wingz technologies - ieee mechcanical projects 2017

WINGZ TECHNOLOGIES Cell:9840004562www.wingztech.com, www.finalyearproject.co.in [email protected],[email protected]

2017 – 2018 IEEE Software [ .net –Java – NS2 – MATLAB - Android] | VLSI |Embedded | Power Electronics | Power System | Mechanical | Civil and etc..

Plot No 18, Ground Floor,New Colony, 14th Cross Extension, Elumalai Nagar, Chromepet,Chennai – 600 044. Mobile: 9840004562, 9791006077. Phone: 044 – 65622200, Tamil Nadu, India.

Website: www.wingztech.com - [email protected],[email protected]

IEEE / Non IEEE / Real Time Project for B.E / B.Tech /M.E / M.Tech / BCA / MCA / M.Sc / MBA / Ph.D and etc…

IEEE MechanicalTITLES 2017

S.NO PROJECT TITLE DOMAIN YEAR

M 1 Electrical power generation and refrigeration by using wasteheat from ic engine. Mechanical 2017

M 2 Fabrication of air engine with d.c air compressor. Mechanical 2017

M 3 Fabrication of automatic pneumatic disc braking system. Mechanical 2017

M 4 Advanced electric car with regenerative braking & digitallocking system. Mechanical 2017

M 5 Fabrication of twin cylinder electromagnetic vehicle engine. Mechanical 2017

M 6 Fabrication of turbo charger for two wheelers. Mechanical 2017

M 7 Intelligent secure and privacy parking through ir sensor. Mechanical 2017

M 8 Automatic side stands with brake locking system. Mechanical 2017

M 9 Fabrication of multiple car safety system in bumper. Mechanical 2017

M 10 Fabrication of eddy current braking system. Mechanical 2017

M 11 Fabrication of weighing bridge in moving vehicle. Mechanical 2017

M 12 Generation of electricity using the flow or velocity ofvehicle exhaust gas. Mechanical 2017


M 14 Fabrication of variable volume engine. Mechanical 2017

M 15 Dual power generation system for automobile(thermoelectric + exhaust gas power generation). Mechanical 2017

M 16 Fabrication of tyre pressure inflation system. Mechanical 2017

http://www.wingztech.com/

http://www.finalyearproject.co.in/







M 17 Fabrication of three axis pneumatic modern tractor. Mechanical 2017

M 18 Fabrication of safety mechanism for vehicle (clutch lock). Mechanical 2017

M 19 Integrated drunk and drive prevention system. Mechanical 2017

M 20 Fabrication of anti theft steering system. Mechanical 2017

M 21 Automatic electro-magnetic gear transmission for twowheelers. Mechanical 2017

M 22 Automatic clutch and brake system for four wheelers. Mechanical 2017

M 23 Experimental investigation of an air conditioning systemdrive by lpg engine. Mechanical 2017

M 24 Fabrication of electro magnetic suspension. Mechanical 2017

M 25 Emission tester (co2) for automobile. Mechanical 2017

M 26 Automatic head light dim and bright controller with engineoverheating alarm Mechanical 2017

M 27 Efficient car parking system for four wheelers. Mechanical 2017

M 28 Fabrication of hydrogen engine with load tests Mechanical 2017

M 29 Emission control in two stroke petrol engine by usingmultiple sparks. Mechanical 2017

M 30 Sterling engine with parabolic collector (model). Mechanical 2017

M 31 Automatic vehicle locking system by without helmet. Mechanical 2017

M 32 Fabrication of multi nut (wheel) tighter and looser. Mechanical 2017

M 33 Fabrication of three axis pneumatic modern trailer. Mechanical 2017









M 34 Gps based automatic vehicle accident information system. Mechanical 2017

M 35 Fabrication of dual brake single liver system for twowheelers. Mechanical 2017

M 36 Fabrication of hydraulic break show riveting machine.. Mechanical 2017

M 37 Quick lifting jack with gear arrangement. Mechanical 2017

M 38 Air compressor using crank and slotted link mechanism Mechanical 2017

M 39 Gps based automatic vehicle accident information system Mechanical 2017

M 40 Elimination of chain drive in by-cycle Mechanical 2017

M 41 Fabrication of dual brake single liver system for twowheelers Mechanical 2017

M 42 Regenerative braking using pneumatic interface Mechanical 2017

M 43 Automatic break failure indicator and engine over heatingalarm Mechanical 2017

M 44 Fabrication of digital gear level indicator for four wheeler Mechanical 2017

M 45 Fabrication of hydraulic break show riveting machine Mechanical 2017

M 46 Fabrication of shock observer power generation system. Mechanical 2017

M 47 Fabrication of pneumatic disc braking system (pdbs) Mechanical 2017

M 48 Fabrication automatic lawn mover. Mechanical 2017

M 49 Quick lifting jack with gear arrangement Mechanical 2017

M 50 Fabrication of pedal operated cell phone charger Mechanical 2017









M 51 Fabrication of automatic reserve indication system Mechanical 2017

M 52 Fabrication of shock observer power generation system Mechanical 2017

M 53 Fabrication of nitrogen air vehicle with load test Mechanical 2017

M 54 Fabrication automatic lawn mover Mechanical 2017

M 55 Fabrication of automatic steering control system forautomobile Mechanical 2017

M 56 Automatic visitor guided with material handling vehicle Mechanical 2017

M 57 Fabrication of solar hybrid car Mechanical 2017

M 58 Highways high speed indication and automatic pneumaticbraking system Mechanical 2017

M 59 Automatic pneumatic vulcanizing machine Mechanical 2017

M 60 Gps based vehicle root tracking system Mechanical 2017

M 61 Automatic rain operated wiper and head light dim/brightcontroller Mechanical 2017

M 62 Fabrication of automatic railway gate controller Mechanical 2017

M 63 Smart shock absorber for automobile Mechanical 2017

M 64 Fabrication of digital fuel level indicator Mechanical 2017

M 65 Elimination of carbon particles from exhaust gas Mechanical 2017

M 66 Remote controlled scrap collecting vehicle Mechanical 2017

M 67 Fabrication of wireless tyre pressure monitoring system Mechanical 2017









M 68 Efficiency increasing system by using preheating method Mechanical 2017

M 69 Fabrication of electronic ignition system Mechanical 2017

M 70 Remote controlled tilting handicapped wheel chair Mechanical 2017

M 71 Fabrication of adaptive breaking system Mechanical 2017

M 72 Fabrication of king star electrical vehicle Mechanical 2017

M 73 Fabrication of automatic magnetic accident preventer fortrain Mechanical 2017

M 74 Shock absorber test rig using cam and sensors Mechanical 2017

M 75 Fabrication of solar race car Mechanical 2017

M 76 Fabrication of electric two wheeler Mechanical 2017

M 77 Railways accident avoiding system (level crossing and firealarm) Mechanical 2017

M 78 Fabrication of two engine synchronization for four wheeler Mechanical 2017

M 79 Fabrication of oil pump and water pump for jeep and tractor Mechanical 2017





M 84 Efficiency increasing system by using preheating method Mechanical 2017









M 85 Fabrication of automatic magnetic accident preventer fortrain Mechanical 2017

M 86 Fabrication of exhaust gas heat recovery power generationsystem Mechanical 2017

M 87 Water fuel engine with power generation Mechanical 2017

M 88 Auto indexing gear cutting attachment for pneumaticshaping machine Mechanical 2017

M 89 Automatic bar feeding mechanism for hack saw machine Mechanical 2017

M 90 Fabrication of hydraulic tail stock Mechanical 2017

M 91 Fabrication of automatic electro hydraulic jack Mechanical 2017

M 92 Fabrication of hydraulic pallet truck Mechanical 2017

M 93 Pneumatic automatic sheet cutting machine Mechanical 2017

M 94 Automatic pneumatic reciprocating grinding machine Mechanical 2017

M 95 Fabrication of double axis pneumatic jcb equipment Mechanical 2017

M 96 Fabrication of pneumatic 4-axis jcb equipment Mechanical 2017

M 97 Automatic conveyor based stamping machine Mechanical 2017

M 98 Fabrication of over head crane Mechanical 2017

M 99 Automatic paint marking machine for industries Mechanical 2017

M 100 Pneumatic cutting and grinding machine Mechanical 2017

M 101 D & f of automatic pneumatic ramming machine Mechanical 2017









M 102 Fabrication of hydraulic trolley type jack Mechanical 2017

M 103 Fabrication of automatic multi-purpose press Mechanical 2017

M 104 D & f of pneumatic injection moldings machine Mechanical 2017

M 105 Pneumatic operated intelligent braking system (ibs) Mechanical 2017

M 106 Pneumatic operated conveyor automation Mechanical 2017

M 107 Fabrication of pick and place robot Mechanical 2017

M 108 Automated guided vehicle (agv) Mechanical 2017

M 109 Smart tanker robot for security operations Mechanical 2017

M 110 Remote controlled paint spraying robot Mechanical 2017

M 111 Remote controlled bomb detecting robot Mechanical 2017

M 112 Automatic motorized arc welding robot Mechanical 2017

M 113 Automatic accident information system Mechanical 2017

M 114 Design and fabrication of heat exchanger Mechanical 2017

M 115 Analysis of temperature distribution in radiators used inautomobiles Mechanical 2017

M 116 Modeling and analysis of single plate clutch Mechanical 2017

M 117 Modeling and analysis of automobile drum brakereturn spring. Mechanical 2017

M 118 Composite material reinforcement of the leaf spring for thematerial glass carbon composite. Mechanical 2017









M 119 Developments of a hot forging die life prediction model. Mechanical 2017

M 120 Computer simulations of natural convection of single phasenano fluids in simple enclosures Mechanical 2017

M 121Experimental investigation of the discharge valve dynamicsin a reciprocating compressor for trans-critical co2refrigeration cycle.

Mechanical 2017

M 122Thermal conductivity and latent heat thermal energy storagecharacteristics of paraffin/expanded graphite composite asphase change material.

Mechanical 2017

M 123Design of a car air conditioning system based on anabsorption refrigeration cycle using energy from exhaustgas of an internal combustion engine

Mechanical 2017

M 124 A compact dynamic model for household vaporcompression refrigerated systems Mechanical 2017

M 125 Stall characteristics and tip clearance effects in forwardswept axial compressor rotors Mechanical 2017

M 126 Effects of axial non-uniform tip clearances on aerodynamicperformance of a transonic axial compressor Mechanical 2017

M 127 Performance and internal flow of sirocco fan using contra-rotating rotors Mechanical 2017

M 128 Natural convective heat transfer from narrow vertical plates Mechanical 2017

M 129 Effect of edge conditions on natural convective heat transferfrom narrow vertical plates Mechanical 2017

M 130 Force-fed micro channels for high flux cooling application. Mechanical 2017

M 131 Thermal-hydraulic analysis of a 600 mw supercritical cfbboiler with low mass flux. Mechanical 2017

M 132 Composite material analysis on a car door by the material e-glass epoxy & s-2 glass epoxy. Mechanical 2017

M 133 Design evaluation of medical wheel chair Mechanical 2017

M 134 Coupled field analysis of a chimney used in cement industry Mechanical 2017









M 135 Stress analysis of functionally graded discs undermechanical and thermal loads Mechanical 2017

M 136 Mono composite leaf spring for light weight vehicle-design Mechanical 2017

M 137 Modeling and analysis of connecting rod of four strokesingle cylinder engine for optimization of cost & material Mechanical 2017

M 138 Design evaluation of a heavy vehicle chassis by usingmaterials e- glass epoxy & s-2 glass epoxy. Mechanical 2017

M 139 Connecting rod optimization for weight and cost reduction Mechanical 2017

M 140 Non linear dynamic analysis of crankshaft used in twowheeler Mechanical 2017

M 141 Fabrication of helical spring load testing machine Mechanical 2017

M 142 Fabrication of letter punching machine Mechanical 2017

M 143 Fabrication of hydraulic u-type, v-type, l-type angle bendingmachine Mechanical 2017

M 144 Fabrication of dual fuel vehicle (gas and petrol bike) Mechanical 2017

M 145 Fabrication of solar parabolic trough collector with autotracking Mechanical 2017

M 146 Advanced collision avoidance solar powered robot car with Mechanical 2017

M 147 Automatic charger – seek for sun light and charges whenthe battery goes down Mechanical 2017

M 148 Experimental investigation solar pond integrated with pcmstorage Mechanical 2017

M 149 Electrical power generation system by using gasifier Mechanical 2017

M 150 Fabrication of buggy with solar hybrid vehicle Mechanical 2017

M 151 Sterling engine with solar parabolic collector Mechanical 2017









M 152 Intelligent solar oil skimmer robot Mechanical 2017

M 153 Fabrication of solar refrigeration system Mechanical 2017

M 154 Artificial intelligent based solar vehicle Mechanical 2017

M 155 Fabrication of hybrid human power generation withovercharge indication Mechanical 2017

M 156 Water fuel engine with power generation Mechanical 2017

M 157 Solar powered vapour absorption ice maker Mechanical 2017

M 158 Solar panel duel axis tracking system Mechanical 2017

M 159 Solar powered remote controlled aircraft Mechanical 2017

M 160 Solar powered unaided guided vehicle (solar ugv) Mechanical 2017

M 161 Solar powered automatic temperature controller withcooling system Mechanical 2017

M 162 Sms controlled solar vehicle for industrial application Mechanical 2017

M 163 Fabrication of solar powered thermo-electric refrigerator Mechanical 2017

M 164 Fabrication of solar seed dryer Mechanical 2017

M 165 Fabrication of solar car Mechanical 2017

M 166 Fabrication of solar wheel chair for physically disabled Mechanical 2017

M 167 Solar sterling engine Mechanical 2017

M 168 Solar water cooler cum room cooling system Mechanical 2017









M 169 Electrical power generation system using railway track Mechanical 2017

M 170 Sms based solar pick and place robot Mechanical 2017

M 171 Solar powered path finding vehicle Mechanical 2017

M 172 Solar intelligent vehicle (car model) Mechanical 2017

M 173 Solar powered automatic fire fighting robot Mechanical 2017

M 174 Fabrication of pelton wheel turbine Mechanical 2017

M 175 Fabrication of solar powered remote controlled weaponsystem Mechanical 2017

M 176 Fabrication of solar air cooler with heater Mechanical 2017

M 177 Solar powered remote controlled bomb detecting robot Mechanical 2017

M 178 Fabrication of solar automobile fridge Mechanical 2017

M 179 Fabrication of pc based solar car Mechanical 2017


M 181 Solar automated guided vehicle (solar agv) Mechanical 2017

M 182 Fabrication of solar air cooler Mechanical 2017

M 183 Fabrication of solar irrigation system Mechanical 2017

M 184 Solar automobile air conditioner Mechanical 2017

M 185 Remote controlled solar powered handicapped tilting wheelchair Mechanical 2017









M 186 Fabrication of solar railway track crack detecting vehicle Mechanical 2017

M 187 Electrical power generation using speed breaker Mechanical 2017

M 188 Banana fiber reinforcement tiles Mechanical 2017

M 189 Fabrication of decorticator seed kernel extractor Mechanical 2017

M 190 Fabrication of maize de-husker Mechanical 2017

M 191 Solar powered agricultural water pumping system with autotracking Mechanical 2017

M 192 Fabrication of multi-agri cutter Mechanical 2017

M 193 Automatic packing control machine Mechanical 2017

M 194 Automatic vegetable (or) lemon cutting machine Mechanical 2017

M 195 Fabrication of hydraulic 3 axis modern trailer Mechanical 2017

M 196 Fabrication of three axis electrical crane Mechanical 2017

M 197 Fabrication of seeds sprayer Mechanical 2017

M 198 Fabrication of groundnut harvester Mechanical 2017

M 199 Automatic grass cutting robot Mechanical 2017

M 200 Finger print based anti theft steering system Mechanical 2017

M 201 Automatic reverse locking system using differential unit Mechanical 2017

M 202 Magnetic and non magnetic material sorting machine Mechanical 2017









M 203 Intelligent secure and privacy parking through ir sensor Mechanical 2017

M 204 Automatic pvc pipe feeding and cutting machine Mechanical 2017

M 205 Hybrid power consumption in train with pneumatic bumper Mechanical 2017

M 206 Fabrication of pneumatic belt conveyor Mechanical 2017

M 207 Fabrication of pneumatic bending/bend removing machine Mechanical 2017

M 208 Fabrication of hydraulic pipe bending machine Mechanical 2017

M 209 Highways high speed sensing and automatic pneumaticbraking system Mechanical 2017

M 210 Fabrication of automatic pneumatic chapatti makingmachine Mechanical 2017

M 211 Fabrication of pneumatic auto gear changer Mechanical 2017

M 212 Automatic sensor operated pneumatic braking system Mechanical 2017

M 213 Automatic distance measurement and braking system byusing ultrasonic waves Mechanical 2017

M 214 Fabrication of pneumatic cargo weight lifter Mechanical 2017

M 215 Automatic pneumatic double axis welding machine Mechanical 2017

M 216 Sensor operated automatic ramming machine Mechanical 2017

M 217 Pneumatic auto indexing drilling machine Mechanical 2017

M 218 Automatic pneumatic paper cup folding machine Mechanical 2017










M 220 D & f of pneumatic injection moulding machine Mechanical 2017

M 221 Remote controlled car/bus pneumatic door open/closemechanism Mechanical 2017

M 222 Fabrication of pneumatic 4-axis jcb equipment Mechanical 2017

M 223 Accident avoiding system for heavy cutting machine Mechanical 2017

M 224 Fabrication of pneumatic automatic sheet cutting machine Mechanical 2017

M 225 Cell phone controlled pneumatic 4-axis material handlingequipment Mechanical 2017

M 226 Pneumatic operated emergency braking system (ebs) Mechanical 2017

M 227 Fabrication of smart shock absorber Mechanical 2017

M 228 Compressed air production using vehicle suspensor Mechanical 2017

M 229 Automatic bar feeding mechanism for hack saw machine Mechanical 2017

M 230 Automatic electro-hydraulic braking system for fourwheeler Mechanical 2017

M 231 Fabrication of cnc pneumatic punching machine Mechanical 2017

M 232 Fabrication of automatic pneumatic jack for four wheeler Mechanical 2017

M 233 Refrigeration using waste heats in car Mechanical 2017

M 234 Experimental investigation solar pond integrated with pcmstorage Mechanical 2017

M 235 Fabrication of solar fridge. Mechanical 2017

M 236 Design & fabrication of chemical processing plant. Mechanical 2017









M 237 Fabrication of solar water disalation (purification) by usingparabolic methode. Mechanical 2017

M 238 Fabrication of solar air cooler cum heater. Mechanical 2017

M 239 Remote controlled boiler flame adjustment system. Mechanical 2017

M 240 Solar water purification by using thermal method. Mechanical 2017

M 241 Water cooler cum water heater by using refrigerationsystem Mechanical 2017

M 242 Three in one air conditioner Mechanical 2017

M 243 Automatic temperature controller with cooling system Mechanical 2017

M 244 Water cooler cum air conditioner Mechanical 2017

M 245 Fabrication of thermo-electric refrigerator Mechanical 2017

M 246 Fabrication of gear cutting attachment in lathe Mechanical 2017

M 247 Automatic cleaning board by using rack and pinion Mechanical 2017

M 248 Pneumatic six axis material handling robot Mechanical 2017

M 249 Shock observer power generation system Mechanical 2017

M 250 Fabrication of abrasive jet machine Mechanical 2017

M 251 Loading and unloading in automated cnc lathe Mechanical 2017

M 252 Design & fabrication of telescopic railway gate Mechanical 2017

M 253 Energy conservation in steam systems Mechanical 2017









M 254 Pneumatic hacksaw with auto feeding mechanism Mechanical 2017

M 255 Fabrication of fork lift Mechanical 2017

M 256 Fabrication of automatic multi point grease gun Mechanical 2017

M 257 Fabrication of mini vertical lathe Mechanical 2017

M 258 Fabrication of eccentric shear cutting machine Mechanical 2017

M 259 Pneumatic three axis modern trailer Mechanical 2017

M 260 Fabrication of furnace using infrared lamp Mechanical 2017

M 261 Fabrication of double axis pneumatic jcb Mechanical 2017

M 262 Fully automated hydraulic crane Mechanical 2017

M 263 Fabrication of ground driller Mechanical 2017

M 264 D & f of automatic coil winding machine Mechanical 2017

M 265 Automatic pneumatic grinding machine Mechanical 2017

M 266 Robot controlled vacuum cleaner Mechanical 2017

M 267 Fabrication of multi drill holder Mechanical 2017

M 268 Fabrication of six stroke engine (model) Mechanical 2017

M 269 Intelligent oil skimmer robot Mechanical 2017

M 270 Automated guided vehicle (agv) Mechanical 2017









M 271 Fabrication of solar race car Mechanical 2017

M 272 Fabrication of wind energy vehicle Mechanical 2017

M 273 Fabrication of air engine Mechanical 2017

M 274 Fabrication of multi-fuel engine Mechanical 2017

M 275 Fabrication of hybrid vehicle Mechanical 2017

M 276 Fabrication of pneumatic auto gear changer Mechanical 2017

M 277 Auto indexing gear cutting attachment for pneumaticshaping machine. Mechanical 2017

M 278 Over speed indication and automatic accident avoidingsystem for four wheeler. Mechanical 2017

M 279 Electrical power generation and refrigeration by using wasteheat from ic engine. Mechanical 2017

M 280 Fabrication of air engine with d.c air compressor. Mechanical 2017

M 281 Fabrication of automatic pneumatic disc braking system. Mechanical 2017

M 282 Advanced electric car with regenerative braking & digitallocking system. Mechanical 2017

M 283 Fabrication of twin cylinder electromagnetic vehicle engine. Mechanical 2017

M 284 Fabrication of turbo charger for two wheelers. Mechanical 2017


M 286 Automatic side stands with brake locking system. Mechanical 2017

M 287 Fabrication of multiple car safety system in bumper. Mechanical 2017









M 288 Fabrication of eddy current braking system. Mechanical 2017

M 289 Fabrication of weighing bridge in moving vehicle. Mechanical 2017

M 290 Generation of electricity using the flow or velocity ofvehicle exhaust gas. Mechanical 2017


M 292 Fabrication of variable volume engine. Mechanical 2017

M 293 Dual power generation system for automobile(thermoelectric + exhaust gas power generation). Mechanical 2017

M 294 Fabrication of tyre pressure inflation system. Mechanical 2017

M 295 Fabrication of three axis pneumatic modern tractor. Mechanical 2017

M 296 Fabrication of safety mechanism for vehicle (clutch lock). Mechanical 2017

M 297 Integrated drunk and drive prevention system. Mechanical 2017

M 298 Fabrication of anti theft steering system. Mechanical 2017

M 299 Automatic electro-magnetic gear transmission for twowheelers. Mechanical 2017

M 300 Automatic clutch and brake system for four wheelers. Mechanical 2017

M 301 Experimental investigation of an air conditioning systemdrive by lpg engine. Mechanical 2017

M 302 Fabrication of electro magnetic suspension. Mechanical 2017

M 303 Emission tester (co2) for automobile. Mechanical 2017

M 304 Automatic head light dim and bright controller with engineoverheating alarm Mechanical 2017









M 305 Efficient car parking system for four wheelers. Mechanical 2017

M 306 Fabrication of hydrogen engine with load tests Mechanical 2017

M 307 Emission control in two stroke petrol engine by usingmultiple sparks. Mechanical 2017

M 308 Sterling engine with parabolic collector (model). Mechanical 2017

M 309 Automatic vehicle locking system by without helmet. Mechanical 2017

M 310 Fabrication of multi nut (wheel) tighter and looser. Mechanical 2017

M 311 Fabrication of three axis pneumatic modern trailer. Mechanical 2017

M 312 Gps based automatic vehicle accident information system. Mechanical 2017

M 313 Fabrication of dual brake single liver system for twowheelers. Mechanical 2017

M 314 Fabrication of hydraulic break show riveting machine.. Mechanical 2017

M 315 Quick lifting jack with gear arrangement. Mechanical 2017

M 316 Air compressor using crank and slotted link mechanism Mechanical 2017

M 317 Gps based automatic vehicle accident information system Mechanical 2017

M 318 Elimination of chain drive in by-cycle Mechanical 2017

M 319 Fabrication of dual brake single liver system for twowheelers Mechanical 2017

M 320 Regenerative braking using pneumatic interface Mechanical 2017

M 321 Automatic break failure indicator and engine over heatingalarm Mechanical 2017









M 322 Fabrication of digital gear level indicator for four wheeler Mechanical 2017

M 323 Fabrication of hydraulic break show riveting machine Mechanical 2017

M 324 Fabrication of shock observer power generation system. Mechanical 2017

M 325 Fabrication of pneumatic disc braking system (pdbs) Mechanical 2017

M 326 Fabrication automatic lawn mover. Mechanical 2017

M 327 Quick lifting jack with gear arrangement Mechanical 2017

M 328 Fabrication of pedal operated cell phone charger Mechanical 2017

M 329 Fabrication of automatic reserve indication system Mechanical 2017

M 330 Fabrication of shock observer power generation system Mechanical 2017

M 331 Fabrication of nitrogen air vehicle with load test Mechanical 2017

M 332 Fabrication automatic lawn mover Mechanical 2017


M 334 Automatic visitor guided with material handling vehicle Mechanical 2017




M 338 Gps based vehicle root tracking system Mechanical 2017









M 339 Automatic rain operated wiper and head light dim/brightcontroller Mechanical 2017

M 340 Fabrication of automatic railway gate controller Mechanical 2017

M 341 Smart shock absorber for automobile Mechanical 2017

M 342 Fabrication of digital fuel level indicator Mechanical 2017

M 343 Elimination of carbon particles from exhaust gas Mechanical 2017


M 345 Fabrication of wireless tire pressure monitoring system Mechanical 2017



wingz technologies - ieee mechcanical projects 2017

Education