what is international standard organization

8/10/2019 What is International Standard Organization

1/18

What is International Standard Organization(I.S.O)?

ISO (International Organization for Standardization) is an independent, non-governmental membership organization and the world's largest developer of

voluntary International Standards.

Why is international standard use?

International standards may be used either by direct application or by a process of modifying an international standard to suit local conditions. Theadoption of international standards results in the creation of equivalent, national standards that are substantially the same as international standards intechnical content, but may have (i) editorial differences as to appearance, use of symbols and measurement units, substitution of a point for a comma asthe decimal marker, and (ii) differences resulting from conflicts in governmenta l regulations or industry-specific requirements caused by f undamentalclimatic, geographical, technological, or infrastructural factors, or the stringency of safety requirements that a given stan dard authority considersappropriate.

International standards are one way of overcoming technical barriers in international commerce caused by differences among technical regulations andstandards developed independently and separately by each nation, national standards organization, or company. Technical barri ers arise when differentgroups come together, each with a large user base, doing some well established thing that between them is mutually incompatible. Establishing

international standards is one way of preventing or overcoming this problem.

List of International Organization for Standardization standards

ISO 1 ISO 99

ISO 1: 2002 Geometrical Product Specifications (GPS) Standard reference temperature for geometrical product specification andverification

ISO 2: 1973 Textiles Designation of the direction of twist in yarns and related products ISO 3: 1973 Preferred numbers Series of preferred numbers ISO 4: 1997 Information and documentation Rules for the abbreviation of title words and titles of publications ISO 5 Photography and graphic technology Density measurements

o ISO 5-1:2009 Geometry and functional notationo ISO 5-2:2009 Geometric conditions for transmittance densityo ISO 5-3:2009 Spectral conditionso ISO 5-4:2009 Geometric conditions for reflection density

ISO 6: 1993 Photography Black-and-white pictorial still camera negative film/process systems Determination of ISO speed ISO 7 Pipe threads where pressure-tight joints are made on the threads

o ISO 7-1:1994 Dimensions, tolerances and designationo ISO 7-2:2000 Verification by means of limit gauges

ISO 8:1977 Documentation Presentation of periodicals ISO 9: 1995 Information and documentation Transliteration of Cyrillic characters i nto Latin characters Slavic and non-Slavic

languages ISO 11:1987 Aircraft Ground pressure testing connections for pressure cabins ISO 12:1987 Aerospace Pipelines Identification ISO 14:1982 Straight-sided splines for cylindrical shafts with internal centering Dimensions, tolerances and verification ISO 15:2011 Radial bearings -- Boundary dimensions, general plan ISO 16: 1975 Acoustics Standard tuning frequency (Standard musical pitch) ISO 17:1973 Guide to the use of preferred numbers and of series of preferred numbers ISO 18:1981 Documentation Contents list of periodicals

ISO 21: 1985 Shipbuilding Inland navigation Cable-lifters for stud-link anchor chains ISO 22:1991 Belt drives Flat transmission belts and corresponding pulleys Dimensions and tolerances ISO 23:1993 Cinematography -- Camera usage of 35 mm motion-picture film -- Specifications ISO 25:1994 Cinematography -- Camera usage of 16 mm motion-picture film -- Specifications ISO 26:1993 Cinematography -- Projector usage of 16 mm motion-picture films for direct front projection -- Specifications ISO 28:1976 Cinematography -- Camera usage of 8 mm Type R motion-picture film -- Specifications ISO 29:1980 Cinematography -- Projector usage of 8 mm Type R silent motion-picture film for direct front projection -- Specifications

[Withdrawn without replacement] ISO 31 Quantities and units [withdrawn: replaced with ISO/IEC 80000] ISO 32:1977 Gas cylinders for medical use -- Marking for identification of content ISO 34

o ISO 34-1:2010 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 1: Trouser, angle and crescenttest pieces

o ISO 34-2:2011 Rubber, vulcanized or thermoplastic -- Determination of tear strength -- Part 2: Small (Delft) test pieces ISO 35:2004 Natural rubber latex concentrate -- Determination of mechanical stability ISO 36:2011 Rubber, vulcanized or thermoplastic -- Determination of adhesion to textile fabrics
http://www.iso.org/iso/home/standards.htmhttp://www.iso.org/iso/home/standards.htmhttp://en.wikipedia.org/wiki/Regulationhttp://en.wikipedia.org/wiki/ISO_1http://en.wikipedia.org/wiki/ISO_2http://en.wikipedia.org/wiki/ISO_3http://en.wikipedia.org/wiki/ISO_4http://en.wikipedia.org/wiki/ISO_5http://en.wikipedia.org/wiki/ISO_6http://en.wikipedia.org/wiki/ISO_7http://en.wikipedia.org/wiki/ISO_9http://en.wikipedia.org/wiki/Cyrillic_charactershttp://en.wikipedia.org/wiki/Latin_charactershttp://en.wikipedia.org/wiki/ISO_16http://en.wikipedia.org/wiki/Musical_pitchhttp://en.wikipedia.org/w/index.php?title=ISO_21&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_31http://en.wikipedia.org/wiki/ISO_31http://en.wikipedia.org/w/index.php?title=ISO_21&action=edit&redlink=1http://en.wikipedia.org/wiki/Musical_pitchhttp://en.wikipedia.org/wiki/ISO_16http://en.wikipedia.org/wiki/Latin_charactershttp://en.wikipedia.org/wiki/Cyrillic_charactershttp://en.wikipedia.org/wiki/ISO_9http://en.wikipedia.org/wiki/ISO_7http://en.wikipedia.org/wiki/ISO_6http://en.wikipedia.org/wiki/ISO_5http://en.wikipedia.org/wiki/ISO_4http://en.wikipedia.org/wiki/ISO_3http://en.wikipedia.org/wiki/ISO_2http://en.wikipedia.org/wiki/ISO_1http://en.wikipedia.org/wiki/Regulationhttp://www.iso.org/iso/home/standards.htmhttp://www.iso.org/iso/home/standards.htm


2/18

ISO 37:2011 Rubber, vulcanized or thermoplastic Determination of tensile stress-strain properties ISO 41:1980 Shipbuilding -- Inland vessels -- Covers for deck openings for pumps [withdrawn without replacement] ISO 43:1976 Aircraft -- Jacking pads ISO 44:1975 Aerospace -- Lever-operated, two-position, ON/OFF switches -- Directions of operation ISO 45:1990 Aircraft -- Pressure refuelling connections ISO 46:1973 Aircraft -- Fuel nozzle grounding plugs and sockets

ISO 48:2010 Rubber, vulcanized or thermoplastic -- Determination of hardness (hardness between 10 IRHD and 100 IRHD) ISO 49:1994 Malleable cast iron fittings threaded to ISO 7-1 ISO 50:1977 Metal pipes -- Steel sockets screwed according to ISO 7 [Withdrawn without replacement] ISO 53:1998 Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile ISO 54:1996 Cylindrical gears for general engineering and for heavy engineering -- Modules ISO 55:1977 Seedlac -- Specification [Withdrawn without replacement] ISO 57:1975 Bleached lac -- Specification [Withdrawn without replacement] ISO 60:1977 Plastics -- Determination of apparent density of material that can be poured from a specified funnel ISO 61:1976 Plastics -- Determination of apparent density of moulding material that cannot be poured from a specified funnel ISO 62:2008 Plastics -- Determination of water absorption ISO 63:1975 Flat transmission belts -- Lengths [Withdrawn: Replaced with ISO 22] ISO 65:1981 Carbon steel tubes suitable for screwing in accordance with ISO 7-1 ISO 67:1981 Muscovite mica blocks, thins and films -- Grading by size [Withdrawn without replacement] ISO 68 ISO general-purpose screw threads Basic profile

o ISO 68-1: 1998 Metric screw threadso ISO 68-2:1998 Inch screw threads

ISO 69:1998 Cinematography -- 16 mm motion-picture and magnetic film -- Cutting and perforating dimensions ISO 70:1981 Cinematography -- 35 mm negative photographic sound record on 35 mm motion-picture film -- Position and maximum

width dimensions ISO 71:1977 Cinematography -- 16 mm negative photographic sound record on 16 mm, 35/16 mm and 35/32 mm motion-picture film --

Positions and dimensions ISO 74:1976 Cinematography -- Image area produced by camera aperture and maximum projectable image area on 8 mm Type R motion-

picture film -- Positions and dimensions ISO 75 Plastics -- Determination of temperature of deflection under load

o ISO 75-1:2013 Plastics -- Determination of temperature of deflection under load -- Part 1: General test methodo ISO 75-2:2013 Plastics -- Determination of temperature of deflection under load -- Part 2: Plastics and eboniteo ISO 75-3:2004 Plastics -- Determination of temperature of deflection under load -- Part 3: High-strength thermosetting

laminates and long-fibre-reinforced plastics

ISO 76:2006 Rolling bearings -- Static load ratings ISO 78 Chemistry Layouts for standards

o ISO 78-2:1999 Chemistry -- Layouts for standards -- Part 2: Methods of chemical analysiso ISO 78-3:1983 Chemistry -- Layouts for standards -- Part 3: Standard for molecular absorption spectrometryo ISO 78-4:1983 Layouts for standards -- Part 4: Standard for atomic absorption spectrometric analysis

ISO 82:1974 Steel -- Tensile testing [Withdrawn: replaced with ISO 6892-1] ISO 83:1976 Steel -- Charpy impact test (U-notch) [Withdrawn: replaced with ISO 148-1] ISO 86:1974 Steel -- Tensile testing of sheet and strip less than 3 mm and not less than 0,5 mm thick [Withdrawn: replaced with ISO 6892-

1] ISO 89:1974 Steel -- Tensile testing of wire [Withdrawn: replaced with ISO 6892-1] ISO 90 Light gauge metal containers -- Definitions and determination of dimensions and capacities

o ISO 90-1:1997 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 1: Open-topcans

o ISO 90-2:1997 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 2: Generaluse containers

o ISO 90-3:2000 Light gauge metal containers -- Definitions and determination of dimensions and capacities -- Part 3: Aerosolcans

ISO 91 Petroleum measurement tableso ISO 91-1:1992 Petroleum measurement tables -- Part 1: Tables based on reference temperatures of 15 degrees C and 60

degrees Fo ISO 91-2:1991 Petroleum measurement tables -- Part 2: Tables based on a reference temperature of 20 degrees C

ISO 92:1976 Textile machinery and accessories -- Spinning machinery -- Definition of side (left or right) ISO 93 Textile machinery and accessories -- Cylindrical sliver cans

o ISO 93-1:2006 Textile machinery and accessories -- Cylindrical sliver cans -- Part 1: Main dimensionso ISO 93-2:2006 Textile machinery and accessories -- Cylindrical sliver cans -- Part 2: Spring bottoms

ISO 94:1982 Textile machinery and accessories -- Spindle gauges for ring-spinning and ring-doubling frames ISO 96 Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting frames

o ISO 96-1:2009 Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting frames -- Part 1:Flange rings T and SF and their travellers

o ISO 96-2:2009 Textile machinery and accessories -- Rings and travellers for ring spinning and ring twisting frames -- Part 2:HZ- and J-rings and their travellers ISO 97:1975 Textile machinery and accessories -- Rings for spinning, doubling and twisting for ear-shaped travellers
http://en.wikipedia.org/wiki/ISO_68-1http://en.wikipedia.org/wiki/ISO_68-1


3/18

ISO 98:2001 Textile machinery and accessories -- Spinning preparatory and spinning machinery -- Main dimensions of coverings for toprollers

ISO 100 ISO 199

ISO 100:1984 Pulleys for flat transmission belts -- Crowns [Withdrawn: replaced with ISO 22]

ISO 102:1990 Aircraft -- Gravity filling orifices ISO 104:2002 Rolling bearings -- Thrust bearings -- Boundary dimensions, general plan ISO 105 Textiles Tests for colour fastness

o ISO 105-A01:2010 Part A01: General principles of testingo ISO 105-A02:1993 Part A02: Grey scale for assessing change in colouro ISO 105-A03:1993 Part A03: Grey scale for assessing stainingo ISO 105-A04:1989 Part A04: Method for the instrumental assessment of the degree of staining of adjacent fabricso ISO 105-A05:1996 Part A05: Instrumental assessment of change in colour for determination of grey scale ratingo ISO 105-A06:1995 Part A06: Instrumental determination of 1/1 standard depth of colouro ISO 105-A08:2001 Part A08: Vocabulary used in colour measuremento ISO 105-A11:2012 Part A11: Determination of colour fastness grades by digital imaging techniqueso ISO 105-B01:1994 Part B01: Colour fastness to light: Daylighto ISO 105-B02:2013 Part B02: Colour fastness to artificial light: Xenon arc f ading lamp testo ISO 105-B03:1994 Part B03: Colour fastness to weathering: Outdoor exposureo ISO 105-B04:1994 Part B04: Colour fastness to artificial weathering: Xenon arc fading lamp testo ISO 105-B05:1993 Part B05: Detection and assessment of photochromismo ISO 105-B06:1998 Part B06: Colour fastness and ageing to artificial light at high temperatures: Xenon arc fading lamp testo ISO 105-B07:2009 Part B07: Colour fastness to light of textiles wetted with artificial perspirationo ISO 105-B08:1995 Part B08: Quality control of blue wool reference materials 1 to 7o ISO 105-B10:2011 Part B10: Artificial weathering -- Exposure to filtered xenon-arc radiationo ISO 105-C06:2010 Part C06: Colour fastness to domestic and commercial launderingo ISO 105-C07:1999 Part C07: Colour fastness to wet scrubbing of pigment printed textileso ISO 105-C08:2010 Part C08: Colour fastness to domestic and commercial laundering using a non-phosphate reference

detergent incorporating a low-temperature bleach activatoro ISO 105-C09:2001 Part C09: Colour fastness to domestic and commercial laundering -- Oxidative bleach response using a non-

phosphate reference detergent incorporating a low temperature bleach activatoro ISO 105-C10:2006 Part C10: Colour fastness to washing with soap or soap and sodao ISO 105-C12:2004 Part C12: Colour fastness to industrial launderingo ISO 105-D01:2010 Part D01: Colour fastness to drycleaning using perchloroethylene solvento ISO 105-D02:1993 Part D02: Colour fastness to rubbing: Organic solventso ISO 105-E01:2013 Part E01: Colour fastness to watero ISO 105-E02:2013 Part E02: Colour fastness to sea watero ISO 105-E03:2010 Part E03: Colour fastness to chlorinated water (swimming-pool water)o ISO 105-E04:2013 Part E04: Colour fastness to perspirationo ISO 105-E05:2010 Part E05: Colour fastness to spotting: Acido ISO 105-E06:2006 Part E06: Colour fastness to spotting: Alkalio ISO 105-E07:2010 Part E07: Colour fastness to spotting: Watero ISO 105-E08:1994 Part E08: Colour fastness to hot watero ISO 105-E09:2010 Part E09: Colour fastness to pottingo ISO 105-E10:1994 Part E10: Colour fastness to decatizingo ISO 105-E11:1994 Part E11: Colour fastness to steamingo ISO 105-E12:2010 Part E12: Colour fastness to milling: Alkaline millingo ISO 105-E13:1994 Part E13: Colour fastness to acid-felting: Severeo ISO 105-E14:1994 Part E14: Colour fastness to acid-felting: Mildo ISO 105-E16:2006 Part E16: Colour fastness to water spotting on upholstery fabricso ISO 105-F01:2001 Part F01: Specification for wool adjacent fabrico ISO 105-F02:2009 Part F02: Specification for cotton and viscose adjacent fabricso ISO 105-F03:2001 Part F03: Specification for polyamide adjacent fabrico ISO 105-F04:2001 Part F04: Specification for polyester adjacent fabrico ISO 105-F05:2001 Part F05: Specification for acrylic adjacent fabrico ISO 105-F06:2000 Part F06: Specification for silk adjacent fabrico ISO 105-F07:2001 Part F07: Specification for secondary acetate adjacent fabrico ISO 105-F09:2009 Part F09: Specification for cotton rubbing clotho ISO 105-F10:1989 Part F10: Specification for adjacent fabric: Multifibreo ISO 105-G01:1993 Part G01: Colour fastness to nitrogen oxideso ISO 105-G02:1993 Part G02: Colour fastness to burnt-gas fumeso ISO 105-G03:1993 Part G03: Colour fastness to ozone in the atmosphereo ISO 105-G04:1989 Part G04: Colour fastness to oxides of nitrogen in the atmosphere at high humiditieso ISO 105-J01:1997 Part J01: General principles for measurement of surface colouro ISO 105-J02:1997 Part J02: I nstrumental assessment of relative whitenesso ISO 105-J03:2009 Part J03: Calculation of colour differenceso ISO 105-J05:2007 Part J05: Method for the instrumental assessment of the colour inconstancy of a specimen with change in

illuminant (CMCCON02)o ISO 105-N01:1993 Part N01: Colour fastness to bleaching: Hypochlorite


4/18

o ISO 105-N02:1993 Part N02: Colour fastness to bleaching: Peroxideo ISO 105-N03:1993 Part N03: Colour fastness to bleaching: Sodium chlorite (mild)o ISO 105-N04:1993 Part N04: Colour fastness to bleaching: Sodium chlorite (severe)o ISO 105-N05:1993 Part N05: Colour fastness to stovingo ISO 105-P01:1993 Part P01: Colour fastness to dry heat (excluding pressing)o ISO 105-P02:2002 Part P02: Colour fastness to pleating: Steam pleatingo ISO 105-S01:1993 Part S01: Colour fastness to vulcanization: Hot airo ISO 105-S02:1993 Part S02: Colour fastness to vulcanization: Sulfur monochlorideo ISO 105-S03:1993 Part S03: Colour fastness to vulcanization: Open steamo ISO 105-X01:1993 Part X01: Colour fastness to carbonizing: Aluminium chlorideo ISO 105-X02:1993 Part X02: Colour fastness to carbonizing: Sulfuric acido ISO 105-X04:1994 Part X04: Colour fastness to mercerizingo ISO 105-X05:1994 Part X05: Colour fastness to organic solventso ISO 105-X06:1994 Part X06: Colour fastness to soda boilingo ISO 105-X07:1994 Part X07: Colour fastness to cross-dyeing: Woolo ISO 105-X08:1994 Part X08: Colour fastness to degummingo ISO 105-X09:1993 Part X09: Colour fastness to formaldehydeo ISO 105-X10:1993 Part X10: Assessment of migration of textile colours into polyvinyl chloride coatingso ISO 105-X11:1994 Part X11: Colour fastness to hot pressingo ISO 105-X12:2001 Part X12: Colour fastness to rubbingo ISO 105-X13:1994 Part X13: Colour fastness of wool dyes to processes using chemical means for creasing, pleating and settingo ISO 105-X14:1994 Part X14: Colour fastness to acid chlorination of wool: Sodium dichloroisocyanurateo

ISO 105-X16:2001 Part X16: Colour fastness to rubbing -- Small areaso ISO 105-X18:2007 Part X18: Assessment of the potential to phenolic yellowing of materialso ISO 105-Z01:1993 Part Z01: Colour fastness to metals in the dye-bath: Chromium saltso ISO 105-Z02:1993 Part Z02: Colour fastness to metals in the dye-bath: Iron and coppero ISO 105-Z03:1996 Part Z03: Intercompatibility of basic dyes for acrylic fibreso ISO 105-Z04:1995 Part Z04: Dispersibility of disperse dyeso ISO 105-Z05:1996 Part Z05: Determination of the dusting behaviour of dyeso ISO 105-Z06:1998 Part Z06: Evaluation of dye and pigment migrationo ISO 105-Z07:1995 Part Z07: Determination of application solubility and solution stability of water-soluble dyeso ISO 105-Z08:1995 Part Z08: Determination of solubility and solution stability of reactive dyes in the presence of electrolyteso ISO 105-Z09:1995 Part Z09: Determination of cold water solubility of water-soluble dyeso ISO 105-Z10:1997 Part Z10: Determination of relative colour strength of dyes in solutiono ISO 105-Z11:1998 Part Z11: Evaluation of speckiness of colorant dispersions

ISO 108:1976 Textile machinery and accessories -- Weaving looms -- Definition of left and right sides ISO 109:1982 Textile machinery -- Working widths of weaving machines ISO 110:1978 Textile machinery and accessories -- Cones for yarn winding (cross wound) -- Half angle of the cone 9 degrees 15'[Withdrawn without replacement] ISO 111:1978 Textile machinery and accessories -- Cones for yarn winding (cross wound) -- Half angle of the cone 4 degrees 20'

[Withdrawn: Replaced with ISO 8489-3] ISO 112:1983 Textile machinery and accessories -- Cones for yarn winding (cross wound) -- Half angle of the cone 3 degrees 30'

[Withdrawn: Replaced with ISO 8489-2] ISO 113:2010 Rolling bearings -- Plummer block housings -- Boundary dimensions ISO 114:1980 99.8 Unalloyed magnesium ingots -- Chemical composition [Withdrawn: Replaced by ISO 8287] ISO 115:2003 Unalloyed aluminium ingots for remelting -- Classification and composition ISO 119:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free phenols -- Iodometric method ISO 120:1977 Plastics -- Phenol-formaldehyde mouldings -- Determination of free ammonia and ammonium compounds -- Colorimetric

comparison method ISO 121:1980 Magnesium-aluminium-zinc alloy ingots and alloy castings -- Chemical composition and mechanical properties of sand cast

reference test bars [Withdrawn: replaced by ISO 16220]

ISO 123:2001 Rubber latex -- Sampling ISO 124:2011 Latex, rubber -- Determination of total solids content ISO 125:2011 Natural rubber latex concentrate -- Determination of alkalinity ISO 126:2005 Natural rubber latex concentrate -- Determination of dry rubber content ISO 127:2012 Rubber, natural latex concentrate -- Determination of KOH number ISO 128

o ISO 128-1:2003 Technical drawings -- General principles of presentation -- Part 1: Introduction and indexo ISO 128-15:2013 Technical product documentation (TPD) -- General principles of presentation -- Part 15: Presentation of

shipbuilding drawingso ISO 128-20:1996 Technical drawings -- General principles of presentation -- Part 20: Basic conventions for lineso ISO 128-21:1997 Technical drawings -- General principles of presentation -- Part 21: Preparation of lines by CAD systemso ISO 128-22:1999 Technical drawings -- General principles of presentation -- Part 22: Basic conventions and applications for

leader lines and reference lineso ISO 128-23:1999 Technical drawings -- General principles of presentation -- Part 23: Lines on construction drawingso ISO 128-24:1999 Technical drawings -- General principles of presentation -- Part 24: Lines on mechanical engineering

drawingso ISO 128-25:1999 Technical drawings -- General principles of presentation -- Part 25: Lines on shipbuilding drawingso ISO 128-30:2001 Technical drawings -- General principles of presentation -- Part 30: Basic conventions for views
http://en.wikipedia.org/wiki/ISO_128http://en.wikipedia.org/wiki/ISO_128


5/18


6/18

ISO 261 ISO general purpose metric screw threads General plan ISO 262 ISO general purpose metric screw threads Selected sizes for screws, bolts and nuts ISO 286-1 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 1: Basis of tolerances,

deviations and fits ISO 286-2 Geometrical product specifications (GPS) ISO code system for tolerances on linear sizes Part 2: Tables of standard tolerance

classes and limit deviations for holes and shafts ISO 361 Basic ionizing radiation symbol ISO 500 Agricultural tractors Rear-mounted power take-off types 1, 2 and 3 ISO 518: 2006 Photography Camera accessory shoes, with and without electrical contacts, for photoflash lamps and electronic photoflash

units Specification ISO 519: 1992 Photography Hand-held cameras Flash-connector dimensions ISO 639 Codes for the representation of names of languages

o ISO 639-1 Alpha-2 codeo ISO 639-2 Alpha-3 codeo ISO 639-3 Alpha-3 code for comprehensive coverage of languageso ISO 639-4 General principles of coding of the representation of names of languages and related entities, and application

guidelineso ISO 639-5 Alpha-3 code for language families and groupso ISO 639-6 Alpha-4 code for comprehensive coverage of language variants

ISO/IEC 646 Information technology ISO 7-bit coded character set for information interchange ISO 657 Hot-rolled steel sections

ISO 668 Series 1 freight containers Classification, dimensions and ratings ISO 690 Information and documentation Guidelines for bibliographic references and citations to information resources ISO 704 Terminology work Principles and methods ISO 732 Photography 120-size and 220-size films Dimensions ISO 764 Horology Magnetic resistant watches ISO 760:1978 Determination of water - Karl Fischer method (General method) ISO 787 General methods of test for pigments and extenders

o ISO 787-9:1981 Determination of pH value of an aqueous suspension ISO 838 Paper Holes for general filing purposes Specifications ISO 843: 1997 Information and documentation Conversion of Greek characters into Latin characters ISO 860 Terminology work Harmonization of concepts and terms ISO 898 Mechanical properties of fasteners made of carbon steel and alloy stee l [Note 3]

o ISO 898-1 Bolts, screws and studs with specified property classes Coarse thread and fine pitch threado

ISO 898-2 Nuts with specified proof load values

Coarse threado ISO 898-5 Set screws and similar threaded fasteners not under tensile stresseso ISO 898-6 Nuts with specified proof load values Fine pitch threado ISO 898-7 Torsional test and minimum torques for bolts and screws with nominal diameters 1 mm to 10 mm

ISO 965 ISO general purpose metric screw threads Toleranceso ISO 965-1 Principles and basic datao ISO 965-2 Limits of sizes for general purpose external and internal screw threads Medium qualityo ISO 965-3 Deviations for constructional screw threadso ISO 965-4 Limits of sizes for hot-dip galvanized external screw threads to mate with internal screw threads tapped with

tolerance position H or G after galvanizingo ISO 965-5 Limits of sizes for internal screw threads to mate with hot-dip galvanized external screw threads with maximum size

of tolerance position h before galvanizing ISO 999 Information and documentation Guidelines for the content, organization, and presentation of indexes

ISO 1000 ISO 4999

ISO 1000 SI units and recommendations for the use of their multiples and of certain other units [withdrawn 2009-11-17] ISO 1004 Information processing Magnetic ink character recognition Print specifications ISO 1007 Photography 135-size film and magazine Specifications ISO 1101 Geometrical Product Specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out ISO 1222 Photography Tripod connections ISO 1268 Fibre-reinforced plastics Methods of producing test plates ISO 1402 Rubber and plastics hoses and hose assemblies - Hydrostatic testing ISO/IEC 1539 Information technology Programming languages Fortran ISO 1629 Rubber and latices Nomenclature ISO 1663 Rigid cellular plastics Determination of water vapour transmission properties ISO 1745 I nformation processing Basic mode control procedures for data communication systems ISO 1750 Pesticides and other agrochemicals Common names ISO 1928 Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific

value
http://en.wikipedia.org/wiki/ISO_261http://en.wikipedia.org/wiki/ISO_262http://en.wikipedia.org/w/index.php?title=ISO_286-1&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_286-2&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_361http://en.wikipedia.org/wiki/ISO_500http://en.wikipedia.org/wiki/ISO_518http://en.wikipedia.org/wiki/ISO_519http://en.wikipedia.org/wiki/ISO_639http://en.wikipedia.org/wiki/ISO_639-1http://en.wikipedia.org/wiki/ISO_639-2http://en.wikipedia.org/wiki/ISO_639-3http://en.wikipedia.org/wiki/ISO_639-5http://en.wikipedia.org/wiki/ISO_639-6http://en.wikipedia.org/wiki/ISO/IEC_646http://en.wikipedia.org/wiki/ISO_657http://en.wikipedia.org/wiki/ISO_668http://en.wikipedia.org/wiki/Freight_containerhttp://en.wikipedia.org/wiki/ISO_690http://en.wikipedia.org/wiki/ISO_704http://en.wikipedia.org/wiki/ISO_732http://en.wikipedia.org/wiki/Antimagnetic_watchhttp://en.wikipedia.org/wiki/ISO_838http://en.wikipedia.org/wiki/ISO_843http://en.wikipedia.org/wiki/Latin_charactershttp://en.wikipedia.org/wiki/ISO_860http://en.wikipedia.org/wiki/ISO_898http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/ISO_965http://en.wikipedia.org/wiki/Toleranceshttp://en.wikipedia.org/wiki/ISO_999http://en.wikipedia.org/wiki/ISO_1000http://en.wikipedia.org/wiki/SIhttp://en.wikipedia.org/wiki/Magnetic_ink_character_recognitionhttp://en.wikipedia.org/wiki/135_filmhttp://en.wikipedia.org/w/index.php?title=ISO_1101&action=edit&redlink=1http://en.wikipedia.org/wiki/Tripod_%28photography%29http://en.wikipedia.org/wiki/Fortranhttp://en.wikipedia.org/wiki/ISO_1629http://en.wikipedia.org/wiki/ISO_1745http://en.wikipedia.org/wiki/ISO_1750http://en.wikipedia.org/wiki/ISO_1750http://en.wikipedia.org/wiki/ISO_1745http://en.wikipedia.org/wiki/ISO_1629http://en.wikipedia.org/wiki/Fortranhttp://en.wikipedia.org/wiki/Tripod_%28photography%29http://en.wikipedia.org/w/index.php?title=ISO_1101&action=edit&redlink=1http://en.wikipedia.org/wiki/135_filmhttp://en.wikipedia.org/wiki/Magnetic_ink_character_recognitionhttp://en.wikipedia.org/wiki/SIhttp://en.wikipedia.org/wiki/ISO_1000http://en.wikipedia.org/wiki/ISO_999http://en.wikipedia.org/wiki/Toleranceshttp://en.wikipedia.org/wiki/ISO_965http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/ISO_898http://en.wikipedia.org/wiki/ISO_860http://en.wikipedia.org/wiki/Latin_charactershttp://en.wikipedia.org/wiki/ISO_843http://en.wikipedia.org/wiki/ISO_838http://en.wikipedia.org/wiki/Antimagnetic_watchhttp://en.wikipedia.org/wiki/ISO_732http://en.wikipedia.org/wiki/ISO_704http://en.wikipedia.org/wiki/ISO_690http://en.wikipedia.org/wiki/Freight_containerhttp://en.wikipedia.org/wiki/ISO_668http://en.wikipedia.org/wiki/ISO_657http://en.wikipedia.org/wiki/ISO/IEC_646http://en.wikipedia.org/wiki/ISO_639-6http://en.wikipedia.org/wiki/ISO_639-5http://en.wikipedia.org/wiki/ISO_639-3http://en.wikipedia.org/wiki/ISO_639-2http://en.wikipedia.org/wiki/ISO_639-1http://en.wikipedia.org/wiki/ISO_639http://en.wikipedia.org/wiki/ISO_519http://en.wikipedia.org/wiki/ISO_518http://en.wikipedia.org/wiki/ISO_500http://en.wikipedia.org/wiki/ISO_361http://en.wikipedia.org/w/index.php?title=ISO_286-2&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_286-1&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_262http://en.wikipedia.org/wiki/ISO_261


7/18

ISO/IEC 2022 Information technology Character code structure and extension techniques ISO 2108 Information and documentation International standard book number (ISBN) ISO 2145 Documentation Numbering of divisions and subdivisions in written documents ISO 2162 Technical product documentation Springs

o ISO 2162-1 Simplified representationo ISO 2162-2 Presentation of data for cylindrical helical compression springs

ISO 2171 Cereals, pulses and by- products

Determination of ash yield by incineration ISO 2240: 2003 Photography Colour reversal camera films Determination of ISO speed

ISO 2533 Standard Atmosphere ISO 2692 Geometrical product specifications (GPS) Geometrical tolerancing Maximum material requirement (MMR), least material

requirement (LMR) and reciprocity requirement (RPR) ISO 2709 I nformation and documentation Format for information exchange ISO 2768 General tolerances

o ISO 2768-1 Tolerances for linear and angular dimensions without individual tolerance indicationso ISO 2768-2 Geometrical tolerances for features without individual tolerance indications

ISO 2852 Stainless steel clamp pipe couplings for the food industry ISO 3002 Basic quantities in cutting and grinding ISO 3082 I ron ores Sampling and sample preparation procedures ISO 3098 Technical product documentation Lettering ISO 3103 Tea Preparation of liquor for use in sensory tests ISO 3166 Codes for the representation of names of countries and their subdivisions

o ISO 3166-1 Country codeso ISO 3166-2 Country subdivision codeo ISO 3166-3 Code for formerly used names of countries

ISO 3297 Information and documentation International standard serial number (ISSN) ISO 3394 Dimensions of rigid rectangular packages Transport packages ISO 3506 Mechanical properties of corrosion-resistan t stainless steel fasteners ISO 3536 Road vehicles Safety glazing materials Vocabulary ISO 3537 Road vehicles Safety glazing materials Mechanical tests ISO 3538 Road vehicles Safety glazing materials Test methods for optical properties ISO 3601 Fluid power systems O-rings

o ISO 3601-1 Inside diameters, cross-sections, tolerances and designation codeso ISO 3601-2 Housing dimensions for general applicationso ISO 3601-3 Quality acceptance criteriao ISO 3601-4 Anti-extrusion rings (back-up rings)o ISO 3601-5 Suitability of elastomeric materials for industrial applications

ISO 3602 Documentation Romanization of Japanese (kana s cript) ISO 3632 Spices Saffron ( Crocus sativus L. )[Note 3] ISO 3635: 1981 Size designation of clothes Definitions and body measurement procedure ISO 3676 Packaging Unit load sizes Dimensions ISO 3864 Graphical symbols Safety colours and safety signs ISO 3901 I nformation and documentation International Standard Recording Code (ISRC) ISO 3977 Gas turbines Procurement ISO 4074 Natural latex rubber condoms Requirements and test methods ISO 4157 Construction drawings Designation systems

o ISO 4157-1 Buildings and part of buildingso ISO 4157-2 Room names and numberso ISO 4157-3 Room identifiers ISO 4165 Road vehicles Electrical connections Double-pole connection

ISO 4179 Ductile iron pipes and fittings for pressure and non-pressure pipelines Cement mortar lining ISO 4217 Codes for the representation o f currencies and funds ISO 4314 Surface active agents Determination of free alkalinity or free acidity Titrimetric method ISO 4578 Adhesives Determination of peel resistance of high-strength adhesive bonds Floating-roller method ISO 4582 Plastics Determination of changes in colour and variations in properties after exposure to daylight under glass, natural

weathering or laboratory light sources ISO 4587 Adhesives Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies ISO 4628 Paints and varnishes Evaluation of degradation of coatings Designation of quantity and size of defects, and of intensity of

uniform changes in appearanceo ISO 4628-1 General introduction and designation systemo ISO 4628-2 Assessment of degree of blisteringo ISO 4628-3 Assessment of degree of rustingo ISO 4628-4 Assessment of degree of crackingo ISO 4628-5 Assessment of degree of flakingo ISO 4628-6 Assessment of degree of chalking by tape method
http://en.wikipedia.org/wiki/ISO/IEC_2022http://en.wikipedia.org/wiki/International_standard_book_numberhttp://en.wikipedia.org/wiki/ISO_2145http://en.wikipedia.org/wiki/ISO_2162http://en.wikipedia.org/wiki/ISO_2171http://en.wikipedia.org/wiki/ISO_2240http://en.wikipedia.org/wiki/ISO_2533http://en.wikipedia.org/w/index.php?title=ISO_2692&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_2709http://en.wikipedia.org/wiki/ISO_2852http://en.wikipedia.org/w/index.php?title=ISO_3002&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_3082http://en.wikipedia.org/wiki/ISO_3098http://en.wikipedia.org/wiki/ISO_3103http://en.wikipedia.org/wiki/Teahttp://en.wikipedia.org/wiki/ISO_3166http://en.wikipedia.org/wiki/ISO_3166-1http://en.wikipedia.org/wiki/ISO_3166-2http://en.wikipedia.org/wiki/ISO_3166-3http://en.wikipedia.org/wiki/International_standard_serial_numberhttp://en.wikipedia.org/wiki/ISO_3394http://en.wikipedia.org/wiki/ISO_3506http://en.wikipedia.org/wiki/Stainless_steelhttp://en.wikipedia.org/wiki/ISO_3536http://en.wikipedia.org/wiki/Windshieldhttp://en.wikipedia.org/wiki/ISO_3537http://en.wikipedia.org/wiki/Windshieldhttp://en.wikipedia.org/wiki/ISO_3538http://en.wikipedia.org/wiki/Windshieldhttp://en.wikipedia.org/wiki/ISO_3601http://en.wikipedia.org/wiki/O-ringhttp://en.wikipedia.org/wiki/ISO_3602http://en.wikipedia.org/wiki/Kanahttp://en.wikipedia.org/w/index.php?title=ISO_3632&action=edit&redlink=1http://en.wikipedia.org/wiki/Saffronhttp://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/w/index.php?title=ISO_3635&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_3676&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_3864http://en.wikipedia.org/wiki/ISO_3901http://en.wikipedia.org/wiki/ISO_3977http://en.wikipedia.org/w/index.php?title=ISO_4074&action=edit&redlink=1http://en.wikipedia.org/wiki/Latexhttp://en.wikipedia.org/wiki/Condomshttp://en.wikipedia.org/wiki/ISO_4157http://en.wikipedia.org/wiki/ISO_4165http://en.wikipedia.org/w/index.php?title=ISO_4179&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_4217http://en.wikipedia.org/wiki/Currencyhttp://en.wikipedia.org/w/index.php?title=ISO_4628&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_4628&action=edit&redlink=1http://en.wikipedia.org/wiki/Currencyhttp://en.wikipedia.org/wiki/ISO_4217http://en.wikipedia.org/w/index.php?title=ISO_4179&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_4165http://en.wikipedia.org/wiki/ISO_4157http://en.wikipedia.org/wiki/Condomshttp://en.wikipedia.org/wiki/Latexhttp://en.wikipedia.org/w/index.php?title=ISO_4074&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_3977http://en.wikipedia.org/wiki/ISO_3901http://en.wikipedia.org/wiki/ISO_3864http://en.wikipedia.org/w/index.php?title=ISO_3676&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_3635&action=edit&redlink=1http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/Saffronhttp://en.wikipedia.org/w/index.php?title=ISO_3632&action=edit&redlink=1http://en.wikipedia.org/wiki/Kanahttp://en.wikipedia.org/wiki/ISO_3602http://en.wikipedia.org/wiki/O-ringhttp://en.wikipedia.org/wiki/ISO_3601http://en.wikipedia.org/wiki/Windshieldhttp://en.wikipedia.org/wiki/ISO_3538http://en.wikipedia.org/wiki/Windshieldhttp://en.wikipedia.org/wiki/ISO_3537http://en.wikipedia.org/wiki/Windshieldhttp://en.wikipedia.org/wiki/ISO_3536http://en.wikipedia.org/wiki/Stainless_steelhttp://en.wikipedia.org/wiki/ISO_3506http://en.wikipedia.org/wiki/ISO_3394http://en.wikipedia.org/wiki/International_standard_serial_numberhttp://en.wikipedia.org/wiki/ISO_3166-3http://en.wikipedia.org/wiki/ISO_3166-2http://en.wikipedia.org/wiki/ISO_3166-1http://en.wikipedia.org/wiki/ISO_3166http://en.wikipedia.org/wiki/Teahttp://en.wikipedia.org/wiki/ISO_3103http://en.wikipedia.org/wiki/ISO_3098http://en.wikipedia.org/wiki/ISO_3082http://en.wikipedia.org/w/index.php?title=ISO_3002&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_2852http://en.wikipedia.org/wiki/ISO_2709http://en.wikipedia.org/w/index.php?title=ISO_2692&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_2533http://en.wikipedia.org/wiki/ISO_2240http://en.wikipedia.org/wiki/ISO_2171http://en.wikipedia.org/wiki/ISO_2162http://en.wikipedia.org/wiki/ISO_2145http://en.wikipedia.org/wiki/International_standard_book_numberhttp://en.wikipedia.org/wiki/ISO/IEC_2022


8/18

o ISO 4628-7 Assessment of degree of chalking by velvet methodo ISO 4628-8 Assessment of degree of delamination and corrosion around a scribeo ISO 4628-10 Assessment of degree of filiform corrosion

ISO/IEC 4873: 1991 I nformation technology ISO 8-bit code for information interchange Structure and rules for implementation ISO 4892 Plastics Methods of exposure to laboratory light sources

ISO 5000 ISO 9999

ISO 5127 I nformation and documentation Vocabulary ISO 5167 Measurement of fluid flow by means of pressure differential devices inserted in circular cross-section conduits running full

o ISO 5167-1 General principles and requirementso ISO 5167-2 Orifice plateso ISO 5167-3 Nozzles and Venturi nozzleso ISO 5167-4 Venturi tubes

ISO/IEC 5218 Information technology Codes for the representation of human sexes ISO 5455 Technical drawings Scales ISO 5457 Technical product documentation Sizes and layout of drawing sheets ISO 5458 Geometrical Product Specifications (GPS) Geometrical tolerancing Positional tolerancing ISO 5459 Geometrical product specifications (GPS) Geometrical tolerancing Datums and datum systems ISO 5660 Reaction-to-fire tests Heat release, smoke production and mass loss rate

o ISO 5660-1 Heat release rate (cone calorimeter method)o ISO 5660-2 Smoke production rate (dynamic measurement)o ISO/TS 5660-3 Guidance on measurement

ISO 5725 Accuracy (trueness and precision) of measurement methods and results ISO 5775 Bicycle tires and rims ISO 5776 Graphic technology - Symbols for text correction ISO 5800: 2001 Photography Colour negative films for still photography Determination of ISO speed ISO 5893 Rubber and plastics test equipment Tensile, flexural and compression types (constant rate of traverse) Specification ISO 5964 Documentation Guidelines for the establishment and development of multilingual thesauri ISO 5971: 1981 Size designation of clothes Pantyhose ISO 5993 Sodium hydroxide for industrial use -- Determination of mercury content -- Flameless atomic absorption spectrometric method ISO 6107-4:1993 Water quality -- Vocabulary ISO 6166 Securities and related financial instruments International securities identification numbering system (ISIN)

ISO 6194 Rotary-shaft lip-type seals i ncorporating elastomeric sealing elementso ISO 6194-5 Identification of visual imperfections ISO 6336 Calculation of load capacity of spur and helical gears ISO 6344 Coated abrasives Grain size analysis

o ISO 6344-1 Grain size distribution testo ISO 6344-2 Determination of grain size distribution of macrogrits P12 to P220o ISO 6344-3 Determination of grain size distribution of microgrits P240 to P2500

ISO/IEC 6429 Information technology Control functions for coded character sets ISO 6438 Documentation African coded character set for bibliographic information interchange ISO/IEC 6523 Information technology Structure for the identification of organizations and organization parts ISO 6579 Microbiology of food and animal feeding stuffs Horizontal method for the detection of Salmonella spp. ISO 6594 Cast iron drainage pipes and fittings Spigot series ISO 6709 Standard representation of geographic point location by coordinates ISO 6946 Building components and building elements Thermal resistance and thermal transmittance Calculation method ISO 7001 Graphical symbols Public information symbols ISO 7002 Agricultural f ood products Layout for a standard method of sampling from a lot ISO 7098 I nformation and documentation Romanization of Chinese ISO 7200 Technical product documentation Data fields in title blocks and document headers ISO 7240 Fire detection and alarm systems ISO 7372 Trade data interchange ISO/IEC 7498 Information technology -- Open Systems Interconnection -- Basic Reference Mode l[Note 3]

o ISO/IEC 7498-1 The Basic Modelo ISO 7498-2 Security Architectureo ISO/IEC 7498-3 Naming and addressingo ISO/IEC 7498-4 Management framework

ISO/IEC 7501 Identification cards Machine readable travel documentso ISO/IEC 7501-1:2008 Machine readable passporto

ISO/IEC 7501-2:1997 Machine readable visao ISO/IEC 7501-3:2005 Machine readable official travel documents

ISO 7736 Road vehicles Car radio for front installation Installation space including connections
http://en.wikipedia.org/w/index.php?title=ISO/IEC_4873&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_4892&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_5127&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_5167&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO/IEC_5218http://en.wikipedia.org/w/index.php?title=ISO_5455&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_5457&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_5458&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_5459&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_5660&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_5725http://en.wikipedia.org/wiki/ISO_5775http://en.wikipedia.org/wiki/ISO_5776http://en.wikipedia.org/wiki/ISO_5800http://en.wikipedia.org/wiki/ISO_5964http://en.wikipedia.org/w/index.php?title=ISO_5971&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_6166http://en.wikipedia.org/w/index.php?title=ISO_6194&action=edit&redlink=1http://en.wikipedia.org/wiki/Radial_shaft_sealhttp://en.wikipedia.org/w/index.php?title=ISO_6336&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_6344http://en.wikipedia.org/wiki/Coated_abrasiveshttp://en.wikipedia.org/wiki/ISO/IEC_6429http://en.wikipedia.org/wiki/ISO_6438http://en.wikipedia.org/wiki/ISO/IEC_6523http://en.wikipedia.org/w/index.php?title=ISO_6579&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_6594&action=edit&redlink=1http://en.wikipedia.org/wiki/Piping_and_plumbing_fittingshttp://en.wikipedia.org/wiki/ISO_6709http://en.wikipedia.org/w/index.php?title=ISO_6946&action=edit&redlink=1http://en.wikipedia.org/wiki/Thermal_transmittancehttp://en.wikipedia.org/wiki/ISO_7001http://en.wikipedia.org/wiki/ISO_7002http://en.wikipedia.org/wiki/ISO_7098http://en.wikipedia.org/wiki/ISO_7200http://en.wikipedia.org/w/index.php?title=ISO_7240&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_7372&action=edit&redlink=1http://en.wikipedia.org/wiki/Open_Systems_Interconnectionhttp://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/w/index.php?title=ISO/IEC_7501&action=edit&redlink=1http://en.wikipedia.org/wiki/Machine_readable_passporthttp://en.wikipedia.org/w/index.php?title=Machine_readable_visa&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Machine_readable_official_travel_documents&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_7736http://en.wikipedia.org/wiki/ISO_7736http://en.wikipedia.org/w/index.php?title=Machine_readable_official_travel_documents&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=Machine_readable_visa&action=edit&redlink=1http://en.wikipedia.org/wiki/Machine_readable_passporthttp://en.wikipedia.org/w/index.php?title=ISO/IEC_7501&action=edit&redlink=1http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/Open_Systems_Interconnectionhttp://en.wikipedia.org/w/index.php?title=ISO_7372&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_7240&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_7200http://en.wikipedia.org/wiki/ISO_7098http://en.wikipedia.org/wiki/ISO_7002http://en.wikipedia.org/wiki/ISO_7001http://en.wikipedia.org/wiki/Thermal_transmittancehttp://en.wikipedia.org/w/index.php?title=ISO_6946&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_6709http://en.wikipedia.org/wiki/Piping_and_plumbing_fittingshttp://en.wikipedia.org/w/index.php?title=ISO_6594&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_6579&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO/IEC_6523http://en.wikipedia.org/wiki/ISO_6438http://en.wikipedia.org/wiki/ISO/IEC_6429http://en.wikipedia.org/wiki/Coated_abrasiveshttp://en.wikipedia.org/wiki/ISO_6344http://en.wikipedia.org/w/index.php?title=ISO_6336&action=edit&redlink=1http://en.wikipedia.org/wiki/Radial_shaft_sealhttp://en.wikipedia.org/w/index.php?title=ISO_6194&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_6166http://en.wikipedia.org/w/index.php?title=ISO_5971&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_5964http://en.wikipedia.org/wiki/ISO_5800http://en.wikipedia.org/wiki/ISO_5776http://en.wikipedia.org/wiki/ISO_5775http://en.wikipedia.org/wiki/ISO_5725http://en.wikipedia.org/w/index.php?title=ISO_5660&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_5459&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_5458&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_5457&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_5455&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO/IEC_5218http://en.wikipedia.org/w/index.php?title=ISO_5167&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_5127&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_4892&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO/IEC_4873&action=edit&redlink=1


9/18

ISO/IEC 7810 Identification cards Physical characteristics ISO/IEC 7811 Identification cards Recording technique ISO/IEC 7812 Identification cards Identification of issuers ISO/IEC 7813 Information technology Identification cards Financial transaction cards ISO/IEC 7816 Identification cards Integrated circuit card s [Note 3] ISO/IEC 7942 Information technology Computer graphics and image processing Graphical Kernel System (GKS)

ISO 8000 Data quality ISO 8015: 2011 Geometrical product specifications (GPS) Fundamentals Concepts, principles and rules ISO 8090 Cycles Terminology ISO 8180 Ductile iron pipelines Polyethylene sleeving for site application ISO 8373 Manipulating industrial robots Vocabulary ISO 8501 Preparation of steel substrates before application of paints and related products Visual assessment of surface cleanliness ISO 8559: 1989 Garment construction and anthropometric surveys Body dimensions ISO 8573 Compressed air

o ISO 8573-1 Contaminants and purity classeso ISO 8573-2 Test methods for oil aerosol contento ISO 8573-3 Test methods for measurement of humidityo ISO 8573-4 Test methods for solid particle contento ISO 8573-5 Test methods for oil vapour and organic solvent contento ISO 8573-6 Test methods for gaseous contaminant contento ISO 8573-7 Test method for viable microbiological contaminant contento ISO 8573-8 Test methods for solid particle content by mass concentrationo ISO 8573-9 Test methods for liquid water content

ISO 8583 Financial transaction card originated messages Interchange message specificationso ISO 8583-1 Messages, data elements and code valueso ISO 8583-2 Application and registration procedures for Institution Identification Codes (IIC)o ISO 8583-3 Maintenance procedures for messages, data elements and code values

ISO 8601 Data elements and interchange formats Information interchange Representation of dates and times ISO/IEC 8613 Information technology Open Document Architecture (ODA) and interchange format ISO/IEC 8632 Information technology Computer graphics Metafile for the storage and transfer of picture description information

o ISO/IEC 8632-1 Functional specificationo ISO/IEC 8632-2 Character encodingo ISO/IEC 8632-3 Binary encoding [withdrawn 2001-06-21]o ISO/IEC 8632-4 Clear text encoding

ISO 8651 Information technology Computer graphics Graphical Kernel System (GKS) language binding s[Note 3]

ISO/IEC 8652 Information technology Programming languages Ada ISO 8653: 1986 Jewellery Ring-sizes Definition, measurement and designation ISO 8691 Petroleum products Low levels of vanadium in liquid fuels Determination by flameless atomic absorption spectrometry after

ashing ISO 8805 Information processing systems Computer graphics Graphical Kernel System f or Three Dimensions (GKS-3D) functional

description ISO/IEEC 8806 Information technology Computer graphics Graphical Kernel System for Three Dimensions (GKS-3D) language

bindingso ISO/IEEC 8806-4 C

ISO 8807 Information processing systems Open Systems Interconnection LOTOS A formal description technique based on thetemporal ordering of observational behaviour

ISO/IEC 8824 Information technology Abstract Syntax Notation One ( ASN.1) ISO/IEC 8825 Information technology ASN.1 encoding rules

ISO/IEC 8859 Information technology

8-bit single-byte coded graphic character setso ISO/IEC 8859-1 Latin alphabet No. 1o ISO/IEC 8859-2 Latin alphabet No. 2o ISO/IEC 8859-3 Latin alphabet No. 3o ISO/IEC 8859-4 Latin alphabet No. 4o ISO/IEC 8859-5 Latin/Cyrillic alphabeto ISO/IEC 8859-6 Latin/Arabic alphabeto ISO/IEC 8859-7 Latin/Greek alphabeto ISO/IEC 8859-8 Latin/Hebrew alphabeto ISO/IEC 8859-9 Latin alphabet No. 5o ISO/IEC 8859-10 Latin alphabet No. 6o ISO/IEC 8859-11 Latin/Thai alphabeto ISO/IEC 8859-13 Latin alphabet No. 7o ISO/IEC 8859-14 Latin alphabet No. 8 (Celtic)o ISO/IEC 8859-15 Latin alphabet No. 9o ISO/IEC 8859-16 Latin alphabet No. 10

ISO 8879 Information processing Text and office systems Standard Generalized Markup Language (SGML) ISO 9000 Quality management systems Fundamentals and vocabulary
http://en.wikipedia.org/wiki/ISO/IEC_7810http://en.wikipedia.org/wiki/ISO/IEC_7811http://en.wikipedia.org/wiki/ISO/IEC_7812http://en.wikipedia.org/wiki/ISO/IEC_7813http://en.wikipedia.org/wiki/ISO/IEC_7816http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/Graphical_Kernel_Systemhttp://en.wikipedia.org/wiki/ISO_8000http://en.wikipedia.org/wiki/Data_qualityhttp://en.wikipedia.org/w/index.php?title=ISO_8015&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_8090&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_8180&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_8373http://en.wikipedia.org/w/index.php?title=ISO_8501&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_8559&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_8583http://en.wikipedia.org/wiki/ISO_8601http://en.wikipedia.org/wiki/ISO/IEC_8613http://en.wikipedia.org/wiki/Open_Document_Architecturehttp://en.wikipedia.org/wiki/Computer_Graphics_Metafilehttp://en.wikipedia.org/wiki/Graphical_Kernel_Systemhttp://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/ISO/IEC_8652http://en.wikipedia.org/wiki/Ada_%28programming_language%29http://en.wikipedia.org/w/index.php?title=ISO_8653&action=edit&redlink=1http://en.wikipedia.org/wiki/Jewelleryhttp://en.wikipedia.org/wiki/Ring_Sizehttp://en.wikipedia.org/wiki/ISO_8691http://en.wikipedia.org/wiki/Graphical_Kernel_Systemhttp://en.wikipedia.org/wiki/Graphical_Kernel_Systemhttp://en.wikipedia.org/wiki/Language_Of_Temporal_Ordering_Specificationhttp://en.wikipedia.org/w/index.php?title=ISO/IEC_8824&action=edit&redlink=1http://en.wikipedia.org/wiki/Abstract_Syntax_Notation_Onehttp://en.wikipedia.org/w/index.php?title=ISO/IEC_8825&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO/IEC_8859http://en.wikipedia.org/wiki/ISO/IEC_8859-1http://en.wikipedia.org/wiki/ISO/IEC_8859-2http://en.wikipedia.org/wiki/ISO/IEC_8859-3http://en.wikipedia.org/wiki/ISO/IEC_8859-4http://en.wikipedia.org/wiki/ISO/IEC_8859-5http://en.wikipedia.org/wiki/ISO/IEC_8859-6http://en.wikipedia.org/wiki/ISO/IEC_8859-7http://en.wikipedia.org/wiki/ISO/IEC_8859-8http://en.wikipedia.org/wiki/ISO/IEC_8859-9http://en.wikipedia.org/wiki/ISO/IEC_8859-10http://en.wikipedia.org/wiki/ISO/IEC_8859-11http://en.wikipedia.org/wiki/ISO/IEC_8859-13http://en.wikipedia.org/wiki/ISO/IEC_8859-14http://en.wikipedia.org/wiki/ISO/IEC_8859-15http://en.wikipedia.org/wiki/ISO/IEC_8859-16http://en.wikipedia.org/wiki/Standard_Generalized_Markup_Languagehttp://en.wikipedia.org/wiki/ISO_9000http://en.wikipedia.org/wiki/ISO_9000http://en.wikipedia.org/wiki/Standard_Generalized_Markup_Languagehttp://en.wikipedia.org/wiki/ISO/IEC_8859-16http://en.wikipedia.org/wiki/ISO/IEC_8859-15http://en.wikipedia.org/wiki/ISO/IEC_8859-14http://en.wikipedia.org/wiki/ISO/IEC_8859-13http://en.wikipedia.org/wiki/ISO/IEC_8859-11http://en.wikipedia.org/wiki/ISO/IEC_8859-10http://en.wikipedia.org/wiki/ISO/IEC_8859-9http://en.wikipedia.org/wiki/ISO/IEC_8859-8http://en.wikipedia.org/wiki/ISO/IEC_8859-7http://en.wikipedia.org/wiki/ISO/IEC_8859-6http://en.wikipedia.org/wiki/ISO/IEC_8859-5http://en.wikipedia.org/wiki/ISO/IEC_8859-4http://en.wikipedia.org/wiki/ISO/IEC_8859-3http://en.wikipedia.org/wiki/ISO/IEC_8859-2http://en.wikipedia.org/wiki/ISO/IEC_8859-1http://en.wikipedia.org/wiki/ISO/IEC_8859http://en.wikipedia.org/w/index.php?title=ISO/IEC_8825&action=edit&redlink=1http://en.wikipedia.org/wiki/Abstract_Syntax_Notation_Onehttp://en.wikipedia.org/w/index.php?title=ISO/IEC_8824&action=edit&redlink=1http://en.wikipedia.org/wiki/Language_Of_Temporal_Ordering_Specificationhttp://en.wikipedia.org/wiki/Graphical_Kernel_Systemhttp://en.wikipedia.org/wiki/Graphical_Kernel_Systemhttp://en.wikipedia.org/wiki/ISO_8691http://en.wikipedia.org/wiki/Ring_Sizehttp://en.wikipedia.org/wiki/Jewelleryhttp://en.wikipedia.org/w/index.php?title=ISO_8653&action=edit&redlink=1http://en.wikipedia.org/wiki/Ada_%28programming_language%29http://en.wikipedia.org/wiki/ISO/IEC_8652http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/Graphical_Kernel_Systemhttp://en.wikipedia.org/wiki/Computer_Graphics_Metafilehttp://en.wikipedia.org/wiki/Open_Document_Architecturehttp://en.wikipedia.org/wiki/ISO/IEC_8613http://en.wikipedia.org/wiki/ISO_8601http://en.wikipedia.org/wiki/ISO_8583http://en.wikipedia.org/w/index.php?title=ISO_8559&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_8501&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_8373http://en.wikipedia.org/w/index.php?title=ISO_8180&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_8090&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_8015&action=edit&redlink=1http://en.wikipedia.org/wiki/Data_qualityhttp://en.wikipedia.org/wiki/ISO_8000http://en.wikipedia.org/wiki/Graphical_Kernel_Systemhttp://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/ISO/IEC_7816http://en.wikipedia.org/wiki/ISO/IEC_7813http://en.wikipedia.org/wiki/ISO/IEC_7812http://en.wikipedia.org/wiki/ISO/IEC_7811http://en.wikipedia.org/wiki/ISO/IEC_7810


10/18

ISO 9001 Quality management systems Requirements ISO 9004 Managing for the sustained success of an organization A quality management approach ISO 9050 Glass in building Determination of light transmittance, solar direct transmittance, total solar energy transmittance, ultraviolet

transmittance and related glazing factors ISO 9069 I nformation processing SGML support facilities SGML Document Interchange Format (SDIF) ISO/IEC 9075 Information technology Database languages SQL

ISO/IEC 9126 Software engineering

Product quality ISO 9141 Road vehicles Diagnostic system s [Note 3] o ISO 9141-2 CARB requirements for interchange of digital informationo ISO 9141-3 Verification of the communication between vehicle and OBD II scan tool

ISO 9241 Ergonomics of human-system interaction ISO/IEC 9293 Information technology Volume and file structure of disk cartridges for information interchange ISO 9362 Banking Banking telecommunication messages Business identifier code (BIC) ISO 9407 Shoe sizes Mondopoint system of sizing and marking ISO/IEC 9541 Information technology Font information interchange

o ISO/IEC 9541-1:1991 Architectureo ISO/IEC 9541-2:1991 Interchange Formato ISO/IEC 9541-3:1994 Glyph shape representationo ISO/IEC 9541-4:2009 Harmonization to Open Font Format

ISO 9564 Financial services Personal Identification Number (PIN) management and securit y[Note 3]

ISO/IEC 9579 Information technology Remote database access for SQL with security enhancement ISO/IEC 9592 Information technology Computer graphics and image processing Programmer's Hierarchical Interactive GraphicsSystem (PHIGS)

ISO/IEC 9593 Information technology Computer graphics Programmer's Hierarchical Interactive Graphics System (PHIGS) languagebinding s[Note 3]

ISO/IEC 9594 Information technology Open Systems Interconnection The Directory ISO/IEC 9636 Information technology - Computer graphics - Interfacing techniques for dialogues with graphical devices (CGI) -

Functional specificationo ISO/IEC 9636-1 Overview, profiles, and conformanceo ISO/IEC 9636-2 Controlo ISO/IEC 9636-3 Outputo ISO/IEC 9636-4 Segmentso ISO/IEC 9636-5 Input and echoingo ISO/IEC 9636-6 Raster

ISO 9660 I nformation processing Volume and file structure of CD-ROM for information interchange ISO 9712 Non-destructive testing - Qualification and certification of NDT personnel ISO/IEC 9796 Information technology Security techniques Digital signature schemes giving message recovery ISO/IEC 9797 Information technology Security techniques Message Authentication Codes ( MACs)

o ISO/IEC 9797-1 Mechanisms using a block ciphero ISO/IEC 9797-2 Mechanisms using a dedicated hash-function

ISO/IEC 9798 Information technology Security techniques Entity authentication ISO/IEC 9834 Information technology Open Systems Interconnection Procedures for the operation of OSI Registration Authorities ISO 9869 Thermal insulation Building elements In-situ measurements of thermal resistance and thermal transmittance ISO/IEC 9899 Programming languages C ISO/IEC/IEEE 9945 Information technology Portable Operating System Interface (POSIX ) Base Specifications, Issue 7 ISO 9984 I nformation and documentation Transliteration of Georgian characters into Latin characters ISO 9985 I nformation and documentation Transliteration of Armenian characters into Latin characters ISO 9992 Financial transaction cards Messages between the integrated circuit card and the card accepting device ISO/IEC 9995 Information technology Keyboard layouts for text and office systems ISO 9999 Assistive products for persons with disability Classification and terminology

ISO 10000 ISO 14999

ISO 10001: 2007 Quality management Customer satisfaction Guidelines for codes of conduct for organizations ISO 10002: 2014 Quality management Customer satisfaction Guidelines for complaints handling in organizations ISO 10003: 2007 Quality management Customer satisfaction Guidelines for dispute resolution external to organizations ISO 10004: 2008 Quality management Customer satisfaction Guidelines for monitoring and measuring ISO 10005: 2005 Quality management systems Guidelines for quality plans ISO 10006: 2003 Quality management systems Guidelines for quality management in projects ISO 10007: 2003 Quality management systems Guidelines for configuration management ISO 10012: 2003 Measurement management systems Requirements for measurement processes and measuring equipment ISO/TR 10013: 2001 Guidelines for quality management system documentation ISO 10014: 2006 Quality management Guidelines for realizing financial and economic benefits
http://en.wikipedia.org/wiki/ISO_9001http://en.wikipedia.org/w/index.php?title=ISO_9069&action=edit&redlink=1http://en.wikipedia.org/wiki/SGMLhttp://en.wikipedia.org/wiki/ISO/IEC_9075http://en.wikipedia.org/wiki/SQLhttp://en.wikipedia.org/wiki/ISO/IEC_9126http://en.wikipedia.org/wiki/ISO_9141http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/w/index.php?title=ISO_9141-2&action=edit&redlink=1http://en.wikipedia.org/wiki/California_Air_Resources_Boardhttp://en.wikipedia.org/wiki/On-board_diagnosticshttp://en.wikipedia.org/wiki/ISO_9241http://en.wikipedia.org/wiki/ISO/IEC_9293http://en.wikipedia.org/wiki/ISO_9362http://en.wikipedia.org/wiki/ISO_9407http://en.wikipedia.org/w/index.php?title=ISO/IEC_9541&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_9564http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/w/index.php?title=ISO/IEC_9579&action=edit&redlink=1http://en.wikipedia.org/wiki/SQLhttp://en.wikipedia.org/wiki/PHIGShttp://en.wikipedia.org/wiki/ISO/IEC_9593http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/w/index.php?title=ISO/IEC_9594&action=edit&redlink=1http://en.wikipedia.org/wiki/Open_Systems_Interconnectionhttp://en.wikipedia.org/w/index.php?title=ISO/IEC_9636&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_9660http://en.wikipedia.org/wiki/CD-ROMhttp://en.wikipedia.org/w/index.php?title=ISO/IEC_9796&action=edit&redlink=1http://en.wikipedia.org/wiki/Message_Authentication_Codehttp://en.wikipedia.org/wiki/ISO/IEC_9797-1http://en.wikipedia.org/w/index.php?title=ISO/IEC_9797-2&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO/IEC_9798&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO/IEC_9834&action=edit&redlink=1http://en.wikipedia.org/wiki/Open_Systems_Interconnectionhttp://en.wikipedia.org/w/index.php?title=ISO_9869&action=edit&redlink=1http://en.wikipedia.org/wiki/Thermal_transmittancehttp://en.wikipedia.org/wiki/ISO/IEC_9899http://en.wikipedia.org/wiki/C_%28programming_language%29http://en.wikipedia.org/w/index.php?title=ISO/IEC/IEEE_9945&action=edit&redlink=1http://en.wikipedia.org/wiki/POSIXhttp://en.wikipedia.org/wiki/ISO_9984http://en.wikipedia.org/wiki/Latin_charactershttp://en.wikipedia.org/wiki/ISO_9985http://en.wikipedia.org/w/index.php?title=ISO_9992&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO/IEC_9995http://en.wikipedia.org/w/index.php?title=ISO_9999&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10001&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10002&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10003&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10004&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10005&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_10006http://en.wikipedia.org/wiki/ISO_10007http://en.wikipedia.org/wiki/Configuration_managementhttp://en.wikipedia.org/wiki/ISO_10012http://en.wikipedia.org/w/index.php?title=ISO/TR_10013&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10014&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10014&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO/TR_10013&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_10012http://en.wikipedia.org/wiki/Configuration_managementhttp://en.wikipedia.org/wiki/ISO_10007http://en.wikipedia.org/wiki/ISO_10006http://en.wikipedia.org/w/index.php?title=ISO_10005&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10004&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10003&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10002&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10001&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_9999&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO/IEC_9995http://en.wikipedia.org/w/index.php?title=ISO_9992&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_9985http://en.wikipedia.org/wiki/Latin_charactershttp://en.wikipedia.org/wiki/ISO_9984http://en.wikipedia.org/wiki/POSIXhttp://en.wikipedia.org/w/index.php?title=ISO/IEC/IEEE_9945&action=edit&redlink=1http://en.wikipedia.org/wiki/C_%28programming_language%29http://en.wikipedia.org/wiki/ISO/IEC_9899http://en.wikipedia.org/wiki/Thermal_transmittancehttp://en.wikipedia.org/w/index.php?title=ISO_9869&action=edit&redlink=1http://en.wikipedia.org/wiki/Open_Systems_Interconnectionhttp://en.wikipedia.org/w/index.php?title=ISO/IEC_9834&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO/IEC_9798&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO/IEC_9797-2&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO/IEC_9797-1http://en.wikipedia.org/wiki/Message_Authentication_Codehttp://en.wikipedia.org/w/index.php?title=ISO/IEC_9796&action=edit&redlink=1http://en.wikipedia.org/wiki/CD-ROMhttp://en.wikipedia.org/wiki/ISO_9660http://en.wikipedia.org/w/index.php?title=ISO/IEC_9636&action=edit&redlink=1http://en.wikipedia.org/wiki/Open_Systems_Interconnectionhttp://en.wikipedia.org/w/index.php?title=ISO/IEC_9594&action=edit&redlink=1http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/ISO/IEC_9593http://en.wikipedia.org/wiki/PHIGShttp://en.wikipedia.org/wiki/SQLhttp://en.wikipedia.org/w/index.php?title=ISO/IEC_9579&action=edit&redlink=1http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/ISO_9564http://en.wikipedia.org/w/index.php?title=ISO/IEC_9541&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_9407http://en.wikipedia.org/wiki/ISO_9362http://en.wikipedia.org/wiki/ISO/IEC_9293http://en.wikipedia.org/wiki/ISO_9241http://en.wikipedia.org/wiki/On-board_diagnosticshttp://en.wikipedia.org/wiki/California_Air_Resources_Boardhttp://en.wikipedia.org/w/index.php?title=ISO_9141-2&action=edit&redlink=1http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/ISO_9141http://en.wikipedia.org/wiki/ISO/IEC_9126http://en.wikipedia.org/wiki/SQLhttp://en.wikipedia.org/wiki/ISO/IEC_9075http://en.wikipedia.org/wiki/SGMLhttp://en.wikipedia.org/w/index.php?title=ISO_9069&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_9001


11/18

ISO 10015: 1999 Quality management Guidelines for training ISO/TR 10017: 2003 Guidance on statistical techniques for ISO 9001:2000 ISO 10018: 2012 Quality management Guidelines on people involvement and competence ISO 10019: 2005 Guidelines for the selection of quality management system consultants and use of their services ISO/IEC 10021 Information technology Message Handling Systems (MHS) ISO/IEC 10026 Information technology Open Systems Interconnection

ISO 10077 Thermal performance of windows, doors and shutters Calculation o f thermal transmittance ISO/IEC 10089 Information technology 130 mm rewritable optical disk cartridge for information interchange ISO/IEC 10116 Information technology Security techniques Modes of operation for an n -bit block cipher ISO/IEC 10118 Information technology Security techniques Hash-functions ISO 10160 Information and documentation Open Systems Interconnection Interlibrary Loan Application Service Definition ISO 10161 Information and documentation Open Systems Interconnection Interlibrary Loan Application Protocol Specification ISO/IEC 10164 Information technology Open Systems Interconnection Systems Management ISO/IEC 10179: 1996 Information technology Processing languages Document Style Semantics and Specification Language (DSSSL) ISO/IEC 10206 Information technology Programming languages Extended Pascal ISO 10211 Thermal bridges i n building construction Heat flows and surface temperatures Detailed calculations ISO 10218 Robots and robotic devices Safety requirements for industrial robots ISO/IEC 10279 Information technology Programming languages Ful l BASIC ISO 10303 Industrial automation systems and integration Product data representation and exchange ISO 10380 Pipework Corrugated metal hoses and hose assemblies ISO 10383 Securities and related financial instruments Codes for exchanges and market identification (MIC) ISO 10487 Passenger cars Connections for car radio s [Note 3] ISO 10555 Sterile, single-use intravascular catheters ISO 10579 Geometrical product specifications (GPS) Dimensioning and tolerancing Non-rigid parts ISO 10628 Flow diagrams for process plants ISO/IEC 10646 Information technology Universal Coded Character Set (UCS) ISO 10664 Hexalobular internal driving feature for bolts and screws Torx screw head ISO/IEC 10746 Information technology - Open distributed processing

o ISO/IEC 10746-1 Information technology - Open Distributed Processing - Reference model: Overviewo ISO/IEC 10746-2 Information technology - Open distributed processing - Reference model: Foundationso ISO/IEC 10746-3 Information technology - Open distributed processing - Reference model: Architectureo ISO/IEC 10746-4 Information technology - Open Distributed Processing - Reference Model: Architectural semantics

ISO 10957 Information and documentation

International standard music number (ISMN) ISO 10962 Securities and related financial instruments Classification of Financial Instruments (CFI code)

ISO 10993 Biological evaluation of medical deviceso ISO 10993-1 Evaluation and testing within a risk management processo ISO 10993-2 Animal welfare requirementso ISO 10993-3 Tests for genotoxicity, carcinogenicity and reproductive toxicityo ISO 10993-4 Selection of tests for interactions with bloodo ISO 10993-5 Tests for in vi tro cytotoxicityo ISO 10993-6 Tests for local effects after implantationo ISO 10993-7 Ethylene oxide sterilization residualso ISO 10993-9 Framework for identification and quantification of potential degradation productso ISO 10993-10 Tests for irritation and skin sensitizationo ISO 10993-11 Tests for systemic toxicityo ISO 10993-12 Sample preparation and reference materialso ISO 10993-13 Identification and quantification of degradation products from polymeric medical deviceso ISO 10993-14 Identification and quantification of degradation products from ceramicso ISO 10993-15 Identification and quantification of degradation products from metals and alloyso ISO 10993-16 Toxicokinetic study design for degradation products and leachableso ISO 10993-17 Establishment of allowable limits for leachable substanceso ISO 10993-18 Chemical characterization of materialso ISO 10993-19 Physico-chemical, morphological and topographical characterization of materialso ISO 10993-20 Principles and methods for immunotoxicology testing of medical devices

ISO 11064 Ergonomic design of control centreso ISO 11064-1: 2000 Principles for the design of control centreso ISO 11064-2: 2000 Principles for the arrangement of control s uiteso ISO 11064-3: 1999 Control room layout ISO 11064-3:1999/Cor 1:2002o ISO 11064-4: 2004 Layout and dimensions of workstationso ISO 11064-5: 2008 Displays and controlso ISO 11064-6: 2005 Environmental requirements for control centreso ISO 11064-7: 2006 Principles for the evaluation of control centres

ISO 11120 Gas cylinders -- Refillable seamless steel tubes for compressed gas transport, of water capacity between 150 l and 3000 l --Design construction and testing

ISO 11137 Sterilization of health care products Radiation
http://en.wikipedia.org/w/index.php?title=ISO_10015&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO/TR_10017&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10018&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10019&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO/IEC_10021http://en.wikipedia.org/w/index.php?title=ISO/IEC_10026&action=edit&redlink=1http://en.wikipedia.org/wiki/Open_Systems_Interconnectionhttp://en.wikipedia.org/w/index.php?title=ISO_10077&action=edit&redlink=1http://en.wikipedia.org/wiki/Thermal_transmittancehttp://en.wikipedia.org/w/index.php?title=ISO/IEC_10089&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO/IEC_10116http://en.wikipedia.org/w/index.php?title=ISO/IEC_10118&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_10160http://en.wikipedia.org/wiki/Interlibrary_Loanhttp://en.wikipedia.org/wiki/ISO_10161http://en.wikipedia.org/w/index.php?title=ISO/IEC_10164&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO/IEC_10179http://en.wikipedia.org/wiki/Document_Style_Semantics_and_Specification_Languagehttp://en.wikipedia.org/w/index.php?title=ISO/IEC_10206&action=edit&redlink=1http://en.wikipedia.org/wiki/Pascal_%28programming_language%29http://en.wikipedia.org/w/index.php?title=ISO_10211&action=edit&redlink=1http://en.wikipedia.org/wiki/Thermal_bridgehttp://en.wikipedia.org/wiki/ISO_10218http://en.wikipedia.org/w/index.php?title=ISO/IEC_10279&action=edit&redlink=1http://en.wikipedia.org/wiki/BASIChttp://en.wikipedia.org/wiki/ISO_10303http://en.wikipedia.org/w/index.php?title=ISO_10380&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_10383http://en.wikipedia.org/wiki/ISO_10487http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/w/index.php?title=ISO_10555&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10579&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10628&action=edit&redlink=1http://en.wikipedia.org/wiki/Process_flow_diagramhttp://en.wikipedia.org/wiki/ISO/IEC_10646http://en.wikipedia.org/wiki/Universal_Character_Sethttp://en.wikipedia.org/wiki/ISO_10664http://en.wikipedia.org/wiki/Torxhttp://en.wikipedia.org/w/index.php?title=ISO/IEC_10746&action=edit&redlink=1http://en.wikipedia.org/wiki/International_Standard_Music_Numberhttp://en.wikipedia.org/wiki/ISO_10962http://en.wikipedia.org/wiki/ISO_10993http://en.wikipedia.org/w/index.php?title=ISO_10993-1&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-2&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-3&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-4&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-5&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-6&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-7&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-9&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-10&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-11&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-12&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-13&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-14&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-15&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-16&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-17&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-18&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-19&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-20&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-1&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-2&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-3&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-4&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-5&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-6&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-7&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11120&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11137&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11137&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11120&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-7&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-6&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-5&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-4&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-3&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-2&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064-1&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_11064&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-20&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-19&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-18&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-17&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-16&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-15&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-14&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-13&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-12&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-11&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-10&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-9&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-7&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-6&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-5&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-4&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-3&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-2&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10993-1&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_10993http://en.wikipedia.org/wiki/ISO_10962http://en.wikipedia.org/wiki/International_Standard_Music_Numberhttp://en.wikipedia.org/w/index.php?title=ISO/IEC_10746&action=edit&redlink=1http://en.wikipedia.org/wiki/Torxhttp://en.wikipedia.org/wiki/ISO_10664http://en.wikipedia.org/wiki/Universal_Character_Sethttp://en.wikipedia.org/wiki/ISO/IEC_10646http://en.wikipedia.org/wiki/Process_flow_diagramhttp://en.wikipedia.org/w/index.php?title=ISO_10628&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10579&action=edit&redlink=1http://en.wikipedia.org/w/index.php?title=ISO_10555&action=edit&redlink=1http://en.wikipedia.org/wiki/List_of_International_Organization_for_Standardization_standards#cite_note-VariesBetweenParts-5http://en.wikipedia.org/wiki/ISO_10487http://en.wikipedia.org/wiki/ISO_10383http://en.wikipedia.org/w/index.php?title=ISO_10380&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_10303http://en.wikipedia.org/wiki/BASIChttp://en.wikipedia.org/w/index.php?title=ISO/IEC_10279&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_10218http://en.wikipedia.org/wiki/Thermal_bridgehttp://en.wikipedia.org/w/index.php?title=ISO_10211&action=edit&redlink=1http://en.wikipedia.org/wiki/Pascal_%28programming_language%29http://en.wikipedia.org/w/index.php?title=ISO/IEC_10206&action=edit&redlink=1http://en.wikipedia.org/wiki/Document_Style_Semantics_and_Specification_Languagehttp://en.wikipedia.org/wiki/ISO/IEC_10179http://en.wikipedia.org/w/index.php?title=ISO/IEC_10164&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO_10161http://en.wikipedia.org/wiki/Interlibrary_Loanhttp://en.wikipedia.org/wiki/ISO_10160http://en.wikipedia.org/w/index.php?title=ISO/IEC_10118&action=edit&redlink=1http://en.wikipedia.org/wiki/ISO/IEC_10116http://en.wikipedia.org/w/index.php?title=ISO/IEC_10089&action=edit&redlink=1http://en.wikipedia.org/wiki/Thermal_transmittancehttp://en.wikipedia.org/w/index.php?title=ISO_10077&action=edit&redlink=1http://en.wikipedia.org/wiki/Open_Systems_Interconnectionhttp://en.wikipedia.org/w/index.php?title=ISO/IEC_10026&am

what is international standard organization

Documents