we are stronger tiles adhesive product & tiling guide€¦ · tanking kit sealing &...

TILES ADHESIVEPRODUCT & TILING GUIDE

BUILDING PRODUCTSWe are stronger


2016

Arc manufacture and distribute an extensiverange of tiling related products from adhesives & grouts to trims & tools.

Arc has a proven track records in supplying this demanding industry with quality and innovative products.

LT-33 Lightweight Adhesive is recognised by tilers as the best tile adhesive available on the market. It offers exceptional strength, flexibility, workability and yields 60% more coverage than other adhesives. Engineered using recycled materials and special fillers, it is a unique and innovative product.

Our sand based range includes Rapid-Flex in Grey & White, Pro-Flex and T-20, both slow setting flexible white products.

We carry the most extensive range of tile trims in thecountry and can offer a profile for every solution.

This extensive range means Arc offers the largest selection of tiling related products in Ireland.

We are Stronger

TilingRange

Rapid-FlexPro-Flex

T-20Rapid-Set

LT-33Arc-Fix

GROUTSFlexi-GroutFloor GroutWall Grout

FLOOR LEVELLINGHigh Build

Standard Leveller

PRIMERS/SEALERS

TILE ADHESIVE

Substrate PrimersTile Sealers

Tile Cleaners

TILE TRIMSPVC Trims

Metal TrimsBath Seals

Expansion Joints

TANKINGMembranes

Pastes



CONTENTS

23

24

24

25

25

26

26

27

27

28

28

29

29

30

30

31

31

32

32

33

33

34

34

35

35

36

36

37

37

38

38

39

39

40

40

41

42

43

General Guidelines

Product Guide - Tile Adhesive

Rapid-Flex White

Rapid-Flex Grey

Pro-Flex

T-20

Rapid-Set

LT-33

Arc-Fix

Product Guide - Grouts

Flexi-Grout

Floor Grout

Wall Grout

Wall & Floor Grout

Product Guide - Preparation Products

High Build Floor Levelling Compound

Self-Level Floor Levelling Compound

Latex Admixture

Tilers Primer

Plastic Ply

Tanking Kit

Sealing & Decoupling Membrane

Sealing Accessories

Tile Backer Boards

Sloping Boards

Shower Bases

Shower Base Drain

Backer Board Washers

Underfloor Heating Mats - 100W/m²

Underfloor Heating Mats - 150W/m²

Digital Thermostat

Flexible Conduit

Multi-Pro Backer Board

Product Guide - Finishing Products

Expansion Joints

Straight Edge Aluminium Trim

Round Edge Aluminium Trim

Straight Edge PVC Trim

Round Edge PVC Trim

Square Aluminium Trim

Aluminium Listello

Bath Seal Plus

Bath Seal Tileover

Sanitary Silicone

Arc Grout & Sealer

Stone Sealer

Granite & Marble Impregnator

Colour Intensifier

Tile & Stone Cleaner - Acidic

Tile & Stone Cleaner - Alkaline

Grout Cleaner

Cement Residue Remover

Cement Residue Remover for Stone

Preparation - Walls

Gypsum Plaster

Gypsum Plasterboard

Sand / Cement Render

Concrete Blocks

Existing Tiles

Plywood / Calcium Silicate Boards

Backer Boards onto Solid Substrate

Backer Boards onto Rigid Framework

Preparation - Floors

Sand / Cement Screed

Concrete Base

Anhydrite Screed

Flooring Grade Asphalt & Bitumen

Existing Tiles

Existing Vinyl Tiles / Sheets

Tongue & Groove - Plywood Overlay

Tongue & Groove - Plastic Ply

Backer Boards onto Timber Floors

Backer Boards onto Concrete Floors

Electric Underfloor Heating

Heated Screeds

Decoupling Membrane

Preparation - Shower / Wet Room

Tile Backer Boards & Showerlays

Tanking System

Tanking Membrane

Technical Guide

European Standards

Priming Guide

Expansion Joint Guide

2016

1

3

3

4

4

5

5

6

7

7

8

8

9

9

10

10

11

11

12

12

14

15

15

16

16

17

17

18

18

18

19

20

20

21

21

22

22

23

SubstrateBefore starting any tiling project ensure that the substrate to be tiled is Clean & dry Free from any contaminants Sufficiently flat Free from all paints, sealers and other coatings Strong and rigid enough to support the tiles, adhesive and groutFor guidelines on substrate preparation, see pages 29 - 39.

The preparation, type of adhesive & grout and whether expansions joints or tile sealer will be required, depends on the type of tile, type of substrate and site conditions.

Tile TypesCeramic and other tile types vary according to material, production method, water absorption, size, thickness and weight. These affect the choice of adhesive and installation procedure.For guidelines on the suitability of each adhesive by tile, see pages 3 - 6.

Substrate PrimingBefore tiling, most wall and floor substrates require priming. The reasons for priming are: To improve the adhesion of cement based products Reduce the porosity of porous substrates A slurry coat mix improves the adhesion to non porous surfaces Produce a barrier between calcium sulphate based surfaces and cement based adhesives to minimise the risk of chemical reaction

See page 42 for a detailed substrate priming guide.

If using an electric drill mixer, blend at a slow speed. Do not exceed 300rpm. Mixed adhesive and grout can be remixed after a short period to freshen up but extra water should never be added after the initial mix as this will reduce final strength.

ApplicationAll packs carry specific instructions but in general the following apply.

Do not apply adhesives & grouts in temperatures below 5ºC

Apply a maximum of 1m² of adhesive at a time

Ensure ribs all run in the same directionFix tiles before the adhesive forms a skin, typically 20 minutes

If a skin forms, remove the adhesive and apply a fresh layer

When grouting, completely fill the tile joints, compact well and ensure there are no voids

Ensure tiles are fixed into a solid bed of adhesive. Do not dot and dab adhesive.

European StandardsAll Arc products are manufactured in accordance with European Standards and meet or exceed the classifications which define the type and properties of each product. See page 41 for an explanation and description of each category and classification.

NOTE: All information given is for general guidance only. Arc cannot accept liability for loss or damage caused by the incorrect use of its products or poor workmanship. The user must ensure the product’s suitability for the application intended and if in doubt should seek a written technical specification for the product’s application.

Sealing TilesTiles and grout are by their nature porous. To prevent the ingress of water and subsequent damage to the substrate and adhesive bond, tile facings and grout should be sealed with an appropriate sealer.

Likewise, to protect against staining from spills and dirt, facings and grout should be appropriately sealed. See pages 24 - 26 for the correct choice of sealer.

Movement JointsMovement joints must be installed in certain areas and positions to prevent tiles debonding from the substrate.

Industry standards suggest that the maximum field should be no more than 10m in each direction but in practice, depending on the individual application, it tends to be between 5 to 8m.

See page 43 for guidelines on the use of movement joints.

Mixing GuidelinesAll Arc adhesives and grouts come with specific instructions on the bag. In general, powder adhesives and grouts should be mixed with clean, cold water until a smooth paste is achieved.



General Guidelines

- 1 -

ADHESIVE

GROUTS

PREPARATION

FINISHING



P

R

O

D

U

C

T

G

U

I

D

E

Ä

Ä

Ä

Ä

PRODUCT GUIDE - TILE ADHESIVE

Rapid-Flex WhiteA rapid-setting white flexible tile adhesive for fixing most tile types to most substrates.


Product Code: 20kg - / 10kg -FAFR003 FAFR004

Depth: 3-6mm

Colour: White

Set Time: 2-3 hours

Open Time: 30-40 min

Coverage: 4-5m² per 20kg bag


Rapid-Flex GreyA rapid-setting grey flexible tile adhesive for fixing most tile types to most substrates.

Product Code: 20kg - / 10kg -TAFR001 TAFR002

Depth: 3-6mm

Colour: Grey

Set Time: 2-3 hours



Plywood

Concrete

Plaster

Screeds

Backer boards

Anhydrite screed

Underfloor heating

Bitumen flooring

Plasterboard

Existing tiles

Render

Brick & block

Heated screed

Vinyl tiles

Fibre cement

Asphalt flooring

Porcelain

Ceramics

Terracotta

Quarry

Quartz

Glass

Marble

Mosaics

Limestone

Travertine

Natural Stone

Slate

FOR APPLICATION TO: FOR FIXING:

Plywood

Concrete

Plaster

Screeds

Backer boards

Anhydrite screed

Underfloor heating

Bitumen flooring

Plasterboard

Existing tiles

Render

Brick & block

Heated screed

Vinyl tiles

Fibre cement

Asphalt flooring

Porcelain

Ceramics

Terracotta

Quarry

Quartz

Glass

Marble

Mosaics

Limestone

Travertine

Natural Stone

Slate



- 3 -


Pro-Flex A regular setting white flexible tile adhesive for fixing most tile types to most substrates.


Product Code: 20kg - TAWC002

Depth: 3-6mm

Colour: White

Set Time: 24 hours




T-20 A regular setting white part flexible tile adhesive for fixing most tile types to most substrates.

Plywood walls

Concrete

Plaster

Screeds

Backer boards

Anhydrite screed

Underfloor heating

Bitumen flooring

Plasterboard

Existing tiles

Render

Brick & block

Heated screed

Vinyl tiles

Fibre cement

Asphalt flooring

Porcelain

Ceramics

Terracotta

Quarry

Quartz

Glass

Marble

Mosaics

Limestone

Travertine

Natural Stone

Slate


Plywood

Concrete

Plaster

Screeds

Backer boards

Anhydrite screed

Underfloor heating

Bitumen flooring

Plasterboard

Existing tiles

Render

Brick & block

Heated screed

Vinyl tiles

Fibre cement

Asphalt flooring

Porcelain

Ceramics

Terracotta

Quarry

Quartz

Glass

Marble

Mosaics

Limestone

Travertine

Natural Stone

Slate



Product Code: 20kg - TAT2001

Depth: 3-6mm

Colour: White

Set Time: 24 hours



- 4 -



Rapid-Set LT-33Rapid-setting white flexible tile adhesive for fixing most tile types to most substrates with exceptional coverage, adhesion and workability.


Rapid-SetA rapid-setting grey tile adhesive for fixing ceramic floor tiles to solid substrates such as concrete floors.

Concrete

Gypsum plaster

Screeds

Render

Brick & block

Backer boards

Ceramics

Terracotta

Mosaics

Quarry



Product Code: 20kg - / 10kg - TAFS001 TAFS002

Depth: 3-6mm

Colour: Grey

Set Time: 2-3 hours



Plywood

Concrete

Plaster

Screeds

Backer boards

Anhydrite screed

Underfloor heating

Bitumen flooring

Plasterboard

Existing tiles

Render

Brick & block

Heated screed

Vinyl tiles

Fibre cement

Asphalt flooring

Porcelain

Ceramics

Terracotta

Quarry

Quartz

Glass

Marble

Mosaics

Limestone

Travertine

Natural Stone

Slate


Product Code: 15kg - TALW002

Depth: 3-6mm

Colour: White

Set Time: 2-3 hours



- 5 -


Arc-FixA ready mixed, non-slip, acrylic based tile adhesive for interior fixing of ceramic tiles to walls.

Concrete

Plaster

Backer boards

Plasterboard

Existing tiles

Brick & block

Ceramics Mosaics



Product Code: 16kg - TANS001 5lt - TANS002

TANS003 2.5lt -

Depth: 2-3mm

Colour: White

Set Time: 24 hours

Open Time: 20 min

Coverage: 2-3kg per m²


Regular-Set LT-33A Regular setting white flexible tile adhesive for fixing most tile types to most substrates with exceptional coverage, adhesion and workability.


Plywood

Concrete

Plaster

Screeds

Backer boards

Anhydrite screed

Underfloor heating

Bitumen flooring

Plasterboard

Existing tiles

Render

Brick & block

Heated screed

Vinyl tiles

Fibre cement

Asphalt flooring

Porcelain

Ceramics

Terracotta

Quarry

Quartz

Glass

Marble

Mosaics

Limestone

Travertine

Natural Stone

Slate


Product Code: 15kg - TALW001

Depth: 3-15mm

Colour: White

Set Time: 24 hours



- 6 -

PRODUCT GUIDE - GROUTS

Floor GroutA water and stain resistant wide joint grout for use with all tile types on solid substrates.


Product Code: 10kg - TAGG001 5kg - TAGG002

Colour: Grey

Set Time: 24 hours


Joint Width: up to 12mm


Flexi-GroutA mould, stain and water resistant, flexible, wide joint grout for use with all tile types and substrates.


24 x 24 x 10 mosaic

150 x 150 x 8 tile

300 x 300 x 10 tile

600 x 600 x 10 tile

2.4m²

20m²

32m²

60m²

24 x 24 x 10 mosaic

150 x 150 x 8 tile

300 x 300 x 10 tile

600 x 600 x 10 tile

1.6m²

12m²

20m²

40m²

COVERAGE PER 10kg – 3mm JOINT COVERAGE PER 10kg – 5mm JOINT

Product Code: 10kg - MRGG002

Colour: Grey

Set Time: 24 hours


Joint Width: up to 20mm

24 x 24 x 10 mosaic

150 x 150 x 8 tile

300 x 300 x 10 tile

600 x 600 x 10 tile

2.4m²

20m²

32m²

60m²

24 x 24 x 10 mosaic

150 x 150 x 8 tile

300 x 300 x 10 tile

600 x 600 x 10 tile

1.6m²

12m²

20m²

40m²


- 7 -


Wall GroutA mould, stain and water resistant wall grout for use with most tile types on solid substrates in internal and external locations.

Product Code:

Colour: White & Ivory

Set Time: 24 hours


Joint Width: 2 - 3mm

24 x 24 x 10 mosaic

150 x 150 x 8 tile

300 x 300 x 10 tile

600 x 600 x 10 tile

2.4m²

20m²

32m²

60m²

n/a



Pro-Line GroutA highly versatile cement based wall & floor grout containing anti mould technology. Flexible, stain& water resistant. Contains 30% recycled materials.


Set Time: 3 - 4 hours

Open Time: 20 min

Joint Width: 2 - 15mm

24 x 24 x 10 mosaic

150 x 150 x 8 tile

300 x 300 x 10 tile

600 x 600 x 10 tile

1.2m²

10m²

16m²

30m²

24 x 24 x 10 mosaic

150 x 150 x 8 tile

300 x 300 x 10 tile

600 x 600 x 10 tile

0.3m²

2.5m²

4m²

7.5m²



- 8 -

10kg - / 10kg - TAGW001 TAGI001 5kg - / 5kg - TAGW002 TAGI002

White Ivory

SIZE COLOUR PRODUCT CODE5kg

2.5kg5kg

2.5kg5kg

2.5kg5kg5kg5kg5kg5kg5kg

Mid GreyMid Grey

IvoryIvoryWhiteWhiteBeigeBrown

CharcoalLight GreyLimestoneSandstone

PROG001PROG002PROG003PROG004PROG005PROG006PROG007PROG008PROG009PROG010PROG011PROG012

PRODUCT GUIDE - PREPARATION PRODUCTS

Self-Level Floor Levelling CompoundA high quality self-levelling compound for use on existing solid substrates and floors.


Product Code: 20kg - PFLC001 10kg - PFLC002

Application Depth: 1-3mm

Colour: Grey

Set Time: 3 hours

Open Time: 20 min

Coverage: 10m² per 20kg bag at 1½mm


High Build Floor Levelling CompoundA high build, flexible, fibre reinforced, rapid-setting floor levelling compound suitable for 2 to 50mm single application.


Plywood

Concrete

Plaster

Underfloor heating

Plasterboard

Existing tiles

Render

Brick & block

Backer boards

Anhydrite screed

Screeds

T & G floors

Heated screed

Vinyl tiles

Fibre cement

Asphalt flooring

FOR APPLICATION TO:

Product Code: 20kg - PFLC003

Application Depth: 2-50mm

Set Time: 2-3 hours


Coverage: 4.2m² per 20kg bag at 3mm

Concrete Screeds Floated concrete Backer boards

- 9 -

FOR APPLICATION TO:



Latex Admixture Gives flexibility, increased application depth and greater adhesion to Self-Level Floor Levelling Compound.

Plywood

Concrete

Plaster

Underfloor heating

Plasterboard

Existing tiles

Render

Brick & block

Backer boards

Anhydrite screed

Screeds

T & G floors

Heated screed

Vinyl tiles

Fibre cement

Asphalt flooring

FOR APPLICATION TO:


Product Code: 5lt - LFLC001

Mix Colour: Grey

Application Depth of Mix: 1-6mm

Set Time of Mix: 3 hours

Open Time of Mix: 20-30 min

Mix Ratio: 4-4½lt latex to 20kg self-level

Arc Tilers PrimerA styrene butadiene co-polymer designed to prime, seal and stabilise substrates prior to tiling.

Plywood

Concrete

Plaster

Underfloor heating

Plasterboard

Existing tiles

Render

Brick & block

Backer boards

Anhydrite screed

Screeds

T & G floors

Heated screed

Vinyl tiles

Fibre cement

Asphalt flooring

FOR APPLICATION TO:


Product Code: 1lt - STP006 2.5lt - STP007 STP005 5lt -

Colour: Blue

Drying: 30-60 min absorbent surfaces 60-90 min non absorbent

Mix Ratio: Dependent on application

Coverage: 10m² per 1lt neat

- 10 -



Plastic PlyReinforcement sheet for timber floors. Self-adhesive and ultra thin at 2mm.

Timber floors Plywood T & G floors Chipboard

FOR APPLICATION TO:


Product Code: GXRS001

Colour: Blue

Application: Self-adhesive

Depth: 2mm

Coverage: Pack contains 1.2m²

Tanking KitA waterproof barrier system designed to protect water sensitive structures and surfaces in tiled areas where regular and frequent exposure to damp conditions is expected.

Plywood

Concrete

Plaster

Plasterboard

Existing tiles

Render

Screeds

Backer boards

Anhydrite screed

Brick & block

Vinyl tiles

Fibre cement

FOR APPLICATION TO:

Product Code: TAKT001

Contents: - 1lt primer, - 2½lt tanking paste, - 10m x 100mm jointing tape, - 1m² polyester matting.

Set Time: 24 hours

Coverage: Standard 2m shower


- 11 -



Sealing & Decoupling MembraneA flexible, wall & floor, waterproofing, crack covering and decoupling membrane. 100% waterproof and has a crack covering effect and thereby provides a high level of safety against cracks that may later appear in screeds and floor structures.

Showers

Bathrooms

Wetrooms

Balconies

Pool Areas

Patios

Solid Substrates

Subject to Cracking

FOR APPLICATION TO:

Product Code: PROL001

Thickness: approx. 0.4mm

Size: 1m x 30m

Material: Polyethylene film laminatedboth sides with PP fleece layers

Sealing TapeSealing tape for use with the Sealing & Decoupling Membrane or for waterproofing joints between substrates and/or boards e.g. Tile Backer Boards.

Showers

Bathrooms

Wetrooms

Balconies

Pool Areas

Patios

Laundries

Hospitals

FOR APPLICATION TO:



Size: 120mm x 10m

Material: Tri-laminate with fleece backing both sides



- 12 -



Self Adhesive Sealing TapeSelf-adhesive, extreme bonding strength, sealing tape for use with the Sealing & Decoupling Membrane or for waterproofing joints between substrates and/or boards e.g. Tile Backer Boards.



Size: 100mm x 10m

Material: Self-adhesive butyl rubber with tear resistant fleece backing

Internal CornerInternal corner piece for use with the Sealing & Decoupling Membrane.



Leg Size: 120mm


Showers

Bathrooms

Wetrooms

Balconies

Pool Areas

Patios

Laundries

Hospitals

FOR APPLICATION TO:

Showers

Bathrooms

Wetrooms

Balconies

Pool Areas

Patios

Laundries

Hospitals

FOR APPLICATION TO:

External CornerExternal corner piece for use with the Sealing & Decoupling Membrane.



Leg Size: 110mm



- 13 -



Wall & Floor CollarFor use with the Sealing & Decoupling Membrane.

Showers

Bathrooms

Wetrooms

Balconies

Pool Areas

Patios

Laundries

Hospitals

FOR APPLICATION TO:

Product Code: 120mm x 120mm - PROL006 425mm x 425mm - PROL007


Wall Size: 120mm x 120mmFloor Size: 425mm x 425mm


Tile Backer BoardWaterproof, sturdy, thermally insulating, low weight, compression proof and easy to work with.

Walls

Floors

Solid

Substrates

Rigid Framework Plasterboard

FOR APPLICATION TO:


Product Code: 4mm x 1250 x 600 - MTBB001 MTBB0026mm x 1250 x 600 - MTBB00310mm x 1250 x 600 - MTBB00412.5mm x 1250 x 600 - MTBB00520mm x 1250 x 600 - MTBB00650mm x 1250 x 600 -

Thickness: Various

Size: 1250mm x 600m

Material: XPS inner core


- 14 -



Sloping BoardMade of same material as standard boards. Slopes from 33mm to 10mm. Ideal for wetrooms with drainage along the edge of wall.

Also for external balconies.

Showers

Bathrooms

Wetrooms

Balconies

Pool Areas

Patios

Laundries

Hospitals

FOR APPLICATION TO:

Product Code: MTBB007

Thickness: 33mm - 10mm

Size: 1200mm x 1200mm

Material: XPS inner core

Shower BasesAn extruded polystyrene foam core sandwiched between mortar / fibreglass outer layers. Waterproof, sturdy, thermally insulating, low weight, compression proof and easy to work with.

Use on concrete or wooden floors to create a fully waterproof shower area.

Timber Floors Concrete Floors

FOR APPLICATION TO:



- 15 -

SIZE DRAIN PRODUCT CODE800 x 800 x 20mm900 x 900 x 20mm1000 x 1000 x 20mm1000 x 1000 x 20mm1200 x 900 x 20mm1200 x 900 x 20mm1200 x 1200 x 20mm1200 x 1200 x 20mm1300 x 800 x 20mm1500 x 800 x 24mm1500 x 1500 x 24mm1850 x 900 x 24mm

CentreCentreCentreOff-setCentreOff-setCentreOff-setOff-setOff-setCentreOff-set

MTSL001MTSL002MTSL003MTSL004MTSL005MTSL006MTSL007MTSL008MTSL009

MTSL0010MTSL0011MTSL0012


Shower Base DrainHorizontal drain for use with Shower Bases.

Shower Bases

FOR APPLICATION TO:

Product Code: MTDR001

Flow Rate: 30lt/min.



Tile Backer Board WashersFor installation of backer boards

Tile Backer Boards

FOR APPLICATION TO:

Product Code: BKWS001

Size: 35mm diameter.



Tile Backer Board ScrewsFor use with washers for installation of backer boards.


Packed: 200 per bag.

Packed: 1’s.

- 16 -

SIZE COLOUR QTY. PER BOX3.5mm x 32mm Black phosphate 1000

PRODUCT CODEMPBO001

Size: 3.5mm x 32mm

Packed: 1000 per box.

Tile Backer Boards

FOR APPLICATION TO:


Underfloor Heating Mats – 100W/m²Designed with an adhesive backed mesh which allows quick and easy application. Ultra efficient and maintenance free. 100W/m² recommended for wooden substrates.

Wooden Substrates

FOR APPLICATION TO:


SIZE DESCRIPTION PRODUCT CODE2m x 0.5m3m x 0.5m4m x 0.5m5m x 0.5m6m x 0.5m7m x 0.5m8m x 0.5m9m x 0.5m

10m x 0.5m12m x 0.5m14m x 0.5m16m x 0.5m18m x 0.5m20m x 0.5m22m x 0.5m24m x 0.5m

1m² 100W1.5m² 150W2m² 200W

2.5m² 250W3m² 300W

3.5m² 350W4m² 400W

4.5m² 450W5m² 500W6m² 600W7m² 700W8m² 800W9m² 900W

10m² 1000W11m² 1100W12m² 1200W

UNHM029UNHM001UNHM002UNHM003UNHM004UNHM005UNHM006UNHM007UNHM008UNHM009UNHM010UNHM011UNHM012UNHM030UNHM031UNHM032


Underfloor Heating Mats – 150W/m²Designed with an adhesive backed mesh which allows quick and easy application. Ultra efficient and maintenance free. 150W/m² recommended for concrete substrates.

Concrete Substrates Tile Backer Boards Screeds

FOR APPLICATION TO:


SIZE DESCRIPTION PRODUCT CODE2m x 0.5m3m x 0.5m4m x 0.5m5m x 0.5m6m x 0.5m7m x 0.5m8m x 0.5m9m x 0.5m

10m x 0.5m12m x 0.5m14m x 0.5m16m x 0.5m18m x 0.5m20m x 0.5m22m x 0.5m24m x 0.5m

1m² 150W1.5m² 225W2m² 300W

2.5m² 375W3m² 450W

3.5m² 525W4m² 600W

4.5m² 675W5m² 750W6m² 900W

7m² 1050W8m² 1200W9m² 1350W

10m² 1500W11m² 1650W12m² 1800W

UNHM013UNHM014UNHM015UNHM016UNHM017UNHM018UNHM019UNHM020UNHM021UNHM022UNHM023UNHM024UNHM025UNHM026UNHM027UNHM028

- 17 -


Digital Thermostat16A digital thermostat and timer for use with underfloor heating mats.

Product Code: UNHT001

Colour: White


Flexible ConduitFor protection of underfloor heating probe.

Product Code: UNHC001

Colour: Black

Size: 1m x 13mm


Multi-Pro Backer BoardMagnesium silicate board. Impact resistant, moisture & water resistant, A1 fire rated for wall & floor tiling.

Showers

Bathrooms

BalconiesPool Areas

Patios

Laundries

Hospitals

FOR APPLICATION TO:

SIZE COLOUR PRODUCT CODE1195 x 590 x 6mm1200 x 800 x 12mm

WhiteWhite

MPBO001MPBO002




Heating Mats

FOR APPLICATION WITH:

Heating Mats

FOR APPLICATION WITH:

- 18 -

Tile on Rough Side of Boards

SIZE COLOUR PACKED10mm10mm12mm12mm

BlackDark Grey

Black Dark Grey

10’s10’s10’s10’s

PRODUCT CODEAMJG002AMJG001AMJG005AMJG003

PRODUCT GUIDE - FINISHING PRODUCTS


Aluminium Expansion Joints Designed for use in medium to heavy duty traffic areas. The co-extruded flexible infill is manufactured in santoprene providing greater flexibility, chemical and weathering resistance.

Black Grey 10mm 12mm

INFILL COLOUR:

Edge Colour: Chrome

Infill Width: 9.8mm

Length: 2.5m

Profile: Aluminium

PROFILE DEPTH:

PVC Perimeter / Expansion Joints PVC profile with detachable anchor so it can be used as either a perimeter or movement joint.

Black Grey 10mm 12mm

INFILL COLOUR:


Edge Colour: Black / Grey / Beige

Infill Width: 9mm

Length: 2.5m

Profile: PVC

PROFILE DEPTH:

Beige


- 19 -

SIZE COLOUR PACKED10mm10mm10mm12mm12mm

BlackDark Grey

BeigeBlack

Dark Grey

25’s25’s25’s25’s25’s

PRODUCT CODEPMJG002PMJG003PJMG004PMJG004TTVJ001



Straight Edge Aluminium TrimAn L shaped extruded aluminium profile designed to protect the edges of tiles or similar hard finishes fitted in wall or floor installations.

Chrome

Brushed

Matt Silver 8mm

10mm

12mm

22.5mm

COLOUR FINISHES:

Profile Thickness: 3mm

Length: 2.5m

Profile: Aluminium

PROFILE DEPTH:

Round Edge Aluminium TrimAn extruded semi-round edge aluminium profile designed to protect the edges of ceramic tiles or similar hard finishes fitted in wall or floor installations.

Chrome Gold 8mm

10mm

12mm

COLOUR FINISHES:


Profile Thickness: 1.2mm

Length: 2.5m

Profile: Aluminium

PROFILE DEPTH:


- 20 -

SIZE COLOUR PACKED8mm

10mm12mm

22.5mm8mm

ChromeChromeChromeChrome

Matt Silver

20’s20’s20’s20’s20’s

PRODUCT CODEARTT004ARTT005ARTT006TTBS004ARTT010

10mm12mm8mm

10mm12mm

Matt SilverMatt SilverBrushedBrushedBrushed

20’s20’s20’s20’s20’s

TTSE005TTSE006TTBA004TTBA005TTBA003

SIZE COLOUR PACKED8mm

10mm12mm8mm

10mm12mm

ChromeChromeChrome

GoldGoldGold

20’s20’s20’s20’s20’s

PRODUCT CODEARTT001ARTT002ARTT003TTGT002TTGT003TTGT00420’s

Straight Edge PVC Trim A straight edge alternative to round edge PVC profiles. Can also be used as a capping on the horizontal where skirting tiles have been fitted or where walls are not fully tiled.

White Soft Cream 10mm 12mm

COLOUR FINISH:


Length: 2.5m

Profile: PVC

PROFILE DEPTH:

Round Edge PVC Trim


It features overhang lips to better butt against the cushion edge of the ceramic tile, a second upright to support the face making it the most suitable trim for floor tile use.

White

Soft Cream

Black

Beige

6mm

8mm

10mm

12mm

COLOUR FINISH:


Length: 2.5mProfile: PVC

PROFILE DEPTH:


- 21 -


WhiteSoft Cream

WhiteSoft Cream

100’s100’s100’s100’s

PRODUCT CODETTSE001TTSE002TTSE003TTSE004

SIZE COLOUR PACKED6mm8mm

10mm12mm6mm8mm

10mm12mm6mm8mm

10mm12mm8mm

10mm12mm10mm12mm

WhiteWhiteWhiteWhiteIvoryIvoryIvoryIvory

Soft CreamSoft CreamSoft CreamSoft Cream

BlackBlackBlackBeigeBeige

100’s100’s100’s100’s100’s100’s100’s100’s100’s100’s100’s100’s100’s60’s60’s60’s60’s

PRODUCT CODETTDT001TTDT002TTDT003ARTT007TTDT004TTDT005TTDT006ARTT009TTDT007TTDT008TTDT009ARTT008TTPT008TTPT013TTPT015TTBE001TTVE002

Ivory



Aluminium Listello A flat aluminium feature strip that can be used between tiles or as a finishing edge.

Chrome 10mm 25mm

COLOUR FINISHES:

Product Code: 10mm X 7mm - TTBS001 TTBA00125mm x 7mm -


Length: 2.5m

Profile: PVC

PROFILE WIDTH:

Depth: 7mm to fit all tiles


Square Aluminium TrimCan be used as an edge trim on the vertical with wall tiles, on the horizontal with floor tiles or as a feature strip in wall or floor tiling applications.

Chrome Brushed 10mm 12mm

COLOUR FINISHES:


Length: 2.5m

Profile: Aluminium

PROFILE DEPTH:



ChromeBrushedChromeBrushed

10’s10’s10’s10’s

PRODUCT CODEALSQ002ALSQ001ALSQ003ALSQ004



- 22 -

White 20mm wide 19mm high

COLOUR FINISHES: PROFILE DEPTH:

Bath Seal TileoverCo extruded bath seal designed to bridge gaps. The thin back of the profile will not kick out the tile laid over the section.

White 23mm

COLOUR FINISHES:

Product Code: ATSE001


Length: 1.8m

Profile: PVC

PROFILE WIDTH:


Bath Seal Plus A co-extruded bath seal designed to be fixed into silicone. The profile can be either retro fitted or tiled over.

Product Code: ATSE002


Length: 1.8m

Profile: PVC

Packed: 50’s




- 23 -

Sanitary SiliconeSuperior grade silicone sealant with anti-fungal compounds to prevent mould growth in high humidity areas.


Product Code: 310ml Clear - SSC0001SSW0001 310ml White -

SSI0001 310ml Ivory -

Set Time: 24 hours

Colours: Clear, White & Ivory

Glass

Ceramics

Sanitary Ware

Paint

Most Non-Porous Surfaces

FOR APPLICATION TO:

Arc Grout & Tile SealerCan be applied to damp grout & tiles. Penetrating protection.Does not alter the natural look. Interior & Exterior. 20 year protection

Marble

Natural Stone

Porcelain

SUITABLE FOR:


Drying Time: 1 hour

Type: Penetrating Sealer & Protector

Coverage: 25m² (Depending on surface)

Finish: Clear Finish

Travertine

Terracotta

Granite

Slate

Limestone

Grout

Sandstone

Damp surfaces

Internal/external

Product Code: 600ml - UNR3I1

- 24 -





Stone SealerForms a waterproof and stain resistant protective layer.Colour enhancing with a soft satin shine.For Interior & Exterior use.

Granite & Marble ImpregnatorForms a waterproof and stain resistant protective layer.Suitable for all absorbent natural and artificial stonesand tiles. For Interior & Exterior use.

Slate

Polished Marble

Smooth Marble

Sandblasted Marble

SUITABLE FOR:


Drying Time: 3-4 Hours

Type: Penetrating Sealer & Protector

Coverage: 10-25m² (1lt approx)

Finish: Clear & Invisible Finish

Product Code: 1lt - WETC002

Sandstone

Terrazzo

Concrete

Polished Porcelain

Smooth Porcelain

Sandblasted

Porcelain

Kitchen Counters

Granite

Grout

Slate

Absorbent

Stone

SUITABLE FOR:

Drying Time: 2 Hours

Type: Surface Sealer & Protector

Coverage: 15-20m²

Finish: Soft Satin Shine


Marble

Sandstone

Terrazzo Concrete

SurfacesBUILDING PRODUCTS

We are stronger

- 25 -



Colour IntensifierForms a waterproof and stain resistant protective layer.Deepens and intensifies colour leaving an almost wet look. For Interior & Exterior use. Revives the natural texture. Suitable for all absorbent natural and artificial stones & tiles.

Tile & Stone Cleaner - AcidicFor acid resistant surfaces. Powerful, concentrated

cleaner for removal of stubborn dirt, calcium, urine

and water scale, limescale, light cement films,

rust etc.

Acid Resistant Tiles

Natural Stone

SUITABLE FOR:


Type: Cleaner

Dilute: Up to 1:10


Stoneware

Patios

Sanitary Ware

Chrome

Slate

SUITABLE FOR:

Drying Time: 1 Hour

Type: Surface Sealer & Protector

Coverage: 15-20m² (1lt approx)

Finish: Deepens & Intensifies Colour


Marble Sandstone Terrazzo Concrete

Surfaces BUILDING PRODUCTSWe are stronger

- 26 -



Tile & Stone Cleaner - AlkalineFor alkaline resistant surfaces. Powerful, concentrated

cleaners for removal of stubborn dirt, old floor care residues,

polish films, wax, nicotine, fat encrustation, yellowing etc.

For alkaline resistant surfaces in interior and exterior areas.

Grout CleanerRemoves grease, dirt, residues of care products

and stubborn deposits. For the grouting of wall

and floor tiles indoors and outdoors. For ceramic

and natural stone tile grouting.

Natural Stone

SUITABLE FOR:


Type: Cleaner

Product Code: 750ml - WECL008

Stoneware

Patios

Sanitary Ware

Chrome

Porcelain

SUITABLE FOR:

Type: Cleaner

Dilute: Up to 1:10


Marble Granite Plastic PVC BUILDING PRODUCTSWe are stronger

- 27 -

Rubber Coverings



Cement Residue RemoverHighly effective concentrate. Quickly and easily removes

cement residue, mortar residue, lime deposits, efflorescence

and inorganic contamination.

For all acid-resitant surfaces.

Cement Residue For Marble & Natural StoneConcentrated. Gently and effectively removes cement residue, cement remains, grout residues, lime deposits and soiling from surfaces sensitive to acids. For mild cleaning of sensitive coatings. Interior & Exterior.

Natural Stone

SUITABLE FOR:


Type: Cleaner

Dilute: Up to 1:10


Stoneware Sanitary Ware

Acid Resistant Surfaces

SUITABLE FOR:

Type: Cleaner

Dilute: Up to 1:10



- 28 -

P

R

E

P

A

R

A

T

I

O

N

G

U

I

D

E

WALLS

FLOORS

SHOWERS

WET ROOM



Ä

Ä

Ä

Ä

PREPARATION - WALLS

Gypsum Plaster

A Plaster primed with Arc Tilers Primer

B Pro-Flex, T-20 or LT-33 Adhesive

C Arc Wall & Floor Grout

INSTALLATION GUIDELINES:

Allow 4 weeks minimum for new plaster to dry.

Ensure surface is free of any contaminants, loose dust or dirt.

Polished/shiny plaster must be brushed with a stiff brush.

Prime the plaster with Arc Tilers Primer diluted 3 parts water to 1 part primer followed by a second neat coat & allow to dry.

Maximum weight when tiling to plaster is 20kg per m² including tiles, adhesive and grout.

Any paint must be removed prior to tiling.

A

B

C

PREPARATION - WALLS

Gypsum Plasterboard

A Rigid framework

B Plasterboard primed with Arc Tilers Primer

C Pro-Flex, T-20 or LT-33 Adhesive

D Arc Wall & Floor Grout


Ensure the boards are fixed securely to the framework, ideally screwed at 300mm centres.


Prime the plaster with Arc Tilers Primer diluted 3 parts water to 1 part primer followed by a second neat coat & allow to dry.

If the plasterboard is fixed to a timber frame, a flexible adhesive and grout must be used.Maximum weight when tiling to plasterboard is 32kg per m² including tiles, adhesive and grout.

Any paint must be removed prior to tiling.

A

B

C

D



- 29 -

PREPARATION - WALLS

Sand / Cement Render

A Sand/Cement render primed with Arc Tilers Primer




Allow 2 weeks minimum for new render to dry.


Prime the render with Arc Tilers Primer diluted 3 parts water to 1 part primer & allow to dry.

If tiling externally, protect the tiled area from water ingressfor 24-48 hours.

PREPARATION - WALLS

Concrete Blocks


A Block work primed with Arc Tilers Primer




New block work must be left for a minimum of 6 weeks before rendering or plastering.


Prime the surface with Arc Tilers Primer diluted 3 parts water to 1 part primer & allow to dry.

If tiling directly to block work, ensure the wall is smooth faced.

If tiling externally, a flexible adhesive and grout must be used.

If tiling externally, protect the tiled area from water ingress for 24-48 hours.

A

B

C

A

B

C


- 30 -

PREPARATION - WALLS

Existing Glazed Tiles / Bricks

A Existing tiles

B Tilers primer slurry coat




Ensure existing tiles are firm, stable and securely fixed.


Prime the surface with Arc Tilers Primer diluted 1 part water to 1 part primer mixed with 1 part adhesive to form a brush on slurry.

Allow to dry before tiling.

PREPARATION - WALLS

Plywood / Calcium Silicate Boards


A Rigid framework

B Plywood / calcium silicate board primed with Arc Tilers Primer




Ensure the boards are fixed securely to the framework, screwed at 300mm centres.


Prime the boards with Arc Tilers Primer diluted 3 parts water to 1 part primer & allow to dry.

Use exterior grade or moisture resistant materials.

Approximate maximum tiling weight (dependent on board type and thickness) is 30kg per m² including tiles, adhesive and grout.

A B

CD

A

B

C

D


- 31 -

PREPARATION - WALLS

Tile Backer Boards - Solid/Even Substrates

A Concrete / blockwork / render / brick

B Pro-Flex, T-20 or LT-33

C Tile backer board


Prime the substrate with Arc Tilers Primer diluted

as per label instructions.

Fix the backer board using a 3-6mm bed of

adhesive.

Use jointing tape over joints.

Allow the adhesive to cure before tiling

commences.

PREPARATION - WALLS

Tile Backer Boards - Rigid Framework


A Rigid framework

B Tile backer board

C Jointing tape


Ensure the boards are fixed securely to the framework, screwed at 300mm centres.


Use jointing tape over joints.

Approximate maximum tiling weight (dependent on board type and thickness) is 50kg per m² including tiles, adhesive and grout.

AB

C

D

D Jointing tape

E Pro-Flex, T-20 or LT-33

F Arc Wall & Floor Grout

E

D Pro-Flex, T-20 or LT-33

E Arc Wall & Floor Grout

A

B

C

D

E

F


- 32 -

PREPARATION - FLOORS

Sand & Cement Screed

A Sand & cement screed primed with Tilers Primer

Rapid-Flex or LT-33 Rapid-Set adhesiveB

Arc Flexi-Grout or Arc Wall & Floor GroutC


New sand & cement screed must be left for a minimum of 4 weeks to dry sufficiently.

Remove any loose flaking layers and ensure surface is free of any contaminants, loose dust or dirt.

Prime the screed with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.

Very porous screeds may require more than one coat of primer.


Concrete Base


A Concrete base primed with Tilers Primer




New concrete must be allowed a minimum of 6 weeks drying time. Allow 1 day per mm for an overall depth of 50mm and 2 days per mm for any depth above 50mm.

Remove any laitance from surface & ensure surface is free of any contaminants, loose dust or dirt.

Prime the base with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.

Very porous concrete may require more than one coat.


- 33 -

C

B

A

C

B

A


Anhydrite Screed

A Concrete base

Anhydrite screedB

2 coats of Tilers PrimerC


Anhydrite screed must be confirmed dry via consistent moisture readings. The residual moisture content must be less than 0.5%.

Remove any laitance from surface & ensure surface is free of any contaminants, loose dust or dirt.

Prime with 2 coats of Arc Tilers Primer, the first diluted 3 parts water to 1 part primer followed by a neat coat.

Allow to dry in between coats.


Flooring Grade Asphalt & Bitumen


A Arc Tilers Primer slurry coat




Remove any surface contamination, loose dust or

dirt and ensure there are no signs of debonding or

hollowness.

Prime the surface with Arc Tilers Primer diluted 1

part water to 1 part primer mixed with 1 part

adhesive to form a brush on slurry.


D Rapid-Flex or LT-33 Rapid-Set adhesive

Arc Flexi-Grout or Arc Wall & Floor GroutE


- 34 -

C

B

A

E

D

C

BA


Existing Tiles

A Existing tiles

Arc Tilers Primer slurry coatB

Rapid-Flex or LT-33 Rapid-Set adhesiveC

Arc Flexi-Grout or Arc Wall & Floor GroutD


Ensure existing tiles are firmly bonded to the original substrate.

Remove any loose tiles and make good.

Remove any surface contamination, loose dust or dirt.

Prime the existing tiles with Arc Tilers Primer diluted 1 part water to 1 part primer mixed with 1 part adhesive to form a brush on slurry.



Existing Vinyl Tiles / Vinyl Sheets


A Existing vinyl

Arc Tilers Primer slurry coatB




Ensure existing vinyl is firmly bonded to the original substrate.

Remove any loose vinyl tiles and make good.


Prime the existing vinyl with Arc Tilers Primer diluted 1 part water to 1 part primer mixed with 1 part adhesive to form a brush on slurry.



- 35 -

A

B

C

D

D

C

B

A


Tongue & Groove Floorboards -Plywood Overlay

A Floorboards

Plywood primed with Tilers PrimerB




Plywood must be exterior grade and a minimum of 15mm.

Stagger the joints when fixing the plywood, leaving a 0.5mm to 1mm gap between boards.

Plywood must be screwed, not nailed, at 150mm centres.


Prime the plywood with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.


Tongue & Groove Floorboards -Plastic Ply Overlay


A Floorboards primed with Tilers Primer

Plastic PlyB





Prime the floorboards with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.

Apply the self-adhesive Plastic Ply in a brick type pattern.

Apply tile adhesive ensuring all voids are filled.

See page 11 for more technical details on Plastic Ply Reinforcement Sheets.


- 36 -

D

C

B

A

D

C

B

A


Tile Backer Boards - Timber Floors

A Primed timber floor

Rapid-Flex or Rapid LT-33 B

Tile backer board C



Prime the timber floor with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.

Fix the backer boards with a thin 3 to 6mm bed of adhesive.

Screw fix the boards at 300mm centres.

Use jointing tape to reinforce joints.


Tile Backer Boards - Concrete Floors



New concrete must be allowed a minimum of 6 weeks drying time.

Prime the concrete floor with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.

Fix the backer boards with a thin 3 to 6mm bed of adhesive, ensuring full-surface bonding.

Use jointing tape to reinforce joints.

D Jointing tape

Rapid-Flex or Rapid LT-33E

Flexi or Wall & Floor GroutF

A Primed concrete floor

Rapid-Flex or Rapid LT-33 B

Tile backer board C


D Jointing tape

Rapid-Flex or Rapid LT-33E

Flexi or Wall & Floor Grout F


- 37 -

F

B

A

C

D

E

F

E

C

D

A

B


Electric Underfloor Heating

A Primed concrete or timber substrate

Rapid-Flex or Rapid LT-33B

Tile backer boardC

Underfloor heating D


Ensure existing substrate is firm, stable and in good condition.


Prime the concrete floor with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.

Fix the backer boards with a thin 3 to 6mm bed of adhesive.

Ensure the underfloor heating element / mat is taped down to the substrate.

Embed the underfloor heating element using flexible levelling compound.

Once cured, tile using Rapid-Flex or Rapid Lt-33.

Once complete, allow 7 days before switching the heating on, initially at a low temperature and then increase the temperature gradually by 5°C per day.


Heated Screeds


New sand / cement screeds must be left for a minimum of 4 weeks to dry sufficiently.

The cured screed should be heated gradually, no more than 5°C per day, to a maximum of 25°C and then maintain that temperature for 3 days before allowing it to cool down to room temperature.

Turn off the heating 24 hours prior to tiling, or in cold weather reduce to below 15°C.

Remove any loose flaking layers and ensure the surface is free from any contaminants, loose dust or dirt.

Prime the screed with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.

Very porous screeds may require more than one coat.

Once tiling is completed, allow 7 days before gradually increasing the temperature of the heating.

E Flexible levelling compound

Rapid-Flex or Rapid LT-33F

Flexi or Wall & Floor GroutG

A Primed screed


Arc Flexi-Grout or Arc Wall & Floor Grout C



- 38 -

G

F

C

A

B

DE

C

B

A


Decoupling Membrane

A Primed concrete or sand / cement screed

B Rapid-Flex or LT-33 Rapid-Set adhesive

C Decoupling membrane

Rapid-Flex or LT-33 Rapid-Set adhesiveD

E Arc Flexi-Grout or Arc Wall & Floor Grout


Ensure the original substrate is firm, stable and in good condition.

Remove any loose flaking layers and ensure the surface is free from any contaminants, loose dust or dirt.

Prime the substrate with Arc Tilers Primer diluted 3 parts water to 1 part primer and allow to dry.

Apply a thin 3 to 6mm bed of adhesive and lay the decoupling membrane while the adhesive is still moist.

Allow the adhesive to cure before tiling commences.

See page 12 for more technical details on Sealing and Decoupling Membrane.


- 39 -

E

D

CB

A

PREPARATION - SHOWER / WET ROOM

Tile Backer Boards & Showerlays


Arc recommends the use of tile backer boards and showerlays for a rigid, 100% waterproof and problem free wall & floor tiling substrate.

See separate booklet for installation instructions.

Fully waterproof

Highly insulating

Fix to solid wall/timber

Ready to tile or plaster

Holds 62kg/m2 on walls

40 tonnes/m2 on floors

Lightweight to handle

Easy to cut


Waterproof Tanking System

A Substrate

PrimerB

Sealing TapeC

Tanking PasteD

Pro-Flex, T-20 or LT-33 AdhesiveE

Rapid-Flex or LT-33 Rapid-Set adhesiveF

Sealed Arc Wall & Floor GroutG

Sealed Arc Flexi-Grout or Arc Wall & Floor GroutH

Arc Sanitary Silicone I


Prime substrates with primer as per instructions on pack Apply tanking paste to all corners, joints, outlets etc.

Apply jointing tape over the above mentioned areas

Apply 2 coats of tanking paste to all surfaces. Allow first coat to dry before applying the second

Allow 24 hours before fixing tiles


Sealing Membrane


Prime substrates with primer as per instructions in pack Stick Sealing Tape, Corners & Collars using adhesive or tanking paste

Apply thin bed of flexible adhesive and lay membrane ensuring there are no bubbles or creases

Once dry, tiling can commence

Please refer to the technical data sheet for full installation instructions.

A Primed Substrate

Flexible Tile AdhesiveB

Sealing Tape / Corner Pieces / Wall & Floor CollarsC

Waterproof MembraneD

Pro-Flex, T-20 or LT-33 AdhesiveE

Rapid-Flex or LT-33 Rapid-Set adhesiveF

Sealed Arc Wall & Floor GroutG

Sealed Arc Flexi-Grout or Arc Wall & Floor GroutH



- 40 -

EUROPEAN STANDARDS

PRIMING GUIDE

EXPANSION JOINTS



T

E

C

H

N

I

C

A

L

G

U

I

D

E

Ä

Ä

Ä

C 1 Normal cement based adhesive

C 1F Fast setting cement based adhesive

C 1T Normal cement based adhesive with reduced slip

C 1E Normal cement based adhesive with extended open time

C 1TE Normal cement based adhesive with extended open time and reduced slip

C 1FT Fast setting cement based adhesive with reduced slip

C 2 Improved cement based adhesive with additional characteristics

C 2E Improved cement based adhesive with additional characteristics and extended open time

C 2F Improved fast setting cement based adhesive with additional characteristics

C 2T Improved cement based adhesive with additional characteristics and reduced slip

C 2TE Improved cement based adhesive with additional characteristics, reduced slip and extended open time

C 2FT Improved fast setting cement based adhesive with additional characteristics and reduced slip

D 1 Normal dispersion adhesive

D 1T Normal dispersion adhesive with reduced slip

D 2 Improved dispersion adhesive with additional characteristics

D 2T Improved dispersion adhesive with additional characteristics and reduced slip

D 2TE Improved dispersion adhesive with additional characteristics, reduced slip and extended open time

ADHESIVES UNDER BS EN 12004 :2001

Type Class Description

EUROPEAN STANDARDS

All Arc Tile Adhesives and Grouts are manufactured in accordance with European Standards and meet or exceed the standards for each classification.

EN12004 refers to the general classification for cement based adhesives categorised as Type C. Ready mixed or paste adhesives are categorised as dispersion adhesives Type D. Epoxy resin adhesives are categorised as reaction resin adhesives Type R.

EN12002 is the classification for cement based adhesives with degrees of flexibility or deformable characteristics categorised as Type C Class S.

EN13888 is the general classification for cement based grouts Type C Class G.

ADHESIVES UNDER BS EN 12002 :2002

C S1 Deformable adhesive

C S2 Highly deformable adhesive


GROUTS UNDER BS EN 13888 :2002

CG 1 Cement based grout with normal characteristics

CG 2 Improved cement based grout with additional characteristics


- 41 -

Plaster First coat diluted 1 part primer to 3 parts water and allow to dry, followed by a neat coat

Plasterboards First coat diluted 1 part primer to 3 parts water and allow to dry, followed by a neat coat

Sand / Cement Render Apply 1 coat diluted 1 part primer to 3 parts water

Brick / Block Apply 1 coat diluted 1 part primer to 3 parts water

Existing Tiles Apply one coat of slurry mix of 1 part primer to 1 part water to 1 part tile adhesive

Plywood Apply 1 coat diluted 1 part primer to 3 parts water

WALLS

SUBSTRATE PRIMING GUIDE


Before tiling, the majority of wall and floor substrates will require priming.Substrates are primed for the following reasons:

To improve the adhesion of cement based products Reduce the porosity of porous substrates A slurry coat mix improves the adhesion to non porous surfaces Produce a barrier between calcium sulphate based surfaces and cement based adhesives to minimise the risk of chemical reaction

Arc Tiler’s Primer is a high quality styrene butadiene co-polymer emulsion for use as a primer, bonding agent and sealer.

Available in 1lt, 2.5lt and 5lt.

For detailed guidelines on the complete substrate preparation see pages 29 to 40.

FLOORS


Sand / Cement Screed Apply 1 coat diluted 1 part primer to 3 parts water

Anhydrite Screed First coat diluted 1 part primer to 3 parts water and allow to dry, followed by a neat coat

Concrete Apply 1 coat diluted 1 part primer to 3 parts water

Plywood Apply 1 coat diluted 1 part primer to 3 parts water

Existing Tiles Apply one coat of slurry mix of 1 part primer to 1 part water to 1 part tile adhesive

Vinyl Tiles / Sheets Apply one coat of slurry mix of 1 part primer to 1 part water to 1 part tile adhesive

Asphalt & Bitumen Apply one coat of slurry mix of 1 part primer to 1 part water to 1 part tile adhesive

Fibreglass Apply one coat of slurry mix of 1 part primer to 1 part water to 1 part tile adhesive

Green Screed Apply 1 coat diluted 1 part primer to 3 parts water

- 42 -

Structural Versus Movement JointsStructural joints are physical gaps which divide a building into smaller sub sections accommodating differential movement between each sub section. Movement joints are small joints designed to absorb localised stresses.

Causes of MovementStructural: Structural settlement Structural deformation due to loading Drying shrinkage Ambient thermal gain and loss Wind loading Seismic events

Localised Movement: Drying shrinkage of localised adjacent substrates Small scale localised deformation such as creep Ambient thermal differentials Imposed thermal variations such as underfloor heating

Movement JointArc supply 2 types of movement joint:1. Optimax Aluminium Heavy Duty Aluminium (MSA). These movement joint profiles are designed to accommodate localised stresses within tiled floors. The aluminium side section of the profile offers protection to the tile edge while the santoprene infill offers outstanding flexibility, tensile strength and chemical and weathering resistance. The anchoring angles are aluminium grade 6063 T6, which is heat treated to increase tensile strength.2. PVC Movement & Perimeter Joint (MLB). This is a co-extruded PVC movement control joint designed to appear as discretely as a grout line whilst absorbing localised compression and expansion stresses. The PVC is resistant to most chemicals and detergents generally used in tiled applications. It has a detachable anchor which allows the joint to be used as a perimeter joint.

Positioning of Movement JointsThe theory is to create “tile fields” large enough to absorb differential movement between the substrate and the tile covering. Movement joints should be installed in certain areas to prevent tiles or grout from cracking or to prevent the tiles from tenting and becoming debonded from the substrate.

The exact positioning of movement joints is vital to them successfully protecting the installation. Industry guidelines suggest that the maximum tile field should be no more than 10 metres in each direction. In practice, depending on the individual application, it tends to be between 5 and 8 metres.

WHEN TO USE EXPANSION / PERIMETER JOINTSBased on BS 5385

(A) Any area greater than 2m x 1m where the tiling abuts walls requires perimeter joints as a minimum(B) For larger areas, the maximum distance between joints should not be greater than 8m in any direction

In addition movement joints should always be installed directly above

(1) Changes in the substrate(2) Structural joints in the substrate(3) Gaps in the substrate

InstallationEnsure the correct depth of movement profile is selected according to tile depth. Using a suitable notched trowel spread the tile adhesive onto the substrate and firmly bed the profile, ensuring the adhesive penetrates the holes in the flange and covers the anchoring legs. Best practice is for the profile to be about 1mm lower than the tile. A grout joint should be left between the tile and the profile.

EXPANSION JOINT GUIDE

- 43 -

NOTES:

we are stronger tiles adhesive product & tiling guide€¦ · tanking kit sealing &...

Documents