winch design and construction - neumann equipment · winch design and construction marine winches...

Marine Winches and Equipment Winch Design and Construction

Marine Winches and Equipment 1

Winch Design and Construction

Marine Winches and Equipment Winch Design and Construction



Marine Winches and Equipment


The Neumann Equipment’s range of Marine Winches is based on years of experience dealing with, and being directly involved with end users of this equipment.

The design and engineering of all our Marine Winches is carried out in house by qualified mechanical engineers using FEA Computer modelling software. This is checked by third parties to ensure these products comply with all relevant specifications and Australian Standards.

When purchasing a Marine Winch, you can feel confident in Neumann Equipment designed and manufactured products. From the design stage though to dispatch, our internal Quality Assurance Systems fully comply with AS/NZS ISO 9001:2008.

Material used in our standard range of Marine Winches is Grade A36 Carbon Steel, but upon request 316 Stainless Steel can be used as an option.

Our Abrasive Blast and Industrial Coatings facility complies with Marine Protective Coating Standards and is adjacent to our manufacturing facilities, reducing transport and handling costs.

Our clients can be assured that all manufacturing activities are managed in house with a single point of contact provided to ensure your build process is seamless and delivered as promised.

Marine Winches and Equipment Windlass Anchor Winches


Windlass Anchor Winches

Windlass Anchor Winches

Neumann Equipment electric and hydraulic Windlass Anchor Winches are designed and manufactured from tough, high quality components for reliability at sea.

There are two configurations for the Windlass Anchor Winches:

Chain gypsies retrieve the chain and feed into a locker below;

Drums which store the chain and rope on a drum.

The Windlass Anchor Winch units are either hydraulically or electrically driven and controlled.

The Windlass Anchor Winch gypsy and windlasses are manufactured with components made from a range of materials, including steel, cast iron or bronze.

Neumann Equipment’s range of Windlass Anchor Winches includes the following standard specifications:

Worm or bevel-helical gearbox;

Gear or geroler style motors (or optional electric drive);

Optional fail safe brake;

Gypsy and capstan are cast to suit your requirements;

Heavy duty marine protective coating.

WINDLASS ANCHOR WINCH SPECIFICATIONS AWA1250H AWA2500H

Line Pull (up to) 2,750 lb 5,500 lb

Hauling Speed 0 – 50 ft/min 0 – 50 ft/min

Chain Gypsy Size – Short Link 3/8” – 5/8” 1/2” – 7/8”

Chain Gypsy Size – Stud Link 1/2” – 5/8” 5/8” – 7/8”

Windlass Waist Size 8” 9”

Weight – Double Sided 882 lb 1,213 lb

Drive (optional electrical drive) Hydraulic Hydraulic

Marine Winches and Equipment Capstan Winches


Capstan Winches

Capstan Winches

Neumann Equipment manufactures several versions of vertically mounted Capstan Winches that can be powered by either hydraulic or electric motors. These are directly coupled to a reduction hub to reduce the speed and increase the torque.

The Capstan Winches can be mounted on the wharf or on the vessel and can be used to haul or pull your vessel toward the dock.

Advantages of a Capstan Winch:

Various rope sizes can be used;

Hauling can commence at any point along a length of rope;

Elimination of the requirement to unwind long rope lengths;

If you need to stop the pull, you simply reduce the amount of tension you are applying to the rope;

Rope is free to be pulled out by another source.

The standard range of Capstan Winches start from 2,650 lb through to 22,000 lb units. Their line speeds are variable from 0 to 65 foot per minute.

The Capstan Winch base is usually mounted by a row of bolts around the outside perimeter, although on occasions these units can be concreted into the foundations.

CAPSTAN WINCH SPECIFICATIONS CAP1200H CAP2000H CAP4000H CAP10000H

Line Pull 2,645 lb 4,410 lb 8,820 lb 22,050 lb

Hauling Speed 0 – 65 ft/min 0 – 65 ft/min 0 – 65 ft/min 0 – 65 ft/min

Capstan Waist Size 6’ – 10” 8’ – 12” 10” – 14” 12” – 16”

Drive (optional electrical drive) Hydraulic Hydraulic Hydraulic Hydraulic

Marine Winches and Equipment Mooring Winches


Mooring Winches

Mooring Winches

Neumann Equipment manufactures a range of Mooring Winches designed to secure a ship in position in relation to the shore or loading equipment that has limited freedom of movement.

These Mooring Winches can be used for heaving the ship alongside, or un-berthing when another ship is involved. The Mooring Winch system holds a pre-set line tension securing the vessel regardless of the tide height.

Neumann Equipment’s range of Mooring Winches include the following standard specifications:

Hydraulic or electrical drives;

Manual adjustment or fully automatic line tension;

Winch drum is supported with a fully sealed self-aligning outrigger bearing;

Winch base and drum are fabricated from grade A36 carbon steel, 316 stainless steel optional;


Our Mooring Winches range from 11,000 lb through to 44,000 lb, with variable line speeds from 0 to 65 foot per minute. These winches are optioned with a manually operated parking lock, which eliminates drum movement when the equipment is not electrically connected.

MOORING WINCH SPECIFICATIONS MOW5000H MOW10000H MOW15000H MOW20000H

Line Pull – Top Layer 11,023 lb 22,046 lb 33,069 lb 44,092 lb

Line Pull – Bottom Layer 16,314 lb 32,408 lb 48,502 lb 65,036 lb

Line Speed – Top Layer 0 – 65 ft/min 0 – 65 ft/min 0 – 65 ft/min 0 – 65 ft/min

Line Speed – Bottom Layer 0 – 46 ft/min 0 – 46 ft/min 0 – 46 ft/min 0 – 46 ft/min

Drum Speed 0 - 10.5 rpm 0 - 10.5 rpm 0 - 10.5 rpm 0 - 10.5 rpm

Rope Size (typical) 5/8” 7/8” 1” 1¼”

Drum Width 19½” 19½” 29½” 29½”

Drum Capacity 1000’ 640’ 670’ 375’

Drive (optional electrical drive) Hydraulic Hydraulic Hydraulic Hydraulic

Marine Winches and Equipment Towing Winches


Towing Winches

Towing Winches

Neumann Equipment manufacture Towing Winches to suit the marine market.

Neumann Equipment’s range of Towing Winches include the following standard specifications:

Line pull options are from 55,000 lb to 110,200 lb on the top layer;

Maximum line speed of 65 foot per minute;

Fail safe brakes within the drive system;

Brake Band directly attached to the winch drum cheek plate;

Brake bands are spring applied and hydraulically released, with an accumulator backup;




Custom Towing Winches are available upon request to meet your specific requirements.

TOWING WINCH SPECIFICATIONS TOW25000H TOW50000H

Line Pull – Top Layer 55,116 lb 110,231 lb

Line Pull – Bottom Layer 81,570 lb 163,142 lb

Line Speed – Top Layer 0 – 65 ft/min 0 – 65 ft/min

Line Speed – Bottom Layer 0 – 42 ft/min 0 – 42 ft/min

Drum Speed 0 - 5.8 rpm 0 - 5.8 rpm

Brake Holding 99,2008 lb 187,393 lb

Rope Size (typical) 1¼” 1 7/8”

Drum Width 33½” 47¼”

Drum Capacity (m) 722’ 590’

Drive (Hydraulic only) Hydraulic Hydraulic

Marine Winches and Equipment Tugger Winches


Tugger Winches

Tugger Winches

Neumann Equipment manufactures a range of Tugger Winches to suit the marine industry.

The term “Tugger Winch” refers to a winch that can be either hydraulically or electrically driven and is designed to assist the crew to manipulate heavy pieces of towing equipment such as chain bridles, towing plates and large towing wire ropes used in ship handling work. The Tugger Winches are normally mounted to the cargo deck of the vessel.

Neumann Equipment’s range of Tugger Winches includes the following standard specifications:

Three size options: 6,600 lb, 13,200 lb and 22,000 lb top layer line pull;

Rexroth hydraulic motors (or optional electric drive);

Automatic drum lock - multiple disc brake;

Available with automatically operated band brakes;




We can also design and manufacture custom winches to meet your specific requirements.

TUGGER WINCH SPECIFICATIONS TGW3000H TGW6000H TGW10000H

Line Pull – Top Layer 6,614 lb 13,228 lb 22,046 lb

Line Pull – Bottom Layer 10,141 lb 23,369 lb 37,787 lb

Line Speed – Top Layer 0 – 65 ft/min 0 – 65 ft/min 0 – 65 ft/min

Line Speed – Bottom Layer 0 – 39 ft/min 0 – 36 ft/min 0 – 39 ft/min

Drum Speed 0 – 12 rpm 0 – 9 rpm 0 – 5.3 rpm

Rope Size (typical) 5/8” 15/16” 1”

Drum Width 18½” 21½” 33½”

Drum Capacity 2,400’ 1,130’ 3,100’

Drive (optional electrical drive) Hydraulic Hydraulic Hydraulic

Marine Winches and Equipment Dredge Winches


Dredge Winches

Dredge Winches

Neumann Equipment manufacture a range of Dredge Winches, designed to specifically suit dredging applications.

There are three sizes within the range, starting at 1,650, 4,400 and 8,800 lb top layer line pull unit.

We can also custom build a Dredge Winch suitable to your requirements.

Neumann Equipment’s range of Dredge Winches include the following standard specifications:

Compact planetary drive gearbox - Rexroth GFT;

Rexroth hydraulic motors (or optional electric drive);



Winch base and drum are fabricated from grade A36 carbon steel, 316 stainless steel available on request;


Our Quality Assurance procedures ensure that your Dredge Winch is manufactured to a high standard, returning many years of trouble free service.

When you’re in the market to purchase a new Dredge Winch, you cannot afford to go past these quality Australian made and supported products.

DREDGE WINCH SPECIFICATIONS DRW750H DRW2000H DRW4000H

Line Pull – Top Layer 1,653 lb 4,409 lb 8,818 lb

Line Pull – Bottom Layer 3,053 lb 7,275 lb 18,860 lb

Line Speed – Top Layer 0 – 66 ft/min 0 – 66 ft/min 0 – 66 ft/min

Line Speed – Bottom Layer 0 – 36 ft/min 0 – 39 ft/min 0 – 30 ft/min

Drum Speed 0 - 20.5 rpm 0 - 11.8 rpm 0 – 9 rpm

Rope Size (typical) 7/16” 1/2” 5/8 “

Drum Width 8” 7” 18”

Drum Capacity 360’ 1,804’ 1,804’

Drive (optional electrical drive) Hydraulic Hydraulic Hydraulic

Marine Winches and Equipment Barge Winches


Barge Winches

Barge Winches

Neumann Equipment manufactures Barge Winches to suit the customer’s specific requirements.

The Barge Winch can be used for various tasks, including:

Opening and closing loading ramps;

Hauling equipment;

Positioning the barge;

The chain gypsy section of the winch is used to raise the anchors.

Neumann Equipment’s Barge Winches include the following standard specifications:

Bevel-helical gearbox;

Geroler style motors;



Gypsy size to suit your requirements;


The Barge Winch specification below has proved to be very popular with barge operators.

These are available with a direct electric drive or with an electro-hydraulic power pack.

BARGE WINCH SPECIFICATIONS BRW5000E

Line Pull – Top Layer 11,023 lb

Line Pull – Bottom Layer 17,637 lb

Line Speed – Top Layer 0 – 65 ft/min

Line Speed – Bottom Layer 0 – 43 ft/min

Drum Speed 0 - 12.2 rpm

Rope Size (typical) 5/8”

Drum Width 10”

Drum Capacity 425’

Drive (Electrical or with Electro-Hydraulic powerpack) Electric

Marine Winches and Equipment Oceanographic Winches


Oceanographic Winches

Oceanographic Winches

Neumann Equipment manufactures Oceanographic Winches to suit the customer’s requirements in either electric or hydraulic drive, with Archimedes screw type wire feeders.

Neumann Equipment’s Oceanographic Winches can be optioned with a range of special features, including:

Distance and tensioning monitoring with data logging;

Both local and remote control stations;

Winch drum is grooved to suit the specific rope diameter;

Compact planetary drive gearbox - Rexroth GFT;

Rexroth hydraulic motors;

Archimedes screw wire feeder;





The cable enters via a removable bolt in section of the drum core, allowing the end of the cable to pass through a hollow shaft where the rope is terminated to a slip ring, which is then connected to a computer for monitoring the information gathered by the device being towed through the water.

OCEANOGRAPHIC WINCH SPECIFICATIONS OCW1000H OCW3000H

Line Pull – Top Layer 2,205 lb 6,614 lb

Line Pull – Bottom Layer 3,880 lb 11,023 lb

Line Speed – Top Layer 0 – 344 ft/min 0 – 328 ft/min

Line Speed – Bottom Layer 0 – 196 ft/min 0 – 196 ft/min

Drum Speed 0 – 43.1 rpm 0 – 21.2 rpm

Cable Size (Typical) 5/16” 5/8”

Drum Width 23½” 88½”

Drum Capacity 9,869’ 33,176’

Drive (optional electric drive) Hydraulic Hydraulic

Marine Winches and Equipment Chain Jaws


Chain Jaws

Chain Jaws

Neumann Equipment manufactures Chain Jaws to suit 1 13/16” anchor chain.

The device is designed to eliminate loading of the anchor winch by the anchor chain.

The chain can be hauled in when the jaws are closed as they are spring loaded to allow the chain to pay in. To drop anchor into deeper water the jaws must be hydraulically opened, allowing the chain to pay out freely.

Neumann Equipment’s Chain Jaws include the following standard specifications:

To suit 1 13/16” chain;

Jaws operated hydraulically;

Spring loaded jaws to allow chain to pay in;

The unit can be pivoted up for maintenance;

Fabricated from grade A36 carbon steel;


Please contact Neumann Equipment if you have custom chain size requirements.

CHAIN JAWS SPECIFICATIONS CHJ46H

Chain Size 1 13/16”

Holding Capacity 24,251 lb

Drive required (not supplied) Hydraulic

Oil Supply Required 6.08 gpm

Hydraulic Pressure (bar) 2,600 psi

Net Weight (kg) 1,058 lb

Marine Winches and Equipment Custom Winches


Custom Winches

Custom Winches In addition to our comprehensive range of standard winches, we can specifically design and manufacture custom made winches to suit your requirements. Our experienced in-house team can design a specific winch to meet your specifications. The designs are fully FEA modelled to ensure stresses are minimized and Australian design standards are achieved.

Marine Winches and Equipment Spare Parts and Service


Spare Parts and Service

Spare Parts and Service

Neumann Equipment has been manufacturing dredges, winches and other supporting equipment for over 50 years.

Since the Company’s inception, technology, equipment and manufacturing methodology have altered considerably. The key to the Company's success is the fundamental Neumann philosophy of finding solutions to engineering challenges.

Neumann Equipment has built a reputation for successfully completing difficult projects using engineering skills, innovative ideas and cost-effective solutions.

We pride ourselves in delivering outstanding service.

After Sales Service

Our aim is to provide you with the best technical advice and support both before and after you purchase. The experience of our technical and engineering teams means that customers have fast access to any technical support that may be required.

If you have any queries on the equipment we have provided, or if you need technical information on our product, please contact our experienced team.

Spare Parts

We can offer spare parts for all the equipment we manufacture. Many of the standard components are readily available, or if required our production team can manufacture components that may be required.

Marine Winches and Equipment Supporting Documentation


Supporting Documentation

Supporting Documentation

Operations & Maintenance Manual

A comprehensive Operations and Maintenance Manual is included with each winch package. The document covers:

Safety

Risk Assessment

Operation

Troubleshooting

Electrical

General safety process

Machine system overview

Maintenance

Schematics

Hydraulics

Job safety & environmental analysis

Spare Parts

Test Certificates

Pre delivery operational test certificate.

Prior to delivery, every winch is functionally tested.

Test certificates are available upon request.

Maintenance & Support

Product support, onsite maintenance and spare parts are available and can be arranged by contacting Head Office.

Standard Offer Includes

One hard copy of Operation and Maintenance Manual

One electronic copy (if requested)

Contact Details Neumann Equipment Head Office

Phone: Australia: (07) 5589 9275

International: +61 7 5589 9275

Fax: Australia: (07) 5589 9273

International: +61 7 5589 9273

Email: [email protected]

Web: www.neumannequipment.com.au

Postal: PO Box 8 Currumbin Queensland, 4223 Australia

Address: Nuban Street Currumbin Queensland, 4223 Australia

http://www.neumannequipment.com.au/

Marine Winches and Equipment Services Provided


Services Provided

Winches

Dredges and Dredging

Equipment

Cable Handling

Equipment

Design & Engineering

Custom Applications

Fabrication and

Manufacturing

winch design and construction - neumann equipment · winch design and construction marine winches...

Documents