what is the planetary boundary layer?
DESCRIPTION
What is the Planetary Boundary Layer?. The PBL is defined by the presence of turbulent mixing that couples the air to the underlying surface on a time scale of less than a few hours. Diurnal evolution of the convective and stable boundary layers in - PowerPoint PPT PresentationTRANSCRIPT
What is the Planetary Boundary Layer?
•The PBL is defined by the presence of turbulent mixing that couples the air to the underlying surface on a time scale of less than a few hours
Diurnal evolution of the convective and stable boundary layers in response to surface heating (sunlight) and cooling.
surface →
layer
mixed →
layer
free →
troposphere
Dimensional arguments for turbulent exchange in the surface (or constant flux) layer (~ 0.1 zi) lead us to an eddy diffusivity, or turbulent exchange coefficient for momentum,
Km = = ρu*z
where ρ is air density, u* is the friction velocity (= - <u΄w΄>) and z is height above the ground. Integrating this yields
where z0 is the roughness length.
Logarithmic surface-layer profile
zU
u
/
2*
0
* lnz
z
k
uU
Roughness lengths zo for different natural surfaces (from M. de Franceschi, 2002, derived from Wieringa, 1993).
zo (m) Landscape Description________________________________________________________________0.0002 Open sea or lake, tidal flat, snow-covered plain, featureless desert, tarmac, concrete with a fetch of several km.0.005 Featureless land surface without any noticeable obstacles; snow covered or fallow open country0.03 Level country with low vegetation and isolated obstacles with separations of at least 50 obstacle heights0.10 Cultivated area with regular cover of low crops; moderately open country with occasional obstacles with separations of at least 20 obstacle heights0.25 Recently developed “young” landscape with high crops or crops of varying height and scattered obstacles at relative distances of about 15 obstacle heights0.50 Old cultivated landscape with many rather large obstacle groups separated by open spaces of about 10 obstacle heights; low large vegetation with with small interstices1.0 Landscape totally and regularly covered with similar sized obstacles with interstices comparable to the obstacle heights; e.g., homogeneous cities
Wind profile in stable, neutral and unstable air.
(
/
(AND STABLE)
MO Surface-layer formulations:
Φm = (kz/u*)(U/z) - wind shear
Φh = (kz/T*)(θ/z) - thermal stratification
Φw = σw/u* - fluctuations in vertical velocity
Φθ = σθ/|T*| - fluctuations in temperature
Φε = kzε/u*3 - turbulence energy dissipation
Idealized stable boundary-layer flow regimes as a function of height and
stability. The vertical dashed line indicates the value of z = L corresponding
to the maximum downward heat flux (Mahrt, BLM, 1999).
Suggestions for Further Reading
Main Reference Sources for these Lectures
Belcher, S.E. and J.C.R. Hunt, 1998: Turbulent flow over hills and waves. Annu. Rev. Fluid Mech.. 30:507-538.
Blumen, W., 1990: Atmospheric Processes Over Complex Terrain. American Meteorological Society, Boston, MA.
Geiger, R., R.H. Aron and P. Todhunter, 1961: The Climate Near the Ground. Vieweg & Son, Braunschweig.
Kaimal, J.C. and J.J. Finnigan, 1994: Atmospheric Boundary Layer Flows. Oxford Univ. Press, New York.
Oke, T.R., 1987: Boundary Layer Climates. Routledge, New York.
Venkatram, A. and J.C. Wyngaard, Eds.,1988: Lectures on Air Pollution Modeling. American Meteorological Society, Boston MA.
Abstracts from the10th Conference on Mountain Meteorology, 17-21 June 2002, Park City, UT, American Meteorological Society, Boston.