E T

p.m49 a.m

G

C&1

C&3

C&1

2&1

B&5

B&3

B&2

5&6

3&4

A&2

A&5

A&3

Spring Ball

Spring Wire

Spring Wire

Spring Wire Spring Ball

Spring Ball

Spring Wire

Spring Wire

Spring Wire

B

C

A

B A A B

Special notice: Before assembling, make sure that you lay out and iden fy all parts listed below

in the part list. All bolts should be hand ghtened. Never use powder tools or excessive force

during assembly and ghtening of bolts. It is recommended to assemble this product with 2 or more people.

Step 1

Top frame assembly:

1) Make tube 3#,4# and corner connector A,B together.

2) Make tube 3#,4# and top connector C together.

3) Connect tube 1#,2# with part A,B,C and make sure they click into place.

Step 2

Fit on the canopy fabric:

1) Connect tube 5# with corner connector A,B to set up the frame top.

2) Fit on the canopy fabric G ,connect tube 5#,6# and plas c base D together, pull the canopy

fabric ghtly over the frame.

3) Hook the fabric of legs to a suitable bo om hole on tube 6#, please see FIGURE 1.

Step 3

Fix the whole canopy:

1) Insert one steel stake F into a hole on plas c base D, make it fix on the ground, please see

FIGURE 1, do same on other 3 bases .

2) Make one end of the rope E e with the plas c ring on canopy fabric corner, please see

FIGURE 2, the other end with steel stake F , please see FIGURE 3,do same on other 3

ropes, pull the ropes to suitable 4 direc ons, fix the steel stakes F on the ground.

FIGURE 1

FIGURE

FIGURE

3

2

eti

ti