a8 series led tape tpe zufi flex mini - aluz.lighting

Specification Submittal

4 / 1 / 2022 / Rev 4

A8 Series | LED TapeZUFI Flex Mini

TYPE

of 4

(A8-ZUFI-FLM)

1170 N Red Gum St, Anaheim, CA 92806

© ALUZ All Rights Reserved. ALUZ reserves the right to make changes or withdraw specifi cations without prior notice.

[email protected] 866.ALUZ.LTG | 714.535.7900

GENERAL FEATURESApplications Accent, Decorative Lighting

Lens 100% Frosted

Viewing Angle 120°

Length Built to Order

Construction Flexible Lightstrip

Assembly Increment 3-1/4”

Mounting Mounting Clips (Sold Separately)

ListingDry, Wet, or IP67 LocationUL2108, 67.1.9, 60.4, CSA C22.2 #9UL8750, CSA250

Driver Remote (Sold Separately)

Closet Rating Up to 4 Watts per Foot Maximum

Temperature Ratings

Operating / Startup: -20° to 48°C (-4° to 120°F)Storage: -40° to 76°C (-40° to 170°F)

Installation Link

END VIEW / DIMENSIONS.40”

.40”

BEAM ANGLE

120° x 120° Beam

120°


4 / 1 / 2022 / Rev 4


TYPE

of 4

(A8-ZUFI-FLM)




LAMP SPECIFICATIONSLampNumber

Correlated Color Temperature Description L70 LED Life

27K 2700 Kelvin Warm White

60,000 hrs.30K 3000 Kelvin Warm White

35K 3500 Kelvin Neutral White

50K 5000 Kelvin Cool White

R Red 621nm

40,000 hrs.G Green 525nm

B Blue 470nm

A Amber 590nm

ELECTRICALDimming 0-10V, Forward / Reverse Phase, Lutron, DMX, DALI

Maximum Run 65’ (0.9W, 1.3W, 3W)

Luminaire Voltage 24VDC

LAMP FEATURESLamp Type LEDs

CRI > 90

Effi cacy(Based on 35K CCT LED) 41 Lumens per Watt

*1 Lumens per Foot based on 35K CCT LED. Example: 41 Lumens x 0.9 Watts = 36 Lumens per Foot.*2 (LTEA) 40 watt max Lutron Hi-Lume 1% 2 Wire #LTEA4U1UKL-CV240*3 (L3DA) 40 watt max Lutron Hi-Lume 1% 3 Wire #L3DA4U1UKL-CV240*4 (L3D0) 96 watt max Hi-Lume Premier 0.1% #L3D0-96W24V-U*5 Default DMX address of each luminaire is 001. Consult third party DMX commissioner to modify at time of installation.*6 DALI commissioning to be performed by a third party at time of installation. ALUZ does not provide DALI commissioning.*7 Run lengths are required for Wet & IP67 Location products. Provide run lengths at time of order.*8 Luminaire length must be specified using the Assembly Increment. Specified lengths that deviate from the assembly increment will be sized to the nearest smaller increment.

SPECIFY PRODUCT CODE | CHOOSE FROM DROP DOWNSSeries Watts per Foot Dimming CCT LED Listing Luminaire Length*8

A8-ZUFI-FLM

ZUFI Flex Mini100% Frosted Lens:Line of Light(A8-ZUFI-FLM)

0.9 Watts (0.9W)36 Lumens per Foot

Phase Dimming:Forward / Reverse Phase (PH)

2700K (27K) Indoor(DRY)

Specify Length using 3-1/4” Assembly Increment3000K (30K)

1.3 Watts (1.3W)53 Lumens per Foot

0-10V: 100% - 1% (10V) 3500K (35K) Outdoor*7

(WET)Hi-lume 1% 2 Wire*2 (LTEA) 5000K (50K)

3 Watts (3W)123 Lumens per Foot

Hi-lume 1% 3 Wire*3 (L3DA) Red (R) Outdoor IP67*7

(IP67)Hi-lume Premier 0.1% JA8*4 (L3D0) Green (G)

JA8 0-10V (JA8-10V) Blue (B)

JA8 Hi-lume 1% 2 Wire (JA8-LTEA) Amber (A)

DMX-512*5 (DMX)

DALI*6 (DALI)

Leave Blank for Non-Dimming

DRIVERSDimming Selection Product Code(s) Link to Specification Sheet / URL

Forward / Reverse Phase (PH)

0-10V: 100% - 1% (JA8) (10V), (JA8-10V)

Hi-lume 1% 2 Wire (JA8)Hi-lume 1% 3 WireHi-lume Premier 0.1% (JA8)

(LTEA), (JA8-LTEA)(L3DA)(L3D0)

DMX, DALI (DMX), (DALI)


4 / 1 / 2022 / Rev 4


TYPE

of 4

(A8-ZUFI-FLM)




Part # Qty. Qty.

A8-SC-2P-WET

CONNECTORS (Sold Separately)

MOUNTING OPTIONS (Sold Separately)

Part # Qty.

A8-ZUFI-FLM-MC

Note: Use 1 mounting clip per 2’, rounded up.Click on image to see cut sheet for additional details.

Part # Qty.

A8-ZUFI-FLM-UC-8’

Note: Available in 8’ field cuttable segments.Click on image to see cut sheet for additional details.


4 / 1 / 2022 / Rev 4


TYPE

of 4

(A8-ZUFI-FLM)




Detail A

Individual Run

Detail B / C

Run with Continuous Connector

Detail APower Connector

Detail BDry Splice Connection(Connectors by Others)

Detail CWet Splice Connection

DESIGN GUIDELINES

a8 series led tape tpe zufi flex mini - aluz.lighting

Documents