wireless human health

8/3/2019 Wireless Human Health

http://slidepdf.com/reader/full/wireless-human-health 1/17



Recently the health care sensors are playing a vital role in

hospitality.

The patient monitoring systems is one of the majorimprovement in the hospitality because of its advanced

technology.

A wireless patient monitoring system to measure heartbeat andbody temperature by using embedded technology.



Introduction Existing System

Drawbacks

Main Objectives

Proposed Methods

Modules

Block Diagram

Working of system

Advantages

Conclusion

Future Scope



In general, a compact sensor, is used to monitor the heartbeat

in analog form and to check the condition of the patient we

required some more components such as thermometer.

So we are here, just connected the temperature sensor and

heart beat sensor so that simultaneously we can monitor the

patient’s condition.

An embedded technology is used instead of dsp technology to

develop this system so that it is easy to operate and availableat an affordable cost.



There are some systems present in the market but all are

having some difficulties

Compact sensor

Digital Heartbeat monitor



The systems are not atomized

The patient cant able to understand the analog signals.

Complex system and difficult to operate.



To overcome the disadvantages of previous systems

The specialist staying at a distance can monitor the patient

condition so that he can save the life of the patient.

This system is to be available at reasonable prices.

Embedded technology is to be use so that we can monitor the

patient condition easily.



An advanced technique “WIRELESS HUMAN HEALTH

MONITOR” is used.

There are mainly two parts of the system one is transmitter

and the other one is receiver.

The transmitter is placed near the patient and the receiver is

with the specialist doctor. So when there is any abnormality in

the patient’s condition then he can monitor the situation.



An Embedded technology is used here.

Atmel (AT89S52) is used in this system.

GSM technology is used to transmit and receive the data.

To operate more easily we are using this type of

microcontroller instead of dsp technology.

To reduce the complexity



Fig: transmission side



Fig: Communication Channel

Tx Rx



Fig: Receiving side

Communication

Channel



There are mainly two parts of the system one is transmitter

and the other one is the receiver In the transmitter, We have Heartbeat sensor and the

temperature sensor.

All the sensors are connected to the patient

The microcontroller monitors the all the system in thetransmitter if any abnormality in the patient condition then it

sends the signal so that the receiver will capture the signal and

will work according to that.

WORKING OF THE SYSTEM



The staying of specialist is eliminated.

It is a multipurpose so that overall conditions are easily

measured.

Easy to operate.

Compare with compact sensor it gives better performance.



Modern technologies have developed that promotes

comfortable and better life which is disease free.

PREVENTION IS BETTER THAN CURE



Multiple parameters like Blood pressure, retinal size, age

and weight can be included as controlling parameters in the

future.

This system also developed by using advanced GSM

technology in future.



THANK YOU

ANY QUERIES?

wireless human health

Documents