wsaa product appraisal certificate · any enquiries regarding this certificate should be directed...

PA 1508 Part 1 Issue 5 Rev 0 of 30

WSAA PRODUCT APPRAISAL CERTIFICATE

REHAU Pty Ltd – REHAU AWASHAFT DN 400 / DN 600 / DN 800 / DN 1000 Polypropylene (PP) Maintenance Shafts, Chambers and Holes

The scope of this appraisal applies to the REHAU AWASHAFT DN 400 / DN 600 / DN 800 / DN 1000 Polypropylene (PP) Maintenance Shaft, Chamber and Hole units and assemblies as listed in the attached Schedules A and B.

Product Category Polypropylene (PP) Maintenance Shafts, Chambers and Holes

PA Number: PA 1508 Par1 Issue 6 (Certificate)

Supplier REHAU Pty Ltd

Brand REHAU AWASHAFT

Standards WSA 137:2019 Issue 3 - Industry standard for Unplasticized polyvinyl chloride) (PVC-U), polypropylene (PP) and Polyethylene (PE) maintenance shafts, maintenance chambers and maintenance holes for sewerage

WSAA Product Specification

WSA PS-341 Maintenance Shafts (MS) – Polypropylene (PP) for Non-Pressure Applications – Sewerage

WSA PS-337 Maintenance Chambers (MC) – Polypropylene (PP) for Non-Pressure Applications – Sewerage

WSA PS-340 Maintenance Holes (MH) – Polypropylene (PP) for Non-Pressure Applications – Sewerage

Other Specifications

Issue date 22 October 2019

Expiry date 9 March 2023

Recommendations It is recommended that WSAA members and associates, subject to any specific requirements, accept / authorise the REHAU AWASHAFT DN 400 / DN 600 / DN 800 / DN1000 Polypropylene (PP) Maintenance Shaft, Chamber and Hole base units and assemblies as listed in Schedule B provided in pipeline design, installation, acceptance testing and commissioning in accordance with applicable WSAA Codes and the manufacturer’s requirements where specified.

Disclaimer The disclaimer on Page 2 explains a number of very important limits on your ability to rely on the information in this Product Appraisal Certificate (Certificate) and the assessment criteria used to underlay it. Please read it carefully and take it into account when considering the content in this Certificate.


1. Disclaimer

This Product Appraisal Certificate (Certificate) is issued by WSAA on the understanding that:

This Certificate applies to the product(s) as submitted in Schedule A. Any changes to the product(s) either minor or major shall void this Certificate.

To maintain the recommendations of this Certificate any such changes shall be detailed and notified to the Product Appraisal Manager for consideration and review of the Certificate including the product appraisal criteria underlying it and appropriate action. Appraisals and their recommendations will be the subject of continuous review dependent upon the satisfactory performance of products.

WSAA reserves the right to undertake random audits of product manufacture and installation. Where products fail to maintain appraised performance requirements the appraisal and its recommendations may be modified and reissued. Certificates will be reviewed and reissued at regular intervals not exceeding five (5) years.

WSAA reserves the right to withdraw this Certificate at any time in its sole and absolute discretion for any reason.

The following information explains a number of very important limits on your ability to rely on the information in this Certificate. Please read it carefully and take it into account when considering the contents of this Certificate.

Any enquiries regarding this Certificate should be directed to the Product Appraisal Manager Phone: 03 8605 7601 email [email protected].

1.1. Issue of Certificate

This Certificate has been published and/or prepared by WSAA and nominated Project Manager and peer group of technical specialists (the Publishers).

The Certificate and the underlying product appraisal criteria have been prepared for use within Australia only by technical specialists that have expertise in the function of products such as those appraised in the Certificate (the Recipients).

By accepting this Certificate, the Recipient acknowledges and represents to the Publisher(s) and each person involved in the preparation of the Certificate and product appraisal criteria underlying it that the Recipient has understood and accepted the terms of this Disclaimer.

1.2. Limits on Reliance on Information and Recommendations

1.2.1. Disclaimer of liability

Neither the Publisher(s) nor any person involved in the preparation of the Certificate and product appraisal criteria underlying it accept(s) any liability for any loss or damage suffered by any person however caused (including negligence or the omission by any person to do anything) relating in any way to the Certificate or the product appraisal criteria underlying it. This includes (without limitation) any liability for any recommendation or information in the Certificate or any errors or omissions.

1.2.2. Intellectual Property and other rights

WSAA does not undertake any assessment of whether the importation, manufacture, sale or use of the Product the subject of this Certificate infringes the intellectual property rights or proprietary rights of any person. Recipients of the Certificate should undertake their own assessment of whether (as relevant) the importation, manufacture, sale or use of the relevant Products infringe the intellectual property rights or other proprietary rights of any person. If the Product infringes intellectual property rights or other proprietary rights there is potential for the supply of the Products to be interrupted.

From time to time WSAA and the other Publishers may receive notice of allegations that the importation, manufacture, sale or use of the Product infringes intellectual property rights or other proprietary rights. WSAA's policy is to not refer to such allegations in its Certificate or take any other steps to put Recipients on notice of such allegations. If, however, WSAA becomes aware that the allegations have been admitted or proved in Court, then WSAA may, at its discretion, take such steps as it considers appropriate. As such, Recipients acknowledge, agree and accept that WSAA may have information in its possession about intellectual property rights infringement allegations or other infringement allegations in relation to the Product which are not referred to or disclosed in this Certificate and which are not otherwise communicated to Recipients.

1.2.3. Need for independent assessment

The information and any recommendation contained (expressly or by implication) in this Certificate are provided in good faith (and subject to the limitations noted in this Certificate). However, you should treat the information as indicative only. You should not rely on that information or any such recommendation except to the extent that you reach an agreement to the contrary with the Publisher(s).

This Certificate does not contain all information that a person might require for the purposes of assessing any product discussed or appraised within it. The product appraisal criteria used in preparing this Certificate may not address all relevant aspects of the Product.

Recipients should seek independent evidence of any matter which is material to their decisions in connection with an assessment of the Product and consult their own advisers for any technical information required. Any decision to use the Product should take into account the reliability of that independent evidence obtained by the Recipient regarding the Product. Recipients should also independently verify and assess the appropriateness of any recommendation in the Certificate, especially given that any recommendation will not take into account a Recipient’s particular needs or circumstances.

WSAA has not evaluated the extent of the product liability and professional indemnify insurance that the provider of the product maintains. Recipients should ensure that they evaluate the allocation of liability for product defects and any professional advice obtained in relation to the product or its specification including the requirements for product liability and professional indemnity insurance.

1.3. No Updating

Neither the Publisher(s) nor any person involved in the preparation of this Certificate or the product appraisal criteria underlying it [has] [have] any obligation to notify you of any change in the information contained in this Certificate or of any new information concerning the Publisher(s) or the Product or any other matter.

1.4. No Warranty

The Publisher(s) do[es] not, in any way, warrant that steps have been taken to verify or audit the accuracy or completeness of the information in this Certificate, or the accuracy, completeness or reasonableness of any recommendation in this Certificate.

mailto:[email protected]


SCHEDULE A

APPENDIX A - PRODUCT CERTIFICATIONS

Copies of the following Quality and Product Certification Certificates are available for downloading from the WSAA ‘Members Only’ project portal website.

SCHEDULE A1 - REHAU – QUALITY MANAGEMENT SYSTEMS

Business Location: REHAU AG + Co, Rheniumhaus Otto-Hahn-Str. 2, D-95111 Rehau, GERMANY

There are 30 more locations of administration offices and plants included in this certification as detailed in the attachment.

Quality Systems Standard ISO 9001:2008

Certificate Registration no. 01 104 0101700

Certifying agency TÜV Rheinland Cert GmbH

First date of certification NA

Current date of certification 29 June 2015

Expiry date of certification 21 June 2021

SCHEDULE A2: M.O.L – QUALITY MANAGEMENT SYSTEMS

Business Location: M.O.L Gummiverarbeitung GmbH & Co. KG, GutenbergstraBe 12 – 14, 49377

Vechta, GERMANY


Certificate Registration no. 496810 QM15

Certifying agency DQS UL Management Systems Solutions

First date of certification 20 March 2017

Current date of certification 20 March 2017

Expiry date of certification 30 January 2020

NOTE: DQS UL Management Systems Solutions is accredited by DAkkS Deutsche Akkreditierungsstelle


SCHEDULE A

SCHEDULE A3: M.O.L – DECLARATION OF PERFORMANCE

According to Declaration (EU) No. 305/2011

Business Location: M.O.L Gummiverarbeitung GmbH & Co. KG, GutenbergstraBe 12 – 14, 49377

Vechta, GERMANY

Product Standard/Spec. EN 681-1:2002

Certificate Registration no. BL-001-2013

Certifying agency M.O.L Gummiverarbeitung GmbH & Co. KG


Current date of certification 12 July 2013

Expiry date of certification NA

SCHEDULE A4: BOREALIS GROUP – QUALITY MANAGEMENT SYSTEMS

A total 18 sites belongs to Borealis Group in Germany, Belgium, Hungary, Italy, Romania, Serbia, Sweden, Finland, Slovakia and Austria is included in this certification.


Certificate Registration no. A180432

Certifying agency International Certification Management GmbH


Current date of certification 28 May 2018

Expiry date of certification 27 May 2021

NOTE: DQS UL Management Systems Solutions is accredited by DAkkS (Deutsche Akkreditierungsstelle)

SCHEDULE A5: TOTAL PETROCHEMICAL – QUALITY MANAGEMENT SYSTEMS

A total 10 sites belongs to Total petrochemical Group in Belgium, USA, France, Spain and China. The certification of Feluy s.a in Belgium site is included in this table.

Quality Systems Standard EN ISO 9001:2015

Certificate Registration no. 92 QMS 068i

Certifying agency Vinçotte sa, Belgium

First date of certification 19 June 2006

Current date of certification 9 April 2018

Expiry date of certification 8 April 2021


SCHEDULE A

SCHEDULE A6: MFPA WEIMAR GERMANY – INSPECTION, LABORATORY AND CERTIFICATION BODIES

Testing facility: MFPA Official Testing Centre located in 99423 Weimar, Germany

Certification Standard

a) Inspection body - Type A to DIN EN ISO/IEC 17020:2012

b) Laboratory Accreditation – DIN EN ISO/IEC 17025:2005

c) Certification Body - DIN EN ISO/IEC 17065:2005

Certificate Registration no.

a) D-IS-11143-01-00

b) D-PL-11021-01-00

c) D-ZE-11143-01-00

Certifying agency DakkS (Deutsche Akkreditierungsstelle GmbH)

First date of certification

a) 8 May 2012

b) NA

c) 7 November 2014

Current date of certification

a) 19 December 2016

b) 19 December 2016

c) 7 November 2014

Expiry date of certification

a) 18 December 2021

b) 18 December 2021

c) 5 November 2019

SCHEDULE A2 - REHAU – QUALITY MANAGEMENT SYSTEMS

Business Location: REHAU Pty Ltd REHAU PTY LTD, Suite 1.02, Level 1, Quad 1, 8 Parkview Drive,

Sydney Olympic Park NSW 2127

Water Industry Standard WSA 137:2013

Certificate Registration no. AMI 74663

Certifying agency ApprovalMark

First date of certification 30/11/2017

Original Certified 30/11/2017

Expiry date of certification 30/11/2022

Current Certification 30/11/2017


SCHEDULE B

TABLE B1 AWASHAFT DN 400 PP MS PRODUCT SCHEDULE

Product Supplier Picture

AWASHAFT DN 400/315 PP

Chamber Base GD

REHAU

AWASHAFT DN 400/315 PP

Chamber Base RML

REHAU

REHAU’s AWADUCT DN 400/315

or DN 315/250 Offset Reducer

with lip sealing ring; Material

RAU-PVC 1100, Colour RAL 8023

red brown

REHAU

(optional item, not included in

this appraisal, but included in

PA 1508 Part 2)

REHAU’s AWADUCT KGB PVC-U

Bend SN8 with lip sealing rings

from 15° to 87°; Material RAU-

PVC 1100, Colour RAL 8023 red

brown (AWADUCT PVC SN8

Classic Range to EN 1401

(equivalent to AS/NZS 1260)

REHAU

(optional item, not included in this appraisal; alternative PVC-U bends locally available to AS/NZS 1260)

AWADUCT PP Ball joint –

continuously adjustable up to +/-

7.5o horizontally or vertically with

EPDM sealing rings (Safety-Lock)

REHAU

(optional item, not included in this appraisal, but included in PA 1508 Part 2)

Extension pipe or riser DN 300 or

DN 225 PVC-U DWV SN8 to

AS/NZS 1260

Installer


SCHEDULE B

Product Supplier Picture

DN 150 PVC-U push-in socket

plugs to AS/NZS 1260 for unused

branch of triple inlet RML base

unit

Installer

Injection moulded DN 300 or DN

225 PVC-U SWJ push on cap to

AS/NZS 1260

Installer

Injection moulded DN 300 or DN

225 PVC-U solvent weld on cap

with screw lid and RR seal to

AS/NZS 1260

Installer

PE Shroud Pipe (450mm dia

minimum) to AS/NZS 4130,

Concrete Surround and Surface

Fittings (DI access cover to AS

3996 Class B or D)

Installer

The DN 400 GD chamber base measures 530 mm in length and 360 mm in height (reducer not included in this

appraisal, but in PA 1508 Part 2) and the DN 400 RML measures 480 mm in length and 360 mm in height (reducer

not included in this appraisal, but in PA 1508 Part 2.).

FIGURE B1 AWASHAFT DN 400 PP MS BASE UNIT

TABLE B2 AWASHAFT DN 400 PP MS BASE

Chamber base unit DN Inlet / outlet

DN/OD M (mm) Z (mm) N (mm)

Length (mm)

Height H2 (mm)

AWASHAFT DN/OD 400 GD chamber base

(straight connecting passage)

400 160 74 383 189 530 360

AWASHAFT DN/OD 400 RML (3 inlets, 1 outlet)

400 160 74 329 189 480 360


SCHEDULE B

TABLE B3: AWASHAFT DN 600 PP MC PRODUCT SCHEDULE

Product Picture Supplier

AWASHAFT DN 600 PP

Chamber Base as per the

manufacturer schedule

(refer to following pages)

REHAU

Elastomeric seals for

components

a) DN600 lip sealing for

top of the base unit

b) DN160, 200, 250, 315

and 400 lip sealing ring

for inlet / outlet

c) DN600 lip sealing ring

for riser rings

MOL

AWASHAFT DN 600 PP

riser

REHAU

AWADUCT PP Pipes and

Fittings

REHAU

(optional item, not included in this appraisal, but in PA 1508 Part 2)

AWADOCK PP Fittings

REHAU



SCHEDULE B


Telescopic part

REHAU

(optional item. Allows height adjustment by 300mm, suitable for load class B application)

Concrete Load bearing ring

REHAU

DI access cover to AS 3996

Class B or D

Installer

FIGURE B2 AWASHAFT DN 600 PP MC BASE UNIT


SCHEDULE B

TABLE B4 AWASHAFT DN 600 PP MC BASE

Chamber base unit

Bend DN/OD

Inlet / outlet

mm

Effective height N

mm

Height H

mm

h¹

mm

h2

mm

AWASHAFT PP DN/OD 600 chamber bases ,

straight ( Refer to Figure B2)

straight

160 250 536 206

200 290 536 206

250 330 600 206

315 385 664 210

400 430 710 201

FIGURE B3 AWASHAFT PP DN 600 PP MC BASE - RML90º, T-PIECE 90º,AG90º

TABLE B5 AWASHAFT PP DN 600 PP MC BASE - RML90º,T-Piece 90º,AG90º

Chamber base unit

Bend DN/OD Inlet / outlet

mm

Effective height N

mm

Height H

mm

h¹

mm

h2

mm

RML90º

160 250 560 206

200 290 560 206

250 330 710 206

315 385 710 206

RM 270º

160 250 560 206

200 290 560 206

250 330 710 206

315 385 710 206

ML90º

160 250 560 206

200 290 560 206


SCHEDULE B

Chamber base unit


mm

Effective height N

mm

Height H

mm

h¹

mm

h2

mm

250 330 710 206

315 385 710 206

RML90º/270º

160 250 560 206

200 290 560 206

250 330 710 206

315 385 710 206

AG90º

160 250 560 206

200 290 560 206

250 330 710 206

315 385 710 206

AG270º

160 250 560 206

200 290 560 206

250 330 710 206

315 385 710 206

FIGURE B4 AWASHAFT PP DN 600 PP MC BASE -30º, 45º, 60º Deflection


SCHEDULE B

TABLE B6 AWASHAFT PP DN 600 PP MC BASE –30º,60º 90º deflection

Chamber base unit

Angle deflection

DN/OD Inlet / outlet

mm

Effective height N

mm

Height H

mm

h¹

mm

h2

mm

Standard

30º 160 260 556 210 8

200 278 556 210 8

45º 160 260 556 210 8

200 278 556 210 8

60º 160 260 556 210 8

200 278 556 210 8

FIGURE B5 AWASHAFT PP DN 600 PP RISER PIPE

TABLE B7 AWASHAFT PP DN 600 PP RISER PIPE

Riser Pipe Installation Da

mm

Di

mm

With/ with out Inliner

700 680 600

1000 680 600

1200 680 600

1500 680 600

2000 680 600

3000 680 600

6000 680 600


SCHEDULE B

FIGURE B6 AWASHAFT PP DN 600 PP Telescopic part

TABLE B8 AWASHAFT PP DN 600 PP Telescopic part

Telescopic part Pipe

N1

mm

N2

mm

H

mm

Di

mm

D2

mm

300 140 490 590 770

300 140 490 590 850

FIGURE B7 AWASHAFT PP DN 600 Concrete Load Bearing Ring

TABLE B9 AWASHAFT PP DN 600 Concrete Load Bearing Ring

DN

mm

Weight

kg

625 155


SCHEDULE B

TABLE B10: AWASHAFT DN 800 PP MC PRODUCT SCHEDULE


AWASHAFT DN 800 PP

Chamber Base as per the

manufacturer schedule (refer

to following pages)

REHAU

AWASHAFT DN 800 PP

riser (with and without

ladder)

REHAU

DN 800/625 PP cone

REHAU

Elastomeric seals for

components

a) DN800 lip sealing for

top of the base unit

b) DN160, 200, 250, 315

and 400 lip sealing ring

for inlet/outlet

c) DN800 lip sealing ring

for riser rings

d) DN625 lip sealing ring

for top of the cone

MOL

AWADUCT PP Fittings

REHAU



SCHEDULE B


AWADUCT PP Fittings

REHAU


AWADOCK PP Fittings

REHAU


Push on caps according to

water agency requirements

Installer

(not included in this appraisal)

Ladder

This item is not included in the appraisal as DN800 is being assessed as MC and there is no man entry.

Rehau supplies the ladders.

The supports of Ladders are

injection moulded into the

risers. The steps are

assembled

REHAU

(not included in this appraisal)

1000/800 polymer bearing

ring DN625 to EN 13598-2

Material – Polymer, Grey

colour

REHAU


SCHEDULE B


FIGURE B8 AWASHAFT PP DN 800 MC STANDARD BASES

TABLE B11 AWASHAFT PP DN 800 MC STANDARD BASES

Chamber base unit


mm

Effective height N

mm

Height H

mm

Weight

kg

180ºGD

160 455 535 23

200 495 535 24

250 535 665 27

315 590 600 32

RML90º

125 425 535 22

160 455 535 23

200 495 535 24

250 535 600 27

315 590 665 32

RM 270º 160 455 535 23


SCHEDULE B

Chamber base unit


mm

Effective height N

mm

Height H

mm

Weight

kg

200 495 535 24

250 535 600 27

315 590 665 32

ML90º

160 455 535 23

200 495 535 24

250 535 600 27

315 590 665 32

RML90º/270º

160 455 535 23

200 495 535 24

250 535 600 27

315 590 665 32

AG90º

160 455 535 23

200 495 535 24

250 535 600 27

315 590 665 32

AG270º

160 455 535 23

200 495 535 24

250 535 600 27

315 590 665 32

FIGURE B9 AWASHAFT PP DN 800 PROJECT SPECIFIC BASES – STRAIGHT


SCHEDULE B

TABLE B12 AWASHAFT PP DN 800 PROJECT SPECIFIC BASES - STRAIGHT

Chamber base unit DN/OD Inlet / outlet

mm

Effective height N

mm

Height H

mm weight

STRAIGHT

110 310 470 30

125 310 470 32

160 310 470 33

200 310 470 34

250 435 595 40

315 435 595 42

400 435 595 46

FIGURE B10 AWASHAFT PP DN 800 PROJECT SPECIFIC BASES - ANGLED

TABLE B13 AWASHAFT PP DN 800 PROJECT SPECIFIC BASES - ANGLED

Chamber base unit

DN/OD Inlet / outlet

mm

Effective height N

mm

Height H

mm weight

ANGLED

110 310 470 30

125 310 470 32

160 310 470 33

200 310 470 34

250 435 595 40

315 (Max 45º) 435 595 42

400 (Max 30º) 435 595 46


SCHEDULE B

FIGURE B11 AWASHAFT PP DN 800 CONE

TABLE B14 AWASHAFT PP DN 800 CONE

CONE Version N max

mm

H Min

mm

Height H weight

DN800 With/with out ladder 615 365 710 29

FIGURE B12 AWASHAFT PP DN 800 RINGS

TABLE B15 AWASHAFT PP DN 800 RINGS

RINGS Version Effective Length N

mm

Height H

mm weight

DN800

Inc Vertical latter/ Ex.Ladder 125 220 7




Inc Vertical latter/Ex.Ladder 625 720 24

Inc Vertical latter/Ex.Ladder 750 845 29



SCHEDULE B

TABLE B16: AWASHAFT DN 1000 PP MH PRODUCT


AWASHAFT DN 1000 PP Chamber

Base as per the manufacturer

schedule (refer to following pages)

REHAU

Elastomeric seals for components

a) DN1000 lip sealing for top of the

base unit

b) DN160, 200, 250, 315 and 400 lip

sealing ring for inlet/outlet

c) DN1000 lip sealing ring for riser

rings

d) DN625 lip sealing ring for top of

the cone

MOL

DN 1000/625 PP cone

REHAU

DN 1000/800 PP cone/adaptor

REHAU


SCHEDULE B


AWASHAFT DN 1000 PP riser (with

ladder)

REHAU

AWADUCT PP Fittings

REHAU

(optional items, not included in this appraisal, but in PA 1508 Part 2)

AWADOCK PP Fittings

REHAU

(optional items, not included in this appraisal, but in PA 1508 Part 2)

Ladder

This item is included in the appraisal as DN1000 MH is being assessed as man entry.

REHAU

(Rehau supplies the ladders. The supports of Ladders are injection moulded into the risers. The steps are assembled)


SCHEDULE B


Polymer load bearing ring DN 625

REHAU

Concrete Load bearing ring DN 800

REHAU

Concrete load bearing ring DN 625

REHAU

The DN 1000 MH base measures 1316mm in length and 604mm in height

FIGURE B13 AWASHAFT PP DN 1000 STANDARD CHAMBER BASE


SCHEDULE B

TABLE B17 AWASHAFT PP DN 1000 MH STANDARD BASES

Chamber base unit

Bend OD inlet/outlet

mm

Effective height N

mm

Height H

mm

Weight

kg

180ºGD

160 435 605 62

200 435 605 72

250 435 605 74

315 435 605 72

400 480 605 83

15° ( 165° or 195°)

200 435 605 70

315 435 605 75

30° (150° or 195°)

200 435 605 69

315 435 605 75

45°(135° or 225°)

200 435 605 70

60°(120° or 240°)

200 435 605 70

90° or 270°

200 435 605 80

250 435 605 80

315 435 605 80

RML90º

200 435 605 79

250 435 605 80

315 435 605 81

RM 270º 200 435 605 89

250 435 605 89


SCHEDULE B

Chamber base unit

Bend OD inlet/outlet

mm

Effective height N

mm

Height H

mm

Weight

kg

315

435 605

89

ML90º

200 435 605 88

250 435 605 89

315 435 605 90

200 495 535 24

250 535 600 27

315 590 665 32

RML45º

200 435 605 82

RM 225º

200 435 605 85

ML135º

200 435 605 85

RL135º/225º

200 435 605 85

FIGURE B14 AWASHAFT PP DN 1000 PROJECT SPECIFIC BASES STRAIGHT


SCHEDULE B

TABLE B18 AWASHAFT PP DN 1000 PROJECT SPECIFIC BASES – STRAIGHT

(Usable height 435 mm for chamber height ≤ 1496mm)

Chamber base unit OD Inlet / outlet

mm

Usable height H

mm

Height H

mm Weight kg

STRAIGHT

160 435 605 64

200 435 605 66

250 435 605 71

315 435 605 79

TABLE B19 AWASHAFT PP DN 1000 PROJECT SPECIFIC BASES – STRAIGHT

(Usable height 935 mm for chamber height ≥ 1496mm)

Chamber base unit OD Inlet / outlet

mm

Usable height H

mm

Height H

mm Weight kg

STRAIGHT

160 935 1105 64

200 935 1105 66

250 935 1105 71

315 935 1105 79

400 935 1105 124

500 935 1105 145

630 935 1105 179

FIGURE B15 AWASHAFT PP DN 1000 PROJECT SPECIFIC BASES - ANGLED


SCHEDULE B

TABLE B20 AWASHAFT PP DN 1000 PROJECT SPECIFIC BASES – ANGLED

(Usable height 435 mm for chamber height ≤ 1496mm)

Chamber base unit

DN Inlet / outlet

mm

Usable height H

mm

Height H

mm Weight kg

ANGLED

160 435 605 64

200 435 605 66

250 435 605 70

315 435 605 78

TABLE B21 AWASHAFT PP DN 1000 PROJECT SPECIFIC BASES - ANGLED

(Usable height 935 mm for chamber height ≥ 1496mm)

Chamber base unit

DN Inlet / outlet

mm

Usable height H

mm

Height H

mm Weight kg

ANGLED

160 435 605 64

200 435 605 66

250 435 605 70

315 435 605 78

FIGURE B14 AWASHAFT PP DN 1000 EMPTY BASE

TABLE B22 AWASHAFT PP DN 1000 EMPTY BASE

Chamber base unit

Usable height H

mm

Height H

mm Weight kg

EMPTY BASE

475 605 59

975 1105 89


SCHEDULE B

FIGURE B15 AWASHAFT PP DN 1000 RISER RINGS

TABLE B23AWASHAFT PP DN 1000 RINGS

RINGS Version Useable Length N

mm

Height H

mm weight

DN 1000

Inc Vertical latter 125 220 20





Excl ladder 125 220 12






SCHEDULE B

FIGURE B16 AWASHAFT PP DN 1000/625 CONE

TABLE B24 AWASHAFT PP DN 1000/625 CONE

CONE Description N max

mm

N Min

mm

Height H Weight

kg

DN1000/625 With vertical ladders 820 570 915 45

DN1000/625 Without vertical ladders 820 570 915 43

FIGURE B17 AWASHAFT PP DN 1000/800 CONE

TABLE B25 AWASHAFT PP DN 1000/800 CONE

CONE Useable length

mm

Height H Weight

kg

DN1000/625 500 595 28


SCHEDULE B

FIGURE B18 AWASHAFT DN 1000/800 POLYMER BEARING RING DN 625

TABLE B26 AWASHAFT DN 1000/800 POLYMER BEARING RING DN 625

RINGS Description DN

mm

Weight

kg

DN 1000/800

Polymer bearing ring 625 45

Seal cone bearing ring (rubber). sand-tight

635 .5

Polymer mortar for polymer bearing ring ( for 2 bearing rings)

25

FIGURE B19 AWASHAFT DN 1000/800– CONCRETE BEARING RING

TABLE B27 AWASHAFT DN 1000/800– CONCRETE BEARING RING

DN

mm

Weight

kg

625 155

FIGURE B20 AWASHAFT DN 1000/800 – CONCRETE SUPPORT RING DN 800

TABLE B28 AWASHAFT DN 1000/800 – CONCRETE SUPPORT RING DN 800


SCHEDULE B

DN

mm

Weight

(Kg)

800 300

FIGURE B21 AWASHAFT DN 1000/800/600 – CONCRETE BEARING RING VIATOP

TABLE B29 AWASHAFT DN 1000/800/600 – CONCRETE BEARING RING VIATOP

DN

mm

Weight

kg

625 -

FIGURE B24 AWADOCK CONNECTION - CONNECTION OF SEWER PIPES MADE OF PVC AND PP

TABLE B30 AWADOCK CONNECTION - CONNECTION OF SEWER PIPES MADE OF PVC AND PP

Length of spigot end

(mm)

DN/ID

mm

DN/OD

mm

Bore diameter

mm

60 150 160 200

50 175 200 250

wsaa product appraisal certificate · any enquiries regarding this certificate should be directed...

Documents