zero-turn mower spec guide - grounds maintenance

zero-turn MOWER SPEC GUIDE

2 zero-turn MOWER SPEC GUIDE


zero-turn MOWER SPEC GUIDE 3





BUSH HOGModel

Approx. price

EngineSpeed range(mph)

Cutting width

(inches)

Cutting heights(inches)

Overall length

(inches)

Overall width**(inches)

Weight(pounds)

Fuel capacity (gallons)

Mid or front mount?

Tire size

ZT180/ZT230/ZT250/ZT220-W * Kohler 18/23/25/

Kawasaki 22 hp 0 – 8 48-60 1 – 5 101 60.5 to 72.5 1,190–1,260 5 Front 21x11

M 2255 * Kohler 22 hp 0 – 10 55 1 – 4.25 85 66.6 1,170 10 Mid 24x12

M 2261 * Kohler 22 hp 0 – 10 61 1 – 4.25 85 72.6 1,220 10 Mid 24x12

M 2355 * Kohler 23 hp 0 – 10 55 1 – 4.25 85 66.6 1,185 10 Mid 24x12

M 2361 * Kohler 23 hp 0 – 10 61 1 – 4.25 85 72.6 1,235 10 Mid 24x12

M 2555 * Kohler 25 hp 0 – 10 55 1 – 4.25 85 66.6 1,175 10 Mid 24x12

M 2561 * Kohler 25 hp 0 – 10 61 1 – 4.25 85 72.6 1,225 10 Mid 24x12

M 2555K * Kawasaki 25 hp 0 – 10 55 1 – 4.25 85 66.6 1,170 10 Mid 24x12

M 2561K * Kawasaki 25 hp 0 – 10 61 1 – 4.25 85 72.6 1,220 10 Mid 24x12

M 2661 * Kohler 26 hp 0 – 10 61 1 – 4.25 85 72.6 1,225 10 Mid 24x12

M 2673 * Kohler 26 hp 0 – 10 73 1 – 4.25 87 84.6 1,300 10 Mid 24x12*Check with supplier for pricing. **With chute up.

The new Bush Hog mid-mount zero-turn mowers deliver cutting performance with standard high-uplift blades, pivoting front axle that follows ground contours, fully baffled deck, full compliment of anti-scalp rollers and an easy-to-use grass-collection system. Durability is provided by deep-deck design built with all-welded, 7-gauge material for uniform strength; heavy cast-iron spindles; high output, maintenance-free battery; heavy-duty air filtration system on Kohler 25- and 26-hp engines; easy clean out ports and low oil pressure and high engine temperature indicator lights and audible warnings on Kohler powered models; and high capacity, electromagnetic clutch with 175 pounds of torque.

BOB-CAT

ModelApprox.

priceEngine

Speed range (mph)

Cutting width

(inches)

Cutting heights (inches)

Overall length

(inches)

Overallwidth**(inches)

Weight(pounds)


Mid or front

mount?Tire size

ZT-125 * Kohler 25 hp 0 – 6 42 or 48 1.5 – 4.5 93.5 44 or 50 *** 5.3 Mid 13x6.50-6

218ES * Briggs & Stratton 18 hp V2 0 – 8 52 1.5 – 4.5 80.5 58.25 to 64.5 *** 9.5 Mid 23x8.50-12

ZT-219 * Kawasaki 19 hp OHV-V2 gas/19-hp diesel OHV-V2 0 – 8 48 or 52 1.5 – 4.5 80 54 to 64.5 *** 9.5 Mid 23x8.50-12 or

23x10.50-12

ZT-223 * Kawasaki 23 hp OHV-V2 0 – 8 52 or 61 1.5 – 4.5 80 58.25 to 73 *** 9.5 Mid 23x10.50-12

ZT-223LC * Kohler 23 hp OHV-V2 0 – 8 61 1.5 – 4.5 80 62 to 73 *** 12 Mid 23x10.50-12

ZT-225 * Kawasaki 25 hp OHV-V2 or Kohler 25 hp OHV-V2 0 – 8 52 or 61 1.5 – 4.5 80 58.25 to 73 *** 12 or 9.5 Mid 23x12.00-12

ZT-226EFI * Kohler 26 hp EFI OHV-V2 0 – 8 61 or 72 1.5 – 4.5 80 62 to 84 *** 9.5 Mid 23x12.00-12*Check with supplier for pricing. **With discharge chute down. ***Not available.

The Bob-Cat ZT 200 Series of zero-turning radius mowers offer professional lawn care and landscaping contractors a wide choice of engine options and deck sizes. Each comes standard with the fully floating, suspended Coutour Cut mowing system that deliv-ers quality cut without scalping, advanced engine mount to reduce vibration, top-mounted sealed spindles for greater reliability, comfortable suspension seat and wide tires with minimal turf compaction.

BUNTONModel

Approx.price

EngineSpeed range (mph)

Cutting width

(inches)


Overall length(inches)


Weight(pounds)


Mid or front

mount?Tire size

BZT 1250 * Kohler 25 hp 0 – 6 42 or 48 1.5 – 4.5 93.5 46 to 50 *** 5.3 Mid 13x6.50-6

2180ES * Briggs & Stratton 18 hp 0 – 8 52 1.5 – 4.5 80.5 58.25 to

64.5 *** 12 Mid 23x8.50-12

BZT-2190 * Kawasaki 19 hp 0 – 8 48 or 52 1.5 – 4.5 80 54 to 64.5 *** 12 Mid 23x8.50-12

BZT-2230 * Kawasaki 23 hp 0 – 8 52 or 61 1.5 – 4.5 80 58.25 to 73 *** 12 Mid 23x10.50-12 or

24x12.00-12

BZT-2250 * Kawasaki 25 hp 0 – 8 61 1.5 – 4.5 80 62 to 73 *** 12 Mid 24x12.00-12

BZT-2260EFI * Kohler 26 hp 0 – 8 61 or 72 1.5 – 4.5 80 62 to 84 *** 12 Mid 24x12.00-12

BZT-2230LC * Kohler 23 hp 0 – 8 52 or 61 1.5 – 4.5 80 58.25 to 73 *** 12 Mid 23x10.50-12 ro

24x12.00-12*Check with supplier for pricing. **With discharge chute down. **Not available.

The Bunton BZT 2000 Series zero-turn mowers feature a wide choice of engine options. Each comes standard with ergonomically designed operator controls that boost productivity, reduce operator fatigue and safely achieve results. The fully floating, suspended TufDeck design features a heavy-duty, welded 10-gauge steel deck and 7-gauge steel skirts that deliver quality cut.

Circle (508) on Reply Card freeproductinfo.net/gm







COUNTRY CLIPPERModel

Approx. price


Cutting* width

(inches)


Overall length

(inches)

Overall* width

(inches)

Weight**(pounds)


Mid or front

mount?Tire size

1638KOJI $3,195.00 Kohler 16 hp 0 – 6 38 1.5 – 4 77 49 600 4.35 Mid 18


1742KOJ $3,995.00 Kohler 17 hp 0 – 8 42 1.5 – 4 77 43 625 4.5 Mid 18

1748KOJ $4,546.00 Kohler 17 hp 0 – 8 48 1.5 – 4 77 58 650 4.5 Mid 18

1752KOJ $4,649.00 Kohler 17 hp 0 – 8 52 1.5 – 4 77 62 660 4.5 Mid 18

1942KAJ $4,808.00 Kawasaki 19 hp 0 – 8 42 1.5 – 4 77 43 650 4.5 Mid 18



2042KOJ $4,808.00 Kohler 20 hp 0 – 8 42 1.5 – 4 77 43 650 4.5 Mid 18

2048KOJ $4,874.00 Kohler 20 hp 0 – 8 48 1.5 – 4 77 58 675 4.5 Mid 18

2052KOJ $4,996.00 Kohler 20 hp 0 – 8 52 1.5 – 4 77 62 690 4.5 Mid 18

1706KAJ/KAT $6,769.00 Kawasaki 17 hp 0 – 10 42/48 1.5 – 5 80.5 53/58 715/720 11 Mid 23


2304M/MT $7,557.00 Kohler 23 hp 0 – 10 52/60 1.5 – 5 81 62/70 720 11 Mid 23

2304KA $7,557.00 Kawasaki 23 hp 0 – 10 52/60 1.5 – 5 81 62/70 720 11 Mid 23

2504M/MT $7,920.00 Kohler 25 hp 0 – 10 52/60 1.5 – 5 81 62/70 720 11 Mid 23

2505KOJ/KOT $8,326.00 Kohler 25 hp 0 – 10 52/60 1.5 – 5 84 62/70 763 11 Mid 24

2505KAJ/KAT $8,326.00 Kawasaki 25 hp 0 – 10 52/60 1.5 – 5 84 62/70 763 11 Mid 24


2707KOJ/KOT $8,794.69 Kohler 27 hp 0 – 10 72 1.5 – 5 84 82 775 11 Mid 24

*Two decks are available—with 52- and 60-inch cutting widths—and each fits both models. **Tractor only. Decks add approx. 235 pounds.

The Country Clipper JAZee and JAZee One are designed and engineered primarily for the residential and estate markets. Features include patented stand-up deck feature, joystick steering, commercial-grade engines, heavy-gauge welded deck, competitive pricing and more. All mowers offer a standard 2-/3-year limited warranty.

CUB CADET COMMERCIALModel

Approx. FOB price


Cutting width

(inches)



Overall width

(inches)**

Weight(pounds)


Mid or front mount?

Tire size

M48-KW $6,999 Kawasaki 19 hp * 48 1 – 5 73 59 980 * Mid 23x9.5

M54-KW $8,199 Kawasaki 23 hp * 54 1 – 5 78 65 1035 * Mid 24x12

M60-KW $8,499 Kawasaki 25 hp * 60 1 – 5 78 71 1,050 * Mid 24x12*Not available. **With chute.

The M60 Tank Mid-Mount Zero-Turn mower has a 23-hp Kawasaki V-twin OHV engine and a 60-inch deck. The M48 and M54 Tank models offer a 48-inch and 54-inch cut and are powered by a 19-hp and 23-hp Kawasaki engine, respectively. All of the Tanks offer a Command Cut System with a floating, fabricated cutting deck that allows a quality cut; marbane blades with 1.7-inch overlap for a cleaner cut, especially in tight turns; and a fully welded steel frame. They also feature increased weight distribution with 75 percent of their weight in the rear and wider tires that reduce soil compaction and turfing.

DERBY

ModelApprox.

priceEngine

Speed range (mph)

Cutting width

(inches)



Overall width

(inches)

Weight(pounds)

Fuel capac-ity (gallons)

Mid or front

mount?Tire size

Stallion ZT2561 $7,999 Kohler 25 hp 0 – 8.5 61 1.5 – 4.75 81 61 1,061 9 Mid 23x10.5

Colt ZT2148 $6,299 Kohler 21 hp 0 – 8.5 48 1.5 – 4.5 74 48 950 9 Mid 23x9.5


The 2003 model Stallion has been improved with 4-wheel independent suspension, which provides vertical travel at each front wheel to help keep all four wheels on the ground for a smoother, more comfortable ride and improved traction. The new Derby Colt features front-wheel independent suspension.








COUNTRY CLIPPERModel

Approx. price


Cutting* width

(inches)


Overall length

(inches)

Overall* width

(inches)

Weight**(pounds)


Mid or front

mount?Tire size



1742KOJ $3,995.00 Kohler 17 hp 0 – 8 42 1.5 – 4 77 43 625 4.5 Mid 18

1748KOJ $4,546.00 Kohler 17 hp 0 – 8 48 1.5 – 4 77 58 650 4.5 Mid 18

1752KOJ $4,649.00 Kohler 17 hp 0 – 8 52 1.5 – 4 77 62 660 4.5 Mid 18




2042KOJ $4,808.00 Kohler 20 hp 0 – 8 42 1.5 – 4 77 43 650 4.5 Mid 18

2048KOJ $4,874.00 Kohler 20 hp 0 – 8 48 1.5 – 4 77 58 675 4.5 Mid 18

2052KOJ $4,996.00 Kohler 20 hp 0 – 8 52 1.5 – 4 77 62 690 4.5 Mid 18



2304M/MT $7,557.00 Kohler 23 hp 0 – 10 52/60 1.5 – 5 81 62/70 720 11 Mid 23

2304KA $7,557.00 Kawasaki 23 hp 0 – 10 52/60 1.5 – 5 81 62/70 720 11 Mid 23

2504M/MT $7,920.00 Kohler 25 hp 0 – 10 52/60 1.5 – 5 81 62/70 720 11 Mid 23


2505KAJ/KAT $8,326.00 Kawasaki 25 hp 0 – 10 52/60 1.5 – 5 84 62/70 763 11 Mid 24


2707KOJ/KOT $8,794.69 Kohler 27 hp 0 – 10 72 1.5 – 5 84 82 775 11 Mid 24

*Two decks are available—with 52- and 60-inch cutting widths—and each fits both models. **Tractor only. Decks add approx. 235 pounds.

The Country Clipper JAZee and JAZee One are designed and engineered primarily for the residential and estate markets. Features include patented stand-up deck feature, joystick steering, commercial-grade engines, heavy-gauge welded deck, competitive pricing and more. All mowers offer a standard 2-/3-year limited warranty.

CUB CADET COMMERCIALModel

Approx. FOB price


Cutting width

(inches)



Overall width

(inches)**

Weight(pounds)


Mid or front mount?

Tire size

M48-KW $6,999 Kawasaki 19 hp * 48 1 – 5 73 59 980 * Mid 23x9.5

M54-KW $8,199 Kawasaki 23 hp * 54 1 – 5 78 65 1035 * Mid 24x12

M60-KW $8,499 Kawasaki 25 hp * 60 1 – 5 78 71 1,050 * Mid 24x12*Not available. **With chute.

The M60 Tank Mid-Mount Zero-Turn mower has a 23-hp Kawasaki V-twin OHV engine and a 60-inch deck. The M48 and M54 Tank models offer a 48-inch and 54-inch cut and are powered by a 19-hp and 23-hp Kawasaki engine, respectively. All of the Tanks offer a Command Cut System with a floating, fabricated cutting deck that allows a quality cut; marbane blades with 1.7-inch overlap for a cleaner cut, especially in tight turns; and a fully welded steel frame. They also feature increased weight distribution with 75 percent of their weight in the rear and wider tires that reduce soil compaction and turfing.

DERBY

ModelApprox.

priceEngine

Speed range (mph)

Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front

mount?Tire size

Stallion ZT2561 $7,999 Kohler 25 hp 0 – 8.5 61 1.5 – 4.75 81 61 1,061 9 Mid 23x10.5



The 2003 model Stallion has been improved with 4-wheel independent suspension, which provides vertical travel at each front wheel to help keep all four wheels on the ground for a smoother, more comfortable ride and improved traction. The new Derby Colt features front-wheel independent suspension.

DIXIE CHOPPER

ModelApprox.

priceEngine

Speed range (mph)

Cutting width

(inches)

Cutting height

(inches)

Overall length

(length)

Overall width

(inches)

Weight (pounds)


Mid or front

mount?

Tire size

XXWD5000 * Kohler 50 HP 0 – 13 72 1.75 – 5.75 76 76 ** 14 Mid 25X12

XWK2303 * Kawasaki 23 HP 0 – 10 60 1.75 – 5.75 75 65 ** 6 Mid 22x11

XF2300 * Kohler 23 HP 0 – 13 60 1.75 – 5.75 75 65 ** 10 Mid 25x12

LX2001 * Kohler 20 HP 0 – 8 42 1.75 – 5.75 75 45 ** 6 Mid 22.5x10

X2001 * Kohler 20 HP 0 – 8 50 1.75 – 5.75 75 54 ** 6 Mid 22.5x10

XK2503 * Kawasaki 25HP 0 – 8 50 1.75 – 5.75 75 54 ** 6 Mid 25x12

XW2400 * Honda 24 HP 0 – 12 60 1.75 – 5.75 75 65 ** 10 Mid 25x12

XW2300 * Kohler 23 HP 0 – 12 60 1.75 – 5.75 75 65 ** 10 Mid 25x12

XXW4600 * Kohler 46 HP 0 – 13 72 1.75 – 5.75 75 76 ** 14 Mid 26x12

XT3000-72 * Generac 30 HP 0 – 15 72 1.75 – 5.75 77.25 75.5 ** 14 Mid 26x12

XT2800-72 * Kohler 28 HP 0 – 13 72 1.75 – 5.75 77.25 75.5 ** 14 Mid 25x12

XT3000-60 * Generac 30 HP 0 – 14 60 1.75 – 5.75 75 65 ** 10 Mid 25x12

XT2800-60 * Kohler 28 HP 0 – 15 60 1.75 – 5.75 75 65 ** 10 Mid 25x12

XWF2700-60 * Kohler 27 HP 0 – 12 60 1.75 – 5.75 75 65 ** 10 Mid 25x12

XFG2700-60 * Generac 27 HP 0 – 12 60 1.75 – 5.75 75 65 ** 10 Mid 25x12

LT2000-50 * Kohler 20 HP 0 – 8 50 1.75 – 4.50 75 54 ** 6 Mid 24-10.5*Check with supplier for pricing. *Not available.

Dixie Chopper mowers are equipped with standard features including a welded tube frame, front caster taper roller bearings, two-piece mower deck construction and foot-operated deck height adjustment. Low-pressure ATV-type tires give the mowers a smoother ride. The mowing blades have a tip speed of 19,000 feet per minute. The “quad-loop” cooling system constantly flushes and replaces high-pressure drive oil with cooled, filtered oil.

DIXON INDUSTRIESModel

Approx. price


Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front

mount?Tire size

ZTR 8026D * Daihatsu 26.5 hp diesel 0 – 10 60 or 72 1.5 – 6 ** 73.5 or 85.5 1,331 or 1,361 11.5 Mid 23x10.5

ZTR 8025 * Kohler 25 hp 0 – 10 60 or 72 1.5 – 6 ** 73.5 or 85.5 1,021 or 1,051 11.5 Mid 23x10.5

ZTR 7525 * Kohler 25 hp 0 – 10 60 1.5 – 5 ** 69.5 970 11 Mid 23x9.5*Check with supplier for pricing. **Not available.

The Dixon ZTR 8025 is powered by a 25-hp Kohler Pro Series engine, and the Dixon ZTR 8026 uses the Daihatsu 26.5 diesel engine. The Dixon ZTR 8000 Series features a patented “big-rig” seat suspension that provides a smooth ride for less stress and fatigue. Both mowers can be equipped with either a 60- or 72-inch mowing deck and are available with a wide range of attachments. White wheel motors and Hydro-Gear BDU pumps provide zero-turning radius maneuverability.

ENCOREModel

Approx. price


Cutting width (inches)




Weight(pounds)


Mid or front

mount?

Tire size

Z34 * Kawasaki 15 hp 0 – 7.5 34 1 – 4.5 *** 35 600 3.5 Mid 18x8

Z42/Z48/Z52 * Kawasaki 17, 19 or 21 hp 0 – 8.5 42, 48 or 52 1 – 4.5 *** 52.9-64.75 755-805 7 Mid 20x10

Prowler FC * Kawasaki 25 or 27 hp Daihatsu 27 hp 0 – 8.5 52, 61 or 72 1 – 5 *** 84 1,005 – 1,074 6 Front 20x10

Prowler MC * Kawasaki 25 or 27 hpDaihatsu 27 hp 0 –10 52, 61 or 72 1 – 5 *** 84 1,042 – 1,074 11 Mid 24x12

*Check with supplier for pricing. **With deflector chute. ***Not available.

Encore’s Prowler Mid Cut features a side-to-side articulating floating deck, which allows both front wheels to maintain ground contact over rough terrain, improving stability and smoothing out the ride while it reduces scalping. To give a level cut at even high speeds, a PTO shaft feeds power to the blades and a heavy-gauge welded steel deck with special reinforcement channels controls vibration. Disc brakes and maintenance-free blade spindles are standard. Operator controls have been repositioned and the height adjustment has been extended within easy reach. Units can be outfitted with high horsepower gas or diesel engine options, liquid-cooled and air-cooled. ROPS option available.








GRASSHOPPERModel

Approx. price


Cutting width(inches)



Overall width

(inches)

Weight(pounds)


Mid or front

mount?Tire size

614/616 * Briggs & Stratton 14 or 16 hp 0 – 5.5 44 or 48 1 – 5 96 50.5 870-876 3 or 6 Front 18x9.5

618 * Kohler 18 hp 0 – 6.5 44, 48 or 52 1 – 5 98 54.5 1,003 4.3 Front 20x10218/220 * Kohler 18 or 20 hp 0-8.5 48 or 52 1 – 5 75 49.5-53.5 990-1,010 10 Mid 23x9.5 or 23x10.5718 * Briggs & Stratton 18 hp 0 – 8 48, 52 or 61 1 – 5 103.3 63.5 1,080 4.3 or 8.6 Front 20x10720 * Kohler 20 hp 0 – 8 48, 52, 61 or 72 1 – 5 103.3 73.5 1,085 4.3 or 8.6 Front 20x10721D * Kubota 20.9 hp diesel 0 – 8 48, 52, 61 or 72 1 – 5 103.3 73.5 1,190 4.3 or 8 Front 20x10721D2 * Kubota 20.9 hp diesel 0 – 9.2 48, 52, 61 or 72 1 – 5 103.3 73.5 1,280 4.3 or 8 Front 22x11321D * Kubota 20.9 hp diesel 0 – 10.5 61 or 72 1 – 5 81.5 73.5 1,220 10 Mid 24x12725G2 * Kubota 24.5 hp 0 – 10.5 48, 52, 61 or 72 1 – 5 103.3 73.5 1,280 4.3 or 8 Front 22x11725K2 * Kohler 25 hp 0 – 9.2 48, 52, 61 or 72 1 – 5 103.3 73.5 1,185 4.3 or 8 Front 22x11725KLP * Kohler 25 hp 0 – 8 48, 52, 61 or 72 1 – 5 103.3 73.5 1,160 4.3 gas or 7.9 LP Front 20x10225 * Kohler 25 hp 0 – 9.5 52 or 61 1 – 5 76.5 62.5 1,060 10 Mid 23x10.5325 * Kubota 24.5 hp 0 – 10.5 61 or 72 1 – 5 81.5 73.5 1,230 10 Mid 24x12727A * Kohler 27 hp 0 – 9.2 48, 52, 61 or 72 1 – 5 103.3 73.5 1,240 4.3 or 8 Front 22x11327A * Kohler 27 hp 0 – 10.5 61, 72 1 – 5 81.5 73.5 1,160 10 Mid 24.12928D * Kubota 28 hp diesel 0 – 10.5 52, 61, 0r 72 1 – 5 108 73.5 1,450 8 Front 22x11428D * Kubota 28 hp diesel 0 – 10.5 61 or 72 1 – 5 84.5 73.5 1,360 10 Mid 24x12932 * Kubota 32 hp 0 – 10.5 52, 61, 72 1 – 5 108 73.5 1,450 8 Front 22x11432 * Kubota 32 hp 0 – 10.5 61 or 72 1 – 5 84.5 73.5 1,360 10 Mid 24x12*Check with supplier for pricing.

Grasshopper’s True Zero Turn FrontMount and M1 mowers utilize a dual-lever steering design for precise control of steering and speed. The mowers come standard with an iso-mounted, coil-spring suspension seat and footrest.

EXMARK MFG. CO. INC.Model

Approx. price


Cutting width

(inches)




Weight(pounds)


Mid or front

mount?Tire size

Lazer Z HP44 * Kawasaki 17 or Kohler 20 hp 0 – 8.1 44 1.5 – 4.5 74.2 54.7 855 8.5 Mid 23x9.5-12

Lazer Z HP48 * Kohler 20 or Kawasaki 21 hp 0 – 8.1 48 1.5 – 4.5 74.2 58.1 900 8.5 Mid 23x9.5-12

Lazer Z HP52 * Kohler 20, 23 or Kawasaki 23 hp 0 – 9.5 52 1.5 – 4.5 75.5 63.2 973 8.5 Mid 23x9.5-12

Lazer Z * Kohler 20, 23 or 27 hp 0 – 10 52 or 72 1.5 – 5.0 78.5 64.2-72.2 1,026 – 1,126 11 Mid 23x9.5-12 or 24x12-12

Lazer Z EPS * Kohler 28 hp EFI 0 – 10 60 or 72 1.5 – 5.0 78.5-82.6 72.2-84.3 1,074 – 1,147 11 Mid 24x12-12

Lazer Z LiqCool * Kawasaki 27 hp 0 – 10 60 or 72 1.5 – 5.0 80.75-84.8 72.2-84.3 1,316 – 1,321 11 Mid 24x12-12

Lazer Z XP * Daihatsu 27 or 31 hp 0 – 11 60 or 72 1.5 – 5.0 82.2-86 72.2-84.3 1,545–1,568 11 Mid 24x12-12*Check with supplier for pricing. **With deflector down.

The Exmark Lazer Z is available with 52- and 60-inch Tri-Vantage and 72-inch UltraCut TriVantage full-floating decks. Cutting height can be adjusted the seated position and a deck-forward design offers superior visibility.

FERRISModel

Approx. price


Cutting width

(inches)



Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?Tire size

IS5000Z C31D W/5000/72 * Cat 31.5 hp 0 – 11 72 1.5 – 5.0 87 82, 77** 1,908 13 Mid 26x12-12

IS5000Z D34 W/5000/72 * Daihatsu 34 hp 0 – 11 72 1.5 – 5.0 87 82, 77** 1,750 13 Mid 26x12-12


IS4000Z KAV27 W/4000/61 * Kawasaki 27 hp LC 0 – 11 61 1.5 – 5.0 87 72, 67** 1,450 13 Mid 24x12-12

IS3000ZX * Kohler 27 hp 0 – 10 61 1.5 – 5.0 81 72, 67** 1,246 11 Mid 24x12-12

IS3000ZF KAV25/61 * Kawasaki 25 hp 0 – 10 61 1.5 – 5.0 81 72, 67** 1,223 11 Mid 23x10.5-12

IS1000Z KAV21/48 * Kawasaki 21 hp 0 – 10 48 1.5 – 5.0 76 61, 56** 1,102 8.5 Mid 23x9.5x12

IS1000Z KAV23/52 * Kawasaki 23 hp 0 – 10 52 1.5 – 5.0 76 57, 52** 1,034 8.5 Mid 23x9.5-12

1000Z KAV21/48 * Kawasaki 21 hp 0 – 10 48 1.5 – 4.5 75 72, 67** 1,122 8.5 Mid 23x9.5-12

1000Z KAV23/52 * Kawasaki 23 hp 0 – 10 52 1.5 – 4.5 75 61, 56** 970 8.5 Mid 23x9.5-12

1000Z KAV23/61 Kawasaki 23 hp 0 – 10 61 1.5 – 4.5 75 57, 52** 950 8.5 Mid 23x9.5-12*Check with supplier for pricing. **With deflector up.

Ferris Industries introduces a complete new line of mid-mount Z’s from 48 to 72 inches: the 1000 Z (48 or 52 inches), the IS 3000 Z (61 inches) and the IS 4000 Z (61 or 72 inches). All three mowers sport a new look designed to complement Ferris’ signature design.








GRASSHOPPERModel

Approx. price





Overall width

(inches)

Weight(pounds)


Mid or front

mount?Tire size

614/616 * Briggs & Stratton 14 or 16 hp 0 – 5.5 44 or 48 1 – 5 96 50.5 870-876 3 or 6 Front 18x9.5

618 * Kohler 18 hp 0 – 6.5 44, 48 or 52 1 – 5 98 54.5 1,003 4.3 Front 20x10218/220 * Kohler 18 or 20 hp 0-8.5 48 or 52 1 – 5 75 49.5-53.5 990-1,010 10 Mid 23x9.5 or 23x10.5718 * Briggs & Stratton 18 hp 0 – 8 48, 52 or 61 1 – 5 103.3 63.5 1,080 4.3 or 8.6 Front 20x10720 * Kohler 20 hp 0 – 8 48, 52, 61 or 72 1 – 5 103.3 73.5 1,085 4.3 or 8.6 Front 20x10721D * Kubota 20.9 hp diesel 0 – 8 48, 52, 61 or 72 1 – 5 103.3 73.5 1,190 4.3 or 8 Front 20x10721D2 * Kubota 20.9 hp diesel 0 – 9.2 48, 52, 61 or 72 1 – 5 103.3 73.5 1,280 4.3 or 8 Front 22x11321D * Kubota 20.9 hp diesel 0 – 10.5 61 or 72 1 – 5 81.5 73.5 1,220 10 Mid 24x12725G2 * Kubota 24.5 hp 0 – 10.5 48, 52, 61 or 72 1 – 5 103.3 73.5 1,280 4.3 or 8 Front 22x11725K2 * Kohler 25 hp 0 – 9.2 48, 52, 61 or 72 1 – 5 103.3 73.5 1,185 4.3 or 8 Front 22x11725KLP * Kohler 25 hp 0 – 8 48, 52, 61 or 72 1 – 5 103.3 73.5 1,160 4.3 gas or 7.9 LP Front 20x10225 * Kohler 25 hp 0 – 9.5 52 or 61 1 – 5 76.5 62.5 1,060 10 Mid 23x10.5325 * Kubota 24.5 hp 0 – 10.5 61 or 72 1 – 5 81.5 73.5 1,230 10 Mid 24x12727A * Kohler 27 hp 0 – 9.2 48, 52, 61 or 72 1 – 5 103.3 73.5 1,240 4.3 or 8 Front 22x11327A * Kohler 27 hp 0 – 10.5 61, 72 1 – 5 81.5 73.5 1,160 10 Mid 24.12928D * Kubota 28 hp diesel 0 – 10.5 52, 61, 0r 72 1 – 5 108 73.5 1,450 8 Front 22x11428D * Kubota 28 hp diesel 0 – 10.5 61 or 72 1 – 5 84.5 73.5 1,360 10 Mid 24x12932 * Kubota 32 hp 0 – 10.5 52, 61, 72 1 – 5 108 73.5 1,450 8 Front 22x11432 * Kubota 32 hp 0 – 10.5 61 or 72 1 – 5 84.5 73.5 1,360 10 Mid 24x12*Check with supplier for pricing.

Grasshopper’s True Zero Turn FrontMount and M1 mowers utilize a dual-lever steering design for precise control of steering and speed. The mowers come standard with an iso-mounted, coil-spring suspension seat and footrest.

EXMARK MFG. CO. INC.Model

Approx. price


Cutting width

(inches)




Weight(pounds)


Mid or front

mount?Tire size

Lazer Z HP44 * Kawasaki 17 or Kohler 20 hp 0 – 8.1 44 1.5 – 4.5 74.2 54.7 855 8.5 Mid 23x9.5-12

Lazer Z HP48 * Kohler 20 or Kawasaki 21 hp 0 – 8.1 48 1.5 – 4.5 74.2 58.1 900 8.5 Mid 23x9.5-12

Lazer Z HP52 * Kohler 20, 23 or Kawasaki 23 hp 0 – 9.5 52 1.5 – 4.5 75.5 63.2 973 8.5 Mid 23x9.5-12

Lazer Z * Kohler 20, 23 or 27 hp 0 – 10 52 or 72 1.5 – 5.0 78.5 64.2-72.2 1,026 – 1,126 11 Mid 23x9.5-12 or 24x12-12

Lazer Z EPS * Kohler 28 hp EFI 0 – 10 60 or 72 1.5 – 5.0 78.5-82.6 72.2-84.3 1,074 – 1,147 11 Mid 24x12-12

Lazer Z LiqCool * Kawasaki 27 hp 0 – 10 60 or 72 1.5 – 5.0 80.75-84.8 72.2-84.3 1,316 – 1,321 11 Mid 24x12-12

Lazer Z XP * Daihatsu 27 or 31 hp 0 – 11 60 or 72 1.5 – 5.0 82.2-86 72.2-84.3 1,545–1,568 11 Mid 24x12-12*Check with supplier for pricing. **With deflector down.

The Exmark Lazer Z is available with 52- and 60-inch Tri-Vantage and 72-inch UltraCut TriVantage full-floating decks. Cutting height can be adjusted the seated position and a deck-forward design offers superior visibility.

FERRISModel

Approx. price


Cutting width

(inches)



Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?Tire size

IS5000Z C31D W/5000/72 * Cat 31.5 hp 0 – 11 72 1.5 – 5.0 87 82, 77** 1,908 13 Mid 26x12-12



IS4000Z KAV27 W/4000/61 * Kawasaki 27 hp LC 0 – 11 61 1.5 – 5.0 87 72, 67** 1,450 13 Mid 24x12-12

IS3000ZX * Kohler 27 hp 0 – 10 61 1.5 – 5.0 81 72, 67** 1,246 11 Mid 24x12-12

IS3000ZF KAV25/61 * Kawasaki 25 hp 0 – 10 61 1.5 – 5.0 81 72, 67** 1,223 11 Mid 23x10.5-12

IS1000Z KAV21/48 * Kawasaki 21 hp 0 – 10 48 1.5 – 5.0 76 61, 56** 1,102 8.5 Mid 23x9.5x12

IS1000Z KAV23/52 * Kawasaki 23 hp 0 – 10 52 1.5 – 5.0 76 57, 52** 1,034 8.5 Mid 23x9.5-12

1000Z KAV21/48 * Kawasaki 21 hp 0 – 10 48 1.5 – 4.5 75 72, 67** 1,122 8.5 Mid 23x9.5-12

1000Z KAV23/52 * Kawasaki 23 hp 0 – 10 52 1.5 – 4.5 75 61, 56** 970 8.5 Mid 23x9.5-12

1000Z KAV23/61 Kawasaki 23 hp 0 – 10 61 1.5 – 4.5 75 57, 52** 950 8.5 Mid 23x9.5-12*Check with supplier for pricing. **With deflector up.

Ferris Industries introduces a complete new line of mid-mount Z’s from 48 to 72 inches: the 1000 Z (48 or 52 inches), the IS 3000 Z (61 inches) and the IS 4000 Z (61 or 72 inches). All three mowers sport a new look designed to complement Ferris’ signature design.





GRAVELYModel

Approx. price


Cutting width

(inches)


Overall length

(inches)

Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?Tire size

992042 * Kawasaki 19 hp 0 – 10 44 1 – 5 72.5 57 946 10 Mid 23x9.5x12


992044 * Kawasaki 23 0 – 10 52 1 – 5 72.5 65 961 10 Mid 23x10.5x12

992054 * Kohler 25 hp 0 – 10 52 1 – 5 72.5 65 961 10 Mid 23x10.5x12

992051 * Kawasaki 23 hp 0 – 10 60 1 – 5 75 73 1,040 10 Mid 23x10.5x12

992055 * Kohler 25 hp 0 – 10 60 1 – 5 75 73 1,040 10 Mid 23x10.5-12

992045 * Kawasaki 25 hp 0 – 13 52 1 – 5 79.8 66.5 1,050 14 Mid 24x12-12

992052 * Kohler 27 hp 0 – 13 52 1 – 5 79.8 66.5 1,050 14 Mid 24x12-12

992046 * Kawasaki 25 hp 0 – 13 60 1 – 5 79.8 75 1,125 14 Mid 24x12-12

992047 * Kohler 27 hp 0 – 13 60 1 – 5 79.8 75 1,125 14 Mid 24x12-12

992048 * Kohler 28 hp 0 – 13 60 1 – 5 79.8 75 1,125 14 Mid 24x12-12

992036 * Kawasaki 27 hp 0 – 13 60 1 – 5 81.75 75 1,200 14 Mid 24x12-12

992038 * Daihatsu 31 hp 0 – 13 60 1 – 5 81.75 75 1,200 14 Mid 24x12-12

992049 * Kawasaki 25 hp 0 – 13 72 1 – 5 83 84.5 1,175 14 Mid 24x12-12

992055 * Kohler 27 hp 0 – 13 72 1 – 5 83 84.5 1,175 14 Mid 24x12-12

992037 * Kawasaki 27 hp 0 – 13 72 1 – 5 81.75 84.5 1,250 14 Mid 24x12-12

992039 * Daihatsu 31 hp 0 – 13 72 1 – 5 81.75 84.5 1,250 14 Mid 24x12-12

990018 * Kohler 27 hp 0 – 9.5 50, 60 or 72 1 – 5 69 75 1,190 7.5 Front 23x10.5-12

992020 * Kawasaki 25 hp 0 – 9.5 50, 60 or 72 1 – 5 69 75 1,190 7.5 Front 23x10.5-12*Check with supplier for pricing.

Gravely introduces its new line of intermediate zero-turn mowers. The mowers come with Kawasaki or Kohler engine choices ranging from 19 to 25 hp. Deck options include 44-, 48-, 52- or 60-inch cutting widths. Features include a hydraulic deck height control to effortlessly change deck height, shorter frame to fit easier on trailers and monster tires in back and front. In addition, the new intermediate zero-turn mowers operate at speeds of up to 10 mph forward, have a 10-gallon fuel tank, and the Gravely Air-Flo deck design provides maximum airflow to expel clippings faster.

GREAT DANE Model

Approx. price


Cutting width

(inches)



Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?Tire size

Chariot 48 * Kawasaki 17 or 19 hp 0 – 10 48 1 – 5 78 59 1,055 8 Mid 23x9.5x12


Chariot 61 * Kawasaki 25 hp or Kohler 25 hp 0 – 10 61 1 – 5 78 73.375 1,104 8 Mid 23x9.5x12

Chariot LX 61 * Kawasaki 25 hp or Kohler 25, 26, 27 or 28 hp 0 – 10 61 1 – 5 78.75 73.375 1,179 8 Mid 24x12x12

Chariot LX 72 * Kohler 27 or Kohler 28 hp EFI 0 – 10 72 1 – 5 81 84.375 1,230 8 Mid 24x12x12*Check with supplier for pricing.

Great Dane introduces the 2003 Chariot and Chariot LX. Newly refined and equipped with high capacity 7-gauge fabricated steel decks, operators can choose hand controls for either twin-centered or the traditional wrap-around style. A hand lever makes cutting height adjustments easy.

H.E.L.K. INC.Model

Approx. price

EngineSpeed range

(mph)

Cutting width

(inches)


Overall length

(inches)

Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?

Tire size

91551 $19,000 Kubota 37 hp diesel 0 – 10 91 1.5 – 5 89 91 1800 * Front 23


55004 $15,500 Kubota 37 hp diesel 0 – 10 55 1.5 – 5 89 55 1600 * Front 23*Not available.








GRAVELYModel

Approx. price


Cutting width

(inches)


Overall length

(inches)

Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?Tire size



992044 * Kawasaki 23 0 – 10 52 1 – 5 72.5 65 961 10 Mid 23x10.5x12

992054 * Kohler 25 hp 0 – 10 52 1 – 5 72.5 65 961 10 Mid 23x10.5x12

992051 * Kawasaki 23 hp 0 – 10 60 1 – 5 75 73 1,040 10 Mid 23x10.5x12

992055 * Kohler 25 hp 0 – 10 60 1 – 5 75 73 1,040 10 Mid 23x10.5-12

992045 * Kawasaki 25 hp 0 – 13 52 1 – 5 79.8 66.5 1,050 14 Mid 24x12-12

992052 * Kohler 27 hp 0 – 13 52 1 – 5 79.8 66.5 1,050 14 Mid 24x12-12

992046 * Kawasaki 25 hp 0 – 13 60 1 – 5 79.8 75 1,125 14 Mid 24x12-12

992047 * Kohler 27 hp 0 – 13 60 1 – 5 79.8 75 1,125 14 Mid 24x12-12

992048 * Kohler 28 hp 0 – 13 60 1 – 5 79.8 75 1,125 14 Mid 24x12-12

992036 * Kawasaki 27 hp 0 – 13 60 1 – 5 81.75 75 1,200 14 Mid 24x12-12

992038 * Daihatsu 31 hp 0 – 13 60 1 – 5 81.75 75 1,200 14 Mid 24x12-12

992049 * Kawasaki 25 hp 0 – 13 72 1 – 5 83 84.5 1,175 14 Mid 24x12-12

992055 * Kohler 27 hp 0 – 13 72 1 – 5 83 84.5 1,175 14 Mid 24x12-12

992037 * Kawasaki 27 hp 0 – 13 72 1 – 5 81.75 84.5 1,250 14 Mid 24x12-12

992039 * Daihatsu 31 hp 0 – 13 72 1 – 5 81.75 84.5 1,250 14 Mid 24x12-12

990018 * Kohler 27 hp 0 – 9.5 50, 60 or 72 1 – 5 69 75 1,190 7.5 Front 23x10.5-12

992020 * Kawasaki 25 hp 0 – 9.5 50, 60 or 72 1 – 5 69 75 1,190 7.5 Front 23x10.5-12*Check with supplier for pricing.

Gravely introduces its new line of intermediate zero-turn mowers. The mowers come with Kawasaki or Kohler engine choices ranging from 19 to 25 hp. Deck options include 44-, 48-, 52- or 60-inch cutting widths. Features include a hydraulic deck height control to effortlessly change deck height, shorter frame to fit easier on trailers and monster tires in back and front. In addition, the new intermediate zero-turn mowers operate at speeds of up to 10 mph forward, have a 10-gallon fuel tank, and the Gravely Air-Flo deck design provides maximum airflow to expel clippings faster.

GREAT DANE Model

Approx. price


Cutting width

(inches)



Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?Tire size



Chariot 61 * Kawasaki 25 hp or Kohler 25 hp 0 – 10 61 1 – 5 78 73.375 1,104 8 Mid 23x9.5x12

Chariot LX 61 * Kawasaki 25 hp or Kohler 25, 26, 27 or 28 hp 0 – 10 61 1 – 5 78.75 73.375 1,179 8 Mid 24x12x12

Chariot LX 72 * Kohler 27 or Kohler 28 hp EFI 0 – 10 72 1 – 5 81 84.375 1,230 8 Mid 24x12x12*Check with supplier for pricing.

Great Dane introduces the 2003 Chariot and Chariot LX. Newly refined and equipped with high capacity 7-gauge fabricated steel decks, operators can choose hand controls for either twin-centered or the traditional wrap-around style. A hand lever makes cutting height adjustments easy.

H.E.L.K. INC.Model

Approx. price

EngineSpeed range

(mph)

Cutting width

(inches)


Overall length

(inches)

Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?

Tire size



55004 $15,500 Kubota 37 hp diesel 0 – 10 55 1.5 – 5 89 55 1600 * Front 23*Not available.





HOWARD PRICE TURF EQUIPMENT

ModelApprox.

priceEngine

Speed range

(inches)

Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front

mount?Tire size

360Z-25 * Kohler 25 hp/ Kawasaki 25 hp 0 – 9 60 & 80 1 – 5 79 74 960 12.5 Mid 24x12

360Z-23 * Kawasaki 23 hp 0 – 9 52 & 60 1 – 5 79 74 960 12.5 Mid 24x12

360Z-24 * Honda 24 hp 0 – 9 60 & 80 1 – 5 79 94.25 1,328 12.5 Mid 24x12

360Z-27 * Kawasaki 27 hp 0 – 9 52 & 60 1 – 5 79 74 960 12.5 Mid 24x12

360Z-29 * Kawasaki 29 hp 0 – 9 60 & 80 1 – 5 79 94.25 1,328 12.5 Mid 24x12*Check with supplier for pricing.

HUSQVARNAModel

Approx. price


Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front

mount?Tire size

ZTH4218 $4,999 Kawasaki 18 hp 0 – 8 42 1.5 – 5 71.25 49 – 59 770 11.4 Mid 20x10

ZTH4218QL $5,699 Kawasaki 18 hp 0 – 8 42 1.5 – 5 71.25 49 – 59 770 11.4 Mid 20x10

ZTH5225XPQL $7,999 Kohler 25 hp 0 – 10 52 1.5 – 6 82 53 – 63 1,060 11.4 Mid 24x12

ZTH6123XPQL $7,999 Kawasaki 23 hp 0 – 10 61 1.5 – 6 82 62 – 72 1,090 11.4 Mid 24x12

ZTH6123LXPQL $8,399 Kohler 23 hp 0 – 10 61 1.5 – 6 82 62 – 72 1,090 11.4 Mid 24x12

ZTH6125XPQL $8,299 & $8,399

Kohler 25 hp/Kawasaki 25 hp 0 – 10 61 1.5 – 6 82 62 – 72 1,090 11.4 Mid 24x12





BZ6127D $12,499 Daihatsu 27 hp 0 – 11.5 61 1.5 – 6 95 62 – 74 1,540 11.4 Mid 26x12

BZ6134D $14,699 Daihatsu 34-hp 0 – 11.5 61 1.5 – 6 95 73 – 85 1,580 11.4 Mid 26x12


iZ4218 $5,999 Kawasaki 18 hp 0 – 9.5 42 1.5 – 5 73 43 – 55 840 11.4 Mid 23x8.5

iZ4818 $6,599 Kawasaki 0 – 9.5 48 1.5 – 5 76.5 49 – 61 870 11.4 Mid 23x10.5

iZ4821 $7,099 Kawasaki 21 hp 0 – 9.5 48 1.5 – 5 76.5 49 – 61 870 11.4 Mid 23x10.5


iZ5223 $7,599 Kohler 23 hp 0 – 9.5 52 1.5 – 5 76.5 53 – 65 880 11.4 Mid 23x10.5

Husqvarna’s BZ7234D features a 72-inch cutting width and adjustable cutting heights from 1.5 to 6 inches in 1/4-inch incre-ments. This broad-area mower boasts a hydraulic powered deck lift and full suspension seat, 21-cc pumps and 22-cubic-inch wheel motors with integrated brakes and the advanced cutting system deck that provides a quality cut even in the most demanding conditions.



Inclusion in the Zero-Turn Mower Spec Guide does not imply endorsement on the part of the publisher. Neither does omission imply criticism.





HUSQVARNAModel

Approx. price


Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front

mount?Tire size

ZTH4218 $4,999 Kawasaki 18 hp 0 – 8 42 1.5 – 5 71.25 49 – 59 770 11.4 Mid 20x10

ZTH4218QL $5,699 Kawasaki 18 hp 0 – 8 42 1.5 – 5 71.25 49 – 59 770 11.4 Mid 20x10


ZTH6123XPQL $7,999 Kawasaki 23 hp 0 – 10 61 1.5 – 6 82 62 – 72 1,090 11.4 Mid 24x12

ZTH6123LXPQL $8,399 Kohler 23 hp 0 – 10 61 1.5 – 6 82 62 – 72 1,090 11.4 Mid 24x12

ZTH6125XPQL $8,299 & $8,399

Kohler 25 hp/Kawasaki 25 hp 0 – 10 61 1.5 – 6 82 62 – 72 1,090 11.4 Mid 24x12





BZ6127D $12,499 Daihatsu 27 hp 0 – 11.5 61 1.5 – 6 95 62 – 74 1,540 11.4 Mid 26x12



iZ4218 $5,999 Kawasaki 18 hp 0 – 9.5 42 1.5 – 5 73 43 – 55 840 11.4 Mid 23x8.5

iZ4818 $6,599 Kawasaki 0 – 9.5 48 1.5 – 5 76.5 49 – 61 870 11.4 Mid 23x10.5



iZ5223 $7,599 Kohler 23 hp 0 – 9.5 52 1.5 – 5 76.5 53 – 65 880 11.4 Mid 23x10.5

Husqvarna’s BZ7234D features a 72-inch cutting width and adjustable cutting heights from 1.5 to 6 inches in 1/4-inch incre-ments. This broad-area mower boasts a hydraulic powered deck lift and full suspension seat, 21-cc pumps and 22-cubic-inch wheel motors with integrated brakes and the advanced cutting system deck that provides a quality cut even in the most demanding conditions.





HUSTLERModel

Approx. price

Engine optionsSpeed range (mph)

Cutting*** width

(inches)



Overallwidth***(inches)

Weight(pounds)


Mid or front

mount?Tire size

Hydro WalkBehind $5,075 Kawasaki 15 hp 0 – 7 37 1 – 4 84 37.7 600 ** Front 18x8






Super WalkBehind $6295 Kawasaki 23 hp 0 – 7 48 1 – 4 77 49.5 675 ** Front 20x10

Super WalkBehind $6,495 Kawasaki 25 hp 0 – 7 54 1 – 4 79 55.6 675 ** Front 20x10

Hustler Mini Z $7,195 Kawasaki 19 hp 0 – 9 44 1.5 – 4.5 72 49 1,100 ** Mid 20x10



Super Mini Z $7,795 Kawasaki 19 hp 0 – 13 44 1.5 – 4.5 66 49 1,200 ** Mid 20x10


Super Mini Z $8,495 Honda 24 hp 0 – 13 52 1.5 – 4.5 70 57 1,350 ** Mid 20x10


Hustler Z $8,395 Kawasaki 23 hp 0 – 9 52 1 – 5 66 53 1,200 ** Mid 23x9.5

Hustler Z $8,495 Kawasaki 23 hp 0 – 9 60 1 – 5 66 53 1,200 ** Mid 24x12

Hustler Z $8,695 Honda 24 hp 0 – 9 60 1 – 5 66 53 1,200 ** Mid 24x12


Hustler Z $9,345 Kohler 27 hp 0 – 9 60 1 – 5 66 53 1,300 ** Mid 24x12


Hustler Super Z $9,295 Honda 24 0 – 15 52 1 – 5 72 53 1,100 ** Mid 23x9.5

Hustler Super Z $9,395 Kawasaki 25 hp 0 – 15 52 1 – 5 72 53 1,100 ** Mid 23x9.5

Hustler Super Z $9,395 Honda 24 hp 0 – 15 60 1 – 5 75 61 1,220 ** Mid 24x12

Hustler Super Z $9,495 Kawasaki 25 hp 0 – 15 60 1 – 5 75 61 1,220 ** Mid 24x12

Hustler Super Z $9,595 Kohler 27 hp 0 – 15 60 1 – 5 75 61 1,220 ** Mid 24x12




3400 Z (T or H) * Kubota 28 hp 0 – 9 60 or 72 1 – 5 93 51 1,415 ** Front 23x10.5

3400 AWD * Kubota 28 hp 0 – 9 60 or 72 1 – 5 93 51 1,415 ** Front 23x10.5

4600/4500 * Kubota 38 or Ford 54 hp 0 – 10 60 or 72 1 – 5 100 51 1,520 ** Front 23x10.5

4600/4500 Range Wing * Kubota 38 or Ford 54 hp 0 – 10 146 1 – 4 139 51 2,700 ** Front 23x10.5

6400 Hillsider * Kubota 38 hp 0 – 9 72 1 – 4 139 57 2,175 ** Front 23x10.5*Check with supplier for pricing.**Not available. ***Not including wing decks.

New for 2003, Hustler Turf Equipment introduces a 27-hp Kohler engine in the Hustler Z and Super Z. Features include lifetime warranty on the tractor frame and leading edge of deck; stainless-steel, high-pressure hydraulic lines with Parker Seal-Lok O-ring face seal fittings; heavy-duty air cleaner; twin-lever steering with patented automatic park brake system; 52-, 60- or 72-inch side-discharge/mulching decks; simple, foot-operated deck-lift system and more.

INGERSOLLModel

Approx. price


Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front mount?

Tire size

G1897V $6,699 Briggs & Stratton 18 hp 0 – 7 52 1.5 – 5 69 49 635 5 Front **


G2297K $7,499 Kohler 22 hp 0 – 7 72 1.5 – 5 69 49 660 5 Front ***Not including decks (which are interchangeable). **Not available.

Grazer, a division of Ingersoll Equipment Co., Inc. offers mowers available in 18- to 22-hp models for commercial cutters. The 52-, 62- and 72-inch side-discharge decks are fully floating with a tilt-back feature for easy service, and can be converted to mulching decks with the addition of a kit. Additional attachments include a grass collector, snow blower, cab and a roll-over protection system.







HUSTLERModel

Approx. price


Cutting*** width

(inches)



Overallwidth***(inches)

Weight(pounds)


Mid or front

mount?Tire size







Super WalkBehind $6295 Kawasaki 23 hp 0 – 7 48 1 – 4 77 49.5 675 ** Front 20x10

Super WalkBehind $6,495 Kawasaki 25 hp 0 – 7 54 1 – 4 79 55.6 675 ** Front 20x10






Super Mini Z $8,495 Honda 24 hp 0 – 13 52 1.5 – 4.5 70 57 1,350 ** Mid 20x10


Hustler Z $8,395 Kawasaki 23 hp 0 – 9 52 1 – 5 66 53 1,200 ** Mid 23x9.5


Hustler Z $8,695 Honda 24 hp 0 – 9 60 1 – 5 66 53 1,200 ** Mid 24x12


Hustler Z $9,345 Kohler 27 hp 0 – 9 60 1 – 5 66 53 1,300 ** Mid 24x12


Hustler Super Z $9,295 Honda 24 0 – 15 52 1 – 5 72 53 1,100 ** Mid 23x9.5

Hustler Super Z $9,395 Kawasaki 25 hp 0 – 15 52 1 – 5 72 53 1,100 ** Mid 23x9.5







3400 Z (T or H) * Kubota 28 hp 0 – 9 60 or 72 1 – 5 93 51 1,415 ** Front 23x10.5

3400 AWD * Kubota 28 hp 0 – 9 60 or 72 1 – 5 93 51 1,415 ** Front 23x10.5

4600/4500 * Kubota 38 or Ford 54 hp 0 – 10 60 or 72 1 – 5 100 51 1,520 ** Front 23x10.5

4600/4500 Range Wing * Kubota 38 or Ford 54 hp 0 – 10 146 1 – 4 139 51 2,700 ** Front 23x10.5

6400 Hillsider * Kubota 38 hp 0 – 9 72 1 – 4 139 57 2,175 ** Front 23x10.5*Check with supplier for pricing.**Not available. ***Not including wing decks.

New for 2003, Hustler Turf Equipment introduces a 27-hp Kohler engine in the Hustler Z and Super Z. Features include lifetime warranty on the tractor frame and leading edge of deck; stainless-steel, high-pressure hydraulic lines with Parker Seal-Lok O-ring face seal fittings; heavy-duty air cleaner; twin-lever steering with patented automatic park brake system; 52-, 60- or 72-inch side-discharge/mulching decks; simple, foot-operated deck-lift system and more.

INGERSOLLModel

Approx. price


Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front mount?

Tire size



G2297K $7,499 Kohler 22 hp 0 – 7 72 1.5 – 5 69 49 660 5 Front ***Not including decks (which are interchangeable). **Not available.

Grazer, a division of Ingersoll Equipment Co., Inc. offers mowers available in 18- to 22-hp models for commercial cutters. The 52-, 62- and 72-inch side-discharge decks are fully floating with a tilt-back feature for easy service, and can be converted to mulching decks with the addition of a kit. Additional attachments include a grass collector, snow blower, cab and a roll-over protection system.





JACOBSENModel

Approx. price


Cutting width

(inches)


Overall length

(inches)

Overall width (inches)

Weight (pounds)


Mid or front

mount?Tire size

JZT 1250 * Kohler 25 hp 0 – 6 42 or 48 1.5 – 4.5 93.5 50 ** 5.3 Mid 18x10.50-10

JZT 2180 ES * Briggs & Stratton 0 – 8 52 1.5 – 4.5 80.5 58.25 to 64.5 ** 12 Mid 23x8.50-12

JZT 2190 * Kawasaki 19 hp 0 – 8 52 1.5 – 4.5 80 54 to 59 ** 12 Mid 23x8.50-12

JZT 2230 * Kawasaki 23 hp 0 – 8 52 or 61 1.5 – 4.5 80 58.25 to 73 ** 12 Mid 23x10.50-12

JZT 2250 * Kawasaki 25 hp 0 – 8 61 1.5 – 4.5 80 62 to 73 ** 12 Mid 24x12-12

JZT 2230 LC * Kohler 23 hp 0 – 8 52 or 61 1.5 – 4.5 80 62 to 73 ** 12 Mid 23x10.50-12 or 24x12-12*Check with supplier for pricing **Not available.

The Jacobsen JZT-2000 series features a wide choice of engine options (19- to 25-hp, liquid- or air-cooled) and deck sizes (48 to 72 inches). Each model comes standard with ergonomically designed operator controls that boost productivity, reduce operator fatigue and safely achieve mowing results. The fully floating, suspended deck design features a heavy-duty, welded 10-gauge steel deck and 7-gauge steel skirts that deliver quality cut without scalping.

JOHN DEERE WORLDWIDE COMMERCIAL AND CONSUMER EQUIPMENT DIVISION

ModelApprox.

priceEngine

Speed range (mph)

Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front mount?

Tire size

F687 $9,149 Kohler 23 hp 0 – 8.2 48, 54, 60 1 – 5 102.4 73.8 1,070 6.8 Front 20x10

647 $6,799 Kawasaki 19 hp 0 – 8 48 1 – 5 64 62 775 6 Mid 20x8

657 $7,449 Kawasaki 23 hp 0 – 8 54 1 – 5 66 68 805 6 Mid 20x10

667 $7,699 Kawasaki 23 hp 0 – 8 60 1 – 5 68 74 825 6 Mid 20x10

717 $7,399 Kawasaki 19 hp 0 – 9 48 1 – 5 75 62 1,040 8 Mid 23x9.5

727 $8,099 Kawasaki 23 hp 0 – 9 54 1 – 5 75 68 1,090 8 Mid 23x9.5

737 $8,599 Kawasaki 23 hp 0 – 10 54, 60 1 – 5 79 68 1,110 9.5 Mid 24x12

757 $9,449 Kawasaki 25 hp 0 – 10 54, 60 1 – 5 79 74 1,130 9.5 Mid 24x12

777 $10,699 Kawasaki 0 – 10 60 or 72 1 – 5 89 86 1,290 12 Mid 24x12

797 $12,499 Kawasaki 0 – 10 60 or 72 1 – 5 95 86 1,290 12 Mid 24x12

Professional landscape contractors in need of a mid-mount mower with added power and wider deck options can look to the John Deere 777 and 797 Max-Frame Z-Trak mowers. The machines combine high horsepower, larger deck options and zero-turn-radius technology, offering operators power, traction, maneuverability and productivity for various applications.

KUBOTA TRACTOR CORP.Model

Approx. price


Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front mount?

Tire size

ZD18 $9,900 Kubota 18 hp diesel 0 – 9.1 54 or 60 1 – 5 80.3 65.5 1,168 8 Mid 23x10.5

ZD21 $10,600 Kubota 21 hp diesel 0 – 9.4 60 1 – 5 80.3 74 1,212 8 Mid 24x12.0


ZD21 Pro $11,280 Kubota 21 hp 0 – 9.4 60 1 – 5 80.3 57.1 1,212 8 Mid 24x12

ZD28 Pro $12,680 Kubota 28 hp 0 – 9.3 60 or 72 1 – 5 88.8 72 1,627 8 Mid 24x12

Kubota Tractor Corp. introduces an all-new fabricated ZD-Pro deck designed especially for the commercial cutter and landscape maintenance contractor. Matched with the ZD21 and ZD28 zero turn mowers, the 7-gauge steel deck offers cutting performance in all grass varieties and conditions. The shaft-driven, low-noise deck is available in a 60 or 72-inch cutting width.

LAND PRIDEModel

Approx. price


Cutting width

(inches)


Overall length

(inches)

Overall width

Weight (pounds)


Mid or front mount?

Tire size

LPZ52 $9,099 Kawasaki 23 hp 0 – 11 52 1 – 5 76 65 1,065 12 Mid 23x9.5-12

LPZ60 $9,499 Kawasaki 23 hp 0 – 11 60 1 – 5 76 75 1,100 12 Mid 24x12-12

LPZ72 $10,499 Kawasaki 25 hp 0 – 11 72 1 – 5 76 82.5 1,230 12 Mid 24x12-12

ZR44 $5,749 Honda 16 or 18 hp 0 – 7 44 1.5 – 4.5 68 49.2 740 12 Mid 18x8.5-8

ZR52 $6,049 Honda 18 or 20 hp 0 – 7 52 1.5 – 4.5 69.6 57.2 755 12 Mid 18x9.5-8

ZRP44 $8,199 Honda 19 hp 0 – 9 44 1.5 – 4.5 72 45 985 12.2 Mid 20x10-10

ZRP52 $8,499 Kawasaki 23 hp 0 – 9 52 1.5 – 4.5 72 53 985 12.2 Mid 20x10-10

Land Pride’s Accu-Z mid-mount mower offers large-capacity fuel tanks, choice of seats, adjustable steering control, turf-type drive tires and a fuel-efficient twin cylinder gas engine. The new Razor Pro series incorporates the convenience of 44- or 52-inch deck sizes with commercial features such as a twin cylinder gasoline powered engine, 11-gauge deck reinforced with 11-gauge double plate and heavy-duty push arms on the mower deck. The new 44- and 52-inch Razor Z are suitable for those small-to-medium residential areas.









JACOBSENModel

Approx. price


Cutting width

(inches)


Overall length

(inches)

Overall width (inches)

Weight (pounds)


Mid or front

mount?Tire size

JZT 1250 * Kohler 25 hp 0 – 6 42 or 48 1.5 – 4.5 93.5 50 ** 5.3 Mid 18x10.50-10

JZT 2180 ES * Briggs & Stratton 0 – 8 52 1.5 – 4.5 80.5 58.25 to 64.5 ** 12 Mid 23x8.50-12

JZT 2190 * Kawasaki 19 hp 0 – 8 52 1.5 – 4.5 80 54 to 59 ** 12 Mid 23x8.50-12

JZT 2230 * Kawasaki 23 hp 0 – 8 52 or 61 1.5 – 4.5 80 58.25 to 73 ** 12 Mid 23x10.50-12

JZT 2250 * Kawasaki 25 hp 0 – 8 61 1.5 – 4.5 80 62 to 73 ** 12 Mid 24x12-12

JZT 2230 LC * Kohler 23 hp 0 – 8 52 or 61 1.5 – 4.5 80 62 to 73 ** 12 Mid 23x10.50-12 or 24x12-12*Check with supplier for pricing **Not available.

The Jacobsen JZT-2000 series features a wide choice of engine options (19- to 25-hp, liquid- or air-cooled) and deck sizes (48 to 72 inches). Each model comes standard with ergonomically designed operator controls that boost productivity, reduce operator fatigue and safely achieve mowing results. The fully floating, suspended deck design features a heavy-duty, welded 10-gauge steel deck and 7-gauge steel skirts that deliver quality cut without scalping.

JOHN DEERE WORLDWIDE COMMERCIAL AND CONSUMER EQUIPMENT DIVISION

ModelApprox.

priceEngine

Speed range (mph)

Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front mount?

Tire size

F687 $9,149 Kohler 23 hp 0 – 8.2 48, 54, 60 1 – 5 102.4 73.8 1,070 6.8 Front 20x10

647 $6,799 Kawasaki 19 hp 0 – 8 48 1 – 5 64 62 775 6 Mid 20x8

657 $7,449 Kawasaki 23 hp 0 – 8 54 1 – 5 66 68 805 6 Mid 20x10

667 $7,699 Kawasaki 23 hp 0 – 8 60 1 – 5 68 74 825 6 Mid 20x10

717 $7,399 Kawasaki 19 hp 0 – 9 48 1 – 5 75 62 1,040 8 Mid 23x9.5

727 $8,099 Kawasaki 23 hp 0 – 9 54 1 – 5 75 68 1,090 8 Mid 23x9.5

737 $8,599 Kawasaki 23 hp 0 – 10 54, 60 1 – 5 79 68 1,110 9.5 Mid 24x12

757 $9,449 Kawasaki 25 hp 0 – 10 54, 60 1 – 5 79 74 1,130 9.5 Mid 24x12

777 $10,699 Kawasaki 0 – 10 60 or 72 1 – 5 89 86 1,290 12 Mid 24x12

797 $12,499 Kawasaki 0 – 10 60 or 72 1 – 5 95 86 1,290 12 Mid 24x12

Professional landscape contractors in need of a mid-mount mower with added power and wider deck options can look to the John Deere 777 and 797 Max-Frame Z-Trak mowers. The machines combine high horsepower, larger deck options and zero-turn-radius technology, offering operators power, traction, maneuverability and productivity for various applications.

KUBOTA TRACTOR CORP.Model

Approx. price


Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front mount?

Tire size

ZD18 $9,900 Kubota 18 hp diesel 0 – 9.1 54 or 60 1 – 5 80.3 65.5 1,168 8 Mid 23x10.5



ZD21 Pro $11,280 Kubota 21 hp 0 – 9.4 60 1 – 5 80.3 57.1 1,212 8 Mid 24x12

ZD28 Pro $12,680 Kubota 28 hp 0 – 9.3 60 or 72 1 – 5 88.8 72 1,627 8 Mid 24x12

Kubota Tractor Corp. introduces an all-new fabricated ZD-Pro deck designed especially for the commercial cutter and landscape maintenance contractor. Matched with the ZD21 and ZD28 zero turn mowers, the 7-gauge steel deck offers cutting performance in all grass varieties and conditions. The shaft-driven, low-noise deck is available in a 60 or 72-inch cutting width.

LAND PRIDEModel

Approx. price


Cutting width

(inches)


Overall length

(inches)

Overall width

Weight (pounds)


Mid or front mount?

Tire size

LPZ52 $9,099 Kawasaki 23 hp 0 – 11 52 1 – 5 76 65 1,065 12 Mid 23x9.5-12

LPZ60 $9,499 Kawasaki 23 hp 0 – 11 60 1 – 5 76 75 1,100 12 Mid 24x12-12

LPZ72 $10,499 Kawasaki 25 hp 0 – 11 72 1 – 5 76 82.5 1,230 12 Mid 24x12-12

ZR44 $5,749 Honda 16 or 18 hp 0 – 7 44 1.5 – 4.5 68 49.2 740 12 Mid 18x8.5-8

ZR52 $6,049 Honda 18 or 20 hp 0 – 7 52 1.5 – 4.5 69.6 57.2 755 12 Mid 18x9.5-8

ZRP44 $8,199 Honda 19 hp 0 – 9 44 1.5 – 4.5 72 45 985 12.2 Mid 20x10-10

ZRP52 $8,499 Kawasaki 23 hp 0 – 9 52 1.5 – 4.5 72 53 985 12.2 Mid 20x10-10

Land Pride’s Accu-Z mid-mount mower offers large-capacity fuel tanks, choice of seats, adjustable steering control, turf-type drive tires and a fuel-efficient twin cylinder gas engine. The new Razor Pro series incorporates the convenience of 44- or 52-inch deck sizes with commercial features such as a twin cylinder gasoline powered engine, 11-gauge deck reinforced with 11-gauge double plate and heavy-duty push arms on the mower deck. The new 44- and 52-inch Razor Z are suitable for those small-to-medium residential areas.





LESCOModel

Approx. price

EngineSpeed range

(mph)

Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front

mount?Tire size

Z-two $6,250 Kawasaki 19 hp 0 – 10 48 1.5 – 5.0 73 47 990 13 Mid 23x9.5

Z-two $6,450 Kawasaki 23 hp 0 – 10 54 1.5 – 5.0 78 50.5 1,010 13 Mid 24x12.0

Z-two $6,650 Kawasaki 23 hp 0 – 10 60 1.5 – 5.0 78 50.5 1,035 13 Mid 24x12.0

Lesco Inc. offers its latest zero-turn radius mower: the Z-two. A responsive, quicker-turning drive train improves efficiency and productivity. Hydro-gear pumps and Parker-Ross wheel motors provide smooth operation with ground speeds up to 10.2 mph. An articulating front axle delivers improved tracking stability on hills and uneven terrain.

RICH MFG. INCModel

Approx. price





Overall width

(inches)

Weight(pounds)

Fuel capacity(gallons)

Mid or front

mount?Tire size

1700 * Kawasaki 17 hp 0 – 8 48 – 52 1.5 – 4.5 64 48 – 52 600 5 Mid 20x8

1700-k * Kohler 17 hp 0 – 8 48 – 52 1.5 – 4.5 64 48 – 52 600 5 Mid 20x8

2000 * Kohler 20 hp 0 – 8 48, 52 or 61 1.5 – 4.5 64 48, 52, 61 825 5 Front 20x10

2200 * Kohler 22 hp 0 – 8 48 – 61 1.5 – 4.5 64 48 – 61 825 5 Front 20x10

2500 * Kohler 25 hp 0 – 8 48 – 61 1.5 – 4.5 64 48 – 61 825 5 Front 20x10*Check with supplier for pricing.

The Convertible is a commercial mower that converts from a zero-turn rider to a walk-behind without the use of tools. Conversion requires only pulling a pin and moving the control arm. While mowing on a hillside or around low-hanging branches, the Convertible should be used in the walk-behind position. For open areas, where speed is a must, convert the convertible into a rider.

SCAG POWER EQUIPMENTModel*

Approx. price


Cutting* width

(inches)



Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?Tire size

Sabre Tooth ** Briggs & Stratton 31 hp gas or diesel 0 – 10.5 61 or 72 1 – 6 90 or 92 61 or 72 1,600 or 1,635 10 Mid 24x12

Turf Tiger ** Kawasaki 23, 27 or 29 hp or Kohler 25 or 27 hp 0 – 10 52, 61 or 72 1 – 6 83, 88, 90 52, 61, 73 1,200, 1,298 or

1,348 10 Mid 23x10.5/24x12

Tiger Cub ** Kawasaki 19, 21, 23 or 25 hp or Honda 24 hp or Kohler 20 hp 0 – 10 48 or 52 1 – 5.5 76 49 or 53 975 or 985 10 Mid 23x9.5

Couger Bagger ** Kohler 25 hp or Kawasaki 27 hp 0 – 8.5 42, 48 or 52 1.5 – 5 91, 92, 95 42, 48 or

52 1,285 or 1,260 7.5 Front 23x9.5

Couger Utility ** Kohler 25 hp 0 – 8.5 48 1.5 – 5 99 48 1,150 7.5 Front 23x9.5*Each model comes with choice of engines and decks listed. Some specifications are given as a range to reflect the variety of options available on that model.**Check with supplier for pricing.

The productive Turf Tiger zero-turn rider cuts faster, eliminating double cutting, even in tall, tough grasses or weeds. The maneuverable Turf Tiger features a low center-of-gravity and functional weight distribution for increased hillside stability and positive traction on all types of terrain. The double yolk clamp drive shaft ensures a reliable drive system, and Scag’s spindle assemblies provide years of service.

SCHWEISS BY B&H MFG. INC.Model Approx. price Engine options

Speed range (mph)

Cutting* width

(inches)



Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?Tire size

520Z $9,650 Kohler 20 hp 0 – 10 50 2 – 6 90 52 1,100 11 Mid 23x10.50

625Z $10,175 Kohler 25 hp 0 – 10 60 2 – 6 90 60 1,200 11 Mid 23x10.50

725Z $10,375 Kohler 25 hp 0 – 10 72 2 – 6 90 72 1,300 11 Mid 23x10.50









RICH MFG. INCModel

Approx. price





Overall width

(inches)

Weight(pounds)


Mid or front

mount?Tire size

1700 * Kawasaki 17 hp 0 – 8 48 – 52 1.5 – 4.5 64 48 – 52 600 5 Mid 20x8

1700-k * Kohler 17 hp 0 – 8 48 – 52 1.5 – 4.5 64 48 – 52 600 5 Mid 20x8

2000 * Kohler 20 hp 0 – 8 48, 52 or 61 1.5 – 4.5 64 48, 52, 61 825 5 Front 20x10

2200 * Kohler 22 hp 0 – 8 48 – 61 1.5 – 4.5 64 48 – 61 825 5 Front 20x10

2500 * Kohler 25 hp 0 – 8 48 – 61 1.5 – 4.5 64 48 – 61 825 5 Front 20x10*Check with supplier for pricing.

The Convertible is a commercial mower that converts from a zero-turn rider to a walk-behind without the use of tools. Conversion requires only pulling a pin and moving the control arm. While mowing on a hillside or around low-hanging branches, the Convertible should be used in the walk-behind position. For open areas, where speed is a must, convert the convertible into a rider.

SCAG POWER EQUIPMENTModel*

Approx. price


Cutting* width

(inches)



Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?Tire size

Sabre Tooth ** Briggs & Stratton 31 hp gas or diesel 0 – 10.5 61 or 72 1 – 6 90 or 92 61 or 72 1,600 or 1,635 10 Mid 24x12

Turf Tiger ** Kawasaki 23, 27 or 29 hp or Kohler 25 or 27 hp 0 – 10 52, 61 or 72 1 – 6 83, 88, 90 52, 61, 73 1,200, 1,298 or

1,348 10 Mid 23x10.5/24x12

Tiger Cub ** Kawasaki 19, 21, 23 or 25 hp or Honda 24 hp or Kohler 20 hp 0 – 10 48 or 52 1 – 5.5 76 49 or 53 975 or 985 10 Mid 23x9.5

Couger Bagger ** Kohler 25 hp or Kawasaki 27 hp 0 – 8.5 42, 48 or 52 1.5 – 5 91, 92, 95 42, 48 or

52 1,285 or 1,260 7.5 Front 23x9.5

Couger Utility ** Kohler 25 hp 0 – 8.5 48 1.5 – 5 99 48 1,150 7.5 Front 23x9.5*Each model comes with choice of engines and decks listed. Some specifications are given as a range to reflect the variety of options available on that model.**Check with supplier for pricing.

The productive Turf Tiger zero-turn rider cuts faster, eliminating double cutting, even in tall, tough grasses or weeds. The maneuverable Turf Tiger features a low center-of-gravity and functional weight distribution for increased hillside stability and positive traction on all types of terrain. The double yolk clamp drive shaft ensures a reliable drive system, and Scag’s spindle assemblies provide years of service.

SCHWEISS BY B&H MFG. INC.Model Approx. price Engine options

Speed range (mph)

Cutting* width

(inches)



Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?Tire size

520Z $9,650 Kohler 20 hp 0 – 10 50 2 – 6 90 52 1,100 11 Mid 23x10.50

625Z $10,175 Kohler 25 hp 0 – 10 60 2 – 6 90 60 1,200 11 Mid 23x10.50

725Z $10,375 Kohler 25 hp 0 – 10 72 2 – 6 90 72 1,300 11 Mid 23x10.50

SIMPLICITYModel

Approx. price


Cutting width

(inches)



Overall width

(inches)

Weight(pounds)


Mid or front mount?

Tire size

ZT 1638 $3,675 Kohler 16 hp 0 – 5.5 38 1.25 – 4.0 61.5 49.5 581 2 Mid 18x8.5ZT 1644 $4,075 Kohler 16 hp 0 – 5.5 44 1.25 – 4.0 61.5 56 581 2 Mid 18x8.5ZT 1850 $5,125 Briggs & Stratton 18 hp 0 – 5.5 50 1.25 – 4.0 61.5 62 612 3.25 Mid 18x9.5Simplicity Mfg. offers a residential zero-turn mower in 16- and 18-hp models. The steering system is easy to learn and simple to oper-ate. Features include dual hydrostatic drive, 38-, 44- or 50-inch mower cutting widths, electric PTO and Ground Hugger traction.

SNAPPERModel

Approx. price*


Cutting width

(inches)



Overall** width

(inches)

Weight(pounds)


Mid or front

mount?Tire size

Pro Cruiser MZM2300KH $5,749 Kohler 23 hp 0 – 8 52 or 61 1 – 5 75 49 746 6 Mid 21x11

Pro Cruiser ZM2501KH $6,649 Kohler 25 hp 0 – 8 52 or 61 1 – 5 75 49 765 6 + 1.75 aux. Mid 23x10.50

Pro Cruiser ZMT2500KH $6,649 Kohler 25 hp 0 – 8 52 or 61 1 – 5 75 49 770 6 + 1.75 aux. Mid 23x10.50

Turf Cruiser ZF2101DKU $8,649 Kubota 21 hp diesel 0 – 7.2 52, 61 or 73 1 – 5 72 48 755 6 Front 21x11

Turf Cruiser ZF2301GKU $8,449 Kubota 23 hp 0 – 7.2 52, 61 or 73 1 – 5 72 48 755 6 Front 21x11

Turf Cruiser ZF2501KH $6,549 Kohler 25 hp 0 – 7.2 52, 61 or 73 1 – 5 68 48 705 6 Front 21x11

Pro Z NZM19480KWV $5,999 Kawasaki 19 hp 0 – 9.5 48 1 – 4.5 77 60 980 12 Mid 23x9.5

Pro Z NZM21520KWV $6,399 Kawasaki 21 hp 0 – 9.5 52 1 – 4.5 77 64 1,000 12 Mid 23x9.5*Suggested advertised pricing. **Without deck.

Snapper offers two new Pro Z mid-mount zero-turn mowers. One features a 19-hp Kawasaki OHV V-twin with 48-inch deck, the other touting a 21-hp Kawasaki OHV V-twin with 52-inch deck. The engines come standard with full pressure lubrication, dual element canister air cleaners, electronic ignition and spin-on oil filters. Both models offer a fan-cooled dual path zero-turn hydrostatic drive system.

SWISHER MOWER AND MACHINE CO.Model

Approx. price


Cutting width

(inches)



Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?Tire size

ZT1436 $2,699 Briggs Intek 14 hp 0 – 5 36 1.5 – 3.5 65 39 515 2 Mid 18x650-8

ZT17542B $3,099 Briggs Intek 17.5 hp 0 – 5.25 42 1.5 – 3.5 65 44 515 2 Mid 18x950-8

ZT20050 $3,599 Briggs Intek 20 hp * 50 1.5 – 3.5 68 52 600 2 Mid 20x10-8*Not available.

Swisher’s zero-turn radius mower is available in 36-, 42- and 50-inch mowing deck widths. All three models are designed for ma-neuvering around shrubs, trees and other obstacles. A 360-degree turning radius greatly reduces mowing time. Features include electric clutch, twin comfort grip control levers and padded high back seat with armrest for a comfortable ride.

THE TORO CO.Model

Approx. price


Cutting width

(inches)



Overallwidth

(inches)

Weight(pounds)


Mid or front

mount?Tire size

Z100 Series * Kohler 20 or 23 hp, or Kawasaki 12, 19 or 23 hp 0 – 9.5** 44 or 52 1.5 – 4.5 78 55 – 65 885 10 Mid 23x9.5

Z200 Series * Kohler 23 or 25 hp, or Kawasaki 25 hp 0 – 9.5 52, 62 or

72 1.5 – 5 84 65 – 85 1,000 12 Mid 24x12

Z300 Series * Kohler 20 or 25 hp 0 – 9 48 1 – 4.5 97 50 1,270 6 Front 23x9.5*Check with supplier for pricing. **Top speed varies according to engine option.

Toro Z-Master Z286E mid-mount electronic fuel injected ZRT is designed for landscape professionals, providing power, speed, efficiency and comfort. Landscape contractors will save time, money and the environment through such features as 10 mph forward ground speed, up to 20 percent increased fuel efficiency, 15 percent more engine torque and an onboard diagnostic system that monitors engine performance.









WALKER MFG. CO.Model

Approx. price

EngineSpeed range

(inches)

Cutting width

(inches)



Overall width

(inches)*

Weight(pounds)


Mid or front mount?

Tire size

MS $7,120 Kawasaki 13 hp 0 – 5 36 – 42 1 – 4 89 43 735 1.7 Front 18x6.5-8

MC $8,245 Kohler 18 hp 0 – 5 36 – 56 1 – 4 89 43 850 3 Front 18x8.5-8

MDD $12,120 Kubota 21 hp diesel 0 – 7 36 – 74 1 – 4 88 43 1,045 5 Front 18x9.5-8

MT20 $9,120 Kohler 20 hp 0 – 7 36 – 62 1 – 4 88 43 930 5 Front 18x9.5-8

MTL $10,420 Kohler 25 hp 0 – 7 36 – 74 1 – 4 88 43 970 5 Front 18x9.5-8

MT26EFI $10,170 Kohler 26 hp 0 – 7 36 – 74 1 – 4 88 43 930 5 Front 18x9.5-8*Dimensions shown for a GHS model with 42-inch deck (typical).

Walker Manufacturing introduces the Model MTL, a liquid-cooled version of the popular Model MT. Using Kohler’s 25-hp Aegis engine, together with an oversized aluminum radiator and electric cooling fan, this strong combination delivers increased engine life, quiet operation and better fuel economy. Operators can also expect easy starting, consistent running temperatures and user-friendly maintenance.

WRIGHT MFG. INC.Model

Approx. price


Cutting width

(inches)


Overall length (inches)

Overall width

(inches)**

Weight(pounds)


Mid or front

mount?Tire size

Sentar * 19-25 hp 0 – 11 48, 52 or 61 1 – 5.25 *** 55 or 70 905 – 950 10.7 Mid 23x9.5

Stander * 15-25 hp 0 – 8 36, 42, 48, 52 or 61 1.75 – 4.5 *** 36.5 – 62 605 – 765 6.4 Mid 18x6.5*Check with supplier for pricing. **Chute deflector adds 10 inches to width. **Not available.

Wright Mfg.’s Sentar zero-turning-radius mower combines the agility of a standup with the power and comfort of a sitdown. The padded seat folds out of the way; Rapid-Hite lets the operator quickly adjust the deck height and the mower’s weight distribution can be adjusted on the fly. An operator presence switch eliminates the need for safety levers.

YAZOO/KEES

ModelApprox.

priceEngine

Speed range (mph)

Cutting width

(inches)



Overall width(inches

Weight(pounds)


Mid or front

mount?Tire size

ZHDD2761 * Vanguard 27 hp 0 – 11 61 1.5 – 6 95 72 1,540 11.2 Mid 26x12

ZHDG6134 * Vanguard 34 hp 0 – 11 61 1.5 – 6 95 72 1,540 11.2 Mid 26x12



ZVKH5223 * Kohler 23 hp 0 – 10 52 1.5 – 6 82 63 1,060 11.2 Mid 24x12

ZVKW5223 * Kawasaki 23 hp 0 – 10 52 1.5 – 6 82 63 1,060 11.2 Mid 24x12



ZVKHL6123 * Kohler 23 hp 0 – 10 61 1.5 – 6 82 72 1,090 11.2 Mid 24x12

ZVKH6125 * Kawasaki 25 hp 0 – 10 61 1.5 – 6 82 72 1,090 11.2 Mid 24x12






ZKW4217 * Kawasaki 17 hp 0 – 8 42 1.5 – 5 72 53 750 11.2 Mid 20x10

ZKWQL4217 * Kawasaki 17 hp 0 – 8 42 1.5 – 5 72 53 750 11.2 Mid 20x10

ZBIQL4818 * Briggs & Stratton 18 hp 0 – 8 48 1.5 – 5 72 59 815 11.2 Mid 20x10



*Check with supplier for pricing.

The Mega-Max from Yazoo/Kees is the newest, largest mower in the company’s expanding product line. It is a large frame, mid-mount ZTH designed for demanding professional users. The cutter deck is constructed with 7- and 10-gauge steel and is available in either a 61- or 72-inch width. Six adjustable anti-scalp rollers provide optimum turf protection on the most uneven terrain. An optional mulching kit quickly converts the cutter deck to a mulching mower.

ZTR








WALKER MFG. CO.Model

Approx. price

EngineSpeed range

(inches)

Cutting width

(inches)



Overall width

(inches)*

Weight(pounds)


Mid or front mount?

Tire size

MS $7,120 Kawasaki 13 hp 0 – 5 36 – 42 1 – 4 89 43 735 1.7 Front 18x6.5-8

MC $8,245 Kohler 18 hp 0 – 5 36 – 56 1 – 4 89 43 850 3 Front 18x8.5-8

MDD $12,120 Kubota 21 hp diesel 0 – 7 36 – 74 1 – 4 88 43 1,045 5 Front 18x9.5-8

MT20 $9,120 Kohler 20 hp 0 – 7 36 – 62 1 – 4 88 43 930 5 Front 18x9.5-8

MTL $10,420 Kohler 25 hp 0 – 7 36 – 74 1 – 4 88 43 970 5 Front 18x9.5-8

MT26EFI $10,170 Kohler 26 hp 0 – 7 36 – 74 1 – 4 88 43 930 5 Front 18x9.5-8*Dimensions shown for a GHS model with 42-inch deck (typical).

Walker Manufacturing introduces the Model MTL, a liquid-cooled version of the popular Model MT. Using Kohler’s 25-hp Aegis engine, together with an oversized aluminum radiator and electric cooling fan, this strong combination delivers increased engine life, quiet operation and better fuel economy. Operators can also expect easy starting, consistent running temperatures and user-friendly maintenance.

YAZOO/KEES

ModelApprox.

priceEngine

Speed range (mph)

Cutting width

(inches)



Overall width(inches

Weight(pounds)


Mid or front

mount?Tire size









ZVKHL6123 * Kohler 23 hp 0 – 10 61 1.5 – 6 82 72 1,090 11.2 Mid 24x12

ZVKH6125 * Kawasaki 25 hp 0 – 10 61 1.5 – 6 82 72 1,090 11.2 Mid 24x12






ZKW4217 * Kawasaki 17 hp 0 – 8 42 1.5 – 5 72 53 750 11.2 Mid 20x10


ZBIQL4818 * Briggs & Stratton 18 hp 0 – 8 48 1.5 – 5 72 59 815 11.2 Mid 20x10



*Check with supplier for pricing.

The Mega-Max from Yazoo/Kees is the newest, largest mower in the company’s expanding product line. It is a large frame, mid-mount ZTH designed for demanding professional users. The cutter deck is constructed with 7- and 10-gauge steel and is available in either a 61- or 72-inch width. Six adjustable anti-scalp rollers provide optimum turf protection on the most uneven terrain. An optional mulching kit quickly converts the cutter deck to a mulching mower.

zero-turn mower spec guide - grounds maintenance

Documents