welcome to the trust hijacker quick start guide. …...welcome to the trust hijacker quick start...
TRANSCRIPT
Welcome to the Trust HiJacker Quick Start Guide. In this Quick Start guide we will
step through setting up your first project in the Trust Hijacker software with the
basic settings, and this will be the default setup for most users.
Before you Begin
Before setting up your first project it’s important to check that your PC has all the
supporting resource files installed so that Trust HiJacker will run smoothly. So
before you begin, head over to the forum thread here
https://petestrafficsuite.com/showthread.php?3470-All-Software-Pre-
Requsitesand-Requirements and go through and install all the pre-requisite files
and read through the other notes on that thread. Also note in that thread the
instructions regarding Google Security email which you’ll need to approve in each
Google account the very first time you use an account in the software.
Once you’ve finished those steps you are ready to get started with your first
project. Note – Once you’ve installed all the pre-requisite files, if you do
experience any problems running the software then be sure to submit a support
ticket over at the support desk here http://support.hangoutmillionaire.com
(register first then submit a new ticket) and our friendly support team will be
happy to assist to get you up and running quickly.
What you need for your project
Here is a list of things you’ll need to input into your Trust Hijacker project, so it’s
best to have these ready before you start setting things up.
A list of keywords - one main keyword plus some additional keywords (5-7 is a
good start).
Your redirection url – This is the website url that you wish to promote. Note this
url MUST be a secure url (so it must start with https). Do not just add the letter S
to a http url. When you open your site in a web browser check that it is secure by
entering https at the start. If you see beside the url a note that it is secure then you
can use the https url as your redirection url in your project.
A text Article related to your keyword – a short 200 to 400 word article is all you
need but can be larger
Two Google accounts – You need two separate Google accounts for a project.
Images – You need some images related to your keyword (5 to 10 is ideal) saved
into a folder on your computer with nothing else inside the folder, only the images.
The ideal dimensions for images is 1280 x 720 pixels. If you don’t already have
images you can go to a site such as https://pixabay.com/ and search for your
keyword and download royalty free images from there for your project.
Youtube Video Urls – Here we need high ranking, high view count videos for your
keyword. So head over to Youtube.com and enter your keyword in the search field
then copy the video url and paste into a text file.
Note – Using the steps above you will get the full video url which starts with
https://www.youtube.com/watch?v= followed by the video id which is the correct
format to enter into the software. DO NOT use youtube shortened urls (which start
with https://youtu.be ) in your projects as this will cause the videos on the google
site pages to show an error and not play.
Setting up Your Project
Profiles Tab – For your first project (or when you need to create a new project)
we’ll leave the drop-down option as it is to create a new project then click Next.
(After you’ve created projects, they will appear in the drop-down list to choose to
run them again).
1. Main Keyword Tab
Next enter your keyword in the Enter Main Keyword and the permalink field will
auto-populate as you type (note that keywords do not include numbers or special
characters). Leave the Template Folder field blank, click the Project Options button
once so that it shows as Repeat Project then add your redirection url shown at #4
and click Next.
2. List of Keywords
Here paste your list of keywords, one per line (again note that keywords do not
contain special characters). It’s best not to go overboard with the number of
keywords you add here as there will be a page created for each keyword on the
Google Site (5-7 is a good number).
3. Article
Next paste your article into the Article box. Before we do the spinning step, if
there are any words in your article that you don’t want changed/want to always be
in the article post, then add them into the Protected field and separate each
word/group of words by a comma (use a comma to separate, not add to the end
of all the words in the Protected list). Next click the Make spintax button and wait
for the software to contact the 3rd party spin site and update the article with
spintax code. When the process has completed, you’ll notice a number of spin
characters in the article which are { | } characters. Once you notice those
characters click Next. (Note – You only need to do the Make spintax step the first
time you setup any new project. If you re-run the project later and it already has
the spintax code in the project article just click Next on this tab).
4. HTML Additional
The HTML box is to allow you to add extra formatted html (links, GMB embeds
etc) which will be explained in the tutorials but for now just leave this blank
and click Next.
5. Google Main Site
Next, you’ll add your Google account to use for the main site (the software will
create 2 interlinked Google Sites during the run which are a Main and a Helper
site and as noted earlier you need a different Google account for each). Under
the Add New Account heading in the Google login field add your google
account user which will end in @gmail.com (this must have the @gmail.com at
the end, not just the username portion) then add the password in the second
field and click the Add new Google account button. Once the account appears
in the top list click on it once to select it then click the Next button to move on.
6. Google Helper Site
Here add your Google account for the Helper site in the same way as we did for
the main site then select it in the list and click Next
7. Site Options
On the site options tab first click on the Browse button, navigate to your image
folder and select an image inside the folder. In the Google Map field add your
city, state and Country separated by commas. (If you’re not targeting a
City/State just enter a Country name here. E.g. United States or USA). In the
Main site url field you can add a different website that you own or just enter
the same url as you entered in the redirect url. Then in the Youtube video URL’s
field paste your Youtube video urls which you found in the preparation step
then click Next.
Start Job
Now everything is ready so go ahead and click the Start work button and Trust
Jacker will begin creating your project. Note that the software does an
enormous amount of work in each project, creating 2 interlinked Google sites
with pages of content for your keywords etc, so it will take a bit of time to
create all these then once complete it will pop up a pdf report listing all the
site links etc.
Once the project completes it will pop up a pdf with all the links to the created
Google sites and subpages for your reference.
Be sure to visit the forum https://petestrafficsuite.com/forum.php regularly to
stay up to date with what’s happening and join in the discussion or post any
questions you might have relating to strategies etc.
To your success.