zanussi zwgh7105

7/27/2019 Zanussi Zwgh7105

1/24

EN User manual 2

Washing machine

ZWGH 7105


2/24

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Product description _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 4Programme selector dial, spin speed button and availableoptions _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 5

First use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7Personalisation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7Daily Use _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 7Helpful hints and tips _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 9

Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ _ 11What to do if ... _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 13Technical data _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 16Consumption values _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 17Care and cleaning _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 17

Installation _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 19Electrical connection _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 21Environment concerns _ _ _ _ _ _ _ _ _ _ _ _ _ _ 21

Subject to change without notice

Safety informationImportant Read carefully & keep for future reference. The safety of Your appliance complies with the industry

standards and with legal requirements on the safety ofappliances. However, as manufacturers, we feel it isour duty to provide the following safety notes.

It is most important that this instruction book shouldbe retained with the appliance for future reference.Should the appliance be sold or transferred to anotherowner, or should you move house and leave the ap-pliance, always ensure that the book is supplied with

the appliance in order that the new owner can get toknow the functioning of the appliance and the relevantwarnings.

You MUST read them carefully before installing or us-ing the appliance.

Before first starting up, check the appliance for anydamage incurred during transport. Never connect up adamaged appliance . If parts are damaged, contact yoursupplier.

If the appliance is delivered in the winter months whenthere are minus temperatures. Store it at room tem-perature for 24 hours before using for the first time.

General safety It is dangerous to alter the specifications or attempt to

modify this product in any way.

During high temperature wash programmes the doorglass may get hot. Do not touch it!

Make sure that small pets do not climb into the drum.

To avoid this, please check into the drum before using.

Any objects such as coins, safety pins, nails, screws,stones or any other hard, sharp material can cause

extensive damage and must not be placed into the ma-

chine. Only use the advised quantities of fabric softener and

detergent. Damage to the fabric can ensue if you over-fill. Refer to the manufacturers recommendations ofquantities.

Wash small items such as socks, laces, washable beltsetc in a washing bag or pillow case as it is possible forsuch items to slip down between the tub and the innerdrum.

Do not use your washing machine to wash articles withwhalebones, material without hems or torn material.

Always unplug the appliance and turn off the watersupply after use, cleaning and maintenance.

Under no circumstances should you attempt to repairthe machine yourself. Repairs carried out by inexper-ienced people may cause injury or serious malfunc-tioning. Contact your local Service Centre. Always in-sist on genuine spare parts.

Installation This appliance is heavy. Care should be taken when

moving it.

When unpacking the appliance, check that it is notdamaged. If in doubt, do not use it and contact theService Centre.

All packing and transit bolts must be removed beforeuse. Serious damage can occur to the product and toproperty if this is not adhered to. See relevant section

in the user manual.

2


3/24

After having installed the appliance, check that it is notstanding on the inlet and drain hose and the worktopis not pressing the electrical supply cable against thewall.

If the machine is situated on a carpeted floor, pleaseadjust the feet in order to allow air to circulate freely

under the appliance. Always be sure, that there is no water leakage from

hoses and their connections after the installation.

If the appliance is installed in a location subject to frost,please read the dangers of freezing chapter.

Any plumbing work required to install this applianceshould be carried out by a qualified plumber or com-petent person.

Any electrical work required to install this appliance

should be carried out by a qualified electrician or com-petent person.

Use This appliance is designed for domestic use. It must

not be used for purposes other than those for which itwas designed.

Only wash fabrics which are designed to be machinewashed. Follow the instructions on each garment label.

Do not overload the appliance. See the Washing Pro-

gramme Table. Before washing, ensure that all pockets are empty and

buttons and zips are fastened. Avoid washing frayed ortorn articles and treat stains such as paint, ink, rust,and grass before washing. Underwired bras must NOTbe machine washed.

Garments which have been in contact with volatile pe-troleum products should not be machine washed. Ifvolatile cleaning fluids are used, care should be taken

to ensure that the fluid is removed from the garmentbefore placing in the machine.

Never pull the power supply cable to remove the plugfrom the socket; always take hold of the plug itself.

Never use the appliance if the power supply cable, thecontrol panel, the working surface or the base are

damaged so that the inside of the washing machine isaccessible.

Make sure that the hot water temperature of your do-mestic system does not exceed 60C to avoid damagesto the laundry and the appliance.

Child safety This appliance is not intended for use by person (in-

cluding children) with reduced physical sensory ormental capabilities or lack of experience and knowl-edge unless they have been given supervision or in-struction concerning use of the appliance by a personresponsible for their safety.

The packaging components (e.g. plastic film, poly-styrene) can be dangerous to children - danger of suf-focation! Keep them out of childrens reach

Keep all detergents in a safe place out of childrensreach.

Make sure that children or pets do not climb into thedrum. To prevent children and pets becoming trappedinside the drum this machine incorporates a specialfeature.

To activatethis device, ro-tate the button (withoutpressing it) inside thedoor clockwise until the

groove is horizontal. Ifnecessary use a coin.

To disablethis device andrestore the possibility ofclosing the door, rotate thebutton anti-clockwise un-

til the groove is vertical.

Product descriptionThis appliance is provided with two inlet hoses: one for the cold water and one for the hot water supplied whether

by alternative heating sources (solar panel, waste thermal treatment,) or by traditional sources (gas-firedboiler, Diesel oil boiler,). The hot water loading permits a minor use of the electric resistance allowing a substantialenergy saving.

3


4/24

1 Detergent dispenser drawer

2 Control panel

3 Door opening handle

4 Rating plate

5 Drain pump

6 Adjustable feet

1 2

3

4

5

6

Detergent dispenser drawerCompartment for detergent used for prewash and

soak phase or for stain remover used during the stainaction phase (if available). The prewash and soak deter-gent is added at the beginning of the wash programme.The stain remover is added during the stain action phase.

Compartment for powder or liquid detergent used formain wash. If using liquid detergent pour it just beforestarting the programme.

Compartment for liquid additives (fabric softener,starch).Follow the product manufacturers recommendations onquantities to use and do not exceed the MAXmark inthe detergent dispenser drawer. Any fabric softener orstarching additives must be poured into the compartmentbefore starting the wash programme.

Control panelBelow is a picture of the control panel. It shows the programme selector dial as well as the buttons, pilot lightsand the display. These are presented by relevant numbers on the following pages.

4


5/24

1 2 3 4 5 6 7 8

10

9

1 Programme selector dial2 SPIN button3 OPTION button4 PREWASH button5 EASY IRON button

6 HOT W ATER CONNECTION button7 START/PAUSE button8 DELAY STAR T button9 DOO R LOCK ED pilot light

10 DisplayTable of symbols

Cotton

Synthetics

Wool

Rinse Hold

Child Lock

Hot Water Connection

Programme selector dial, spin speed button and available optionsProgramm e Selector DialIt allows you to switch the appliance on/off and/or to selecta programme.

SpinBy pressing this button you can change the spin speed ofthe selected programme.

Rinse holdBy selecting this function the water of the last rinse is notemptied out to prevent the fabrics from creasing. Beforeopening the door it will be necessary to empty out thewater. To empty out the water, please read the paragraph

At the end of the programme.

Daily - Super Quick o ptionsBy pressing this buttons it is possible to modify thewashing time, automatically proposed by the machine in

order to obtain good performances in a short time. Daily: to be used for normally soiled cotton, synthetic

or delicate items.

Super Quick: a very short cycle for slightly soiled itemsthat have been worn for a short time.

PrewashBy selecting this option the machine performs a prewashcycle before the main wash phase. The washing time willbe prolonged. This option is recommended for heavily

soiled laundry.

5


6/24

Easy IronBy selecting this option the laundry is gently washed andspun to avoid any creasing. In this way ironing is easier.Furthermore the machine will perform some additionalrinses in some programmes. On other programmes (e.g.cotton) the maximum spin speed is reduced automati-

cally.Hot Water ConnectionThis appliance is provided with two inlet hoses: one forthe cold water and one for the hot water. The programmesof the selector dial indicated by the symbol automaticallyload hot water as well as cold water. If you select one ofthese programmes, the pilot light of button 6goes on toindicate that the appliance is using the available hot waterof your domestic system.

By pressing this button the hot water connection is inter-rupted, the pilot light of the button goes off and the ap-pliance loads only cold water that is heated by the electricresistance provided in the appliance .

ImportantWe recommend that you perform washing cycle loadingonly cold water in case of proteinic or alimentary soileditems (blood, eggs) that need a primary soak phase withcold water. Afterwards, the water is heated gradually to

get a more efficient cleaning action and an enzymatic re-action allowing the best washing results.

Start/PauseThis button allows you to start or to interrupt the selectedprogramme.

Delay StartThe programme can be delayed from 30 min - 60 min -90 min, 2 hours and then by 1 hour up to a maximum of

20 hours by means of this button.9 Door locked pilot lightThe pilot light 9illuminates when the programme startsand indicates if the door can be opened:

light on: the door cannot be opened. The machine inworking or has stopped with water left in the tub.

light off: the door can be opened. The programme isfinished or the water has been emptied out.

light flashing: the door is opening

10 Display

10.1 10.2

The display shows the following information:10.1: Child safety lockThis device permits you to leave the appliance unattendedduring it's functioning.10.2: Duration of the selected programme

After selecting a programme, the duration is displayedin hours and minutes (for example ). The du-ration is calculated automatically on the basis of themaximum recommended load for each type of fabric.After the programme has started, the time remaining isupdated every minute.

Selected drying timeAfter selecting a drying programme the drying time isshown in minutes or hours and minutes. After the pro-

gramme has started, the time remaining is updatedevery minute.

Delayed startThe Selected delay set by pressing the relevant buttonappears on the display for a few seconds, then the du-ration of the selected programme is displayed again.The delay time value decreases by one unit every hourand then, when 1 hour remains, every minute.

Alarm codesIn the event of operating problems, some alarm codes

can be displayed, for example (see paragraphWhat to do if...).

Incorrect option selectionIf an option which is not compatible with the set washprogramme is selected, the message Er ris displayedat the bottom of the display for a few seconds and theintegrated red light of button 7start flashing.

End of programmeWhen the programme has finished three flashing zeros

are displayed, the pilot light 9and the pilot light ofbutton 7go out and the door can be opened.

6


7/24

First use Ensure that the electrical and water connections

comply with the installation instructions.

Remove the polystyrene block and any material fromthe drum.

Pour 2 liters of water into the main wash compartment

of the detergent drawer in order to activate the

EC O valve. Then run a cotton cycle at the highest tem-perature without any laundry in the machine, to removeany manufacturing residue from the drum and tub.Pour 1/2 a measure of detergent into the main wash

compartment and start the machine.

PersonalisationAcoustic signalsThe machine is provided with an acoustic device, whichsounds in the following cases:

at the end of the cycle

if there is a fault.By pressing the 4and 5buttons simultaneously for about6 seconds, the acoustic signal is deactivated (except ifthere is a fault). By pressing these 2 buttons again, theacoustic signal is reactivated.

Child safety lockThis device permits you to leave the appliance unattendedand not to worry that children might be injured by or cause

damage to the appliance. This function remains enabledalso when the washing machine is not working.There are two different ways to set this option:

1. Before pressing button7: it will be impossible to startthe machine.

2. After pressing button 7: it will be impossible tochange any other programme or option.

To enable or disable this option press simultaneously forabout 6 seconds buttons 2and 3until on the display, theicon appears or disappears.

Daily UseLoad the laundry

Open the door by carefullypulling the door handleoutwards. Place the laun-dry in the drum, one itemat a time, shaking them outas much as possible.Close the door.

Measure o ut the detergent and the fabric softener

Pull out the dispenser drawer until it stops. Measureout the amount of detergent required, pour it into the

main wash compartment or in the appropriate com-partment if the selected programme/option it requires(see more details in "Detergent dispenser drawer").If required, pour fabric softener into the compartment

marked (the amount used must not exceed the

MAX mark in the drawer). Close the drawer gently.

7


8/24

Select the required programm e by m eans of theprogramm e selector dial (1)Turn the programme selector dial to the required pro-gramme.The green pilot light of button 7starts to flash. The selectordial can be turned either clockwise or anticlockwise.

Turn the selector dial to position to reset the pro-gramme/to switch the machine OFF.At the end of the programm e the selector dial must beturned to position , to switch the mach ine off.Important If you turn the programme selector dial toanother programme when the machine is working, the redpilot light of button 7will blink 3 times and the messageEr ris displayed to indicate a wrong selection. Themachine will not perform the new selected programme.

Select the spin speed or Rinse H old by pressingbutton 2When selecting a programme, the appliance proposesautomatically the maximum spin speed provided for thatprogramme. (See "Washing programmes" for the maxi-mum allowed spin speed).Press this button repeatedly to change the spin speed, ifyou want your laundry to be spun at a different speed. Therelevant pilot light illuminates.

Select the available options by m eans of buttons 3,4 and 5Depending on the programme, different options can becombined. These must be selected after choosing the de-sired programme and before starting the programme.When these buttons are pressed, the corresponding pilotlights illuminate. When they are pressed again, the pilotlights go out. If an incorrect option is selected, the inte-grated redpilot light of the button 7flashes 3 times andthe message Er ris displayed.For the compatibility among the washing programmesand the options see chapter W ashing programmes .Interrupt, if needed, the hot water conn ection b ypressing the button 6Press this button to interrupt the hot water loading, if youhave selected one of the programmes indicated by thecorresponding symbol. The machine will only load thencold water, which will be warmed up by the heating ele-

ment of the appliance. The corresponding pilot light illu-minates.

For the compatibility among the washing pro-

grammes and the options see chapter Washing Pro-grammes.

Start the programme by pressing button 7To start the selected programme, press this button; thecorresponding green pilot light stops blinking.The pilot light 9illuminates to indicate that the appliancestarts operating and the door is locked.If you have chosen a delayed start, the machine will beginthe countdown.

Important If an incorrect option is selected, the message is displayed for a few seconds and the redpilot lightof this button blinks 3 times.

Select the Delay Start by pressing button 8Before you start the programme, if you wish to delay the

start, press this button to select the desired delay.The selected delay time value will appear on the displayfor few seconds, then the duration of the programme willappear again.You must select this option after you have set the pro-gramme and before you start the programme.You can cancel or modify the delay time at any moment,before you press button 7.Selecting the delay start :

1. Select the programme and the required options.2. Select the delay start by pressing button 8.3. Press button 7:

- the machine starts its hourly countdown.- the programme will start after the selected delay hasexpired.

Cancelling the Delay Start after having started the pro-gramme:

1. Set the washing machine to PAUSE by pressing but-ton 7.

2. Press button 8once. On the display will appear 0'.3. Press button 7again to start the programme.Important The selected delay can be changed only after selecting

the washing programme again.

The door will be locked throughout the delay time. Ifyou need to open the door, you must first set the wash-ing machine to PAUSE by pressing button 7and waitfew minutes before opening the door. After you haveclosed the door, press the same button again.

8


9/24

Important The Delay Start cannotbe selected withDRAINprogramme.Altering an option or a running p rogramm eIt is possible to change some options before the pro-gramme carries them out.Before you make any change, you must pause the washingmachine by pressing button 7.Changing a running programme is possible only by re-

setting it. Turn the programme selector dial to andthen to the new programme position. Start the new pro-gramme by pressing button 7again.The washing water in the tub will be not emptied out.

Interrupting a programm ePress the button 7to interrupt a programme which isrunning, the corresponding pilot light starts blinking.Press the button again to restartthe programme.Cancelling a programm eTurn the selector dial to to cancel a programme whichis running. Now you can select a new programme.

Opening the door after the programm e has startedFirst set the machine to pause by pressing the button 7.If the pilot light 9blinks and after a few minutes goes off,the door can be opened.

If the pilot light 9remains lit, this means that the machineis already heating or that the water level is too high. Inany case, do not try to force the door!If you cannot open the door but you need to open it, youhave to switch the machine off by turning the selector dial

to . After a few minutes the door can be opened(Pay attention to the water level and tem perature ).

After closing the door, it is necessary to select the pro-gramme and options again and to press button 7.At the end of the programmeThe machine stops automatically. Three blinking

appear on the display, the pilot light of button 7and the pilot light 9go off.If a programme or an option that ends with water left inthe tub has been selected, the pilot light 9remains on andthe door is locked to indicate that the water must be emp-tied out before opening the door.Follow the below instructions to empty out the water:

1. Turn the programme selector dial to .

2. Select the draining or spinning programme.

3. Reduce the spin speed if needed, by pressing therelevant button.

4. Press button 7.At the end of the programme, the door is released and can

be opened. Turn the programme selector dial to toswitch the machine off.Remove the laundry from the drum and carefully checkthat the drum is empty. If you do not intend to carry outanother wash, close the water tap. Leave the door open toprevent the formation of mildew and unpleasant smells.Stand By: If your laundry is not removed within 10 mi-nutes after the programme is finished, the back light ofthe display switches off and the energy saving system willbe enabled. Only the pilot light of the button 7is blinkingto indicate that the appliance has to be switched off. Bypressing any button the appliance will come out from theenergy saving status and you can set another programmeor switch the appliance off.

Helpful hints and tipsSorting out the laundryFollow the wash code symbols on each garment label andthe manufacturers washing instructions. Sort the laundryas follows: whites, coloureds, synthetics, delicates, wool-lens.

Before loading the laundryNever wash whites and coloureds together. Whites maylose their whiteness in the wash.

New coloured items may run in the first wash; they shouldtherefore be washed separately the first time.Button up pillowcases, close zip fasteners, hooks andpoppers. Tie any belts or long tapes.

Remove persistent stains before washing.Rub particularly soiled areas with a special detergent ordetergent paste.Treat curtains with special care. Remove hooks or tie themup in a bag or net.

Remo ving stainsStubborn stains may not be removed by just water anddetergent. It is therefore advisable to treat them prior towashing.Blood:treat fresh stains with cold water. For dried stains,soak overnight in water with a special detergent then rubin the soap and water.

9


10/24

Oil based paint:moisten with benzine stain remover, laythe garment on a soft cloth and dab the stain; treat severaltimes.Dried grease stains:moisten with turpentine, lay the gar-ment on a soft surface and dab the stain with the fingertipsand a cotton cloth.Rust:oxalic acid dissolved in hot water or a rust removingproduct used cold. Be careful with rust stains which arenot recent since the cellulose structure will already havebeen damaged and the fabric tends to hole.Mould stains:treat with bleach, rinse well (whites and fastcoloureds only).Grass:soap lightly and treat with bleach (whites and fastcoloureds only).

Ball point pen and glue:moisten with acetone1), lay thegarment on a soft cloth and dab the stain.

Lipstick:moisten with acetone as above, then treat stainswith methylated spirits. Treat any residual marks withbleach.Red wine:soak in water and detergent, rinse and treat withacetic or citric acid, then rinse. Treat any residual markswith bleach.Ink:depending on the type of ink, moisten the fabric firstwith acetone1), then with acetic acid; treat any residualmarks on white fabrics with bleach and then rinse thor-oughly.Tar stains:first treat with stain remover, methylated spiritsor benzine, then rub with detergent paste.

Detergents and additivesGood washing results also depend on the choice of de-tergent and use of the correct quantities to avoid wasteand protect the environment.Although biodegradable, detergents contain substanceswhich, in large quantities, can upset the delicate balanceof nature.

The choice of detergent will depend on the type of fabric(delicates, woollens, cottons, etc.), the colour, washingtemperature and degree of soiling.All commonly available washing machine detergents maybe used in this appliance:

powder detergents for all types of fabric

powder detergents for delicate fabrics (60C max) andwoollens

liquid detergents, preferably for low temperature washprogrammes (60C max) for all types of fabric, or spe-cial for woollens only.

The detergent and any additives must be placed in theappropriate compartments of the dispenser drawer beforestarting the wash programme.If using liquid detergents, a programme withoutprewashmust be selected.Your appliance incorporates a recirculation system whichallows an optimal use of the concentrated detergent.Follow the product manufacturers recommendations onquantities to use and do not exceed the MA X m ark inthe detergent dispenser drawer.Quantity of detergent to be usedThe type and quantity of detergent will depend on the typeof fabric, load size, degree of soiling and hardness of thewater used.Follow the product manufacturers instructions on quan-tities to use.Use less detergent if:

you are washing a small load

the laundry is lightly soiled

large amounts of foam form during washing.

Degrees of water hardnessWater hardness is classified in so-called degrees ofhardness. Information on hardness of the water in yourarea can be obtained from the relevant water supply com-pany, or from your local authority. If the water hardnessdegree is medium or high we suggest you to add a watersoftener following always the manufacturers instructions.

When the degree of hardness is soft, readjust the quantityof the detergent.

1) do not use acetone on artificial silk

10


11/24

Washing programm esProgramme - Maximum and Minimum Temp eratureCycle Description - Maximum Spin SpeedMaximum Fabrics Load - Type of Laundry Options

DetergentCompartmentCOTTONS90 - 60- 401)

Main wash - RinsesMaximum spin speed 1000 rpm

Max. load 6 kg - Red. load 3 kg 2)White and colour cotton(normally soiled items).

SPINRINSE HOLD

PREWASH3)

DAILYSUPER QUICK

EASY IRONHOT WATER CONNEC-

TION

COTTONS30 - Cold


Max. load 6 kg - Red. load 3 kg 2)Colour cotton(normally or slightly soiled items).

SPINRINSE HOLD

PREWASH3)

DAILYSUPER QUICK

EASY IRON

SYNTHETICS60 - 401)


Max. load 3 kg - Red. load 1,5 kg 2)

Synthetic or mixed fabrics (normally soiled items).

SPINRINSE HOLD

PREWASH3)

DAILYSUPER QUICK

EASY IRONHOT WATER CONNEC-

TION

SYNTHETICS30 - ColdMain wash - RinsesMaximum spin speed 900 rpm

Max. load 3 kg - Red. load 1,5 kg 2)Synthetic or mixed fabrics(normally or slightly soiled items)

SPINRINSE HOLD

PREWASH3)

DAILYSUPER QUICK

EASY IRON

DELICATES40 - 30- ColdMain wash - RinsesMaximum spin speed 700 rpm

Max. load kg 3 - Red. load kg 1,5 2)Delicate fabrics(normally soiled items).

SPINRINSE HOLD

PREWASH3)

DAILYSUPER QUICK

11


12/24

Programme - Maximum and Minimum Temp eratureCycle Description - Maximum Spin SpeedMaximum Fabrics Load - Type of Laundry OptionsDetergentCompartment

WOOL- HANDWASH40 - 30 - ColdMain wash - RinsesMaximum spin speed 1000 rpmMax. load 2 kgWashing programme for machine washable wool as well as forhand washable woollens and delicate fabrics. Note: A single orbulky item may cause imbalance. If the appliance doesnt per-form the final spin phase, add more items, redistribute the loadmanually and then select the spinning programme.

SPINRINSE HOLD

SOAK30

Prewash - Soak for about 40 minutes - Stop with water in thetubMax. load 6 kgSpecial programme for heavily soiled laundry. The machineperforms a soak at 30C. At the end of this time the machinewill stop automatically with water left in the tub.Before starting a new washing phase, it is necessary to emptyout the water by:

Draining only: turn the programme selector dial to thedraining programme (press the button 7).

Draining and spinning: turn the programme selector dial tothe spinning programme, reduce the spin speed by pressingthe relevant button and then press button 7.Important This programme cannotbe used for very delicate

fabrics as silk or wool. Pour the detergent for the soak pro-gramme into the appropriate compartment. At the end of thesoak (after having emptied out the water) you can select thewashing programme (first turn the programme selector dial toO , then to the programme and press the button 7).

RINSESRinses with fabric softener if neededMaximum spin speed at 1000 rpmMax. load 6 kgWith this programme it is possible to rinse and spin garmentswhich have been washed by hand. The machine performs 3rinses, followed by a final long spin.

ImportantThe spin speed will automatically assume the setting for cottonitems. If required, reduce the speed to the desired level bypressing the relevant button.

SPINRINSE HOLDEASY IRON

12


13/24

Programme - Maximum and Minimum Temp eratureCycle Description - Maximum Spin SpeedMaximum Fabrics Load - Type of Laundry OptionsDetergentCompartment

DRAINDraining of waterMax. load 6 kgFor emptying out the water of the last rinse in programmes withthe Rinse Hold option selected and at the end of the Soak pro-gramme. Turn firstly the programme selector dial to O, then tothe draining programme and press the button 7.

SPINDrain and long spinMaximum spin speed 1000 rpmMax. load 6 kgSeparate spin for hand washed garments or at the end of a

programme which ends with water left in the tub (Rinse Holdand Night Cycle option selected or Soak programme).

ImportantThe spin speed will automatically assume the setting for cottonitems. If required, reduce the speed to the desired level bypressing the relevant button according to the type of fabric tobe spun.

SPIN

COTTONS ECONOMY60Main wash - RinsesMaximum spin speed 1000 rpmMax. load 6 kgWhite and fast colour cotton.This programme can be selected for slightly or normally soiledcotton items. The temperature will decrease and the washingtime will be extended. This allows to obtain a good washingefficiency so saving energy.

SPIN

RINSE HOLDPREWASH3)

EASY IRON

O = OFFFor cancelling the programme which is running or to switch the machine off .

1) In these programmes the water loading is the following: Cotton 90, only hot water; Cotton 60- 40 and Synthetics 60 - 40,hot and cold water. By pressing the button 6, it is possible to disable the hot water loading and the washing programme will beperformed with cold water which will be heated by the heating element in the appliance.

2) If you select the Super Quick option by pressing button 3, we recommend that you reduce the maximum load as indicated. (Red.load = reduced load). Full loading is possible however with somewhat reduced cleaning results.

3) If using liquid detergents, a programme without prewash must be selected.

What to do if ...Certain problems are due to lack of simple maintenanceor oversights, which can be solved easily without calling

out an engineer. Before contacting your local ServiceCentre, please carry out the checks listed below.

13


14/24

During machine operation it is possible that the redpilotlight of button 7blinks, one of the following alarm codesappears on the display and some acoustic signals soundevery 20 seconds to indicate that the machine is notworking:

: problem with the water supply.

: problem with the water draining.

: door open.Once the problem has been eliminated, press the button7to restart the programme. If after all checks, the problempersists, contact your local Service Centre.

Problem Possible cause/Solution

The machine does not start:

The door has not been closed.

Close the door firmly.The plug is not properly inserted in the power socket.

Insert the plug into the power socket.There is no power at the socket.

Please check your domestic electrical installation.The main fuse has blown.

Replace the fuse.The selector dial is not correctly positioned and the button 7has not beenpressed.

Please turn the selector dial and press the button 7again.The delay start has been selected.

If the laundry are to be washed immediately, cancel the delay start.The Child Safety Lock has been activated.

Deactivate the Child Safety Lock.

The ma chine does not fill:

The water tap is closed. Open the water tap.

The inlet hose is squashed or kinked.

Check the inlet hose connection.

The filter in the inlet hose is blocked.

Clean the water inlet hose filter.

The door is not properly closed.

Close the door firmly.

The machine does not empty and/ordoes not spin:

The drain hose is squashed or kinked.

Check the drain hose connection.

The drain filter is clogged.

Clean the drain filter.An option or a programme that ends with the water still in the tub or a thateliminates all the spinning phases has been selected.

Select the draining or spinning programme.The laundry is not evenly distributed in the drum.

Redistribute the laundry.

14


15/24


There is water on the floor:

Too much detergent or unsuitable detergent (creates too much foam) has beenused.

Reduce the detergent quantity or use another one.Check whether there are any leaks from one of the inlet hose fittings. It is not

always easy to see this as the water runs down the hose; check to see if it isdamp.

Check the water inlet hose connection.The drain or inlet hose is damaged.

Replace it with a new one.The cap on the emergency emptying hose has not been replaced or the filterhas not been properly screwed in after cleaning action.

Refit the cap on the emergency emptying hose or screw the filter fully in.

Unsatisfactory washing results:

Too little detergent or unsuitable detergent has been used.

Increase the detergent quantity or use another one.Stubborn stains have not been treated prior to washing.

Use commercial products to treat the stubborn stains.The correct temperature was not selected.

Check if you have selected the correct temperature.Excessive laundry load.

Reduce the laundry load.

The door will not open:

The programme is still running.

Wait the end of washing cycle.The door lock has not been released.

Wait until the pilot light 9 goes off.There is water in the drum.

Select drain or spin programme to empty out the water.

The machine vibrates is noisy:

The transit bolts and packing have not been removed.

Check the correct installation of the appliance.The support feet have not been adjusted

Check the correct levelling of the appliance.

The laundry is not evenly distributed in the drum. Redistribute the laundry.Maybe there is very little laundry in the drum.

Load more laundry.

15


16/24


Spinning starts late or the mac hinedoes not spin:

The electronic unbalance detection device has cut in because the laundry isnot evenly distributed in the drum. The laundry is redistributed by reverserotation of the drum. This may happen several times before the unbalancedisappears and normal spinning can resume. If, after 10 minutes, the laundryis still not evenly distributed in the drum, the machine will not spin. In thiscase, redistribute the load manually and select the spin programme.

Redistribute the laundry.The load is too small.

Add more items, redistribute the load manually and then select the spinningprogramme.

The machine makes an unusualnoise:The machine is fitted with a type of motor which makes an unusual noisecompared with other traditional motors. This new motor ensures a softer startand more even distribution of the laundry in the drum when spinning, as wellas increased stability of the machine.

No w ater is visible in the drum: Machines based on modern technology operate very economically using verylittle water without affecting performance.

If you are unable to identify or solve the problem, contactour service centre. Before telephoning, make a note of themodel, serial number and purchase date of your machine:the Service Centre will require this information.

Mod. ... ... ...

Prod. No. ... ... ...

Ser. No. ... ... ...

Mod

..........

Prod

.No.

........

Ser.N

o..........

Technical dataDimensions Width

HeightDepth

60 cm85 cm63 cm

Electrical connectionVoltage - Overall power - Fuse

Information on the electrical connection is given on the rating plate, on theinner edge of the appliance door.

Water supply pressure MinimumMaximum

0,05 MPa0,8 MPa

Maximum Load Cotton 6 kg

Spin Speed Maximum 1000 rpm

16


17/24

Consumption valuesOnly cold water loading

Programme Energy consumption(KWh) Water consumption ( li tres) Programme duration (Mi-nutes)White Cottons 90 2.0 61

For the duration of the pro-grammes, please refer tothe display on the controlpanel.

Cottons 60 1.3 58

Cottons EC O60 1) 1.02 54Cottons 40 0.7 58

Synthetics 60 1.0 54


Delicates 40 0.55 60

Wool/Handwash 30 0.4 531) Cottons Eco at 60C with a load of 7 kg is the reference programme for the data entered in the energy label, in compliance with

EEC 92/75 standards.

Cold and hot water loading (The highest hot water temperature allowed is 55C)Programme Energy consumption(KWh) Water consumption ( li tres) Programme duration (Mi-nutes)

White Cottons 90 1.2 61

For the duration of the pro-grammes, please refer tothe display on the controlpanel.

Cottons 60 0.6 54

Cottons 40 0.5 58



The consumption data shown on this chart is to be considered purely indicative, as it may vary depending onthe quantity and type of laundry, on the inlet water temperature and on the ambient temperature.

Care and cleaningWarning You must DISCONNECT the appliancefrom the electricity supply, before you can carry out

any cleaning or maintenance work.

DescalingThe water we use normally contains lime. It is a good ideato periodically use a water softening powder in the ma-chine. Do this separately from any laundry washing, andaccording to the softening powder manufacturer's in-

structions. This will help to prevent the formation of limedeposits.

External cleaningClean the exterior cabinet of the appliance with soap andwater only, and then dry thoroughly.

Cleaning the dispenser drawerThe washing powder and additive dispenser drawershould be cleaned regularly.

17


18/24

Remove the drawer bypressing the catch down-wards and by pulling itout. Flush it out under atap, to remove any tracesof accumulated powder.

To aid cleaning, the toppart of the additive com-partment should be re-moved.

Cleaning the drawer recessHaving removed the draw-er, use a small brush toclean the recess, ensuringthat all washing powderresidue is removed fromthe upper and lower part ofthe recess.

Replace the drawer and run the rinse programme with-out any clothes in the drum.

Cleaning the pum pThe pump should be inspected if:

the machine does not empty and/or spin;

the machine makes an unusual noise during drainingdue to objects such as safety pins, coins etc. blockingthe pump.

Proceed as follows: disconnect the appliance;

if necessary wait until the water has cooled down.

Open the pump door.Place a container close tothe pump to collect anyspillage.

Pull out the emergencyemptying hose, place it inthe container and removeits cap.

When no more water comes out, unscrew the pumpcover and remove it. Always keep a rag nearby to dryup spillage of water when removing the cover.

Remove any objects fromthe pump impeller by ro-tating it.Put the cap back on the

emergency emptying hoseand place the latter back inits seat.

Screw the pump coverfully in.Close the pump door.

Caution When the appliance is in use anddepending on the programme selected there can be

hot water in the pump.Never remove the pump cover during a wash cycle, alwayswait until the appliance has finished the cycle, and isempty. When replacing the cover, ensure it is securely re-

tightened so as to stop leaks and young children beingable to remove it.

Cleaning the water inlet filterIf your water is very hard or contains traces of lime deposit,the water inlet filter may become clogged. It is thereforea good idea to clean it from time to time.

18


19/24

Turn off the water tap. Un-screw the water inlet hose.Clean the filter using ahard bristle brush. Tightenup the inlet hose.

Frost precautionIf the machine is exposed to temperatures below 0C,certain precautions should be taken.

Turn off the water tap.

Unscrew the inlet hose.

Place the end of the emergency emptying hose and that

of the inlet hose in a bowl placed on the floor and letwater drain out.

Screw the water inlet hose back on and reposition theemergency emptying hose after having put the cap onagain.

When you intend to start the machine up again, makesure that the room temperature is above 0C.

Emergency emptying outIf the water is not discharged, proceed as follows to emptyout the machine:

pull out the plug from the power socket;

close the water tap;

if necessary, wait until the water has cooled down;

open the pump door;

place a bowl on the floor and place the end of theemergency emptying hose into the bowl. Remove its

cap. The water should drain by gravity into the bowl.When the bowl is full, put the cap back on the hose.Empty the bowl. Repeat the procedure until water stopsflowing out;

clean the pump if necessary as previously described;

replace the emergency emptying hose in its seat afterhaving plugged it;

screw the pump cover again and close the door.

Important Every time you drain the water through theemergency emptying hose you must pour 2 litres of waterinto the main wash compartment of the detergent drawerand then run the drain programme. This will activate theECO Valvedevice avoiding that part of the detergentremains unused at next washing.

InstallationUnpackingAll transit bolts and packing must be removed before us-ing the appliance.You are advised to keep all transit devices so that theycan be refitted if the machine ever has to be transported

again.

After removing all thepackaging, carefully laymachine on it's back to re-move the polystyrene basefrom the bottom.

Remove the power supplycable and the drain hosefrom the hose holders onthe rear of the appliance.

19


20/24

Unscrew the three bolts. Slide out the relevant plas-tic spacers.

Open the porthole, takeout inlet hoses and re-move the polystyreneblock fitted on the doorseal.

Fill the smaller upper holeand the two large oneswith the correspondingplastic plug caps suppliedin the bag containing theinstruction booklet.

PositioningInstall the machine on a flat hard floor. Make sure that aircirculation around the machine is not impeded by carpets,rugs etc. Check that the machine does not touch the wallor other kitchen units. Level the washing machine byraising or lowering the feet. The feet may be tight to adjustas they incorporate a self locking nut, but the machineMUST be level and stable.Any necessary adjustment can be made with a spanner.Accurate levelling prevents vibration, noise and displace-ment of the machine during operation. Never place card-board, wood or similar materials under the machine tocompensate for any unevenness in the floor.

If necessary, check thesetting with a spirit level.

Water inletThe inlet hoses are supplied with the appliance and canbe found inside the machine drum.

Caution Before connecting up the appliance to newpipework or to pipework that has not been used for

some time, run off a reasonable amount of water to flush

out any debris that may have collected

Caution Do not use the hose from your previousappliance to connect to water supply.

1. Connect the hoses with the angled connection to themachine. The hot water hose is provided with a red nutand must be linked on the right side. (See the illustratedinstructions on the label hanged on the back of the ap-pliance).

45

35

Warning Do not place the inlet hose down-wards.Angle the hose to the left or right depend-

ing on the position of your water tap. Set the hose cor-rectly by loosening the ring nut. After positioning theinlet hose, be sure to tighten the ring nut again to pre-vent leaks.

2. Set the hoses correctly by loosening the ring nut.After positioning the inlet hoses, be sure to tighten thering nut again to prevent water leaks.

3. Connect either the hosefor cold water or the hosefor hot water to a tap witha 3/4 thread. Always usethe hoses supplied withthe appliance. If there is notap for hot water, connectonly the cold water hose:the water will be heated inthe tub.

20


21/24

Caution The inlet hose must not be lengthened. Ifit is too short and you do not wish to move the tap,

you will have to purchase a new, longer hose speciallydesigned for this type of use.

Water drainageThe end of the drain hose can be positioned in three ways:

Hooked over the edge of asink using the plastic hoseguide supplied w ith themachine.

In this case, make sure the end cannot come unhookedwhen the machine is emptying. This could be done bytying it to the tap with a piece of string or attaching itto the wall.

In a sink drain pipe branch . This branch must be abovethe trap so that the bend is at least 60 cm above theground.Directly into a drain pipe at a height of not less than 60cm and not more than 90 cm. The end of the drain hosemust always be ventilated, i.e. the inside diameter ofthe drain pipe must be larger than the outside diameter

of the drain hose. The drain hose must not be kinked.

Electrical connectionInformation on the electrical connection is given on therating plate on the inner edge of the appliance door.

Check that your domestic electrical installation can takethe maximum load required, also taking into account anyother appliances in use.

Caution Conn ect the mach ine to an earthed socket.Caution The manu facturer does not accept any

responsibility for damage or injury through failure tocomply with the above safety precaution.Caution The power supply cable must be easilyaccessible after installing the m achine.Caution Should the appliance power supply cableneed to be replaced, this must be carried out by aService Centre.

Environment concernsThe symbol on the product or on its packagingindicates that this product may not be treated ashousehold waste. Instead it should be taken to theappropriate collection point for the recycling of electricaland electronic equipment. By ensuring this product isdisposed of correctly, you will help prevent potentialnegative consequences for the environment and humanhealth, which could otherwise be caused by inappropriatewaste handling of this product. For more detailedinformation about recycling of this product, pleasecontact your local council, your household waste disposalservice or the shop where you purchased the product.

Packaging materialsThe materials marked with the symbol are recyclable.>PEPSPP


22/24

The machine works more economically if it is fullyloaded.

With adequate pre-treatment, stains and limited soilingcan be removed; the laundry can then be washed at alower temperature.

Measure out detergent according to the water hard-ness, the degree of soiling and the quantity of laundrybeing washed.

22


23/2423


24/24

132956720-01-372009

zanussi zwgh7105

Documents