weaver · 2018-09-24 · 179 multiple spindle drill machine 180 switches, motors & shaper...
TRANSCRIPT
AVERWE
MANUFACTURED IN U.S.A.
Copyright © 2018 all Rights Reserved - 1 -
Fax 1-913-831-2974www.weaver-company.com
Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa CALL TOLL FREE 1-800-255-6214Phone 1-913-831-1800
DependableMADE IN the U.S.A.
Complete -with Self-Centering Jigs, Patterns and Industrial
Shaper Cutters
Powerful MotorsSolid Spindles,
heavy tops steel frames.
For 2nd Power Feeder add $2,995
Three Shaper Cabinet Door System with Air Tenon, Power Feeder, Cutters, Crown Jigs & Patterns, etc:
3 Phase System $26,3951 Phase System $26,995
CALL FOR QUOTE ON YOUR CUSTOM SYSTEM NEEDS!
With your Weaver System you will receive a PRE SETUP SYSTEM AND DOOR SAMPLES produced by the system.
Sawblades Ball Bearing Rub Collars Warning DiscsPages 181 Pages 136 Pages 137
Cabinet Door Shaper Systems - Pages 7-41
Cabinet & House Door Systems, Equipment & Tooling“put the best to work in your Shop”
catalog May 2018
Flat Mount Crown & Straight Panel Raising SetupPage 150
Flat Mounting Raised Panel Hold down
Flat Mounting
Dust Sheild
Crown Panel Raising
Straight Panel Raising
Flat Mounting Raised
Panel Guides
Shaper Essentials™for Weaver Shapers Pages 52-79, Flat Mount Pages 139-161
Machine a crown raiseD panel Door . . .
FAST
02:52minutes seconds
House Door Shaper SystemsPages 43-51
Cabinet Door Shaper Systems Pages 6-41
Variable SpeedBelt Power Feeder
Pages 164
Edge Sander Pages 178
Multiple Spindle Drill Machine Pages 179
Air Tenon Jigs Pages 5Coping Hold
Down Page 166
Air Crown Door Jigs & Patterns Pages 170-177
Shaper Cutters Pages 80-135
Cabinet Door Shaper Systems Pages 7-41
House Door Shaper Systems Pages 43-51
Crown Rail & Panel PatternsCrown Rail Jig
Crown Panel Jig
Manual Crown Door Jigs & Patterns Pages 168-169
2 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 2 - Copyright © 2018 all Rights Reserved
Cover Cabinet Door 3 Shaper System for Crown Raised Panel Doors
2 Table of Contents4 Edge Sander, Air Crown Jigs & Patterns, Multiple Spindle Drills, Manual Crown Panel & Rail Jigs and Patterns5 Air Tenon Jigs 6 Weaver Variable Speed Power Feeder
9 Shaper Systems Table of ContentsCabinet Door Shaper Systems
6 Crown Raised Panel Shaper, 2 Shaper Shaker Cabinet Door System,6 2 Shaper Glass Mullion Cabinet Door System 7 3 Shaper Cabinet Door 5/8” Panel - Brazed Tip Tooling8 6 Shaper Cabinet Door 5/8” Panel - Insert Tooling
10 12 Shaper Cabinet Door 3/4” Panel - Brazed Tip Tooling12 9 Shaper Cabinet Door 3/4” Panel - Brazed Tip Tooling 14 3 Shaper Cabinet Door 3/4” Panel - Brazed/Insert Tooling 18 2 Shaper Glass Mullion Cabinet Door 19 6 Shaper Cabinet Door 3/4” Panel - Brazed/Insert Tooling 26 1 Shaper Door Edge Shaper - Brazed Tooling - Continuous27 1 Shaper Door Edge Shaper - Insert Tooling 28 2 Shaper Shaker Cabinet Door Frame - Insert Tooling
52 Shaper Essentials for Weaver Shapers Table of Contents53 Crown Panel Trimming ...........Manual Panel Jig 54 ................................................Manual Coping Jig -Continuous Fence - Trim Table55 ................................................Air Tenon Jig - Continuous Fence - Trim Table56 ................................................Coping Hold Down - Split Fence57 ................................................Air Tenon Jig - Split Fence - Trim Table 58 Tenon ......................................Coping Hold Down - Continuous Fence59 ................................................Air Tenon Jig - Continuous Fence 60 ................................................Coping Hold Down - Split Fence 61 ................................................Air Tenon Jig - Split Fence 62 Stile & Rail Sticking ................Sticker Plate with Hold Down 63 ................................................Sticker Plate & Power Feeder 64 ................................................Crown Rail Sticking - Manual Setup 66 ................................................Sticker Guide & Fence with Hold Down67 ................................................Sticker Guide & Fence with Power Feeder
68 Panel Raising .............................Single Raise with Hold Down 69 ...................................................Single Raise with Hold Down & Power Feeder70 ...................................................Partial Offset with Hold Down 71 ...................................................Partial Offset with Hold Down & Power Feeder72 Crown Rail &Panel Trimming....Shapermaster™ Air Jig - Dead Collar73 ...................................................Shapermaster™ Air Jig - Bearing 74 Crown Panel Raising .................Shapermaster™ Air Jig - Dead Collar75 ...................................................Shapermaster™ Air Jig - Bearing 76 Crown Rail Sticking ...................Shapermaster™ Air Jig - Dead Collar77 ...................................................Shapermaster™ Air Jig - Bearing 78 Door Edge .................................Continuous Fence 79 ...................................................Split Fence
Table of ContentsWeaver Catalog - May 2018
Page 1 of 2
80 Shaper Cutters Table of Contents81 Raised Panel Cutters .................... 5/8” Single Raise or 3/4” with Partial Back Raise - Freeborn82 ...................................................... 3/4” Panels, 1/2” Panels - Freeborn83 ...................................................... 5/8” Panels Single Raise or 3/4” with Partial Back Raise - Insert Heads/Tips- Freeborn84 ...................................................... 3/4” Panels - Insert Heads/Tips- Freeborn85 ...................................................... 5/8” Single Raise or 3/4” with Partial Back Raise - Byrd86 ...................................................... 5/8” Panels Single Raise or 3/4” with Partial Back Raise87 ...................................................... Shaker Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Freeborn88 ...................................................... Shaker Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Byrd
87 Cabinet Door Stile & Rail Sets ..... Shaker Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Freeborn88 ...................................................... Shaker Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Byrd 89 ...................................................... Cabinet Door Sets - Easement - Byrd 90 ...................................................... Cabinet Door Glass Sets - Easement - Byrd 91 ...................................................... Shaker Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Byrd 92 ...................................................... Cabinet Door Sets - Easement - Freeborn93 ...................................................... Cabinet Door Sets - Freeborn 94 ...................................................... Cabinet Door Sets - Easement Brazed Tenon/Insert Stile - Freeborn 95 ...................................................... Cabinet Door Sets - Brazed Tenon/Insert Stile - Freeborn 96 ...................................................... Cabinet Door Sets - Easement Insert Cutters - Freeborn97 ...................................................... Cabinet Door Sets - Insert Cutters - Freeborn98 ...................................................... Cabinet Door Sets - Insert Cutters - Multiple Profile - Eased, Non-Eased- Freeborn99 ...................................................... Cabinet Door Sets - Braised Tip - Easement
100 ...................................................... Cabinet Door Sets - Braised Tip 101 ...................................................... Cope & Pattern, Window Sash - Freeborn
Page
House Door Shaper Systems43 Crown & Square - Solid Panel & Glass Mullions System44 Straight Tenon Shaper46 Straight Sticking Shaper48 Straight Panel Raising Shaper 50 Crown Rail, Panel & Mullion Shaper
30 2 Shaper Shaker Cabinet Door Frame - Brazed Tip Tooling32 1 Shaper Shaker Cabinet Door Frame - Brazed Tip Tooling 34 1 Shaper Shaker Straight Panel Raising 36 1 Shaper Cabinet Door 3/4” Panel - Brazed Tooling -
Coping Hold Down - Power Feeder37 1 Shaper Cabinet Door 3/4” Panel - Insert Tooling -
Air Tenon Jig - Power Feeder
- 3 -
Fax 1-913-831-2974
www.weaver-company.com
Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
May 2018 - 3
CALL TOLL FREE 1-800-255-6214Phone 1-913-831-1800 Copyright © 2018 all Rights Reserved
Table of ContentsWeaver Catalog - May 2018
Page 2 of 2
163 Power Feeder Belts 163 Power Feeder Roller to Belt Conversion Kits, Power Feeder Rollers 164 Power Feeder
165 Steel Sticker Setup Plate 166 Air Tenon Fixture, Manual Coping Hold Down
168 Crown Door Jigs & Patterns 168 Crown Door Jigs - Manual 170 Crown Door Patterns (Wood) 171 Shapermaster - 24” Air Rail & Panel Jigs & Patterns 174 Shapermaster - 19” Air Rail & Panel Jigs & Patterns 176 Shapermaster - 32” Air Rail & Panel Jigs & Patterns
178 Edge Sander 179 Multiple Spindle Drill Machine 180 Switches, Motors & Shaper Mandrels
181 Sawblades
182 Back Cover: 2 Shaper Crown Glass Mullion Cabinet Door System, Shapermaster Air Jigs & Patterns,Manual Jigs & Patterns, Power Feeder, Air Tenon Jigs.
Page Shaper Cutters (cont.)
112 House Door Stile & Rail Sets ......... 1-3/8”-1-3/4” Stock - Freeborn 114 ....................................................... 2-1/4” Stock - Freeborn 116 ....................................................... 1-3/8”-1-3/4” Glass - Freeborn 118 ....................................................... 2-1/4” Glass - Freeborn 120 Raised Panel Cutters .................... Stehle “While Supplies Last!” 122 Square Edge Cutters ..................... Stehle “While Supplies Last!” 123 Square Edge & Bevel Cutters ....... Stehle “While Supplies Last!” 124 Drawer Cutters .............................. Stehle “While Supplies Last!” 125 Detail Cutters ................................ Stehle “While Supplies Last!” 126 V-Panelling Cutters ........................ Stehle “While Supplies Last!” 127 Convex Half Round Cutters ........... Stehle “While Supplies Last!” 128 Concave Half Round Cutters ........ Stehle “While Supplies Last!”
102 Door Edge Cutters ..........................Profiles - Byrd 103 ........................................................Profiles - Freeborn 107 Door Edge Detail, Reversible .........Profiles - Freeborn 108 Rounds & Groovers ........................Profiles - Freeborn 109 Easing Sets .....................................Profiles - Freeborn 110 Glue Joint, Flooring ........................Profiles - Freeborn
129 Multiform Deluxe Slip Stone .......... 130 Convex Quarter Round Cutters ..... Stehle “While Supplies Last!” 131 Concave Quarter Round Cutters .. Stehle “While Supplies Last!” 132 3/4” Bore 2 Wing Cutters .............. Stehle “While Supplies Last!”
133 HSS House Door Cutters .............. Stehle “While Supplies Last!” 134 Molding Cutters ............................ Stehle “While Supplies Last!”
136 Cutter Accessories ........................ Ball Bearing Rub Collars, Warning Disc, Spacers, Shims
138 ...................................................... T-Bushings, Spacers, Shims
150 Panel Raising ................................ Single Raise Hold Down 151 ...................................................... Single Raise Hold Down & Power Feeder 152 ...................................................... Partial Offset Hold Down 153 ...................................................... Partial Offset Hold Down & Power Feeder 154 Crown Rail & Panel Trimming ....... Shapermaster™ Air Jig - Dead Collar 155 ...................................................... Shapermaster™ Air Jig - Bearing 156 Crown Panel Raising .................... Shapermaster™ Air Jig - Dead Collar 157 ...................................................... Shapermaster™ Air Jig - Bearing 158 Crown Rail Sticking ....................... Shapermaster™ Air Jig - Dead Collar 159 ...................................................... Shapermaster™ Air Jig - Bearing 160 Door Edge ..................................... Continuous Fence 161 ...................................................... Split Fence
139 Shaper Essentials Flat Mount Table of Contents 140 Tenon ............................................ Coping Hold Down - Continuous Fence 141 ...................................................... Air Tenon Jig - Continuous Fence 142 ...................................................... Coping Hold Down - Split Fence 143 ...................................................... Air Tenon Jig - Split Fence 144 Stile & Rail Sticking ....................... Sticker Plate with Hold Down 145 ...................................................... Sticker Plate & Power Feeder 146 ...................................................... Crown Rail Sticking - Manual Setup 147 ...................................................... Sticker Guide & Fence with Hold Down 148 ...................................................... Sticker Guide & Fence with Power Feeder 149 Crown Panel Trimming .................. Manual Jig
Page Shaper Cutters (cont.)
House Door Shaper Systems43 Crown & Square - Solid Panel & Glass Mullions System44 Straight Tenon Shaper46 Straight Sticking Shaper48 Straight Panel Raising Shaper 50 Crown Rail, Panel & Mullion Shaper
30 2 Shaper Shaker Cabinet Door Frame - Brazed Tip Tooling32 1 Shaper Shaker Cabinet Door Frame - Brazed Tip Tooling34 1 Shaper Shaker Straight Panel Raising36 1 Shaper Cabinet Door 3/4” Panel - Brazed Tooling -
Coping Hold Down - Power Feeder37 1 Shaper Cabinet Door 3/4” Panel - Insert Tooling -
Air Tenon Jig - Power Feeder
“Gives Your Company The Edge It Needs”
DependableMADE IN the
U.S.A.Drive Wheel & Table Wheel are set back of Platen - any length of mate-
rial can be sanded
EDGE SANDER
(4” Dust Chute)
Baldor Motors
Magnetic Starter Switch
Steel Platen6” wide, 48” long
straight & flat
The table adjusts easily with a simple turn of the crank, allowing the use of the entire width of the sanding belt
Quick Action Release Makes Changing the
belts fast - Belt aligning is
quickly made by adjusting the knob lo-
cated on top of the machine.
Edge SandersItem No. Description Price
ES1753 5 HP, 3 Ph. $8,495 ES1751 5 HP, 1 Ph. $8,995
ESXSP180 180 Grit $18 ESXSP120 120 Grit $18 ESXSP100 100 Grit $20 ESXSP080 80 Grit $20 ESXSP060 60 Grit $22 ESXSP036 36 Grit $22
(6” width x 120” length - Cloth Backing)
Edge Sander Belts
Solid table l a m i n a t e d h a r d w o o d6 feet long
Welded steel frame - rigid construction
A C C U R A T E - E F F O R T L E S S
A i r J i g s r i d e s o n a n a t h i n c u s h i o n o f a i r !
Opening Item No. Price
24” AJ2402 $1,995
CROWN RAIL & PANEL JIGSHAPERMASTER
24” Opening Work with Stock up to
21/4” Thick
MADE IN the U.S.A.
10 Styles Available!
PLEXIGLASS RAIL & PANEL PATTERN SETS
Pattern Set Shown:
#PA2417 $365
For use with Shapermaster Air Crown Rail & Panel JigsTM
Built In Rack & Pinion Center-ing Device
Pneumatic Clamps & Air Ride
C R O W N D O O R J I G S A R E F A S T E RJust imagine, with these SELF-CENTERING JIGS you will not have to try to divide 177/16” by 2 or 1115/16” by 2 or 95/16” by 2, and so on.
These jigs will also cut in half the number of times your employees will have to use their ruler saving you untold hours of time spent measuring and doing arithmetic. Now you and your employees can spend more time actually producing crown raised panel doors.
Wide Selection of Popular Patterns Available!
CROWN RAIL JIGS This jig features a built-in rack & pinion gear centering device for top Rail.
MADE IN the U.S.A.
Table glides on ball bearing rollers
Steel Gears
MADE IN the U.S.A.
Adjustable table depth stops fordifferent cabinet widths.
11 S
pindle
s
2” B
etwee
n Cen
ters
Welded steel frame - rigid construction
Fast, Efficient,Simple to operate!
Multiple Spindle Drill For Adjustable Shelving
Spring loaded index pins for quick line boring
Adjustable Depth Guage - drills uniform depth regardless of the thickness of the material
Drill two rows of eleven holes in your material 2” wide to 26” wide and any length material in 10 seconds
Rolling table for parallel drilling . . .YOU DON’T HAVE TO TURN THE MATERIAL END-TO-END
1/4” or 5mm brad point drill bits
included.
Item No. Description
DM1172 1 HP, 1 PH, 72” Table DM1372 1 HP, 3 PH, 72” Table DM1142 1 HP, 1 PH, 42” Table DM1342 1 HP, 3 PH, 42” Table
Price
$11995$11895$11945$11845
CROWN PANEL JIGSThis jig features a built-inrack & pinion gear centeringdevice for crown panels.
CROWN RAIL PATTERN SET (PA427 $265 Shown) CROWN PANEL PATTERN SET (PA417 $265 Shown)
(42” Table shown - 72” also available)
CROWN PANEL & RAIL JIGS & PATTERNSJM330 Crown Rail Jig $465 JM310 Crown Panel Jig $495
TM
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Fax 1-913-831-2974Phone 1-913-831-18004 - May 2018 - 4 - Copyright © 2018 all Rights Reserved
May 2018 - 5
Catalog May 2018
These jigs will also cut in half the number of times your employees will have to use their ruler saving you untold hours of time spent measuring and doing arith-metic. Now you and your employees can spend more time actually producing crown raised panel doors.
EXTENDED HOURS - We come in early and stay late to accomodate both the East and West coast, so you can call now.
TOLL FREE NUMBER - Call 1-800-255-6214 with your order or question for customer service - our staff is eagerly waiting to help you. We arehere most Saturdays.
QUICK DELIVERY - Many items are in stock. We ship ground UPS and large items are shipped via motor freight. Next Day Air and Priority Mail 2nd Day Air UPS is available.
CUSTOM SERVICE - For your custom ball bearing rub collars, custom shaper cutters, or custom shaping system, call us today.
FOR YOUR CONVENIENCE
MADE IN the U.S.A.
LIMITED WARRANTY Products sold or manufactured by us have limited warranty of one year from the date of purchase against defects in material and workmanship. No other warranties are implied.
FAX (913) 831-2974 PHONE (913) 831-1800
DVDs AVAILABLE
Weaver Company1108 South 37th Street
Kansas City, KS 66106 U.S.A.
1-800-255-6214
AJ1201RW 12” Air Tenon Jig “right”, counter clockwise cutter rotation.
AJ1201LW 12” Air Tenon Jig “left”, clockwise cutter rotation.
AJ1801RW 18” Air Tenon Jig “right”, counter clockwise cutter rotation.
AJ1801LW 18” Air Tenon Jig “left”, clockwise cutter rotation.
WARNING - The Equipment and Tooling in this literature can be dangerous.
ALWAYS - Be sure to follow these safety rules and all other general shop safety procedures plus your local, state and national safety standards when using the equipment and tooling in this literature.
ALWAYS - Keep hands so they cannot be pulled or pushed into cutters.ALWAYS - Wear safety glasses.
ALWAYS - Keep all cutters completely covered with proper holddowns, fences, warning discs and Dust Shields.
NOTE: In some of our pictures and illustrations the warning discs, Dust Shields and some accessories have been removed for better illustration of the cutter and work.
THESE JIGS RIDE IN A STANDARD 3/8” x 3/4” GROOVEIN YOUR SHAPER’S TOP.
Air Tenon Fixtures:
AJ1201LW 12” Wide “Left” $ 1,195AJ1201RW 12” Wide “Right” $ 1,195
AIR TENON FIXTUREThe Air Tenon Fixture comes in 4 models. Air Jigs ride on a thin cushion of air!
ACCURATE - EFFORTLESS
01LWAJ18 18” Wide “Left” $ ,750101RWAJ18 18” Wide “Right” $ ,7501
WEAVER WEAVER
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 5 - Copyright © 2018 all Rights Reserved
© 2018 Weaver CompanyAll rights reserved.
Reproduction in whole or part prohibited. Prices subject to change without notice
LLAME A U.S.A. POR COBRAR AL 1-800-255-6214NUESTRO PERSONAL HABLA ESPANOL,
ESTAMOS PARA SERVIRLE
6 - May 2018
World Renowned Quality
1-800-255-6214Weaver Company
(Copyright c 2018 Weaver Company All Rights Reserved)1108 South 37th Street - Kansas City, 66106
. . . Shaper Systems, Cutters, Shaper Essentials, Saw Blades, Power Feeders . . .
Weaver Company - 1108 South 37th Street - Kansas City, Kansas 66106-2028
SHAPING MACHINERY & TOOLING FOR YOUR SHOP!
Call Toll Free 1-800-255-6214
Stile & Rail Cut-ter Set
VARIABLE SPEED BELT
POWER FEEDERS
2 SHAPER SHAKER CABINET DOOR SYSTEM FOR $17,995
For your Shaping Needs
Industry Leading Quality & Production made Affordable
CROWN RAISED PANEL SHAPER FOR $6,595
RAISED PANEL HOLD DOWN, GUIDES, BALL BEARING RUB COLLAR
STEEL STICKER
PLATE
AIR TENON JIG
TENON FENCE
Raised Panel Cutter
SHAPER WRENCHES
SHAPER WRENCHES
(Other Profiles Available)
$19,995
GLASS MULLION CABINET DOOR SHAPER SYSTEM
for the frame, divided light & grille mullions ...
1 Phase System $19,9553 Phase System $19,795
SH1316 Shaper 3HP (1-1/4” Spindle 28” x 20” Top)
Weaver Belt Power Feeder
TenonFence
DustShield
Air Tenon Fixture
Sticking Setup For Frame & Mullions
SH1316 Shaper 3HP (1-1/4” Spindle 28” x 20” Top)
Crown Rail Jig
2 Shaper Glass Mullions Cabinet Door System with Air Tenon Jig, Power Feeder, Cutters and accessories to produce square and crown glass cabinet doors with grille and true divided light mullions.
Crown Rail Patterns
AIR TENON FIXTUREOpening 117/8” Wide, Work with Stock up to
21/4” Thick
Air Tenon Fixture#AJ1201RW $1,195
RIDES IN STANDARD 3/8” x 3/4” GROOVE IN SHAPER TOP
MADE IN the U.S.A.
Shaper Wrenches
Dead CollarVariable Speed for running different types of material and depth of cut
Item No. Description Price PF721W Weaver Double Bond $2,995 Belt Power Feeder
INDUSTRIAL MACHINE ECONOMICALLY PRICED!
VARIABLE SPEED BELT POWER FEEDERHinged for quick removal - Easily lifted out of the way to use jig, shaper or change cutters
Continuous Duty
MADE IN THE U.S.A.
Works Anywhere 110 Volts
300-lb. Torque Motor
Angle of belts are easily adjusted - feed stock into fence or away from fence.
(Running 3/8” material for Grilles)
CALL TOLL FREECatalog May 2014
Weaver Company 1108 South 37th Street
Kansas City, KS 66106-2028
Catalog May 2018
Crown Raised Panel Cabinet and House Door Systems, Equipment & Tooling
QUICK: Be able to come up with add-on orders or replace any doors needed in the installation of a kitchen . . .
EFFICIENT: Producing custom sizes, types of wood, raise panel, finished ends, island cabinets, and door designs using convenient and accurate jigs and patterns . . .
COMPLETE: The job - move those cabinets out of the shop as you can make the doors and panels you need to finish!
make your production simpler . . .
Wide Selection of Pattern Styles Available Finished Ends, Wainscotting & more virtually any length
WEAVER DOOR SYSTEMS
DependableMADE IN the U.S.A.
Complete -with Self-Centering Jigs, Patterns and Industrial
Shaper Cutters
Strong -1-1/4” Spindles, cast iron, heavy ribbed tops, welded
steel frames.
Powerful -Continuous Duty
Baldor Motors
For 2nd Power Feeder add $2,995
Three Shaper Cabinet Door System with Air Tenon, Power Feeder, Cutters, Crown Jigs & Patterns, etc:
3 Phase System 1 Phase System
$26,495$26,995
3 Shaper Cabinet Door System
$26,495
CALL FOR QUOTE ON YOUR CUSTOM SYSTEM NEEDS!
THIS SYSTEM COMES COMPLETE WITH:
PLUS Dust Hoods, Rub Collars, Fences, Sticking Setup, & other essentials for machining Crown Raised Panel Cabinet Doors!
3 - Weaver Heavy Duty Industrial Shapers
Air Tenon Fixture
Weaver Variable Speed Belt power Feeder
Raised Panel Hold Down
Cutters: Raised Panel, Stile & Rail Sets, Panel Trimming
Crown Rail JigCrown Panel Jig
Crown Rail, Crown Panel Hardwood
Pattern Sets
With your Weaver System you will receive a PRE SETUP SYSTEM AND DOOR SAMPLES produced by the system.
3 Shaper Cabinet Door System
Note: In some of our pictures and illustrations the safety covers, dust hoods and some accessories have
been removed for better illustration of the cutter and work.
(Other Profiles Available)
Phone 1-913-831-1800 - Fax 1-913-831-2974 weaver-company.com
(Copyright c 2018 Weaver Company All Rights Reserved)1-800-255-6214
CALL TOLL FREE
Machine a crown raiseD panel Door . . .
FAST
02:52minutes seconds
Crown Raised Panel Cabinet Door Systems, Equipment & Tooling
May 2018 - 7
Weaver Company
INDUSTRIAL MACHINE ECONOMICALLY PRICED!
6 SHAPER CABINET DOOR SYSTEM
CALL FOR QUOTE ON YOUR CUSTOM SYSTEM NEEDS!
Strong - spindles,
heavy tops, welded steel frames.
Dependable
Machine a crown raiseD panel Door . . .
FAST
Minutes Seconds02:52
6 Shaper Cabinet Door System with Air Tenon Jig, 2 Air Crown Jigs, 2 Power Feeders, Cutters & Patterns, etc:
3 Phase System $57,4951 Phase System $58,995
MADE IN the U.S.A.
6-Shaper Cabinet Door System $57,495
Powerful -Continuous Duty
Motors
Complete -with Self-Centering Jigs,Patterns and Industrial
Shaper Cutters
Cutters: Raised Panel, Stile & Rail Sets, Rail & Panel Trimming
(Other Profiles Available)
Phone 1-913-831-1800 - Fax 1-913-831-2974 weaver-company.comWeaver Company
1108 South 37th StreetKansas City, KS 66106-2028 1-800-255-6214
CALL TOLL FREE
Note: In some of our pictures and illustrations the safety covers, dust hoods and some accessories have been removed for better illustration of the cutter and work.
DeDicaTeD . . .TenoninG
sTile & rail sTicKinG
crown railsTicKinG
crown panel raisinG
sTraiGhT panel raisinG
crown rail & panelTriMMinG
6 shaper cabineT Door sysTeM
With your Weaver System you will receive a PRE SETUP SYSTEM AND DOOR SAMPLES produced by the system.
weaver-company.com
6 Weaver Heavy Duty Industrial Shapers (3 Standard, 3 Large Top)
PLUS Hold Downs, Dust Hoods, Rub Collars, Fences, Sticking Setup, & other accessories for machining Crown Raised Panel Cabinet Doors
THIS SYSTEM COMES COMPLETE WITH:
Air Tenon Fixture 2 Air Crown Rail & Panel Jigs
Plexiglass Rail & Panel Patterns
2 Weaver Variable Speed Belt power Feeders
Raised Panel Hold Down
(Copyright c 2018 Weaver Company All Rights Reserved)8 - May 2018
6-Shaper Cabinet Door System $38,109
May 2018 - 9
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 9 - Copyright © 2018 all Rights Reserved
WEAVERShaper Systems Table of Contents
Price ($)
Page Cabinet Door Shaper Systems 1 Phase 3 Phase
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
,
. ,
50
Crown Rail, Panel & Mullion Shaper
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
18,915
.
13,961
Price ($)
Page House Door Shaper Systems 1 Phase 3 Phase
43 4 Shaper Crown & Square - Solid Panel & Glass Mullions System . . . . . . . . . . . 59,292 . 57,718 44 Straight Tenon Shaper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12,261 . 11,861 46 Straight Sticking Shaper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13,881 . 13,481 48 Straight Panel Raising Shaper 14 235 13 484
1 3 Shaper Cabinet Door 5/8” Panel - Brazed Tip Tooling . . . . . . . . . . . . . . . . . . . 26,995 . 26,395 6 1 Shaper Panel Raising System. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6,995 . . 6,595 6 2 Shaper Shaker Cabinet Door Frame Shaper System . . . . . . . . . . . . . . . . . . . . 17,995 . 17,795 6 2 Shaper Crown Glass Mullion Cabinet Door Shaper System . . . . . . . . . . . . . . . 19,995 . 19,795 7 3 Shaper Cabinet Door 5/8” Panel - Brazed Tip Tooling . . . . . . . . . . . . . . . . . . . . 26,995 . 26,495 8 6 Shaper Cabinet Door 5/8” Panel - Insert Tooling . . . . . . . . . . . . . . . . . . . . . . . . 58,995 . 57,495
10 12 Shaper Cabinet Door 3/4” Panel - Brazed Tip Tooling . . . . . . . . . . . . . . . . . . 118,48 .0 116,38012 9 Shaper Cabinet Door 3/4” Panel - Brazed Tip Tooling . . . . . . . . . . . . . . . . . . . . 79,660 . 78,460 14 3 Shaper Cabinet Door 3/4” Panel - Brazed/Insert Tooling . . . . . . . . . . . . . . . . . . 31,995 . 31,395 18 2 Shaper Glass Mullion Cabinet Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19,995 . 19,795 19 6 Shaper Cabinet Door 3/4” Panel - Brazed/Insert Tooling . . . . . . . . . . . . . . . . . . 59,495 . 57,995 26 1 Shaper Door Edge Shaper - Insert Tooling. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9,000 . . 8,900 27 1 Shaper Door Edge - Insert Tooling . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . .9,000 . . 8,950 28 2 Shaper Shaker Cabinet Door Frame - Insert Tooling . . . . . . . . . . . . . . . . . . . . . 17,995 . 17,795 30 2 Shaper Shaker Cabinet Door Frame - Brazed Tip Tooling . . . . . . . . . . . . . . .. . 12,995. 12,79532 1 Shaper Shaker Cabinet Door Frame - Brazed Tip Tooling . . . . . . . . . . . . . . . . . . 7,695 . . 7,595 34 1 Shaper Shaker Straight Panel Raising . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6,495 . . 6,395 36 1 Shaper Cabinet Door 3/4” Panel - Brazed Tooling - Coping Hold Down. . . . . . 15,595 . 15,195 37 1 Shaper Cabinet Door 5/8” Panel - Insert Tip Tooling - Air Tenon . . . . . . . . . . . . 16,395 . 15,995 38 1 Shaper Cabinet Door 5/8” Panel Brazed Coping - Hold Down . . . . . . . 12,595 . 12,195
182 2 Shaper Glass Mullion Cabinet Door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19,995 . 19,795
10 - May 2018
Weaver Company 1108 South 37th Street
Kansas City, KS 66106-2028
Phone 1-913-831-1800 - Fax 1-913-831-2974 weaver-company.com
(Copyright c 2018 Weaver Company All Rights Reserved)
#1201 #1202
#1203 #1204
#1206
#1212#1211
#1209 #1210
TENONING
The Air Tenon Jig secures the rail with pneumatic clamp and glides on an ultra thin cushion of air making the operation effortless.
STILE AND RAIL STICKING
This Sticking set up sizes material at the same time it is being shaped. It cuts consistantly and easily
SHAKER STRAIGHT STICKING
SHAKER STRAIGHT PANEL RAISING
Power Feeding panels with Hold Down & guides makes raising panels accurate & easy.
SHAKER TENONING
The Air Tenon Jig secures the rail with air clamp on a thin cushion of air for an effortless operation.
STRAIGHT PANEL RAISING
1
3
9
2
11
CROWN PANEL RAISING6
12 DOOR EDGE
Weaver’s 12 Shaper System Gives You These Capabilities:
CROWN RAIL STICKING
This will shape the crown rail as the pattern follows the rub collar. The operation is made easier by the Jig gliding on a thin cushion of air.
4
This Sticking set up sizes material at the same time it is being shaped. It cuts consistantly and easily.
With the Fence, Hold Down and Drawer Front Jig, this is an excellent Door & Drawer edge shaping operation.
Power Feeding panels with Hold Down & guides makes raising panels accurate & easy.
#1205CROWN RAIL & PANEL TRIMMING
This trims crown rail & panelas the pattern follows the rub collar.
5
The operation is made easier by the Jig gliding on a thin cushion of air. #1207GLASS TENONING
The Air Tenon Jig secures the rail with pneumatic clamp and glides on an ultra thin cushion of air making the operation effortless.
7
1-800-255-6214CALL TOLL FREE
#1208
This Sticking set up sizes material at the same time it is being shaped. It cuts consistantly and easily.
GLASS STRAIGHT STICKING8(3/8” material for Grilles)
CROWN RAISED PANEL GLASS MULLIONS SHAKER PANEL DOOR EDGE
This will raise the crown as the panelpattern follows the rub collar. The operation is made easier by the Jig gliding on a thin cushion of air.
10
May 2018 - 11
Phone 1-913-831-1800 - Fax 1-913-831-2974 weaver-company.com
Weaver Company 1108 South 37th Street
Kansas City, KS 66106-2028
Rail Cutter
1-800-255-6214CALL TOLL FREE
CROWN RAIL STICKING
CROWN RAIL & PANEL TRIMMING
Shaper 3HP1-1/4” Spindle
20”x28” top, Table Top Groove
Tenon Fence
Dust Shield
Stile & Rail Cut-ters - Rail Half
Air Tenon Jig
Warning Disc
Shaper 3HP1-1/4” Spindle 20”x 28” top.
Warning Disc
Stile & Rail Cutters - Stile Half
Dust Shield
Power Feeder
Sticker Spring Guide & Fence
6
TENONING
1STILE AND RAIL
STICKING
2
STRAIGHT PANEL RAISING
3 4 5
12 Shaper Crown Raised Panel, Glass & Shaker Cabinet Door System with Door Edge $116,380 6 Shaper Crown Raised Panel
Cabinet Door System $57,995
Shaper 5 HP1-1/4” Spindle
28”x40” top
Warning Disc
Dust Shield
Stacked Square Edge Cutter
Plexiglass Rail Patterns
Dead Collar
Lead Fence
Plexiglass Panel Patterns
#1206#1205#1204#1203#1202#1201
CROWN RAIL & PANEL TRIMMING
4
CROWN PANEL RAISING
5 #1205
CROWN RAIL STICKING
6#1206
STRAIGHT PANEL RAISING 3#1203
STILE AND RAIL STICKING
2
#1202
TENONING 1#1201
Hold Down
Warning Disc
Dust Shield
Shaper 3 HP1-1/4” Spindle 28” x 40” top
Stile & Rail Cutters - Stile Half
Lead Fence
Shapermaster Rail Jig
Dead Collar
CROWN PANEL RAISING
Shaper 5 HP1-1/4” Spindle
28”x40” top
Shapermaster Panel Jig
Lead Fence
Dust Shield
Raised Panel Cutters w/Partial Under Cuter
Dead Collar
Warning Disc
Shaper 5HP1-1/4” Spindle 20”x28” top.
Power Feeder
Dust Shield
Raised Panel Cutters w/Partial Under Cuter
Raised Panel Guide
Raised Panel Hold Down
Warning Disc
Shaper Wrenches
6 Shaper Crown Raised Panel Cabinet Door System (#1201, 1202, 1203,
1204, 1205, 1206) 2 Shaper Glass Mullion Cabinet Door System (#1207, 1208) 3 Shaper Shaker Cabinet Door System (#1209, 1210, 1211) 1 Door Edge Shaper (#1212) 12 Shaper Crown Raised Panel, Shaker & Glass Cabinet Door System with Door Edge (#1201 thru #1212)
Weaver Door Systems: 1 PhaseSystem
3 PhaseSystem
#1204
(Other Cutter Profiles Available)
2 Shaper Glass Mullion Cabinet
Door System
3 Shaper Shaker Cabinet Door
System $26,695
10SHAKER STILE & RAIL STICKING
SHAKER TENONING
9
12
GLASS TENONING
7GLASS STILE AND
RAIL STICKING
8DOOR EDGE
12
Drawer Front Hold Down
Warning Disc
SHAKER TENONING
9 1110
SHAKER PANEL RAISING
11
SHAKER STRAIGHT PANEL RAISING
SHAKER STRAIGHT STICKING
#1211#1210#1209#1212
#1208#1207
#1209 #1210
Door EdgeShaper$11,895
DOOR EDGE#1212
#1211
GLASS STILE AND RAIL STICKING
8
#1208
7
$19,795GLASSTENONING#1207
Shaper 5 HP1-1/4” Spindle 20”x28” top.
Power Feeder
Dust Shield
Shaker Raised Panel
Raised Panel Guides
Raised Panel Hold Down
Warning Disc
Shaper 3HP1-1/4” Spindle 20”x28” top.
Shaker Stile & Rail Cutters - Stile Half
ShakerSticker Plate
Setup
Dust Shield
Power Feeder
Shaper 3HP1-1/4” Spindle
20”x28” top withTable Top Groove
Tenon Fence
Shaker Stile & Rail Cutters - Rail Half
Air Tenon Jig
Warning Disc Warning Disc
Dust Shield
22” Crown Rail Jig
Tenon Fence
Shaper 3HP1-1/4” Spindle
20”x28” top withTable Top Groove
Dust Shield
Glass Stile & Rail Cutters - Rail Half
Air Tenon Jig
Warning Disc
Shaper 3HP1-1/4” Spindle 20”x28” top.
Warning Disc
Glass Stile & Rail Cutters - Stile Half
Glass Sticker Plate Setup
Dust Shield
Power Feeder
Crown Rail Pat-
terns
Dead Collar
BBRCDead Collar
Shaper 3 HP1-1/4” Spindle 28”x40” top
with table top groove
Power Feeder
Door Edge Fence
Dust Shield
Door Edge Cutters
General Hold Down
With your Weaver System you will receive a PRE
SETUP SYSTEM AND DOOR SAMPLES produced by the
system.
$ 54,495
$ 19,995$ 26,995$ 11,995-------------
$118,480
$ 57,995
$ 19,795$ 26,595$ 11,895-------------
$116,480
(Copyright c 2018 Weaver Company All Rights Reserved)
12 - May 2018
TENONING
The Air Tenon Jig secures the rail with pneumatic clamp and glides on an ultra thin cushion of air making the operation effortless.
1a
SHAKER STRAIGHT PANEL RAISING
The Hold Down, and Guides ensure the work is accurate.
SHAKER TENONING
The Air Tenon Jig secures the rail with air clamp and glides on a thin cushion of air for an effortless operation.
6
8
Weaver’s 9 Shaper System Gives You These Capabilities:
DOOR EDGE
CROWN PANEL TRIMMING
This trims crown panelas the rub collar, follows the pattern.
1b
STILE AND RAIL STICKING
This Sticking set up sizes material at the same time it is being shaped. It cuts consistantly and easily.
2a
#901a #901b
#902b#902a
#903a
#904 #905
#908
#906 #907
This will shape the crown rail as the rub collar, follows the pattern. The operation is made fast and uniform by use of the jig & pattern.
CROWN RAIL STICKING2b
GLASS STRAIGHT STICKING
STRAIGHT PANEL RAISING
With the Fence, Hold Down and Drawer Front Jig, this is an excellent Door & Drawer Edge shaping operation.
9
3a CROWN PANEL RAISING
This Sticking set up sizes material at the same time it is being shaped. It cuts consistantly and easily.
The Air Tenon Jig secures the rail with pneumatic clamp and glides on an ultra thin cushion of air making the operation effortless.
GLASS TENONING4 5(3/8” material for Grilles)
Rub Bearing
1-800-255-6214CALL TOLL FREE
CROWN RAISED PANEL GLASS MULLIONS SHAKER PANEL DOOR EDGE
#903b3b
#909
Phone 1-913-831-1800 - Fax 1-913-831-2974 weaver-company.com
Weaver Company 1108 South 37th Street
Kansas City, KS 66106-2028
SHAKER STRAIGHT STICKING
This Sticking set up sizes material at the same time it is being shaped. It cuts consistantly and easily.
7
(Copyright c 2018 Weaver Company All Rights Reserved)
The Raised Panel Hold Down, Ball Bearing Rub Collar and Guides allow the crown panels to be raised accurately.
Rub BearingRub Bearing
The Hold Down, and Guides ensure the work is accurate.
May 2018 - 13
Phone 1-913-831-1800 - Fax 1-913-831-2974 weaver-company.com
Weaver Company 1108 South 37th Street
Kansas City, KS 66106-2028
STRAIGHT & CROWN STILE AND RAIL STICKING 2a/2b
TENONING & PANEL TRIMMING
1a/1b
3 Shaper Crown Raised PanelCabinet Door System $26,795
9 Shaper Crown Raised Panel, Glass & Shaker Cabinet Door System with Door Edge $78,460
STRAIGHT & CROWN PANEL RAISING
3a/3b
Shaper 3HP1-1/4” Spindle
20”x28” top withTable Top Groove
Tenon Fence
Dust Shield
Stile & Rail Cut-ters - Rail Half
Air Tenon Jig
Warning Disc
#901a#901b
#902a#902b
#903a#903b
Raised Panel Guides
Shaper 5HP1-1/4” Spindle20”x28” top.
Dust Shield
Raised Panel Cutters w/Partial Under Cuter
Raised Panel Hold Down
Warning Disc
Shaper 3HP1-1/4” Spindle20”x28” top.
Warning Disc
Stile & Rail Cutters - Stile Half
Dust Shield
Power Feeder
Sticker Plate Setup
Weaver Door Systems:
3 Shaper Crown Raised Panel Cabinet Door System (#901a/b, #902a/b, #903a/b) 2 Shaper Glass Mullion Cabinet Door System (#904, 905) (for crown, add $382) 3 Shaper Shaker Cabinet Door System (#906,907,908) 1 Door Edge Shaper (#909) 9 Shaper Crown Raised Panel, Shaker & Glass Cabinet Door System with Door Edge (#901a/b thru #909)
1-800-255-6214CALL TOLL FREE
1 PhaseSystem
$ 27,395$ 19,265$ 24,000$ 9,000-------------
$ 79,660
3 PhaseSystem
$ 26,795$ 19,065$ 37,700$ 8,900-------------
$ 78,460
3b3a
#903a #903b
STRAIGHT PANEL RAISING
CROWN PANEL RAISING
STILE AND RAIL STICKING
2a
CROWN RAIL STICKING
2b
#902a #902b
CROWN PANEL TRIMMING
1bTENONING
1a
#901a#901b
Panel Trimming Table
Crown Panel Jig
Crown Panel Patterns
Warning Disc
Panel Trimming Cutter
Dead Collar
Warning Disc
Crown Rail Pat-terns
Dead Collar
Crown Rail Jig
(Other Cutter Profiles Available)
2 Shaper Glass Mullion Cabinet
Door System$19,065
Door EdgeShaper
$8,900
GLASS STILE AND RAIL STICKING
5GLASS TENONING4
3 Shaper Shaker
Cabinet Doors System$23,700
8
SHAKER PANEL RAISING
7SHAKER STICKING
SHAKER TENONING6
DOOR EDGE
9
GLASS TENONING
4GLASS STILE AND
RAIL STICKING
5DOOR EDGE
9
Tenon Fence
Shaper 3HP1-1/4” Spindle
20”x28” top withTable Top Groove
Dust Shield
Glass Stile & Rail Cutters - Rail Half
Air Tenon Jig
Warning Disc
Shaper 3HP1-1/4” Spindle 20”x28” top.
Warning Disc
Glass Stile & Rail Cutters - Stile Half
Glass Sticker Plate Setup
Dust Shield
Power Feeder
SHAKER TENONING
6 87
SHAKER PANEL RAISING
SHAKER STICKING
Sticker Plate Setup
Shaper 5HP1-1/4” Spindle20”x28” top.
Dust Shield
Shaker Raised Panel
Raised Panel Guides
Raised Panel Hold Down
Warning Disc
Shaper 3HP1-1/4” Spindle 20”x28” top.
Shaker Stile & Rail Cutters - Stile Half
Dust Shield
Power Feeder
Shaper 3HP1-1/4” Spindle
20”x28” top withTable Top Groove
Tenon Fence
Dust Shield
Shaker Stile & RailCutters - Rail Half
Air Tenon Jig
Warning Disc Warning Disc Warning Disc
Door Edge Cutters
Door Edge Fence
Dust Shield
Drawer Front Hold Down
#904 #905 #906 #907 #908#909
#909
#908
#906#907#905#904
General Hold Down
Ball Bearing Rub Collar
Dead Collar
(For Crown, Add $730)
Shaper 3 HP1-1/4” Spindle 28”x40” top
with table top groove
With your Weaver System you will receive a PRE
SETUP SYSTEM AND DOOR SAMPLES produced by the
system.
Shaper Wrenches
Ball Bear-ing Rub Collar
(Copyright c 2018 Weaver Company All Rights Reserved)
14 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 14 - Copyright © 2018 all Rights Reserved
Wood - Stile
Wood - Panel
Your system will arrive with the shaper cutters on the shapers already adjusted. All accessories will be adjusted, and most mounted to the shapers. You can start producing shortly after the equipment arrives. Since the system is three separate shapers, you can arrange them in a circle, along a wall, or any location in your shop. You can produce doors with one man or three men - and can efficiently make 100 doors or make just one door without changing setups.
This system uses three machines to make a crown raised panel door, usually consisting of two 3 HP shapers and one 5 HP shaper. Shaper One is setup for tenoning the rails and panel trimming. Shaper Two is setup for running straight stiles and shaping crown rails. Shaper Three is setup for raising crown and straight panels.
Power feeders are included on the stile and panel shapers. The Weaver variable speed belt power feeder gives you the capability to run short rails that are impossible with roller feeders - as well, they improve the ease of sticking and straight panel raising operations. The Weaver Power Feeder is quickly lifted up out of the way so you can do your curved work.
The air tenon jig, fences, sticker plate, raised panel setup, cutters, crown jigs and patterns are also included. Pattern sizes and styles can be interchanged rapidly without the need of a ruler or arithmetic.
MADE IN U.S.A.
3 SHAPER CROWN RAISED PANEL WEAVER
Machine a Crown Raised Panel door in less than 3
minutes - A Square Raised Panel door in
less than 2 minutes.
02:52Minutes Seconds
Manufactured In U.S.A.
CABINET DOOR SYSTEM
IPAGES-SY-3SS-3/4
The system you receive will be preset by a craftsman and shipped to you with sample.
System Price 1 Phase: 3 Phase
$31,995$31,395
With 2 power feeders, air tenon fixture, set of crown door patterns, cutters, fences, jigs and fixtures mounted, adjusted and ready to produce!
Fast
Page 1 of 4
May 2018 - 15
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 15 - Copyright © 2018 all Rights Reserved
Top & Bottom Shaper Wrenches - Warning Discs
3 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 1 of 3
Shaper For Tenon and Panel Trimming (with Alloy Brazed Tip Rail Cutter) Item# Description SH1316 Shaper 3HP (1-1/4” Spindle 20” x 28” Top) SH1X38 Table Groove FREPT-10-010-C-501E 1-1/4” Bore Brazed Tip Rail Cutter Set AJ1201RW Air Tenon Jig FE27 Split Tenon Fence WD4166 Warning Disc 4-1/2” OD x 1-1/4” ID DS442 Dust Shield for Air Tenon & Panel Trimming WR620 Top Wrench WR6180 Bottom Wrench
SH1316 Shaper 3HP (1-1/4” Spindle 20” x 28” Top)with Table Groove
WEAVER
(Alloy Brazed Tip Rail Cutter)
Hinged Table Top
Crown Panel Jig
After tenoning, flip down the FE365 table to trim your panels without changing cutters or spindle height
Panel Trimming
FE365 Hinged Table Top for Trimmer FRE8389 Trimming Cutter 2W Carbide Sq. Edge DC21621 Dead Collar for 4-3/4”SC 2-1/2”ODx2-5/8” JM310-22 Crown Panel Jig 22” Opening PA410-17 Hardwood Patterns 2” Crown - Panel - 17 Pc. WD4166 Warning Disc 4-1/2”ODx1-1/4”ID
Note: In some of our pictures and illustrations the warning discs, Dust
Shields, and some accessories have been removed for better illustration of the
cutter and work.
Page 2 of 4
Shaper 1 of 3 Tenon
Shaper 1 of 3 Crown Panel Trimming
Dead Collar 2-1/2”O.D.Square Edge Cutter
2W Carbide for Panel Trimming
Dust Shield Tenon/Trim
Tenon Fence
Set of 17 Crown Panel PatternsDoor sizes 9½” to 26”
16 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 16 - Copyright © 2018 all Rights Reserved
Shaper for Stile and Rail Sticking (with Alloy Insert Tip Stile Cutter) Straight & Crown Setup Item# Description SH1316 Shaper 3HP (1-1/4” Spindle, 20”x28” top) FREIT-10-010-PE 1-1/4” Bore Stile Head with Insert Tips (3) DC31612 -for-4-3/4”SC - Dead Collar 3-1/2”ODx1-1/2”Tall FE360H Sticker Plate Setup with Hold Down PA420-17 Hardwood Patterns 2” Crown - Rail - 17 Piece JM330-22 Crown Rail Jig 22” Opening PF721W Variable Speed Double Bond Belt Feeder DS445 Dust Shield for Curved & Straight Rail WD4246 Warning Disc 4-3/4” ODx1-1/4”ID
SH1316 Shaper 3HP (1-1/4” Spindle, 20”x28” top)
3 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 2 of 3
Dead Collar
Stile Insert Head & Tips
Shaper 2 of 3 Sticking
WEAVER
Sticking Dust Shield
Shaper 2 of 3 Crown Rail Sticking
Note: In some of our pictures and illustrations the warning discs,
Dust Shields, and some accesso-ries have been removed for better illustration of the cutter and work.
Weaver Belt Power Feeder
Flat Mount General Hold Down - Included
w/Sticker Plate
Sticker Guide Fence
Outfeed Fence in line with cutters Sticker
Spring Guide
Placement Pins 28”
Steel Plate
Placement Pins
Steel Sticker Setup
JM330 Crown Rail Jig
Page 3 of 4
Stile & Rail Edge
Set of 17 Crown Rail Patternsdoor sizes 9½” to 26”
May 2018 - 17
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 17 - Copyright © 2018 all Rights Reserved
Raised Panel Hold Down
SH1516 Shaper5HP (1-1/4” Spindle, 20”x28” top)
3 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 3 of 3
Raised Panel Guides &Ball Bearing Rub Collar
WEAVER
Sample Door - Crown
Raised Panel & Partial Under Raiser Heads & tips.
IPAGES-SY-3SS-3/4
NOTE: For Crown Raising, use only the infeed side of
the Fence
Page 4 of 4
Weaver Belt Power Feeder
Raised Panel Dust Shield
Power Feeder
Dust Shield
Panel Raising using the Raised Panel Hold Down
Item# Description SH1516 Shaper 5HP (1-1/4” Spindle, 20”x28” top) FREIT15-001 Raised Panel Cutter Head 1-1/4”ID w/tips (3) FREIT16-001 Partial Under Raiser Cutter Head with tips(3) FE275028 Partial Offset Raised Panel Guides 2-3/4” BB2246 Ball Bearing Rub Collar HD3100 Raised Panel Hold Down PF721W Weaver Double Bond Belt Power Feeder DS465 Raised Panel Dust Shield WD6086 Warning Disc 6-1/4”ODx1-1/4”ID
Shaper 3 of 3 Crown Panel
Raising
Shaper 3 of 3 Straight Panel
Raising
Shaper for Panel Raising Straight & Crown Setup (with Alloy Insert Tip Raised Panel Cutters)
Note: In some of our pictures and illustrations the warning discs, Dust
Shields, and some accessories have been removed for better illustration of the
cutter and work.
18 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 18 - Copyright © 2018 all Rights Reserved
$19,995
GLASS MULLION CABINET DOOR 2 SHAPER SYSTEM
for the frame, divided light & grille mullions ...
SH1316 Shaper 3HP (1-1/4” Spindle 28” x 20” Top)
SH1316 Shaper 3HP (1-1/4” Spindle 28” x 20” Top)
WEAVER
Sticker Guide Fence
Fence in line with cutters Sticker Spring Guide
Placement Pins 28”
Steel Plate
HD360 Sticker Plate Setup
Placement Pins
Top & Bottom Shaper Wrenches - Warning Discs
Tenon Fence
Crown Rail Jig
2 Shaper Glass Mullions Cabinet Door System with Air Ten-on Jig, Power Feeder, Cutters and accessories to produce square and crown glass cabinet doors with mullions.
Sticking Setup For Frame & MullionsWeaver Belt
Power Feeder
TenonFence
DustShield Air Tenon
Fixture
ilBrazed Tip Stile & Ra-Set For Glass Doors
Rail Half
Brazed Tip Stile & Rail Set For Glass Doors - Stile Half
(Running3/8” materialfor Grilles)
Brazed Tip Stile & Rail Set For Glass Doors -
Stile Half
Weaver Variable Speed Belt Power Feeder
Crown Rail Patterns
Tenon Setup For Frame & Mullions
Dead Collar
May 2018 - 19
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 19 - Copyright © 2018 all Rights Reserved
Wood - Stile
Wood - Panel
MADE IN U.S.A.
With your Weaver System you now can offer elaborate custom kitchen cabinetry . . . efficiently, out of any species of wood - knowing that simply changing a pattern or
sticking spacer is all that’s needed.
6 SHAPER CABINET DOOR SYSTEMSIX SHAPER PNEUMATIC AND POWER FEED CROWN RAISED PANEL DOOR SYSTEM Page 1 of 7
System Price 1 Phase: 3 Phase
$59,495$57,995
WEAVERManufactured
In U.S.A.
The system you receive will be preset by a craftsman and shipped with samples, you can start producing shortly after your equipment arrives.
With 2 Shapermaster Air Jigs, 2 Power Feeders, cutter sets, fences, jigs and fixtures mounted, adjusted and ready to produce!
Machine a Crown Raised Panel door in less than 3
minutes - A Square Raised Panel door in
less than 2 minutes.
02:52Minutes Seconds
With the Variable Speed Power Feeder, Jigs and Fixtures you can make wide varieties and sizes of doors. Machine a raised panel door
in less than 2 minutes!
Fast -
20 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 20 - Copyright © 2018 all Rights Reserved
Shaper for TenonItem# DescriptionSH1336 Shaper 3HP (1-1/4” Spindle, 20”x28”top)SHIX38 Table GrooveFREPT-10-010-E01 1-1/4” Bore Brazed Tip Rail Cutter Set w/EasementAJ1201RW Air Tenon JigFE27 Tenon Fence DS440 Dust Shield for Air Tenon WR620 Top WrenchWR6180 Bottom WrenchWD4166 Warning Disc 4-1/2”OD x 1-1/4”ID
Shaper Wrenches
6 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 1 of 6 TENONING
Note: In some of our pictures and illustrations the warning
discs, Dust Shields, and some accessories have been removed for better illustration
of the cutter and work.
Tenon Fence
Warning Disc
Page 2 of 7
Dust Shield for Air Tenon
WEAVER
Tenoning Shaper
Air Tenon Jig - Travels in 3/4” x 3/8” groove
Alloy Braised Tip Rail Cutter
SH1336 Shaper 3HP (1-1/4” Spindle 20” x 28” Top)with Table Groove
12” Inside Overall
May 2018 - 21
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 21 - Copyright © 2018 all Rights Reserved
Shaper for TenonItem# DescriptionSH1336 Shaper 3HP (1-1/4” Spindle, 20”x28”top)SHIX38 Table GrooveFREPT-10-010-E01 1-1/4” Bore Brazed Tip Rail Cutter Set w/EasementAJ1201RW Air Tenon JigFE27 Tenon Fence DS440 Dust Shield for Air Tenon WR620 Top WrenchWR6180 Bottom WrenchWD4166 Warning Disc 4-1/2”OD x 1-1/4”ID
Weaver Belt Power Feeder
6 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 2 of 6 STRAIGHT STICKING
Note: In some of our pictures and illustrations the warn-ing discs, Dust Shields, and some accessories have been
removed for better illustration of the cutter and work.
Dust Shield for Straight Sticking
Page 3 of 7
Straight Sticking Shaper
WEAVER
Warning Disc
Sticker Spring Guide
Sticker Guide Fence
SH1336 Shaper 3HP (1-1/4” Spindle 20” x 28” Top)
Straight Stile & Rail StickingItem# Description SH1336 Shaper 3HP (1-1/4” Spindle, 20”x28”top)FREIT-10-010-PE 1-1/4” Bore Stile Head with Insert Tips (3)FE211 Sticker Spring GuideFE213H Sticker Guide Fence w/Hold DownPF721W Variable Speed double bond belt FeederDS443 Dust Shield for Straight StilesWD4246 Warning Disc 4-3/4”ODx1-1/4”ID
Stile Head & Tips
Stile & Rail Edge
22 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 22 - Copyright © 2018 all Rights Reserved
Shaper for Straight Panel RaisingItem# DescriptionSH1536 Shaper 5HP (1-1/4” Spindle, 20”x28”top)FREIT15-001 Raised Panel Cutter Head 1-1/4” Bore w/tips (3)FREIT16-001 Partial Under Raiser Cutter Head with tips(3)FE2752801 Continuous Offset Raise Panel GuideHD3100 Raised Panel Hold Down PF721W Variable Speed double-bond belt FeederDS460 Dust Shield for Straight Raised PanelWD6086 Warning Disc
Raised Panel Dust Shield
6 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 3 of 6 STRAIGHT PANEL RAISING
Note: In some of our pictures and illustrations the warn-ing discs, Dust Shields, and some accessories have been
removed for better illustration of the cutter and work.
Warning Disc
Page 4 of 7
Straight Panel Fence
Straight Panel Raising Shaper
WEAVER
Weaver Belt Power Feeder
SH1536 Shaper 5HP (1-1/4” Spindle 20” x 28” Top)
Raised Panel Hold Down
Raised Panel & Partial Under Raiser Heads &
Tips
May 2018 - 23
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 23 - Copyright © 2018 all Rights Reserved
Shaper for Straight Panel RaisingItem# DescriptionSH1536 Shaper 5HP (1-1/4” Spindle, 20”x28”top)FREIT15-001 Raised Panel Cutter Head 1-1/4” Bore w/tips (3)FREIT16-001 Partial Under Raiser Cutter Head with tips(3)FE2752801 Continuous Offset Raise Panel GuideHD3100 Raised Panel Hold Down PF721W Variable Speed double-bond belt FeederDS460 Dust Shield for Straight Raised PanelWD6086 Warning Disc
Shaper for Rail & Panel TrimmingItem# DescriptionSH2536 Shaper 5HP (1-1/4” Spindle, 28”x40”top)C9936V Stacked Rail & Panel Trimming CutterDC312-308-22-3-1/2 - Double O.D. for TrimmerFE77 Right Half of Split Fence w/Depth BoltDS470 Dust Shield for Rail & Panel Trimming with ShapermastersWD4086 Warning Disc - 4-1/ 4”ODx1-1/4”ID
Right Half of Split Fence (w/depth bolt)
Dust Shield for Shapermasters
Stacked Rail & Panel Trimming Cutter
6 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 4 of 6 PANEL & RAIL TRIMMING
Note: In some of our pictures and illustrations the warn-ing discs, Dust Shields, and some accessories have been
removed for better illustration of the cutter and work.
Warning Disc
Page 5 of 7
Rail & Panel Trimming Shaper(Trimming panel shown.)
WEAVERSH2536 Shaper 5HP (1-1/4” Spindle 28” x 40” Top)
24 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 24 - Copyright © 2018 all Rights Reserved
6 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 5 of 6 SHAPING CROWN RAIL
Right Half of Split Fence
Plexiglass Patterns - Crown Rail
Page 6 of 7WEAVER
Warning Disc
Crown Rail Shaper
Shapermaster
24” Inside
Shaper for Crown Rail StickingItem# DescriptionSH2336 Shaper 3HP (1-1/4” Spindle, 28”x40”top)FREIT-10-010-PE 1-1/4” Bore Stile Head with Insert Tips (3)DC31630 Dead Collar for 4-3/4”WD 3-1/2” ODx3-3/4” HeightAJ2402 Shapermaster 24” x 12”PA2417 Plexiglass Patterns - 1-1/2” Crown Rail & PanelDS470 Dust Shield for ShapermastersFE78 Right Half of Split FenceWD4246 Warning Disc
SH2336 Shaper 3HP (1-1/4” Spindle 28” x 40” Top)
Note: In some of our pictures and illustrations the warn-ing discs, Dust Shields, and some accessories have been
removed for better illustration of the cutter and work.
Dust Shield for Shapermasters
Stile Head & Tips
Stile & Rail Edge
May 2018 - 25
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 25 - Copyright © 2018 all Rights Reserved
Shaper for Crown Panel RaisingItem# DescriptionSH2536 Shaper 5HP (1-1/4” Spindle, 28”x40”top)FREIT15-001 Raised Panel Cutter Head 1-1/4” Bore w/tips (3)FREIT16-001 Partial Under Raiser Cutter Head with tips (3)AJ2402 Shapermaster 24” x 12”
DC22422 Dead Collar for 6-1/4” WD - 2-3/4”ODx2-3/4”IDFE78 Right Half of Split FenceDS470 Dust ShieldWD6086 Warning Disc - 6-1/4” ODx1-1/4”ID
Note: In some of our pictures and illustrations the warn-ing discs, Dust Shields, and some accessories have been
removed for better illustration of the cutter and work.
Right Half of Split Fence
Warning Disc
Dead Collar
Dust Shield for Shapermasters
WEAVER
Plexiglass Patterns - Crown Panel
Shapermaster
24” Inside
6 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEMSHAPER 6 of 6 CROWN PANEL RAISING Page 7 of 7
SH2536 Shaper 5HP (1-1/4” Spindle 28” x 40” Top)
Crown Panel Shaper
Raised Panel & Partial Under Raiser Heads &
Tips
26 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 26 - Copyright © 2018 all Rights Reserved
Door Edge Dust Shield
General Hold Down
Table Groove
Manufactured In U.S.A.
Shaper-Large (1-1/4” Spindle 28” x 40” Top)
Dust shield For Door Edge
Note: In some of our pictures and illustrations the warning discs, dust shields, and some accessories have been removed for better illustration of the cutter and work.
SH2316 Shaper 3HP (1-1/4” Spindle 28” x 40” Top)with shaper top groove.
Door Edge SetupItem# Description
SH2316 Shaper-Large 3HP(3/4” Spindle 28” x 40” Top)
SH2X39 Table GrooveFREPC17-110 Door Edge Top Cutter (Braised Tip)FEDE2240-U Continuous Door Edge Fence - Slotted
HD3150 General Hold Down DS480 Dust Shield for Door Edge HD222 Drawer & Drawer Front Hold Down
WR620 Top WrenchWR6180 Bottom WrenchWD4166 Warning disc
System Total: $9,000
General Hold Down
Drawer & Drawer Front Hold Down
Continuous Door Edge Fence
DOOR EDGE SHAPER WEAVERManufactured
In U.S.A.
Fence
Top & Bottom Shaper Wrenches
- Warning Disc
May 2018 - 27
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 27 - Copyright © 2018 all Rights Reserved
DOOR EDGE SHAPERDrawer Ends Hold Down
Door Edge Dust Shield
Split Double Adjusting Fence
General Hold Down
Table Groove
Stock
WEAVERManufactured
In U.S.A.
Shaper-Large (1-1/4” Spindle 28” x 40” Top)
Door Edge Head - CCW FU & Door Edge Profile Tips
Split Door Edge Fence with Dual Adjustments
Drawer Ends Hold Down
General Hold DownDust Shield For
Door Edge
Note: In some of our pictures and illustrations the warning discs,
Dust Shields, and some accesso-ries have been removed for better illustration of the cutter and work.
Top & Bottom Shaper Wrenches
- Warning Disc
SH2316 Shaper 3HP (1-1/4” Spindle 28” x 40” Top)with shaper top groove.
Door Edge SetupItem# Description
SH2316 Shaper-Large 3HP(1-1/4" Spindle 28" x 40" Top)
SH2X39 Table GrooveFE5640 Split Door Edge Fence w/Dual Adj. HD3150 General Hold DownHD222 Drawer Ends Hold DownDS482 Dust Shield for Door EdgeBYDE1RH Byrd Door Edge Head - CCW FU
with BYRD-1DERH Insert Tips (3)WR620 Top WrenchWR6180 Bottom WrenchWD5086 Warning Disc
System Total: $9,050
28 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 28 - Copyright © 2018 all Rights Reserved
Door Edge Setup Item# Description SH2316 Shaper-Large 3HP (1-1/4” Spindle 28” x 40” Top) SH2X39 Table Groove FE5640 Split Door Edge Fence w/Dual Adj. HD3150 General Hold Down HD222 Drawer Ends Hold Down DS460 Dust Shield for Door Edge BYRD-DERH Byrd Door Edge Head - CCW FU BYRD-1DERH Byrd Door Edge Profile Tips (3) WR620 Top Wrench WR6180 Bottom Wrench WD5086 Warning Disc System Total $3,691
Rip your stile and rail stock oversize approximately 1/16”. The stile cutter will cut to exact size and shape the detail on edge. The power feeder pushes the material and the spring loaded fence guides the material against the outside fence and away from the cutters. This set-up sizes your material, minimizes any bumps or chatter marks in your material and avoids cutter burn marks. Make different widths of stile or rail by only changing spacer sticks.
STILE & RAIL STICKING
Shaker door sticking exploded view.
Your system will arrive with the shaper cutters on the shapers already ad-justed. Accessories will be adjusted and most mounted to the shapers. You can start producing shortly after the equipment arrives. You can produce doors with one man or two men - and can efficiently make 100 doors or make just one door without changing setups.
This system uses two machines to make a shaker cabinet door, usually consist-ing of two 3 HP shapers. Shaper One is setup for tenoning the rails. Shaper Two is setup for running straight stiles. Since the system is two separate shapers you will be able to position them in your shop to maximize your shop’s produc-tion needs.
2 SHAPER SHAKER CABINET DOOR FRAME SYSTEM How it WorksWEAVER
The tenon cut is made quickly and easily with this set up. The Air Tenon Jig secures the rail with pneumatic clamp and glides on a thin cushion of air making the operation effortless. To insure an accurate tenon cut every time, the air Jig operates in a shaper top groove in conJunec-tion with the Tenon Fence. (There is a backup wood block to prevent chipping of wood.)
TENONING
Shaker door tenon exploded view.
A power feeder is included on the stile shaper. The Weaver variable speed belt power feeder gives you the capability to run short rails that are impossible with roller feeders - as well, they improve the ease of the sticking operation.
The system you receive will be preset by a craftsman and shipped to you with samples.
with Air Tenon Jig and Power Feeder
May 2018 - 29
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 29 - Copyright © 2018 all Rights Reserved
Item# Description
SH1316 Shaper 3HP 1 Phase(1-1/4” Spindle, 20”x28”top)
BY7LS-1-1/4” Bore Shaker Stile Cutter Head with tips (3) FE360H Steel Sticker Plate w/Hold Down
PF721W Weaver Variable Speed Belt Power FeederDS452 Dust Shield for Straight Stiles
WD4246 Warning Disc 4-3/4”ODx1-1/4”ID
System Total: $ 17,995
Shaper for Straight Stile & Rail Sticking
Weaver Belt
Power Feeder
This cabinet door shaper system is pre-setup and ready to produce: it comes with two Weaver industrial shapers, air tenon jig, power feeder, two Dust Shields, steel sticker plate setup, tenon fence, the stile & rail cutters adjusted and setup on the shapers. Plus a sample door made by the system.
Tenon Fence
Dust Shield for Tenon
Dust Shield for Straight
Sticking
Shaper 1-1/4” Spindle, 20”x28” top withTable Top Groove
Shaper 1-1/4” Spindle, 20”x28” top.
Shaker Stile Insert Heads & Tips
Shaker Rail Insert Heads & Tips
Cutters - setup, adjusted and mounted on the shapers.
2 SHAPER SHAKER CABINET DOOR SYSTEMWhat you Get WEAVER
Air Tenon JigTravels in 3/4” x 3/8” groove
(Shapers with 3 Phase 3 HP same price.)
Sample Door
(For optional cutter profiles, see cutter pages - also See optional shaker panel raising shaper)
Top & Bottom Shaper Wrenches - Warning Discs
Shaper for Tenon
Item# Description
SH1316 Shaper 3HP 1 Phase (1-1/4” Spindle, 20”x28”top) SHIX38 Table Groove BY7LR-1-1/4” Bore Shaker Rail Cutter Head with tips (3) AJ1201RW Air Tenon Jig FE5628 Split Tenon Fence DS441 Dust Shield WR620 Top Wrench WR6180 Bottom Wrench WD4246 Warning Disc 4-3/4”OD x 1-1/4”ID
Univ. General Hold DownFence in line with
cutters
Placement Pins
28”
Steel Plate
Steel Sticker Setup
Sticker Spring Guide
Sticker Guide Fence
with Air Tenon Jig and Power Feeder
30 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 30 - Copyright © 2018 all Rights Reserved
The tenon cut is made quickly and easily with this set up. The Manual Coping Hold Down has a quick action pressure bar that holds the part as you squeeze the handles. There is a backup wood block to minimize chipping of the wood. The Tenon Fence is a straight fence running through the middle of the cutters providing a positive guide to run your material against.
2 SHAPER SHAKER CABINET DOOR SYSTEM
Your system will arrive with the shaper cutters on the shapers already ad-justed. All accessories will be adjusted and most mounted to the shapers. You can start producing shortly after the equipment arrives. You can produce doors with one man or two men - and can efficiently make 100 doors or make just one door without changing setups.
How it WorksWEAVER
Shaker door tenon exploded view.
Rip your stile and rail stock oversize approximately 1/16”. The stile cutter will cut to exact size and shape the detail on edge. The spring loaded fence guides the material against the outside fence and away from the cutters. This set-up sizes your material, minimizes any bumps or chatter marks in your material and avoids cutter burn marks. Make different widths of stile or rail by only changing spacer sticks.
Shaker door sticking exploded view.
Sticking
Tenoning
This system uses two machines to make the shaker cabinet door frame, consist-ing of two 3 HP shapers. Shaper One is setup for tenoning the rails. Shaper Two is setup for running straight stiles.
The system you receive will be preset by a craftsman and shipped to you with samples.
with Manual Hold Down
STILE & RAIL STICKING
TENONING
May 2018 - 31
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 31 - Copyright © 2018 all Rights Reserved
Item# Description SH1313 Shaper 3HP 1 Phase (3/4” Spindle, 20”x28”top) Stile Half of Shaker Set - - (FREMC50-500-501) FE363H Steel Sticker Plate w/Hold Down DS450 Dust Shield for Straight Stiles WD3163 Warning Disc 31/2”ODX 3/4”ID System Total:
----------$12,995
Tenon Jig - Travels in 3/4” x 3/8” groove
This Weaver shaker cabinet door shaper system is pre-setup and ready to produce: it comes with two Weaver industrial shapers, manual coping jig, Dust Shields, steel sticker plate setup, tenon fence, the stile & rail cutters adjusted and setup on the shapers. Plus a sample door made by the system.
Tenon Fence
Dust Shield for Tenon
Dust Shield for Straight
Sticking Top & Bottom Shaper Wrenches - Warning Discs
Shaper 3/4” Spindle, 20”x28” top with Table Top Groove
Shaper 3/4” Spindle, 20”x28” top
2 SHAPER SHAKER CABINET DOOR SYSTEMWhat you Get WEAVERCutters - setup, adjusted and
mounted on the shapers.
Sample Door
PF721W Weaver Belt Power Feeder
The Weaver Power Feeder can be added which will feed the material through and improve the quality and consistency of the operation.
PF721W Weaver Variable Speed Belt Power Feeder $2,995
Add double bond belt Weaver Power Feeder:
(For optional cutter profiles, see cutter pages) (See optional shaker panel raising shaper)
Rail Half of Shaker Stile & Rail Set 3/4” Bore
-
Stile Half of Shaker Stile & Rail Set 3/4” Bore
-
Shaper for Straight Stile & Rail Sticking
(Shaper with 3 Phase 3 HP same price.)
Shaper for Tenon
Item# Description
SH1313 Shaper 3HP 1 Phase (3/4” Spindle, 20”x28”top) SHIX38 Table Groove FREMC50-500-501 Rail Half of Shaker Set - 3/4” Bore HD225 Tenon Jig FE25 Tenon Fence DS452 Dust Shield WR618 Top Wrench WR6180 Bottom Wrench WD3163 Warning Disc 31/2”ODX 3/4”ID
Univ. General Hold DownFence in line with
cutters
Placement Pins
28”
Steel Plate
Steel Sticker Setup
Sticker Spring Guide
Sticker Guide Fence
with Manual Hold Down
32 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 32 - Copyright © 2018 all Rights Reserved
Shaker door sticking exploded view.
Shaker door tenon exploded view.
Rip your stile and rail stock oversize approximately 1/16”. The stile cutter will cut to exact size and shape the detail on edge. The spring loaded fence guides the material against the outside fence and away from the cutters. This set-up sizes your material, minimizes any bumps or chatter marks in your material and avoids cutter burn marks. Make different widths of stile or rail by only changing spacer sticks.
1 SHAPER SHAKER CABINET DOOR SYSTEM
How it WorksWEAVER
The system you receive will be preset by a craftsman and shipped to you with samples.
Sticking
Tenoning
This system uses one 3 HP machine to make a shaker cabinet door. Your system will arrive with either the tenon cutters or the sticking cutters set-up on the shaper, and the other on a cutter board holding dowel. Your Tenon Fence and Sticker Plate are lined up to the proper position by index pins making them easy to line up and bolt down. The need for spindle or cutter height adjustment is eliminated by using tooling that lines up or a spacer system.
Coping Hold Down
Shaper
Tenon Fence
Warning Disc, CuttersDust
Shield
Top Groove for Tenon Jig
Steel Sticker Plate w/Hold Down
Stock
Tenon/Rail
Stile/Sticking
Cutter setups - spaced and shimmed, ready to load on shaper
The tenon cut is made quickly and easily with this set up. The Manual Coping Hold Down has a quick action pressure bar that holds the part as you squeeze the handles as you push the rail though the cutters. There is a backup wood block to minimize chipping of the wood. The Tenon Fence is a straight fence running through the middle of the cutters providing a positive guide to run your material against.
STILE & RAIL STICKING
TENONING
May 2018 - 33
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 33 - Copyright © 2018 all Rights Reserved
This Weaver shaker cabinet door shaper system is pre-setup and ready to produce: it comes with a Weaver industrial shaper, manual coping jig, Dust Shield, steel sticker plate setup, tenon fence, the stile & rail cutters adjusted and ready to setup on the shapers. Plus a sample door made by the system.
Dust Shield for Tenon/Straight
Sticking
Top & Bottom Shaper Wrenches - Warning Discs
Sample Door
Tenon Jig - Travels in 3/4” x 3/8” groove
Tenoning Accesories Item# Description FREMC50-500-501 Rail Half of Shaker Set - 3/4” Bore HD225W Tenon Jig FE25 Tenon Fence WD3163 Warning Disc 31/2”OD x 3/4”ID
1 SHAPER SHAKER CABINET DOOR FRAME SYSTEMWhat you Get WEAVER
Rail Half of Shaker Stile & Rail Set 3/4” Bore
Stile Half of Shaker Stile & Rail Set 3/4” Bore
-
Tenon Fence
(Shaper with 3 Phase 3 HP same price.)
Cutters - setup, adjusted and ready to mount on the shapers.
The Weaver Power Feeder can be added which will feed the material through and improve the quality and consistency of the operation.
Add Weaver Belt Power Feeder:
PF721W Weaver Variable Speed Belt Power Feeder $ 2,995
General Hold DownFence in line with
cutters
Placement Pins
28”
Steel Plate
Steel Sticker Setup
Sticker Spring Guide
Sticker Guide Fence
Shaper 3/4” Spindle, 20”x28” top w/Table Top Groove
Shaper for Tenon & Sticking Item# Description
SH1313 Shaper 3HP 1 Phase (3/4” Spindle, 20”x28”top) SHIX38 Table Groove DS433 Dust Shield WR618 Top Wrench (for 3/4” Spindle) WR6180 Bottom Wrench
Straight Stile & Rail Sticking AccessoriesItem# Description
FREMC50-500-501 Stile Half of Shaker Set - 3/4” BoreFE363H Steel Sticker Plate SetupWD3163 Warning Disc 31/2”OD x 3/4”ID
1 Shaper System for Shaker Cabinet Door Frame: $ 7,695
34 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 34 - Copyright © 2018 all Rights Reserved
Shaker Straight Panel Raising Shaper How it WorksWEAVER
Shaker door exploded view backside with ‘partial raised’ panel.
This system uses a 3 HP machine to shape a shaker partial back raised panel. Your system will arrive with the cutter already on the shaper and adjusted.
The accessories will be adjusted, and mounted to the shaper. You can start producing shortly after the equipment arrives.
Panels are produced efficiently with this setup. The Raised Panel Hold Down has a polished steel hoop that is spring tensioned to put pressure down on the panel. The raised panel guide provides a positive guide to run your panel against.
SHAKER PARTIAL BACK PANEL RAISING
Sample Shaker Panel
Partial Back for Shaker Flat Panel
The system you receive will be preset by a craftsman and shipped to you with samples.
Shaker door corner backside view with
‘partial raised’ panel.
May 2018 - 35
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 35 - Copyright © 2018 all Rights Reserved
The Weaver Power Feeder can be added which will push the material through and improve the quality and consistency of the operation.
Shaker Straight Panel Raising Shaper
Raised Panel Hold Down
Top & Bottom Shaper Wrenches -
Warning Discs
Raised Panel Dust ShieldStraight Panel Fence
What you Get WEAVER
This Weaver shaker panel raising shaper system is pre-setup and ready to produce: it comes with a Weaver industrial shaper, raised panel hold down, raised panel guide - shaker partial back panel raiser cutter adjusted and setup on the shaper, assembled and mounted along with the sample panel made by the system.
Cutters - setup and adjusted on the shaper.
Shaper for Straight Panel Raising
Fence or Bearing
(Shaper with 3 Phase 3 HP same price.)
Shaper 1-1/4” Spindle, 20”x28” top.
PF721W Weaver Variable Speed Belt Power Feeder $ 2,995
Add Weaver Belt Power Feeder:
For 5 HP 1 Phase, add
$400
Partial Raiser - Car-bide 1-1/4” Bore
Item# Description
SH1316 Shaper 3HP 1 Phase(1-1/4” Spindle, 20”x28”top)
FREPC16-001R Partial Raiser - Carbide 1-1/4” BoreFE27528 Continuous Raised Panel GuideHD3100 Raised Panel Hold Down
DS460 Dust Shield for Straight Raised PanelWD6086 Warning Disc
WR620 Shaper Wrench - TopWR6180 Shaper Wrench - Bottom
System Total: $ 6,495
A Weaver Power Feeder can be added
Horse Power / Phase Options
36 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 36 - Copyright © 2018 all Rights Reserved
Panel RaisersPanel Trimming
Tenon/Rail
Stile
Wood - Stile
Wood - Panel
1 SHAPER CROWN RAISED PANEL
Power Feeder
Coping Hold Down
Shaper
Tenon Fence
Dust Shield
Top Groove for Tenon Jig
Sticking Spacer Board
Top & Bottom Shaper Wrenches - Warning Discs
Tenon Setup Item# Description
SH1516 Shaper 5HP (1-1/4” Spindle, 20”x28” top) SHIX38 Table Groove WD4246 Warning Disc FREPC10-010-501-E 1-1/4” Bore Quarter Rd. Stile & Rail Cutter Set 1/4” x 1/2” Tongue HD225W Manual Coping Jig FE25 Tenon Fence WR620 Top Wrench WR6180 Bottom Wrench SPA125 Adjustable Spacer Set DS440 Dust Shield
Stile and Rail Sticking Straight & Crown Setup Item# Description BB3086 3-1/4x1-1/4 Ball Bearing Rub Collar JM330 Crown Rail Jig PA427 1-1/2” Wood Crown Rail Patterns FE360H Sticker Plate Setup w/Hold Down (incl.HD216 Flat Mt. General Hold Down) PF721W Variable Speed double bond belt Feeder DS455 Dust Shield Crown & Straight Stile & Rails WD4246 Warning Disc SPA125 Adjustable Spacer Set
Panel Trimming Setup Item# Description
WD4086 Warning Disc FRE8389 Panel Trimming Cutter 2W Carbide Square Edge BB2166 Ball Bearing Rub Collar JM310 Crown Panel Jig PA417 1-1/2” Wood Crown Panel Patterns SPA125 Adjustable Spacer Set
Note: In some of our pictures and illustrations the warning discs, Dust Shields, and some accessories have been removed
for better illustration of the cutter and work.
(3) Adjustable Spacer Sys-tem Units
Raised Panel Hold Down
WEAVERManufactured
In U.S.A.
CABINET DOOR SYSTEM
Steel Sticker Plate Setup
SH1516 Shaper 5HP (1-1/4” Spindle 20” x 28” Top) with groove.
Cutter setups - spaced and shimmed, ready to load on shaper
Crown Rail Jig
Set of 10 Crown Panel Patterns-door sizes 9½” to 22”
Set of 10 Crown Rail Patterns - door sizes 9½” to 22”
Sample Door - Crown 11/2” Rise
Dust Shields for Tenon, Sticking, Crown Rail and Panel Shaping.
Crown Panel Jig
Ball Bearing Rub Collar
Panel Raising Straight & Crown Setup Item# Description WD6086 Warning Disc FREPC15-001 Raised Panel Cutter 001 Profile - 5/8” Stock 1-1/4” ID 3 Wing - Carbide FREPC16-001 Partial Back Raised Panel Cutter 001 Profile 1-1/4” ID 3 Wing - Carbide BB2246 Ball Bearing Rub Collar FE275028 Partial Offset Raised Panel Guides HD3100 Raised Panel Hold Down DS465 Raised Panel Dust Shield - Crown & Straight
System Price listed withPower Feeder & Coping Hold Down: $15,595
Tenon Jig - Travels in 3/4” x 3/8” groove
Tenon Fence
May 2018 - 37
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 37 - Copyright © 2018 all Rights Reserved
Wood - Stile
Wood - Panel
1 SHAPER CROWN RAISED PANEL
Power Feeder
Air Tenon Jig
Shaper
Tenon Fence
Dust Shield
Top Groove for Tenon Jig
Sticking Spacer Board
Top & Bottom Shaper Wrenches - Warning Discs
Tenon Setup Item# Description
SH1516 Shaper 5HP (1-1/4” Spindle, 20”x28” top) SHIX38 Table Groove WD4246 Warning Disc BY1LHRE-1-1/4” Bore Rail Insert Head with tips (3), AJ1201RW Air Tenon Jig FE5628 Adjustable Split Tenon Fence WR620 Top Wrench WR6180 Bottom Wrench SPA125 Adjustable Spacer Set DS440 Dust Shield
Stile and Rail Sticking Straight & Crown Setup Item# Description BY1LHSE-1-1/4” Bore Stile Insert Head with tips (3) BB3166 3-1/2x1-1/4 Ball Bearing Rub Collar JM330 Crown Rail Jig PA427 1-1/2” Wood Crown Rail Patterns FE360H Sticker Plate Setup w/Hold Down (incl.HD216 Flat Mt. General Hold Down) PF721W Variable Speed double bond belt Feeder DS455 Dust Shield Crown & Straight Stile & Rails WD4246 Warning Disc SPA125 Adjustable Spacer Set
Adjustable Split Fence
Panel Trimming Setup Item# Description
WD4086 Warning Disc FRE8389 Panel Trimming Cutter 2W Carbide Square Edge BB2166 Ball Bearing Rub Collar JM310 Crown Panel Jig PA417 1-1/2” Wood Crown Panel Patterns SPA125 Adjustable Spacer Set
Note: In some of our pictures and illustrations the warning discs, Dust Shields, and some accessories have been removed
for better illustration of the cutter and work.
Air Tenon Jig - Travels in 3/4” x 3/8” groove
(3) Adjustable Spacer Sys-tem Units
Raised Panel Hold Down
WEAVERManufactured
In U.S.A.
CABINET DOOR SYSTEM
Steel Sticker Plate Setup
SH1516 Shaper 5HP (1-1/4” Spindle 20” x 28” Top) with groove.
Panel Raisers
Panel Trimming
Tenon/Rail
Stile
Cutter setups - spaced and shimmed, ready to load on shaper
Crown Rail Jig
Set of 10 Crown Panel Patterns-door sizes 9½” to 22”
Set of 10 Crown Rail Patterns - door sizes 9½” to 22”
Sample Door - Crown 11/2” Rise
Dust Shields for Tenon, Sticking, Crown Rail and Panel Shaping.
Crown Panel Jig
Ball Bearing Rub Collar
Panel Raising Straight & Crown Setup Item# Description WD6086 Warning Disc Byrd-LH-Panel Raised Panel Cutter Head Byrd-P201LHS Scoop Insert Tips (3) BB2246 Ball Bearing Rub Collar Byrd-LH Partial Under Raiser Cutter Head Byrd-PRBLH Partial Under Raiser Insert Tips (3) FE275028 Partial Offset Raised Panel Guides HD3100 Raised Panel Hold Down DS465 Raised Panel Dust Shield - Crown & Straight System Price listed with Power Feeder & Air Tenon Fixture: $16,395
38 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 38 - Copyright © 2018 all Rights Reserved
Tenon Jig
Shaper
Tenon Fence Dust
Shield
Top Groove for Tenon Tool
Steel Sticker Plate Setup
SH1516 Shaper 5HP (1-1/4” Spindle 20” x 28” Top) with groove.
1 SHAPER CROWN RAISED PANEL
Note: In some of our pictures and illustrations the warning discs, Dust Shields, and some accessories have been removed
for better illustration of the cutter and work.
Manufactured In U.S.A. CABINET DOOR SYSTEM
Panel RaisersPanel Trimming
Tenon/Rail
Stile
One shaper with cutters, jigs & patterns and accessories for making cabinet doors plus our adjustable spacer system. Your system will be preset by a craftsman and shipped with samples.
Single Shaper System I
Panel Raising Straight & Crown Setup Item# Description WD6086 Warning Disc FREPC15-001 Raised Panel Cutter 3 Wing 1-1/4” Bore BB2246 Ball Bearing Rub Collar 2-3/4” O.D. 1-1/4” Bore FE27528 Raised Panel Guides HD3100 Raised Panel Hold Down DS465 Raised Panel Dust Shield - Crown & Straight
Stile and Rail Sticking Straight & Crown Setup Item# Description BB3086 3-1/4” x 1-1/4” Bore Ball Bearing Rub Collar JM330 Crown Rail Jig PA427 Hardwood Crown Rail Patterns FE360H Sticker Plate Setup w/Hold Down (incl.HD216 Univ. General Hold Down) DS455 Dust Shield Crown & Straight Stile & Rails WD4246 Warning Disc SPA125 Adjustable Spacer Set
Panel Trimming Setup Item# Description WD4086 Warning Disc FRE8389 Panel Trimming Cutter 2W Carbide Square Edge BB2166 Ball Bearing Rub Collar JM310 Crown Panel Jig PA417 Hardwood Oval Panel Patterns SPA125 Adjustable Spacer Set
Tenon Setup Item# Description SH1516 Shaper 5HP (1-1/4” Spindle, 20”x28” top) SHIX38 Table Groove WD4246 Warning Disc FREPC10-010-501-E 1-1/4” Bore Quarter Rd. Stile & Rail Cutter Set 1/4” x 1/2” Tongue HD225 Tenon Jig FE25 Tenon Fence WR620 Top Wrench WR6180 Bottom Wrench SPA125 Adjustable Spacer Set DS441 Dust Shield
System Price: $12,595
Wood - Stile
Wood - Panel
Sample Door - Crown 11/2” Rise
Hold Down
May 2014 - 39
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Phone 1-913-831-1800 Fax 1-913-831-2974 - 39 - Copyright © 2014 all Rights Reserved
Set of 10 Crown Panel Patterns-door sizes 9½” to 22”
What You Get WEAVERCABINET DOOR SYSTEM
I
E
O
CB
Weaver Industrial Shaper SH1516 Industrial Shaper
5HP 1 Phase , 1-1/4” Spindle, 20”x28”top
A
J
QP
GF
L
E
1 SHAPER CROWN RAISED PANEL
28”
Fence in line with cutters
Placement Pins
Ste
el P
late
HD360H Sticker Setup Sticker Spring Guide
Sticker Guide Fence
Univ. General Hold Down
Top & Bottom Shaper Wrenches - Warning Discs
Tenon Fence Crown Rail Jig
Set of 10 Crown Rail Patterns - door sizes 9½” to 22”
Crown Panel Jig
Raised Panel Guides
Adjustable Spacer System Units
Raised Panel Hold Down
1-1/4” Bore 3 Wing Carbide Stile & Rail
Set (Stile Half)
1-1/4” Bore 3 Wing Carbide Stile & Rail Set
(Rail Half)
Square Edge Panel Trimming Cutter and Ball
Bearing Rub Collar
Dust Shields (3) for Tenon, Panel Raising, Crown & Straight Sticking
H
D
K
M N
Raised Panel Cutters - 3 Wing Carbide 1-1/4” Bore Panel Raiser.
Ball Bearing Rub Collar for Crown
Panel Raising
18”Opening for Stock
18” Open-ing for Stock
Ball Bearing Rub Collar for
Crown Rail Sticking
40 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 - 40 -
www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVER 1 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEM
How it Works
Tenoning
Straight Stile and Rail Sticking
Crown Rail Sticking
Brazed Tip Stile & Rail Set (Rail Half) (ease-ment)
Tenoning
Brazed Tip Stile & Rail Set (Stile Half) with eased edge groover.
Stile & Rail Edge
Brazed Tip Stile & Rail Set (Stile Half) with eased edge groover.
Stile & Rail Edge
Crown Rail Sticking
Sticking
Top Rail needs to be rough band sawed (approx. 1/8” larger than finished rail) before crown rail sticking.
May 2018 - 41
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.www.weaver-company.com
Fax 1-913-831-2974 - 41 -
Phone 1-913-831-1800Copyright © 2018 all Rights Reserved
WEAVER1 SHAPER CROWN RAISED PANEL CABINET DOOR SYSTEM
How it Works
Panel Trimming
Panel Raising - Crown Setup
Crown Panel Raising
Panel Trimming
Straight Panel Raising
Panel Trimming Cutter
Panel Stock June need to be rough band sawed (approx. 1/8” larger than finished panel) before crown panel trimming.
Straight Panel Raising
42 - May 2018
4 Shaper House Door SystemRaised Panel Mullion & Glass Mullion Doors
WEAVERHouse Door
Shaper SystemsEntry - Passage - Interior - Exterior
- 43 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 43
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
System comes with cutters, jigs and fixtures, pre set-up with samples -
ready to work.
4 Shaper Crown Panel & Crown Glass Mullion Doors System1
Ph $59,272 - 3 Ph $57,718
Crown Tenon, Sticking & Panel Raising
Straight Sticking
Straight Tenon
Straight Panel Raising
Straight Sticking Shaper1 Ph. $13,881, 3 Ph. $13,481 Straight Tenon Shaper
1 Ph. $12,261, 3 Ph. $11,861
Crown Rail, Panel & Mullion Shaper 1 Ph. $18,915, 3 Ph. $18,528
Straight Panel Raising Shaper 1 Ph. $14,235, 3 Ph. $13,848
WEAVERHouse Door
Shaper SystemsEntry - Passage - Interior - Exterior
Note: In some of our pictures and illustrations the warning discs, dust shields, and some accessories have been removed for better illustration of the cutter and work.
Shaper 5HP (1-1/4” Spindle, 28”x40”top
with Table Top Groove)
The Air Tenon Jig secures the rail with pneumatic clamp and glides on a thin cushion of air making the operation effortless.
Straight Tenon Shaper
Tenon:
TENON GLASS RAIL, MULLION
TENON SOLID PANEL DOOR RAIL, MULLION
Tenon1Note: Other Cutter Profiles Available
44 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved - 44 -
WEAVERHouse Door
Shaper SystemsEntry - Passage - Interior - Exterior
A
B
D
Air Tenon Jig18” Width
Tenon Fence
E
J
G
H
Note: Rail Half for this shaper/operation
STRAIGHT TENON SHAPER Item# Description SH2536 Shaper Large 5 HP 3PH 1-1/4” Spindle 28” x 40” Top SH2X39 Shaper Top Groove 3/8” x 3/4” x 40” AJ1801RW Jig Air Tenon 18” Right with Wings AJXHDM Blow Out Block House Door Mullion (2) AJXTGM Blow Out Block House Door True Glass Mullion FE5640 40” Split Fence PC11-021C-1-3/8 Cutter Set House Door 1-3/8” - Tenon PC11-021C-1-3/4 Cutter Set House Door 1-3/4” - Tenon PC11-021-C-GD-1-3/4 Cutter Set Glass House Door 1-3/8” - 1-3/4” - Tenon SPA600625 Spacer 1-1/4” Bore x 1/16” Thick (2) WD4246 Warning Disc 4-3/4” OD x 1-1/4” ID DS440 Dust Shield 4” for Air Tenon Jig WR6180 Wrench - Bottom all Spindles WR620 Wrench - Top 1-1/4” Spindle ------------------------------------- Straight Tenon Shaper Total:
C
Warning DiscDust Shield
I
Note: Rail Half for this shaper/operation
Spindle Spacers
F
K
Straight Tenon Shaper
Note: Other Cutter Profiles Available
Shaper 5HP (1-1/4” Spindle, 28”x40”top)
with Shaper Top Groove.
Shaper Wrenches
- 45 -
Fax 1-913-831-2974
www.weaver-company.com
May 2014 - 45
RED IN U.S.A.MANUFACTU
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Note: Rail Half for this shaper/operation
Price 6,995 500 1,750 225 225 299 541 541 440
48 n/c 199
49 49
$12,261 $11,861 (1 Phase) - (3 Phase)
WEAVERHouse Door
Shaper SystemsEntry - Passage - Interior - Exterior
Note: In some of our pictures and illustrations the warning discs, dust shields, and some accessories have been removed for better illustration of the cutter and work.
Straight Sticking Shaper
Straight Sticking
This Sticking set up sizes material at the same time it is being shaped. It cuts consistantly and easily.
STICKING GLASS RAILS AND MULLIONS
STICKING SOLID PANEL DOOR RAILS
& MULLIONS.
Note: Other Cutter Profiles Available
STILE AND RAIL STICKING2
46 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved - 46 -
WEAVERHouse Door
Shaper SystemsEntry - Passage - Interior - Exterior
Straight Sticking ShaperShaper 5HP
(1-1/4” Spindle, 28”x40”top)A
General Hold Down - Included w/Sticker Plate
Outfeed Fence in line with cutters
Placement Pins 40”
Sticker Guide Fence
Sticker Spring Guide
Steel Plate
Placement Pins
Steel Sticker SetupH
D
Warning Disc
STRAIGHT STILE & RAIL SHAPER Item# Description SH2536 Shaper - Large 5hp 3ph 1-1/4” Spindle - 28” x 40” Top PF721W 2 Belt 1 Bond Power Feeder Weaver Mount Variable Speed FE361H Large Steel Sticker Setup w/Hold Down FEXSFTG Outfeed Fence Block - Glass FEXSSTGMB1P Sticker Spacer Board - True Glass Mullion - 1st Pass FEXSSTGMB1P Sticker Spacer Board - True Glass Mullion - 2nd Pass PC11-021-P-1-3/8 Cutter Set House Door 1-3/8” - Sticking PC11-021-P-1-3/4 Cutter Set House Door 1-3/4” - Sticking PC11-021-P-GD-1-3/4 Cutter Set Glass House Door 1-3/8” - 1-3/4” - Sticking SPA600625 Spacer 1-1/4” Bore x 1/16” Thick WD4086 Warning Disc 4-1/4” OD x 1-1/4” ID DS450 Dust Shield 4” for Stiles -------------------------------------------- Straight Sticking Shaper Total:
Note: Stile Half for this shaper/operation
Weaver Variable Speed Belt Power Feeder
Dust Shield
Spindle Spacers
Sticker Plate Outfeed Fence - Glass.
E
Sticking Spacer Boards for 1st and 2nd Pass Glass.
F
G
I
J K
- 47 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 47
ACTURED IN U.S.A.MANUF
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Price
6,995 2,995
1,169 239
79239
541 541
440
44 NC 199
$13,881 $13,481 (1 Phase) - (3 Phase)
CNote: Stile Half for this shaper/operation
Note: Stile Half for this shaper/operation
B
Note: Other Cutter Profiles Available
WEAVERHouse Door
Shaper SystemsEntry - Passage - Interior - Exterior
Note: In some of our pictures and illustrations the warning discs, dust shields, and some accessories have been removed for better illustration of the cutter and work.
Straight Panel Raising Shaper
STRAIGHT PANEL RAISING3
The Power Feeder and Guides ensure the work is accurate.
Straight Raised Panels
Double Raised Panels 1” Stock
Back to Back Raised Panels 5/8” Stock
Note: Other Cutter Profiles Available
48 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved - 48 -
WEAVERHouse Door
Shaper SystemsEntry - Passage - Interior - Exterior
STRAIGHT PANEL RAISING SHAPER STRAIGHT PANEL RAISING SHAPER
Straight Panel Raising Shaper
Raised Panel Dust Shield
Warning Disc
Panel Raisier PlateD
G
I
KJ
STRAIGHT PANEL RAISING SHAPER Item# Description SH2736 Shaper - Large 7-1/2 HP 3PH 1-1/4” Spindle - 28” x 40” Top SHXPL02 Steel Plate Panel Raising - 1/4” for Large Top PGD2.25X40X1 Panel Guides Panels Double 2-1/4” X 40” X 1” Thick Panels PGS2.25X40 Panel Guides Single 1-1/4” X 40” LRHX-305-SA Raised Panel Cutter - Single Raise LRHX-305-SB-BB Double 1 “ Panel Raiser 1-1/4” Bore BB2086 Ball Bearing Rub Collar 2-1/4” OD x 1-1/4” ID (2) SPA125 Adjustable Spacer 1-1/4” Bore HD3103 Raised Panel Hold Down w/Rim Weaver Mount WD6166 Warning Disc - 6-1/2” OD x 1-1/4” ID PF721W 2 Belt 1 Bond Power Feeder Weaver Mount Variable Speed DS460 Dust Shield 4” Panel Straight Using a Hold Down -------------------------------------------- Straight Panel Raising Shaper Total:
Shaper 7-1/2 HP (1-1/4” Spindle, 28”x40”top)
A
F
Raised Panel Guides - Double Raise 1” Stock w/Bearing
Raised Panel Guides - Single Raise w/Bearing
Note: Other Cutter Profiles Available
Weaver Belt Power Feeder
E
Raised Panel Hold Down HAdjustable Spacer
- 49 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 49
NUFACTURED IN U.S.A.MA
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Price 7,295 375 239
239 565
1,295 78 119
349 n/c
2,995299
$14,235 $13,848 (5HP 1 PH) (7-1/2HP 3 PH)
305-SB Raised Double RaisedPanel Cutters
C
305-SA Raised Panel Cutter -Single Raise
B
Back to Back Raised Panels 5/8” Stock
WEAVERHouse Door
Shaper SystemsEntry - Passage - Interior - Exterior
Note: In some of our pictures and illustrations the warning discs, dust shields, and some accessories have been removed for better illustration of the cutter and work.
Crown Shaper
CROWN STICKING, PANEL RAISING & CURVED END MULLION SHAPER SETUP
PANEL RAISING
Crown Tenon - Solid Panel
Crown Tenon - Glass Panel
TENON
Crown Sticking - Solid Panel
Crown Sticking - Glass Panel
STICKING
Crown Panel Raising
Crown Tenon - Curved Top Glass
Mullion
Crown Sticking - Solid Panel
Crown Panel Raising
CROWN SHAPING WITH THE SHAPERMASTER™ This setup will shape the crown rail, crown panel or curved mullion (Tenon) as the pattern follows the rub collar. The operation is made easier by the Jig gliding on a thin cushion of air.
Note: Other Cutter Profiles Available
4
50 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved - 50 -
Back to Back Raised Panels 5/8” Stock
Double Raised Panels 1” Stock
WEAVERHouse Door
Shaper SystemsEntry - Passage - Interior - Exterior
Crown Shaper
6-1/2” Warning Discs (2)
Dead Collar (2)
Dust Shield forShapermasters
(2)
CROWN SHAPING SETUP Item# Description SH2736 Shaper - Large 7-1/2 HP 3 PH 1-1/4” Spindle - 28” x 40” Top PC11-021 Cutter Set House Door 1-3/8” PC11-021 Cutter Set House Door 1-3/4” PC11-021GP Cutter Set Glass House Door 1-3/8” - 1-3/4” LRHX-305-SA Raised Panel Cutter - Single Raise LRHC-CUTTER Panel Trim Cutter 2-1/4” OD x 1-1/4” Bore LRHX-305-SB-BB Double 1” Panel Recessed for a Ball Bearing Rub Collar 1-1/4” Bore DC20822 Dead Collar 2-1/4” OD x 2-3/4” Tall DC22430 Dead Collar 2-3/4” OD x 3-3/4” Tall FE77 Right Half Of Split Fence w/Depth Bolt AJ3212 Jig-32” X 12” Shapermaster AJXTGM Blow Out Block - True Glass Mullion PA3245 House Door Crown Rail & Panel Plexiglass 32” Patterns PA3246 House Door Oval Rail & Panel Plexiglass 32” Patterns SPA600625 Spacer 1-1/4” Bore x 1/16” Thick (6) SPA125 Adjustable Spacer 1-1/4” Bore (3) WD4246 Warning Disc - 4-1/4” x 1-1/4” ID (6) WD6166 Warning Disc - 6-1/2” OD x 1-1 /4” ID (2) DS457 Dust Shield 4” Crown Rails w/Shapermaster DS467 Dust Shield 4” Crown Panels w/Shapermaster
Crown Shaper Total:
Right Half of Split Fence
Shaper 7-1/2 HP (1-1/4” Spindle, 28”x40”top)
A
T U
R S
E
Shapermaster™ Air Crown Rail & Panel JIg 32” Width
Plexiglass Crown Rail & Panel PatternsPlexiglass Oval Rail & Panel Patterns
Note: Other Cutter Profiles Available
P
Adjustable Spacer (3)
(6)
(6)
(1)
4-1/4” Warning Discs (6)
- 51 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 51
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Trim Cutter 305-SA Single Raised Panel Cutter
Note: Rail Half for Curved Tenon.Note: Rail Half for
Curved Tenon.
Note: Stile Half for Crown Rail.
Note: Stile Half for Crown Rail.
Note: Rail Half for Curved Tenon.
Note: Stile Half for Crown Rail.
O 305-SB Double Raised Panel Cutters
Price 7,295 1,08 2 1,082 880 565 199 1,295 129 129 129 75 2,695 225 895 895 144 357 n/c n/c 233 299
--------------------------------------------
SpindleSpacers
MetalShim Stock
Q
$18,915 $18,528(5HP 1 PH) (7-1/2HP 3 PH)
B C D
GF
H J
I
L
N
Trim Cutter
K
M
WEAVERShaper Essentials™for weaver shapers
52 - May 2018
- 52 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
for weaver shapers - Table of ConTenTs
Shaper Essentials™
Page The Essentials for...
52 Shaper Essentials for Weaver Shapers Table of Contents 53 Crown Panel Trimming ............... Manual Panel Jig 54 .................................................... Manual Coping Jig -Continuous Fence - Trim Table 55 .................................................... Air Tenon Jig - Continuous Fence - Trim Table 56 .................................................... Coping Hold Down - Split Fence 57 .................................................... Air Tenon Jig - Split Fence - Trim Table 58 Tenon .......................................... Coping Hold Down - Continuous Fence 59 .................................................... Air Tenon Jig - Continuous Fence 60 .................................................... Coping Hold Down - Split Fence 61 .................................................... Air Tenon Jig - Split Fence 62 Stile & Rail Sticking .................... Sticker Plate with Hold Down 63 .................................................... Sticker Plate & Power Feeder 64 .................................................... Crown Rail Sticking - Manual Setup 66 .................................................... Sticker Guide & Fence with Hold Down 67 .................................................... Sticker Guide & Fence with Power Feeder 68 Panel Raising .............................. Single Raise with Hold Down 69 .................................................... Single Raise with Hold Down & Power Feeder 70 .................................................... Partial Offset with Hold Down 71 .................................................... Partial Offset with Hold Down & Power Feeder 72 Crown Rail &Panel Trimming .... Shapermaster™ Air Jig - Dead Collar 73 .................................................... Shapermaster™ Air Jig - Bearing 74 Crown Panel Raising .................. Shapermaster™ Air Jig - Dead Collar 75 .................................................... Shapermaster™ Air Jig - Bearing 76 Crown Rail Sticking .................... Shapermaster™ Air Jig - Dead Collar 77 .................................................... Shapermaster™ Air Jig - Bearing 78 Door Edge .................................. Continuous Fence 79 .................................................... Split Fence
WEAVER Shaper Essentials™for weaver shapers
- 53 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 53
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Page The Essentials for...
Panel Trimming
Panel Trimming
Panel Stock June need to be rough band sawed (approx. 1/8” larger than finished panel) before crown panel trimming.
Hardwood Panel Pattern Set
Pan
el T
rimm
ing
Edg
e
Crown Panel TrimmingManual Jig
Panel Trimming Setup - Manual Jig - For Weaver Shaper Item# Description Price JM310 Manual Crown Panel Jig 495 PA427 Hardwood Patterns - 1-1/2” Crown Panel 265 FRE8389 Panel Trimming Cutter 2W Carbide Square Edge 249 BB Ball Bearing Rub Collar 89 DS472 Dust Shield for Panel Trimming 199 WD Warning Disc 35 ---------- $1,332 Dust Shield
Crown Panel Jig
Warning Disc
Warning Disc
Stock
Dust Shield
Ball Bearing Rub Collar
Stock
Ball BearingRub Collar
Crown Panel Jig
Pattern
Pattern
Cutter
Cutter
WEAVERShaper Essentials™for weaver shapers
54 - May 2018
- 54 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Hardwood Panel Pattern Set
Pan
el T
rimm
ing
Edg
e
Cutter
Cutter
Example Profiled Stock - Face Down - Tenon
Crown Panel TrimmingManual Coping Jig - Continuous Fence - Trimming Table
Panel Trimming Setup - Continuous Fence Manual Jig - Trimming Table - For Weaver Shaper Item# Description Price FE365 Panel Trimming Table 349 FE25 Tenon Fence 269 HD225W Coping Hold Down 439 JM310 Manual Crown Panel Jig 495 PA427 Hardwood Patterns - 1-1/2” Crown Panel 265 FRE8389 Panel Trimming Cutter 2W Carbide Square Edge 249 BB Ball Bearing Rub Collar 89 DS Dust Shield for Panel Trimming 199 WD Warning Disc (Trimming) 35 WD Warning Disc (Tenon) 35
---------- $ 2,424Dust Shield
Crown Panel Jig
Warning Disc
Warning Discs
Stock
Dust Shield
Ball Bearing Rub Collar
Stock
Ball BearingRub Collar
Crown Panel Jig
Pattern
Pattern
Warning Disc
Panel Trimming Table Coping Hold Down
Panel Trim
ming Table
Panel Trimming
Panel Stock June need to be rough band sawed (approx. 1/8” larger than finished panel) before crown panel trimming.
Tenon Fence
Panel Trimming
Tenoning
WEAVER Shaper Essentials™for weaver shapers
- 55 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 55
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Pan
el T
rimm
ing
Edg
e
Cutter
Example Profiled Stock - Face Down - Tenon
Hardwood Panel Pattern Set
Crown Panel TrimmingAir Tenon Jig - Continuous Fence - Trimming Table
Panel Trimming Setup - Continuous Fence Air Tenon Jig - Trimming Table - For Weaver Shaper Item# Description Price FE365 Panel Trimming Table 349 FE27 Tenon Fence 269 AJ1201RW Air Tenon Jig 1,195 JM310 Manual Crown Panel Jig 495 PA427 Hardwood Patterns - 1-1/2” Crown Panel 265 FRE8389 Panel Trimming Cutter 2W Carbide Square Edge 249 BB Ball Bearing Rub Collar 89 DS Dust Shield for Tenon & Panel Trimming 199 WD Warning Disc (Trimming) 35 WD Warning Disc (Tenon) 35
---------- $ 3,180
Panel Trimming
Panel Stock June need to be rough band sawed (approx. 1/8” larger than finished panel) before crown panel trimming.
Dust Shield
Crown Panel Jig
Warning Disc
Warning Discs
Stock
Dust Shield
Ball Bearing Rub Collar
Stock
Ball BearingRub Collar
Crown Panel JigPattern
Pattern
Warning Disc
Panel Trimming Table
Air Tenon Jig
Panel Trim
ming Table
Tenon Fence
Cutter
Panel Trimming
Tenoning
WEAVERShaper Essentials™for weaver shapers
56 - May 2018
- 56 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Hardwood Panel Pattern Set
Pan
el T
rimm
ing
Edg
e
Panel Trimming
Panel Stock June need to be rough band sawed (approx. 1/8” larger than finished panel) before crown panel trimming.
Example Profiled Stock - Face Down - Tenon
Crown Panel TrimmingManual Coping Jig - Split Fence - Trimming Table
Panel Trimming Setup - Split Fence Manual Jig - Trimming Table - For Weaver Shaper Item# Description Price FE365 Panel Trimming Table 349 FE53 Tenon Fence 269 HD225W Coping Hold Down 439 JM310 Manual Crown Panel Jig 495 PA427 Hardwood Patterns - 1-1/2” Crown Panel 265 FRE8389 Panel Trimming Cutter 2W Carbide Square Edge 249 BB Ball Bearing Rub Collar 89 DS Dust Shield for Panel Trimming 199 WD Warning Disc (Trimming) 35 WD Warning Disc (Tenon) 35
---------- $2,424Dust Shield
Crown Panel Jig
Warning Disc
Warning Discs
Stock
Dust Shield
Ball Bearing Rub Collar
Stock
Ball BearingRub Collar
Crown Panel Jig
Pattern
Pattern
Warning Disc
Panel Trimming Table Coping Hold Down
Panel Trim
ming Table
Tenon Fence
Cutter
Cutter
Panel Trimming
Tenoning
WEAVER Shaper Essentials™for weaver shapers
- 57 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 57
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Pan
el T
rimm
ing
Edg
e
anel TrimmingP
Panel Stock June need to be rough band sawed (approx. 1/8” larger than finished panel) before crown panel trimming.
Example Profiled Stock - Face Down - Tenon
Hardwood Panel Pattern Set
Crown Panel TrimmingAir Tenon Jig - Split Fence - Trimming Table
Panel Trimming Setup - Split Fence Air Tenon Jig - Trimming Table - For Weaver Shaper Item# Description Price FE365 Panel Trimming Table 349 FE53 Tenon Fence 269 AJ1201RW Air Tenon Jig 1,195 JM310 Manual Crown Panel Jig 495 PA427 Hardwood Patterns - 1-1/2” Crown Panel 265 FRE8389 Panel Trimming Cutter 2W Carbide Square Edge 249 BB Ball Bearing Rub Collar 89 DS Dust Shield for Panel Trimming 199 WD Warning Disc (Trimming) 35 WD Warning Disc (Tenon) 35
---------- $ 3,180Dust Shield
Crown Panel Jig
Warning Disc
Warning Discs
Stock
Dust Shield
Ball Bearing Rub Collar
Stock
Ball BearingRub Collar
Crown Panel Jig
Pattern
Pattern
Warning Disc
Panel Trimming Table
Air Tenon Jig
Panel Trim
ming Table
Tenon Fence
Cutter
Cutter
Panel Trimming
Tenoning
WEAVERShaper Essentials™for weaver shapers
58 - May 2018
- 58 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Tenoning
Tenoning
Tenon
Example Profiled Stock - Face Down
Coping Hold Down - Continuous Fence
Dust Shield
Dust Shield
Tenon Fence
Manual Coping Jig
Manual Coping Jig
Warning Disc
Tenon Fence
Warning Disc
Tenon Setup - Continuous Fence Coping Hold Down - For Weaver Shaper Item# Description Price HD225W Coping Hold Down 439 FE25 Tenon Fence 269 WD Warning Disc 35 DS441 Dust Shield 199 ----------- $ 942
WEAVER Shaper Essentials™for weaver shapers
- 59 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 59
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Tenoning
Tenoning
Tenon
Example Profiled Stock - Face Down
Air Tenon Jig - Continuous Fence
Tenon Setup - Continuous Fence Coping Hold Down - For Weaver Shaper Item# Description Price HD225W Coping Hold Down 295 FE25 Tenon Fence 179 WD Warning Disc 23 DS441 Dust Shield 125 ----------- $ 622
Dust Shield
Dust Shield
Tenon Fence
Air Tenon Jig
Air Tenon Jig
Warning Disc
Tenon Fence
Warning Disc
Tenon Setup - Continuous Fence - Air Tenon Jig - For Weaver Shaper Item# Description Price AJ1201RW Air Tenon Jig 1,195 FE27 Tenon Fence 269 WD Warning Disc 35 DS441 Dust Shield 199
---------- $1,698
WEAVERShaper Essentials™for weaver shapers
60 - May 2018
- 60 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Tenoning
Tenoning
Example Profiled Stock - Face Down
TenonCoping Hold Down - Split Fence
Dust Shield
Dust Shield
Tenon Fence
Manual Coping Jig
Manual Coping Jig
Warning Disc
Tenon Fence
Warning Disc
Tenon Setup - Split Fence - Coping Hold Down - For Weaver Shaper Item# Description Price HD225W Coping Hold Down 439 FE5628 Tenon Fence 269 WD Warning Disc 35 DS441 Dust Shield 199 ----------- $ 942
WEAVER Shaper Essentials™for weaver shapers
- 61 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 61
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Tenoning
Tenoning
Example Profiled Stock - Face Down
TenonAir Tenon Jig - Split Fence
Tenon Setup - Split Fence - Coping Hold Down - For Weaver Shaper Item# Description Price HD225W Coping Hold Down 295 FE5628 Tenon Fence 179 WD Warning Disc 23 DS441 Dust Shield 125 ----------- $ 622
Dust Shield
Dust Shield
Tenon Fence
Air Tenon Jig
Air Tenon Jig
Warning Disc
Tenon Fence
Warning Disc
Tenon Setup - Split Fence - Air Tenon Jig - For Weaver Shaper Item# Description Price AJ1201RW Air Tenon Jig 1,195 FE5628 Tenon Fence 269 WD Warning Disc 35 DS441 Dust Shield 199
---------- $1,698
WEAVERShaper Essentials™for weaver shapers
62 - May 2018
- 62 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Straight Stile and Rail Sticking
Stile & Rail Edge
Sticking
Example Profiled Stock - Face Down.
Stile & Rail StickingSticker Plate with Hold Down
Straight Sticking Setup - For Weaver Shaper - Sticker Plate Item# Description Price FE360H Sticker Plate Setup w/Hold Down 869 BBRC Ball Bearing Rub Collar 89 DS455 Dust Shield 199 WD Warning Disc 35 ---------- $1,192
Dust Shield
Stock
Stock
Warning Disc
Sticker Spring Guide on Sticker
Plate
Hold Down
Spacer Board
Sticker Guide Fence
on Sticker Plate
Spacer Board
Warning Disc
Dust Shield
Sticker Spring Guide on Sticker Plate
Sticker Guide Fence
on Sticker Plate
Steel Sticker P
late
Steel Sticker Plate
Ball BearingRub Collar
WEAVER Shaper Essentials™for weaver shapers
- 63 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 63
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Straight Stile and Rail Sticking
Stile & Rail Edge
Sticking
Example Profiled Stock - Face Down.
Sticker Plate & Power FeederStraight Stile & Rail Sticking
Straight Sticking Setup - For Weaver Shaper - Sticker Plate Item# Description Price FE360H Sticker Plate Setup w/Hold Down 869 PF721W Weaver Variable Speed Power Feeder 2,995 BBRC Ball Bearing Rub Collar 89 DS455 Dust Shield 199 WD Warning Disc 35
---------- $ 4,187
Dust Shield
Stock
Stock
Warning Disc
Sticker Spring Guide
on Sticker Plate
Power Feeder
Spacer Board
Sticker Guide Fence
on Sticker Plate
Spacer BoardWarning Disc
Power Feeder
Sticker Spring Guide on Sticker Plate
Sticker Guide Fence
on Sticker Plate
Steel Sticker P
late
Steel Sticker Plate
Ball BearingRub Collar
Dust Shield
WEAVERShaper Essentials™for weaver shapers
64 - May 2018
- 64 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 20148 all Rights Reserved
Crown Rail Sticking
Stile & Rail Set (Stile Half) with eased edge groover.
Stile & Rail Edge
Crown Rail Sticking
Top Rail needs to be rough band sawed (approx. 1/8” larger than finished rail) before crown rail sticking.
Crown Rail Patterns
Crown Rail Sticking Setup - Manual Jig - For Weaver Shapers Item# Description Price BBRC Ball Bearing Rub Collar 89 PA427 Hardwood Patterns 1-1/2” Crown Rail 265 JM330 Crown Rail Jig 465 DS455 Dust Shield for Curved & Straight Rail 199 WD Warning Disc 35 --------- $1,053
Crown Rail StickingManual Setup
Dust Shield
Dust Shield
Crown Rail Jig
Crown Rail Jig
Warning Disc
Ball Bearing Rub Collar
Pattern
Warning Disc
Pattern
Ball Bearing Rub Collar
Stock
Stock
May 2018 - 65
WEAVERShaper Essentials™for weaver shapers
66 - May 2018
- 66 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Straight Stile and Rail Sticking
Stile & Rail Edge
Sticking
Example Profiled Stock - Face Down.
Straight Sticking Setup - For Weaver Shaper - Guide & Fence Item# Description Price FE211 Sticker Spring Guide 329 FE213H Sticker Guide Fence with Hold Down 359 DS455 Dust Shield 199 WD Warning Disc 35 ---------- $ 922
Straight Stile & Rail StickingSticker Guide & Fence with Hold Down
Dust Shield
Stock
Stock
Warning Disc
Sticker Spring Guide
Hold Down
Spacer Board
Sticker Guide Fence
Spacer Board
Warning Disc
Dust Shield
Sticker Spring Guide
Sticker Guide Fence
WEAVER Shaper Essentials™for weaver shapers
- 67 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 67
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Straight Stile and Rail Sticking
Stile & Rail Edge
Sticking
Example Profiled Stock - Face Down.
Straight Sticking Setup - For Weaver Shaper - Guide & Fence Item# Description Price FE211 Sticker Spring Guide 329 FE213H Sticker Guide Fence with Hold Down 359 PF721W Weaver Variable Speed Power Feeder 2,995 DS450 Dust Shield 199 WD Warning Disc 35
---------- $ 3,917
Sticker Guide & Fence with Power FeederStraight Stile & Rail Sticking
Straight Sticking Setup - For Weaver Shaper - Guide & Fence Item# Description Price FE211 Sticker Spring Guide 219 FE213H Sticker Guide Fence with Hold Down 239 DS455 Dust Shield 125 WD Warning Disc 23 ---------- $ 606
Dust Shield
Stock
Stock
Warning Disc
Sticker Spring Guide
Power Feeder
Spacer Board
Sticker Guide Fence
Spacer BoardWarning Disc
Power Feeder
Sticker Spring Guide
Sticker Guide Fence
WEAVERShaper Essentials™for weaver shapers
68 - May 2018
- 68 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Panel Raising - Crown Setup
Crown Panel Raising
Panel Raising Setup - Single Raise with Hold Down - For Weaver Shaper Item# Description Price FE20 Raised Panel Guides 209 HD3100 Raised Panel Hold Down 349 DS465 Dust Shield for Raised Panel 299 BBRC Ball Bearing Rub Collar 89 WD Warning Disc 39 --------- $ 985
Panel RaisingSingle Raise with Hold Down
Dust Shield
Guides
Warning Disc
Warning Disc
Raised PanelHold Down
Stock
Dust Shield
Dust Shield
Warning Disc
Raised PanelHold Down Stock
Guide: Infeed Side(Outfeed side removed for crown)
GuidesRaised PanelHold Down
Ball BearingRub Collar
Crown Panel Raising:
Straight Panel Raising:
WEAVER Shaper Essentials™for weaver shapers
- 69 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 69
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Panel Raising - Crown Setup
Crown Panel Raising
Panel Raising Setup - Single Raise with Hold Down - For Weaver Shaper Item# Description Price PF721W Weaver Variable Speed Power Feeder 2,995 FE20 Raised Panel Guides 209 HD3100 Raised Panel Hold Down 349 DS465 Dust Shield for Raised Panel 299 BBRC Ball Bearing Rub Collar 89 WD Warning Disc 39 --------- $3,980
Panel RaisingSingle Raise with Hold Down & Power Feeder
Dust Shield
Guides
Warning Disc
Warning Disc
Raised PanelHold Down
Stock
Power Feeder
Dust Shield
Warning Disc
Raised PanelHold Down
Stock
Guide: Infeed Side(Outfeed side removed for crown)
Guides
Raised PanelHold Down
Ball BearingRub Collar
Crown Panel Raising: Power Feeder Lited Up.
Straight Panel Raising: Power Feeder in Working Position
Power Feeder
Power Feeder
WEAVERShaper Essentials™for weaver shapers
70 - May 2018
- 70 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Crown Panel Raising
Panel Raising - Crown Setup
Panel Raising Setup - Partial Offset with Hold Down - For Weaver Shaper Item# Description Price FE200 Offset Raised Panel Guides 249 HD3100 Raised Panel Hold Down 349 DS465 Dust Shield for Raised Panel 299 BBRC Ball Bearing Rub Collar 89 WD Warning Disc 39 --------- $1,025
Panel RaisingPartial Offset with Hold Down
Dust Shield
Guides
Warning Disc
Warning Disc
Raised PanelHold Down
Stock
Dust Shield
Dust Shield
Warning Disc
Raised PanelHold Down
Stock
Guide: Infeed Side(Outfeed side removed for crown)
Guides
Raised PanelHold Down
Ball BearingRub Collar
Crown Panel Raising:
Straight Panel Raising:
WEAVER Shaper Essentials™for weaver shapers
- 71 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 71
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Crown Panel Raising
Panel Raising - Crown Setup
Panel Raising Setup - Partial Offset with Hold Down - For Weaver Shaper Item# Description Price PF721W Weaver Variable Speed Power Feeder 2,995 FE200 Offset Raised Panel Guides 249 HD3100 Raised Panel Hold Down 329 DS465 Dust Shield for Raised Panel 299 BBRC Ball Bearing Rub Collar 89 WD Warning Disc 39
--------- $ 4,020
Panel RaisingPartial Offset with Hold Down & Power Feeder
Dust Shield
Guides
Warning Disc
Warning Disc
Raised PanelHold Down
Stock
Power Feeder
Dust Shield
Warning Disc
Raised PanelHold Down
Stock
Guide: Infeed Side(Outfeed side removed for crown)
Guides
Raised PanelHold Down
Ball BearingRub Collar
Crown Panel Raising: Power Feeder Lited Up.
Straight Panel Raising: Power Feeder in Working Position
Power Feeder
Power Feeder
WEAVERShaper Essentials™for weaver shapers
72 - May 2018
- 72 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Panel Trimming
Plexiglass Rail & Panel Pattern Set
Rail & Panel Trimming
Rail & Panel Trimming Setup - Air Jig - For Weaver Shaper Item# Description Price AJ2402 Shapermaster 24” x 12” 1,995 PA2417 Plexiglass Patterns - 1-1/2” Crown Rail & Panel 379 FRE9936V Trimming Cutter (stacked square edge) 365 DC Double OD Trimming Dead Collar 149 FE77 Right Half of Split Fence with Depth Bolt 119 DS470 Dust Shield for Rail & Panel Trimming with Shapermasters 199 WD4086 Warning Disc 4-1/ 4”ODx1-1/4”ID 35
---------- $ 3,241
Crown Rail & Panel TrimmingShapermaster™ Air Jig - Dead Collar
Dust Shield
Warning Disc
Warning Disc
Stock
Dust Shield
Dead Collar
Stock
Fence Right Half of Split Fence with Depth Bolt
Shapermaster Air Jig
Pattern
Pattern
Fence Right Half of Split Fence with Depth Bolt
Shapermaster Air Jig
Cutter
Cutter
Dead Collar
WEAVER Shaper Essentials™for weaver shapers
- 73 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 73
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Panel Trimming
Plexiglass Rail & Panel Pattern Set
Rail & Panel Trimming
Rail & Panel Trimming Setup - Air Jig - For Weaver Shaper Item# Description Price AJ2402 Shapermaster 24” x 12” 1,995 PA2417 Plexiglass Patterns - 1-1/2” Crown Rail & Panel 379 C9936V Trimming Cutter (stacked square edge) 365 BB3146 Ball Bearing Rub Collar 3-7/16” x 1-1/4” Rail 89 BB3126 Ball Bearing Rub Collar 3-3/8” x 1-1/4” Panel 89 FE77 Right Half of Split Fence with Depth Bolt 119 DS470 Dust Shield for Rail & Panel Trimming with Shapermasters 199 WD4086 Warning Disc 4-1/ 4”ODx1-1/4”ID 35
---------- $3,270
Crown Rail & Panel TrimmingShapermaster™ Air Jig - Bearing
Dust Shield
Warning Disc
Warning Disc
Stock
Dust Shield
Ball Bearing Rub Collar
Stock
Fence Right Half of Split Fence with Depth Bolt
Ball BearingRub Collar
Shapermaster Air Jig
Pattern
Pattern
Fence Right Half of Split Fence with Depth Bolt
Shapermaster Air Jig
Cutter
Cutter
WEAVERShaper Essentials™for weaver shapers
74 - May 2018
- 74 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Plexiglass Rail & Panel Pattern Set
rown Panel RaisingC
Crown Panel Raising Setup -Air Jig - For Weaver Shaper
Item# Description
AJ2402 Shapermaster 24” x 12”PA2417 Plexiglass Patterns -
1-1/2” Crown Rail & PanelDC Dead Collar
FE78 Right Half of Split FenceDS470 Dust Shield for Rail & Panel
with ShapermastersWD6086 Warning Disc 6-1/ 4”ODx1-1/4”ID
Price
1,995
379129119
19939
---------- $ 2,860
Example Profiled Stock - Face Up.
Crown Panel RaisingShapermaster™ Air Jig - Dead Collar
Dust Shield
Warning Disc
Warning Disc
Stock
Dust Shield
DeadCollar
Stock
Fence Right Half of Split Fence
Dead Collar
Shapermaster Air Jig
Pattern
Pattern
Fence Right Half of Split Fence with Depth Bolt
Shapermaster Air Jig
Note: Panel Pattern Set for Crown Panel operation
Crown Panel Raising
WEAVER Shaper Essentials™for weaver shapers
- 75 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 75
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Plexiglass Rail & Panel Pattern Set
Crown Panel Raising
Crown Panel Raising Setup -Air Jig - For Weaver Shaper
Item# Description
AJ2402 Shapermaster 24” x 12”PA2417 Plexiglass Patterns -
1-1/2” Crown Rail & PanelBBRC Ball Bearing Rub Collar
FE78 Right Half of Split FenceDS470 Dust Shield for Rail & Panel
with ShapermastersWD6086 Warning Disc 6-1/ 4”ODx1-1/4”ID
Price
1,995
37989
119
19939
---------- $ 2,820
Example Profiled Stock - Face Up.
Crown Panel RaisingShapermaster™ Air Jig - Bearing
Stock
Dust Shield
Warning Disc
Warning Disc
Stock
Dust Shield
Ball Bearing Rub Collar
Stock
Fence Right Half of Split Fence
Ball BearingRub Collar
Shapermaster Air Jig
Pattern
Pattern
Fence Right Half of Split Fence with Depth Bolt
Shapermaster Air Jig
Note: Panel Pattern Set for Crown Panel operation
Crown Panel Raising
WEAVERShaper Essentials™for weaver shapers
76 - May 2018
- 76 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Plexiglass Rail & Panel Pattern Set
Crown Rail Sticking Setup - Air Jig - For Weaver Shaper Item# Description AJ2402 Shapermaster 24” x 12” PA2417 Plexiglass Patterns - 1-1/2” Crown Rail & Panel DC Dead Collar FE78 Right Half of Split Fence DS470 Dust Shield for Rail & Panel with Shapermasters WD4086 Warning Disc 4-1/ 4”ODx1-1/4”ID
Price
1,995
379 129 119
19935
---------- $ 2,856
Crown Rail Sticking
Crown Rail StickingShapermaster™ Air Jig - Dead Collar
Dust Shield
Warning Disc
Warning Disc
Stock
Dust Shield
Dead Collar
Stock
Fence Right Half of Split Fence
Dead Collar
Shapermaster Air Jig
Pattern
Pattern
Fence Right Half of Split Fence
Shapermaster Air Jig
Note: Rail Pattern Set for Crown Rail operation.
Crown Rail Sticking
WEAVER Shaper Essentials™for weaver shapers
- 77 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 77
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Plexiglass Rail & Panel Pattern Set
Crown Rail Sticking
Crown Rail Sticking Setup - Air Jig - For Weaver Shaper Item# Description AJ2402 Shapermaster 24” x 12” PA2417 Plexiglass Patterns - 1-1/2” Crown Rail & Panel BBRC Ball Bearing Rub Collar FE78 Right Half of Split Fence DS470 Dust Shield for Rail & Panel with Shapermasters WD4086 Warning Disc 4-1/ 4”ODx1-1/4”ID
Price
1,995
37989
119
19935
---------- $ 2,816
Example Profiled Stock - Face Down.
Crown Rail StickingShapermaster™ Air Jig - Bearing
Dust Shield
Warning Disc
Warning Disc
Stock
Dust Shield
Ball Bearing Rub Collar
Stock
Fence Right Half of Split Fence
Ball BearingRub Collar
Shapermaster Air Jig
Pattern
Pattern
Fence Right Half of Split Fence
Shapermaster Air Jig
Note: Rail Pattern Set for Crown Rail operation.
Crown Rail Sticking
WEAVERShaper Essentials™for weaver shapers
78 - May 2018
- 78 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Doo
r Edg
e
Door Edge - Continuous Fence
Continuous Fence
Door Edge Setup - Continuous Fence - For Weaver Shapers - (face up) Item# Description Price FEDE Continuous Door Edge Fence 40” 299 HD3150 General Hold Down 299 HD222 Drawer Ends Hold Down 299 DS480 Dust Shield for Door Edge 299 WD Warning Disc 35 --------- $1,231
Door EdgeContinuous Fence
Dust Shield
Drawer Front Jig
FenceWarning Disc
Warning Disc
Hold Down
Stock
Dust Shield
Dust Shield
Warning Disc
Hold Down Stock
Fence
Fence
groove in shaper top
Hold Down
groove in sh
aper top
WEAVER Shaper Essentials™for weaver shapers
- 79 -
Fax 1-913-831-2974www.weaver-company.com
May 2018 - 79
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Doo
r Edg
e
Door Edge - Split Fence
Door EdgeSplit Fence
Door Edge Setup - Split Fence - For Weaver Shapers - (for full edge) Item# Description Price FE5640 Split Door Edge Fence w/Dual Adj. 299 HD3150 General Hold Down 299 HD222 Drawer Ends Hold Down 299 DS482 Dust Shield for Door Edge 299 WD Warning Disc 35 --------- $1,231 Dust Shield
Drawer Front Jig
Fence
Warning Disc
Warning Disc
Hold Down
Stock
Dust Shield
Dust Shield
Warning Disc
Hold Down Stock
Fence
Fence
Hold Down
groove in shaper top
groove in sh
aper top
80 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - Kansas City, KS 66106 USA
Phone 1-913-831-1800 Fax 1-913-831-2974
WEAVERSHAPER CUTTERSTable of Contents
Page Cutter 80 Shaper Cutters Table of Contents 81 Raised Panel Cutters .................... 5/8” Single Raise or 3/4” with Partial Back Raise - Freeborn 82 ...................................................... 3/4” Panels, 1/2” Panels - Freeborn 83 ...................................................... 5/8” Panels Single Raise or 3/4” with Partial Back Raise - Insert Heads/Tips- Freeborn 84 ...................................................... 3/4” Panels - Insert Heads/Tips- Freeborn 85 ...................................................... 5/8” Single Raise or 3/4” with Partial Back Raise - Byrd 86 ...................................................... 5/8” Panels Single Raise or 3/4” with Partial Back Raise 87 ...................................................... Shaker Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Freeborn 88 ...................................................... Shaker Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Byrd 87 Cabinet Door Stile & Rail Sets ..... Shaker Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Freeborn 88 ...................................................... Shaker Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Byrd 89 ...................................................... Cabinet Door Sets - Easement - Byrd 90 ...................................................... Cabinet Door Glass Sets - Easement - Byrd 91 ...................................................... Shaker Cabinet Door Sets, 5/8” or 1/2” Shaker Panel - Byrd 92 ...................................................... Cabinet Door Sets - Easement - Freeborn 93 ...................................................... Cabinet Door Sets - Freeborn 94 ...................................................... Cabinet Door Sets - Easement Brazed Tenon/Insert Stile - Freeborn 95 ...................................................... Cabinet Door Sets - Brazed Tenon/Insert Stile - Freeborn 96 ...................................................... Cabinet Door Sets - Easement Insert Cutters - Freeborn 97 ...................................................... Cabinet Door Sets - Insert Cutters - Freeborn 98 ...................................................... Cabinet Door Sets - Insert Cutters - Multiple Profile - Eased, Non-Eased- Freeborn 99 ...................................................... Cabinet Door Sets - Braised Tip - Easement 100 ...................................................... Cabinet Door Sets - Braised Tip 101 ...................................................... Cope & Pattern, Window Sash - Freeborn
112 House Door Stile & Rail Sets .........1-3/8”-1-3/4” Stock - Freeborn 114 2-1/4” Stock - Freeborn 116 1-3/8”-1-3/4” Glass - Freeborn 118 2-1/4” Glass - Freeborn 120 Raised Panel Cutters .....................Stehle “While Supplies Last!” 122 Square Edge Cutters ......................Stehle “While Supplies Last!” 123 Square Edge & Bevel Cutters ........Stehle “While Supplies Last!” 124 Drawer Cutters ...............................Stehle “While Supplies Last!” 125 Detail Cutters .................................Stehle “While Supplies Last!” 126 V-Panelling Cutters .........................Stehle “While Supplies Last!” 127 Convex Half Round Cutters............Stehle “While Supplies Last!” 129 Concave Half Round Cutters .........Stehle “While Supplies Last!”
102 Door Edge Cutters .........................Profiles - Byrd 103 .......................................................Profiles - Freeborn 107 Door Edge Detail, Reversible ........Profiles - Freeborn 108 Rounds & Groovers .......................Profiles - Freeborn 109 Easing Sets ....................................Profiles - Freeborn 110 Glue Joint, Flooring .......................Profiles - Freeborn
129 Multiform Deluxe Slip Stone .......... 130 Convex Quarter Round Cutters .....Stehle “While Supplies Last!” 131 Concave Quarter Round Cutters ...Stehle “While Supplies Last!” 132 3/4” Bore 2 Wing Cutters ...............Stehle “While Supplies Last!”
133 HSS House Door Cutters ...............Stehle “While Supplies Last!” 134 Molding Cutters .............................Stehle “While Supplies Last!” 136 Cutter Accessories ........................Ball Bearing Rub Collars, Warning Disc, Spacers, Shims 138 .......................................................T-Bushings, Spacers, Shims
- 81 -
Fax 1-913-831-2974
www.weaver-company.com
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Page Cutter
WEAVERRaised Panel Cutters
IPAGES-CU-RP-BT-FIPAGES-CU-RP-BT-F
May 2018 - 81
Manufactured In U.S.A.
Bore 3/4" Carbide 11/4" Carbide 11/4" T-Alloy
Price Each$259$304$335
Bore 3/4" Carbide 11/4" Carbide 11/4" T-Alloy
Price Each$189$223$245
PC means 11/4" bore, CarbidePT means 11/4" bore T-AlloyMC means 3/4" bore carbide
82 - May 2018
- 82 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERManufactured
In U.S.A. Raised Panel Cutters
Bore 3/4" Carbide 11/4" Carbide 11/4" T-Alloy
Price Each$259$304$335
Bore 11/4" Carbide 11/4" T-Alloy
Price Each$304$335
Pro Line: 11/4" bore 3" Bearing P-Pro Line, C-Carbide, T-T-alloy
PC means 11/4" bore, CarbidePT means 11/4" bore T-AlloyMC means 3/4" bore carbide
65/8" OD61/2" OD
- 83 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 83
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVERRaised Panel Cutters
IPAGES-CU-RP-BT-FIPAGES-CU-RP-BT-F
Manufactured In U.S.A.
Bore 11/4" Carbide 11/4" T-Alloy
Price Each$325$350
Bore 11/4" Carbide 11/4" T-Alloy
Price Each$255$270
IC means 11/4" bore, CarbideIT means 11/4" bore T-Alloy
Insert Heads & Tips
Runs with any 15 series raised panel cuttersto cut 3/4” panels.
84 - May 2018
- 84 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERManufactured
In U.S.A. Raised Panel Cutters
Bore 11/4" Carbide 11/4" T-Alloy
Price Each$325$350
IC means 11/4" bore, CarbideIT means 11/4" bore T-Alloy
Insert Heads & Tips
- 85 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 85
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Bore Price Each11/4" Carbide $31711/4" T-Alloy $317
Tip and Gib must be held securely against the seat & Stop Screw when
tightening the Gib Screw
Item# Description Set of 3 PriceBYRD-P201LHS Scoop Insert Tips $93BYRD-P202LHS Ogee Insert Tips $93BYRD-P203LHS Bevel Insert Tips $93BYRD-P204LHS Bevel Round Insert Tips $93BYRD-P205LH Scoop Insert Tips $93
BYRD-PRBLH Partial Under Raiser Insert Tips $33
Manufactured In U.S.A.
Raised Panel Carbide Insert Tips
Raised Panel Insert Cutter Heads
Item# Description Price
BYRD-LHPANEL Raised Panel Insert Cutter w/tips $335BYRD-LHPART Raised Panel Partial Insert Cutter w/tips $184
Counterclockwise Face Up - 11/4" Bore - 6" Outside Diameter. - 23/4" Minor Diameter
3/4" Stock with Partial Under Raiser: Byrd-LH-PANEL Cutter Head with Byrd-P201LHS Scoop Insert Tips (3) & Byrd LHPART Partial Raiser with
Byrd-PRBLH Insert Tips (3)
RubCollar
Raised Panel Partial Insert Cutter Head
Counterclockwise Face Up - Carbide
Item# Description Price
BYRD-LHPART Partial Back Insert Cutter with Tips $184
Partial Under Raiser Carbide Insert TipsCounterclockwise Face Up - Carbide
Also, when putting in new or sharpened knives, ensure no wood chips or dust is in
between the Tip & Gib!
Byrd
For the Partial Back Raise:
RAISED PANEL INSERT HEADS & TIPS WEAVER
5/8" Stock Single Raise: Byrd-LH-PANEL Cutter Head -
Byrd-P201LHS Scoop Insert Tips (Head takes 3 Carbide Tips)
Item# Description Set of 3 Price
BYRD-PRBLH Partial Under Raiser Insert Tips $33
86 - May 2018
www.weaver-company.com
Fax 1-913-831-2974 - 86 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 Copyright © 2018 all Rights Reserved
Item# Wings Type FRE1036 3 Carbide
Price$499
Item# Wings FRE1090A-114-BB-NB 3
Type Price Carbide $499
5/8" Raised Panel Cutters for Single Raise
Item# Wings Type FRE7046D3 3 Carbide
Price$499
For 5/8" stock, face up. Use 2-1/4" O.D. Ball Bearing Rub Collar - If you need a ball bearing rub collar, order #BB2086 - Price $39 (not included in cutter price)
(These Raised Panel Cutters are 51/2" Outside Diameter)
WEAVERManufactured
In U.S.A.
Solid Body Carbide Tipped Shaper Cutters
Scoop
Item# Wings Type FRE1041 3 Carbide
Price$499
Quarter Round Bead
Item# Wings Type PriceFRE1049 3 Carbide $499
Bevel
. . . is typically used with 51/2" Raised Panel Cutters. This cutter is recessed to accept a Ball Bearing Rub Collar (BB2086 - 21/4" O.D.) and make a 1/4" tongue for your panel. If you need a ball bearing rub collar, order item BB2086 - Price $39 (not included in cutter price)
Partial Back Under Raised Panel
Item# Wings Type FRE1045 3 Carbide
Price$499
Ogee
Scoop
Raised Panel Cutters
- 87 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 87
MANUFACTURED IN U.S.A.
Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa CALL TOLL FREE 1-800-255-6214Phone 1-913-831-1800
Copyright © 2018 all Rights Reserved
Item# Wings Type PriceC7099D3 2 Carbide $199
Item# Wings Type PriceFRE1049 3 Carbide $440
Shaker Cabinet Door Cutters
Stile & Rail Cutter Sets
For 5/8" Panel
Item Description
PC15-003 Bevel - 1-1/4" Bore MC55-003 Bevel - 3/4" Bore
Price
$304$359
Raised Panel Cutters
Item Description PC10-500-501-801 Shaker Door Set 1-1/4" Bore MC50-500-501-801 Shaker Door Set 3/4" Bore
Price
$489$415
- 3 Wing Carbide
- Counterclockwise Rotation - 3 Wing Carbide
Item Description Price
PC16-001R Shaker Partial Raiser - 1-1/4" Bore$449 MC56-001R Shaker Partial Raiser - 3/4" Bore $399
WEAVER
Item Description
PC10-060-501-801 Shaker Door Set 1-1/4" Bore
MC50-060-501-801 Shaker Door Set 3/4" Bore
Price
$596$506
PC means 11/4" bore, CarbideMC means 3/4" bore carbide
Cope & Pattern 3/4" to 11/8" Material Mini Pro: 3/4" bore, 23/16" bearing, 215/16" tenon OD, 33/16" stile ODPro Line: 11/4" bore, 31/4" bearing, 4" tenon OD, 41/4" stile ODM-Mini Pro, P-Pro Line, C-Carbide
Fence Required
Fence Required
(Price includes both tenon and stile cutters)
(Price includes both tenon and stile cutters)
88 - May 2018
www.weaver-company.com
Fax 1-913-831-2974 - 88 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 Copyright © 2018 all Rights Reserved
Shaker Cabinet Door Cutters
Stile & Rail Cutter Sets
Byrd
Item Description Price
BYP203LHS Insert Head with Tips (3) $335
For 5/8" Panel For 3/8" to 5/8"Panel
Raised Panel Cutters
- Counterclockwise Rotation - 3 Wing Carbide - Insert Tips
- Counterclockwise Rotation - 3 Wing Carbide Insert Tips - 1-1/4 Bore
Item Description Price
BYRH/R-BACK Insert Head with tips (3) $184 Use 5/8" panel for deeper raise.
1/4" x 1/2" Tongue
Stile Cut Rail Cut
1/4" x 1/2" Tongue
Stile Cut Rail Cut
Item Description Price
6L Bevel Shaker Stile & Rail Heads and 6L Tips $618
Available in 1-1/4" or 3/4" Bore
Item Description Price 7L Shaker Stile & Rail Heads and 7L Tips $618
Available in 1-1/4" or 3/4" Bore
WEAVER
(Price includes both tenon and stile cutters)
(Price includes both tenon and stile cutters)
- 89 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 89
MANUFACTURED IN U.S.A.
Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa CALL TOLL FREE 1-800-255-6214Phone 1-913-831-1800
Copyright © 2018 all Rights Reserved
Byrd-LHS-1-1/4" Bore Stile Head - Byrd-1LHSE Quarter Round Stile Insert Tips
w/Easment (3-Carbide)
Stile & Rail Edge
Tip and Gib must be held securely against the seat & Stop Screw when tightening
the Gib Screw
Item# Description Set of 3 PriceBYRD-1LHSE Quarter Round - Easement $81BYRD-1LHRE Quarter Round - Easement $81
BYRD-2LHSE Ogee - Easement $81BYRD-2LHRE Ogee - Easement $81
BYRD-3LHSE Curve Profile - Easement $81BYRD-3LHRE Curve Profile - Easement $81
BYRD-4LHSE Bead - Easement $81BYRD-4LHRE Bead - Easement $81
STILE & RAIL INSERT HEADS & TIPS WEAVERManufactured
In U.S.A.
Byrd
Cabinet Door Profile Carbide Insert Tips
"Easement" tips have a small radius where
required for stain relief (or designated as eased
edges.)
With the cutter profile having a slight radius where the panel meets the stile, the stain or finish can work its way under the stile. Thus, movement from panel contraction will not expose the unfinished part of the panel as readily as traditional cabinet door cutting.
Cabinet Door Profile Cutter Heads
Item# Description Wings Price
BYRD-LHS Stile Insert Cutter Head and Tips(3) 3 $309BYRD-LHR Rail Insert Cutter Head and Tips(3) 3 $309
11/4" Bore - Counterclockwise Face Down - 41/2 O.D. 31/2 M.D.
The Easement Cabinet Door Cutters are used to solve stain and finish problems.
Easement Cut
Edge of finish not exposed since it is also under the easement lip.
the solution
Traditional Cut
Edge of finish showing due to panel contraction
the problem
Note: 3 tips required in the insert heads.
Also, when putting in new or sharpened knives, ensure no
wood chips or dust is in between the Tip & Gib!
"LH" Profiles shown - Counterclockwise Rotation - Stock Face Down
Byrd-LHR-1-1/4" Bore Cutter Head
- Byrd-1LHRE Quarter Round Rail Insert Tips w/Eas-ment (3-Carbide)
90 - May 2018
www.weaver-company.com
Fax 1-913-831-2974 - 90 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 Copyright © 2018 all Rights Reserved
Tip and Gib must be held securely against the seat & Stop Screw when tightening
the Gib Screw
"LH" Profiles shown - Counterclockwise
Rotation - Stock Face Down
Item# Description Set of 3 PriceBYRD-1LHSGE Quarter Round - Easement $81BYRD-1LHRGE Quarter Round - Easement $81
BYRD-2LHSGE Ogee - Easement $81BYRD-2LHRGE Ogee - Easement $81
BYRD-3LHSGE Curve Profile - Easement $81BYRD-3LHRGE Curve Profile - Easement $81
BYRD-4LHSGE Bead - Easement $81BYRD-4LHRGE Bead - Easement $81
STILE & RAIL INSERT HEADS & TIPS - GLASS WEAVERManufactured
In U.S.A.Byrd
Cabinet Door Profile Carbide Insert Tips
Cabinet Door Profile Cutter Heads
Item# Description Set of 3 Price
BYRD-LHSG Stile Insert Cutter Head - Glass w/Tips $309BYRD-LHRG Rail Insert Cutter Head - Glass w/Tips $309
11/4" Bore - Counterclockwise Face Down.
Note: 3 tips required in the insert heads.
Also, when putting in new or sharpened knives, ensure no
wood chips or dust is in between the Tip & Gib!
"Easement" tips have a small radius
designated as "eased edges".)
Byrd-LHSGE-1-1/4" Bore Stile Head - & Insert Tips w/Easment
(3-Carbide)
Byrd-LHRGE-1-1/4" Bore Cutter Head - & Insert
Tips w/ Easement (3-Carbide)
- 91 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 91
MANUFACTURED IN U.S.A.
Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa CALL TOLL FREE 1-800-255-6214Phone 1-913-831-1800
Copyright © 2018 all Rights Reserved
Byrd 7LSCutter Head - with Byrd 7LS
Shaker Stile Insert Tips (3-Carbide)
Stile & Rail Edge
Tip and Gib must be held securely against the seat & Stop Screw when tightening
the Gib Screw
Shaker tips require Shaker cutter heads.
tem# Description Set of 3 Price
BYRD-7LS Shaker Stile Profile Carbide Insert Tips $81BYRD-7LR Shaker Rail Profile Carbide Insert Tips $81BYRD-5S Shaker Stile Profile Carbide Insert Tips $81BYRD-5R Shaker Rail Profile Carbide Insert Tips $81
SHAKER CUTTER HEADS
SHAKER INSERT TIPS
ByrdWEAVER
tem# Description Price
7LS-11/4" Shaker Stile Head and 7LS Tips $3097LR-11/4" Shaker Rail Head and 7LR Tips $3095S-11/4" Shaker Stile Head and 5S Tips $3095R-11/4" Shaker Rail Head and 5R Tips $309
Counterclockwise Face Down - 11/4" Bore - 41/2" O.D. 31/2" M.D.
SHAKER INSERT HEADS & TIPS
Also, when putting in new or sharpened knives, ensure no
wood chips or dust is in between the Tip & Gib!
SHAKER/MISSION PARTIAL BACK RAISE CUTTER HEADS
tem# Description Price
BYRD-PRBRH Shaker Panel Partial Insert Cutter Head w/Tips(3) $184
1-1/4" Bore - Counterclockwise Face Down (back of the panel is face up) - 41/2 O.D.
For 1/2" panel thickness. Use 5/8" panel for deeper raise.
Shaker/Mission Partial Back Raise Carbide Insert TipsCounterclockwise Face Down - Carbide tem# Description Set of 3 PriceBYRD-RHPARTIAL Partial Raiser Insert Tips $33
NOTE: For centered tongueBYRD-5SH & 5RH Heads
Required , and for the offset tongue
BYRD-7LR & 7LS Heads Required.
Manufactured In U.S.A.
Byrd 7LR Cutter Head with Byrd 7LR Shaker Rail Insert Tips (3-Carbide)
- 92 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERManufactured In U.S.A.
IPAGES-CU-SR-BT-F
92 - May 2018
Cope & Pattern 3/4" to 11/8" Material Mini Pro: 3/4" bore, 23/16" bearing, 215/16" tenon OD, 33/16" stile ODPro Line: 11/4" bore, 31/4" bearing, 4" tenon OD, 41/4" stile ODM-Mini Pro, P-Pro Line, C-Carbide, T-T-alloy
PC means 11/4" bore, CarbidePT means 11/4" bore T-AlloyMC means 3/4" bore Carbide
Easement SetsCabinet Door Cutter Sets
Bore 3/4" Carbide 11/4" Carbide 11/4" T-Alloy
Price$607$715$786
Profiled Cabinet Door Sets
(Price includes both tenon and stile cutters)
Carbide Carbide
Bore3/4"
11/4"11/4" T-Alloy
Price$498
$586$645
Shaker Cabinet Door Sets
(Price includes both tenon and stile cutters)
- 93 -
Fax 1-913-831-2974
www.weaver-company.com
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
(Price includes both tenon and stile cutters)
(Price includes both tenon and stile cutters)
WEAVERManufactured In U.S.A.
IPAGES-CU-SR-BT-F
May 2018 - 93
Cope & Pattern 3/4" to 11/8" Material Mini Pro: 3/4" bore, 23/16" bearing, 215/16" tenon OD, 33/16" stile ODPro Line: 11/4" bore, 31/4" bearing, 4" tenon OD, 41/4" stile ODM-Mini Pro, P-Pro Line, C-Carbide, T-T-alloy
PC means 11/4" bore, CarbidePT means 11/4" bore T-AlloyMC means 3/4" bore Carbide
Cabinet Door Cutter SetsNon-Easement Sets
Bore 3/4" Carbide 11/4" Carbide 11/4" T-Alloy
Price$506$596$655
Profiled Cabinet Door Sets
(Price includes both tenon and stile cutters)
Bore 3/4" Carbide 11/4" Carbide 11/4" T-Alloy
Price$415$489$538
Shaker Cabinet Door Sets
(Price includes both tenon and stile cutters)
- 94 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERManufactured In U.S.A. Cabinet Door Cutter Sets
IPAGES-CU-SR-BT-F
94 - May 2018
Cope & Pattern 3/4" to 11/8" Material Pro Line: 11/4" bore, 31/2" bearing, 4" tenon OD, 41/2" stile ODP-Pro Line, C-Carbide, T-T-alloy
Easement Sets - Brazed Tenon-Insert Stile
Stile & Rail Edge
BIC means 11/4" bore, Carbide Set brazed tip rail, insert stile.
BIT means 11/4" bore T-Alloy Set brazed tip rail, insert stile.
Bore Each11/4” Carbide $69911/4” T-Alloy $749
Profiled Cabinet Door Sets
(Price includes both tenon and stile cutters)
Bore Each11/4” Carbide $64911/4” T-Alloy $699
Shaker Cabinet Door Sets
(Price includes both tenon and stile cutters)
- 95 -
Fax 1-913-831-2974
www.weaver-company.com
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVERManufactured In U.S.A. Cabinet Door Cutter Sets
IPAGES-CU-SR-BT-F
May 2018 - 95
Cope & Pattern 3/4" to 11/8" Material Pro Line: 11/4" bore, 31/2" bearing, 4" tenon OD, 41/2" stile ODP-Pro Line, C-Carbide, T-T-alloy
BIC means 11/4" bore, Carbide Set brazed tip rail, insert stile.
BIT means 11/4" bore T-Alloy Set brazed tip rail, insert stile.
Non- Easement Sets - Brazed Tenon-Insert Stile
Stile & Rail Edge
Bore Each11/4" Carbide $69911/4" T-Alloy $749
Profiled Cabinet Door Sets
(Price includes both tenon and stile cutters)
Bore Each11/4” Carbide $64911/4” T-Alloy $699
Shaker Cabinet Door Sets
(Price includes both tenon and stile cutters)
- 96 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERManufactured In U.S.A. Cabinet Door Cutter Sets
IPAGES-CU-SR-BT-F
96 - May 2018
Cope & Pattern 3/4" to 11/8" Material 11/4" bore, 31/2" bearing, 41/2” OD Stile & TenonC-Carbide, T-T-alloy
IC means 11/4" bore, Carbide Set IT means 11/4" bore T-Alloy Set
Bore Each11/4” Carbide $69911/4” T-Alloy $699
Profiled Cabinet Door Sets
(Price includes both tenon and stile cutters)
Bore Each11/4” Carbide $69911/4” T-Alloy $699
Shaker Cabinet Door Sets
(Price includes both tenon and stile cutters)
Stile & Rail Edge
Insert Cutters Sets - Easement Tips
- 97 -
Fax 1-913-831-2974
www.weaver-company.com
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
(Price includes both tenon and stile cutters)
WEAVERManufactured In U.S.A. Cabinet Door Cutter Sets
IPAGES-CU-SR-BT-F
May 2018 - 97
Cope & Pattern 3/4" to 11/8" Material 11/4" bore, 31/2" bearing, 41/2” OD Stile & TenonC-Carbide, T-T-alloy
IC means 11/4" bore, Carbide Set IT means 11/4" bore T-Alloy Set
Bore Each11/4" Carbide $69911/4" T-Alloy $699
Profiled Cabinet Door Sets
(Price includes both tenon and stile cutters)
Bore Each11/4” Carbide $69911/4” T-Alloy $699
Shaker Cabinet Door Sets
(Price includes both tenon and stile cutters)
Stile & Rail Edge
Insert Cutters Sets - Non-Easement Tips
98 - May 2018
- 98 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Cabinet Door Cutter SetsInsert Cutters Sets - Multiple Profile Insert Cope & Pattern Heads
Multiple Profile Insert Cope & Pattern Heads
Eased edges available.1-1/4” Bore.,4-1/2” Outside Diameter.Carbide & T-Alloy tips. $699 per set with your first set of tips intalled.
Accepts the following “in-Stock” Profiles:
WEAVERManufactured
In U.S.A.
Bore Each11/4" Carbide $69911/4" T-Alloy $699
Multiple Profile Insert Cope & Pattern Heads
(Price includes both tenon and stile cutters with choice of first set of profiles installed.)
- 99 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 99
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Square Edge 3/4"to 7/8" Shaker Cabinet Door Sets (Price includes both tenon and stile cutters) Item# Wings PriceFRE9206EF1 3 $899(Price includes both tenon and stile cutters)
Item# Wings PriceFRE9036EF1 3 $899
(Price includes both tenon and stile cutters)Item# Wings PriceFRE9016EF1 3 $899
Quarter Round
Ogee
WEAVERManufactured
In U.S.A. CABINET DOOR CUTTER SETSSolid Body Carbide Tipped Shaper Cutters
With the cutter profile having a slight radius where the panel meets the stile, the stain or finish can work its way under the stile. Thus, movement from panel contraction will not expose the unfinished part of the panel as readily as traditional cabinet door cutting.
The Easement Cabinet Door Cutters are used to solve stain and finish problems.
"Easement" tips have a small radius where required for stain relief (or
designated as eased edges.)
(FOR 3/4" to 7/8" STOCK)
CABINET DOOR SETS
(counter clockwise face down)
(Price includes both tenon and stile cutters)Item# Wings PriceFRE9026EF1 3 $899
Shaker
C9206EF1
Bead
IPAGES-CU-CD-SR-BT-E
(11/4" Bore - 4" Outer Diameter - 3" Minor Diameter)
Easement Cabinet Door Stile & Rail
Traditional Cut
Edge of f inish showing due to panel contraction
the problem
Easement Cut
Edge of finish not exposed since it is also under the easement lip.
the solution
100 - May 2018
- 100 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
CABINET DOOR SETS
(Price includes both tenon and stile cutters)Item# Wings Price
FRE9026F1 3 $899
(Price includes both tenon and stile cutters)Item# Wings PriceFRE9036F1 3 $899
Square Edge 3/4" to 7/8" Shaker Cabinet Door Sets (Price includes both tenon & stile cutters.) Item# Wings PriceFRE9207F1 3 & 2 $899
(Price includes both tenon and stile cutters)Item# Wings Price
FRE9016F1 3 $899
Quarter Round Bead
Ogee Shaker
WEAVERCABINET DOOR CUTTER SETS
Solid Body Carbide Tipped Shaper Cutters
C9207F1
(FOR 3/4" to 7/8" STOCK)(counter clockwise face down)
(11/4" Bore - 4" Outer Diameter - 3" Minor Diameter)
Manufactured In U.S.A.
Price includes both tenon and stile cutters
- 101 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 101
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVERManufactured In U.S.A. Cope & Pattern, Window Sash Cutter Sets
$532 $626
$689
$578 $578 $578$679 $679 $679
$747 $747 $747
$465 $465$582 $582$640 $640
102 - May 2018
- 102 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Tip and Gib must be held securely against the seat & Stop Screw when tightening
the Gib Screw
DOOR EDGE INSERT HEADS & TIPS WEAVERManufactured
In U.S.A.
Byrd Door Edge Profile Cutter Heads & Tips
11/4" Bore - Counterclockwise Face Up - 31/2 M.D.
Note: 3 tips required in the insert heads.
Also, when putting in new or sharpened knives, ensure no
wood chips or dust is in between the Tip & Gib!
Insert Head $309(Includes 3 tips)
Extra Tips Set of 3 $81
BYRD-DERH Byrd Door Edge Head - CCW FUBYRD-1DERH Byrd Door Edge Profile Tips
- 103 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 103
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVER SHAPER CUTTERSManufactured
In U.S.A.
Bore 3/4" Carbide 11/4" Carbide 11/4" T-Alloy
Price Each$204$240$264
Bore 3/4" Carbide 11/4" Carbide 11/4" T-Alloy
Price Each$164$190$209
DOOR EDGE PROFILES
DOOR EDGE COMPONENTS SET-UP EXAMPLE:
104 - May 2018
- 104 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVER SHAPER CUTTERSManufactured
In U.S.A.
TOP DOOR EDGE COMPONENTS 7/8” TO 1" MATERIAL
DOOR EDGE PROFILES
Bore 3/4" Carbide 11/4" Carbide 11/4" T-Alloy
Price Each$204$240$264
- 105 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 105
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVER SHAPER CUTTERSManufactured In U.S.A.
DOOR EDGE PROFILES
Mini Pro: 3/4" bore 111/16" Bearing 215/16" ODPro Line: 11/4" bore 23/4" Bearing 4" ODM-Mini Pro, P-Pro Line, C-Carbide, T-T-alloy
Bore 3/4" Carbide 11/4" Carbide 11/4" T-Alloy
Price Each$204$240$264
106 - May 2018
- 107 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 107
MANUFACTURED IN U.S.A.
MANUFACTURED IN U.S.A.
PhP oh no ene 1-1 9- 19 31 -3 8- 38 13 -1 1- 81 08 000 CACALL TOTOLL FREE 1-800-255-621214Copyright © 2018 all Rights Reserved Weaver Compapany - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVER SHAPER CUTTERSDOOR EDGE PROFILES
Manufactured In U.S.A.
$150 $177$194
$290$305
$290$305
$290$305
108 - May 2018
- 108 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVER SHAPER CUTTERSManufactured In U.S.A.
ROUNDS & GROOVERS
$ 78$ 83$ 92$128$152$158$180
$ 91 $ 98 $105 $195 $245$255 $275 $312
$100 $110 $115 $215 $270$280 $305$360
71 86102113140
68 68 68 68 71 75 78 81 85 88 95105118128
75 75 75 75 78 82 86 89 93 97103116130141
58 58 58 58 61 63 67 69 72 75 81 89101109
63 69 78 86 109
75 81
91 101 128
82 89
101 112 141
72 72 81 86 86 92 106 106 132 149 170
85 85
95 101 101 108 125 125 155 165 172
93 93105 112 112 119 138 138 171 178 193
83 101 119 133 165
91 111 131 146 183
- 109 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 109
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVER WEAVER SHAPER CUTTERSManufactured In U.S.A.
EASING SETS
78 84 101 106 120 129
91 98 118 125 142 154
101108130138156167
258 303333
258 326352
$103 $122$134
$142 $168
$185
$115 $135$149
$128 $150$166
110 - May 2018
- 110 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVER SHAPER CUTTERSManufactured In U.S.A.
GLUE JOINT, FLOORING SET
215 275305
535 630693
630693
535
May 2018 - 111
WEAVER
112 - May 2018
- 112 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Manufactured In U.S.A. WEAVERHouse Door Cutters
For Easement Add 20%
(See numbers next to profiles)
Detail Stile & Rail Set for 1-3/8-1-3/4 Stock
Description 3/4 Bore 1-1/4 Bore
Carbide
$ 920$1,082
Alloy
$1,190
1-3/8-1-3/4 Stock
Mini Pro: 3/4" bore 111/16" Bearing 215/16" ODPro Line: 11/4" bore 23/4" Bearing 4" ODM-Mini Pro, P-Pro Line, C-Carbide, T-T-alloy
(Sharp Option)
For Easement Add 20%
Description Carbide Alloy 3/4 Bore
1-1/4 Bore
$727
$855 $941(See numbers next to profiles)
Square Edge Stile & Rail Set for 1-3/8-1-3/4 Stock
Example Cut
These 8 piece cutter sets are built to cut both 13/8" passage doors and 13/4" entry doors simply by changing the center cutters.
- 113 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 113
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVERHouse Door Cutters1-3/8-1-3/4 Stock
For Easement Add 20%
Description Carbide Alloy 3/4 Bore
1-1/4 Bore
$727
$855 $941(See numbers next to profiles)
Square Edge Stile & Rail Set for 1-3/8-1-3/4 Stock
Mini Pro: 3/4" bore 111/16" Bearing 215/16" ODPro Line: 11/4" bore 23/4" Bearing 4" ODM-Mini Pro, P-Pro Line, C-Carbide, T-T-alloy
These 8 piece cutter sets are built to cut both 13/8" passage doors and 1-3/4" entry doors simply by chang-ing the center cutters.
For Easement Add 20%
(See numbers next to profiles)
Detail Stile & Rail Set for 1-3/8-1-3/4 Stock
Description 3/4 Bore 1-1/4 Bore
Carbide
$ 920$1,082
Alloy
$886$1,190
Example Cut
Manufactured In U.S.A.
114 - May 2018
- 114 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Manufactured In U.S.A. WEAVER
Mini Pro: 3/4" bore 111/16" Bearing 215/16" ODPro Line: 11/4" bore 23/4" Bearing 4" ODM-Mini Pro, P-Pro Line, C-Carbide, T-T-alloy
2-1/4" Stock
For Easement Add 20%
Description Carbide Alloy 3/4 Bore $1,170 $1,107 1-1/4 Bore $1,382 $1,490
(See numbers next to profiles)
Stile & Rail Set for 1-3/8-2-1/4 Stock (Includes Extra 1/2" Groovers - for 2-1/4" Stock )
(Sharp Option)
Description 3/4 Bore 1-1/4 Bore
Carbide
$ 977$1,155
Alloy
$916$1,241
Square Edge Stile & Rail Setfor 1-3/8-2-1/4 Stock
(Includes Extra 1/2 roovers - for 2-" G 1/4" Stock )
For Easement Add 20%
Example Cut
(See numbers next to profiles)
House Door Cutters
- 115 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 115
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Manufactured In U.S.A.
Descriptionion 3/4 Bore 1-1/ BoreBore
Alloy
$1,241
WEAVER2-1/4" Stock
Square Edge Stile & Rail Set Square Edge Stile & Rail Set ge Stile & Rail SetSquare Edfor 1-3/8-2-1/4 Stock
(Includes Extra 1/2" Groovers - for 2-1/4" Stock )
For Easement Add 20%
(See numbers next to profiles)
Mini Pro: 3/4" bore 111/16" Bearing 215/16" ODPro Line: 11/4" bore 23/4" Bearing 4" ODM-Mini Pro, P-Pro Line, C-Carbide, T-T-alloy
For Easement Add 20%
Description 3/4 Bore 1- Bore
Carbide
$1,170$1,382
Alloy
$1,490(See numbers next to profiles)
Stile & Rail Set for 1-3/8-2-1/4 Stock (Includes Extra 1/2" Groovers - for 2-1/4" Stock )
Example Cut
House Door Cutters
CarbiCde$ 977$1,150
$834$980
Carbide
116 - May 2018
- 116 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Manufactured In U.S.A.
Mini Pro: 3/4" bore 111/16" Bearing 215/16" ODPro Line: 11/4" bore 23/4" Bearing 4" ODM-Mini Pro, P-Pro Line, C-Carbide, T-T-alloy
WEAVER Glass 1-3/8-1-3/4 Stock
Description 3/4 Bore 1-1/4 Bore
Carbide
$ 922$1,080
Alloy
$1,200
Glass Panel Square Edge Stile & Rail Set for 1-3/8-1-3/4 Stock
(See numbers next to profiles)
Example Cut
Description 3/4 Bore 1-1/4 Bore
Carbide
$1,415$1,307
Alloy
$1,440
Glass Panel Detail Stile & Rail Set for 1-3/8-1-3/4 Stock
For Easement Add 20%
(See numbers next to profiles)
House Door Cutters(Sharp Option)
- 117 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 117
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVER Glass 1-3/8-1-3/4 Stock
Mini Pro: 3/4" bore 111/16" Bearing 215/16" ODPro Line: 11/4" bore 23/4" Bearing 4" ODM-Mini Pro, P-Pro Line, C-Carbide, T-T-alloy
Description 3/4 Bore 1-1/4 Bore
Carbide
$ 922$1,080
Alloy
$1,200
Glass Panel Square Edge Stile & Rail Set for 1-3/8-1-3/4 Stock
(See numbers next to profiles)
Example Cut
Description 3/4 Bore 1-1/4 Bore
Carbide
$1,115$1,307
Alloy
$1,440
Glass Panel Detail Stile & Rail Set for 1-3/8-1-3/4 Stock
For Easement Add 20%
(See numbers next to profiles)
Manufactured In U.S.A. House Door Cutters
118 - May 2018
- 118 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Manufactured In U.S.A.
Mini Pro: 3/4" bore 111/16" Bearing 215/16" ODPro Line: 11/4" bore 23/4" Bearing 4" ODM-Mini Pro, P-Pro Line, C-Carbide, T-T-alloy
WEAVER(Sharp Option)
Glass Panel Square Edge Stile & Rail Set for 1-3/8-2-1/4 Stock
(See numbers next to profiles)
Description 3/4 Bore 1-1/4 Bore
Carbide
$1,117$1,305
Alloy
$770$1,441
Example Cut
Glass Panel Detail Stile & Rail Set for 1-3/8-2-1/4 Stock
For Easement Add 20%
(See numbers next to profiles)
Description 3/4 Bore 1-1/4 Bore
Carbide
$1,310$1,532
Alloy
$854$1,690
House Door Cutters Glass 21/4 Stock
- 119 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 119
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVER
Description 3/4 Bore 1-1/4 Bore
Carbide
$1,117$1,305
Alloy
$770$1,441
Glass Panel Square Edge Stile & Rail Set for 1-3/8-2-1/4 Stock
Mini Pro: 3/4" bore 111/16" Bearing 215/16" ODPro Line: 11/4" bore 23/4" Bearing 4" ODM-Mini Pro, P-Pro Line, C-Carbide, T-T-alloy
Example Cut
Glass Panel Detail Stile & Rail Set for 1-3/8-2-1/4 Stock
For Easement Add 20%
(See numbers next to profiles)
Description 3/4 Bore 1-1/4 Bore
Carbide
$1,310$1,532
Alloy
$854$1,690
(See numbers next to profiles)
Manufactured In U.S.A. House Door Cutters
Glass 21/4 Stock Glass
120 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800
www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters
CAT-SUP-CU-WSL - 120 -
MADE IN GERMANY
5/8” Raised Panel Cutters for Single Raise . . . for 5/8” stock. Use 2-1/4” O.D. Ball Bearing Rub Collar - If you need a ball bearing rub collar, order item #BB2086 - Price $39 (not included in cutter price)
CABINET DOOR RAISED PANEL CUTTERS
(These Raised Panel Cutters are 51/2” Diameter, 11/4” Bore)
Item# Wings Type PriceC7158D1 2 HSS $129C7159D1 2 Carbide $186
Item# Wings Type PriceC7169 2 Carbide $186
5/8” Raised Panel Cutters for Single Raise - Stock Face Down
“Not Recessed for Bearing” “Recessed for Bearing”
Item# Wings Type PriceC7188D1 2 HSS $129
“Not Recessed for Bearing”
Item# Wings Type PriceC7148D1 2 HSS $129
“Not Recessed for Bearing”
May 2018 - 121
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MADE IN GERMANYwww.weaver-company.com
Fax 1-913-831-2974CAT-SUP-CU-WSL - 121 -
Phone 1-913-831-1800Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters
5/8” Raised Panel Cutters for Single Raise . . . for 5/8” stock, face up. Use 2-1/4” O.D. Ball Bearing Rub Collar - If you need a ball bearing rub collar, order item #BB2086 - Price $39 (not included in cutter price)
Item# Wings Type PriceC7038F3 2 High Speed Steel $139C7039F3 2 Carbide $199
RAISED PANEL CUTTERS
For 3/4” stock, face up. Use 21/4” O.D. Ball Bearing Rub Collar - If you need a ball bearing rub collar, order item #BB2086 - Price $39 (not included in cutter price)
Item# Wings Type PriceC7078F3HD 2 High Speed Steel $139
For 3/4” stock
(These Raised Panel Cutters are 51/2” Diameter, 11/4” Bore)
Item# Wings Type PriceC7119F1 2 Carbide $199
Item# Wings Type PriceC7138F1 2 HSS $139C7139F1 2 Carbide $199
3/4” Raised Panel Cutters for Single Raise - Stock Face Down
(These Raised Panel Cutters are 51/2” Diameter, 11/4” Bore)
“No Shear”
“Not Recessed for Bearing”
“Not Recessed for Bearing”
Raised Panel Cutters
122 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800
www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters
CAT-SUP-CU-WSL - 122 -
MADE IN GERMANY
ALL SQUARE EDGE CUTTERS WILL GROOVE AND RABBET
SQUARE EDGE CUTTERS11/4 Bore
3/4” Wide Carbide CuttersItem# Wings O.D. Width Price
C9249V C9259V
2 2
31/8” 37/8”
3/4” 3/4”
$99$99
3/4” Wide High Speed Steel CuttersItem# Wings O.D. Width Price
C9238V
2
4”
3/4”
$79
7/32” Wide Carbide CuttersItem# Wings O.D. Width PriceC90X9-A3-7/32 2 4” 7/32” $69
7/32” Wide High Speed Steel CuttersItem# Wings O.D. Width PriceC90X8-A3-7/32 2 4” 7/32” $55
3/8”Wide High Speed Steel CuttersItem# Wings O.D. Width PriceC8318V 2 31/2” 3/8 $60
1/2”Wide High Speed Steel Cutters
Item#
C9268V
Wings2
O.D.4”
Width 1/2”
Price$69
1/4” Wide High Speed Steel CuttersItem# Wings O.D. Width
C8308VSTE.250x3.937-8
2 2
31/2” 315/16”
1/4” 1/4”
Price$55$55
1/4” Wide Carbide CuttersItem# Wings O.D. Width Price
C9019-B2
2
4”
1/4”
$69
1”Wide High Speed Steel CuttersItem# Wings O.D. Width PriceC8348V 2 31/2” 1” $89
May 2018 - 123
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MADE IN GERMANYwww.weaver-company.com
Fax 1-913-831-2974CAT-SUP-CU-WSL - 123 -
Phone 1-913-831-1800Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters
3/4” Wide High Speed Steel CuttersItem# Wings O.D. Width PriceC9288V 2 3” 3/4” $79C9248V 2 31/8” 3/4” $79C9238V 2 4” 3/4” $79
2”Wide Carbide CuttersItem# Wings O.D. Width PriceC8366V 3 3-1/2” 2” $179
SQUARE EDGE & BEVEL CUTTERS
3”Wide Carbide CuttersItem# Wings O.D. Width PriceC8379V 2 3-1/2” 3” $229
45° Cutters:
45 Degree CuttersItem# Wings Type O.D. PriceC8196V 3 Carbide 43/4 $109C8199V 2 Carbide 43/4 $99
30 Degree CuttersItem# Wings Type O.D. PriceC8226V 3 Carbide 329/32 $109C8228V 2 HighSpeed Steel 329/32 $79
30° Cutters:
11/4 Bore
1-1/4” Wide High Speed Steel CuttersItem# Wings O.D. Width PriceC8358V 2 3-1/2” 1-1/4” $99
124 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800
www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters
CAT-SUP-CU-WSL - 124 -
MADE IN GERMANY
Drawer Lock CutterItem No. O.D. I.D. Wings Height Type PriceC8136V 5-1/4” 11/4” 3 3/4” Carbide $175
DRAWER LOCK CUTTERS
DRAWER CUTTERS
DRAWER FRONT RAISERS
Drawer Raising Cutters - 3/4” BoreItem# Wings O.D. Type PriceC8087V3 2 6” High Speed Steel $149
(6” Diameter)Stock Face Up
May 2018 - 125
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MADE IN GERMANYwww.weaver-company.com
Fax 1-913-831-2974CAT-SUP-CU-WSL - 125 -
Phone 1-913-831-1800Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters
DETAIL EDGE CUTTERS
Detail Edge CuttersItem# Wings O.D. Type PriceC8266V 3 4” Carbide $219
REVERSING CUTTERS
Reversing Cutters shape both the ends and the edge of the material being used. To use, shape both ends of the rail and then turn the board over and run the shape on the edge. These cutters are excellent for making English library paneling over 3/4” plywood on wall or flat panel cabinet doors.
Reversing Profile Edge CuttersItem# Wings O.D. Type PriceC8026V 3 3-3/4” Carbide $249
Reversing Profile Edge CuttersItem# Wings O.D. Type PriceC8016V 3 33/4” Carbide $249
DETAIL CUTTERS11/4 Bore
Door Lip CuttersItem# Wings O.D. Type PriceC8928V 3 361/64” HSS $119
Door Lip CuttersItem# Wings O.D. Type PriceC8908V 2 361/64” HSS $119
Door Lip CuttersItem# Wings O.D. Type PriceC8938V 3 361/64” HSS $119C8936V 3 361/64” Carbide $199
DOOR LIP CUTTERS
126 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800
www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters
CAT-SUP-CU-WSL - 126 -
MADE IN GERMANY
T h e o v e r l a p p i n g cutter enables variation of stock, tongue and “V”.
Lower Cutter
Upper Cutter
This cutter set will make all sizes below - Example Wood Profiles:
Panels from 5/8” to 11/8” thickDesigned for productionCutters are split for shimming to perfect fit after sharpeningCutters are split for various stock, ‘V’ and tongue widths
V-PANELING CUTTERS
Item No. Description PriceC-8169-V 2 Wing Carbide $529C-8166-V 3 Wing Carbide $629
Both sides “V”
(Cuts face down - counter clockwise)
V-Paneling Cutters 3 Wing Carbide Tongue Half V-Paneling Cutters 3 Wing Carbide Groover Half
V-Paneling Cutters: These cutters are designed for high production use. Each cutter is split and can be shimmed for perfect fit. (41/8” Diameter)
11/4 Bore
Stock 5/8”, Tongue 1/4”
Stock 3/4”, Tongue 1/4”
Stock 1”, Tongue 5/16”
Stock 11/8”, Tongue 7/16”
May 2018 - 127
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MADE IN GERMANYwww.weaver-company.com
Fax 1-913-831-2974CAT-SUP-CU-WSL - 127 -
Phone 1-913-831-1800Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters
V-Paneling Cutters 3 Wing Carbide Groover Half
Excellent for Fluting:
CONVEX HALF ROUND CUTTERS
3/16” Radius Convex Half Round Edge CuttersItem# Wings O.D. Type PriceC8416V 3 31/8” Carbide $109C8418V 2 31/8” High Speed Steel $69
3/8” Radius Convex Half Round Edge CuttersItem# Wings O.D. Type PriceC8436V 3 3-1/2” Carbide $159
1/2” Radius Convex Half Round Edge CuttersItem# Wings O.D. Type PriceC8446V 3 3-3/4” Carbide $199C8448V 2 3-3/4” High Speed Steel $129
3/4” Radius Convex Half Round Edge CuttersItem# Wings O.D. Type PriceC8456V 3 4-1/4” Carbide $289C8458V 2 4-1/4” High Speed Steel $179
CONVEX HALF ROUND CUTTER EXAMPLES
CONVEX EDGE SHAPER CUTTERS
1” Radius Convex Half Round Edge CuttersItem# Wings O.D. Type PriceC8468V 2 4-3/4” High Speed Steel $189
11/4 Bore
128 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800
www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters
CAT-SUP-CU-WSL - 128 -
MADE IN GERMANY
CONCAVE HALF ROUND CUTTERS
1/8” Radius Concave Half Round Edge CuttersItem# Wings O.D. Type PriceC8508VC8506V
23
3”3"
High Speed SteelCarbide
$ 89$119
1/2” Radius Concave Half Round Edge CuttersItem# Wings O.D. Type PriceC8559V 2 3-3/4” Carbide $219
3/8” Radius Concave Half Round Edge CuttersItem# Wings O.D. Type PriceC8539V 2 3-1/2” Carbide $179
7/16” Radius Concave Half Round Edge CuttersItem# Wings O.D. Type Price
C8548V
2
3-5/8”
High Speed Steel $149
1/4” Radius Concave Half Round Edge CuttersItem# Wings O.D. Type PriceC8528V 2 3-3/4” High Speed Steel $129
CONCAVE EDGE SHAPER CUTTERS
CONCAVE HALF ROUND CUTTER EXAMPLES
11/4 Bore
May 2018 - 129
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MADE IN GERMANYwww.weaver-company.com
Fax 1-913-831-2974CAT-SUP-CU-WSL - 129 -
Phone 1-913-831-1800Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters
7/8” Radius Concave Half Round Edge CuttersItem# Wings O.D. Type PriceC8576V 3 4-1/2” Carbide $249C8578V 3 4-1/2” High Speed Steel $169
1” Radius Concave Half Round Edge CuttersItem# Wings O.D. Type PriceC8596V 3 4-3/4” Carbide $289C8598V 3 4-3/4” High Speed Steel $189
CONCAVE EDGE SHAPER CUTTERS11/4 Bore
Multiform Deluxe Slip StoneItem# PriceWS1000 110x50x10mm, 1000 Grit $10eaMade in Japan.
Soak the stone in water for two minutes before using. Sprinkle water on stone as needed to keep it sufficinetly wet; water acts as a lubricant.
Multiform Deluxe Slip Stone
Specially shaped stone for sharpening gouges, carving tools, garden shears, and other tools with curved cutting edges.
130 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800
www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters
CAT-SUP-CU-WSL - 130 -
MADE IN GERMANY
CONVEX EDGE SHAPER CUTTERS
CONVEX QUARTER ROUND CUTTERS
1/4” Radius Convex Quarter Round Edge CuttersItem# Wings O.D. Type PriceC8608V 2 3-1/4” High Speed Steel $69
1/2” Radius Convex Quarter Round Edge CuttersItem# Wings O.D. Type PriceC8618V 2 3-3/4” High Speed Steel $119C8619V 2 3-3/4” Carbide $159
3/4” Radius Convex Quarter Round CuttersItem# Wings O.D. Type PriceC8629V 2 4-1/4” Carbide $199
1” Radius Convex Quarter Round Edge CuttersItem# Wings O.D. Type PriceC8638V 2 4-3/4” High Speed Steel $159
CONVEX QUARTER ROUND CUTTER EXAMPLES
11/4 Bore
May 2018 - 131
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MADE IN GERMANYwww.weaver-company.com
Fax 1-913-831-2974CAT-SUP-CU-WSL - 131 -
Phone 1-913-831-1800Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper CuttersCONCAVE EDGE SHAPER CUTTERS
1” Radius Concave Quarter Round CuttersItem# Wings O.D. Type PriceC8676V 3 4-3/4” Carbide $249
CONCAVE QUARTER ROUND CUTTERS
CONCAVE QUARTER ROUND CUTTER EXAMPLES
11/4 Bore
13/8” Interior Profile, using one less spacer & the 1/4” groover.
House Door Set
13/4” Exterior Profileusing 2 spacers & the 9/32” &
1/4” groovers.
(9/16” Tongue Length)
Spacer
Spacerfence
3/4” Bore 2 Wing Cutters
Raised Panel Cutters
WEAVERWhile Supplies Last!
WEAVER
MADE IN GERMANY
Item# Wings Bore O.D. Type PriceC9215R2 2 3/4” 31/8” Carbide $369 (Price includes both tenon & stile cutters)
13/8”, 13/4” House Door Set
Item# Wings Type PriceC7097D1 2 HSS $129
(This Raised Panel Cutter is 6” Diameter, 3/4” Bore)
“Not Recessed for Bearing”
Item# Wings Bore O.D. Reveal Type PriceC7085D3 2 3/4” 4 3/4” 1 1/2” Carbide $108
132 - May 2018
www.weaver-company.com
Fax 1-913-831-2974 - 132 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800 Copyright © 2018 all Rights Reserved
May 2018 - 133
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MADE IN GERMANYwww.weaver-company.com
Fax 1-913-831-2974CAT-SUP-CU-WSL - 133 -
Phone 1-913-831-1800Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters3/4” Bore 2 Wing Cutters
Raised Panel Cutters
Item# Wings Bore O.D. Type PriceC9215R2 2 3/4” 31/8” Carbide $369 (Price includes both tenon & stile cutters)
13/8”, 13/4” House Door Set
Item# Wings Height Bore O.D. Type PriceC9225V 2 1/2” 3/4” 31/8” Carbide $59
Item# Wings Bore O.D. Reveal Type PriceC7085D3 2 3/4” 4 3/4” 1 1/2” Carbide $108
House Door Cutters 13/8 - 13/4 Stock - High Speed Steel
House Door Set (1/2” Tongue Length)
Spacer
Spacerfence
13/8” Interior Profile, using one spacer & the 1/4” groover.
13/4” Exterior Profileusing 2 spacers & the 9/32” &
1/4” groovers.
Cabinet Door Sets for 3/4” to 7/8” Thickness 31/8” O.D. Item# Wings Bore Type PriceC9015F1 2 3/4” Carbide $279(Price includes both tenon & stile cutters)
Item# Wings Bore O.D. Type Price
C9218R2 2 11/4” 4” HSS $489 (Price includes both tenon & stile cutters)
Item# Wings Height Bore O.D. Type PriceC9238V 2 3/4” 1 1/4” 4” HSS $79
13/8”, 13/4” House Door Set
Optional Cutter for Glass Doors
134 - May 2018
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Phone 1-913-831-1800
www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper Cutters
CAT-SUP-CU-WSL - 134 -
MADE IN GERMANY
Use “45° Cutters”
Crown Molding Cutters:
Item No. Wings Height O.D. Type PriceC9768V 2 3” 31/2 High Speed Steel $369
#C9768V #C9758V
Item No. Wings Height O.D. Type PriceC9758V 2 21/8” 35/32” High Speed Steel $299
USA STOCKED FOR FAST DELIVERY
Molding Cutters
HEAD MOLDING CUTTERS
Cabinet Head Molding CuttersItem# Wings O.D. Type PriceC9736V 3 31/2” Carbide $359C9738V 2 31/2” HSS $239C9739V 2 31/2” Carbide $329
This cutter produces excellent head mold for the joint between upper cabinets and soffits as ceiling trim.
11/4 Bore
Item# Wings O.D. Height Type PriceC9788V 2 33/4” 23/4” High Speed Steel $399
Room Chair Rail Molding CuttersThis cutter from Weaver’s produces excellent wall molding for chair railings
Item# Wings Bore O.D. Type PriceC9298R2 2 11/4” 4” HSS $389 (Price includes both tenon & stile cutters)
13/8”, 13/4” Shaker House Door Set
Item# Wings Bore O.D. Type Price
C9218R2 2 11/4” 4” HSS $489 (Price includes both tenon & stile cutters)
Item# Wings Height Bore O.D. Type PriceC9238V 2 3/4” 1 1/4” 4” HSS $79
13/8”, 13/4” House Door Set
Item# Wings Height Bore O.D. Type PriceC9238V 2 3/4” 1 1/4” 4” HSS $79
May 2018 - 135
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MADE IN GERMANYwww.weaver-company.com
Fax 1-913-831-2974CAT-SUP-CU-WSL - 135 -
Phone 1-913-831-1800Copyright © 2018 all Rights Reserved
WEAVERWhile Supplies Last!
Shaper CuttersMolding Cutters11/4 Bore
MOLDING CUTTERS
Oven and Desk Molding CuttersItem# Wings O.D. Type PriceC9748V 2 3-5/8” High Speed Steel $239C9749V 2 3-5/8” Carbide $329
136 - May 2018
- 136 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVERManufactured
In U.S.A. Ball Bearing Rub Collars
2 washers come with each Ball Bearing Rub Collar.
Millimeter O.D.
BB8483 48mm 3/4” $ 69BB8853 85mm 3/4” $ BB8856 85mm 1-1/4” $ BB8906 90mm 1-1/4” $ BB81006 100mm 1-1/4” $ BB81256 125mm 1-1/4” $
69 89
119 149 199
Item O.D. Bore Price
BB2004 2 $ 29BB2024 2-1/16 $ 89BB2044 2-1/8 $ 89BB2064 2-3/16 $ 89BB2084 2-1/4 $ 89BB2104 2-5/16 $ 89BB2124 2-3/8 $ 89BB2144 2-7/16 $ 89BB2164 2-1/2 $ 89BB2184 2-9/16 $ 89BB2204 2-5/8 $ 89BB2224 2-11/16 $ 89BB2244 2-3/4 $ 89BB2264 2-13/16 $ 89BB2284 2-7/8 $ 89BB2304 2-15/16 $ 89 BB3004 3 $ 89BB3024 3-1/16 $ 89BB3044 3-1/8 $ 89BB3064 3-3/16 $ 89BB3084 3-1/4 $ 89BB3104 3-5/16 $ 89BB3124 3-3/8 $ 89BB3144 3-7/16 $ 89BB3164 3-1/2 $ 89BB3184 3-9/16 $ 119BB3204 3-5/8 $ 119BB3224 3-11/16 $ 119BB3244 3-3/4 $ 119BB3264 3-13/16 $ 119BB3284 3-7/8 $ 119BB3304 3-15/16 $ 119 BB4004 4 $ 119BB4024 4-1/16 $ 149BB4044 4-1/8 $ 149BB4064 4-3/16 $ 149BB4084 4-1/4 $ 149
Item O.D. Price1” Bore 1-1/4” Bore
Item O.D. Price BB2086 2-1/4 $ 89BB2106 2-5/16 $ 89BB2126 2-3/8 $ 89BB2146 2-7/16 $ 89BB2166 2-1/2 $ 89BB2186 2-9/16 $ 89BB2206 2-5/8 $ 89BB2226 2-11/16 $ 89BB2246 2-3/4 $ 89BB2266 2-13/16 $ 89BB2286 2-7/8 $ 89BB2306 2-15/16 $ 89 BB3006 3 $ 89BB3026 3-1/16 $ 89BB3046 3-1/8 $ 89BB3066 3-3/16 $ 89BB3086 3-1/4 $ 89BB3106 3-5/16 $ 89BB3126 3-3/8 $ 89BB3146 3-7/16 $ 89BB3166 3-1/2 $ 89BB3186 3-9/16 $ 119BB3206 3-5/8 $ 119BB3226 3-11/16 $ 119BB3246 3-3/4 $ 119BB3266 3-13/16 $ 119BB3286 3-7/8 $ 119BB3306 3-15/16 $ 119 BB4006 4 $ 119BB4026 4-1/16 $ 149BB4046 4-1/8 $ 149BB4066 4-3/16 $ 149BB4086 4-1/4 $ 149BB4106 4-5/16 $ 149BB4126 4-3/8 $ 149BB4146 4-7/16 $ 149BB4166 4-1/2 $ 149BB4186 4-9/16 $ 149BB4206 4-5/8 $ 149BB4226 4-11/16 $ 149BB4246 4-3/4 $ 199BB4266 4-13/16 $ 199BB4286 4-7/8 $ 199BB4306 4-15/16 $ 199 BB5006 5 $ 199
Item O.D. Price
3/4” Bore
BB1203 1-5/8 $ 29BB1223 1-11/16 $ 69BB1243 1-3/4 $ 69 BB1263 1-13/16 $ 69BB1283 1-7/8 $ 69
BB1303 1-15/16 $ 69 BB2003 2 $ 69BB2023 2-1/16 $ 69BB2043 2-1/8 $ 69BB2063 2-3/16 $ 69BB2083 2-1/4 $ 69BB2103 2-5/16 $ 69BB2123 2-3/8 $ 69BB2143 2-7/16 $ 69BB2163 2-1/2 $ 69BB2183 2-9/16 $ 69BB2203 2-5/8 $ 69BB2223 2-11/16 $ 69BB2243 2-3/4 $ 69BB2263 2-13/16 $ 69BB2283 2-7/8 $ 69BB2303 2-15/16 $ 69 BB3003 3 $ 69BB3023 3-1/16 $ 69BB3043 3-1/8 $ 69BB3063 3-3/16 $ 69BB3083 3-1/4 $ 69BB3103 3-5/16 $ 69BB3123 3-3/8 $ 69BB3143 3-7/16 $ 69BB3163 3-1/2 $ 69BB3183 3-9/16 $ 99BB3203 3-5/8 $ 99BB3223 3-11/16 $ 99BB3243 3-3/4 $ 99BB3263 3-13/16 $ 99BB3283 3-7/8 $ 99BB3303 3-15/16 $ 99 BB4003 4 $ 99
Panel Trimming using the crown panel jig, pattern, warning disc and BALL BEARING RUB COLLAR.
pattern
stock
warning disc
Ball BearingRub Collar
Panel Trimming using the Shapermaster, pat-tern, warning disc and BALL BEARING RUB
COLLAR.
Ball Bearing Rub Collar
Custom Ball Bearing Rub CollarSpecify Bore and O.D.
The Ball Bearing Rub Collar is one part of a machine setup. Always use the proper guide devices (such as fences, guides, patterns etc.), holding devices (such as jigs, hold downs, power feeders, etc.), Warning Disc and a Dust Shield in conJunection with the Ball Bearing Rub Collar.
- 137 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 137
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVERManufactured In U.S.A. WARNING DISCS
The Warning Disc™ is colored with a pattern to increase awareness of spindle rotation. Use a Warning Disc™ with a larger diameter than the cutter diameter.
Using the Warning Disc™ above the cutter helps reduce cutter exposure from the top and also deflects chips.
The Warning Disc is one part of a machine setup. Always use the proper guide devices (such as fences, guides, ball bearing rub collar, etc.), holding devices (such as jigs, hold downs, power feeders, etc.) and a Dust Shield in conjunction with the Warning Disc.
Item O.D. Price
3/4” Bore
WD2243 2-3/4 $ 35WD2283 2-7/8 $ 35 WD3003 3 $ 35WD3043 3-1/8 $ 35WD3083 3-1/4 $ 35WD3123 3-3/8 $ 35WD3163 3-1/2 $ 35WD3203 3-5/8 $ 35WD3243 3-3/4 $ 35WD3283 3-7/8 $ 35 WD4003 4 $ 35WD4043 4-1/8 $ 35WD4083 4-1/4 $ 35WD4123 4-3/8 $ 35WD4163 4-1/2 $ 35WD4203 4-5/8 $ 35WD4243 4-3/4 $ 35WD4283 4-7/8 $ 35 WD5003 5 $ 39WD5043 5-1/8 $ 39WD5083 5-1/4 $ 39WD5123 5-3/8 $ 39WD5163 5-1/2 $ 39WD5203 5-5/8 $ 39WD5243 5-3/4 $ 39WD5283 5-7/8 $ 39 WD6003 6 $ 39WD6043 6-1/8 $ 39WD6083 6-1/4 $ 39
Item O.D. Price1” Bore
WD2244 2-3/4 $ 35WD2284 2-7/8 $ 35
WD3004 3 $ 35WD3044 3-1/8 $ 35WD3084 3-1/4 $ 35WD3124 3-3/8 $ 35WD3164 3-1/2 $ 35WD3204 3-5/8 $ 35WD3244 3-3/4 $ 35WD3284 3-7/8 $ 35 WD4004 4 $ 35WD4044 4-1/8 $ 35WD4084 4-1/4 $ 35WD4124 4-3/8 $ 35WD4164 4-1/2 $ 35WD4204 4-5/8 $ 35WD4244 4-3/4 $ 35WD4284 4-7/8 $ 35 WD5004 5 $ 39WD5044 5-1/8 $ 39WD5084 5-1/4 $ 39WD5124 5-3/8 $ 39WD5164 5-1/2 $ 39WD5204 5-5/8 $ 39WD5244 5-3/4 $ 39WD5284 5-7/8 $ 39 WD6004 6 $ 39WD6044 6-1/8 $ 39WD6084 6-1/4 $ 39WD6124 6-3/8 $ 39WD6164 6-1/2 $ 39
Item O.D. Price1-1/4” BoreWD2246 2-3/4 $ 35WD2286 2-7/8 $ 35 WD3006 3 $ 35WD3046 3-1/8 $ 35WD3086 3-1/4 $ 35WD3126 3-3/8 $ 35WD3166 3-1/2 $ 35WD3206 3-5/8 $ 35WD3246 3-3/4 $ 35WD3286 3-7/8 $ 35 WD4006 4 $ 35WD4046 4-1/8 $ 35WD4086 4-1/4 $ 35WD4126 4-3/8 $ 35WD4166 4-1/2 $ 35WD4206 4-5/8 $ 35WD4246 4-3/4 $ 35WD4286 4-7/8 $ 35 WD5006 5 $ 39WD5046 5-1/8 $ 39WD5086 5-1/4 $ 39WD5126 5-3/8 $ 39WD5166 5-1/2 $ 39WD5206 5-5/8 $ 39WD5246 5-3/4 $ 39WD5286 5-7/8 $ 39 WD6006 6 $ 39WD6046 6-1/8 $ 39WD6086 6-1/4 $ 39WD6126 6-3/8 $ 39WD6166 6-1/2 $ 39WD6206 6-5/8 $ 39WD6246 6-3/4 $ 39WD6286 6-7/8 $ 39
Crown rail sticking with the crown rail jig, pattern, ball bearing rub collar and WARNING DISC.
Warning Disc
Panel Trimming using the Shapermaster, pattern, rub collar and WARNING DISC.
Warning DiscCustom Warning DiscSpecify Bore and O.D.
138 - May 2018
- 138 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVER SHAPER CUTTERSManufactured In U.S.A.
T-BUSHINGS - SPACERS - SHIMS
AM 95-012 - M 3/4" 4 .003 AM 95-020 - M 1-1/4" 4 .005 4 .010 4 .015 4 .020
39Metal
W E A V E R
Number Bore Qty Thickness
MS3 3/4" 5 .002"(Pack of 5 in 5 .003"5 Thicknesses) 5 .005" 5 .010" 5 .030"
Metal Shims $39Plastic Shims $39
Number Bore Qty Color Thickness SS3 3/4" 6 Green .003
6 Blue .005 6 Clear .0075 6 Brown .010 6 Pink .015
Shaper Essentials™flat mount - table of Contents
Page The Essentials for... 139 Shaper Essentials Flat Mount Table of Contents 140 Tenon .......................................... Coping Hold Down - Continuous Fence 141 .................................................... Air Tenon Jig - Continuous Fence 142 .................................................... Coping Hold Down - Split Fence 143 .................................................... Air Tenon Jig - Split Fence 144 Stile & Rail Sticking ..................... Sticker Plate with Hold Down 145 .................................................... Sticker Plate & Power Feeder 146 .................................................... Crown Rail Sticking - Manual Setup 147 .................................................... Sticker Guide & Fence with Hold Down 148 .................................................... Sticker Guide & Fence with Power Feeder 149 Crown Panel Trimming ............... Manual Jig 150 Panel Raising .............................. Single Raise Hold Down 151 .................................................... Single Raise Hold Down & Power Feeder 152 .................................................... Partial Offset Hold Down 153 .................................................... Partial Offset Hold Down & Power Feeder 154 Crown Rail & Panel Trimming ..... Shapermaster™ Air Jig - Dead Collar 155 .................................................... Shapermaster™ Air Jig - Bearing 156 Crown Panel Raising ................... Shapermaster™ Air Jig - Dead Collar 157 .................................................... Shapermaster™ Air Jig - Bearing 158 Crown Rail Sticking ..................... Shapermaster™ Air Jig - Dead Collar 159 .................................................... Shapermaster™ Air Jig - Bearing 160 Door Edge ................................... Continuous Fence 161 .................................................... Split Fence
WEAVER Shaper Essentials™flat mount
- 139 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 139
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVERShaper Essentials™flat mount
Tenoning
Tenoning
Example Profiled Stock - Face Down
TenonCoping Hold Down - Continuous Fence
Dust Shield
Dust Shield
Tenon Fence
Shaper Top with Groove
Manual Coping Jig
Coping Hold Down
Warning Disc
Tenon Fence
Shaper Top with Groove
Warning Disc
Tenon Setup - Flat Mounting Coping Hold Down Item# Description Price HD225W Coping Hold Down 439 FE25 Tenon Fence 269 WD Warning Disc 35 DS441F Dust Shield 199 ----------- $ 942
140 - May 2018
- 140 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVER Shaper Essentials™flat mount
Tenoning
Tenoning
Example Profiled Stock - Face Down
TenonAir Tenon Jig - Continuous Fence
Dust Shield
Dust Shield
Tenon Fence
Shaper Top with Groove
Air Tenon Jig
Air Tenon Jig
Warning Disc
Tenon Fence
Shaper Top with Groove
Warning Disc
Tenon Setup - Flat Mounting Air Tenon Jig
escriptionD Price AJ1201RW Air Tenon Jig FE27 Tenon Fence WD Warning Disc DS441F Dust Shield
Item#
1,19526935
199---------- $1,698
Tenon Setup - Flat Mounting Coping Hold Down Item# Description Price HD225W Coping Hold Down 295 FE25 Tenon Fence 179 WD Warning Disc 23 DS441F Dust Shield 195 ----------- $ 692
- 141 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 141
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVERShaper Essentials™flat mount
Tenoning
Tenoning
Example Profiled Stock - Face Down
TenonCoping Hold Down - Split Fence
Dust Shield
Dust Shield
Tenon Fence
Shaper Top with Groove
Coping Hold Down
Coping Hold Down
Warning Disc
Tenon Fence
Shaper Top with Groove
Warning Disc
Tenon Setup - Flat Mounting Coping Hold Down Item# Description Price HD225W Coping Hold Down 439 FE5628 Tenon Fence 269 WD Warning Disc 35 DS441F Dust Shield 199 ----------- $ 942
142 - May 2018
- 142 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVER Shaper Essentials™flat mount
Tenoning
Tenoning
Example Profiled Stock - Face Down
TenonAir Tenon Jig - Split Fence
Dust Shield
Dust Shield
Tenon Fence
Shaper Top with Groove
Air Tenon Jig
Air Tenon Jig
Warning Disc
Tenon Fence
Shaper Top with Groove
Warning Disc
Tenon Setup - Flat Mounting Air Tenon Jig Item# Description AJ1201RW Air Tenon Jig FE5628 Tenon Fence WD Warning Disc DS441F Dust Shield
Price
1,19526935
199---------- $1,698
Tenon Setup - Flat Mounting Coping Hold Down Item# Description Price HD225W Coping Hold Down 295 FE5628 Tenon Fence 179 WD Warning Disc 23 DS441F Dust Shield 195 ----------- $ 692
- 143 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 143
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVERShaper Essentials™flat mount
Straight Stile and Rail Sticking
Stile & Rail Edge
Sticking
Example Profiled Stock - Face Down.
Straight Sticking Setup - Flat Mounting - Sticker Plate Item# Description Price FE360H Sticker Plate Setup w/Hold Down 869 BBRC Ball Bearing Rub Collar 89 DS455F Dust Shield Crown & Straight Stile & Rails 199 WD Warning Disc 35 ---------- $1,142
Stile & Rail StickingSticker Plate with Hold Down
Dust Shield
Stock
Stock
Warning Disc
Sticker Spring Guide on Sticker
Plate
Hold Down
Spacer Board
Sticker Guide Fence
on Sticker Plate
Spacer Board
Warning Disc
Dust Shield
Sticker Spring Guide on Sticker
Plate
Sticker Guide Fence
on Sticker Plate
Steel Sticker P
late
Steel Sticker Plate
Ball BearingRub Collar
144 - May 2018
- 144 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Straight Stile and Rail Sticking
Stile & Rail Edge
Sticking
Example Profiled Stock - Face Down.
Straight Sticking Setup - Flat Mounting - Sticker Plate Item# Description Price FE360H Sticker Plate Setup w/Hold Down 869 BBRC Ball Bearing Rub Collar 89 PF721F Weaver Variable Speed Power Feeder 2,995 DS455F Dust Shield - Flat Mount 199 WD Warning Disc 35
---------- $ 4,187
Straight Stile & Rail StickingSticker Plate & Power Feeder
WEAVER Shaper Essentials™flat mount
Dust Shield
Stock
Stock
Warning Disc
Sticker Spring Guide
(on sticker plate) Spacer Board
Spacer Board
Warning Disc
Dust Shield
Sticker Spring Guide
(on sticker plate)
Sticker Guide Fence
(on sticker plate)
Power Feeder
Power Feeder
Sticker Guide Fence
(on sticker plate)
Ball Bearing
Rub Collar
- 145 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 145
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVERShaper Essentials™flat mount
Crown Rail Sticking
Stile & Rail Set (Stile Half) with eased edge groover.
Stile & Rail Edge
Crown Rail Sticking
Top Rail needs to be rough band sawed (approx. 1/8” larger than finished rail) before crown rail sticking.
Crown Rail Patterns
Crown Rail Sticking Setup - Flat Mount - Manual Jig Item# Description Price BBRC Ball Bearing Rub Collar 89 PA427 Hardwood Patterns 1-1/2” Crown Rail 265 JM330 Crown Rail Jig 465 DS455F Dust Shield for Curved & Straight Rail 199 WD Warning Disc 35 --------- $1,05 3
Crown Rail StickingManual Setup
Dust Shield
Dust Shield
Crown Rail Jig
Crown Rail Jig
Warning Disc
Ball Bearing Rub Collar
Pattern
Warning Disc
Pattern
Ball Bearing Rub Collar
Stock
Stock
146 - May 2018
- 146 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVER Shaper Essentials™flat mount
Straight Stile and Rail Sticking
Stile & Rail Edge
Sticking
Example Profiled Stock - Face Down.
Straight Sticking Setup - Flat Mounting - Guide & Fence Item# Description Price FE211 Sticker Spring Guide 329 FE213H Sticker Guide Fence with Hold Down 359 DS455F Dust Shield Crown & Straight Stile & Rails - Flat Mount 199 WD Warning Disc 35 ---------- $ 922
Straight Stile & Rail StickingSticker Guide & Fence with Hold Down
Dust Shield
Stock
Stock
Warning Disc
Sticker Spring Guide
Hold Down
Spacer Board
Sticker Guide Fence
Spacer Board
Warning Disc
Dust Shield
Sticker Spring Guide
Sticker Guide Fence
- 147 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 147
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Straight Stile and Rail Sticking
Stile & Rail Edge
Sticking
Example Profiled Stock - Face Down.
Straight Sticking Setup - Flat Mounting - Guide & Fence Item# Description Price FE211 Sticker Spring Guide 329 FE213H Sticker Guide Fence with Hold Down 359 PF721F Weaver Variable Speed Power Feeder 2,995 DS450F Dust Shield - Flat Mount 199 WD Warning Disc 35
---------- $ 3,917
Straight Stile & Rail StickingSticker Guide & Fence with Power Feeder
WEAVERShaper Essentials™flat mount
Dust Shield
Stock
Stock
Warning Disc
Sticker Spring Guide
Spacer Board
Sticker Guide Fence
Spacer Board
Warning Disc
Dust Shield
Sticker Spring Guide
Sticker Guide Fence
Power Feeder
Power Feeder
Sticker Guide Fence
148 - May 2018
- 148 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Crown Panel TrimmingManual Jig
Straight Sticking Setup - Flat Mounting - Guide & Fence Item# Description Price FE211 Sticker Spring Guide 219 FE213H Sticker Guide Fence with Hold Down 239 PF721F Weaver Variable Speed Power Feeder 1,995 DS450F Dust Shield - Flat Mount 195 WD Warning Disc 23 ---------- $ 2,671
WEAVER Shaper Essentials™flat mount
Panel Trimming
Panel Trimming
Panel Stock will need to be rough band sawed (approx. 1/8” larger than finished panel) before crown panel trimming.
Hardwood Panel Pattern Set
Pan
el T
rimm
ing
Edg
e
Panel Trimming Setup - Flat Mounting - Manual Jig Item# Description Price JM310 Manual Crown Panel Jig 495 PA417 Hardwood Patterns - 1-1/2” Crown Panel 265 FRE8389 Panel Trimming Cutter 2W Carbide Square Edge 249 BB Ball Bearing Rub Collar 89 DS472F Dust Shield for Panel Trimming 199 WD Warning Disc 35 ---------- $1,33 2
Dust Shield
Crown Panel Jig
Warning Disc
Warning Disc
Stock
Dust Shield
Ball Bearing Rub Collar
Stock
Ball BearingRub Collar
Crown Panel Jig
Pattern
Pattern
Cutter
Cutter
- 149 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 149
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Panel Raising - Crown Setup
Crown Panel Raising
Panel RaisingSingle Raise with Hold Down
WEAVERShaper Essentials™flat mount
Panel Raising Setup - Flat Mounting - Single Raise with Hold Down Item# Description Price RPA0128 Raised Panel Guides 249 HD4300FS Raised Panel Hold Down 349 DS497S Dust Shield for Raised Panel 299 BBRC Ball Bearing Rub Collar 89 WD Warning Disc 39 --------- $1,025
Dust Shield
Guides
Warning Disc
Warning Disc
Raised PanelHold Down
Stock
Dust Shield
Dust Shield
Warning Disc
Raised PanelHold Down
Stock
Guide: Infeed Side(Outfeed side removed for crown)
Guides
Raised PanelHold Down
Ball BearingRub Collar
Crown Panel Raising:
Straight Panel Raising:
150 - May 2018
- 150 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Panel Raising - Crown Setup
Crown Panel Raising
Panel Raising Setup - with Power Feeder Flat Mounting - Single Raise with Hold Down Item# Description Price PF721F Weaver Variable Speed Power Feeder 2,995 RPA0128 Raised Panel Guides 249 HD4300FS Raised Panel Hold Down 349 DS497S Dust Shield for Raised Panel 299 BBRC Ball Bearing Rub Collar 89 WD Warning Disc 39
--------- $ 4,020
Panel RaisingSingle Raise with Hold Down & Power Feeder
WEAVER Shaper Essentials™flat mount
Dust Shield
Guides
Warning Disc
Warning Disc
Raised PanelHold Down
Stock
Power Feeder
Dust Shield
Warning Disc
Raised PanelHold Down
Stock
Guide: Infeed Side(Outfeed side removed for crown)
Guides
Raised PanelHold Down
Ball BearingRub Collar
Crown Panel Raising: Power Feeder Lited Up.
Straight Panel Raising: Power Feeder in Working Position
Power Feeder
Power Feeder
- 151 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 151
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Crown Panel Raising
Panel RaisingPartial Offset with Hold Down
WEAVERShaper Essentials™flat mount
Panel Raising - Crown Setup
Panel Raising Setup - Flat Mounting - Partial Offset with Hold Down Item# Description Price RPA0228 Offset Raised Panel Guides 249 HD4300FS Raised Panel Hold Down 349 DS497S Dust Shield for Raised Panel 299 BBRC Ball Bearing Rub Collar 89 WD Warning Disc 39 --------- $1,025 Dust Shield
Guides
Warning Disc
Warning Disc
Raised PanelHold Down
Stock
Dust Shield
Dust Shield
Warning Disc
Raised PanelHold Down
Stock
Guide: Infeed Side(Outfeed side removed for crown)
Guides
Raised PanelHold Down
Ball BearingRub Collar
Crown Panel Raising:
Straight Panel Raising:
152 - May 2018
- 152 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Crown Panel Raising
Panel Raising - Crown Setup
Panel Raising Setup - with Power Feeder Flat Mounting - Partial Offset with Hold Down Item# Description Price PF721F Weaver Variable Speed Power Feeder 2,995 RPA0228 Offset Raised Panel Guides 249 HD4300FS Raised Panel Hold Down 349 DS497S Dust Shield for Raised Panel 299 BBRC Ball Bearing Rub Collar 89 WD Warning Disc 39
--------- $ 4,020
Panel RaisingPartial Offset with Hold Down & Power Feeder
WEAVER Shaper Essentials™flat mount
Dust Shield
Guides
Warning Disc
Warning Disc
Raised PanelHold Down
Stock
Power Feeder
Dust Shield
Warning Disc
Raised PanelHold Down
Stock
Guide: Infeed Side(Outfeed side removed for crown)
Guides
Raised PanelHold Down
Ball BearingRub Collar
Crown Panel Raising: Power Feeder Lited Up.
Straight Panel Raising: Power Feeder in Working Position
Power Feeder
Power Feeder
- 153 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 153
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVERShaper Essentials™flat mount
Panel Trimming
Plexiglass Rail & Panel Pattern Set
Rail & Panel Trimming
Crown Rail & Panel TrimmingShapermaster™ Air Jig - Dead Collar
Rail & Panel Trimming Setup - Flat Mounting - Air Jig Item# Description Price AJ2402 Shapermaster 24” x 12” 1,995 PA2417 Plexiglass Patterns - 1-1/2” Crown Rail & Panel 379 C9936V Trimming Cutter (stacked square edge) 365 DC Double OD Trimming Dead Collar 149 FE77 Right Half of Split Fence with Depth Bolt 119 DS470F Dust Shield for Rail & Panel Trimming with Shapermasters 199 WD4086 Warning Disc 4-1/ 4”ODx1-1/4”ID 35
---------- $ 3,241
Dust Shield
Warning Disc
Warning Disc
Stock
Dust Shield
Dead Collar
Stock
Fence Right Half of Split Fence with Depth Bolt
Dead Collar
Shapermaster Air Jig
Pattern
Pattern
Fence Right Half of Split Fence with Depth Bolt
Shapermaster Air Jig
Cutter
Cutter
154 - May 2018
- 154 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVER Shaper Essentials™flat mount
Panel Trimming
Plexiglass Rail & Panel Pattern Set
Rail & Panel Trimming
Rail & Panel Trimming Setup - Flat Mounting - Air Jig Item# Description Price AJ2402 Shapermaster 24” x 12” 1,995 PA2417 Plexiglass Patterns - 1-1/2” Crown Rail & Panel 379 C9936V Trimming Cutter (stacked square edge) 365 BB3146 Ball Bearing Rub Collar 89 BBRC Ball Bearing Rub Collar 89 FE77 Right Half of Split Fence with Depth Bolt 119 DS470F Dust Shield for Rail & Panel Trimming with Shapermasters 199 WD4086 Warning Disc 4-1/ 4”ODx1-1/4”ID 35
---------- $3,270
Crown Rail & Panel TrimmingShapermaster™ Air Jig - Bearing
Dust Shield
Warning Disc
Warning Disc
Stock
Dust Shield
Ball Bearing Rub Collar
Stock
Fence Right Half of Split Fence with Depth Bolt
Ball BearingRub Collar
Shapermaster Air Jig
Pattern
Pattern
Fence Right Half of Split Fence with Depth Bolt
Shapermaster Air Jig
Cutter
Cutter
- 155 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 155
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
WEAVERShaper Essentials™flat mount
Plexiglass Rail & Panel Pattern Set
Crown Panel Raising
Crown Panel Raising Setup - Flat Mounting - Air Jig Item# Description AJ2402 Shapermaster 24” x 12” PA2417 Plexiglass Patterns - 1-1/2” Crown Rail & Panel DC Dead Collar
FE78 Right Half of Split Fence DS470F Dust Shield for Rail & Panel with Shapermasters WD4086 Warning Disc 4-1/ 4”ODx1-1/4”ID
Price
1,995
379129119
19939
---------- $ 2,860
Crown Panel RaisingShapermaster™ Air Jig - Dead Collar
Example Profiled Stock - Face Up.
Dust Shield
Warning Disc
Warning Disc
Stock
Dust Shield
Dead Collar
Stock
Fence Right Half of Split Fence
Dead Collar
Shapermaster Air Jig
Pattern
Pattern
Fence Right Half of Split Fence with Depth Bolt
Shapermaster Air Jig
Note: Panel Pattern Set for Crown Panel operation
156 - May 2018
- 156 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Crown Panel Raising
WEAVER Shaper Essentials™flat mount
Plexiglass Rail & Panel Pattern Set
Crown Panel Raising
Crown Panel Raising Setup - Flat Mounting - Air Jig Item# Description AJ2402 Shapermaster 24” x 12” PA2417 Plexiglass Patterns - 1-1/2” Crown Rail & Panel BBRC Ball Bearing Rub Collar
FE78 Right Half of Split Fence DS470F Dust Shield for Rail & Panel with Shapermasters WD4086 Warning Disc 4-1/ 4”ODx1-1/4”ID
Price
1,995
37989
119
19939
---------- $ 2,860
Example Profiled Stock - Face Up.
Crown Panel RaisingShapermaster™ Air Jig - Bearing
Stock
Dust Shield
Warning Disc
Warning Disc
Stock
Dust Shield
Ball Bearing Rub Collar
Stock
Fence Right Half of Split Fence
Ball BearingRub Collar
Shapermaster Air Jig
Pattern
Pattern
Fence Right Half of Split Fence with Depth Bolt
Shapermaster Air Jig
Note: Panel Pattern Set for Crown Panel operation
- 157 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 157
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Crown Panel Raising
WEAVERShaper Essentials™flat mount
Plexiglass Rail & Panel Pattern Set
Crown Rail Sticking
Crown Rail Sticking Setup - Flat Mounting - Air Jig Item# Description AJ2402 Shapermaster 24” x 12” PA2417 Plexiglass Patterns - 1-1/2” Crown Rail & Panel DC Dead Collar
FE78 Right Half of Split Fence DS470F Dust Shield for Rail & Panel with Shapermasters WD4086 Warning Disc 4-1/ 4”ODx1-1/4”ID
Price
1,995
379129119
19935
---------- $ 2,856
Stile & Rail Edge
Example Profiled Stock - Face Down.
Crown Rail StickingShapermaster™ Air Jig - Dead Collar
Dust Shield
Warning Disc
Warning Disc
Stock
Dust Shield
Dead Collar
Stock
Fence Right Half of Split Fence
Dead Collar
Shapermaster Air Jig
Pattern
Pattern
Fence Right Half of Split Fence
Shapermaster Air Jig
Note: Rail Pattern Set for Crown Rail operation.
158 - May 2018
- 158 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Crown Rail Sticking
WEAVER Shaper Essentials™flat mount
Plexiglass Rail & Panel Pattern Set
Crown Rail Sticking
Crown Rail Sticking Setup - Flat Mounting - Air Jig Item# Description AJ2402 Shapermaster 24” x 12” PA2417 Plexiglass Patterns - 1-1/2” Crown Rail & Panel BBRC Ball Bearing Rub Collar
FE78 Right Half of Split Fence DS470F Dust Shield for Rail & Panel with Shapermasters WD4086 Warning Disc 4-1/ 4”ODx1-1/4”ID
Price
1,995
37989
11919935
---------- $ 2,856
Stile & Rail Edge
Example Profiled Stock - Face Down.
Crown Rail StickingShapermaster™ Air Jig - Bearing
Dust Shield
Warning Disc
Warning Disc
Stock
Dust Shield
Ball Bearing Rub Collar
Stock
Fence Right Half of Split Fence
Ball BearingRub Collar
Shapermaster Air Jig
Pattern
Pattern
Fence Right Half of Split Fence
Shapermaster Air Jig
Note: Rail Pattern Set for Crown Rail operation.
- 159 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 159
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Crown Rail Sticking
WEAVERShaper Essentials™flat mount
Doo
r Edg
e
Door Edge - Continuous Fence
Continuous Fence
Door Edge Setup - Flat Mount - Continuous Fence (face up) Item# Description Price FEDE Continuous Door Edge Fence 40” 299 HD3160 General Hold Down 299 HD222 Drawer Ends Hold Down 299 DS480F Dust Shield for Door Edge 299 WD5086 Warning Disc 35 --------- $1,231
Door EdgeContinuous Fence
Dust Shield
Drawer Front Jig
FenceWarning Disc
Warning Disc
Hold Down
Stock
Dust Shield
Dust Shield
Warning Disc
Hold Down Stock
Fence
Fence
groove in shaper top
Hold Down
160 - May 2018
- 160 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
WEAVER Shaper Essentials™flat mount
Doo
r Edg
e
Door Edge - Split Fence
Door Edge Setup - Flat Mount - Split Fence (for full edge) Item# Description Price FE5640 Split Door Edge Fence w/Dual Adj. 299 HD3160 General Hold Down 299 HD222 Drawer Ends Hold Down 299 DS482F Dust Shield for Door Edge 299 WD5086 Warning Disc 35 --------- $1,231
Door EdgeSplit Fence
Dust Shield
Drawer Front Jig
Fence
Warning Disc
Warning Disc
Hold Down
Stock
Dust Shield
Dust Shield
Warning Disc
Hold Down Stock
Fence
Fence
groove in shaper top
Hold Down
- 161 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 161
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
162 - May 2018
- 163 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 163
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
RolleR to Belt
FEEDER BELTS & CONVERSION KITS- for all your power feeders -
You can convert your roller feeder into a BELT FEEDER!
1-800-255-6214
Many Ro l l e r Feede rs can be conve r ted to bel t s tock feeders. Simply give us the on-center measurements and we wi l l do our best to supply you with a conversion kit.
To Improve your production - Call TODAY
Made in the USA
Secure, Full Contact Grip
PowerRated
V-Belt
POWER RATED
STRONG - CONTINUOUS DUTY
SECURE GRIP
FULL CONTACT
SATISFACTION GUARANTEED!
Convert Your Conventional Roller Feederto a Continuous Belt Feeder!
WEAVER POWER FEEDER BELTSBelts for Weaver Power FeedersItem No. Description Price
FBB2681 Single Wide Feeder Belt (3/4”) - fits in one pulley groove. $ 74.00 FBB2682 Double Wide Feeder Belt - Wider (1-1/2”), fits over two pulley grooves. $179.00
Feeder Conversion Kits3 Pulley:ITEM # FK3-CUSTOM $ 419
(Includes 2 single bond belts (3/4”) & 3 double V-pulleys)
ITEM # FK3W-CUSTOM $ 465(Includes 1 Double bond belt (1-1/2”) & 3 double V-pulleys)
4 Pulley:ITEM # FK4-CUSTOM $ 524
(Includes 2 single bond belts (3/4”) & 4 double V-pulleys)
ITEM # FK4W-CUSTOM $ 570(Includes 1 Double bond belt (1-1/2”) & 4 double V-pulleys)
Replacement Beltsfor your non-Weaver belt power feeder
For 3 Pulley Kit:ITEM # FB3-CUSTOM - $ 99 each
(3/4” Wide belt)
ITEM # FB3W-CUSTOM - $219 each(1-1/2” Wide belt)
For 4 Pulley Kit:ITEM # FB4-CUSTOM - $119 each
(3/4” Wide belt)
ITEM # FB4W-CUSTOM - $254 each(1-1/2” Wide belt) Power Feeder Rollers
Item# Arbor Width OD PricePFXMEC296 13/8” 25/16” 411/16” $23
Power Feeder Rollers
FEEDER BELTS & CONVERSION KITSManufactured
In U.S.A. WEAVER
164 - May 2018
- 164 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
VARIABLE SPEED POWER FEEDER
Hand knobs - quick to
adjust
300-lb. Torque Motor
Continuous Duty (runs 8 hours a day)Forward / Reverse
Variable Speed(0-50 ft. per min.)
Works Anywhere - 110 Volts
Belt guard covers pulleys & belts
Hinged for quick removal
Angle of belts are easily adjusted - feed stock into fence or away from fence.
Industrial Machine Economically Priced
If you want to improve the cutting quality of your shaper and cutters - the Variable Power Feeder is a variable speed device that allows you to get the best possible cut. Because you can match the feed speed to the material!
With an extra set of Mounting Brackets you can easily move the Power Feeder from one machineto another!
PFX7622W . . . . . . . . . . . .$399.00
WEAVER
It’s easily lifted out of the way to use jig, shaper or to change cutters - in less than
15 Seconds!
Sets back out of the way
Feeder can set back up in less than 15
seconds
PF721W - Variable Speed Belt Power Feeder . . . . .$2,995
Variable Speed Power Feeder is ideal for running mold-ings because you can vary the speed for the type of
material and depth of cut.
Manufactured In U.S.A.
Great for Sticking Stiles and Rails.
Handles Straight Panel Raising
- 165 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 165
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
STICKING STILES AND BOTTOM RAIL
Warning Disc above sticking cutter
HD216 Hold Down - comes with the sticker plate(mounted from the front of the plate)
Placement Pins
Sticker Plate
STICKER SETUP PLATE WEAVERManufactured
In U.S.A.
IPAGES-ACC
Hold Downs & Power Feeder Notes:
STICKING STILES AND BOTTOM RAIL
Straight Sticking - sticker plate setup (FE360)
The Sticker Spring guide Set-up is designed to achieve a top quality cut by running your material against a fence opposite the cutter, which sizes all your stiles and straight rails and gives you a smooth cut without burns or bumps in the material.
Sticker Plate folded down after use -al-lowing your shaper to be used for other
tasks - such as crown rail sticking - without adjusting the spindle or cutters!
Stile Stock
Sticking Cutter
Sticking Spacer Board
Stock
HD216 Univ. General Hold Down - Included w/
Sticker PlateSticker Guide Fence
Placement Pins
Fence in line with cutters
Sticker Spring Guide
Steel Plate
FE360H Sticker Set-up 11/4” Bore Cutters FE363H Sticker Set-up
$869
$869 3/4” Bore Cutters
FE360H Sticker Setup
SpacerBoard
Placement Pins 28”
Sticker Setup Plate
166 - May 2018
- 166 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
TENON FIXTURE & COPING HOLD DOWN WEAVERManufactured
In U.S.A.
1. The tenon bar that travels in your shaper top groove can be mounted in four locations on the Air Tenon Jig. Making it adaptable to almost all shapers. The tenon bar itself is 3/4” wide x 3/8” tall.
2. The Air Cushion is controlled by a flow-valve thus allowing you to control the ease of operation.
3. A backup wood block can be fastened to the side handle to help minimize chipping.
The Tenon Fixture travels in your shaper table’s miter groove on an air cushion for an effortless operation. It operates at around 90 PSI. It will handle a rail up to 11 7/8” wide to 2 1/4” thick.
Coping Hold Down
6” (HD225W) shown HD226W for up to 10” wide rails
Tenon Cut
Item No. Description HD225W For up to 6” wide rails HD226W For up to 10” wide rails
Price $439 $569
Coping Hold DownAdjustment Bolt for stock thickness - for hand hold.
IPAGES-ACC-tenon-cope
AJ1201RW Air Tenon Fixture $1,195
AJ1201LW Left Air Tenon Fixture $1,195
Item No. Description Price
(for counterclockwise cutter rotation)
(for clockwise cutter rotation)
AIR TENON FIXTURE
New
Design
No Ex
pose
d Air
Lines
GLIDES ON AIR CUSHION!
Use for cabinet door tenons & house door tenons.
To help minimize chipping ofthe wood, there is a backupwood block. To protect yourwood from marring there isa rubber pad on the steelpressure plate.
Dust Shield
Tenon Fence
Warning Disc above tenon cutters
Coping Hold Down
Shap
er To
p Gro
ove
May 2018 - 167
168 - May 2018
- 168 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
For regular use with #PA422 and/or #PA423 French style patterns.
Item No. Description Price JM322 JM323
Right Self Centering French Rail Jig$523Left Self Centering French Rail Jig $523
CROWN PANEL JIGS This jig features a built-in rack and pinion gear centering device for cabinet doors (18” opening for panel).
CROWN DOOR JIGS & PATTERNSWEAVERPage 1 of 2
HOW It WORkS
Item No. Description JM310 Crown Panel Jig
Price$569
These jigs will also cut in half the number of times your employees will have to use their ruler, saving you untold hours of time spent measuring and doing arithmetic. Now you and your employees can spend more time actually producing crown raised panel doors.
CROWN DOOR JIGS ARE FAStER Just imagine, with these SELF-CENTERING JIGS you will not have to divide 177/16” by 2 or 1115/16” by 2 or 95/16” by 2, and so on.
CROWN DOOR JIGS ARE MORE ACCURAtE The 10 Crown Panel and 10 Crown Rail hardwood patterns for doors 91/2” to 22” enables you to give the custom look, and you will know that the panel and crown rail will fit properly, You can make doors to match in proportion for the different door sizes. Plus, the accurate centering devices and interchangeable patterns make it easy to change the sizes and styles of the panel and rail.
Rack and Pinion Centering Device
Centering Knob
SPECIAL FRENCH RAIL JIGS
Item No. Description JM330 Crown Rail Jig
Price$523
IPAGES-AC-JM
For occasional use with #PA422 and/or #PA423 French style patterns.
Item No. Description JM321 Straight Self Centering French
Price$523
Rail JigCustom Jig . . . . . . add $20 per inch for larger panel jig opening, add $10 per inch for larger rail jig opening.
CROWN RAIL JIGS This jig features a built-in rack and pinion gear centering device for cabinet doors (18” opening for rail).
Note: In some of our pictures and illustrations the warning discs, Dust Shields, and some accessories have beenremoved for better illustration of the cutter and work.
- 169 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 169
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
2. Use jig #JM310 to center panel to pattern, then trace pattern detail on panel. Place crown panel pattern in notch on bottom and crown panel material on the top. After tracing remove panel from jig and band saw panel approximately 1/4” larger than pattern detail.
WEAVERPage 2 of 2
HoW It WoRks CROWN DOOR JIGS & PATTERNS
sHAPING CRoWN RAIL1. Tenoning the ends of the top crown rail before shaping the crown rail will reduce end grain chip-out.
5. Use the left front corner of the pattern to stop the bearing before shaping. The cutters will size top rail to pattern and detail the edge of the rail.
4. Place top rail in jig #JM330 and the appropriate rail pattern in jig. By turning center knob, jig will self center top rail to the pattern. Tighten center lock nut and toggle clamps.
3. Set shaper up with sticking part of the door cutter set, ball bearing rub collar, warning disc and a Dust Shield.
2. Use jig #JM330 to center rail to pattern, then trace pattern shape on rail. Place crown rail material on the bottom and crown rail pattern in notch on top. After tracing remove rail from jig and band saw rail approximately1/8” larger than pattern detail.
sHAPING CRoWN PANEL1. Pre-cut panel material to desired size before shaping the crown panel.
5. Start on the left front of pattern and run pattern against rub collar or use pattern to stop the bearing before shaping. The square edge cutter shapes the panel to pattern.
4. Place the appropriate panel pattern in jig #JM310 - and the panel on top. The panel is centered by pulling the left or right handle in while holding the top edge of the panel and pattern flush. Push down both left and right cam levers to clamp panel to pattern and jig.
3. Set up shaper with dead collar or ball bearing rub collar, square edge cutter, warning disc and a Dust Shield.
JM330 Crown Rail Jig
JM310 Crown Panel Jig
(a c
row
n pa
nel p
atte
rn o
n th
e jig
)
IPAGES-AC-JM
To order custom Ball Bearing Rub Collars order #BB5400. State both Outside Diameter and Bore Size.
Note: In some of our pictures and illustrations the warn-ing discs, Dust Shields, and some accessories have been
removed for better illustration of the cutter and work.
WEAVER’S BALL BEARING RUB COLLARS WORK WELL FOR DOING CROWN DOORS, ARCH MOLD-ING AND OTHER CURVED WORK. Standard & cus-tom ball bearing rub collars available. See bearing page 136.
170 - May 2018
- 170 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Weaver’s Rail and Panel Patterns give flexibility to produce multiple styles and shapes of Cabinet Doors, Finished Cabinet Ends, Island and Appliance Fronts. Our patterns allow you to offer the high style “Custom Look” in kitchen cabinetry. Patterns are interchangeable for making doors 91/2” to 22” wide.
HARDWOOD RAIL and PANEL PATTERN SETSWEAVER
Hardwood Panel Patterns for Manual Jigs
Hardwood Rail Patterns For Manual Jigs
Put the best to work in your shop... with Weavers!
Crown 1-1/2” Rise - the most popular style requested. They are used with a 11/2” rise with 33/4” top rail.
most popular style requested. They are used with 41/4” top rail and have a 2” rise.
Crown 2” Rise - The traditional crown patterns offer the
Oval 1” Rise - The oval patterns are the second most requested style. The point to point arc produces varying widths at the ends of the rail. They are used with 31/4” top rail and have a 1” rise.Note: The oval produces a higher percentage of chip out on the outfeed point.
Oval 2” Rise - The oval patterns are the second most requested style. The point to point arc produces varying widths at the ends of the rail. They are used with 41/4” top rail and have a 2” rise.Note: The oval produces a higher percentage of chip out on the outfeedpoint.
Classical - The Classical patterns offer an extra flourish to the crown raise. They are used with a 41/4” top rail and have a 2” rise.
Neoclassic - The neoclassic patterns offer a special blend of a soft oval with flat side shoulders. They are used with a 31/4” top rail and have a 1” rise with this pattern.
French - The French patterns are popular in entertainment centers with side-by-side doors. They are used with a 43/4” top rail and have a 21/2” rise.
Country French - The Country French patterns offer a flat center with a radius on the edge. They are used with a 41/4” top rail and have a 2” rise.
Modern French - The Modern French patterns are popular in entertainment centers with side-by-side doors. They are used with 43/4” top rail and have a 21/2” rise.
PA428 12 Oval French Rail Patterns PA418 12 Oval French Panel Patterns
$295$295
Item No. Description Price
PA423 10 Modern French Rail Patterns PA413 10 Modern French Panel Patterns
$265$265
Item No. Description Price
PA419 12 Country French Rail Patterns PA409 12 Country French Panel Patterns
$295$295
Item No. Description Price
PA422 10 French Rail Patterns PA412 10 French Panel Patterns
$265$265
Item No. Description Price
PA421 12 Neoclassic Rail Patterns PA411 12 Neoclassic Panel Patterns
$295$295
Item No. Description PricePA4244 12 Classical Rail Patterns PA414 12 Classical Panel Patterns
$295$295
Item No. Description Price
PA426 12 Oval Rail Patterns 2” PA416 12 Oval Panel Patterns 2”
$295$295
Item No. Description PricePA425 12 Oval Rail Patterns 1” PA415 12 Oval Panel Patterns 1”
$295$295
Item No. Description Price
PA420-12 12 Crown Rail Patterns - 2” PA410-12 12 Crown Panel Patterns - 2”
$295$295
Item No. Description PriceItem No. Description Price
PA427 10 Crown Rail Patterns - 11/2” PA417 10 Crown Panel Patterns - 11/2”
$265$265
Oval French - The Oval French patterns offer a arch like the oval - 2” rise. They areused with 41/4” top rail and have a 2” rise.
- 171 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 171
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
PA428 12 Oval French Rail Patterns $169PA418 12 Oval French Panel Patterns $169
Item No. Description Price
PA419 12 Country French Rail Patterns $169PA409 12 Country French Panel Patterns $169
Item No. Description Price
PA421 12 Neoclassic Rail Patterns $169PA411 12 Neoclassic Panel Patterns $169
Item No. Description Price
PA426 12 Oval Rail Patterns 2” $169PA416 12 Oval Panel Patterns 2” $169
Item No. Description Price
PA420-12 12 Crown Rail Patterns - 2” $169PA410-12 12 Crown Panel Patterns - 2” $169
Item No. Description Price
INCREASE CONTROL The reason is the pneumatic clamps hold the material to the Shapermaster and the operator holds on to the handles of the Shapermaster.
FLEXIBILITY The Shapermaster gives you an excellent tool to produce many parts of a door. The Shapermaster accepts material up to 21/4” thick by 231/2”.
EASY TO OPERATE The Shapermaster glides on a cushion of air, mak-ing it easy to maneuver, and yet the Shapermaster has enough mass and stability to consistently shape smoothly. The Shapermaster requires 80 to 120 PSI when activated.
SELF CENTERING By turning the center knob the Shapermaster brings the work to the center to match with the pattern. The Shapermasters pattern holder has a centering pin to index the patterns.
PATTERN SETS Shapermaster has 10 different pattern styles available. Each style has the proper number of patterns to make doors from 91/2” to 27” with the 24” Jig.
IRREGULAR SHAPES If you are cutting curved parts you need to con-sider the Shapermaster, there is not an easier way to cut a curves on a shaper. Tame your Shaper !! Order the Shapermaster.
GLIDESON AN
AIR CUSHIONSHAPERMASTER
PNEUMATIC CROWN DOOR FIXTURE SYSTEM
TAMING THE SHAPER:
IPAGES-AC-AJ-24
24” Shapermaster
SHAPERMASTER™ AIR JIGS
SHAPERMASTERS™
Air Jig - 24” Wide, 12” front to back #AJ2402 - $1,995!
Our Most Popular Jig
come with tenon back up bar, index bar for stiles and rails, blow out bar for panels, 2 brake stops for ball bearing rub collars, allen wrenches and instruc-tion manual.
Item No. Description PriceAJ2402 24” opening, 12” front to back $1,995
172 - May 2018
- 172 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Pressure Bar Height Adjusting Knobs
Notched clear plexiglass patterns automatically centered to pin, see your work while using the pattern. We have 10 different styles to choose from.
On/Off valve
Air flow control valve
Formed hand grips
Long lasting brake pad material to stop ball bearing rub collars
Easy to reach mate-rial centering knob - Turns rack and pinion gear centering device
Pin to center patterns fast and accurate
ShapingCrown Rails
Air Crown Door Jigs$1,995
Item # AJ2402
Specially de-signed center tabs to help square panel and catch edge of pre-tenoned stock 1/2” grid lines accurate visual line up of panels
24”
Raising Crown Panel
GLIDESON AN
AIR CUSHIONSHAPERMASTER
PNEUMATIC CROWN DOOR FIXTURE SYSTEM
Sliding panel blow out block (for rails, there is a guide w/thumbscrews as well)
IPAGES-AC-AJ
24” Shapermaster
Shapermaster encompasses several productivity improving features. The built-in centering device centers arched rail and panel parts with a turn of a wheel on the top of the jig. No more centering measurements. Parts are held firmly by two air cylinders which exert force on a neoprene rubber covered pressure bar. Shapermaster’s versatility enables you to make custom door designs by the fabrication of tem-plates of your own design out of plexiglass or ¼” hardboard. The adjustable brakes on each edge of the fixture stop the ball bearing from spinning and burning the template.
VERSATILITY / PRODUCTIVITY / EFFICIENCY
Note: In some of our pictures and illustrations the warn-ing discs, Dust Shields, and some accessories have been
removed for better illustration of the cutter and work.
Air Inlet
- 173 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 173
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Weaver’s Rail and Panel Patterns give flexibility to produce multiple styles and shapes of Cabinet Doors, Finished Cabinet Ends, Island and Appliance Fronts. Our patterns allow you to offer the high style “Custom Look” in kitchen cabinetry. Patterns are interchangeable for making doors 91/2” to 27” wide.
Put the best to work in your shop... with Weavers!
WEAVER
Modern French - The Modern French patterns are popular in entertainment centers with side-by-side doors. They are used with 43/4” top rail and have a 21/2” rise.
French - The French patterns are popular in entertainment centers with side-by-side doors. They are used with a 43/4” top rail and have a 21/2” rise.
Classical - The Classical patterns offer an extra flourish to the crown raise. They are used with a 41/4” top rail and have a 2” rise.
Oval 1” Rise - The oval patterns are the second most requested style. The point to point arc produces varying widths at the ends of the rail. They are used with 31/4” top rail and have a 1” rise.Note: The oval produces a higher percentage of chip out on the outfeed point.
Crown 1-1/2” Rise - the most popular style requested. They are used with a 11/2” rise with 33/4” top rail.
24”
PA2413 12 Rail 12 Panel Patterns 24” $379 Item No. Description Width Price
PA2412 12 Rail 12 Panel Patterns 24” $379Item No. Description Width Price
PA2414 18 Rail 18 Panel Patterns 24” $489 Item No. Description Width Price
PA2415 18 Rail 18 Panel Patterns 1” 24” $489Item No. Description Width Price
Item No. Description Width Price
PA2417 12 Rail 12 Panel Patterns 11/2” 24” $379
Oval French - The Oval French patterns offer a arch like the oval - 2” rise. They are used with a 41/4” top rail and have a 2” rise.
Country French - The Country French patterns offer a flat center with a radius on the edge. They are used with a 41/4” top rail and have a 2” rise.
Neoclassic - The neoclassic patterns offer a special blend of a soft oval with flat side shoulders. They are used with a 31/4” top rail and have a 1” rise with this pattern.
Oval 2” Rise - The oval patterns are the second most requested style. The point to point arc produces varying widths at the ends of the rail. They are used with 41/4” top rail and have a 2” rise.Note: The oval produces a higher percentage of chip out on the outfeedpoint.
most popular style requested. They are used with 41/4” top rail and have a 2” rise.
Crown 2” Rise - The traditional crown patterns offer the
PA2418 18 Rail 18 Panel Patterns 24” $489
Item No. Description Width Price
PA2409 18 Rail 18 Panel Patterns 24” $489
Item No. Description Width Price
PA2411 18 Rail 18 Panel Patterns 24” $489 Item No. Description Width Price
PA2416 18 Rail 18 Panel Patterns 2” 24” $489
Item No. Description Width Price
Item No. Description Width Price
PA2410-18 18 Rail 18 Panel Patterns 2” 24” $489
24”
24”
24”
24”
24”
24”
24”
24”
24”
EXIGLASS RAIL & PANEL PATTERN SETSPLFor 24” Shapermaster
174 - May 2018
- 174 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
GLIDESON AN
AIR CUSHIONSHAPERMASTER
PNEUMATIC CROWN DOOR FIXTURE SYSTEM19” Shapermaster
SHAPERMASTER™ AIR JIGS
ShapermaSterS™
Air Jig - 19” Wide, 8” front to back #aJ1900 - $1,695!
come with tenon back up bar, index bar for stiles and rails, blow out bar for panels, 2 brake stops for ball bearing rub collars, allen wrenches and instruc-tion manual.
Item No. Description PriceAJ1900 19” opening, $1,695 8” front to back.
Great for smaller shaper tops
INCREASE CONTROL - FLEXIBILITY - EASY TO OPERATE - SELF CENTERING - GOOD VARIETY OF PATTERN SETS -HELPFUL ON IRREGULAR SHAPES
Shapermaster encompasses several productivity improving features. The built-in centering device centers arched rail and panel parts with a turn of a wheel on the top of the jig. No more centering measurements. Parts are held firmly by two air cylinders which exert force on a neoprene rubber covered pressure bar. Shapermaster’s versatility enables you to make custom door designs by the fabrication of templates of your own design out of plexiglass or ¼” hardboard. The adjustable brakes on each edge of the fixture stop the ball bearing from spinning and burning the template.
VERSATILITY / PRODUCTIVITY / EFFICIENCY
IPAGES-AC-AJ-19
Notched plastic patterns automati-cally centered to pin, see your work yet be pro-tected. 10 different styles to choose from
On/Off Valve
Air flow control valve
Formed hand grips
Long lasting brake pad material to stop ball bearing rub collars
Easy to reach material centering knob Turns rack and pinion gear centering device
Pin to center patterns fast and accurate.
Specially designed center tabs to help square panel and catch edge of pre-tenoned stock
1/2” grid lines accurate visual line up of panels
Sliding panel blow out block (for rails, there is a guide w/thumbscrews as well)
Pressure Bar Height Adjustment Knobs
19”
Air Inlet
- 175 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 175
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Weaver’s Rail and Panel Patterns give flexibility to produce multiple styles and shapes of Cabinet Doors, Finished Cabinet Ends, Island and Appliance Fronts. Our patterns allow you to offer the high style “Custom Look” in kitchen cabinetry. Patterns are interchangeable for making doors 91/2” to 22” wide.
Put the best to work in your shop... with Weavers!
WEAVER EXIGLASS RAIL & PANEL PATTERN SETSPL
Plexiglass (Air Jigs) For use with the same width of Jig
Oval French - The Oval French patterns offer a arch like the oval - 2” rise. They are used with a 41/4” top rail and have a 2” rise.
Modern French - The Modern French patterns are popular in entertainment centers with side-by-side doors. They are used with 43/4” top rail and have a 21/2” rise.
Country French - The Country French patterns offer a French - The French patterns are popular in entertainment centers with side-by-side doors. They are used with a 43/4” top rail and have a 21/2” rise.
Neoclassic - The neoclassic patterns offer a special blend of a soft oval with flat side shoulders. They are used with a 31/4” top rail and have a 1” rise with this pattern.
Classical - The Classical patterns offer an extra flourish to the crown raise. They are used with a 41/4” top rail and have a 2” rise.
Oval 2” Rise - The oval patterns are the second most requested style. The point to point arc produces varying widths at the ends of the rail. They are used with 41/4” top rail and have a 2” rise.Note: The oval produces a higher percentage of chip out on the outfeedpoint.
Oval 1” Rise - The oval patterns are the second most requested style. The point to point arc produces varying widths at the ends of the rail. They are used with 31/4” top rail and have a 1” rise.Note: The oval produces a higher percentage of chip out on the outfeed point.
most popular style requested. They are used with 41/4” top rail and have a 2” rise.
Crown 2” Rise - The traditional crown patterns offer the Crown 1-1/2” Rise - the most popular style requested. They are used with a 11/2” rise with 33/4” top rail.
PA1418 12 Rail 12 Panel Patterns 19” $339
Item No. Description Width Price
PA1409 12 Rail 12 Panel Patterns 19” $339
Item No. Description Width Price
PA1412 10 Rail 10 Panel Patterns 19” $339Item No. Description Width Price
PA1411 12 Rail 12 Panel Patterns 19” $339
Item No. Description Width PricePA1414 12 Rail 12 Panel Patterns 19” $339 Item No. Description Width Price
PA1416 12 Rail 12 Panel Patterns 2” 19” $339
Item No. Description Width PricePA1415 12 Rail 12 Panel Patterns 1” 19” $339Item No. Description Width Price
Item No. Description Width PricePA1410-12 12 Rail 12 Panel Patterns 2” 19” $339
Item No. Description Width Price
PA1417 10 Rail 10 Panel Patterns 11/2” 19” $339
PA1413 10 Rail 10 Panel Patterns 19” $339 Item No. Description Width Price
19”
19”
19”
19”
19”
19”
19”
19”
19”
19”
flat center with a radius on the edge.They are used with a 41/4” top rail and have a 2” rise
For 19” Shapermaster
176 - May 2018
- 176 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Put the best to work in your shop...with Weavers!
GLIDESON AN
AIR CUSHION
SHAPERMASTERPNEUMATIC CROWN DOOR FIXTURE SYSTEM
32” Shapermaster
INCREASE CONTROL - FLEXIBILITY - EASY TO OPERATE - SELF CENTERING - GOOD VARIETY OF PATTERN SETS -HELPFUL ON IRREGULAR SHAPES
Shapermaster encompasses several productivity improving features. The built-in centering device centers arched rail and panel parts with a turn of a wheel on the top of the jig. No more centering measurements. Parts are held firmly by two air cylinders which exert force on a neoprene rubber covered pressure bar. Shapermaster’s versatility enables you to make custom door designs by the fabrication of templates of your own design out of plexiglass or ¼” hardboard. The adjustable brakes on each edge of the fixture stop the ball bearing from spinning and burning the template.
VERSATILITY / PRODUCTIVITY / EFFICIENCY
Air Inlet
Notched plastic patterns automatically centered to pin, see your work yet be protected. We have 10 different styles to choose from
On/Off Valve
Air flow control valve
Formed hand grips
Long lasting brake pad material to stop ball bearing rub collars Easy to reach material centering
knob Turns rack and pinion gear centering device
Pin to center patterns fast and accurate.
Specially designedcenter tabs to help square panel and catch edge of pre-tenoned stock
Sliding panel blow out block (for rails, there is a guide w/thumbscrews as well)
Pressure Bar Height Adjustment Knobs
SHAPERMASTER™ AIR JIGS
Air Jig - 32” Wide, 12” front to back #AJ3212 - $2,695!
Item No. Description PriceAJ3212 32” opening, $2,695 12” front to back
For Larger Doors, etc.
come with tenon back up bar, index bar for stiles and rails, blow out bar for panels, 2 brake stops for ball bearing rub collars, allen wrenches and instruction manual.
ShApermASterS™
- 177 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 177
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Weaver’s Rail and Panel Patterns give flexibility to produce multiple styles and shapes of Cabinet Doors, Finished Cabinet Ends, Island and Appliance Fronts. Our patterns allow you to offer the high style “Custom Look” in kitchen cabinetry. Patterns are interchangeable for making doors 91/2” to 28” wide.
Put the best to work in your shop...with Weavers!
WEAVER
Plexiglass (Air Jigs) For use with the same width of Jig
Classical - The Classical patterns offer an extra flourish to the crown raise. They are used with a 41/4” top rail and have a 2” rise.
Crown 1-1/2” Rise - the most popular style requested. They are used with a 11/2” rise with 33/4” top rail.
32”
PA3413 12 Rail 12 Panel Patterns 32” $489Item No. Description Width Price
PA3412 12 Rail 12 Panel Patterns 32” $489Item No. Description Width Price
PA3414 18 Rail 18 Panel Patterns 32” $599Item No. Description Width Price
Item No. Description Width Price
PA3417 12 Rail 12 Panel Patterns 11/2” 32” $489
Neoclassic - The neoclassic patterns offer a special blend of a soft oval with flat side shoulders. They are used with a 31/4” top rail and have a 1” rise with this pattern.
Oval 2” Rise - The oval patterns are the second most requested style. The point to point arc produces varying widths at the ends of the rail. They are used with 41/4” top rail and have a 2” rise.Note: The oval produces a higher percentage of chip out on the outfeedpoint.
most popular style requested. They are used with 41/4” top rail and have a 2” rise.
Crown 2” Rise - The traditional crown patterns offer the
PA3418 18 Rail 18 Panel Patterns 32” $599 Item No. Description Width Price
PA3409 18 Rail 18 Panel Patterns 32” $599 Item No. Description Width Price
PA3411 18 Rail 18 Panel Patterns 32” $599Item No. Description Width Price
PA3416 18 Rail 18 Panel Patterns 2” 32” $599
Item No. Description Width Price
Item No. Description Width Price
PA3410-18 18 Rail 18 Panel Patterns 2” 32” $599
EXIGLASS RAIL & PANEL PATTERN SETSPL
32”
32”
32”
32”
French - The French patterns are popular in entertainment centers with side-by-side doors. They are used with a 43/4” top rail and have a 21/2” rise. 32”
Country French - The Country French patterns offer a flat center with a radius on the edge. They are used with a 41/4” top rail and have a 2” rise.
32”
Modern French - The Modern French patterns are popular in entertainment centers with side-by-side doors. They are used with 43/4” top rail and have a 21/2” rise.
32”
Oval French - The Oval French patterns offer a arch like the oval - 2” rise. They are used with a 41/4” top rail and have a 2” rise.
32”
Oval House Door 32”
Item No. Description Width Price PA3246 Rail & Panel 32” $899
Crown House Door 32”
Item No. Description Width Price PA3245 Rail & Panel 32” $899
MANUFACTURED IN U.S.A.
For 32” Shapermaster
Oval 1” Rise - The oval patterns are the second most requested style. The point to point arc produces varying widths at the ends of the rail. They are used with 31/4” top rail and have a 1” rise.Note: The oval produces a higher percentage of chip out on the outfeed point.
Item No. Description Width PricePA3415 18 Rail 18 Panel Patterns 1” 32” $599
32”
178 - May 2018
- 178 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
“Gives Your Company The Edge It Needs”
Sand door edges, bevel shelf fronts, sand wine racks - sand inside corners, sand table tops - the Weaver Edge Sander will give your company the edge you have been looking for.
allows you to perform many time consuming tasks very efficiently.
The Edge Sander . . .
EDGE SANDERManufactured In U.S.A. WEAVER
Comes completely assembled and set up.
Edge Sander Belts(6” width x 120 “ length)
ESX-SP180 180 Grit ESX-SP120 120 Grit ESX-SP100 100 Grit ESX-SP080 80 Grit ESX-SP060 60 Grit ESX-SP036 36 Grit
$18$18$20$20$22$22
Item No. Description Price
ES1753 5 H.P., 3 Ph. $8,495 ES1751 5 H.P., 1 Ph. $8,995
The Weaver Edge Sander is a real work horse, designed to last, even in the roughest metal or woodworking shops. We have used this sander in our metal shop for over 40 years.
Drive wheel and table wheel are set back of platen, so any length of material can be sanded.
The steel platen is 6” wide x 47” long - torsioned straight and flat, the table is solid laminated hardwood, 71” long -
uses 6” x 120” sanding belts.
4” Dust Chute
MANUFACTURED IN U.S.A.
Magnetic Starter Switch
The 72” long table is curved around on end of the sander allowing curve and radius work to be easily performed
Quick Action Release Makes Changing the belts fast - Belt aligning is quickly made by adjusting the knob located on top of the machine.
The table adjusts easily with a simple turn of the crank, allowing the use of the entire width of the sanding belt
Welded steel frame - rigid construction
Baldor Motor
- 179 -
Fax 1-913-831-2974
www.weaver-company.com
May 2018 - 179
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 CALL TOLL FREE 1-800-255-6214Copyright © 2018 all Rights Reserved Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
Comes assembled and ready to work for you. 11 HSS brad point drill bits and pre-wired with a 10-ft. cord included
MANUFACTURED IN U.S.A.
4 Adjustable table depth stops for your standard widths of cabinets
Rolling table for parallel drilling
Two spring loaded index pins for quick line boring
Steel Gears
Magnetic Starter Switch
Simple to operate! THE MULTIPLE DRILL FOR ADJUSTABLE SHELVING
Drill bits - bradpoint - 1/4” shank - 21/2” overall - spaced on 2” centers turning at 1200 rpm (using the 2nd index pin, 1” spacing achieved).
Quick and easy to adjust length gauges allows you to position flip stops as needed for right to left material movement.
Adjustable depth gauge is set for drilling uniform depth, regardless of the thickness of the material.
Operates like a drill press so starting the drills or the speed of drilling is easily controlled for the type of material being drilled.
Table glides on ball bearing rollers for quick adjustment in width, rolling table also insures parallel drilling. You don’t have to turn thematerial end-to-end!
The fastest way to drill for adjustable shelves in kitchen cabinets, uppers and lowers, bookcases and etc.covering a wide range of lengths, or thickness of material.
Drill two rows of eleven holes in your finished ends, wall ends or parti-tions 2” wide to 26” wide and any length of material in 10 seconds.
MULTIPLE SPINDLE DRILL WEAVER
Baldor Motor
2” Centers - 11 Spindles
Manufactured In U.S.A.
42” Table Shown
“... This is to express our satisfaction with your Multiple Spindle Drill .... The machine does everything as advertised, is a joy to operate, and probably paid for itself in about the first two weeks.” C. A. Forsberg Co.
Custom Built Cabinets
Ball bearings and steel beveled gears make an easy running, accurate, productive and economical machine, designed to last.
THE MULTIPLE DRILL IS EASY TO OPERATE !Multiple Spindle Drill Machine Bits
Item No. Type Dia Shank Length Material Price DMXDB0250R Brad Point 1/4” 1/4” 2-1/2” HSS $12DMXDB05mmR Brad Point 5mm 1/4” 2-1/2” HSS $26DMXDB0250L Brad Point 1/4” 1/4” 2-1/2” HSS $12DMXDB05mmL Brad Point 5mm 1/4” 2-1/2” HSS $26DMXDB-025-10MM-TCT-R Brad Point 1/4” 10mm 57mm Carbide $12DMXDB-5MM-10MM-TCT-R Brad Point 5mm 10mm 57mm Carbide $12DMXDB-025-10MM-TCT-L Brad Point 1/4” 10mm 57mm Carbide $14DMXDB-5MM-10MM-TCT-L Brad Point 5mm 10mm 57mm Carbide $14
1HP (3Ph or 1PH 220v, or 110v 1PH). Bits turning at 1200 rpm.
DM11-2-11-72-1/4-H 1HP, 1 PH, 72” Table DM11-2-13-72-1/4-H 1HP, 3 PH, 72” Table DM11-2-11-72-5mm-H 1HP, 1 PH, 72” Table DM11-2-13-72-5mm-H 1HP, 3 PH, 72” Table
$11,995$11,895$11,995$11,895
Item No. Description Price
180 - May 2018
- 180 -
CALL TOLL FREE 1-800-255-6214Weaver Company - 1108 South 37th Street - KanSaS City, KS 66106 uSa
MANUFACTURED IN U.S.A.
Phone 1-913-831-1800 www.weaver-company.com
Fax 1-913-831-2974Copyright © 2018 all Rights Reserved
Aluminum Flat Drive Pulleys
Item No. Arbor (Motor) Price
SHXPU1 11/8” Spindle SHXPU2 7/8” Spindle
$249$249
Power Rated V-Belts
Shaper Parts
Motors Ball Bearings
Heavy Guage Steel
and Cast Iron Frames
SINGLE PHASE: Item No. MO213450-145T
MO313450-182T MO513450
THREE PHASE: Item No. MO333450-145T MO333450-182T MO533450 MO733450
NEMAHP Phase Cycles Volts RPMs Frame Price2 Single 60 220 3,450 145T $857
3 Single 60 220 3,450 182T $9825 Single 60 220 3,450 184T $1,378
NEMAHP Phase Cycles Volts RPMs Frame Price3 Three 60 220/440 3,450 145T $8713 Three 60 220/440 3,450 182T $8825 Three 60 220/440 3,450 184T $978
71/2 Three 60 220/440 3,450 184T $1,290
Item No. Description PriceSHXBE24 Most Current Shapers $19SHXBE26 For Std. Top 145T Frame $19SHXBE35 For Old Large Top 182T $19SHXBE37 For Old Style Large Top $19 145T Frame
Magnetic SwitchesSINGLE PHASE: Item No. HP Phase Volts PriceSW31220 3 Single 220 $230SW51220 5 Single 220 $270
THREE PHASE: Item No. HP Phase Volts PriceSW33220 3 Three 220 $210SW33440 3 Three 440 $210SW53220 5 Three 220 $230SW53440 5 Three 440 $230SW73220 71/2 Three 220 $260SW73440 71/2 Three 440 $260
Recommended RPMs up to 7,000
SHAPER MANDRELSItem No. Description Price
SP3000 3/4” Spindle SP4000 1” Spindle
$ 1,769$ 1,849
SP6000 11/4” Spindle $ 1,889
Shaper Mandrels
Continuous Duty
WEAVER WEAVER
Aluminum Flat Drive Pulleys
Power Rated V-Belts
WEAVER
A
ll these saw
blad
es are Carb
ide Tip
ped
, 10” O.D
., 5/8” Bo
re and .125” K
erfSP
EC
IAL
!
Up to 50%
Off
SU
PE
R S
AV
ING
S O
N G
RE
AT S
AW
BLA
DE
S! S
tehle has
been manufacturing industrial w
oodworking tooling for over
75 years. Their quality is known around the w
orld.
As you realize, not all saw
blades are alike. With S
tehle
quality you w
ill receive Germ
an hard precision steel saw
blade plates and micro-grade carbide tips, all m
anufactured under rigid standards of quality.
Because of im
proved technology, including automation,
we are able to offer you som
e of the finest quality carbide tipped saw
blades at a very afford
able p
rice. After using
Stehle S
aw B
lades you will agree w
ith us that they are some
of the BE
ST B
LAD
ES
AT A
NY
PR
ICE
.
Weaver Com
pany - 1108 South 37th Street - Kansas City, KS 66106 C
AL
L TOL
L FR
EE
1-800-255-6214U
SA
Sto
cked
for fast d
elive
ryM
AD
E IN
AU
ST
RIA
/w
eaver-c
om
pan
y.co
m
Phone 1-913-831-1800 - Fax 1-913-831-2974
weaver-c
om
pan
y.co
m
CARBIDES
AW BLADES
TIPPED
10 ” Carbide T
ipped
Sawblades
5/8 ” Arbor
SALE
PRICE
$24.5
0$24.5
0$24.5
0
SALE
PRICE
$24.5
0$24.5
0$24.5
0
SALE
PRICE
$24.5
0$24.5
0$24.5
0
SALE
PRICE
$29.5
0$29.5
0$29.5
0
SALE
PRICE
$19.5
0$19.5
0$19.5
0
SOLD OUT!
SOLD OUT!
SOLD OUT!
SOLD OUT !
Ball Bearing Rub Collars & Warning Discs- Page 136-137
. . . Shaper Systems, Shaper Essentials, Cutters, Accessories, Saw Blades, Power Feeders . . .
Weaver Company - 1108 South 37th Street - Kansas City, Kansas 66106-2028 www.weaver-company.com
SHAPING MACHINERY & TOOLING FOR YOUR SHOP!Affordable Industry Leading Quality & Production
W EAVER D
OO
R S
YSTE
MS
- SH
APER
ES
SEN
TIALS
- CU
TTER
S - JIG
S - FE
NC
ES
MAY
2 0 1 8
DR
ILL MAC
HIN
ES
- ED
GE S
AN
DER
- PO
WER
FEED
ER
S
WE
AVE
RWeaver Manufacturing & Sales Co., Inc. - 1108 South 37th Street - Kansas City, Kansas 66106-2028
World Renowned Affordable
Quality
made
CALL TOLL FREE 1-800-255-6214 Weaver Company
(Copyright c 2018 Weaver Company - All Rights Reserved)1108 South 37th Street - Kansas City, 66106
Variable Speed for running different types of material and depth of cut
Item No. Description PricePF721W Weaver Double Bond $2,995
Belt Power Feeder
VARIABLE SPEED BELT POWER FEEDERHinged for quick removal - Easily lifted out of the way to use jig, shaper or change cutters
Continuous Duty
MADE IN THE U.S.A.
Works Anywhere 110 Volts
300-lb. Torque Motor
Angle of belts are easily adjusted - feed stock into fence or away from fence.
Page 164
PLEXIGLASS RAIL & PANEL PATTERN SETS
Pattern Set Shown:
#PA2417 $379
For use with Shapermaster™ Air Crown Rail & Panel Jigs
MADE IN the U.S.A.
19”, 24”, & 32” Openings. Work with Stock up to
21/4” Thick
Built In Rack & PinionCentering Device
24” AJ2402 Shown - $1,995
Air Jigs rides on an a thin cushion of air!ACCURATE - EFFORTLESS
Pneumatic Clamps & Air Ride
Air Crown Door J igs
SHAPERMASTER™ Pages 172-176
PNEUMATIC CROWN DOOR FIXTURE SYSTEM
GLIDES ONAIR CUSHION
AIR TENON FIXTURES
Openings 117/8” and 18” Wide, Work with Stock up to 21/4” Thick
Air Tenon Fixture#AJ1201RW $1,195
RIDES IN STANDARD 3/8” x 3/4” GROOVE IN SHAPER TOP
MADE IN the U.S.A.
Page 5
Page 173-177
Catalog May 2018
Sticking Shaper
Air TenonJig
Tenon Shaper
Crown Glass and Square Glass
cabinet doors with grille and true
divided light mullions.
Crown Rail Patterns
Crown Rail Jig
GLASS MULLION CABINET DOOR SHAPER SYSTEM$19,795 - Page 18.
Power Feeder
CROWN PANEL & RAIL JIGS & PATTERNS
CROWN PANEL JIGS This jig features a built-in rack & pinion gear centering device for crown panels.
CROWN RAIL JIGS This jig features a built-in rack & pinion gear centering device for top Rail.
MADE IN the U.S.A.
10 Styles Available!
- May 2018 182
Page 168-170JM330 Crown Rail Jig $523
JM310 Crown Rail Jig $569