woodworks concealed - select acousticwoodworks ® concealed ceiling systems technical guide key...
TRANSCRIPT
This booklet provides drawings, deta i ls , and speci f icat ion informat ion for WoodWorks Concealed cei l ings.
WOODWORKS ® Concealed
Cei l ing Systems Techn ica l Gu ide
Key Select ion Attr ibutes• Define a space with rich, natural FSC®-certified wood• FSC chain of custody (CoC) certified WoodWorks products represent responsible production and consumption practices from the forest to the consumer
• California Air Resources Board (CARB) compliant• Mix and match three standard panel sizes on the same project• Narrow 1/4" reveal visual • Hook-on panels (for standard 15/16" suspension) provide safe and secure
downward accessibility• Create continuous looks and clouds with new 6" veneer-wrapped and painted aluminum trim available in six coordinating wood finishes and black
• Complete standard system from one manufacturer (grid/panels/trim)• Shorter lead times and lower cost than custom millwork• Factory edge banded for superior quality• Five standard perforations available to enhance acoustical performance
and design aesthetics
Appl icat ions• Healthcare
• Office
• Education
• Hospitality and retail
In th is Booklet (also found on armstrong.com/woodworks)
Page 1 Attributes and Applications
Page 2-3 Installation Details
Page 4-5 2' x 4' Panel Layout Options
Pages 6-7 2' x 6' Panel Layout Options
Pages 8-9 2' x 8' Panel Layout Options
Pages 10-11 Multi-size Panel Layout Options
Page 12-13 Trim Installation Details
B e t w e e n u s , i d e a s b e c o m e r e a l i t y ™
Ceiling SyStemS
I N S T A L L A T I O N D E T A I L S
Step 1: Select Panel Size
Step 2: Order T-bar Hooks Based on Panel Size
2
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
5
2 ' x 4 ' S I N G L E P A N E L L A Y O U T O P T I O N S
Staggered Pattern Assembly – Unperforated
Staggered Pattern Assembly – W2 Perforation
De t a i l V i ew
2 ' x 6 ' P A N E L L A Y O U T O P T I O N S
Basic Assembly
6
To create this design, you will need to order:
Item Pieces
5984W1 – 2' x 6' Unperforated Panel 8
5986 – T-Bar Hooks (4 per Panel) 48 (6 per Panel)
HD Main Beams 6
2' Cross Tees 25
SH12 Support Hanger 3
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
2 ' x 6 ' S I N G L E P A N E L L A Y O U T O P T I O N S
Staggered Pattern Assembly – Unperforated
Staggered Pattern Assembly – W6 Perforation
7
De t a i l V i ew
2 ' x 8 ' P A N E L L A Y O U T O P T I O N S
Basic Assembly
8
To create this design, you will need to order:
Item Pieces
5985W1 – 2' x 8' Unperforated Panel 8
5986 – T-Bar Hooks (4 per Panel) 64 (8 per Panel)
HD Main Beams 8
2' Cross Tees 35
SH12 Support Hanger 6
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
2 ' x 8 ' S I N G L E P A N E L L A Y O U T O P T I O N S
Staggered Pattern Assembly – Unperforated
Staggered Pattern Assembly – W3 Perforation
9
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
Reference Point
10
M U L T I - S I Z E P A N E L L A Y O U T O P T I O N S
Staggered Pattern Assembly – 2' x 4' and 2' x 6' Panels Unperforated
Staggered Pattern Assembly – 2' x 4' and 2' x 8' Panels Unperforated
Reference Point
Reference Point
Reference Point
Reference Point
11
M U L T I - S I Z E P A N E L L A Y O U T O P T I O N S
Staggered Pattern Assembly – 2' x 6' and 2' x 8' Panels Unperforated
12
T R I M I N S T A L L A T I O N D E T A I L S
Step 1: Cut and Miter Trim
Step 2: Attach Clips to Ends of Main Beams and Cross Tees Step 3: Attach Trim to Clips
120"
FinishedStandard
Trim Length
96-5/8"95-13/16"95-1/16"
72-5/8"71-13/16"71-1/16"
72-3/8"71-15/16"71-9/16"
4' LengthMitered onBoth Ends
47-1/16"
48-5/8"
47-13/16"T-Bar Hook Flange
Panel FlangeOutside Edges of Miter
6' LengthMitered on
One End
6' LengthMitered onBoth Ends
8' LengthMitered onBoth Ends
Black Powdercoat Finish
6.0"
FXTBC Location
Flange that alignsT-Bar Hook
Flangethat alignsPanel Edge
6"
FXTBC T-BarConnector Clip
XL7301BL12' HD Main Beam WW Concealed
Trim
FXTBC T-BarConnector Clip
13
Step 5: Install Panels
T R I M I N S T A L L A T I O N D E T A I L S
Step 4: Install Splice Plates
FX4SPLICESplice Plate
WW ConcealedTrim
FXTBC T-BarConnector Clip
XL7301BL12' HD Main Beam
WW ConcealedT-Bar Hook
For a basic cloud assembly with 2' x 6' panels, you will need to order:
Item Pieces
59841W1 - 2' x 6' Unperforated Panel 65986 – T-Bar Hooks 36HD Main Beams 62' Cross Tees 101' Cross Tees 4SH12 Support Hanger 2FXTBC T-Bar Connector Clips 16FX4SPLICE Splice Plates 126603W1 Trim 6
1 877 ARMSTRONG (276-7876)
TechLine – Technical information
8 a.m. to 5:30 p.m. EST
Monday through Friday
FAX 1-800-572-8324 or
email: [email protected]
armstrong.com/woodworks
B e t w e e n u s , i d e a s b e c o m e r e a l i t y ™
Ceiling SyStemS
TechLineSM / 1 877 ARmSTRONG 1 877 276 7876
armstrong.com/woodworksCS-4274-1011
All trademarks used herein are the property of AWI Licensing Company and/or its affiliates© 2011 AWI Licensing Company • Printed in the United States of America