winecooler fileinstallingyourwinecooler unpacking your wine cooler 1. remove all packaging material....

16
Haler ° What The World Comes Home To TM Wine Cooler Rafra'ichisseur _ vin Enfriador deVino UserManual. _odel # Guide de r Utilisateur- ModUle ManualdelUsuario- Paro_o_e_o_e

Upload: others

Post on 08-Sep-2019

13 views

Category:

Documents


0 download

TRANSCRIPT

Page 1: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

Haler °What The World Comes Home To TM

WineCooler

Rafra'ichisseur_ vin

EnfriadordeVino

UserManual. _odel#

Guidede r Utilisateur-ModUle

ManualdelUsuario- Paro_o_e_o_e

Page 2: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

SAFETYPRECAUTIONSRead all of the instructions before using this appliance.

When using this appliance, always exercise basic safety

precautions, including the following:

1) Use thisappliance only for its intended purpose as described in thisuseand care guide.

2) This wine cooler must be properly installed in accordance with theinstallation instructions before it is used. See grounding instructions in theinstallation section.

3) Never unplug your wine coolerby pulling on the power cord. Alwaysgrasp the plug firmly and pull straightout from the outlet.

41 Repair or repine immediately, al_ electric service cords that have becomefrayed or otherwise damaged. Do not use a cord that showscracks orabrasion damage along its length, the plug or the connector end.

5) Unplug your wine cooler before cleaning or before making any repairs.Note: If for any reason thisproduct requires service, we stronglyrecommend that a certified technicianperforms the service.

6) If your old wine cooler is not being used, we recommend that you removethe doors. This will reduce the possibility of danger to children.

7) Thiswine cooler shouldnot be recessed or bulbin an enclosed cabinet. Itis designed for Freestanding installation only.

8) Do not operate your wine cooler in the presence of explosive fumes.

9) Do not store foods in wine cooler as interior temperature may not be coolenough to prevent spoilage.

10) Use of an extension cord is not recomnended.

Page 3: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

ForFutureReferencePlease

SAVETHESEINSTRUCTIONS

DANGER

Risk of child entrapment. Before you throw away your old

wine cooler, take off the doors. Leave the shelves in place so

that children may not easily climb inside.

As per UL 250 1 !.2.6

Risk of child entrapment. Before you throw away your old

Thankyou for usingour Haierproduct.Thiseasy-to-usemanual willguide you in getting the best useofyour wine cooler.

Rememberto record the modelondserial number. Theyare on a label inback of the wine cooler.

Model number

Serial number

Date of purchase

Stapleyour receipt to your manuak You will need it to obtainwarranty service.

2

Page 4: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

PAGE

Safety Precautions .......................................................................... 1

Parts And Features .......................................................................... 4

Installing Your Wine Cooler .......................................................... 5

Unpacking YourWine Cooler .................................................................. 5

LevelingYourWine Cooler ...................................................................... 5

ProperAir Circulation ............................................................................ 5

Electrical Requirements............................................................................ 6

Wine Cooler Features And Use .......................................................... 7

Initial Set Up .......................................................................................... 7

Temperature Adjustment .......................................................................... 7

Shelving ................................................................................................ 8

Interior Light .......................................................................................... 8

Door Lock.............................................................................................. 9

Normal Operating Sounds ...................................................................... 9

Proper Wine Cooler Care and Cleaning .................................... 10

Cleaning and Maintenance .................................................................. ! 0

PowerInterruptions.............................................................................. ! 1

Vacation and Moving Care .................................................................. 1 1

Troubleshooting .............................................................................. 12

Warranty Information .................................................................. 14

3

Page 5: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

\

®

®

1. White Wine Bulton (-)

2, Red Wine Button (+)

3, Interior Light Button(set)

4. LED Temperature Display

5. Door Lock

6. Door Handle

7. Chrome Plated Slide-Out Shelves

(quantitieswill vary as per model)

8. Adjustable Leveling Legs (not shownJ

4

Page 6: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

InstallingYourWineCooler

Unpacking Your Wine Cooler

1. Remove all packaging material. This includesthe foam base and all

adhesive tape holding the wine cooler accessoriesinside and outside.

Slide out and remove plastic or foam guard used to secure the

compressor from shipping damage due ta vibration and shack.

2. Inspectand remove any remains of packing, tape or printed

materials before powering on the wine cooler.

Leveling Your Wine Cooler

Your wine cooler has four leveling legs which are located in the

front and rear comers of your wine coder. After properly placing your

wine cooler in itsfinal position, you can level your wine cooler.

Leveling legs can be adjusted by turning them clockwise to raise yourwine cooler or by turning them counterclockwise to lower

your wine cooler. The wine cooler door will close easier when the

leveling legs are extended.

Proper Air Circulation

• Toassureyour winecoolerworksat themaximumefficiencyitwasdesignedfor, you shouldinstallit ina locationwhere there

is properair circulation, plumbingand electricalconnections.• Thefollowing are recommended clearances around the winecooler:

Sides............... 2 "(50ram)

Top.................... 2" (50mm)Back.................. 2" (50mm)

• Do not over fill your wine cooler for proper internal air circulation.

Page 7: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

Electrical Requirement

• Make sure there is a suitable power Outlet (I 15 volts, 15 amps outlet)

with proper grounding to power the wine cooler.

• Avoidthe useof three pbg adaptersor cutting off the thirdgroundinginorder to accommodatea _woplugoul_et.Thisisa dangerouspracticesinceit providesno effectivegroundingforthewine cooler and mayresult in shockhazard,

Install Limitations

• Do not install your wine cooler in any location not properly insulated or

heated e.g. garage etc. Your wine cooler was not designed to operate

in temperature settingsbelow 55" Fahrenheit.• Select a suitable location for the wine cooler on a hard even

surface away from direct sunlightor heat source e.g. radiators,

baseboard heaters, cooking appliances etc. Any floor unevenness

should be corrected with the levering bgs located on the front and rearbottom corners of the wine cooler.

• Your wine cooler is designed for flee-standing installationonly. It is not

designed for built-in application.

Page 8: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

Initial Setup

Once you have plugged the unit into an electrical outlet,

let the unit run for at least 30 minutes to acclimate itself before

making any adjustments. During this lime the Red Wine light may stay on.

Temperature Adjustments: seeFig.# 1

The wine cooler is preset from the factory to automatically

accommodate temperature requirements for red or white wines.

If you store mostly white wines, press the 'White Wine" button and the

wine cooler will maintain an average temperature between

45" to 50" F.Pushing the "Red Wine" buttonwill yield an

average temperature between 55" to 60" F.

The wine cooler can be set to any temperature you desire to

accommodate your wine storage requirements. To set the temperature,

press both the "White Wine" and "Red Wine" buttons simultaneously

and hold for approximately 3 seconds. Now you are in temperature set

mode. Decrease the temperature by pushing the "White Wine" button

and increase the temperature by pressing the nRed Wine" button.

Pressingthe appropriate button 3 times will adjust the temperature 3

degrees, press4 times equals 4 degrees, 5 times equals 5 degrees, and

so on. Once you have selectedthe temperature you desire, push the

'Light/Set" button. Now the wine cooler is programmed and the LED

readout will return to current internal temperature reading.

fig.# I

I I

WSh Rod Ligl_

oF

7

Page 9: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

There will be a 3 degree variance +/- between the temperature you

selectand the temperature indicated on the LEDreadout.

This occurs because the wine cooler activates and deactivates

trying to maintain your desired temperature. There is often a

1O"variance between the top and bottom shelvesof the wine cooler.

Therefore, if you hove set the wine cooler for 50" and hove a

mix of red and white wines, you may want to put the white wine

on the bottom shelfwhere the temperature will be 45" F,and place the

wine on the top shelfwhere the temperature will be 55" F.

Shelving

Theshelvesare chrome platedfor appearance and easycleaning.

Toaccommodatedifferentsizedbottles the shelvesslideout

and con be movedup or down intoany of the tracksmolded

intothe cooler cabinet. Largerbottlesor Magnumscan bemore easily

accommodatedat thecrass shelvesat the bottom of thecooler.

Youwill noticethat the shelvesare designedso the bottlesdo

not line-up directlyoveroneanother.Thisallowsfree air

movementand providesmorespace.

Interior Light

• Tocomplementthe lookof yourwine collection, a softlighthasbeen

built intothe wine cooler.Simplypushthe "Light/Set"buttonand the

lightcomeson, pushagain for off. For maximum energyefficiency,

leavelightoffwhen notviewingyourcollection.

8

Page 10: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

Door Lock

" For safely and security,your wine cooler is equipped with a door lock.

Toeliminate the risk of accidental child entrapment, the lockwas

designed so that the door will not lock until the key is removed

(consistentwith UL requirements).

Normal Operating Sounds You May Hear• Boiling water, gurgling soundsor slightvibrations that are the resultof

the refrigerant circulating through the cooling coils.

• The thermostat control will click when it cycleson and off.

9

Page 11: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

Cleaning and Maintenance

Warning: To avoid electric shockalways unplug yourwine cooler before cleaning. Ignoring thiswarning

may result in death or injury.

Caution: Before using cleaning products, always read andfollow manufacturer's instructionsand warnings toavoid personal injury or product damage.

General:

• Prepare a cleaning solution of 3-4 tablespoonsof

baking soda mixed with warm water. Use sponge or

softcloth, dampened with the cleaning solution, to

wipe down your wine cooler.

• Rinsewith clean warm water and dry with a softcloth.• Do not use harsh chemicals, abrasives, ammonia,

chlorine bleach,concentrated detergents, solventsor

metal scouring pads. SOME of these chemicals may

dissolve,damage and/or discolor your wine cooler.Door Gaskets:

• Clean door gaskets every three monthsaccording to

general instructions.Gaskets mustbe kept clean and

pliable to assure a proper seal.

• Petroleum jelly applied lightly on the hinge side of

gaskets will keep the gasket pliable and assure a

goodseal.

10

Page 12: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

Power Interruptions

• Occasionally there may be power interruptionsclue to

thunderstormsor other causes. Remove the power cord from AC outlet

when a power outage occurs.V/hen power has been restored,

replug power cord to AC outlet.

Vacation and Moving Care

• For long vacations or absences, unplug the wine cooler and clean the

wine cooler and door gaskets according to "General cleaning" section.

Prop doors open, so air can circulate inside. When moving always

move the wine cooler vertically. Do not move with the unit lying down.

Possibledamage to the sealed systemcould occur.

11

Page 13: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

Wine Cooler Does Not Operate

• Check if wine cooler ispluggedin.• Checkif there ispower at theac outlet,by checking thecircuit breaker.

Wine appears too warm• Frequentdoor openings.

• Allow time for recenltyadded wine to reachdesiredtemperature.• Check gasketsfor proper seal.• Clean condensercoils.

• Adjust temperaturecontrol to colder setting.

Wine temperature is too cold

• If temperaturecontrol settingistoocold, adjustto a warmer setting.

Wine cooler runs too frequently

• Thismay be normalIo maintainconstanttemperatureduringhigh temperatureand humiddays.

• Doors may have beenopenedfrequentlyor for an extendedperiod of time.

• Clean condensercoils.

• Checkgasketfor properseal.• Checkto seeif doors are completelyclosed.

12

Page 14: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

Moisture build up on interior or exteriorof the wine cooler:

• This is normalduring high humidity periods.

• Prolonged or frequentdooropenings.• Checkdoor gasketsfor proper seal.

Wine Cooler door does not shut properly:• Levelthewine cooler.

• Checkfor blockagese.g. winebottles,shelves.

13

Page 15: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

14

What is covered and for howlong?

Thiswarranty coversall defectsin work-manship or materials for a period of:

12 months labor

12 months parts

5 years sealed system

The warrantycommenceson the datethe item was purchasedand theoriginalpurchasereceipt mustbe presentedtothe authorized servicecenterbeforewarranty repairs are rendered.

EXCEPTIONS: Commercial orRental Use warranty

90 days labor (carry-in only)

90 days parts

No other warranty applies

What is covered.

1. The mechanical and electricalparts,which serveas a functional, purposeof this appliance for a period of 12months.This includesall parts exceptfinish, and trim.

2. The componentsof the sealed systeme.g. hermetic compressor,condenserand evaporator from manufacturingdefectsfor a period of 5 years fromthedate of purchase.Any damagesto suchcomponentscausedbymechanical abuseor improperhandling or shipping will not becoverea

What will be done?

1. We will repair or replace, at our dL_:aetion any mechanicalor electricalpart which provesto be def_tive innormal usageduring the warrantyperiod so specified.

2. Therewill be no charge to thepurchaser for parts and labor on anycovered itemsduring the initial 12month period. Beyondthis period

only parts are covered in the remain-ing warranty. Labor is not providedand mustbe paid by the customer.

3. Contact your nearestauthorizedservicecenter. For the nameof thenearestservicecenterpleasecall1-877-337-3639

THIS WARRANTY COVERSAPPUANCES WITHIN THECONTINENTAL UNITED STATES,PUERTO RICO AND CANADA.IT DOES NOT COVERTHE FOLLOWING:

Damages from improper instollotion.Damages in shipping.Defects other than manufacturing.Damage from misuse, abuse, accident

a teration, ack oF proper care andmaintenance or incorrect current or

voltage.Damage from other than household use.Damage from service by other than an

authorized dealer or service center.Decorative trims or replaceable

light bulbs.Transportation and shipping.Labor (after the initial 12 months).

THIS UMITED WARRANTY IS GIVEN INUEU OF ALL OTHER WARRANTIES,EXPRESSEDOR, INCLUDING THEWARRANTIES OF MERCHANTABIUTYAND FITNESS FOR A PARTICULARPURPOSE

The remedy provided in this warranty isexclusive and is granted in lleu of allother remedies.

Thiswarranty does notcover incidentalor consequentialdamacqes,so the abovelimitotions may not apply to you. SomeStatesdo not allow limitations on howlong an implied warranty lasts,so theabove limitations may not apply to you.

This warranty gives you specific legalrights, and you may haveother rights,which vary, from stateto state.

Haier AmericaNew York, NY 10018.

Page 16: WineCooler fileInstallingYourWineCooler Unpacking Your Wine Cooler 1. Remove all packaging material. This includesthe foam base and all adhesive tape holding thewine cooler accessoriesinside

IMPORTANTDo Not Return This Product To The Store

if you have a problem with this product, please contact the "Haler CustomerSatisfaction Center" at 1477-337-3639.

DATED PROOF OF PURCHASEREQUIRED FOR WARRANTY SERVICE

IMPORTANTNe pas R_exp@dier ce Produit au Magasin

Pour tout probl_me concernant ce produit, veuillez contucter le servic_ descansommateurs 'Haler Customer Satisfaction Center' au 1-877-337-3639.

UNE PREUVE D'ACHAT DATEEESTREQUISE POUR BENEFICIERDELA GARANTIE.

IMPORTANTENo regrese este producto a la tienda

Si tiene algOn problema con este praducta, par favor cantacte el "Centro de Servicia alConsumidor de Haler" al 1-877-337-3639 (V;,lido solo en E.U.A).

NECESITA UNA PRUEBA DECOMPRA FECHADA PAPA EL SERVICIO DE LA GARANTIA

115V, 60 Hz

Made in China

Fabrlqu6 en ChineHecho en China

HalerWhat The World Comes Home To"

Haler America Trading, LL.C.

HVF042A61.-02 New York, NY 1001 8[sLued:t'/_,.-OI Parl # RF-9999-93

Printed in China