20-sdms-02 - se
TRANSCRIPT
Saudi Electricity Company
Distribution Services Sector
SPECIFICATIONS FOR OVERHEAD
LINE ACCESSORIES
Issue Date: 07/07/2019 Page: 1 of 4
20-SDMS-02 REV.03.1
20-SDMS-02 Rev.03.1
SPECIFICATIONS FOR OVERHEAD LINE
ACCESSORIES
This document contains proprietary information developed by and for exclusive use of Saudi Electricity
Company (SEC) Distribution Network. Your acceptance of the document is an acknowledgment that it
must be used for the identified purpose/application and during the period indicated. It cannot be used or
copied for any other purposes nor released to others without prior written authorization of SEC
Distribution Services Sector. SEC shall assume no responsibility for any type of misuse and/or
misapplication, and any harm resulting there from. SEC also reserves the right to take any necessary
actions to protect its interest against unauthorized use.
Saudi Electricity Company
Distribution Services Sector
SPECIFICATIONS FOR OVERHEAD
LINE ACCESSORIES
Issue Date: 07/07/2019 Page: 2 of 4
20-SDMS-02 REV.03.1
20-SDMS-02 Rev.03.1
SPECIFICATIONS FOR OVERHEAD LINE
ACCESSORIES
Saudi Electricity Company
Distribution Services Sector
SPECIFICATIONS FOR OVERHEAD
LINE ACCESSORIES
Issue Date: 07/07/2019 Page: 3 of 4
20-SDMS-02 REV.03.1
Table of Contents
1 Scope .................................................................................................................................. 4
2 Drawings ............................................................................................................................ 4
Saudi Electricity Company
Distribution Services Sector
SPECIFICATIONS FOR OVERHEAD
LINE ACCESSORIES
Issue Date: 07/07/2019 Page: 4 of 4
20-SDMS-02 REV.03.1
1 Scope
This sub-revision of the specification 20-SDMS-02 Rev.03 specifies the drawing details
of additional new overhead line accessories for use with concrete and special pole
structures. It shall always be read in conjunction with 20-SDMS-02 Rev.03 and the latest
revision of 01-SDMS-01.
All the drawings and information in this sub-revision of the specification 20-SDMS-02
Rev.03 shall remain active unless a consolidated revision 20-SDMS-02 Rev.04 is
officially published.
2 Drawings
AutoCAD SHX Text
FIGURE 1A - CROSSARM FOR SPECIAL POLE STRUCTURES, TYPE: SP-1
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
%%UPLAN
AutoCAD SHX Text
%%UCROSSARM DETAILS
AutoCAD SHX Text
5-22 HOLES
AutoCAD SHX Text
3-22 HOLES
AutoCAD SHX Text
%%UTYPE: SP-1
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
%%UPLAN
AutoCAD SHX Text
%%UCROSSARM DETAILS
AutoCAD SHX Text
5-22 HOLES
AutoCAD SHX Text
3-22 HOLES
AutoCAD SHX Text
FIGURE 1B - CROSSARM FOR SPECIAL POLE STRUCTURES, TYPE: SP-2
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
%%UTYPE: SP-2
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 1C - CROSSARM FOR SPECIAL POLE STRUCTURES, TYPE: SP-3
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
%%UPLAN
AutoCAD SHX Text
%%UCROSSARM DETAILS
AutoCAD SHX Text
5-22 HOLES
AutoCAD SHX Text
3-22 HOLES
AutoCAD SHX Text
%%UTYPE: SP-3
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
%%UPLAN
AutoCAD SHX Text
%%UCROSSARM DETAILS
AutoCAD SHX Text
5-22 HOLES
AutoCAD SHX Text
3-22 HOLES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 1D - CROSSARM FOR SPECIAL POLE STRUCTURES, TYPE: SP-4
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
%%UTYPE: SP-4
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
FIGURE 4B - CROSSARM BRACES (SET) FOR SPECIAL POLE STRUCTURES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
%%UBRACING DETAIL-1
AutoCAD SHX Text
%%UBRACING DETAIL-2
AutoCAD SHX Text
%%UPLAN
AutoCAD SHX Text
2-22 HOLES
AutoCAD SHX Text
%%UPLAN
AutoCAD SHX Text
2-22 HOLES
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 5A - EARTHWIRE SUSPENSION SUPPORT FOR SPECIAL POLE STRUCTURES L120x12THKx150LG
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
%%UEARTHWIRE FIXING DETAIL
AutoCAD SHX Text
L120 x 12THK x 150 LG
AutoCAD SHX Text
3-22 HOLES
AutoCAD SHX Text
1-22 HOLES
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 7A - DOUBLE-ARMING PLATE FOR SPECIAL POLE STRUCTURES
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
%%UDOUBLE ARMING PLATE
AutoCAD SHX Text
3-22 HOLES
AutoCAD SHX Text
2-22x100 SLOT HOLES
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 7B - DOUBLE-ARMING SUPPORT PLATE FOR SPECIAL POLE STRUCTURES
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
%%UDOUBLE ARMING SUPPORT PLATE
AutoCAD SHX Text
2-22x100 SLOT HOLES
AutoCAD SHX Text
1-22 HOLES
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 7C - DOUBLE-ARMING PLATE FOR CP13S & CP14D CONCRETE POLE STRUCTURES
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
%%UDOUBLE ARMING PLATE
AutoCAD SHX Text
3-22 HOLES
AutoCAD SHX Text
2-22x155 SLOT HOLES
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 10A - POLE BAND (STAY CLAMP) FOR SPECIAL POLE STRUCTURES, TYPE 1
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
%%USTAY CLAMP TYPE-1 DETAILS
AutoCAD SHX Text
%%UPLAN
AutoCAD SHX Text
POLE BANDS A/F
AutoCAD SHX Text
(MM)
AutoCAD SHX Text
2-M24x100LG W/ 2 PLAIN WASHERS & 1-SPRING WASHER (GR. 8.8)
AutoCAD SHX Text
252
AutoCAD SHX Text
270
AutoCAD SHX Text
294
AutoCAD SHX Text
317
AutoCAD SHX Text
330
AutoCAD SHX Text
231
AutoCAD SHX Text
222
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 10B - POLE BAND (STAY CLAMP) FOR SPECIAL POLE STRUCTURES, TYPE 2
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
%%USTAY CLAMP TYPE-2 DETAILS
AutoCAD SHX Text
%%UPLAN
AutoCAD SHX Text
2-M24x100LG W/ 2 PLAIN WASHERS & 1-SPRING WASHER (GR. 8.8)
AutoCAD SHX Text
POLE BANDS A/F
AutoCAD SHX Text
(MM)
AutoCAD SHX Text
312
AutoCAD SHX Text
297
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 10C - POLE BAND (STAY CLAMP) FOR CONCRETE POLE STRUCTURES
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
STEEL GRADE=8.8
AutoCAD SHX Text
100 X 24MM DIA.
AutoCAD SHX Text
2-PLAIN WASHER
AutoCAD SHX Text
24
AutoCAD SHX Text
40
AutoCAD SHX Text
40
AutoCAD SHX Text
THICKNESS: 12MM
AutoCAD SHX Text
HDG: ASTM A123
AutoCAD SHX Text
STEEL GRADE: ASTM A36
AutoCAD SHX Text
100
AutoCAD SHX Text
& 1-SPRING WASHER
AutoCAD SHX Text
CP10
AutoCAD SHX Text
POLE CODE
AutoCAD SHX Text
STRUCTURE TYPE
AutoCAD SHX Text
300
AutoCAD SHX Text
194
AutoCAD SHX Text
(MM)
AutoCAD SHX Text
DIAMETER
AutoCAD SHX Text
POLE BAND
AutoCAD SHX Text
LV
AutoCAD SHX Text
SINGLE CIRCUIT
AutoCAD SHX Text
PMT H-STRUCTURE
AutoCAD SHX Text
PMT SINGLE-POLE
AutoCAD SHX Text
CP13S
AutoCAD SHX Text
CP13S
AutoCAD SHX Text
CP13S
AutoCAD SHX Text
267
AutoCAD SHX Text
300
AutoCAD SHX Text
355, 370, 390
AutoCAD SHX Text
DOUBLE CIRCUIT
AutoCAD SHX Text
CP14D
AutoCAD SHX Text
MACHINE BOLT W/
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 14 - MACHINE BOLTS - M16
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
O - DIAMETER OF BOLT
AutoCAD SHX Text
Lt - LENGTH OF THREADS
AutoCAD SHX Text
L - LENGTH OF BOLT
AutoCAD SHX Text
Lt = 75 FOR 100 < L < 200
AutoCAD SHX Text
Lt = 100 FOR 200 <= L <=300
AutoCAD SHX Text
Lt = L FOR L <= 100
AutoCAD SHX Text
Lt = 150 FOR L > 300
AutoCAD SHX Text
FLAT WASHER
AutoCAD SHX Text
4
AutoCAD SHX Text
3
AutoCAD SHX Text
11
AutoCAD SHX Text
3
AutoCAD SHX Text
L
AutoCAD SHX Text
SPRING WASHER
AutoCAD SHX Text
M16
AutoCAD SHX Text
13
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
10
AutoCAD SHX Text
STEEL GRADE
AutoCAD SHX Text
8.8
AutoCAD SHX Text
A.B.C.
AutoCAD SHX Text
MANUFACTURE'S MARK
AutoCAD SHX Text
L
AutoCAD SHX Text
Lt
AutoCAD SHX Text
M16
AutoCAD SHX Text
M16 x 145mm
AutoCAD SHX Text
M16 x 165mm
AutoCAD SHX Text
M16 x 275mm
AutoCAD SHX Text
M16 x 300mm
AutoCAD SHX Text
NOTE:-
AutoCAD SHX Text
- EACH BOLT SHOULD BE PROVIDED WITH 1 NUT, 2FLAT WASHERS AND
AutoCAD SHX Text
1 SPRING WASHER OF ABOVE MENTIONTED SIZE.
AutoCAD SHX Text
- ALL BOLTS SHALL BE GRADED 8.8
AutoCAD SHX Text
M16 x 250mm
AutoCAD SHX Text
908202009
AutoCAD SHX Text
908202217
AutoCAD SHX Text
908202010
AutoCAD SHX Text
908202210
AutoCAD SHX Text
908202XXX
AutoCAD SHX Text
M16 x 325mm
AutoCAD SHX Text
M16 x 350mm
AutoCAD SHX Text
908202XXX
AutoCAD SHX Text
908202XXX
AutoCAD SHX Text
- SS 'UNIFIED' MATERIALS
AutoCAD SHX Text
- REQUESTED NEW RR MATERIALS
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 15 - MACHINE BOLTS, M20
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
Lt - LENGTH OF THREADS
AutoCAD SHX Text
O - DIAMETER OF BOLT
AutoCAD SHX Text
L - LENGTH OF BOLT
AutoCAD SHX Text
Lt = 100 FOR 200<= L <= 300
AutoCAD SHX Text
Lt = 150 FOR L > 300
AutoCAD SHX Text
Lt = L FOR L <= 100
AutoCAD SHX Text
Lt = 75 FOR 100 < L < 200
AutoCAD SHX Text
12
AutoCAD SHX Text
3
AutoCAD SHX Text
FLAT WASHER
AutoCAD SHX Text
SPRING WASHER
AutoCAD SHX Text
L
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
MIN.
AutoCAD SHX Text
10
AutoCAD SHX Text
16
AutoCAD SHX Text
M20
AutoCAD SHX Text
MANUFACTURE'S MARK
AutoCAD SHX Text
A.B.C.
AutoCAD SHX Text
STEEL GRADE
AutoCAD SHX Text
8.8
AutoCAD SHX Text
L
AutoCAD SHX Text
Lt
AutoCAD SHX Text
M20
AutoCAD SHX Text
M20 x 60mm
AutoCAD SHX Text
M20 x 225mm
AutoCAD SHX Text
M20 x 265mm
AutoCAD SHX Text
M20 x 285mm
AutoCAD SHX Text
M20 x 310mm
AutoCAD SHX Text
M20 x 325mm
AutoCAD SHX Text
M20 x 365mm
AutoCAD SHX Text
M20 x 380mm
AutoCAD SHX Text
M20 x 400mm
AutoCAD SHX Text
NOTE:-
AutoCAD SHX Text
- EACH BOLT SHOULD BE PROVIDED WITH 1 NUT, 2 FLAT WASHERS AND
AutoCAD SHX Text
1 SPRING WASHER OF ABOVE MENTIONED SIZE.
AutoCAD SHX Text
- ALL BOLTS SHALL BE OF GRADE 8.8
AutoCAD SHX Text
908202012
AutoCAD SHX Text
908202014
AutoCAD SHX Text
908202015
AutoCAD SHX Text
908202219
AutoCAD SHX Text
908202019
AutoCAD SHX Text
908202020
AutoCAD SHX Text
908202023
AutoCAD SHX Text
908202024
AutoCAD SHX Text
908202025
AutoCAD SHX Text
M20 x 430mm
AutoCAD SHX Text
908202xxx
AutoCAD SHX Text
M20 x 350mm
AutoCAD SHX Text
908202xxx
AutoCAD SHX Text
M20 x 450mm
AutoCAD SHX Text
908202xxx
AutoCAD SHX Text
M20 x 70mm
AutoCAD SHX Text
908202xxx
AutoCAD SHX Text
M20 x 410mm
AutoCAD SHX Text
908202xxx
AutoCAD SHX Text
M20 x 170mm
AutoCAD SHX Text
908202013
AutoCAD SHX Text
M20 x 270mm
AutoCAD SHX Text
908202017
AutoCAD SHX Text
M20 x 300mm
AutoCAD SHX Text
908202018
AutoCAD SHX Text
M20 x 335mm
AutoCAD SHX Text
908202021
AutoCAD SHX Text
M20 x 345mm
AutoCAD SHX Text
908202022
AutoCAD SHX Text
LEGEND:
AutoCAD SHX Text
- SS 'UNIFIED' MATERIALS
AutoCAD SHX Text
- RR MATERIALS
AutoCAD SHX Text
- REQUESTED NEW RR MATERIALS
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 16 - SHOULDER EYE BOLTS - M16
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
- SS 'UNIFIED' MATERIALS
AutoCAD SHX Text
- REQUESTED NEW RR MATERIALS
AutoCAD SHX Text
14mm DIA.
AutoCAD SHX Text
100
AutoCAD SHX Text
M16
AutoCAD SHX Text
68
AutoCAD SHX Text
90
AutoCAD SHX Text
35mm DIA.
AutoCAD SHX Text
FLAT WASHER
AutoCAD SHX Text
SPRING WASHER
AutoCAD SHX Text
L
AutoCAD SHX Text
2 HEXAGONAL NUT
AutoCAD SHX Text
155
AutoCAD SHX Text
170
AutoCAD SHX Text
180
AutoCAD SHX Text
235
AutoCAD SHX Text
255
AutoCAD SHX Text
265
AutoCAD SHX Text
275
AutoCAD SHX Text
285
AutoCAD SHX Text
300
AutoCAD SHX Text
310
AutoCAD SHX Text
- EACH SHOULDER EYE BOLT SHOULD BE PROVIDED WITH 2 NUTS, 1 FLAT WASHER
AutoCAD SHX Text
AND 1 SPRING WASHER.
AutoCAD SHX Text
- ALL BOLTS SHALL BE GRADE 8.8
AutoCAD SHX Text
%%UNOTE%%U:-
AutoCAD SHX Text
3
AutoCAD SHX Text
4
AutoCAD SHX Text
13
AutoCAD SHX Text
335
AutoCAD SHX Text
SHOULDER EYE BOLT, M16
AutoCAD SHX Text
LENGTH
AutoCAD SHX Text
SEC ITEM CODE
AutoCAD SHX Text
908202220
AutoCAD SHX Text
908202003
AutoCAD SHX Text
908202198
AutoCAD SHX Text
908202221
AutoCAD SHX Text
908202222
AutoCAD SHX Text
908202005
AutoCAD SHX Text
908202223
AutoCAD SHX Text
908202224
AutoCAD SHX Text
908202006
AutoCAD SHX Text
908202225
AutoCAD SHX Text
908202XXX
AutoCAD SHX Text
- SHOULDER EYE BOLT SHALL BE FORGED IN ONE-PIECE WITHOUT WELDING
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 22C - ANCHOR ROD THIMBLE EYE WITH TURN-BUCKLE (ADJUSTABLE) 24MM DIA. X 2500MM LENGTH FOR SPECIAL POLE STRUCTURES
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
24mm DIA.
AutoCAD SHX Text
41
AutoCAD SHX Text
24
AutoCAD SHX Text
17.5
AutoCAD SHX Text
38
AutoCAD SHX Text
24 DIA.
AutoCAD SHX Text
2000
AutoCAD SHX Text
100
AutoCAD SHX Text
300
AutoCAD SHX Text
500
AutoCAD SHX Text
300
AutoCAD SHX Text
%%UDROP FORGED THIMBLE EYE
AutoCAD SHX Text
620
AutoCAD SHX Text
24 DIA.
AutoCAD SHX Text
%%UWITH 24mm Dia. ANCHOR ROD
AutoCAD SHX Text
ANCHOR ROD
AutoCAD SHX Text
24mm DIA.
AutoCAD SHX Text
THIMBLE EYE
AutoCAD SHX Text
%%UMIN. TENSILE STRENGTH: Rm = 500 N/mm2
AutoCAD SHX Text
%%UH.D.G. HIGH STRENGTH STEEL
AutoCAD SHX Text
D
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
32mm DIA.
AutoCAD SHX Text
R
AutoCAD SHX Text
75
AutoCAD SHX Text
14
AutoCAD SHX Text
32
AutoCAD SHX Text
40
AutoCAD SHX Text
42
AutoCAD SHX Text
32 DIA.
AutoCAD SHX Text
ANCHOR ROD
AutoCAD SHX Text
32mm DIA.
AutoCAD SHX Text
TWIN EYE
AutoCAD SHX Text
500
AutoCAD SHX Text
300
AutoCAD SHX Text
300
AutoCAD SHX Text
2000
AutoCAD SHX Text
%%UDROP FORGED TWIN EYE
AutoCAD SHX Text
620
AutoCAD SHX Text
32 DIA.
AutoCAD SHX Text
100
AutoCAD SHX Text
%%UWITH 32mm Dia. ANCHOR ROD
AutoCAD SHX Text
%%UMIN. TENSILE STRENGTH: Rm = 500 N/mm2
AutoCAD SHX Text
FIGURE 22D - ANCHOR ROD TWIN EYE WITH TURN-BUCKLE (ADJUSTABLE) 32MM DIAMETER X 2500MM LENGTH FOR SPECIAL POLE STRUCTURES
AutoCAD SHX Text
%%UH.D.G. HIGH STRENGTH STEEL
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 23 - STEEL PLATE (H.D.G.) FOR ANCHOR RODS
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
STAY PLATE DIMENSION
AutoCAD SHX Text
450x450x6
AutoCAD SHX Text
STAY PLATE
AutoCAD SHX Text
HOLE DIAMETER (%%C)
AutoCAD SHX Text
18
AutoCAD SHX Text
HOLE FOR ANCHOR ROD
AutoCAD SHX Text
450
AutoCAD SHX Text
450
AutoCAD SHX Text
THK.
AutoCAD SHX Text
450x450x10
AutoCAD SHX Text
22
AutoCAD SHX Text
450x450x10
AutoCAD SHX Text
26
AutoCAD SHX Text
"%%C"
AutoCAD SHX Text
450x450x12
AutoCAD SHX Text
26
AutoCAD SHX Text
450x450x12
AutoCAD SHX Text
34
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 26A - PREFORMED GUY GRIP (BIG-GRIP DEAD-END) FOR GALVANIZED STAY WIRE, 9/16" or 14.48MM DIAMETER (UTS = 155.7kN) FOR SPECIAL POLE STRUCTURES
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
STRANDS
AutoCAD SHX Text
NUMBER OF
AutoCAD SHX Text
9/16", 14.48mm Dia
AutoCAD SHX Text
13.1-14.48
AutoCAD SHX Text
(MIN.-MAX.)
AutoCAD SHX Text
DIA. RANGE
AutoCAD SHX Text
7
AutoCAD SHX Text
BREAKING
AutoCAD SHX Text
100%%% of Stay Wire
AutoCAD SHX Text
LOAD
AutoCAD SHX Text
IDENTIFICATION
AutoCAD SHX Text
CROSSOVER MARKS AND COLOR CODE
AutoCAD SHX Text
L
AutoCAD SHX Text
LABEL
AutoCAD SHX Text
1400
AutoCAD SHX Text
%%P30mm
AutoCAD SHX Text
LENGTH (L)
AutoCAD SHX Text
MINIMUM
AutoCAD SHX Text
APPROXIMATE
AutoCAD SHX Text
HOLDING
AutoCAD SHX Text
RATED
AutoCAD SHX Text
155.7 kN
AutoCAD SHX Text
STRENGTH
AutoCAD SHX Text
D (MIN. 32.65 - MAX. 66.68)
AutoCAD SHX Text
I.D CODE
AutoCAD SHX Text
COLOR
AutoCAD SHX Text
BLACK
AutoCAD SHX Text
- MATERIAL: GALVANIZED CARBON STEEL WIRE
AutoCAD SHX Text
%%UNOTE%%U:-
AutoCAD SHX Text
%%USTAY WIRE
AutoCAD SHX Text
STAY
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
FIGURE 27A - HEAVY DUTY GUY THIMBLE, SIZE 5/8" FOR SPECIAL POLE STRUCTURES
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
SEAT DIAMETER
AutoCAD SHX Text
GROOVE DIAMETER = 5/8" OR 15.9MM
AutoCAD SHX Text
- MATERIAL : DROP FORGED STEEL
AutoCAD SHX Text
%%UNOTE
AutoCAD SHX Text
- HOT DIP GALVANIZED
AutoCAD SHX Text
(MIN. 32.65 - MAX. 66.68)
AutoCAD SHX Text
FOR STAY WIRE DIAMETER RANGE: 13.1MM - 14.48MM (UTS = 155.7 kN)
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
FIGURE 64A - ALLEY ARM BRACE FOR SPECIAL POLE STRUCTURES, TYPE: AA-1
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
%%UALLEY ARM (TYPE: AA-1) DETAILS
AutoCAD SHX Text
1-168.3 x 8THK PIPE
AutoCAD SHX Text
20 VENT HOLE
AutoCAD SHX Text
20 VENT HOLE
AutoCAD SHX Text
%%UPLAN
AutoCAD SHX Text
65x8THKx250LG GUSSET PLATE
AutoCAD SHX Text
%%UA
AutoCAD SHX Text
4-M24x100LG W/ 2 PLAIN WASHERS & 1-SPRING WASHER (GR. 8.8)
AutoCAD SHX Text
%%UVIEW-A
AutoCAD SHX Text
8-20 HOLES
AutoCAD SHX Text
%%UTYPE: AA-1
AutoCAD SHX Text
%%UALLEY ARM (TYPE: AA-1) CLAMP DETAILS
AutoCAD SHX Text
ALLEY ARM CLAMPS A/F
AutoCAD SHX Text
(MM)
AutoCAD SHX Text
507
AutoCAD SHX Text
455
AutoCAD SHX Text
586
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
%%UALLEY ARM (TYPE: AA-2) DETAILS
AutoCAD SHX Text
1-168.3 x 8THK PIPE
AutoCAD SHX Text
20 VENT HOLE
AutoCAD SHX Text
20 VENT HOLE
AutoCAD SHX Text
%%UPLAN
AutoCAD SHX Text
65x8THKx250LG GUSSET PLATE
AutoCAD SHX Text
%%UVIEW-A
AutoCAD SHX Text
%%UA
AutoCAD SHX Text
4-M24x100LG W/ 2 PLAIN WASHERS & 1-SPRING WASHER (GR. 8.8)
AutoCAD SHX Text
1-168.3 x 8THK PIPE
AutoCAD SHX Text
8-20 HOLES
AutoCAD SHX Text
FIGURE 64B - ALLEY ARM BRACES FOR SPECIAL POLE STRUCTURES, TYPE: AA-2
AutoCAD SHX Text
%%UTYPE: AA-2
AutoCAD SHX Text
%%UALLEY ARM (TYPE: AA-2) CLAMP DETAILS
AutoCAD SHX Text
ALLEY ARM CLAMPS A/F
AutoCAD SHX Text
(MM)
AutoCAD SHX Text
507
AutoCAD SHX Text
455
AutoCAD SHX Text
586
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES
AutoCAD SHX Text
Page XX of XX
AutoCAD SHX Text
Dated:
AutoCAD SHX Text
%%UALLEY ARM (TYPE: AA-3) DETAILS
AutoCAD SHX Text
1-88.9 x 5THK PIPE
AutoCAD SHX Text
20 VENT HOLE
AutoCAD SHX Text
20 VENT HOLE
AutoCAD SHX Text
%%UPLAN
AutoCAD SHX Text
65x8THKx250LG GUSSET PLATE
AutoCAD SHX Text
%%UA
AutoCAD SHX Text
4-M24x100LG W/ 2 PLAIN WASHERS & 1-SPRING WASHER (GR. 8.8)
AutoCAD SHX Text
8-20 HOLES
AutoCAD SHX Text
%%UVIEW-A
AutoCAD SHX Text
FIGURE 64C - ALLEY ARM BRACE FOR SPECIAL POLE STRUCTURES, TYPE: AA-3
AutoCAD SHX Text
%%UTYPE: AA-3
AutoCAD SHX Text
%%UALLEY ARM (TYPE: AA-3) CLAMP DETAILS
AutoCAD SHX Text
ALLEY ARM CLAMPS A/F
AutoCAD SHX Text
(MM)
AutoCAD SHX Text
504
AutoCAD SHX Text
498
AutoCAD SHX Text
526
AutoCAD SHX Text
2019-07
AutoCAD SHX Text
20-SDMS-02 REV.03.1
AutoCAD SHX Text
SPECIFICATIONS FOR OVERHEAD LINE ACCESSORIES