS2-8 TFC 11200 99.6Filmtec 4 x 40 ROSTW4040 TW30-4040 TFC 2400 99.5Filmtec 4 x 40 CDRCLP4040 LP-4040 TFC 3200 99.2Filmtec 4 x 40 CDRCXLE4040 XLE-4040 TFC 2600 99.0Filmtec 4 x 40 CDRC4X40B BW30-4040 TFC 2400 99.5Filmtec 4 x 40 CDRCLE4X40B BW30LE-4040 TFC 2300 99.2Filmtec 4 x 40 CDRC4X40L RO-4040-FF TFC 2650 99.5Filmtec 4 x 40 CDRCF4040L379P HSRO-4040-FF TFC 1900 99.5Filmtec 4 x 40 CDRCSW304040 SW30-4040 TFC 1500 99.2Filmtec 8 x 40 CDRC30365 BW30-365 TFC 9500 99.5Filmtec 8 x 40 CDRC8X40D BW30-400 TFC 10500 99.5Filmtec 8 x 40 CDRC8X40LE BW30LE-440 TFC 11500 99.2Filmtec 8 x 40 CDRC30365FR BW30-365FR TFC 9500 99.5Filmtec 8 x 40 CDRCBW30400/34I BW30-400/34i TFC 10500 99.5Filmtec 8 x 40 CDRCBW30440I BW30-440i TFC 11500 99.5Filmtec 8 x 40 CDRCLE440I LE-440i TFC 12650 99.3Filmtec 8 x 40 CDRCSW30XLE400I SW30-400i TFC 9000 99.7Filmtec 8 x 40 CDRCSW30HRLE400I SW30HR-LE400i TFC 7500 99.8Filmtec 8 x 40 CDRCSW30HRLE400 SW30HR-LE400 TFC 7500 99.8Hydranautics 4 x 40 ROLSA4040 CPA2-4040 TFC 2250 99.2Hydranautics 4 x 40 CDHYESPA14040 ESPA1-4040 TFC 2600 99.0Hydranautics 4 x 40 CDHYESPA24040 ESPA2-4040 TFC 1900 98.0Hydranautics 4 x 40 CDHYESPA34040 ESPA3-4040 TFC 3000 98.0Hydranautics 4 x 40 CDHYESPA44040 ESPA4-4040 TFC 2500 99.2Hydranautics 4 x 40 CDHYSWC14040 SWC1-4040 TFC 1100 99.6Hydranautics 8 x 40 ROLSY8040 CPA2 TFC 10000 99.2Hydranautics 8 x 40 CDHYCPA3 CPA3 TFC 11000 99.6Hydranautics 8 x 40 CDHYCPA4 CPA4 TFC 6000 99.7Hydranautics 8 x 40 CDHYESPA1 ESPA1 TFC 12000 99.0Hydranautics 8 x 40 CDHYESPA2 ESPA2 TFC 9000 99.5Hydranautics 8 x 40 CDHYESPA3 ESPA3 TFC 15000 98.0Hydranautics 8 x 40 CDHYESPA4 ESPA4 TFC 12000 99.2Hydranautics 8 x 40 CDHYSWC3 SWC3 TFC 5900 99.6Hydranautics 8 x 40 CDHYSWC3PLUS SWC3+ TFC 7000 99.8Hydranautics 8 x 40 CDHYSWC4PLUS SWC4 TFC 6500 99.8Hydranautics 8 x 40 CDHYSWC5 SWC5 TFC 9000 99.8

Siemens is your leading source for replacement membranes. We supply elementsfrom all of the major manufacturers. For your convenience, we inventoryFILMTEC™ and Hydranautics® membranes at our regional distribution facilities.This enables us to meet short lead times and thereby minimize your systemdowntime. In addition, we also stock major components such as replacementgauges, pumps and end caps. Whether it involves normal wear-and-tearreplacement, maintenance or spares inventory, Siemens has the products tosupport your membrane system.

Items in BLUE are stocked by Siemens.For availability of other items, please contact your local Siemens sales representative.

163




REVERSE OSMOSIS MEMBRANES - OBSOLETE SIEMENS SYSTEMS

CARO RO Membrane Cartridges

• Spiral wound modules constructed of cellulose acetate membrane

• Designed to operate in Series 60, 120, 250, 350, M-1000/2000/3000 RO

systems, and other units

• Chlorine tolerant for sanitization

• Good salt rejection

• Competitive flux rates

• Ideal for medical, hemodialysis, pharmaceutical, biotechnology, food and

beverage and laboratory applications

PERFORMANCE AND PHYSICAL SPECIFICATIONSMR40 MR60 4 x 40 8 x 40

Initial Flow Rate @ 25°C/200 psi 1.0 L/min > 1.3 L/min 1360 gpd 7000 gpdInitial Rejection Monovalent Ions >90% >93% >96% >96%Initial Rejection Divalent Ions . . >95% >96%Length/in. (cm) . . . . . . . . . . . . . 25 (63.5) 25 (63.5) 40 (101.6) 40 (101.6)Diameter/in. (cm) . . . . . . . . . . . 3.5 (8.9) 3.84 (9.75) 4 (10.2) 8 (20.3)Diameter (unstressed chevron seal)/in. (cm) . . . . . . . . 3.74 (9.50) 4.21 (10.69) — —Membrane Surface Area (ft2) (m2). . . . . . . . . . . . . . . . . . . . . 40 (3.72) 60 (5.57)Product Tube Diameter/in. (cm). . — — 0.625 (1.59) 1.5 (3.81)

FEED WATER SPECIFICATIONSOperating Pressure. . . 140-400 psi Langelier Saturation Index of Reject<–0.5 ppmTemperature . . . . . . . . 2-35°C Free Chlorine. . . . . . . . . . . . . . . . . <1.5 ppmpH . . . . . . . . . . . . . . . . 4 - 7.5 Maximum Cartridge Recovery. . . . 15%Silt Density Index . . . . < 5 Maximum Feed Turbidity . . . . . . . . 1 NTU

ORDERING INFORMATIONRO System Cartridges Used Quantity RequiredMR40C CartridgesSeries 60 . . . . . . . . . . . . . . . . . CDRO 025 S1 1 eachSeries 120 . . . . . . . . . . . . . . . . CDRO 025 S1 1 each

CDRO 025 SH 1 eachSeries 250 . . . . . . . . . . . . . . . . CDRO 025 S1 1 each

CDRO 025 SH 2 eachSeries 350 . . . . . . . . . . . . . . . . CDRO 025 S1 1 each

CDRO 025 SH 3 eachMR60 CartridgesSeries 1000, 2000 . . . . . . . . . . CDRO M60 S1 Quantities vary, consult

Technical Support4x40/8x40 CartridgesSeries 2500, 3000 . . . . . . . . . . CDROFG440 (1/pk)Series 4000, 8400 . . . . . . . . . . CDROFG840 (1/pk)

Quantities vary, consult Technical Support

164



REVERSE OSMOSIS SYSTEMS

VANTAGE™ MicROFlow Rates from 0.1 to 1.6 gpm


Model Number MCRO1 MCRO2 MCRO4 MCRO8 MCRO12 MCRO16

Product Flow* (gpm)................................ 0.1 0.17 0.4 0.8 1.2 1.6Feed Flow (gpm)...................................... 0.2 0.34 0.8 1.6 2.4 3.2Reject Flow (gpm).................................... 0.1 0.17 0.4 0.8 1.2 1.6Reject Recycle (gpm) .............................. 0.6 0.6 0.8 1.6 2.5 3.2

ConnectionsFeed Inlet................................................. 3/8" FNPT 3/8" FNPT 3/8" FNPT 3/8" FNPT 3/8" FNPT 3/8" FNPTProduct Outlet.......................................... 3/8" FNPT 3/8" FNPT 3/8" FNPT 3/8" FNPT 3/8" FNPT 3/8" FNPTReject to Drain Outlet .............................. 3/8" FNPT 3/8" FNPT 3/8" FNPT 3/8" FNPT 3/8" FNPT 3/8" FNPT

MembranesMembrane Size........................................ 2.5” diameter 2.5” diameter 2.5” diameter 2.5” diameter 2.5” diameter 2.5” diameterMembranes/Vessel .................................. 1 1 1 1 1 1Membrane Quantity ................................. 1 1 1 2 3 4VesselsVessel Staging ......................................... 1 1 1 1:1 1:1:1 1:1:1:1

System Dimensions**H x W x D . . . . . . . . . . . . .inches 48x28x10 48x28x10 48x28x10 48x28x10 48x28x10 48x28x10Shipping Weight . . . . . . . . . . . . . . . . . . . . . . . . . .lb 47 50 53 57 61 65

Electrical RequirementsHigh Voltage Service ............................... 120V 1PH 120V 1PH 120V 1PH 120V 1PH 120V 1PH 120V 1PHHigh Voltage FLA..................................... 6.5 6.5 6.5 6.5 6.5 6.5

*Product flow rates are based on equipment design parameters. These product flow rates may not be appropriate for other feed waters.**Does not include operating space requirements.

Vantage™ MicRO Series reverse osmosis units are designed and manufactured for

commercial applications. Each MicRO model consists of a single stage, positive

displacement, rotary vane pump, and tap water membranes. Each unit is fully tested

at the factory and only requires simple utility connections (feed water inlet, product

water outlet, drain and a power source).

Capabilities

• High pressure feed pump

• PVC end entry pressure vessels

• Spiral wound thin film composite (TFC) membranes

• Hand/Off/Auto switch for system operation

• Schedule 80 PVC product piping

• Electrical cord with male plug designed to be plugged into a standard 115VAC,

grounded receptacle

OPTIONAL ACCESSORIES


MCRIP04 Prefilter gauge, feed water low-pressure switch, product flow meter, reject recycle flow meter for: MCRO1, MCRO2, MCRO4

MCRIP16 Prefilter gauge, feed water low-pressure switch, product flow meter, reject recycle flow meter for: MCRO8, MCRO12, MCRO16

MCRTL Tank level switch for all models

MCRSP Free standing mounting frame for all models


165





VANTAGE™ M21 Series RO Flow Rates from 0.4 to 1.6 gpm

Vantage™ Reverse Osmosis units are pre-engineered systems specifically designed for a

variety of industrial applications. Vantage™ systems offer you the greatest flexibility

possible from a standard system. The control system is an advanced microprocessor-

based system that is very easy to use.

Capabilities

• TFC (thin film composite) RO membranes ensure optimum water quality

• Microprocessor-based controller provides user-friendly programmable controls

• Small footprint minimizes required space

• Low energy membranes reduce operating costs

• Clean-in-place connections maximize system availability

• Dial-up capability enables real-time remote monitoring (optional)


Model Number M21R001 M21R002 M21R003 M21R004

Product Flow* (gpm) . . . . . . . . . . 0.4 0.8 1.2 1.6Feed Flow (gpm) . . . . . . . . . . . . . 0.8 1.6 2.4 3.2Reject Flow (gpm) . . . . . . . . . . . . 0.4 0.8 1.2 1.6Reject Recycle (gpm) . . . . . . . . . 3.1 2.3 1.5 0.7ConnectionsFeed Inlet . . . . . . . . . . . . . . . . . . . 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPTProduct Outlet . . . . . . . . . . . . . . . 1/2” tube 1/2” tube 1/2” tube 1/2” tubeReject to Drain Outlet . . . . . . . . . 3/8” tube 3/8” tube 3/8” tube 3/8” tubeMembranesMembrane Quantity . . . . . . . . . . . 1 2 3 4Membrane Size . . . . . . . .(inches) 2.5x40 2.5x40 2.5x40 2.5x40VesselsVessel Array . . . . . . . . . . . . . . . . . 1 1:1 1:1:1 1:1:1:1System Dimensions**H x W x D

inches . . . . . . . . . . . . . . . . . . . 62x17x26 62x17x26 62x17x26 62x17x26cm . . . . . . . . . . . . . . . . . . . . . . 157x43x66 157x43x66 157x43x66 157x43x66

Shipping Weightlb . . . . . . . . . . . . . . . . . . . . . . . 80 90 100 110kg . . . . . . . . . . . . . . . . . . . . . . 36 41 45 50

*Product flow rates are based on equipment design parameters and may not be appropriate for other feed waters.**Does not include operating space requirements.



Catalog Number: M21R 004 E DM21R . . . . . . . . . . . . . . . Vantage M21 Series RO 001 - 1 Membrane A - 120/240 VAC, 1 PH, 60 HZ

002 - 2 Membranes B - 208 VAC, 3 PH, 60 HZ003 - 3 Membranes C - 230 VAC, 3 PH, 60 HZ

Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 004 - 4 Membranes D - 460 VAC, 3 PH, 60 HZPackage Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E - Economy E - 575 VAC, 3 PH, 60 HZVoltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F - 380 VAC, 3 PH, 50 HZ

166




VANTAGE™ M41 High Purity (HP) Series RO Flow Rates from 1.4 to 15 gpm


Model Number* M41RHP001 M41RHP002 M41RHP003 M41RHP004 M41RHP005 M41RHP006

Product Flow** (gpm) 1.4 2.8 4.0 5.2 6.2 7.0Feed Flow (gpm) 2.8 5.6 8.0 6.9 8.3 9.3Reject Flow (gpm) 1.4 2.8 4.0 1.7 2.1 2.3Reject Recycle (gpm) 7.0 5.0 4.0 6.0 6.0 6.0ConnectionsFeed Inlet 1-1/2" Flange 1-1/2" Flange 1-1/2" Flange 1-1/2" Flange 1-1/2" Flange 1-1/2" FlangeProduct Outlet 3/4" NPT 3/4" NPT 3/4" NPT 3/4" NPT 3/4" NPT 3/4" NPTReject to Drain Outlet 3/4" NPT 3/4" NPT 3/4" NPT 3/4" NPT 3/4" NPT 3/4" NPTMembranesMembrae Size 4 x 40 4 x 40 4 x 40 4 x 40 4 x 40 4 x 40Membrane Quantity 1 2 3 4 5 6VesselsVessel Staging 1 1:1 1:1:1 1:1:1:1 1:1:1:1:1 2:1:1:1:1System Dimensions***Shipping Weight . . . . . . . . . . . . . . . . . . . lb 550 575 600 625 650 675

Model Number* M41RHP008 M41RHP009 M41RHP012

Product Flow** (gpm) 10.0 12.0 15.0Feed Flow (gpm) 13.3 16.0 20.0Reject Flow (gpm) 3.3 4.0 5.0Reject Recycle (gpm) 8.0 11.0 10.0ConnectionsFeed Inlet 1-1/2" Flange 1-1/2" Flange 1-1/2" FlangeProduct Outlet 3/4" NPT 3/4" NPT 3/4" NPTReject to Drain Outlet 3/4" NPT 3/4" NPT 3/4" NPTMembranesMembrane Size 4 x 40 4 x 40 4 x 40Membrane Quantity 8 9 12VesselsVessel Staging 2:2:1:1:1:1 3:2:2:1:1 3:3:2:2:1:1System Dimensions***Shipping Weight . . . . . . . . . . . . . . . . . . . lb 750 775 850

*The 4 designates 4" housing, the 1 designates element in length, and the 0X designates the number of membranes.**Product flow rates are based on equipment design parameters. These product flow rates may not be appropriate for other feed waters.***Does not include operating space requirements.

The Vantage™ M41RHP (High Purity) series RO units are designed and manufactured for

industrial applications. Units contain 4-inch membranes with flow rates of 1.4 to 15.0 gallons

per minute (0.32 to 3.4 m3

/hr). They arrive with membranes installed and only require simple

utility connections to begin operations. Their simple designs maximize reliability of the RO unit.

Capabilities

• TFC membranes (choice of full-fit or brackish water) ensure optimum water quality


• Clean-in-place connections maximize system availability and serviceability

• Optional modem is available to enable real-time remote monitoring

• Stainless steel high pressure piping and fittings


167





Catalog Number: M41RHP 012 E S DM41RHP . . . . . . . . . . . . . Vantage M41 High Purity RO 001 - 1 Membrane

002 - 2 Membranes003 - 3 Membranes004 - 4 Membranes005 - 5 Membranes006 - 6 Membranes008 - 8 Membranes009 - 9 Membranes B - 208 VAC, 3 ph, 60 Hz

Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 012 - 12 Membranes C - 230 VAC, 3 ph, 60 HzPackage Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E - Economy S - BW30-4040 D - 460 VAC, 3 ph, 60 HzMembrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F - RO-4040-FF E - 575 VAC, 3 ph, 60 Hz

Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F - 380 VAC, 3 ph, 50 Hz



VANTAGE™ M41 High Purity (HP) Series RO Flow Rates from 1.4 to 15 gpm

168




VANTAGE™ M41 General Purpose (GP)Series RO Flow Rates from 1.4 to 10 gpm


Model Number with centrifugal pump . . . . M41RGP001 M41RGP002 M41RGP003 M41RGP004 M41RGP005 M41RGP006 M41RGP008Product Flow* (gpm) . . . . . . 1.4 2.8 4.0 5.2 6.3 7.5 10Feed Flow (gpm) . . . . . . . . . 2.8 5.6 8.0 8.0 8.3 10.0 13.3Reject Flow (gpm) . . . . . . . . 1.4 2.8 4.0 2.8 2.0 2.5 3.3Reject Recycle (gpm) . . . . . 6.8 4.0 9.3 9.0 9.0 7.3 4.0ConnectionsFeed Inlet. . . . . . . . . . . . . . . 1-1/2”NPT 1-1/2”NPT 1-1/2”NPT 1-1/2”NPT 1-1/2”NPT 1-1/2”NPT 1-1/2”NPTProduct Outlet . . . . . . . . . . . 3⁄4” NPT 3⁄4” NPT 3⁄4” NPT 3⁄4” NPT 3⁄4” NPT 3⁄4” NPT 3⁄4” NPTReject to Drain Outlet . . . . . 3⁄4” NPT 3⁄4” NPT 3⁄4” NPT 3⁄4” NPT 3⁄4” NPT 3⁄4” NPT 3⁄4” NPTMembranesMembrane Quantity . . . . . . . 1 2 3 4 5 6 8Membrane Size. . . . (inches) 4x40 4x40 4x40 4x40 4x40 4x40 4x40VesselsVessel Array. . . . . . . . . . . . . 1 1:1 1:1:1 1:1:1:1 1:1:1:1:1 2:1:1:1:1 2:2:1:1:1:1System Dimensions**H x W x D. . . . . . . . . . . . . . . . . inches 72x38x34 72x38x34 72x38x34 72x38x34 72x38x34 72x38x34 72x38x34. . . . . . . . . . . . . . . . . . . . cm 183x97x86 183x97x86 183x97x86 183x97x86 183x97x86 183x97x86 183x97x86

Shipping Weight . . . . . . . . . . . . . . . . . . . . . lb 550 575 600 625 700 725 750. . . . . . . . . . . . . . . . . . . . . kg 250 261 273 284 318 330 341

*Product flow rates are based on equipment design parameters and may not be appropriate for other feed waters.

**Does not include operating space requirements.

Vantage™ Reverse Osmosis units are pre-engineered systems specifically designed for

a variety of industrial applications. Vantage™ systems offer the greatest flexibility



Capabilities

• TFC (thin film composite) RO membranes ensure optimum water quality

• Low energy membranes reduce operating costs



• Dial-up capability enables real-time remote monitoring (optional)



Catalog Number: M41RGP 008 E S DM41RGP . . . . . . . . . . . . . Vantage M41 General Purpose RO 001 - 1 Membrane

002 - 2 Membranes

003 - 3 Membranes

004 - 4 Membranes

005 - 5 Membranes

006 - 6 Membranes B -208 VAC, 3 ph, 60 Hz

Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 008 - 8 Membranes C -230 VAC, 3 ph, 60 Hz

Package Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E - Economy D -460 VAC, 3 ph, 60 Hz

Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S - XLE-4040 E - 575 VAC, 3 ph, 60 Hz

Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F - 380 VAC, 3 ph, 50 Hz

169




Vantage™ Reverse Osmosis units are pre-engineered systems specifically designed for

a variety of industrial applications. Vantage™ systems offer you the greatest flexibility



Capabilities

• TFC (thin film composites) RO membranes ensure optimum water quality


• Pre-engineered systems allow easy installation


• Auxiliary equipment interface provides system-wide control


Model Number M43R009 M43R012 M43R015 M43R018

Product Flow* (gpm) . . . . . . . . . . . . . . . . . 10.5 15 19 23

Feed Flow (gpm) . . . . . . . . . . . . . . . . . . . . 16.2 21.4 25.3 30.7Reject Flow (gpm) . . . . . . . . . . . . . . . . . . . 5.7 6.4 6.3 7.7

Connections

Feed Inlet . . . . . . . . . . . . . . . . . . . . . . . . . . 2” 2” 2” 2”

Product Outlet . . . . . . . . . . . . . . . . . . . . . . 1-1/2” 1-1/2” 1-1/2” 1-1/2”

Reject to Drain Outlet . . . . . . . . . . . . . . . . 3/4” NPT 3/4” NPT 3/4” NPT 3/4” NPT

Membranes

Membrane Quantity . . . . . . . . . . . . . . . . . . 9 12 15 18

Membrane Size . . . . . . . . . . . . . . .(inches) 4x40 4x40 4x40 4x40

Vessels

Vessel Array . . . . . . . . . . . . . . . . . . . . . . . . 1:1:1 2:1:1 2:2:1 3:2:1

Pump

Pump Type . . . . . . . . . . . . . . . . . . . . . . . . . Vertical Multi-stage Vertical Multi-stage Vertical Multi-stage Vertical Multi-stage

System Dimensions**

H x W x Dinches . . . . . . . . . . . . . . . . . . . . . . . . . . 63x23x129 63x23x129 63x23x129 63x23x129

cm . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 160x58x328 160x58x328 160x58x328 160x58x328

Shipping Weight

lb . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1110 1250 1400 1550

kg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 505 568 636 705

*Product flow rates are based on equipment design parameters. These product flow rates may not be appropriate for other feed waters.**Does not include operating space requirements.



Catalog Number: M43R 018 E S DM43R . . . . . . . . . . . . . . . . Vantage M43 Series RO 009 - 9 Membrane

012 - 12 Membranes

015 - 15 Membranes B - 208 VAC, 3 ph, 60 Hz

Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 018 - 18 Membranes C - 230 VAC, 3 ph, 60 Hz

Package Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E - Economy D - 460 VAC, 3 ph, 60 Hz

Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S - BW30LE-4040 E - 575 VAC, 3 ph, 60 Hz

Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . F - 380 VAC, 3 ph, 50 Hz


VANTAGE™ M43 Series RO Flow Rates from 10.5 to 23 gpm

170




Vantage™ M83 Series ROFlow Rates from 30 to 100 gpm

GENERAL SYSTEM SPECIFICATIONS

General Electrical: UL, cUL Enclosures NEMA 12 or betterGeneral Control Specs: Economy – Controlled by Microprocessor

Plus – Controlled by Siemens PLC and user friendly touchscreen Human Machine Interface (HMI)

Deluxe (M83D) – M83P controls plus Variable Frequency Drive (VFD), pH/ORP monitor

Overall Dimensions*: 168” Length, 32” Wide, 77” Height (100 gpm Unit 89” Height)Key Materials of Construction: Painted carbon steel frame, PVC low pressure piping,

stainless steel high pressure pipingMembrane Type: Thin Film Composite brackish water and low energy

membranes (optional)Available Options: Seismic Zone 4 Anchorage Wet Stamp (CA); pH, ORP, or both

on Economy and Plus ModelsContact a Siemens representative for detailed specifications.

Vantage™ M83 Series packaged single-pass 8-inch reverse osmosis units aredesigned for industrial applications requiring high quality equipment with a fastdelivery and a competitive price.

Standard Features:• RO Prefilter

• ASME Code Vessels with Pressure Relief

• Three models: Economy, Plus, and Deluxe:

• Economy utilizes rotameters and a microprocessor

• Plus provides more flexibility via control with a Siemens PLC and a userfriendly touch screen HMI.

• Deluxe provides Siemens PLC/HMI, Variable Frequency Drive andcontrolled feed pump, “On-Board” integrated cleaning system, loose shipchemical tank and hoses, pH/ORP measurement.

Benefits:

• Four (4) week standard lead time keeps your project moving.

• Compact footprint saves valuable floor space.

• Dry contacts are provided for chemical feed, pretreatment equipment, storagetank levels, and pressure switches.

• With simple utility connections and easy to set up controls, the unit is ready forquick on-line service.

171REVERSE OSMOSIS SYSTEMS






Model Number** M83R006 M83R009 M83R012 M83R015 M83R018Product Flow* (gpm)................................ 30 45 60 75 100Feed Flow (gpm)...................................... 40 60 80 100 133Reject Flow (gpm).................................... 10 15 20 25 33Reject Recycle (gpm) .............................. 10 5 5 3 3

ConnectionsFeed Inlet................................................. 2" 2" 2" 3" 3"Product Outlet.......................................... 1.5" 1.5" 2" 2" 3"Reject to Drain Outlet .............................. 1.5" 1.5" 1.5" 1.5" 1.5"

MembranesMembranes/Vessel .................................. 3 3 3 3 3Membrane Quantity ................................. 6 9 12 15 18VesselsVessel Staging ......................................... 1:1 1:1:1 2:1:1 2:2:1 3:2:1

System DimensionsShipping Weight . . . . . . . . . . . .lb 2,900 3,175 3,450 3,725 4,000

*Product flow rates are based on equipment design parameters. These product flow rates may not be appropriate for other feed waters.**The 8 designates 8" housing, the 3 designates 3 elements in length, and the XXX designates the nominal design product flow rate at 65˚ (18.3˚C).


Catalog Number: M83R 018 E S Y DM83R . . . . . . . . . . . . . . . . Vantage M83 Series RO 006 - 6 Membranes

009 - 9 Membranes

012 - 12 Membranes

015 - 15 Membranes E - Economy

Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 018 - 18 Membranes P - Plus

Package Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D - Deluxe S - Standard (ILEC) Element

Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C - Cold Water (LE) Element Y - Divert Kit Included

Product Divert Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . X - Divert Kit Not Included D - 460 VAC, 3 ph, 60 Hz

Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E - 575 VAC, 3 ph, 60 Hz


172







Plus – Controlled by Siemens PLC and user friendly touchscreen Human Machine Interface (HMI), Ethernet

Deluxe –Plus controls with Variable Frequency Drive (VFD), pH and ORP monitors, Ethernet

Overall Dimensions*: 230” Length, 54” Wide, 90” Height (maximum dimensions)Key Materials of Construction: Painted carbon steel frame, PVC low pressure piping,

stainless steel high pressure pipingMembrane Type: Thin Film Composite brackish water and low energy

membranes (optional)Available Options: Seismic Zone 4 Anchorage Wet Stamp (CA); pH, ORP, or both

on Economy and Plus Models

Contact a Siemens representative for detailed specifications.

Vantage™ M84 Series packaged single-pass 8-inch reverse osmosis units aredesigned for industrial applications requiring high quality equipment with afast delivery and a competitive price.

Standard Features:• RO Prefilter


• Product Divert Kit with ASME Code Pressure Relief Valve (Loose Shipped)



• Plus provides more flexibility via control with a Siemens PLC and auser friendly touch screen HMI.

• Deluxe provides Siemens PLC/HMI, Variable Frequency Drive andcontrolled feed pump, “On-Board” integrated cleaning system, looseship chemical tank and hoses, pH/ORP measurement.

Benefits:



• Dry contacts are provided for chemical feed, pretreatment equipment,storage tank levels, and pressure switches.

• With simple utility connections and easy to set up controls, the unit isready for quick on-line service.

173REVERSE OSMOSIS SYSTEMS






Model Number** M84R024 M84R036 M84R048Product Flow* (gpm)................................ 107 160 214Feed Flow (gpm)...................................... 143 215 285Reject Flow (gpm).................................... 36 53 71

ConnectionsFeed Inlet................................................. 3" 4" 4"Product Outlet.......................................... 3" 3" 4"Reject to Drain Outlet .............................. 2" 2" 2"

MembranesMembrane Size........................................ 8 x 40 8 x 40 8 x 40Membranes/Vessel .................................. 4 4 4Membrane Quantity ................................. 24 36 48VesselsVessel Staging ......................................... 3:2:1 4:3:2 6:4:2

System DimensionsShipping Weight . . . . . . . . . . . .lb 4,550 5,400 6,000

*Product flow rates are based on equipment design parameters. These product flow rates may not be appropriate for other feed waters.**The 8 designates 8" housing, the 4 designates 4 elements in length, and the XXX designates the nominal design product flow rate at 65˚F (18.3˚C).


Catalog Number: M84R 048 E S DM84R . . . . . . . . . . . . . . . . Vantage M84 Series RO 024 - 24 Membranes


Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 048 - 48 Membranes P - Plus

Package Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D - Deluxe S - Standard (ILEC) Element

Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . C - Cold Water (LE) Element D - 460 VAC, 3 ph, 60 Hz

Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E - 575 VAC, 3 ph, 60 Hz


174 NANOFILTRATION SYSTEMS

Vantage™ M84 Series NanofiltrationFlow Rates from 100 to 214 gpm





Plus – Controlled by Siemens PLC and user friendly touchscreen Human Machine Interface (HMI), Ethernet

Deluxe plus controls plus Variable Frequency Drive (VFD), pH and ORP monitors, Ethernet

Overall Dimensions*: 230” Length, 54” Wide, 90” Height (maximum dimensions)Key Materials of Construction: Painted carbon steel frame, PVC low pressure piping,

stainless steel high pressure pipingMembrane Type: Thin Film Composite nanofiltration membranesAvailable Options: Seismic Zone 4 Anchorage Wet Stamp (CA); pH, ORP, or both

on Economy and Plus Models

Contact a Siemens representative for detailed specifications.

Vantage™ M84 Series packaged single-pass 8-inch nanofiltration units are

designed for industrial and municipal applications requiring high quality

equipment with a fast delivery and a competitive price.

Standard Features:

• Prefilter




• Plus provides more flexibility via control with a Siemens PLC and a user

friendly touch screen HMI.

• Deluxe provides Siemens PLC/HMI, Variable Frequency Drive and

controlled feed pump, “On-Board” integrated cleaning system, loose

ship chemical tank and hoses, pH/ORP measurement.

Benefits:



• Dry contacts are provided for chemical feed, pretreatment equipment,

storage tank levels, and pressure switches.

• With simple utility connections and easy to set up controls, the unit is ready

for quick on-line service.

175





Model Number** M84N024 M84N036 M84N048Product Flow* (gpm)................................ 100 150 200Feed Flow (gpm)...................................... 133 200 267Reject Flow (gpm).................................... 33 50 67

ConnectionsFeed Inlet................................................. 3" 4" 4"Product Outlet.......................................... 3" 3" 4"Reject to Drain Outlet .............................. 2" 2" 2"

MembranesMembrane Size........................................ 8 x 40 8 x 40 8 x 40Membranes/Vessel .................................. 4 4 4Membrane Quantity ................................. 24 36 48VesselsVessel Staging ......................................... 3:2:1 4:3:2 6:4:2

System DimensionsShipping Weight . . . . . . . . . . . .lb 4,300 5,150 5,650

*Product flow rates are based on equipment design parameters. These product flow rates may not be appropriate for other feed waters.**The 8 designates 8" housing, the 4 designates 4 elements in length, and the XXX designates the nominal design product flow rate at 65˚F (18.3˚C).

NANOFILTRATION SYSTEMS

Vantage™ M84 Series NanofiltrationFlow Rates from 100 to 214 gpm


Catalog Number: M84N 048 E S DM84N . . . . . . . . . . . . . . . . Vantage M84 Series Nanofilter 024 - 24 Membranes


Membrane Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 048 - 48 Membranes P - Plus

Package Choice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . D - Deluxe

Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . S - Standard (NF) Element D - 460 VAC, 3 ph, 60 Hz

Voltage Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E - 575 VAC, 3 ph, 60 Hz


176




Pharm40 Series RO SystemsFlow Rates from 6 to 24 gpm

SYSTEM SPECIFICATIONS*Model Number Polypropylene*** 67/P43PP-06S/D* 67/P43PP-09S* 67/P43PP-12S* 67/P44PP-16S* 67/P44PP-20S* 67/P44PP-24S*

Model Number Stainless Steel*** 67/P43SS-06S* 67/P43SS-09S* 67/P43SS-12S* 67/P44SS-16S* 67/P44SS-20S* 67/P44SS-24S*

Initial Production Capacity . . . . . . 6 gpm 9 gpm 12 gpm 16 gpm 20 gpm 24 gpmMaximum Recovery . . . . . . . . . . . 75% 75% 75% 75% 75% 75%Vessel Array. . . . . . . . . . . . . . . . . 1:1 1:1:1 2:1:1 2:1:1 2:2:1 3:2:1

System DimensionsH x W x D

inches . . . . . . . . . . . . . . . . . . . 72x30x140 72x30x140 72x30x140 72x30x182 72x30x182 72x30x182cm. . . . . . . . . . . . . . . . . . . . . . 103x76x356 103x76x356 103x76x356 103x76x462 103x76x462 103x76x462

Shipping Weight lb (kg) . . . . . . . . 1,300 (590) 1,400 (636) 1,500 (681) 1,600 (726) 1,700 (772) 1,800 (817)

Electrical RequirementsMotor Service. . . . . . . . . . . . . . . . 480 VAC 480 VAC 480 VAC 480 VAC 480 VAC 480 VACControls Service. . . . . . . . . . . . . . 120 VAC 120 VAC 120 VAC 120 VAC 120 VAC 120 VAC

Membranes**Size . . . . . . . . . . . . . . . . . (inches) 4x40 4x40 4x40 4x40 4x40 4x40Quantity . . . . . . . . . . . . . . . . . . . . 6 9 12 16 20 24

*S - Denotes RO system equipped with Fixed I/O PLC.*D - Denotes RO system equipped with Expandable I/O PLC.

*Capacities are based on a feed water stream of well or softened water. RO projections should be run to calculate actual system performance.**RO membranes are included with each system. ***Sanitary product piping.

Pharm40 Series Reverse Osmosis (RO) Systems were designed for pharmaceutical,biotech and cosmetic applications. These systems can remove from 97 to 99% of salts1.Units are pre-assembled, pre-wired and hydrostatically tested at the factory. Controlsystems are comprised of a control panel and skid-mounted wiring.

• System is mounted on a polyurethane coated structural steel frame

• Product piping is sanitary stainless steel or sanitary polypropylene

• Pump discharge piping is constructed of Schedule 10 butt welded 316L stainless steel

• Product samples valves are located on the outlet of each vessel for quick and easycontrol

• Easy, continuous control through PLC

• Inputs and outputs are installed to communicate with pretreatment/post-treatmentequipment

• Capable of full cleaning and chemical sanitizing for advanced microbial control

• Comprehensive controls and documentation facilitate easy, thorough validationrequirements

1Based on the RO performance projection.

ORDERING INFORMATIONPharm40 Series RO Systems have extensive option packages. For additional product or orderinginformation, please contact Technical Support at 800.875.7873 ext. 5000.


177





40 Series Reverse Osmosis SystemsFlow Rates from 1.8 to 32 gpm

SYSTEM SPECIFICATIONSSeries 41 Series RO Systems 42 Series RO Systems 43 Series RO Systems

Model Number 41-220 41-230 41-240 41-250 42-230 42-240 43-230 43-240

Performance Specifications*Initial Production Capacity . . . . . . . . . 1.8 gpm 2.7 gpm 3.6 gpm 4.5 gpm 5.4 gpm 7.3 gpm 8 gpm 11 gpmVessel Array . . . . . . . . . . . . . . . . . . . . 1:1 1:1:1 1:1:1:1 1:1:1:1:1 1:1:1 1:1:1:1 1:1:1 2:1:1

Membranes†

Size . . . . . . . . . . . . . . . . . . . . (inches) 4x40 4x40 4x40 4x40 4x40 4x40 4x40 4x40Quantity . . . . . . . . . . . . . . . . . . . . . . . 2 3 4 5 6 8 9 12

System DimensionsHxWxD . . . . . . . . . . . . . . . . . . inches 36x30x72 36x30x72 36x30x72 36x30x72 36x30x96 36x30x96 138x30x82 138x30x82. . . . . . . . . . . . . . . . . . . . . . . . . . . . cm 914x762x1829 914x762x1829 914x762x1829 914x762x1829 914x762x2438 914x762x2438 3505x762x2083 3505x762x2083Shipping Weight lb. (kg) . . . . . . . . . . . 500 (227) 550 (249) 600 (272) 650 (295) 1300 (590) 1400 (635) 1500 (681) 1600 (726)

Electrical Requirements High Voltage Service . . . . . . . . . . . . . 480 VAC 3ph – 60 Hz

40 Series Reverse Osmosis (RO) Systems produce from 1.8 to 32.0 gpm of high-puritywater. These systems can remove up to 98% of dissolved inorganics, over 95% of totaldissolved organics and all colloidal and suspended matter larger than 0.05 micron. Theflexible design accommodates virtually all TFC (thin film composite) 4” spiral wound ROmembranes to suit your application.

• Pre-filtration cartridges are included to protect membranes

• Stainless steel pumps and piping resist corrosion

• Sample valves on the feed provide an easy way to test water quality and guaranteesystem performance

• UL Listed enclosure ensures quality and reliability

• Conductivity meter and PLC controller are included


Catalog Number: 67/ XX – XXX – XXSystem Name . . . . . . . . . . 67/ 41 = 1M Vessel 220 = 2 Vessels. . . . . . . . . . . . . . . . . . . . . 42 = 2M Vessel 230 = 3 Vessels. . . . . . . . . . . . . . . . . . . . . 43 = 3M Vessel 240 = 4 Vessels

Series Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 = 4M Vessel 250 = 5 Vessels. . . . . . . . . . . . . . . . . . . . . . . . . . . 260 = 6 Vessels. . . . . . . . . . . . . . . . . . . . . . . . . . . 270 = 7 Vessels

. . . . . . . . . . . . . . . . . . . . . . . . . . . 280 = 8 Vessels XM = No MembranesVessel Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 290 = 9 Vessels BL = Membranes shipped loose Membrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BN = Membranes installed


Series (continued) 43 Series RO Systems 44 Series RO Systems

Model Number 43-250 43-260 44-240 44-250 44-260 44-270 44-280 44-290

Performance Specifications*Initial Production Capacity . . . . . . . . . 13 gpm 16 gpm 14 gpm 18 gpm 22 gpm 25 gpm 29 gpm 32 gpmVessel Array . . . . . . . . . . . . . . . . . . . . 2:2:1 3:2:1 2:1:1 2:2:1 3:2:1 3:2:2 4:2:2 4:3:2

Membranes†

Size. . . . . . . . . . . . . . . . . . . . . . . . . . . 4" x 40" 4" x 40" 4" x 40" 4" x 40" 4" x 40" 4" x 40" 4" x 40" 4" x 40"Quantity . . . . . . . . . . . . . . . . . . . . . . . 15 18 16 20 24 28 32 36

System DimensionsHxWxD . . . . . . . . . . . . . . . . . . inches 138x30x82 138x30x82 178x30x82 178x30x82 178x30x82 178x30x82 178x30x82 178x30x82. . . . . . . . . . . . . . . . . . . . . . . . . . . . cm 3505x762x2083 3505x762x2083 4521x762x2083 4521x762x2083 4521x762x2083 4521x762x2083 4521x762x2083 4521x762x2083Shipping Weight lb. (kg) . . . . . . . . . . . 1700 (772) 1800 (817) 1900 (863) 2000 (908) 2100 (953) 2200 (999) 2300 (1044) 2400 (1090)

Electrical Requirements High Voltage Service . . . . . . . . . . . . . 480 VAC 3ph – 60 Hz

†Replacement RO membrane information is available. See catalog index.*Capacities are based on a feed water stream of well or softened water. RO projections should be run to calculate actual system performance.

178




Vantage™ M240 Series Two PassReverse Osmosis SystemsFlow Rates from 5 to 20 gpmVantage™ M240 Series Reverse Osmosis (RO) Systems can remove up to 98% of

dissolved inorganics, over 95% of total dissolved organics and all colloidal and suspended

matter larger than 0.05 micron. The flexible design can accommodate virtually all TFC

(thin film composite) 4" spiral wound RO membranes to suit your application.



• Sample valves on the feed provide an easy mechanism to test water quality and

guarantee system performance


SYSTEM SPECIFICATIONSSeries M243 Series RO Systems M244 Series RO Systems

Model Number M243-250 M243-260 M244-260 M244-280 M244-300Performance Specifications*Initial Production Capacity1 . . . . . . . . . 5 gpm 7.5 gpm 10 gpm 15 gpm 20 gpmVessel Array . . . . . . . . . . . . . . . . . . . . . 1:1:1/1:1 2:1:1/1:1 2:1:1/1:1 2:2:1/2:1 3:2:1/2:1:1

Membranes†

Size . . . . . . . . . . . . . . . . . . . . . (inches) 4x40 4x40 4x40 4x40 4x40Quantity (1st pass/2nd pass) . . . . . . . . 9/6 12/6 16/8 20/12 24/16

System DimensionsHxWxD

inches. . . . . . . . . . . . . . . . . . . . . . 148x40x82 148x40x82 178x40x82 178x40x82 178x40x82cm . . . . . . . . . . . . . . . . . . . . . . . . 3579x1016x2083 3579x1016x2083 4521x1016x2083 4521x1016x2083 4521x1016x2083

Shipping Weight lb. (kg). . . . . . . . . . . . 1800 (817) 1900 (863) 2200 (999) 2400 (1090) 2600 (1180)

Electrical Requirements High Volume Service . . . . . . . . . . . . . 480 VAC 3ph – 60 Hz

†Replacement RO membrane information is available. See catalog index.*Capacities are based on a feed water stream of well or softened water. RO projections should be run to calculate actual systemperformance.

1Inlet water 20 – 75 psig operating at 75 and 90% recovery.


Catalog Number: 67/ XXX – XXX – XX

System Name . . . . . . . . . . . . . 67/ 243 = Two Pass, 4", 3 Membranes/Vessel 250 = 5 VesselsEquipment Product Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . 244 = Two Pass, 4", 4 Membranes/Vessel 260 = 6 Vessels. . . . . . . . . . . . . . . . . . . . . . . . . . 280 = 8 Vessels

Vessel Designation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . 300 = 10 Vessels XM = No MembranesMembrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BL = BW30-4040 shipped loose

OPTION ORDERING INFORMATION

Catalog Number: XpH Monitor = 24/S1001-161 Alarm Beacon = 24/S1001-162

Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . High Product Pressure Switch = 24/S1001-163


179





Vantage™ M280 Series Two PassReverse Osmosis SystemsFlow Rates from 25 to 150 gpm

Vantage™ M280 Series Reverse Osmosis (RO) Systems can remove up to 98% ofdissolved inorganics, over 95% of total dissolved organics and all colloidal andsuspended matter larger than 0.05 micron. Their flexible design can accommodatevirtually all TFC (thin film composite) 8" spiral wound RO membranes to suit your application.

• For manufacturing, beverage, microelectronics and boiler feed applications

• Side-port membrane housing reduces maintenance costs



• Sample valves on the feed provide an easy mechanism to test water quality andguarantee system performance


SYSTEM SPECIFICATIONSSeries M283 Series M284 Series M286 Series

Model Number M283-250 M284-230 M284-260 M284-280 M284-290 M286-280 M286-310 M286-320

Performance Specifications*Initial Production Capacity 25 gpm 25 gpm 50 gpm 60 gpm 75 gpm 100 gpm 125 gpm 150 gpmVessel Array 1:1:1/1:1 1:1/1 2:1:1/1:1 2:2:1/1:1:1 3:2:1/2:1 3:2/2:1 5:2/3:1 5:3/3:1

Membranes†

Size 8" x 40" 8" x 40" 8" x 40" 8" x 40" 8" x 40" 8" x 40" 8" x 40" 8" x 40"Quantity (1st pass/2nd pass) 9/6 8/4 16/8 20/12 24/12 30/18 42/24 48/24

System DimensionsHxWxD inches 166x41x78 201x41x78 201x41x78 196x56x90 196x56x90 277x56x91 277x56x91 277x56x91

cm 4216x1041x1981 5105x1041x1981 5105x1041x1981 4978x1422x2286 4978x1422x2286 7036x1422x2311 7036x1422x2311 7036x1422x2311Shipping Weight lb. (kg) 3000 (1361) 3200 (1453) 3600 (1634) 4000 (1814) 4200 (1907) 7000 (3175) 8500 (3856) 9000 (4082)

Electrical Requirements High Volume Service . . . . . . . . 480 VAC 3ph – 60 Hz

†Replacement RO membrane information is available. See catalog index.*Capacities are based on a feed water stream of well or softened water. RO projections should be run to calculate actual system performance.


Catalog Number: 67/ XX XXX XX

System Number . . . . . . . . 67/ 283 = Two Pass, 8", 3 Membranes/Vessel 230 = 3 Vessels 280 = 8 Vessels284 = Two Pass, 8", 4 Membranes/Vessel 240 = 4 Vessels 290 = 9 Vessels

Equipment Series . . . . . . . . . . . . . . . . . . . . . . . 286 = Two Pass, 8", 6 Membranes/Vessel 250 = 5 Vessels 300 = 10 Vessels260 = 6 Vessels 310 = 11 Vessels

Vessel Designation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 270 = 7 Vessels 320 = 12 Vessels XM = No MembranesMembrane Option . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . BL = Membranes shipped loose

OPTION ORDERING INFORMATION

Catalog Number: XpH Monitor = 24/S2001-160

. . . . . . . . . . . . . . . . . . . . . . . Product Water Flush = 24/S2001-161

. . . . . . . . . . . . . . . . . . . . . . . Alarm Beacon = 24/S2001-162

. . . . . . . . . . . . . . . . . . . . . . . High Pump Discharge Pressure Switch = 24/S2001-163. . . . . . . . . . . . . . . . . . . . . . . . . . High Product Pressure Switch = 24/S2001-164Options . . . . . . . . . . . . . . . . . . . . . . Interstage Caustic Injection Pump (Shipped Loose) (call tech support)


180




BevMAX™ Systems

For Beverage Applications Requiring 50 to 360 gpm

A custom solution with standard products: BevMAX™ standard, pre-packaged

reverse osmosis systems are designed for beverage, drinking water, or other

applications requiring all sanitary stainless steel piping. With ten configurations

available, we can create the system that meets your needs.

BevMAX Systems come with the following items as standard:

• 8" pressure vessels

• Choice of thin film composite (TFC), with three membrane choices — standard

brackish water , low-pressure, or nanofiltration

• Stainless steel multi-stage booster pump

• Programmable logic controller (PLC)

• Butt-welded 316L stainless steel piping

• Conductivity and flow monitors

• Vortex shedding flow meters

Although BevMAX Systems come with standard membrane, piping, pump and

controller choices, you can pick and choose from a wide variety of options to

configure a system that meets your specific needs. Contact your Sales Representative

or our Technical Support Group for more information.

BevMAX™ PRE-PACKAGED UNITS AT-A-GLANCEFeed Product Piping Pump Type Membrane Type Controls Type

Piping

Unit Series Flow Rate Range (gpm)(at default flux rate)

BevMAX . . . . . . . . . . BM Series 75-300 l l l l l

BL Series 90-360 l l l l l

BN Series 50-250 l l l l l

PVC

316L

SST

PVC

316L

SST

Sani

tary

PPL

Sani

tary

316

LSS

T

Vert.

Mul

ti-St

age

Horiz

. Mul

ti-St

age

Subm

ersi

ble

MS

Brac

kish

Wat

er T

FC

(Low

Pre

ssur

e)

Nano

filtra

tion

Fixe

d I/O

PLC

181





BevMAX™ SystemsFor Beverage Applications Requiring 50 to 360 gpm

SYSTEM SPECIFICATIONSModel Number BL3-18 BL4-28 BL4-40 BL6-54 BL6-72 BM3-18 BM4-28 BM4-40 BM6-54 BM6-72

Product Flow** . . . . . . . . . . . . . 90 gpm 140 gpm 200 gpm 270 gpm 360 gpm 75 gpm 115 gpm 165 gpm 225 gpm 300 gpmFeed Flow. . . . . . . . . . . . . . . . . 120 gpm 187 gpm 267 gpm 360 gpm 480 gpm 100 gpm 153 gpm 220 gpm 300 gpm 400 gpmReject Flow. . . . . . . . . . . . . . . . 30 gpm 47 gpm 67 gpm 90 gpm 125 gpm 25 gpm 38 gpm 55 gpm 75 gpm 100 gpmReject Recycle Flow. . . . . . . . . 5 gpm — — — — 5 gpm — — — —Nominal Recovery . . . . . . . . . . 75% 75% 75% 75% 75% 75% 75% 75% 75% 75%

MembranesMembranes/Vessel . . . . . . . . . . 3 4 4 6 6 3 4 4 6 6Membrane Quantity . . . . . . . . . 18 28 40 54 72 18 28 40 54 72

VesselsVessel Array . . . . . . . . . . . . . . . 3:2:1 4:2:1 5:3:2 6:3 8:4 3:2:1 4:2:1 5:3:2 6:3 8:4Vessel Quantity. . . . . . . . . . . . . 6 7 10 9 12 6 7 10 9 12


inches . . . . . . . . . . . . . . . . . . . . . . 85x44x150 81x55x190 81x55x190 90x60x275 90x60x275 85x44x150 81x55x190 81x55x190 90x60x275 90x60x275cm . . . . . . . . . . . . . . . . . . . . . . . . . 216x112x381 206x140x483 206x140x483 229x152x699 229x152x699 216x112x381 206x140x483 206x140x483 229x152x699 229x152x699

Shipping Weightlb . . . . . . . . . . . . . . . . . . . . . . 2900 3800 4400 7500 9000 2900 3800 4400 7500 9000kg. . . . . . . . . . . . . . . . . . . . . . 1315 1724 1996 3402 4082 1315 1724 1996 3402 4082

Electrical RequirementsControls Service . . . . . . . . . . . . 120V 120V 120V 120V 120V 120V 120V 120V 120V 120VMotor Service . . . . . . . . . . . . . . 480V 480V 480V 480V 480V 480V 480V 480V 480V 480VMotor HP . . . . . . . . . . . . . . . . . 30 40 60 75 100 40 60 75 100 125Amp Draw. . . . . . . . . . . . . . . . . 40 52 77 96 124 52 77 96 124 156

Model Number BN3-12 BN4-24 BN4-40 BN6-48 BN6-60

Product Flow** . . . . . . . . . . . . . 50 gpm 100 gpm 165 gpm 200 gpm 250 gpmFeed Flow. . . . . . . . . . . . . . . . . 67 gpm 133 gpm 220 gpm 207 gpm 333 gpmReject Flow. . . . . . . . . . . . . . . . 17 gpm 33 gpm 55 gpm 67 gpm 83 gpmReject Recycle Flow. . . . . . . . . 5 gpm — — — —Nominal Recovery . . . . . . . . . . 75% 75% 75% 75% 75%

MembranesMembranes/Vessel . . . . . . . . . . 3 4 4 6 6Membrane Quantity . . . . . . . . . 12 24 40 48 60

VesselsVessel Array . . . . . . . . . . . . . . . 2:1:1 4:2:1 5:3:2 5:3 6:4Vessel Quantity. . . . . . . . . . . . . 4 7 10 8 10


inches . . . . . . . . . . . . . . . . . . . . . . 85x44x150 81x55x190 81x55x190 90x60x275 90x60x275cm . . . . . . . . . . . . . . . . . . . . . . . . . 216x112x381 206x140x483 206x140x483 229x152x699 229x152x699

Shipping Weightlb . . . . . . . . . . . . . . . . . . . . . . 4400 7500 7500 9000 9000kg. . . . . . . . . . . . . . . . . . . . . . 1996 3402 3402 4082 4082

Electrical RequirementsControls Service . . . . . . . . . . . . 120V 120V 120V 120V 120VMotor Service . . . . . . . . . . . . . . 480V 480V 480V 480V 480VMotor HP . . . . . . . . . . . . . . . . . 10 20 25 30 40Amp Draw. . . . . . . . . . . . . . . . . 14 27 34 40 52

**Product flow rates are based on 16-17 GFD flux rates for well water feed. These product flow rates may not be appropriate for other feed waters. An application specialist can de-rate the units for other feed water conditions.

Due to different feed flow requirements and membrane type, the cartridge filter housings must be sized and ordered separately.

182



SERVICE DEIONIZATION (SDI)

Service Deionization (SDI) Systems

Service Deionization (SDI) from Siemens is a convenient and economical way to

produce high-purity water from potable feed water. SDI systems consist of activated

carbon and ion-exchange resin contained in portable tanks, custom-designed and

configured to meet your water purity requirements, flow rates and budget. With SDI

systems, you don’t have to make a major capital investment, handle chemicals or

maintain equipment — our technically trained service representatives handle tank

delivery, installation and maintenance.

Siemens offers SDI systems and resins that have been regenerated in our GMP (Good

Manufacturing Practices) facility to ensure stringent quality control for critical

pharmaceutical and dialysis applications.

Resin, a Grade for Every Application

Industrial-grade systems produce greater than 14 megohm-cm quality water, are

extremely durable and can be operated at flow rates up to 150 gallons per minute or

higher when multiple systems are placed in parallel. They are especially well suited

for applications where large resin capacities are required.

Premium-grade systems are designed for high-quality applications requiring up to

18 megohm-cm water quality. Filled with Type I or Type II resin, these systems meet

CAP Type I and NCCLS Type I specifications for clinical applications. Our premium-

grade resin manufacturing process is fully batch controlled to ensure consistent

quality.

Ultra-grade, QSR Compliant

Ultra-grade systems are designed for critical laboratory, medical, dialysis and

pharmaceutical applications. These systems deliver up to 18 megohm-cm water

quality with superior silica removal and significantly lower TOC levels. Our ultra-

grade resin manufacturing and regeneration processes are fully documented and

batch controlled, in compliance with good manufacturing practices and quality

system regulations.

183






Quality System Requirements (QSR)

Mixed bed deionizers are specifically processed under QSR requirements in an FDA

registered facility as a medical device for hemodialysis and ultra pure laboratory

applications. These resins are controlled for not only ionic contaminant removal but also

for reduced bacterial and endotoxin limitations. Each regenerated service unit is tested

for pressure integrity and product water quality before it is installed in your plant.

Quality Tested Before it Reaches You

Quality Control

Incoming QC: Raw materials must meet quality specifications.

In-Process QC: Each component has its own operating criteria, and the entire process is

monitored.

Final Product QC: Materials are double-checked for quality with results recorded in the batch

record.

Disinfection

Each service unit is chemically disinfected before refilling.

Document Control

We have a comprehensive document control system. No process changes are made

without proper notification and approval.

Tank Traceability

The serial number of each service unit is recorded on the production control log, so total

traceability is ensured.

184





Choose from a Wide Range of Deionizers and Carbons

Cation-bed Deionizers have a high capacity for removing positively charged

dissolved ionic contaminants such as calcium, sodium, magnesium, potassium, iron

and manganese. The durable gel resins provide stability against osmotic, thermal and

impact shock.

Anion-bed Deionizers have a high capacity for removing negatively charged

dissolved ionic contaminants such as carbonate, bicarbonates, sulfates, chlorides,

nitrates and silica. The durable gel resins used are stable against osmotic, thermal

and impact shock. A variety of anion resins are available, suitable for virtually any

water application.

Mixed-bed Deionizers provide higher quality, and a more neutral pH than separate

bed systems as well as enhanced silica and CO2 removal. Our units are guaranteed to

produce the quality of water required for any removal application, up to 18 megohm-

cm resistivity at 25°C. In-line quality monitors immediately alert users when resin

tanks need to be changed.

Ultra Mixed-bed Deionizers provide superior silica removal and significantly lower

TOC levels. Ideal for microelectronics and pharmaceutical applications where stricter

controls of critical contaminants are required.

Macroporous Organic Scavenger Resins offer extra-large internal surface areas and

can therefore provide higher adsorption of dissolved and undissolved organic

contaminants. The strongly basic anion resins will remove not only those organic

ions normally removed by standard anion exchange, but those that would normally

pass right through most demineralizers.

Colloidal Scavenging Deionizers have a high capacity for removing inorganic and

organic anions. The durable, macroporous resins are extremely resistant to organic

fouling, and efficiently remove colloids.

Activated Carbon Units remove chlorine and some dissolved organic contaminants.

Each replacement carbon unit contains virgin carbon to assure maximum water

quality and service life of the bed.

GMP Tanks for dialysis and validated processes are also available.


SDI is flexible and can be customized to meet your needs. Contact Technical Support at (800) 875-7873, ext. 5000 to discuss your requirements and set-up a site visit and water analysis.

185




SOFTENERS

KF Series SoftenersFlow Rates from 3 to 275 gpm

KF Series Water Softeners are lightweight, with corrosion-resistant FRP pressure vessel

and cost-effective top mounted valve for commercial and light industrial applications.

• Fiberglass tanks are durable and corrosion-free

• Tank liners are blow-molded plastic wrapped in high-strength fiberglass and have

epoxy resin for worry-free service

• Softeners include a motorized, 5-cycle control valve that is quiet, efficient and

dependable

• Automatic regeneration controller is an electromechanical timer

• Duplex systems are available for applications that require a continuous supply

of softened water

• Pretreatment lock-out switch assembly is included to deactivate downstream

equipment during regeneration


Series KFZSS

ApplicationTank Size Pipe Commercial* RO-Feed** Backwash Capacity at Media Overall Shipping Salt(DxH in) Size Service Service Flow 15 lbs./CF Vol. Dimensions Weight Storage

(in) Flow Flow (Grains in 000's) (ft3) LxDxH (in) lb. (kg) lb. (kg)

9x40 1.0 19 gpm 3 gpm 2 gpm 30 1 33x20x50 160 (73) 350 (159)12x52 1.0, 1.5 39 gpm 6 gpm 3.5 gpm 60 2 36x20x66 300 (136) 350 (159)14x65 1.0, 1.5 42 gpm 9 gpm 5 gpm 90 3 44x24x79 450 (204) 700 (318) 16x65 1.0, 1.5 46 gpm 12 gpm 7 gpm 120 4 46x24x79 530 (240) 700 (318)18x65 1.5, 2.0 81 gpm 15 gpm 9 gpm 150 5 50x24x80 730 (331) 700 (318) 21x62 1.5, 2.0 77 gpm 21 gpm 12 gpm 210 7 50x24x80 900 (408) 700 (318)24x72 1.5, 2.0 91 gpm 30 gpm 15 gpm 300 10 60x30x89 1860 (843) 1000 (454)30x72 2.0, 3.0 105 gpm 45 gpm 25 gpm 450 15 66x40x92 1940 (880) 1000 (454)36x72 3.0 250 gpm 60 gpm 35 gpm 600 20 88x40x100 2460 (1116) 1800 (817)42x72 3.0 268 gpm 75 gpm 50 gpm 750 25 105x50x112 2880 (1306) 3700 (1679)48x72 3.0 275 gpm 120 gpm 70 gpm 1200 40 111x50x112 3660 (1660) 3700 (1679)

Electrical Requirements 115V/1 ph /60 Hz – 10 watts

*Flow is based on a differential pressure of <25 psid. Capacity is based on 10 gpg total hardness as CaCO3 that is free of color, oil and turbidity, andregeneration is at 15 lbs. NaCl/ft3.

**Maximum (RO Pretreatment) flow rate calculated at 3 gpm/ft3


PZV

Catalog Number: KFZSS XXX F XZF X X

Description . . . . . . . . . . . . . . KFZSS - Single 009, 012, 014,016, 018, 021,024, 030, 036,

Pressure Vessel Diameter . . . . . . . . . . . . . . . . 042, 048F = Non-Code

Pressure Vessel Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fiberglass A = 1.0"XZF = NEMA 3R Equivalent 7-day Timelock B = 1.5"

Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PZV = NEMA 3R Equivalent Volume Initiation C = 2.0" Inlet/Outlet Pipe Size† . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E = 3.0" X = No Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Option

Not all pipe sizes are available on the standard units, please use the specifications for standard sizes.

To determine your order number, replace the X with one of the numbered options below it.†All sizes are not available with every size.



186



SOFTENERS

KF Series Duplex Alternating SoftenersFlow Rates from 3 to 275 gpm

KF Series Duplex Alternating Water Softeners are lightweight, with corrosion-

resistant FRP pressure vessel, and cost-effective top-mounted valve for

commercial and light industrial applications.


• Tank liners are blow-molded plastic wrapped in high-strength fiberglass and

units have epoxy resin for worry-free service

• Softeners include two motorized, 5-cycle control valves that are quiet,

efficient and dependable

• Automatic regeneration controller with volume initiation facilitates operation

• Maintains flow at all times. One unit is operating while second unit

regenerates and is then in standby


Series KFZSD ApplicationTank Size Pipe Commercial* RO-Feed** Backwash Capacity at Media Shipping Brine Tank Size(D x H) Size Service Service Flow 15 lbs./CF Vol. Weight D x H(inch) (in.) Flow Flow (Grains in 000's) (ft3) lb. (kg) inch (cm)

Electrical Requirements . . . . . . . . . . . . . . . . . . . 115 V/1 ph/60 Hz – 10 watts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

*Flow is based on a differential pressure of <25 psid. Capacity is based on 10 gpg total hardness as CaCO3 that is free of color, oil and turbidity and regeneration is at 15 lbs. NaCl/ft3.**Maximum (RO Pretreatment) flow rate calculated at 3 gpm/ft3


Catalog Number: KFZSD XXX F P Z V X X

Description . . . . . . . . . . . . . . . . . . KFZSD - Duplex 009, 012, 014016, 018, 021

Pressure Vessel Diameter . . . . . . . . . . . . . . . . . . . . . . 024, 030, 036042, 048

F = Non-Code P = NEMA3RPressure Vessel Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fiberglass EquivalentControl Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . with electronic controlsLevel of Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Z = Stand Alone V = Vol. Initiated Alternating A= 1”

with Totalizer B = 1.5" Backwash/Regeneration Initiation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . (with electronic controls) C = 2.0" Inlet/Outlet Pipe Size† . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . E = 3.0" Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. X = No Option

To determine your catalog order number, replace the X with one of the numbered options below it.†All sizes are not available with every tank size.

9 x 40 12 x 5214 x 6516 x 65 18 x 6521 x 6224 x 7230 x 7236 x 7242 x 7248 x 72

11, 1.51, 1.51, 1.51.5, 21.5, 21.5, 22, 3

333

19 gpm39 gpm42 gpm46 gpm81 gpm77 gpm91 gpm213 gpm250 gpm268 gpm275 gpm

3 gpm6 gpm9 gpm12 gpm15 gpm21 gpm30 gpm45 gpm60 gpm75 gpm120 gpm

2 gpm3.5 gpm5 gpm7 gpm9 gpm12 gpm15 gpm25 gpm35 gpm48 gpm63 gpm

3060901201502103004506007501200

1234571015202540

270 (123)500 (227)750 (341)880 (400)

1,220 (554)1,500 (681)

3,100 (1,407)3,240 (1,470)4,100 (1,860)4,800 (2,178)6,100 (2,767)

18x40 (46x102)18x40 (46x102)24x50 (61x127)24x50 (61x127)24x50 (61x127)24x50 (61x127)24x50 (61x127)30x48 (77x122)39x48 (100x122)50x60 (127x153)50x60 (127x153)



187




SOFTENERS

KF Series Twin Alternating SoftenersFlow Rates from 1.5 to 68 gpm

KF Series Twin Alternating Water Softeners are lightweight, with corrosion-resistantFRP pressure vessel, and cost-effective top mounted valve for commercial and lightindustrial applications.


• Tank liners are blow-molded plastic wrapped in high-strength fiberglass and unitshave epoxy resin for worry-free service

• Softeners include a single motorized, 5-cycle control valve that is quiet, efficientand dependable

• Automatic regeneration controller with volume initiation facilitates operation

• Pretreatment lock-out switch assembly is included to deactivate downstreamequipment during regeneration


Series KFZST ApplicationTank Size Pipe Commercial* RO-Feed** Backwash Capacity at Media Overall Shipping Salt(DxH in) Size Service Service Flow 15 lb./CF Vol. Dimensions Weight Storage

(in) Flow Flow (Grains in 000's) (ft3) LxDxH (in) lb. (kg) lb. (kg)

7x44 1.0 15 gpm 1.5 gpm 1.5 gpm 15 0.5 33x18x53 120 (55) 350 (159)9x40 1.0 19 gpm 3 gpm 2 gpm 30 1 33x20x49 190 (86) 350 (159)10x54 1.0 18 gpm 4.5 gpm 3 gpm 45 1.5 34x20x63 250 (114) 350 (159)12x52 1.0, 1.5 39 gpm 6 gpm 3.5 gpm 60 2 36x20x62 310 (141) 350 (159)14x65 1.0, 1.5 42 gpm 9 gpm 5 gpm 90 3 44x24x75 550 (250) 700 (318) 16x65 1.0, 1.5 46 gpm 12 gpm 7 gpm 120 4 46x24x75 700 (318) 700 (318)18x65 1.5 54 gpm 15 gpm 9 gpm 150 5 50x24x75 1050 (476) 700 (318)21x62 1.5 52 gpm 21 gpm 12 gpm 210 7 50x24x80 1220 (553) 700 (318)24x72 1.5 68 gpm 30 gpm 15 gpm 300 10 60x30x88 1610 (730) 1000 (454)

Electrical Requirements . . . . . . . . . . . . . 115 V/1 ph /60 Hz – 10 watts

*Flow is based on a differential pressure of <25 psid. Capacity is based on 10 gpg total hardness as CaCO3 that is free of color, oil and turbidity, and regeneration is at15 lbs. NaCl/ft3.

**Maximum (RO Pretreatment) flow rate calculated at 3 gpm/ft3


Catalog Number: KFZST XXX F X Z N X X

Description . . . . . . . . . . . . . . . . . . KFZST - Twin 007, 009, 010,. . . . . . . . . . . . . . . . . . . . . . . . . . . . 012, 014, 016, Pressure Vessel Diameter . . . . . . . . . . . . . . . . . . . . . . 018, 021, 024,

F = Non-Code Pressure Vessel Type. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FiberglassControl Enclosure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P = NEMA3R EquivalentLevel of Assembly. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Z = Stand Alone

N = Volume Initiated; Single MeterBackwash/Regeneration Initiation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . w/Lock-Out (electromechanical) A= 1.0" Inlet/Outlet Pipe Size† . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . B = 1.5" X = NoOptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Option

To determine your catalog order number, replace the X with one of the numbered options below it.†All sizes are not available with every tank size.



188



SOFTENERS

VP Series SoftenersFlow Rates from 20 to 420 gpm

VP Series Softeners are a low cost, reliable and efficient way to purify water. These

rugged, pre-engineered, pre-assembled units minimize installation and start-up costs

and are ideal for boiler feed, process water or rinse water applications.

• VPES denotes Non-ASME code vessels offered with express delivery

• VPAS denotes ASME code vessels with stamp available



• Structural steel legs (seismic zone 4) provide rigid support of vessel for safety

• Skid mount (seismic zone 4) with structural steel beams for duplex systems



• Standard epoxy internal and external coating extends vessel life


Model Number VPES/VPAS-024 VPES/VPAS-030 VPES/VPAS-630 VPES/VPAS-636 VPES/VPAS-736Flow Rates

Good 50 70 105 140 175Better 35 50 75 100 125Best 20 30 45 60 75

Backwash Flow Rate 17 27 27 39 39Media (cubic feet) 7 10 15 20 25Capacity, Kgr CaCO3 (15 lb./CF) 210 300 450 600 750System Dimensions*Pipe Size 1-1/2” 2” 2-1/2” 2-1/2” 3”Column Size (D x H)

inch 24x48 30x48 30x60 36x60 36x72cm 61x122 77x122 77x153 92x153 92x183

Brine Tank Size - inch 24x48 30x60 30x60 48x48 52x60*H x W x D Simplex - inch 76x41x41 78x43x48 90x51x47 96x51x57 108x55x58

(Duplex) - inch (80x97x41) (82x97x48) (100x97x60) (100x97x60) (112x97x60)Simplex - cm 193x104x104 198x109x122 229x130x119 244x130x145 274x140x147 (Duplex) - cm (204x264x104) (209x277x122) (254x246x152) (254x246x152) (284x246x152)

Shipping Weightlb. – Simplex (Duplex) 1,100 (2,260) 1,540 (3,080) 1,890 (3,780) 2,680 (5,360) 3,050 (6,100)kg – Simplex (Duplex) 499 (1,026) 699 (1,398) 858 (1,715) 1,216 (2,432) 1,384 (2,767)

Operating Weightlb. – Simplex (Duplex) 1,930 (3,860) 2,740 (5,480) 3,390 (6,780) 4,870 (9,740) 5,590 (11,180)kg – Simplex (Duplex) 876 (1,751) 1,243 (2,486) 1,538 (3,076) 2,209 (4,418) 2,536 (5,072)

Electrical Requirements 110 V / 60 Hz / 1 ph / 3 watts

*Approximate**Rating for metallic piping only. Plastic piping requires aeration due to line velocities.

189





Model Number VPES/VPAS-742 VPES/VPAS-748 VPES/VPAS-754 VPES/VPAS-760 VPES/VPAS-772Flow Rates

Good 245 280 350 420** N/ABetter 175 200 250 300 500**Best 105 120 150 180 300

Backwash Flow Rate 53 69 87 108 156Media (cubic feet) 30 40 50 60 100Capacity, Kgr CaCO3 (15 lb./CF) 900 1,200 1,500 1,800 3,000System Dimensions*Pipe Size 3” 4” 4” 4” 4”Column Size (D x H)

inch (cm) 42x72 (107x183) 48x72 (122x183) 54x72 (139x183) 60x72 (153x183) 72x72 (183x183)Brine Tank Size, inch 52x60 52x60 55x70 55x70 69x84*H x W x D Simplex - inch 112x55x63 118x62x76 121x65x82 125x70x88 129x79x100

(Duplex) - inch (116x132x71) (122x133x76) (123x158x82) (128x158x97) (131x158x100)Simplex - cm 284x140x160 300x157x193 307x165x208 318x178x224 328x201x254

(Duplex) - cm (295x335x180) (310x338x193) (312x401x208) (325x401x246) (333x401x254)Shipping Weight

lb.– Simplex (Duplex) 4,070 (8,140) 5,300 (10,600) 7,070 (14,140) 8,550 (17,100) 13,350 (26,700)kg – Simplex (Duplex) 1,847 (3,693) 2,405 (4,809) 3,207 (6,414) 3,879 (7,757) 6,056 (12,111)

Operating Weightlb. – Simplex (Duplex) 7,590 (15,180) 9,880 (19,760) 12,980 (25,960) 15,830 (31,660) 24,130 (48,260)kg – Simplex (Duplex) 3,443 (6,886) 4,482 (8,963) 5,888 (11,776) 7,181 (14,361) 10,946 (21,891)

Electrical Requirements 110 V / 60 Hz / 1 ph / 3 watts*Approximate**Rating for metallic piping only. Plastic piping requires aeration due to line velocities.

ORDERING INFORMATIONVP Series Softeners have extensive option packages. For ordering instructions, or additionalproduct information, please contact technical support at 800.875.7873 extension 5000.

In accordance with Siemens policy for continual product development andimprovements, we reserve the right to change the product informationwithin this literature at any time, without notice.

SOFTENERS

VP Series SoftenersFlow Rates from 20 to 420 gpm

190



STORAGE TANKS

Storage, Polyethylene, Conical-bottom, Gasket Lid w/Stand

The conical bottom polyethylene storage tank (55 to 2,000 gallons) insures

complete tank drainage for cleaning and sanitization operations. The tank is

constructed of virgin high-density FDA approved polyethylene and supported by

a structural steel stand painted with an acid resistant epoxy.

• Each tank includes seven factory installed polyethylene half coupling fittings

welded and tapered into the tank wall

• Polyethylene tank lid with neoprene flat gasket seal is bolted to the tank for air

tight access to the tank interior

• 3-position level controller, hydrophobic vent filter, nitrogen blanket system and

vacuum/pressure relief valve optional

SYSTEM SPECIFICATIONS*Catalog Number TPCC00055 TPCC00100 TPCC00200 TPCC00250 TPCC00350 TPCC00500 TPCC00750 TPCC01000

Tank Volume (gallons) . . . . . . . . 55 100 200 250 350 500 750 1000Construction Materials . . . . . . . . Virgin, high-density polyethylene that is FDA approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum Service Temp. . . . . . . Rated to 160°F (70°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System DimensionsDia. (D) x Overall Height (E) (inches) 28x64 32x59 35x86 45x68 46x88 57x86 68x88 72x104Wall Thickness . . . . . . . . . . . . . . 3/16" 1/4" 1/4" 5/16" 5/16" 3/8" 3/8" 3/8"

Shipping WeightIndustrial (lbs.) . . . . . . . . . . . . . . 75 160 200 250 350 425 540 640

Fittings (factory installed)Fill Fitting . . . . . . . . . . . . . . . . . . one-1"NPTF one-1"NPTF one-1.5"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTFReturn Fitting . . . . . . . . . . . . . . . one-1"NPTF one-1"NPTF one-1.5"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTFOverflow Fitting . . . . . . . . . . . . . one-1"NPTF one-1"NPTF one-1.5"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTFOutlet Fitting. . . . . . . . . . . . . . . . one-1"NPTF one-1"NPTF one-1.5"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTFVent Fitting . . . . . . . . . . . . . . . . . one-1"NPTF one-1"NPTF one-1"NPTF one-1"NPTF one-1"NPTF one-1"NPTF one-1"NPTF one-1"NPTFLevel/Sight Fittings. . . . . . . . . . . two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF

Catalog Number TPCC01500 TPCC02000

Tank Volume (gallons) . . . . . . . . 1500 2000Construction Materials . . . . . . . . Virgin, high-density polyethylene

that is FDA approvedMaximum Service Temp. . . . . . . Rated to 160°F (70°C)

System DimensionsD x H (inches) . . . . . . . . . . . . . . 79x99 86x103Wall Thickness . . . . . . . . . . . . . . 7/16" 7/16"

Shipping WeightIndustrial (lbs.) . . . . . . . . . . . . . . 875 1025

Fittings (factory installed)Fill Fitting . . . . . . . . . . . . . . . . . . one-2"NPTF one-2"NPTFReturn Fitting . . . . . . . . . . . . . . . one-2"NPTF one-2"NPTFOverflow Fitting . . . . . . . . . . . . . one-2"NPTF one-2"NPTFOutlet Fitting. . . . . . . . . . . . . . . . one-2"NPTF one-2"NPTFVent Fitting . . . . . . . . . . . . . . . . . one-1"NPTF one-1"NPTFLevel/Sight Fittings. . . . . . . . . . . two-.5" NPTF two-.5" NPTF

*Please contact Technical Support to obtain a drawing with exact fitting locations

191




STORAGE TANKS

Storage, Fiberglass, Dish-bottom, Closed Top w/Skirt

Constructed from premium, non-pigmented resin, which meets FDA regulations

for food handling, each tank is shipped with one welded outlet siphon valve

fitting, one 1/2" welded half coupling, one overflow welded half coupling and

four bulkhead fittings.

SYSTEM SPECIFICATIONS*Catalog Number TFDC0014A TFDC0024A TFDC0034A TFDC0045A TFDC0059A TFDC0073A TFDC0087A

Tank Volume (gallons) . . . . . . . . 145 245 345 445 590 735 875Construction Materials . . . . . . . . Non-pigmented premium resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System DimensionsD x H (inches) . . . . . . . . . . . . . . 30x62 32x85 38x85 42x89 48x92 48x110 48x129Wall Thickness . . . . . . . . . . . . . . 5/32" 5/32" 7/32" 7/32" 7/32" 7/32" 7/32"

Shipping WeightIndustrial (lbs.) . . . . . . . . . . . . . . 74 96 154 161 211 263 285

FittingsFill Fitting . . . . . . . . . . . . . . . . . . one-1" one-1" one-1.5" one-1.5" one-2" one-2" one-2"Return Fitting . . . . . . . . . . . . . . . one-1" one-1" one-1.5" one-1.5" one-2" one-2" one-2"Overflow Fitting . . . . . . . . . . . . . one-1" one-1" one-1.5" one-1.5" one-2" one-2" one-2"Outlet Fitting. . . . . . . . . . . . . . . . one-1" one-1" one-1.5" one-1.5" one-2" one-2" one-2"Vent Fitting . . . . . . . . . . . . . . . . . one-1" one-1" one-1" one-1" one-1" one-1" one-1"

Catalog Number TFDC0102A TFDC0151A TFDC0200A TFDC0250A

Tank Volume (gallons) . . . . . . . . 1020 1515 2000 2500Construction Materials . . . . . . . . Non-pigmented premium resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System DimensionsD x H (inches) . . . . . . . . . . . . . . 60x101 60x143 90x90 72x172Wall Thickness . . . . . . . . . . . . . . 5/32" 5/32" 3/16" 7/32"

Shipping WeightIndustrial (lbs.) . . . . . . . . . . . . . . 474 567 1290 820

FittingsFill Fitting . . . . . . . . . . . . . . . . . . one-2" one-2" one-2" one-2"Return Fitting . . . . . . . . . . . . . . . one-2" one-2" one-2" one-2"Overflow Fitting . . . . . . . . . . . . . one-2" one-2" one-2" one-2"Outlet Fitting. . . . . . . . . . . . . . . . one-2" one-2" one-2" one-3"Vent Fitting . . . . . . . . . . . . . . . . . one-1" one-1" one-1" one-1.5"


192



STORAGE TANKS

Storage, Polyethylene, Flat-bottom, Domed Top

Siemens flat bottom polyethylene storage tank (55 to 6,500 gallons) has a closed

cover design with a siphon valve fitting at the tank bottom for maximum

drainage. The seamless one piece construction is fabricated from FDA approved

virgin high density polyethylene.

• Each tank includes seven factory installed polyethylene half coupling fittings

welded and tapered into the tank wall

• Fume tight gasketed handway or manway is mounted on the top of the closed

tank to provide access to the interior

• 3-position level controller, hydrophobic vent filter, nitrogen blanket system and

vacuum/pressure relief valve optional

SYSTEM SPECIFICATIONS*Catalog Number TPFC00055 TPFC00110 TPFC00165 TPFC00220 TPFC00300 TPFC00500 TPFC00750 TPFC01000

Tank Volume (gallons) . . . . . . . . 55 110 165 220 300 500 750 1000Construction Materials . . . . . . . . Virgin, high-density polyethylene that is FDA approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum Service Temp . . . . . . . Rated to 160°F (70°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System DimensionsD x H (inches) . . . . . . . . . . . . . . 20x38 35x36 31x58 35x63 35x81 46x76 46x119 64x81Wall Thickness . . . . . . . . . . . . . . 3/16" 3/16" 3/16" 3/16" 3/16" 1/4" 1/4" 1/4"


Fittings (factory installed)Fill Fitting . . . . . . . . . . . . . . . . . . one-1"NPTF one-1"NPTF one-1.5"NPTF one-1.5"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTFReturn Fitting . . . . . . . . . . . . . . . one-1"NPTF one-1"NPTF one-1.5"NPTF one-1.5"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTFOverflow Fitting . . . . . . . . . . . . . one-1"NPTF one-1"NPTF one-1.5"NPTF one-1.5"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTFOutlet Fitting. . . . . . . . . . . . . . . . one-1"NPTF one-1"NPTF one-1.5"NPTF one-1.5"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTFVent Fitting . . . . . . . . . . . . . . . . . one-1"NPTF one-1"NPTF one-1"NPTF one-1"NPTF one-1"NPTF one-1"NPTF one-1"NPTF one-1"NPTFLevel/Sight Fittings. . . . . . . . . . . two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTFHandway . . . . . . . . . . . . . . . . . . one-8" one-5" one-8" one-5" one-16" one-16" one-16" one-16"

Catalog Number TPFC01500 TPFC02000 TPFC02500 TPFC03000 TPFC03600 TPFC04000 TPFC05000 TPFC06500

Tank Volume (gallons) . . . . . . . . 1500 2000 2500 3000 3600 4000 5000 6500Construction Materials . . . . . . . . Virgin, high-density polyethylene that is FDA approved . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Maximum Service Temp . . . . . . . Rated to 160°F (70°C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

System DimensionsD x H (inches) . . . . . . . . . . . . . . 64x121 64x144 95x89 95x105 86x156 95x140 120x151 120x144Wall Thickness . . . . . . . . . . . . . . 3/8" 3/8" 3/8" 7/8" 7/8" 1/2" 1/2" 7/8"


Fittings (factory installed)Fill Fitting . . . . . . . . . . . . . . . . . . one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTFReturn Fitting . . . . . . . . . . . . . . . one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTFOverflow Fitting . . . . . . . . . . . . . one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTF one-2"NPTFOutlet Fitting. . . . . . . . . . . . . . . . one-2"NPTF one-2"NPTF one-2"NPTF one-3"NPTF one-3"NPTF one-3"NPTF one-3"NPTF one-3"NPTFVent Fitting . . . . . . . . . . . . . . . . . one-1"NPTF one-1"NPTF one-1"NPTF one-1.5"NPTF one-1.5"NPTF one-1.5"NPTF one-1.5"NPTF one-1.5"NPTFLevel/Sight Fittings. . . . . . . . . . . two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTF two-.5" NPTFHandway . . . . . . . . . . . . . . . . . . one-8" one-16" one-16" one-16" one-16" one-16" one-16" one-16"


193




Terrapure® Storage Tanks are designed for the purest process water or chemistries.

They have a one-piece capsule design that provides for complete drainage.

• Viton®-gasketed 6" screw lid maintains nitrogen blanket pressure

• Supplied with six unique “no-profile” fittings ensure that there are no internal tank

protrusions to collect particles, and no crevices, welds or seams to support microbial

growth

• Totally enclosed, one-piece rotationally molded construction yields a rugged,

seamless, corrosion-free container suitable for an almost unlimited number of

solution, storage and dispensing applications

• All-plastic pedestal molded entirely of LPE (no metal reinforcement), capable of

supporting loads up to 4000 lb.

• Convenient “mousehole” provides easy access to the bottom center fitting

• Only 34" in diameter to fit through standard doors

• Can be steam cleaned (up to 190°F) and features materials that comply with FDA

regulations

STORAGE TANKS

Terrapure®1,2 Storage Tanks

SYSTEM SPECIFICATIONS*

Catalog Number TPPBWF125 TPSBWF125 TPPBWF250 TPSBWF250

Capacitygallons. . . . . . . . . . . . . . . . 125 125 250 250

Base Material . . . . . . . . . . . . . . . Plastic Steel Plastic Steel

System DimensionsA. . . . . . . . . . . . . . . . . . . . . . . . . 44" 44" 81" 81"B. . . . . . . . . . . . . . . . . . . . . . . . . 61" 67" 96" 104"C. . . . . . . . . . . . . . . . . . . . . . . . . 5/16" 5/16" 5/16" 5/16"

Shipping WeightTank (lbs.) . . . . . . . . . . . . . . . . . 50 50 81 81Pedestal (lbs.) . . . . . . . . . . . . . . 68 100 68 100*Please contact Technical Support to obtain a drawing with exact fitting locations1 Tank must be vented to atmosphere at all times2 Food grade construction complies with FDA regulations

1: 6" Viton® gasketed screw cap2: Painted Carbon Steel Stand3: Molded-in fitting flats (typical 8 places)

194



SYSTEM, EPV™ VALIDATABLE SKIDDED

EPV™ High Purity Water SystemsFlow Rates from 0.1 to 50 gpm

Siemens has developed a comprehensive water system product line tailored to clients

requiring validation level documentation. The Economical, Pre-Packaged, Validatable

High Purity Water Systems offer a complete water system package that meets the most

common quantity and quality requirements of the Laboratory, Medical, and BioPharm

markets.

Whatever level of water quality you require, there’s an EPV™ System to meet your

needs. Designed to produce flow rates from 0.1 to 50 gallons per minute (gpm), at the

point of use, these integrated, skid-mounted systems include pretreatment, make-up

water, storage and distribution equipment - everything you need to ensure a reliable,

cost-effective, supply of high-purity water, all with validation level documentation.

Standard Features:

• Developed for laboratory, biotechnology and pharmaceutical applications

• Multiple configurations including: Service DI, Non-recirculating Pretreatment,

Continuous Recirculating Pretreatment, and Hot Water Sanitizable

• Easy installation / skid mounted

• Complete documentation package including O&M with installation, start-up and

operation procedures, P&ID, Electrical Schematics, Installation and Operational

Qualification Verification Data Sheets, and Quality Assurance data reports

• Optional documentation includes: Dry Factory Acceptance Test, Wet Factory

Acceptance Test, Installation Protocol, Operational Protocol, and Performance

Qualification Protocol

Benefits:

• Fast delivery with pre-manufactured systems


• Meets or exceeds the following water quality requirements: USP Purified Water, CAP I,

ASTM I, 18.2 megohm-cm resistivity

• Validation Assistance available for execution of the

Installation/Operational/Performance Qualifications

195




SYSTEM, EPV™ VALIDATABLE SKIDDED

EPV™ Systems

196



SYSTEM, PreVUE® AND APEX™ VALIDATED SKIDDED

PreVUE® and APEX™ SystemsModular USP Purified Water Generation

Seven sizes—nominal flow rates range from 2 to 25 gpm. The PreVUE® and APEX™

systems are pre-engineered, totally integrated and automated biopharmaceutical

water purification systems. These characteristics help you expedite all phases of

planning, procuring and commissioning a new water purification system.

Pre-Engineered

• Prompt drawing submittals speed construction and planning

• Quick delivery keeps project moving fast

• cGMP design & construction assures quality Validation

• Fully functional wet FAT reduces start-up time

• Easily understood GAMP 4 formatted validation documentation

• Protocols submitted in advance of the equipment

Integrated Controls and Human Machine Interface (HMI)

• User friendly large color touch screen

Single-skid Design

• Fast installation saves time and money

• Smooth start-up

• Small footprint

Hot Water Sanitizable (optional on APEX™ system)

• Automated for reliable sanitization without chemicals

Proven Technologies

• RO and CDI-LX™ Systems for reliable, efficient and continuous operation

• Flexible configurations to meet your production needs

197





PreVUE® SystemsModular USP Purified Water Generation

PERFORMANCE SPECIFICATIONSModel 20 40 60 80 130 180 250

Maximum Product, gpm (m3/hr) 2.3 (.5) 4.4 (1) 6.6 (1.5) 8.8 (2) 15.3 (3.5) 19.8 (4.5) 28.8 (6.5)Nominal Product, gpm (m3/hr) 2.0 (.45) 4.0 (.9) 6.0 (1.4) 8.0 (1.8) 13.0 (2.9) 18.0 (4.1) 25.0 (5.7)Minimum Product, gpm (m3/hr) 1.5 (.3) 1.7 (.4) 3.4 (.8) 5.4 (1.2) 7.7 (1.7) 12.6 (2.9) 17.1 (3.9)Maximum Feed, gpm (m3/hr) 3.3 (.7) 6.5 (1.5) 9.7 (2.2) 13.1 (3) 22.7 (5.1) 29.3 (6.6) 42.7 (9.7)Maximum Drain, gpm (m3/hr) 10 (2.3) 12 (2.7) 15 (3.4) 20 (4.5) 30 (6.8) 40 (9.1) 60 (13.6)Nominal Recovery, % 64 68 68 68 68 68 68Inlet Pressure 60 to 95 psig regulated +/- 5 psigInlet Temperature 45 to 85°F (7.2 to 35°C)Note: Flow rates and recoveries are contingent upon feedwater quality. Pressure and temperature regulation required by customer. Contact your local Siemens WaterTechnologies sales representative for details.

PHYSICAL SPECIFICATIONSModel 20 40 60 80 130 180 250

Height 78” (198 cm) 78” (198 cm)Width 120” (305 cm) 120” (305 cm)Depth 60” (152 cm) 66” (168 cm)Shipping Weight, lbs (kgs) 3,300 (1497) 3,800 (1724) 4,400 (1996) 4,600 (2087) 6,300 (2858) 7,500 (3042) 8,600 (3901)Operating Weight, lbs (kgs) 4,200 (1905) 4,600 (2082) 5,500 (2495) 6,000 (2722) 8,400 (3810) 9,700 (4400) 11,900 (5398)Feed Water Inlet, Flanged 3/4” 1” 1” 1-1/2” 1-1/2” 2” 2”Product Outlet, Tri Clamp 1/2” 3/4” 3/4” 3/4” 1” 1” 1-1/2 ”Skid Drain, Flanged 2” 3”Break Tank Capacity 37 gallons (140 liters) 90 gallons (341 liters)

ELECTRICAL SPECIFICATIONSRequirements 480V, 3Ph

60 Hz

EQUIPMENT SPECIFICATIONSSofteners Fiberglass reinforced composite vessels with brass multiport valves (not hot water sanitizable)Activated Carbon Filter Stainless steel vessel, 100 psig ASME code with removable insulation jacketPretreatment Filter Stainless steel housing with 5.0 micron cartridge filterPretreatment UV Stainless steel chamber with 254 nm lampBreak Tank 316L stainless steel with bolted lidRO Pump Stainless steel vertical multi-stage centrifugal with VFDRO Vessels Fiberglass reinforced composite vessels, ASME codeRO Membranes Full fit thin film composite polyamide, hot water sanitizableCEDI Modules CDI-LX,™ hot water sanitizableFrame 304 Stainless steelControls PLC in NEMA 4X stainless steel enclosureHMI 10” color touch screen

OPTIONAL COMPONENTSSodium Bisulfite Injection Metering pump and solution tank with manual rate control, chlorine analyzer for alarmHardness Monitor Hardness analyzer integrated into control systempH Adjust Metering pump, solution tank and pH monitor with automatic rate control by control systemFinal UV Sanitary stainless steel chamber with 254 nm lampFinal Filter Sanitary stainless steel housing with 0.1 micron cartridge filter


198




APEX™ SystemsModular USP Purified Water Generation

PERFORMANCE SPECIFICATIONSModel 20 40 60 80 130 180 250

Maximum Product, gpm (m3/hr) 2.3 (.5) 4.4 (1) 6.6 (1.5) 8.8 (2) 15.3 (3.5) 19.8 (4.5) 28.8 (6.5)Nominal Product, gpm (m3/hr) 2.0 (.45) 4.0 (.9) 6.0 (1.4) 8.0 (1.8) 13.0 (2.9) 18.0 (4.1) 25.0 (5.7)Minimum Product, gpm (m3/hr) 1.5 (.3) 1.7 (.4) 3.4 (.8) 5.4 (1.2) 7.7 (1.7) 12.6 (2.9) 17.1 (3.9)Maximum Feed, gpm (m3/hr) 3.3 (.7) 6.5 (1.5) 9.7 (2.2) 13.1 (3) 22.7 (5.1) 29.3 (6.6) 42.7 (9.7)Maximum Drain, gpm (m3/hr) 10 (2.3) 12 (2.7) 15 (3.4) 20 (4.5) 30 (6.8) 40 (9.1) 60 (13.6)Nominal Recovery, % 64 68 68 68 68 68 68Inlet Pressure 60 to 95 psig regulated +/- 5 psigInlet Temperature 45 to 85°F (7.2 to 35°C)Note: Flow rates and recoveries are contingent upon feedwater quality. Pressure and temperature regulation required by customer. Contact your local Siemens WaterTechnologies sales representative for details.

PHYSICAL SPECIFICATIONSModel 20 40 60 80 130 180 250

Height 78” (198 cm) 78” (198 cm)Width 120” (305 cm) 120” (305 cm)Depth 60” (152 cm) 66” (168 cm)Shipping Weight, lbs (kgs) 3,300 (1497) 3,800 (1724) 4,400 (1996) 4,600 (2087) 6,300 (2858) 7,500 (3042) 8,600 (3901)Operating Weight, lbs (kgs) 4,200 (1905) 4,600 (2082) 5,500 (2495) 6,000 (2722) 8,400 (3810) 9,700 (4400) 11,900 (5398)Feed Water Inlet, Flanged 3/4” 1” 1” 1-1/2” 1-1/2” 2” 2”Product Outlet, Tri Clamp 1/2” 3/4” 3/4” 3/4” 1” 1” 1-1/2 ”Skid Drain, Flanged 2” 3”Break Tank Capacity 37 gallons (140 liters) 90 gallons (341 liters)

ELECTRICAL SPECIFICATIONSRequirements 480V, 3Ph 60 Hz

EQUIPMENT SPECIFICATIONSSofteners Fiberglass reinforced composite vessels with brass multiport valves (not hot water sanitizable)Activated Carbon Filter Stainless steel vessel, 100 psig ASME code with removable insulation jacketPretreatment Filter Stainless steel housing with 5.0 micron cartridge filterPretreatment UV Stainless steel chamber with 254 nm lampBreak Tank FRP dished bottomRO Pump Stainless steel vertical multi-stage centrifugal with VFDRO Vessels Fiberglass reinforced composite vessels, ASME codeRO Membranes Full fit thin film composite polyamide, hot water sanitizable (optional)CEDI Modules CDI-LX,™ hot water sanitizableFrame Polyurethane painted carbon steelControls PLC in NEMA 4 carbon steel enclosureHMI 10” color touch screen

OPTIONAL CONFIGURATIONSSulfite Dechlorination Metering pump and solution tank with manual rate control, chlorine analyzer for alarmHot Water Sanitization (APEX only) HWS option includes break tank heater, heater panel, and HWS membranesPermeate Piping (APEX only) Stainless steel piping (from RO/CEDI permeate)

OPTIONAL COMPONENTSSodium Bisulfite Injection Metering pump and solution tank with manual rate control, chlorine analyzer for alarmHardness Monitor Hardness analyzer integrated into control systempH Adjust Metering pump, solution tank and pH monitor with automatic rate control by control systemFinal UV Sanitary stainless steel chamber with 254 nm lampFinal Filter Sanitary stainless steel housing with 0.1 micron cartridge filter


199




TEMPORARY MOBILE WATER TREATMENT

Mobile DemineralizationFlow Rates from 50 to 600 gpm

High capacity, multiplecombinations for

versatility of applications

For over 30 years, Siemens has met the short-term and emergency treated water needs of our customers using our mobile demineralizer (DI) trailers. These trailers are thetreatment of choice for zero-discharge applications and seasonal treated water needs. Areliable and extensive service network, an ever-expanding trailer fleet and strategicallylocated regeneration facilities allow Siemens Water Technologies to effectively serve ourlarge North American customer base.

Using mobile DI services, customers meet their treated water needs without on-site wastegeneration, hazardous chemical handling and capital investments. The following types oftrailers allow Siemens to match our customers’ exact capacity and flow needs with thecorrect trailer:• MT 3000 is our three-vessel trailer with up to 3 million grain capacity and flows to 200 gpm.• MT 4500 is our four-tank trailer that includes a weak-base anion vessel. With flows of

200 gpm and capacities up to 4 million grains on certain feedwaters, this trailer isideally suited for feedwaters with high free mineral acidity.

• MT 5000 is our largest mobile DI trailer with a nominal 5 million grain capacity. This isa two-train trailer with a flow of 300 gpm per train (600 gpm total).

• MT 5500 is a our six-vessel trailer with a nominal 5 million grain capacity. Thistrailer may be loaded in a variety of configurations to meet specific treatmentneeds at flow rates to 600 gpm.

Generally used for short-term or emergency needs, mobile demineralizer trailers havethe maximum versatility you need. These trailers are specially designed using cost-effective configurations allowing specific match to your site and feedwater conditions.They provide a convenient source of water for pilot facilities, system scale-ups andcommercialization product testing. They are ideal for use during start-ups, preventativemaintenance and breakdowns of existing equipment. They provide large quantities ofhigh-purity water rapidly with no on-site waste.

Very effective for lowercapacity, lower flow rate andlow TDS water applications

(especially for power industry)

Very effective for lowalkalinity / high FMA(free mineral acidity)

applications

Highest flow rate pertrailer in the industry,completely automatic

two-train system

SPECIFICATIONSSeries MT 3000 MT 4500 MT 5000 MT 5500

Nominal Exchange Capacity (kgr)* . . . . . . . . . . . . . . 3,000 4,500 5,000 5,000

Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Tanks/Trailer 4 Tanks/Trailer 6 Tanks/Trailer 6 Tanks/Trailer

Vessel Composition. . . . . . . . . . . . . . . . . . . . . . . . . . Carbon Steel Carbon Steel Carbon Steel Carbon Steel

Vessel Lining . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vulcanized Rubber Vulcanized Rubber Vulcanized Rubber Vulcanized Rubber

ASME Code. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Yes Yes Yes Yes

Flow Rate (gpm) Min. / Max.. . . . . . . . . . . . . . . . . . . 50/200 50/200 50/600 50/400

Inlet Pressure (psig) Min. / Max. . . . . . . . . . . . . . . . . 45/100 50/100 40/100 40/100

Inlet / Outlet Hose Connections . . . . . . . . . . . . . . . . 2-1/2" Minimum 2-1/2" Minimum 2-1/2" Minimum 2-1/2"– 4" Minimum

Weight (lbs.) Shipping / Operating . . . . . . . . . . . . . . 35,000/42,000 47,000/62,000 60,000/84,500 58,000/84,500

Dimensions – Width x Length x Height . . . . . . . . . . . 8’ x 32’ x 13.5’ 8’ x 32’ x 13.5’ 8’ x 48’ x 13.5’ 8.5’ x 48’ x 13.5’

Trailer Electrical Requirements . . . . . . . . . . . . . . . . . . . 115V, Single Phase, 60 Hz, 10 Amps

Heater Electrical Requirements . . . . . . . . . . . . . . . . . . . (2) 115V, Single Phase, 60 Hz, 30 Amps

Instrumentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Flow Indicator and Totalizer on Main Header

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Pressure Gauges and Sample Ports

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Conductivity Meters on Primary and Polish Outlet Ports

Feedwater Requirements . . . . . . . . . . . . . . . . . . . . . . . . Turbidity <3 NTU

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Free Chlorine <0.25 ppm

Typical Water Service Quality . . . . . . . . . . . . . . . . . . . . Conductivity: 0.1 - 1.0 µS/cm and Silica Leakage: <20 ppb

* Based on a 1µS/cm end point.

200




Mobile Clarification1.5 MGD Maximum

SPECIFICATIONS

Design Capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 MGD, design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.5 MGD, maxOperating Weight – Dimensions (LxWxH) 48' x 8'6" x 13' 6" . 95,000 lbs.

Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 feetWidth . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 feet, 6 inchesHeight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 feet, 6 inches

Coagulation Tank HRT @ design . . . . . . . . . . . . . . . . . . . . . . 1.7 minutesInjection Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.7 minutesMaturation Tank . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6.0 minutesSettling Tank Load Rate @ design . . . . . . . . . . . . . . . . . . . . . 30 gpm/ft2

Electrical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480V, 3ph, 100 ampsMechanical Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8” flange inlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10” flange outlet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4” flange drainInstrument–Influent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Raw water turbidity meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Raw water pH meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Raw water flow meter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Coagulated water pH meterInstrument–Effluent . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Clarified water turbidity meterControl Panel–PLC-based . . . . . . . . . . . . . . . . . . . . . . . . . . . . NEMA 12 UL® label . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Operator interface display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Signal isolators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surge protectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Circuit breakers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . I/O terminal strips

The mobile clarifier unit from Siemens Water Technologies is a self-contained trailer-

mounted system capable of treating highly turbid water (>1000 NTU). The system is

capable of producing extraordinarily clear effluent (0.5-1.0 NTU) with remarkable stability

under varying raw water conditions.

The Actiflo® clarification process from Kruger Inc. uses microsand as a seed to enhance

floc formation and increase settling rate. The microsand promotes production of higher

quality effluent than other types of clarification systems and is ideally suited for

treatment of raw water that is traditionally difficult to treat, such as: high or low

turbidity, high color/TOC, cold water, high algae, colloidal silica. Its stability, ease of

operation and small footprint make the clarifier trailer ideal for clarifying 750 gpm of

rapidly fluctuating raw water sources, in limited space and in frequent start-up/shut-

down applications. The system provides clear effluent water in even the most

demanding raw water conditions.

Mobile systems contain instrumentation and equipment for a fully automatic and

monitored operation. Chemical feed skids and fail safe shut-down controls are also

included to ensure efficient and reliable operation.

When using Siemens mobile systems, we guarantee quality, quantity and cost of

produced water. All mobile equipment is backed with an inventory of standard critical

components. Our skilled service team is on-call 24 hours per day to meet your needs. We

have over 80 local service facilities across the United States to service your needs.

201





Mobile Reverse Osmosis (RO)

The Mobile RO unit from Siemens Water Technologies is a self-contained system that

employs pretreatment and reverse osmosis (RO) capability in a single trailer. The system

is capable of producing 200 gpm of low conductivity product water under a variety of

raw water conditions.

The versatile 200 gpm Mobile RO trailer can provide multi-media, carbon, or softening

pretreatment consistent with the raw water’s impurities. The trailer can be configured

as a 90 gpm double-pass unit for applications requiring extensive DI polishing. This

approach can reduce DI polishing costs by as much as 80-90%.

Because the RO unit combines pretreatment and RO in a single trailer, installation costs

and response times are reduced significantly. This means lower produced water costs

and minimum downtime for Siemens Water Technologies customers. Mobile systems

contain instrumentation and equipment for fully automatic and monitored operation.

Chemical feed skids and fail-safe shut-down controls are also included to ensure

efficient and reliable operation.

Siemens backs its mobile systems with a guarantee of quality, quantity and cost of

produced water. All mobile equipment is supported by an inventory of standard critical

components. A skilled service team is on-call 24 hours per day to respond to your needs.

SPECIFICATIONS

Dimensions (LxWxH) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48’ x 8.5’ x 13.5’Weight (Shipping/Operating) . . . . . . . . . . . . . . . . . . . . . . . . . . . 55,000 lbs. Max./70,000 lbs.Feed Water (gpm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133-506Product Water (gpm) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90-200Drain (gpm)

Concentrate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33-66Backwash . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80-240

Pressure (psig) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50-90Electrical Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 480 VAC/3 ph/200 AmpAir Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 SCFM @ 80 psigService Connections (150# PVC Flange)

Inlet/Outlet/Drain . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4”/4”/4”Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NEMA 4X w/Allen-Bradley® SLC-5/03

PLC Remote I/O – PLC InterfacePretreatment Vessels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 x 54" dia. (45-60 ft3) each

Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Carbon, filter media (various), resinFlexRO®-100 Units

Membranes (3:2:1 Array) . . . . . . . . . . . . . . . . . . . . . . . . . 24 ea (TFC or CA)Prefilter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 316 SS, 12 round x 3 highPump . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 HP Multi-stage

InstrumentationFlow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Product/ConcentrateSpecific Conductance . . . . . . . . . . . . . . . . . . . . . . . . . . . Feed/ProductpH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FeedORP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . FeedPressure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Various

202




PreFlex® Pretreatment Units

PreFlex® pretreatment units from Siemens Water Technologies are modular in design,pre-plumbed, self-contained, skid-mounted units used in our mobile business. PreFlex®units are designed to the highest engineering standards with ASME code tanks, NEMA4X panels and pneumatically actuated solenoid valves enabling them to be used in awide variety of applications and environments including heavy industry.

Configured in parallel or series, these units can be combined with other Siemens mobileproducts for a fully integrated water treatment system meeting your plant’s flow andquality requirements. Units may be site or trailer installed with up to six PreFlex® 54units per trailer.

Siemens Water Technologies maintains a large inventory of PreFlex® units and othermobile assets as we continue to serve a large number of companies who depend uponSiemens’ mobile capabilities and extensive service network for their short-term,emergency, seasonal, pilot and temporary water treatment needs.

PreFlex® units are also used for various stand-alone pretreatment applicationsincluding:

• Media filtration • Activated carbon filtration

• Softening • Dealkalization

• Iron and manganese removal • TOC reduction

PreFlex® units are generally used for temporary needs including:

• Capacity expansions • Pilot plant water

• Interim usage until a permanent system is installed • Process water quality changes

• Scheduled shutdowns • Seasonal water needs

• Emergency water usages • Feedwater quality changes

• Existing demineralization system environmental salt discharge problems

PreFlex 54 PreFlex 84

ACF MMF SOFT ACF MMF SOFT

Service Flow Rate (gpm) - Min./Max. 40/160 40/120 40/240 80/380 80/300 80/500Backwash Flow (gpm). . . . . . . . . 160 240 80 380 540 200Media Volume (Ft3) . . . . . . . . . . . 45 45 60 120 120 150Exchange Capacity @ 10#/ft3

Salt Dosage (kgr) . . . . . . . . . N/A N/A 1,500 N/A N/A 3,750Operating Pressure (psi) - Min./Max. 20 / 100 20 / 100Pressure Drop (psig) . . . . . . . . . . 5 - 15 5 - 15Operating Temp. (°F), Max. . . . . 105 105Service Connections - Sch. 80 PVCInlet / Outlet / Waste (inches). . . 4/4/4 6/6/4 or 6/6/6Weight (lbs.) - Shipping . . . . . . . . 2,700 2,700 2,700 7,700 7,700 7,700

- Operating . . . . . . . . . . . . 9,100 12,500 10,200 24,600 32,200 27,500Dimensions. . . . . . . . . . . . . . . . . . 54" W x 73" D x 97" H 92" W x 108" D x 128" HElectric Requirements . . . . . . . . . 120 V / 1 ph / 60 Hz - 10 AmpsType. . . . . . . . . . . . . . . . . . . . . . . Carbon Steel, ASME Code, 100 psiInternal Lining . . . . . . . . . . . . . . . Epoxy/PolyurethaneValves / Piping / Internals. . . . . . Butterfly Isolation & Solenoid Valves / Sch. 80 PVC / SS 316 Bottom. . . . . . . . . . . . . . . . . . . . . . . . . . . & PVC Top Distribution

Air Requirements . . . . . . . . . . . . . 10 SCFM (Instantaneous) @ 80 psigControl Panel . . . . . . . . . . . . . . . . NEMA 4X, Remote I/O Solenoid PanelGauges. . . . . . . . . . . . . . . . . . . . . In / Out PressureApplications . . . . . . . . . . . . . . . . . Activated Carbon (ACF) Fe and Mn Removal Softening

Multimedia (MMF) TOC Removal Dealkalization

203




SPECIFICATIONSFlexTrex® 36 FlexTrex® 42 FlexTrex® 48 Super 30

Vessel Size . . . . . . . . . . . . . . . . . . . . . . . 36" x 48" Side Sheet 42" x 48" Side Sheet 48" x 60" Side Sheet 36" dia. X 54" Side SheetMedia Volume (ft3) . . . . . . . . . . . . . . . . . 30 42 60 30Service Flow Rate (gpm) Min/Max. . . . . 20 / 100 35 / 150 35 / 250 20 / 100Pressure Drop (psig) at 77°F . . . . . . . . . Approx. 15 at 100 gpm Approx. 15 at 150 gpm Approx. 10 at 250 gpm Approx. 25 at 100 gpmResin . . . . . . . . . . . . . . . . . . . . . . . . . . . SAC/SBA/MB SAC/SBA/MB SAC/SBA/MB SAC/SBA/MBExchange Cap. (kgr) . . . . . . . . . . . . . . . 750/420/240 1050/588/336 1500/840/480 750/420/240Operating Pressure (psi) Min/Max. . . . . 20/100 20/100 20/100 20/100Operating Temperature (˚F) Max. . . . . . 100 140 (SS only) 100 100Service Connections . . . . . . . . . . . . . . . 2" or 3" 3" 4" 2"Vessel Specifications . . . . . . . . . . . . . . .

Type . . . . . . . . . . . . . . . . . . . . . . . . . Carbon Steel 316L SS Carbon Steel Carbon SteelInternal Lining . . . . . . . . . . . . . . . . . . Vulcanized Rubber Lined None Vulcanized Rubber Lined Sprayed & Baked PVC

Piping/Internals . . . . . . . . . . . . . . . . . . . . Sch. 80 PVC Sch. 80 PVC / 316 SS Sch. 80 PVC Sch. 80 PVCWeight (lbs.) Shipping/Operating . . . . . . 2,000 / 3,400 3,500 / 4,200 5,000 / 8,000 2,000 / 3,400Dimensions (WxDxH) . . . . . . . . . . . . . . . 40"x42"x78" 42"x49"x90" 50"x61"x92" 36"x36"x76" Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . Lifting Lugs & Fork Lift Ports Provided -- Units Movable By Pallet Jack

Media Options: . . . . . . . . . . . . . . . . . . . . . . .

Strong Acid Cation Resin (SAC) Weak Base Anion Resin (WBA) Organic Scavenging MediaStrong Base Anion Resin (SBA) Mixed Bed Resin (MB) Colloidal Removal MediaWeak Acid Cation Resin (WAC) Activated Carbon


FlexTrex® Deionization UnitsFlow Rates to 250 gpm

FlexTrex® deionization units from Siemens Water Technologies are skid-mounted ionexchange units designed to treat flows ranging from 20 to 250 gpm per unit. FlexTrex®units have quick disconnects and can be installed and brought on-line in a very shortperiod of time using flexible hoses.

Regenerated off-site, these portable units do not use hazardous chemicals, do notgenerate any wastewater and are ideal for polishing raw or RO permeate water. Incertain instances, FlexTrex® units are an economical alternative to service deionizationbottles. These ASME tanks, with their rugged design, small footprint and ability to treathigh flow rates, are of tremendous advantage in many instances. With their 316 SSconstruction, FlexTrex® 42 units treat water up to 140°F and are ideal for short or long-term condensate polishing applications.

FlexTrex® units can be configured in parallel or series and combined with other Siemensproducts for a fully integrated water treatment system to meet your plant’s specific flowand quality requirements. They are serviced and exchanged by Siemens’ extensive andreliable service network, which is available 24 hours a day. Our regeneration facilitiesand experienced service personnel ensure you receive an uninterrupted, consistentsupply of treated water of the quality and quantity you require.

Siemens can add controls and instrumentation to these units on an as-needed basis tomeet your application needs.

FlexTrex® modules are generally used for:

• Polishing • Pilot plant water needs

• Process water quality changes • Chlorine or chloramine removal

• Scheduled shutdowns • Seasonal water needs

• Emergency water usages • Feedwater quality changes

• Condensate polishing • Softening

• Interim usage until a permanent system is installed

204




FlexRO® Reverse Osmosis Units

FlexRO® reverse osmosis units from Siemens Water Technologies are skid-mounted,self-contained, 100 and 125 gpm reverse osmosis units. These units feature arrayskids with:

• SS cartridge filter housing

• TEFC high efficiency motor

• Multistage high pressure pump

• State-of-the-art instrumentation

• NEMA 4X 480 VAC motor, starter panel with a 120 VAC step-down transformer

• Separate NEMA 4X control panel with PLC

With their rugged, modular design, FlexRO® units are convenient to install, connect,startup and service. These units may be site installed and operated as stand-aloneunits or installed inside a trailer (4 FlexRO® 100 units per trailer) and controlled bythe system panel. Combined with other Siemens Water Technologies mobile assets,FlexRO® units are used to assemble fully integrated water treatment systemsdesigned to customers’ specific treated water quality and flow needs. These unitsare economical even on low TDS feedwater. Operating as a pretreatment todeionizers (DI), these units significantly reduce consumption of hazardouschemicals, labor and waste; extend DI service cycles; and improve treated waterquality. Units may be installed in parallel for single pass or in series for double passapplications. Both thin film composite (TFC) and cellulose acetate (CA) membranesmay be used in these units. Large inventories of mobile units, coupled with anextensive service network enable us to respond quickly to our customers’ seasonal,emergency, pilot or other short-term water treatment needs.

SPECIFICATIONSFlexRO 100 Units: FlexRO 100 FlexRO 125

Flow Rate @ 59°F gpmPermeate / Concentrate / Feed . . . . . . . . . . . . . 100/33/133 125/42/167

Membranes (TFC or CA*)Array / Quantity . . . . . . . . . . . . . . . . . . . . . . . . . . 3:2:1 (4M) / 24 4:2:1 (4M) / 28

Starter Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NEMA 4X -- Includes 120 VAC step-down transformerMotor Size, HP / Amps . . . . . . . . . . . . . . . . . . . . 50/65Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 460 VAC / 3 ph / 60 Hz

Control Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NEMA 4X with PLCOption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Remote I/O Panel / PLC Interface

Connections (Schedule 80 PVC)Feed / Permeate / Concentrate . . . . . . . . . . . . . 3" / 3" / 1.5" Flanged 4" / 3" / 1.5" Flanged

Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16' L X 3' D X 6'10" H 17" L x 3'4" D x 8'1" HWeight (lbs.) Shipping / Operating. . . . . . . . . . . . . 5,200 / 6,500 5,300 / 6,800Pressure Gauge. . . . . . . . . . . . . . . . . . . . . . . . . . . Cartridge Filter In/Out; Pump Discharge (Feed to Membrane); Interstage; Concentrate; PermeateTemperature Gauge . . . . . . . . . . . . . . . . . . . . . . . . FeedFlow Indicator. . . . . . . . . . . . . . . . . . . . . . . . . . . . . Permeate and ConcentrateConductivity Analyzer. . . . . . . . . . . . . . . . . . . . . . . Feed and PermeateCartridge Filter Housing . . . . . . . . . . . . . . . . . . . . . SS, 12 Round x 3 High*Flows and recovery rates will be different with cellulose acetate membranes.

205




ULTRAVIOLET STERILIZERS

ZCS Series

CSL-Series Ultraviolet Lights

SP, SL and MP-2 Series Ultraviolet Lights

Ultraviolet Light Sterilizers

UV radiation can be used as a pretreatment or polishing step to destroy bacteria and to

reduce total organics. Low pressure mercury discharge lamps are used to generate the

UV energy, emitted at either 254 or 185 nm. The UV energy emitted at 254 nm is used

as a non-chemical method for destroying microorganisms by altering the genetic

material, and rendering them unable to reproduce. The shorter, and therefore more

powerful 185 nm energy is used for the effective reduction of organics, commonly

referred to as TOC (total oxidizable carbon).

The UV units are manufactured from 304 stainless steel. The UV light rays produced by

each lamp efficiently pass through the quartz sleeves and into the surrounding liquid

flowing through the UV treatment chamber. Stainless baffles are included in the

treatment chamber to induce turbulence and prevent channeling, maximizing the

exposure to ultraviolet radiation.

SPECIFICATIONS FOR ZCS SERIES 254nm ULTRAVIOLET STERILIZERSModel Number SP-1 SP-2 SL-10A SL-1 MP-2-SL

Catalog Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZCSL00110 ZCSL00210 ZCSL00410 ZCSL01210 ZCSL02410No of UV lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 1 1 2Max Design Flow (gpm)

Clear water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 3 10 20RO/DI water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 4 12 24

Standard Operating Press (psig)(8.3 bar) . . . . . . . . . . . 120 120 120 120 120Inlet/Outlet Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 3/8" NPTF 3/8" NPTF 1/2"150# flange 1" 150# flange 1.5" 150# flangeDimensions (LxWxH) inch . . . . . . . . . . . . . . . . . . 14x4x5 14x4x5 10x6x19 14x7x38 38x7x21

cm . . . . . . . . . . . . . . . . . . . 36x9x13 36x9x13 26x16x48 36x17x97 97x18x53

Model Number CSL-4R CSL-6R CSL-8R CSL-12R

Catalog Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZCSL05010 ZCSL07810 ZCSL10010 ZCSL15610No of UV lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 6 8 12Max Design Flow (gpm)

Clear water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 60 80 130RO/DI water . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50 78 100 156

Standard Operating Press (psig)(8.3 bar) . . . . . . . . . . . 120 120 120 120Inlet/Outlet Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 2" 150# flange 2" 150# flange 3" 150# flange 3" 150# flangeDimensions (LxWxH) inch . . . . . . . . . . . . . . . . . . 41x11x21 41x11x21 45x12x28 45x12x28

cm . . . . . . . . . . . . . . . . . . . 104x28x53 104x28x53 104x28x53 114x33x67

UV STERILIZERS SPARE PARTSModel Number SP-1 SP-2 SL-10A SL-1 MP-2-SL

Replacement Lamp 254nm (dual ended) . . . . . . . . . . . ZCSPL3010 ZCSPL3011 ZCSPL3050 ZCSPL3084 ZCSPL3084 Validated Lamp 254nm (dual ended) . . . . . . . . . . . . . . . — — ZCSPL16714 ZCSPL16676 ZCSPL16676Replacement Magnetic Ballast. . . . . . . . . . . . . . . . . . . . ZCSPB3318 ZCSPB3910 ZCSPB4035 ZCSPB4035 ZCSPB3354Replacement Quartz Sleeve (dual ended). . . . . . . . . . . ZCSPQ3110 ZCSPQ3110 ZCSPQ3150 ZCSPQ3184 ZCSPQ3184

Model Number CSL-4R CSL-6R CSL-8R CSL-12R

Replacement Lamp 254nm (dual ended) . . . . . . . . . . . ZCSPL3084 ZCSPL3084 ZCSPL3084 ZCSPL3084Replacement Lamp 254 (single ended) . . . . . . . . . . . . . ZCSPL17491 ZCSPL17491 ZCSPL17491 ZCSPL17491Validated Lamp 254nm (dual ended) . . . . . . . . . . . . . . . ZCSPL16676 ZCSPL16676 ZCSPL16676 ZCSPL16676Validated Lamp 254nm (single ended). . . . . . . . . . . . . . ZCSPL18059 ZCSPL18059 ZCSPL18059 ZCSPL18059Replacement Magnetic Ballast. . . . . . . . . . . . . . . . . . . . ZCSPB3354 ZCSPB3354 ZCSPB3354 ZCSPB3354Replacement Electronic Ballast . . . . . . . . . . . . . . . . . . . ZCSPB16518 ZCSPB16518 ZCSPB16518 ZCSPB16518Replacement Quartz Sleeve (dual ended) . . . . . . . . . . . ZCSPQ3184 ZCSPQ3184 ZCSPQ3184 ZCSPQ3184Replacement Quartz Sleeve (single ended) . . . . . . . . . ZCSPQ18347 ZCSPQ18347 ZCSPQ18347 ZCSPQ18347

NOTE: Thermistors, optical sensors, sanitary connections, ozone destruction, hot temperature units, light traps, and remote electrical controls are available. Please contact Technical Support for detailed information. Mating flanges are not supplied with units.

206




ZHX Series

SPECIFICATIONS

Model Number . . . . . . . . . . . . . . . . . . . . . . . . HX02BDS HX02BDL HX02DDS HX02CDLCatalog Number . . . . . . . . . . . . . . . . . . . . . . . ZHXN04520 ZHXN09020 ZHXN11520 ZHXN15020No of UV Lamps . . . . . . . . . . . . . . . . . . . . . . . . 2 2 2 2Max Flow (gpm) RO/DI . . . . . . . . . . . . . . . . . . 45 90 115 150Std. Oper Press (psig) . . . . . . . . . . . . . . . . . . . 150 150 150 120Inlet/Outlet Connection . . . . . . . . . . . . . . . . . . . 2” RF Flange 2” RF Flange 3” RF Flange 3” RF FlangeDimensions (inches) . . . . . . . . . . . . . . . . . . . . . 38x12x15 68x12x15 40x16x22 68x10x22

Model Number . . . . . . . . . . . . . . . . . . . . . . . . HX02DDL HX04CDL HX06CDLCatalog Number . . . . . . . . . . . . . . . . . . . . . . . ZHXN22020 ZHXN30020 ZHXN40520No of UV Lamps . . . . . . . . . . . . . . . . . . . . . . . . 2 4 6Max Flow (gpm) RO/DI . . . . . . . . . . . . . . . . . . 220 300 405Std. Oper Press (psig) . . . . . . . . . . . . . . . . . . . 150 120 120Inlet/Outlet Connection . . . . . . . . . . . . . . . . . . . 3” RF Flange 4” RF Flange 4” RF FlangeDimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . 68x12x24 68x10x22 68x10x22

The next generation of UV systems utilize a new low pressure high intensitylong-life bulb that greatly increases the capacity per unit. This technologyrequires up to 4 times less bulbs to accommodate the same flow as original lampdesigned systems.• Hot water sanitizable with UV detector to 121˚C in place• Disinfection 30,000 uW-s/cm2

• 240V/50Hz or 60Hz• 9,000 hour life at 80% intensity end of life• Temperature and UV combined in one detector package (option)• Option for NIST traceable optical detector• Option for UL Listed

SPARE PARTS

HX - UV Sterilizer Spare Parts (30" for 45 and 115 gpm models,60" for all others)

Description . . . . . . . . . . . . . . . . . . . . . . . . . . . Catalog Number254nm Lamp 30" . . . . . . . . . . . . . . . . . . . . . . . ZCSPLGOLD-S254nm Lamp 60" . . . . . . . . . . . . . . . . . . . . . . . ZCSPLGOLD-L254nm Validated Lamp 30" . . . . . . . . . . . . . . . ZCSPLCREAM-S254nm Validated Lamp 60" . . . . . . . . . . . . . . . ZCSPLCREAM-L185nm Lamp 30" . . . . . . . . . . . . . . . . . . . . . . . ZCSPLSILVER-S185nm Lamp 60" . . . . . . . . . . . . . . . . . . . . . . . ZCSPLSILVER-L185nm Validated Lamp 30" . . . . . . . . . . . . . . . ZCSPLTAN-S185nm Validated Lamp 60" . . . . . . . . . . . . . . . ZCSPLTAN-L30" Quartz Sleeve . . . . . . . . . . . . . . . . . . . . . . ZCSPQ318460" Quartz Sleeve . . . . . . . . . . . . . . . . . . . . . . ZCSPQ3198Ballasts Electronic . . . . . . . . . . . . . . . . . . . . . . ZCSPB416341Compression nuts . . . . . . . . . . . . . . . . . . . . . . ZCSPM19685O-Rings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZCSPM4253

Additional higher flow models are available. Contact Technical Support.

207





ZCT Series

SPECIFICATIONS FOR ZCT SERIES 185nm ULTRAVIOLET LIGHTSModel Number SL-1 TOC MP-2-SL TOC CSL-4R TOC CSL-6R TOC CSL-8R TOC CSL-12R TOC

Catalog Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZCTOOO310 ZCTOOO510 ZCTOO1110 ZCTOO1710 ZCTOO2210 ZCTOO3510No of UV lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 2 4 6 8 12Max Design Flow (gpm) RO/DI water . . . . . . . . . . . . . . 3 5 11 17 22 35Design Flow Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 5 11 17 22 35Standard Operating Press (psig) . . . . . . . . . . . . . . . . . . 120 120 120 120 120 120Inlet/Outlet Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 1" 150# flange 1.5"150# flange 2" 150# flange 2" 150# flange 2” 150# flange 3” 150# flangeDimensions LxWxH inch . . . . . . . . . . . . . . . . . . . . . . . 14x7x38 38x7x21 41x11x21 41x11x21 41x11x21 45x13x27

cm . . . . . . . . . . . . . . . . . . . . . . . . 36x 18x97 97x18x53 104x28x53 104x28x53 104x28x53 114x33x69Model Number CSL-8R/60 TOC CSL-10R/60 TOC CSL-12R/60 TOC CSL-16R/60 TOC CSL-20R/60 TOC CSL-24R/60 TOC

Catalog Number . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZCTOO4510 ZCTOO5810 ZCTOO7010 ZCTOO9010 ZCTO11510 ZCTO14010No of UV lamps . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 10 12 16 20 24Max Design Flow (gpm) RO/DI water . . . . . . . . . . . . . . 45 58 70 90 115 140Design Flow Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 58 70 90 115 140Standard Operating Press (psig) . . . . . . . . . . . . . . . . . . 120 120 120 120 120 120Inlet/Outlet Connection. . . . . . . . . . . . . . . . . . . . . . . . . . 4" 150# flange 4" 150# flange 4" 150# flange 4" 150# flange 4” 150# flange 4” 150# flangeDimensions LxWxH inch . . . . . . . . . . . . . . . . . . . . . . . 69x13x27 69x13x27 69x13x27 69x13x27 69x13x27 69x13x27

cm . . . . . . . . . . . . . . . . . . . . . . . . 175x33x69 175x33x69 175x33x69 175x61x66 175x61x66 175x61x66UV LIGHT SPARE PARTS

Model Number SL-1 TOC MP-2-SL TOC CSL-4R TOC CSL-6R TOC CSL-8R TOC CSL-12R TOC

Replacement Lamp 185nm (dual ended). . . . . . . . . . . . ZCSPL3087 ZCSPL3087 ZCSPL3087 ZCSPL3087 ZCSPL3087 ZCSPL3087Replacement Lamp 185nm (single ended) . . . . . . . . . . ZCSPL18063 ZCSPL18063 ZCSPL18063 ZCSPL18063ValidatedLamp 185nm (dual ended) . . . . . . . . . . . . . . . . . . . . . . . ZCSPL16678 ZCSPL16678 ZCSPL16678 ZCSPL16678 ZCSPL16678 ZCSPL16678ValidatedLamp 185nm (single ended) . . . . . . . . . . . . . . . . . . . . . ZCSPL18062 ZCSPL18062 ZCSPL18062 ZCSPL18062Replacement Magnetic Ballast. . . . . . . . . . . . . . . . . . . . ZCSPB4035 ZCSPB3101 ZCSPB3354 ZCSPB3354 ZCSPB3354 ZCSPB3354Replacement Electronic Ballast . . . . . . . . . . . . . . . . . . . ZCSPB16518 ZCSPB16518 ZCSPB16518 ZCSPB16518Replacement Quartz Sleeve (dual ended) . . . . . . . . . . . ZCSPQ3184 ZCSPQ3184 ZCSPQ3184 ZCSPQ3184 ZCSPQ3184 ZCSPQ3184Replacement Quartz Sleeve (single ended) . . . . . . . . . ZCSPQ18347 ZCSPQ18347 ZCSPQ18347 ZCSPQ18347

Model Number CSL-8R/60 TOC CSL-10R/60 TOC CSL-12R/60 TOC CSL-16R/60 TOC CSL-20R/60 TOC CSL-24R/60 TOC

Replacement Lamp 185nm (dual ended). . . . . . . . . . . . ZCSPL3095 ZCSPL3095 ZCSPL3095 ZCSPL3095 ZCSPL3095 ZCSPL3095Replacement Lamp 185nm (single ended) . . . . . . . . . . ZCSPL17498 ZCSPL17498 ZCSPL17498 ZCSPL17498 ZCSPL17498 ZCSPL17498ValidatedLamp 185nm (dual ended) . . . . . . . . . . . . . . . . . . . . . . . ZCSPL16679 ZCSPL16679 ZCSPL16679 ZCSPL16679 ZCSPL16679 ZCSPL16679ValidatedLamp 185nm (single ended) . . . . . . . . . . . . . . . . . . . . . ZCSPL18061 ZCSPL18061 ZCSPL18061 ZCSPL18061 ZCSPL18061 ZCSPL18061Replacement Magnetic Ballast. . . . . . . . . . . . . . . . . . . . ZCSPB3354 ZCSPB3354 ZCSPB3354 ZCSPB3354 ZCSPB3354 ZCSPB3354Replacement Quartz Sleeve (dual ended). . . . . . . . . . . ZCSPQ3198 ZCSPQ3198 ZCSPQ3198 ZCSPQ3198 ZCSPQ3198 ZCSPQ3198Replacement Quartz Sleeve (single ended) . . . . . . . . . ZCSPQ18348 ZCSPQ18348 ZCSPQ18348 ZCSPQ18348 ZCSPQ18348 ZCSPQ18348

NOTE: Thermistors, optical sensors, sanitary connections, ozone destruction, hot temperature units, light traps, and remote electrical controls are available. Please contact Technical Support for detailed information. Mating flanges are not supplied with units.

208




Replacement UV Monitoring SystemKits for Aquafine® Series UV Sterilizers

Upgrade existing UV sensors with new premium UV and temperature

monitoring technology.

An integrated NIST traceable (optional) UV and temperature monitoring system

will accurately monitor UV intensity and process water temperature of your

existing UV treatment equipment from Aquafine. The new design improves

reliability and performance accuracy in one state-of-the-art monitoring technology

system. Component cost savings and improved liability protection will be some of

the key benefits you will have with this state-of-the-art monitoring system. The

detector employs a Gallium Nitride (GaN) photodiode and a semiconductor

temperature sensor in a single package, along with its on-board electronics for

remote and local operation features:

• Detector: UV and temperature sensors in a single housing

• Optional NIST-traceable UV sensor calibration with certificate upon request

• No optical filters, no degradation

• Withstands non-operating temperatures of 250°F

• 121°C for steam sterilization at a maximum pressure of 250psi (17.2 bar)

• Complete on-board electronics for UV and temperature

• Absolute and percent UV readout options

• Detector Cable: Water-resistant axial connector and cabling

• No diffuser, therefore no UV solarization

• Temperature sensor and controller does not require calibration

• Detector can be used for UV Monitoring Station and Aqualogic 2000™ system.

209





Replacement UV Monitoring SystemKits for Aquafine® Series UV Sterilizers

Ordering Information for Kits.

Remote UV Monitoring SystemThis kit is intended as a remote self-contained, wall or cabinet mounted,monitoring station and detector for use with any Aquafine units.

Standard Kit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZCSPM41628NIST Traceable Kit . . . . . . . . . . . . . . . . . . . . . . . . ZCSPM416281

CSL Monitoring SystemThis kit is intended to upgrade existing CSL units with the new monitoring stationand detector.*

Standard Remote Integrated Kit . . . . . . . . . . . . . . ZCSPM41550NIST Traceable Remote Integrated Kit . . . . . . . . . ZCSPM415501*Note: Dual Chamber units require two kits

Spare PartsDetector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZCSPM41174NIST Traceable Detector . . . . . . . . . . . . . . . . . . . . . . . . ZCSPM411741Cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZCSPM41116CPVC Compression nut . . . . . . . . . . . . . . . . . . . . . . . . . ZCSPM4252SS Compression Nut . . . . . . . . . . . . . . . . . . . . . . . . . . . ZCSPM40317O-Ring (Viton®) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ZCSPM40432

210




Ultraviolet Light Traps

Non-metallic piping systems that employ ultraviolet (UV) sterilization are susceptible to

photochemical degradation. These piping systems must be protected from the effects of

ultraviolet light emitted by the UV unit through the use of “UV Light Traps.” This line of

light traps has been developed to provide that protection; traps should be installed at

the inlet and outlet of the UV sterilization unit prior to connecting the unit to any non-

metallic piping material. All traps in this product line are constructed of 316L stainless

steel, OD tube size, and are shipped complete with gasket (flange or sanitary) and

hardware (flange bolts and/or sanitary clamp) as applicable.

• Each trap is ordered separately permitting greater flexibility in selecting end

connection configurations

• Pre-fabricated traps ship complete with all gaskets and hardware appropriate for

the end connections selected

• Sizing flexibility ranges from 1/2" flange or ferrule through 4" flange or ferrule

SPECIFICATIONSSLT TTE 20 TC

“S” Shaped Traps . . . . . . . . . . . SLT FFM - Flange x Flange - Mill Finish 05 - 1/2" Flange / Ferrule FFE - Flange x Flange - Electropolished (flange ring not available)FTE - Flange x Sanitary - Electropolished 10 - 1" Flange Ring / Ferrule

End Connection. . . . . . . . . . . . . . . . . . . . . . TTE - Sanitary x Sanitary - Electropolished 15 - 1-1/2" Flange Ring / Ferrule20 - 2" Flange Ring / Ferrule XX - No port for resistivity element30 - 3" Flange Ring / Ferrule HC - 3/4" Half Coupling (threaded

Connection Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40 - 4" Flange Ring / Ferrule resistivity element (FF connections only)Re Port Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TC - 1-1/2" Ferrule (sanitary resistivity

element) used for 2" tubeTC - 2" Ferrule (sanitary resistivity element)

used for 3" and 4" tube

SPECIFICATIONSYLT 430 V

“Y” Shaped Traps . . . . . . . . . . . YLT 325 - 3" Flanged UV connections, 2.5" flanged common inlet / outlet 330 - 3" Flanged UV connections, 3" flanged common inlet / outlet 430 - 4" Flanged UV connections, 3" flanged common inlet / outlet

End Connection. . . . . . . . . . . . . . . . . . . . . . 440 - 4" Flanged UV connections, 4" flanged common inlet / outlet V - Vertical inlet / outletConnection Orientation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . H - Horizontal inlet / outlet

211




VALVES

Blend Valves

Water Temperature Blend Valves are designed to temper the inlet water to a waterpurification system, to optimize the water system’s performance. The valve is suppliedwith a temperature controller (blend valve), brass nipple and brass cross fittings, andinline dial thermometer.

• Controls temperatures from 20°C to 45°C, with an optimum temperature of 25°C.Temperature setting is field-adjusted upon installation.

• Thermostatic controller constructed of rough brass, chrome-plated, with an integralstop check strainer, and removable thermostatic cartridge for ease of maintenance.Control knob is constructed of stainless steel.

• Wall mounting bracket is optional


Catalog Number . . . . . . . . . . VALRVT050VPV ZIVC00141 ZIVC00142 VALRVT125VPV ZIVC00143 VALRVT200VPV

Body Type . . . . . . . . . . . . . . . . . . PVC PVC PVC PVC PVC PVCO-ring . . . . . . . . . . . . . . . . . . . . . . Viton® Viton® Viton® Viton® Viton® Viton®

Capacity . . . . . . . . . . . . . . . . . . . . 4 gpm 8 gpm 15 gpm 25 gpm 50gpm 80gpmConnection . . . . . . . . . . . . . . . . . 1/2" 3/4" 1" 11⁄4" 11⁄2" 2"

Catalog Number . . . . . . . . . . VALRVT050VPP VALRVT075VPP VALRVT100VPP VALRVT150VPP VALRVT200VPP

Body Type . . . . . . . . . . . . . . . . . . Polypro Polypro Polypro Polypro PolyproO-ring . . . . . . . . . . . . . . . . . . . . . . Viton® Viton® Viton® Viton® Viton®Capacity . . . . . . . . . . . . . . . . . . . . 4 gpm 8 gpm 15 gpm 50 gpm 80gpmConnection . . . . . . . . . . . . . . . . . 1/2" 3/4" 1" 11⁄2" 2"


Catalog Number ZR2523001 ZR2523002 ZR2523003 ZR2523004 ZR2523005 ZR2523006

Type . . . . . . . . . . . . . . . . . . . . . . 5-200-1 5-400-1 5-200 5-400 5-700 5-900Flow range . . . . . . . . . . . . . . . . . 4–5 6–10 10–18 19–30 31–45 45–60Pressure drop . . . . . . . . . . . . . . 5–10 6–10 7–18 5–13 5–10 5–12Inlet size. . . . . . . . . . . . . . . . . . . 3/4" 3/4" 3/4" 3/4" 11⁄4" 11⁄2"Outlet size . . . . . . . . . . . . . . . . . 3/4" 1" 3/4" 1" 11⁄2" 11⁄2"

System DimensionsL x W x D (inches) . . . . . . . . . . . 11x6x73⁄4 11x61⁄4x8 11x6x73⁄4 11x61⁄4x8 12x61⁄2x101⁄8 13x7x121⁄2

Shipping Weightlbs. . . . . . . . . . . . . . . . . . . . . . . . 10 14 10 14 18 27

Optional MountingBracket (Catalog Number) ZR2523008 ZR2523008 ZR2523008 ZR2523008 ZR2523008 ZR2523009

Pressure Relief ValvesSiemens pressure relief valves are designed to prevent over pressures, maintain back pressures or act as an automatic by-pass invessels and piping. The pressure relief valves can handle corrosive and ultra-pure liquids with inlet pressures up to 100 psi. Thepressure relief valves are designed to activate at the desired set point, and contain a Teflon shaft for non-sticking operation.

212



WASTEWATER

Wastewater Capabilities

Preliminary Treatment/Pre-treatmentIntake systems, screens and rakes

Grit removal

Pumps

Flow equalization

Aeration

Odor control

Media filtration

Clarification

pH adjustment

Oil/Water SeparationAPI separators

Plate separators

Hydrocyclone separators

DAF/DGD Separators

IAF/IGD Separators

Skimmers

Walnut shell filters

Chemical Precipitation/NeutralizationChemical feed systems

Bulk chemical handling

Lime slakers

Batch and continuous precipitation units

Membrane systems

ClarificationClarifiers

High rate clarification

Plate separators

Skimmers

Flotation systems

Sludge collectors

Adsorption clarifier-filter systems

Residuals ManagementSpent caustic, spent acid and

organicwaste management

Spent catalyst recovery

Biological TreatmentSequencing batch reactors

Select or plug flow reactors

Multi-channel and single-channel oxidation ditches

Surface aerators

Jet aerators

Fine and coarse bubble aeration

Mixers

Anaerobic

RBCs/SBCs

MBR (Membrane Bioreactor)

MBBR (Moving Bed Biofilm Reactor)

Trickling filters

Activated sludge systems andpackage plants

Biological aerator filters

Biotowers

Powdered activated carbon systems

GAC fluid beds

Media

Advanced fluidized composting

Biological nutrient removal

Monitoring and control

Filtration/PolishingConventional shallow and deep bedfilters

Upflow filters

Pulsed bed filters

As the world’s leading provider of industrial and municipal wastewater treatment,Siemens offers the most comprehensive solutions to our customers’ wastewatertreatment problems. From groundwater or landfill leachate treatment, tomunicipal wastewater or zero-discharge facilities, Siemens offers a total solutionsapproach to wastewater treatment, recovery and reuse. We have the widestrange of technologies, products and services to help you minimize operatingcosts, maximize resources and meet discharge requirements.

Siemens provides a complete range of technologies and services for wastewatertreatment industry, from pretreatment to effluent discharge and residualsmanagement:

213




WASTEWATER

Wastewater Capabilities

Traveling bridge filters

Multimedia filters

GAC fluid beds

Membrane filtration

Reverse osmosis

Activated carbon

Pressure filters

Filter underdrains

Micro-screens

Solids HandlingGravity thickeners

Aerobic and anaerobic digestion

Belt filter presses

Filter presses

Pasteurization

Sludge dryers

Composting

Wet air regeneration

Incineration

Sludge conveyance systems

Groundwater, Soil Remediation/Leachate Treatment

Media filters

Biological treatment

Clarification

Metals removal systems

Solids handling systems

Activated carbon systems

In-process TreatmentWet air oxidation

Metals removal

Coker clarifiers

Desalter oil/water separators

Selenium removal

Evaporation/crystallization

Ion exchange

UV oxidation

Strippers

Carbon adsorption

Resource RecoveryOil, glycol recovery systems

Metal recovery systems

Activated carbon recycling and

reactivation

Chemical recovery systems

Water reuse systems

Energy recovery systems

Ion exchange

Air/VOC/SO2 Treatment & RecoveryOdor control

Sulfur recovery

H2S removal

Activated carbon adsorbers

Emergency vapor scrubbers

VOC/odor containment covers

Gas collection and incineration

Support ServicesLaboratory analysis

Treatability and pilot plant studies

Startup and personnel training

Preventative maintenance contracts

Rehabilitation and retrofits

Service contracts

Outsourcing

Design-build-own-operate

Financing, leasing

Centralized treatmentResource recovery

For Additional Information on Our Wastewater Capabilities Contact:

Siemens Water Technologies

181 Thorn Hill Road

Warrendale, PA 15086

toll free 800.525.0658

telephone 724.772.1402

fax [email protected]


This page intentionally left blank

BACK


Support Services

ACTIVATED CARBON TURNKEY SERVICESAdsorber Exchange Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216Analytical Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216Carbon Changeout Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216Reactivation and Recycling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .216

ENVIRONMENTAL SERVICESGroundwater Remediation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .217Hazardous Waste Treatment and Recovery . . . . . . . . . . . . . . . . . . . . . .217Hydrocarbon Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218Wastewater Ion Exchange Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . .218

ION EXCHANGE RESIN TURNKEY SERVICESReplacement Resin . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219Resin Cleaning and Reconditioning . . . . . . . . . . . . . . . . . . . . . . . . . . . .219Resin Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .219 Resin Transportation (Bulk) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .220Turnkey Removal and Replacement Services . . . . . . . . . . . . . . . . . . . .220

MAINTENANCE AND OPERATING SERVICESBuild-Own-Operate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221Service Contracts and Preventative Maintenance . . . . . . . . . . . . . . . . .221Start-Up Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .221Temporary Water Treatment Systems . . . . . . . . . . . . . . . . . . . . . . . . . .222

RO MEMBRANE TURNKEY SERVICESMembrane Care ProgramSM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223Analytical Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223Off-Site Membrane Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223Replacement Membranes and Components . . . . . . . . . . . . . . . . . . . . .223 Chemical Cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .223

SPARE AND MANUFACTURERS’ ORIGINAL PARTSSpare Parts, Expendables and Consumables . . . . . . . . . . . . . . . . . . . .224Replacement Filtration Media . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224Manufacturers’ Original Parts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .224Replacement Tanks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225Water & Wastewater Data Book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .225

TECHNICAL SERVICESAnalytical Water Testing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226Application Engineering & Custom System Design . . . . . . . . . . . . . . . .226Audits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226Pilot Studies . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .226Project Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227System Optimization Program . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .227NovaSys – Mechanical Upgrade Program . . . . . . . . . . . . . . . . . . . . . . .228Documentation and Validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .229

T A B L E O F

C O N T E N T S

215

216



SUPPORT SERVICES

Activated Carbon Turnkey Services

Siemens Water Technologies is the single source for all your Granular Activated Carbonneeds. Our complete line of equipment and Westates® activated carbon products providesthe right solution for all your applications, whether industrial, municipal or environmental.We offer turnkey Services to ensure that your equipment continues to operate reliably andeconomically, while meeting regulatory requirements. From process evaluation andmodeling through design, fabrication and installation, to custom on-site service, Siemens hasthe financial stability and programs to manage your long-term risk.

ADSORBER EXCHANGE PROGRAMOffers a simple and cost effective way to handle your removable adsorber equipment tanks.When the adsorber has reached the end of its useful life and the activated carbon inside is“spent”, a local Siemens Water Technologies technician delivers fresh carbon tanks to yoursite. We can assist with the spent carbon profiling and acceptance procedures necessary fortimely removal and reactivation of your spent carbon. After our environmental departmentapproves the profile, we work with you to arrange for pick-up of the spent adsorber(s) andtransport to our reactivation facility.

ANALYTICAL TESTING Siemens operates a fully equipped carbon testing laboratory that uses ASTM, AWWA andinternally developed standard test methods to fully characterize virgin and spent activatedcarbons. Our laboratory has been certified as an environmental testing laboratoryapproved for testing hazardous solid wastes for ignitability, corrosivity, toxicitycharacteristics leaching procedures (TCLP), inorganic metals and organics in accordancewith appropriate EPA methods. Wastewater fields of testing include inorganic metals andorganics in accordance with EPA methods.

CARBON CHANGEOUT SERVICESFor systems that are permanent and hard-piped, Siemens offers turnkey carbon changeoutservices. Our service crew mobilizes on site to remove, package and label the spent carbon inDepartment of Transportation (D.O.T) approved containers. After removal, inspection of thevessel interior and internal distributors is conducted and minor repairs are made if necessary.The adsorber is refilled with fresh activated carbon and the spent carbon is transported to ourRCRA-permitted reactivation facility.

REACTIVATION AND RECYCLINGSiemens offers the most environmentally sound alternative to disposing of spentcarbon in landfills. Our RCRA-permitted reactivation facility recycles used carbonby processing it through a furnace system, removing and destroying inorganicimpurities. The recycled carbon exits the reactivation units, is cooled, tested forquality assurance and packaged for reuse. Lot numbers, sampled and analyzed inaccordance with Siemens' QA/QC program, identifies the reactivated carbon. Theentire state-of-the-art process is computer controlled and monitored, ensuring thefacility meets or exceeds federal and state regulatory requirements for air andwater discharges. A Certificate of Reactivation can be issued for each shipment ofrecycled carbon. This certifies that the spent carbon has been recycled in a mannerthat meets or exceeds all applicable RCRA and Benzene NESHAP regulations.

Other turnkey services include:• Design/Engineering • Carbon Canister Monitoring• Fabrication/Installation – Lic. Contractor • Benzene NESHAPS Monitoring• Mobilization/Removal of Equipment • Transportation• Dedicated Potable Water Vehicles

217




SUPPORT SERVICES

Environmental Services

GROUNDWATER REMEDIATION SERVICESWater is our planet’s most valuable natural resource. Faced with the challenges ofincreasing populations, more stringent government standards and more complextreatment solutions, many municipalities and industries alike are faced with the growingchallenge of properly treating their contaminated wells, runoff and other groundwatersupplies. Siemens Water Technologies provides the technical know-how and has the cost-effective solutions to make treating contaminated waters – whether destined for potabledrinking water or non-potable discharge – simplified.

Siemens Environmental Services include reliable solutions for dealing with your mostdifficult contaminated waters issues. Our products and systems are based on the BestAvailable Technology (BAT) for treating a broad range of contaminants, including: • Arsenic• Chrome, Hexavalent chrome• Iron• Manganese• MTBE (Methyl tertiary-butyl ether)• Nitrates• Perchlorate• Radionuclides• TCE (Trichloroethylene)• VOC (Volatile organic compounds)

HAZARDOUS WASTE TREATMENT AND RECOVERYSiemens operates two, fully-permitted facilities with federal RCRA Part B and CERCLAauthority for the treatment and recovery of inorganic or trace organic waste. Wastes aresent to the facilities in drums (of all sizes), portable totes, cubic yard bags or boxes andtanker trucks. Virtually everything that we take into our facilities is in some way recycled.Facilities located in Roseville, Minnesota and Los Angeles, California serve as regionalhubs for the treatment of hazardous wastewater and the recovery of reusable byproducts.

Core industries for this service include:• Printed circuit board manufacturing• Metal finishing• Automotive• Aerospace• Semiconductor manufacturing• Parts washing• Groundwater cleanup• Environmental Contractors• General Industry

There are many other industrial wastes that may not be RCRA regulated, but still cannotbe discharged to sewer or local landfill. Boiler cleanout, low level metal rinsewaters, partswasher effluent, bag house dust or ammonia water are just a few examples of the varietyof non-regulated wastes also processed by Siemens.

Our goal is to produce zero hazardous waste by extracting all reusable material, toeliminate pollutants from the environment and avoid disposal costs and liability. Ouradvanced processing techniques have allowed us to increase beneficial reuse rate ofthese wastes to over 90% as reusable chemicals and metallic commodities.

218



SUPPORT SERVICES

Environmental Services

HYDROCARBON SERVICESWhen waste generation can‘t be prevented, reuse and recycle are at the top of theEPA’s waste management best practices list. How these materials are managedmatters to both the customer and Siemens. Our hydrocarbon services businessprocesses and recycles oily wastes and contaminated water from both commercialand industrial customers. A broad range of treatment and recycling options helpsimplify our customers’ waste management needs and at the same time ensurescomplete environmental compliance and minimizes liability.

Services range from collection and recycling of used Glycol and antifreeze products,used oil filters, and used oil to oil-water separation and cleaning to emergencyresponse and spill support. While our business is regional, we service all types ofcustomers along the Atlantic seaboard down through the Gulf Coast.

WASTEWATER ION EXCHANGE SERVICEWastewater Ion Exchange (WWIX) is a service-based treatment approach for heavymetals control in dilute wastewater streams. We integrate equipment and serviceoption combinations to meet your discharge requirements, achieve the water qualitylevel needed for reuse while also minimizing your capital investment, reducingoverall space requirements and minimizing the liability associated with on-sitestorage and handling of chemicals.

Our Wastewater Ion Exchange (WWIX) systems use specially selected resins andmedias to remove soluble heavy metals from various manufacturing processes,cooling systems and contaminated groundwater. Each resin/media has a finitecapacity for metals removal. Once this capacity is reached, a Siemens field servicetechnician removes the exhausted tanks and replaces them with fresh tanks. Theexhausted resin/media is returned to our RCRA-permitted plant for regeneration andreuse. The byproducts of these regeneration processes are further subjected to ahigh temperature recovery process that captures the metals for reuse. All residualsare captured as individual metals or sold as part of an iron-rich material used in theproduction of Portland cement.

219




SUPPORT SERVICES

Ion Exchange Resin Turnkey Services

REPLACEMENT RESIN

Choose USF™ Ion Exchange ResinAs a leader in resin technology, we noticed a trend toward inconsistent performanceand quality of resins available in the marketplace. Because of the process guaranteesSiemens Water Technologies offers, we are able to produce resins that meet morestringent, tighter resin performance specifications. Thus, USF™ ion exchange resin wasestablished to ensure our customers receive the highest quality product.

Advantages of Choosing USF™ Resin• We offer USF™ ion exchange resin at cost savings over equivalent products.• Our QA/QC program is ANSI N45.2, 10CFR50 Appendix B, and 10 CFR21

compliant to meet nuclear safety requirements.• We can provide process performance guarantees upon request.• Extensive technical support and resin application knowledge.

We provide Certificates of Analysis, Certificate of Conformance, and Shelf Lifestatements upon request.

RESIN CLEANING AND RECONDITIONING

Siemens Water Technologies provides services for salvaging your fouled, cross-contaminated and/or exhausted resin. We can remove resins, transport them to ourlocal processing plant, convert the resins and return them to your facility. This extendstheir useful life, minimizes costs and reduces system downtime. We can also do this ona scheduled basis for condensate polishing or other water treatment applications. Theresin can be transported to and from the job site in our tanker trucks, 55 gallon drums,lined fiber drums, or supersacks.

RESIN TESTING

To ensure optimum performance from your water treatment system, Siemensrecommends periodic testing of your ion exchange resin. Siemens' resin testing facilitycan determine resin quality, diagnose operating problems and evaluate new ionexchange products for conventional and special liquid processing applications. Our labcan perform the following tests on your resin samples.

Standard laboratory resin testing• Capacity before/after clean up steps• Percent moisture• Particles size • Iron Fouling• Microscopic visual examination

220



SUPPORT SERVICES

Ion Exchange Resin Turnkey Services

Additional testing available• Percent conversion• Bead strength• Metallic impurities• Cross contamination• Kinetics (Mix Bed Test)• Kinetics (Mass Transfer)• TOC Extractables• 16 hour soak

RESIN TRANSPORTATION (BULK)

Siemens offers bulk delivery and disposal of resin. We eliminate drum handling byslurrying the resin directly from your water treatment service vessels to one of ourfleet of tanker trucks. Whether we’re delivering your own regenerated resin orproviding new resin, we greatly reduce the steps involved and the documentationand administrative controls that go with temporary on-site and off-site disposal ofresin.

TURNKEY REMOVAL AND REPLACEMENT SERVICES

When it’s time to remove and replace your existing resin, consider Siemens to handleyour needs on a full turnkey basis. Siemens’ team of trained professionals will providecomplete project coordination, from predisposal testing through new resininstallation to used resin landfill disposal or investment recovery (used resin brokers).We do it all. With complete responsibility in Siemens’ hands, you can be assured thatyour project will be completed on schedule, within budget and most importantly, infull compliance with all environmental regulations.

In addition to being the largest distributor of ion exchange resin, Siemens alsoprovides a full range of resin support services including laboratory testing, removal,cleaning and resin re-conditioning for extended life. We offer special handling,custom packaging or bulk delivery to meet your needs. If you are considering disposaland investment recovery options, we have the expertise to help.

• Dynamic

• Organic Cl, SO4 Extractables

• 16 hour soak (UV)

• Dynamic (UV)

• Parr Bomb

• Terminal Settling Velocity (TSV)

• Super Fines (-60 mesh)

221




SUPPORT SERVICES

Maintenance and Operating Services

BUILD-OWN-OPERATE

Outsourcing water and wastewater treatment systems has been common over thepast 30 years. Because of the vast array of technologies and solutions available,more and more companies are handing this operation over to Siemens WaterTechnologies. We can provide and evaluate the right technological and economicsolutions, since our sole business is the operation of the entire treatment system.This ensures the lowest total treatment cost while insuring maximum on-lineoperation, guaranteed treated water quality, and the ability to quickly react tounforeseen circumstances. This allows you to focus on your core competency –making your product – while not using capital on projects that do not providerevenue. Companies that rely on outsourced services, however, still maintainstrategic control of their operations, both now and in the future.

SERVICE CONTRACTS AND PREVENTATIVE MAINTENANCESiemens offers you peace of mind with our custom service contracts andpreventative maintenance agreements. Extended equipment life and efficientoperation are direct benefits of selecting Siemens to maintain your water treatmentequipment.

Our service contracts are custom tailored to help you get the most value from yourwater treatment equipment investment. The Siemens Water Technologies servicetemplate is customized for your equipment and operating parameters. If yourequipment is not operating in the normal range, our custom service template willflag it immediately. A follow up letter is sent detailing the condition, correctiveaction, maintenance requirements, and potential complications if the condition isignored. This system provides an expert evaluation of your equipment operation ona regular basis.

In some cases you may chose to have Siemens perform the necessary maintenancetasks to extend your equipment life. We offer custom preventative maintenanceservices as part of our service contracts. We include services such as filter re-bedding,ion exchange re-bedding, RO membrane cleaning, and parts replacement such aspump seals, UV bulbs, and cartridge filters. A customized contract allows you to decidethe level and frequency of service that is best for your facility.

Our factory-trained service technicians are ready to serve you from over 80 officesin North America. Our localized service allows us to schedule service and repairswhen you need them. Our local service structure allows us to have fast emergencyresponse and parts availability when you need it. Contact your local branch for aservice evaluation for your plant today.

START-UP SERVICE

Siemens can provide a team of process experts to assist with your systeminstallation and bringing your system on line. Our factory/field project team willassist you with filling all tanks and equipment with production feedwater,monitoring the process through several production cycles and show yourproduction personnel all the process adjustments needed to be sure you’re gettingthe product water you expect.

222



SUPPORT SERVICES

Maintenance and Operating Services

We can also provide complete turnkey service. After defining your processparameters, we will configure the most cost-efficient system, install the equipment,fully test the process, train your personnel and provide guarantees regarding productwater. Many companies find this minimizes the demands on their own resources andpersonnel.

TEMPORARY WATER TREATMENT SYSTEMSFor over 30 years, Siemens has met the short-term and emergency treated waterneeds of our customers using our mobile water treatment systems.

Units may be installed in your plant and operated as stand-alone units or installedinside a trailer and controlled by the system panel. Units can be combined with otherSiemens products to assemble fully integrated water treatment systems designed tocustomers’ specific treated water quality and flow needs.

MOBILE SYSTEMS INCLUDE:• FlexRO® – Skid-mounted, self-contained, 100 gpm reverse osmosis units that

feature 3:2:1 (4M) array skids. • FlexTrex® – Skid-mounted ion exchange units that are designed to treat flows

ranging from 20 to 250 gpm per unit. Regenerated off-site, these portable unitsdo not use hazardous chemicals, do not generate wastewater and are ideal forpolishing raw or RO permeate water.

• PreFlex® – Units are modular in design, pre-plumbed, self-contained, skid-mounted pretreatment units. They are designed to the highest engineeringstandards with ASME code tanks, NEMA 4X panels and pneumatically actuatedsolenoid valves enabling them to be used in a wide variety of applications andenvironments including heavy industry.

• Mobile Clarifier Trailers – Self-contained, trailer-mounted system capable oftreating highly turbid water (>1000 NTU). The system is capable of producingextraordinarily clear effluent (0.5-1.0 NTU) with remarkable stability undervarying raw water conditions. Flow rates to 1,050 gpm.

• Mobile Demineralizer (DI) Trailers – These trailers are the treatment of choicefor zero-discharge applications and seasonal treated water needs. Withregeneration facilities across the country and a large fleet of over 80 servicebranches, Siemens can respond quickly to your emergency treated water needs.

• Mobile RO (Reverse Osmosis) Trailers – Self-contained, trailer-mountedsystems that can be configured with combinations of 4 skid-mounted FlexRO-100 units. Systems have flow rates up to 400 gpm per trailer.

TYPICAL USES:

• Facility expansions

• Pilot plant water needs

• Interim use until a permanent system is installed

• Process water/treated water quality changes

• Environmental salt discharge problems

• Emergency/scheduled shutdowns

• Seasonal water needs

223




SUPPORT SERVICES

RO Membrane Turnkey Services

MEMBRANE CARESM PROGRAMOur Membrane CareSM Program provides the services to keep your reverse osmosis (RO)system operating at peak performance. In addition to our large inventory ofmembranes and replacement parts, our trained service technicians can provideassistance with membrane removal and installation or membrane cleaning, either on-site utilizing your clean-in-place skid or off-site at one of our regional cleaning facilities.We offer membrane autopsies and complete laboratory services to evaluate systemperformance and improve productivity.

ANALYTICAL SERVICESSiemens’ analytical testing includes feedwater and outlet water analyses and variousmembrane analytical techniques. Our Membrane Center of Excellence can providefeed, concentrate and permeate water analyses, SDI pad analyses and various non-destructive and destructive tests. Membrane analysis assists in identifying the foulingagent(s), proper cleaning techniques and proper pretreatment methods to preventrecurring fouling.

OFF-SITE MEMBRANE CLEANINGSiemens’ off-site cleaning process is specifically designed to restore RO membranes toor near the original manufacturer’s performance specifications. Our proprietaryequipment and strict cleaning process are tightly controlled to ensure optimumcleaning performance, resulting in longer intervals between cleanings and/orreplacement. The cleaning process does not affect the structural integrity of themembrane and, therefore, does not void the manufacturer’s warranty. Siemens WaterTechnologies offers three levels of off-site cleaning service for your 4” and 8” elements.

REPLACEMENT MEMBRANES AND COMPONENTSSiemens is your leading source for replacement membranes. We supply elements from allof the major manufacturers. For your convenience, we inventory FILMTEC™ andHydranautics® membranes at our seven regional distribution facilities. This enables us tomeet short lead times and thereby minimize your system’s downtime. In addition, ourregional distribution facilities also stock major components, such as replacement gauges,pumps and end caps.

CLEANING CHEMICALSSiemens can determine the source of your membrane fouling problem and makerecommendations on the selection and purchase of proper chemical treatments and, ifnecessary, appropriate pretreatment steps. Our broad membrane system expertise enablesus to provide reliable diagnosis methods and sound troubleshooting to return yourequipment to optimum performance. We work with all the RO chemical manufacturers andprovide you with the best combination of RO antiscalants, chemical feed systems anddosing rates to keep your RO system running smoothly.

224



SUPPORT SERVICES

Spare and Manufacturers’ Original Parts

SPARE PARTS, EXPENDABLES & CONSUMABLES (Filter Cartridges, UV Bulbs, Gaskets, Nuts, Bolts, Piping)

We have the largest inventory of spare and replacement parts in the industry. If youneed filter elements, UV components, replacement gauges or controls, we stock theseas well as other parts. We supply both industrial grade products and validatedpharmaceutical bacteria-removal cartridges.

We have filter housings for every purpose, from simple plastic construction to anelectro-polished, sanitary pharmaceutical design. Our complete line of sterilizersdeliver flows of 1 gpm to 1,000 gpm. These systems can be designed to reducebacterial contamination and destroy TOC (total organic carbon) materials in the supplywater.

We also provide replacement and spare parts for your ancillary system components,such as pumps, valves and gaskets. Whether it involves normal wear-and-tearreplacement, maintenance or spares inventory, we will help ensure your watertreatment systems operate efficiently with minimal downtime.

REPLACEMENT FILTRATION MEDIA

We offer a wide variety of filtration medias and underbedding materials for everyfiltration application. These include sand, garnet, gravel, anthracite or quartz materialsscreened to the specific mesh sizes required. We also offer media removal, vessel anddistribution inspection, installation of the new media plus disposal of the spent mediaif required.

MANUFACTURERS’ ORIGINAL PARTS

We provide components for equipment names you are familiar with in the Siemensfamily, including Illinois Water Treatment (IWT®), Permutit®, L*A Water, Kisco™,Ionpure® and Polymetrics™, to name a few. From vessel replacements to internals andPermutit multiport valves, Siemens is the only company that can ensure the parts youbuy are designed and engineered to fit your original equipment. Our library of originalinstallation drawings ensures all replacement components are completely compatiblewith existing systems.

CALL THE NUMBER BELOW TO ORDER PARTS FOR EQUIPMENT MADE BY THESE SIEMENSCOMPANIES.

Arrowhead® Industrial Water 1-800-875-7873 ext. 5000Continental® 1-800-875-7873 ext. 5000Interlake 1-800-875-7873 ext. 5000Ionpure® 1-800-875-7873 ext. 5000IWT® (Illinois Water Treatment) 1-800-582-5261Kisco™ 1-800-582-5261L*A Water 1-800-582-5261Mitco 1-800-875-7873 ext. 5000Penfield® 1-800-875-7873 ext. 5000Permutit® 1-800-631-0878 ext. 107, 108 Polymetrics™ 1-800-875-7873 ext. 5000Water Services of America 1-800-875-7873 ext. 5000

225




SUPPORT SERVICES

Manufacturers’ Original Parts

MANUFACTURERS’ ORIGINAL PARTS SPECIALIZED OR PROPRIETARY ITEMSREPLACEMENT TANKS (PRESSURIZED AND ATMOSPHERIC) VESSEL REPAIRS AND UPGRADES

Whether it is a system supplied by Siemens, a legacy company or any/all other watertreatment manufacturers, we can assist you with specialized or proprietary itemsincluding:

Some of the tanks, vessels and vessel repairs that we can provide:

For additional information, call 800.582.5261 ext. 378.

PERMUTIT® WATER AND WASTEWATER TREATMENT DATA BOOK

As advertised for years by Permutit, “We wrote the book on water treatment”. Thelatest edition of this popular, 166-page engineering data book contains charts, graphsand illustrations for general water data, pipes and fittings, chemical properties anddata, and waste treatment information. The book is a useful tool for all individualsinvolved in the design of water and wastewater treatment systems, pollution controland water recovery and reuse. To order copies or for additional information, contact 1-800-631-0878, ext. 107, 108.

• Bushings

• Chevron tube settlers

• Desiccant breathers/fume vents –

including designs using dyed resins

• Distribution systems – complete

systems or individual components

• Face piping

• Gauge glasses

• Inlet diffusers

• Level switches

• Nozzles – conventional, dual velocity,

spray, etc.

• Overflow controls/traps

• Packing for deaerating heaters,

decarbonators, degasifiers, etc.

• Pillow blocks

• Pressure gauges

• Rotary surface washers

• Rupture disks

• Shafts

• Sampling devices/sinks

• Sight windows

• Socket agitator arms

• Strainers and strainer baskets –

conventional, dual velocity, specialty,

underdrain, etc. – including

polystyrene, PVC and stainless steel

construction

• Thermometers

• Vacuum breakers

• Valve inspection and repair

• Valve retrofits – manual to automatic

• Valves, maintenance kits and parts –

inlet, control, pressure relief, spray,

multiport, etc.

• Vent condensers

• ASME code and non-code designs

• Chemical regeneration tanks (acid,

caustic and brine)

• Custom designed tanks

• Double dish design

• Exact replacements

• Fiberglass tanks

• Flat false bottom vessels

• Replacement tanks for neutralization

systems

• Replacing tank liners on-site

• Spray lined and rubber lined vessels –

including FDA compliant linings

• Storage tanks

226



SUPPORT SERVICES

Technical Services

ANALYTICAL WATER TESTING Before you can select the right combination of technologies to deliver the level ofwater quality that you need, it is essential to know exactly what is in your water.Siemens' analytical testing laboratory offers complete testing services to determinethe most appropriate system components to meet each customer’s particularapplication needs. The water analysis and research and development laboratoriesconduct a wide range of tests designed to accommodate the analysis of water forall applications, including pharmaceuticals, high-purity water, hemodialysis,laboratory, pretreatment and troubleshooting. The laboratory has the capacity toperform inorganic analysis and TOC testing. We offer postage-paid water analysistest kits designed to address a variety of field requirements. Once a test kit isreturned to the lab, we tailor the testing and reporting to meet specific customerrequirements. Comprehensive reports are generated and the laboratory maintainsan extensive database.

APPLICATION ENGINEERING & CUSTOM SYSTEM DESIGN

Siemens offers customized water treatment systems in addition to standard, pre-engineered products. The scope of our involvement in a project is determined bythe needs of the customer, the types of technologies being evaluated and thecomplexity of the treatment solution being considered. Designers, drafters andengineers in our CAD/CAE (computer-aided design/computer-aided engineering)group work together with manufacturing, R&D and sales personnel to developequipment and system designs for a broad scope of treatment needs. They haveextensive experience in process water filtration and CAD/CAE, with specificexpertise in piping design, process instrumentation, steel weldment fabrication,tooling, electrical design, panel layout and programming. When you need acontinuous supply of high-purity water for your critical application, consult with ourwater treatment experts to determine the most effective and efficient system tocontinuously and consistently meet those needs.

AUDITS

One of the many services Siemens offers to help customers manage their water andwastewater treatment are plant audits. These completely confidential audits,conducted by our specially trained audit teams, help customers solve a specificproblem or improve their plant operations.

PILOT STUDIES

We offer process water and wastewater treatment pilot systems representingvarious technologies so you can test the technology on your application before youbuy. Among our pilot plant capabilities is the industry’s most complete test facilityfor biological processes and aeration, the world’s only complete wet air oxidationplant and equipment for testing dewatering processes, pumping and filtrations.Many of our pilot facilities are trailer or skid-mounted, so you can test variousprocesses on your wastewater at your site – under operating conditions.

227




SUPPORT SERVICES

Technical Services

PROJECT MANAGEMENTEach water or wastewater treatment system we manufacture and install is projectmanaged by an expert focused on the needs of your industry. From initial problemanalysis to system start-up, we’ll work with your team to ensure a successful treatmentproject that meets your requirements. Our biopharmaceutical design/build and programmanagement group offers design/build capabilities; pre-engineered/modular constructedequipment and process systems (skid) applications. We also offer turnkey projectmanagement.

SYSTEM OPTIMIZATION PROGRAMFor existing water treatment systems that are not operating at optimum efficiency,Siemens offers the System Optimization Program to enhance system performance. Theprogram is offered through Siemens' Engineered Parts and Services (EP&S) group.Through the program, an EP&S Technical Services Engineer will:• Travel to the site.• Conduct a comprehensive review of the water treatment system and ancillary

equipment.• Meet with operating personnel to determine current maintenance procedures and

operating conditions.• Review operating data and sequences, drawings and operating and maintenance

manuals.• Provide a detailed engineering report, including observations and recommendations.

Services are available on a per diem basis and can include engineering consulting, processtroubleshooting, equipment evaluation and optimization and an optional ProcessOptimization Modeling Report. Using Siemens' WinCPD® proprietary computer simulationprogram, a Process Optimization Modeling Report will be generated. Allowing a multitudeof variables withing the water treatment system to be analyzed, the WinCPD® program wilthem model the most effective operating parameters for the system. The programincludes water treatment systems supplied through Siemens' family of companiesincluding systems previously supplied by:

• Continental® Water Systems Corporation • L*A Water• Himsley Engineering Ltd./Himsley International • Mitco• Interlake Water Systems Company • Penfield®• Ionpure® • Permutit®• Illinois Water Treatment (IWT®) • Polymetrics®• Kisco® • Water Services of America

We are also well qualified to perform evaluations on water treatment systems supplied byall other manufacturers. For additional information, call 800.582.5261 ext. 342 or 340.

228



SUPPORT SERVICES

Technical Services

NOVASYS – MECHANICAL UPGRADE PROGRAMAfter years of usage, a water treatment system may be showing signs ofdeterioration. The vessel or piping may be corroded or leaking or variouscomponents may not be functioning properly. In other instances, the technologymay have changed offering better efficiencies.

Through NovaSys, one of our inspectors will travel to the site, perform a thoroughsystem analysis and submit a detailed list of recommendations. Suggestions foralternative materials of construction and/or designs will be included within therecommendations to reduce costs and improve safety and operating efficiencies.

As part of the program, we can replace worn or outdated:• Tanks (repairs are also available)• Piping manifolds• Internals and other distribution systems• Valves, strainers, pumps and other components• Resins and other media

We will also offer recommendations for upgrading the system. Typical NovaSysupgrades that we supply include:

• Changing conventional downflow softeners and two bed deionizers (also calledseparate beds) into highly efficient packed bed systems

• Upgrading internal tank distribution systems for greater reliability• Using Siemens' patented Heat Optimized Technology (HOT Series) to transform

typical carbon towers into hot water sanitizable carbon filters to control effluentbiological growth

• Upgrading regeneration chemical skids (pumped or educted systems) forimproved performance

Some of the advantages of Siemens' NovaSys Mechanical Upgrade Program include:• Improves safety by minimizing burst and leak risks• Eliminates downtime for increased productivity• Provides consistent water quantity and quality• Saves costs because less chemicals are consumed• Improves pump performance for better chemical utilization• Corrects dosages and flow rates for improved regeneration times• Reduces maintenance labor and parts• Reduces utility costs through reduced water usage

For additional information, call 800.582.5261 ext. 340.

229




SUPPORT SERVICES

Technical Services

DOCUMENTATION AND VALIDATION

Siemens understands that process validation of the entire water treatment system isan important concern, and often a hidden cost, to our pharmaceutical customers.That’s why we offer systems that are designed with validation in mind. These systemsincorporate proven equipment components and instrumentation that makes datemonitoring more convenient for systems operators. We regularly install programmablelogic control (PLS) validated systems that continuously and automatically monitor andrecord critical parameters. We offer a full range of validation support documents withour pharmaceutical and biotechnology system designs. We also provide copies of ourdocumented, established quality control procedures for hemodialysis reverse osmosiswater systems and hemodialysis resin regeneration centers.

Section Table of Contents


BACK


Water Quality Standards, Constants,Conversions & Physical Data

REFERENCE INFORMATION TABLES

Conductivity and Resistivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 233

ASTM Reagent Water. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234

Clinical Laboratory Standards Institute. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234

USP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 234

AAMI Hemodialysis Water Quality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 235

U.S. Boiler Feedwater Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 236

Langelier Saturation Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 237

Calcium Carbonate Equivalents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 238

Equivalents of

Liquid Measures and Weights . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240

Pressure and Head . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240

Flow Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 240

Centigrade (°C) to Fahrenheit (°F). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241

Tank Areas and Volumes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 241

A Key to Relative Particle Size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 242

Velocity of Liquids in Pipes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 243

T A B L E O F

C O N T E N T S

231




BACK


233233REFERENCE TABLES

Conductivity and Resistivity (CaCO3 solutions at 25°C)



Conductivity Resistivity Dissolved Solids Grains/Gallon(micromhos-cm) (ohms-cm) (parts per million) (as CaCO3)

(as CaCO3)

0.056 18,000,000 0.0277 0.001640.059 17,000,000 0.0294 0.001700.063 16,000,000 0.0313 0.001810.067 15,000,000 0.0333 0.001930.072 14,000,000 0.0357 0.002110.077 13,000,000 0.0384 0.002220.084 12,000,000 0.0417 0.002400.091 11,000,000 0.0455 0.002630.100 10,000,000 0.0500 0.002920.111 9,000,000 0.0556 0.003220.125 8,000,000 0.0625 0.003680.143 7,000,000 0.0714 0.004150.167 6,000,000 0.0833 0.004850.200 5,000,000 0.100 0.005850.250 4,000,000 0.125 0.007310.333 3,000,000 0.167 0.009710.500 2,000,000 0.250 0.01461.00 1,000,000 0.500 0.02921.11 900,000 0.556 0.03221.25 800,000 0.625 0.03681.43 700,000 0.714 0.04151.67 600,000 0.833 0.04852.00 500,000 1.00 0.05852.50 400,000 1.25 0.07313.33 300,000 1.67 0.09715.00 200,000 2.50 0.146

10.0 100,000 5.00 0.29211.1 90,000 5.56 0.32212.5 80,000 6.25 0.36814.3 70,000 7.14 0.41516.7 60,000 8.33 0.48520.0 50,000 10.0 0.58525.0 40,000 12.5 0.73133.0 30,000 16.7 0.97150.0 20.000 25.0 1.46

100.0 10,000 50.0 3.22111.0 9,000 55.6 3.22125.0 8,000 62.5 3.68143.0 7,000 71.4 4.15167.0 6,000 83.3 4.85200.0 5,000 100.0 5.85250.0 4,000 125.0 7.31333.0 3,000 167.0 9.71500.0 2,000 250.0 14.6

1000.0 1,000 500.0 29.2

Conversions

Resistivity/Conductivity Total Dissolved Solids

ohm-cm = ___1_____ = _____1____ 1 grain per gallon = 17.1 parts per million (ppm)mho/cm Siemens/cm 1 part per million = 1 milligram per liter (mg/l)

234



REFERENCE TABLES

ASTM® Reagent Water SpecificationsCLSI® (formerly NCCLS) Reagent WaterSpecificationsUSP® 30 Pharmaceutical Grade Water Standard

UNITED STATES PHARMACOPOEIA 30 STANDARDS

USP 30 Pharmaceutical Grade Water

Organics . . . . . . . . . . . . . . . . . . . . . . . . . . <0.5 ppm TOC

Conductivity . . . . . . . . . . . . . . . . . . . . . . . <1.3 µS/cm at 25°C in-line measurement**

Endotoxin by LALPurified Water . . . . . . . . . . . . . . . . . . . . No specificationWFI . . . . . . . . . . . . . . . . . . . . . . . . . . . . <0.25 EU/mL

Bacteria (guideline only)Purified Water . . . . . . . . . . . . . . . . . . . . <100 cfu/mLWFI . . . . . . . . . . . . . . . . . . . . . . . . . . . . <10 cfu/100 mL

**from equivalent values from USP Table for Conductivity Limits as a Function of Temperature.

CLSI(CLINICAL LABORATORY STANDARDS INSTITUTE)*

Clinical Laboratory Reagent Water (CLRW)

CLSI

Resistivity @ 25°C . . . . . . . . . . . . . . . . . . . . . . . . . 10(megohms-cm)

Conductivity @ 25°C . . . . . . . . . . . . . . . . . . . . . . . 0.1(micromhos/cm)

Bacterial Growth (cfu/mL) . . . . . . . . . . . . . . . . . . . . 10Organics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . <500 ppb

a

Particulate Matter . . . . . . . . . . . . . . . . . . . . . . . . . . 0.22 µm Filtera

aThis specification is a process specification, and not measured by the end-user.

*Formerly NCCLS (National Committee for Clinical Laboratory Standards).

AMERICAN SOCIETY FOR TESTING AND MATERIALS

Standard Specifications for Reagent WaterASTM Type I II III IV

Conductivity @ 25°C (micromhos/cm) . . . . . . . . . . 0.056 . . . . . . 1.0 . . . . . . . 0.25 . . . . . . . . 5.0Resistivity @ 25°C (Megohms-cm). . . . . . . . . . . . . 18 . . . . . . . . . 1.0 . . . . . . . 4.0 . . . . . . . . . 0.2Total Silica (µg/L) . . . . . . . . . . . . . . . . . . . . . . . . . . 3 . . . . . . . . . 3. . . . . . . . . 500 . . . . . . . . . . –Total Organic Carbon (µg/L) . . . . . . . . . . . . . . . . . . 100 . . . . . . . . . 50. . . . . . . . . 200 . . . . . . . . . . –Chlorides (µg/L) . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . . . . . . 5. . . . . . . . . 10 . . . . . . . . . . 50Sodium (µg/L) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 . . . . . . . . . 5. . . . . . . . . 10 . . . . . . . . . . 50pH* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . – . . . . . . . . . –. . . . . . . . . – . . . . . . . . . . 5.0-8.0

Type A Type B Type C

Max Heterotropic Bacteria Count . . . . . . . . . . . . . . 10/1000 mL. . . 10/100 mL . . . 100/10 mLEndotoxin, EU/mL . . . . . . . . . . . . . . . . . . . . . . . . . . < 0.03 . . . . . . . 0.25 . . . . . . . . N/A

*The measurement of pH in Type I, II, and III reagent water has been eliminated because these grades of water do notcontain constituents in sufficient quantity to alter pH.

235




REFERENCE TABLES

Association for the Advancement ofMedical Instrumentation(AAMI)Hemodialysis Water Quality

Contaminant

Aluminum. . . . . . . . . . . . . . . . . . . . 0.01Antimony . . . . . . . . . . . . . . . . . . . . 0.006Arsenic. . . . . . . . . . . . . . . . . . . . . . 0.005Barium . . . . . . . . . . . . . . . . . . . . . . 0.10Beryllium . . . . . . . . . . . . . . . . . . . . 0.0004Cadmium . . . . . . . . . . . . . . . . . . . . 0.001Calcium . . . . . . . . . . . . . . . . . . . . . 2 (0.1 mEq/L)Chloramines. . . . . . . . . . . . . . . . . . 0.10Chromium . . . . . . . . . . . . . . . . . . . 0.014Copper . . . . . . . . . . . . . . . . . . . . . . 0.10Fluoride . . . . . . . . . . . . . . . . . . . . . 0.20Free Chlorine . . . . . . . . . . . . . . . . . 0.50Lead. . . . . . . . . . . . . . . . . . . . . . . . 0.005 Magnesium . . . . . . . . . . . . . . . . . . 4 (0.3 mEq/L)Mercury . . . . . . . . . . . . . . . . . . . . . 0.0002Nitrate (as N) . . . . . . . . . . . . . . . . . 2.00Potassium . . . . . . . . . . . . . . . . . . . 8 (0.2 mEq/L)Selenium . . . . . . . . . . . . . . . . . . . . 0.09Silver . . . . . . . . . . . . . . . . . . . . . . . 0.005Sodium. . . . . . . . . . . . . . . . . . . . . . 70 (3.0 mEq/L)Sulfate . . . . . . . . . . . . . . . . . . . . . . 100.00Thallium . . . . . . . . . . . . . . . . . . . . . 0.002Zinc . . . . . . . . . . . . . . . . . . . . . . . . 0.10

a) The physician has the ultimate responsibility for ensuring the qualityof water used for dialysis.b) Unless otherwise noted.

Maximum Concentration(mg/L)b

Maximum allowable chemical contaminant levels in water used toprepare dialysate and concentrates from powder at a dialysis facilityand to reprocess dialyzers for multiple usea.

Water Bacteriology/EndotoxinsProduct water used to prepare dialysate or concentrates from powder at adialysis facility, or to reprocess dialyzers for multiple use, should contain atotal viable microbial count of less than 200 CFU/mL and an endotoxinconcentration of less than 2 EU/mL. The action level for the total viablemicrobial count in the product water shall be 50 EU/mL and the actionlevel for the endotoxin concentration shall be 1 EU/mL. If these actionlevels are observed in the product water, corrective measures, such asdisinfection and retesting, shall be taken promptly to reduce the levels toan acceptable range.

236



REFERENCE TABLES

Boiler Feedwater Requirements

U.S. BOILER FEEDWATER REQUIREMENTS

Boiler H.P. gpm pound/hour

50 . . . . . . . . . . . . 4 . . . . . . . . . . . . . 1,72575 . . . . . . . . . . . . 5 . . . . . . . . . . . . . 2,587

100 . . . . . . . . . . . . 7 . . . . . . . . . . . . . 3,450150 . . . . . . . . . . . . 10 . . . . . . . . . . . . . 5,175175 . . . . . . . . . . . . 12 . . . . . . . . . . . . . 6,037200 . . . . . . . . . . . . 14 . . . . . . . . . . . . . 6,900225 . . . . . . . . . . . . 16 . . . . . . . . . . . . . 7,762250 . . . . . . . . . . . . 17 . . . . . . . . . . . . . 8,625275 . . . . . . . . . . . . 19 . . . . . . . . . . . . . 9,847300 . . . . . . . . . . . . 21 . . . . . . . . . . . . . 10,350350 . . . . . . . . . . . . 24 . . . . . . . . . . . . . 12,075400 . . . . . . . . . . . . 28 . . . . . . . . . . . . . 13,800500 . . . . . . . . . . . . 34 . . . . . . . . . . . . . 17,250750 . . . . . . . . . . . . 53 . . . . . . . . . . . . . 25,875

1,000 . . . . . . . . . . . . 69 . . . . . . . . . . . . . 34,5001,500 . . . . . . . . . . . . 104 . . . . . . . . . . . . . 51,7502,000 . . . . . . . . . . . . 138 . . . . . . . . . . . . . 69,0002,500 . . . . . . . . . . . . 172 . . . . . . . . . . . . . 86,2503,000 . . . . . . . . . . . . 207 . . . . . . . . . . . . . 103,5004,000 . . . . . . . . . . . . 276 . . . . . . . . . . . . . 138,0004,500 . . . . . . . . . . . . 310 . . . . . . . . . . . . . 155,2505,000 . . . . . . . . . . . . 345 . . . . . . . . . . . . . 172,500

10,000 . . . . . . . . . . . . 689 . . . . . . . . . . . . . 345,00015,000 . . . . . . . . . . . . 1,034 . . . . . . . . . . . . . 517,50020,000 . . . . . . . . . . . . 1,387 . . . . . . . . . . . . . 690,00025,000 . . . . . . . . . . . . 1,723 . . . . . . . . . . . . . 862,50035,000 . . . . . . . . . . . . 2,413 . . . . . . . . . . . . . 1,207,50040,000 . . . . . . . . . . . . 2,759 . . . . . . . . . . . . . 1,380,00045,000 . . . . . . . . . . . . 3,102 . . . . . . . . . . . . . 1,550,00050,000 . . . . . . . . . . . . 3,447 . . . . . . . . . . . . . 1,725,00060,000 . . . . . . . . . . . . 4,136 . . . . . . . . . . . . . 2,070,00080,000 . . . . . . . . . . . . 5,515 . . . . . . . . . . . . . 2,760,000

100,000 . . . . . . . . . . . . 6,894 . . . . . . . . . . . . . 3,450,000

Notes:• gpm is given to the nearest whole number• The above water quantities are based on 34.5 lb. of water evaporated per

hour at 212°F. The weight of 1 gallon of water is taken as being equal to8.34 lb. at 60°F. Intermediate water quantities in gpm are obtainable bymultiplying the boiler horsepower by 0.069.

• In selecting boiler feed pumps, the fact that boilers are often run 200 or300 percent of rating should be taken into consideration. The above figuresare of the actual boiler horsepower developed.

• Boiler feed pumps should have pressure in excess of the boiler ratedpressure in order to compensate for frictional losses, entrance losses,regulating valve losses and normal static head. These should be specifiedfor a particular installation. However, for estimating purposes, the followingvalues apply.

Boiler Pressure Feed Pump Discharge Pressure200 psi. . . . . . . . . . . . . . . 250 psi400 psi. . . . . . . . . . . . . . . 475 psi800 psi. . . . . . . . . . . . . . . 925 psi1,200 psi . . . . . . . . . . . . . 1,350 psi

237




REFERENCE TABLES

Langelier (CaCO3) Saturation Index(Based on the Langelier Formula: Larson-Buswell: Residue-Temperature- Adjustments: Arrangedby Nordell)

TABLE B: Temperatures in °F

UnitsTens 0 2 4 6 8

30 2.60 2.57 2.54 2.5140 2.48 2.45 2.43 2.40 2.3750 2.34 2.31 2.28 2.25 2.2260 2.20 2.17 2.14 2.11 2.0970 2.06 2.04 2.03 2.00 1.9780 1.95 1.92 1.90 1.88 1.8690 1.84 1.82 1.80 1.78 1.76

100 1.74 1.72 1.71 1.69 1.67110 1.65 1.64 1.62 1.60 1.58120 1.57 1.55 1.53 1.51 1.50130 1.48 1.46 1.44 1.43 1.41140 1.40 1.38 1.37 1.35 1.34150 1.32 1.31 1.29 1.28 1.27160 1.26 1.24 1.23 1.22 1.21170 1.19 1.18 1.17 1.16

TABLE A: Total Solids/ppm

ppm

50 0.0775 0.08

100 0.10150 0.11200 0.13300 0.14400 0.16600 0.18800 0.19

1000 0.202000 0.233000 0.254000 0.265000 0.266000 0.28

TABLE C:Calcium Hardness Expressed as ppm CaCO3(for 3 to 209 ppm CaCO3, use upper table; for 210 to 990 ppm CaCO2, use lower table)

UnitsTens 0 1 2 3 4 5 6 7 8 9

0 0.08 0.20 0.30 0.38 0.45 0.51 0.5610 0.60 0.64 0.68 0.72 0.75 0.78 0.81 0.83 0.86 0.8820 0.90 0.92 0.94 0.96 0.98 1.00 1.02 1.03 1.05 1.0630 1.08 1.09 1.11 1.12 1.13 1.15 1.16 1.17 1.18 1.1940 1.20 1.21 1.23 1.24 1.25 1.26 1.26 1.27 1.28 1.2950 1.30 1.31 1.32 1.33 1.34 1.34 1.35 1.36 1.37 1.3760 1.38 1.39 1.39 1.40 1.41 1.42 1.42 1.43 1.43 1.4470 1.45 1.45 1.46 1.47 1.47 1.48 1.48 1.49 1.49 1.5080 1.51 1.51 1.52 1.52 1.53 1.53 1.54 1.54 1.55 1.5590 1.56 1.56 1.57 1.57 1.58 1.58 1.58 1.59 1.59 1.60

100 1.60 1.61 1.61 1.61 1.62 1.62 1.63 1.63 1.64 1.64110 1.64 1.65 1.65 1.66 1.66 1.66 1.67 1.67 1.67 1.68120 1.68 1.68 1.69 1.69 1.70 1.70 1.70 1.71 1.71 1.71130 1.72 1.72 1.72 1.73 1.73 1.73 1.74 1.74 1.74 1.75140 1.75 1.75 1.75 1.76 1.76 1.76 1.77 1.77 1.77 1.78150 1.78 1.78 1.78 1.79 1.79 1.79 1.80 1.80 1.80 1.80160 1.81 1.81 1.81 1.81 1.82 1.82 1.82 1.82 1.83 1.83170 1.83 1.84 1.84 1.84 1.84 1.85 1.85 1.85 1.85 1.85180 1.86 1.86 1.86 1.86 1.87 1.87 1.87 1.87 1.88 1.88190 1.88 1.88 1.89 1.89 1.89 1.89 1.89 1.90 1.90 1.90200 1.90 1.91 1.91 1.91 1.91 1.91 1.92 1.92 1.92 1.92

TensHundreds 0 10 20 30 40 50 60 70 80 90

200 1.92 1.94 1.96 1.98 2.00 2.02 2.03 2.05 2.06300 2.08 2.09 2.11 2.12 2.13 2.15 2.16 2.17 2.18 2.19400 2.20 2.21 2.23 2.24 2.25 2.26 2.26 2.27 2.28 2.29500 2.30 2.31 2.32 2.33 2.34 2.34 2.35 2.36 2.37 2.37600 2.38 2.39 2.39 2.40 2.41 2.42 2.42 2.43 2.43 2.44700 2.45 2.45 2.46 2.47 2.47 2.48 2.48 2.49 2.49 2.50800 2.51 2.51 2.52 2.52 2.53 2.53 2.54 2.54 2.55 2.55900 2.56 2.56 2.57 2.57 2.58 2.58 2.58 2.59 2.59 2.60

TABLE D:Alkalinity Expressed as ppm CaCO3(for 1 to 209 ppm CaCO3, use upper table; for 210 to 990 ppm CaCO2, use lower table)

UnitsTens 0 1 2 3 4 5 6 7 8 9

0 0.00 0.30 0.48 0.60 0.70 0.78 0.85 0.90 0.9510 1.00 1.04 1.08 1.11 1.15 1.18 1.20 1.23 1.26 1.2920 1.30 1.32 1.34 1.36 1.38 1.40 1.42 1.43 1.45 1.4630 1.48 1.49 1.51 1.52 1.53 1.54 1.56 1.57 1.58 1.5940 1.60 1.61 1.62 1.63 1.64 1.65 1.66 1.67 1.68 1.6950 1.70 1.71 1.72 1.72 1.73 1.74 1.75 1.76 1.76 1.7760 1.78 1.79 1.79 1.80 1.81 1.81 1.82 1.83 1.83 1.8470 1.85 1.85 1.86 1.86 1.87 1.88 1.88 1.89 1.89 1.9080 1.90 1.91 1.91 1.92 1.92 1.93 1.93 1.94 1.94 1.9590 1.95 1.96 1.96 1.97 1.97 1.98 1.98 1.99 1.99 2.00

100 2.00 2.00 2.01 2.01 2.02 2.02 2.03 2.03 2.03 2.04110 2.04 2.05 2.05 2.05 2.06 2.06 2.06 2.07 2.07 2.08120 2.08 2.08 2.09 2.09 2.09 2.10 2.10 2.10 2.11 2.11130 2.11 2.12 2.12 2.12 2.13 2.13 2.13 2.14 2.14 2.14140 2.15 2.15 2.15 2.16 2.16 2.16 2.16 2.17 2.17 2.17150 2.18 2.18 2.18 2.18 2.19 2.19 2.19 2.20 2.20 2.20160 2.20 2.21 2.21 2.21 2.21 2.22 2.22 2.23 2.23 2.23170 2.23 2.23 2.23 2.24 2.24 2.24 2.24 2.25 2.25 2.25180 2.26 2.26 2.26 2.26 2.26 2.27 2.27 2.27 2.27 2.28190 2.28 2.28 2.28 2.29 2.29 2.29 2.29 2.29 2.30 2.30200 2.30 2.30 2.30 2.31 2.31 2.31 2.31 2.32 2.32 2.32

TensHundreds 0 10 20 30 40 50 60 70 80 90

200 2.32 2.34 2.36 2.38 2.40 2.42 2.43 2.45 2.46300 2.48 2.49 2.51 2.52 2.53 2.54 2.56 2.57 2.58 2.59400 2.60 2.61 2.62 2.63 2.64 2.65 2.66 2.67 2.68 2.69500 2.70 2.71 2.72 2.72 2.73 2.74 2.75 2.76 2.76 2.77600 2.78 2.79 2.79 2.80 2.81 2.81 2.82 2.83 2.83 2.84700 2.85 2.85 2.86 2.86 2.87 2.88 2.88 2.89 2.89 2.90800 2.90 2.91 2.91 2.92 2.92 2.93 2.93 2.94 2.94 2.95900 2.95 2.96 2.96 2.97 2.97 2.98 2.98 2.99 2.99 3.00

1. pHs = (9.30 + A + B) – (C + D)(Note. Values of A, B, C, & D are obtained from tables A, B, C, & D)

2. Saturation Index = pH – pHsIf index is 0, water is in chemical balance.If index is plus quantity, scale forming tendencies are indicated.If index is a minus quantity, corrosive tendencies are indicated.

Example: To find the saturation index at 124°F of water which has thefollowing characteristics: Total solids – 400 ppm; calcium hardness as CaCO3-240 ppm; alkalinity, and as CaCO3-196 ppm; and pH of 7.2 Then:

Total solids . . . . . . . . . . . . . . . . . . 400 ppm =0.16 (from table A)Temperature . . . . . . . . . . . . . . . . . 124°F =1.53 (from table B)Calcium hardness as CaCO3 . . . . . 240 ppm = 1.98 (from lower table C )Alkalinity as CaCO3 . . . . . . . . . . . . 196 ppm = 2.29 (from upper table D)

Substituting: pHs = (9.30 + 0.16 + 1.53 ) – (1.98 + 2.29) = 6.72 (or 6.7)

Saturation Index = 7.2 – 6.7 = +0.5

238



REFERENCE TABLES

Calcium Carbonate EquivalentsFormula, Atomic, Molecular and Equivalent Weights and Conversion Factors to CaCO3 ofSubstances Frequently Appearing in the Chemistry of Water Treatment

Aluminum Al 27.0 9.0 5.56 0.18Aluminum Chloride AlCl3 133.2 44.4 1.13 0.89Aluminum Chloride AlCl3 6H2O 241.5 80.5 0.62 1.61Aluminum Sulfate Al2(SO4)3;18H2O 666.4 111.1 0.45 2.22Aluminum Sulfate Al2(SO4)3 (anhydrous) 342.1 57.0 0.88 1.14Aluminum Hydrate Al(OH)3 78.0 26.0 1.92 0.52

Alumina Al2O3 101.9 17.0 2.94 0.34Sodium Aluminate Na2Al2O4 163.9 27.3 1.83 0.55

Ammonium Alum Al2(SO4)3 (NH4)

2SO4 24H2O 906.6 151.1 0.33 3.02

Potassium Alum Al2(SO4)3K2SO2 24H2O 948.8 156.1 0.82 3.12Ammonia NH3 17.0 17.0 2.94 0.34Ammonium (Ion) NH4 18.0 18.0 2.78 0.36Ammonium Chloride NH4Cl 53.5 53.5 0.94 1.07Ammonium Hydroxide NH4OH 35.1 35.1 1.43 0.70Ammonium Sulfate (NH4) 2SO4 132.2 66.1 0.76 1.32

Barium Ba 137.4 68.7 0.73 1.37Barium Carbonate BaCO3 197.4 98.7 0.51 1.97Barium Chloride BaCl2 2H2O 244.3 122.2 0.41 2.44Barium Hydroxide Ba(OH)2 171.4 85.7 0.59 1.71Barium Oxide BaO 153.4 76.7 0.65 1.53Barium Sulfate BaSO4 233.4 116.7 0.43 2.33

Calcium Ca 40.1 20.0 2.50 0.40Calcium Bicarbonate Ca(HCO3)2 162.1 81.1 0.62 1.62Calcium Carbonate CaCO3 100.08 50.1 1.00 1.00Calcium Chloride CaCl2 111.0 55.5 0.90 1.11Calcium Hydrate Ca(OH)2 74.1 37.1 1.35 0.74Calcium Hypochlorite Ca(ClO)2 143.1 35.8 0.70 1.43Calcium Oxide CaO 56.1 28.0 1.79 0.56Calcium Sulfate CaSO4 (anhydrous) 136.1 68.1 0.74 1.36Calcium Sulfate CaSO4 2H2O (gypsum) 172.2 86.1 0.58 1.72Calcium Nitrate Ca(NO3)2 164.1 82.1 0.61 1.64Calcium Phosphate Ca3(PO4)2 310.3 51.7 0.97 1.03

Carbon C 12.0 3.0 16.67 0.06

Chlorine (Ion) Cl 35.5 35.5 1.41 0.71

Copper (Cupric) Cu 63.6 31.8 1.57 0.64Copper Sulfate (Cupric) CuSO4 160.0 80.0 0.63 1.60Copper Sulfate (Cupric) CuSO4 5H2O 250.0 125.0 0.40 2.50

Multiplying FactorConsidering Molecular

Wt. of CaCO3 as 100

Substance Formula Atomic or Equivalent Substance CaCO3Molecular Weight to CaCO3 equivalent

Weight equivalent to substance


Wt. of CaCO3 as 100


Weight equivalent tosubstance

Iron (Ferrous) Fe’’ 55.8 27.9 1.79 0.56Iron (Ferric) Fe’’’ 55.8 18.6 2.69 0.37Ferrous Carbonate FeCO3 115.8 57.9 0.86 1.16Ferrous Hydroxide Fe (OH)2 89.9 44.9 1.11 0.90Ferrous Oxide FeO 71.8 35.9 1.39 0.72Ferrous Sulfate FeSO4 (anhydrous) 151.9 76.0 0.66 1.52Ferrous Sulfate FeSO4 7H2O 278.0 139.0 0.36 2.78Ferrous Sulfate FeSO4 (anhydrous) 151.9 151.9 oxidation

Ferric Chloride FeCl3 162.3 54.1 0.93 1.08Ferric Chloride FeCl3 6H2O 270.3 90.1 0.56 1.80Ferric Hydroxide Fe (OH)3 106.8 35.6 1.41 0.71Ferric Oxide Fe2O3 159.6 26.6 1.88 0.53Ferric Sulfate (Ferrisul) Fe2 (SO4)3 399.9 66.7 0.75 1.33Ferrous or Ferric Fe or Fe 55.8 55.8 oxidation

Fluorine F 19.0 19.0 2.66 0.38

Hydrogen (Ion) H 1.01 1.01 50.0 0.02

Iodine I 127.0 127.0 0.40 2.54

Lead Pb 207.0 103.5 0.48 2.08

Magnesium Mg 24.3 12.2 4.12 0.24Magnesium Oxide MgO 40.3 20.2 2.48 0.40Magnesium Bicarbonate Mg (HCO3)2 146.3 73.2 0.68 1.46Magnesium Carbonate MgCO3 84.3 42.2 1.19 0.84Magnesium Chloride MgCl2 95.3 47.7 1.05 0.95Magnesium Chloride

(Hexahydrate) MgCl2 6H2O 203.2 101.6 0.49 2.03 Magnesium Hydrate Mg(OH)2 58.3 29.2 1.71 0.58Magnesium Nitrate Mg(NO3)2 148.3 74.2 0.67 1.48Magnesium Phosphate Mg3(PO4)2 262.9 43.8 1.14 0.88Magnesium Sulfate MgSO4 120.4 60.2 0.83 1.20Magnesium Sulfate

(Epsom Salt) MgSO4 7H2O 246.4 123.2 0.406 2.46Manganese

(Manganous) Mn’’ 54.9 27.5 1.82 0.55Manganese (Manganic) Mn’’’ 54.9 18.3 2.73 0.37Manganese Chloride MnCl2 125.8 62.9 0.80 1.26Manganese Dioxide MnO2 86.9 21.7 2.30 0.43Manganese Hydrate Mn(OH)2 89.0 44.4 1.13 0.89Manganic Oxide Mn2O3 157.8 26.3 1.90 0.53Manganous Oxide MnO 70.9 35.5 1.41 0.71

239




REFERENCE TABLES


Wt. of CaCO3 as 100


Weight equivalent to substance


Wt. of CaCO3 as 100


Weight equivalent tosubstance

Nitrate (Ion) NO3 62.0 62.0 0.81 1.24

Nitric Acid HNO3 63.0 63.0 0.79 1.26

Nitrogen (Valence 3) N’’’ 14.0 4.7 10.8 0.093

Nitrogen (Valence 5) N’’’’’ 14.0 2.8 17.9 0.056

Oxygen O 16.0 8.0 6.25 0.16

Phosphorus (Valence 3) P’’’ 31.0 10.3 4.76 0.21

Phosphorus (Valence 5) P’’’’’ 31.0 6.2 8.33 0.12

Potassium K 39.1 39.1 1.28 0.78

Potassium Carbonate K2CO3 138.0 69.1 0.72 1.38

Potassium Chloride KCl 74.6 74.6 0.67 1.49

Potassium Hydroxide KOH 56.1 56.1 0.88 1.12

Silver Chloride AgCl 143.3 143.3 0.35 2.87

Silver Nitrate AgNO3 169.9 169.9 0.29 3.40

Silica SiO2 60.1 60.1 0.83 1.2

Silicon (Valence 4) Si’’’’ 28.1 7.03 7.14 0.14

Sodium Na 23.0 23.0 2.18 0.46

Sodium Bicarbonate NaHCO3 84.0 84.0 0.60 1.68

Sodium Bisulfate NaHSO4 120.1 120.1 0.42 2.40

Sodium Bisulfite NaHSO3 104.1 104.1 0.48 2.08

Sodium Carbonate Na2CO3 106.0 53.0 0.94 1.06

Sodium Chloride NaCl 58.5 58.5 0.85 1.17

Sodium Hypochlorite NaClO 74.5 37.3 0 .67 1.49

Sodium Hydroxide NaOH 40.0 40.0 1.25 0.80

Sodium Nitrate NaNO3 85.0 85.0 0.59 1.70

Sodium Nitrite NaNO2 69.0 69.0 0.73 1.38

Sodium Oxide Na2O 62.0 31.0 1.61 0.62

Tri-sodium Phosphate Na3PO4 12H2O

(18.7% P2O5) 380.2 126.7 0.40 2.53

Tri-sodium Phosphate

(anhydrous) Na3PO4 (43.2% P2O5) 164.0 54.7 0.91 1.09

Di-sodium Phosphate Na2HPO4 12H2O

(19.8% P2O5) 358.2 119.4 0.42 2.39

Di-sodium Phosphate

(anhydrous) Na2HPO4 (50% P2O5) 142.0 47.3 1.06 0.95

Monosodium Phosphate NaH2PO4 H2O

(51.4% P2O5) 138.1 46.0 1.09 0.92

Mono-sod. (anhydrous) NaH2PO4 (59.1% P2O5) 120.0 40.0 1.25 0.80

Meta-Phosphate

(Hagan) NaPO3 (69% P2O5) 102.0 34.0 1.47 0.68

Sodium Sulfate Na2SO4 142.1 71.0 0.70 1.42

Sodium Thiosulfate Na2S2O3 158.1 158.1 0.63 1.59

Sodium Tetrathionate Na2S4O6 270.2 135.1 0.37 2.71

Sodium Sulfite Na2SO3 126.1 63.0 0.79 1.26

Strontium Sr 87.6 43.8 1.14 0.88

Sulfur (Valence2) S’’ 32.1 16.0 3.13 0.32

Sulfur (Valence4) S’’’’ 32.1 8.02 6.25 0.16

Sulfur (Valence 6) S’’’’’’ 32.1 5.34 9.10 0.11

Sulfur Dioxide SO2 64.1 32.0 1.56 0.64

Tin (Valence 2) Sn’’ 119.0 59.5 0.84 1.19

Water H2O 18.0 9.00 5.56 0.18

Zinc (Valence 2) Zn’’ 65.4 32.7 1.54 0.65

ACID RADICALSBicarbonate HCO3 61.0 61.0 0.82 1.22

Carbonate CO3 60.0 30.0 1.67 .60

Carbon Dioxide CO2 44.0 44.0 1.14 .88

Chloride Cl 35.5 35.5 1.41 .71

Iodide l 126.9 126.9 0.40 2.54

Nitrate NO3 62.0 62.0 0.81 1.24

Hydroxyl OH 17.0 17.0 2.94 0.34

Phosphate PO4 95.0 31.7 1.58 0.63

Phosphorous Oxide P2O5 142.0 23.7 2.11 0.47

Sulfide (Valence 2) S’’ 32.1 16.0 3.11 0.32

Sulfate SO4 96.1 48.0 1.04 0.96

Sulfur Trioxide SO3 80.1 40.0 1.25 0.80

ACIDSHydrogen H 1.0 1.0 50.00 0.02

Acetic Acid HC2H3O2 60.1 60.1 0.83 1.20

Carbonic Acid H2CO3 62.0 31.0 1.61 0.62

Hydrochloric Acid HCl 36.5 36.5 1.37 0.73

Phosphoric Acid H3PO4 98.0 32.7 1.53 0.65

Sulfurous Acid H2SO3 82.1 41.1 1.22 0.82

Sulfuric Acid H2SO4 98.1 49.0 1.02 0.98

Hydrogen Sulfide H2S – – – –

Manganous Acid H2MnO3 104.9 52.5 0.95 1.05

240



REFERENCE TABLES

Equivalents

EQUIVALENTS OF PRESSURE AND HEAD

(1) To Obtain pound/in2 pound/ft2 Atmospheres kg/cm2 kg/m2 inch water foot water inch mercury mm mercury bar** megapascal(68°F) (68°F) (32°F)* (32°F)* (MPa)**

(2) Multiply (3) By

pound/in2 1 144 0.068046 0.070307 703.070 27.7276 2.3106 2.03602 51.7150 0.06895 0.006895pound/ft2 0.0069445 1 0.000473 0.000488 4.8241 0.1926 0.01606 0.014139 0.35913 0.000479 0.0000479Atmospheres 14.696 2116.22 1 1.0332 10332.27 407.484 33.9570 299.921 760 1.01325 0.101325kg/cm2 14.2233 2048.155 0.96784 1 10000 394.38 32.8650 28.959 735.559 0.98067 0.098067kg/m6 0.001422 0.204768 0.0000968 0.0001 1 0.3944 0.003287 0.002896 0.073556 0.000098 0.0000098inch water* 0.036092 5.1972 .002454 0.00253 25.375 1 0.08333 0.073430 1.8651 0.00249 0.000249foot water* 0.432781 62.3205 0.029449 0.03043 304.275 12 1 0.88115 22.3813 0.029839 0.0029839inch mercury** 0.491154 70.7262 0.033421 0.03453 345.316 13.6185 1.1349 1 25.40005 0.033864 0.0033864mm mercury** 0.0193368 2.78450 0.0013158 0.0013595 13.59509 0.53616 0.044680 0.03937 1 0.001333 0.0001333bar** 14.5038 2088.55 0.98692 1.01972 10197.2 402.156 33.5130 29.5300 750.062 1 0.10MPa** 145.038 20885.5 9.8692 10.1972 101972.0 4021.56 335.130 295.300 7500.62 10.0 1

*Water at 68°F (20°C) Mercury at 32°F (0°C) **MPa (megapascal) = 10 bar = 1,000,000 N/m2 (newton/meter2)

EQUIVALENTS OF LIQUID MEASURES AND WEIGHTS

(1) To Obtain Gallon Imperial Gallon Pint Pound Water* Cubic Foot Cubic Inch Liter Cubic Meter

(2) Multiply (3) By

Gallon 1 0.833 8 8.337 0.13368 231 3.78533 0.003785

Imperial Gallon 1.2009 1 9.60752 10 0.16054 277.42 4.54596 0.004546

Pint 0.125 0.1041 1 1.042 0.01671 28.875 0.473166 0.000473

Pound Water* 0.11995 0.1 0.9596 1 0.016035 27.708 0.45405 0.000454

Cubic Foot 7.48052 6.22888 59.8442 62.365 1 1728 2831702 0.028317

Cubic Inch 0.004329 0.00361 0.034632 0.03609 0.0005787 1 0.016387 0.0000164

Liter 0.2641779 0.2199756 2.113423 2.202 0.0353154 61.02509 1 0.001000

Cubic Meter 264.170 219.969 2113.34 2202 35.31446 61023.38 999.972 1

*Water at 60°F (15.6°C) 1 Barrel = 42 gallons (petroleum measure)

s

s s

s

s s

EQUIVALENTS OF FLOW RATE

(1) To Obtain gpm gpd lpm m3/hr ft3/min pound/min

(2) Multiply (3) By

gpm. . . . . . . . . . . . . . . . . . . 1. . . . . . . . 1440. . . . . . . . 3.785. . . . . . . . 0.2271. . . . . . . . . 0.1337. . . . . . . . . 8.337gpd . . . . . . . . . . . . . . . . . . . 0.000694. . . . . . . . 1. . . . . . . . 0.00263. . . . . . . . 0.000158. . . . . . . . . 9.284 x 10-5. . . . . . . . . 0.00579lpm . . . . . . . . . . . . . . . . . . . 0.2642. . . . . . . . 380. . . . . . . . 1. . . . . . . . 0.06. . . . . . . . . 0.0353. . . . . . . . . 2.202m3/hr . . . . . . . . . . . . . . . . . . 4.403. . . . . . . . 6370. . . . . . . . 16.67. . . . . . . . 1. . . . . . . . . 0.588. . . . . . . . . 36.71ft3/min . . . . . . . . . . . . . . . . . 7.48. . . . . . . . 10771.2. . . . . . . . 28.3. . . . . . . . 1.7. . . . . . . . . 1. . . . . . . . . 3750pound/min . . . . . . . . . . . . . . 0.1199. . . . . . . . 172.72. . . . . . . . 0.454. . . . . . . . 0.2724. . . . . . . . . 0.00267. . . . . . . . . 1

s

s s

241




REFERENCE TABLES

Temperature Conversion, Tank Areas and Volume

TANK AREAS AND VOLUMES*

Area = sq. ft. or cu. ft. per ft. of depth U.S. Gallons per ft of depthNominal Diameter Unlined Lined Unlined Lined

12” . . . . . . . . . . . . . . . . . . 0.785 . . . . . . . . . . . . 0.765 . . . . . . . . . . . . 5.87. . . . . . . . . . . 5.7314” . . . . . . . . . . . . . . . . . . 1.069 . . . . . . . . . . . . 1.049 . . . . . . . . . . . . 8.0. . . . . . . . . . . . 7.8616” . . . . . . . . . . . . . . . . . . 1.396 . . . . . . . . . . . . 1.372 . . . . . . . . . . . . 10.44. . . . . . . . . . . 10.2718” . . . . . . . . . . . . . . . . . . 1.767 . . . . . . . . . . . . 1.748 . . . . . . . . . . . . 13.22. . . . . . . . . . . 13.0920” . . . . . . . . . . . . . . . . . . 2.182 . . . . . . . . . . . . 2.157 . . . . . . . . . . . . 16.32. . . . . . . . . . . 16.1224” . . . . . . . . . . . . . . . . . . 3.142 . . . . . . . . . . . . 3.104 . . . . . . . . . . . . 23.50. . . . . . . . . . . 23.2030” . . . . . . . . . . . . . . . . . . 4.784 . . . . . . . . . . . . 4.703 . . . . . . . . . . . . 35.8. . . . . . . . . . . . 35.236” . . . . . . . . . . . . . . . . . . 6.918 . . . . . . . . . . . . 6.821 . . . . . . . . . . . . 51.8. . . . . . . . . . . . 51.042” . . . . . . . . . . . . . . . . . . 9.444 . . . . . . . . . . . . 9.33 . . . . . . . . . . . . . 70.6. . . . . . . . . . . . 69.848” . . . . . . . . . . . . . . . . . . 12.36 . . . . . . . . . . . . . 12.24 . . . . . . . . . . . . . 92.5. . . . . . . . . . . . 91.654” . . . . . . . . . . . . . . . . . . 15.67 . . . . . . . . . . . . . 15.53 . . . . . . . . . . . . . 117.0. . . . . . . . . . . . 116.060” . . . . . . . . . . . . . . . . . . 19.37 . . . . . . . . . . . . . 19.22 . . . . . . . . . . . . . 145.0. . . . . . . . . . . . 144.066” . . . . . . . . . . . . . . . . . . 23.47 . . . . . . . . . . . . . 23.30 . . . . . . . . . . . . . 176.0. . . . . . . . . . . . 174.072” . . . . . . . . . . . . . . . . . . 27.96 . . . . . . . . . . . . . 27.77 . . . . . . . . . . . . . 209.0. . . . . . . . . . . . 208.078” . . . . . . . . . . . . . . . . . . 32.84 . . . . . . . . . . . . . 32.63 . . . . . . . . . . . . . 246.0. . . . . . . . . . . . 244.084” . . . . . . . . . . . . . . . . . . 38.0 . . . . . . . . . . . . . . 37.77 . . . . . . . . . . . . . 284.0. . . . . . . . . . . . 283.090” . . . . . . . . . . . . . . . . . . 43.67 . . . . . . . . . . . . . 43.42 . . . . . . . . . . . . . 327.0. . . . . . . . . . . . 325.096” . . . . . . . . . . . . . . . . . . 49.71 . . . . . . . . . . . . . 49.45 . . . . . . . . . . . . . 372.0. . . . . . . . . . . . 370.0102” . . . . . . . . . . . . . . . . . 56.15 . . . . . . . . . . . . . 55.8 . . . . . . . . . . . . . . 420.0. . . . . . . . . . . . 418.0108” . . . . . . . . . . . . . . . . . 62.99 . . . . . . . . . . . . . 62.70 . . . . . . . . . . . . . 471.0. . . . . . . . . . . . 469.0114” . . . . . . . . . . . . . . . . . 70.07 . . . . . . . . . . . . . 69.91 . . . . . . . . . . . . . 524.0. . . . . . . . . . . . 523.0120” . . . . . . . . . . . . . . . . . 77.68 . . . . . . . . . . . . . 77.51 . . . . . . . . . . . . . 581.0. . . . . . . . . . . . 580.0126” . . . . . . . . . . . . . . . . . 85.68 . . . . . . . . . . . . . 85.51 . . . . . . . . . . . . . 641.0. . . . . . . . . . . . 640.0132” . . . . . . . . . . . . . . . . . 94.07 . . . . . . . . . . . . . 93.89 . . . . . . . . . . . . . 704.0. . . . . . . . . . . . 702.0

*These figures are actual values that have been corrected for shell thickness and true inside diameter measurements. Lining is 3/23" up to 60"; 1/8" above 60".

FAHRENHEIT/CENTIGRADE TEMPERATURE CONVERSION CHART

212° 32°

320° 290° 260° 230° 200° 170° 140° 110° 80° 50° 20° -10° -40°

160° 140° 120° 100° 80° 60° 40° 20° 0° -20° -40°

°C

°F

242



REFERENCE TABLES

Relative Size of Particles

Carbon Black Beach SandJewelers Rouge

Pollens

A KEY TO THE RELATIVE SIZES OF PARTICLES

Clouds/Fog Drizzle

Virus Bacteria Mist

Electron MicroscopyColloidal

Suspended Matter

Lung-Damaging DustPleuro-Pneumonia-Like

Organisms

Ultrafiltration MacrofiltrationMicrofiltration

0.0010.001

0.002

0.004

0.0060.0080.01

0.02

0.04

0.040.080.1

0.2

0.4

0.60.881.0

2 4 6 8 10 20 40 60 80 100

200

400

6008001000

Microm

etersµm

Tobacco Smoke

Polio Virus

Pseudomonas Dim

inuta Organism

Serratia Marcescens O

rganism

Pseudomonas Cepacia O

rganism

Yeasts and FungiRed Blood Cell

Aluminum

FoilRagweed Pollen

Smallest Visible Particle

Flour

Human Hair Diam

eter

Razer Blade Thickness

Sewing NeedleDiam

eter

243REFERENCE TABLES

Velocity of Liquids in Pipes




ExampleGiven: Maximum flow rate of a liquid will be 300 gpm with maximum velocity limited to 12 feet persecond through Schedule 40 pipe.

Find: The smallest pipe size and the velocity through thepipe.

Solution:

VELOCITY OF LIQUIDS IN PIPE

The mean velocity of any flowing liquid can be calculated from the following formula, or from the nomographto the right. The nomograph is a graphical solution of theformula.

n = 183.3 q/d2 = 0.408 Q/d = 0.0509 W/d2ρ

(where d2 is the square of the inside diameter of commercialwrought steel pipe)

The pressure drop per 100 feet and the velocity in schedule 40 pipe, for water at 60°F, have been calculatedfor commonly used flow rates for pipe sizes of 1/8 to 24 inch.

Connect Read1. Q = 300 v = 12 d = 2.752. 3 " Schedule 40 pipe suitable3. Q = 300 3" Sched 40 ν = 10

W

ν

dρ

qQ

Reasonable Velocities for the Flow of Water through PipeService Condition Reasonable VelocityBoiler Feed . . . . . . . . . . . . . . . . . . . . . . . . . 8 to 15 ft per secondPump suction and drain lines . . . . . . . . . . . . 4 to 7 ft per secondGeneral Service . . . . . . . . . . . . . . . . . . . . . 4 to 10 ft per secondCity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . to 7 ft per second

Information contained here was obtained from “Flow of Fluids through Valves, Fittings and Pipe”, Copyright 1969 Crane Co.




BACK


Index and Glossary

GLOSSARY OF KEY TERMS .................................................................246

TRADEMARK STATEMENT ...................................................................253

T A B L E O F

C O N T E N T S

245

246


BACK

AABSOLUTE: A degree of filtration, usually referring to 99.9999%removal of particulates greater than a stated size.

ACID: A substance that releases hydrogen ions when dissolved inwater. Most acids will dissolve common metals, and will reactwith a base to form a neutral salt and water. A chemical used toregenerate cation ion exchange resin.

ACIDITY: An expression of the concentration of hydrogen ionspresent in a solution.

ACTIVATED CARBON: Carbon activated by high temperaturesteam or carbon dioxide to form a material of high adsorptivecapacity. A porous material available in powdered or granularform, activated carbon is used primarily for the removal ofchlorine and chloramines or dissolved organic matter.

ALKALINITY: In natural water, alkalinity results from the presenceof CO2, bicarbonate, carbonate, and hydroxide components. Thealkalinity test measures the quantity of alkaline materials inwater, whereas, the pH test indicates whether a water sample isacidic or basic.

ALUM: Aluminum sulfate [Al(SO4)3 • 18 H2O], widely used forflocculation of contaminants in municipal water treatment,typically for the removal of color and turbidity.

ANION: A negatively charged ion.

ANTHRACITE: A granular, hard coal, used sometimes as a sandfilter media. In an activated form, anthracite is commonly usedfor organic and chlorine removal (activated carbon) from water.

ANTI-TELESCOPING DEVICE (ATD): A plastic cover that looks like awheel with spokes, and is attached to the ends of a spiral woundRO cartridge to prevent distortion of the cartridge leaves causedby high flows.

AVERAGE TRANSMEMBRANE PRESSURE: Average transmembranepressure is the actual net driving force of water within a UF orRO module. It is determined as follows:

200 psi = RO feed pressure

+190 psi = RO reject pressure

390 ÷2 = 195 195 = average transmembrane pressure (assuming the permeatepressure is 0)

BBACKFLOW: Flow of water in a pipe or line in a direction oppositeto the normal flow. Often associated with the flow of possiblycontaminated water into a potable water system.

BACKWASH: The process in which beds of filter or ion exchangemedia are subjected to flow in the opposite direction from theservice flow to loosen the bed and flush out suspended matter.

BACTERIA: Unicellular microorganisms that typically reproduceby cell division. May or may not be harmful to humans.

BASE: A substance that releases hydroxyl ions when dissolved inwater. Bases react with acids to form a neutral salt and water.

BED DEPTH: The depth of the filter medium or ion exchangeresin in a vessel.

BED EXPANSION: The effect produced during backwashing: theresin particles become separated and rise in the column. Thisexpansion of the bed, caused by the increase in the spacebetween the resin particles, may be controlled by regulatingbackwash flow.

BOD (BIOCHEMICAL OXYGEN DEMAND): The amount of oxygenutilized by natural agencies in stabilizing organic matter atspecified test conditions.

BRACKISH WATER: Water containing dissolved solids in the rangeof 1,000 to 10,000 mg/L.

BRINE: A solution of sodium chloride (salt) used for regeneratingwater softeners. A mixed sodium, calcium and magnesiumchloride solution is the resulting waste solution fromregeneration.

BRINE SEAL: A rubber lip on the outside of a spiral wound ROcartridge that prevents feed bypass between the cartridge andthe inside pressure vessel wall.

BRINE STREAM: The reject stream from an RO cartridge. Portionof the feed stream that does not pass through the membrane.

BUBBLE POINT TEST: Used to test the integrity of 0.22 and 0.45micron microporous filters.

BUFFER: A chemical that causes a solution to resist changes inpH, or to shift the pH to a specific value.

CCALCIUM CARBONATE EQUIVALENT: A common basis forexpressing the concentration of hardness and other salts inchemically equivalent terms to simplify certain calculations.Signifies that the concentration of a dissolved mineral ischemically equivalent to the stated concentration of calciumcarbonate.

CAPACITY: The absorption ability possessed per unit of resinvolume or per unit of weight (i.e., the potential for exchange).For water softeners, the capacity is expressed in grains of

GLOSSARY

The following is a glossary of frequently used water treatment terms.


247




GLOSSARY

hardness removal between regenerations, and is related to thepounds of salt used in regeneration.

CAPACITY CURVE: A graph of capacity vs. regenerant levels for anion exchange unit or system.

CATION: A positively charged ion.

CAUSTIC: Any substance that releases hydroxide ions whendissolved in water. A chemical used to regenerate anion ionexchange resin.

CAVITATION: Caused by pump starvation, cavitation is a cracklingnoise caused by bubbles imploding on the tip of impellers insidethe pump.

CHANNELING: The flow of water or other solution in a limitednumber of passages in a filter or ion exchange bed, instead ofdistributed flow through all the passages in the bed. May becaused by fouling of the bed and plugging of many passages,poor distributor design, flow rates that are too low, or faultyoperational procedures.

CHEMICAL FEEDER: A mechanical device designed to introducechemicals into a water system in proportion to water flow.

CHEVRON SEAL: A rubber lip on the outside of a spiral wound ROcartridge that prevents feed bypass between the cartridge andthe inside pressure vessel wall.

CHLORAMINES: Compounds formed when chlorine and ammoniaare mixed in water. Used to kill bacteria in water, chloramines canbe inadvertently formed in chlorinated water supplies that containnitrogenous impurities. If present in water used for dialysatepreparation, chloramines can cause illness (particularly anemia) indialyzing patients. Can be removed by activated carbon.Chloramine level can be determined by subtracting the freechlorine level from the total chlorine level.

CHLORINATION: The process of water treatment whereby a chlorinegas or liquid solution is injected into a water supply to controlmicroorganisms. The feed, demand and residual chlorine areexpressed as ppm.

CHLORINE DEMAND: A measure of the amount of chlorine that willbe consumed by organic matter and other oxidizable substancesin a water before a chlorine residual will be found. The differencebetween the total chlorine fed and the chlorine residual.

CHLORINE, FREE AVAILABLE: The hypochlorite ions (OCI -),hypochlorous acid (HOCl) or the combination thereof present inwater.

CLARIFIER: A tank in which precipitate settles.

COAGULANT: A material, such as alum, which will form agelatinous precipitate in water, and cause the agglomeration offinely divided particles into larger particles which can beremoved by settling and/or filtration.

COD (CHEMICAL OXYGEN DEMAND): The amount of oxygenrequired under specified test conditions for the oxidation ofwater borned organic and inorganic matter.

COLIFORM BACTERIA: A group of organisms primarily found inhuman and animal intestines and wastes, and thus widely usedas indicator organisms to show the presence of such wastes inwater, and the possible presence of disease-producing bacteria.

COLLOID: A substance of very fine particle size, typically between0.1 and 0.001 microns in diameter suspended in liquid ordispersed in gas. A system of at least two phases, including acontinuous liquid plus solid, liquid or gaseous particles so smallthat they remain in dispersion for a practicable time.

COLLOIDAL DENSITY INDEX: A test used to verify the performanceof point-of-use ultrafiltration systems. The test, which is verysimilar to silt density index (SDI), is used to measure colloidalconcentration upstream and downstream of the system. It isassumed that the feedwater to the system will be of very highquality, rendering the SDI test invalid.

COLONY-FORMING UNITS (CFU): Unit used in the measure of totalbacteria count.

COLOR: Dissolved or suspended matter causing discoloration ofthe water. Expressed as alpha units.

COMPACTION: The tightening of a membrane structure due tocompressive stress of operating pressure.

CONCENTRATION POLARIZATION: The phenomenon that occurswhen material retained by the membrane builds up on themembrane surface and forms a boundary layer immediatelyadjacent to the membrane surface. Over time, this layer causes adecrease in flux.

CONDUCTIVITY: The electrical measurement of the water’s abilityto pass electric current. It is dependent on temperature and totalconcentration of ionized substances in solution. The lower thelevel of ionized substances, the lower the conductivity.Conductivity is inverse of resistivity and is measured inmicrosiemens/cm.

CONTINUOUS ELECTRODEIONIZATION (CEDI): A process that uses ionexchange membranes, ion exchange resins and electricity toproduce consistent high-purity water without the need forchemical regeneration. CEDI removes dissolved, ionizable materialssuch as dissolved silica, carbon dioxide and some organics.

CONVERSION: The percentage of feed water that ends up as theproduct, or permeate. Also known as recovery.

CROSSFLOW MEMBRANE FILTRATION: A separation of thecomponents of a fluid by semipermeable membranes throughthe application of pressure and tangential flow to the membranesurface. Includes the processes of reverse osmosis, ultrafiltration,nanofiltration, and microfiltration.

248


BACK

DDECARBONATOR: A device to remove carbon dioxide from water.

DECAT WATER: Water that has an absence of cations. Usuallyproduced by a cation resin regenerated with acid.

DEGASIFICATION: The process of removing dissolved gasses inwater.

DEIONIZATION: The removal of all ionized minerals and salts (bothorganic and inorganic) from a solution by ion exchange.Positively charges ions are removed by a cation exchange resinin exchange for a chemically equivalent amount of hydrogenions. Negatively charged ions are removed by anion exchangeresin for a chemically equivalent amount of hydroxide ions. Thehydrogen and hydroxide ions introduced in this process unite toform water molecules. The term is often used interchangeablywith demineralization.

DEMINERALIZATION: The process of removing minerals fromwater, usually through deionization, reverse osmosis, ordistillation.

DEPTH FILTER: A filter of compacted sand, or diatomaceousearth; sintered metal or glass; spool wound cotton fiber; orcompressed, matted fibers. Particles are retained in and on anyor all of the above by random adsorption or entrapment withinthe matrix of the filters. Efficiency of depth filters are rated innominal terms.

DIALYSATE: The solution used in an artificial kidney machine toremove excess fluids and metabolic end products from the blood.

DIALYSIS: The separation of components of a solution bydiffusion through a semi-permeable membrane which is capableof passing certain ions or molecules while rejecting others.

DIATOMACEOUS EARTH: A powder-like filter media made fromcrushed diatoms capable of submicron particle removal.

DIFFERENTIAL PRESSURE: The difference in pressure betweentwo given points in a water system. May be due to differences inelevation, or to friction losses or pressure drops due to resistanceto flow in pipes, softeners, filters or other devices.

DISINFECTION: The process of killing disease-producing bacteria.

DISSOLVED IRON: In water conditioning, iron is usuallydescribed as being dissolved or undissolved. The dissolved orferrous iron is ver y soluble in most water, and theundissolved ferric iron is almost always insoluble.

DISSOLVED SOLIDS: The residual material remaining after filteringthe suspended material from water and evaporating the solutionto a dry state.

DISTILLATION: The process in which a liquid, such as water, isconverted into its vapor state by heating, and the vapor cooledand condensed to the liquid state and collected. Used to removesolids and other impurities from water.

DISTRIBUTOR: Used within softener or DI tank to distribute theflow of water throughout the tank and to prevent resin fromescaping the vessel. Sometimes called a strainer.

EE. COLI: Escherichia coli, one of the members of the coliformgroup of bacteria associated with animal and human waste.Normally used by health departments to rule on the purity of adrinking water supply.

EFFLUENT: The water emerging from a treatment unit, system orprocess, such as the product from an ion exchange unit.

ELECTRODEIONIZATION: A process that removes ionizable speciesfrom liquids using an electrically active media and an electricalpotential to influence ion transport.

ELECTROLYTE: A chemical compound that dissociates or ionizesin water to produce a solution that will conduct an electricalcurrent; an acid, base, or salt.

ELEMENT: Usually another term for filter or cartridge.

EXHAUSTION: The state in which resin is no longer capable ofuseful ion exchange. The depletion of the exchanger’s supply ofavailable ions. The exhaustion point is determined in terms of a).a value in parts per million of ions in the effluent solution, b).the reduction in quality of the effluent water determined by aconductivity bridge which measures the electrical resistance ofthe water.

FFEED: Raw or untreated water entering a water purificationsystem or ion exchange system for further treatment or“polishing”.

FILTRATE: Also called permeate or product, filtrate is the purifiedportion of a solution that passes through a membrane.

FINES: Extremely small particles of filter media or ion exchangematerial, formed either in the manufacturing process or as aresult of breakdown. Undesirable in most systems because ofhigh pressure drop.

FLOCCULATION: The agglomeration of finely divided suspendedsolids into larger, usually gelatinous, particles. Thedevelopment of a “floc” after treatment with a coagulant bygentle stirring or mixing.

GLOSSARY


249




GLOSSARY

FLUX: The rate of fluid passage through a given area ofmembrane per unit of time. Usually expressed in gallons persquare foot per day (gfd).

FORMALIN: A clear, aqueous solution of formaldehyde and asmall amount of methanol, used as a sanitant.

FORWARD AIR FLOW TEST: Also called “diffusion test” and“integrity test”, the forward air flow test is a measurement of thevolume of gas which will pass through a membrane at a givenpressure. Used to detect any flaws in the integrity of membranesor seals. In critical applications, this test should be performedprior to each process run.

FOULING: The rapid reduction in flux, caused by the build-up ofretained material on the membrane surface. The process inwhich undesirable foreign matter accumulates in a bed of filtermedia or ion exchanger, clogging pores and coating surfacesand thus preventing proper operation of the bed. Typicalsymptoms of fouling are: a decrease in rated product flow (flux),a decrease in percent salt rejection (RO membrane only), a rapidincrease of feed vs. reject differential pressure.

FOULING INDEX: Used synonymously with the terms “pluggagetest” and “silt density index”. A test used to determine theconcentration of colloids and particles in water fed to RO or UFsystems. The test results can be used to determine theeffectiveness of pretreatment systems and/or the need forpretreatment. Silt density index is also the best method topredict fouling characteristics caused by undissolvedcontaminants.

GGRAINS CAPACITY: The amount of minerals that will be removedby a specific quantity of resin.

GRAM NEGATIVE BACTERIA: A type of bacteria capable ofsurviving and multiplying in all types of waters, even thosetreated by reverse osmosis, deionization, softeners, anddistillation. Dead gram negative bacteria contain bacterialendotoxin, or pyrogens, that cause a fever when injected intothe bloodstream.

GREENSAND: A mineral (glauconite), used as a filtration medium.

HHARDNESS: The solution of calcium and magnesium as cationsindependent of the nature of anions present. Generallyexpressed in terms of calcium carbonate.

HARDNESS LEAKAGE: The presence of hardness minerals(calcium and magnesium) after water has passed through thesoftener. Hardness leakage is caused primarily by resin bedchanneling, due to improper backwashing, the existence ofalgae, or a combination of a high service flow with a highhardness content.

HIGH-PURITY WATER: Highly treated water with attention tomicrobiological, particle, organics and mineral reduction orelimination.

IINFLUENT: The water entering a treatment unit, system orprocess, such as the feed entering an ion exchange unit.

ION EXCHANGE: A process in which certain ions of a given chargemay be absorbed from solution and replaced in the solution bydifferent ions of a similar charge from the resin.

LLAL: Abbreviation for Limulus Amebocyte Lysate, a reagent usedto detect endotoxins (pyrogens) in a water supply.

LANGELIER SATURATION INDEX: A measure of the probability ofwhether water will precipitate or dissolve calcium carbonate,which forms scaling on the walls of pipes and RO membranes.The index is calculated from the total calcium, alkalinity, pH,temperature, and total dissolved solids of the water. A positiveindex indicates scaling tendencies, while a negative indexindicates that scaling will not occur.

LEAKAGE: The phenomenon in which some of the influent ionsare not removed and appear in the effluent of an ion exchangesystem. Leakage may be caused by incomplete regeneration,excessive flow rates, low temperatures, the concentration orcharacteristics of the influent ions.

LIME SCALE: Hard water scale containing a high percentage ofcalcium carbonate.

MMACRORETICULAR: A term used to describe resins that have arigid polymer porous network in which there exists a true porestructure even after drying. The pores are larger than atomicdistances and are not part of the gel structure.

MANGANESE GREENSAND: A manganese-coated greensand usedas a filter medium for removal of manganese and iron.

MEGOHM: One million ohms. Usually used as a measure of waterpurity, on resistivity in megohm-cm.

MEMBRANE: Media through which a liquid is passed. The term isusually used to define the functional filter material, and not itssupporting substrate, screens or other cartridge components.The word membrane is often used synonymously with filter orcartridge.

MESH: The number of openings in a lineal inch of wire cloth.

MHO: A measure of conductance, reciprocal of ohms.

250


BACK

MICROFILTRATION: Filtration designed to remove particles andbacterial in the approximate range of 0.05 to 10 micrometers.

MICROMHO (MICROSIEMENS): One millionth of a Mho. Unit ofmeasurement for conductivity (equivalent to the inverse of 1million ohms of resistivity). Water quality is measured by itsconductivity in micromhos per centimeter. The higher thequality the lower the micromho reading.

MICRON (MICROMETERS): A metric unit of measurementequivalent to 10-6 meters, 10-4 centimeters. System is η.

MICROPOROUS FILTRATION: Often used synonymously with theterms “absolute filtration” and occasionally “screen filtration”,microporous filters (or devices) have absolute ratings and will“absolutely” remove contaminants larger than their rated poresize, except for some types of bacteria that can “grow through”the filter.

MIXED BED ION EXCHANGE: A demineralization process where theanion and cation ion exchange resins are mixed in the samevessel.

NNANOFILTRATION (NF): A crossflow membrane separation processwhich removes particles in the 300 to 1000 molecular weightrange, selected salts and most organics.

NEGATIVE PRESSURE: A pressure below that of the surroundingatmospheric pressure at a specific point; a partial vacuum.

NEUTRALIZATION: The addition of either an acid or a base to asolution as required to produce a neutral solution. The use ofalkaline or basic materials to neutralize the acidity of somewaters is a common practice in water conditioning.

OOPERATING PRESSURE: The range of pressure, usually expressedin pounds per square inch, over which a water system isdesigned to function.

ORGANIC MATTER: Substances derived from plant or animalmatter, as opposed to inorganic matter derived from rocks andminerals. Organic matter is characterized by its carbon-hydrogenstructure.

OSMOSIS: The diffusion of a solvent through a semi-permeablemembrane from a less concentrated solution to a moreconcentrated solution.

OSMOTIC PRESSURE: The pressure required to preventspontaneous flow of water into a solution separated by a semi-permeable membrane.

OXIDATION: A chemical process in which electrons are removedfrom an atom, ion or compound. The addition of oxygen is aspecific form of oxidation. Combustion is an extremely rapid forof oxidation, while the rusting of iron is a slow form.

OXIDIZING FILTERS: Filters that remove both iron and manganesefrom the water. The units, also called iron removal filters, containa filter medium that has the ability of oxidizing and absorbingdissolved iron and manganese. The filter is regenerated withpotassium permanganate and cleaned with backwashing. Anoxidizing filter can also consist of a tank where iron is oxidizedwith air and the deposit is collected in a sand filter.

OZONE: An unstable form of oxygen (O3) that can be generatedby an electrical discharge through air or oxygen. A strongoxidizing agent, ozone can be used to disinfect water systems.

PpH: An expression of the acidity of a solution. The negativelogarithm of the hydrogen ion concentration. A pH of 1 is veryacidic; pH 7 is neutral; pH 14 is very basic.

PARTS PER MILLION: A measure of concentration. One part permillion of water is equivalent to 1 mg/liter of liquid. This is alsoequivalent to 0.0584 grains/U.S. gallon. 17.1 ppm is equal to 1grain per gallon.

PERACETIC ACID: A clear, colorless liquid with a pungent odor,composed of hydrogen peroxide and acetic acid. Can be usedto sanitize water systems and cartridges.

PERMEATE: The portion of the feed stream that passes throughthe membrane and emerges as purified water.

PERMEATOR: A name for an RO element or module. The unit thatcontains the semi-permeable membrane, and is constructed toallow the purified water to pass through the membrane, underpressure, while leaving behind the reject portion.

PLUGGAGE TEST: Used synonymously with the terms “foulingindex” and “silt density index”. A test used to determine theconcentration of colloids and particles in tap water fed to an ROor UF system. The test results can be used to determine theeffectiveness of pretreatment systems and/or the need forpretreatment. Silt density index is also the best method to predictfouling characteristics caused by undissolved contaminants.

POLISHING: Additional purification by RO, ion exchange, etc., toproduce exceptionally pure water.

POTABLE WATER: Water that is suitable for human consumption.

PRESSURE DIFFERENTIAL: The difference in pressure betweentwo points in a system caused by differences in elevationand/or pressure drop due to flow.

GLOSSARY


251




GLOSSARY

PRODUCT: The treated (filtered, deionized, etc.) water from awater purification system.

PYROGEN: A substance or agent that, when introduced into theblood stream of man or warm-blooded animals, produces fever.Endotoxins produced from gram negative bacteria fall under thisdefinition. Pyrogens can be removed by RO and UF membranes.

RRATED CAPACITY: The basis for calculating the period of time, ornumber of gallons delivered by a water softener, deionizer orfilter, between regenerations or servicing, as determined underspecific test conditions.

RAW WATER: Untreated water from wells or from surface sources.

RECOVERY: Expressed in percent, recovery is the portion of theRO feed water that is converted to product. Percent recovery iscalculated as follows: Product Flow X 100 = Percent Recovery

Feed Flow

REGENERATION: The chemical restoration of cation and anionresins by treatment with acid and caustic respectively.

REJECT: The portion of the feed stream that does not passthrough the membrane to become permeate (purified), but isretained by the membrane, and eventually passes to drain. Thiswater contains the bulk of the dissolved matter along withparticulates and microorganisms. Reject is used synonymouslywith the terms concentrate, brine, retentate and waste.

REJECT DELTA P: The pressure differential between themembrane feed pressure and reject pressure.

RESISTIVITY (OF WATER): The electrical measurement of thewater’s ability to resist the flow of electric current, and isdependent on the temperature and total concentration of theionized substances in solution. The lower the level of ionizedsubstances, the higher the resistivity. Resistivity is the inverse ofconductivity, and is measured in megohms per centimeter.

REVERSE OSMOSIS (RO): The process by which a solution underpressure (in excess of osmotic pressure) is forced through a semi-permeable membrane from a more concentrated to a lessconcentrated solution.

SSALT PASSAGE: Expressed in percent, salt passage is the ratio ofsalt concentration in the product water to salt concentration inthe RO feed water.

SALT REJECTION: Expressed in percent, salt rejection is the saltconcentration rejected by the RO membrane. Percent saltrejection is calculated as follows:

% Salt Rejection = Conductivity of Feed - Conductivity of Permeate X 100Conductivity of Feed

SAND FILTER: Packed bed of sand that can remove particles downto 25 microns. Can be regenerated by backwashing.

SANITIZE: A process performed to reduce the number of bacteria.

SCALE: The precipitate of sparingly soluble salts that forms onsurfaces in contact with water as a result of physical orchemical change.

SEMI-PERMEABLE MEMBRANE: Usually a thin, membrane that willallow the passage of some ions or materials while preventingthe passage of others.

SEPARATE BED ION EXCHANGE: A demineralization process wherethe anion and cation exchange resins are in separate vessels, asopposed to mixed bed ion exchange, where the anion andcation resins are in the same vessel.

SEPARATION: The dividing of two or more types of resin by specificgravity. Usually achieved by backwashing at a specified flow.

SILT DENSITY INDEX: A test used to determine the concentration ofcolloids and particles in water fed to an RO or UF system. The testresults can be used to determine the effectiveness of pretreatmentsystems and/or the need for pretreatment systems. Silt densityindex is also the best method to predict fouling characteristicscaused by undissolved contaminants (fouling index).

SINGLE PASS: Refers to a single-pass RO system in which aportion of the feed water to the system will pass one timethrough an RO membrane to be purified.

SOFTENER: Ion-exchange device that removes hardness fromwater by exchanging calcium and magnesium in the water forsodium ions. The softener is regenerated with sodium chloride,and the calcium and magnesium salts are rinsed to drain.

SOFT WATER: Any water that contains less than 1.0 gpg (17.1mg/L) of hardness minerals, expressed as calcium carbonate.

SPIRAL WOUND RO CARTRIDGE: A cartridge that is constructedwith a sheet of open-structured support material “sandwiched”between two sheets of RO membrane, wound spirally around aperforated, PVC core. As the untreated water (feed) flowsthrough the support material, purified water permeates thelayers of the membrane into the core, where is is extracted aspermeate. The bulk of dissolved ions and particles are rejected,and diverted to drain.

STERILIZE: To kill or destroy all microorganisms.

SURFACTANT (SURFACE-ACTIVE AGENT): The material in a soap ordetergent formulation that promotes the loosening of the soilfrom surfaces and the suspension of many soils. The actualcleaning agent in soaps and detergents.

SUSPENSION: Foreign particles carried in a liquid but notdissolved in it, like rusty iron in water.

252


BACK

SWELLING: The expansion of certain ion exchange resins whenconverted into specific ionic states.

TTANGENTIAL FLOW: Action whereby the untreated water (feed)flow is directed across the surface of the membrane. This“sweeping” action helps keep material retained by the membranefrom settling, and eventually restricting, permeate flow.

TEMPERATURE CORRECTION FACTOR: The factor by which thewater system productivity (RO or UF) would be reduced (orincreased) due to changes in water temperature. Water viscositychanges with changes in temperature, and therefore the rate atwhich it will pass through a membrane, will change accordingly.As a rule of thumb, the system productivity may be decreased byabout 2 percent per °C decrease in temperature.

THROUGHPUT: The total volume of fluid processed through thefilters before membrane fouling occurs. Throughput is measuredin liters of filtrate produced.

TOTAL CHLORINE: The total concentration of chlorine in a watersample, including combined and free chlorine.

TOTAL DISSOLVED SOLIDS (TDS): The total of all dissolved matter(both organic and inorganic) present in a water sample.

TOTAL HARDNESS: The sum of all hardness constituents in a watersample, expressed as their equivalent concentration of calciumcarbonate. Hardness is caused primarily by calcium andmagnesium, but may also include small amounts of metals suchas iron which act like calcium and magnesium in certain reactions.

TOTAL ORGANIC CARBON (TOC): One method for determining theorganic content of a water sample (from approximately 10 ppb tothousands of ppm). In this method the organic matter is oxidizedto carbon dioxide, which is then measured by one of severalsensitive electronic detectors. Other methods of determining theorganic content in a water sample include Chemical OxygenDemand (COD), Ultraviolet Spectrophotometry, GasChromatography and Mass Spectrometry.

TOTAL SOLIDS: The weight of all solids, dissolved andsuspended, organic and inorganic, per unit of water.

TRANSMEMBRANE PRESSURE: Short for transmembranedifferential pressure. The difference between the feed pressureapplied to the upstream as compared to that of the feedpressure on the downstream (permeate) side of the membrane.Transmembrane pressure is essentially the “net driving force”that determines “flux”. Transmembrane pressure is calculated asfollows:

Feed Pressure = 250 psi–Permeate Pressure = 50 psiTransmembrane Pressure= 200 psi

TURBIDITY: A term used to define the physical appearance orcloudiness of water. Expressed in NTUs, turbidity is determinedby how much undissolved material, such as clay, silt or sand ispresent in water.

TWO PASS: Refers to a two-pass RO system in which a portion ofthe feed water to the system will pass through two ROmembranes to be purified.

UULTRAFILTRATION: A filtration process using membrane filtermaterial to retain undissolved and dissolved contaminants thatare larger than the nominal molecular weight cutoff rating ofthe membrane (typically 5,000-500,000 daltons). Essentially amolecular sieve. Ultrafiltration systems use this process todramatically reduce contaminants not removed by microporousfiltration, such as large molecular weight organics, colloids,bacteria, and particles smaller than the absolute ratings of“microporous” or “absolute” filters. Ultrafiltration differs fromreverse osmosis as a process in that it typically will not removedissolved salts.

ULTRAVIOLET STERILIZATION: Using ultraviolet (UV) radiation tokill or inhibit bacteria and viruses.

UPFLOW: The operation of an ion exchange unit in whichsolutions are passed in at the bottom and out at the top of thevessel.

USP: United States Pharmacopoeia. Publishes standards forwater for injection (pharmaceutical) and purified water.

VVIRUS: An infective agent smaller than a common bacterium.Requires living cells for multiplication.

VISCOSITY: The resistance of fluids to flow, due to internal forcesand friction between molecules.

WWFI: Abbreviation for “water for injection”. Used in preparinginjectable pharmaceuticals, WFI must be pyrogen-free.

ZZEOLITE: A group of natural or synthetic hydrated aluminumsilicates with ion exchange properties.

GLOSSARY


253




TRADEMARK STATEMENT

APEX. AquaCarb, Arrowhead, AVGF, BevMAX, CDI, CDI-LX, CHEM-AD, Chemtube, Continental,Depolox, DI Gard, DI-SDI Alert, EPV, FlexTrex, FlexRO, High Resolution Redox, Ionpure, IWT,KISCO, LiquiPure, MED-RO, MEDICA, Membrane Care, Midas, MODULAB, Penfield, Permutit,PreFlex, Prepure DP, PreVUE, PolyBlend, Postpure PP, PureFit, ROGARD, Stranco, Strantrol, Total-Check, Vantage, VoCarb, Wallace & Tiernan, USF, Westates and WinCPD are trademarks ofSiemens, its subsidiaries or affiliates.

Santoprene is a trademark of Advanced Elastomer Systems, LPANSI is a trademark of the American National Standards InstituteASME is a trademark of the American Society of Mechanical EngineersASTM is a trademark of the American Society for Testing and MaterialsATCC is a trademark of the American Type Culture CollectionAWWA is a trademark of the American Water Works AssociationAquafine and Aqualogic 2000 are trademarks of Aquafine CorporationBarnstead, B-pure, E-pure, G-pure, Diamond, EASYpure NANOpure, NANOpure Infinity,

ORGANICfree, ROpure and ULTROpure are trademarks of Barnstead/Thermolyne CorporationCLSI is a trademark of the Clinical Laboratory and Standard InstituteDow, Dowex, Dowex Marathon and Monosphere are trademarks of Dow Chemical CompanyViton is a trademark of DuPont Performance Elastomers LLCTeflon is a trademark of E.I. du Pont de Nemours & CompanyCENTRA, MEDICA and PURELAB are trademarks of ELGA LabWaterFILMTEC is a trademark of FilmTec CorporationCoLD and Nexis are trademarks of Filterite CorporationE-Cell is a trademark of GE Water Technologies, Inc.Grundfos is a trademark of Grundfoss Bjerringbro Pumpefabrik A/S CorporationAnatel and Hach are trademarks of Hach CompanyHydranautics is a trademark of Hydranautics CorporationActiflo is a trademark of Kruger, Inc.Lewatit and MonoPlus are trademarks of Lanxess Deutschland GmbHLMI is a trademark of Liquid Metronics IncorporatedAFS, Alpha-Q, AFS, Milli-Q, Milli-RO, Millipore and Super-Q are trademarks of Millipore

CorporationDiaion is a trademark of Mitsubishi Chemical CorporationUltrameter is a trademark of Myron L. CompanyThio-Bag and Whirl-Pak are trademarks of NASCONEMA is a trademark of the National Electrical Manufacturers AssociationPropor is a trademark of Parker Domnick HunterClerify is a trademark of Pentair Filtration, Inc.Chem-Tech, Chem-Tech Prime Performance, IntelliScan, IntelliSense, MICROtrac, PULSAtrol and

PULSAtron are trademarks of Pulsafeeder Inc., a unit of IDEX CorporationPurolite is a trademark of The Purolite Company Allen-Bradley is a trademark of Rockwell Automation, Inc.Amberjet and Amberlite are trademarks of Rohm & HaasFluran is a trademark of Saint-Gobain Performance PlasticsIonac is a trademark of Sybron Chemicals, Inc.Terrapure is a trademark of Terracon CorporationTrisep is a trademark of TriSep CorporationcUL and UL are trademarks of Underwriters Laboratories, Inc.USP is a trademark of The United States Pharmacopeial ConventionVictaulic is a trademark of Victaulic Company


The information provided in this catalog contains merely general descriptions orcharacteristics of performance which in actual case of use do not always apply as

described or which may change as a result of further development of the products.An obligation to provide the respective characteristics shall only exist if expressly

agreed in the terms of the contract.

©2007 Siemens Water Technologies Corp.All Rights Reserved

CO-BLUE-CAT-0307Subject to change without prior notice.

For more information contact:

Siemens Water Technologies

10 Technology DriveLowell, MA 01851

North America and Canada800.875.7873 ext. 5000 Technical Support800.466.7873 Customer [email protected]

Information Desk800.525.0658 Toll Free+724.772.1402 [email protected]

www.siemens.com/water