weatherbars door surrounds & diy products - exitex · weatherbars door surrounds & diy...
TRANSCRIPT
1
WeatherbarsDoor Surrounds & DIY Products
SEALED IN QUALITY
For Timber, Composite & PVC Doors
2
All Exitex draught & weather seals are manufactured to the highest standards, incorporating many unique patented features.
Qualityyou can trustAluminiumHardened High Tensile to BS 1474
Anodising15-25 Micrometers BS 3987
Powder Coating 60-80 Micrometers BS 6496
EPDMGaskets to BS 4255
EPDMCellular Rubber Gaskets to SS 243705A1, SS81813
PVCGaskets to BS 7412
2
3
Thresholds
Mobility Weatherbars inward or outward opening
Mobility Weatherbars inward opening
Mobility Weatherbars outward opening
Non Mobility Weatherbars inward or outward
opening
4
12
24
28
Accessories
Aluminium Tiebars
Deflectors
Garage Door Seals
Bi-Fold Threshold
Stable Door Kit
Lock Edges for Composite Doors
Hinge Edges for Composite Doors
Door Surrounds
DIY Products
Floor Trims
33
34
36
38
40
41
42
44
46
47
50
Key
MPART
Wheelchair Friendly
Moderate Exposure
Severe Exposure
Part M - Approved
Contents
Weatherbars Door Surrounds& DIY Products
For Timber, Composite & PVC Doors
4
Thresholds
MXS 15/67 Accepts frame specific end caps to suit:
- Eurocell Composite, Liniar Composite
- Duraflex Composite, Veka Composite
- Rehau Composite, Synseal Legend
- Plastmo Vogue, Plastmo Index - Spectus 63
- Eco Frame, Profile 22
Easily removable for remedial work
Available in mill & gold
In sizes: 880mm to 6020mm
Inward
Ref: 1.01.0389
MPART
MXS 15/67 Infill
Outward
Ref: 1.01.0396
MPART
15mm
7mm
12mm
67mm
48mm
Remove gasket as per illustration
Insert aluminium infill
Available in mill & gold
In sizes 1000mm to 6020mm
Outward Infill
Removegasket
Sealant
5
MXS 15/72
Inward
Ref: 1.01.0387
MPART
MXS 15/72 Infill
Outward
Ref: 1.01.0388
MPART
Thresholds
Accepts frame specific end caps to suit:
- Rehau 706
- Spectus Elite 70
- Swish 24/7
- Duraflex PVC
Easily removable for remedial work
Available in mill & gold
In sizes 880mm to 6020mm
Remove gasket as per illustration
Insert aluminium infill
Available in mill & gold
In sizes 1000mm to 6020mm
15mm
7mm
12mm
72mm
55mm
Outward Infill
PVC Door
Removegasket
Sealant
6
10.9mm
80mm
45mm
17mm
18mm
Threshex
Available in mill, gold, bronze & black
In sizes from 933mm to 4590mm
Inward & Outward
Ref: 1.01.0450
MPART
Slimline
Available in mill, gold & bronze
In sizes from 914mm to 4590mm
Inward & Outward
Ref: 1.01.0420
MPART
Thresholds
7
9.5mm
44mm
20mm 25mm
KLT 25
13.5
mm
15mm
48mm
27mm
Kleertred 20 & 25
Available in mill, gold & black
In sizes from 914mm to 4590mm
Inward & Outward
20 Ref: 1.01.0200
25
MPART
Thresholds
Universal Mobility Threshold
Available in mill & gold
In sizes from 914mm to 4590mm
Inward & Outward
Inward Ref: 1.01.0530
Outward
MPART
Ref: 1.01.0205
Ref: 1.01.0535
8
Industrial/CommercialThreshold Weatherbar
Accommodates forklifts & heavy goods vehicles
Suitable for roller shutters
Available in mill & gold
In sizes from 1000mm to 4590mm
Inward & Outward
Ref: 1.01.0180
MPART
Thresholds
MVS Weatherbar
Inward
Outward Ref: 1.01.0545
MPART
Separate deflector & seal carrier
Available in mill & gold
In sizes from 914mm to 4590mm
12mm
127mm
5mm
44mm
25mm
15mm 12mm
Ref: 1.01.0540
9
Inward & Outward
IOR Ref: 1.01.0190
IOR Packer
IOR
IOR Packer available separately in mill
Available in SAA & gold
In sizes from 1000mm to 4590mm
MPART
Thresholds
Concealex A1502
Automatic door bottom seal
Acoustic rating - 41db
Can be trimmed up to 100mm
In sizes 0.8m, 0.9m, 1m, 1.1m, 1.2m, 1.3m & 1.4m
Inward & Outward
Ref: 1.01.0100
MPART
30mm
23mm
TPE Gasket
11.8mm
28mm
13mm
3mm
115mm
IOR Packer IOR Packer
Aquatex S25
25mm
10-18mm
7mm
14.5mm
Ref: 1.01.0192
10
CDT 91
Available in mill & gold
In sizes from 1000mm to 3000mm
Inward & Outward
Ref: 1.01.0453
MPART
CDT 95
Available in mill & gold
In sizes from 1000mm to 3000mm
Inward & Outward
Ref: 1.01.0448
MPART
Thresholds
12.5mm9.5mm
91mm
49mm
12.5mm9.5mm
95mm
51mm
11
CDT 100
Available in mill
In size 3600mm
Inward & Outward
Ref: 1.01.0458
MPART
Thresholds
CDT 128
Available in mill
In sizes from 1000mm to 3000mm
Inward & Outward
Ref: 1.01.0454
MPART
10mm
100mm
9.5mm
128mm
14mm
49mm
49mm
12.5mm
12
MXS 15
Detachable ramp eliminates the need for notching
Available in mill & gold
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0315
MPART
MXS 15/2
Accepts MWK striker block for flush bolts in double doors
Available in mill, gold & black
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0317
MPART
Thresholds
13mm
13mm
15mm
15mm
6mm
9.5
mm
73mm
62mm
44mm
47mm
13
MXS 15/2/TB
Inward
Ref: 1.01.0760
MPART
Available in mill, gold & black
In sizes from 914mm to 4590mm
Thermally broken prevents condensation
Thresholds
15mm
9.5
mm
13mm
62mm
47mm
MXS 15/4
Accepts MWK striker block for flush bolts in double doors
Rear thermal barrier prevents condensation
Available in mill & gold
In sizes from 1000mm to 4590mm
Inward
Ref: 1.01.0313
MPART
13mm
15mm
7mm
71mm
53mm
14
Thresholds
MXS 15/56
Designed for 56mm thick doors
Accepts MWK striker block for flush bolts in double doors
Available in mill, gold & black
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0314
MPART
13mm15mm
9.5
mm
71mm
56mm
MXS 15/68
Inward
Ref: 1.01.0312
MPART
Designed for 56mm thick doors
Accepts MWK striker block for flush bolts in double doors
Available in mill & gold
In sizes from 914mm to 4590mm
9.5mm
80mm
15mm
68mm
15
Auto Seal
An automatic rise & fall draught excluder
Barrier free access ideal for wheelchairs
Available in gold & SAA
In sizes from 914mm to 1220mm
Inward
Ref: 1.01.0016
MPART
Thresholds
48mm40mm
up to 25mm
MDS 25/5/2/TB
Accepts MWK striker block for flush bolts in double doors
Thermally broken prevents condensation
Optional rear ramp available separately
Available in gold & SAA
In sizes from 1000mm to 4590mm
Inward
Ref: 1.01.0750
MPART
25mm
115mm
20mm
14m
m
16
Thresholds
MDS 25/58
Accepts MWK striker block for flush bolts in double doors
Thermally broken prevents condensation
Optional rear ramp available separately
Suitable for 58mm doors
Available in gold & SAA
In sizes from 1000mm to 4590mm
Inward
Ref: 1.01.0751
MPART
20mm
14m
m
122.6mm
25mm
MDS 80
Rear thermal barrier prevents condensation
Available in gold & SAA
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0264
20mm
25mm
15m
m
80mm
17
Thresholds
MDS 80/2 TB
Inward
Ref: 1.01.0754
Optional front & rear ramp available separately
Accepts MWK striker block for flush bolts in double doors
Thermally broken prevents condensation
Available in gold & SAA
In sizes from 1000mm to 4590mm
25mm
14m
m
20mm
76.5mm
MDS 80/2/58
Inward
Ref: 1.01.0753
Optional front & rear ramp available separately
Accepts MWK striker block for flush bolts in double doors
Thermally broken prevents condensation
Suitable for 58mm doors
Available in gold & SAA
In sizes from 1000mm to 4590mm
86mm
25mm
14m
m
20mm
18
Thresholds
MDS 150/TB
Accepts MWK striker block for flush bolts in double doors
Thermally broken prevents condensation
Optional rear ramp available separately
Available in gold & SAA
In sizes from 1000mm to 4590mm
Inward
Ref: 1.01.0756
MPART
20mm25mm
150mm
MDS 150/58
Accepts MWK striker block for flush bolts in double doors
Thermally broken prevents condensation
Optional rear ramp available separately
Suitable for 58mm doors
Available in gold & SAA
In sizes from 1000mm to 4590mm
Inward
Ref: 1.01.0761
MPART
158mm
25mm
14m
m
20mm
14m
m
19
MWK 20
No seals underfoot to be damaged by foot traffic
Rear thermal barrier prevents condensation
Available in mill, gold, bronze & black
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0280
MPART
15mm
9mm
68mm
20mm
44mm
Thresholds
MPART
MPART
MDS 80/2 Front Ramp MDS Rear Ramp
Suitable for MDS 25, MDS 80/2 & MDS 150
Available in gold & SAA
In sizes from 914mm to 4590mm
Ref: 1.01.0762
Suitable for MDS 80/2
Available in gold & SAA
In sizes from 914mm to 4590mm
Ref: 1.01.0763
29 mm 20mm
12.5mm17mm
20
MWK R/20/56
Designed for 56mm thick doors
No seals underfoot to be damaged by foot traffic
Detachable front ramp eliminates need for notching
Available in mill & gold
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0490
Thresholds
MPART
MWK R/2/20
Separate components eliminates need for notching
Rear thermal barrier prevents condensation
Available in mill & gold
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0286
MPART
15mm
10mm
56mm
20mm
15mm
73mm
45mm
20mm
21
MWK 25
No seals underfoot to be damaged by foot traffic
Rear thermal barrier prevents condensation
Available in mill & gold
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0290
MWK R/2/25/MK2
No seals underfoot to be damaged by foot traffic
Detachable front ramp eliminates need for notching
Available in mill & gold
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0460
Thresholds
MPART
20mm
15mm
68mm
25mm
15mm
10mm
45mm
25mm
22
MWK 95
No seals underfoot to be damaged by foot traffic
Rear thermal barrier prevents condensation
Available in mill & gold
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0295
Thresholds
MWK 27
No seals underfoot to be damaged by foot traffic
Rear thermal barrier prevents condensation
Available in mill & gold
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0297
MPART
22.5mm
15mm
95mm
46mm
25mm
ThermalBarrier
15mm
9mm
68mm
27mm
44mm
23
MWK 104
Designed for 56mm thick doors
No seals underfoot to be damaged by foot traffic
Rear thermal barrier prevents condensation
Available in mill & gold
In sizes from 914mm to 4015mm
Inward
Ref: 1.01.0296
IOS/I
No seal underfoot to be damaged by foot traffic
Deflector & seal carrier available separately (optional)
Available in mill & gold
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0700
Thresholds
MPART
22.5mm
15mm
104mm
56mm
25mm
18.5mm
8.5mm
60mm
13.5mm
24
Thresholds
OUM
No seals underfoot to be damaged by foot traffic
Available in mill & gold
In sizes from 914mm to 4590mm
Outward
Ref: 1.01.0330
MPART
OUM TD
Outward
Ref: 1.01.0331
MPART
Designed for doors 44mm thick & over
Separate deflector & seal carrier
Available in mill & gold
In sizes from 914mm to 4590mm
44mm
15mm20mm
44mm
15mm
20mm
Any thickness of Door
25
Thresholds
OUM 2/TB
Thermally broken prevents condensation
Available in gold & SAA
In sizes from 1000mm to 4590mm
Accepts MWK striker block for flush bolts in double doors
Outward
Ref: 1.01.0759
12mm
101mm
22.5mm
55mm
OUM 4
Accepts MWK striker block for flush bolts in double doors
Available in mill, gold & black
In sizes from 914mm to 4590mm
Outward
Ref: 1.01.0339
9mm
69.4mm
15mm
55mm
MPART
26
Thresholds
OUM 5/TB
Accepts MWK striker block for flush bolts in double doors
Thermally broken prevents condensation
Available in mill & gold
In sizes from 1000mm to 4590mm
Outward
Ref: 1.01.0758
MPART
7mm
71.5mm
15mm
55mm
OUM 6
Accepts MWK striker block for flush bolts in double doors
Designed for doors 56mm thick and over
Available in mill & gold
In sizes from 914mm to 4590mm
Outward
Ref: 1.01.0343
MPART
9mm
78.5mm
15mm
67mm
27
OUM 150/TB
Outward
Ref: 1.01.0757
Thresholds
Thermally broken prevents condensation
Available in gold & SAA
In sizes from 1000mm to 4590mm
12mm
150mm
26mm
OUM 80/TB
Optional front & rear ramp available separately
Thermally broken, prevents condensation
Available in gold & SAA
In sizes from 1000mm to 4590mm
Outward
Ref: 1.01.0765
74mm
47mm
25mm12.5mm
28
Thresholds
Double Sealing Sill
Accepts standard striker block for flush bolts in double doors
Available in mill, gold & bronze
In sizes from 914mm to 4590mm
Inward & Outward
Ref: 1.01.0120
Adjustex
Base section allows for up to 6mm of adjustment
Available in mill & gold
In size 914mm
Inward & Outward
Ref: 1.01.0004
47mm
17mm 21mm
35mm
44mm
25mm
18mm
29
Weatherten Lowline
Inward
Ref: 1.01.0501
Thresholds
Accepts standard striker block for flush bolts in double doors
Available in mill, gold, bronze & black
In sizes from 914mm to 4590mm
46mm
25mm20mm
Weatherten Bar
Inward
Ref: 1.01.0500
Accepts standard striker block for flush bolts in double doors
Available in mill, gold, bronze & black
In sizes from 914mm to 4590mm
46mm
30mm25mm
30
Macclex Lowline
Inward
Ref: 1.01.0305
Thresholds
Accepts standard striker block for flush bolts in double doors
Available in mill, gold, bronze & black
In sizes from 914mm to 4590mm
46mm
25mm20mm
Macclex
Inward
Ref: 1.01.0300
Accepts standard striker block for flush bolts in double doors
Available in mill, gold, bronze & black
In sizes from 914mm to 4590mm
46mm
30mm 25mm
31
Macclex 38
Inward
Ref: 1.01.0310
Bristlex
Front seal pile
Rear seal bristle
Available in mill & gold
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0070
Thresholds
Accepts standard striker block for flush bolts in double doors
Available in mill & gold
In sizes from 914mm to 4590mm
47mm
45mm
38mm
30mm
28mm25mm
20mm
32
OUD
Accepts standard striker block for flush bolts in double doors
Available in mill, gold, bronze & black
In sizes from 914mm to 4590mm
Outward
Ref: 1.01.0325
Thresholds
Hi Per Bar
No seals underfoot to be damaged by foot traffic
Available in mill, gold, bronze & black
In sizes from 914mm to 4590mm
Inward
Ref: 1.01.0170
48mm
34mm
24mm
44mm
30mm
16mm
33
Accessories
MWK Striker Blocks & Accessories
This profile fits into the channel of the MDS range of
weatherbars allowing the sidelight to sit on top
Fits to bottom of PVC door to give a flush finish
Available in mill & gold
In sizes from 1000mm to 3000mm
Supplied with end caps
Supplied complete with end caps
Available in mill & gold
In sizes from 1000mm to 3000mm
Fits to bottom of PVC door to give a flush finish
Available in mill & gold
In sizes from 1000mm to 3000mm
Supplied with end caps
Ref: 1.01.0351
Ref: 1.01.0352
MDS 25/2 Ramp Protector
Ref: 1.10.0140
Bottom Door Infill
Side Light Infill
Ref: 1.01.0268
Bottom Door Infill
a. MWK striker block can be supplied blank or pre-machined for adjustment
b. Optional shoot bolt keep can be used in conjunction with the MWK Striker Block or on its own
Length - 1m & 3m
PVC clip on ramp protector
Available in black
51mm
21mm 17mm
45mm
20mm
34
Aluminium Tiebars
MTB Tie Bar 3x60 Flat Tie Bar
PTB 114 & 85 Tie Bars MDS 25 Tie Bar
Suitable for Adjustex (p28), DSS (p28) & HPB (p32)
Available in mill, gold & black
In sizes from 1000mm to 4590mm
Available in mill
In sizes from 1000mm to 4590mm
Available in mill & gold
In sizes from 1000mm to 3000mm
Available in mill
In sizes from 1000mm to 3000mm
Ref: 1.01.0270 Ref: 1.01.0259
PTB 114 - Ref: 1.01.0341
PTB 85 - Ref: 1.01.0340
Ref: 1.01.0256
119mm
85mm
23.5mm17.5mm
6mm
9mm
15o
60mm
3mm
9mm
14.5mm
114mm
85mm93mm
35
Aluminium Tiebars
CDT 127 Tie Bar
CDT 101
Available in mill
In sizes from 1000mm to 3000mm
Ref: 1.01.0456
Ref: 1.01.0447
127mm
6mm
MDS 80 10mm Packer
Available in mill & gold
In sizes from 1000mm to 3000mm
Ref: 1.01.0572
CDT 63 Tie Bar
Available in mill
In sizes from 1000mm to 3000mm
Available in mill
In sizes from 1000mm to 3000mm
Ref: 1.01.0449
63mm 101mm
6mm7mm
83mm
10mm
63mm
6mm
127mm
6mm
36
Deflectors
Deflector 20
Inward & Outward
Ref: 1.01.0110
Expelex Concealed Fix
Inward & Outward
With Seal Ref: 1.01.0142
Without Seal
No visible screws
Available in mill, gold, black, white, blue, green & red
In sizes 914mm
Available in mill, gold, white, black & bronze
In sizes from 914mm to 4590mm
20mm
29mm
18.5mm
33mm
Fixing ScrewPlacement
22mm
Ref: 1.01.0143
37
Inward & Outward
With Seal
Without Seal Ref: 1.01.0146
Deflectors
Radius Concealed Screw Fix
Inward & Outward
Expelex
Available in mill, gold, bronze, black & white
In sizes from 914mm to 4590mm
No visible screws
In mill, gold, black, green, red, blue & white
In sizes from 914mm to 4590mm
19mm
37mm
Ref: 1.01.0148
Ref: 1.01.0145
19mm
37mm
38
Deflectors / Garage Door Seals
ERD Rain Deflector
Inward & Outward
Without Seal Ref: 1.01.0130
With Seal
Garex
Suitable for steel, timber or composite doors
Available in mill, gold, bronze, black & white
In sizes from 914mm to 4590mm
Inward, Outward & Roller Shutter doors
Ref: 1.01.0163
MPART
Available in mill & gold
In sizes from 914mm to 4590mm
51mm
39mm
45mm
Ref: 1.01.0132
39
Garin
Suitable for steel, timber or composite doors
Available in mill, gold, bronze, black & white
In sizes from 914mm to 4590mm
Inward, Outward & Roller Shutter doors
Ref: 1.01.0160
MPART
GIFS & IFS
Suitable for steel, timber or composite doors
Available in mill
In sizes from 914mm to 4590mm
Inward, Outward & Roller Shutter doors
GIFS - Ref: 1.01.0185
IFS - Ref: 1.01.0182
Garage Door Seals
MPART
45mm
30mm
45mm
30mm
30mm
GIFS IFS
40
Bi-Fold Threshold
Outward
Ref: 1.01.0440
Bi-Fold Threshold
Bi-Fold Connector End Cap
Ref: 1.12.0269
Ref: 1.01.0441
Ref: 1.12.0268
BiFold end cap
Machining Detail
Bi-Fold Head Track
Length: 1m to 6m
Finish: Brown, SAA, Gold & Black
176mm
Aquatex A10
25mm
15.5mm
34mm
Length: 1m to 6m
Finish: SAA.
35mm
18mm
16.8mm
38mm
41
Stable Door Kit
Stable Door Kit consists of:
A. Expelex Concealed Fix 914mm x 2 pieces
B. Double Door Centre Seal 914mm x 2 pieces
Available in gold, silver, white, black, blue, green & red
Ref: 1.01.0965
Stable Door Kit
ExpelexConcealed Fix
Double DoorCentre Seal
A
A
B
B
42
Lock Edges for Composite Doors
Colour: White Ral 9010, Brown Ral 8011, Brown Ral 8017, Brown Ral 8003
For 20mm Lock Face Plate
Colour: White Ral 9016
For 20mm Lock Face Plate
Aluminium
Ref: LE1/44/20/5443
Aluminium
Ref: LE2/44/20/7216
Colour: White Ral 9910
For 16mm Lock Face Plate
Colour: White Ral 9010, Brown Ral 8017
For 16mm Lock Face Plate
Aluminium
Ref: LE4/44/16/5651
Aluminium
Ref: LE5/44/16/5799
Colour: White Ral 9010, Brown Ral 8003, Brown Ral 8017
For 20mm Lock Face Plate
Colour: White Ral 9010
For 20mm Lock Face Plate
Aluminium
Ref: LE6/44/20/5798
Aluminium
Ref: LE8/50/20/6064
44mm
20.5mm
14mm
44.5mm
20.5mm
14mm
44mm 44mm
17.8mm17mm
15.8mm13.5mm
14mm
44mm
20.5mm
14mm
50mm
20.5mm
14mm
43
Lock Edges for Composite Doors
Colour: White
For 16mm Lock Face Plate
Colour: White
For 20mm Lock Face Plate
PVC
Ref: LE9/PVC
PVC
Ref: LE10/PVC
Double Door Rebate Lock Set
Suitable for 44mm Door Slabs Aluminium
Colour: White Ral 9010
For 16mm Lock Face Plate on Rebated Doors
Colour: White Ral 9010
For 16mm Lock Face Plate on Rebated Doors
Aluminium
Ref: LE17
Aluminium
Ref: LE18
44.5mm
17mm
14.5mm
44.5mm
20.5mm
14.5mm
44mm
22mm
21mmSlave Doorlock
MasterDoorlock
Aquatex Weatherseal
Surface Protection
4.5mm
7mm
68mm
37mm 37mm
62mm
17mm17mm
44
Hinge Edges for Composite Doors
Colour: White Ral 9016, Brown 8017
Suitable for 44mm door
Colour: White Ral 9010, Brown 8017, Brown 8011
Suitable for 44mm door
Colour: White Ral 9910, Brown 8011
Suitable for 44mm door
Colour: White Ral 9010, Brown 8017, Brown 8011
Suitable for 44mm door
Aluminium
Ref: HE1/44/5694
Aluminium
Ref: HE3/44/6023
Aluminium
Ref: HE2/44/5652
Aluminium
Ref: HE4/44/5925
Colour: White Ral 9010, Brown 8017, Brown 8016, Brown
8003, Brown 8001
Suitable for 44mm door
Colour: White Ral 9010, Brown Ral 8017
Suitable for 44mm door
Aluminium
Ref: HE6/44/6279
Aluminium
Ref: HE8/44/6484
44.5mm
44mm
12mm 5.5mm
6mm
44mm
44.5mm
14mm
7.5mm
44.5mm44mm
4mm3mm
45
Hinge Edges for Composite Doors
Colour: White Ral 9016
Suitable for 44mm door
Colour: White, Brown
Suitable for 44mm door
Aluminium
Ref: HE11/44/7250
PVC
Ref: HE12/PVC
Colour: White Ral 9016
Suitable for Rebated Doors
Colour: White Ral 9010
Suitable for Rebated Doors
Aluminium
Ref: HE13
Aluminium
Ref: HE14
Elast-O-Sealant
Available in black, brown, white, grey & clear
All weather sealant
Can be applied to wet surfaces
Sticks to most construction material
Can be overpainted
Long life flexibility
Mould & mildew resistant
Ref: 1.18.0400
44.5mm44.5mm
5mm4mm
68mm 62mm
22mm22mm
46
Door Surrounds
Standard Door Seal Flex ‘n’ Seal
PVC Pile Weather Set Aluminium Pile Weather Set
QDS Windor
Aluminium carrier with TPE gasket
Available in mill, gold, bronze, black & white
In sizes 914mm, 2134mm, 2440mm, 5180mm & 6090mm
Aluminium carrier with EPDM rubber gasket
Available in mill, gold, bronze, black & white
In sizes 914mm, 2134mm, 2440mm, 5180mm & 6090mm
PVC carrier with polypropylene pile
Available in white & brown
In sizes 914mm, 2134mm & 5180mm
Aluminium carrier with polypropylene pile
Available in mill
In sizes 914mm, 2134mm & 5180mm
Aluminium carrier with Aquatex™ gasket
Available in mill & gold
In sizes 914mm, 2134mm & 5180mm
Dualhard PVC door surround
Available in white & brown
In sizes 914mm, 2134mm & 5180mm
Screw Fix Ref: 1.01.0400 Pin Fix Ref: 1.01.0151
Pin Fix Ref: 1.01.0345 Pin Fix Ref: 1.01.0347
Pin Fix Ref: 1.01.0415 Pin Fix Ref: 1.01.0455
24mm19mm
16mm
6mm
6mm
12mm
16mm 16mm
15mm
28mm
6mm
8mm7mm
16mm
14mm10mm
16mm13mm
47
QBS External
Double Door Centre Seal
QBS Internal
Bladeseal
PVC carrier with foam gasket
Available in brown & white
In sizes 2030mm & 5180mm
Aluminium carrier with EPDM rubber seal
Available in mill, gold, brown, white & black
In size 2400mm
PVC carrier with foam gasket
Available in brown & white
In sizes 2030mm & 5180mm
Dualhard PVC door bottom
Available in brown & white
In size 914mm
Ref: 1.22.0001
Ref: 1.01.0105 / 16mm
Ref: 1.01.0106 / 30mm
Ref: 1.22.0003
Pin Fix Ref: 1.01.0074
Underdoor Foam Draught Excluder
Fits all Internal Doors
Easily installed
Available in grey
In size 914 mm
Ref: 1.01.0941
16mm
8mm
15mm
30mm
11mm
21mm
11mm
30mm
10.5mm
DIY Products
Bladex
Aluminium carrier with TPE flipper
Available in mill, gold & bronze
In size 914mm
Screw Fix Ref: 1.01.0019
17mm
48
DIY Products
E Strip P Strip
Radiator Heat Reflector Foil
Ref: 1.03.0001
Self adhesive EPDM rubber
Seals gaps 2 - 3.5mm
Available in white & brown
Packed in 5m display pack or 100m reel
Ref: 1.03.0002
Self adhesive EPDM rubber
Seals gaps 2 - 5mm
Available in white, brown & black
Packed in 5m display pack or 100m reel
Ref: 1.01.0397
4mm 5.5mm
9mm9mm
Fits all radiators
Size: 5m x 500mm approx
Reflects warmth, increases heating effect
Easily fitted
Self Adhesive Foam
Standard 4mm thick x 6mm wide - Ref: 1.01.0380
Extra Wide 4mm thick x 10mm wide - Ref: 1.01.0382
Extra Thick 6mm thick x 8mm wide - Ref: 1.01.0384
Packed in 5m & 15m display packs
Self Adhesive Polypropylene Pile
Available in white, brown & grey
Packed in 5m display pack or 100m reel
Ref: 1.01.0425
7mm
5mm
Insulated Outside Tap Cover
Ref: 1.01.0980
Frost Protection for taps
Fits most taps
Easy to install
Taps can be used with cover left on
49
DIY Products
PVC Letterplate Seal with & without Flap
Glazing Film
Aluminium Letterplate Sealwith Flap
Brushstrip Concealed Fixings
Brushstrip Industrial Brushstrip
Available in pecan, light oak, mahogany, white & brown
In size 914mm
Bristle height 22mm
Bristle heights 18mm, 30mm, 40mm, 50mm
Available in mill & gold (aluminium), white & brown (PVC)
In sizes from 914mm to 2134mm
Bristle height 80mm Ref: 1.01.0075
Bristle height 120mm Ref: 1.01.0076
Available in mill, white & black
In sizes from 914mm to 3000mm
LPS (no flap) Ref: 1.01.0212
LPS (with flap) Ref: 1.01.0210
Available in white & brown
High impact PVC with long lasting bristle.
Stops draughts, dust & rain. For internal use
1.8m2 1.5m x 1.2m - Ref: 1.01.0391
4.5m2 1.5m x 3m - Ref: 1.01.0390
9m2 1.5m x 6m - Ref: 1.01.0392
Creates a secondary glazing effect on windows
Prevents draughts. Reduces heating costs
Ref: 1.01.0210
Available in gold, SAA & black
Aluminium flap with long lasting bristle
Stops draughts, dust & rain
For internal use
Ref: 1.01.0042
Aluminium Ref: 1.01.0062-65
PVC Ref: 1.01.0032-035
Pecan Light Oak
Mahogany
80mm
80mm
343mm
343mm77mm
16mm
293mm
30mm
50
Floor Trims
Conceals & protects joints between vinyl/hard floor coverings. Suits all grades/thicknesses.
Product Code - 1.33.0010
Length - 914mm & 2750mm
Colours - SAA & Gold Anodised
Narrow Vinyl Cover Trim
24mm
Conceals & protects joints between vinyl/hard floor & carpet coverings.
Product Code - 1.33.0020
Length - 914mm & 2750mm
Colours - SAA & Gold Anodised
Vinyl/Carpet Cover Trim
37mm
Designed to cover the join between two soft/carpet floor coverings.
Product Code - 1.33.0030
Length - 914mm & 2750mm
Colours - SAA & Gold Anodised
Carpet Cover Trim
35mm
Extra wide for covering large or damaged joints between any two floor coverings.
Product Code - 1.33.0040
Length - 914mm & 2750mm
Colours - SAA & Gold Anodised
Commercial Cover Trim
60mm
Provides the perfect finish for vinyl/tiles/carpet up to 4mm thick.
Product Code - 1.33.0050
Length - 914mm & 2750mm
Colours - SAA & Gold Anodised
Provides the perfect finish between carpet and laminate/wood flooring.
Product Code - 1.33.0060
Length - 914mm & 2750mm
Colours - SAA & Gold Anodised
Vinyl Edge Trim (Small) Laminate Z Trim
28mm
27mm
8mm4mm10mm
51
Round Edge Floor Trim
Floor Trims
Designed for joining wood or laminate flooring. Ideal for doorways.
Product Code - 1.33.0110
Length - 914mm & 2750mm
Colours - SAA & Gold Anodised
Designed for joining wood/ laminate floors to different levels.
Product Code - 1.33.0120
Length - 914mm & 2750mm
Colours - SAA & Gold Anodised
Provides the perfect finish for edging to carpets which require an underlay.
Product Code - 1.33.0070
Length - 914mm & 2750mm
Colours - SAA & Gold Anodised
Provides the perfect finish & secures two carpets neatly (not suitable on foam backed).
Product Code - 1.33.0080
Length - 914mm & 2750mm
Colours - SAA & Gold Anodised
Single Nap Carpet Trim Dual Edge Carpet Trim
50mm
20mm
31mm
8mm
10mm
Provides the perfect finish for vinyl/tiles/carpet up to 5.5mm thick.
Product Code - 1.33.0090
Length - 914mm & 2750mm
Colours - SAA & Gold Anodised
Provides the perfect finish to edging of laminate and wood flooring.
Product Code - 1.33.0100
Length - 914mm & 2750mm
Colours - SAA & Gold Anodised
Vinyl Edge Trim (Large)
Double Edge Floor Trim
Laminate Square Edge Trim
29mm
45mm
29mm
51.5mm
5.5mm9mm
11mm 11.5mm
52
Exitex LtdDundalkIreland
T: (+353 42) 9371244F: (+353 42) 9371221Email: [email protected]
www.exitex.com
Joinery Seals & Glazing
Capex & Cresfinex (Roof Glazing)
Other Brochures Available:
WB/0614