2004s web cat

Weatherable CoatingsWeatherable coatings are UV resistant and can be safely used for outdoor and indoor applications.

Brown Derby Chameleon Cream Jersey Cream Sandy Tan Coffee Tan Brandy Beige

Black Magic Black Cat Urethane Black Wrinkle Bright White HFSD Clear Light Chocolate Burgundy

Pale Yellow Safety Yellow Dandelion Yellow Yellow Flamboyant BlueTranslucent

Tinted BrassTranslucent

Transparent RedTranslucent

Red Safety Red Ruby Candy Apple Pumpkin Orange Safety Orange

Electric Blue Ocean Blue Dodger Blue US Blue Teal Dark Purple Powder Blue

Turf Green Tropical Green Pine Green Emerald Dark Green Safety Green Bluegrass Green

Bronze Bubble Gum Bay Mist White Linen RAL5015Sky Blue

RAL6005British Racing Grn

Vanilla

Metallic CoatingsSafe to use on outdoor items.

Charcoal Metallic Metallic Brushed Nickel

Copper Metallic Red Sparkle Merceded Silver Limited Gold Dark Gray Argent

Glossy Silver Green Sparkle Blue Sparkle Mayan Gold Aluminum Epoxy Reflectra 525(Must be topcoat-

ed with clear)

Reflectra 325(Must be topcoat-

ed with clear)

Silver Sparkle Light Gray Light Sandstone

Powder Coating Color Chart

Illusions CoatingsIllusion products are designed as a minimum two-coat process. A base coat, preferably high gloss polyester is applied and followed by a top coat of Illusion. Multiple coats of the Illusion products and colors may be applied to create different visual effects. The maximum color shifting effect is acheived when a darker base coat is used. (recommend our Black Magic). Safe for outdoor items.

Illusion Amber Illusion Amethyst Illusion Aquamarine

Illusion Emerald Illusion Lapis

High Temperature Silicone PaintThese silicone based powders can withstand prolonged service temp. of up to 1000F. Ideal for applications such as grills, stoves, furnaces and engines.

Burner Black High Temp Silver

Non-Weatherable CoatingsGreat for indoor items. Not UV resistant, so avoid using them where sunlight may fade the color.

Steel Epoxy Matte Black Epoxy Ink Epoxy Robin Red Wrinkle Military Blue Wrinkle

Forest Green Wrinkle

Gold Rush Vein

Zinc PrimerUse As A Basecoat

To Increase Corrosion Resistance

Powder Coating Color Chart

Glow In The Dark AdditiveOur Glow In The Dark powder coating additive is a class of newly developed phosphorescent (glow-in-the-dark) pigments which are based on Strontium Oxide Aluminate Chemistry. They are drastically different from conventional phosphorescent pigments which are either based on Zinc Sulfide or on radio-isotopes for their self-luminous properties. - Afterglow period of ten times current ZnS based phosphorescent pigments.- Initial afterglow brightness of up to ten times that of conventional phospho-rescent pigments.- Increase in luminescence and afterglow with longer activation time Excellent weather and light fastness- Free of hazardous and radioactive substances- 3 oz of additive treats 1 lb of powder-Works best in light colored powders and clears.

PCPPSA3 GLOW ADDITIVE 3OZ $29.99

Related Products: Metallic Additives - Page 6 Masking Products - Page 7

Here is a great way to paint small parts. The process is simple, requiring only an old electric oven to bake the finish on.

Firstly, the surface of the part is suitably prepared, just as you would for any other paint job.

The special gun is attached to an air compressor, and a power unit. The air blows the powder from the gun, and the power unit gives the powder a positive charge. At the same time, the power unit is connected to the piece being coated, and so it has a negative charge. As the positive paint particles fly through the air, they are attracted to the part and lay in an even layer over the entire area of the part. (This works a little like dust on a TV screen.)

The part is then placed in an dedicated electric oven (or curing lamp), and baked for a while. This cures the coating to a tough chemical resistant finish. It is important not to use a gas oven, as the emissions from the coating are flammable. In addition to this system, you will need an air compressor that outputs 3-4 CFM and a dedicated electric oven or curing lamp.

Why are our powder guns better than our competitors?Our powders cups are tapered to provide smoother flow, and they are gravity fed, rather than siphoned. The charge switch is controlled by a foot pedal, leaving your hands free - competitor’s are hand controlled. The power pack is more compact and lighter. Sturdier construction - less powder leaks

System Specifications:1 Year Limited WarrantyInput Voltage: 110volt 60HZ ACFixed Output Voltage: 16KVDC Manual Discharge 2 x Powder Gun Cups3 x Conical Fan Spray Pattern tipsExternal High Voltage Power SupplyIn line filterFoot switchGround Clip CableFree Technical Support

PCGUN125 POWDER COATING SYSTEM $125.00 $95.00Limited Time Offer

PCCUP POWDER COATING GUN CUP $5.00

What is Powder Coating?Powder Coating was invented in the 1950’s. It is a method of finishing a metallic surface by the application of dry powder. When the powder is fused to the metal with a heat source, the coating forms a continuous and integrated bond with the sub-strate. Initially, only thermoplastic resins were used in a fluidized bed application system. The development of thermosetting epoxy, polyurethane & polyester resins in the 1960’s and 70’s, combined with new spray application techniques opened up a much wider segment of the metal finishing industry to powder coatings.

Powder ChemistryCaswell powders are all of the highest virgin quality and are the same powders that are used in commercial powder coating shops around the world. Weatherable powder coatings are suitable for use in all indoor and outdoor applications, as are metal-lic, transparent and high temp coatings. Non-weatherable powder coatings are suitable for use in indoor applications only.

Cure CyclesCuring times for each powder are listed on the following pages. Curing times listed are after flow-out, meaning after the part has reached the recommended temperature and the powder has begun to flow. Cure cycles are listed as time/temperture in degrees fahrenheit.

Gloss RatingsGloss ratings are given as tested using the 60° ASTM D523 test, which specifies how many units of light are reflected. The higher the number, the more glossy the paint.

Powder Coating System

Related Products: Ceramic Coatings - Page 75 Curing Lamps - Page 9

Powder Coating ColorsColors are available in 4 sizes (1 LB, 2 LB, 5 LB & 10 LB). To order, add the size to the end of the code.E.g. PCP510081 = 1 LB BLACK MAGIC, PCP5100810 = 10 LBS BLACK MAGIC

CODE NAME GLOSS CURE CYCLE 1LB 2LB 5LB 10LBPCP51008 BLACK MAGIC 90-999 10/350 $11.95 $19.95 $39.95 $75.00

PCP50004 BRIGHT WHITE 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP50018 WHITE LINEN 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP4444 HFSD CLEAR 90-1000 15/375 $11.95 $19.95 $39.95 $75.00

PCP53004 JERSEY CREAM 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP53018 SANDY TAN 45-55 10/350 $11.95 $19.95 $39.95 $75.00

PCP53022 COFFEE TAN 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP53026 BRANDY BEIGE 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP54002 LIGHT CHOCOLATE 40-55 10/350 $11.95 $19.95 $39.95 $75.00

PCP54008 BROWN DERBY 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP55004 PALE YELLOW 45-55 10/350 $11.95 $19.95 $39.95 $75.00

PCP56008 PUMPKIN 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP56014 BURGANDY 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP56016 SAFETY RED 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP56020 RUBY 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP56022 RED 75-110 15/350 $11.95 $19.95 $39.95 $75.00

PCP57002 POWDER BLUE 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP57006 OCEAN BLUE 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP57014 DODGER BLUE 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP57016 US BLUE 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP57020 ELECTRIC BLUE 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP57032 BUBBLE GUM 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP58004 TURF GREEN 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP58008 TROPICAL GREEN 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP58010 PINE GREEN 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP58016 EMERALD 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP58020 DARK GREEN 45-55 10/350 $11.95 $19.95 $39.95 $75.00

PCP58024 TEAL 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP6181 BLACK WRINKLE 0-5 15/375 $11.95 $19.95 $39.95 $75.00

PCP57036 DARK PURPLE 80-110 10/350 $16.45 $27.45 $54.75 $102.75

PCP9700 YELLOW 90-110 15/375 $11.95 $19.95 $39.95 $75.00

PCP6840 BLACK CAT URETHANE 25-35 15/390 $11.95 $19.95 $39.95 $75.00

PCP55012 DANDELION YELLOW 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP58006 SAFETY GREEN 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP58014 BLUEGRASS GREEN 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP52014 BAY MIST 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP56006 ORANGE 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP50024 CREAM 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP56024 CANDY APPLE 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP55006 SAFETY YELLOW 10-110 10/350 $11.95 $19.95 $39.95 $75.00

PCP54012 BRONZE 45-55 10/350 $11.95 $19.95 $39.95 $75.00

PCP53014 CHAMELEON 45-55 10/350 $11.95 $19.95 $39.95 $75.00

PCP56002 SAFETY ORANGE 80-110 10/350 $11.95 $19.95 $39.95 $75.00

PCPRAL5015 RAL5015 82+ 10/356 $11.95 $19.95 $39.95 $75.00

PCP52004 LIGHT GRAY 45-55 10/350 $11.95 $19.95 $39.95 $75.00

Powder Coating ColorsCODE NAME GLOSS CURE CYCLE 1LB 2LB 5LB 10LB

PCP55002 VANILLA 80-1110 10/350 $11.95 $19.95 $39.95 $75.00

PCP6005 RAL6005 BRITISH RCNG GRN 82+ 10/356 $11.95 $19.95 $39.95 $75.00

TRANSLUCENT COLORS

PCP2566 FLAMBOYANT BLUE 90-120 15/390 $11.95 $19.95 $39.95 $75.00

PCP7406 TINTED BRASS 90-1000 10/400 $16.45 $27.45 $54.75 $102.75

PCP9978 TRANSPARENT RED 90-150 90-150 $11.95 $19.95 $39.95 $75.00

NON-WEATHERABLE COATINGS

PCP1789 STEEL EPOXY 68-78 10/380 $11.95 $19.95 $39.95 $75.00

PCP1064 MATTE BLACK EPOXY 2-5 15/375 $11.95 $19.95 $39.95 $75.00

PCP3037 INK EPOXY 15-30 10/400 $11.95 $19.95 $39.95 $75.00

PCP5616M ZINC PRIMER EPOXY 70-95 5/400 $11.95 $19.95 $39.95 $75.00

PCP124001 ROBIN RED WRINKLE EPOXY 1-3 10/375 $16.45 $27.45 $54.75 $102.75

PCP125003 MILITARY BLUE WRINKLE EPOXY 1-3 10/375 $11.95 $19.95 $39.95 $75.00

PCP126007 FOREST WRINKLE EPOXY 1-3 10/400 $11.95 $19.95 $39.95 $75.00

PCP139010 GOLD RUSH VEIN EPOXY 20-40 10/400 $11.95 $19.95 $39.95 $75.00

METALLIC COATINGS

PCP3708 CHARCOAL METALLIC 65-85 10/400 $16.45 $27.45 $54.75 $102.75

PCP4043 METALLIC BRUSHED NICKEL 20-50 10/375 $24.95 $41.45 $82.25 $154.25

PCP9990 COPPER METALLIC 35-55 10/350 $16.45 $27.45 $54.75 $102.75

PCP2878G RED SPARKLE 90-110 10/400 $16.45 $27.45 $54.75 $102.75

PCP3299 MERCEDES SILVER 80-150 10/380 $11.95 $19.95 $39.95 $75.00

PCP4002 LIMITED GOLD 45-75 10/400 $24.95 $41.45 $82.25 $154.25

PCP5136 DARK GRAY ARGENT 10-25 10/400 $16.45 $27.45 $54.75 $102.75

PCP5467M GLOSSY SILVER 75-95 10/400 $16.45 $27.45 $54.75 $102.75

PCP5505 GREEN SPARKLE 87-100 15/400 $16.45 $27.45 $54.75 $102.75

PCP6141 BLUE SPARKLE 85-999 15/325 $16.45 $27.45 $54.75 $102.75

PCP2983 SILVER SPARKLE 60-110 10/400 $24.95 $41.45 $82.25 $154.25

PCP9299 REFLECTRA 525 (CHROME) 525-625 15/375 $24.95 $41.45 $82.25 $154.25

PCP59004 SILVER VEIN METALLIC 15-35 10/375 $16.45 $27.45 $54.75 $102.75

PCP3706M MAYAN GOLD 30-60 10/400 $24.95 $41.45 $82.25 $154.25

PCP4006 LIGHT SANDSTONE 40-80 10/400 $24.95 $41.45 $82.25 $154.25

HI-TEMP COATINGS

PCP997038 HI-TEMP BURNER BLACK 4-8 15/450 $32.00 $59.00 $125.00 $240.00

PCP99902 HI-TEMP SILVER 15-25 15/450 $32.00 $59.00 $125.00 $240.00

ILLUSIONS COATINGS

PCPPFD602M9 ILLUSIONS AMBER 90+ 10/400 $24.99 $42.00 $96.00 $187.00

PCPPFG603M9 ILLUSIONS AMETHYST 90+ 10/400 $24.99 $42.00 $96.00 $187.00

PCPPFG639M9 ILLUSIONS AQUAMARINE 90+ 10/400 $24.99 $42.00 $96.00 $187.00

PCPPFG640M9 ILLUSIONS EMERALD 90+ 10/400 $24.99 $42.00 $96.00 $187.00

PCPPFK631M9 ILLUSIONS LAPIS 90+ 10/400 $24.99 $42.00 $96.00 $187.00

Powder Coating Additives • A kaleidoscope of colors are in this prism additive. • Make your clear,translucent and candy topcoats dazzle. • 1/2 ounce treats one pound of powder. • 1/2 oz - just $9.99. Yes, this IS the same additive that some other companies sell at as much

as $14.99.

PCPPSA3 PRISM ADDITIVE 1/2OZ $9.99

• Give any powder coating a metallic sparkle with these high quality additives

• 1/2 oz treats one pound of powder • 1/2 oz is only $7.99

PCPRA12 RED ADDITIVE 1/2OZ $7.99

PCPBA12 BLUE ADDITIVE 1/2OZ $7.99

PCPSA12 SILVER ADDITIVE 1/2OZ $7.99

PCPGA12 GOLD ADDITIVE 1/2OZ $7.99

IR ThermometerNON CONTACT THERMOMETER: FITS IN A POCKET. PRICED FOR ANY TOOLBOX.

MiniTemp Non-Contact Thermometer is small enough to fit in a pocket and has laser sighting. It has a temperature range from 0-500°F and a response rate of 500 mSec for each measurement reading.

The distance to spot ratio is 6:1.

The light-weight Mini Temp Non-Contact Thermometer is perfect for powder coating, facility maintenance (both preventative and predictive), machinery inspection, equipment audits, electrical troubleshooting and a range of additional applications and uses. • Emissivity preset at 0.95; 0 to 500°F (-18 to 260°C) • FDA & IEC Class II laser warning label in English • TEMPERATURE RANGE 0 to 500°F (-18 to 260°C) • ACCURACY AT 73°F (23°C) ±2% or ±3.5°F (±2°C), whichever is greater • For targets at 0 to 30°F (-18 to -1°C), ±5°F (±3°C) • REPEATABILITY AT 73°F (23°C) ±2% of reading or ±3°F (±2°C), whichever is greater

• RESPONSE TIME (95%) 500 mSec • AMBIENT OPERATING RANGE 32 to 122°F (0 to 50°C) • EMISSIVITY Preset to .95 • LASER Class II • DISPLAY 7 second hold, LCD backlight, °F or °C selectable • DISTANCE TO SPOT RATIO 6:1 • POWER 9V Alkaline or NiCd battery (included) • WEIGHT 0.5 lb (227g) • DIMENSIONS 6 x 4 x 1.5 in (152 x 101 x 38 mm)

PCIRMT4 IR THERMOMETER $94.99

Powder Coating Thickness GaugeCheck Powder thickness with Powder Checker before curing to help insure correct cured film thickness the first time through the line. Avoid stripping and re-coating which can cause problems with adhesion and coating integrity.

SIMPLE OPERATION 1. Push the Powder Checker perpendicularly into the dry powder so that the two stand-offs (end tabs)

on both sides of the teeth rest firmly on the substrate. 2. Drag the Powder Checker along the surface of the coated part for at least 1 centimeter. 3. Remove the Powder Checker from the surface and examine the marks left in the powder. The

powder thickness is between the highest numbered tooth which made a mark and has powder clinging to it, and the next highest tooth which left no mark and has no powder clinging to it.

PCPSG POWDER THICKNESS CHECKER $39.50

Silicone Caps, Plugs & Masking Supplies

MEGA PLUG KITOnly the highest grade silicone and largest assortment of sizes are used in this kit. 225 pcs ensure that you have the right plug for the job. From conical shapes and countersink plugs all the way to “trim to fit” lengths of tubing, versatility is this kit’s main role in your shop. A perfect choice for powder coaters, platers and anodizers alike.Plugs (conical and countersink) and trim to fit tubing • 1/32” X 1/8” X 5/8” L clear silicone plug (600F) ~ 50 pcs. • 1/16” X 3/16” X 5/8” L clear silicone plug (600F) ~ 50 pcs. • 1/8” X 1/4” X 3/4” L clear silicone plug (600F) ~ 50 pcs. • 1/4” X 3/8” X 3/4” L clear silicone plug (600F) ~ 5 pcs. • 1/8” X 1/2” X 2” L clear silicone plug (600F) ~ 5pcs. • 11/32” X 7/16” X 11/16” L clear silicone plug (600F) ~ 5 pcs. • 5/16” X 1/2” X 1” L clear silicone plug (600F) ~ 5 pcs. • 13/32” X 19/32” X 31/32” L clear silicone plug (600F) ~ 5 pcs. • 1/2” X 21/32” X 1” L clear silicone plug (600F) ~ 5 pcs. • 9/16” X 3/4” X 1” L clear silicone plug (600F) ~ 5 pcs. • 1 3/16” X 1 7/16” X 1” L clear silicone plug (600F) ~ 1 pcs. • .118 clear silicone countersink (600F) ~ 5 pcs. • .157 clear silicone countersink (600F) ~ 5 pcs. • .197 clear silicone countersink (600F) ~ 5 pcs. • .236 clear silicone countersink (600F) ~ 5 pcs. • .125 ID X .250 OD X 4” L clear silicone tube (600F) ~ 9 pcs. • .250 ID X .375 OD X 4” L clear silicone tube (600F) ~ 9 pcs.

MEGA TAPE KITWhy buy 17 rolls of each kind of tape when you can have the best of all of them in one compact master kit? In today’s day and age, a vast amount of masking needs have to be met for various shapes and sizes. Those needs can be achieved in this offering. A stunning 958 pcs. and 16 yards of tape make this the only solution on the market today to cover all the bases. An incredible deal for the powder coater.Tapes (sizes,shapes and rolls) • 3/8” square green (400F) ~ 58 pcs. • 7/16” square green (400F) ~ 58 pcs. • 1/2” square green (400F) ~ 58 pcs. • 9/16 square green tape (400F) ~ 58 pcs. • 3/4” square green tape (400F) ~ 58 pcs. • 3/8”W X 3/4” L rectangular green tape (400F) ~ 58 pcs. • 1/2”W X 3/4” L rectangular green tape (400F) ~ 58 pcs. • 3/8” round green tape discs (400F) ~ 116 pcs. • 7/16” round green tape discs (400F) ~ 116 pcs. • 1/2” round green tape discs (400F) ~ 116 pcs. • 9/16” round green tape discs (400F) ~ 116 pcs. • 3/4” round green tape discs (400F) ~ 58 pcs. • 1” round green tape discs (400F) ~ 29 pcs. • 3/8” X 4 yds green tape roll (400F) ~ 1 pcs. • 1/2” X 4 yds green tape roll (400F) ~ 1 pcs. • 3/4” X 4 yds green tape roll (400F) ~ 1 pcs. • 1” X 4 yds green tape roll (400F) ~ 1 pcs.

UC202 MEGA PLUG KIT $49.99

UC206 MEGA TAPE KIT $49.99

UC204 MEGA CAP KIT $39.99

MEGA CAP KITDo you have a variety of studs and non-threaded tubes to mask from your coating? 17 varieties and 184 pieces make the Mega Cap Kit the best choice for the discriminating coater. Clear silicone caps that provide positive seal and trim to fit tubing in high-impact colors let you quickly and efficiently save time and money by avoiding all the hassles associated with masking studs and prodtruding objects. A sound choice for the anodizer, plater and powder coater. • .125 ID X .250 OD X 1” L clear silicone cap (600F) ~ 20 pcs. • .148 ID X .240 OD X 1” L clear silicone cap (600F) ~ 20 pcs. • .172 ID X .300 OD X 1” L clear silicone cap (600F) ~ 10 pcs. • .156 ID X .280 OD X 1” L clear silicone cap (600F) ~ 20 pcs. • .223 ID X .345 OD X 1 1/2” L clear silicone cap (600F) ~ 10 pcs. • .234 ID X .343 OD X 1” L clear silicone cap (600F) ~ 10 pcs. • .281 ID X .400 OD X 1” L clear silicone cap (600F) ~ 10 pcs. • .295 ID X .445 OD X 1” L clear silicone cap (600F) ~ 10 pcs. • .355 ID X .475 OD X 1 1/2” L clear silicone cap (600F) ~ 10 pcs. • .406 ID X .531 OD X 1” L clear silicone cap (600F) ~ 10 pcs. • .500 ID X .625 OD X 1 1/2” L clear silicone cap (600F) ~ 10 pcs. • .125 ID X 2” L red silicone tube (600F) ~ 7 pcs. • .250 ID X 2” L yellow silicone tube (600F) ~ 7 pcs. • .350 ID X 2” L white silicone tube (600F) ~ 7 pcs. • .400 ID X 2” L blue silicone tube (600F) ~ 7 pcs. • .600 ID X 2” L green silicone tube (600F) ~ 7 pcs. • .750 ID X 2” L rusty-red silicone tube (600F) ~ 7 pcs.

Powder Coating Masking TapePOWDER COATING TAPE - 2 MIL

This 2 mil polyester tape has a 1.3 mil coating of a specially cured silicone adhesive that removes cleanly when exposed to temperatures that do not exceed 400 degrees F.

An excellent general purpose tape for powder coating masking.

PCTAPE12 POWDER COATING TAPE 1/2” X 72 YDS $3.95

PCTAPE1 POWDER COATING TAPE 1” X 72 YDS $6.25

PCTAPE2 POWDER COATING TAPE 2” X 72 YDS $12.50

Iron Phosphate Powder Coating PrimerIncrease the corrosion resistance of your powder coated parts.

Caswell Iron Phosphate Primer is a concentrated liquid, multiple temperature, detergent iron phosphate. It provides metal sur-faces with a unique underpaint corrosion resistance and prepares the metal for a strong paint bond.

It is effective on steel, aluminum & zinc.

Immerse parts in the diluted solution at 70-160°F for 2-5 minutes.

May also be applied by spray washer. Dilute 0.5-2% with water. Operate at temperatures between 70-160°F for 30-60 seconds.

PCPRIMER16 IRON PHOSPHATE PRIMER 16 OZ MAKES 4 GAL $19.00

PCPRIMER1G IRON PHOSPHATE PRIMER 1 GAL MAKES 32 GAL $49.00

Powder Coating Starter KitOur starter kit contains everything you need to begin powder coating, except a curing oven or lamp. Small items can be cured in a dedicated toaster oven. Larger items can be cured in an old household electric oven. Infrared curing lamps can be used for items that do not fit in an oven.

The kit contains: • Powder Coating Gun (16 KV DC output) • Air compressor (17 PSI, 5 CFM) • 2 Powder Cups and Lids • 1 lb Black Magic High Gloss Powder • 1 pint Iron Phospate Primer (Makes 4 Gals) • 10 Feet Air Hose (connects compressor to gun)

Air Compressor Specifications: • Permanent magnetic DC engine • 17 PSI, 5 CFM fixed output • Requires 12V DC current source, such as a car battery or battery charger • Oil free, clean air output

PCSK POWDER COATING STARTER KIT $199.00

ACQ908 AIR COMPRESSOR $95.00

Curing LampsH&S Auto Shot Curetek Medium Wave Curing Lamp, 1500 Watt

This quality lamp cuts curing time by 40-80%. Its unique reflector design gives even heat distribution and its head is designed to run cooler than competitive models.

1,500 watt medium-wave infrared quartz curing lamp Handles all automotive finishes.

Features a new easy-lock slide adjuster that makes raising and lowering the head quick and simple. No knobs or springs are required. It conveniently adjusts to give roof to rocker coverage.

M1500 Auto Shot Curetek Medium Wave Curing Lamp 1500 WATT $188.50

H&S Auto Shot Curetek Medium Wave Curing Lamp, 2000 Watt

2,000 watt medium-wave infrared curing lamp. The triangular reflector gives even heat with no hot spots and the head rotates for vertical and horizontal curing.

Stable stand has narrow footprint for narrow areas. Comes complete with a 60 minute timer for better control. The new easy-lock slide adjuster is convenient and foolproof.


H&S Auto Shot Curetek Medium Wave Curing Lamp, 9000 Watt

The ultimate in curing systems, this Cure-Tek® lamp is the solution for all of your paint curing needs. It delivers a powerful 9,000 watts of infrared curing power and covers an 8’ by 6 area.

Cures any contour, roof or hood with fully adjustable heads that reach 96” in height. Each head is individually timed for greater flexibility. Ideal for complete panels.


H&S Auto Shot Curetek Short Wave Curing Lamp, 1000 Watts

This lamp is the fastest, most efficient way to cure paint and is the recommended technology for waterborne prod-ucts.

The lamp achieves full temperature in seconds and cures from the panel surface outward. It has separate flash-off and cure settings, is easy to adjust for head height and adjusts to give roof to rocker coverage. The head can be mounted on the stand for horizontal applications, or hand held for vertical application. Works great for hard to reach areas and patch repairs and is ideal for panel bonding. Portable, use it anywhere in the shop. Has a light-weight stand. Uses 120V.

Not recommended for curing powder coat.

S1000 Auto Shot Curetek Short Wave Curing Lamp 1000 WATT $319.95

For Decorative ChromeA revolution in real decorative chrome plating; this new kit has special additives which widen the operating range of the system, making the system much easier for the novice to control. The only addition necessary to the system is distilled water. A small amount of battery acid is required for the copper system.

This 3 step chrome plating kit has been designed to provide a show quality nickel, copper & chrome plate on items such as headlights, bezels, bumperettes, nuts & bolts, brackets, etc. It can be applied to copper, steel, brass, and zinc die cast substrates.

There are three different processes, each with its own tank & chemicals, as well as the degreasing and Electrostripping tanks. The chrome plate is always applied over a nickel plate, which will fuse to most metals quite readily. The copper plating system is used as a hi-build filler to cover blemishes, pits and scratches. The copper plate can be built up to thickness’ of 1/8”, and solder-it can be used to fill in deeper pits. The solder and plate is then sanded/polished and re-plated before nickel plating. This is an invaluable tool for the restorer!

You can plate onto Pot Metal, Lead and Pewter by plating first with Flash Copper. You may then build up with the regular Copper system

if desired, then nickel and chrome plate. Aluminum parts must be dipped in Zincate solution prior to nickel or Flash Copper plating.

1.5 Gallon Kit Contains6 x 2 Gal Plating tanks with locking lids and rings2 x 6” x 8” Nickel anodes & bandages2 x 4” x 8” Copper anodes & ban-dages2 x 12” x 12” Chrome Anodes 2 x 8” x 8” GP Plates 1 Pack Nickel Crystals w/Brightener (Makes 1.5 Gals)1 Pack Copper Crystals w/Brightener (Makes 1.5 Gals)1 Can Chrome Crystals (Makes 1.5 Gals)Chrome Activator 1.5 gal Flash Copper™ Chemicals (A, B, C) 1 Pack SP Degreaser (Makes 2 Gals)4 x 110°F Tank Heaters1 x 300W 210°F Ceramic Heater (for degreaser tank) 3 x Filter/pumps (For Nickel/Copper & Flash Copper Kit)Fume Control Balls1 Pack Pickle #4 (Makes 2 Gals)Caswell Plating Manual Free Technical Support

3 Gallon Kit Contains:6 x 3.5 Gal Plating tanks with locking lids and rings2 x 6” x 8” Nickel anodes & bandages2 x 4” x 8” Copper anodes & ban-dages2 x 12” x 12” Chrome Anodes 2 x 8” x 8” GP Plates 2 Packs Nickel Crystals w/Brightener (Makes 3 Gals)2 Packs Copper Crystals w/Brightener (Makes 3 Gals)2 Cans Chrome Crystals (Makes 3 Gals)Chrome Activator 3 gal Flash Copper™ Chemicals (A, B, C) 2 Packs SP Degreaser (Makes 4 Gals)4 x 110°F Tank Heaters1 x 300W 210°F Ceramic Heater (for degreaser tank) 3 x Filter/pumps (For Nickel/Copper & Flash Copper Kit)Fume Control Balls2 Packs Pickle #4 (Makes 4 Gals)Caswell Plating Manual Free Technical Support

4.5 Gallon Kit Contains:6 x 6 Gal Plating tanks with locking lids and rings2 x 6” x 8” Nickel anodes & bandages2 x 4” x 8” Copper anodes & ban-dages2 x 12” x 12” Chrome Anodes 2 x 8” x 8” GP Plates 3 Packs Nickel Crystals w/Brightener (Makes 4.5 Gals)3 Packs Copper Crystals w/Brightener (Makes 4.5 Gals)3 Cans Chrome Crystals (Makes 4.5 Gals)Chrome Activator 4.5 gal Flash Copper™ Chemicals (A, B, C) 2 Packs SP Degreaser (Makes 4 Gals)4 x 110°F Tank Heaters1 x 300W 210°F Ceramic Heater (for degreaser tank) 3 x Filter/pumps (For Nickel/Copper & Flash Copper Kit)Fume Control Balls2 Packs Pickle #4 (Makes 4 Gals)Caswell Plating Manual Free Technical Support

Nickel plating process will take approx. 30-60 minutes. Copper plate operation will take from 10 minutes to several hours if building up thick layers. The final Chrome plate layer takes only 4 minutes. Nickel & copper kits will plate approx. 60 square feet of surface area, before the anodes need replacing. The Chrome solution will plate over 1000 sq. ft/gal of decorative chrome. Solutions last over the life of many sets of anodes and are not usually disposed of.

TC1 TRIPLE CHROME PLATING KIT 1.5 GAL $495.00

TC2 TRIPLE CHROME PLATING KIT 3 GAL $695.00

TC3 TRIPLE CHROME PLATING KIT 4.5 GAL $795.00

Related Products: Wheel Chroming Kit - Page 24 Copy Chrome™ Kit - Page 15

Bright Nickel Plating KitOur nickel plating kits are designed to provide a commercial quality finish on a miniature scale, in approx. 30 minutes. The finish can be applied as a final treatment, requiring VERY LITTLE buffing to obtain a high shine, or as a base for chrome plating.

Nickel plate has a very slight ‘yellow’ color to it, but in many applications, if polished, it can double as a chrome plate.

All our chemicals are pre-weighed, so all you have to do is to add distilled water. We have tried to keep the processes as simple as possible and have standardized everything wherever we can.

This Nickel Kit will plate a heavy layer onto most metals except pot metal, and it should be used wherever possible, especially under a chrome plate. This system is too acidic for pot metal, which should be plated first in Flash Copper™.

Nickel plate may also be applied over a copper plate, and copper plate will adhere to the nickel. We suggest you apply copper plate to any areas with large scratches or pits, repair them using our solder-it pastes and then nickel plate them.

By buffing the copper plate before nickel plating, you can achieve a very high quality finish, similar to ‘Show Chrome”. If this nickel finish is then chrome plated, the part will be ‘Show Chrome’.

The system uses a 6 or 12 volt battery or charger, and controls the current using light bulbs. If you intend to be plating frequently, we suggest you invest in a rectifier unit. All instructions and operating procedures are detailed in the Caswell Plating Manual. Each anode will plate about 30 sq. ft. of surface area before it needs to be replaced. The solution is virtually permanent. No waste chemicals or dangerous fumes are produced.

The included brightener chemical produces highly ductile deposits, which are free from laminations. It produces brilliant, white deposits of high clarity, reflectivity and depth. Superior ‘leveling’ properties enable fine scratches and imperfections to be filled, enhancing the overall finish.

Our Nickel Kit now plates faster with more coverage in the low current density area. It produces 20 to 30% more thickness in the lower current density area than any other system. If you are chrome plating onto this nickel, you will also get better chrome coverage in the low current density than any other nickel process.

1.5 Gallon Kit:2 x 2 Gal Plating Tank &

Lids 2 x 6” x 8” Nickel Anodes

and Bandages 1 x 2lb SP Degreaser

(Makes 2 Gal) 1 Pack Nickel Crystals with

brighteners (Makes 1.5 Gal) 1 x 110°F Heater (for

plating) 1 x 210°F 300W Ceramic

Heater (for degreasing) 1 x Pump Filter/Agitator The Caswell Plating Manual Free Technical Support

3 Gallon Kit:2 x 3.5 Gal Plating Tank &



(Makes 4 Gal) 2 Packs Nickel Crystals with

brighteners (Makes 3 Gal) 1 x 110°F Heater (for



4.5 Gallon Kit:2 x 6 Gal Plating Tank &



(Makes 4 Gal) 3 Packs Nickel Crystals with

brighteners (Makes 3 Gal) 1 x 110°F Heater (for



15 Gallon Kit:2 x 20 Gal Plating Tank &



(Makes 16 Gal) 10 Packs Nickel Crystals

with brighteners (Makes 15 Gal) 3 x 110°F Heaters (for


Heaters (for degreasing) 1 x Pump Filter/Agitator The Caswell Plating Manual Free Technical Support

NP1 NICKEL PLATING KIT 1.5 GAL $127.00

NP2 NICKEL PLATING KIT 3 GAL $215.00

NP3 NICKEL PLATING KIT 4.5 GAL $285.00

NP4 NICKEL PLATING KIT 15 GAL $765.00

Related Products: Electroless Nickel - Page 21 Copy Chrome™ Kit - Page 15

Provides a hard anodized surface - which can easily be dyed.

Simple to operate - Predictable consistent results

Low Current Density means – Inexpensive power source

Low Current Density means – No heat buildup in the tank

VERY dilute chemical requirement – Environmentally friendly

No fumes – SAFER in confined areas

Fully Expandable - Kits can be made bigger by obtaining larger plastic containers

Conforms to Mil Spec A 8625 F

This kit is designed to provide a professional finish to aluminum substrates for a variety of small products. Ideal for small objects such as vehicle trim, boating accessories, electrical components, household objects, paint ball guns etc.

The Anodizing System:-Using a sulfuric acid process most grades of aluminum

LCD Aluminum Anodizing Kit

can be anodized. The system can be operated from a 12 volt car battery or charger. One gallon of regular strength battery acid (sulfuric) is required to make up the anodizing solution.

Standard Kit6 x 6 gal tanks with locking rings and lids (12” diam x 14” deep) 5 tanks for the Anodizing & Dying Process, 1 tank for Anod-ize Stripping3 x 300 watt x 210°F Ceramic Heaters1 x 300 watt x 110°F Heater1 x 200 watt Adjustable Heater1 x 0.1 Ohm Resistor5 x 10” Strips of Aluminum (for testing)1 x 13” Strip of Aluminum (for tank bar)1 x Rinsing Sprayer1 pack Mist Balls1 x 4oz Mist Suppressant – treats 48 gals of Anodizing Solution1 x 1lb Anodizing Sealant – makes 8 gallons1 x 2lb SP Degreaser – makes 4 gallons2 x 1 qt De-oxidizer – makes 4.5 gallons2 x 8” x 8” GP Plates1 x Air Pump and Airline2 x 1lb Anodize & Chrome Stripper - Makes 6 Gal1 x Color WheelThe Caswell Plating ManualRequires 1 gallon Battery Acid – not supplied

Deluxe Kit6 x 6 gal tanks with locking rings and lids (12” diam x 14” deep) 5 tanks for the Anodizing & Dying Process, 1 tank for Anodize Stripping3 x 300 watt x 210°F Ceramic Heaters1 x 300 watt x 110°F Heater1 x 200 watt Adjustable Heater1 x 0.1 Ohm Resistor5 x 10” Lengths Of Aluminum (for testing)1 x 13” Strip of Aluminum (for tank bar)1 x Rinsing Sprayer1 pack Mist Balls1 x 4oz Mist Suppressant – treats 48 gals of Anod-izing Solution1 x 1lb Anodizing Sealant – makes 8 gallons1 x 2lb SP Degreaser – makes 4 gallons2 x 1 qt De-oxidizer – makes 4.5 gallons2 x 8” x 8” GP Plates1 x Air Pump and Airline2 x 1lb Anodize & Chrome Stripper - Makes 6 Gal1 x Color Wheel1 x Reverse Osmosis System – produces up to 10 gals pure water per day.1 x 20 amp Rectifier – enough power to anodize 6 sq feet at onceThe Caswell Plating ManualRequires 1 gallon Battery Acid – not supplied

Due to the hardness of the Anodize finish, it is ideal for areas where scratching from road grit etc. is likely to pose a problem. It can be considered permanent if the part is buffed and polished before the treatment is carried out. The finish can be made to look like a chrome plate, and no further buffing or polishing will be required.

What is Anodize? - During the process, a thin film of clear colored oxide is formed over the aluminum. This is actually grown out of the metal, and is a part of the original piece, unlike a plated surface which is likely to peel from the substrate. This film is ALUMINUM OXIDE, a very hard protective layer. Because this layer is so hard and corrosion resistant, it makes it the ideal and often preferred choice for the restorer of vehicles with aluminum trim etc.

chemicals. The surface will resist high temperatures, even a blowtorch, for short periods. The issue of safety whilst anodizing is addressed by the use of plastic fume balls and a chemical mist suppressant, both of which float on the surface of the anodizing tank. During operation, no dangerous fumes are evident. Anodize Fume Suppressant may also be used on any sulfuric acid electro-stripping or etching tanks. Don’t rely on mist suppressants entirely, they ALL break down eventually. Fume balls are permanent and they help control heat loss & evaporation, maintaining a more even plating tank temperature. Don’t settle for kits that don’t come with fume balls.

Anodizing Sealant. This is the product the commercial anodizers use. Add only 1 oz per gal of distilled water, and heat to boil for 15-20 mins. 1lb pack makes 16 gals

parts, and prototype work. The Complete Plating Manual discusses the numerous techniques for dyeing, including multicolor, ‘splash’ dyeing, silk screen printing, air brush spraying etc.

Each kit is supplied with a color wheel. Dyes can be mixed together to create a host of different colors. The dyes are in concentrated liquid form, a 4oz bottle makes up 2 gals of ready to use dye. To make up different colors, we suggest that you make up the colors to the correct dilution first, then take a quantity of each dye and blend them together. Colors can be viewed on our web site.

Anodized aluminum has a very durable surface that is unaffected by weather and many

At this stage of the process the film has microscopic pores (see picture right) which have to be sealed by dipping the part into sealant for 15 minutes. The part may be colored prior to sealing by simply soaking in our range of professional anodizing dyes. An almost infinite range of colors can be produced by mixing the dyes together.

The most exciting part of aluminum anodizing, is without doubt, experimenting with the amazing array of colors and effects one can produce, with a little practice and skill. The metal can be pretreated in a variety of ways, polished, scratch brushed etc., the anodize film grown, and then the colors applied prior to sealing the anodize surface, permanently locking the colors into the metal. The system is ideal for paint ball guns, model aircraft

solution.

Anodizing Sealant LT. Here is a great new product which eliminates the need for boiling to seal the anodize. This remarkable material seals in only 5-10 minutes. Simply add 2 fl oz per gallon of distilled lukewarm water. Works by penetrating the pores of the anodized surface and through a precipitation mechanism, plugs the pores to provide an anodic film with improved corrosion resistance. Dye colors may vary. Not recommended for use with red dye.

Aluminum De-Oxidizer & De-Smut. This is the product the commercial anodizers use, a liquid concentrate, added to distilled water, to make a pre-anodize dip which de-smuts, removes unwanted materials such as copper, silicone & magnesium and prepares the metal for immediate anodizing. This is useful on alloys prone to smutting when placed into the anodizing tank. (Usually found on many Japanese motorcycle parts.) Aluminum De-Oxidizer & De-Smut is a chrome-free liquid de-oxidizer for a wide range of alloys. It operates at room temperature and is also an excellent de-oxidizer for aluminum alloys prior to chromating.

Anodize & Chrome Stripper is a super fast commercial grade stripper. It outperforms all others in speed and quality. Does not attack the aluminum.

A reliable source of high quality battery acid can be obtained from NAPA AUTO STORES. Battery acid makes up ALL types of anodizing baths (just add distilled water). No need to carry different solutions for different anodizing tasks. Buying quality battery acid locally saves shipping hazardous materials and HAZMAT charges. It costs next to nothing, so much larger setups can be produced at minimum cost, and if you contaminate the tank, it is inexpensive to replace, unlike pre-made solutions.

AN1 LCD ALUMINUM ANODIZING STANDARD KIT 5 GAL $275.00

AN2 LCD ALUMINUM ANODIZING DELUXE KIT 5 GAL $695.00

ANSTPIG ANODIZE & CHROME STRIPPER 1 GAL $38.00

ANFUM10 ANODIZE FUME SUPPRESSANT 4 OZ $10.00

ALDEOX28 ALUMINUM DE-OXIDIZER & DE-SMUT 1 QUART $15.00

ALSE22 ANODIZING SEALANT 1 LB $22.00

ALSELT18 ANODIZING SEALANT LT 1 PINT $18.00

These professional quality anodizing dyes provide consistent, quality results. The same dyes are sold to professional anodizing shops all over the world. Each 4oz bottle of dye concentrate makes 2 Gallons. The finish will normally have a ‘metallic’ look, and will vary slightly depending on the alloy and surface preparation.Procedure for Obtaining Dyed Anodize:- Anodize the aluminum at 60-75°F for 90 minutes at 4.5 amps per sq foot or 0.03 amps per sq inch.- After thorough rinsing, immerse the part in the dye at a temperature of 140°F for 15 minutes.- Finally, seal by hanging the part in a sealer bath for 15 minutes.Now available in two sizes. 4 oz bottles make 2 Gallons. 1 pint bottles make 8 Gallons. To order 1 Pint bottles, change the numbers at the end of the code. Eg. DYERB9 becomes DYERB26

Teal Violet 3D Yellow 4A Blue 4A Black HBL

Brown BL Green SCG Yellow 3GL Grey NLN Viloet DS

Red Bordeaux 2R Gold S Golden Orange Flourescent Pink Green AEN

Electric Blue Turquoiuse Copper BF Flourescent Yellow Bronze

Grey BL Brown GL Deep Red Olive Drab Fast Blue

Orange 3A

DYERB9/26 RED BORDEAUX 2R 4 oz / 1 Pint $9.00/$26.00

DYEY9/26 YELLOW 4A 4 oz / 1 Pint $9.00/$26.00

DYEB9/26 BLUE 4A 4 oz / 1 Pint $9.00/$26.00

DYEV9/26 VIOLET 3D 4 oz / 1 Pint $9.00/$26.00

DYEBLK27/75 BLACK HBL 4 oz / 1 Pint $27.00/$75.00

DYEGR9/26 GREEN SCG 4 oz / 1 Pint $9.00/$26.00

DYEGO9/26 GOLD S (SIMULATES GOLD PLATE) 4 oz / 1 Pint $9.00/$26.00

DYET9/26 TURQUOISE 4 oz / 1 Pint $9.00/$26.00

DYEOD9/26 OLIVE DRAB 4 oz / 1 Pint $9.00/$26.00

DYEO9/26 GOLDEN ORANGE 4 oz / 1 Pint $9.00/$26.00

DYEGRY9/26 GREY BL 4 oz / 1 Pint $9.00/$26.00

DYEBR9/26 BROWN GL 4 oz / 1 Pint $9.00/$26.00

DYETEAL9/26 TEAL 4 oz / 1 Pint $9.00/$26.00

DYEEB9/26 ELECTRIC BLUE 4 oz / 1 Pint $9.00/$26.00

DYECPBF9/26 COPPER BF 4 oz / 1 Pint $9.00/$26.00

DYEFP27/75 FLOURESCENT PINK 4 oz / 1 Pint $27.00/$75.00

DYEBZ9/26 BRONZE 4 oz / 1 Pint $9.00/$26.00

DYEDR9/26 DEEP RED 4 oz / 1 Pint $9.00/$26.00

DYEFY9/26 FLOURESCENT YELLOW 4 oz / 1 Pint $9.00/$26.00

DYEGRAEN9/26 GREEN AEN 4 oz / 1 Pint $9.00/$26.00

DYEVDS9/26 VIOLET DS 4 oz / 1 Pint $9.00/$26.00

DYEGNLN9/26 GREY NLN 4 oz/1 Pint $9.00/$26.00

DYEYGL9/26 YELLOW 3GL 4 oz/1 Pint $9.00/$26.00

DYEBBL9/26 BROWN BL 4 oz/1 Pint $9.00/$26.00

DYEFB9/26 FAST BLUE 4 oz/1 Pint $9.00/$26.00

DYEO3A ORANGE 3A 4 oz/ 1 Pint $9.00/$26.00

Anodizing Dyes

Related Products: Nickel Plating Kit - Page 11 Electroless Krome Kit - Page 24

Copy Chrome™ Plating KitLooks Like Chrome - Has a hint of Blue!

Hard Like Chrome - Tougher Than Nickel!

Keeps Its Shine - Just Like Chrome!

No Dangerous Chemicals - No Fumes - No Corrosive Acids!

One coat system - eliminates 2 steps!

Copy Chrome™ is a SIMPLE plating kit that provides almost all the benefits of chromium plate - without all the hassle! The entire plating process takes the same time as our regular nickel plating kit, 15 minutes for indoors decorative, 30 minutes for tools, 1 hour for tough outside jobs!

The Copy Chrome™ process is ideal for all your small items such as door handles, brackets, hinges, nuts & bolts, stamped steel covers, etc. It can be applied to:- steel, copper, brass, bronze, old nickel plate, and with the aid of Zincate Primer, aluminum.

All instructions and operating procedures are detailed in the Complete Plating Manual. Each anode will plate about 32 sq. ft of surface area at 0.0005” before it needs to be replaced. The solution is virtually permanent. No waste chemicals or dangerous fumes are produced.

The system uses a 6 or 12 volt battery or charger, and controls the current using light bulbs. If you intend to be plating frequently, we suggest you invest in a rectifier unit. All instructions and operating procedures are detailed in the Caswell Plating Manual. The solution is virtually permanent. No waste chemicals or dangerous fumes are produced.

The included brightener chemical produces highly ductile deposits, which are free from laminations. It produces brilliant, white deposits of high clarity, reflectivity and depth. Superior ‘leveling’ properties enable fine scratches and imperfections to be filled, enhancing the overall finish.

Our Copy Chrome™ Kit now plates faster with more coverage in the low current density area. It produces 20 to 30% more thickness in the lower current density area than any other system.

1.5 Gallon Kit:2 x 2 Gal Plating Tank & Lids 2 x 6” x 8” Nickel Anodes and

Bandages 1 x 2lb SP Degreaser (Makes 2 Gal) 1 Pack Copy Chrome™ Crystals with

brighteners (Makes 1.5 Gal) 1 x 110°F Heater (for plating) 1 x 210°F 300W Ceramic Heater (for

degreasing) 1 x Pump Filter/Agitator The Caswell Plating Manual Free Technical Support

3 Gallon Kit:2 x 3.5 Gal Plating Tank & Lids 2 x 6” x 8” Nickel Anodes and

Bandages 2 x 2lb SP Degreaser (Makes 4 Gal) 2 Packs Copy Chrome™ Crystals with

brighteners (Makes 3 Gal) 1 x 110°F Heater (for plating) 1 x 210°F 300W Ceramic Heater (for


4.5 Gallon Kit:2 x 6 Gal Plating Tank & Lids 2 x 6” x 8” Nickel Anodes and

Bandages 2 x 2lb SP Degreaser (Makes 4 Gal) 3 Packs Copy Chrome™ Crystals with

brighteners (Makes 3 Gal) 1 x 110°F Heater (for plating) 1 x 210°F 300W Ceramic Heater (for


CC1 COPY CHROME PLATING KIT 1.5 GAL $137.00

CC2 COPY CHROME PLATING KIT 3 GAL $235.00

CC3 COPY CHROME PLATING KIT 4.5 GAL $315.00

Copy Cad® & Zinc Plating KitAll the benefits of CADMIUM & ZINC PLATING without

the dangers!No cyanides! No dangerous chemicals!

No fumes! No disposal problemsSacrificial (cathodic) coating ¯ Just like real Cadmium &

Zinc!Inexpensive - no need to deal with plating shops!

Excellent corrosion resistance!

Now, Copy Cad® AND Zinc plating in one kit. By simply adding a special brightener to the solution, the normally dull, flat, whitish look of Copy Cad® is transformed into a commercial quality bright zinc plate. After use, the bath reverts back to the original Cadmium look.

This simple system is designed to give professional results without a complicated ‘chemistry set’. The kit comes with an Abrasive wheel which provides a ‘flat’ finish to the metal for Copy Cad®.

These kits are designed to provide a professional zinc finish to a variety of substrates on small components such as workshop tools, brake boosters, brackets and zinc alloy carburetor castings.

1.5 Gallon Kit: 2 x 2 Gal Plating Tanks &

Lids2 x 4” x 8” Zinc Anodes1 Quart Copy Cad®/Zinc

Solution (Makes 1.5 Gals)Zinc Brightener1 Pack Degreaser (Makes 2

Gals)1 x 110°F Heater (for

plating)1 x 210°F 300W Ceramic

Heater (for degreasing)Abrasive Nylon WheelA/C Power Adapter (300ma

Capacity - Plates Up To 12 sq in)The Caswell Plating ManualFree Technical Support

3 Gallon Kit:2 x 3.5 Gal Plating Tanks &

Lids2 x 4” x 8” Zinc Anodes2 Quarts Copy Cad®/Zinc

Solution (Makes 3 Gals)Zinc Brightener2 Packs Degreaser (Makes

4 Gals)1 x 110°F Heater (for




4.5 Gallon Kit:2 x 6 Gal Plating Tank & Lid2 x 4” x 8” Zinc Anodes3 Quarts Copy Cad®/Zinc

Solution (Makes 4.5 Gals)Zinc Brightener2 Packs Degreaser (Makes

4 Gals)1 x 110°F Heater (for




15 Gallon Kit: 1 x 20 Gal Round Tank & Lid

(21” diam x 18” deep)2 x 12” x 18” zinc anodes3 x 300W Heaters10 Quarts Copy Cad®/Zinc

Solution (Makes 15 Gals)1 Qt Zinc Brightener1 x 25 amp rectifier (Plates

parts up to 1250 sq in)The Caswell Plating ManualFree Technical Support

Zinc plating is a most valuable tool when used in combating corrosion of steel. The zinc corrodes before the steel does, sacrificing itself for the benefit of the steel. A metallurgical bond is formed between the zinc and steel forming an iron rich alloy with tenacious bond. Galvanizing can be left unpainted where it will form its own protective oxide layer.

An A/C adapter is supplied in each kit. This will plate up to 12 sq inches of surface area. Larger items will need alternative power supply, at the rate of 25 milliamps per sq inch of surface area @ 1.5 - 2 volts.

After zinc plating, one of our chromate processes may be applied to the part, increasing corrosion resistance and giving you the choice of several attractive, colored finishes.

ZN1 COPY CAD® & ZINC PLATING KIT 1.5 GAL $127.00

ZN2 COPY CAD® & ZINC PLATING KIT 3 GAL $215.00

ZN3 COPY CAD® & ZINC PLATING KIT 4.5 GAL $285.00

ZINC950 COPY CAD® & ZINC PLATING KIT 15 GAL $950.00

Related Products: Yellow & Olive Drab Chromate - Page 17 Zinc Blackener - Page 17

Chromate Processes For ZincZinc parts may be chromated to achieve various colors and increase corrosion resistance.

After zinc or Copy Cad™ plating, the part is simply dipped into a solution for a few minutes. The zinc & the chromate react to form the new colors. To improve those older zinc (pot metal) castings, plate with a fresh zinc plate before chromating.

Steel parts that have previously been plated with zinc can be chromated with no further pretreatment. Zinc alloy die cast parts may be surface activated by immersion in a weak acid.

The Yellow Chromate is a yellow/bronze iridescent finish on plated cadmium and zinc. Liquid concentrate is used at 0.5% to 3% by volume in water at 65° to 90°F. The finish has outstanding resistance to salt spray, greatly surpasses the normal 96 hour salt spray resistance specified for

yellow chromates on zinc. It will withstand up to 200 hours salt spray. The deposit is a pleasing finish in itself. It is an excellent base for paint. The finish may be dyed to various colors.

The Olive Drab chromate process achieves a pleasing iridescent green color on zinc parts. This finish is commonly found on Rochester carburetors and other parts.

YCHRC5G YELLOW CHROMATE Makes 4 Gal $27.00

ODK27 OLIVE DRAB CHROMATE Makes 2 Gal $35.00

Zinc & Copy Cad® BlackenerZinc Blackener is a room temperature blackening process for die cast and plated zinc surfaces. The very mild acidic liquid concentrate is diluted with 9 parts of water for a 10% by volume working solution.

Immersion times of 2 - 5 minutes.

Surface Preparation

Parts that are freshly plated with Copy Cad® or Zinc plate may be moved directly to the Zinc Blackener system, after rinsing in fresh water.

Older zinc die castings (pot metal) should be blast cleaned with either glass beads or baking soda to remove the oxide layer. Some parts may not blacken evenly. In this situation, blast off the defective coating, then ‘etch’ the metal by immersing in a solution of 5% battery acid and distilled water for 60 seconds. Thoroughly rinse in fresh water, then repeat the blackening process.

To blacken the parts, simply immerse in the made up solution until uniformly black. Agitate the parts to remove air bubbles etc. Rinse the parts in fresh water and allow to dry. Do not handle the parts for at least 1 hour.

Seal the surface with any of the following products:

• Penetrating Sealer (from the Black Oxide system)• WD40• Collinite Metal Wax• Any other wax.

A360 ZINC & COPY CAD® BLACKENER 1 Pint $19.00

Flash Copper™ Plating KitEliminates the use of cyanide strike coats. Eliminates the use of Pot Metal Primer on Zinc Eliminates the use of Nickel Strike on Steel prior to copper plating Increases the bond of acid copper, Nickel and Copy Chrome™ to all substrates

Flash Copper™ is a unique alkaline electrolytic copper plating process with covering and throwing powers greater than cyanide copper. Flash Copper™ plates readily onto Pot Metal and Zinc, acting as a primer for other plating processes. Flash Copper™ is an outstanding pre-plate copper strike for bright nickel, acid copper, tin and solder plates. It is also an excellent decorative finish for buttons, rivets, lighting fixtures and builders’ hardware. The copper plate can be readily blackened or oxidized for a variety of attractive antiqued finishes. It is supplied as a liquid concentrate, which is diluted with water.

Flash Copper™ produces a fine grained, smooth, dense and ductile copper deposit, which is nonporous and has excellent bonding properties. The throwing and covering power of the non-cyanide process is superior to cyanide processes.

The grain is smaller than cyanide copper, which increases the density of the deposit. This density provides excellent heat treat stop off and masking properties. The fine-grained Flash Copper™ deposit under nickel/chrome improves the overall corrosion resistance and helps to throw the nickel farther into the low current density areas.

Flash Copper™ produces a softer and more ductile deposit than cyanide or acid copper. The soft deposit imparts improved adhesion and corrosion resistance and greatly improved resistance to thermal shock. It has a high deposit purity and hence no out-gassing with subsequent brazing, soldering or vacuum operations.

Flash Copper™ Benefits

One solution serves as both a strike and a plate bath. Greater throwing power than acid copper Eliminates the inherent dangers of cyanide in the work place and improves employee health and safety. Flash Copper™ has excellent bath stability and high efficiency. The bath does not have to be dumped as with other baths due to breakdown products or iron buildup. It has a very wide operating window. Flash Copper™ is supplied as a liquid concentrate, which is diluted with distilled water.

1.5 Gallon Kit:1 x 2 Gallon Plating Tank &

Lid Flash Copper™ Part A - 2

Quarts Flash Copper™ Part B - 1

Pint Flash Copper™ Part C - 1

Pint 2 x 4” x 8” Copper Anodes

and bandages 1 x 110°F Heater Caswell Plating ManualFree Technical Support

3 Gallon Kit:1 x 3.5 Gallon Plating Tank

& Lid Flash Copper™ Part A - 4


QuartFlash Copper™ Part C - 1

Quart2 x 4” x 8” Copper Anodes


4.5 Gallon Kit:1 x 6 Gallon Plating Tank &

Lid Flash Copper™ Part A - 6


pintsFlash Copper™ Part C - 3

Pints2 x 4” x 8” Copper Anodes


15 Gallon Kit:1 x 20 Gallon Plating Tank

& Lid Flash Copper™ Part A - 20


QuartsFlash Copper™ Part C - 5

Quarts2 x 18” x 20” Copper Anodes

and bandages3 x 300w 100°F Heater The Caswell Plating ManualFree Technical Support

FL1 FLASH COPPER™ PLATING KIT 1.5 GAL $105.00

FL2 FLASH COPPER™ PLATING KIT 3 GAL $195.00

FL4 FLASH COPPER™ PLATING KIT 4.5 GAL $315.00

FL15 FLASH COPPER™ PLATING KIT 15 GAL $629.00

Related Products: Antiquing Solutions - Page 106 Triple Chrome Plating Kit - Page 10

Bright Acid Copper Plating KitFor the restorer, copper plating must be one of the most useful repair tools there is. By applying layers of copper, and sanding between applications, an incredibly smooth surface can be quickly built up, covering scratches and minor pits caused by corrosion.

Copper can be plated up to 1/8” thick within a matter of a few hours. More extensive repairs can be made by the use of a soldering iron and solder, which can be simply melted into the pits and sanded flat. A final layer of copper plate to seal over the solder filler can then be buffed and polished to a high quality luster. The successive layers of nickel and chrome plate applied to this type of quality substrate, will ensure a ‘show quality’ finish.

Copper can be used to ‘electroform’, making complete objects from pure copper, by simply making a mold from wax & conductive powder, copper plating the mold, then melting the wax. Copper can also be formed over lead molds, and the lead melted away afterwards. This has some applications for the person wishing to reproduce decals. The system will operate at room temperature, but plates smoother and faster at 100°F.

1.5 Gallon Kit:2 x 2 Gal Plating Tanks &

Lids2 x Copper Anodes 4” x 8”

and bandages1 Pack Copper Crystals

(Makes 1.5 Gals)1 x 4oz Copper Brightener1 x 2lb Pack SP Degreaser

(Makes 2 Gal)1 x 110°F Heater (for plat-

ing)1 x Pump Filter/Agitator1 x 210°F 300W Ceramic

Heater (for degreasing)The Caswell Plating ManualFree Technical Support



and bandages2 Packs Copper Crystals

(Makes 3 Gals)2 x 4oz Copper Brightener2 x 2lb Pack SP Degreaser




4.5 Gallon Kit:2 x 6 Gal Plating Tanks &



(Makes 4.5 Gals)3 x 4oz Copper Brightener2 x 2lb Pack SP Degreaser




15 Gallon Kit:2 x 20 Gal Plating Tanks &

Lids2 x Copper Anodes 18” x

20” and bandages10 Pack Copper Crystals

(Makes 15 Gals)10 x 4oz Copper Brightener8 x 2lb Pack SP Degreaser

(Makes 16 Gal)3 x 300W Tank Heaters 1 pump/filter3 x 210°F 300W Ceramic

Heater (for degreasing) The Caswell Plating ManualFree Technical Support

The copper plate can be applied directly over brass, copper or nickel, but cannot plate directly onto steel or aluminum, which requires a ‘strike coat’ of nickel to be applied first. There are no cyanides in this kit, and its operation creates no waste chemicals or dangerous fumes. To plate directly onto Steel, Pot Metal, Zinc Die Cast or Lead, use our Flash Copper™ Kit.

The solution can be considered a permanent fixture. The anodes are sacrificial and each supplies sufficient metal to plate approx. 20 sq. ft @ .001”. Additional anodes can be ordered separately.

CU1 COPPER PLATING KIT 1.5 GAL $127.00

CU2 COPPER PLATING KIT 3 GAL $215.00

CU3 COPPER PLATING KIT 4.5 GAL $285.00

CU4 COPPER PLATING KIT 15 GAL $765.00

Related Products: Antiquing Solutions - Page 106 Triple Chrome Plating Kit - Page 10

Silver Plating KitCaswell Silver is a new type of alkaline cyanide free silver plating solution that will plate over nickel, sterling silver, gold, rhodium, copper, brass and bronze. The system will provide uniform color consistency and even coverage.

It is important when silver plating to realize what type of finish is required on the part. If a highly polished surface is required, the part must be buffed to a high shine before plating. If a matt finish is required, then the part should be beat blasted or buffed with something like a Scrubber wheel.

In our tank plating systems, pure silver will be deposited on the part in 1 to 5 minutes, depending on the thickness of plate required. The system uses approx 2-6 volts and 1 amp per 16 square inches. The system operates at room temperature, so no heater is required.

Our cyanide free silver solution plates substantially faster than cyanide silver and with superior adhesion to cyanide silver. It plates with a brilliant white color. The bath is operated at room temperature.

The steps to achieve a brilliant silver finish are:

1. Buff & Polish2. Degrease & Rinse3. Acid Activate (with battery acid, not supplied)4. Plate with Flash Copper (Steel, Pot Metal & Pewter only)5. Plate with Silver6. Acid Activate7. Treat with Silver Conditioner (prevents tarnishing)

Potassium Hydroxide is used to raise the PH of the solution when required. The system must be maintained at a PH of 8.8-9.5.

1.5 Gallon Kit: 3 x 2 Gal Tanks & Lids2lb SP Degreaser (Makes 2 Gals)1 x 210°F Heater (for degreasing)1 x Air Pump & Air Tube1 x Filter Pump2 x Charcoal Filter Packs2 x Silver Anodes (4” x 6”)1 x PH Meter3 Quarts Silver Concentrate Part A

(Makes 1.5 Gals)1 Quarts Silver Concentrate Part B1 Quart Silver Conditioner8oz Potassium Hydroxide (KOH)1 x Rinse SprayerCaswell Plating ManualFree Technical Support

3 Gallon Kit:3 x 3.5 Gal Tanks & Lids2lb SP Degreaser (Makes 2 Gals)1 x 210°F Heater (for degreasing)1 x Air Pump & Air Tube1 x Filter Pump2 x Charcoal Filter Packs2 x Silver Anodes (4” x 6”)1 x PH Meter6 Quarts Silver Concentrate Part A

(Makes 1.5 Gals)2 Quarts Silver Concentrate Part B2 Quart Silver Conditioner8oz Potassium Hydroxide (KOH)1 x Rinse SprayerCaswell Plating ManualFree Technical Support

4.5 Gallon Kit:3 x 6 Gal Tanks & Lids2 x 2lb SP Degreaser (Makes 4 Gals)1 x 210°F Heater (for degreasing)1 x Air Pump & Air Tube1 x Filter Pump4 x Charcoal Filter Packs2 x Silver Anodes (4” x 6”)1 x PH Meter9 Quarts Silver Concentrate Part A

(Makes 1.5 Gals)3 Quarts Silver Concentrate Part B4 Quart Silver Conditioner2 x 8oz Potassium Hydroxide (KOH)1 x Rinse SprayerCaswell Plating ManualFree Technical Support

SI1 SILVER PLATING KIT 1.5 GAL $455.00

SI2 SILVER PLATING KIT 3 GAL $655.00

SI3 SILVER PLATING KIT 4.5 GAL $725.00

PNPS12 PLUG N’ PLATE SILVER SOLUTION 4 OZ $15.00

SPS45 PLUG N’ PLATE SILVER SOLUTION 1 PINT $45.00

SPS80 PLUG N’ PLATE SILVER SOLUTION 1 QUART $80.00

SLVRANOD SILVER ANODE 4” x 0.5” (0.032”) $25.00

SLVRANOD195 SILVER ANODE 4” x 6” (0.032”) $50.00

Related Products: Silverplater - Page 29 Gold Plating Kit - Page 27

Electroless Nickel Plating KitThe Ideal Way to Plate Small Parts - Easily - Economically - Quickly

No Batteries, Rectifiers or Other Power Sources RequiredCyanide Free – No Fumes

Plates Many Metals - All Steels, Irons, Copper, Brass, Bronze, Lead Free Solders, and Nickel Alloys.

Even & Uniform Layer, Inside Tubes, Corners etc. No Anode Shadow!

No Disposal Problems - Drain Safe After Treatment (included)

Electroless nickel plating requires no anodes, power supply or electrical connection of any kind. The process simply entails mixing together some solutions, heating them to just off the boil, and then immersing the part to be plated. An auto catalytic electrochemical reaction takes place and the nickel is evenly deposited all over the part being plated. The thickness of the plate will depend on the duration of immersion. To stop the reaction, remove the part from the solution. Like all plating, the brightness of the plate depends on the brightness of the part before plating. The brighter the shine initially, the brighter the shine after plating. Numerous variations of the final finish are achieved by changing the surface preparation.

Electroless nickel plating is not new; it has many applications in industry. Because the system plates evenly over all areas of the part, even down

tubes and holes, it is frequently used to plate firearms and small hand tools. For the motorcycle restoration enthusiast, electroless nickel is a great tool for evenly plating the air cooling fins on many engine blocks, particularly older Indians & Harleys. Electroless nickel plates at an approx. rate of 1 mil (1/1000”) per hour. Indoor decorative applications will need approx. 0.25 mil or 15 min. of plating. General outdoor items (hand tools, hand guns) should receive 0.5 mils or 30 min. Items requiring high corrosion resistance should receive 1 mils or 60 min.

When electroless plating, you may not plate any item that has a surface area exceeding the maximum load of the bath. The maximum load is 30 sq. in./quart of plating bath. The maximum loads for our kits are:

Mini Kit - 75 square inchesStandard Kit - 150 square inchesDeluxe Kit - 300 square inchesJumbo Kit - 600 square inches

As the baths are used, nickel depletes from the solution. You will need to replenish this periodically, using our unique method of calculating the nickel loss. Additions to the solution may be made with small quantities of Part A & Part C. This system will NOT plate pot metal. We sell an Electroless Pot Metal Primer for this purpose.

Mini Kit (Makes 5 Pints):1 Gal Plastic Tank and Lid50W Ceramic HeaterMist Control BallsElectroless Nickel Concen-

trate - part A 8 ozElectroless Nickel /Krome™

Concentrate - part B 12 oz Electroless Nickel/Krome™

Concentrate - part C 8 oz END Plate out disposal con-

centrate 4 oz2 Steel Plate Out PadsThe Caswell Plating ManualFree Technical Support

Standard Kit (Makes 10 Pints):2 Gal Plastic Tank and Lid50W Ceramic HeaterMist Control BallsElectroless Nickel Concen-

trate - part A 16 ozElectroless Nickel /Krome™

Concentrate - part B 24 ozElectroless Nickel/Krome™

Concentrate - part C 16 ozEND Plate out disposal con-

centrate 4 oz2 Steel Plate Out PadsMeasuring CupThe Caswell Plating ManualFree Technical Support

Deluxe Kit (Makes 2.5 Gals):3.5 Gal Plastic Tank and Lid300W Ceramic HeaterMist Control BallsElectroless Nickel Concen-

trate - part A 32 ozElectroless Nickel/Krome™



centrate 4 oz8 Steel Plate Out PadsMeasuring cupThe Caswell Plating ManualFree Technical Support

Jumbo Kit (Makes 5 Gal):6 Gal Plastic Tank and Lid300W Ceramic HeaterMist Control BallsElectroless Nickel Concen-

trate - part A 64 ozElectroless Nickel/Krome™




EN1 ELECTROLESS NICKEL KIT MINI $65.00

EN2 ELECTROLESS NICKEL KIT STANDARD $135.00

EN3 ELECTROLESS NICKEL KIT DELUXE $265.00

EN4 ELECTROLESS NICKEL KIT JUMBO $395.00

Related Products: Electroless Krome™ Kit - Page 24 Copy Chrome™ Kit - Page 15

Plug N’ Plate™ KitsPlug N’ Plate™ is a new concept in plating small parts. Our unique mains power pack supplies just the right amount of power allowing you to brush, and in some situations, dip plate your smaller components.

The Plug N’ Plate™ system will also allow you to patch repair areas where the original plating has worn away.

Plug N’ Plate™ is ideal for vintage vehicle restorers, antique collectors and dealers, and small workshops doing prototype work.

What could be simpler? The Plug N’ Plate™ wand is attached to the red plug on the Power Pack, and the alligator clip is attached to the work-piece. The end of the wand is covered in an absorbent bandage, which is soaked in the plating solution for a few seconds.

By simply stroking the part with swift brush strokes, the circuit is closed and the plating metal bearing solution goes to work, depositing its beautiful layer onto the object.

PNPNK28 NICKEL PLATING KITPlates a solid layer of nickel onto steel, iron, and all copper based alloys. Buffs to a beautiful rich shine.

1 x Plug N’ Plate™ Power Supply1 x 8oz Nickel Solution1 x SS Brush Plating Wand1 x Wand Bandage1 x Instruction BookletFree Technical Support

$28.00

PNPCU28 COPPER PLATING KITCopper can be a great repair tool, filling in scratches, or if lac-quered, can be an eye catching finish. It can also be ‘antiqued’ into bronzes, and the famous copper green patina.

1 x Plug N’ Plate™ Power Supply1 x 8oz Copper Solution1 x Copper Brush Plating Wand1 x Wand Bandage1 x Instruction BookletFree Technical Support

$28.00

PNPNC38 NICKEL/COPPER PLATING KITGet the best of both worlds with this neat combo kit.

1 x Plug N’ Plate™ Power Supply1 X 8oz Nickel Solution1 x 8oz Copper Solution1 x Copper Brush Plating Wand1 x SS Brush Plating Wand2 x Wand Bandage1 x Instruction Booklet Free Technical Support

$38.00

PNPBLKR28 BLACK KROME™ PLATING KITPlates a beautiful layer of Black Krome™ onto nickel and all copper based alloys.

1 x Plug N’ Plate™ Power Supply1 x 8oz Black Krome™ Solution 1 x SS Brush Plating Wand1 x Wand Bandage1 x Instruction BookletFree Technical Support

$28.00

PNPTN28 TIN PLATING KITPlates a bright layer of tin onto steel and all copper based alloys. Buffs to a beautiful rich shine.

1 x Plug N’ Plate™ Power Supply1 x 8oz Tin Solution1 x Tin Brush Plating Wand1 x Wand Bandage1 x Instruction BookletFree Technical Support

$28.00

PNPCC28 COPY CHROME™ PLATING KITThis kit is ideal for repairing small damaged areas of chrome, per-haps a small scratch in a bumper, which left untended, would rust causing further damage. Buffing to remove any existing rust, then brush plating with Copy Chrome™ can prevent further rusting and almost eliminate the visibility of the scratch.

1 x Plug N’ Plate™ Power Supply1 x 8oz Copy Chrome™ Solution1 x SS Brush Plating Wand1 x Wand Bandage1 x Instruction BookletFree Technical Support

$28.00

PNPGLD38 GOLD PLATING KITGold Plate car emblems, antiques, jewelry, coins, keepsakes, etc. Almost anything can be replated providing there is a nickel base. (Chrome plate has a nickel base)

1 x Plug N’ Plate™ Power Supply1 x 4oz Gold Solution1 x SS Brush Plating Wand1 x Wand Bandage1 x Instruction BookletFree Technical Support

$40.00

PNPSLV35 SILVER PLATING KITIdeal for repairing antiques with wear damage, or plating from scratch! Quickly puts a heavy layer of silver just where you want it. Headlight reflectors are easily done with this system.

1 x Plug N’ Plate™ Power Supply1 x 4oz Silver Solution1 x Stainless Steel Wand1 x Wand Bandage 1 x Instruction BookletFree Technical Support

$35.00

Plug N’ Plate™ KitsPNPBS35 BRASS PLATING KIT

Plates directly onto steel and copper based al-loys. A great way to get REAL brass plate onto those ‘vintage lamps.

1 x Plug N’ Plate™ Power Supply1 x 4oz Brass Solution1 x Brass Plating Wand1 x Wand Bandage1 x Instruction Booklet

$35.00

PNPBZ28 BRONZE PLATING KITPlates directly onto steel, nickel and copper. Applies a beautiful decorative bronze finish onto small items.

1 x Plug N’ Plate™ Power Supply1 x 8 oz Bronze Solution1 x Stainless Steel Plating Wand1 x Wand Bandage1 x Instruction Booklet

$28.00

PNPWK95 PLUG N’ PLATE™ WORKSHOP KITA complete system which allows you to plate almost everything on a small scale.

1 x Plug N’ Plate™ Power Supply1 x 8oz Nickel Solution1 x 8oz Copper Solution1 x 8oz Copy Chrome™ Solution1 x 4oz Brass Solution1 x 4oz Silver Solution1 x 4oz Gold Solution4 x SS Brush Plating Wands1 x Brass Brush Plating Wand1 x Copper Brush Plating Wand10 x Wand Bandages3 x assorted pen plating wands1 x Instruction BookletFree Technical Support

$106.00

PNPPS15 Plug N’ Plate Power Supply - 300ma, 4.5v $15.00

PNPPS1515 Plug N’ Plate Power Supply - 300ma, 1.7v (Silver Plating Only) $15.00

PNPNS9 8 oz Plug N’ Plate Nickel Solution $10.00

PNPTN9 8 oz Plug N’ Plate Tin Solution $10.00

PNPCS9 8 oz Plug N’ Plate Copper Solution $10.00

BLKR8 8 oz Plug N’ Plate Black Krome™ Solution $10.00

PNPCC9 8 oz Plug N’ Plate Copy Chrome™ Solution $10.00

PNPBS12 4 oz Plug N’ Plate Brass Solution $14.00

PNPS12 4 oz Plug N’ Plate Silver Solution $15.00

PNPG12 4 oz Plug N’ Plate Gold Solution $20.00

PNPBZ8 8 oz Plug N’ Plate Bronze Solution $10.00

PNPSSACT 8 oz Stainless Steel Activator $9.00

STRP5 8 oz Chrome Stripper (requires stainless wand) $5.00

WANDS4 Stainless Steel Wand $5.00

WANDC4 Copper Wand $5.00

WANDB4 Brass Wand $5.00

WANDT4 Tin Wand $5.00

BPBAND Brush Plating Wand Bandage $0.05

Electroless Krome™ Plating KitLooks Like Chrome - Not A Yellow Nickel!Hard Like Chrome - Tougher Than Nickel!

Keeps Its Shine - Just Like Chrome!One coat system - eliminates 2 steps!

No Batteries, Rectifiers or Other Power Sources Required

Plates Many Metals - All Steels, Irons, Copper, Brass, Bronze, Titanium, Lead Free Solders, and Nickel Alloys. Pot Metal with Pot Metal Primer Pretreatment. Aluminum With Zincate Pretreatment.

Electroless Krome™ operates in exactly the same manner as our Electroless Nickel kits. Electroless Krome™ is an alloy of nickel and cobalt. The cobalt gives the nickel plate it blue tint, and imparts more hardness to the surface. Applied to a previously polished surface and then buffed lightly, the finish will match most commercial chrome plated pieces.

Mini Kit (Makes 5 Pints):1 Gal Plastic Tank and Lid50W Ceramic HeaterMist Control BallsElectroless Krome™ Con-

centrate - part A 8 ozElectroless Nickel /Krome™

Concentrate - part B 12 oz Electroless Nickel/Krome™

Concentrate - part C 8 oz END Plate out disposal con-

centrate 4 oz2 Steel Plate Out PadsThe Caswell Plating ManualFree Technical Support

Standard Kit (Makes 10 Pints):2 Gal Plastic Tank and Lid50W Ceramic HeaterMist Control BallsElectroless Krome™ Con-

centrate - part A 16 ozElectroless Nickel /Krome™



centrate 4 oz2 Steel Plate Out PadsMeasuring CupThe Caswell Plating ManualFree Technical Support

Deluxe Kit (Makes 2.5 Gals):3.5 Gal Plastic Tank and Lid300W Ceramic HeaterMist Control BallsElectroless Krome™ Con-

centrate - part A 32 ozElectroless Nickel/Krome™




Jumbo Kit (Makes 5 Gal):6 Gal Plastic Tank and Lid300W Ceramic HeaterMist Control BallsElectroless Krome™ Con-

centrate - part A 64 ozElectroless Nickel/Krome™




EK1 ELECTROLESS KROME™ KIT MINI $70.00

EK2 ELECTROLESS KROME™ KIT STANDARD $145.00

EK3 ELECTROLESS KROME™ KIT DELUXE $285.00

EK4 ELECTROLESS KROME™ KIT JUMBO $420.00

Wheel Chroming KitPlating a wheel with a real chrome plate requires a power supply so large that it is impractical for most small scale plating operations. Our Copy Chrome™ system requires much less power than a real chrome plate. Now you can plate aluminum wheels easily. Ships 2-3 weeks after ordering.

The kit contains:

1 Degreasing tank (Size: 12” Width x 24” Length x 24” Height)1 Zincate tank (Size: 12” Width x 24” Length x 24” Height)1 Flash Copper™ Plating Tank (Size: 18” Width x 24” Length x 24” Height)1 Copy Chrome™ tank (Size: 18” Width x 24” Length x 24” Height)3 x 110V 1000 Watt Titanium Heaters2 Rinse Tanks (Size: 12” Width x 24” Length x 12” Height)2 Copy Chrome™ Anodes (18” x 18”)2 Copper Anodes (18” x 18”)FLASH COPPER™ concentrate makes 35 GalsCOPY CHROME™ concentrate makes 35 GalsSP Degreaser concentrate makes 20 GalsZincate concentrate makes 20 gals1 x 60 amp Rectifier 110 voltsThe Caswell Plating ManualFree Technical Support

WHCHROME WHEEL CHROMING KIT 35 GAL $3450.00

Boron Nitride Electroless KitBN EN is an extremely slick, abrasion resistant, low-friction, high lubricity coating. Ideal for all types of guns, engine pistons, fry pans, in fact anywhere where dry lubrication and non-stick is an issue. We see interesting potential in lining parts of Paintball Guns to prevent wear of the soft aluminum.

The coating can be applied in 20 minutes, to aluminum, steel, nickel, copper, brass and bronze. Other metals can be treated as long as a nickel plate is previously applied. Where corrosion may present a problem (such as on steel) the part should be previously plated with at least 0.0002” of Electroless Nickel plate. Generally gun components can be plated directly without a base primer of nickel.

The coating is applied at 0.0002” in 20 minutes. The system runs exactly the same as Caswell Electroless Nickel, except that it has a special filter pump, which agitates the Boron Nitride powder, keeping it in suspension. . The pump has a plastic tube, which should be secured to the pump body aiming the jet towards the bottom center of the tank. As the nickel is plated onto the surface, the minute particles of Boron Nitride are bonded all over the surface of the nickel, giving the part unique properties.

After plating, the pump should be left to run until the solution temperature has reached ambient again. At this point the plating reaction ceases. Failure to do this will result in the BN particles dropping to the bottom of the tank, where they will be plated into a solid mass. This will ruin both the particles and the solution. The bath must be maintained at between 70-105% nickel content by replenishing with Part A & Part C.

The BN Particles are slowly depleted from the solution. However, there will always be about 50% of these left over after 5 nickel replenishments. To recover the BN particles, the solution may left idle for 3-5 days and they will settle on the bottom. The spent solution may be carefully siphoned or decanted off and the BN particles may be re-used if they are free from nickel. For high output users, this may be an economical saving, as BN particles are a major expense of the kit. There is a special retrieval procedure involving nitric acid, which will remove the nickel. This information is available on request.

The BN EN finish has a satin look to it.

1.5 Gal Kit:1 x 2 gal Plating tank & lid1 x Filter pump 1 x pump tube1 x 16 oz Part A Concentrate1 x 24 oz Part B Concentrate1 x 16 oz Part C Concentrate1 x 210°F x 300 Watt Heater1 x 16 oz Boron NitrideInstructions

3 Gal Kit:1 x 3.5 gal Plating tank & lid1 x Filter pump 1 x pump tube1 x 32 oz Part A Concentrate1 x 48 oz Part B Concentrate1 x 32 oz Part C Concentrate1 x 210°F x 300 Watt Heater2 x 16 oz Boron NitrideInstructions

4.5 Gal Kit:1 x 6 gal Plating tank & lid1 x Filter pump 1 x pump tube2 x 32 oz Part A Concentrate1 x 96 oz Part B Concentrate2 x 32 oz Part C Concentrate1 x 210°F x 300 Watt Heater4 x 16 oz Boron NitrideInstructions

BNEN1 BORON NITRIDE ELECTROLESS KIT 1.5 GAL $195.00

BNEN2 BORON NITRIDE ELECTROLESS KIT 3 GAL $395.00

BNEN3 BORON NITRIDE ELECTROLESS KIT 4.5 GAL $595.00

Lead Free SolderThe ideal solder for a plating application. Lead free solder allows for easy nickel or copper plating over the solder. It is also excellent for use in any soft solder applications. It does not contain any lead, antimony or zinc. Free flowing and produces a bright white finish.

Flows faster and at a lower temperature allowing deeper penetration and quicker set than any other lead free solder. Melts and flows better than any 50/50 tin-lead and is mechanically stronger than 95/5 tin-antimony solder.

Meets all Federal, State and Municipal specifications applying to Lead Free soldersTensile strength 7130 psiShear strength 5970 psiElongation 19.1%Brinnel hardness 15.1Bursting Strength End cap soldered on 12” length of 1/4” copper tubing 5800 psiMelting range 409-419°F

LFS23 LEAD FREE SOLDER 1 LB $14.25

FastGold Brush PlatingFastGold is a new highly concentrated brush plating solution, designed especially for use with all types of brush plating machines, including pen platers.

FastGold contains over 1 pennyweight of gold per 4oz of solution, (2 troy oz per gallon) which enables the solution to plate an even layer of gold as quickly, if not more quickly, than any cyanide based product.

FastGold plates quickly even in cold weather – less than one minute for most articles!

FastGold deposits over nickel, sterling silver, silver plate, gold, rhodium, and most other similar metals. Copper alloys and steel should be flash plated with nickel prior to gold plating.

Eliminate nickel plating steps and plate gold directly onto stainless steel parts using our Stainless Steel Activator for Gold. Etch with this product, then plate gold directly onto stainless parts.

FSTGLD4 24CT FASTGOLD BRUSH PLATING 4 OZ $93.50


FSTGLD16 24CT FASTGOLD BRUSH PLATING 1 PINT $292.00

FSTGLD32 24CT FASTGOLD BRUSH PLATING 2 PINTS $549.00



FSTGLD1816 18CT FASTGOLD BRUSH PLATING 1 PINT $292.00

FSTGLD1832 18CT FASTGOLD BRUSH PLATING 2 PINTS $549.00

SSAG1 STAINLESS STEEL ACTIVATOR FOR GOLD 1 QUART $35.00

CAB10 CABOSIL GELLING POWDER - MIX WITH 1 QT 0.1LB $10.00

FastGold’s evenness of color is easy to control, thanks to special brighteners which help provide excellent coverage and leveling ability. FastGOLD is the longest lasting and most durable gold money can buy!

FastGOLD is more reflective than ordinary gold, because it applies to the substrate in flat ‘platelets’ rather than in the granular structure of cyanide plating solutions.

Plating Gold Onto Stainless Steel?

Professional Brush Plating SystemUnlike competitors ‘pulse platers’, this machine is infinitely variable to allow the user to alter current or voltage to suit a variety of plating techniques and solutions. So, immersion and brush plating can be done with this system.

Fastgold is a 24-carat hardened gold, designed particularly for the aggressive environment that car emblems are subjected to. It is cyanide free and has the advantage of coming in liquid form, which can be gelled using the gelling powder included in the kit. The nickel substrate found once the chrome stripper is used, does not need to be activated to use Fastgold, saving a step over competitive systems.

The Flash Copper solution is ideal for plating over old pot metal emblems, where pitting or corrosion

has eroded the nickel base and exposed the pot metal. After applying Flash Copper to the pot metal, nickel can be applied prior to gold plating. Copy Chrome may also be applied over a nickel base, to give it that ‘bluer’ chrome appearance. Black Krome™, applied over a nickel base, will give that ‘smoked chrome’ appearance that is so popular today. • 1 x 3 amp Constant Current Power Supply 110volt input • 1 x wand kit comprising: 2 x 4 feet connecting wires (red & black) 3 Banana plugs (2 red, 1 black) 1 alligator clip (black) 3 Stainless Brush Plating wands & bandages • 1 Copper Brush Plating Wand & bandage • 1 x 4oz 24-carat Fastgold (plates approx 2-3 sq ft) • 1 x 4oz Gelling Powder • 1 x 8 oz PNP Nickel Plating solution • 1 x 8oz PNP Flash Copper Plating solution • 1 x 8oz PNP Copy Chrome Plating solution • 1 x 8oz Black Krome™ Plating solution • 1 x 8oz Chrome Stripper • Brush Plating Instructions

PGS1 PROFESSIONAL BRUSH PLATING SYSTEM $265.00

Gold Tank PlatingWork safely with cyanide free gold to plate jewelry, flatware, baby shoes, flowers, bathroom fittings and much more.

Caswell 24ct Gold is ideal for immersion plating of larger items. For brush plating applications, please use our FastGold system.

Certainly, tank-plating gold requires much less supervision and effort than brush plating. 24Ct Gold plates @ 2 micro inches per minute using approx 3 volts. Plating time is 30-60 seconds, to provide a durable decorative finish.

An application of a VHT Clear Lacquer or Collinite Wax over a plated item will increase its wear, reduce water spotting and enhance the gold’s color.

Cyanide free solution eliminates the dangers of deadly poisoning from ingestion through the skin or from the production of cyanide gas.

The system operates with either stainless steel anodes, or 24 carat gold anodes. Gold anodes prolong the life of the solution, but are obviously very expensive.

Caswell 24ct Gold will plate directly onto tin, copper, brass, bronze, nickel, silver and most lead free solders. Some alloys must be copper or nickel plated first. Steel must be nickel plated first.

The system contains 2 pennyweights gold per US Gallon of solution.

Trying to match existing gold supplied by another company is difficult as shades may vary. (It is better to lightly recoat the old gold with a new layer)

Plating Gold Onto Stainless Steel?

Eliminate nickel plating steps and plate gold directly onto stainless steel parts using our Stainless Steel Activator for Gold. Etch with this product, then plate gold directly onto stainless parts.

1 Gallon Kit:1 x 300ma Power Supply (plates up to 20 sq”)1 Gallon 24 ct Gold Solution1 x Tank Heater1 x 2 gal tank with lid2 x Stainless Steel AnodesThe Complete Plating ManualFree Technical Support

2 Gallon Kit:1 x 300ma Power Supply (plates up to 20 sq“)2 Gallons 24 ct Gold Solution1 x Tank Heater1 x 3.5 gal tank with lid2 x Stainless Steel AnodesThe Complete Plating ManualFree Technical Support

GPS54 24CT GOLD TANK PLATING SOLUTION 1 PINT $54.00

GPS85 24CT GOLD TANK PLATING SOLUTION 1 QUART $85.00

GPS5215 24CT GOLD TANK PLATING SOLUTION 1 GALLON $215.00

GPS5395 24CT GOLD TANK PLATING SOLUTION 2 GALLONS $395.00

GLD250 24CT GOLD TANK PLATING KIT 1 GALLON $250.00

GLD415 24CT GOLD TANK PLATING KIT 2 GALLON $415.00

GLDANOD24 24CT GOLD ANODE 1” X 1” $60.00

SSANODE STAINLESS STEEL ANODE 4” X 8” $7.00

SSAG1 STAINLESS STEEL ACTIVATOR FOR GOLD 1 QUART $35.00

ANSTP1G ANODIZE & CHROME STRIPPER 3 GALLONS $38.00

ANSTP4OZ ANODIZE & CHROME STRIPPER 8 OZ $3.00

Chrome stripping involves reverse plating the chrome using a power supply, chrome stripper and GP Plates or Stainless Wand.

Related Products: Fast Gold - Page 26 Silver Plating Kit - Page 20

Black Krome™ Plating KitThis spectacular product will add style and elegance to many products. Ideal for vehicle trim, guns, musical instruments, fishing lures, etc.

The system plates within a couple of minutes over a nickel or copper base. To plate over chrome, the existing chrome plate must be removed by stripping with Anodize & Chrome Stripper.

Black Krome™ can be plated by brush plating or by an immersion technique. For brush plating, a 4.5 volt power supply and a stainless steel wand is required. For tank (immersion) plating, the solution is best used at 100-120°F, using a stainless steel anode. Because the plate is derived from the solution and not the anode, the solution will need to be replaced periodically.

When plating over nickel, the color will have a metallic smoky black look, whereas over copper, a darker black will be achieved. The finish should be waxed with Collinite Insulator or Metal Wax.

1 Gallon Kit:

1 x 2 Gal Tank & Lid1 x Stainless Steel Anode1 Gal Black Krome™ Solution1 x 300 Watt 110°F HeaterInstructionsFree Technical Support

2 Gallon Kit:

1 x 3.5 Gal Tank & Lid2 x Stainless Steel Anodes2 Gal Black Krome™ Solution1 x 300 Watt 110°F HeaterInstructionsFree Technical Support

4 Gallon Kit:

1 x 5 Gal Tank & Lid2 x Stainless Steel Anode4 Gal Black Krome™ Solution1 x 300 Watt 110°F HeaterInstructionsFree Technical Support

BLKR1G BLACK KROME™ PLATING KIT 1 GAL $105.00

BLKR2G BLACK KROME™ PLATING KIT 2 GAL $195.00

BLKK4G BLACK KROME™ PLATING KIT 4 GAL $270.00

BLKR8 BLACK KROME™ PLUG N’ PLATE™ SOLUTION 8OZ $10.00

BKS1G BLACK KROME™ SOLUTION 1 GAL $100.00

Tin Plating KitIdeal for model Tin-ware Trains, antique tin-ware, Cooking Utensils, Electronics,

Buss Bars, Tools and much more

Tin is a very commonly used metal for the protection of steel. It is used extensively in the food trade because of its non-toxic qualities. Tin is a bright, shiny material, and has excellent soldering capabilities, making it ideal for all electrical connection applications. Caswell’s Tin Plating kit will plate directly over, copper, steel, brass, bronze. Other ‘difficult’ metals such as pot metal, will require a coat of Flash Copper™ first.

Average thickness is typically 0.0002-3” (0.10” in 10 mins). Setup involves mixing 3 quarts of battery acid into 6 quarts of distilled water, then adding one unit of Tin Concentrate. Double these quantities for the 4 gal kit. The Caswell

Tin Plating System is a stable bath, which deposits a leveled, brilliant plate with excellent soldering capabilities. It has a wide operating range in regard to concentration and operates well with low tin concentration.

1.75 Gallon Kit:2 x 3.5 Gal Tank with Lids2 x Tin Anodes 4” x 8”1 Quart Tin Concentrate Part A1 Pint Tin Activator1 x 300 Watt 110°F Heater (for heating)1 x 300 Watt 210°F Heater (for degreasing)2 Gal SP DegreaserThe Caswell Plating ManualFree Technical Support

5.25 Gallon Kit:2 x 6 Gal Tank with Lids2 x Tin Anodes 4” x 8”3 Quarts Tin Concentrate3 Pints Tin Activator1 x 300 Watt 110°F Heater (for heating)1 x 300 Watt 210°F Heater (for degreasing)4 Gal SP DegreaserThe Caswell Plating ManualFree Technical Support

TPK2 TIN PLATING KIT 1.75 GAL $147.00

TPK4 TIN PLATING KIT 5.25 GAL $299.00

TINAN TIN ANODE 4” X 8” $22.00

TINCON2 TIN PLATING CONC. (1 QT: 1 PINT ACT) MAKES 1.75 GAL $35.00

TINACT1P TIN ACTIVATOR - 1 PINT $20.00

SilverplaterA great new way to re-silver:

Headlight reflectors, knobs, bezels, ornaments, flatware, contacts, etc, etc.

For old silver objects, simply apply a small amount of SILVERSMITH or SILVERPLATER to a soft cloth, and rub gently. The part will be etched clean and plated with a substantial layer of SILVER within a matter of seconds, as you polish. Rinse in fresh water and dry with a clean soft cloth.

SILVERSMITH or SILVERPLATER can be applied to surfaces made, or plated with, nickel, copper, bronze, brass, zinc. It will NOT work on base metals such as steel and aluminum. (But you could plate these with nickel first). The part should be highly buffed and polished before application.

As this is a real silver plate, it will tarnish gradually as with normal silver plate. A light rub over with a small quantity of SILVERSMITH or SILVERPLATER will soon restore the shine. Reflectors should last several years before needing a further application. Unlike metal polishes, SILVERSMITH or SILVERPLATER actually applies more metal each time you use it. Made with 99.99% pure silver.

SILVERSMITH contains cyanide and can only be sold to businesses.SILVERPLATER is cyanide free, and works just as well as SILVERSMITH. The silver is applied more slowly.

SLVRSM26 SILVERSMITH 4 OZ $29.00

SLVRPL26 SILVERPLATER 4 OZ $29.00

The Caswell Plating ManualVersion 7 of The Caswell Plating Manual is without doubt, the most advanced ‘how to’ plat-ing book available today. Containing over 150 pages, it specifically addresses the problems of plating on a small scale, and wherever possible employs the “Keep It Simple” formula. Standard plating techniques such as nickel and copper plating have been upgraded, and there are many systems discussed, such as ‘hard’ chrome plating, electroless plating and aluminum anodizing.

Instructions for each plating process are now accompanied by a easy to follow chart, illustrat-ing the steps involved.

Detailed instructions on how to hard chrome plate tool tips, gives the novice a completely new perspective to his workshop. The anodizing section shows how to ‘splash color’ anodize (just like the way paint ball guns are done), using a new range of Caswell dyes.

There is an excellent section on bronzing things like baby shoes, and another on plating glass tableware. Brush plating with Plug N’Plate™ kits is an inexpensive technique for doing small

local repairs or to gold plate those car emblems, or that old fob watch.

New antiquing solutions provide a whole spectrum of effects for the restorer, including a new safe zinc and Copy Cad™ black-ener. There is even an old fashioned steel blackener formula which uses walnut shells.

Chrome and Anodize stripping techniques are thoroughly discussed, as are new concepts for plating lead work, which is must for fishing lures, sun catchers and stained glass manufacture.

Finally a whole chapter on environmental issues., demonstrates the effective reduction of waste, its disposal and emissions, and the EPA requirements.

The cost of the manual is refundable when you purchase any plating kit that contains the manual.

CPM25 THE CASWELL PLATING MANUAL $20.00

Add $5.00 for priority mail postage.

Brass Plating KitCaswell Brass Plating Solution is a unique cyanide-free alkaline brass plating system which plates a true 70/30 yellow-green plate directly onto steel and bright nickel plated surfaces. It can be used for heavy brass plating which will be antiqued (oxidized and relieved). It may also be used for decorative heavy brass if the surface is burnished or buffed and colored with a wheel to remove the slight haze and reveal the true rich brass color for lamp parts, hardware and plumbing fixtures.

To plate on zinc die cast surfaces, you must plate with Flash Copper™ first.

The system eliminates carbonates. Therefore, there is no carbonate sludge containing cyanide to be disposed of.

The mixed solution may be used to tank or brush plate.

Brass tank plating requires an average current of 0.02-0.1 amps per sq. in. and operates in the range of 3-12 Volts. Brass Plating is available on a small scale using Plug N’ plate kits.

1 Gallon Kit:1 x 2 Gal Tank and Lid2 x Brass Anodes (4” x 8”)1 x 300 Watt 110°F Heater4 Quarts Brass Solution Part A2 x 4oz Brass Solution Part BThe Caswell Plating ManualFree Technical Support

2 Gallon Kit:1 x 3.5 Gal Tank and Lid2 x Brass Anodes (4” x 8”)1 x 300 Watt 110°F Heater8 Quarts Brass Solution Part A4 x 4oz Brass Solution Part BThe Caswell Plating ManualFree Technical Support

4 Gallon Kit:1 x 5 Gal Tank and Lid2 x Brass Anodes (4” x 8”)1 x 300 Watt 110°F Heater16 Quarts Brass Solution Part A8 x 4oz Brass Solution Part BThe Caswell Plating ManualFree Technical Support

BRP165 BRASS PLATING KIT 1 GAL $165.00



BRSA1Q BRASS PLATING SOLUTION PART A (1QT A:2OZ B)DO NOT DILUTE

1 QUART $35.00

BRSB2OZ BRASS PLATING SOLUTION PART B 2 OZ $5.00

BRBP59 BRASS BRUSH PLATING SOLUTION 1 QUART $59.00

Triple Chrome Plating VideoYou’ve been asking for it and now it’s here...our first video of many that covers setup and operation of our Triple Chrome Plating Kit.

This approximately 30 minute video covers everything you need to know to operate our Triple Chrome system, including: • Safety • Workshop & Tank Setup • Surface Preparation • Power Supplies • Controlling the Power • Operating The Plating Tanks

The video serves as an excellent training video, thanks to the mix of live video and animated tutorials that help explain each step of the process in easy to understand terms. It also walks viewers through a basic training process, by plating small pieces of copper pipe.

It is the perfect companion to our Caswell Plating Manual. Order both and save.

TCVID TRIPLE CHROME PLATING VIDEO $35.00

TCVIDMC VIDEO & MANUAL COMBO. SAVE $5 $49.99

Hard Chrome Plating KitChrome plating can be used for two purposes:

A. Hard Chrome PlateUsually used to build up shafts or areas on steel that are subject to severe wear. The hard chrome plating process can take several hours to build up. The procedure is discussed extensively in The Complete Plating Manual, paying particular attention to the hard tipping of cutting tools.

B. Decorative Chrome PlateMost chrome plate is considered ‘decorative’. It is a very thin layer, approx. 1/100th the thickness of a human hair, which is applied over a NICKEL plate. Chrome offers NO corrosion resistance, as it is porous, so the nickel does all the protection. The chrome merely gives the nickel a ‘blue’ look, and stops it tarnishing. Decorative chrome plate can be considered a ‘clear coat’ over the nickel ‘paint job’. This chrome plating kit is NOT capable of decorative chrome plating. If you are interested in decorative chroming, you’ll likely want to purchase our Triple Chrome Plating Kit.

Unlike nickel and copper plating, chrome uses a high current of one amp per square inch of surface area to be plated. This makes the larger operations, such as plating bumpers and some wheels, more impractical for the smaller workshop. However, repairs to existing chrome plate can be carried out using this kit in conjunction with a home made brush plating wand.

You can chrome plate with a 6 or 12 volt battery, or charger, but if larger parts are involved, you may need to use 2 batteries. The higher amperage required can also be controlled by the inexpensive construction of a ‘salt water rheostat’, a device made from a plastic tank, some salty water and 2 metal plates. Full instructions are in the Complete Plating Manual.

Acid mist is produced during the chrome plating process from the vigorous action of the higher current used. This mist could be compared to dropping several ‘Alka Seltzers’ into water, and needs to be controlled by either making a small fume hood, (a cooking stove hood is ideal) or wearing a respirator fitted with ‘Acid Gas’ cartridges. Fume Control Balls and chemical mist suppressant are supplied with the kit to reduce this problem.

The Chrome Crystals supplied with the kit contain sufficient chrome to plate over 1000 square feet of chrome plate per gallon of made up solution. You should never need to replace this material. The Chrome is removed from the Chromic Acid solution, and the anodes are not sacrificed. It is unnecessary to replace these anodes. Should you ever wish to dispose of the solution, we can supply you with a chemical to make the Chromic Acid solution safe to dispose in the drains.

1 Gallon Kit:1 x 2 Gallon Plating Tank, lid & locking

ring1 Gal Chrome Crystals1 x 12”x12” Chrome AnodeMist Control BallsMist Suppressant1 x 300 Watt 110°F HeaterThe Caswell Plating ManualFree Technical Support

2 Gallon Kit:1 x 3.5 Gallon Plating Tank, lid &

locking ring2 Gals Chrome Crystals2 x 12”x12” Chrome AnodesMist Control BallsMist Suppressant1 x 300 Watt 110°F HeaterThe Caswell Plating ManualFree Technical Support

4 Gallon Kit:1 x 5 Gallon Plating Tank, lid & locking

ring4 Gals Chrome Crystals2 x 12”x12” Chrome AnodesMist Control BallsMist Suppressant1 x 300 Watt 110°F HeaterThe Caswell Plating ManualFree Technical Support

CHRPK1G HARD CHROME PLATING KIT 1 GAL $95.00



Related Products: Triple Chrome Plating Kit - Page 10

15 Gal Triple Chrome Plating KitThis kit has been especially designed for the smaller workshop requiring high quality Chrome plating facilities for small to medium sized parts.

It is ideally suited to operate as a small business venture, plating automotive and motorcycle parts.

The kit is supplied with 2 rectifiers, the smaller one, a 25 amp capacity, is designed to operate the copper and nickel plating tanks, with a maximum capacity of approx 300 sq. inch surface area.

Amperage requirements for copper and nickel plating are approximately 1 amp per 15 square inches of surface area.

The larger rectifier, supplied by Aldonex Inc, is a 250 amp capacity, specifically designed to control the higher demands of the Chrome Plating tank.

Amperage requirements of chrome plating are 1+ amps per square inch of surface area.

The 5 tanks supplied are constructed of HDPE, a chemical

resistant plastic. They come with a lid and a metal locking ring to ensure tanks are completely safe and sealed when not in use. Dimensions are:- 21” diameter 19” depth.

Each plating tank has different heating and chemical resistance requirements, so a variety of heaters are supplied with the kit. These all operate at 110 volts.

The Kit Contains:-

1 x 250 Amp Rectifer (Plates items up to 225 sq in)1 x 25 Amp Rectifier6 x 20 gal Plastic Plating tanks with locking lids2 x 18” x 20” Nickel Anodes and bandages2 x 18” x 20” Copper Anodes and bandagesFlash Copper™ Part A - 20 QuartsFlash Copper™ Part B - 5 QuartsFlash Copper™ Part C - 5 Quarts2 x 8” x 18” GP Plates4 x 12” x 12” Chrome Anodes10 Packs Nickel Crystals with Brightener (Makes 15 Gals) 10 Packs Copper Crystals with Brightener (Makes 15 Gals) 10 Cans Chrome Crystals with Catalyst (Makes 15 Gals) SP Degreaser 8 lb (makes 16 gals)6 Filter/Agitator Pumps (2 Each For Nickel, Copper & Flash Copper™ systems)The Caswell Plating ManualFume Control Balls2 x 1000 watt Titanium Heaters1 x 1000 watt Quartz Heater with guard1 x 1000 watt Stainless Heater4 Control Boxes

Heaters and control boxes have a 6 months warranty. Rectifiers have a 1 year warranty.

Shipped by Common Carrier. Dangerous Goods Charge will be added to your order. Call for details.

TCR16G TRIPLE CHROME PLATING KIT 15 GAL $6250.00

Related Products: Triple Chrome Plating Kit - Page 10 Wheel Chroming Kit - Page 24

Plating Combo KitsMany of our customers have started out with a small plating kit, and wanted to upgrade it. These combination kits allow you to add on to existing setups and give you a few other alternatives. Remember to tell us if you don’t need another plating manual, and we will then discount the price by $20.00.

Nickel/Copper Combo Kits1.5 Gallon Kit:3 x 2 Gal Plating Tanks & Lid2 x 6” x 8” Nickel Anodes

and Bandages1 Pack Nickel Crystals with

Brightener (Makes 1.5 Gals)2 x Copper Anodes 4” x 8”


(Makes 1.5 Gals)1 x 4oz Copper Brightener1 Pack SP Degreaser (Makes

2 Gals)2 x 110°F Heaters (for plat-

ing)1 x 210°F 300W Ceramic

Heater (for degreasing)2 x Pump Filter/AgitatorsThe Complete Plating

ManualFree Technical Support


Lid2 x 6” x 8” Nickel Anodes

and Bandages2 Packs Nickel Crystals with

Brightener (Makes 3 Gals)2 x Copper Anodes 4” x 8”


(Makes 3 Gals)2 x 4oz Copper Brightener2 Packs SP Degreaser

(Makes 4 Gals)2 x 110°F Heaters (for plat-




4.5 Gallon Kit:3 x 6 Gal Plating Tanks & Lid2 x 6” x 8” Nickel Anodes




(Makes 4.5 Gals)3 x 4oz Copper Brightener2 Packs SP Degreaser






Lids2 x 18” x 20” Nickel Anodes

and Bandages10 Packs Nickel Crystals

with brighteners (Makes 15 Gals)2 x Copper Anodes 18” x

20” and bandages10 Packs Copper Crystals

(Makes 15 Gals)10 x 4oz Copper Brightener8 Packs SP Degreaser

(makes 16 Gals)6 x 110°F Heaters3 x 210°F 300W Ceramic

Heaters2 x Pump Filter/AgitatorsThe Complete Plating


NCUC1 NICKEL/COPPER COMBO KIT 1.5 GAL $189.00

NCUC2 NICKEL/COPPER COMBO KIT 3 GAL $319.00

NCUC3 NICKEL/COPPER COMBO KIT 4.5 GAL $424.00

NCUC4 NICKEL/COPPER COMBO KIT 15 GAL $1149.00

Nickel/ Flash Copper™ Combo Kits1.5 Gallon Kit:3 x 2 Gal Plating Tanks & Lid2 x 6” x 8” Nickel Anodes

and Bandages1 Pack Nickel Crystals with


and bandagesFlash Copper™ Part A - 2

QuartsFlash Copper™ Part B - 1


Pint1 Pack SP Degreaser (Makes








Brightener (Makes 3 Gals)2 x Copper Anodes 4” x 8”



Quart Flash Copper™ Part C - 1

Quart2 Packs SP Degreaser











pints 2 Packs SP Degreaser







and Bandages10 Packs Nickel Crystals

with brighteners (Makes 15 Gals)2 x Copper Anodes 18” x

20” and bandagesFlash Copper™ Part A - 20



Quarts(makes 16 Gals)6 x 110°F Heaters3 x 210°F 300W Ceramic



NFC1 NICKEL/FLASH COPPER™ COMBO KIT 1.5 GAL $179.00

NFC2 NICKEL/FLASH COPPER™ COMBO KIT 3 GAL $309.00

NFC3 NICKEL/FLASH COPPER™ COMBO KIT 4.5 GAL $414.00

NFC4 NICKEL/FLASH COPPER™ COMBO KIT 15 GAL $1139.00

Plating Combo KitsNickel/Chrome Combo Kits1.5 Gallon Kit:3 x 2 Gal Plating Tanks & Lid2 x 6” x 8” Nickel Anodes and Ban-

dages1 Pack Nickel Crystals with Brightener

(Makes 1.5 Gals)2 x 12” x 12” Chrome Anodes1 Can Chrome Crystals (Makes 1.5

Gals)Chrome Activator Mist Control Balls1 Pack SP Degreaser (Makes 2 Gals)2 x 110°F Heaters (for plating)1 x 210°F 300W Ceramic Heater (for

degreasing)1 x Pump Filter/AgitatorThe Complete Plating ManualFree Technical Support

3 Gallon Kit:3 x 3 Gal Plating Tanks & Lid2 x 6” x 8” Nickel Anodes and Ban-

dages2 Packs Nickel Crystals with Brightener

(Makes 3 Gals)2 x 12” x 12” Chrome Anodes2 Cans Chrome Crystals (Makes 3

Gals)Chrome Activator Mist Control Balls2 Packs SP Degreaser (Makes 4 Gals)2 x 110°F Heaters (for plating)1 x 210°F 300W Ceramic Heater (for


4.5 Gallon Kit:3 x 6 Gal Plating Tanks & Lid2 x 6” x 8” Nickel Anodes and Ban-

dages3 Packs Nickel Crystals with Brightener

(Makes 4.5 Gals)2 x 12” x 12” Chrome Anodes3 Cans Chrome Crystals (Makes 4.5

Gals)Chrome Activator Mist Control Balls2 Packs SP Degreaser (Makes 4 Gals)2 x 110°F Heaters (for plating)1 x 210°F 300W Ceramic Heater (for


NCHC1 NICKEL/CHROME COMBO KIT 1.5 GAL $199.00

NCHC2 NICKEL/CHROME COMBO KIT 3 GAL $349.00

NCHC3 NICKEL/CHROME COMBO KIT 4.5 GAL $469.00

Copy Chrome™/ Flash Copper™ Combo Kits1.5 Gallon Kit:3 x 2 Gal Plating Tanks & Lid2 x 6” x 8” Nickel Anodes

and Bandages1 Pack Copy Chrome™ Crys-

tals with Brightener (Makes 1.5 Gals)2 x Copper Anodes 4” x 8”




Pint1 Pack SP Degreaser (Makes







and Bandages2 Packs Copy Chrome™

Crystals with Brightener (Makes 3 Gals)2 x Copper Anodes 4” x 8”



Quart Flash Copper™ Part C - 1

Quart2 Packs SP Degreaser







Crystals with Brightener (Makes 4.5 Gals)2 x Copper Anodes 4” x 8”




pints 2 Packs SP Degreaser








Crystals with brighteners (Makes 15 Gals)2 x Copper Anodes 18” x

20” and bandagesFlash Copper™ Part A - 20



Quarts(makes 16 Gals)6 x 110°F Heaters3 x 210°F 300W Ceramic



CCFC1 COPY CHROME™/FLASH COPPER™ COMBO KIT 1.5 GAL $189.00

CCFC2 COPY CHROME™/FLASH COPPER™ COMBO KIT 3 GAL $319.00

CCFC3 COPY CHROME™/FLASH COPPER™ COMBO KIT 4.5 GAL $424.00

CCFC4 COPY CHROME™/FLASH COPPER™ COMBO KIT 15 GAL $1149.00

Plating Combo KitsCopper/Chrome Combo Kits1.5 Gallon Kit:2 x 2 Gal Plating Tanks & Lid2 x Copper Anodes 4” x 8” and ban-

dages1 Pack Copper Crystals (Makes 1.5

Gals)1 x 4oz Copper Brightener2 x 12” x 12” Chrome Anodes1 Can Chrome Crystals (Makes 1.5

Gals)Chrome Activator Mist Control Balls2 x 110°F Tank Heaters1 x Pump Filter/AgitatorThe Complete Plating ManualFree Technical Support

3 Gallon Kit:2 x 3.5 Gal Plating Tanks & Lid2 x Copper Anodes 4” x 8” and ban-

dages2 Packs Copper Crystals (Makes 3

Gals)2 x 4oz Copper Brightener2 x 12” x 12” Chrome Anodes2 Cans Chrome Crystals (Makes 3


4.5 Gallon Kit:2 x 6 Gal Plating Tanks & Lid2 x Copper Anodes 4” x 8” and ban-

dages3 Packs Copper Crystals (Makes 3

Gals)3 x 4oz Copper Brightener2 x 12” x 12” Chrome Anodes3 Cans Chrome Crystals (Makes 3


CCHC1 COPPER/CHROME COMBO KIT 1.5 GAL $199.00

CCHC2 COPPER/CHROME COMBO KIT 3 GAL $349.00

CCHC3 COPPER/CHROME COMBO KIT 4.5 GAL $469.00

Bronze Plating KitOur new bronze plating system provides a beautiful, rich bronze finish without any dangerous cyanides or other hazardous chemicals. The coating is suitable for decorative applications. It will plate over Zinc Castings, Pot Metal, Pewter, Electroless Nickel, Plated Nickel, Copper, Steel, Sintered Metal, Tin, Lead, Stainless Steel and Zincated Aluminum. It is recommended to activate Zinc Castings, Lead and Pot Metal in Pickle #4 prior to plating.

The bronze plating solution comes pre-mixed and ready to use. Plate with stainless steel anodes at 80°F, with 3V and 0.07 Amps per Square Inch.

A 2-3 minute plating time provides a good color, which may then be clear coated for corrosion resistance. If buffing the bronze plate is required, plating time should be increased to 30-40 minutes.

• Non Cyanide, Easy to use Bronze Color and Finish • Decorative Finish • Rapid, Even Deposition • Economical and Easy to Use • Excellent Throwing Power • Soft Finish with Minimum Corrosion Resistance • Good to Polish

1.5 Gallon Kit:2 x 2 Gal Plating Tanks & Lid2 x Stainless Steel Anodes 4” x 8”1.5 Gal Bronze Plating Solution1 x 2 Gal SP Degreaser1 x Plating Tank Heater1 x 300W 220°F Tank Heater1 x Pump Filter/AgitatorThe Complete Plating ManualFree Technical Support

3 Gallon Kit:2 x 3.5 Gal Plating Tanks & Lid2 x Stainless Steel Anodes 4” x 8”3 Gal Bronze Plating Solution1 x 4 Gal SP Degreaser1 x Plating Tank Heater1 x 300W 220°F Tank Heater1 x Pump Filter/AgitatorThe Complete Plating ManualFree Technical Support

4.5 Gallon Kit:2 x 6 Gal Plating Tanks & Lid2 x Stainless Steel Anodes 4” x 8”4.5 Gal Bronze Plating Solution1 x 4 Gal SP Degreaser1 x Plating Tank Heater1 x 300W 220°F Tank Heater1 x Pump Filter/AgitatorThe Complete Plating ManualFree Technical Support

BZ1 BRONZE PLATING KIT 1.5 GAL $127.00

BZ2 BRONZE PLATING KIT 3 GAL $215.00

BZ3 BRONZE PLATING KIT 4.5 GAL $285.00

BS1 BRONZE PLATING SOLUTION (PRE-MIXED) 1.5 GAL $55.00

BS2 BRONZE PLATING SOLUTION (PRE-MIXED) 5 GAL $199.00

Garage Floor Coating SystemThis revolutionary garage floor coating system is the ultimate in environmentally friendly systems, giving a tough, shiny, durable floor able to withstand oils, gasoline, brake fluids, alcohol, dirt, abrasion and the general abuse given to garage workshop floors.

Caswell Inc has been involved in industrial and vehicle service bay floor coatings for over 20 years, and you’ll find our application ideas and techniques second to none.

Following our simple steps, from surface preparation to application, you’ll easily be able to achieve a truly professional finish that will be the envy of everyone who sees your workshop.

The first step is to ensure the floor is degreased thoroughly. Heavy oils spots are cleaned up with some unique and simple techniques, then the entire floor is washed down with our special degreasing liquid. While still wet, the environmentally friendly acid etch is applied. No dangerous fumes are emitted from this type of “lemon juice” acid. The floor is rinsed off, and puddles etc. mopped up.

Then the first coat of Basecoat color is applied, directly onto the damp floor. This ensures DEEP penetration of this special moisture tolerant epoxy, which cures with incredible bonds overnight. Next, a second coat of basecoat is applied and the Color Flakes are lightly sprinkled into the wet resin. The floor is allowed to dry overnight, and then the final topcoat of Clear Glaze Urethane is applied. This topcoat material is much better than an epoxy as it has incredible abrasion resistance, and a much longer lasting shine. Full instructions come with the kits. Each kit covers approx 500 square feet, or a double car garage.

Available Colors (Choose One Base Coat and Up To Two Chip Colors)

Base Coat Code Color Color Name Chip Color Code

GFB1 Medium Gray GFF1

GFB2 Light Gray GFF2

GFB3 Tile Red GFF3

GFB4 Brown GFF4

GFB5 Tan GFF5

GFB6 Beige GFF6

GFB7 Light Blue GFF7

GFB8 Dark Blue GFF8

GFB9 Green GFF9

GFB10 Black GFF10

Some examples of Mix and Match. Make up your own color scheme! Over 1100 Possible Combinations

Of course, you could skip the flakes and just do the floor in the basic color. It’s up to you!

Tan base, brown & light gray

Tan base, dark & light blue

Blue base, dark blue & gray

Black base, light gray and dark blue

Black base, tile red and light gray

Light blue base, dark blue & light

gray

Green base, dark blue & light gray

Tile Red base, dark blue & light gray

Dark Gray base, dark blue & light

gray

Base Coat Kit Contains:- 1 x 10lb Acid Etch- 1 x 10lb SP Degreaser- 2 x 2 Gal Basecoat (choose color)- 1 x 1.5 Gal Clear Urethane Glaze- Instructions

Dark Blue base, black & light gray

You need to order the Flakes of your choice separately • 1 x 5lb tub will cover approx 250 sq ft. If using just ONE

color it is advisable to get 2 tubs

GFB1 Medium Gray Basecoat Kit $375.00

GFB2 Light Gray Basecoat Kit $375.00

GFB3 Tile Red Basecoat Kit $375.00

GFB4 Brown Basecoat Kit $375.00

GFB5 Tan Basecoat Kit $375.00

GFB6 Beige Basecoat Kit $375.00

GFB7 Light Blue Basecoat Kit $375.00

GFB8 Dark Blue Basecoat Kit $375.00

GFB9 Green Basecoat Kit $375.00

GFB10 Black Basecoat Kit $375.00

GFF1 Medium Gray Chips $45.00

GFF2 Light Gray Chips $45.00

GFF3 Tile Red Chips $45.00

GFF4 Brown Chips $45.00

GFF5 Tan Chips $45.00

GFF6 Beige Chips $45.00

GFF7 Light Blue Chips $45.00

GFF8 Dark Blue Chips $45.00

GFF9 Green Chips $45.00

GFF10 Black Chips $45.00

Mask-It Masking AgentMask-It is a liquid chemical maskant used as a stop off for anodizing, chromate conversion coating and other plating. Mask-It is fast drying (usually an hour at room temperature) and is resistant to most chemical processes normally required to anodize or electroplate.

Mask-It is completely resistant to hot solutions up to 210°F and is tinted green for better scribe line visibility. The cured film is tack free and will not adhere to itself or other parts.

Apply one coat and allow 60 minutes to dry, then apply a second coat and allow 15 minutes to dry before putting into service.

MASKIT MASK-IT 8 OZ $7.00

MASKITQ MASK-IT 1 QUART $19.95

MASKITG MASK-IT 1 GAL $69.95

ZincateYou Can’t Plate Aluminum

WithoutZincate Pre-Treatment For Aluminum

Using CASWELL Zincate Solution, aluminum can be pre-treated, and then plated in one of our plating kits. The problem:- Alu-minum forms an oxide layer the minute it is exposed to air. This presents a problem when plating aluminum, as the oxide layer prevents the plate from sticking. By using the Zincate process as a pre-plate dip, we chemically remove the oxide layer and at the same time, apply a layer of zinc. The zinc protects the aluminum until it is ready to be plated. As the part is lowered into the plating tank, the zinc is etched away by the nickel solution and plating proceeds onto a clinically clean surface.

The process:

Bead blast the part to remove all heavy oxides and contaminants. Buff & polish the part to the required shine. Thoroughly degrease the part in either CASWELL SP Degreaser or a suitable solvent such as acetone or lacquer thinner. Make up the zincate solution by adding 1 liter of concentrate to 3 liters of distilled water. Heat the solution to 75°F Immerse the solution for 15 sec. to 2 minutes. Immersion time will depend on the alloy, zincate condi-tion and temperature.

If the alloy reacts violently with the solution, then shorten the time immersed. If no reaction is visible, then immersion times can be extended.

A uniform gray appearance is usually a sign of a properly zincated surface, however there are cases where a dark, slightly streaked surface is acceptable. As the zincate solution is depleted, there will be a noticeable increase in the gassing. You can replenish the solution by adding about 10% of the Zincate Concentrate, or simply make up a new batch.

Rinse the part and prepare for plating in any of our nickel plating kits.

ZINC85 ZINCATE CONCENTRATE - MAKES 1 QUART 8 OZ $10.00

ZINC1L ZINCATE CONCENTRATE - MAKES 1 GAL 1 QUART $35.00

ZINC20L ZINCATE CONCENTRATE - MAKES 20 GALS 5 GAL $195.00

Sealer ConcentrateSealer Concentrate is a fast drying coating that penetrates porous materials such as cloth, leather, plaster of paris, bone, concrete etc. rendering it non-porous.

The concentrate is thinned with locally purchased lacquer thinner and part is totally immersed in the solution for 15-30 minutes, then allowed to drip dry. A second application several hours later renders the surface completely smooth and non-porous.

To make the part conductive, the part should then be sprayed with Silvaspray. The part is then plated with any of our plating kits.

SEAL45 SEALER CONCENTRATE 1 QUART $45.00

Die Cast Model Plating KitZinc die-castings have, until now, been a difficult material to plate for the small operation. Die-casting manufacturers have used dangerous chemicals and cyanide copper plating systems to clean, prepare and plate the parts, making it almost impossible to do on a small scale.

This new kit has completely resolved this problem, by using a new commercial grade system of etching, cyanide free copper plating, and finally plating with our famous Copy Chrome™ system. The system will also plate pewter, lead, brass, copper, and steel model parts. Previously painted parts should be immersed in any conventional paint stripper to remove all traces of paint.

Kit Contains:1 Quart Flash Copper™ Solution1 Pint Pickle #4 solution1 x Quart Copy Chrome solution1 Pint SP Degreaser solution1 copper plating wand & bandage1 Copy Chrome™ wand & bandage1 x 4” shank mounted Buffing Wheel1 x 5oz tube Flitz Polish1 x large white buffing compound1 x 1.5 volt a/c adapterInstructionsFree Technical Support

Suncatcher Plating KitPlating the came on stained glass objects has historically been a tremendous problem for manufacturers of these products. Lead oxidizes extremely quickly after cleaning, and this prevents optimum adhesion of any plating. Conventional plating shops use cyanides to optimize adhesion and other unpleasant chemicals to remove the oxides.

The new CASWELL SUNCATCHER KIT incorporates the use of two products:

1. PICKLE #4, which readily removes the oxides from lead, pot metal & pewter.2. Flash Copper™ is an alkaline copper priming system which plates directly to lead, steel, pot metal and pewter, ensuring that subsequent plates will adhere correctly.

These systems ensure that a successful primer is applied to 60/40 solder joints, as well as whatever came

system is used, whether it be lead, brass or copper foil. After Flash Copper™ is applied, the part can be ‘antiqued’ using our antiquing solutions or plated with Copy Chrome™. Copy Chrome™ can then be plated with Gold or Silver using Plug N’ Plate™ kits (not included).

1.5 Gallon Starter Kit1 x 1.5 Gal Flash Copper™/Copy

Chrome™ Combo Kit1 x 2lb Pickle #4 (Makes 4 Gal)Free Technical SupportPower Supply and Polishing Tool Not

Included.

3 Gallon Kit1 x 3 Gal Flash Copper™/Copy

Chrome™ Combo Kit1 x 2lb Pickle #4 (Makes 4 Gal)1 x 10 amp Rectifier1 x 2” Shank Mounted Buffing Wheel1 x large White Buffing Compound1 x Die grinderFree Technical Support

4.5 Gallon Kit1 x 4.5 Gal Flash Copper™/Copy

Chrome™ Combo Kit1 x 2lb Pickle #4 (Makes 4 Gal)1 x 10 amp Rectifier1 x 2” Shank Mounted Buffing Wheel1 x large White Buffing Compound1 x Die grinderFree Technical Support

SCPC190 SUNCATCHER PLATING KIT 1.5 GAL $190.00

SCPC675 SUNCATCHER PLATING KIT 3 GAL $675.00

SCPC845 SUNCATCHER PLATING KIT 4.5 GAL $845.00

Parts are first polished to a high shine using the buffing materials, then degreased with the SP Degreaser.

They are then immersed in Pickle #4 solution, then plated with Flash Copper then Copy Chrome.

Finally, a quick polish with the enclosed tube of Flitz will bring the plated finish to a beautiful shine.

DCMPK DIE CAST MODEL PLATING KIT $69.00

Plating Rectifi ers

This precision built rectifi er provides enough power for all plating needs.0 - 12 Volts d.c. 0 - 10 Amps d.c. Continuously variable output control 5 way output terminals 17 lbs. 12”W x 7”H x 6”D

RECT10 10 AMP RECTIFIER $305.00Our most popular model. This heavy duty unit will plate larger items. The extra amperage comes in handy for quick electro stripping. 0 - 12 Volts d.c. 0 - 25 Amps d.c. Continuously variable output control 5 way output terminals 23 lbs. 13”W x 8”H x 8.5”D

RECT25 25 AMP RECTIFIER $315.00

This 25 amp unit features a polarity- reversal switch and extra output terminals to speed between stripping and plating jobs. Especially useful when plating auto accessories.0 -12 Volts d.c. 0 -25 Amps d.c. Continuously variable output control 5 way output terminals Polarity Quickswitch 23 lbs. 13”W x 8”H x 8.5”D

RECT25PS 25 AMP RECTIFIER/STRIPPER $515.00

This super-duty unit provides enough current to chrome plate items up to 50 sq. inches.0 - 12 Volts d.c. 0 - 50 Amps d.c. Continuously variable output control Heavy duty output terminals 50 lbs. 14.25”W x 9.75”H x 14.25”D


Ultra-high output plating unit for the most demanding plating jobs. 0 - 12 Volts d.c. 0 - 60 Amps d.c. Continuously variable output terminals 60 lbs. 18.25”W x 10”H x 10”D


RECT250 250 AMP RECTIFIER - 30A/110V INPUT $2650.00

RECT1006110 100 AMP RECTIFIER - 6V DC/110V 1 PHASE AC $1405.00




RECT10012220 100 AMP RECTIFIER - 12VDC/220V 1 PHASE AC. DIGITAL AMP AND VOLTMETER $2127.00

RECT10012110 100 AMP RECTIFIER - 12VDC/110V 1 PHASE AC. DIGITAL AMP AND VOLTMETER $2088.00

RECT500 500 AMP RECTIFIER - 3 PHASE EITHER 220 VOLT OR 440 VOLT $4500.00

This new system has the latest technology for small plating and anodizing operations. The constant current control is particularly useful for anodizing using the Caswell LCD Anodizing system.Several of our plating sys-tems use small amounts of current, and if plating parts with only a few square inches, this can sometimes be a real problem to obtain accurate current outputs from larger machines. The system will operate comfortably at 1/10 of an amp.

3 AMP:Input voltage: 110 ac 50/60HzLine Regulation: CV < 0.01% +1mVLoad Regulation: CV< 0.01%+3mV(<3A)Ripple & Noise: CV<0.5mVr.m.s (1<3a)Voltage Indication Accuracy: 1%+2 digitsCurrent Indication Accuracy: 2%+ 2 digitsEnvironment: 0-40 deg C

20 AMP:Input voltage: 110 AC 50/60Hz Line Regulation: CV < 0.02% +3mV Load Regulation: CV< 0.02%+10mV(1<=3A) Ripple & Noise: < 9mV Voltage Indication Accuracy: 1%+2 digits Current Indication Accuracy: 2%+ 2 digits Environment: 0-40 deg C

RECT3C 3 AMP CONSTANT CURRENT RECTIFIER $95.00

RECT20C 20 AMP CONSTANT CURRENT RECTIFIER $299.00

Stainless Steel ActivatorStainless Steel requires a strike coat before it can be plated with other finishes.

Use our Stainless Steel Activator product with a nickel anode in an electroplating system.

To activate stainless steel:Mix up 1 gallon of distilled water, 1 pint of muriatic acid and 1 bag of Stainless Steel Activator.Etch with a 50/50 mix of muriatic acid and distilled water. (Always add acid to water to avoid acid splashes)Plate the part in the Stainless Steel Activator solution, with a nickel anode for one minute at room temperature. Use 1 amp per 15 square inches of surface area.

The process is detailed in our Complete Plating Manual.

SSAC2G STAINLESS STEEL ACTIVATOR 1 GAL $38.00

PNPSSACT STAINLESS STEEL ACTIVATOR 8 OZ $9.00

Pickle #4Pickle #4 is a general-purpose metal activator and de-oxidizer containing fluoride. Used at room temperature on steel, copper, brass and zinc.

PICKLE #4 is a free flowing mixture of dry acids and is more convenient and safer to use than liquid mineral acids. It does not produce the undesirable fumes given off with strong acids. It is dissolved in water and used at ambient temperatures to remove light to medium surface rust from steel and to activate steel surfaces prior to blackening with Black Oxide blackening solutions. Heavily rusted surfaces may require elevated temperatures of 150°F to 170°F. No venting required when used at ambient temperatures. It is used following the water rinse after cleaning the steel surfaces with SP DEGREASER.

PICKLE #4 is more moderate in its action on steel surfaces than mineral acids and produces a uniformly active surface.

PICKLE #4 is also used to activate zinc-plated surfaces, die cast zinc surfaces, copper and copper alloy surfaces prior to blackening, oxidizing, antiquing, chromating or other finishing.

EQUIPMENT REQUIREDPICKLE #4 solutions must be contained in acid-resistant tanks and containers. Polypropylene, polyethylene, PVC or rubber-lined steel are suitable. If heaters are required they must be glass or Teflon coated.

SOLUTION MAKE-UP

Metal Action Makeup & Use

Steel Activation 8 oz/gallon30 to 60 second immersion

Rust Removal 16 to 32 oz/gallon2 to 10 minutes immersion

Copper & Alloys Deoxidizing 8 to 16 oz/gallon 30 to 60 seconds immersion

Plated and die cast zincLead/lead solder

Deoxidizing 4 to 8 oz/gallon30 seconds to 2 mins immersion

SOLUTION CONTROLThe strength of the solution is maintained by small periodic additions of PICKLE #4 salts. The solution is dumped only when its effectiveness is diminished by accumulation of metals, dirt, oil, etc.

PIC4 PICKLE #4 2 LBS $13.50

Replenishment ChemicalsPLATING SOLUTIONS

N15C NICKEL PLATING CRYSTALS W/BRIGHTENER 1.5 GAL $50.00

PN15C POT METAL NICKEL PLATING CRYSTALS 1.5 GAL $50.00

CU15C COPPER PLATING CRYSTALS W/BRIGHTENER 1.5 GAL $70.00

C15C DECORATIVE CHROME CRYSTALS W/CATALYST 1.5 GAL $65.00

HCHRC1G HARD CHROME CRYSTALS 1 GAL $45.00

Z15C ZINC/COPY CAD™ CONCENTRATE 1.5 GAL $50.00

CC15C COPY CHROME™ CRYSTALS 1.5 GAL $95.00

FLSA1G FLASH COPPER™ PART A 1 GAL $52.00

FLSA1Q FLASH COPPER™ PART A 1 QUART $35.00

FLSA5G FLASH COPPER™ PART A 5 GAL $225.00

FLSB1G FLASH COPPER™ PART B 1 GAL $51.00

FLSB1Q FLASH COPPER™ PART B 1 QUART $35.00

FLSC1G FLASH COPPER™ PART C 1 GAL $22.00

FLSC1Q FLASH COPPER™ PART C 1 QUART $18.00

ELECA1L ELECTROLESS NICKEL PART A 1 QUART $32.00

ELECA1G ELECTROLESS NICKEL PART A 1 GAL $95.00

ELKRA1L ELECTROLESS KROME™ PART A 1 QUART $35.00

ELKRA1G ELECTROLESS KROME™ PART A 1 GAL $105.00

ELECB1L ELECTROLESS NICKEL/KROME™ PART B 1 QUART $32.00

ELECB1G ELECTROLESS NICKEL/KROME™ PART B 1 GAL $95.00

ELECC1L ELECTROLESS NICKEL/KROME™ PART C 1 QUART $32.00

ELECC1G ELECTROLESS NICKEL/KROME™ PART C 1 GAL $95.00

ALZA1L POT METAL ELECTROLESS NICKEL PART A 1 QUART $35.00

ALZB1L POT METAL ELECTROLESS NICKEL PART B 1 QUART $35.00

ELECEND ELECTROLESS DISPOSAL SOLUTION 4.25 OZ $5.00

SURFACE PREP & ADDITIVES

SPED18 SP DEGREASER 2 GAL $18.00

NKBR10 NICKEL & COPY CHROME BRIGHTENER (TREATS 1.5 GAL) 8 OZ $10.00

CUBR15 COPPER BRIGHTENER (TREATS 1.5 GAL) 4 OZ $10.00

ZNBRADD ZINC BRIGHTENER ADDITIVE (TREATS 2 GAL) 4 OZ $10.00

Plating HardwareANODES

NKANOD20 NICKEL ANODE 6” X 8” $22.00

CUANOD20 COPPER ANODE 4” X 8” $22.00

ZNANOD20 ZINC & COPY CAD™ ANODE 4” X 8” $22.00

GPPL9 GP PLATE 9” X 9” $10.00

GPPL1750 CHROME ANODE 12” X 12” $27.00

SSANODE STAINLESS STEEL ANODE 4” X 8” $7.00

BANOD22 BRASS ANODE 4” X 8” $22.00

ANBAND ANODE BANDAGE $0.20

TANKS & HEATERS

PLTNK1G HDPE PLATING TANK & LID 1 GAL $4.00

PLTNK2G HDPE PLATING TANK & LID 2 GAL $6.00

PLTNK35 HDPE PLATING TANK & LID 3.5 GAL $10.00

PLTNK5 HDPE PLATING TANK & LID 6 GAL $12.00

PLTNK16 HDPE PLATING TANK & LID 20 GAL $55.00

HEAT110 300W CERAMIC PLATING HEATER - 110°F $17.50

ZoopSeal™Protect all your polished aluminum, stainless steel and chrome parts from oxidation and eliminate the need for repeat polishing. A kit covers 75 square feet. Easy to apply when following the instructions provided. Formulated for use on cars, trucks, boats motorcycles, engines, wheels and interior accessories. When applied properly ZoopSeal™ will:

• Prevent dulling and oxidation• Retain the polished brightness and luster of aluminum• Eliminate the need for repeat polishing • Be long lasting • Will work on aluminum, brass, and stainless steel • Be safe to use and environmentally friendly

Without ZoopSeal With ZoopSeal

This kit will supply you complete coverage for 75 sq. ft, which covers an entire engine AND four wheels. ZoopSeal will NOT remove any scratches or nicks that are on your product, so you may need to have your product re-polished BEFORE you apply ZoopSeal, since it will seal in any defects your product already has.

ZSEAL ZOOPSEAL KIT $129.95

ZSEALMINI ZOOPSEAL MINI KIT - COVERS 37.5 SQ FT $99.95

Kit Contains:

* Zoops Cleaner Concentrate * ZoopSeal Part A * ZoopSeal Part B * Final Sealer * Spray Bottle * Written Instructions * Application Video * Application Cloths * Rubber Gloves

Black Oxide KitThis new technique was developed by the commercial gun blue manufacturers as a more environmentally friendly system than the commonly used hot application. Parts requiring blackening are simply placed in the liquid at room temperature, no electrical power is required.

Convenient - Easy to do in house. No waiting for heatup of blackening solution. No waiting for the unpredictable return of parts from an outside vendor. Eliminates high outside vendor costs. Retain control of production and quality. Ideal for high volume or short runs. Works especially well for blackening large volume of small parts in a rotating barrel.

Higher Productivity - Parts can be blackened in two minutes vs 15 to 30 minutes for hot oxide. Normally twice the amount of parts can be blackened in the same amount of time as with hot oxide.

Controllable - Long bath life, blackening solution may be replenished indefinitely with periodic additions of fresh concentrate.

• Versatility - Blackens cast iron, forged steels, mild steels, hardened tool steels and powdered metal parts. No white salt bleedout as is common with hot oxide.• Dimensional Control - No heat distortion. No smutty rub-off as with other room-temperature blackening processes.• Energy Cost Saving - Blackening is done at room temperature vs hot oxide blackening done at 290°F.• Safety - Blackening solution uses odorless, mild water-dilutable chemicals that require no venting vs hot oxide. No hazardous caustic chemicals with fumes that present health hazards and no spattering of hot, skin-burning chemicals.• Parts Coverage - 600 to 1200 sq. ft. of surface area blackened per gallon of concentrate.

How to achieve professional results in minutes:- 1. Thoroughly clean the part to be blackened by either sandblasting, wire brushing, wire wool abrasive cleaning, or by scrubbing in ‘VIM’ or ‘COMET’ household abrasive cleaner. Make sure you have removed all rust, paint, oil and grease. 2. Immerse the part in the mixed Black Oxide Solution and swirl around for between 30 seconds and 5 minutes. Alternatively, the part may simply be placed in the solution for 5 - 10 minutes. Remove the part from the solution and rinse in fresh water.3. Immediately brush on or dip into the Penetrating Sealant, and allow to soak in the liquid for 5-10 minutes. Shake off any excess and allow to dry thoroughly before handling.

Black Oxide works on steel & iron parts only and will not blacken Stainless Steel.

1.25 Gallon Kit: 1 Pint Black Oxide Concentrate

(makes 1.25 gal)2 x 1 Quart Penetrating Sealer1 x 2 Gal Plastic Blackening TankInstruction SheetFree Technical Support

2.5 Gallon Kit:2 x 1 Pint Black Oxide Concentrate

(makes 2.5 gals)1 Gal Penetrating Sealer1 x 3.5 Gal Plastic Blackening TankInstruction SheetFree Technical Support

45 Gallon Kit:5 Gallons Black Oxide Concentrate

(makes 45 Gals)5 Gallons Penetrating SealerInstruction SheetFree Technical Support

BO1 BLACK OXIDE KIT 1.25 GAL $35.00

BO2 BLACK OXIDE KIT 3 GAL $79.00

BO3 BLACK OXIDE KIT 45 GAL $555.00

BOCONC1P BLACK OXIDE CONCENTRATE (1.25 GAL) 1 PINT $20.00

BOCONC1Q BLACK OXIDE CONCENTRATE (2.5 GAL) 1 QUART $30.00

BOCONC5G BLACK OXIDE CONCENTRATE (45 GAL) 5 GALS $350.00

PSEAL1P PENETRATING SEALER 1 PINT $7.50

PSEAL1Q PENETRATING SEALER 1 QUART $10.00

PSEAL5G PENETRATING SEALER 5 GALS $175.00

Stainless Steel BlackenerStainless Steel Blackener 370 is an acidic liquid concentrate used full strength or diluted with up to 3 parts water to blacken stain-less steel at room temperature. Recommended for color coding parts and blackening engravings on stainless steels. Produces a pleasing dark gray/black finish.

SSB370 STAINLESS STEEL BLACKENER 1 PINT $19.00

Silvaspray™NOW, you can plate all plastics - easily!

Silvaspray™ is the product we’ve been waiting for!!

Simply spray on Silvaspray™, allow to dry and plate.

Directly accepts Bright Acid Copper, Copy Chrome, Nickel. (not recommended for Brush Plating)

Pure Silver- Highly Conductive, no ‘missed spots’ of platingIncredible bond strength, bonds to all plastics and - materials like dried flowers, baby shoes, etc.Finished plated surface can be buffed. No delaminating from surface.Fast drying, ready to plate in 30 minutesBeats ALL other conductive paints – by a mile!Micro fine surface, gives incredible detail on intricate moldings.No need to pre-wire the parts. Simply spray, allow to dry, then attach an alligator clip.8 oz covers approx 20-30 sq ft

More Technical Information:

Silvaspray™ is a new silver conductive coating for use on plastic substrates. It is unique in that it is formulated in very mild solvents that can tolerate higher built-in stresses which can be found in molded parts, and provides unequaled shielding at less than 0.5 mil (12.5 microns) dry film thickness. The dried conductive film is extremely hard, tough and durable. Contains no methyl ethyl ketone (MEK) or other strong solvents, which can attack solvent-sensitive substrates, such as polycarbonate and polycarbonate blends. Silvaspray™ is supplied as a concentrate, and it is designed with a fast drying solvent blend, which is desirable in high volume production.

Outstanding Characteristics:

Compatible with sensitive plastics because of mild solvents.Effective shielding at less than 0.5 mil (12.5 microns) dry film. Contains no ketones, such as MEK, or other harsh solvents.100% Silver as the conductive medium.Unmatched conductivity - superior to any other coating product.Cost saving because of superior conductivity performance at thin films. Excellent film cohesion.“Zero Tolerance” for loose particles in the film.Passes U.L. requirements.Excellent adhesion to most plastic substrates.Excellent abrasion resistance.Supplied as a viscous liquid for reduced settling.Minimal overspray and dusting during application.No rub-off due to handling.Fast drying.

Although Silvaspray is formulated in mild solvents, the user must test the compatibility on the actual molded parts to determine its suitability for any specific application.

The following application parameters should be followed for optimum properties:Material should be stirred thoroughly before use.Material should be incorporated into a re-circulating system.Pressure in the system should be adjusted to produce sufficient flow rates to ensure suspension of the metal.The gun should be set as follows: Completely shut off needle to the gun.Slowly open needle to achieve a minimum wet film.Adjust fan for part.Readjust needle setting to ensure minimum wet coat.

By following the above procedures, a number of benefits will be achieved. The optimum minimum film thickness will result in minimum cost per part. The above techniques will produce a very smooth and bright appearance. Maximum conductivity will also be achieved. Silvaspray™ dries rapidly. Keep container closed. If skins develop, do not attempt to dissolve - strain through a coarse filter. Clean equipment after each use. Ethyl alcohol can be used to clean equipment. If strong solvents are used, flush the system with ethyl alcohol before use.

SS49 SILVAPSRAY™ 8 OZ $49.50

Digital PH TesterAccurately measures pH ranging from 0-14 pH. Pocket-sized, lightweight instrument will quickly test all your plating solutions, and even your swimming pool water. The unit is splash-proof, and has one point calibration. Full instructions included.

Reverse Osmosis SystemThis is an economical 10 gallon per day Reverse Osmosis unit that is compact in size, for situations that require less space and the benefit of being portable. On average, this unit will remove 94-98% of tap water contaminants. It includes a 10 gallon per day TFC membrane, an IFCE inline carbon/sediment pre filter, a 3/4 inch garden hose adapter and 6 feet of yellow, blue and orange tubing. This unit can be run on ANY water system, well or city.

Specifications:Length: 14 1/2”Width: 5 1/2”Height: 3”Dry weight: 4.5 lbsOptimal input water temp: 70-77°F, 21-25°COptimal PSI: 65Optimal Total Dissolved Solids: <200 ppmInput water type: Any house water systemMembrane type: Thin Film Composite, TFCRated Gallons Per Day: 10Waste to Product ratio: 4 to 1Inhibiting/Damaging tap water chemicals: Iron, Calcium, Magnesium, Heavy SedimentPrefilter media: IFCE; Inline 10µ, solid block carbon filterPost filter media: N/ASupplied input water adapter: GHF, 3/4 standard threadSee Connection Parts for optional adaptersTubing type: 1/4 pressure tubingFilter change times: NOTE: change times are varied depending on the tap water conditions. Stated times are an average: TFC membrane: 3 to 5 years, IFCE: 6 months

The FLUSH KIT enables the membrane to be flushed with pressurized water to help remove contaminate buildup and extend membrane life. This kit comes complete with all necessary fittings to hook up to the RO system. The system includes the Flush Kit.

TFC Membranes will need to be replaced every 3-5 years.

IFCE Carbon filters will need to be replaced approximately every 6 months.

RO169 REVERSE OSMOSIS SYSTEM & FLUSH KIT $169.00

TFCMEM TFC MEMBRANE $67.50

FLUSHKIT FLUSH KIT $17.50

IFCE IFCE FILTER $22.00

PH39 DIGITAL PH METER $39.00

Buy One Get One Free, While Supplies Last. Check web site for availability.Indicate 1/2”, 5/8”, 3/4”, 7/8”, 1” or 11⁄4” Hole Size On Order Form.

Sisal WheelsSisal is a slender, hard, cellular strand of fi ber that has demonstrated its great strength and tough resiliency in the form of binder twine, cord & rope for many years. These qualities, along with its natural abrading and grease absorbing characteristics, provide an ideal buffi ng wheel fabric. Sisal buffi ng wheels will provide both polishing and cutting action. They will remove stretcher strains, orange peel,

polishing wheel grit lines, light die marks, etc. To effect a fast cut, use a sisal wheel with the Black Emery compound.

SW43 4” X 1/2” $3.95

SW64 6” X 1/2” $4.95

SW85 8” X 1/2” $5.95

SW820 8” X 7/8” $17.95

SW107 10” X 1/2” $7.95

SW1020 10” X 7/8” $21.95

Spiral Sewn Cotton WheelsSpiral sewn wheels are the workhorse of most buffi ng and polishing jobs. Because the plies of cotton cloth are sewn together spirally, the wheel becomes much harder and more pressure can be exerted on it. This is especially useful when ‘cutting’ the metal.The faces of these wheels are pre-raked to accept compound immediately. These wheels are dependable and long wearing. Use With Any Compound.

SSCW3 3” X 1/4” $2.75

SSCW43 4” X 1/2” $3.85

SSCW65 6” X 1/2” $5.15

SSCW6 6” x 7/8” $7.95

SSCW87 8” X 1/2” $7.95

SSCW880 8” X 7/8” $18.95

SSCW1040 10” X 1/2” $9.95

SSCW1080 10” X 7/8” $21.95

SSCW1240 12” X 7/8” $22.95

Loose Cotton WheelsThe main purpose of a loose cotton wheel is to polish and cut in a similar manner to the Spiral Sewn Cotton Wheel except that this wheel, not being tightly stitched together, will collapse, allowing the cotton to get into awkward places more easily. If you have an object with fi ne details and awkward crevices, then this is the wheel to use. Because you will be unable to exert pressure which slows down other harder

wheels, you should consider putting LARGER loose cotton wheels on your buffer. This will increase the surface speed, improving the overall fi nish and the time involved. Use with any compound.

LCW43 4” X 1/2” $3.95

LCW65 6” X 1/2” $4.95

LCW87 8” X 1/2” $7.95

LCW1020 10” x 1/2” $9.95

LCW1240 12” X 1/2” $12.95

Canton Flannel Wheels

Canton fl annel is very soft, and this wheel is loosely stitched, so the layers of cloth fl are out to give a wide angle ultra smooth polish-ing surface. Generally used with the BLUE or RED compound, this wheel can be used on the most delicate items such as silver and gold plate. This wheel should not be contaminated with any other compound.

CFW43 4” X 1/2” $3.95

CFW64 6” X 1/2” $4.95

CFW87 8” X 1/2” $7.95

CF14 14” $14.45

Treated Vented BuffsThese new buffs are specially treated to give longer life than standard buffs. They cut and color faster and are vented to keep the work piece cooler. Hard center allows fast mounting to tapered spindle for

BC4 4” X 1/2” $4.95

BC6 6” X 1/2” $6.95

BC8 8” X 1/2” $8.95

BC10 10” X 1/2” $11.50

quick change. Use with any compound.

Treated Spiral WheelsThese new buffs are specially treated to give longer life than standard buffs. This treatment makes them

DC4 4” X 1/2” $4.95

DC6 6” X 1/2” $6.95

DC8 8” X 1/2” $8.95

DC10 10” X 1/2” $11.50

much harder than regular cotton buffs, which allows the user to exert more pressure onto the wheel and gets the job done faster. Use with any compound just like standard spiral sewn wheels.

More Buffi ng Wheel Products On Pages: 47, 48Buffi ng Compounds On Pages: 55 - 60

Buy One Get One Free, While Supplies Last. Check web site for availability.Indicate Hole Size On Order Form.

Acrylic Buff

This buff has 16 plies of soft Canton Cloth, carded on one side, to enhance the softness, yet maintain a certain rigidity.It should be used at speeds lower than 1800 rpm to buff acrylic lacquers and varnishes. Ideal for buffi ng wooden instruments, furniture etc. Has metal center and 3/4” hole. Hole size can be reduced to 1/2” or 5/8” with free adapter.

BC12 12” $13.50

Cushion BuffsThese buffs are sewn with two rows to slightly stiffen the buff. This im-proves the speed of the fi nal coloring operation, giving you performance

CB4 4” X 1/2” $1.50

CB6 6” X 1/2” $2.25

CB8 8” X 1/2” $3.00

All Sisal BuffsAn aggressive wheel, designed to These wheels are uncovered versions of our Sisal Wheel. They feature 3/8” sewing spacing.

Sisal buffi ng wheels will provide both pol-ishing and cutting action. They will remove stretcher strains, orange peel, polishing wheel grit lines, light die marks, etc. To effect a fast cut, use a sisal wheel with greaseless or Super Sisal compound.1/2”, 5/8”, 3/4”, 7/8”, 1” or 11⁄4” Hole Size

SWA12 12” X 3/8” $4.00

SWA14 14” X 3/8” $4.75

SWA16 16” X 3/8” $5.95

String BuffThousands of thin cotton string strands will buff all types of plastics, including bacolite, to a shiny surface. The buff is specially designed to keep the plastic cool.

Bring side markers, turn signals, tail light lenses to shiny, like-new condi-tion. Thousands of 1-3/4” long cot-ton strands reach deep into details to

STRBUFF 6” $12.75

PLBFFKIT Small Plastic Kit1 x String Buff1 x Plastic Glo Compound

$20.95

TB2 2” x 2” $7.75

Untreated Vented BuffsThe folded pleats hold more com-pound and keep the part cooler, resulting in a being twice as fast as a Spiral Sewn wheel. 10” wheels require 3” washers. These wheels are softer than their yellow cous-ins. 1/2”, 5/8”, 3/4”, 7/8”, 1” or 11⁄4” Hole Size

VC6 6” $6.50

VC8 8” $8.75

VC10 10” $10.95

Tapered Buff

2” Diameter x 2” Long1/4” ShaftChuck Mounted

somewhere between a spiral sewn and a loose wheel.

4” & 6” wheels are available with a 1/2”, 5/8”, 3/4”, 7/8”, 1” or 11⁄4” Hole Size. 8” wheels are available with a 5/8”, 3/4”, 7/8”, 1” or 11⁄4”

HGBUFF HOURGLASS BUFF $6.95

Hourglass BuffWe developed a special buffi ng wheel that fi ts straight into a drill chuck. The unique shape allows the buff to rest on a pipe without spinning off.

By simply rotating the drill, all angles of the pipe can be buffed rapidly. The tapered end allows you to get into diffi cult corners.

WR995 WHEEL RAKE $9.95

Wheel RakeOur wheel rakes make cleaning your buffi ng wheels easy. Offer the jagged blade

gently polish and shine without overheating and melting plastic. Use in conjunction with our Plastic Glo Compound.1/2” OR 3/4” Hole Size Only

to the edge of the spinning wheel, and work it across the face until the wheel looks bright and fl uffy once more. This action, done periodically, will remove entrapped metal particles, which could scratch a more delicate part.

Buy One Get One Free, While Supplies Last. Check web site for availability.Indicate Hole Size On Order Form.

Abrasive Nylon WheelsThe next best thing to a sand blaster!

Lasts up to 10 times the life of a wire wheelWill not puncture skin

Does not shed bristles - unlike dangerous wire wheels

Will not rust and maintains its shape3” wheels - ideal for use with a small hand

drill.

NBB350 3” $3.95

NBB595 6” $5.95

NBBK Kit Includes:2 x 3” Wheels1 x Arbor Adapter

$9.95

Scrubber WheelScrubber wheels remove rust, scratches, minor blemishes, old paint, and plating. A featherlite touch is required with these wheels, unlike an ordinary buffi ng wheel. Heavy pressure will result in premature wear of the wheel.

The blisters found in chrome, particularly on pot metal, can be fl attened with this wheel.

BRW9 6” $10.00

BRW15 8” $15.00

Finger BuffAn aggressive wheel, designed to buff irregular contoured metals, es-pecially useful for buffi ng of checker plate. The treated sewn cloth fi ngers penetrate into crevices etc. and at the same time reduce friction heat buildup, so reduces the possibility

of distorting thin metal panels etc.Use with Greaseless or black emery compounds. The wheel comes with a 5/8” hole in the metal center. 1/2” inserts are available. Now in three convenient grades.

CFB8 8” X 3/4” HARD $3.95

CFBM8 8” X 3/4” MED $3.95

CFBS8 8” X 3/4” SOFT $3.95

Sisal Rope BuffWith a thickness of 2”, this long lasting wheel is an economic alternative to stacking sisal wheels on a shaft.

The fi bers are treated and stiff, giving an excellent hard surface for the initial cut to de-burr etc. Use with Grease-less compounds or Black Emery.

1/2” Hole Size Only

SRB6 6” x 2” $8.00

Mushroom Buffs

MB25 2.5” Dia. $4.25

MB35 3.5” Dia. $5.25

MB45 4.5” Dia. $6.50

MBKIT All 3 Buffs $14.00

Facer BuffsFacer buffs are similar to Mushroom buffs, except that the have a fl atter surface. They are particularly useful for

FB2 2.5” Dia $4.25

FB3 3.5” Dia $5.25

FB4 4.5” Dia $6.50

buffi ng and polishing larger fl at areas such as primary covers on motorcycles. Use with liquid or bar compounds.

Ideal for buffi ng contoured shapes such as wheels.

Use with any compound.

Substrates take a fl at satin fi nish, which should be buffed with emery and a sisal wheel, followed by white or brown compound on a cotton wheel. Fits 1/2” & 5/8” shafts.

SMW175 1” Dia x 3/8” Thick x 3/32” Shaft $2.00



Shank Mounted Buff

Up to 5000 RPM

BRSMW1 1” Dia x 1/8” Shaft $1.99

Brass Wire Shank Mounted Wheel

Up to 5000 RPMSMW175

Only

Aluminum & Copper Polishing KitKit Includes:1 x Medium Mushroom Buff1 x Small Mushroom Buff1 x Arbor Adapter1 x 4” Sisal Wheel1 x 4” Spiral Sewn Wheel1 x 4” Loose Cotton Wheel1 x 1.75 x 1” Bullet Bob1 x Large Brown Compound1 x Large Black Compound1 x 8 ox White Rouge Liquid PolishInstructions

This kit has been specially designed for polishing motorcycle and small engine parts using electric drills. The Liquid WHITE ROUGE polish should be wiped onto the surface with a cloth, then buffed off using any wheel, bob

Chrome Polishing KitThis kit contains everything you need to polish chrome, nickel and other hard metals. The arbor adapter allows you to mount the wheels on an electric drill. Use the white compound with the spiral sewn cotton wheel, followed by the blue compound.

The Blue Begone™ easily removes bluing from chrome, and can also be used as an excellent all around final polishing liquid. The Hourglass buff allows easy polishing of chrome pipes.

1 x Blue Begone™1 x Large Blue Compound1 x Large White Compound2 x 4” Spiral Sewn Cotton Wheels2 x 4” Loose Cotton Wheels1 x 3.5” Mushroom Buff1 x Hourglass Buff1 x Chamois Cloth1 x Arbor Adapter1 x 2” High x 1” Wide Bullet Felt Bob1 x 1” High x 1/2” Wide Bullet Felt BobInstructions

CRPOL45 CHROME POLISHING KIT $44.99

or mushroom buff. The sisal wheel is designed for aggressive cut down or scratch and buff mark removal using the black compound.

ALPOL35 ALUMINUM & COPPER ALLOY POLISHING KIT $39.00

Small Plastic Polishing KitThousands of thin cotton string strands will buff all types of plastics, including bacolite, to a shiny surface. The buff is specially designed to keep the plastic cool. Bring side markers, turn signals, tail light lenses to shiny, like-new condition. Thousands of 1-3/4” long cotton strands reach deep into details to gently polish and shine without overheating and melting plastic. Use in conjunction with our Plastic Glo Compound.

P-22 Plastic-Glo is an ultra-fine cutting and high coloring compound for bringing out a smooth, brilliant finish on practically every type of plastic. No. P-22 is a pure white compound on the very dry side. Will not glaze on the buff or load up compound into crevices or recesses of the work. Being exceptionally fine, it will not scratch the softest plastic. Nothing better for producing the very finest finishes on transparent plastics.

Kit Contains: 1 x String Buff, 1 x Plastic Glo (Ultra Fine, Dry Grade) Indicate 1/2” or 3/4” Hole Size On Order Form

PLBFFKIT SMALL PLASTIC POLISHING KIT $20.95

STRBUFF STRING BUFF $12.95

Abrasive Wheel SystemLOW COST FLEXIBLE GRINDING WHEEL

For use on your buffi ng machine!Much more abrasive than the toughest greaseless compounds

Cuts through: PAINT, RUST, PLATINGGrinds away: SHARP EDGES, PITS, SCRATCHES, Parting Lines, Mold Marks, Tool & Die MARKS,

STRETCHED METAL MARKS, BURRS ETC.

The Abrasive Wheel System comprises of a special adhesive, and a tough 80 grit aluminum oxide powder. Once the adhesive has hardened on the wheel of your choice, (usually a spiral sewn buffi ng wheel) the wheel is transformed into a tough, yet somewhat fl exible grinding wheel, capable of grinding of plating,

AWS750 ABRASIVE WHEEL SYSTEM $7.50

BWC4 BUFFING WHEEL CEMENT 8OZ $4.00

BWC7 BUFFING WHEEL CEMENT 1 QUART $7.00

BWC21 BUFFING WHEEL CEMENT 1 GALLON $21.00

ALOX80 ALUMINUM OXIDE 80 GRIT 1LB $3.50




Flap WheelsThese tightly packed and bonded sheets of resin bonded aluminum oxide are great for sanding, shaping and polishing all types of materials. Especially good for removing paint and rust.

1/4” shank works in any drill, drill press, fl exible shaft, lather etc.

FW1616F FLAP WHEEL 120 GRIT 1” X 1” $4.50

FW1616M FLAP WHEEL 80 GRIT 1” X 1” $4.50

FW1616C FLAP WHEEL 60 GRIT 1” X 1” $4.50







paint, rust, and smoothing out all metals. The system is ideal for making felt bobs more abrasive.

Using a knife or spatula, the thixotropic adhesive is spread evenly around the face of your wheel. Finally, roll the wheel into the abrasive using light pressure, ensuring a heavy pickup of the abrasive. Leave the coated wheel to air dry for several hours prior to use. Subsequent applications will provide a longer lasting system. Gentle heat from an oven will speed up drying times considerably. As the system wears off, the wheel may be retreated numerous times. Kit Contains: 1 x 8oz Buffi ng Wheel Cement & 1 x 1lb Aluminum Oxide 80 grit

Stainless Steel Polishing KitKit Includes:• 1 x Large Black Compound• 1 x Large Green Compound• 1 x Large White Compound• 1 x 8oz Blue Begone Liquid Polish• 1 x 4” Sisal Wheel• 2 x 4” Spiral Sewn Cotton Wheels• 2 x 4” Loose Cotton Wheels• 1 x Arbor Adapter• 1 x Medium Bullet Felt Bob• 1 x 2.5” Mushroom Buff• Instructions

This kit has been specially designed for polishing stainless steel trim and other stainless parts using an electric drill or similar chuck tool. The sisal wheel and black compound are used for scratch removal. The green compound is then used to polish the metal, followed by the white compound and fi nally the Blue Begone liquid polish if desired. Loose buffs are designed to compact into tight spaces for easy polishing. The mushroom buff and felt bob are used to get into small areas where the buffi ng wheels will not go. A $58.00 value for only $42.00.

SSPOL STAINLESS STEEL POLISHING KIT $42.00

Large Felt Bob Kit

Our new felt bob kit has a multitude of shapes for all those difficult places to buff and polish. Ideal for polishing carbs, wheels, and heads. Made of a medium hardness felt, these bobs are ideal for use in die grinders, electric drills and air drills. Use with greaseless, or standard buffing compounds, or even convert the bob into a tough Sander by treating it with the Abrasive Wheel Cement system.All the bobs have 1/4” shafts.

Contains 1 Each BALLFB, CYFBMD, CYFB11, CYFBL125, BUFBMD275, CONEFB, CYFB1X15, DOMEFB, BALLNFB, BUFBLG395, CYFBL2, CYFBL34

LFBK39 $29.95

Assorted Felt Bob KitThese felt bobs are a medium/hard felt with industrial quality, which gives them a long life. They are designed to be used with all our compounds to cut and polish and get in all the small places where wheels can’t get. Up To 20,000 RPM.

ASSFB1150 1/8” SHAFT $10.50

Bullet Felt Bob

Up to 20,000 RPM

BUFBMD275 3/4” Wide x 1.5” High x 1/4” Shaft $2.50

BUFBLG395 1” Wide x 2” High x 1/4” Shaft $3.25

BUFBSM250 1/2” Wide x 1” High x 1/8” Shaft $1.95

Cylinder Felt Bobs

Up To 20,000 RPM. 1/4” Shaft

CYFBXL11 3” Wide x 1.5” High $11.50

CYFBLG6 2” Wide x 1” High $3.95

CYFBMD 1.25” Wide x 1” High $2.50

CYFBL2 1” Wide x 2” High $3.25

CYFBL34 3/4” Wide x 1.5” High $2.50

CYFBL125 1.25” Wide x 1” High $2.50

CYFB1X15 1” Wide x 1.25” High $2.50

Cone Felt Bob

Up to 20,000 RPM

CONEFB 3/4” Wide x 1” High x 1/4” Shaft $2.50

DOMEFB 1” Wide x 1” High x 1/4” Shaft $2.50

Dome Felt Bob

Up to 20,000 RPM

BALLNFB 3/4” Wide x 1” High x 1/4” Shaft $2.50

Balloon Felt Bob

Up to 20,000 RPM

BALLFB 3/4” Wide x 3/4” High x 1/4” Shaft $2.50

Ball Felt Bob

Up to 20,000 RPM

Buffing Kits

Indicate 1/2”, 5/8”, 3/4”, 7/8”, 1” or 11⁄4” Hole Size On Order Form.

1/4-1/3hp Motor Buffing Kit 6” x 1/2” face2 x Sisal Wheels2 x Loose Wheels2 x Spiral Sewn1 x Buffing Rake6 x Large Bars Compound (one of each emery, tripoli, white, blue, red & green)How to Buff & Polish Booklet

1/2-3/4hp Motor Buffing Kit 8” x 1/2” face2 x Sisal Wheels2 x Loose Wheels2 x Spiral Sewn1 x Buffing Rake6 x Large Bars Compound (one of each emery, tripoli, white, blue, red & green)How to Buff & Polish Booklet

3/4+hp Motor Buffing Kit 8” x 7/8” face2 x Sisal Wheels2 x Loose Wheels2 x Spiral Sewn1 x Buffing Rake6 x JUMBO Bars Compound (one of each emery, tripoli, white, blue, red & green)How to Buff & Polish Booklet

3/4+hp Motor Buffing Kit 10” x 7/8” face2 x Sisal Wheels2 x Loose (1/2” Face) Wheels2 x Spiral Sewn1 x Buffing Rake6 x JUMBO Bars Compound (one of each emery, tripoli, white, blue, red & green)How to Buff & Polish Booklet

3BMK55 1/4-1/3 HP MOTOR BUFFING KIT 6” x 1/2” FACE $47.43

4BMK65 1/2-3/4 HP MOTOR BUFFING KIT 8” X 1/2” FACE $56.72

1BMK129 3/4+ HP MOTOR BUFFING KIT 8” X 7/8” FACE $87.12

10BMK135 3/4+ HP MOTOR BUFFING KIT 10” X 7/8” FACE $95.22

Buffing Wheel SetsEach set contains two of each, spiral sewn, loose and sisal wheels.

WHST10 BUFFING WHEEL SET 6” x 1/2” FACE $10.00

WHST15 BUFFING WHEEL SET 8” X 1/2” FACE $15.00

WHST36 BUFFING WHEEL SET 8” X 7/8” FACE $36.00

Pitstop™To carry out repairs to pits, simply bead blast the part, and clean the pits of black corrosion.

If the pits are deep or big, under-fill them with Bondo or some other suitable car body filler. En-sure you leave a little room for some PITSTOP™ over the top of the filler. This two step process will economize on the PITSTOP™ application.

Fill the deeper areas with Bondo. Allow to cure, then sand the area lightly. This will ensure you have slightly under-filled the holes.

Squeeze out equal quantities of PITSTOP™ and mix thoroughly. Apply with the spatula pick supplied in a smooth, even layer, and allow to cure. You may need to sand down the repair, so do it with 600 grit paper, ensuring you do NOT cut through the PIT-STOP™.PITSTOP™ is ideal for parts that have been copper plated, and those annoying black pits are still showing through. Simply clean the effected area (Light bead blast, abrade, etc) and apply a thin layer of PITSTOP™ over the offending area, then re-plate with copper.

PITS29 PITSTOP CONDUCTIVE FILLER 0.75 FL OZ $29.00

Flitz Polishing BallCut your cleaning time in half or more with our Polishing ball tool. It works with all drills and air tools. Buffs up to 2000 RPM. Will buff out scuffs, Oxidation, Tarnish, Brake Dust, Pitting, Corrosion on ALL Metals, Paints, Fiberglass, Plastics, Eisenglass, and Wood. Buffs hard to reach area in seconds. Reuseable. Polishes in minutes what otherwise takes hours!!! Great on textured or smooth surfaces like Diamond plate!

screw area, before each use. For best results use only with genuine Flitz Polishes, Waxes & Cleaners. Apply a thin coat of Flitz to entire area. Buff lightly. Use high speed, up to 2000 rpm, to achieve highest luster. Repeat if necessary.For Extended Life of fabric do not stay on one area more than 30 seconds, or use to polish sharp edges. Wash Flitz polishing ball by hand or machine. very Dirty, pre-soak in detergent with water. Rinse and let air dry.

FLBALL $24.99

Microfiber ClothsMillions of microscopic non-abrasive

fibers per towelNon-abrasive

Lint-freeExtremely Durable - lasts for hundreds

of washings

FIBERCLOTH 16” x 16” Cloth $2.75

FIBERCLTH14 14” x 14” Cloth $2.45

FIBERSHAM 14 x 14 Shammy Cloth $8.95

FIBERMITT Microfiber Mitt $4.95

Super-Absorbent - holds 7 times it’s weight in liquid - uses capillary action to absorb. Chamois can drag debris along surface of paint - Microfiber reduces/eliminates potential by trapping dirt/dust/debris into the deep into the cloth.

Cape Cod Polishing ClothsMoist Cotton Cloths impregnated with a spe-cial polish and tarnish remover. Polishes to in brilliant mirror shine in seconds!

Simply rub the part gently with the cloth and you will really be amazed how effective these cloths are! Be careful to hide them though, or they will end up in the kitchen doing the flatware!

CCPOL375 $5.65

ANTI TARNISH PROTECTOR coating protects against water stains, tarnish and corrosion and greatly stretches the time between polishes. Cleans: Silver - gold - brass - pewter - copper - nickel - bronze - aluminum - stainless steel. 2 - 4” x 6” cloths in a resealable pouch - lasts for ages!

More Buffing Wheel Products On Pages: 46 - 48Buffing Wheel & Compound Kits. See Page 52

Expander Sanding WheelCleverly designed to accommodate a sanding belt, the Expander Sanding Wheel allows the user to sand large areas quickly and uniformly. Ideal for sanding engine castings to remove the sand mold marks prior to polishing. The center of this wheel has special adapters to fit shafts of 1/2”, 5/8”, 3/4” & 1” diameter.

The wheel comes with:2 x 40 Grit Belts2 x 80 Grit Belts2 x 120 Grit Belts

The wheel has a 6 inch diameter, with a 1.25 inch face. Max RPM 2800. Our Aluminum Oxide sanding belts fit all other brands of expanding wheels.

ESW29 Expander Sanding Wheel $19.95

ESB80 80 Grit Belt x 1 $1.65








ESB1205 120 Grit Belt x 5 $7.75

ESB2405 240 Grit Belt x 5 $7.75

ESB3205 320 Grit Belt x 5 $7.75

ESB4005 400 Grit Belt x 5 $7.75

Indicate Hole Size On

Order Form

Made of fine Italian Polishing Felt.

Secure to any drill. Use only in forward or right rotation. Check tightness of center Phillips screw and felt covering

Shaft ExtendersThese extenders are perfect for turning old electric motors into powerful buffing machines. Just attach to the

SALT57 LEFT THREAD 5/8” BORE 1/2” SHAFT $7.50

SART57 RIGHT THREAD 5/8” BORE 1/2” SHAFT $7.50

SALT17 LEFT THREAD 1/2” BORE 1/2” SHAFT $7.50

SART17 RIGHT THREAD 1/2” BORE 1/2” SHAFT $7.50

Chuck Adapter

This handy accessory turns an ordinary motor into a bench mounted drill. Just attach

CA995 1/4” THROAT $7.75

CAL995 1/2” THROAT $9.95

Bench Mandrels

Attach these mandrels to an electric mo-tor with a V Belt to make a HIGH QUAL-ITY, low cost work station for various sanding, polishing and buffing opera-tions. Will run wheels up to 1” thick.

Features high quality precision grade die cast ball bearing pillow blocks, perma-

MAND21 5/8” SHAFT $31.00

MAND22 1/2” SHAFT $31.00

Arbor Adapters

These sturdy adapters allow you to mount buffing wheels, wire wheels, cut out wheels etc. onto any chuck equipped tool.

AA275 ARBOR ADAPTER $3.95

ARBKIT12 ARBOR KIT:1 X ARBOR ADAPTER2 X 4” SISAL WHEEL2 X 4” SPIRAL SEWN WHEEL2 X 4” LOOSE COTTON WHEEL

$12.95

Grinder/Buffer Adapter

This handy accessory fits a 5/8” shaft to extend the stubby shaft out 3” further from the motor body. Shaft size = 1/2” diam.

GA58 $8.95

More Buffing Wheel Products On Pages: 46 - 48Buffing Compounds On Pages: 55 - 60Buffing Wheel & Compound Kits. See Page 52

Extra Long Shaft Extenders

Designed especially for larger buffing & polishing units. The wide shoulder provides plenty of clearance plus ample space for easy movement & positioning of work pieces. Great for mounting

SAXLLT1 LEFT THREAD 1/2” BORE 1/2” SHAFT $10.75

SAXLRT1 RIGHT THREAD 1/2” BORE 1/2” SHAFT $10.75

SAXLLT5 LEFT THREAD 5/8” BORE 1/2” SHAFT $10.75

SAXLRT5 RIGHT THREAD 5/8” BORE 1/2” SHAFT $10.75

this adapter any 1/2” right threaded shaft or one of our shaft extenders. The Chuck Adapter is seen here fitted to a shaft extender.

nently sealed and lubricated. Threaded shaft ends L/H & R/H

2” diam V pulley (for 1/2 belts) & hex nuts with flanged washers for shaft ends.

shaft of your electric motor, tighten the grub screws and install the buffing wheel.

larger sized wheels. 6-1/2” Long. Fits 1/2” Wheel Hole

Buffing CompoundOur best selling bars come in 6 common grades, featured on this page. We also sell over 20 specialized buffing compounds. Our buffing and polishing compounds are manufactured from high quality ingredients, designed for the industrial plater/polisher to obtain fast exceptional quality finishes. The Jumbo bars are approximately 2” x 2” x 8” & weigh approx. 3 lb. each. The large bars are 1.25” x 1.25” x 6” and weigh approx. 1.5 lb. each.

BLACK/EMERY BARAn emery filled compound which has excellent cutting qualities. Ideal for removing scratches, small pits, thin plate, paint, lacquer etc. We recommend you start almost every job with this material, it will save you hours of work rather than using the less abrasive materials first. Use with a SISAL wheel for best results.

BLKBC7 BLACK COMPOUND JUMBO $7.50

BLKBC5 BLACK COMPOUND LARGE $4.50

BLKBC76 BLACK COMPOUND X 6 JUMBO $39.00

BLKBC56 BLACK COMPOUND X 6 LARGE $22.50BROWN/TRIPOLI BARA tripoli compound, known well for its general purpose use for buffing and polishing on soft metals such as, brass, copper, aluminum, pot metal.

BRBC7 BROWN COMPOUND JUMBO $7.50

BRBC5 BROWN COMPOUND LARGE $4.50

BRBC76 BROWN COMPOUND X 6 JUMBO $39.00

BRBC56 BROWN COMPOUND X 6 LARGE $22.50WHITE ROUGE BARThis compound will cut lightly, bringing most harder metals to a brilliant shine. Designed for polishing chrome and nickel plate, stainless steel and ordinary steels.

WBC7 WHITE COMPOUND JUMBO $8.50

WBCC5 WHITE COMPOUND LARGE $5.50

WBC76 WHITE COMPOUND X 6 JUMBO $45.00

WBC56 WHITE COMPOUND X 6 LARGE $27.00BLUE ROUGE BARThis compound is a drier, less greasy version, of what is commonly known as jeweler’s rouge. It had no cutting action, and can therefore be used on thin gold and silver plates without damage.

BLUBC7 BLUE COMPOUND JUMBO $7.50

BLUBC5 BLUE COMPOUND LARGE $4.50

BLUBC76 BLUE COMPOUND X 6 JUMBO $39.00

BLUBC56 BLUE COMPOUND X 6 LARGE $22.50STAINLESS STEEL BARUse this compound exclusively to bring stainless steel to a high quality shine.

SSBC7 STAINLESS STEEL COMPOUND JUMBO $10.50

SSC5 STAINLESS STEEL COMPOUND LARGE $8.50

SSC76 STAINLESS STEEL COMPOUND X 6 JUMBO $57.00

SSC56 STAINLESS STEEL COMPOUND X 6 LARGE $45.00JEWELER’S ROUGEHigh quality coloring rouge for treating gold, silver, pewter, nickel and almost all precious metals. Use with a Canton Flannel Wheel to bring out the true colors of your metals.

JRBC7 JEWELER’S ROUGE COMPOUND JUMBO $10.50

JRBC5 JEWELER’S ROUGE COMPOUND LARGE $8.50

JRBC76 JEWELER’S ROUGE COMPOUND X 6 JUMBO $57.00

JRBC56 JEWELER’S ROUGE COMPOUND X 6 LARGE $45.00STARTER KITS (6 BARS - ONE OF EACH COLOR)

STARBC27 STARTER KIT LARGE $29.00

STARBC40 STARTER KIT JUMBO $42.00

Buffing CompoundGREASELESS COMPOUND

Greaseless Buffing compounds may be applied to almost any cloth buffing wheel, (sisal, spiral sewn cotton & loose cotton) turning it into a tough flexible grinding wheel. The roughest casting edges can quickly removed. These materials do an excellent job of leveling highly contoured surfaces quickly.

GBC400 GREASELESS COMPOUND 400 GRIT $6.00





GBC4 GREASELESS KIT (240, 180, 120, 80 GRIT) 4 BARS $19.50

This is a greasy, extra fast cutting grade of Tripoli containing a high percentage of aggressive abrasives combined with Tripoli Powder, which produces a faster cutting action. Used exten-sively on heavy buffing work and all types of automatic buffing machines.

2” X 2” X 10” Bar

F515-6105 FAST CUT GREASY TRIPOLI COMPOUND T-12 $7.50

F515-6105C 6 X FAST CUT GREASY TRIPOLI COMPOUND T-12 $39.00

FAST CUT GREASY TRIPOLI COMPOUND

Developed especially for buffing down hard chrome plated surfaces to a smooth lustrous finish. Cuts fast and leaves the work clean.

2” x 2” x 10” Bar

F515-6112 ROUGE FOR HARD CHROME PLATE C-25 $10.50

F515-6112C 6 X ROUGE FOR HARD CHROME PLATE C-25 $57.00

ROUGE FOR HARD CHROME PLATE

A favorite for finishing brass, aluminum, copper, tin plate and other alloys. Will bring out a mirror-like luster on the work. Being a medium greasy grade it is ideal for the all around buffing job, requiring a brilliant finish.

2” x 2” x 10” Bar

F515-6115 BLACK MAGIC ROUGE GRADE-A $10.50

F515-6115C 6 X BLACK MAGIC ROUGE GRADE-A $57.00

BLACK MAGIC ROUGE (Medium Greasy High Luster)

A very dry compound made with green chromium oxide powder. Used in the jewelry trade for extremely fine color buffing jobs on all classes of metals. Also used for buffing precision tools, dies, and plug gages to a mirror bright finish and to remove light “metal fuzz” or lap lines with out disturbing the essential dimensions of the work.

1.5” x 1.5” x 7” Bar

F515-6124 GREEN ROUGE J-52 $8.50

F515-6124C 6 X GREEN ROUGE J-52 $45.00

GREEN ROUGE

Buffing Compound

Our most popular grade because it is adaptable for cutting down and coloring the average run of aluminum, brass, and die cast metals. Also used extensively for buffing copper plated articles, particularly where a regular Tripoli Compound is too severe and removes too much of the copper-plate. Contains a sufficient amount of grease binders to be used on most auto-matic buffing applications.

F515-6133 MED-GREASY COLORING COMPOUND D-25 $7.50

F515-6133C 6 X MED-GREASY COLORING COMPOUND D-25 $39.00

NON-FERROUS COLORING COMPOUND

An extra dry grade developed for “coloring out” operations on brass and sheet aluminum. Its light cutting action minimizes the danger of cutting too aggressively on the metal. Also recommended on recessed or indented surfaces that ordinarily would pack up with a greasier grade, giving difficult cleaning problems. Leaves a clear bright finish, free of dirt.

F515-6134 EXTRA DRY HIGH COLOR COMPOUND D-38 $7.50

F515-6134C 6 X EXTRA DRY HIGH COLOR COMPOUND D-38 $39.00

NON-FERROUS HIGH COLOR COMPOUND

A medium greasy, fast cutting compound suitable for buffing down and coloring out the work in one operation. This is our most popular all around grade for the large variety of average work.

F515-6142 EXCELLO SS COMPOUND (MED GREASY) #33 $10.50

F515-6142C 6 X EXCELLO SS COMPOUND (MED GREASY) #33 $37.00

EXCELLO STAINLESS STEEL COMPOUND (MEDIUM GREASY)

This grade was developed to “cut down” and “color” aluminum in one buffing operation on hand and automatic buffing machines. Brings up a high luster, leaving the buffed work clean and free of excess grease, or dirt.

2” X 2” X 10” Bar

F515-6126 ALUMINUM CUT & COLORING COMPOUND A-14 $8.50

F515-6126C 6 X ALUMINUM CUT & COLORING COMPOUND A-14 $45.00

ALUMINUM BUFFING CUT & COLOR COMPOUND

A very dry grade intended for buffing small work to a high luster. Will not pack intosmall cavities or recesses. If a brighter finish than No. A-14 Compound is desired,re-buff using A-15.

2” X 2” X 10” Bar

F515-6127 ALUMINUM HIGH LUSTRE COMPOUND A-15 $8.50

F515-6127C 6 X ALUMINUM HIGH LUSTRE COMPOUND A-15 $45.00

ALUMINUM BUFFING HIGH LUSTRE COMPOUND

Buffing Compound

A medium dry grade that has been a popular seller for years, for all classes stainless steel color buffing. A white compound made from pure alumina that produces an exceptional col-oring action without creating scratches.

F515-6147 ALL PURPOSE STAINLESS COMPOUND #301 $10.50

F515-6147C 6 X ALL PURPOSE STAINLESS COMPOUND #301 $57.00

ALL PURPOSE STAINLESS

An extra dry grade intended for color buffing stainless steel to a mirror-bright finish after the metal has been buffed down smooth with a stainless steel cut grade buffing compound. C-170 is also used to color buff chromium plated work to a higher and brighter luster and to remove stains and frosted burn marks. Does not load up on the buff or pack into crevices or recesses of the work.

F515-6113 EXTRA DRY HIGH COLOR COMPOUND C-170 $10.50

F515-6113C 6 X EXTRA DRY HIGH COLOR COMPOUND C-170 $57.00

WHITE LIGHTNING STAINLESS ROUGE

P-22 Plastic-Glo is an ultra-fine cutting and high coloring compound for bringing out a smooth, brilliant finish on practically every type of plastic. No. P-22 is a pure white com-pound on the very dry side. Will not glaze on the buff or load up compound into crevices or recesses of the work. Being exceptionally fine, it will not scratch the softest plastic. Nothing better for producing the very finest finishes on transparent plastics.

F515-6163 PLASTIC-GLO (ULTRA FINE, DRY GRADE) P-22 $11.50

F515-6163C 6 X PLASTIC-GLO (ULTRA FINE, DRY GRADE) P-22 $61.00

PLASTIC-GLO (Ultra Fine, dry grade)

Very similar to “Excello” but, being slightly greasier, it produces a faster cutting action.

Used extensively on automatic buffing machines.

F515-6141 FAST CUT SS COMPOUND (MED GREASY) #19 $10.50

F515-6141C 6 X FAST CUT SS COMPOUND (MED GREASY) #19 $57.00

“FAST CUT” STAINLESS STEEL COMPOUND (MEDIUM GREASY)

Because sharp abrasives have been blended into the formula, an extra fast cutting action is produced. Ideal for buffing out light tool marks or scratches. Its use may reduce or entirely eliminate previous finer polishing wheel operations.

F515-6144 EXTRA FAST CUT SS COMPOUND (MED DRY) #37 $10.50

F515-6144C 6 X EXTRA FAST CUT SS COMPOUND (MED DRY) #37 $57.00

“EXTRA FAST CUT” STAINLESS STEEL COMPOUND (MEDIUM DRY)

Buffing Compound

For Polishing, Lapping, Stropping and Honing Wood Working Tools to a micro fine razor sharp cutting edge.

F515-6271 GREEN MICRO FINE HONING COMPOUND - 6OZ #12668 $8.50

F515-6272 GREEN MICRO FINE HONING COMPOUND - 20OZ #12680 $19.99

GREEN MICRO FINE HONING COMPOUND

A ready-to-use, water-soluble, synthetic adhesive for setting up polishing wheels and bobs made of cloth, canvas, felt, leather or wood. Apply by brushing on thin coats and rolling the wheel in a pan of loose abrasive grain. Multiple coats are recommended to build up long lasting abrasive head thick-ness. Allow coating to air dry. Drying time may be reduced by using a heat lamp or oven heat. May be thinned with water if a “sizing coat” is desired on new wheels.

F515-442 FLEX-A-GLU POLISHING WHEEL CEMENT 1 GAL $22.00

FLEX-A-GLU POLISHING WHEEL CEMENT

Coat your own abrasive surface with premixed, ready-to-use Liquid Abrasive Sandpaper®. Liquid Abrasive Sandpaper® contains fused aluminum oxide abrasive dispersed in synthetic glue. Use it for setting up polishing wheels, bobs and buffs of canvas, cotton, felt, leather and wood.

Uses: Liquid Abrasive Sandpaper® can be conveniently dipped, brushed or sprayed, on a variety of shapes and sizes of wheels, bobs and belts to create an abrasive surface that can be as firm and hard, or flexible, yielding and resilient, as the underlying surface to which it is applied. The process may be visualized as a leveling, smoothing,

and blending operation to remove surface imperfections in the form of Pits, Scratches, Parting Lines, Mold Marks, Tool and Die Marks, Weld Blemishes, Stretched Metal Strains, Burrs or Sharp edges.

F515-424 LIQUID ABRASIVE SANDPAPER - 1 GAL 120 GRIT $39.00



LIQUID ABRASIVE SANDPAPER®

P-112 is our driest working grade formulated with an extremely fine abrasive particle. Used to impart a brilliant high-gloss finish. Recommended for final color finish on all plastics.

F515-6165 PLASTIC BUFFING COMPOUND (FINE) P-112 $10.50

F515-6165C 6 X PLASTIC BUFFING COMPOUND (FINE) P-112 $57.00

PLASTIC BUFFING COMPOUND (Fine)

SC-18 is formulated with sharp cutting, aluminum oxide abrasives, in a matrix of tacky grease binders.

Developed especially for applying to sisal/cloth buffing wheels for fast cutting action.

F515-6154 SUPER SISAL BAR COMPOUND SC-18 $9.50

F515-6154C 6 X SUPER SISAL BAR COMPOUND SC-18 $49.00

SUPER SISAL BAR COMPOUND

Buffing CompoundALL PURPOSE LUBRICANT FOR BELTS AND DISCS

This is the “original” and ever popular F-26 coated abrasive grease stick that is in universal use. The regular type polishing wheel grease sticks are purposely made of high melting point greases, but abrasive belts run so cool that these types of greases have a tendency to form a “gummy” surface referred to as “loading” or “glazing”. The use of F-26 on belts and discs prevents this. It is a light bodied grease - that spreads out thinly - remains “wet” on the belt - and provides lubrication by penetrating the coated abrasive surface. F-26 prevents

clogging and leaves the abrasive grit free to cut clean and smooth. F-26 is recommended for all belt-polishing operations - on all metals, plastics and glass.

F515-6050 COATED ABRASIVE GREASE STICK F-26 $7.50

F515-6050C 6 X COATED ABRASIVE GREASE STICK F-26 $39.00

COATED ABRASIVE GREASE STICKS - GRADE F-26

A WHITE TALLOW BASE LUBRICANT WITH A HIGH MELTING POINT

F-90 is a pure tallow base mixture. Its purpose is to serve as a lubricant and at the same time, fill and close the belt with a heavy bodied grease film. The object of such a heavy bod-ied grease film on the belt may be two-fold. When applied to fine grit size coated abrasive belts, it permits a glazing or burnishing action. When applied to coarse grit belt operations the grease film is heavy enough to stay on the belt under severe conditions.

F515-6051 COATED ABRASIVE GREASE STICK F-90 $7.50

F515-6051C 6 X COATED ABRASIVE GREASE STICK F-90 $39.00

COATED ABRASIVE GREASE STICKS - GRADE F-90

A medium priced white grease stick with good lubricating qualities. Our most popular grade for average polishing use.

F515-6061 TALLOW BASED GREASE STICK F-10 $6.50

F515-6061C 6 X TALLOW BASED GREASE STICK F-10 $34.00

TALLOW BASED GREASE STICKS GRADE F-10

A firm, hard yellow grease stick suitable for heavy-duty polishing wheel operations. A popu-lar grade.

F515-6064 TALLOW BASED GREASE STICK F-17 $6.50

F515-6064C 6 X TALLOW BASED GREASE STICK F-17 $34.00

TALLOW BASED GREASE STICKS GRADE F-17

An excellent metal working grease stick that provides lubrication, reduces friction, tool wear and breakage, prevents burning, welding chatter, galling and tearing. It is particularly good for saw cutting applications. It is compatible with all ferrous and non-ferrous metals. Biodegradable, non-irritating and non-toxic. Uses: Drilling, Grinding, Sawing, Tapping, Cutting, Spinning, Pipe Cutting, Machining, Lubricating Draw Dies, Pulling Wire Through Conduits, Polishing with Coated Abrasives. Packaged in 2-1/2” x 8” Silver Spiral Wound Tube.

F515-126 SLIP STICK WAX F-305 $7.50

F515-126C 6 X SLIP STICK WAX F-305 $39.00

SLIP STICK WAX

VHT High Temperature CoatingsVHT Flameproof Coatings

VHT FlameProof Coating will renew and extend the life of any surface exposed to extremely high temperatures. This unique coating is a matte finish, ceramic base silicone widely used by the automo-tive industry on exhaust systems and the aerospace industry for jet engines, re-entry vehicles, the Stealth fighter, B-2 Bomber and other high temperature applications. VHT FlameProof Coating will with-stand temperatures up to 1500°f and is ideal for use on boilers, hot water pipes, exhaust systems, franklin stoves, heaters, barbecues, furnaces or wherever an extreme temperature coating is needed.

16OZ CANS

SP-101 FLAT WHITE $9.00

SP-102 FLAT BLACK $9.00

SP-104 FLAT GRAY $9.00

SP-105 FLAT GOLD $9.00

SP-106 FLAT SILVER $9.00

SP-108 FLAT YELLOW $9.00

SP-109 FLAT RED $9.00

SP-110 FLAT BLUE $9.00

SP-113 FLAT ALMOND $9.00

SP-114 FLAT ORANGE $9.00

SP-115 CLEAR $9.00

SP-117 FLAT ALUMINUM $9.00

SP-118 WHITE PRIMER $9.00

VHT NU-CAST

VHT Nu-Cast Engine & Manifold Coatings are unique formulas developed to restore OEM parts to their original newly cast appearance. VHT Nu-Cast 1500°F Manifold Coating has all of the performance qualities of standard VHT FlameProof Coatings. VHT Nu-Cast Iron Engine & Alumi-num withstand temperatures to 500°F and are extremely resistant to chemicals, salt, corrosion and rust. 16 OZ CANS

SP-995 CAST ALUMINUM $9.00

SP-997 IRON ENGINE $7.00

SP-998 1500°F MANIFOLD $12.00

VHT WRINKLE FINISH

VHT Wrinkle Finish combines strong colors with a deep rich texture for a cus-tom look. It is temperature resistant to 350°F and is ideal for adding a touch of personal styling to almost any metal surface. VHT Wrinkle Finish resists color fading, grease, degreasers and severe weather conditions. This tough durable finish is extremely resistant to rust, corrosion, chipping and cracking. 16 OZ CANS

SP-201 WRINKLE BLACK $8.00

SP-204 WRINKLE RED $8.00

SP-205 WRINKLE GRAY $8.00

ALL VHT PRODUCTS ARE ORM-D

VHT High Temperature CoatingsVHT 550°F Engine Enamel

VHT 550°F Engine Enamels are available in a wide range of exact match factory colors. All colors have excellent du-rability and superior heat and solvent resistance. They are specially formulated to withstand corrosion, rust, salt spray, strong solvents and additives of today’s gasoline blends and degreasers.

VHT 550°F Engine Enamels are a unique blend of urethane resins which produce a tough and long-lasting finish for engines, engine accessories or wherever a tough durable heat or chemical resistant finish is needed. Ideal for use on engines, heat registers, hot pipes, farm & garden equip-ment, boats, motorcycles and watercraft.16OZ CANS

SP-120 HEMI ORANGE $7.00

SP-121 BRIGHT RED $7.00

SP-122 PONTIAC BLUE $7.00

SP-123 CHEVY ORANGE $7.00

SP-124 GLOSS BLACK $7.00

SP-125 DK FORD BLUE $7.00

SP-126 EARLY CHRYS BLUE $7.00

SP-127 UNIV ALUMINUM $7.00

SP-128 GLOSS YELLOW $7.00

SP-129 GLOSS WHITE $7.00


SP-131 FORD GREEN $7.00

SP-132 UNIVERSAL GOLD $7.00

SP-133 CHEVY V8 BLUE $7.00

SP-134 FORD LT BLUE $7.00

SP-135 GM BLUE $7.00

SP-136 LATE CHRYS BLUE $7.00

SP-137 FORD GRAY $7.00

SP-138 NEW FORD BLUE $7.00

SP-139 GM SATIN BLACK $7.00

SP-140 CADILLAC BLUE $7.00

SP-142 PNTC BLUE METAL $7.00

SP-145 CLEAR $7.00

SP-147 WHITE PRIMER $7.00

SP-148 LIGHT GRAY PRIMER $7.00

SP-756 HOT PINK $7.00

SP-758 LAVENDER $7.00

VHT STRIP FAST is the absolute best paint remover on the market today. This extremely effective formula bubbles and removes lacquers, enamels, acrylics, varnishes, powder coating and oils from metal and wood. Used by many Championship race teams and restorers.How to:Always use rubber gloves, eye protection and a respirator or facemask when using VHT Strip Fast. Spray lib-erally in a crosshatch pattern, allowing product to cover surface. Let stand for a minimum of 15 minutes and remove with a hose, scraper or steel wool. Do not use on plastic, fiberglass or other resin-based surfaces.

SP-575 STRIP FAST - 13 OZ $7.76


VHT Quality Finish CoatingsVHT Quick Coat

VHT Quick-Coat Polyurethane Enamel is a pre-mium quality coating which provides extra hide and durability for interior or exterior applications. This tough and durable coating prevents rust, corrosion on properly prepared surfaces, is fast drying, lead free and ozone safe.

SP-501 FIRE RED $7.00

SP-503 BRIGHT ORANGE $7.00


SP-505 OCEAN BLUE $7.00

SP-507 BRIGHT ALUMINUM $7.00

SP-508 BRIGHT YELLOW $7.00



SP-511 FLAT WHITE $7.00

SP-512 FOREST GREEN $7.00

SP-513 MACHINERY GRAY $7.00

SP-514 GOLD $7.00

SP-515 CLEAR $7.00

SP-519 DARK BLUE $7.00

SP-520 LIGHT BLUE $7.00

SP-521 NAVAJO WHITE $7.00

SP-523 ANTIQUE WHITE $7.00

SP-524 APPLIANCE WHITE $7.00

SP-525 SILVER CHROME $7.00

SP-526 DARK BROWN $7.00

SP-528 ALMOND $7.00

VHT Genuine Lacquer is a superior quality lacquer formulated for the ultimate in gloss and durabil-ity. This true nitrocellulose lacquer provides brilliant colors for a mirror-like finish on any wood, metal and most plastic surfaces. Nitrocellulose lacquers can be found on fine furniture, lawn & garden equipment and many vintage cars. VHT Genuine Lacquer is an excellent finish for manufactured goods and movable parts where fast drying and a minimal buildup of film thickness is required.



SP-610 CLEAR $7.50

VHT Quick-Coat Polyurethane Enamel provides a rich weather resistant gioss finish to wood, metal, sealed plaster and masonry surfaces.

16OZ CANS

VHT TrackBite sets faster, stays tacky for weeks and will not run off even in heavy rains. This original competi-tion formula will increase race competition and times better than any other track treatment available. VHT TrackBite was applied to the track surface at every NHRA & IHRA race when world drag strip records were set over the past decade.

VHT TrackBite contains no petrolium distillate, will not soften track or adversely effect tire performance or life. VHT TrackBite has been used by every major drag strip and drag racing sanctioning body since 1972.

SP-162 TRACKBITE - 1 GAL $48.00


VHT Quality Finish CoatingsVHT Epoxy Paint

VHT Epoxy Paint - All Weather contains a one-step Epoxy Ester resin which dries in minutes to provide an exceptional rust and corrosion resistant finish. The rust inhibitors which are added to this already forti-fied resin produce a rust proof barrier when applied to new or properly prepared metal substrates.

VHT Epoxy Paint - All Weather is tough enough for industrial use yet safe enough for children’s toys. Can be used Interior or Exterior, no primer required.

16OZ CANS



SP-652 SATIN BLACK $7.50

SP-653 BRIGHT ORANGE $7.50

SP-654 FIRE RED $7.50

SP-655 MARINE BLUE $7.50

SP-656 STAINLESS STEEL $7.50

SP-657 ALUMINUM $7.50

SP-658 LEMON YELLOW $7.50

SP-659 ALMOND $7.50


SP-662 METER GRAY $7.50

SP-663 JOHN DEERE GRN $7.50

SP-665 CUMMINS BEIGE $7.50

SP-666 JOHN DEERE YELLOW $7.50

SP-667 SCHOOL BUS YELLOW $7.50

SP-668 INT’L HARVESTER RED $7.50VHT Prime Coat is an excellent foundation for any enamel, epoxy, acrylic or synthetic lacquer. It provides a tough, air dry base coat with excel-

lent adhesion to intermediate and top coatings. VHT Prime Coat is specially formulated to fill scratches or pin holes caused by sanding or body fillers to form a strong corrosion barrier. VHT Prime Coat is a multi-purpose product and can be used on metal, fiberglass, ma-sonry, wood and most plastic surfaces. It is ideal for automotive, marine, aviation, home, farm and indus-trial use.

16OZ CANS

SP-301 WHITE $7.00

SP-302 DARK GRAY $7.00

SP-303 RED OXIDE $7.00

SP-304 LIGHT GRAY $7.00

SP-305 BLACK $7.00

SP-306 ZINC CHROMATE $7.00

SP-308 COLD GALVANIZING $7.00


VHT Quality Finish CoatingsVHT Brake, Caliper & Drum CoatingIdeal Applications: Brake Calipers, Brake Drums, Brake Rotor Centers and Ribs, Suspension Components

What is it? VHT BRAKE CALIPER, DRUM & ROTOR COATINGS provide a durable, heat resistant, gloss coating specifically designed for cast iron and aluminum brake applications.This durable coating will beatify the brake calipers, drums and rotors on specialty vehicles with a custom appearance. This in-novative new coating withstands 900°F temperatures, brake dust, salt and corrosion without losing its gloss luster.

How to:Clean surface thoroughly. Remove grease, oil, loose paint, rust, scale, etc. using a high grade cleaner such as VHT’s Brake Cleaner (Product #SP-11 & #SP-11-1 for use in California) or PJ1’s Super Cleaner (Product number #3-20 & 3-21 for use in California). Scuff any rusted or glossy surface with either a wire brush or steel wool. Cleanse again with high grade cleaner and let dry. Mask any surface not to be coated. Apply coating in a 70°F- 95°F environment with minimal humidity. Shake can for one minute after marble is heard. Hold can upright 12-16 inches from surface during application. Apply each coat in a crosshatch pattern. For best results, apply thin, even coats in 20- minute intervals until desired coverage is achieved.

Curing: For ideal results, VHT Brake Caliper, Drum & Rotor Coatings are best cured in an oven or Bar-B-Que by baking at 250°F for 30 minutes. This will provide a durable, solvent resistant finish. The inherent heat of operating the vehicle may also accomplish curing. Use caution not to create excessive brake dust while coating is still wet. All curing must be done slowly. Until coating is cured, product is not solvent resistant.

11 OZ CANS

SP-730 CLEAR GLOSS $8.20

SP-731 REAL RED $8.20

SP-732 BRIGHT BLUE $8.20

SP-733 REAL ORANGE $8.20


SP-735 CAST ALUMINUM $8.20

VHT Barrel Spray PaintVHT Barrel Spray Paint SP-905 Gloss Black & SP-906 Satin Black is custom formulated to restore motorcycle engines to their original factory appearance.It is extremely resistant to oil, gasoline and solvents and heat resistant to 550°F. Virtually stops rust and corro-sion while resisting chipping, cracking and fading.

SP-905 BARREL SPRAY PAINT $10.00


VHT CleanersVHT Carburetor and Choke Cleaner SP-3 is a non-chlorinated cleaner that washes away varnish and gum de-posits from injectors, chokes, linkage, intake valves and carburetors. VHT Carb and Choke Cleaner purities and lubricates throttle linkage for smooth and reliable operation.VHT Brake Cleaner & Degreaser SP-11 maximizes brake efficiency by cleaning and drying linings, drums and pads. This high pressure spray removes road film, oil and brake fluids from precision brake parts quickly.VHT Brake Cleaner & Degreaser leaves no residue and reduces disc brake squeal. It contains ozone safe propel-lants, contains no chlorinated solvents or harsh chemicals.

SP-3 CARB & CHOKE CLEANER $6.00

SP-11 BRAKE CLEANER $6.00


VHT Specialty CoatingsVHT Penetrating Color Dye

VHT Penetrating Color Dye for vinyl and carpeting is a one-step process that restores or changes the color of vinyl or short nap carpeting found in today’s boats, watercraft and automobiles. It is ideal for use on stiff or pliable vinyl, simulated leather and plastic. VHT Penetrating Color Dye is not a paint but a true dye which permanently changes the color of the substrate. It is extremely resistant to cracking or fading. Ideal for use on auto inte-riors, motor-cycle seats, boat interiors, snowmobiles, personal water-craft, household and office furniture.

16OZ CANS

SP-941 GLOSS JET BLACK $8.00

SP-942 BLACK SATIN $8.00

SP-943 WHITE SATIN $8.00

SP-944 BUCKSKIN TAN $8.00

SP-945 CHOCOLATE BROWN $8.00

SP-946 SILVER SATIN $8.00

SP-947 RED SATIN $8.00

SP-948 BURGUNDY SATIN $8.00

SP-950 DARK BLUE SATIN $8.00

SP-951 MED BLUE SATIN $8.00

SP-952 LIGHT BLUE SATIN $8.00

SP-953 LIGHT GRAY SATIN $8.00

SP-954 CHARCOAL GRAY $8.00

SP-955 SADDLE TAN $8.00

SP-956 MIDNIGHT BLUE $8.00

SP-958 DOVE GRAY $8.00

SP-959 DARK ROSE RED $8.00

SP-960 CAMEL TAN $8.00

VHT Polyurethane Wheel Paint fills the demand for beauty and pro-tection on all standard and custom wheels. Even on super-highways, wheels take a beating especially in foul weather. Salt, sand, brake dust and rocks severely damage the ap-pearance and protection of the wheels surface.This unique product is specifically formulated to resist chipping, cracking and fading while protecting the surface from oxidation. VHT Polyurethane Wheel Paint is available in eight outstanding colors for polished, plated, steel or aluminum wheels.

16OZ CANS

SP-181 ALUMINUM $7.50

SP-182 GOLD $7.50


SP-184 CLEAR COAT $7.50


SP-186 GM RALLY SILVER $7.50


SP-188 FORD ARGENT SILVER $7.50


VHT Specialty CoatingsVHT Epoxy Plate FinishVHT Epoxy Plate Finish is a unique, Quick drying formulation specifically created for application on metal, glass, wood or sealed plaster surfaces.

This non-tarnishing epoxy finish has outstanding brilliance and corrosion resistance.

VHT Epoxy Chrome Plus plate finish is easy to use and dries in minutes.Excellent for touch-up, refinishing and decorative applications.

16OZ CANS

SP-525-1 BRIGHT CHROME $8.00

SP-525-4 BRIGHT GOLD $8.00

SP-525-5 ANODIZED BRONZE $8.00

VHT NITE SHADESVHT NITE SHADES is a unique transparent black taillight lens coating for creating that custom European styl-ing. When applied to taillights, fog lights or turning indicators, VHT NITE SHADES appears black until they are lit, then the natural red re-appears. Customize lenses for only a fraction of the cost of expensive conversion kits. 7 oz Can.

SP-999 NITE SHADES $12.00ALL VHT PRODUCTS

ARE ORM-D

VHT Metal TintVHT Metal Tint is a non-tarnishing metallic coating formulated to give a plated or anodized look to alumi-num, plated or polished metal surfaces.

This unequaled product possesses outstanding brilliance and durability for interior or exterior surfaces and will withstand temperatures to 350F.

VHT Metal Tint duplicates the appearance of expensive anodized coatings, is chemical resistant and will not oxidize.

16OZ CANS

SP-231 BLUE $8.00

SP-232 RED $8.00

SP-233 GOLD $8.00

VHT Sportsman CamouflageVHT SPORTSMAN CAMOUFLAGE acrylic enamel spray paint is an ex-cellent way to revitalize existing camouflaged surfaces or create new environments. This unique, fast drying, non-glare formulation is weather resistant and is specifically made for outdoor use. The exact match col-ors are based on military specifications to provide maximum camouflage characteristics. VHT Sportsman Camouflage Spray Paint will adhere to metal, wood, masonry and most plastic surfaces.

16OZ CANS

SP-220 MIL OD GREEN $6.50

SP-221 MIL GREENISH TAN $6.50

SP-222 MILITARY BROWN $6.50

SP-223 MILITARY BLACK $6.50

SP-CK ALL 4 CAMO COLORS $22.00

Etch-O-MaticPERMANENTLY MARKS ANYTHING METAL...IN SECONDS!

ETCHES MARK INTO SURFACE — ETCH-O-MATIC will Etch into the surface of Anything made of Metal, including Tools, Instruments, Equipment or Manufactured Parts, anything that can be Typed, Written, Drawn or Photo Processed on a Special Stencil. This includes Names, Numbers, Designs, Logos, Trademarks or even Your Own Signature. Using an Electro Chemical principle, the New ETCH-O-MATIC can Etch as Deep as .003” of an Inch in Less than 30 Seconds or Mark the Hardest Tool Steel and Carbides almost Instantly. It marks any Flat or Round Metal Surface down to 1/16” Diameter and any Metal Thickness from Thin Foil up to the Largest Castings easily. Most Marks (which look like Printing or Engraving) take about 3 to 20 Seconds (the Longer Dwell Times are for Deep Etching) and are Permanently Etched into the Tool or Manufactured Part. FAST AND VERY EASY TO USE! ETCH-O-MATIC is FAST and EASY TO USE. Anyone in Your Organization can become an EXPERT in JUST MINUTES and produce Professional Looking Marks Quickly. In Fact, Etch-O-Matic is by Far the Very Easiest Marking System to Learn that is Available Today! Also, You will fi nd that ETCH-O-MATIC is not only the Fastest way to make Permanent Marks on Anything Metal, but is by Far the LEAST EXPENSIVE method on the Market Today. Your

Marks will Cost just Fractions of a Cent to Produce and You will be Extremely Pleased with the Result.

COMPARES WITH LASER MARKS Most Marks will Compare Favorably with Laser Marks on Metal and are Easier and Sometimes Even Faster to Make. In Fact You have Seen Marks made by Etch-O-Matic hundreds of times before but probably did Not Realize it since the Marks are Used so often in Commerce Today. If you have ever seen a Feeler Gauge, Drill Bit, Milling Cutter, Saw Blade, Knife Blade, Ball Bearing Race, Carbide Cutter or Thousands of other types of Metal Tools, Parts, Instruments or Equipment then You have probably seen Marks made by Etch-O-Matic. In fact, we have Marks in a good Percentage of all of the Cars, Trucks, Commercial and Military Aircraft, Submarines, Hospital Surgical Instruments and Implant Devices and we even have Marks in the Nose Cone of the Space Shuttle. (Yes, NASA called and said that they used an Etch-O-Matic to Mark an Inspection Date and Number in the Nose Cone of the Space Shuttles.)

ETCH-O-MATIC MAKES FOUR KINDS OF MARKS

ETCH-O-MATIC STARTER KIT

Lowest Priced Kit available Anywhere, Yet it Does the Job in Industry, in Plants, Machine Shops and Everywhere Metal Marking is needed. The Marker Unit is 10 volts, 2 amps and is Excellent for Light Duty Marking of Tools and Parts. (Transformer is inside marker unit)

KIT CONTAINS: ETCH-O-MATIC marker with standard head marking size 7/8” x 13/4”, electrical cord, ground plate, 2 oz. Electrolyte solution in plastic bottle, 10 special stencils, neutralizer, deep etching adapter clip and complete instructions. Each kit will make approximately 1,000 marks before refi ll sup-plies are needed.

ETCHS69 ETCH-O-MATIC STARTER KIT $69.95

VHT Specialty CoatingsVHT Plastic Paint

Ideal Applications:• Gauge Pods• Plastic door panels• Speaker covers

VHT Plastic Paint was specifi cally formulated for automotive interior plastics• Scratch Resistant• Won’t fl ake off• Withstands the heat of automotive

interiors

SP-970 WHITE $7.98

SP-971 LIGHT GRAY SATIN $7.98

SP-972 BLACK SATIN $7.98

SP-973 WHITE SATIN $7.98

SP-974 ACURA TAN $7.98

SP-975 ACURA LIGHT GRAY $7.98

SP-976 CHRYSLER TAN $7.98

SP-977 HONDA CLEAR GRAY $7.98

SP-978 FORD TAN $7.98

SP-979 FORD LIGHT GRAY $7.98

SP-980 DODGE GRAY $7.98

SP-981 MITSUBISHI DARK GRAY $7.98

SP-982 SUBARA LIGHT GRAY $7.98


Plasti DipMulti Purpose Rubber Coating

Coat anything with a flexible rubber coating.

* Flexible - won’t crack, chip or become brittle * Insulates from electrical shock, vibration, heat and deadens sound. * Provides safe, non-slip comfort and control. * Durable - resists weather, chemicals, impact and abrasion. * Can be applied by dipping or brushing * Available in red, yellow, black, blue, white and clear. * 14.5 oz covers approx 5 sq ft at 10 mils. * Available in 14.5oz and 7.25oz cans.

PDIP11601 PLASTI DIP RED 14.5 OZ $6.49

PDIP11602 PLASTI DIP YELLOW 14.5 OZ $6.49

PDIP11603 PLASTI DIP BLACK 14.5 OZ $6.49

PDIP11604 PLASTI DIP BLUE 14.5 OZ $6.49

PDIP11607 PLASTI DIP WHITE 14.5 OZ $6.49

PDIP11609 PLASTI DIP CLEAR 14.5 OZ $6.49

PDIP18Z01 PLASTI DIP RED 7.25 OZ $5.32

PDIP18Z02 PLASTI DIP YELLOW 7.25 OZ $5.32

PDIP18Z03 PLASTI DIP BLACK 7.25 OZ $5.32

PDIP18Z04 PLASTI DIP BLUE 7.25 OZ $5.32

PDIP18Z07 PLASTI DIP CLEAR 7.25 OZ $5.32

PDIP18Z09 PLASTI DIP RED 7.25 OZ $5.32

Brush On Insulation

* Trouble Free - Won’t unravel like tape. Seals out moisture, salt...permanently. * Convenient - Applicator brush in cap. Easy to apply. * Flexible Rubber Formula. Won’t crack, peel or harden like competitors’ vinyl. * Available in Red, Black, Green & White. * 4oz can

PDIPLET14Z01 LIQUID TAPE RED 4 OZ $5.93

PDIPLET14Z03 LIQUID TAPE BLACK 4 OZ $5.93

PDIPLET14Z06 LIQUID TAPE GREEN 4 OZ $5.93

PDIPLET14Z07 LIQUID TAPE WHITE 4 OZ $5.93

Plasti Dip Spray On Coating

Coat anything with a flexible rubber coating.

* Flexible - won’t crack, chip or become brittle * Insulates from electrical shock, vibration, heat and deadens sound. * Provides safe, non-slip comfort and control. * Durable - resists weather, chemicals, impact and abrasion. * Available in red, yellow, black, blue, white and clear. * Covers approx 5-10 sq ft * 11oz can

PDIP11201 PLASTI DIP SPRAY RED 11 OZ $6.11

PDIP11202 PLASTI DIP SPRAY YELLOW 11 OZ $6.11

PDIP11203 PLASTI DIP SPRAY BLACK 11 OZ $6.11

PDIP11204 PLASTI DIP SPRAY BLUE 11 OZ $6.11

PDIP11207 PLASTI DIP SPRAY CLEAR 11 OZ $6.11

PDIP11209 PLASTI DIP SPRAY RED 11 OZ $6.11

ALL PLASTI DIP PRODUCTS ARE

ORM-D

Plasti DipVinyl Repair Patch Kit

* Convenient - Easy to apply. Quick Dry. Patch Included * Versatile - Use on all vinyl. Repair pool liners, even under water * Flexible - Won’t become brittle * High Strength Formula - Stronger than original vinyl. * 1 oz Tube

PDIP71Z09 VYNA BOND 1 OZ $3.13

Vinyl/Leather Repair

* High strength Formula - Stronger than original vinyl * Versatile - Use on all vinyl, leather & fabric (test first) * Flexible - Weather resistant, waterproof formula won’t become brittle * Clear - Resists yellowing. Matches all colors. * 1 oz Tube

PDIP61Z09 VLP 1 OZ $3.13

Weatherproof Fabric Seam Sealer

* Weatherproofs - Seals out moisture, wind and dirt on outdoor gear. * Convenient - No-mess applicator. Easy to apply. Quick Dry * Flexible - Won’t become brittle * Verstatile - Clear formula. Use on all nylon/synthetic fabric seams (test first) * 2 oz bottle

PDIP82Z09 PLASTI SEAM 2 OZ $6.10

Non-Skid Fabric Coating. Stop rugs from slipping on floor surfaces.

* Durable Rubber Formula - Machine Washable. Stays Flexible * Safety - Stops Skidding. Won’t shift like other non-skid products * Versatile - Properly applied to fabric first, stops skidding on all types of floor surfaces: wood, ce-ramic, concrete.... * Convenient - Easy to apply. * Clear color. * 11.5 oz can

PDIP91209 SUPER GRIP 11.5 OZ $6.14

ALL PLASTI DIP PRODUCTS ARE

ORM-D

GlyptalThe outstanding all-purpose paint

Although 1201 was originally developed as an insulating paint for electrical applications such as the treatment of coils and armatures, its outstanding resistance to corrosion, moisture, oil, acid, heat, dust and salt spray has made it popular throughout industry as a Primer, Sealer, Adhesive and Protective Finish. There are literally hundreds of uses for 1201.

Some of the more typical industry uses include:

* Primer for structural iron and steel . General plant maintenance . Sealer for concrete floors * Primer and finish for motor, generator, and transformer housings * Anti-moisture coating on thermostat, water cooler, and truck control parts * Sealer for pipe and stud threads and vacuum systems * Anti-corrosion protection for winches ~nd other outdoor apparatus * Electrical insulation for coils and armatures . Adhesive for gaskets * Coating for interior of hydraulic tanks, and bearing cases. * Superior performance from a superior paint. * Exhaustive tests conducted at the Glyptal laboratories confirm consis-tently favorable customer experience with 1201: o Meets Requirements of MIL-E-22118 o Flexibility is far superior to competitive red sealers on both backed and air-dried films. 1201 can take rugged impact.

o Water Resistance is excellent. o Prolonged Aging doesn’t crack 1201’s film, leaves no place for destructive agents to get in. o Fast Drying 1201 is tack-free in about thirty minutes at room temperature, can be baked to a beautiful smooth finish. o Heat Resistance. 1201 has got it, can withstand continuous 135°C temperatures for months. o Prolonged Heat. After 3700 hours at 35°C, there is no change in dielectric strength. o Toughness. High-gloss paints have a tender film. 1201 has a low-gloss finish, designed for great resistance to abrasion. o Adhesion. 1201 hangs on, stays where it’s put-on metals, ceramic, porcelain, concrete, fibres, and wood. o Dielectric Strength is rated at 1500 volts per mil, permits thinner coating than most competitive paints. o Arc Resistance, even with air-dried films, is 480 seconds.

G1201 GLYPTAL BRUSH ON RED ENAMEL 1 QUART $21.99

G1201A GLYPTAL SPRAY ON RED ENAMEL 12.75 OZ $21.99

BC200 Sandblasting Cabinet

SB5 Pressure Blaster

Product Description: • Heavy steel construction. • Blast away dirt, rust,

paint or any foreign buildup on large parts in an enclosed cabinet while keeping dust off the floor and separated from open air.

• Heavy duty industrial blast gun ensures high work efficiency.Single or double side door openings allow for easy access.

• Transparent glass viewing

window and fluorescent light gives you better visibility. • Air requirement: Minimum 12CFM @ 40-80 PSI • Work AREA:34/22 inches • Overall Dim:37/24/55 inches • Carton Dim(1PC/CTN):38/25/27 inches • GW/NW 128/121 lbs

BC200 BLASTING CABINET $325.00

Product Description: • Teams up with an air

compressor to spray granular abrasives at high pressure.

• Equipped with a nozzle and shut-off valve, pressure gauge,4 assorted ceramic nozzles, 1/4” and 3/16” diam 2.5m hose, filling funnel,water trap, 6” rubber wheels,and canvas hood.

• Has safety relief valve, 3/8” brass valves for air

throttling and sand metering. • Air Requirement:6-25CFM @ 60-125PSI • Tank Dia:10.5 inches • Overall Dim:14/14/30 inches • Weight:29 lbs • Carton Dim:26/16/14 inches

SB5 PRESSURE BLASTER $165.00

Tech Line CoatingsTech Line products allow virtually anyone to benefit from advanced coating technology. Easy simple application, using common equipment, allows the enthusiast to duplicate the results achieved by professional shops. Coatings offered are either air dry-ing or if requiring baking, utilize water as the solvent. This user friendly approach means that no “smelly” or toxic fumes are released during oven baking.

Exhaust System CoatingsTECH LINE COATINGS makes available a full range of exhaust system coatings that can be applied at home. TECH LINE COAT-INGS offers the most technologically advanced coatings on the market. These coatings include the most popular type of coat-ing in use today, a metallic ceramic. These coatings are the same products being applied by professional coating shops and give the individual the opportunity to benefit from this advanced technology at both a cost and time savings.

Coverage(APPROXIMATE) ALL EXHAUST SYSTEM COATINGS

SMALL V8 HEADERS AND CAST IRON MANIFOLDS 4 OZ. PER PAIR

MEDIUM V8 HEADERS 6 TO 8 OZ. PER PAIR

LARGE V8 HEADERS 10 TO 12 OZ. PER PAIR

BLACK SATIN (BHK) Black Satin is the most advanced exhaust system coating availableWithstands 2000f temperatures Easy to apply ceramic reinforced coating designed for high temperature applications Reduces underhood temperatures, reduces exhaust manifold surface temperatures Improve exhaust gas velocity, increase H.P. Air drying, requires no baking Coverage: See above

TL1004 BLACK SATIN HEADER COATING 4OZ $19.95

TL1012 BLACK SATIN HEADER COATING 12OZ $49.95

COLORGARDExtreme temperature exhaust system coating. Available in several colors (see below) Reduces underhood temperatures, reduces exhaust manifold surface temperatures Improve exhaust gas velocity, increase H.P. Air drying, requires no baking Coverage: See above

TL1104 COLORGARD ALUMINUM 4OZ $19.95

TL1204 COLORGARD CAST IRON 4OZ $19.95

TL1304 COLORGARD TITANIUM 4OZ $19.95

TL1312 COLORGARD TITANIUM 12OZ $49.95

Tech Line CoatingsTech Line products allow virtually anyone to benefi t from advanced coating technology. Easy simple application, using common equipment, allows the enthusiast to duplicate the results achieved by professional shops. Coatings offered are either air dry-ing or if requiring baking, utilize water as the solvent. This user friendly approach means that no “smelly” or toxic fumes are released during oven baking.

Internal Engine CoatingsTECH LINE makes available a full range of power enhancing coatings for internal engine parts that can be applied at home. These coatings are the same products being applied by professional coating shops and give the individual the opportunity to benefi t from this advanced technology at a cost and time savings.

INCREASE TORQUE AND HORSEPOWER, INCREASE PART LIFE, REDUCE FRICTION AND WEAR

DFL-1 POWERKOTE (Dry Film Lubricant) High pressure lubricant Reduces friction, galling and scuffi ng.Increases part life Requires no clearance changes to compensate for the coating Apply to any part subject to sliding or rotating friction Excellent for use on bearings Water based no hazardous fumesRequires baking. Cures at 300f minimum.Must be oven cured

TL2107 Powerkote Dry Film Lubricant 7OZ $29.95

CBC1 POWERKOTE (Cermet Coating Thermal barrier)Designed for Performance engines.Thermal barrier coating Reduce part temperature. Keeps heat in combustion chamber longer through the power strokeIncrease torque and H.P. Increase combustion chamber effi ciency Reduce fuel consumption Water based no hazardous fumes, non fl ammable Requires baking. Cures at 300f for 1 hour. Must be oven cured

TL2213 POWERKOTE CERMET THERMAL BARRIER 3OZ $29.95

WSX POWERKOTE (Lubricant) Designed for cylinder walls, lifter bores and valve guides Extreme pressure and temperature lubricantCan carry loads up to 350,000 psi Requires NON BAKING, simply buff on Reduces friction and wear, improves ring seal and leak down Bonds at 20 millionth of an inch

TL3401 POWERKOTE WSX LUBRICANT 1OZ $24.95

Tech Line CoatingsTech Line products allow virtually anyone to benefit from advanced coating technology. Easy simple application, using common equipment, allows the enthusiast to duplicate the results achieved by professional shops. Coatings offered are either air dry-ing or if requiring baking, utilize water as the solvent. This user friendly approach means that no “smelly” or toxic fumes are released during oven baking.

Assembly and Gear LubricantsGEL TECH lubricants are specially formulated to provide Ultra High Anti Wear and Anti Scuff properties.

ULTRA GEL TECH Assembly Lubricant Extreme load lubricant Protects bearings, cam, crank, valve stems, push rod ends, lifters etc. THE choice for Top Fuel and Alcohol Suitable for all types of engines, two of four stroke, rotary, supercharged, turbo charged or normally aspirated.

ULTRA X Gear LubricantLight weight / high pressure lubricant Use in drag racing applications for less friction and drag Excellent in Std transmissions using ATF Reduces friction and drag May be used in power steering units. Excellent for Circle Track and Off Road applications

Specialty Coatings

IC-1 INSULATING COATINGDesigned to reduce thermal transfer Excellent for floor boards and firewalls to reduce heat transfer Reflective to heat Excellent thermal barrier Requires NO Baking, Air Dries

Turbo XThese air drying coatings were developed specifically for Turbo applications. These are made with very high temperature stable pigments as well as ceramics for increased thermal barrier function. They are solvent based and available in 8oz con-tainers. The coating is available in Black and Blue.

Engine Oil Additives

ULTRAGARD UltraGard is a high pressure engine oil additive. Rather than treating the oil or treating the ferrous metals parts, UltraGard puts sub micron Moly in suspension. The lubricants are capable of carrying loads in excess of 350,000 psi. In addition the lubricating particles are attracted to heat and migrate to areas of high friction and load. UltraGard does not require that a full bottle be added with each oil change. Generally one bottle treats 6 quarts of oil and the next three oil changes will only require 1/3 bottle.

TL10103 ULTRA GEL LUBRICANT 3OZ $8.95

TL10108 ULTRA GEL LUBRICANT 8OZ $19.95

TL14006 ULTRAGARD 6OZ $14.95

TL7032 INSULATING COATING 1QT $60.00

TL17032 ULTRA X LUBRICANT 1QT $18.95

TL18008 TURBO X BLACK 8OZ $49.95

TL19008 TURBO X BLUE 8OZ $49.95

Tech Line CoatingsBake On Ceramic Coatings

CermaBlue, CermaSSteel, CermaKrome • Metallic Ceramic Coating • Excellent corrosion protection • Tested to over 1300f base metal temperatures/1600f Exhaust gas temperatures • Polishable and provides a variety of colored finishes depending on the polishing time. • Water based with no flammable solvents. • Can be applied to any metal that can handle the cure temperature, except magnesium • Available in quarts • Requires baking. Cure temperature 500f for 1hour minimum.

TL2532 CERMABLUE 1 QT $88.00

TL2632 CERMASSTEEL 1 QT $88.00

TL1732 CERMAKROME 1 QT $88.00

CermaWhite™ is a two component ceramic coating system, designed for high temperature applications. CermaWhite will impart a chalk white finish to the coated substrate. CermaWhite may be polished to a near porcelain appearance. CermaWhite has been furnace tested at over 1600f with no discoloration or delamination.

CermaWhite may be applied directly to bare metal or other substrate. CermaWhite is flexible and will not delaminate, yellow, crack or peel when properly applied. CermaWhite is applied at a film thickness of .0015 or greater. CermaWhite will air cure in approximately 5 days, allowing CermaWhite to be used on parts/structures that cannot be oven cured. CermaWhite has the ability to stop rust when applied to previously painted substrates after heavy scale, rust and other loose debris was removed. CermaWhite may be oven cured after a short air-drying period at a temperature over 200f. CermaWhite is a very low VOC material containing less than 1.2 lb/gal. CermaWhite may be applied by spray or dip.

CermaWhite is considered non hazardous by EPA definitions. CermaWhite contains no lead or chromates. • PROTECTIVE TO ABOVE 1800F. � Maintains adhesion to base metal temperatures in excess of 1800f. � Protects in environments over 2000f. • SOLVENT RESISTANT � Passed 500 double rubs with Acetone, and MEK • HIGHLY RESISTANT TO THERMAL SHOCK � Survives cyclic heating and cooling, oil and water quenching • CORROSION RESISTANT � 2000 hr. salt spray capability. Resistant to most chemicals. • ACID RESISTANT � No blistering, cracking or flaking after 30-minute submersion in both Hydrochloric acid (10%) and Sulfuric acid (10%) • FLEXIBLE � Survives bending and flexing

TL61032 CERMAWHITE 1 QT $88.00

Cyclone Blasting EquipmentFloor Models

3024 Side Door Opening Blaster

Overall Dimensions 59”H x 30-1/2”D x 24-1/2”W

Working Dimensions 24”H x 30”D x 24”W

Dust Collector 3-1/2 Gallon Vac

Electrical Requirements 110 VAC

Side Door 18” x 12”

Construction 18 Gauge Steel

Window 7” x 18”

Air Requirements 14 CFM @ 90-100 PSI

Shipping Weight 130 Lbs.

Gloves 18”

Operation Trigger Gun

CY3024 SIDE DOOR OPENING BLASTER $595.00


Overall Dimensions 38-1/2”W x 24-1/2”D x 58”H

Working Dimensions 38” x 24”

Dust Collector DC1500




Window 25 1/2 “ x 10 5/8”

Air Requirements 14 CFM @ 100 PSI


Gloves 24”

Operation Foot Pedal



Overall Dimensions 60”L x 35”W x 63”H



Side Door See Right


Window 45”W x 12 1⁄4”H Laminated Safety Glass



Gloves 24”


Lighting 2 Incandescent Fixtures



3624 Top Opening Blaster

Overall Dimensions 59”H x 37”W x 25”D

Working Dimensions 24”H x 36”W x 24”D




Window 7” x 18”



Gloves 24”


CY3624 TOP OPENING BLASTER $795.00

4224 Full Top Opening Blaster


Working Dimensions 24”H x 42”W x 24D




Window 7” x 18”



Gloves 24”


CY4224 FULL TOP OPENING BLASTER $995.00

4826 Full Top Opening Blaster

Overall Dimensions 481⁄2”W x 261⁄2”D x 58”H

Working Dimensions 48” x 26”




Window 25 1/2 “ x 10 5/8”



Gloves 24”


CY4826 FULL TOP OPENING BLASTER $1175.00


PK36 Side Door Opening Blaster

Overall Dimensions 36” x 24” x 58”

Working Dimensions 36” x 24” x 16”

Max Workpiece Weight 125 lbs.

Side Door See Drawing


Construction Heavy Duty Plastic

Window 23” x 13”



Gloves 18”


PK36 SIDE DOOR OPENING BLASTER $299.00

4040 Full Top Opening Blaster With Side Door







Window 25-1/2” x 10-5/8”



Gloves 24”


CY4040 FULL TOP OPENING BLASTER WITH SIDE DOOR $1995.00

DC1500 Dust Collector

Overall Dimensions 53-12” x 16-1/2” Dia


Hose 6’ with 2-1/4” Hose Ends

Horsepower 1.5 HP

Filter Weighted Bag


DC1500 DUST COLLECTOR $187.00

Cyclone Blasting EquipmentBenchtop Models

PBH1000 Pencil Blaster

Overall Dimensions 18”H x 16-1/2”W x 12-1/2”D



Window 13 3/4” x 9 3/4”

Air Requirements 1-1⁄2 CFM @ 80-90 PSI


Gun Assembly Pencil

Lighting Receptical for 25 Watt Tube Lamp

PBH1000 PENCIL BLASTER $145.00

PBH2000 Pencil Blaster


Working Dimensions 14”H x 22-1/2”W x 18”D


Window 20 1/4” x 16 1/4”

Air Requirements 1/2 CFM @ 80-90 PSI


Gun Assembly Pencil

PBH2000 PENCIL BLASTER $175.00

PBH1000-LTC Pencil Blaster




Window 13 3/4” x 9 3/4”

Air Requirements 1-1⁄2 CFM @ 80-90 PSI


Gun Assembly Pencil, Foot Pedal Controlled

Lighting Receptical for 25 Watt Tube Lamp

PBH1000LTC LTC PENCIL BLASTER $179.00

TF1000 Benchtop Blaster




Window 20-1/4” x 16-1/4”

Dust Collector 3-1/2 Gallon Wet/Dry Vacuum


Gun Assembly Trigger; 5 CFM @ 80-90 PSI

TF1000 BENCHTOP BLASTER $190.00

Cyclone Blasting EquipmentBenchtop Models

PBH2000C Combination Blaster




Window 20 1/4” x 16 1/4”

Trigger Gun 14 CFM (5 CFM optional) @ 80-90 PSI

Pencil Gun 1-1/2” CFM @ 80-90 PSI;External Bottle for Abrasive;

Fine AbrasivesMore Precise Blasting (1/8”

blast pattern)


PBH2000C COMBINATION BLASTER $205.00

TF5000 Benchtop Blaster

Overall Dimensions 30” W x 20” D

Overall Height 26” Rear - 18” Front

Working Dimensions 28” W x 18” D

Working Height 16” Rear - 12” Front


Window 24” x 14”


Dust Collector 3-1/2 Gallon Web/Dry Vacuum


Gun Assembly Trigger

TF5000 BENCHTOP BLASTER $239.00

PT40 Pressure Blaster

* Sand Capacity: 40 lbs. * Tank Diameter: 12” * Tank Height: 10” * Overall Height: 13-1⁄2” * Hose: 8 feet of 3/8” ID Hose * Nozzle: 1/8” Ceramic * Air Requirements: 23 CFM @ 100 PSI * Shipping: 38 lbs. UPS * Misc: Gauge-pressure relief valve, Goggles

PT40 PRESSURE BLASTER $299.00


* Sand Capacity: 100 lbs. * Tank Diameter: 12” * Tank Height: 23” * Overall Height: 29” * Hose: 10 feet of 1⁄2” ID Hose * Nozzle: 1/8” Ceramic * Air Requirements: 23 CFM @ 100 PSI * Shipping: 69 lbs. UPS * Misc: Gauge-pressure relief valve, Goggles


Cyclone Blasting EquipmentMobile Blasters


* Sand Capacity: 250 lbs. * Tank Diameter: 12” * Tank Height: 30” * Overall Height: 36” * Hose: 25 feet of 1⁄2” ID Hose * Nozzle: 1/4” Ceramic * Air Requirements: 88 CFM @ 100 PSI * Shipping: 125 lbs. UPS * Misc: Gauge-pressure relief valve, Goggles


The Mobile Siphon Fed 1200 Blaster

* Sand Capacity: 100 lbs. * Tank Diameter: 12” * Tank Height: 30” * Overall Height: 24 3/4” * Hose: 10 feet * Gun Assembly: Trigger gun * Air Requirements: 14 CFM @ 80-90 PSI * Shipping: 12 lbs. UPS * Misc: Goggles, Dust Mask

Efficient and economical blasting!

CY1200 SIPHON FED BLASTER $67.00

Sandblast Kit

* Trigger gun Assembly requires 14 CFM @ 80-90 PSI * Weighs 2 Lbs. and can be shipped UPS. * Comes with 10’ of pickup hose * 3 extra blast nozzles * 1 extra blast oriface * Allen wrench.

CY7003 SANDBLAST KIT $19.95

BB100 Bottle Blaster

* Pencil gun assembly, foot pedal operated. * Requires 11⁄2 CFM @ 80-90 PSI * Weighs 5 Lbs. and can be shipped UPS. * Tyvek hood * Safety Goggles * 20 oz. bottle on sturdy holding plate.

BB100 BOTTLE BLASTER $69.00

Blasting MediaCLEANING Removes rust, corrosion, and paint without effecting dimensional tolerances.FINISHING While the surface is being cleaned, imperfections and machining marks are blended in.PEENING The abrasives pounding effect adds strength to the metals surface, prolonging the working life.DEBURRING A moderate deburring effect takes place during cleaning to smooth sharp edges.FROSTING A frosting effect will take place on glass and plastic.ENGRAVING As you spray the part, depending on the length of penetration, an engraving effect will occur.

GLASS BEADS

CODE DESCRIPTION SIZE PRICE

CY5002 60-100 Grit Medium Glass Beads 50 LBS PAIL $35.25

CY5009 40-60 Grit Coarse Glass Beads 50 LBS PAIL $37.25

CY5010 100-170 Grit Fine Glass Beads 50 LBS PAIL $36.25

CY5011 170-325 Grit Extra Fine Glass Beads 50 LBS PAIL $28.50

CY5060 60-100 Grit Glass Beads 50 LBS BOX $28.50




WALNUT SHELLS

CY5015 Walnut Shells (20-30 grit) 50 LBS $50.00



BLACK SILICON CARBIDE

CY5018 120 Grit Black Silicon Carbide 50 LBS $72.00








WHITE ALUMINUM OXIDE

CY5006 240 Grit White Aluminum Oxide 50 LBS $75.00

CY5028 150 Grit White Aluminum Oxide 50 LBS $75.00

OTHER ABRASIVES

CY5012 40-70 Grit Crushed Glass 50 LBS $33.00

CY5013 50-80 Aluminum Oxide and Glass Bead Mix 50 LBS $60.00

CY5014 80-100 Grit Aluminum Oxide and Glass Bead Mix 50 LBS $55.00

CY5008 55 Grit Blasting Garnet 50 LBS $20.00

Blasting MediaBROWN ALUMINUM OXIDE

CODE DESCRIPTION SIZE PRICE

CY5007 80 Grit Brown Aluminum Oxide 50 LBS $42.00














Filtering ProductsThis kit is a great addition to your nickel or Copy Chrome™ tank. Constant agitation and constant filtering from a submersible pump. Charcoal sack fits inside filter case to remove organic contaminants.Foam filter removes sediments and solids.No need to use air agitation.After charcoal filtering, add brightener.Brightener treats 1.5 Gal

CONTAINS:1 x Filter Agitator1 x 150gm Activated Charcoal1 x 8oz Nickel/Copy Chrome Brightener

NFK NICKEL/COPY CHROME™ FILTER SYSTEM $20.00

BOYUCHAR ACTIVATED CHARCOAL 150 GM $1.50

NKBR10 NICKEL/COPY CHROME™ BRIGHTENER TREATS 1.5 GAL $10.00

FP10 FILTER/AGITATOR PUMP $10.00

Ceramic HeatersThese ceramic heaters have no thermostat and will rapidly bring solutions to a boil. Their design allows them to fit right down into the solutions, eliminating problems hanging glass heaters over the tank edge. They won’t break or shatter like glass heaters and heat up much faster.

Because they have no thermostat, they should only be used when the solution requires boiling.

CH50W CERAMIC HEATER 50 WATT $10.00

CH300W CERAMIC HEATER 300 WATT $12.00

Vibratory Tumblers

Related Products: Tumbling Media - Page 76

Vibratory tumbling is an economical mass finishing technique which gives you a more uniform finish on large quantities of parts in much less time than stan-dard hand finishing, without the mess. It holds the overall shape of the pieces better and allows you to check the progress of the work without stopping the unit. Compact, yet durable, these vibratory tumblers are donut shaped for uniform polishing & maximum coverage, The heavy polyethylene bowls remove eas-ily and quickly for emptying. All units have two valves and a strainer for optional flow through operation.

Ball-bearing motors operate at relatively low noise levels, have thermal overload protection and are 3000rpm @ 60Hz. One year warranty. Made in USA.

Replacement Bowls are available - ask for prices

The selection of media and compounds shown below are specifically designed to accomplish the finishing needs of the small plating shop. Proper selection is important to achieve the desired results. Try adding some Flitz Tumbler/Media Additive in with your media.

3 Quart SizeRemovable Heavy Polyethylene Bowl With LidBall Bearing motor operates on 115 volts. Thermally protected, uses 1.12 Amps3 qt. capacity 125-400 cartridge cases wt. capacity 10 lb.Vibrates at 3000 VPMMass creates a cyclonic effect, moves around the bowl and down into the center.Dimensions 10” diameter x 11” high.Shipping wt. - 10 lb.

6 Quart SizeRemovable Heavy Polyethylene Bowl With Lid1.5 Gallon Capacity Weight Capacity 18lb 200-700 Cartridge CasesMass creates a cyclonic effect, moves around the bowl and down into the center.Motor 115 Volts. Thermally protected, uses 1.6 AmpsVibrates at 3000 VPMOverall Dimensions - 11 1/2” Dia x 12 1/2” High.Shipping wt 18 lb

4-3/4 Gallon SizeRemovable Heavy Polyethylene Bowl With LidVariable Amplitude for desired finish during deburring.4 3/4 Gallon Capacity - Weight Capacity 57lb. 1000 - 30.06 CasesMass creates a cyclonic effect, moves around the bowl and down into the center.Ball Bearing Motor operates on 115 volts. Thermally Protected 1/20 hp uses 1.6 Amps.Vibrates at 3000 VPMOverall Dimensions - 17” Dia x 18” HighShipping wt. 26 lb.

VT47786 VIBRATORY TUMBLER - 110V 3 QT $195.00

47786X VIBRATORY TUMBLER - 220V 3 QT $220.00

VT47787 VIBRATORY TUMBLER - 110V 6 QT $250.00

47787X VIBRATORY TUMBLER - 200V 6 QT $255.00

VT47788 VIBRATORY TUMBLER - 110V 4.75 GAL $530.00

47788X VIBRATORY TUMBLER - 200V 4.75 GAL $550.00

Tumbling Media

Ceramic Triangles 1/4”Coarse aluminum oxide used wet Aggressive heavy cut down removes heavy flash Recommended for heavy cut-down & de-burring Cycle Time: 3-5 hours

Ceramic Triangles 1/4”Medium silica used wet Standard cut-down removes file and grind marks 1st step in normal cut-down. Cycle Time: 3-5 hours

Ceramic Triangles 1/4”Fine silica - used wet Light cutting prepares surface for polishing or plating2nd step in normal cut-down. Cycle Time: 2-4 hours

Rouge-treated Walnut shell Non-abrasive rouge used dry Dry coloring media for final finish3rd step in finishing process. Leaves some rouge residue Cycle Time: 5-15 hours

Untreated Corn CobNon-abrasive used dry Dry coloring media for final finish 3rd step in finishing process. Cycle Time: 5-15 hours

Meta Polish Treated Corn CobNon-abrasive used dryFaster polishing than untreated 3rd step in finishing process. Cycle Time: 1-5 hours

CTD40 CERAMIC TRIANGLES - COURSE 5 LB $28.50

CTD30 CERAMIC TRIANGLES - MEDIUM 5 LB $28.50

CTD20 CERAMIC TRIANGLES - FINE 5 LB $28.50

RW47769 ROUGE TREATED WALNUT 5 LB $20.00

CC17 UNTREATED CORN COB 5 LB $17.00

MPCC20 META POLISH TREATED CORN COB 5 LB $20.00

CD & Plastic Polishing KitNow you can easily buff scratches and haze from plastics including CD’s, eye-glass lenses, plastic auto moldings, and much more.

First, buff the part with the heavy cutting buffing compound (white) and the loose cotton wheel. Finally, buff with the blue compound and a Canton Flannel wheel. This wheel is extremely soft and will produce a brilliant shine. The buff-ing rake enables you to keep the wheels clean.

Kit contains:

1 x 1/3hp buffing machine4 x 6” Loose Cotton wheels4 x 6” Canton Flannel wheels1 x buffing rake2 large bars Blue Buffing Compound2 large bars White Buffing Compound

BUFCDK CD & PLASTIC BUFFING KIT $119.00

Perma-Coil Thread Repair KitsPerma-Coil helically coiled inserts are made of stainless steel wire that has been rolled to a carefully controlled thread form. When installed, Perma-Coil inserts adjust to a tapped hole, becoming a functional thread with a strength exceeding the original.

Perma-Coil inserts and repair kits are designed to repair stripped threads in a variety of met-als. Aluminum, aluminum alloys, steel and cast iron. If the original threads can be stripped, Perma-Coil inserts can repair them. By following the detailed instructions enclosed in every Perma-Coil kit, even an inexperienced do-it-yourselfer can repair stripped threads, perma-nently.Perma-Coil Kits Include: Tap Tool, Installation Tool, Inserts

PROD PC1208-014 Perma-Coil Kit - Inch Coarse Thread 4-40 x .168 $23.84



PROD PC1208-018 Perma Coil Kit - Inch Coarse Thread 8-32 x .246 $19.31



PROD PC1208-104 Perma-Coil Kit - Inch Coarse Thread 1/4-20 x .375 $19.31

PROD PC1208-105 Perma Coil Kit - Inch Coarse Thread 5/16-18 x .469 $19.31


PROD PC1208-107 Perma Coil Kit - Inch Coarse Thread 7/16-14 x .656 $20.79




PROD PC1208-112 Perma Coil Kit - Inch Coarse Thread 3/4-10 x 1.125 $41.63

PROD PC1208-201 Perma Coil Kit - Inch Fine Thread 10-32 x .285 $26.73

PROD PC1208-204 Perma-Coil Kit - Inch Fine Thread 1/4-28 x .375 $26.73

PROD PC1208-205 Perma Coil Kit - Inch Fine Thread 5/16-24 x .469 $26.73




PROD PC1208-210 Perma Coil Kit - Inch Fine Thread 5/8-18 x .938 $37.17

PROD PC1221-305 Perma-Coil Kit - Metric M5 x 0.8mm x 7.5 $24.50

PROD PC1221-306 Perma-Coil Kit - Metric M6 x 1mm x 9 $24.50

PROD PC1221-308 Perma-Coil Kit - Metric M8 x 1.25mm x 12 $23.03

PROD PC1221-309 Perma-Coil Kit - Metric M9 x 1.25mm x 13.5 $28.21

PROD PC1221-310 Perma-Coil Kit - Metric M10 x 1.5mm x 15 $28.21

PROD PC3221-M1215 Perma-Coil Kit - Metric M12 x 1.5 x 18 $44.31

PROD PC3221-M10F Perma Coil Kit - Metric M10 x 1.25mm x 15 $35.19

PROD PC3221-M12C Perma-Coil Kit - Metric M12 x 1.75mm x 18 $31.91

PROD PC3221-M12F Perma Coil Kit - Metric M12 x 1.25mm x 18 $44.31

PROD PC1208-404 Perma-Coil Kit For Harley Davidson 1/4-24 x .5 $30.36

PROD PC1208-406 Perma Coil Kit For Harley Davidson 3/8-20 x .375 $31.74

PROD PC1214-414 Perma-Coil Spark Plug Kit (Inserts Sold Seperately) M14 x 1.25 $50.66

PROD PC1218-500 Perma-Coil Spark Plug Kit M18 x 1.5 $69.40

PROD PC2200-14 Perma-Plug Kit (Contains 1 Short Reach, 1 Normal, 1 Long Insert)

M14 x 1.25 $29.01

Perma-Coil Spark Plug Kits: Can be used with taper seat or gasket type spark plugs, Works in aluminum or cast iron, No drilling needed, Includes tapping tool and installation tool., Inserts included unless specified below.

Perma-Coil Thread Repair Inserts

Code Name # In Pack

Size Price

PC208-014 Perma-Coil Insert Kit - Inch Coarse Thread 12 4-40 x .168 $3.83



PC208-018 Perma Coil Insert Kit - Inch Coarse Thread 12 8-32 x .246 $3.83



PC208-104 Perma-Coil Insert Kit - Inch Coarse Thread 12 1/4-20 x .375 $3.83

PC208-105 Perma Coil Insert Kit - Inch Coarse Thread 12 5/16-18 x .469 $4.79




PC208-109 Perma Coil Insert Kit - Inch Coarse Thread 6 9/16-12 x .844 $7.79


PC208-112 Perma Coil Insert Kit - Inch Coarse Thread 4 3/4-10 x 1.125 $9.67

PC208-201 Perma Coil Insert Kit - Inch Fine Thread 12 10-32 x .285 $3.83

PC208-204 Perma Coil Insert Kit - Inch Fine Thread 12 1/4-28 x .375 $3.83






PC206-305 Perma-Coil Insert Kit - Metric 12 M5 x 0.8mm $3.83

PC206-306 Perma-Coil Insert Kit - Metric 12 M6 x 1mm $3.83





PC106-612 Perma Coil Insert Kit - Metric 6 M12 x 1.25mm $5.10

PC2214-S Perma-Plug Short Reach Insert 1 M14 - 1.25 x 3/8” $2.24

PC2214-N Perma-Plug Normal Reach Insert 1 M14 - 1.25 x 1/2” $2.24

PC2214-L Perma-Plug Long Reach Insert 1 M14 - 1.25 x 3/4” $2.24

Marque d’Elegance Auto Wax Proven protection for your valued vehicle. Car enthusiasts like IMSA sportscar racing veteran Tim Mc-Adam demand a wax that is proven to protect in the most demanding environments, rain or shine, on track or on the street. They’ve discovered that Collinite Marque d’Elegance gives their valuable automo-tive investments a blinding, lasting shine because it’s formulated from the highest ever concentration of pure Carnauba waxes. And no abrasives means all Collinite waxes are clear coat safe.

COL915 MARQUE D’ELEGANCE WAX 12OZ $26.20

Liquid Metal WaxCleans and protects chrome, aluminum, copper, brass and stainless steel in one easy step. Contains neither strong acid, nor harsh alkali. Will safely remove rust and salt deposits while protecting fittings and accessories.

COL850 LIQUID METAL WAX 1 PINT $10.40

Liquid Insulator WaxThis heavy duty liquid wax was originally developed for use by electric power companies for protection against high voltage power failure, fires and explosions. Its primary use is on the finishes of automobiles, trucks, buses and airplanes where durability, high gloss and lasting protection are paramount. Very easy to use -- requires minimum of rubbing or buffing. Clear coat safe.

COL845 LIQUID INSULATOR WAX 1 PINT $14.85

Super Doublecoat Auto WaxOne of the finest paste type auto waxes available. Easy to apply and absolutely DETERGENT PROOF. Collinite Super Doublecoat is guaranteed to outlast and outshine any other competitive auto wax, polish or protective coating under any conceivable condition. That’s why it’s called the PERMANENT AUTO WAX. No hard rubbing or buffing...and no special applicator is required. Collinite Super Doublecoat will last a full year, even under adverse conditions. Clear coat safe.

COL476S9 SUPER DOUBLECOAT AUTO WAX 9 OZ $15.10

COL476S18 SUPER DOUBLECOAT AUTO WAX 18 OZ $25.20

Liquid Sapphire Auto WaxThis heavy duty, DETERGENT PROOF formulation cleans, waxes and protects the finish in one easy application. Re-moves all foreign elements from paint while leaving a brilliant protective coating that assures protection from salt, rain, bugs, tree sap, etc. An occasional hand or mechanical washing will maintain its gleaming luster.

COLSS126 LIQUID SAPPHIRE AUTO WAX 1 PINT $14.20

COLSS126G LIQUID SAPPHIRE AUTO WAX 1/2 GAL $74.45

Paste Sapphire Auto WaxSame durable formation as above, but in a paste form. Fast, easy-to-use and detergent proof. Will clean, wax and glaze automotive finishes in a single easy operation. Removes road film, bug stains and oxidation easily and leaves a hard, gem-like finish. Eliminates hard rubbing, buffing and frequent rewaxing.

COL73SS PASTE SAPPHIRE AUTO WAX 10 OZ $14.20

Collinite Automotive Products

Color Up Prewax CleanerEasily removes dirt, film, discoloration, oil, grease, tar, wax and bug stains from highly finished surfaces. Recom-mended for cleaning automobile paint, chrome and aluminum accessories. Also great for enameled, lacquered and varnished furniture as well as chrome fixtures and appliances. Not recommended for clear coats.

COL840 COLOR UP PREWAX CLEANER 1 PINT $7.60

Leather And Vinyl TreatmentCleans, beautifies and protects leather and vinyl automotive, marine, aircraft and household upholstery in a single, easy operation. Leaves a high gloss, protective coating against wear, deterioration, spills and oxidation. Can be easily cleaned with a damp cloth.

COL855 LEATHER & VINYL TREATMENT 1 PINT $12.50

Fiberglass Boat WaxGoes on easy and stays on all season for a wipe and shine deck, glistening topsides, and a super slippery bottom. Contains a special pure Carnauba wax formula proven in harsh industrial environments. It will easily shrug off scrubbing, scuffing, detergents, salt water and marine organisms...all year long.

COL925 FIBERGLASS BOAT WAX 1 PINT $14.85

Heavy Duty Liquid FleetwaxCleans, protects and beautifies marine finishes in one easy operation. No hard rubbing or buffing. Contains rare, pure Carnauba waxes combined with advanced polymer technology. Leaves double coating of protection that lasts & lasts. Out performs products costing many times more.

COL870P HEAVY DUTY LIQUID FLEETWAX 1 PINT $16.25

COL870G HEAVY DUTY LIQUID FLEETWAX 1/2 GAL $48.66

Heavy Duty Paste FleetwaxRATED #1 WAX BY PRACTICAL SAILORPOWERBOAT REPORT - Editor’s Choice. For Marine & Aeronautical Finishes. Developed especially to seal and shield against acid rain, sun, salt spray, bugs and other environmental acids. Easily applied and non-abrasive, wax will prevent finish deterioration and the adhesion of foreign elements.

COL885 HEAVY DUTY PASTE FLEETWAX 12 OZ $16.80

Jet Craft WaxThis special, heavy duty, detergent proof formulation provides a very high gloss, almost indestructible protective coating for personal watercraft and jet boats. It insulates the surface against the adhesion of foreign elements and assures full protection against deterioration, sun, rain, salt spray and exhaust stains. Increases speed and reduces fuel costs.

COL930 JET CRAFT WAX 12 OZ $9.95

COL146 MARINE WAX 12 OZ $14.20

Collinite Marine Products

Liquid Fiberglass Boat CleanerEasily removes dirt, film, oxidation, oil, grease, rust and exhaust stains from fiberglass finishes. Restores the origi-nal color quickly without hard rubbing or buffing. Leaves a chemically clean surface to which Collinite waxes can bond perfectly. Increases long-lasting brilliance and performance of protective wax coating.

COL920P LIQUID FIBERGLASS BOAT CLEANER 1 PINT $7.60

COL920G LIQUID FIBERGLASS BOAT CLEANER 1/2 GAL $26.90

Air Agitation SuppliesAir agitation is recommended in some plating operations to eliminate the formation of air bubbles on the part, which could lead to pitting.

BOYU S-1000 AIR PUMP Low vibrationOperates quietlyMicro Computer controlVariable controlled outputMax output 8l/min

AIRPUMP BOYU S-1000 PUMP $14.00

AH6 AIR HOSE 6 FEET $0.75

GV GANG VALVE $0.75

PUMP15 AIRPUMP, HOSE & GANG VALVE $15.00

FLITZ™ METAL POLISH, FIBERGLASS & PAINT RESTORER is a concentrated cream that is unequaled in its ability to clean, polish, deoxidize and protect. It provides tough, durable protection for up to 6 months. Exceptional on wheels, Bumpers, Exhaust Stacks, Running Boards, Painted and Fiberglass Surfaces, Valve Covers, Motorcycle Casings and Headers. It is safe on clear coats, powder coats and gel coats.

FLTZMP65 FLITZ METAL POLISH PASTE 1.76OZ $7.50

FLTZMP15 FLITZ METAL POLISH PASTE 5.29OZ $16.00

FLTZMP42 FLITZ METAL POLISH PASTE 2LB $42.00

FLITZ LIQUID METAL POLISH Contains no ammonia or abrasives. Safely cleans, polishes and protects: Brass, copper, silver plate, sterling, chrome, stainless steel, nickel, bronze, gold, aluminum, pewter, fac-tory gun bluing, painted surfaces. Removes: Tarnish, rust, water stains, oxidation, fingerprints, graffiti.

FLTZLQ11 FLITZ LIQUID METAL POLISH 8.5OZ $11.00

FLITZ NATURAL WAX PROTECTANTRecommended for paint, fiberglass and plexiglass. Contains carnauba and beeswax for UV and acid rain protection. Protects up to 6 months. Exceptional performance on: all painted surfaces, clearcoat, lacquer, polyeurethane, fiberglass, plexiglass, eisenglas, acrylics, plastics, lacquer and coated brass.

FLTZWX14 FLITZ NATURAL WAX PROTECTANT 8.5OZ $14.50

FLITZ FIBERGLASS/PAINT RESTORERSafely cleans, polishes and protects: fiberglass, plexiglass, painted surfaces, eisenglas and plastics. Removes: rust, oxidation, tarnish, road tar & graffiti. Will not harm Gelcote or Clear Coat, Anodized & Polished Aluminum, Stainless Steel, Nickel, Bronze, Brass, Copper, Chrome and more. Contains no am-monia or abrasives.

FLTZFP15 FLITZ FIBERGLASS/PAINT RESTORER 8.5OZ $14.95

FLITZ RIFLE/GUN WAXNo build up. Non-Abrasive. Will not attract Dust or wash off in rain. Protects up to 6 months. Exceptional results on: Gun bluing, polished or hand rubbed stocks, stainless and nickel firearms, safe on interior and exterior of the bore. Polishes & protects against: rust, fingerprints, water stains, powder residue, tree sap, blood, salt deposits, lime deposits, and more...

FLTZGW8 FLITZ RIFLE/GUN WAX 3.4OZ $7.95

Flitz Tumbler/Media AdditiveCuts tumbling time in half. Cleans, polishes and protects brass and nickel. Will not harm ANY metal or primer. Will not stress brass. No ammonia. No buildup. Suitable for: Corn Cob, Walnut or other media.

FLTZTA15 FLITZ TUMBLER/MEDIA ADDITIVE 8.5OZ $14.95

POT METAL REPAIR PASTESolders ZINC DIECAST - White Metal - POT METAL & ALUMINUM! Simply bead blast the casting, and/or drill out the pits with a Dremel tool or die grinder. Inject enough SOLDER-IT into the hole to just overfill it. Then, using the tip of a small torch flame, gently heat the area until the paste flows. The special fluxes and cleaning agents incorporated into the paste will fuse the molten solder to the casting to provide the perfect repair. SOLDER-IT is a perfect color match for Pot Metal, and any join lines should readily buff out. Sand flat and, if required plate with copper plate.

The finished repair has a tensile strength of up to 22,000psi, so can be used to join and repair broken sections of the casting. The Zinc Metal Solder Paste. Solders ZINC DIECAST - White Metal - POT METAL & Aluminum ! No Mess, No Waste syringe applicator. Works with the heat of a torch or soldering iron. Low melting point - 400°F. (Melts before the pot metal does!)

SLDR5 SOLDER IT POT METAL 0.25 OZ $6.00

Solder-It Products

PLASTIC WELDSingle component heat activated epoxyRemarkable breakthrough product!Permanently repairs most plastics.Brief heating from a heat gun or torch at a low temperature (195 deg F) will activate paste. Results are achieved in 5 minutes - complete curing occurs in 12 hours. Finished repair can be drilled, sanded, tapped and painted.For:- ABS Radiator tanks, Overflow reservoir tanks, ABS fan shrouds, Washer reservoir tanks, Bumper covers, Grilles, Fender SkirtsNO measuringNO mixingNO waste syringe

PWRP7 PLASTIC WELD 0.28 OZ $8.00

ALUMINUM SOLDER PASTE

Low Melting Point-flows smoothly at 395°FWill Solder aluminum to aluminum or aluminum to other metalsFinished joint is stronger than base metal used - tensile strength up to 28,000 PSIExcellent for joining dissimilar gauges of metal (thick to thin) Color match is ideal on Aluminum0.25oz in convenient syringe applicator

ARP7 ALUMINUM SOLDER PASTE 0.25 OZ $7.00

AUTOMOTIVE SOLDER PASTEFeatures:-Five times stronger than ordinary solder, tensile strength: 10,000 to 25,000 PSIFlows freely and smoothly at 430°F Provides strength without the distortion of high temperature brazingSolders most metalsBetter electrical conductivity, stress and vibration resistant.0.25 oz in convenient syringe applicator

ASP7 AUTOMOTIVE SOLDER PASTE 0.25 OZ $7.00

Phenol Novolac Epoxy Gas Tank SealerPhenol Novolac Epoxies are a new breed of chemical resistant materials, able to withstand permanent immersion of many harsh solvents, fuels and oils. This Epoxy has much better bond strength than single component products, with strengths of up to 3000 PSI, and this higher strength reduces the need for a clinically clean surface, as the epoxy actually prefers to bond to a rough rusty surface. Our new phenol novolac is more thixotropic, which means it ‘hangs’ on the tank walls during the coating process. This gives a thicker overall coating. There is more volume of material in the kit to allow for this.

To prepare the tank, simply place several nuts & bolts, or a piece of old bike chain inside and about a pint of lacquer thinner, MEK or toluene. Shake the tank around to dislodge any loose particles, then drain off the liquid and allow to dry. This proce-dure removes any oils left over from the fuel.

Block off any weeping seams or holes by placing duct tape over them, and fill any ports with putty, then mix up the Epoxy Gas Tank Sealer and pour into the tank. Slowly rotate the tank in every direction for several minutes, then pour out any excess resin. Allow to harden for 36 hours before putting into use.

If doing two small tanks, ACCURATELY measure out half of each container and mix together.

Epoxy Gas Tank Sealer (1 pint) coats up to 2 x 5 gal tanks

GTS1750 EPOXY GAS TANK SEALER 1 PINT $27.50

GTS1G EPOXY GAS TANK SEALER 1 GAL $153.15

Smoke Relief & Ammonia Be GoneSmoke Relief™ is a break-through in technology which actually neutralizes smoke and related odors. Spray sparingly into the air or directly onto clothing, furniture, drapes, carpets or your car interior. Environmentally friendly, this product will neutralize smoke and related odors caused by cigars, cigarettes, cooking and wood fires. Even creosote odor is neutralized by Smoke Relief™.

Since Smoke Relief™ attacks the odor molecules, it is also very effective in neutralizing pet and body odors, chemical odors including paint and acids, skunk spray, shoe odor and a wide variety of other distasteful smells. A little goes a long way.

Smoke Relief is regularly used and highly recommended by:

* Ramada Inns * Novotel Hotels * Tilden Car Rentals * Fire Restoration Experts * Restaurants/Bars * Carpet Cleaners * Air Lines

• easy to use • economical

SR8 SMOKE RELIEF AEROSOL 8OZ $6.99

SR4 SMOKE RELIEF PUMP 4OZ $5.99

ABG AMMONIA BE GONE 12OZ $8.99

Ammonia Be Gone eliminates offensive ammonia odors such as pet urine, skunk and washroom odors. Ammonia Be Gone™ uses a proven formula that is easily sprayed onto any surface where ammonia odors are a problem.• 100% organic in composition • non-toxic • fast acting • long lasting

Sanding DrumsSanding drums are self expanding rubber spindles with hardened metal arbors and nuts.

Precision manufactured to close tolerance, providing smooth and even performance.

Use for: sanding, shaping, grinding, finishing, polishing

Use on: wood, metal, plastic, fiberglass, rubber, glass or stone.

Use with: portable drill or grinder, drill press, lather, flexible shaft, bench grinder.

Especially useful for surfaces that are curved or irregularly shaped.

SDK1350 SANDING DRUM KIT $16.50

Quick Lock Drums

Quick Lock Drums are simple and fast to use.

Just turn the rubber cylinder to secure or loosen the sleeve.

No tools are needed!

QL808 1/2” x 1/2” x 1/2” $3.00

QL1616 1” x 1” x 1/4” $3.25

QL2424 1.5” x 1.5” x 1/4” $4.50

QL3224 2” x 1.5” x 1/4” $5.75

D-4848-3 3” x 3” x 1/4” (needs wrench to tighten) $13.80

Sanding Sleeves (6 per pack)Long lasting spiral ‘no lap’ aluminum oxide resin bonded. Cloth back inner liner for durability and firm ‘non-slip’ grip.

8086C 1/2” x 1/2” COURSE $1.70

8086M 1/2” X 1/2” MEDIUM $1.70

8086F 1/2” X 1/2” FINE $1.70

16166C 1” X 1” COURSE $2.40

16166M 1” X 1” MEDIUM $2.40

1616F 1” X 1” FINE $2.40

24246C 1.5” X 1.5” COURSE $3.30

24246M 1.5” X 1.5” MEDIUM $3.30

24246F 1.5” X 1.5” FINE $3.30

32246C 2” X 1.5” COURSE $3.75

32246M 2” X 1.5” MEDIUM $3.75

32246F 2” X 1.5” FINE $3.75

48486C 3” X 3” COURSE $8.00

48486M 3” X 3” MEDIUM $8.00

48486F 3” X 3” FINE $8.00

Sanding Drum Kit Contains:

Diameter Width Shank

1/2” 1/2” 1/8”

3/4” 1” 1/4”

1” 1” 1/4”

1.5” 1.5” 1/4”

2” 1.5” 1/4”

Quick Lock Mini Sanding DisksAluminum Oxide Sanding Disks • These novel aluminum oxide sanding disks quickly lock onto the sanding pad

with a simple quarter turn. • Long life, rugged construction gives rapid surface preparation in smaller

areas.

GEM70015001 Rubber Sanding Pad and 1/4” Arbor 1.5” $8.50

GEM700020003 Rubber Sanding Pad and 1/4” Arbor 2” $8.50

GEM7003001 Rubber Sanding Pad and 1/4” Arbor 2” $8.50

Code Name Size Grit Price

GEM21215205 Aluminum Oxide Sanding Disk 1.5” 24 $0.48







GEM21220205 Aluminum Oxide Sanding Disk 2” 24 $0.50














Aluminum, Acrylic, Arborite, Brass, Bronze, Beryllium, Chrome, Copper, Ceramic, Eisenglas, Fiberglass, Formica, Factory Gun Bluing, Gold, Glass, Linoleum, Magnesium, Marble, Nickel, Painted Surfaces, Pewter, Plastics, Perspex, Platinum, Silver, Sterling, Stainless Steel, and Tin.

PEEK® Safely Removes Acid Rain, Corrosion, Chalking, Dyes, Finger Marks, Flies, Grease, Graffiti, Heat Discoloration, Leaf Marks, Lime Deposit, Oxidation, Oil, Permanent marker, Powder Residue, Rust, Salt Water Stains, Tar, Tarnish, Tree Sap, Water Stains, and Wax Buildup.

Tips:Apply Peek® sparingly. Do not let dry. Rub briskly on surface to be cleaned, using a dry or damp cloth.On large surface areas, Peek® may also be applied using a low-speed buffer (under 1000RPM).On intricate surfaces, Peek® may be applied using an old toothbrush surrounded by your polishing cloth. On minor rust or stubborn deposits, Peek® may be applied with a nylon scouring pad or #0000

brnze/stl wool. Non-Abrasive · Acid-Free · Anti-Oxidant · Safe on Skin100% North American · Exceptional Quality

PEEKT50 PEEK PASTE TUBE 50 GM $4.98

PEEKT100 PEEK PASTE TUBE 100 GM $6.98

PEEKCN1000 PEEK PASTE CAN 1000 GM $23.96

PEEKM150 PEEK MOUSSE 150 GM $5.98

PEEKM500 PEEK MOUSSE 500 GM $11.98

Quick Lock Surface Prep DisksSurface Preparation Quick Change Abrasive Disks • Ideal for paint and light rust removal • Uses the same sanding pad and arbor as the Aluminum Oxide Sanding Disks

Code Name Size Grade Price

GEM25115803 Surface Prep Disk 1.5” Extra Course $0.58

GEM25115853 Surface Prep Disk 1.5” Course $0.58

GEM25115903 Surface Prep Disk 1.5” Medium $0.58

GEM25115923 Surface Prep Disk 1.5” Fine $0.58

GEM25115953 Surface Prep Disk 1.5” Very Fine $0.58

GEM25120803 Surface Prep Disk 2” Extra Course $0.84

GEM25120853 Surface Prep Disk 2” Course $0.84

GEM25120903 Surface Prep Disk 2” Medium $0.84

GEM25120923 Surface Prep Disk 2” Fine $0.84

GEM25120953 Surface Prep Disk 2” Very Fine $0.84

GEM25130803 Surface Prep Disk 3” Extra Course $1.40

GEM25130853 Surface Prep Disk 3” Course $1.40

GEM25130903 Surface Prep Disk 3” Medium $1.40

GEM25130923 Surface Prep Disk 3” Fine $1.40

GEM25130953 Surface Prep Disk 3” Very Fine $1.40

Rotary Tool Kit Kit Contains: • Sanding Drums • Sanding Disks • Flap Wheels • Polishing Wheels • Cutting Tools • Wire Wheels • Convenient Carrying Case

DGK1 ROTARY TOOL KIT $24.95

Mini Rotary Tool Kit Kit Contains 105 Pieces Including: • 36 x 15/16” Cut Off Wheels • 36 x Medium 3/4” Sanding Disks • 1/2” Drum Sander • 5 x Fine 1/2” Sanding Bands • 4 x Course 1/2” Sanding Bands • 2 x High Speed 1/8” Cutters • 3 x Reinforced 1-1/4” Cut Off

Wheels • 1 x Felt 1” Polishing Wheel

DPK1 MINI ROTARY TOOL KIT $9.95

• 6 x Felt 1/2” Polishing Wheels • 1 x Felt 3/8” Polishing Tip • 3/4” Wire Wheel • 1/2” Bristle Cup • 3/8” x 1” Dressing Stone • Aluminum Oxide 3/8” Grinding Stone • Aluminum Oxide 5/8” Grinding Stone • Silicon Carbide 13/32” Grinding Stone • Silicon Carbide 25/32” Grinding Stone • Polishing Stone • 1/8” Set Screw Mandrel • 1/8” Screw Mandrel

Scotchbrite Hand Pads • All purpose general cleaning material

Code Name Color Grade Price

GEM58047 Scotchbrite Pads 6” x 9” Maroon Very Fine $0.68

GEM58048 Scotchbrite Pads 6” x 9” Grey Ultra Fine $0.68

GEM58049 Scotchbrite Pads 6” x 9” Green Medium $0.68

GEM58080 Scotchbrite Pads 6” x 9” White Non Abrasive $0.68

GEM23811 Scotchbrite Pads 6” x 9” Tan Heavy Duty $1.44

Saw Blade Wax StickF-168 is specifically formulated for applying to metal cutting saws. The tenacious, clinging grease film left on the cutting tool serves as a heat reducing coolant on the cutting teeth and work surface. The anti-heating properties in the formulation work by keeping the wax on the saw blade or tool, reducing the tendency to spin off the saw blade. The result is a smooth and quick cut, adding longer life to the cutting teeth.

F-168 prevents burning, clogging, chatter and tearing. It works well on all cutting operations of non-ferrous or ferrous metals. F-168 is soluble in water, non-toxic, non-irritating and biodegradable. Cleans easily by wiping or hot water flushing. F-168 ‘s fiber tube is made with an extended hollow end “Safety-Grip” hand applicator allowing the operator to hold and push

the F-168 wax stick safely against the saw or cutting tool. Uses: Band saws, Circular saws, Carpenter saws, Hack saws. Other uses: Drilling, Tapping,

Grinding, Filing, Cutting, Metal Spinning, Polishing with Coated Abrasives. Packaged in a spiral wound Peel-a-Way paper tube 2” x 12” long tube with Safety Grip Handle!

F515-6056 SAW BLADE WAX STICK F-168 $17.99

F515-6056C 6 x SAW BLADE WAX STICK F-168 $89.95

Liquid PolishesBlue Begone™Blue Begone™ is specially formulated combining fine alumina powder, blended with green chromium oxide for producing a bright lustrous shine on stainless steel, aluminum, chrome, brass and more. It removes ‘bluing’ in seconds, whilst bringing chrome to a mirror shine. You can use BLUE BEGONE™ on ALL your chrome work.

Shine & Polish Aluminum, Chrome, Stainless To A Mirror FinishFast & Easy, Removes Oxidation, Restores A Bright, Shiny Luster, Contains No Petroleum Distillates, Non-Toxic & Bio Degradable

White Liquid Rouge Metal PolishWhite Liquid Rouge is formulated for use on all aluminum to “cut down” and “color” in one operation. Brings up a high luster, leaving the surface clean and free of excess grease and dirt, while removing mild oxidation, water spots and grime.

Shine & Polish Aluminum To A Mirror Finish, Fast & Easy, Removes Oxidation, Restores A Bright, Shiny Luster, Contains No Petroleum Distillates, Non-Toxic & Bio Degradable

BLUBG BLUE BEGONE™ 8 OZ $9.95

WLR12 WHITE LIQUID ROUGE 8 OZ $9.95

Airbrush SetPerfect for application of Silvaspray conductive coating.

ABR AIRBRUSH SET $24.50

Epoxy Putty Sticks

QUIKWOOD PUTTYRepair, Rebuild, Restore Anything Made of Wood QUIKWOOD® is a remarkable polymer compound for instant wood repair. Easy-to-use QUIKWOOD® molds like clay, then dries like wood in 30 minutes. QUIKWOOD® is also great for wood-to-wood and wood-to-metal bonding.

QUIKW5 QUIKWOOD® EPOXY 2OZ $5.00

QUIKWP3 QUIKWOOD® EPOXY PINE 1OZ $3.00

QUIKWM3 QUIKWOOD® EPOXY MAHOGHANY 1OZ $3.00

FASTSTEEL EPOXY FASTSTEEL® is a hard kneadable, steel-reinforced, epoxy putty adhesive sealant that mixes in just one minute to provide fast repairs to items made of ferrous and aluminum metals.

It comes in a handy four-ounce “tootsie-roll” form with the curing agent encapsulated in the consis-tency eliminates drips and runs, providing “no mess” applications with no tools required for use.

FASTST5 FASTSTEEL® EPOXY 5OZ $5.00AQUAMEND EPOXY NO BOAT SHOULD BE WITHOUT IT!

After proper mixing, AQUAMEND® molds like clay and may be used to patch dings, scratches, cuts, gouges, and holes in fi berglass, metal, and wooden boat decks and hulls; to repair fi ttings, pipes, electrical connections, leaking gaskets, water tanks, fi sh boxes, tubs, battery cases, sinks, spas, hot tubs, tanks, pools; to form custom gaskets, etc.

AQUA5 AQUAMEND® EPOXY 5OZ $5.00INSTACRETE EPOXY

Ideal for Anchoring, Patching and Sealing Concrete, Mortar and MasonryINSTACRETE® is an amazing polymer compound for instant concrete repair. Easy-to-use INSTA-CRETE® shapes like modeling clay, then sets “rock hard” in 60 minutes.

INSTACRETE® cures to a cement-like color and texture “to look and feel like real concrete”.

INSTC5 INSTACRETE® EPOXY 5OZ $5.00

QUIKPLASTIC EPOXYQUIKPLASTIK® is a hand kneadable, fast setting epoxy putty that bonds to all major plastic types except polyolefi ns. When mixed, QUIKPLASTIC® is the consistency of modeling clay and can be molded into shapes, wrapped around or used to build up and repair just about anything made from many rigid or semifl exible plastics. After mixing, the color of the putty fades to white.

QUIKP5 QUIKPLASTIK® EPOXY 5OZ $5.00

QUIKCOPPER EPOXYQUIKCOPPER® is a hand kneadable, copper reinforced, epoxy putty that mixes in just one minute to provide fast repairs to pipes, tanks, and vessels made of copper, brass, bronze, and other non-ferrous metals. It comes in a handy four-ounce “tootsie-roll” form with the curing agent encapsulated in the contrasting color base material.

QUIKC5 QUIKCOPPER® EPOXY 5OZ $5.00

QUIKALUMINUM EPOXY QUIKALUMINUM® is a hand kneadable, non-rusting, aluminum reinforced, epoxy putty that mixes in just one minute to repair aluminum easily and effi ciently. It comes in a handy four-ounce “tootsie roll” form with the curing agent encapsulated in the contrasting color base material. The putty-like consistency eliminates drips and runs, providing “no mess” applica-tions with no tools required for use.

QUIKA5 QUIKALUMINUM® EPOXY 4CUIN $5.00

REPARIITQUIK ALL PURPOSE PUTTYRepair loose or cracked wall, fl oor tilesElectrical use in place of tape or plastic connectorFabricate small parts, mend holesAttach fi xtures, machines, tags and signsUse for 1001 Household and Industrial purposes

REPQ5 REPAIRITQUIK PUTTY 4OZ $5.00

Lab-MetalReady-to-use aluminum-filled repair and patching compound.

Spreads like paste, hardens into metal. Adheres to metal, wood, plastic, glass, fiberglass and more.

Apply right from the can. No mixing of two parts, no measuring or heat required. Lab-metal can be milled, drilled, tapped, ground and sanded smooth.

Will not shrink or crack. Water resistant, rustproof. Withstands heat to 350°F (higher for one-time powder coating exposures). Thin with Lab-solvent for brush-ing or spraying. Many applications may be made from a single can -- simply add Lab-solvent before covering. Spreading or shaping Lab-metal (auto body work, sculpturing) is enhanced by keeping applicator moist with Lab-solvent while spreading. Durable, permanent filler for patching seams and cracks; rebuilding worn metal surfaces; repairing dented metal; finishing welds; filling holes and imperfections in metal castings. May be powder coated for single exposures up to 420°F, no longer than 20 minutes. Packaged in 12 oz., 24 oz.

AP10101 LAB-METAL 12 OZ & 1 PINT SOLVENT $29.99

AP10102 LAB-METAL 24 OZ & 1 PINT SOLVENT $39.99

Repair compound for high heat applications.

One-part metal putty able to withstand temperatures to 1000°F. Apply directly from the can with a putty knife. Can be machined, ground, filed, and sanded. Repairs items prior to lengthy or repeated powder coating processes.

Ideal for repairs in powder coating, metalworking, welding, fabricating, heating, construc-tion, die casting, and mold refinishing which may be subjected to high temperatures. Used to repair fabricated parts, core boxes, boilers, mufflers, exhaust systems, molds, wood and coal burning stoves, grills, engines, radiators, and industrial ovens.

Packaged in 24 oz. containers.

AP11102 HI-TEMP LAB-METAL 24 OZ & 1 PINT SOLVENT $59.99

Thinner for Lab-metal, metal cleaner.

A blend of solvents for thinning Lab-metal to paint consistency for brushing or spraying.

Surfaces cleaned with Lab-solvent provide superior adhesion for Lab-metal and Hi-Temp Lab-metal. Cuts and flushes oil, grease, and dirt off of precision tools, bearings, gears, motors, condensers, controls, and other valuable equipment. Leaves no film and does not corrode.

Packaged in pint containers.

All Lab-Metal and Hi Temp Lab-Metal products are sold with a pint of Lab-Solvent. This sol-vent is used to:Clean the metal prior to application.Thin the productKeep the product from drying out after opening. Pour a small amount of Lab-Solvent in the can after use.

AP20102 LAB SOLVENT - 1 PINT $13.20

Rust Bullet™ Rust Preventative PaintUnlike POR-15®, Rust-Oleum® and Wasser® Brand Systems, Rust Bul-let® is a single step process (2 coats) used to Stop Rust. Rust has histori-cally been known as “the cancer of iron and steel” and yet, only short-term fixes for rust protection have been available. To amplify the problem, the application of these “short term” tempo-rary products requires removing existing rust, and/or extensive, time consuming, and often complicated preparation metal prep., such as the POR15®’s 4-Step Process of the surface before applying the “temporary fix”.POR-15®’s own directions state the following:“WHAT IS THE ‘PROPER PREPARATION’?We (POR-15®) make a product called ‘METAL-READY®’. It’s a rust re-mover that leaves a zinc phosphate coating on base metal, the perfect preprimer for POR-15®. NOTE: New steel is coated with a protective oil finish at the mill. This finish must be removed before using POR-15® or

Metal-Ready. Clean metal first with POR-15® Marine-Clean, then rinse with water and dry.

By their own instructions, the required steps for POR-15®’s application is to clean the affected area first with Marine-Clean, then once the area is clean, treat with Metal-Ready as a surface prep to give POR-15® the type of surface that is required for a good bond to the metal. Once these two steps have been done, you can then apply the POR-15® coating as needed. Please be aware POR-15® is not designed as a topcoat and is sensitive to UV-light and does require a topcoat afterwards if subjected to sunlight. This in itself, is the forth step of the process. These four steps make POR-15® one of the highest cost rust treatments as seen on our Product Com-parison page.

It has long been a truism, that when you paint over rust, it is worse than leaving the rusty surface uncoated. This is because most paints, or coatings, used to stop rust form a film over the rust, forming a barrier. This barrier traps moisture, the enemy of iron and steel, against the metal surface allowing continued destruction of the metal underneath.

Rust Bullet® is not a paint in the ordinary sense of the word. Rust Bullet® requires no prepa-

ration like POR-15® to kill rust except the removal of large flakes of loose rust by light scraping or brushing. When applied, Rust Bullet® does not form a film immediately, but rather it penetrates the porous rust reaching the metal underneath. Our exclusive method of protection* dehydrates, or dries out the rust by a chemical activity, allowing the resin to solidify into a tough coating with phenomenal adhesion. The rust becomes intertwined in the resin matrix and remains a permanent part of the coating. The second coat of Rust Bullet® fills any pinholes in the first coat and forms a nearly impenetrable coating that protects the metal. The exclusive method for excellent UV resistance** adds to the protection, unlike POR-15® which requires a topcoat for UV pro-tection, Rust Bullet® requires no topcoat, and any conventional paint can be applied over the second coat for decorative purposes if desired, but is NOT required. Rust Bullet® has by far the best abrasion resistance of any of the tested products, and is therefore quite difficult to scratch. If a scratch or chip in the coating does occur, it will rust in the breached area because it cannot protect what it does not coat, but rust will not proceed beyond the breach. Rust Bullet® will not lift, blister, or peel away from its leading edge in any significant degree. Simply reapplying Rust Bullet® over the scratch or chip reseals the coating, providing easy, low cost maintenance.

RBP RUST BULLET 1 PINT $21.99

RBQ RUST BULLET 1 QUART $32.99

RBG RUST BULLET 1 GALLON $104.99

RBAP RUST BULLET AUTOMOTIVE BLEND 1 PINT $21.99

RBAQ RUST BULLET AUTOMOTIVE BLEND 1 QUART $32.99

RBAG RUST BULLET AUTOMOTIVE BLEND 1 GALLON $104.99

RBDS RUST BULLET DOUBLE SHOT 8 OZ $15.99

RBSS RUST BULLET SIX SHOOTER 24 OZ $38.99

All Rust Bullet

Products Are ORM-D

The Rust Bullet® Double Shot Starter Kit is conveniently packaged for you to sample Rust Bullet’s® New Technology with NO WASTE! These two-four ounce cans contain enough Rust Bullet® to cover approximately six square feet per individual can (12 square feet per kit), using a two coat application. For your convenience, we have included two pairs of Industrial Grade Nitrile Gloves and two 1” Paint Brushes, everything you need for a small project or touch-up.

The Rust Bullet® Six Shooter, with its innovative new packaging, offers you the ultimate convenience with NO WASTE! The Rust Bullet® Six Shooter contains six-four ounce cans of Rust Bullet®, enough to cover approximately six square feet per individual can (36 square feet per package), using a two coat application. The Six Shooter is handy for those smaller projects and touch-ups and allows you to open small amounts of Rust Bullet® as it is needed, providing you the ultimate convenience with NONE of the WASTE!

Alumilite Molding ProductsComplete Super Casting Kit & Mini Super Casting Kit

Super Kit Includes:AB28 Kit 28oz Super Plastic Alumilite Regular1 lb. QuickSet RTV Silicone Rubber1 lb. Alumilite Synthetic Modeling Clay2 oz. Rubber to Rubber Mold Release1 oz. Measuring CupsStir SticksHow-To Booklet

The Super Casting Kit contains everything you need to make a mold and cast your part in 1 day! All measuring tools are included for the Alumilite and the QuickSet Rubber. All products are non-toxic and can easily be used in your home. The Mini Super Casting Kit contains all of the same materials as the Super Kit includes but in smaller quantities. (note: the Mini Super Casting Kit does

not contain Mold Release Powder)Casting ResinAlumilite’s polyurethane casting resins allow you to cast exact replicas of an original very quickly. The castings can be dyed, painted, stained, tapped and/or machined. 3 Easy Steps To UsingMeasure equal parts of A & BCombine and mixPour - Liquid to Solid in 3 minutes28 oz Kit - $30.25

ALUM10500 ALUMILITE SUPER CASTING KIT $70.00

ALUM10560 ALUMILITE MINI SUPER CASTING KIT $30.00

ALUM10010 ALUMILITE SUPER PLASTIC RESIN 28 OZ $30.25

ALUM20001 ALUMILITE QUIKSET RUBBER 1 LB $27.50

ALUM20400 ALUMILITE HIGH STRENGTH 2 SILICONE RUBBER 1 LB $27.50

ALUM20500 ALUMILITE HIGH STRENGTH 3 SILICONE RUBBER 1 LB $27.50

ALUM40000 ALUMILITE MODELLING CLAY 1 LB $2.75

ALUM42402 ALUMILITE RUBBER TO RUBBER MOLD RELEASE 2 OZ $4.00

ALUM20020 ALUMILITE 5 MINUTE MIKD PUTTY 1 LB $30.00

ALUM42610 ALUMILITE 25 X 1oz MEASURING CUPS $4.95

ALUM42620 ALUMILITE 6 X 6oz MEASURING CUPS $4.95

ALUM42710 50 X STIR STICKS $2.95

RTV Silicone Mold-making Rubber1 lb Kit Base & CatalystEasy Instructions IncludedMixing Ratio 10:1/Base:CatalystWorking Time: 30 minsCure Time: 4 hoursOptimum cure is reached in 24 hours. When Alumilite “Quick-Set” RTV Silicone Rubber is fully cured it remains flexible from -70°F to 400°F, with intermittent exposure to 500°F. Available in Quick Set and High Strength Formulations

Synthetic Modelling Clay

The synthetic clay is used for creating one time original patterns, sealing mold boxes and for claying up two part molds. Alumilite’s clay will never dry out and can be reused over and over again.

5 Minute Mold PuttyAlumilite’s 5 Minute Mold Putty allows you to make quick impressions without a mold box, in just 5 minutes. It is safe to use and complies with FDA standards for food contact.

Rubber To Rubber Mold ReleaseUse Alumilite’s Rubber To Rubber Mold Release in between pours of silicone rubber to prevent the rubber from adhering to itself.Simply shake the bottle before using and paint the mold release on the cured rubber before pouring the second half of the mold.

Techo-WeldTECHNO-WELD is a revolutionary material in the field of Aluminum Joining, and overcomes some of the major problems associated with traditional methods.

SIMPLE TO USE - Joining with TECHNO-WELD is a similar process to gas soldering/silver soldering, therefore traditional Aluminum welding skills are not necessary. Like soldering, it is a two stage process, where the first stage is to heat the work piece to 380C and ‘tin’ the surfaces to be joined with the TECHNO-WELD rod - the TECHNO-WELD alloy diffuses into the surface, changing the composition and reducing the melting point of the parent alloy.

The second stage is to reheat the mated surfaces to 380°C, allowing the surface layers to fuse together. Any general heat source appropriate to the job can be used, such as an Air-Acetylene or Air-Propane Blowtorch. No need to raise the temperature of the job dangerously near the melting

point of the Alloy itself, avoiding the possibility of sudden collapse of the job.

NO FLUX/FLUX FUMES - The process requires no Flux at all, and is therefore free from toxic flux fumes There is no need for special cleaning processes after the work has been done. Any joints that have been prepared with TECHNO-WELD can be ground back and painted or plated without the possibility of the coating ‘spoiling’ due to flux migration.

A STRONG FUSION WELD - TECHNO-WELD forms a true Fusion Weld. Although the welder is not heating the work piece up to it’s melting point, the area of work piece under the correctly applied TECHNO-WELD will melt and form an alloy with the TECHNO-WELD material without high local temperatures The resultant material is very hard (like a soft version of mild steel), has good tensile and compressive strengths which serves to reinforce the join or filled area.

VERSATILE - TECHNO-WELD is effective on virtually all grades of Aluminum Alloys, including special derivatives such as MMC’s, Birmabrite (Land Rover bodies), as well as Zinc and low Magnesium content Alloys. The TECHNO-WELD material has a high surface tension in it’s molten state, and can therefore be used to bridge gaps and holes up to 10mm in die, and can be used to ‘build up” areas of missing metal.

TECH6RK TECHNO-WELD 6 ROD KIT 3/32 DIA $16.75

Here’s a great new way to carry out repairs to pits in your castings.

Plum-Loy is made from a fine dust of solder, mixed with tinning flux and cleaning agents. It can be painted onto a surface with a small brush.

As soon as the tip of a torch flame touches the thin layer of Plum-Loy, it melts, ‘tinning’ the surface. This uses much less heat than required to melt a stick or wire solder, making it ideal to repair onto thin plated surfaces.

Dents in the surface? Simply apply Plum-Loy to the area, melt it, then apply regular stick solder to ‘puddle in’ the area, just like the old fashioned way of lead filling.

Plum-Loy Solder Paste

Deep pits? Paint over a layer of Plum-Loy, heat to melt, then apply more to fill the hole.

Plum-Loy is ideal for painting over those areas with small pits or scratches. It will bond to steel, copper, brass, bronze, and nickel. It can ONLY be plated with copper plate. Ideally, you should try to sandwich the Plum-Loy between two layers of copper plate.

To finish:- Sand or file down the area, then apply a copper plate to cover. Buff the plate and finish with nickel and or chrome.

FLUX17 PLUM-LOY 1 LB $22.00

The Foundry In MiniatureThis unique kit has been developed to produce high quality reproduction parts which can easily be plated with any of our plating kits.

The sand casting technique is thousands of years old, and is extremely simple to do, providing you have the right equipment - and know how! We have pro-vided all the main ingredients in this kit to get you started within a matter of hours. From the time of firing up your furnace, you could be plating ‘new-old parts’ within one hour!

Included in each kit is the famous book ‘How to Cast Small Metal Parts’, by Bill Cannon. He carefully explains how to make a furnace, in less than one hour, using a metal container, (which is included in the kit) and an old hair drier, or blower. The furnace can be run on propane gas from a barbecue, or charcoal. You will need to obtain 7 fire bricks and a bag of refractory cement from a local fireplace store.

The metal supplied is high quality, low temperature melting (650 deg F), and non corroding. It will accept any of our plating systems. High quality detail will

be reproduced using this metal. Replacement ingots can be purchased separately.

A special, high quality mold sand is supplied. The fine mesh size of the sand allows for sharp definition of detail to be obtained from the original. This material is blended with special oils which make it bond together when compressed. A complete novice can set up the entire operation, and produce professional parts on his first attempt!

The Kit Contains:1 x 16lb reusable Mold Sand1 Furnace Container and Lid1 Ladle 1 Instruction Book “How to Cast Small Metal Parts”1 lb. Parting Powder1 Parting Powder Bag.CASWELL metal, makes approx. 30 cubic inches

FND194 FOUNDRY IN MINIATURE $130.00

HTC1495 HOW TO CAST SMALL METAL PARTS BOOK $14.95

CM69 CASTING METAL 30 CU IN $29.00

CS55 MOLDING SAND 16 LB $55.00

PART10 PARTING POWDER & BAG $10.00

Pyro PuttyHI-TEMP RESTORATION PRODUCT

THE ULTIMATE IN RESTORATION SOLUTIONS USING TODAY’S TECHNOLOGY

This high temperature ceramic and metal-filled paste is ideal for repairing de-fects in manifolds, headers, exhaust pipes, mufflers, and more.

Pyro-Putty 2400 bonds tenaciously to cast aluminum, cast iron and steel, and are easy to apply, cure, machine and clean.

PYRO25 PYRO-PUTTY $29.95

Flexible Shaft GrinderWith a choice of chucks, the smaller felt bobs with 1/8” shafts can be used for intricate work such as jewelry, and the 1/4” chuck allows the use of the larger bobs and buffing wheels, making it ideal for treating larger items such as aluminum wheels.

The chuck has a protective cowl, preventing the chuck gearing from damaging any work piece.

The foot pedal gives complete control of starting, stopping and speed.

Shaft = 38”2 Chucks = 1/8” & 1/4”Voltage 110 60HzRPM 15000Amps (no load) 0.5amps

FSG65 FLEXIBLE SHAFT GRINDER $85.00

Industrial Flexible ShaftsThe “Ferrari” of the Flexible Shaft. These shafts are crafted to exacting standards by a team of engineers.

Turn your bench grinder into a high powered rotary tool. These industrial strength flexible shafts will perform the toughest of jobs.

The #5 model is designed to fit our 3/4HP Buffing Machine. The #8 model is designed to fit our 2HP Buffing Machine.

Please allow 2-4 weeks for these shafts to be manufactured.

IND54 INDUSTRIAL FLEXIBLE SHAFT #5 4 FOOT $299.00






Buffing Machines

Related Products: Buffing Wheel Kits - Page 52 Buffing Compound - Pages 55 - 60

1/3HP Buffing Machine 110 volts, 4.2 amps3450 rpmsingle phase, 60hz3 year warrantylong 1/2” diameter shaft

Get the motor and a great starter buffing kit for only $99.00Kit includes :1 x 1/3 hp buffing machine, 2 x 6” sisal wheels, 2 x 6” spiral sewn cotton wheels, 2 x 6” loose cotton wheels, 1 large bar White compound, 1 large bar brown compound, 1 large bar black compound, 1 buffing wheel rake

BUFF115 1/3HP BUFFING MACHINE $85.00

BUFF115K 1/3HP BUFFING MACHINE KIT $99.00

3/4 HP + 2HP Buffing MachinesLarge diameter extended shafts for all your buffing and polishing needs. Heavy duty cast iron base and frame. Precision machined shaft and lubricated bearings for longer life. Single phase motor.

3/4HP Buffer features:3/4 HP, 115V, 60 Hz, 8 amps3450 RPMSpindle thread: 3/4’’ x 12 TPI Spindle length: 2-5/16’’ Base: 8’’L x 5-3/4’’Overall length of shaft - 30”Height of shaft center from bottom of base - 6.5”12 month warrantyAlso available in 1100 RPM Model for buffing plastics and acrylics. 4” plates to hold 12” - 16” wheels.

2HP Buffer features:220V, 60Hz, 9.8 AmpsOverall length of shaft - 30”3450 RPMHeight of shaft center from bottom of base - 6.5”8” x 6” Base12 month warranty

Save With The 3/4HP Buffing Kit:1 x 3/4hp buffer - 3450 RPM2 x 8” x 1/2” Spiral Sewn Wheels2 x 8” x 1/2” Sisal Wheels2 x 8” x 1/2” Loose Cotton Wheels2 x 8” x 1/2” Canton Flannel Wheels 2 x 4” x 1/2” Spiral Sewn Wheels2 x 4” x 1/2” Sisal Wheels2 x 4” x 1/2” Loose Cotton Wheels2 x 4” x 1/2” Canton Flannel Wheels 1 x six pack Assorted Jumbo Buffing Compounds 1 Wheel Rake

2HP Buffing Kit Contains:1 x 2 HP Buffer2 x 8” x 1/2” Spiral Sewn Wheels2 x 8” x 1/2” Sisal Wheels2 x 8” x 1/2” Loose Cotton Wheels2 x 8” x 1/2” Canton Flannel Wheels 2 x 4” x 1/2” Spiral Sewn Wheels2 x 4” x 1/2” Sisal Wheels2 x 4” x 1/2” Loose Cotton Wheels2 x 4” x 1/2” Canton Flannel Wheels 1 x six pack Assorted Jumbo Buffing Compounds 1 Wheel Rake

BUFF215 3/4HP BUFFING MACHINE - 3450 RPM $215.00

34HPBMKIT 3/4HP BUFFING MACHINE KIT $265.00

BUFF1680 3/4HP BUFFING MACHINE - 1680 RPM (MOTOR ONLY) $215.00

BUFF245 3/4HP BUFFING MACHINE - 1100 RPM (MOTOR ONLY) $245.00

BUFF295 2HP BUFFING MACHINE $295.00

2HPBMKIT 2HP BUFFING MACHINE KIT $345.00

BS9945 BUFFING STAND (FITS 3/4HP & 2HP MOTORS) $24.50

Option Arbor System

A bench top mounted electric motor with a patented quick-change arbor adapter system that enables the operator to rapidly change to different pre-assembled work arbors with no tools required. Grinding, sanding, buffing, polishing, cutting and many other operations can be accomplished with the help of a handy rotary storage rack. The system runs true and is highly repeatable.

SPECIFICATIONS • Dayton brand 3/4 horsepower variable speed buffer motor. • Variable speed 2000-3300 rpm, with a 3450 rpm setting. • The Arbor Adapter/Work Arbor interface is sealed by an “O” ring to keep out dust and grit.

Lubrication is not required. Lubrication is not recommended. • Assembly runs true as possible with a TIR (Total Indicator Run out) of only plus or minus .005”,

which is the diameter of the average human hair.

• Machined from 4140 heat-treated tool steel. • Work Arbors available: � 5/8” bore wheels and larger � 1/2” bore wheels and smaller for small shaft-mounted wheels, stones and burrs (uses a 1/2” capacity Jacob’s drill chuck) � 5/8”-11 stub for resinoid grinding discs (the type used on hand-held angle grinders)

FEATURES • One machine takes the place of a room full of other non-quick change machines because we make the only true quick-change

system • A wide variety of pre-assembled Work Arbors can be made up for your specific applications and processes (A Work Arbor Make

Up socket tool is included in the standard package) • A bench mounted Rotary Work Arbor Storage Rack is available as an accessory • A bench mounted Dust Collection System is also available as an accessory • The left arbor shaft is left original and can still be used while the right arbor shaft is shortened and we add the Arbor Adapter

(The left arbor can be completely removed if you have severe space restrictions) • A wide variety of work wheels can be mounted: � All types of flannel buffs � ScotchBrite and other similar abrasive wheels � Wire wheels � Flap wheels � Centrifugal expansion sanding cartridge drums � Standard sanding cartridges � Sanding discs (flexible and rigid) � Resinoid abrasive discs (The type used on hand-held angle grinders) � Abrasive cutoff discs � Small shaft mounted wheels, stones and burrs

5/8”- 11 NC STANDARD WORK ARBOR

Work Arbor change-outs are performed by hand with no tools required, in less than 10 seconds. SPECIFICATIONS • A full 2 3/4” of threaded mandrel for all wheels up to 1” width. A wider wheel can be accommodated by

removing the outside flange, replacing it with a washer or using a thinner retaining nut. • Precision CNC machined from hardened 4140 tool steelFEATURES • A pair of true running, fully machined flanges. • Hardened steel arbor washer • Nylon insert locknutBENEFITS • An assortment of Work Arbors can be pre-mounted with any work wheel you wish. • The OPTIONARBOR SYSTEM TM includes an Arbor Makeup Socket tool.

1/2”- 20 NF ARBOR WITH JACOBS DRILL CHUCK

The 1/2” capacity Jacob’s drill chuck fills the versatility gap for small and odd applications. SPECIFICATIONS • Precision 1/2”- 20 NF male mounting spud • Precision CNC machined from hardened 4140 tool steel • 0 - 1/2” precision Jacob’s drill chuck with chuck key and 1/2” - 20 NF female threadFEATURES • Drill chuck comes pre-mounted with Loctite thread locking compound. • This Arbor is also available separately so you can mount the chuck of your choice.BENEFITS • A wide variety of pre-mounted small wheels can be alternately mounted in the drill chuck.

WBOAS OPTION ARBOR SYSTEM $735.00

WBSWA STANDARD WORK ARBOR $89.21

WBJCA JACOBS CHUCK ARBOR $105.19

MORE ACESSORIES ON NEXT PAGE

Wet & Dry PaperSilicon Carbide Wet & Dry Paper gives you exceptionally long life with increased cutting power. Order by the individual sheet, or by the 100 sheet pack.

WD60-1 1 x 60 GRIT $0.30

WD60-100 100 X 60 GRIT $24.00

WD80-1 1 X 80 GRIT $0.30

WD80-100 100 X 80 GRIT $24.00

WD120-1 1 X 120 GRIT $0.30

WD120-100 100 X 120 GRIT $24.00

WD240-1 1 X 240 GRIT $0.30

WD240-100 100 X 240 GRIT $24.00

WD320-1 1 X 320 GRIT $0.30

WD320-100 100 X 320 GRIT $24.00

WD400-1 1 X 400 GRIT $0.30

WD400-100 100 X 400 GRIT $24.00

WD600-1 1 X 600 GRIT $0.30

WD600-100 100 X 600 GRIT $24.00

WD1000-1 1 X 1000 GRIT $0.30

WD1000-100 100 X 1000 GRIT $24.00

WD1200-1 1 X 1200 GRIT $0.30

WD1200-100 100 X 1200 GRIT $24.00

5/8”- 11 NC STUB ARBOR FOR RESINOID GRINDING DISCS

Many diameters, thickness and shapes of resinoid reinforced wheels can be mounted on this universal threaded arbor. These are the same wheels that are used on hand-held angle grinders. SPECIFICATIONS • Precision 5/8”- 11 NC male mounting spud • Precision CNC machined from hardened 4140 tool steelFEATURES • Accepts all standard grinding discsBENEFITS • A wide assortment of Work Arbors can be pre-mounted with any grinding disc you wish.

WORK ARBOR ROTARY STORAGE STAND

This handy storage stand holds all of your pre-assembled Work Arbors. It can be mounted in any handy proximity you choose. The stand rotates a full 360 degrees for easy access. Some of our customers use multiple Rotary Storage Stands. SPECIFICATIONS • All metal machined and welded construction • Powder coated and plated finish • Comes with mounting hardwareFEATURES • Rotates 360 degrees • Holds up to 9 Work Arbors safely and compactlyBENEFITS • The close proximity of the stand enables the user to make Work Arbor change outs in less than 10

seconds. • You will always know where your Work Arbors are.DUST COLLECTOR

The Dust Collector serves multiple purposes: containing, collecting and evacuating dust as well as an additional safety shield. SPECIFICATIONS • 16 gauge cold rolled steel machined and welded construction • Powder coat finish • Comes with mounting hardwareFEATURES • Swing open access door enables rapid Work Arbor change out. • The hand screw door lock system affords positive locking. • Standard 2” diameter vacuum tube makes for easy hook up to shop vacs or hard plumbing. BENEFITS • Work area stays cleaner • Other pieces of work bench equipment can be located more closely because of the guarded protection of

the Dust Collector.

WBSTWA $52.42

WBDC $320.57

WBAST $303.86

Glass Polishing KitA low cost solution to those irritating vision impairing scratches

Our glass polishing kit comprises one 2” diameter felt bob mounted on a 1/4” shaft, with a tub of abrasive optical grade Cerium powder, the finest glass polishing compound available.

To remove scratches that you cannot feel with your fingernail, mark them on the inside of the glass with a crayon or a piece of tape. (Deeper scratches may not be possible to completely remove.)

Mix up a small quantity of the abrasive powder with some water to make a wet slurry, and dip the flat end of the felt bob in it. Mount the bob in the fastest electric drill available.

Using the FLAT bottom of the bob, (not the cylindrical side), work the slurry up and down across the scratch until it is removed.

Keep the surface wet - do not allow the slurry to dry out, otherwise the glass will get hot.

Kit Contains:1 x 2” x 1” Cylinder Felt Bob1 x 8oz Cerium OxideInstructions

GPK10 GLASS POLISHING KIT $9.99

CER CERIUM OXIDE REFILL 8 OZ $9.75

Die Grinder & KitA powerful die grinder with all the tools! Ideal for polishing heads, carburetors etc.

The grinder has a ≈ inch and an 1/8 inch interchangeable chuck, so both sizes of felt wheels can be used.

The chuck is tightened using two wrenches, giving a very positive grip.

The kit comprises: 1 x 110 volt die grinder12 x 1/4” inch assorted felt bobs7 miniature assorted felt bobs2 wrenches1 x 1/8” chuck1 x 1/4” chuck1 year warranty on the die grinder.

Our Die Grinder comes with: 1 x 110 volt die grinder2 wrenches1 x 1/8” chuck1 x 1/4” chuck

DGS79 DIE GRINDER KIT $79.00

DG39 DIE GRINDER $29.00

Stones Not Included

Metal Finishing SolutionsTIFFANY GREENThe original solution for the ‘greening’ of the copper components of Tiffany lamps. Apply the solution, undiluted, with a soft paint-brush. Allow to react on the copper overnight.

PROD A01 TIFFANY GREEN 16 FL OZ $19.00

BRONZE & BLACKENING SOLUTIONFor use on Copper and Silver. Mix 1-2 fluid oz of Concentrate to 1 gal water depending on degree of effect required. Dip item into solution for 5-10 seconds, longer for darker effect. Rinse to stop coloring effect. Varying the solution strength and the time of im-mersion can produce an almost infinite range of shades.

PROD A02 BRONZE & BLACKENING SOLUTION 8 FL OZ $19.00

CHOCOLATE BROWNProduces a chocolate brown to antique brown finish on copper and brass. Mix 15% concentrate with 85% water. Use as a dip at room temperature.

PROD A312 CHOCOLATE BROWN 16 FL OZ $19.00

BLACK & BROWN OXIDIZERBlackens silver and nickel and browns copper and brass. Mix 15% concentrate with 85% water. Use as a dip at room temperature.

PROD A313 BLACK & BROWN OXIDIZER 16 FL OZ $19.00

VERDI GREEN On brass and copper. Mix 15% concentrate with 85% water. Use as a dip at room temperature.

PROD A316 VERDI GREEN 16 FL OZ $19.00

GUN METAL BLUE (NOT FOR STEEL)Produces gun metal blue, black, brown and slight purple on copper, brass, bronze, white metals, silver and tin lead alloys. Used at 10-50% by volume at 65-85° F. Does not contain selenium.

PROD A327 GUN METAL BLUE 16 FL OZ $19.00

STAINLESS STEEL BLACKENER 370An acidic liquid concentrate used full strength or diluted with water to blacken stainless steel at room temperature. Recommended for color coding parts and blackening engravings on stainless steels. Produces a pleasing dark gray/black finish.For 300S dilute 4 volumes water to 1 of concentrateFor 400S dilute 3 volumes water to 1 of concentrate

PROD SSB370 STAINLESS STEEL BLACKENER 16 FL OZ $19.00

880 ALUMINUM CHROMATEGives a light iridescent yellow to brown chromate finish for aluminum. Produces the maximum corrosion resistance for chromate finishes on aluminum alloys. Provides excellent protection for aluminum surfaces. The lighter colored coatings have low electrical resistance. It is used at 2-5% by volume @ 90-115° F. Not recommended for high silicon alloys.

PROD A880 ALUMINUM CHROMATE 16 FL OZ $29.00

FLEMISH GREY & BLACKENERFor use on copper, brass and bronze. 15% to 20% by volume solutions produce black to blackish-brown US 10B finishes on cop-per and brass with immersions of 1 to 3 minutes. Diluted 5% to 10% by volume solutions produce lighter flemish and statuary bronzes with 1 to 3 minutes of immersion. Desirable underlying red tones revealed upon highlighting the brown tones.

PROD A311 FLEMISH GREY & BLACKENER 16 FL OZ $19.00

PEWTER BLACKENER For pewter only. Mix 15% concentrate with 85% water. Use as a dip at room temperature.

PROD A325 PEWTER BLACKENER 16 FL OZ $19.00

Swab On Copper BlackenerAn instant acting swab-on/touch-up chemical conversion finish for copper and its alloys. Color can be varied from light brown to brown-to-black.

PROD A324 SWAB ON COPPER BLACKENER 16 FL OZ $19.00

Aluminum Blackener A385An immersion or swab-on finish at room temperature for aluminum surfaces. Mild acidic liquid concentrate used full strength for swab-on finishing and touchup finishing or diluted with 4 parts water for immersion finishing. Frequently used to produce an imi-tation pewter finish on aluminum surfaces.

PROD A385 ALUMINUM BLACKENER 16 FL OZ $19.00

Zinc Blackener A360A room temperature blackening process for die cast and plated zinc surfaces. The very mild acidic liquid concentrate is diluted with 9 parts of water for a 10% by volume working solution. Immersion times of 2 - 5 minutes. Equally effective on cadmium surfaces.

PROD A360 ZINC BLACKENER 16 FL OZ $19.00

PERMATEX® Electrical Contact Cleaner Ideal for sensitive electrical/electronic parts. Non-conductive and non-corrosive cleaner dries in seconds with no rinsing required. Removes grease, oil and other surface contaminants. Contains no CFCs and is safe on all metal surfaces and many plastics.Level 1Suggested Applications:Switches, contacts, relays, motors, PC boards, connectors, tape heads, scales, sensors, control panels.

P24379 16 OZ $13.59

PERMATEX® Pro-Strength Brake & Parts Cleaner Aggressively penetrates, dissolves, and removes oil, grease, brake fluids. Dries fast with no residue. Developed for brake professionals. Contains no ODCs.Level 1Suggested Applications:All brake systems, C.V. joints, machinery, tools, farm equipment.

P82606 20 OZ $3.53

PERMATEX® Non-Chlorinated Brake & Parts Cleaner Penetrates, dissolves and removes dirt and oil from brake systems and metal parts. Safer for aluminum. Leaves no contaminant-attracting residue or chlori-nated solvent run-off. Helps manage EPA halide limits. Level 3Suggested Applications:All brake systems, C.V. joints, machinery, tools, farm equipment.

P82220 20 OZ $3.48

PERMATEX® ELIMINATOR® II Engine Degreaser Quickly dissolves and removes grease, oil and dirt from all types of equipment. Cleans iron, steel, aluminum, magnesium and copper. Not harmful to metal, rub-ber, plastic or concrete. Rinses off easily with water.Level 3Suggested Applications:Engines, garage floors, tools, machinery.

80043 20 OZ $3.49

PERMATEX® MOTOR MUSCLE® Carb & Choke Cleaner Super jet spray quickly cuts and removes grease, gum and varnish. OEM certified. Oxygen sensor safe. Improves performance.Level 3Suggested Applications:Manual and automatic chokes, baffle plates and carburetor linkage.

P80079 16 OZ $3.29

Permatex Cleaners

Permatex® Decal & Paint Stripper Quickly strips and removes decals, stickers, stripes and paint from bumpers, auto and truck bodies. Eliminates costly and time-consuming sanding and scraping. Works in 10-15 minutes at temperatures from 40°F to 100°F (5°C to 38°C). Level 2Suggested Applications:Pinstripes, bumper stickers, decals, various types of paint.

P80577 16 OZ $5.75

PERMATEX® QUICK ORANGE Multi-Purpose Glass Cleaner Quick Orange is a multi-purpose glass cleaner made with an original “no streak, non-running orange scent formula” that deodorizes and cleans window film immediately. This fast acting, professional strength glass cleaner can be used on a variety of sur-faces, including chrome, aluminum, stainless steel and enamel finishes, to remove the toughest grease and dirt (smudges, smoke buildup, bugs, paint overspray).Level 1Suggested Applications:Auto and home glass, chrome, aluminum and stainless steel surfaces.

P82544 20 OZ $2.99

Permatex® Carburetor & Parts Cleaner Excellent cold parts immersion cleaner. Removes grease, gum, varnish, paint and barrel carbon from carburetor assemblies and all metal parts. Works on all types of engines and equipment.Suggested Applications:Removes gum and deposits on throttle plates or choke plates; removes grease from all metal parts.

P82578 1 GAL $23.39

Permatex® Plastic Cleaner Cleans most plastics, without scratching. Removes grease, stains and dirt. Forms a water-repellent, anti-static shield which resists fogging.Suggested Applications:Plastic windows, canopies, instrument covers, goggles, lenses, motorcycle fairings, helmets, boat windshields and fiberglass hulls.

P80183 16 OZ $3.99

PERMATEX® Heavy Duty Radiator Cleaner Removes rust and scale from automotive engines, radiators and water jackets. Cleans and unclogs steam cleaner coils and boiler tubes.Suggested Applications:Engines, radiators, water jackets, industrial and maintenance applications.

P80030 1 QT $6.22

Permatex® Super Glue This formulation was specially designed for a faster, long-lasting bond. It is easily applied and works on nonporous materials.Suggested Applications:Metal, plastics, rubber, vinyl, paper, wood, textiles, and cork gaskets.

P82190 2 GM $1.49

Permatex® Super Glue Gel This no run gel formula “stays put” for precise application, even on vertical surfaces. Also ideal for overhead or hard-to-reach surfaces. It is easily applied and works on both porous and nonporous materials.Suggested Applications:Metal, plastics, rubber, vinyl, paper, wood, textiles, and cork gaskets.

P82191 2 GM $1.79

Permatex Cleaners

Permatex® Plastic Bonder Repairs any automotive plastic. No mixing required. Prepare the surface with the activator, apply the bonding agent, and bond the parts.Suggested Applications:All plastics, even polyethylene and polypropylene

P82565 PERMATEX® PLASTIC BONDER 2 GM $3.49

P25831 PIT CREW’S CHOICE ADHESIVE 2 OZ $3.49

Permatex Super Glue

Permatex Gasket RemoverPERMATEX® Gasket Remover Quickly removes even baked-on gaskets and all types of gasketing adhe-sives and sealants. Removes gaskets from any type of assembly in 10 to 12 minutes. Prepares metal parts for new gasket maker and assembly. Reduces scraping and sanding. Prevents damage to flanges. Level 2Suggested Applications:Removes silicone, weatherstrip adhesive, dried oil, grease and paint

P80646 16 OZ $3.89

PERMATEX® ULTRA BLACK® Gasket Maker For dealership warranty requirements, insures extended drivetrain warranties compliance. Fast-curing formula. Sensor-safe, low odor, non-corrosive. Meets per-formance specs of OE silicone gaskets. Retains high flexibility, oil resistance properties through use of a patented adhesion system. Temperature range -75°F to 625°F intermittent; resists auto and shop fluids and vibration.Suggested Applications:Valve covers, oil pans, intake manifold end seals, timing covers, transmission pans.

P82180 3.35 OZ $4.79

PERMATEX® ULTRA COPPER® Hi-Temp RTV Silicone Gasket Maker For 4-cylinder, turbocharged or high-performance engines. The most advanced, high temperature RTV silicone gasket available. Sensor-safe, low odor, non-corrosive. Superior adhesion. Three times more oil resistant than con-ventional silicones; eight times more flexible than cut gaskets. Temperature range -75°F to 700°F intermittent; resists auto and shop fluids and vibration.Suggested Applications:Exhaust manifolds/headers, valve covers, oil pans, timing covers, water pumps, thermostat hous-ings.

P81878 3 OZ $4.79

Permatex Gasket Makers

PERMATEX® ULTRA GREY® Gasket MakerDesigned for high torque applications (predominantly Japanese designs) requiring a unique RTV gasket. Exceeds manufacturers’ performance requirements. Low odor, non-corrosive. Outstanding oil resistance. Guaranteed not to leak. Temperature range -75°F to 625°F intermittent; resists auto and shop fluids and vibration.Suggested Applications:Valve covers, oil pans, intake manifold end seals, timing covers, water pumps, thermostat housings.

P82194 3.5 OZ $4.99

PERMATEX® ULTRA BLUE® No Leak RTV Silicone Gasket Maker PERMATEX® Ultra silicones were developed to meet today’s technology changes. Sensor-safe, low odor, non-corrosive. Outstanding oil resistance and joint movement values. Eight times more flexible than cork/composite gaskets; three times more oil resistant than conventional silicones. Temper-ature range -75°F to 500°F inter-mittent; resists auto and shop fluids and vibration.Suggested Applications:Valve covers, oil pans, timing covers, transmission pans, differential covers.

P81724 3.35 OZ $4.79

PERMATEX® Sensor Safe Blue RTV Silicone Gasket Maker The original Blue. Will not foul oxygen sensors. Replaces almost any cut gasket. Makes reliable “formed-in-place” gaskets that resist crack-ing, shrinking and migrating. Coats pre-cut gaskets to increase reliability. Temperature range -65°F to 500°F intermittent; resists auto and shop fluids. First generation 1970-1980 gasket maker. Also available in AUTOMATIC TUBE® dispenser.Suggested Applications:Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans.

P80022 3 OZ $3.49

PERMATEX® High-Temp RTV Silicone Gasket Maker Formulated for hi-temp applications, or heavy-duty use (such as towing, etc.). Replaces almost any cut gasket. Makes reliable “formed-in-place” gaskets that resist cracking, shrinking and migrating caused by thermal cycling. Coats pre-cut gas-kets to increase reliability. Tempera-ture range -75°F to 650°F intermittent; resists auto and shop fluids. First generation 1970-1980 gasket maker. Also available in AUTOMATIC TUBE® dispenser.Suggested Applications:Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans.

P81160 3 OZ $4.75

PERMATEX® Sensor-Safe High-Temp RTV Silicone Gasket Maker Formulated for oxygen sensor equipped engines. First generation 1970-1980 gasket maker. Temperature range -75°F to 650°F intermittent; resists auto and shop fluids.Suggested Applications:Valve covers, oil pans, timing covers, water pumps, thermostat housings, transmission pans

P81422 3 OZ $4.75

PERMATEX® Water Pump & Thermostat RTV Silicone Gasket Maker A non-corrosive, sensor-safe RTV silicone gasket material formulated specifically for water pumps and thermostat housings. Highest water-glycol resistance available in an RTV silicone.Suggested Applications:Water pump and thermostat housings.

P22071 0.5 OZ $2.25

Permatex® Anaerobic Flange Sealant Flexible, gasketing material for use on rigid machined flanges with less than .015” gap. OEM approved - use where OE’s specify “anaerobic” gasket (cures in the absence of air). Eliminates preformed, pre-cut, paper, rubber and cork gaskets. Flexes with flanges that move in service.Suggested Applications:Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, o-ring replacement.

P51531 50 ML $2.79

Permatex Gasket Makers

Permatex® Anaerobic Gasket Maker Noncorrosive gasketing material designed primarily for use on aluminum, iron, and steel flanged mating surfaces. Ideal for on-the-spot and emergency repairs, or when a conventional gasket is unavailable. Fills gaps up to .015” and cures to a solvent-resistant seal that will not tear or decay during service. Parts disassemble easily even after extended service and old gasket material can be removed in minutes with a simple putty knife.Suggested Applications:Water pumps, thermostat housings, transmission pans, transmission case covers, transaxle casings, o-ring replacement.

P51817 6 ML $3.59

Permatex® Low Strength Threadlocker PURPLE OEM specified. Low strength threadlocker designed for fasteners under 1/4” (6mm) that require occasional adjustment. Removable with hand tools for easy disassembly. Noncorrosive.Suggested Applications:Carburetors, relay locks, headlamps, throttle body assembly, choke assembly and fuel injection set screws, body panel mounting fasteners.

P24024 6 ML $5.99

Permatex® Medium Strength Threadlocker BLUE OEM specified. All-purpose, medium strength threadlocker. Ideal for all nut and bolt applications 1/4” to 1” (6mm to 25mm). Eliminates need for stocking expensive lock nuts and lock washers. Locks and seals while preventing parts loosening due to vibration. Protects threads from corrosion. Removable with hand tools for easy disassembly.Suggested Applications:Valve cover bolts, water pump bolts, oil pan bolts, drive shaft bolts, rocker arm adjustment nuts, carburetor studs

P24200 6 ML $5.99

Permatex® Permanent Strength Threadlocker RED OEM specified. A permanent, high strength prod-uct that is applied to fasteners 3/8” to 1” (10mm to 25mm) in size before assembly. Designed for securing parts that must withstand heavy shock, vibration, or extreme chemical or environmental conditions. Localized heating and hand tools are required to separate parts.Suggested Applications:Assembly with air tools, cylinder block bolts, ring gear bolts, transmission shaft bolts.

P19962 6 ML $5.99

Permatex Threadlockers

Permatex® High Strength Threadlocker RED OEM specified. High strength threadlocker for heavy-duty applications. Especially well-suited for permanently locking studs and press fits. Adds 3,000 PSI holding power on slip and press fit assemblies. Replaces set screws and snap rings. Locks against vibration loos-ening. Requires extra effort or special tools for removal.Suggested Applications:Cylinder block and rocker arm studs, ring gear bolts, frame bolts, shock absorber bolts.

P27100 6 ML $5.99

Permatex® High Temperature Threadlocker RED OEM specified. Hi-temp/hi-strength threadlocker for heavy-duty applications. Prevents bolts and press fits 3/8” to 1” (10mm to 25mm) from loosen-ing due to shock, severe vibration and heat stress. Exclusive formulation for newer engines and high performance applications that require extreme temperature resistance. Suited for temperatures up to 450°F (232°C). Removable with heat and hand tools.Suggested Applications:Camshaft sprocket bolts, crankshaft bolts, idler bearings, press fit filler tubes, transmission input and output shaft threads, ring gear or shock bolts.

P24026 6 ML $6.49

Permatex Threadlockers

Permatex® Penetrating Grade Threadlocker GREEN OEM specified. A low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners rang-ing from #2 to 1/2” (2.2 to 12mm) in size. Localized heating and hand tools are needed for disas-sembly.Suggested Applications:Bolts on alternators, air conditioning belts and distributor clamps, carburetor adjustment screws, hairline cracks.

P29000 6 ML $5.99

Permatex® High Performance Thread Sealant OEM specified. Formulated specifically for metal, ta-pered pipe thread fittings, High Performance Thread Sealant replaces Teflon® tape and pipe dopes. Cures rapidly to withstand 10,000 PSI. Perfect as a replacement for Vibra-Seal® pre-coated parts. Prevents galling and protects mated threaded areas from rust and corrosion. It is certified to ANSI/NSF Standard 61 for use in potable water systems.Suggested Applications:Stainless steel fittings, head bolts into through holes, oil PSI sending units/sensors, oil and coolant lines, intake manifold switches, rear axle fill plug, fuel fittings.

P56521 50 ML $11.39

PERMATEX®Pipe Joint Compound Universal sealant. Lubricates and seals threaded joints on water, oil and fuel lines. Temperature range -65°F to 400°F; resists common shop fluids.Suggested Applications:Thread fittings, plumbing applications.

P80045 16 OZ $6.75

Permatex® Stripped Thread Repair Makes reliable thread repairs without drills, taps, tools or in-serts. Restores worn, stripped or damaged threads and eliminates future corrosion, galling, seizing and rust. Effective up to 128 ft. lbs. of torque and between -65°F to 300°F. Repairs most metal-to-metal fasteners up to SAE grade 5 English and 8.8 metric (coarse and fine).Suggested Applications:Intake manifold bracket fastener threads, timing chain cover bolt threads, valve cover bolt threads, water pump bolt threads.

P81668 0.44 oz $8.99

Permatex® Bearing Mount for Close Fits OEM specified. A low viscosity, rapid-curing anaerobic adhesive that augments the strength of press fit assemblies or slip fit assemblies up to .005” in diameter. Adds up to 3,000 PSI holding power.Suggested Applications:Bushings, bearings, oil seals, ring gear bolts, differential lock pins.

P60940 36 ML $27.49

Permatex Retaining Compounds

Permatex® High Strength Sleeve Retainer OEM specified. High temperature anaerobic adhesive that secures slip and press fit assemblies. Adds up to 3,000 PSI holding power. Restores fit to worn or out-of-tolerance assemblies. Prevents surface corrosion.Suggested Applications:Cylinder sleeves, valve guides, valve seats, bearings and bushings, woodruff keys, liner assemblies.

P64040 36 ML $27.49

Permatex® Bearing Mount for Relaxed Fits OEM specified. High strength, medium viscosity an-aerobic adhesive for slip fit assemblies. Provides 4,000 PSI shear strength on steel. Fixtures in 10 minutes at room temperature.Suggested Applications:Replaces set screws, replaces clamp rings, replaces snap rings, wheel bearings, idler shaft, press fit bearings.

P68040 36 ML $27.49


Permatex® Penetrating Grade Threadlocker GREEN OEM specified. A low viscosity threadlocking liquid that wicks along the threads of preassembled fasteners to secure them in place. Since it is applied after assembly, preventive maintenance procedures are simplified. Ideal for fasteners rang-ing from #2 to 1/2” (2.2 to 12mm) in size. Localized heating and hand tools are needed for disas-sembly.Suggested Applications:Bolts on alternators, air conditioning belts and distributor clamps, carburetor adjustment screws, hairline cracks.

P29000 6 ML $5.99

Permatex® Bearing Mount for Worn Parts OEM specified. A creamy, non-running adhesive used be-tween parts to repair large gaps and severely worn parts. Fills gaps to .020” in diameter. Very rapid cure.Suggested Applications:Refitting worn shafts and housings, repair worn keyways, repair loose set screws, refit worn cou-plings, form-in-place shims.

P20295 50 ML $29.99

PERMATEX® FAST BREAK® Super Penetrant Permatex® FAST BREAK® Super Penetrant, Heavy-duty penetrant for rusted and frozen assemblies. Works quickly to penetrate and loosen rust, tar, grease, dirt, carbon deposits and corrosion from metal parts. Frees frozen nuts, bolts and fittings in all typesSuggested Applications:Lubricates to free any corroded or seized part. Penetrates rust, scale, paint, varnish, carbon or gum.

P80052 16 OZ $3.09

PERMATEX® White Lithium Grease Permatex® White Lithium Grease, All-purpose white lubricant that protects against rust and makes surfaces friction free. Nontoxic. Stainless. Withstands moisture and high heat. Suggested Applications: Door hinges, hood latches, trunk latches, hatchback stSuggested Applications:Door hinges, hood latches, trunk latches, hatchback struts, seat tracks, garage door and delivery truck door tracks.

P81981 16 oz $4.75

PERMATEX® Silicone Spray Lubricant Permatex® Silicone Spray Lubricant, Lubricates and water-proofs all types of mechanical equipment. Stops friction and squeaks; coats hinges and channels. Prevents locks, doors and windows from binding. High silicone formula does not attract dust or dirt.Suggested Applications:Lubricates door locks, trunk lids, brake cables and rubber molding.

P80070 16 OZ $3.49

Permatex Lubricants

Permatex® Chain Lube Cleans, lubricates and protects all types of roller chains that operate under ex-posed conditions. Easy-to-apply foaming action assures effective application. Level 3Suggested Applications:Ideal for any chain-driven tool or vehicle such as motorcycles, mopeds, chainsaws, lawnmowers and bicycles.

P80075 6 OZ $3.09

Permatex® Force 109® 5-Way Spray General-purpose lubricant quickly penetrates, lubricates, dries, frees and protects parts and assemblies. De-moisturizes electrical contacts and equipment. Seals out moisture and lubricates moving parts. Level 3Suggested Applications:Suggested Applications: Hundreds of applications for the home, farm, auto or shop.

P80068 12 OZ $3.39


Permatex® Copper Anti-Seize Lubricant A premium quality copper anti-seize and thread lubricant that may be used to prevent seizing, corrosion and galling where high temperature conditions exist. Contains a high percentage of micro-fine copper flakes in a semi-synthetic grease carrier and is for-tified with high quality rust and corrosion inhibitors. Temperature range: -30°F to 1800°F. Provides good electrical conductivity. Meets Mil Spec #907E.Suggested Applications:Spark plug threads installed in aluminum, exhaust manifold bolts, engine bolts, oxygen sensors, knock sensors, thermostat housing bolts, fuel filter fittings, and battery cable connections.

P09128 8 OZ $9.35

Permatex® Nickel Anti-Seize Lubricant Protects metal parts from seizing and galling at tempera-tures up to 2400°F. It is recommended where copper contamination must be avoided, under condi-tions of extreme pressure and temperature, and with stainless steel, titanium and nickel alloys.

P77124 8 OZ $16.09

PERMATEX® Black Silicone Adhesive Sealant General-purpose, black RTV indoor/outdoor sealant. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weatherstripping and vinyl tops. Protects and repairs electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof and flexible. Temperature range -80°F to 450°F; resists oil, water, weather, vibration, grease. Suggested Applications:Windshields, door frames, electrical connections, seams and roofs, vinyl tops, weatherstripping.

P81158 3 OZ $3.49

PERMATEX® Clear Silicone Adhesive Sealant General-purpose, clear RTV indoor/outdoor sealant. Seals, bonds, repairs, mends and secures glass, metal, plastics, fabric, vinyl, weatherstripping and vinyl tops. Protects and repairs electrical wiring. May be applied to horizontal or vertical surfaces. Waterproof and flexible. Temperature range -80°F to 450°F; resists oil, water, weather, vibration, grease. Also available in AUTOMATIC TUBE® dispenser.Suggested Applications:Windshields, door frames, electrical connections, vinyl tops, seams and roofs

P80050 3 OZ $3.49

PERMATEX® Flowable Silicone Windshield and Glass Sealer Wicking action silicone “seeks the leak”. Flows into hidden and hard-to-reach areas. Forms a tough, waterproof, durable, clear seal that is resistant to weather, extreme temperatures, vibration, shock and most shop chemicals. Fills surface voids and irregularities. Temperature range -80°F to 450°F.Suggested Applications:Windshields, sunroofs, windows, headlamp assemblies, marine glass, RV vents and windows.

P81730 1.5 OZ $2.99

Permatex Sealants

PERMATEX® Auto Glass Sealer Seals out leaks and drafts around windows. Makes a tight, permanent seal. Can be used for glass, metal, wood and rubber. Economical clear sealant.Suggested Applications:Car windows, windshields, sunroofs

P80329 1.5 OZ $2.09

PERMATEX® FORM-A-SEAL® Leak Repair Forms a durable rubber barrier that stops leaks in min-utes without part removal. Many auto, home, shop, garage, farm, marine and industrial uses. THE SPRAYABLE SEALER eliminates the need for liquid additive sealers. Resists common shop fluids. Level 3Suggested Applications:Engine and transmission leaks, cooling systems, plumbing, masonry, wood, plastics, glass, PVC.

P82096 6 OZ $6.49

Permatex Sealants

Permatex® Rearview Mirror Adhesive Approved and used by GM, Ford and Daimler-Chrysler. Per-manently remounts mirrors to windshields. Achieves handling strength in seconds; mirror-mounting strength in 15 minutes. Available in single and multi-applications. ODC-free.Suggested Applications:Mounting rearview mirrors to windshields.

P81844 0.6cc $2.65

Permatex® Bullseye™ Windshield Repair Kit The first one-component windshield repair system designed to be used by the car owner. Requires no mixing, no heat. Safe and easy to use. Has the same index of refraction as the original glass to make the repair virtually undetectable.Suggested Applications:Minor chips, scratches and bullseyes in windshields or other glass windows.

P16067 $9.99

Permatex® Electrically Conductive Rear Window Defogger Tab Adhesive Quickly and easily bonds defogger tab to grid on rear window. Provides a low-cost, high-quality repair for damaged rear win-dow defogger tabs. Complete kit for a quick repair.Suggested Applications:Rear window defogger tabs

P21351 $8.99

Permatex® Quick Grid™ Rear Window Defogger Repair Kit Provides a low-cost, high-quality repair for damaged rear window defogger grids. Complete kit for a superior repair. Quick Grid™ is the result of a joint research project with the General Motors Research Center.Suggested Applications:Rear window defoggers

P15067 1.4 ML $10.49

PERMATEX® Ultra Disc Brake Caliper Lube - Single Use An environmentally-friendly, green, non-melting, synthetic lubricant. It is formulated to lubricate under the most adverse brake conditions, assuring that critical caliper pins, sleeves, bushings and pistons remain lubricated throughout pad life.Suggested Applications:Caliper pins, sleeves, bushings and pistons.

P09177 5 GM $0.99

Permatex® Disc Brake Quiet Stops brake squeal by dampening vibration at caliper/brake pad inter-face. Provides tighter fit and allows for easier disassembly. Protects against corrosion. Compatible with anti-lock brake systems. Aerosol - Level 3Suggested Applications:Automotive disc brakes, outboard and inboard pads for disc braking systems.

P80729 0.5 FL OZ $2.69

Permatex® Quick Solder™ Radiator Repair Kit Seals small holes, seams, leaks in tanks and inlet/outlet tubing. Cures in only 60 minutes. Withstands normal operating temperatures and pressures. Repairs steel, brass and aluminum radiators. Excellent water, alcohol and antifreeze resistance.Suggested Applications:Radiators in cars, trucks, farm equipment.

P12195 1 OZ $4.99

PERMATEX® Gas Tank & Radiator Repair Seals small holes and weak seams in gas tanks without welding or tank removal. Repairs leaks and holes in all types of radiators. Permanent. Hardens in 60 minutes.Suggested Applications:Holes and seams in gas tanks, radiators or gas cans.

P80884 1 OZ $4.33

Permatex Repair Products

Permatex® Instant Gas Tank Repair Instantly seals small holes in gas tanks without tank removal. Sticks to “gasoline-wet” metal. Dries to a hard seal. Hardens in 60 minutes. Easy-to-use, two-part epoxy ribbon. No measuring. Permanent.Suggested Applications:Gas tanks in cars, trucks, farm equipment

P12020 1 OZ $4.49

PERMATEX® Muffler & Tailpipe Bandage Epoxy impregnated fiberglass bandage chemically welds mufflers and tailpipes. Permanently repairs holes and leaks in exhaust systems saving costly part replacement. Seals out poisonous fumes to temperatures of 800°F (426C).Suggested Applications:Mufflers, tailpipes on automobiles, trucks, tractors and farm equipment.

P80331 84 SQ” $1.69

PERMATEX® Muffler & Tailpipe Putty Permanently repairs holes and leaks in exhaust systems. Seals out fumes at temperatures up to 2000°F (1000°C). Safe for catalytic converters. 2-pouch bonus pack.Suggested Applications:Mufflers, tailpipes, joints and catalytic converters.

P80333 4 OZ $2.65

PERMATEX® 1000° PLUS Exhaust Repair Kit Complete kit for repairing cracks and splits in mufflers, tailpipes and exhaust pipes. Withstands temperatures over 1000°F (540°C). Kit contains ready-to-use foil packed bandage and support wire.Suggested Applications:Mufflers, tailpipes on automobiles, trucks, tractors and farm equipment.

P80334 1 KIT $3.14

PERMATEX® Muffler & Tailpipe Sealer Seals holes and leaks in mufflers, tailpipes and around joints. Makes new installations more secure. Resists temperatures to 2000°F (1000°C).

Suggested Applications:Mufflers, tailpipes, joints and catalytic converters.

P80335 3 OZ $1.99

PERMATEX® Hi Temp. Metal Repair Compound Makes long-lasting repairs to high-temp, low pres-sure exhaust leaks from the exhaust manifold to the muffler. Gets stronger with heat up to 2000°F. One part, water-based ceramic is safe and easy to use.Suggested Applications:Cracked and broken exhaust manifolds, headers, furnaces.

P26346 20 GM $9.29

Permatex® Hi-Temp Aluminum Repair Compound A single use, 2-part casting repair compound for use on aluminum parts with temperatures up to 800°F (427°C). Developed specifically to repair pin holes, warps and cracks in aluminum castings and molds. Environmentally friendly. Contains no asbestos or volatile organic compounds. Resistant to thermal shock and common automotive fluids.Suggested Applications:Aluminum engine parts such as cylinder heads and intake manifolds.

P31372 15 GR $9.49

Permatex® O-Ring Splicing Kit Makes custom o-rings on the spot. Eliminates the need to disassem-ble parts and components. Includes adhesive waterproofing solution, cleanup solvent, cutting blade, splicing fixture and 12 ft. of Buna-N cord stock.Suggested Applications:Custom o-rings

P00112 1 KIT $81.99


PERMATEX® ULTRA SLICK Engine Assembly Lube Proper lubrication of metal mating surfaces is es-sential prior to starting a new or rebuilt engine. ULTRA SLICK‘ has superior adhesion to component surfaces to prevent scuffing and galling during initial start-up. Meets or exceeds OEM performance specs for engine assembly lubricants.Suggested Applications:Engine bearings, camshafts, lifters, valves, guides and rocker shaft assemblies.

P81950 4 OZ $3.85

PERMATEX® Valve Grinding Compound Aids valve grinding and seating operations to remove burrs, surface defects, carbon, gum and corrosion. Can be used for lapping and grinding chromium. Mixes with water to form an easy-to-use paste.Suggested Applications:Seat valves, sharpen reel type lawn mowers.

P80036 1.5 OZ $2.85

PERMATEX® Prussian Blue Aids precision fitting of machined surfaces. Locates high spots on bear-ings, valves, gears and other close-to-tolerance components. Non-drying. Easy clean-up.

Suggested Applications:Bearings, valves, gears, other close tolerance or machined assemblies.

P80038 0.75 OZ $2.89

Permatex® Screw & Socket Gripper Contains unique friction particles that create a positive grip between hand tools and fasteners. Apply and use immediately as it does not require shaking or mix-ing. Paste formula works on vertical surfaces without running off. No shelf-life limitations.Suggested Applications:Works on all hand tools and fasteners including: Allen, Cabinet, Clutch Head, Frearson, Hex, Key-stone, Phillips, Slotted, Square and Torx fittings.

P09120 0.51 OZ $2.59

PERMATEX® Spray Adhesive Dries clear with superior bonding strength. For permanent or reposi-tionable applications. Unique formula resists water, humidity. Applications include porous and non-porous materials. Level 3Suggested Applications:Excels at attaching upholstery cloth, carpeting, floor mats, insulation, kick and silencer pads to metal, wood or KB board.

P82019 16 OZ $5.99PERMATEX® Undercoating Protects fenders, frames, fuel tanks, door panels, rocker panels, hoods and firewalls against moisture, road salt and corrosion. Won’t sag or drip. Sound-proofs and insu-lates. Body shop proven.Level 3Suggested Applications:Wheel wells, rocker panels, frames and underbody, body repairs, rust holes, tree pruning, driveway cracks, minor roof repairs, post preserver.

P80072 16 OZ $3.49

Permatex® Heavy Duty Rubberized Undercoating Now with an improved formula! Rubberized for maxi-mum durability; seals, protects and insulates. Excellent professional blend all-purpose coating. Ideal for home or shop use. Level 3Suggested Applications:Automotive frames, rocker panels and wheels. Other uses include sealing gutters, roofs, drain systems and tree pruning.

P81833 20 OZ $3.49

PERMATEX® NAVAL JELLY®*Rust Dissolver Chemically removes rust from all iron and steel surfac-es. Brush or spray on, wash off application. Replaces sanding and scraping.Suggested Applications:Iron and steel surfaces on cars, trucks, motorcycles.

P81756 8 OZ $3.59


PERMATEX® ULTRA SLICK Engine Assembly Lube Proper lubrication of metal mating surfaces is es-sential prior to starting a new or rebuilt engine. ULTRA SLICK‘ has superior adhesion to component surfaces to prevent scuffing and galling during initial start-up. Meets or exceeds OEM performance specs for engine assembly lubricants.Suggested Applications:Engine bearings, camshafts, lifters, valves, guides and rocker shaft assemblies.

P81950 4 OZ $3.85

PERMATEX® Auto Trim Adhesive A no-mix, flexible repair. Cures in seconds only AFTER assembly without clamps, heat or extensive precleaning. Weatherproof.Suggested Applications:Broken body moldings, trim and emblems.

P80885 0.07 OZ $2.99

PERMATEX® Weatherstrip Cement A translucent cement and sealer which bonds in minutes. Dries to a tough, strong bond.Suggested Applications:Door and windshield weatherstripping.

P80328 2 OZ $1.75

Permatex® Black Super Weatherstrip Adhesive A professional, black weatherstrip adhesive that blends with automotive weather stripping for less clean-up. Withstands temperature extremes. Re-sistant to gasoline, kerosene, antifreeze and most solvents. Permanently bonds automotive weather stripping. Bonds automotive gaskets. A superior adhesive for bonding a variety of common materi-als. Suggested Applications:Cut gaskets, auto or van carpeting, door and trunk moldings, vinyl tops, fabric-backed vinyl uphol-stery, headliners.

P81850 5 OZ $4.59

PERMATEX® Super Weatherstrip Adhesive A superior adhesive ideal for many applications includ-ing rubber, metal, auto/van carpeting and fabric-backed vinyl upholstery and automotive gaskets. Allows for repositioning parts after contact is made. Withstands extreme temperatures. Waterproof. Resists gasoline, kerosene, antifreeze and most solvents.Suggested Applications:Auto or van carpeting, all types of weatherstripping, door and trunk moldings.

P81731 5 OZ $4.59PERMATEX® BODY SHOP® Heavy Duty Headliner & Carpet Adhesive High-strength spray adhesive designed for repairing interior parts which have become detached or loosened. VOC compliant, it bonds foam, fabrics, plastics, rubbers, and other automotive materials. Resistant to extreme weath-er conditions. Water-resistant. Dries clear for neat appearance. High temperature formula. Level 4

Suggested Applications:Headliners, carpets, trunk linings, and inside door panels.

P27828 16.75 OZ $9.99PERMATEX® Dielectric Tune-up Grease Protects electrical connections and wiring from salt, dirt and corrosion. Extends the life of bulb sockets. Prevents voltage leakage around any electrical con-nection. Also prevents spark plugs from fusing to boots. Required for modern high energy ignition systems. Suggested Applications:Marine and automotive electrical connections, spark plug boots, trailer hitches, battery terminals.

P22058 3 OZ $7.75

PERMATEX® Fabric Repair Kit Repairs automobile upholstery, carpet, clothing and furniture. Matches popular colors and textures. Contains: 7 cups fabric repair compound in assorted colors (net 1/8 fl. oz.), 2 cups fabric air dry adhesive (net 1/8 fl. oz.), screen applicator, application spatula, mixing bottle, in-struction card with color-matching chart.Suggested Applications:Automotive and home fabric upholstery and carpet, clothing.

P25247 $11.75

PERMATEX® Vinyl and Leather Repair Kit A complete repair kit for home and automotive vinyl and leather upholstery. Contains: heat transfer tool, 7 OEM color compounds, clear vinyl adhesive and filler (net .34 fl. oz.), grain pattern paper, plastic spatula.Suggested Applications:Vinyl and leather car upholstery, infant car seats, chairs, stools, marine upholstery, luggage.

P80902 $11.29


PERMATEX® Pro Style Vinyl and Leather Repair Kit A complete professional kit with plug-in electric heat iron to make pro-style repairs. Contains: professional electric heat tool, 7 OEM color com-pounds, clear vinyl adhesive and filler (net .34 oz.), grain pattern paper, metal spatula, plastic dashboard hardening powder.Suggested Applications:Vinyl and leather upholstery, dashboards, vinyl tops, marine upholstery, luggage.

P81781 $15.99

PERMATEX® Dashboard & Vinyl Top Repair Kit Special repair compounds designed to repair dash-boards and vinyl tops. Contains: heat transfer tool, 7 OEM color compounds, clear vinyl adhesive and filler (net 34 fl. oz.), grain pattern paper, plastic spatula, plastic dashboard hardening powder.Suggested Applications:Dashboards and vinyl tops.

P81785 $11.99

PERMATEX® Super Clear Vinyl Sealant Repair Kit Makes invisible repairs from rips, cuts and tears to upholstery, luggage, clothing, etc. Contains: clear vinyl sealant and filler (net 1.5 fl. oz.), special applicator nozzle, grain pattern paper.Suggested Applications:Rips and cuts in luggage, rainwear, vinyl boots, automotive, marine and home upholstery.

P81786 $2.79

Permatex® Fiberglass Patch Kit Complete epoxy-based kit for bridging holes and rusted areas in metal, wood, and fiberglass. Includes one 1 fl. oz. tube of resin, one 1 fl. oz. tube hardener, fiber-glass cloth, spreader and mixing stickSuggested Applications:Automotive and marine applications.

P80265 $4.95

PERMATEX® Battery Protector Stops terminal corrosion and increases battery life. Spray on battery terminals, in or out of storage.Level 3Suggested Applications:Automotive, marine, farm machinery and motorcycle batteries

P80370 6 OZ $2.85

PERMATEX® Battery Cleaner Spray it on and wash corrosion off. Works in just three minutes.Level 1Suggested Applications:Automotive, marine, farm machinery and motorcycle batteries.

P80369 6 OZ $2.85

PERMATEX® Ignition & Wire Dryer De-moisturizes wet electrical wiring connections and ignition wires. Helps start wet engines. Seals out corrosion-causing moisture to ensure proper electrical cur-rent flow. Reduces engine, starter and battery wear. Level 1Suggested Applications:Engines, starters, battery connections.

P81082 6 OZ $3.29

WHITE LETTER TIRE CLEANER Cleans raised white lettered and whitewall tires, quickly and easily. Contains NO harmful bleach or chlorineAlso cleans tire browning and blackwall tires.

WLC-18 18 OZ $3.99

ONE TOUCH® All Wheel Care Cleans, shines and protects wheels.The unique formula loosens road grime and brake dust. Leaves a shiny and protective barrier.

AWC20-6 20 OZ $4.49

No Touch Products

AUTO GLASS STRIPPER Heavy duty cleaner specially formulated for auto windshields. Removes silicone build-up, hard water stains, mud, oil and tar that other cleaners cannot. Also available in a convenient pouch that cleans one standard windshield.

GS8-12 8 OZ $5.49

GLASS & SURFACE CLEANER Extra strength automotive formula safely cleans glass and hard sur-faces - like bumpers and chrome. Safe for interior hard vinyl surfaces. Available in foaming aerosol and clear liquid trigger sprayer.

GSC20-12 20 OZ $3.99

Instant RAIN SHIELD® Forms an instant coating on windshields to repel rain, sleet and snow. Spray on in rainy conditions and let your wipers do the work. No wiping or buffing. Great for highway driving.

RS6-12 6 OZ $5.49

WET ‘N’ PROTECT Wet Tire Finish Clear liquid “Wet” tire finish easily sprays on clean tires for an ultra high-gloss finish. Protects against ozone damage, dirt and dust. Streak free -- Guaranteed! Contains NO petroleum distillates..

WPBP15-6 15 OZ $6.79

ORDER FORM7696 Route 31, Lyons NY 14489 USAPhone: 315.946.1213Fax: 315.946.4456http://www.caswellplating.com

QTY CODE DESCRIPTION HOLE SIZE PRICE TOTAL

SUB TOTAL

GROUND SHIPPING

HAZMAT CHARGE

SALES TAX (NY RESIDENTS ONLY)

TOTAL

UPS GROUND SHIPPING RATES

ORDER TOTAL SHIPPING RATE

$0-$20 $6.00

$20-$100 $8.00

$100-$300 $11.00

$300-$500 $15.00

$500+ $19.00

Billing Address (Match Credit Card)

Name: ____________________________________________ Company: _________________________________________

Address: ________________________________________________________________________________________________

City: _______________________________________________ State: __________________ Zip: ____________________

Shipping Address (No PO Boxes)

Name: ____________________________________________ Company: _________________________________________

Address: ________________________________________________________________________________________________

City: _______________________________________________ State: __________________ Zip: ____________________

Phone: ____________________________________________ Fax: _______________________________________________

E-Mail: _________________________________________________________________________________________________

Credit Card Number: ______________________________________________________________________________________

Exp Date: _________________ Date Of Order: _________________

Signature: ______________________________________________________________________________________________

Check or Money Order Payable To Caswell Enclosed For: _____________

$20.00 HAZMAT CHARGE PER HAZMAT PRODUCT ORDEREDPLEASE CALL FOR RATES TO AK, HI & REST OF WORLD

SORRY, NO COD’S

Caswell Inc. AlsoAccepts Checks

By Phone. Call Us.

Sales Terms

Placing An OrderBy Phone: Call (315) 946-1213 between 9:00AM - 4:00PM EST Mon-Fri. We will be happy to assist you.By Mail or Fax: When ordering by mail or fax (315) 946-4456, please be sure to include the following information: -

• Complete catalog description, including product number, description, size, price etc.• Credit card number, check or money order for the full amount including shipping/handling.• Your address, complete with zip/postal code and phone number. No PO Boxes on orders other than Plating Manual orders.

International Customers: Please call or write for shipping options and costs. Please provide your full address, including Postal Code, when ordering. Caswell Inc. can not be responsible for lost packages where no Postal Code was given. Provide a telephone number to ease correspondence. Include your country code, please.By E-Mail or The World Wide Web: Orders are accepted online on our secure server at http://www.caswellplating.com . Should you have difficulty using this system, please call or fax to place your order. Our e-mail address is [email protected].

Terms & Conditions Of SalePayment: Items ordered must be paid for in full before items will be shipped. We accept all major credit cards. Items purchased by personal or company checks will be held for 2-4 weeks, to allow check to clear. If you wish to pay by check, you can pay by check by phone and your check will not be held.

Pricing & Specifications: All prices are in US Dollars, and do not include freight and handling charges, state or federal taxes, import duties, brokerage fees or any other fees imposed by a third party for handling of the shipment. Due to changing economic condi-tions, prices, colors & specifications are subject to change without notice. We reserve the right to ship an alternative product of equal or greater value, depending on inventory levels. Whenever possible, we will attempt to contact the buyer before shipping if an item has changed.

Hazardous Goods: Some of our products are classified as hazardous goods by the US DOT, Transport Canada & IATA. These prod-ucts will incur an additional charge when shipped by ground, and cannot be shipped by air or internationally. No guaranteed time of delivery is available on Hazardous Goods Shipments. These products are noted in our catalog by the DOT diamond hazard label. DO NOT re-ship, return or re-sell these items without using the proper packaging & labeling. Consult 49 CFR for DOT regulations. Seri-ous fines or imprisonment may result from incorrect shipping of hazardous goods.

Exclusive Warranty & Limitation Of Remedies & Damages: Products distributed from Caswell Inc. are warranted to be free of defects in material and workmanship at time of shipment to the extent of the manufacturer’s express warranties to Caswell Inc. or for 30 days, whichever is greater. Caswell Inc.’s liability and Buyer’s remedies under this warranty shall at our option be limited solely to repair, replacement or credit. Buyer shall at Caswell Inc.’s option return any alleged defective product to Caswell Inc. at Buyer’s expense. This warranty extends to original Buyer only. THIS WARRANTY IS EXCLUSIVE AND IS IN LIEU OF ANY OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Caswell Inc. SHALL NOT BE LIABLE UNDER ANY CIRCUMSTANCE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING, BUT NOT LIMITED TO LABOR COSTS OR LOSS OF PROFITS ARISING IN CONNECTION WITH THE USE OF OR INABILITY TO USE PRODUCTS PURCHASED FROM Caswell Inc..

Shipping Policy: Most products are shipped from stock FOB from Lyons NY. All other products are shipped FOB from the manufac-turer. Delays may occur when an item is shipped from the manufacturer and is back ordered. We will advise when this occurs. We ship UPS. Some small items may be shipped by US Mail. Next Day & Two Day Service is available on telephone orders placed before 1:00PM EST. Caswell Inc. makes no delivery time guarantees. Paying for air shipping simply means that an order will be shipped by air, not that it will arrive on a certain day. Pickup times and backlogs necessitate this clause. Caswell Inc. assumes no liability for a carriers inability to pick up an express order because of bad weather or any other condition. International orders are shipped by UPS or other at the Buyer’s discretion. When shipping by mail, we will insure the package for the replacement value, but we will NOT be able to replace the package until the insurance settlement is processed (1-4 months). Some items are considered Dangerous Goods when shipped internationally. We are unable to ship these items outside the USA.

Damaged Shipments: Shipping accidents do occur. If damage has occurred, please call us immediately with the invoice number and tracking number of the package. Please note the condition of the packaging and retain it in case the shipper requires an inspection. Our responsibility for damage ceases when the carrier accepts the shipment, please contact the carrier to make damage claims.

Technical Support: We offer free technical support for all our products. Should you have difficulty obtaining the desired results, you may contact us for help. We offer free telephone support (toll charges may apply) and free web based support. Please see our sup-port section for details.

Returning Goods: Returns may be subject to a 15% restocking fee. Before returning products, you should attempt to remedy any problems by calling us to receive technical advice. Our plating kits use basic electrochemical reactions that have been used as the basis for electroplating for hundreds of years. Products may be returned on the following conditions:-

• The product must have been purchased within 30 days.• Crystals that have been made up into solution may not be returned.• The Complete Plating Manual may not be returned. Refunds for kits will be for $20 less than the price of the kit to cover the cost of the manual. Videos may not be returned.• Products must be in new and unused condition and will be subject to inspection for damage or misuse prior to the issuance of a refund.• Shipments must be made by a carrier that uses tracking numbers and must be prepaid. Care must be taken to ship all Hazard-ous Goods with the correct labeling & packaging.• A copy of the original invoice must be included, clearly indicating any or all items being returned.• Products may not be returned without approval. Please call for an authorization and clearly write this authorization on the front of the package. Shipments without this authorization will be refused.

HAZMAT Product. Cannot be shipped by air, to AK, HI or outside the USA. $20 charge per product applies.

ORM-D Product. Cannot be shipped by air, or to AK, HI or outside the USA

A

Abrasive Nylon Wheels 48Abrasive Wheel System 50Acrylic Buff 47Airbrush Set 96Air Agitation Supplies 89All Sisal Buffs 47Alumilite Molding Products 100Aluminum & Copper Polishing Kit 49Aluminum Anodizing Kit 12Ammonia Be Gone 92Anodizing Dyes 14Arbor Adapters 54Assembly and Gear Lubricants 74Assorted Felt Bob Kit 51

B

Bake On Ceramic Coatings 75Balloon Felt Bob 51Ball Felt Bob 51Bench Mandrels 54Black Krome™ Plating Kit 28Black Oxide Kit 43BLACK SATIN HEADER COATING 72Blasting Media 82, 83BLUE BEGONE™ 96Boron Nitride Electroless Kit 25Brass Plating Kit 30Brass Wire Shank Mounted Wheel 48Bright Acid Copper Plating Kit 19Bronze Plating Kit 35Buffing Compound 55 - 60Buffing Kits 52Buffing Machines 104Bullet Felt Bob 51

C

Canton Flannel Wheels 46Cape Cod Polishing Cloths 53Caswell Plating Manual 29CD & Plastic Polishing Kit 85Ceramic Heaters 83CermaBlue, CermaSSteel, CermaKrome 75CermaWhite 75Chrome Polishing Kit 49Chuck Adapter 54Collinite Automotive Products 88Collinite Marine Products 89COLORGARD 72Cone Felt Bob 51Copper/Chrome Combo Kit 35Copper Plating Kit 19Copy Cad™ & Zinc Plating Kit 16Copy Chrome™/ Flash Copper™ Combo Kit 34Copy Chrome™ Plating Kit 15Curing Lamps 9Cushion Buffs 47Cyclone Blasting Equipment 76 - 81Cylinder Felt Bobs 51

D

Die Cast Model Plating Kit 38Die Grinder & Kit 107Digital PH Tester 45Dome Felt Bob 51

E

Electroless Krome™ Plating Kit 24Electroless Nickel Plating Kit 21Engine Oil Additives 74Epoxy Putty Sticks 97Etch-O-Matic 68Expander Sanding Wheel 53Extra Long Shaft Extenders 54

F

Facer Buffs 48FastGold Brush Plating 26Felt Bobs 51

Filtering Products 83Finger Buff 48Flap Wheels 50Flash Copper™ Plating Kit 18Flexible Shaft Grinder 103FLITZ™ 90Flitz Polishing Ball 53Foundry In Miniature 102

G

Garage Floor Coating System 36Gas Tank Sealer 92Glass Polishing Kit 107Glow In The Dark Additive 2Glyptal 71Gold Tank Plating 27Grinder/Buffer Adapter 54

H

Hard Chrome Plating Kit 31Hourglass Buff 47

I

Industrial Flexible Shafts 103Internal Engine Coatings 73Iron Phosphate Powder Coating Primer 8IR Thermometer 6

L

Lab-Metal 98Large Felt Bob Kit 51LCD Aluminum Anodizing Kit 12Lead Free Solder 25Liquid Polishes 96Loose Cotton Wheels 46

M

Mask-It Masking Agent 37Metal Finishing Solutions 108Microfiber Cloths 53Mushroom Buffs 48

N

Nickel/Chrome Combo Kit 34Nickel/Copper Combo Kit 33Nickel/ Flash Copper™ Combo Kit 33Nickel Plating Kit 11No Touch Products 121

O

Olive Drab Chromate 17Option Arbor System 105Order Form 122

P

Perma-Coil Thread Repair Inserts 87Perma-Coil Thread Repair Kits 86Permatex Cleaners 109Permatex Gasket Makers 111Permatex Gasket Remover 110Permatex Lubricants 114Permatex Repair Products 117Permatex Retaining Compounds 113Permatex Sealants 115Permatex Super Glue 110Permatex Threadlockers 112Pickle #4 40Pitstop™ 52Plasti Dip 69Plating Combo Kits 33Plating Hardware 42Plating Rectifiers 39Plug N’ Plate™ Kits 22, 23Plum-Loy Solder Paste 101Powder Coating Additives 6Powder Coating Colors 4, 5Powder Coating Color Chart 1, 2Powder Coating Starter Kit 8

Powder Coating System 3Powder Coating Thickness Gauge 6Pressure Blaster 71Pyro Putty 102

Q

Quick Lock Mini Sanding Disks 94Quick Lock Surface Prep Disks 95

R

Replenishment Chemicals 41Reverse Osmosis System 45Rust Bullet™ Rust Preventative Paint 99

S

Sales Terms 123Sandblasting Cabinet 71Sanding Drums 93Saw Blade Wax Stick 96Scrubber Wheel 48Sealer Concentrate 37Shaft Extenders 54Shank Mounted Buff 48Silicone Caps, Plugs & Masking Supplies 7Silvaspray™ 44Silverplater 29Silversmith 29Silver Plating Kit 20Sisal Rope Buff 48Sisal Wheels 46Small Plastic Polishing Kit 49Smoke Relief 92Solder-It Products 91Spiral Sewn Cotton Wheels 46Stainless Steel Activator 40Stainless Steel Blackener 43Stainless Steel Polishing Kit 50String Buff 47Suncatcher Plating Kit 38SURFACE PREP & ADDITIVES 41

T

Tapered Buff 47Techo-Weld 101Tin Plating Kit 28Treated Spiral Wheels 46Treated Vented Buffs 46Triple Chrome Plating Kit 1015 Gal Triple Chrome Plating Kit 32Tumbling Media 85

U

Untreated Vented Buffs 47

V

Vented Buffs 46VHT High Temperature Coatings 61, 62VHT Quality Finish Coatings 63, 64, 65VHT Specialty Coatings 66, 67, 68Vibratory Tumblers 84

W

Wet & Dry Paper 106Wheel Chroming Kit 24Wheel Rake 47WHITE LIQUID ROUGE 96

Y

Yellow Chromate 17

Z

Zincate 37Zinc & Copy Cad™ Blackener 17Zinc Plating Kit 16ZoopSeal™ 42

2004s web cat

Documents