zenem introduction r3

Copyright 2016 ZENEM Corporation

Who we are and What we do Capabilities of ZENEM Product Examples Customer References Leadership Team Information

Quick Turn Prototyping New Product Introduction System and Box Builds

ZENEM Corporation Overview

Who We Are

ZENEM Corporation was founded by Engineers and Contract Manufacturing Executives with over 80 years combined industry experience with a drive to the highest quality standards.

The company occupies a 18,000 sq ft. manufacturing facility in Tempe, AZ, with two automated SMT production lines. We have a strong and growing customer base and the capacity for significant additional business.

What We Do

ZENEM provides Electronic Manufacturing Services (EMS) for consumer electronics, medical, automotive, and aerospace customers. The Company specializes in quick-turn prototypes, new product introduction, high volume production and full turnkey production of system and box builds.

SMT Assembly Through Hole Assembly RoHS and Leaded Alloy Processes Very small to very large boards BGA and Micro-BGA Dense Packed Designs, Complex Profiles IPC-Trained Hand Soldering Press-Fit Connectors Board Testing Cable and Harness Assembly Mechanical Assembly and Test Control Panels Electro-Mechanical Assemblies Wave Solder Xray Conformal Coat

SMT Assembly Area

Capabilities of ZENEM

MPM HiE Screen Printer Fully automated screen printer Applies solder paste to 120+ PCB

panels per hour Automatic 2-D solder inspection

Dek Horizon LT Screen Printers Fully automated screen printer Automatic 2-D solder inspection Programmable under-stencil

cleaning

Manufacturing Equipment

Phillips Orion and Emerald Pick and Place 4000+ placements per hour 0402 component placement

(passives, oddform) Off-line set-up and programming

for extremely fast line change

Phillips Topaz and Emerald Pick and Place 4000+ placements per hour 0201 component placement

(passives, BGA, Micro-BGA) High precision placement for large

and complex parts Off-line set-up and programming

for extremely fast line change


Electrovert and ERSA Reflow Ovens 5 and 7 zone reflow ovens Complex profiles RoHS or leaded solder Multi-layer, single or double sided

boards

CR Technologies Automatic Optical Inspection Verification of component type,

placement, and orientation


Electronics Assembly Stations 20 individual stations for hand

soldering, assembly, programming, inspection, and testing

RoHS and Leaded stations separated to ensure no cross-contamination

Dedicated stations for chip programming, board and system level testing, and mechanical assembly

Bonded Inventory and Materials Management Segregated materials

management areas. Off-line job setup and quality

check Supplier qualification and tracking

Electronic Assembly Workstationwith product in Functional Test

Manufacturing Infrastructure

High Volume and Proto

Prototype

High Volume

Aerospace and Military

Military

Aerospace

Automotive and Consumer

Consumer

Automotive


Intel Prototype

Micro BGA Placement Fine Pitch IC Placement Card Edge Connectors Surface Mount and Thru-Hole

Prototype Projects

Micro BGA/WCSP

1.2mm by 1.7mm package 0.4mm pitch 0.23mm bump diameter


Hi Resolution Medical Microscope Camera

Dense Board, Double-Sided Fine-Pitch Placements Precision Rotations

Optics Controls


RFID Tracking Devices

Double-sided, Dense Packed, Fine Pitch

Product Samples

Personal Safety Device

Complex soldering (Stainless Steel to Copper)

Extremely small form factors (¼” x ¼”)


ZENEM is proud to be in partnership with AZTERA. AZTERA has a specialized team of engineers that can help you accelerate the pace of your technology development. They are well known for creating innovation, precision technology for the energy, manufacturing, and life science industries. http://www.aztera.com

A few Areas of Expertise are below:• Electrical

• Hardware electronic design and layout• Mechanical

• Mechanical design from concept to production –SolidWorks, Test fixtures

• Software and testing • LabVIEW development and architecture(Certified

LabVIEW developers and architects)

Engineering Partners

http://www.aztera.com/

http://www.aztera.com/

Elite Power Solutions –Premier provider of turn-key solutions for advanced energy storage and electric vehicle applications.www.elitepowersolutions.com

SunDanzer– Solar powered refrigeration, providing sustainable solutions to off-grid refrigeration needs.www.sundanzer.com

Peace-of-mind for the homeowner by automatically closing the garage door.www.protectrix.com

Acme Aerospace is the Only True “One-Stop” Battery and Electronics Company. Serving Military and Commercial Aircraft manufacturers.http://www.acme-aero.com

Customer References

http://www.elitepowersolutions.com/

http://www.sundanzer.com/

http://www.protectrix.com/

http://www.acme-aero.com/

Aaron Trask 15 years experience in engineering, technology, consulting, and manufacturing and

business ownership. Supporting Engineer for Manufacturing, Quality and Continuous Improvement on

Medical, Aerospace, Government and Consumer Product industries. Assisted the establishment of both AS9100 quality systems and NADCAP certification. Aaron is our Chief Executive Officer.

• Marcus Shewmaker 19 years experience in engineering, technology, consulting, and manufacturing. Experienced Engineer leading efforts in Design, Manufacturing, Quality and

Continuous Improvement on Medical, Aerospace, Government and Consumer Product industries.

Marcus is our Chief Technology Officer. Sarah Corey

Combined 10 years in Aerospace Government Contracts, Customer Service, Sales, Computer Operations, and Green Belt Certified.

Sarah is our Chief Financial Officer, and also serves as our acting Operations Director. Dustin Corey

8 years experience in electronics manufacturing, including commodity procurement , scheduling and quotes.

Supporting Engineer for Manufacturing, Quality and Continuous Improvement on Medical, Aerospace, Government and Consumer Product industries.

Dustin spearheads our Business Development efforts.

Leadership Team


ZENEM Corporation is committed to providing high quality products and services that exceed the expectations of our customers.

Our policy is achieved through continuous improvement to our quality system and by implementing programs that enable each employee to do their job efficiently and correctly.

Quality Policy



Business Development:

[email protected]

Company Headquarters:

Zenem Corporation 2441 W. Erie Drive Tempe, AZ 85282

office: 480-998-1213email: [email protected]:www.zenemcorp.com

Contact Us!

Contact Information


mailto:[email protected]

mailto:[email protected]

http://www.microtechaz.com/

zenem introduction r3

Documents