www.convergencetechnologycenter.org due 402356 introduction to asterisk with vincente d’ingianni...

25
www.convergencetechnologycenter. DUE 402356 Introduction to Asterisk with Vincente D’Ingianni Director of Professional Services Binary Systems, Inc. [email protected]

Upload: emory-cameron

Post on 16-Dec-2015

218 views

Category:

Documents


1 download

TRANSCRIPT

www.convergencetechnologycenter.org DUE 402356

Introduction to Asterisk with

Vincente D’IngianniDirector of Professional ServicesBinary Systems, [email protected]

2 www.convergencetechnologycenter.org

What is TrixBox? TrixBox is an Asterisk distribution pre-packaged with the

following additions: CentOS - a free distribution of RedHat Linux FreePBX – a web-based configuration tool And many other bells and whistles.

TrixBox allows easy user access to Voice Mail, Conferencing, etc.

TrixBox removes many of the complications of configuring Asterisk.

3 www.convergencetechnologycenter.org

TrixBox Installation

See Installation Video

4 www.convergencetechnologycenter.org

TrixBox Admin Login

Default UserID: maint Default Password: password

5 www.convergencetechnologycenter.org

TrixBox Admin Mode

Allows configuration of your Asterisk system through FreePBX or configuration files.

6 www.convergencetechnologycenter.org

FreePBX Module Admin Feature modules must be installed prior to configuration. Install the following modules:

Feature Code Admin VoiceMail IVR Ring Groups Time Conditions Music on Hold Info Services Backup & Restore

Click “Process” when done.

7 www.convergencetechnologycenter.org

Module Admin Confirmation

Click “Confirm” to install.

8 www.convergencetechnologycenter.org

Apply Configuration Changes

All changes must be applied before they become active.

Look for the Red bar at the top of the FreePBX window to signal when changes must be applied.

Simply click the bar to apply the changes.

9 www.convergencetechnologycenter.org

FreePBX Configuration

Return to FreePBX Setup to see your new modules.

10 www.convergencetechnologycenter.org

Configure SIP Extensions

Add phone extensions to your PBX.

11 www.convergencetechnologycenter.org

Add Extension Name & Number

User Extension is the extension number.

Display Name is the Caller ID Name.

Secret is the SIP registration password.

Leave other fields alone.

12 www.convergencetechnologycenter.org

Fax, Privacy, Recording, and VoiceMail

Other features for the extension can be configured here.

Click “Submit” when finished.

Add other extensions as necessary.

Don’t forget to click the “Apply Changes” bar.

13 www.convergencetechnologycenter.org

Configure X-Lite Soft Phone Download and install the X-Lite Soft Phone from

www.counterpath.com Configure your Soft Phone to match the exensions in

FreePBX. Point the Soft Phone to the IP address of the Asterisk system. Configure multiple Soft Phones on other computers for each

extension.

14 www.convergencetechnologycenter.org

Configure X-Lite Soft Phone Download and install the X-Lite Soft Phone from

www.counterpath.com Configure your Soft Phone to match the exensions in

FreePBX. Point the Soft Phone to the IP address of the Asterisk system. Configure multiple Soft Phones on other computers for each

extension.

15 www.convergencetechnologycenter.org

X-LiteSoft Phone

Making Calls Between Extensions

X-LiteSoft Phone

IP Network

Extension 101 dials 102 to make a call on the PBX.

16 www.convergencetechnologycenter.org

Simple IAX2 Trunking

Create a “Virtual Trunk” between two Asterisk PBXs.

17 www.convergencetechnologycenter.org

Simple IAX2 Trunking

Leave the top fields blank

18 www.convergencetechnologycenter.org

Simple IAX2 Trunking

Put the Peer PBX IP address on the PEER Details Configure both PEER and USER type=friend

There is no registration or password required between PBXs, so do not implement this on a real system unless you are sure of what you are doing.

19 www.convergencetechnologycenter.org

Create an Outbound Route

Set the Dial Pattern to match any dialed number string beginning with a “9”

Put your IAX2 trunk in the Trunk Sequence list.

Note: A dial pattern of “9|.” will strip off the 9 and pass the rest of the digits to the trunk.

20 www.convergencetechnologycenter.org

Create an Inbound Route

Allow inbound calls from any trunk to be routed to a specific destination.

By not specifying a DID Number or Caller ID Number, any inbound call will match.

21 www.convergencetechnologycenter.org

Set the Inbound Route Destination

Direct the inbound route to a specific extension, ring group, IVR, etc.

22 www.convergencetechnologycenter.org

General Settings

Adjust the Voice Mail, Faxes, Security, etc.

Allow anonymous inbound SIP Calls makes testing easy, but can be a security risk.

23 www.convergencetechnologycenter.org

X-LiteSoft Phone

Making Calls Between PBXs

X-LiteSoft Phone

IP Network

Extension 101 dials 9102 to make a call across the IAX trunk between the two PBXs.

24 www.convergencetechnologycenter.org

Flash Operator Panel

Monitor call activity in real time on the Flash Operator Panel.

25 www.convergencetechnologycenter.org

Congratulations

You have now created a fully functional VoIP PBX system ideal for teaching communication fundamentals.

Expand the system with real VoIP Gateways or SIP termination to the PSTN for real applications.

Experiment with IVRs, Ring Groups, Time-of-Day routing, etc.

Best of all, it is free!