wmg atex1 r03 englisch - taciak ag nordkirchentaciak.de/assets/produkte/wegsensoren/t43.0reed... ·...
TRANSCRIPT
for the mining industry,for the mining industry, for use in for use in hazardous environmental hazardous environmental conditionsconditions
Reed Position SensorsReed Position Sensors
POSITION SENSORS for hazardous
environmental conditions
Electrotechnical Engineering
Ele
ctr
ote
ch
nic
al
En
gin
ee
rin
g
Position Sensors Page 2 Microelectronic Systems Level Control Systems Mechatronic
T A C I A K AG -
Electrotechnical EngineeringElectrotechnical Engineering
TACIAK AG Manufakturing Program
Taciak AG Technology for Measuring
Electric-Mechanical applications for any branch of industry or craft
Taciak AG supplies high standard modules as individual components or as complete systems for installations. We provide for a very efficiant linkage between mechanical, electrical and informatic components.
Automation Technology, Control Boxes and Cord Sets We supply automation technology according to customer request. Systems for complete installations for industry and craft.
Level Control for Liquids We are specialised in the development and manufacture of level sensors on the base of Reed Contacts for individual components and complete systems. Position Sensor for Hydraulic Cylinders Essentially for the use under hazardous environmental conditions we develope and manufac-ture position transducers on the base of Reed contacts mainly for the mining industry and for Eex i a... as well. Quality Control ATEX products explosionproof acc. to 94/9 EG Based on the EN/ISO 9001 of:EXAM BBG Prüf- und Zertifizier GmbH “0158”
T A C I A K AG
Reed – Position Transducer Type WMG acc. to Type with attestation of conformity : BVS Nr.: 91C1095
acc. to Type with attestation of design : MPA-NRW-HS-043-96
acc. to Type with attestation of conformity : BVS 03 ATEX E 166X
Principle of Operation
Position tranducers on the principle of Reed contacts consist of a closed compression proof tube of stainless steel with an internal electronic unit. A ring magnet operates contactless from outside reed contacts and records a measuring voltage from a high impedance measuring unit. The processed signal will then be short circiut proof and alternation safe available. MODE of connection : a) Cable acc. to code of types (up to 12m length ) b) Connectors to code of types c) Customer defined
Ratings: System of protection: DIN 40050 IP 65 Explosionproof type of protection :acc. to classification Group l and ll, intrinsically safe to ia, Input voltage : acc. to Type Tolerances: rated voltage +/- 5% Output data : acc. to Type Operating pressure : acc. to Type Test pressure :1,5 x Operating pressure, max. 1 min Interior capacity and inductivity : negligible Printed board : Epoxyd-Glasfiber Type FR 4 Ferozell, 1,5 mm, Casting compound : Tracking resistance =/>90 Identification :Engraving on front side of cable inlet plug. Quality checks : during manufacturing process, final inspection with certificate to ATEX 94/9 EG.
Position Sensors Page 3 Microelectronic Systems Level Control Systems Mechatronic
Electrotechnical EngineeringElectrotechnical Engineering
T A C I A K AG
N
ame
El
ectr
ical
Dat
a
Elec
tric
Con
nect
ion
C
able
Len
gth
mm
M
ater
ial
Tube
Dia
met
er
Des
ign
Ty
pes
„BF“
Pr
essu
re
Acce
ssor
ies
Sele
ctiv
ity
Mea
surin
g Le
ngth
m
m
aMG
bb
. cc
. dd
d.
ee.
ff.
g.
h.
ii.
jjjj
WM
G
NM
G
01=
12V
/0,5
-4,5
V
11=
12V/
0,5-
4,5
V 05
= 0-
25 KΩ
/m/2
4V
06=
0-50
KΩ
/m/2
4V
51=
100-
XXXX
Ω/5
V 52
= 20
0-XX
XX Ω
/5V
53=
400-
XXXX
Ω /1
2V
54=
1000
-XXX
X Ω
/24V
71
= 24
V/0,
5-4,
5 V
72=
24V/
1-5
V 73
= 24
V/1-
10V
81=
24V/
4-20
mA
2-D
raht
82
= 24
V/4
-20
mA
3-D
raht
B
old
face
prin
ted:
Pr
efer
red
type
s w
ith
ATE
X-A
ppro
val
00=S
peci
al d
esig
n
01=
Plug
M8x
1mm
02
= Pl
ug M
12x1
mm
05
= So
cket
M12
x1m
m
11=
Con
nect
or B
ox
21=
Plug
DIN
436
50
51=
Sing
le L
eads
55
= W
ire 3
x0,1
4 m
m²
56=
Wire
2x2
x0,1
4 m
m²
57=
Wire
3x2
x0,1
4 m
m²
58=
Wire
4x2
x0,1
4 m
m²
59=
Wire
5x2
x0,1
4 m
m²
65=
Wire
3x0
,25
mm
² 66
= W
ire 2
x2x0
,25
mm
² 67
= W
ire 3
x2x0
,25
mm
² 75
-89=
Shi
elde
d W
ires
75=
Wire
3x0
,14
mm
² 76
= W
ire 2
x2x0
,14
mm
² 77
= W
ire 3
x2x0
,14
mm
² 85
= W
ire 3
x0,2
5 m
m²
00=S
peci
al d
esig
n
x 10
mm
fo
r exa
mpl
e:
005=
50
mm
15
0= 1
500
mm
00
00=
Sp
ecia
l des
ign
Stai
nles
s St
eel
1.45
71
01=
12x1
mm
02
= 14
x1 m
m
03=
16x1
mm
04
= 16
x1,5
mm
05
= 18
x2 m
m
06=
24x4
mm
07
= 14
x2 m
m
PVC
-U
51=
12x1
,0 m
m
53=
14x1
,0 m
m
55=
16x1
,2 m
m
61=
20x2
,3 m
m
00=
Spec
ial d
esig
n
Acc
. to
Dra
wg.
01
= B
F X
02=
BF
Y 03
= B
F Z
04=
BF
U
05=
BF
V 06
= B
F W
21
= B
F A1
22
= B
F A2
23
= B
F A3
24
= B
F B
1 25
= B
F B
2 26
= B
F B
3 29
= B
F C
3 30
= B
F D
1 31
= B
F D
2 32
= B
F D
3 00
= Sp
ecia
l des
ign
1= 6
bar
2=
16
bar
3= 2
5 ba
r 4=
100
bar
5=
200
bar
6=
300
bar
7=
400
bar
8=
500
bar
9=
600
bar
0=
100
0 ba
r 0=
Sp
ecia
l des
.
1= 1
x PT
100
2=
2x
PT 1
00
3= 3
X PT
100
4 5 6 7 8=
1 C
onta
ct
9= 2
Con
tact
s
0= =
no
Acce
ssor
ies
01=
1 m
m
02=
2 m
m
03=
3 m
m
04=
4 m
m
05=
5 m
m
06=
6 m
m
08=
8 m
m
12=
12 m
m
16=
16 m
m
20=
20 m
m
24=
24 m
m
00=
Spec
ial d
es.
for
exam
ple:
07
50=
750
m
m
1500
= 15
00
m
m
Plea
se
note
: M
easu
ring
leng
th
mea
ns
activ
e
leng
th o
f th
e
mea
surin
g st
ick
and
not t
he to
tal
leng
th o
f th
e un
it.
App
rova
ls:
BVS
Nr.:
91C
1095
A
ttest
atio
n of
con
form
ity fo
r:
:
WM
G 0
1 (M
inin
g ve
rsio
n, a
cc. t
o AT
EX re
plac
ed b
y W
MG
11)
MPA
-NR
W-H
S043
-96
A
ttest
atio
n of
des
ign
for:
: W
MG
01
/ 05
/ 06
(mec
hani
cally
iden
tical
with
all
WM
G –
Typ
es)
B
VS 0
3 AT
EX E
166
X
Atte
stat
ion
of c
onfo
rmity
Gro
up I
and
II va
lid fo
r:
: W
MG
und
NM
G 1
1 / 0
5 / 0
6 / 5
1 –
54 /
71 –
73
and
81
Man
ufac
ture
:
ATEX
– P
rodu
cts
exp
losi
onpr
oof a
cc. t
o 94
/9 E
G
B
ased
on
EN
/ISO
900
1 by
: EXA
M-B
BG
Prü
f- un
d Ze
rtifi
zier
Gm
bH,
D-4
4809
Boc
hum
Type
Spe
cific
atio
n: „
Posi
tion
Sens
or/T
rans
duce
r and
Lev
el S
enso
r/Tra
nsdu
cer”
Position Sensors Page 4 Microelectronic Systems Level Control Systems Mechatronic
Electrotechnical EngineeringElectrotechnical Engineering
T A C I A K AG
Application : Transducer, installed in hydraulic cylinders for use under operating pressure.
BVS Nr.: 91C1095
MPA-NRW-HS-043-96 Wiring diagram:
Stainless Steel Reed-Sensor/Transducer: WMG01 12 V-DC / 0,5 - 4,5 V
Type Specifikation „ Position Sensor/Transducer “
Any length between 30 and 1500 mm is available with an attestation of conformity or attestation of design respectively.
Examples for Ordering:
Name Electrical Data
Electric Connection Cable Length mm
Material Tube diam.
Design Types „BF“
Pressure Accesso-ries
Selec-tivity
Measuring Length mm
WMG bb. cc. ddd. ee. ff. g. h. ii. jjjj.
WMG
01= 12/0,5-4,5 V
02= Plug M12x1mm 55= Wire 3x0,14 mm² 65= Wire 3x0,25 mm² 00=Special design
x 10 mm for e-xample: 005= 50 mm 150= 1500 mm etc.
Stainless Steel 1.4571 05= 18x2 mm 06= 24x4 mm
acc. to Drawg. 01= BF X.A0 02= BF Y.A0 03= BF Z.A0 04= BF U.A0 05= BF V.A0 06= BF W.A0
7= 400 bar
0= no acces-sories
03= 3 mm 04= 4 mm 06= 6 mm
For example: 0750= 750 mm 1500= 1500 mm Please note: Measuring length means active length of the measuring stick and not the total length of the unit.
Admissions: BVS Nr.: 91C1095 attestation of conformity valid for WMG 01 (will be replaced by WMG 11 acc. to ATEX) MPA-NRW-HS043-96 attestation of design valid for WMG 01 / 05 / 06 (mechanically identic with all WMG – Types)
Our Code No.: Type Specifikation
Measuring Length:
mm
Total Length: mm
Classification to BVS
Nr.: 91 C1095
8A01xxxx WMG01.c c.d d d.e e.f f.g .h.i i.j j j j from 30 to 1500 EEx ia I
8A010500 WMG01.02.020.05.01.7.0.04.0500 500 650 EEx ia I
8A010501 WMG01.55.020.05.01.7.0.04.0500 500 650 EEx ia I
8A010750 WMG01.02.020.05.01.7.0.04.0750 750 900 EEx ia I
8A011000 WMG01.02.020.05.01.7.0.04.1000 1000 1150 EEx ia I
Electrotechnical EngineeringElectrotechnical Engineering
Position Sensors Page 5 Microelectronic Systems Level Control Systems Mechatronic
T A C I A K AG
Stainless Steel Reed-Sensor/Transducer: WMG 11 12 V-DC / 0,5 - 4,5 V WMG 71 12-28 V-DC / 0,5 - 4,5 V WMG 72 12-28 V-DC / 1,0 - 5,0 V WMG 73 12-28 V-DC / 1,0 - 10,0
Any length between 30 and 1500 mm is available with an attestation of conformity or attestation of design respectively.
Type Specifikation „ Position Sensor/Transducer “
Examples for Ordering: „A“= with ; „B“= without attestation of conformity
Wiring diagram: With attestation of conformity group I and II for use with an intrinsically safe power supply.
Name Electrical Data Electric Connection Cable Length mm
Material Tube Diameter
Design Types „BF“
Pressure Accesso-ries
Selec-tivity
Measuring Length mm
WMG bb. cc. ddd. ee. ff. g. h. ii. jjjj.
WMG
11= 12/0,5-4,5 V 71= 30V/0,5-4,5 V 72= 30V/1-5 V 73= 30V/1-10V
00= Special design
01= Plug M8x1mm 02= Plug M12x1mm 51= Single Leads 55= Wire 3x0,14 mm² 56= Wire 2x2x0,14 mm² 57= Wire 3x2x0,14 mm² 58= Wire 4x2x0,14 mm² 65= Wire 3x0,25 mm² 75-89= Shielded Wires 75= Wire 3x0,14 mm² 76= Wire 2x2x0,14 mm² 77= Wire 3x2x0,14 mm²
00=Special design
x 10 mm for example:
005= 50 mm 150= 1500 mm etc. 0000= Special design
Stainless Steel 1.4571
05= 18x2 mm 06= 24x4 mm 07= 14x2 mm 00= Special design
Acc. To Drawg. 01= BF X.A0 02= BF Y.A0 03= BF Z.A0 04= BF U.A0 05= BF V.A0 06= BF W.A0 00= Special design
4= 100 bar 5= 200 bar 6= 300 bar 7= 400 bar 0= Special design
1= 1x PT 100 2= 2x PT 100 3= 3X PT 100 4 5 6 7 8= 1 Contact 9= 2 Contacts 0= no accessories
02= 2 mm 03= 3 mm 04= 4 mm 06= 6 mm 08= 8 mm 00= Special design
For example.: 0750= 750 mm Please note: Measuring length means active length of measuring stick an not the total length of the unit.
Approvals: BVS 03 ATEX E 166X attestation of conformity Group I and II valid for WMG 11 / 05 / 06 / 51 – 54 / 71 – 73 und 81 Please note: Not all cominations are available with ATEX Attestation of conformity!
Our Code No.: Type Specification
Measuring Length:
mm
Total Length: mm
Classification to No.: BVS 03 ATEX E 166X
8A11xxxx WMG11.c c.d d d.e e.f f.g .h.i i.j j j j from 50 to 3500 II 2 G EEx ia IIC T4 I M2 EEx ia I
8B11xxxx WMG11.c c.d d d.e e.f f.g .h.i i.j j j j from 50 to 3500 without attestation of conformity
8A110750 WMG11.02.020.05.01.7.0.04.0750 750 900 II 2 G EEx ia IIC T4 I M2 EEx ia I
8B110750 WMG11.02.020.05.01.7.0.04.0750 750 900 without attestation of conformity
8A710900 WMG71.55.020.05.01.7.0.04.0900 900 1050 II 2 G EEx ia IIC T4 I M2 EEx ia I
8B720900 WMG72.55.020.05.01.7.0.04.0900 900 1050 without attestation of conformity
Position Sensors Page 6 Microelectronic Systems Level Control Systems Mechatronic
Electrotechnical EngineeringElectrotechnical Engineering
T A C I A K AG
Stainless Steel Reed-Sensor/Transducer: WMG 51 100-XXXX Ω / 5 V WMG 52 200-XXXX Ω / 5 V WMG 53 400-XXXX Ω / 12 V WMG 54 1 KΩ -XX KΩ / 24 V
Wiring diagram: With attestation of conformity group I and II for use with an intrinsically safe power supply.
Type Specification „Position Sensor/Transducer“
Examples for Ordering: „A“= with ; „B“= without attestation of conformity
Any length between 30 and 1500 mm is available with an attestation of conformity or attestation of design respectively.
Our Code No.: Type Specification
Measuring Length:
mm
Total Length:
mm
Classification to No.: BVS 03 ATEX E 166X
8A51xxxx WMG51.c c.d d d.e e.f f.g .h.i i.j j j j from 50 to 3630 II 2 G EEx ia IIC T4 I M2 EEx ia
8B51xxxx WMG51.c c.d d d.e e.f f.g .h.i i.j j j j from 50 to 3630 without attestation of conformity
8A510750 WMG51.02.020.05.01.7.0.04.0750 750 880 II 2 G EEx ia IIC T4 I M2 EEx ia
8B510751 WMG51.55.020.05.01.7.0.04.0900 750 880 without attestation of conformity
8A530900 WMG53.55.020.05.01.7.0.04.0900 900 1030 II 2 G EEx ia IIC T4 I M2 EEx ia
8B540900 WMG54.55.020.05.01.7.0.04.0900 900 1030 without attestation of conformity
Name Electrical Data
Electric Connection Cable Length mm
Material Tube diam.
Design Types „BF“
Pressure Accesso-ries
Selec-tivity
Measuring Length mm
WMG bb. cc. ddd. ee. ff. g. h. ii. jjjj.
WMG
51= 100-X Ω/5V 52= 200-X Ω /5V 53= 400-X Ω /12V 54= 1000-X Ω/24V 00= Special design
01= Plug M8x1mm 02= Plug M12x1mm 51= Single Leads 55= Wire 3x0,14 mm² 56= Wire 2x2x0,14 mm² 57= Wire 3x2x0,14 mm² 58= Wire 4x2x0,14 mm² 65= Wire 3x0,25 mm² 75-89= Shielded Wires 75= Wire. 3x0,14 mm² 76= Wire 2x2x0,14 mm² 77= Wire 3x2x0,14 mm² 00=Special design
x 10 mm for e-xample:
005= 50 mm 150= 1500 mm etc. 0000= Special design
Stainless steel 1.4571
01= 12x1 mm 02= 14x1 mm 03= 16x1 mm 04= 16x1,5 mm 05= 18x2 mm 06= 24x4 mm 07= 14x2 mm 00= Special design
Acc. to Drawg.
01= BF X.A0 02= BF Y.A0 03= BF Z.A0 04= BF U.A0 05= BF V.A0 06= BF W.A0 00= Special design
4= 100 bar 5= 200 bar 6= 300 bar 7= 400 bar 0= Special design
1= 1x PT 100 2= 2x PT 100 3= 3X PT 100 4 5 6 7 8= 1 Contact 9= 2 Contacts 0= no Accessories
02= 2 mm 03= 3 mm 04= 4 mm 06= 6 mm 08= 8 mm
00= Special design
for example: 0750= 750 mm Please note: Measuring length means length of the measuring stick and not total length of the unit.
Approvals: BVS 03 ATEX E 166X attestation of conformity Group I und II valid for WMG 11 / 05 / 06 / 51 – 54 / 71 – 73 and 81 Please note: Not all Combinations are available with an ATEX attestation of conformity!
Position Sensors Page 7 Microelectronic Systems Level Control Systems Mechatronic
Electrotechnical EngineeringElectrotechnical Engineering
T A C I A K AG
Stainless Steel Reed-Sensor/Transducer: WMG 81 12-28 V-DC / 4-20 mA 2-Draht WMG 82 12-28 V-DC / 4-20 mA 3-Draht
Any length between 50 and 3500 mm is available with an attestation of conformity or attestation of design respectively.
Type Specification „ PositionSensor/Transducer“
Examples for Ordering: „A “= with ; „B “= without attestation of conformioty
Wiring diagram: With attestation of conformity group I and II for use with an intrinsically safe power supply.
Name Electrical Data
Electric Connection Cable Length mm
Material Tube diam.
Design Types „BF“
Pressure Accesso-ries
Selec tivity
Measuring Length mm
MG bb. cc. ddd. ee. ff. g. h. ii. jjjj.
WMG
81= 24V/4-20 mA 2-wire 82= 24V/4-20 mA 3-wire 00= Special designg
01= Plug M8x1mm 02= Plug M12x1mm 51= Single Leads 55= Wire 3x0,14 mm² 56= Wire 2x2x0,14 mm² 57= Wire 3x2x0,14 mm² 58= Wire 4x2x0,14 mm² 65= Wire 3x0,25 mm² 75-89= Shielded Wires 75= Leit. 3x0,14 mm² 76= Leit. 2x2x0,14 mm² 77= Leit. 3x2x0,14 mm² 00=Special designg
x 10 mm for e-xample:
005= 50 mm 150= 1500 mm etc. 0000= Special designg
Sainless Steel 1.4571
01= 12x1 mm 02= 14x1 mm 03= 16x1 mm 04= 16x1,5 mm 05= 18x2 mm 06= 24x4 mm 07= 14x2 mm 00= Special designg
Acc. to Drawg.
01= BF X.A0 02= BF Y.A0 03= BF Z.A0 04= BF U.A0 05= BF V.A0 06= BF W.A0 00= Special designg
4= 100 bar 5= 200 bar 6= 300 bar 7= 400 bar 0= Special designg
1= 1x PT 100 2= 2x PT 100 3= 3X PT 100 4 5 6 7 8= 1 Contact 9= 2 Contacts 0= no Accessories
02= 2 mm 03= 3 mm 04= 4 mm 06= 6 mm 08= 8 mm 00= Special designg
For example: 0750= 750 mm Please note: Measuring length means active length of the measuring stick and not the total length of the unit
Approvals: BVS 03 ATEX E 166X attestation of conformity Group I and II valid for: WMG 11 / 05 / 06 / 51 – 54 / 71 – 73 und 81 Please note: Not all combinations are available with an ATEX attestation of conformity!
Our code No.: Type Specification
Measuring Length:
mm
Total Length:
mm
Classification to No.: BVS 03 ATEX E 166X
8A81xxxx WMG81.c c.d d d.e e.f f.g .h.i i.j j j j from 50 to 3650 II 2 G EEx ia IIC T4 I M2 EEx ia I
8B81xxxx WMG81.c c.d d d.e e.f f.g .h.i i.j j j j from 50 to 3650 without attestation of conformity
8A810750 WMG81.02.020.05.01.7.0.04.0750 750 900 II 2 G EEx ia IIC T4 I M2 EEx ia I
8B810750 WMG81.02.020.05.01.7.0.04.1000 750 900 without attestation of conformity
8B820900 WMG82.55.020.05.01.7.0.04.0900 900 1050 without attestation of conformity
WMG 81
WMG 82
Position Sensors Page 8 Microelectronic Systems Level Control Systems Mechatronic
Electrotechnical EngineeringElectrotechnical Engineering
T A C I A K AG
Design Types of Fittings
Design Type U scale 1:1 525U01 Entrance fitting Tube = Ø 14mm
Design Type V Design Type W
Customer defined
Design Type X scale 1:1 525X01 Entrance fitting Tube = Ø 18mm
Design Type Y scale 2:1 525Y01 Entrance fitting Tube = Ø 18mm
Design Type Z scale 2:1 525Z01 Entrance fitting (Special fitting) Tube = Ø 18mm
Design Type R scale 1:1 525R01 Entrance fitting Tube = Ø 24mm
Design Type S scale 1:1 525R02 Entrance fitting Tube = Ø 24mm
Design Type T
Design Type O scale 1:1 525O01 Closing plug Tube = Ø 14mm
Design Type P scale 1:1 525P01 Closing plug Tube = Ø 18mm
Design Type Q scale 1:1 525Q01 Closing plug Tube = Ø 24mm
Position Sensors Page 9 Microelectronic Systems Level Control Systems Mechatronic
Electrotechnical EngineeringElectrotechnical Engineering
T A C I A K AG
Ring Magnets for contactless measuring:
Code No.: Type: Size: mm Dia. x bore x height Material:
801071 R 016 29,9 x 17,5 x 20,0 Brass, pressure-proof encapsulated 801081 R 018.1 39,9 x 19,5 x 20,0 Brass, pressure-proof encapsulated
801082 R 018.2 33,9 x 19,5 x 20,0 Brass, pressure-proof encapsulated 801090 R 014 29,9 x 15,5 x 20,0 Brass, pressure-proof encapsulated 801084 R 024 42,9 x 25,5 x 20,5 Brass, pressure-proof encapsulated
Special design on request. Example of installation:
Position Sensors Page 10 Microelectronic Systems Level Control Systems Mechatronic
Electrotechnical EngineeringElectrotechnical Engineering
T A C I A K AG
Conditions of Sale and Payment (Excerpt)
The “General conditions of sale for products and services of the Electrical Industry” will apply exclusively insofar as they do not contradict our following conditions of sale and payment. A customers order acknow-ledgement imposing his conditions of sale will be at variance with this and will also not be accepted unless we give written confirmation of his conditions acceptance. 1. Prices are subject to being sold ex works and without packing
2. The pricelist gives the net price without VAT.
3. Freight and packing is calculated at cost price and not included in our quotation.
4. A discount of 2% is given on payments within ten days.
5. The given delivery time is without obligation, we will endeavour to meet it at all time.
6. The delivered goods remain our property until they are fully paid (reservation of ownership). A sale or processing of goods under reservation of ownership is permitted only with our express written previous consent. An assignment in advance prevails for all rights obtained by resale or process-ing.
7. Our products are designed and made under consideration of the relevant basic safety- and health-standards of the EC. After compliance with all standards an EC attestation of compliance is issued and the product CE-labelled. Any change or modification of a product delivered by us without our written consent will make invalid the EC attestation of conformity.
8. Only parts and assemblies delivered by us and used as directed are covered by the warranty. Consequential damages – no matter what kind – are expressly excluded.
9. D-59394 Nordkirchen-Südkirchen is place of performance. Venue for settlement of disputes shall be D-59348 Lüdinghausen.
Nordkirchen, January 2000 Arnold Taciak
Our conditions of sale and payment will apply exclusively
Position Sensors Page 11 Microelectronic Systems Level Control Systems Mechatronic
Electrotechnical Engineering
Electrotechnical EngineeringElectrotechnical Engineering
o t h e r p r o d u c t s :
Kattenbeck 20 59394 Nordkirchen telephone: 02596/1555 telefax: 02596/1855
email: [email protected] internet:
Electrotechnical Engineering
Ele
ctr
ote
ch
nic
al
En
gin
ee
rin
g