where the dust settles… catalog x - water trucks the dust settles… ® ® catalog x. 1 •...

Where the Dust Settles…

®

®

Catalog X

1 www.watertrucks.com•800.600.TANK•602.253.7739

TABLE OF CONTENTS

Table of Contents

©2009UnitedTruck&Equipment,Inc.Allrightsreserved.Anyreproduction(includingelectronic)withoutpriorwrittenpermissionisforbidden. photography & design: www.crosbymultimedia.com

UNITEdTrUcKSySTEmS&KITS .......................... 2-12

Factory Installed Systems .........................................2

Drop-on R-Kits .........................................................3

Unassembled U-Kits .................................................4

Hook/Roll Off Tanks & Flusher Systems ....................5

Slide-in Tanks & Tank Trailers ...................................6

Off & On Highway Tank Systems ..............................7

Fire Tenders .............................................................8

Water Towers ...........................................................9

System Options ......................................................10

Plumbing Kits ........................................................11

Pre-Assembled Plumbing Kits..................................12

TANKINformATIoN&PArTS ........................... 13-16

Tank Options & Information ..............................13-14

Gravity Drop ..........................................................15

Tank Mounting Hardware .......................................15

Mud Flaps, Sight Gauge, & Skirtboard .....................15

Hydrant Fills and Accessories ..................................16

Manways and Accessories .......................................16

Quick Dump Valves ................................................16

SPrAyVAlVES,NozzlES,&rEPAIrPArTS ....... 17-22

Air Operated Sprayhead Kits ..................................17

Sprayhead Nozzles ................................................18

Air Operated Inline Valves - External Repair Parts ...19

Internal Repair Parts ..............................................20

Electric Operated Valves .........................................21

Air Operated Wafer Valves .....................................21

Actuators ...............................................................21

Actuators Continued & Manual Valves .....................22

coNTrolSforAIr,ElEcTrIc&mANUAlVAlVES .. 23

AIrlINE-fITTINgS,rEgUlATorS,VAlVES ............ 24

PlUmbINgPArTS&rEPlAcEmENTPArTS ........ 25-28

Elbows & Flanges ...................................................25

Tees, Crosses, Reducers, Caps/Plugs ........................26

Nipples, Couplings ..................................................27

Camlocs, Hose Barbs, Swivels .................................28

Gaskets & Repair Kits .............................................29

lIghTS .................................................................. 30

Harnesses & Brackets .............................................30

hoSErEElS,hoSES,NozzlES/STrAINErS ....... 31-32

Cox Reels & Replacement Parts ..............................31

Hoses, Strainers/Foot Valves ..................................32

Hose Nozzles & Clamps ..........................................32

WATErmoNITorS&cANNoNS ........................ 33-34

Manual, Remote Electric & Accessories ....................33

Sidewinder Repair Parts & Diagrams .......................34

hydrAUlIcS .................................................... 35-36

Motors, Pumps, Valves, Adapters ............................35

Hydraulic Tank Kits, Filters .....................................35

Diagrams, PTOs, Driveline U-Joints & Yokes ............36

bErKElEyWATErPUmPS ................................. 37-41

Pump Rotation Guide .............................................37

B3ZRM/B3ZRMS/B4ZRKS ......................................38

B6Z/B4ERBMS/B3JRMBMS ....................................39

Hydraulic Drive B3, B4, B6.....................................40

Heavy Duty “Z” Frame ..........................................41

WESTErN/moNArch ....................................... 42-43

Western Pumps XS-9/XS-13 ...................................42

Monarch NT3/MIH-40 ............................................43

ENgINEdrIVE ....................................................... 44

UNITEdTrUcKASSEmblIES/dIAgrAmS ........... 45-48

Bypass, Air Articulated, Rear Bar, Front Bar.............45

Hose Reel, Suction Fill, Spray Monitor .....................46

Pump Plumbing & Tank Mounting Diagrams ......47-48

Standard 4X3, Standard 4X3 with Suction ...............47

Tank Mounting with Skirtboard ...............................47

Plumbing Photos ....................................................48

formSANdINformATIoN .............................. 49-50

Truck Specification Form.........................................49

Operation & Maintenance .......................................50

www.watertrucks.com•800.600.TANK•602.253.7739 2

FACTORY INSTALLED 5 VALVE TANK SYSTEM

STANDARD SIZES: 1800-2450 gallons (single axle) 3000-6000 gallons (tandem axle) Unitedbuilt® tank. 5 year tank warranty.

5 VALVE SPRAY SYSTEM: Five independently air operated UTEAV9030 valves (see page 17 for optional valves): Two valves at back of tank. Two valves at front of truck. One mid-ship valve on driver’s side. Each valve is

independently air operated from cab control console. All plumbing is schedule 40 steel pipe with groove style flexible fittings throughout (no threaded fittings or hose plumbing). JET VALVE: Standard 1-1⁄2” ball valve on tank ladder side off the manifold. SIGHT GAUGE: 5⁄8” clear tubing at front and rear of tank. WATER PUMP: Berkeley, or Western 4x3 centrifugal cast iron pump 750GPM@75PSI, with ceramic mechanical seal (1000GPM@125 PSI available). PTO: Chelsea heavy duty two gear air shift PTO with 1310 series balanced tube drive line (HOT shift PTO available for automatic transmission). LIGHTS: DOT sealed beam lights with wiring encased in rubber. PAINT: Exterior sand blasted and primed, urethane enamel paint applied. (See paint options on page 14) MOUNTING: Heavy duty angle tie down mounts, spring loaded at front of tank. Vulcanized rubber wear pad for tanks 3000 gallons and larger. REAR BUMPER: Frame is tailed out; push block constructed of 1⁄2” steel, reinforced with 1⁄2” steel gussets, storage box with hinged lid. DRIVE-UNDER PROTECTION: 3⁄16” 3x3 square tubing lowered from bumper. FRONT SPRAY GUARD: 3⁄16” steel plate welded to front spray bar to provide protection. CAPACITY OPTIONS: 1500 – 8000 gallons. 1 year plumbing warranty

1800-2450 gallons single axleShown with optional hose reel

3000-6000 gallons tandem axle

FACTORY INSTALLED 5 VALVE AIR SYSTEM On your truck or ours. Call for models and availability.

See page 10 for system options.


DROP ON “R” TANK

STANDARD SIZES: 2000-2450 gallons (single axle) 3000-6000 gallons (tandem axle). Unitedbuilt® tank. 5 year tank warranty. 4 VALVE SPRAY SYSTEM: Four independently air operated UTEAV9030 water spray valves: two valves mounted each side front of tank and two valves mounted each side rear of tank. Valves are independently air operated from cab control console. All plumbing is schedule 40 steel pipe with groove style flexible fittings. (no threaded fittings or hose plumbing). WATER PUMP: Berkeley or Western 4x3 centrifugal cast iron pump

750GPM@75PSI, with ceramic mechanical seal. OPTIONAL WATER PUMP: Monarch MIH40 or Berkeley B4ZRKS 4x4 self-prime centrifugal cast iron pump 650GPM@50PSI, required with self loading option (pictured below). DRIVE: Hydraulic drive, Commercial 31 series hydraulic pump and motor. Motor pre-plumbed to water pump with filter, pressure relief valve, oil reservoir. Hydraulic lines (pressure and suction) pre-plumbed through water tank for fluid cooling. MOUNTING KIT: (6) heavy duty angle tie down mounts, with springs (4) and tank guides. Vulcanized rubber wear pad for tanks 2400 gallons and larger. LIGHTS: D.O.T. sealed beam lights with wiring encased in rubber. PAINT: Exterior sandblasted and primed (shown with optional paint). See page 14 for paint options. 1 year plumbing warranty

“R” KIT OPTIONSHose Reel - Manual or Electric Rewind • Front Spray with Plumbing and Hardware

Suction Fill Plumbing with Hose and Strainer • Gravity Drop • Water Cannon - Manual or Electric Quick Dump • Custom Paint Color • Clear Coat • Epoxy Lined

CAPACITY OPTIONS: 1500 - 8000 gallons. 1 year plumbing warranty VALVE OPTIONSAV9030 Air valves (standard): Air to Close, Interchangeable Nozzle Options M2410 Air valves: Air to Open, Built-in Adjustable NozzleElectric Valves: BMC 12 volt or 24 voltInline Air Valves: Bermad, Dorot-Netafim, Cla-Valve, UTE

NOZZLE OPTIONS – for AV9030 and Inline valves• Street Flusher Nozzle • Side Spray Nozzle• Adjustable Spray Nozzle• Fan Spray Nozzle

OTHER SET UP OPTIONSAir Articulated Spray NozzleRaised/Centered Spray HeadLowered Flusher Spray NozzleManually Controlled Spray Heads

DROP ON “R” KIT Fully plumbed and ready to go.


5 AIR VALUE “U” KIT

5 AIR VALVE “U” KITSTANDARD SIZES: 2000-2450 gallons (single axle) 3000-6200 gallons (tandem axle) Unitedbuilt® tank. 5 year tank warranty SPRAY SYSTEM: Five independently air operated UTEAV9030 valves. Two valves for rear spray, two valves for front spray, one valve for side spray. All plumbing provided is schedule 40 steel pipe with groove style flexible fittings. The kit comes standard with a UTE console to independently air operate each valve from inside the cab. WATER PUMP: Berkeley or Western 4x3 centrifugal cast iron pump 750GPM@75PSI with ceramic mechanical seal. MOUNTING KIT: (6) heavy duty angle tie down mounts with tank guides and hardware, vulcanized rubber wear pad for tanks 3000 gallons and larger. CUT OUTS: Pre-Measured steel arches for manifold pipe clearance under tank, packed loose for custom installation. LIGHTS: D.O.T. sealed beam lights with wiring encased in rubber. PAINT: Exterior sandblasted and primed. CAPACITY OPTIONS: 1500-8000 gallons. 1 year plumbing warranty

“U” KIT OPTIONSHose Reel - Manual or Electric Rewind • Curb Side Spray with Plumbing and Hardware

Suction Fill Plumbing with Hose and Strainer • Gravity Drop • Water Cannon - Manual or ElectricQuick Dump • Custom Paint Color • Clear Coat • Epoxy Lined

VALVE OPTIONSAV9030 Air valves (standard): Air to Close, Interchangeable Nozzle Options M2410 Air valves: Air to Open, Built-in Adjustable NozzleElectric Valves: BMC 12 volt or 24 voltInline Air Valves: Bermad, Dorot-Netafim, Cla-Valve, UTE NOZZLE OPTIONS – for AV9030 and Inline valves• Street Flusher Nozzle • Side Spray Nozzle• Adjustable Spray Nozzle• Fan Spray Nozzle OTHER SET UP OPTIONSAir Articulated Spray NozzleRaised/Centered Spray HeadLowered Flusher Spray NozzleManually Controlled Spray Heads


HOOK/ROLL OFF TANK & FLUSHER SYSTEM

HOOK/ROLL OFF TANKCAPACITY: 2000-4000 gallons. Unitedbuilt® tank 5 year tank warranty. HOOK/ROLL RECEIVER: Receiver A-frame for hook arm/Rollers for roll off bed and skids built to the specifications of the hook/roller manufacturer. SKIDS: Heavy duty 3” x 6” tubing with 3⁄8” wall full length skids extending out the back of the tank for the water pump platform and rollers. BELLY PLATE: Full belly plate along bottom of tank. WATER PUMP: Berkeley or Western 4x3 centrifugal cast iron pump 750GPM@75PSI, with ceramic mechanical seal.

OPTIONAL WATER PUMP: Monarch MIH40 or Berkeley B4ZRKS 4x4 self-prime centrifugal cast iron pump 650GPM@50PSI, required with self loading option. HYDRAULICS: Commercial 31 series motor and quick disconnect fittings. OPTIONAL: Hydraulic lines routed through tank depending on the location of chassis’s quick couplers. PAINT: Exterior sandblasted and primed. NOTE: Customer truck must have an extra hydraulic circuit to drive the water pump. 1 year plumbing warranty

FACTORY INSTALLED FLUSHER SYSTEMSTANDARD SIZES: 2000-2400 gallons (single axle) 3000-5200 gallons (tandem axle). Unitedbuilt® tank 5 year tank warranty. 6 VALVE SPRAY SYSTEM: Six independently air operated UTEAV9030 valves with flusher nozzles: Two valves with lowered flusher nozzles at front of truck. Two valves with lowered flusher nozzles on each side of truck behind the cab. Two valves at back of the tank with standard adjustable fan sprays. (Truck pictured with optional front center flushing

nozzle and remote control cannon.) All plumbing in schedule 40 steel pipe with groove style flexible fittings throughout (no thread fittings or hose plumbing). WATER PUMP: Berkeley B4ERBMS 5x4 centrifugal cast iron pump 900GPM @ 150PSI with ceramic mechanical seal. DRIVE: Chelsea heavy duty two gear air shift PTO with 1310 series balanced tube drive line. MOUNTING: Heavy duty angle tie down mounts, spring loaded at front of tank. Vulcanized rubber wear pad for tanks 3000 gallon and larger. LIGHTS: DOT sealed beam lights with wire looms encased in rubber. PAINT: Exterior sandblasted, urethane enamel paint applied. REAR BUMPER: Frame is tailed out: Push block constructed of 1⁄2” steel with storage and hinged lid. 1 year plumbing warranty


SLIDE IN TANK & TANKER TRAILER

SLIDE IN TANKCAPACITY: 2000-4000 gallons. Unitedbuilt® tank 5 year tank warranty. TANK: Rectangle shape constructed of 3⁄16” ASTM-A-36 steel. Ends recessed in shell, welded 100% on both sides. BAFFLES: Two lateral. SKIDS: Six inch channel skids running full length of tank and extending out the rear for the pump mounting platform. MOUNTING: Heavy duty tie down eyes at each corner of the tank. WATER PUMP: Monarch 3” pump with Honda 9HP

engine or Berkeley 3” pump with Robin 13.5HP engine (tank pictured with quick disconnect hydraulic drive). SPRAY SYSTEM: Two fan heads at rear of tank with one air operated in-line valve. Tank pictured with optional Berkeley B4ZRKS hydraulic drive water pump and suction fill plumbing. 1 year plumbing warranty

TANK TRAILER

CAPACITY: 6500 gallons (tank pictured in optional stainless steel). Unitedbuilt® tank 5 year tank warranty. SPRAY SYSTEM: 2-6 independently air operated UTEAV9030 valves. 5th wheel plate. Landing gear, heavy duty tandem axle. Hydraulic drive or auxiliary drive spray system. 1 year plumbing warranty


OFF & ON HIGHWAY TANK SYSTEMS

OFF HIGHWAY TANK SYSTEMSCAPACITY: 5,500 - 15,000 gallons. Unitedbuilt® tank 5 year tank warranty.SEVERE SERVICE TANK: 1⁄4” ASTM-A-36 TOP, 5⁄16” ASTM-A-36 BOTTOM construction. Full lateral and longitudinal baffles. Safety railings run the length of the tank on both sides. 30” screened manway. Drive tire fenders cut and welded into tank. Flexing tank mount system with pin box built into bottom of tank. DOT lights and reflectors with wiring encased in conduit,

Hydraulic motor close coupled to water pump. Standard B3 water pump performance 750GPM@75PSI. (Optional B4 high volume and pressure water pump rated at 1500GPM@100PSI) United heavy duty air operated spray heads adjustable pattern and volume spray band. 1 year plumbing warranty

ON HIGHWAY TANK SYSTEMSCAPACITY: 3,600-4,200 gallons (3,600 pictured) legal load. Unitedbuilt® tank 5 year tank warranty. 5 VALVE SPRAY SYSTEM: Five independently air operated UTEAV9030 valves; two valves at back of tank, two valves at front of truck, and one valve on driver’s side. (Truck pictured with optional 3” inline air operated valves.) Each valve is independently air operated from cab control console. All plumbing is schedule 40 steel pipe with groove style flexible fittings throughout. WATER PUMP: Berkeley 4x3 centrifugal cast iron pump 750GPM@75PSI, with ceramic mechanical seal. PTO: Chelsea heavy duty two gear air shift PTO with 1310 series balanced tube drive line (tank pictured with optional diesel drive pony motor for water pump). LIGHTS: DOT sealed beam lights with wiring encased in rubber. PAINT: Exterior sand blasted and primed, urethane enamel paint applied. MOUNTING: Heavy duty angle tie down mounts, spring loaded at front of tank. Vulcanized rubber wear pad for tanks 3000 gallons and larger. REAR BUMPER: Frame is tailed out; push block constructed of 1⁄2” steel with storage and hinged lid. 1 year plumbing warranty


FIRE TENDER

FIRE TENDER.

STANDARD SIZES: 2000-4000 gallons. WATER PUMP: Berkeley or Hale cast iron centrifugal pump, 750GPM@75PSI or 900GPM@150PSI with a ceramic mechanical seal. DISCHARGE: 21⁄2” discharge valves with male NST threads plumbed to any location of the truck. SIDE SPRAYS: Air operated side spray valves (pictured). QUICK DUMP: 10” manual or electric quick dump with 90 degree chute for rear dump or side dump. MONITORS: Manual (pictured), air operated or 12V remote control monitor. STORAGE: Portable tank storage and ladder holders built onto main tank. Tool boxes around frame of truck. 1 year plumbing warranty CALL WITH YOUR CUSTOM SPECIFICATIONS


WATER TOWER - REAR PRESSURE/GRAVITY DROP BAR

REAR PRESSURE BAR: 3” x 8’ rear mounted with 1⁄2” brass jet nozzles on 6” centers. Air operated 2’ extensions (see below) on each side of spray bar for a total of 12’ when lowered.

GRAVITY DROP BAR: 4” x 96” rear mounted with 1⁄2” jets on 6” centers. Air operated and controlled from cab console.

REAR PRESSURE/GRAVITY DROP BAR

Brass jet nozzledEScrIPTIoN WEIghT PArT#Brass jet nozzle 0.20lb. 3909

When it comes to making a difference in water tower design, United Truck & Equipment starts with a wider structural tube base (102”) with reinforced triangulated bracing for maximum stability. In the interests of safety and convenience the fill system shut-off float valve requires no special attention before or after transporting; simply empty the water tank, hook-up your tractor and go. At the job site just raise and secure the tank, hook-up to a water source and your United Truck & Equipment water tower is ready to go to work.

Another advantage to a United Truck & Equipment water tower is the versatile overhead discharge spout. Within minutes, this light weight groove mounted aluminum attachment can be routed straight to the front of the tower, or to either side. When set to side discharge, the center of the outlet opening is a full eight feet away from the side of the water tower tank and base. AddITIoNAlfEATUrES • Enginepoweredhydraulicactuatedliftandlowersystem.Powerunit

easily disconnects for security.• Dual3”fillpipes,easilyaccessiblefromgroundlevel.• Heavydutyaxlewitha102”widetrack,airbrakesanddual11.00x

22.5 tires on hub pilot wheels.• Rearmountedladderwithalargelevelplatformontopoftankand

hand holds for safety. Access ladder to tank interior.

• D.O.T.Lights• Dimensions:(12,000gallontower) OverallLength:37’-6” OverallWidth:8’-6” TowingHeight(on48”high5thwheel):13’-6”


SYSTEM OPTIONS

(a)

(b)

(c) (d)

(e)

(e)

OPTIONAL ITEMS FOR KITS OR INSTALLED SYSTEMSHIGH PRESSURE PUMP: Berkeley Centrifugal 150PSI @ 900 GPM AUXILIARY ENGINE: Diesel engine drive (Page 44)HYDRAULIC DRIVE: Commercial 31 series hydraulics (Page. 35)HOT SHIFT PTO: Spicer 230/271PAINT: Dupont Centari or Imron (Page 14)EPOXY: Sandblast interior of tank and epoxy coat (Page 14)GRAVITY DROP: Air activated 6” gravity drop (Page 15)

Frame mounted manualhose reel

Rear head mountedmanual hose reel

Shown 12v rear mount. Manual rear view

HOSE REEL MANUAL: 50’x1” hose & nozzle (Pages 31 & 46) 50’x11⁄2” hose & nozzle 100’x1” hose & nozzle 100’x11⁄2” hose & nozzleHOSE REEL ELECTRIC: 50’x1” 12 volt rewind (Pages 31 & 46) 50’x11⁄2” 12 volt rewind 100’x1” 12 volt rewind 100’x11⁄2” 12 volt rewindSUCTION FILL: Self load plumbing with suction hose & strainer/foot valve

(Page 46)

ARTICULATED SIDE SPRAY: Air articulated side spray (Page 45)

CENTER SPRAY: Front or rear center sprays

MONITORS: Manual 21⁄2” (Page 33) 12 volt remote control (Pages 33 & 34)

HOSE TUBES: Built into fenders with closing door A

TOOL HOLDER: Tool holders mounted on tank front or rear tank head B

TANK BASKET: Storage basket on rear or top of tank C

HOSE TRAY: Hose tray fenders D

TOOL BOX: Frame or rear tail mounted lockable tool boxes E


PLUMBING KIT

PLUMBING KITS INCLUDE:WATER PUMP: Berkeley or Western 4x3 centrifugal cast iron pump 750GPM @ 75PSI with ceramic mechanical seal.PLUMBING: From tank to water pump and from pump to each spray head. All plumbing provided is schedule 40 steel pipe with groove style flexible fittings.SPRAY SYSTEM: Cab control console for independently operated spray heads,spray heads and nozzles with all the necessary fittings and hardware.

6 Valve Plumbing Kit (2 Rear, 2 Side, 2 Front) 5 Valve Plumbing Kit (2 Rear, 1 Side, 2 Front) 4 Valve Plumbing Kit (2 Rear, 2 Front) 4 Valve Plumbing Kit (2 Rear, 2 Side) 3 Valve Plumbing Kit (2 Rear, 1 Side)

VALVE OPTIONS:AV9030 Air valves (standard): Air to Close, Interchangeable Nozzle OptionsM2410 Air valves: Air to Open, Built-in Adjustable NozzleElectric Valves: BMC 12 volt or 24 voltInline Air Valves: Bermad, Dorot-Netafim, Cla-Valve, UTE

NOZZLE OPTIONS - for AV9030 and Inline valves• Street Flusher Nozzle • Side Spray Nozzle• Adjustable Spray Nozzle• Fan Spray Nozzle

OPTIONS: Hose Reel - Manual or Electric rewind • Suction Fill Plumbing with Hose and Strainer • Water Cannon - Manual or Electric

STANDARD PLUMBING DIAGRAM


PRE-ASSEMBLED PLUMBING KIT

Pre-assembled B4ZRKS self-prime hydraulic drive plumbing kit.Water Pump: Berkeley B4ZRKS or Monarch 4X4

self-prime 600GPM @ 50PSI, the pump is deck mounted.

Hydraulics: Commercial 31 series hydraulics, with motor attached to water pump. Hydraulic tank, filter assembly and relief valve are pre-plumbed. Hydraulic pump is shipped loose.

Spray Heads: Two rear UTEAV9030 independently air operated spray heads, with adjustable nozzles.

Suction fill: Self load plumbing with suction hose and strainer.

Console: Cab control console.

Pre-assembled B3ZRMS hydraulic drivePlumbing kitWater Pump: Berkeley B3ZRMS or Western 4x3

centrifugal 750GPM @75PSI, the pump is deck mounted.

Hydraulics: Commercial 31 series hydraulics, with motor attached to water pump. Hydraulic tank, filter assembly

and relief valve are pre-plumbed. Hydraulic pump is shipped loose.

Spray Heads: Two rear UTEAV9030 independently air operated spray heads, with

adjustable nozzles.Console: Cab control console.

OPTIONS FOR PRE-ASSEMBLED KITSSide spray: Two independently air operated spray

heads front of tank.Front spray: Two independently air operated spray

heads front of truck.Hose reel: Manual rewind hose reel with adjustable

fog nozzle.Engine drive: Diesel engine drive (pictured to right)

(Diesel engine drive plumbing kit)

TANK CONSTRUCTION


Full Welds - Inside & Out

Mounting Skids/Runners

Baffles

Standard Tank FeaturesShape: Modified ellipse with flat sides for low profile.Belly Plate: Full steel belly plate along bottom of 3000 gallon and larger tanks.Construction: Full penetration welds, all seams welded 100% on both sides.Heads: Curved and fitted with 4″ - 6″ offset welded 100% inside and out.Baffle(s): Curved and fitted with 4″ - 6″ offset; 20″ crawl hole and 6″ flow holes on top, sides and bottom.Mounting Skids: Heavy duty U-shaped skids with full continuous weld to tank.Manway: Hinged non-sealing 25″ lid with 10″ anti-slosh ring.Ladder: OSHA approved 3⁄4″ pipe construction, mounted on curb side.Sight Gauges: Clear flexible tubing mounted on front and rear of tank.Light Brackets: Standard DOT: marker, stop and clearance; sealed beam lights.Fenders: Welded to tank, constructed from 12 gauge steel.

Tank Dimensions and Capacities SK 41.5 96 170 SH 51 80 178 SE 53 88 204 SC 53 96 227 SJ 57 96 242 SD 60 96 266 SR 64 102 290 SG ≤16’ 72 102 325 M3 ≥17’ 72 102 325 M4 78 102 385 M5 76 120 425 M6 96 144 590 M7 96 168 691

STYLE HEIGHT WIDTH GALLONS PER FOOT

STANDARD TANK FEATURES, DIMENSIONS & CAPACITIES


WARRANTY & PAINT

FIVE YEAR TANK WARRANTY

Customer satisfaction and quality products are our main focus at United Truck & Equipment. We build our tanks with longevity in mind using only the best materials, such as ASTM A36 steel,100% full welds inside and out (no skip welding), and belly plates on all 3000+ gallon tanks.

We take great pride in our ability to manufacture superior water tanks and proudly back that up with our standard five year tank warranty. From the date of your purchase, we cover against defective workmanship or defective materials for a full five years. (For details see United Truck & Equipment Inc. warranty documentation.)

We want your tank to outlive your truck!

BELLY PLATE

As part of our superior craftsmanship, all of our 3000+ gallon tanks have full belly plates. These plates increase the longevity of the tank by reinforcing the area most affected by stress and vibration. This additional detail is critical for preventing premature cracking and deterioration.

Standard belly plates are constructed with 3⁄16” ASTM A36 steel, running the entire length of the tank and measure 60” across. The belly plates, like all elements of our tanks, are 100% full welds, no skip welding.

PAINT - DUPONT

In our continuing pursuit to offer quality, our paint of choice is DuPont, the industry’s leading brand. All truck frames and plumbing are coated with DuPont enamel, and all tank exteriors are sandblasted and primed.

Options:

Standard DuPont CENTARI® 5000 – Acrylic Urethane Enamel Upgrade DuPont IMRON® 5000 – Polyurethane Enamel - higher solid for increased weather ability. Top of Line DuPont IMRON® 6000 – Polyurethane Enamel - with base and clear coat for longer life and polished look. Interior coating Sandblasted and coated with 20 mils of DuPont high solid epoxy.

Custom colors can be matched with your paint code.


GRAVITY DROP/TANK MOUNTING KIT/MUDFLAPS

dEScrIPTIoN PArT#Gravity drop 2346

(Replacement parts are on the right side of the page.)

Air operated trap door style gravity drop, weld into bottom of tank or flange mount (see flanges on page 25). (Single in-cab control valve)

MOUNTING KIT

MUDFLAPS SKIRTBOARD

TANK SIGHT GAUGE

dEScrIPTIoN PArT#Vulcanized Rubber Pad 2626

GRAVITY DROP

24”

1”

dEScrIPTIoN coNTENTS PArT#Mounting kit 6 tank mnts, 6 frame mnts, 4 springs, hardware 3342Mount kit fasteners 12 bolts, 12 locknuts, 4 washers 2585Tank bolt kit 1- bolt, 1 locknut, 1 washer 6263

dEScrIPTIoN dImENSIoNS PArT#UTE Mud Flap 24” W x 36” L 6071Mud Flap Extensions 6” W x 24” L 12 Gauge steel 2995Anti Sail Mud Flap 24” W x 36” L 3215Bracket for anti sail 22” W x 21” H 4360Hooks for Mud Flaps 3-1⁄2” size 5925

dEScrIPTIoN dImENSIoN PArT#Flexible PVC Clear tubing 5⁄8” cut by the foot 1201Acrylic Clear Tubing 5⁄8” OD ½ ID 5939A. Sight Gauge fitting 5⁄8 x1⁄2 includes insert 1194B. Ferrule 7631C. Insert 7632

Hooks for Mud Flaps

Front ViewSide View

Return Springs

6”

A

B

C

91⁄4”

Air Pot

28”

GRAVITY DROP REPLACEMENT PARTS dEScrIPTIoN dImENSIoNS PArT#Air pot 1035Eye bolt 3⁄8 x 5 2344Coupling nut ½ - 20 1.75 5742Air Pot Spring need 1036Gum rubber 3⁄8” - cut to fit 0100Clevis ½” x ½ “ 1726

21⁄2”


HYDRANT FILLS/QUICK DUMPS/MANWAY

dEScrIPTIoN PArT#10” Quick Valve 226310” Air Articulated Quick Valve SPECIAL ORDER 482110” Electric Quick Valve SPECIAL ORDER 315610” Electric Quick Valve Stainless SPECIAL ORDER 6878Flange 6068Flange Stainless 70454 Bolt Strip 5518

10” Elbow for Quick DumpdEScrIPTIoN PArT#10” Elbow 4307

HYDRANT FILLS

MANWAYStandard manway is 25”

dEScrIPTIoN dImENSIoNS PArT# 21⁄2” PipeA. Hydrant fill 10’ 37” x 51” (inside) 4018A. Hydrant fill 15’ 37” x 81” (inside) 3475B. Hydrant fill t-nut 4815C. Hydrant fill swing spout 10” x 251⁄2” (outside) 3476

Hydrant Fill Kit PArT#

10’ kit 10’ hydrant fill, t-nut, spout, 2 rigid grooved couplings 591015’ kit 15’ hydrant fill, t-nut, spout, 2 rigid grooved couplings 5909

10” Quick Dump and Mounting Flange

dEScrIPTIoN dImENSIoNS PArT#

Manway Ring 25” diameter - 12 gauge 3565Manway Ring 20” diameter mild steel 5012Manway Ring Stainless 20” diameter stainless 4830Inspection Cover 20” cad plated 4831

dEScrIPTIoN PArT#Wrench 2999

dEScrIPTIoN PArT#21⁄2” Tempe/Phoenix 316921⁄2” MNSTXFNPT 426821⁄2” MPXFNST 300221⁄2” MPXMNST 3802

Adjustable hydrant wrench

Fire hydrant adapter

Note: Other adapters in stock. Call with your specifications.

2” Backflow PreventordEScrIPTIoN PArT#2” Backflow Preventer 5563

Hydrant fill strainer with stainless basketSIzE PArT#2 1⁄2” 4293

Bronze check valvedmImESIoNS PArT#21⁄2” Thread 75703” Thread 7624

C

A

B

OTHER MANWAY OPTIONS

dEScrIPTIoN dImENSIoNS PArT#

Lockable Hasp for Manway 4.5” 7016Manway Screen for 25” manway 7481 for 30” manway 5055Vented Sealing Manway 20” diameter 1179

9”

25”

25”

20”

QUICK DUMPS


AIR OPERATED SPRAYHEAD KITS

AV9030 Front and Rear Adjustable Spray Assembly dEScrIPTIoN PArT#A. 3” Nipple Weld x Grove 1486B. 3” Rigid Mount Coupling 0697C. 1⁄8” quick Release Valve 4520D. AV9030 Sprayhead 4117E. 3” Groove Coupling 0687F. Adjustable Spray Nozzle 3484(A-F) Adjust Spray Nozzle Assembly 4038

AV9030 Side Spray Assembly dEScrIPTIoN PArT#A. 3” Nipple Weld x Grove 1486B. 3” Rigid Mount Coupling 0697C. 1⁄8” quick Release Valve 4520D. AV9030 Sprayhead 4117E. 3” Groove Coupling 0687F. Side Spray Nozzle 4069(A-F) Side Spray Nozzle Assembly 4036

BC2403H Hydraulic Sprayhead dEScrIPTIoN PArT#A. BC2403 Hydraulic 7690B. Cap CALLC. Ring 5945D. Knob 6100E. Hydraulic Cylinder 7685F. Mount Nut (not shown) 7686

2410M Spray Head Assembly dEScrIPTIoN NEWPNA. 3” Nipple Weld x Grove 1486B. 3” Rigid Mount Coupling 0697C. 90° Groove Elbow 0677D. 2410M Sprayhead 6204(A-D) 2410M Sprayhead Assembly 4636E Side spray attachment 1040

BC2403 Sprayhead dEScrIPTIoN PArT#A. BC2403 Sprayhead 5826 (does not include F or G)B. Cap 5928C. Ring 5945D. Knob 6100E. O-Ring 4009F 1⁄4” Quick Release Valve 6100G Base Plate 5945A-F-G BC2403 Assembly 6016

A

C

E

F

D

B

A

C

E F

D

B

AC

B

D

B

AA

B

B

C

C

D

D

E

E

F

G

31⁄2”

5⁄16”E

AV9030 “Duckbill” Spray Assembly dEScrIPTIoN NEWPNA. 3” Nipple Weld x Grove 1486B. 3” Rigid Mount Coupling 0697C. 1⁄8” Quick Release Valve 4520D. AV9030 Sprayhead 4117E. 3” Groove Coupling 0687F. Flusher Spray Nozzle 1043F. Fan Spray Nozzle 1048F. Side Spray Nozzle 1045G. 90° Groove Elbow 0677A-F Fan Spray Assembly 4588A-F Flusher Spray Assembly w/90° 4037A-G Side Spray Assembly w/90° 4718A-G Flusher Spray Assembly w/90° 4843A-G Fan Spray Nozzle Assembly w/90° 5059

A

C

E

F

D

B

G

B


SPRAYHEAD NOZZLES

3” Groove NozzledEScrIPTIoN WEIghT PArT#7”x1⁄4” Slot-Standard Fan Spray 1.6 1048

3” Groove NozzledEScrIPTIoN WEIghT PArT#7”x 3⁄32” Slot Flusher Nozzle 1.6 1043

3” Groove NozzledEScrIPTIoN WEIghT PArT#Adjustable Pattern & volume 2.6lb 3484Band .56 3305

Groove 90° Elongated Aluminum ElbowdEScrIPTIoN WEIghT PArT#Elbow for 3” Slip on Nozzles 2.5 7270

3” Groove NozzledEScrIPTIoN WEIghT PArT#4”x1⁄4” Slot Side Spray Nozzle 2.0 4069

3” Fin Side Spray with 2” Reduced FlowdEScrIPTIoN WEIghT PArT#51⁄2” x 5⁄16” Slot Side 2.6 7017Spray Nozzle

Steel Thread Fan Nozzle 2” — 3”SIzE WEIghT PArT#2” 2.00 579121⁄2” 2.50 13513” 2.75 1352

Steel Groove Side Nozzle 21⁄2” — 3”SIzE WEIghT PArT#21⁄2” 3.2 21603” 3.5 1392

Side Spray AttachmentdEScrIPTIoN WEIghT PArT#51⁄2” x 5⁄16” 3.5 lbs. 1040

Steel Threaded Side Nozzle 21⁄2” — 3”SIzE WEIghT PArT#21⁄2” 3.2 13883” 3.5 1389

3” Groove NozzledEScrIPTIoN WEIghT PArT#5”x1⁄4” Slot Side Spray Nozzle 1.6 1045

Adjustable Slip on NozzledEScrIPTIoN WEIghT PArT#Aluminum Cast 31⁄2” 3.0 6117Aluminum Cast 4” 5.3 1053

Flushing Street Cleaning Nozzle 21⁄2”dEScrIPTIoN WEIghT PArT#81⁄2” x 1⁄16” Slot -- Brass 9.25 5426

Flushing Street Cleaning Nozzle 21⁄2”dEScrIPTIoN WEIghT PArT#8” x 3⁄16” Slot -- Brass 12.5 1072

4”

K2207

3-1⁄2”

BBD

Steel Groove Fan Nozzle 2” — 21⁄2” — 3”SIzE WEIghT PArT#2” 2.00 384321⁄2” 2.25 13493” 3.25 1350

ADJUSTABLE NOZZLES

FAN SPRAY

FLUSHERS

SIDE SPRAY

5⁄16”

51⁄2”

73⁄4”73⁄4”

71⁄2”

71⁄2”

31⁄4”31⁄4”

~4”

~4”

3⁄16”

3⁄16”

Band


AIR OPERATED INLINE VALVES/EXTERNAL REPAIR PARTS

Cla-valve ThreadedInline Air Operated Valve 2 & 21⁄2”SIzE PArT#2” 460221⁄2” 5665

Bermad ThreadedInline Air Operated Valve 2” – 3”SIzE PArT#2” 27153” 3035

United ThreadedInline Air operated Valve 3”SIzE PArT#3” 5293

Bermad GroovedInline air operated valve 2” – 3”SIzE PArT#2” 30523” 3034

Bermad ThreadedInline air operated valve 3”SIzE WEIghT PArT#3” 13.5 5776

Aquamatic ThreadedInline Air Operated Valve 21⁄2” - 3”SIzE PArT#21⁄2” 35223” 3591

Dorot 2” ThreadedInline Air Operated Valve 2”SIzE PArT#2” Threaded 47252” Grooved 4907

Dorot 3” ThreadedInline Air Operated Valve 3”SIzE PArT#3” Threaded 4784

Dorot 3”2”3” Threaded or GroovedInline Air Operated Valve 3”x3” Fittings with 2” BodySIzE PArT#323 Threaded 4525323 Grooved 4767

31⁄4”

41⁄2”

5”

31⁄4” 31⁄4” 53⁄4”

77⁄16”

71⁄2”

8”71 ⁄2”9”

83⁄4” 77⁄8” 121⁄2”

2” 313⁄16”

3” 59⁄16”2” 313⁄16”3” 59⁄16”

313⁄16”

2” 71⁄16”

3” 101⁄16”2” 81⁄8”

3” 97⁄8” 81⁄2”

25⁄8” (21⁄2” Valve)23⁄8” (3” Valve)

33⁄8”

61⁄2”

External Parts for AV9030 ValvesdEScrIPTIoN PArT#A. Sprayhead cap 7132B. Clamp 1038C. Body 6619

External Parts for Master-Dorot ValvesdEScrIPTIoN PArT#A. Replacement Cap for 3” Master Valve 5374B. Replacement Cap for 2” and 323 Dorot Valves 5046

External Parts for 2410M ValvesdEScrIPTIoN PArT#A. Sprayhead cap 7132B. Clamp 1038C. Adjustable Band 1074D. 2410M Body 7226

A A

C

C

D

B B


INTERNAL REPAIR PARTS FOR AIR OPERATED VALVES

Bermad Internal Valve KitdEScrIPTIoN PArT#2” Spring 29762” Diaphragm 29773” Spring 38483” Diaphragm 38473” Retainer Discontinued3” Reduced flow diaphragm 46143” Reduce flow spring 1079

BC2403 Valve Internal Valve KitdEScrIPTIoN PArT#A Spring 4008B Diaphragm 1077C Kit 6017

ExTrAPArTSforhydrAUlIcVAlVEJam nut 3266Hex nut 3267

AGM InternalValve KitdEScrIPTIoN PArT#Complete Kit Diaphragm 7362Seat 7682

dEScrIPTIoN PArT#A Spring 1570B Top disc retainer 1574C Diaphragm 1578D Disc retainer 1572E Disc gasket 1575F Guide disc nut 1573G Thread stem 6690 A-G Assembled kit 2745

dEScrIPTIoN PArT#A Diaphragm 1076B Spring 1079C Stem (Stainless) 1394D Ball Seat 1073E Rubber Washer 5008F 71A Fastener Kit 3265A-F Kit 4065

dEScrIPTIoN PArT#2” Spring 50322” Repair kit (spring not included) 495521⁄2” Diaphragm 553321⁄2” Spring 157021⁄2” Repair kit (includes spring) 60253” see Master below

United, Cla-valve & Klein3” inline valve parts

dEScrIPTIoN PArT#A Spring 1056B Aluminum Assembly 6720 C Diaphragm 3106D Black Ball Seat 4116A-D Assembled Kit 4373

AV9030 internal valve parts

2410M internal valve parts

Cla-valve kit

A

C

E

F

F

G

D

B

A

C

D

B

B

B

A

C

D

B

Dorot Internal kit3” Full Flow Valve

Please measure diaphragm for accuracy -- note 3” full flow rare

dEScrIPTIoN dImENSIoN WEIghT PArT#A Diaphragm, Netafim 3⁄16” x 53⁄4” .34 1587B Button Seat, Netafim .05 4952C Spring, Netafim .34 1589

Dorot Internal kit2” Valve and 3” Reduced Flow Valve

Please measure diaphragm for accuracy -- note 3” full flow rare

dEScrIPTIoN dImENSIoN WEIghT PArT#A1 Diaphragm, Netafim 1⁄8” x 31⁄4” .22 1585A2 High Pressure Diaphragm, Netafim 1⁄4” x 31⁄4” .24 5590B Button Seat, Netafim .02 3883C Spring, Netafim .06 1588

E

2977=41⁄4”3847=61⁄8”4614=43⁄4” 8”

61⁄4”

63⁄4”

A1 1⁄8” Thick StandardA2 1⁄4” Thick HP

2” Valve and 3” Reduced Flow Valve - see page 19 for valves.

31⁄4”

B

C

3” Full Flow ValveSee part 4784, page 19

3⁄16” Thick

53⁄4”

B

A

C

Diaphragm


ELECTRIC/AIR OPERATED VALVES AND ACTUATORS

Wafer ButterflySIzE dEScrIPTIoN PArT#21⁄2” Wafer Butterfly 12v Electric Actuator 49233” Wafer Butterfly 12v Electric Actuator 45524” Wafer Butterfly 12v Electric Actuator 59864” Wafer Butterfly 24v Electric Actuator 6005

A

C

B

D

B

Groove Butterfly 12v Electric ActuatorSIzE PArT#21⁄2” 55613” 5148

12/24V Actuated Valve 21⁄2” – 4”12/24V Actuated Valve 21⁄2” – 3”

ELECTRIC OPERATED VALVES

AIR OPERATED BUTTERFLY VALVES

ACTUATORS

Wafer Butterfly Air Actuated Valve 6”SIzE dEScrIPTIoN PArT#6” 1529

12V/24V Actuator for 4” Butterfly ValvesdEScrIPTIoN PArT#Actuator, 12V (4” Valve) 7060Actuator, 24V (4” Valve) 6004

Air Actuator for Butterfly Valves 2” - 5” (Grooved 4” - 5”)dEScrIPTIoN PArT#Air Actuator, 2” - 3” 1503Air Actuator, 4” - 5” 1504

Groove Butterfly Air Actuated Valve 21⁄2” – 4”SIzE dEScrIPTIoN PArT#21⁄2” 48683” 33794” (Pictured) 4447

12V/24V Bracket/Coupler for Electric ActuatordEScrIPTIoN PArT#Bracket/Coupler for 12V/24V Actuator 4397

Air Actuator Brackets for Butterfly Valves 2” - 5”dEScrIPTIoN PArT#Bracket for Part# 1503 3814Bracket for Part# 1504 3815

Air Actuator for 6” Butterfly ValvesdEScrIPTIoN PArT#Air Actuator for 6” butterfly valve 4003Bracket 4367Repair kit 4956

Wafer Butterfly Air Actuated Valve 2” – 5”SIzE dEScrIPTIoN PArT#2” 467021⁄2” 50353” 21834” 44455” 4446

12V Electric Actuator for 2” - 3” Butterfly ValvesdEScrIPTIoN PArT#Actuator, 12V 2”-3” Valves 4396

Note: Some modifications of valve stem may be required.

BMC Spray Head Assembly dEScrIPTIoN NEWPNA. 3” Nipple Weld x Grove 1486B. 3” Rigid Mount Coupling 0697C. 90° Groove Elbow 0677D. Bertolini 12v BMC 4875 Bertolini 24v BMC (not pictured) 6008(A-D) 2410M Sprayhead Assembly 12v 5251


MANUAL VALVES

Nibco Air Actuator 21⁄2”-3” Grooved Butterfly ValvesdEScrIPTIoN PArT#Actuator for Nibco valve 21⁄2” - 3” 6341

Actuator BracketdEScrIPTIoN PArT#Bracket for Part #6341 6343

12V Electric Solenoid

dEScrIPTIoN dImENSIoN WEIghT PArT#12V Electric Solenoid, replacement for BMC 0.63 551024V Electric Solenoid 0.63 7480

Hose BibSIzE WEIghT PArT#3⁄4” 0.60 1552

Ball ValveSIzE WEIghT PArT#1⁄4” 0.34 33773⁄8” 0.54 15091⁄2” 0.59 15103⁄4” 0.62 15111” 0.94 173711⁄4” 2.13 367611⁄2” 2.22 15142” 3.35 151621⁄2” 4.55 15183” 7.07 22434” 10.23 3526

Gate ValveSIzE WEIghT PArT#1⁄2” 0.61 57963⁄4” 0.89 66331” 1.07 154411⁄4” 1.49 154511⁄2” 2.00 15462” 3.33 154721⁄2” 5.96 26443” 8.05 1549

Lug Butterfly ValveSIzE WEIghT PArT#2” 9.5 706621⁄2” 11.5 49823” 12.0 15244” 18.0 32646” 27.0 5289

Wafer Butterfly ValueSIzE WEIghT PArT#2” 8.5 152121⁄2” 10.5 43173” 11.0 26574” 14.0 15255” 17.5 34956” 21.0 268610” 56.0 279812” 90.0 4210

Groove Butterfly ValveSIzE WEIghT PArT#2” 3.5 568421⁄2” 8.0 44903” 7.0 35984” 12.5 36065” 18.0 27016” 37.0 4874

Drain ValveSIzE PArT#1⁄4” 7626

Lever Gate ValvedEScrIPTIoN WEIghT PArT#3” Lever Gate 8.5 29194” Lever Gate 14.0 1594

Piston Gate ValveSIzE WEIghT PArT#4” Piston Gate 8.5 15956” Piston Gate 20.5 3285

ACTUATORS

MANUAL VALVES


CONTROLS FOR AIR, ELECTRIC AND MANUAL

Stand for Monitor JoystickdEScrIPTIoN dImENSIoNS PArT# hEIghT I.d.boxStand for monitor 13.5” 5 3⁄4“ x 5 3⁄4“ 7295 joystick

UTE Control ConsoledEScrIPTIoN PArT#2 Switches 39443 Switches 27284 Switches 26955 Switches 27296 Switches 27257 Switches 40508 Switches 4051

Bracket for Monitor Toggle BoxdEScrIPTIoN dImENSIoNS PArT#Bracket for monitor box 6924

Six Switch Console Pictured

Stand only - joystick sold separately

A

H

E FD

C

G

B

I

Manual Control Butterfly Valve (21⁄2” Groove pictured)dEScrIPTIoN SPEcS WEIghT PArT#A. Control Lever Used for 1⁄4” cable w/3” TRVL 3.94 4458B. Lever Plate See diagram 1.20 4459C. Control Base (1 pc. not a set) See diagram 2.97 4475D. 84”Cable 1⁄4” - 28 threads 2.56 4469D. 96” Cable 1⁄4” - 28 threads 2.70 4470E. Cable Clevis 1⁄4” x 5⁄16” 0.15 4460F. Valve Lever 31⁄2” x 11⁄2” 0.15 4476G. Manual Control Pipe 1⁄2” ID x 1” 0.06 2018H. 21⁄2“ Grooved Butterfly Valve 7.76 4490I. Valve Bracket - Left See diagram 1.24 4477I. Valve Bracket - Right See diagram 1.24 4478A-I Assembly with one valve - 84” cable left side bracket 20.00 6546A-I Assembly with one valve - 84” cable right side bracket 20.00 6548A-I Assembly with one valve - 96” cable left side bracket 22.00 6547A-I Assembly with one valve - 96” cable right side bracket 22.00 6549

UTE Control ValvesdEScrIPTIoN PArT#A - 1 way valve 1493B - 2 way air valve 1494C - 2 way push/pull 3375D - 2 way momentary 1492E - 3 way toggle 6029E - 4 way toggle 6028

A

A

C

C

D

B

B

D

E

dEScrIPTIoN PArT#A. Rocker Switch, green LED light 7635A. Rocker Switch, red LED light 7634B. PTO switch 0898C. Electric over air 12V 3028D. Electric over air 24V 6625

Electric Switches

111⁄2”

81⁄2” 21⁄2”

11⁄2”

21⁄2”

63⁄4”

10”

Air CylinderdEScrIPTIoN PArT#6” Stroke 150010” Stroke 3904

7 3⁄4”

51⁄2”

31⁄8”


AIR LINE FITTINGS

AIRLINE AND FITTINGS

Branch Tee 1⁄4 x 1⁄8 x 1⁄4SIzE PArT#1⁄8” Thread 1⁄4” Hose 5548

UnionSIzE PArT#1⁄4” Hose 5894

Male Run TeeSIzE PArT#1⁄8” Thread 1⁄4” Hose 5545

Brass NippleSIzE PArT#1⁄8” x 1⁄4” 7644

Quick Exhaust ValveSIzE PArT#1⁄8” 45201⁄4” 6100

Brass BushingSIzE PArT#1⁄8” x 1⁄4” 7642

Adjust. Regulator & BracketdEScrIPTIoN WEIghT PArT#Regulator with 1⁄4” ports 0.63 1597Regulator bracket 0.10 2885

Brass PlugSIzE PArT#1⁄8” 76381⁄4” 7639

Air VentSIzE WEIghT PArT#Female 1⁄4” x male 3⁄4” 1.23 4112

Brass NippleSIzE PArT#1⁄8” 7643

Pressure Protection ValveSIzE NomINAlPSI PArT#1⁄4” x 1⁄8” Ports 70 6673

Push-On TeeSIzE PArT#1⁄4” Hose 7160

1⁄4” Airline HoseSIzE WEIghT PArT#25’ Roll 0.3 4255100’ Roll 1.2 0487

Male Swivel ElbowSIzE PArT#1⁄8” Thread 1⁄4” Hose 5547

Male ConnectorSIzE PArT#1⁄8” Thread 1⁄4” Hose 5546

13⁄4”

1”

11⁄2”

11⁄8”

5⁄8”

1⁄4”

17 ⁄8”

15⁄8”

3⁄4”

13⁄8”1”


ELBOWS & FLANGES

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs2” 43⁄8 43⁄8 1.90 06752 1⁄2” 51⁄5 51⁄5 2.77 06763” 515⁄16 515⁄16 3.77 06774” 7 1⁄4 7 1⁄4 7.39 06785” na na 11.28 2988

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs3⁄4” 2 2 0.25 747011⁄2” 3 3 1.07 33842” 33⁄4 33⁄4 1.84 124721⁄2” 41⁄2 41⁄2 2.80 12483” 51⁄2 51⁄2 4.29 12494” 61⁄2 61⁄2 7.30 3278

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs21⁄2” 51⁄8 51⁄8 2.85 07103” 53⁄4 713⁄16 6.59 0711

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs2” 41⁄4 41⁄4 1.80 681021⁄2” 3 3 1.86 48323” 55⁄8 55⁄8 2.72 06734” 7 7 5.46 2458

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs11⁄2” 31⁄3 35⁄16 0.79 16242” 41⁄8 41⁄8 1.50 162521⁄2” 43⁄16 43⁄16 3.22 162621⁄2”SR 4” 4” 1.87 16273” 61⁄4 61⁄4 4.61 16283”SR 43⁄4” 43⁄4” 3.25 16294” 81⁄8 81⁄8 8.13 16314”SR 6 6 5.95 16325” 101⁄5 101⁄5 15.73 16336” 121⁄3 121⁄3 22.88 4679

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs21⁄2” 43⁄4 43⁄4 2.08 07103” 61⁄2 61⁄2 4.78 0711

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs11⁄2” 33⁄16 33⁄16 1.31 33842” 35⁄8 35⁄8 2.09 124721⁄2” 41⁄2 41⁄2 3.30 12483” 55⁄16 55⁄16 4.93 12494” 69⁄16 69⁄16 8.97 3278

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs11⁄2” 23⁄4 23⁄4 0.80 677721⁄2” 41⁄4 41⁄4 1.54 16163” 5 5 2.52 16184” 61⁄4 61⁄4 4.62 16205” 7.54 16216” 91⁄2 91⁄2 11.01 3986

Groove Elbow (90°)Cast Iron

Threaded Female (45°)Malleable Iron

Groove by Thread (90°)Cast Iron

Weld Fitting (90°)SCH 40 Black Steel

Threaded Female (90°)Malleable Iron

A

B

A

B

A

B

A

B

A

B

Groove Elbow (45°)Cast Iron

A

B

A

B

Groove by Thread (45°)Cast Iron

Weld Fitting (45°)Sch 40 Black Steel

45° ELBOWS 90° ELBOWS

SR - Short Radius

A

B

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs1⁄2” 17⁄16 21⁄4 0.25 68633⁄4” 13⁄4 25⁄8 0.43 21111” 21⁄16 31⁄16 0.65 229111⁄4” 21⁄2 35⁄8 0.95 131311⁄2” 27⁄8 315⁄16 1.33 13142” 35⁄16 43⁄4 2.67 131521⁄2” 4 53⁄4 3.85 13163” 413⁄16 611⁄16 5.47 13174” 57⁄8 8 3⁄4 9.18 5017

Threaded Street (90°)Malleable Iron

A

BA

B

FLANGES

SIzE mEASUrEmENT WEIghT PArT# boltholes b(in) lbs2” 4 33⁄8 4.25 125821⁄2” 4 4 5.85 12593” 4 41⁄4 7.35 12604” 4 3 12.00 12615” 8 33⁄8 15.15 46646”* 8 33⁄4 16.55 3549* Black Steel

Threaded Companion FlangeMalleable Iron

B

SIzE mEASUrEmENT WEIghT PArT# boltholes b(in) lbs2” 4 33⁄8 4.25 163921⁄2” 4 4 7.70 16403” 4 41⁄4 8.80 16413”* 4 41⁄4 8.75 67743” x 4” 8 41⁄4 15.19 16504” 4 3 12.70 16425” 8 33⁄8 14.00 16446” 8 33⁄4 16.40 1645* Flat Faced

SIzE WEIghT PArT# lbs1⁄2” 0.14 12663⁄4” 0.18 12671” 0.20 126811⁄2” 0.45 12702” 0.47 12713” 1.10 12734” 1.83 1274

Weld Flange FittingSch 40 Black Steel

Threaded Phx FlangeMalleable Iron

B


TEES, CROSSES, REDUCERS, & CAPS/PLUGS

TEES

CROSSES

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs21⁄2” 5 71⁄2 5.15 07153” 5 7⁄8 87⁄16 7.00 07164” 7 10 10.50 0717

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs2” 35⁄8 5 2.38 166521⁄2” 43⁄8 6 4.19 16663” 51⁄4 63⁄4 6.08 16674” 63⁄8 81⁄4 10.13 1668

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs1⁄2” 15⁄8 21⁄4 0.52 68603⁄4” 2 211⁄16 0.67 321711⁄2” 31⁄4 33⁄4 1.68 13192” 41⁄4 43⁄8 2.49 66892 1⁄2” 41⁄2 51⁄4 5.02 13213” 51⁄4 6 ⁄4 6.82 13224” 61⁄2 73⁄8 11.69 1323

Groove TeeCast Iron

WeldSch 40 Black Steel

ThreadMalleable Iron

A

B

A

B

A

B

A

B

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs3” 87⁄16 87⁄16 9.71 1738

Groove CrossCast Iron

A

B

SIzE hEIghT(A) WEIghT PArT#3” x 2” 3” 1.81 16563” x 21⁄2” 3” 2.03 16574” x 3” 4” 3.24 16585” x 3” 5” 5.62 16595” x 4” 5” 5.60 6227

SIzE WEIghT PArT#1” x 3⁄4” 0.18 26481 1⁄4” x 1” 0.29 2462

SIzE WEIghT PArT#11⁄2” x 3⁄4” 0.61 501911⁄2” x 1” 0.49 27662” x 11⁄2” 0.70 173321⁄2” x 11⁄2” 1.36 296521⁄2” x 2” 0.84 12083” x 2” 1.77 12103” x 21⁄2” 1.52 12114” x 3” 3.19 3329

Weld BellSch 40 Black Steel

Thread BushingMalleable Iron

REDUCERS

A

SIzE hEIghT(A) WEIghT PArT#3” x 21⁄2” 21⁄2” 1.51 07134” x 3” 3.20 70415” x 4” 31⁄2” 4.20 0714

Groove by GrooveCast Iron

SIzE hEIghT(A) WEIghT PArT#3” x 2” 21⁄2” 1.21 07073” x 21⁄2” 21⁄2” 1.30 2419

SIzE hEIghT(A) WEIghT PArT#11⁄2” x 1” 21⁄4” 0.50 485021⁄2” x 11⁄2” 31⁄2” 0.71 475921⁄2” x 2” 31⁄2” 2.55 39783” x 2” 31⁄2” 3.35 45283” x 21⁄2” 33⁄4” 4.49 12424” x 3” 41⁄2” 5.40 5357

Threaded BellMalleable Iron

SIzE WEIghT PArT# lbs2” 0.5 480421⁄2” 1.0 06823” 1.25 06834” 2.5 4783

dEScrIPTIoN WEIghT PArT#A 3” Grooved cap 1.25 1359B 3” with 3⁄4” outlet 1.30 6612C 3” with 11⁄2” outlet 0.93 7337

SIzE WEIghT PArT#11⁄2” 0.58 12202” 1.30 172821⁄2” 0.93 12213” 2.32 1222

SIzE WEIghT PArT#11⁄2” 0.50 13092” 0.77 347121⁄2” 1.19 55533” 1.73 1310

Groove CapCast Iron

UTE Groove Cap (A) UTE Bib Cap (B)Sch 40 Black Steel

Thread CapMalleable Iron

Threaded PlugMalleable Iron

A

B

CAPS/PLUGS

A

B

A BGroove by ThreadCast Iron

A

A

A

Thread Bushing - continued


NIPPLES & COUPLERS

NIPPLES

SIzE WEIghT PArT#I.d. o.d. length lbs11⁄2” 17⁄8 3 0.75 21282” 21⁄4 3 1.00 275121⁄2” 23⁄4 3 1.75 12983” 31⁄2 3 2.00 12994” 41⁄2 3 2.50 4000

SIzE WEIghT PArT#I.d. o.d. length lbs11⁄2” 17⁄8 3 1.00 22232” 21⁄4 3 1.00 468621⁄2” 23⁄4 3 1.50 14853” 31⁄2 3 2.00 14863” x 8” 31⁄2 8 5.00 30954” 41⁄2 4 4.00 27474” x 7” 41⁄2 7 6.00 19585” 53⁄4 4 4.00 52956” 63⁄4 6 8.50 4495

SIzE WEIghT PArT#I.d. o.d. length lbs11⁄2” 17⁄8 3 0.50 33192” 21⁄4 3 0.55 332021⁄2” 23⁄4 3 0.75 14883” 31⁄2 3 1.50 14894” 41⁄2 3 2.73 4134

Thread by Groove NipSch 40 Black Steel

Groove by Weld NippleSch 40 Black Steel

Thread by Weld NipBlack Steel

SIzE WEIghTlbS. PArT#11⁄2” 2.00 06842” 2.00 068521⁄2” 2.20 06863” 3.00 06874” 4.50 06895” 6.00 06916” 8.25 0692

SIzE WEIghT PArT#I.d. o.d. length lbs1⁄2” 3⁄4 11⁄4 0.05 68611” 11⁄8 11⁄2 0.14 176311⁄2” 17⁄8 13⁄4 0.30 12922” 21⁄4 2 0.44 129321⁄2” 23⁄4 21⁄4 0.84 12943” 31⁄2 31⁄2 1.00 12954” 41⁄2 4 1.75 1296

SIzE WEIghTlbS. PArT#2” 2.30 194121⁄2” 3.00 06963” 3.60 06974” 3.60 06986” 8.25 4248

SIzE WEIghTlbS. PArT#2” 2.00 267421⁄2” 3.00 22093” 3.50 06934” 5.30 5987

SIzE lENgTh WEIghT/PArT#I.d. 4” 6” 8” 12”1 ” 0.72/5667 11⁄2” 0.75/4557 ?/65532” 0.94/1277 1.55/1278 0.20/509821⁄2” 2.29/1281 3.06/4450 5.00/12793” 1.80/2505 2.87/1284 4.09/3670 6.38/12834” 4.50/1287 5.68/3999 ?/5047

Groove Coupling (Flexible)

Threaded Close NippleBlack Steel

Groove Coupling (Rigid Mount)

Groove Coupling (Quick Disconnect)

Threaded Nipple with Shoulder - Black Steel

A

B

COUPLINGS

SIzE mEASUrEmENT WEIghT PArT# A(in) b(in) lbs21⁄2” 21⁄4 3 1.17 39963” 2 3 1.49 39383” 3 4 1.88 60203” 33⁄4 41⁄2 2.00 4904

Groove by Notch NipSch 40 Black Steel

SIzE WEIghTlbS. PArT#21⁄2” x 2” 2.80 27503” x 2” 4.50 27643” x 21⁄2” 4.10 06944” x 3” 6.50 0695

Groove Coupling Reducer

SIzE WEIghT PArT#I.d. o.d. length lbs1⁄2” 1” 3⁄4” 0.10 691611⁄2” NA 0.70 12282” 23⁄4” 21⁄4” 1.00 12292 1⁄2” 31⁄4” 31⁄8” 1.25 12303” 4” 31⁄4” 3.00 12313” HALF 4” 13⁄4” 1.50 67054” 5” 35⁄8” 4.50 1233

SIzE WEIghT PArT#I.d. lbs3” 6.15 55234” 6.45 4299

Dresser Pipe Coupling

Threaded Coupler


CAMLOCKS, HOSE BARBS & SWIVELS

SIzE lENgTh WEIghTlbs PArT#11⁄2” 21⁄4 0.30 05672” 21⁄2 0.40 057321⁄2” 23⁄4 0.55 05783” 27⁄8 0.85 05854” 31⁄4 1.50 3205

SIzE lENgTh WEIghTlbs PArT#11⁄2” 3 0.75 05682” 3 0.85 057421⁄2” 31⁄2 1.20 05793” 34⁄5 1.70 05864” 41⁄8 2.20 3327

SIzE lENgTh WEIghTlbs PArT#11⁄2” 47⁄8 0.90 29802” 51⁄2 1.15 264521⁄2” 6 1.50 05803” 63⁄8 2.00 05874” 71⁄4 3.20 3091

SIzE lENgTh WEIghTlbs PArT#11⁄2” 21⁄2 0.75 24062” 27⁄8 0.90 057521⁄2” 3 1.50 05813” 31⁄4 1.75 05884” 35⁄8 2.60 2834

TYPE A: Male cam x female thread

TYPE B: Female cam x male thread

TYPE C: Female cam x hose shank

TYPE D: Female cam x female thread

CAMLOCKS

SIzE ThrEAdo.d. cAmloc 11⁄2” 13⁄4 2 2” 21⁄2 23⁄8 21⁄2” 3 33⁄4 3” 33⁄8 31⁄2 4” 43⁄4 41⁄2

CAMLOC SPECS


TYPE E: Male cam x hose shank



Type V: Female dust cap

TYPE F: Male cam x male thread

HOSE BARBS


SIzE lENgTh WEIghTlbs PArT#1” 37⁄16 0.30 288111⁄2” 41⁄4 0.61 13022” 45⁄8 0.90 130321⁄2” 51⁄2 1.00 13063” 6 2.80 13074” 73⁄16 4.39 30665” 913⁄16 9.20 35216” 11 11.40 5168

SIzE lENgTh WEIghTlbs PArT#21⁄2” 55⁄8 2.17 16523” 57⁄8 2.90 16533” 71⁄4 5.00 4158

SIzE ThrEAdTyPE WEIghT PArT#11⁄2” NPT 0.56 433011⁄2” NST 0.69 426111⁄2” JIC 1.20 51982” NPT 1.06 429121⁄2” NPT 1.24 331421⁄2” NPT 1.34 3315

Hose Shank by SwivelNPT, NST, JIC

Groove by Hose Barb NippleMalleable Steel

Thread by Hose Barb NipMalleable Steel

Weld by hose barb nipMalleable Steel

Style 20 swivelSIzE lENgTh WEIghT PArT# A(in) b(in) lbs11⁄2” 31⁄2 4 1.40 52243” 53⁄4 53⁄4 3.55 10304” 4 6 7.25 5993

Style 30 swivelSIzE lENgTh WEIghT PArT# A(in) b(in) lbs11⁄2” 43⁄16 515⁄16 1.75 56252” 41⁄4 75⁄8 3.00 37054” 6 91⁄2 4.70 3981

Style 40 swivelSIzE lENgTh WEIghT PArT# A(in) b(in) lbs3” 6 123⁄8 5.50 28604” 73⁄4 153⁄4 10.75 3045

A

B

A

B

A

B

SWIVELS


GASKETS/REPAIR KITS/NUTS/BOLTS FOR PLUMBING

GASKETS REPAIR KITS

SIzE WEIghT PArT#3” 0.13 43124” 0.17 43136” 0.23 43148” 0.29 4315

Groove Coupling Reducer Gasket

Gasket for Dresser Couplings

SIzE WEIghT PArT#21⁄2” 0.02 4965

SIzE dEScrIPTIoN WEIghT PArT#11⁄2” for 11⁄2” Plastic Nozzle NST/NPT 0.01 366721⁄2” for 21⁄2” Brass Nozzle NST/NPT 0.03 5980

SIzE dEScrIPTIoN WEIghT PArT#3” Complete 1.00 48963” Flapper insert only 0.09 7608

SIzE WEIghT PArT#21⁄2” 0.11 32383” 0.30 33954” 0.40 6808

SIzE WEIghT PArT#3” 0.14 40784” 0.17 4079

Gasket for NST Swivel

Gaskets for Spray Nozzles

Repair Kits for Foot Valves

Groove Coupling Nut/Bolt

Swivel Repair KitStyle 20-40

SIzE WEIghT PArT#1” 0.05 452111⁄2” 0.07 36002” 0.08 172921⁄2” 0.09 07003” 0.11 07014” 0.21 07025” 0.26 50566” 0.30 1959

SIzE WEIghT PArT#3” x 2” 0.16 50133” x 21⁄2” 0.14 50394” x 3” 0.29 3859

Groove Coupling Gasket

SIzE WEIghT PArT#21⁄2” 0.12 40913” 0.13 23654” 0.18 16495” 0.19 16476” 0.23 1648

Flange gasket

Gasket for Camlock FittingsSIzE WEIghT PArT#11⁄2” 0.03 30202” 0.04 056021⁄2” 0.04 05613” 0.05 05624” 0.07 2971


LIGHTS

dEScrIPTIoN PArT#Tail Lamp Red 3356Tail Lamp Red LED 7368Tail Lamp Red 24V 6055Back Up Lamp 3457Back Up Lamp 24V 6052

dEScrIPTIoN PArT#Marker Red 1934Marker Red LED 5730Marker Red 24V 6053Marker Amber 1933Marker Amber LED 5731Marker Amber 24V 6054

dEScrIPTIoN PArT#A. Rear Bracket 7127

Hort. Rear Bracket (old style) 3719B. Marker Bracket 2085C. Clearance Bracket 2101

dEScrIPTIoN PArT#For Marker Lights 2928For Tail Lights 3354

6-Lamp HarnessdEScrIPTIoN PArT#

6 lamp pig tails, 3 marker pig tails 7373

Truck Adapter dEScrIPTIoN PArT#

Universal 7376Peterbilt 7374Ford 7375

ID Light HarnessdEScrIPTIoN PArT#Triple Marker Pig Tail 138” long 7392

Pig Tail MarkerdEScrIPTIoN PArT#

Single Marker Pig Tail 36” Long 7391Single Marker Pig Tail 90” Long 7390

2 Beam Revolving BeacondEScrIPTIoN PArT#12V, 81⁄4” x 87⁄16” 079524V, 81⁄4” x 87⁄16” 7245

BACK UP STOP/TURN TAIL LIGHTS

WORK/STROBEBEACON/LICENSE LIGHTS

LIGHT BRACKETS

LIGHT HARNESSMARKER LIGHTS

GROMMETS

LED

LED

STANDARD

STANDARD

Weather Proof Rubber work lightdEScrIPTIoN PArT#43⁄4” diam. x 3” depth 6934

Quad Flash StrobedEScrIPTIoN PArT#

12-24V, 8” x 8” 3890

License Plate LightdEScrIPTIoN PArT#Mounts on 2” centers 3518

A

C

B


COX REELS

1” & 11⁄2” Manual Hose Reel oVErAll frAmEhoSESIzE modEl# A(hEIghT) b(WIdTh) c(dEPTh) d(WIdTh) E(dEPTh) WEIghT PArT#1” x 50’ 1175-6-50 261⁄4” 243⁄4” 24” 127⁄8” 201⁄8” 67 39981” x 100’ 1175-6-100 261⁄4” 283⁄4” 24” 167⁄8” 201⁄8” 70 3997

11⁄2” x 50’ 1185-1124 25” 241⁄16” 24” 171⁄16” 223⁄16” 76 632911⁄2” x 100’ 1185-2024 25” 3411⁄16” 24” 241⁄16” 223⁄16” 94 6336

1” & 11⁄2” Electric Motor Driven Hose Reel oVErAll frAmEhoSESIzE modEl# A(hEIghT) b(WIdTh) c(dEPTh) d(WIdTh) E(dEPTh) WEIghT PArT#1” x 50’ 1175-6-50E 261⁄4” 203⁄8” 24” 127⁄8” 201⁄8” 93 63321” x 100’ 1175-6-100E 261⁄4” 243⁄8” 24” 167⁄8” 201⁄8” 96 6953

11⁄2” x 50’ 1185-1124E 25” 263⁄16” 24” 171⁄16” 223⁄16” 102 647111⁄2” x 100’ 1185-2024E 25” 3411⁄16” 24” 241⁄16” 223⁄16” 120 6735

Push Button SwitchdEScrIPTIoN PArT#REEL20876 3882

Solenoid for Electric ReelsdEScrIPTIoN PArT#REEL20877 3881

1-1/2” Swivel dEScrIPTIoN modEl# WEIghT PArT#

Replacement swivel 20288 0.03 3477

Retaining RingdEScrIPTIoN modEl# WEIghT PArT#

Retaining ring (spiral) 20266 0.02 4039Retaining ring 20252 0.01 5025

Circuit Breaker

dEScrIPTIoN PArT#REEL20878 3880

Bearing AssemblydEScrIPTIoN modEl# WEIghT PArT#

Bearing assembly 8166 1.20 6818

Lock Pin (Manual Reels)dEScrIPTIoN modEl# WEIghT PArT#

Locking pin 20843 0.23 3542

Axle AssemblydEScrIPTIoN modEl# WEIghT PArT#

Replacement axle 8169-11.5 10.40 7377

Crank AssemblydEScrIPTIoN modEl# WEIghT PArT#

Replacement crank 8191 2.20 7301

O-Ring KitdEScrIPTIoN modEl# WEIghT PArT#

Replacement kit for 20307 0.03 1012swivel

Washer BearingdEScrIPTIoN modEl# WEIghT PArT#

Washer bearing 20264 0.03 4040

Stationary

REPLACEMENT PARTS FOR 1185 SERIES

B

A C

ED

A C

E

D

B

See Page 46 for hose reels assemblies.


HOSES/NOZZLES/STRAINERS/CLAMPS

FOOT VALVES/STRAINERS

NOZZLES

HOSE CLAMPS

HOSES

Suction Fill hoseSIzE lENgTh WEIghT PArT#3” 15’ 25 40583” 20’ 30 20323” 25’ 37 4769

Hose Reel HoseSIzE lENgTh WEIghT PArT#1” 50’ 28.5 38001” 100’ 48.0 325711⁄2” 50’ 45.0 074411⁄2” 100’ 91.0 0743

3” MPT x female cam lock

Hydrant Fill HoseSIzE lENgTh WEIghT PArT#21⁄2” 15’ 8 519921⁄2” 25’ 10 393221⁄2” 50’ 20 5864

Jet Feed HoseSIzE lENgTh WEIghT PArT#11⁄2” 25’ 6 298111⁄2” 50’ 10 280011⁄2” 100’ 12 53422” 50’ 18 5741

21⁄2” Female NST swivel x female cam lock 11⁄2” MPT x 11⁄2 MPT

SIzE ThrEAdTyPE WEIghT PArT#1” NPT 1.2 313011⁄2” NPT 1.4 107111⁄2” NST 1.4 48002” NPT 2.8 385221⁄2” NPT 7.4 1069

SIzE ThrEAdTyPE WEIghT PArT#1” NPT 0.4 31301” NST 0.4 562611⁄2” NPT 0.2 106811⁄2” NST 0.2 33702” NPT 0.2 512121⁄2” Nozzle Bracket 70983” Nozzle Bracket 7097

Adjustable Brass Fog Nozzle

Plastic Adjustable Hose Nozzle

(from stream to 120°)

Suction Hose Foot ValveThrEAdSIzE WEIghT PArT#3” 8.01 15354” 17.90 1536

Double Bolt ClampSIzE WEIghT PArT#3” 1.59 433431⁄2” 1.85 433541⁄2” 2.11 5123

SIzE WEIghT PArT#11⁄2” 0.10 31272” 0.12 06103” 0.15 061131⁄2” 0.17 0612

Tool for performed clamps 3.02 5503

Suction Hose StrainerThrEAdSIzE lENgTh WIdTh WEIghT PArT#21⁄2” 95⁄8 3 3⁄8 1.5 26063” (3⁄8” holes) 5 3 7⁄8 3.0 10843” 95⁄8 4 1.8 10854” (SQ holes) 53⁄16 6 7⁄8 3.1 1086

T-Bolt ClampSIzE WEIghT PArT#21⁄4” 0.15 424721⁄2” 0.15 537023⁄4” 0.15 53713” 0.15 460831⁄2” 0.15 462041⁄2” 0.18 5506

Punch Clamp Tool

Preformed Clamp

Must have banding tool

SIzE ThrEAdTyPE WEIghT PArT#11⁄2” NPT 1.0 285211⁄2” NST 1.0 53302” NPT 1.8 448621⁄2” NST 2.4 1066

Brass Straight Stream Nozzle


WATER MONITOR/CANNON

Sidewinder 2” 12 & 24 Volt Electric Water Monitor (Cannon)dEScrIPTIoN WEIghT PArT#12 volt monitor (no nozzle/no control) 18 524724 volt monitor (no nozzle/no control) 18 730912 volt monitor w/nozzle & toggle control 21 351624 volt monitor w/nozzle & toggle control 25 455312 volt monitor w/nozzle & joystick 21 612324 volt monitor w/nozzle & joystick 25 6115

Remote fog nozzle - 350 GPM

Elkhart Electric Nozzle 350 GPMmodEl VolTS WEIghT PArT#5000-24 12 3.5 49875000-24 24 3.5 7310

2.5” NST Stack Call13⁄8 - 11⁄2” - 13⁄4” - 2” Discharge

dEScrIPTIoN PArT#3” Flange base 6103

Model ST-194 for Vulcan

Base for Vulcan Monitor

Vulcan Manual Water Monitor (Cannon)dEScrIPTIoN PArT#Manual monitor 5809Cone nozzle 1066Manual monitor w/cone nozzle 6550

1.5” NST Tip 44881” Discharge 4.5” Length Call

Model 187A for Sidewinder

1.5” NST Stack Call1.5” & 1” Discharge Call

Model ST-185A for Sidewinder

REMOTE CONTROL MONITORS

MANUAL MONITORS

Joystick ControlmodEl# WEIghT PArT#81172001 5.6 4713Stand 3.8 7295

Toggle Control BoxmodEl# WEIghT PArT#81122001 1.25 4712Bracket 6924

3”

21⁄2” NST


PARTS FOR MONITORS/CANNONS

Elkhart Motor for 5000-24 NozzlemodEl VolTS WEIghT PArT#81186001 12 1.6 663181227021 24 1.6 CALL

Motor AssembliesdEScrIPTIoN VolTS modEl# WEIghT PArT#Up/Down (slow) 12 81119001 1.7 5061Left/Right (fast) 12 81147000 1.7 5030Up/Down (slow) 24 8120700 1.7 6891Left/Right (fast) 24 8124001 1.7 CALL

Motor Control HarnessmodEl# lENgTh PArT#3683300 86” 665936833100 standard 7149

3 Harness from Control (Toggle/Joystick to Module)lENgTh modEl# PArT#12’ 36787000 533250’ 36795000 6135

1 Extension from Monitor Harness Plug to Control ModulelENgTh modEl# PArT#5’ 36791200 694530’ 36791000 5707

2 Control Module AssemblymodEl# WEIghT PArT#81206000 1.5 5808

Sidewinder - Call for Repair Parts

1

2

3

See Page 46 for monitor assemblies.


HYDRAULICS

Waterman 12-Volt Hydraulic Control ValvedEScrIPTIoN WEIghT PArT#3000 PSI Normally Open 3.75 0767

Commercial 31 Series Hydraulic MotordEScrIPTIoN WEIghT PArT#11⁄2” Gear 38lbs. 7959

Pitts 12 Volt Electric Clutch & BracketdEScrIPTIoN WEIghT PArT#Pitts clutch 26.5lbs 0112Pitts bracket 10.5lbs 0111

Commercial 31 Series Hydraulic PumpdEScrIPTIoN WEIghT PArT#2” Gear 42lbs. 804313⁄4” Gear 42lbs. 8042

Hydraulic Relief ValvedEScrIPTIoN WEIghT PArT#Valve 2.25lbs 1015

Hydraulic Filter AssemblydEScrIPTIoN WEIghT PArT#10 micron 4.00lbs 2248Filter (alone) 2.25lbs 0815

Manual Hydraulic Flow Control ValvedEScrIPTIoN WEIghT PArT#3⁄4” O-Ring 8.25 7358

Berkeley Hydraulic Pump Adapter Bracket & CouplingdEScrIPTIoN WEIghT PArT#Adapter kit (set) 15.00lbs 0916Coupler (alone) 1.75lbs 0946

UTE Hydraulic Oil Tank Reservoir Deck MountdEScrIPTIoN WEIghT PArT#A. 20 Gallon 70lbs 4238B. Cap/Strainer .75lbs 2802C. Gate Valve 2lbs 1546D. Sight Gauge .1lbs 1195E. Filter Assembly 4lbs 2248

UTE Hydraulic Oil Tank Reservoir Frame MountdEScrIPTIoN WEIghT PArT#A. 50 Gallon 163lbs 1366B. Cap/Strainer .75lbs 2802C. Gate Value 2lbs 1545D. Sight Gauge .1lbs 1195E. Filter Assembly 4lbs 2248

A B

C

E

D

A

B

E

D

C

Monarch Hydraulic AdapterdEScrIPTIoN WEIghT PArT#Hydraulic Adapter MIH40 18lbs 6207Coupler MIH40 2lbs 5943

Western Hydraulic AdapterdEScrIPTIoN PArT#Hydraulic Coupler for 349M seriesSAEB 7151SAEC 7190


PTOS/HYDRAULICS

dEScrIPTIoN

Hydraulic pump Commercial Shearing 31 Series11⁄4” Gate valve20-50 Gallon oil tankHycon filter3⁄4” high pressure hose FC410 2250 PSI maxoperating pressurePitts clutch (optional)Relief valveBerkeley hydraulic adapterHydraulic motorBerkeley or Monarch water pump3⁄4” Return line 750 PSI max operating pressureSuction line 11⁄4” 350 PSI max operating pressureDrive shaft 1310Waterman valve 12v (optional)

Engine/Hydraulic Drive Water Pump System

A

C

E

D

B

G

I

J

K

L

M

H

F

dEScrIPTIoN

Hydraulic pump Commercial Shearing 31 Series11⁄4” Gate valve20-50 Gallon oil tankHycon filter3⁄4” high pressure hose FC410 2250 PSI maxoperating pressure“K” mount PTORelief valveBerkeley hydraulic adapterHydraulic motorBerkeley or Monarch water pump3⁄4” Return line 750 PSI max operating pressureSuction line 11⁄4” 350 PSI max operating pressure

PTO/Hydraulic Drive Water Pump System

A

C

E

D

B

G

I

J

K

L

H

F

N

Heavy duty 2 gear Chelsea PTO*Call with your transmission model.

A

C

E

D

B

I

J

K

L

M

H

F

N

A

G

A

C

E

D

B

I

J

K

L

H

F

G

Yokes & U-Joints for 1310 Series DrivelineEnd YokesdImENSIoNS WEIghT PArT#11⁄8” x 1⁄4” key (Berkeley/Monarch) 1.45 370411⁄4” x 5⁄16” key (PTO) 1.7 088511⁄2” x 3⁄8” key (Western) 1.8 7169

U-JointU-Joint for 1310 series 1.12 0902

End Yokes

U-Joint


PUMP ROTATION GUIDE

FIRST TIME USE

PACKING: Starting new pump.Before starting pump for the first time, loosen gland nuts and retighten finger tight. Once running allow packing to leak liberally for a few moments. Then tighten gland nuts one complete turn each until leakage is reduced to 40 to 60 drops per minute.

PUMPS WITH MECHANICAL SEAL:Adjustment or maintenance is normally not required. The seal is enclosed within the pump and is self adjusting.

PRIMING:Pump MUST BE completely filled with water when operating.

A self-priming pump only needs to be manually primed at the first start-up. Once primed, under normal conditions pump will re-prime automatically at each subsequent start-up.

To prime, remove plug from top of pump case and fill case with water. Replace plug and start pump. Unit is equipped with a flapper type check valve which will open at start-up and allow pump to evacuate air from the suction line. After several minutes of operation, pump will be fully primed and pumping water. Priming time will vary.


BERKELEY PUMPS

dEScrIPTIoN PrEV.PArTNUmbEr NEWPN

1 Case, Volute (CW) H00689 09411 Case, Volute (CCW) H00698 09422 Impeller (CW) M02153 09482 Impeller (CCW) M02181 09496 Shaft Kit (CW) B80698 09316 Shaft Kit (CCW) B80696 093013 Ring, Packing (Set of 6) S14022 392414 Sleeve, Shaft S05127 291616 Bearing, Ball S13270 314917 Gland, Packing Split S10624 095818 Bearing, Ball S13271 315819 Frame H00553 302522 Locknut M10221 381924 Locknut, Impeller (CW) M10220 314624 Locknut, Impeller (CCW) U36-189SS 437932 Key, 1⁄4x21⁄8” S24255 626040 Slinger, Water S12260 217435 Inner Bearing Cap S19033 096737 Outer Bearing Cap, Assembly S19914 096873 Gasket, Volute S05126 095478 Spacer, Sleeve S08980 0957800A Capscrew, Hex 3⁄8-16x1” (8 Req.) S26826 4543800B Bolt, Sq. Head 3⁄8-16x21⁄2” (2 Req.) S23762 0970802 Nut, Hex 3⁄8-16 (2 req.) S23343 0969805B Washer, Bearing Lock S16181 3818810A Plug, Pipe 1⁄4 NPT (4 Req.) S23715 4542810B Plug, Pipe 1⁄2 NPT S23717 4541811 Fitting, Grease S23670

dEScrIPTIoN PrEV.PArTNUmbEr NEWPN1 Case, Volute (CW) H04040 09441 Case, Volute (CCW) H04041 09452 Impeller (CW) M02153 09482 Impeller (CCW) M02181 09496 Shaft Kit (CW) B80699 33006 Shaft Kit (CCW) B80697 329914 Sleeve, Shaft S39242 100416 Bearing, Ball S13270 314918 Bearing, Ball S13271 315819 Frame H04007 224922 Locknut M10221 381924 Locknut, Impeller (CW) M10220 314624 Locknut, Impeller (CCW) U36-189SS 437932 Key, 1⁄4x21⁄8” S24255 626035 Inner Bearing Cap S19033 096737 Outer Bearing Cap, Assembly S19914 096840 Slinger, Water S12260 217473 Gasket, Volute S05126 095478 Spacer, Sleeve S08980 095789 Seal, Mechanical Shaft S32690 0972800 Capscrew, Hex 3⁄8-16x7⁄8” (8 Req.) S26825 4819805B Washer, Bearing Lock S16181 3818810 Plug, Pipe 1⁄4 NPT (3 Req.) S23715 4542811 Fitting, Grease S23670 816 Ring, Retaining S23009 2173

Model #B3ZRMS

Model #B3ZRM

Model #B4ZRKS


1 Case, Volute H02505 34822 Impeller M08095 21766 Shaft Kit w/Washer & Bolt B80703 46219 Cover, Suction L04108 246114 Sleeve, Shaft S39242 100416 Bearing, Ball S13270 314918 Bearing, Ball S13271 315819 Frame H04007 224922 Nut, Bearing Lock M10221 381924 Nut, Hex Jam M10220 314632 Key, 1⁄4x1” S24168 35 Inner Bearing Cap M10213 300440 Slinger, Water S12260 217451 Seal, Oil M10216 300370 Coupling, Shaft S30636 094671 Bracket, Coupling Kit B07779 091673A Gasket, Case S05126 095473B Gasket, Blind Flange S10364 301078 Sleeve, Spacer S08980 095789 Seal, Mechanical Shaft S32690 0972800A Capscrew, Hex 3⁄8-16x1” (8 Req.) S26826 4543800B Capscrew, Hex 3⁄8-16x11⁄4” (8 Req.) S26828 4826800C Capscrew, Hex 3⁄8-16x3⁄4” (8 Req.) S26824 3005800D Set Screw, Hex 1⁄2” S23964 800E Set Screw, Hex 5⁄8” (2 Req.) S23965 5122800F Capscrew, Hex 5⁄8-11x13⁄4” (4 Req.) S27001 3011802 Nut, Hex 3⁄8-16 S23103 3008804A Weight, Clack S14842 3007804B Weight, Clack S15325 3006805 Washer, Bearing Lock S16181 3818810A Plug, Pipe 1⁄2” NPT S23717 4541810B Plug, Pipe 11⁄2” NPT (2 Req.) S23695 6794811 Fitting, Grease (3 Req.) S23670 816 Ring, Retaining External S23009 2173835 Clack, Rubber L04119 2210850 Flange, Companion S15933 3009

Thread (CW)..... B66161Thread (CCW) .. B66168Groove (CW) .... B66899 Groove (CCW).. B66895

Thread (CW)..... B68414Thread (CCW) .. B68415Groove (CW) .... B68417 Groove (CCW).. B68416

CW (ONLY) ................ B69876W/O Hyd Adapter ..... B69880


BERKELEY PUMPS

Model #B4ERBMS

Model #B6Z

Model #B3JRMBMS


1 Case, Volute H05065 38112 Impeller M04186 09506 Shaft Kit B82184 340313 Ring, Packing (Set of 6) S14022 392414 Sleeve, Shaft S05127 291616 Bearing, Ball S13270 314917 Gland, Packing Split S10624 095819 Frame H00553 302522 Locknut M10221 381926 Screw, Impeller 3⁄8-16x13⁄4” S23572 418932 Key, 1⁄4x21⁄8” S24255 626035 Inner Bearing Cap S19033 096737 Outer Bearing Cap, Assembly* S19914 096840 Slinger, Water S12260 217469 Washer, Impeller S06314 264773 Gasket, Volute S05126 095478 Sleeve, Spacer S08980 0957800 Bolt, Sq. Head 3⁄8-16x21⁄2” (2 Req.) S23762 0970801 Stud, 3⁄8-16x11⁄4” (8 Req.) S23994 4227802A Nut, Hex 3⁄8-16 (8 Req.) S23103 3008802B Nut, Hex 3⁄8-16 (2 Req.) S23343 0969805A Washer, Lock S23036 2694805B Washer, Bearing Lock S16181 3818810 Plug, Pipe 1⁄2 NPT (3 Req.) S23717 4541811 Fitting, Grease S23670

*includes grease fitting and set screw** Mechanical seal S32690 0972

morepumpmodelsavailable.


1 Case, Volute (CW) H01939 41111 Case, Volute (CCW) H01940 48602 Impeller (CW) L06015 44352 Impeller (CCW) L06020 52396 Shaft Kit (CW) B60659 52386 Shaft Kit (CCW) B60660 65197 Ring, Wearing S32745 441511 Retainer, Mechanical Shaft Seal S11452 453114 Sleeve, Shaft S05974 420016 Bearing, Ball S13395 426518 Bearing, Ball S13754 441019 Frame H05508 26 Screw, Impeller 1⁄2-13x11⁄2” S23623 453332A Key, 1⁄2x4” S24214 668832B Key, 1⁄4x11⁄2” S24170 684935 Inner Bearing Cap S13213 586037 Outer Bearing Cap S35277 307340 Slinger, Water S10964 363651 Seal, Oil S14764 441369 Washer, Impeller S18117 486372 Ring, Thrust S19221 441173 Gasket, Balance Ring S09943 402989 Seal, Mechanical Shaft S32693 3917115 Balance Ring L13649 5859119A O-Ring S13760 1936119B O-Ring S24599 4414800A Capscrew, Hex 1⁄2-13x11⁄4” (8 Req.) S26914 800B Bolt, SQ. Head 1⁄2-13x21⁄4” (2 Req.) S23792 4539800C Capscrew, Hex 3⁄8-16x1” (4 Req.) S26826 4543802 Nut, Hex 1⁄2-13x7⁄16” (2 Req.) S23347 3639805A Washer, Lock S23038 4197


1 Case, Volute (CW) H01863 70881 Case, Volute (CCW) H01892 2 Impeller (CW) L03038 40272 Impeller (CCW) L03115 46886 Shaft Kit (CW) B07596 43806 Shaft Kit (CCW) B07597 46877 Ring, Wearing S04176 617911 Retainer, Mechanical Shaft Seal S11452 453114 Sleeve, Shaft S05974 420016 Bearing, Ball S15604 402618 Bearing, Ball S13396 426419 Frame H01838 26 Screw, Impeller 1⁄2-13x11⁄2” S23623 453332 Key, 1⁄2x4” S24214 668835 Inner Bearing Cap S05928 403237 Outer Bearing Cap Assembly S35277 307340 Slinger, Water S10964 363669 Washer, Impeller S06319 427172 Ring, Thrust S06519 435173A Gasket, Volute S06271 402873B Gasket, Balance Ring S09943 402989 Seal, Mechanical Shaft S32693 3917115 Ring, Balance M05073 119 O-Ring S26471 4537800B Bolt, Sq. Head 1⁄2-13x21⁄4” (2 Req.) S23792 4539802 Nut, Hex (2 Req.) S23347 3639

CW (ONLY) ......................B69501w/Square Discharge .........B56372w/Mechanical seal** .........B69500

CW .................. B73023CCW ............... B73027

CW .................. B66924CCW ............... B61999


BERKELEY HYDRAULIC DRIVE WATER PUMPS


1 Volute Case (CW) 300391 09412 Impeller 300389 0948*6 Shaft (CW) 302006 3100*14 Shaft Sleeve 300373 1004*16 Single Row Ball Brg. 302449 3149*18 Double Row Ball Brg. 302450 314819 Bracket 302004 454422 Brg. Lock Nut 302481 381924 Impeller Nut 302480 314635 Drip Brg. Cap 302451 300437 Outer Brg. Cap 302453 404340 Slinger, Water 300558 217451A Lip Oil Seal 302446 3003*51B Lip Seal Oil 302447 3153*72 Thrust Washer 302009 315273 Case Gasket 300385 0954*78 Spacer Sleeve 302448 314789 Mech. Seal 302452 0972800 Cap Screw 350144 4543805B Lock Washer, Brg. 300379 3818*816A Retaining Ring Ext. 302482 2173*816B Retaining Ring. Ext 302484 3150*817 Retaining Ring Int. 302183 3151

* These parts make shaft replacement kit 302485 4347


1 Volute Case (CW) 301098 45292 Impeller (CW) 301097 4423*6 Shaft (CW) 302293 43487 Wear Ring 301101 453011 Retainer, Mech. Seal 302295 4531*14 Shaft Sleeve 300535 4200*16 Bearing, Ball (Inner) 302297 4026*18 Bearing, Ball (Outer) 302296 434919 Bracket 302292 26 Cap Screw (Impeller) 300549 453335 Inner Bearing Cap 302294 453435 Outer Bearing Cap 302305 4535*37 Brg. Shield 302303 40 Slinger, Water 300541 363651A Oil Lip Seal 302302 4196*51B Lip Oil Seal 302304 435069 Shake Proof-Lock Washer 300551 7155*72 Thrust Ring 300542 435173A Case Gasket 300552 402873B Gasket, Balance Ring 300545 402989 Mech. Shaft Seal 302299 3917*115 Balance Ring 303212 119 O-Ring 302300 4537*800A Cap Screw (12) 350283 4538800B Sq. Hd. Bolt (2) 354187 4539801 Stud (4) 302298 4540802A Hex Nut (4) 350025 3008802B Hex Nut (2) 300363 3639805A Lock Washer (Impeller) 301103 4197*816 Retaining Ring 300536 4352817 Retaining Ring 302301 4353

* These parts make shaft replacement kit 302486 4346

Model #B3

Model #B4


1 Case, Volute 300392 38102 Impeller 300388 0950*6 Shaft 302006 3100*14 Sleeve, Shaft 300373 1004*16 Bearing, Ball 302449 3149*18 Bearing, Ball 302450 314819 Frame 302004 4544*22 Locknut 302481 381924 Locknut, Impeller 302480 314635 Inner Bearing Cap 302451 3004*37 Bearing Cap, Outer 302453 404340 Slinger, Water 300558 217451A Seal, Oil 302446 300351B Seal, Oil 302447 3153*72 Ring, Thrust 302009 315273 Gasket, Volute 300385 0954*78 Sleeve, Spacer 302448 314789 Seal, Mechanical 302452 0972801 Stud (8), 3⁄8-16x11⁄2 350144 4543805B Lock Washer, Bearing 300379 3818*816A Ring, Retaining 302482 2173816B Ring, Retaining 302484 3150*817 Ring, Retaining 302083

* These parts make shaft replacement kit 302487 4389Model #B6

CW (ONLY) ...... B69875

CW (ONLY) ...... B69743

CW (ONLY) ...... B70374


BERKELEY HEAVY DUTY “Z” FRAME WATER PUMPS


1 Volute Case (CW) H04040 09442 Impeller M13582 71876 Shaft (CW) M12391 13 Packing Ring (6 Req.) S08281 711014 Shaft Sleeve S05127 291616 Small Ball Bearing M12395 17 Packing Gland S04948 437818 Large Ball Bearing M12394 713919 Bracket M12389 694824 Impeller Nut (CW) M10220 314635 Inner Bearing Cap S19033 096740 Slinger S12260 217472 Washer M12392 711273 Volute Gasket S05126 0954800A 3⁄8-16 x 7⁄8 Capscrew (6 Req.) S26825 4819800B 3⁄8-16 x 11⁄8 Capscrew (2 Req.) S26827 800C 3⁄8-16 Square Hd Bolt (2 Req.) S23762 0970802 3⁄8-16 Hex Nut Brass (2 Req.) S23343 0969810A Pipe Plug 1⁄4 NPT (4 Req.) S23715 4542810B Pipe Plug 1⁄2 NPT S23717 4541816 Bearing Retaining Ring M12486 817 Shaft Retaining Ring M12487


6 Shaft M12338 14 13⁄8 ID x 13⁄4 OD Shaft Sleeve M12422 605816 Single Row Ball Bearing S13395 426518 Ball Bearing S13397 606019 Bracket M12332 617232A Shaft Key, 1⁄4” Sq. x 21⁄4” Lg. - Impeller S23677 419932B Shaft Key, 3⁄8” Sq. x 21⁄4” Lg. S23941 606137 Bearing Cap M12335 40 Water Slinger S10964 363651 Grease Seal (2 Req.) M12337 605969 Lock Washer S06319 427172 Thrust Ring S06519 435173A Volute Gasket S05126 095473B Balance Ring Gasket S09943 4029800A 3⁄8-16 x 1” Lg Hex Hd Capscrew (16 Req.) S26826 4543800B 1⁄2-13 x 1” Lg Hex Hd Capscrew S23619 5386805 Lock Washer S23038 4197811 Grease Fitting (2 Req.) S23700 816B External Retaining Ring S23016 4352

PACKING COMPONENTS13 Packing Ring Set S13435 606217 Split Packing Gland Set B82470 597029 Lantern Ring S19200 6063115B Packing Housing M12334 6240801B 3⁄8-16NC x 21⁄2” Lg Stud (2 Req.) S04438 6239802B 3⁄8-16 Hex Nut (2 Req.) S23343 0969811B 1⁄8 MPT x 90° Grease Fitting S23702

SEAL COMPONENTS89 13⁄4” Mechanical Shaft Seal S32015 4133115A Mechanical Seal Housing M12333 810A 1⁄8” MPT Sq. Hd. Pipe Plug S23714 816A External Retaining Ring S16767 4480

Model #B3ZRM(S)

dEScrIPTIoN PArT#

3X4 (CCW), Rope Packing, Grooved Pump 6816Hydraulic Bracket w/coupler 72053X4 Shaft kit (CCW) 69423X4 Shaft kit (CW) 69433X4 Impeller (CCW) 67363X4 Impeller (CW) 6968

IMPORT WATER PUMP AND PARTS

Model #B3ZRM

CW .................. B80357CCW ............... B80360

Alternative 4X3 CCW water pump. Similar to the B3ZRM with grooved ends and rope packing.

(Berkeley B66895)


WESTERN PUMPS

XS-9 Series Centrifugal PumpsDesigned for frame mounting, hydraulic drive and SAE engine drive

• Heavy Duty Bearing Frame• Rugged 23⁄8” shaft• Hefty 11⁄4” Double Keyed Impeller Mount• Maximized Bearing Life 30,000 hours• Maximum Application Versatility• Space Saving Design

1 Impeller (CCW), 349M 70771 Impeller (CW), 349M 70782- Kit only Shaft kit, 349M 70763 Volute (CCW) VIC, 349M 72803 Volute (CW) VIC, 349M 72814 Bearing Cap w/Grease seal, 349M 73085 Bearing Frame - 9 packing Special Order5 Bearing Frame - 9 seal Special Order6 Impeller washer, 349M 73998 Shaft wear sleeve9 Water slinger10 Impeller bolt, 349M 740011 Impeller star washer, 349M 740118 Snap ring, shaft bearing, 349M 736519 Snap ring mech seal, 349M 736620 Bearing input side21 Bearing - impeller side23 Grease seal, 349M 736424 Thrust ring26 Key for impeller27 Mechanical seal, 349M 707928 Volute gasket, 349M 7287* KIT Bearing kit, 349M 7073** KIT Fastener kit, 349M 7074NOT SHOWN Pump key 3⁄8 X 2.5 7616

* includes #18, #20, #21** includes #6, #10, #11, #17 (12 bolts/lock washer)

Hydraulic Coupler for 349M series SAEB 7151 SAEC 7190

XS9

dEScrIPTIoN PArT#349M PUMP 4X3 (CCW) THREAD PACKING 7063349M PUMP 4X3 (CCW) GROOVE MECH SEAL 6988349M PUMP 4X3 (CW) GROOVE MECH SEAL 7026SAE XS -9 (not pictured)349M ENG DRIVE #5 MECH W/COUPLER 7502

XS-9 349

XS-13

XS-13 Series Centrifugal PumpsDesigned for frame mounting, SAE engine drive, close coupled motor drive with flow rates 300GPM thru 4,000GPM up to 350 ft of head.

• Heavy Duty Bearing Frame• Rugged 21⁄2” Shaft• Hefty 15⁄8” Double Keyed Impeller Mount• Maximized Bearing Life 20,000 Hours• Replaceable Bronze Wear Rings• Bronze Impeller Minimizes Cavitation Damage

dEScrIPTIoN PArT#XS-13 PUMP 3X4X13 CW FLANGE MECH 7517XS-13 ENG DRIVE #3 MECH W/COUPLER 7526


MONARCH PUMPS

modEl dEScrIPTIoN PArT#NT3M9S-CCW-NPT Thread, Mechanical seal, (CCW) rotation 5587NT3M9S-CW-NPT Thread, Mechanical seal, (CW) rotation 7577NT3M9S-CCW-VIC Victaulic, Mechanical seal, (CCW) rotation 6308NT3M9S-CW-VIC Victaulic, Mechanical seal, (CW) rotation 6757 NT3M9P-CCW-NPT Thread, Rope Packing, (CCW) rotation 5588NT3M9P-CW-NPT Thread, Rope Packing, (CW) rotation SONT3M9P-CCW-VIC Victaulic, Rope Packing, (CCW) rotation 5640NT3M9P-CW-VIC Victaulic, Rope Packing, (CW) rotation SO

NT Series - Frame Mount End Suction CentrifugalThe Monarch NT series of frame mount end suction centrifugal pumps are suitable for belt drive, PTO drive, or flex coupled.

- Rugged cast gray iron casing with back pull out design.- Dynamically balanced cast iron impeller- High strength fatigue proof steel shaft- Viton and stainless steel mechanical seal (Gland Packing Available)- Stainless Steel shaft sleeve- Heavy duty deep groove sealed bearings

modEl SIzE SolIdS ShIPWT floWrANgE(gPm) PArT#MIH-40 4” 13⁄8 282 760 5460

MIT Series – Frame Mount Self Priming The Monarch series of heavy duty self priming pumps are of all iron construction and can be used for a wide variety of applications including abrasives, sand, mud, and silt. • Stainless Steel Shaft • Semi-open impeller with replaceable wear plate • Viton and Stainless steel mechanical seal • Cast gray iron casing with large self priming capacity

135⁄8”

233⁄4”

63⁄4”

11⁄8”

modEl# dEScrIPTIoN PArT#1 400260 Casing, Nt3M9S-(CW) Monarch 64201 400262 Casing, Nt3M9S-(CCW) Monarch 74152 400273 Impeller, Nt3M9S-(CW) Monarch 64212 400608 Impeller, Nt3M9S-(CCW) Monarch 68363 190121 Wear Ring, Monarch Nt3 34224 400202 Transmission Head, Monarch Nt3 64235 400203 N0036 Gland-Set, Spl, Monarch 62167 400418 Seal Cover Nt3 73868 426213 End Cover Nt3 12 400247 Shaft, Nt3M9S-(CCW), Monarch 642512 400271 Shaft For Nt3M9-(CCW), Monarch 621713 400197 Washer 642613 400279 Washer 663714 266012 Shaft Sleeve, Monarch 618115 190838 Pump Gasket, Monarch 549916 190849 Flinger 3 X 1.34, Monarch 621817 190851 Gasket 7 X 5.38, Monarch 621918 432082 Key 1⁄4 X 1.25, Monarch 622019 432290 Key 1⁄4 X 2.5, Monarch 622121 240090 Mechanical Seal, Monarch Nt3M9S 618022 432560 Packing 3⁄8 X 3⁄8 6.6, Monarch 622223 110245 Ball Bearing 6307-2R, Monarch Nt3M9 622325 226651 Bolt 1⁄2 X 11⁄2 Lok 642726 119780 Bolt, Nt3M9S-Ccw Monarch 642827 120050 Bolt, Hex Head 3⁄8 Uncx2, Monarch 622428 120238 Bolt, Nt3M9S-(CCW) Monarch 642929 130655 Lock Nut, Monarch 663629 226421 Bolt, Nt3M9S-(CCW) Monarch 643031 185620 Pipe Plug, Monarch Nt3M9S-(CCW) 346132 185640 Pipe Plug, Monarch Nt3M9S-(CCW) 343234 176520 Spring Washer, Monarch Nt3M9S-(CCW) 643435 176530 Spring Washer, Monarch Nt3M9S-(CCW) 3436103 190910 Gasket, Monarch Nt3M9S-(CCW) 6437

Monarch Hydraulic Adapter: see page 35

Monarch MIH40 modEl# dEScrIPTIoN PArT#1 419540 Transmission Head, Monarch 61872 419560 Volute Case, Monarch MIH40 68763 419570 Adapter Plate, Monarch 61884 419590 Impeller, Monarch MIH40 594011 419670 Seal Cover, Monarch 618612 419681 Shaft, Monarch MIH40 40M-212SST 594113 419690 collar, monarch MIH40 741217 419710 Wear Plate, Monarch MIH40 649423 191460 Valve Rubber, Monarch 695525 191480 Pump Gasket, Monarch 632128 240362 Seal, Monarch MIH-40 594229 125795 Impeller Bolt, MIH-40 741133 143980 Cap Screw, 316Ss Hex 3⁄8 - 16 X 3⁄4 737136 148300 Set Screw 5⁄16” X 5⁄8” 735737 110061 Bearing, Monarch MIH40 618338 110800 Locknut, Bearing, Monarch 618439 111200 Lockwasher, Monarch 618553 432160 Key, Monarch 7185

DISCONTINUED

Parts available until factory stock is depleted


ENGINE DRIVE

SUcTdISchmodEl dEScrIPTIoN INP hP ShIPWT PArT#8BSGF-12H Honda, with 6 qt. tank 3”x3” 9 106 5654

BSGF Series – Engine Driven – General Purpose Liquid TransferThe Monarch BSGF series of self priming engine driven pumps are designed for liquid transfer and contractor dewatering.

• Fertilizer resistant Viton Mechanical seal• Semi open cast iron impeller can handle small abrasives• Rugged cast iron casing prevents damage due to water hammer• Available with choice of Honda 9hp engine

HATZ 2M41Z / 3M41Z – LIQUID COOLED 35.8 HP @3000RPM 54.1 HP @3000 RPM• All purpose industrial Diesel engines • Extremely low fuel and oil consumption• Exhaust emission well below all valid limits for operating machines in EU, USA, and Japan• Robust and long lived engine• Low repair cost due to individual cylinders, individual cylinder-heads and individual injection

pumps• Berkeley or Western SAE pumps

JOHN DEERE/PERKINS – 100+ HP LIQUID COOLED ENGINE • With Berkeley or Western @ 1000+ GPM @ 125+PSI High Power & Torque • Single Side Servicing• Natural, Turbo Charged or Turbo Charge-cooled


UNITED ASSEMBLIES

dEScrIPTIoN QTy PArT#A AV9030 Valve 1 4117B 3” Grooved Coupling 2 0687C 3” Nipple Weld x Groove 1 1486D Adjustable Regulator 1 1497E Regulator Bracket 1 2885F 3” Nipple Grooved x Notched 1 6020A-F Complete Assembly 7479

dEScrIPTIoN QTy PArT#A. Side Spray Nozzle 1 4069B. 3” Aluminum Swivel 1 1030C. “U” Clamp 4.5” 1 0615D. “U” Clamp 4” 1 0614E. Air Cylinder 2” X 6” 1 1500F. Clevis 5/8” X 5/8” 1 0181G. Cylinder Bracket 1 1347H. 2-Way Air Valve *page 23 1 1494I. AV9030E 1 4117J. Cylinder Mount 1 3804K. Adjustable Regulator 1 1497L. Regulator Bracket 1 2885M. 3” Nipple Thread x Grooved 2 1299N. 3” Rigid Mount Coupling 2 0697A-N Complete Assembly 5124

dEScrIPTIoN QTy PArT#A Rear Bar 3” X 6 3/4 1 3318B Air Line 25’ roll 2 4255C AV9030 Sprayhead 2 4117D Rear Bar Brackets 2 2005E Adjustable Spray Nozzle 2 3484F 3” Rigid Mount Coupling 2 0697G 3” Groove Coupling 2 0687H 1⁄8” quick Release Valve 2 4520I 90° Elbow Air Line Fitting 5547J Valve Drain 7626K 1 way air valve 2 1493A-K Complete Assembly 7627

dEScrIPTIoN QTy PArT#A Front Bar 3” X 52” 1 3363B Air Line 25’ roll 2 4255C AV9030 Sprayhead 2 4117D Front Bar Brackets 2 2137E Fan Spray Nozzle 2 1048F 3” Rigid Mount Coupling 2 0697G 3” Groove Coupling 2 0687H 1⁄8” quick Release Valve 2 4520I 90° Elbow Air Line Fitting 5547J Valve Drain 7626K 1 way air valve 2 1493A-K Complete Assembly 7628

STrEETflUShErS-chANgEEE Flusher Spray Nozzle 2 1043A-K Complete Assembly 7629

loWErEdflUShErS-AddToAboVEG 3” Groove Couplings 2 0687L 3” 90° Groove Elbow 2 0677A-L Complete Assembly 7630

Bypass Assembly

Front Bar Assembly

Rear Bar Assembly

Air Articulated Assembly(Note: Not Pre-Assembled)

A

C

E

D

B

G

I

J

M

F

F

N

A

A

C

C

E

E

D

D

B

B

G

I

J

K

HF

A

C

E

D

B

G

J

K

L

H

F

I

Note: See picture on page 48

Note: See picture on page 48


HOSE REEL, SUCTION FILL, SPRAY MONITOR

dEScrIPTIoN QTy PArT#A 2” Preform Clamp 2 0610 B 11⁄2” Groove Coupling 1 0684 C 11⁄2” Grooved Hose Barb 1 2612 D 11⁄2” Rubber Water Hose 4FT 0738 E 11⁄2” Threaded Hose Barb 1 1302 F 11⁄2” Street 90 1 1314 G 1⁄4” Hose Reel Brackets 1 3609 H 11⁄2” Nipple Thread x Groove 1 2128 I 11⁄2” Nipple Thread x Weld 1 3319 J 11⁄2” Gate Valve 1 1546 K 11⁄2” Adjustable Fog Nozzle 1 1068 L Rubber Hose Reel Hose 1 Varies M Hose Reel 1 Varies

*ElEcTrIchoSErEElASSEmblIESAdd:N Circuit Breaker 1 3880O Solenoid 1 3881P Push Button Switch 1 3882

A-M 1” x 50’ Manual 6543A-M 1” x 100’ Manual 6545A-M 11⁄2” x 50 Manual 3867A-M 11⁄2”x 100’ Manual 4967A-P 11⁄2” x 50 Electric 6092A-P 11⁄2”x 100’ Electric 6093

dEScrIPTIoN QTy PArT#A 3” x 20’ PVC hose 1 2032 B 3” Suction Branch 1 4657 C 3” Wafer Butterfly valve 1 2557 D Support Strap for Branch 1 2165 E 3” MalexMale camloc 1 0590 F 3” Threaded Flange 1 1260 G 3” Suction Foot Valve 1 1535 H 3” 90° elbow 1 0677 I 3” Grooved Butterfly Valve 1 3598 J 4” Grooved Butterfly Valve 1 3606 K 3” Grooved Coupling 3 0687 L 4” Grooved Coupling 1 0689 M 3” Nipple Grooved x Weld 1 3095 N 3” nipple Grooved x Notched 1 6020 A-N Complete Assembly 4758

dEScrIPTIoN QTy PArT#A 2” x 72” Pipe Weld x Thread 1 4339 B 3” x 18” Pipe Groove x Groove 1 7319 C 9030E Air Valve 1 4117 D 3” Grooved Tee 1 0716 E 3” x 2” Grooved Coupling 1 2767 F 2” Nipple Weld x Groove 1 4686 G 3” Grooved Coupling 2 0687 H 1⁄8” Quick Exhaust Valve 1 4520 I 1⁄8” 90° airline fitting 1 5547 J Electric Monitor 1 Varies A-J Complete Assembly 12V Toggle 6479 A-J Complete Assembly 12V Joy Stick 7092 A-J Complete Assembly 24V Toggle 7274

Hose Reel Assembly

Suction Fill Assembly

Spray Monitor Assembly

A

CE

D

B

GI

J

K

L

M

N O P

H

F

A

C

E

D

B

G

I

J

K L

NM

H

F

Toggle Box Control

A

C

E

D

B

G

I

J

H

F


DIAGRAMS


PLUMBING PHOTOS

Pump mount to standard transmission. PTO bottom mount, water pump mounted inside frame rail on driver side.

Top view of water pump, plumbed to manifold with rear supply pipe attached. Rigidmountcouplersareusedtoattachthesprayheadtopipe(andon90ifasidespray).Standardgrooved couplings are used to attach nozzle.

Note: The cut out arch in the tank runner for the manifold.Note:thepicturedfrontmountisspringloadedandhasthetankguidemountedtotoptiedown.(Seemountinginstructions).

Frontmountisspringloaded.Themidmountandtherearmountarerigid.(Seemountinginstructions.)

Plumbing from manifold to the front bar is 21⁄2”pipe(kitshaveelbowsforcustominstallation).Frontbar is 3” x 52” grooved on both ends.

Rear spray bar.Note: Rear tank mount - wiring harness - cut out on end plate of tank for the 3” supply pipe

A

B

A The 3” rear spray bar tees into the supply line. B 3” manifold with grooved ends, grooved X notched nipples to be installed where needed.


TRUCK SPECIFICATION FORM

MAKE TANKSIZE(GAL)

MODEL PTODRIVE HYDRAULICDRIVE

YEAR SPRAY HEADS

CONVENTIONAL CABOVER HOSEREEL

ENGINE SELFLOADING

TRANSMISSION MONITOR

FRONTAXLECAPACITY EPOXYCOATING

REARAXLECAPACITY GRAVITYDROP

CABTOAXLE(SINGLE) HOTSHIFTPTO

CAB TO TANDEM PAINT CODE

NOTES:

CUSTOMER NAME PHONE FAX ADDRESS CITY STATE ZIPCODE

TRUCK SPECIFICATION FORM

“CABTOAXLE

“CAB TO CENTER OF TANDEM


OPERATION & MAINTENANCE

FOR COMPLETE INVENTORY AND TO ORDER PARTS GO TO

WWW.WATERTRUCKS.COM

OPERATION OF WATER TRUCK SPRAY SYSTEM

WITH HOT SHIFT PTO

• Engage PTO while truck RPM is 1,000 or less. Disengage PTO at any RPM.

WITH AIR OR CABLE SHIFT PTO

• Engage PTO while truck is standing still. Never try to engage or disengage PTO while truck is moving. Transmission or PTO failure will result.

DO NOT close all spray head(s) under full pressure. Pump or spray head damage may occur. To close valves safely let engine wind down with clutch disengaged, then close spray heads.DO NOT operate water pump with empty water tank. Water lubricates the pump seals, therefore, lack of water will result in seal failure.The PTO on your truck is matched to your pumping system. The engine on a diesel powered unit should not exceed 2200 RPM while pumping. Gasoline powered units should not exceed 3000 RPM while pumping. Over-speeding the pump can cause premature drive line and pump failure.

DITCH FILL OPERATIONSELF PRIMING PUMPS:1. Pump volute must be filled with water.2. Connect fill hose to cam-loc fitting on pump suction plumbing and lower strainer into water source.3. Close 4” valve between tank and pump suction. Open the valve between pump and fill hose. Open valve between pump

discharge and tank.4. Engage pump drive and set engine speed at 2000 rpm.5. When tank is filled, turn off pump drive. Reverse position of the three valves so system is ready for spraying. NON-SELF PRIMING PUMPS:1. There must be enough water in the tank to flood the pump volute and the fill hose. Check the foot valve on the fill hose to

assure it closes. If the foot valve doesn’t hold water, repair or replace it before proceeding.2. Connect fill hose to cam-loc fitting on pump suction plumbing and lower foot valve into water source.3. Close the valve between tank and pump suction. Open the valve between pump and fill hose. Open the valve between

pump discharge and tank.4. Engage pump drive and set engine speed at 2000 rpm. If at this point the pump isn’t moving water, do the following: Leave the pump turning. Simultaneously, close the hose valve and open the tank to pump valve. This creates a flow of

water through the pump. Then, reverse these valves at the same time. The momentum of the flow through the pump should start filling the tank.

5. When filling is complete and pump drive is shut down, reverse valve positions before disconnecting the suction hose at the cam-loc.

If you encounter problems with filling check for: v Valve Positioning v Suction Hose is Water and Air Tight (including cam-loc) v Obstructions Behind the Pump v Foot Valve/Strainer blocked by mud or sand v Broken Pump Shaft

• Rocks or pieces of rust periodically make their way through the water loading system (top or ditch fill). Check inside the tank weekly for foreign objects and remove them. Pea sized rocks can damage the pump and spray system.

• Winterize your system: Always drain pump and piping before a freeze. Freezing water will split the pump and piping.

• Grease pump and PTO drive shaft bi-weekly with good multipurpose chassis grease.

CAUTION: To avoid damaging the water pump, plumbing and sprayheads with sand, silt or small gravel; always use a strainer or foot valve.

2045 West Buckeye Road

Phoenix, Arizona 85009

(800) 600-TANK • Ph: (602) 253-7739

Fax: (602) 258-6312

www.watertrucks.com

where the dust settles… catalog x - water trucks the dust settles… ® ® catalog x. 1 •...

Documents