- pp_ programmable - eurekasound!

7/30/2019 - PP_ Programmable - EurekaSound!

1/5

Configuration PP: Customized by you!

Description

Not only does PP Programmable configuration come with default settings that work

perfectly with many effects boxes, but PP Programmable configuration also allows you to

program the FCB1010 settings in an easy & intuitive way. You can program:

MIDI Control Change number AND MIDI Channel for each pedal in EF modeMIDI Control Change number AND MIDI Channel for each Expression Pedal

MIDI Control Change number AND MIDI Channel for Program Changes

MIDI Channel for SP Mode notes

Latch or Pulse mode for the FCB1010 switch relays

So not only can you customize the EurekaPROM-enabled FCB1010 to work with any single

MIDI device, with programmable multi-MIDI Channel capability you can control multiple MIDI

devices simultaneously!

Here's a list of some of the devices our customers use with the PP Programmableconfiguration:

Ableton Live

BOSS VF-1

Digitech GSP1101

Eventide Eclipse

Fractal Audio Axe-FX Standard/Ultra/II

IK Multimedia Amplitube X-Gear

Kemper Profiling Amp

Lexicon MPXG2

Line6 HD Pro Rack & HD500

Native Instruments Guitar Rig

Rocktron Voodu Valve

Roland GP-100

Overview

Four Modes, easily switched between using the Up/Down pedals:

Effects Mode: Turn individual effects on/off in stompbox-like fashion, with state

reflected on the pedal LED

Presets Mode: Easily enter presets 0-127, banks 0-9. Up to 1270 presets!

Favorite Presets Mode: Allows you to store and recall your 10 favorite presets with the

0

: Programmable - EurekaSound! http://www.eurekasound.com/eurekaprom/configurations/pp

5 04/08/2012 23:58


2/5

push of a pedal!

Specials Mode: Control the FCB1010 relays and send MIDI notes!

Expression Pedals programmable for wah & volume. MIDI activity LED. And waterproof

labels!

Modes

Switch between modes with UP/DOWN pedals.

1) EF: Effects

CC64

6

CC80

7

CC81

8

CC82

9

CC83

10

CC65

1

CC66

2

CC67

3

CC68

4

CC69

5

Notes:

Turn Effects on/off!

Supports 1 MIDI cable (FCB MIDI out-to-Effects processor MIDI in).

LEDs do not automatically update, but they still have state, three in fact: off, on, blip (for

unknown effects state).

The CC#'s listed above are the defaults - you can change them to any CC#.

2) Pr: PresetsBank Increment

6

+100

7

+10

8

+1

9

Send on Change

10

Bank Decrement

1

-100

2

-10

3

-1

4

Send Program

Change

Command

5

Notes:

Enter Presets 0-127, Banks 0-9 & '-' (for no preceding bank).

Select Banks with Pedal 1 & 6. Bank displayed in 7-segment display.

Use Pedals 2-4 & 7-9 to select specific preset. Displayed in 7-segment display.

Press Pedal 5 to send the MIDI Program Change command.

With Pedal 10 on, a Program Change command is sent with each preset/bank change. With Pedal

10 off, Pedal 5 must be pressed for the Program Change command to be sent.

Default preceding bank is CC#0, value = bank#. You can change the default value from 0.

3) FP: Favorite PresetsMemory Location

6

6

Memory Location

7

7

Memory Location

8

8

Memory Location

9

9

Memory Location

10

10

Memory Location1

1

Memory Location2

2

Memory Location3

3

Memory Location4

4

Memory Location5

5

Notes:


5 04/08/2012 23:58


3/5

Store 10 of your favorite Presets for 1 press recall!

To store a Preset:

In Pr mode, select preset, press Send (Pedal 5).

Immediately Press UP to enter FP mode.

Press and hold the pedal you wish to store the Preset for ~5 seconds. The 7-segment display

will flash when stored.

Leave FP mode.

To recall a Preset, press and release the pedal of your choice. Note that the Program Changecommand is sent on the release, not the press.

4) SP: SpecialsNote# 29, V=85

6

Note# 31, V=85

7

Note# 33, V=85

8

Note# 35, V=85

9

Note# 36, V=85

10

Switch 1

1

Switch 2

2

Note# 24, V=85

3

Note# 26, V=85

4

Note# 28, V=85

5

Notes:

Default for switches is toggle. You can change to momentary operation.

Expression Pedals

MIDI CC1 (default)

Left

MIDI CC7 (default)

Right

MIDI Activity LED

The LED is on when MIDI is sent, off otherwise.

Changing the Default Settings

This video shows you how to program the EurekaPROM-enabled FCB1010 PPconfiguration:


5 04/08/2012 23:58


4/5

Here's a step by step guide to programming Basic PP configuration settings:

Hold down Pedals 9 & 10 on power up.1.

The 7-segment display should now show P1 (Pedal 1).2.

EF pedal configuration (P1-P0)1.

Use the Up and Down pedals to select the CC number (0-127) that will be sent in EF mode for that

pedal.

Press pedal 5 to lock in that selection and move on to the next pedal.

Continue above steps until done with the last pedal (P0)Expression pedal configuration (Ea & Eb)2.

Display should now read "Ea" (Expression A)

Use the Up and Down pedals to select the CC number (0-127) that will be sent when that Expression

Pedal is used

Press pedal 5 to lock in that selection and move on to "Eb" (Expression B)

Pr Prefix configuration (Pr)3.

Display should now read "Pr" (Prefix)

Use the Up and Down pedals to select the CC number (0-127) that will be sent before any Preset change

in Pr mode

Press pedal 5 to lock in that selection.

Switch configuration (S1 & S2)4.

Display should now read "S1" (Switch 1)

Use the Up and Down pedals to select whether the Switch will be in toggle (0) or momentary (1) modePress pedal 5 to lock in that selection and move on to "S2" (Switch 2)

Here's a step by step guide to programming Advanced PP configuration settings:

Hold down Pedals 8 & 10 on power up.1.

The 7-segment display should now show P1 (Pedal 1).2.

EF pedal configuration (P1-P0)1.

Press pedal 5 to move to Channel Select. Display should show "Ch"

Use the Up and Down pedals to select the Channel number (1-16) that will be sent in EF mode for that

pedal.

Press pedal 5 to lock in that selection and move on to CC Select. Display should show "CC".

Use the Up and Down pedals to select the CC number (0-127) that will be sent in EF mode for that

pedal.

Press pedal 5 to lock in that selection and move on to the next pedal.

Continue above steps until done with the last pedal (P0)

Expression pedal configuration (Ea & Eb)2.

Display should now read "Ea" (Expression A)


Use the Up and Down pedals to select the Channel number (1-16) that will be sent when that Expression

Pedal is used.


Use the Up and Down pedals to select the CC number (0-127) that will be sent when that Expression

Pedal is used

Press pedal 5 to lock in that selection and move on to "Eb" (Expression B)

Pr Prefix configuration (Pr)3.

Display should now read "Pr" (Prefix)


Use the Up and Down pedals to select the Channel number (1-16) that will be sent for any Preset

change.


Use the Up and Down pedals to select the CC number (0-127) that will be sent before any Preset change

in Pr mode

Press pedal 5 to lock in that selection.

Switch configuration (S1 & S2)4.

Display should now read "S1" (Switch 1)

Use the Up and Down pedals to select whether the Switch will be in toggle (0) or momentary (1) modePress pedal 5 to lock in that selection and move on to "S2" (Switch 2)


5 04/08/2012 23:58


5/5

PP FAQ

What's the difference between Basic & Advanced PP programming setting?

Advanced PP programming allows you to set the MIDI channel per EF pedal, per Expression Pedal, and per Pr mode.

What do I need for this setup?

A Behringer FCB1010, a MIDI cable, and a MIDI controlled device (plus that device's MIDI manual).

Are there specific examples of how to set up this configuration with device X?Check out posts on our forum, and post questions on the forum regarding specific setups.

Do the default settings work with a specific effect device?

The defaults work with the Fractal Axe, BOSS RC-50, and others. Let us know.

Have more questions? Check our Forum, or Contact us!

2009-2012 EurekaSound LLC

Informar de uso inadecuado | Eliminar acceso | Con la tecnologa de Google Sites


- pp_ programmable - eurekasound!

Documents