address 地址 chung, new territories, hong kong. 香港新界葵涌 … · - manhole cover...

Contact Details

Registration No. HKIAS 005

Page 1 of 1

Contact details last updated on: 16 January 2020

005

A.E.S. Destructive and Non-Destructive Testing Limited

安捷材料試驗有限公司 ADDRESS

地址 :

Flat F, 2/F, Block 2, Kwai Tak Industrial Centre, 15-33 Kwai Tak Street, Kwai

Chung, New Territories, Hong Kong.

香港新界葵涌葵德街 15-33葵德工業中心第二座二字樓 F

ENQUIRY 查詢

: Mr Terrence KWOK Cheuk-lun, Quality Manager 郭卓麟先生，品質管理經理

TELEPHONE 電話

: 2422 6898

FAX 傳真

: 2419 1137

E-MAIL

電郵 : [email protected]

WEBSITE ADDRESS

網址 : http://www.aes.hk

CLIENTELE 服務對象

: Public 公眾

mailto:[email protected]://www.aes.hk/

Scope of Accreditation


Page 1 of 2

Issue Date: 16 January 2020

Ref: HKIAS005-28

005


安捷材料試驗有限公司

ADDRESS

地址 : Flat F, 2/F, Block 2, Kwai Tak Industrial Centre, 15-33 Kwai Tak

Street, Kwai Chung, New Territories, Hong Kong.

香港新界葵涌葵德街 15-33葵德工業中心第二座二字樓 F

TYPE OF INSPECTION BODY

檢驗機構類別 : A : Provides ‘third party’ inspection service to the public

向公眾提供「第三方」檢驗服務

ACCREDITED INSPECTION

FIELD

認可檢驗領域

: Construction Products建築產品



Page 2 of 2


Ref: HKIAS005-28

005


安捷材料試驗有限公司

Flat F, 2/F, Block 2, Kwai Tak Industrial Centre, 15-33 Kwai Tak Street, Kwai Chung, New Territories, Hong Kong.

香港新界葵涌葵德街 15-33葵德工業中心第二座二字樓 F Construction Products建築產品

ITEM INSPECTED

檢驗項目 SPECIFIC PROPERTY OR

CHARACTERISTIC INSPECTED

特定檢驗特性或特徵

SPECIFIC INSPECTION METHOD

OR STANDARD

特定檢驗方法或標準

Welding inspection Inspection of welding procedures BS EN ISO 15609-1: 2004

(MMAW, TIG, MIG, MAG, FCAW, SAW) ISO 15609-1: 2004

in conjunction with one of the following inspection

methods:

BS 4870: Part 1: 1981 + Amd. 4322: 1983

+ Amd. 4730: 1984 + Amd. 5161: 1986

+ Amd. 6293: 1990

BS EN 288-3: 1992 + Amd. 9763: 1997

+ Amd. 10026 Corr. No. 1: 1998

BS EN 288-8: 1995

BS EN ISO 15613: 2004

BS EN ISO 15614-1: 2004 + Al: 2008 + A2: 2012

BS EN ISO 15614-1: 2017

ISO 15613: 2004

ISO 15614-1: 2004 + Al: 2008 + A2: 2012

ISO 15614-1: 2017

Inspection of welders testing BS 4871: Part 1: 1982 + Amd. 4732: 1984

(MMAW, TIG, MIG, MAG, FCAW, SAW) + Amd. 5697: 1987

BS 4872: Part 1: 1982 + Amd. 4640: 1984

BS EN 287-1: 1992 + Amd. 9665: 1997

+ Amd. 9804: 1998 + Amd. 10009 Corr. No.1: 1998

BS EN 287-1: 2004

+ Amd. 15598 Corr. No.1: 2005

+ Amd. 16295: 2006 + Amd. 16831 Corr. No.2: 2007

BS EN 287-1: 2011

BS EN ISO 9606-1: 2017

BS EN ISO 9606-1: 2013

BS EN ISO 9606-4: 1999

ISO 9606-1: 1994 + Amd. 1: 1998

ISO 9606-1: 2012

ISO 9606-1: 2012 + Corr. No.1: 2012

+ Corr. No.2: 2013

ISO 9606-4: 1999

Inspection of metal arc welding of steel for BS 7123: 1989 excluding Cl.10.9

concrete reinforcement (MMAW)

Inspection of arc stud welding procedure BS EN ISO 14555: 2017

Inspection of qualification test for BS EN ISO 14732: 2013

mechanised and automatic welding

Contact Details


Page 1 of 1

Contact Details last updated on: 21 January 2020

006

FT Laboratories Limited

科達測檢試驗所有限公司 ADDRESS

地址 :

Lot No. DD77 Section 1552 S.A. ss 1RP, Ng Chow South Road, Ping Che,

New Territories, Hong Kong

香港新界坪輋五洲南路丈量約份第 77 約地段 1552 号 A 分段第一小分段 Postal Address: P. O. Box 830, Fanling Post Office, New Territories, Hong Kong

郵寄地址:香港新界粉嶺郵政局信箱 830 號

ENQUIRY 查詢

: Mr YUE Wai-chun, Technical Director 余惠俊先生，技術總監

TELEPHONE 電話

: 2758 4861

FAX 傳真

: 2758 8962

E-MAIL


WEBSITE ADDRESS

網址 : http://www.ft.com.hk


: Public 公眾

mailto:[email protected]://www.ft.com.hk/

Scope of Accreditation Registration No. HKIAS 006 Page 1 of 2 Issue Date: 21 December 2018 Ref: HKIAS006-24

006

FT Laboratories Limited 科達測檢試驗所有限公司 ADDRESS 地址

: Lot No. DD77 Section 1552 S.A. ss 1RP, Ng Chow South Road, Ping Che, New Territories, Hong Kong

香港新界坪輋五洲南路丈量約份第 77 約地段 1552 號 A 分段第一小分段

TYPE OF INSPECTION BODY 檢驗機構類別

: A : Provides ‘third party’ inspection service to the public 向公眾提供「第三方」檢驗服務

ACCREDITED INSPECTION FIELD 認可檢驗領域

: Construction Products 建築產品


006

FT Laboratories Limited 科達測檢試驗所有限公司

Lot No. DD77 Section 1552 S.A. ss 1RP, Ng Chow South Road, Ping Che, New Territories, Hong Kong. 香港新界坪輋五洲南路丈量約份第 77 約地段 1552 號 A 分段第一小分段

Construction Products 建築產品 ITEM INSPECTED

檢驗項目

SPECIFIC PROPERTY OR CHARACTERISTIC INSPECTED


SPECIFIC INSPECTION METHOD OR STANDARD


Welding inspection Inspection of welding procedures BS 4870: Part 1: 1981 + Amd. 4322, Amd. 4730, (MMAW, TIG, MAG, MIG, FCAW) Amd. 5161 & Amd. 6293 BS EN 288-3: 1992 + Amd. 9736 & Amd. 10026 Corr. No. 1 BS EN ISO 15613: 2004 BS EN ISO 15614-1: 2004 + A1: 2008 & A2: 2012 Inspection of welder testing BS 4871: Part 1: 1982 + Amd. 4732 & Amd. 5697 (MMAW, TIG, MAG, MIG, FCAW) BS 4872: Part 1: 1982 + Amd. 4640 BS EN 287-1: 1992 + Amd. 9665, Amd. 9804 & Amd. 10009 Corr. No.1 BS EN 287-1: 2004 + Amd. 15598, Amd. 16295 & Amd. 16831 Corr. No.2 BS EN 287-1: 2011 BS EN ISO 9606-1: 2013 Inspection of metal arc welding of steel for

concrete reinforcement (MMAW) BS 7123 : 1989 + Amd. 7128 (excluding Cl. 10.9)

Contact Details Registration No. HKIAS 007 Page 1 of 1

007

Castco Testing Centre Ltd. 佳力高試驗中心有限公司 ADDRESS 地址

:

6/F., Techno Centre, 33 On Kui Street, On Lok Tsuen, Fanling, New Territories, Hong Kong 香港新界粉嶺安樂村安居街 33 號得利中心 6 樓

ENQUIRY 查詢

: Mr Norman LEE Shu-leung, Technical Director 李樹樑先生，技術總裁

TELEPHONE 電話

: 2597 8333

FAX 傳真

: 2597 8399

E-MAIL 電郵

: [email protected]

WEBSITE ADDRESS 網址

: www.castco.com.hk


: Public 公眾

Contact Details last updated on 22 March 2017

mailto:[email protected]://www.castco.com.hk/



Page 1 of 7

Issue Date: 10 February 2020

Ref: HKIAS007-51

007

Castco Testing Centre Ltd.

佳力高試驗中心有限公司

ADDRESS

地址 : 6/F., Techno Centre, 33 On Kui Street, On Lok Tsuen, Fanling,


香港新界粉嶺安樂村安居街 33 號得利中心 6 樓





FIELD

認可檢驗領域

: Construction Products建築產品 Indoor Air Quality Inspection室內空氣質素檢驗



Page 2 of 7


Ref: HKIAS007-51

007



6/F., Techno Centre, 33 On Kui Street, On Lok Tsuen, Fanling, New Territories, Hong Kong

香港新界粉嶺安樂村安居街 33 號得利中心 6 樓 Construction Products建築產品

ITEM INSPECTED





OR STANDARD


Paint Inspection of painting procedures for Architectural Services Department General

structural steel works Specification (2007) Cl. 15.61-15.65, 21.42-21.46,

21.53-21.57



Page 3 of 7


Ref: HKIAS007-51

007





ITEM INSPECTED





OR STANDARD


Waterworks Products

- Cast iron pipes & fittings Inspection of testing, lining, dimensional BS 143 & BS 1256: 2000

checks, material properties, coating, BS EN 877: 1999

marking and handling JIS B2301: 2004

- Water Supplies Department Particular Specification

App. 23.10

Water Supplies Department Particular Specification

App. 23.12

- Ductile iron pipes & fitting Inspection of testing, lining, dimensional BS 4772: 1988

checks, material properties, coating BS EN 545: 1995

marking and handling BS EN 545: 2002

BS EN 598: 1995


App. 23.03

- Fire hydrants Inspection of testing, dimensional check BS5041: Part 1: 1987

(Pedestal and swan neck) material properties, coating, marking Water Supplies Department Particular Specification

and handling App. 23.06

- Manhole cover Inspection of testing, dimensional check, BS EN 124: 1994 (excluding Cl. 5 and 10)

(with coating) material properties, coating, marking Water Supplies Department Particular Specification


- PE pipes & fittings Inspection of testing, dimensional check ISO 4427: 1996

material properties, coating, marking ISO 14236: 2000

and handling JIS K6762: 2004

Water Industry Specification 4-24-01 (Jul 1998)

Water Industry Specification 4-32-14 (Mar 1995)

Water Industry Specification 4-32-15 (Mar 1995)

Water Industry Specification 4-52-01 (Dec 1992)


App. 23.09

- Steel pipes/tubes and fitting Inspection of testing, lining, dimensional BS 1387: 1985

checks, material properties, coating, BS 534: 1990



App. 23.12

- Water Supplies Department Particular Specification

App. 23.02

- Surface box Inspection of testing, dimensional check, BS 5834: Part 2: 1983 (exclude Cl. 4)

material properties, coating, marking, Water Supplies Department Particular Specification




Page 4 of 7


Ref: HKIAS007-51

007





ITEM INSPECTED





OR STANDARD


Waterworks Products

(cont’d)

- Valves & fittings Inspection of testing, dimensional check, BS 5150: 1990

material properties, coating, marking BS 5163: 1986

and handling BS 6755: Part 1: 1986

BS 5153: 1974

BS 5155: 1984

BS 5154: 1991

BS 5156: 1985

BS 5146: Part 2: 1984

EN 1074: Part 1 and EN 1074: Part 2: 2000


App. 23.04


App. 23.05


App. 23.11

Welding inspection Inspection of welding procedures BS EN ISO 15609: Part 1: 2004 or

(MMAW, TIG, MIG, MAG, FCAW, SAW) ISO 15609: Part 1: 2004 in conjunction with

one of the following inspection methods:

BS 4870: Part 1: 1981 + Amd. 6293

BS EN 288: Part 3: 1992 + Amd. 9736

EN ISO 15613: 2004

EN ISO 15614: Part 1: 2004 + A1: 2008 + A2: 2012

Inspection of welder testing BS 4871: Part 1: 1982 + Amd. 5697

(MMAW, TIG, MIG, MAG, FCAW, SAW) BS 4872: Part 1: 1982 + Amd. 4640

BS EN 287: Part 1: 1992 + Amd. 9665

BS EN 287: Part 1: 2004

BS EN 287: Part 1: 2011

ISO 9606: Part 1: 1998

Inspection of fusing welding of BS 4570: 1985

steel castings (MMAW)

Inspection of metal arc welding BS 7123: 1989 + Amd. 7128

reinforcement steel (MMAW)



Page 5 of 7


Ref: HKIAS007-51

007




香港新界粉嶺安樂村安居街 33 號得利中心 6 樓 Indoor Air Quality Inspection 室內空氣質素檢驗

ITEM INSPECTED





OR STANDARD


Indoor Air Quality A Guide on Indoor Air Quality Certification Scheme

for Offices and Public Places, The Government of the

HKSAR, Indoor Air Quality Management Group,

September 2003

On-site measurement of :

- Temperature Annex 3 (a), as documented in INS-IAQ-SOP01-TEMP

(Temperature sensor; thermistor)

- Relative Humidity Annex 3 (a), as documented in INS-IAQ-SOP02-RH

(Relative humidity sensor; thin-film capacitive sensor)

- Air Movement Annex 3 (a), as documented in INS-IAQ-SOP03-AM

(Hot wire velocity probe)

- Carbon Dioxide Annex 3 (b), as documented in INS-IAQ-SOP04-CO2

(Non-dispersive infrared NDIR)

- Carbon Monoxide Annex 3 (b), as documented in INS-IAQ-SOP05-CO

(Electrochemical sensor)

- Respirable Suspended Particulate Annex 3 (g), as documented in INS-IAQ-SOP06-RSP

(Light scattering laser diode)

- Ozone Annex 3 (f), as documented in INS-IAQ-SOP07-O3

(Gas sensitive semiconductor sensor)

- Total Volatile Organic Compounds Annex 3 (h), as documented in INS-IAQ-SOP08-TVOC

(Photo-ionization sensor)

- Radon Annex 3 (c), as documented in INS-IAQ-SOP09-RN

(Electrostatic collection of alpha-emitters with spectral

analysis)

- Nitrogen Dioxide Annex 3 (e), as documented in INS-IAQ-SOP10-NO2(R)

(Gas Sensitive Electrochemical sensor)

- Formaldehyde Annex 3 (d), as documented in INS-IAQ-SOP11-

HCHO(R) (Photoelectric photometry detector)



Page 6 of 7


Ref: HKIAS007-51

007





ITEM INSPECTED





OR STANDARD



(cont’d) for Offices and Public Places, The Government of the


September 2003

On-site sampling of :

- Nitrogen Dioxide Annex 3 (e), as documented in INS-IAQ-SOP10-NO2

(Passive sampler)

- Formaldehyde Annex 3 (d), as documented in INS-IAQ-SOP11-HCHO

(Passive sampler)

- Airborne Bacteria Annex 3 (i), as documented in INS-IAQ-SOP12-ABC

(Single stage impactor)

Walkthrough Inspection Clause 11

IAQ Compliance Assessment Clause 13 to Clause 28



Page 7 of 7


Ref: HKIAS007-51

007


佳力高試驗中心有限公司 6/F., Techno Centre, 33 On Kui Street, On Lok Tsuen, Fanling, New Territories, Hong Kong


ITEM INSPECTED





OR STANDARD





January 2019


- Carbon Dioxide Annex 4 (a), as documented in INS-IAQ-SOP04-CO2


- Carbon Monoxide Annex 4 (a), as documented in INS-IAQ-SOP05-CO


- Respirable Suspended Particulate Annex 4 (f), as documented in INS-IAQ-SOP06-RSP


- Ozone Annex 4 (e), as documented in INS-IAQ-SOP07-O3

(Gas sensitive semiconductor sensor)

- Total Volatile Organic Compounds Annex 4 (g), as documented in INS-IAQ-SOP08-TVOC


- Radon Annex 4 (b), as documented in INS-IAQ-SOP09-RN


analysis)

- Nitrogen Dioxide Annex 4 (d), as documented in INS-IAQ-SOP10-NO2(R)

(Gas Sensitive Electrochemical sensor)

- Formaldehyde Annex 4 (c), as documented in INS-IAQ-SOP11-HCHO(R)

(Photoelectric photometry detector)


- Nitrogen Dioxide Annex 4 (d), as documented in INS-IAQ-SOP10-NO2

(Passive sampler)

- Formaldehyde Annex 4 (c), as documented in INS-IAQ-SOP11-HCHO

(Passive sampler)

- Airborne Bacteria Annex 4 (h), as documented in INS-IAQ-SOP12-ABC


Walkthrough Inspection Clauses 13 to 14

Mould Inspection Clause 20

IAQ Compliance Assessment Clauses 16 to 19 and Clause 21 to 40


008

Fugro Technical Services Limited 輝固技術服務有限公司 ADDRESS 地址

:

5 Lok Yi Street, Tai Lam, Tuen Mun, New Territories, N T, Hong Kong 香港新界屯門大欖樂怡街五號輝固發展中心

ENQUIRY 查詢

: Mr Joseph POON Tim-leung, Managing Director 潘添良先生，董事總經理

TELEPHONE 電話

: 2450 8233

FAX 傳真

: 2450 6138

E-MAIL 電郵

: [email protected]


: www.fugro.com


: Public 公眾

Contact details last updated on: 13 June 2018

mailto:[email protected]://www.fugro.com/

Scope of Accreditation Registration No. HKIAS 008 Page 1 of 7 Issue Date: 12 September 2019 Ref: HKIAS008-45

008

0 BFugro Technical Services Limited 輝固技術服務有限公司

1 BADDRESS 地址

: Fugro Development Centre, 5 Lok Yi Street, Tai Lam, Tuen Mun, New Territories, Hong Kong 香港新界屯門大欖樂怡街五號輝固發展中心

2 BTYPE OF INSPECTION BODY 檢驗機構類別


3 BACCREDITED INSPECTION FIELD 認可檢驗領域

: Construction Products 建築產品 Indoor Air Quality Inspection 室內空氣質素檢驗


008

Fugro Technical Services Limited 輝固技術服務有限公司

Fugro Development Centre, 5 Lok Yi Street, Tai Lam, Tuen Mun, New Territories, Hong Kong 香港新界屯門大欖樂怡街五號輝固發展中心

4 BConstruction Products 建築產品 5 BITEM INSPECTED

6 B檢驗項目 7 BSPECIFIC PROPERTY OR

CHARACTERISTIC INSPECTED 8 B特定檢驗特性或特徵

9 BSPECIFIC INSPECTION METHOD 1 0 BOR STANDARD

1 1 B特定檢驗方法或標準

Waterworks Products Inspection of testing, dimensional check, ISO 4427: 1996 .vs. material properties, coating, marking and ISO 14236: 2000 .vs. handling of polyethylene pipes and fittings JIS K6762: 2004 .vs. Water Industry Specification WIS 4-24-01 (Jul 1998) .vs. Issue 2 Water Industry Specification WIS 4-32-14 (Mar 1995) .vs. Issue 1 Water Industry Specification WIS 4-32-15 (Mar 1995) .vs. Issue 1 Water Industry Specification WIS 4-52-01 (Dec 1992) .vs. Issue 1 Water Supplies Department Particular Specification .vs. App. 23.09 Inspection of testing, dimensional check, BS 5150: 1990 material properties, coating, marking and BS 5163: 1986 handling of valves and fittings BS 6755: Part 1: 1986 BS 5153: 1974 BS 5155: 1984 BS 5154: 1991 BS 5156: 1985 BS 5146: Part 2: 1984 EN 1074-1: 2000 EN 1074-2: 2000 Water Supplies Department Particular Specification App. 23.04 Water Supplies Department Particular Specification App. 23.05 Water Supplies Department Particular Specification App. 23.11


008



1 2 BConstruction Products 建築產品 1 3 BITEM INSPECTED

1 4 B檢驗項目 1 5 BSPECIFIC PROPERTY OR

CHARACTERISTIC INSPECTED 1 6 B特定檢驗特性或特徵

1 7 BSPECIFIC INSPECTION METHOD 1 8 BOR STANDARD


Welding Inspection Inspection of welding procedures BS EN ISO 15609-1: 2004 in conjunction with (MMAW, TIG, MIG, MAG, FCAW, SAW) one of the following inspection methods BS 4870: Part 1: 1981 + Amd. 6293 BS EN 288: Part 3: 1992 + Amd. 9736 + Amd. 10026 Corr. No. 1 BS EN 288-8: 1995 BS EN ISO 15613: 2004 BS EN ISO 15614-1: 2004 + A1: 2008 & A2: 2012 BS EN ISO 15614-1: 2017 Inspection of welders testing BS 4871: Part 1: 1982 + Amd. 5697 (MMAW, TIG, MIG, MAG, FCAW, SAW) BS 4872: Part 1: 1982 + Amd. 4640 BS EN 287-1: 1992 + Amd. 9665 + Amd. 10009 Corr. No. 1 BS EN 287-1: 2004 BS EN 287-1: 2011 BS EN ISO 9606-1: 2013 BS EN ISO 9606-1: 2017 Inspection of metal arc welding of BS 7123: 1989 steel for concrete reinforcement Inspection of metal arc welding of BS EN ISO 17660-1: 2006 reinforcing steel for load-bearing welded joints


008



2 0 BIndoor Air Quality Inspection 室內空氣質素檢驗 2 1 BITEM INSPECTED





Indoor Air Quality Inspection A Guide on Indoor Air Quality Certification Scheme for Offices and Public Places, The Government of the HKSAR, Indoor Air Quality Management Group, September 2003 On-site measurement of : - Temperature Annex 3 (a), as documented in E-I-002 (Temperature sensor; thermistor) - Relative Humidity Annex 3 (a), as documented in E-I-002 (Humidity sensor capacitive measurement principle) - Air Movement Annex 3 (a), as documented in E-I-002 (Hot wire velocity probe) - Carbon Dioxide Annex 3 (b), as documented in E-I-002 (Non-dispersive infrared NDIR) - Carbon Monoxide Annex 3 (b), as documented in E-I-002 (Electrochemical sensor) - Formaldehyde Annex 3 (d), as documented in E-I-011 (photoelectric photometry method) - Nitrogen Dioxide Annex 3 (e), as documented in E-I-012 (gas sensitive electrochemical sensor)

- Respirable Suspended Particulate Annex 3 (g), as documented in E-I-001 (Light scattering laser diode) - Total Volatile Organic Compounds Annex 3 (h), as documented in E-I-003 (Photo-ionization sensor) - Radon Annex 3 (c), as documented in E-I-005 (Electrostatic collection of alpha-emitters with spectral analysis) - Ozone Annex 3 (f), as documented in E-I-004 and E-I-010 (Electrochemical sensor and Gas sensitive semiconductor sensor)


008








Indoor Air Quality Inspection A Guide on Indoor Air Quality Certification Scheme for Offices and Public Places, The Government of the HKSAR, Indoor Air Quality Management Group, September 2003 On-site sampling of : - Airborne Bacteria Annex 3 (i), as documented in E-I-006 and E-I-013 (centrifugal sampler and single-stage impactor) - Formaldehyde Annex 3 (d), as documented in E-I-007 (Passive sampler) - Nitrogen Dioxide Annex 3 (e), as documented in E-I-008 (Passive sampler) Walkthrough Inspection Clause 11 IAQ Compliance Assessment Clause 13 to Clause 28


008


Fugro Development Centre, 5 Lok Yi Street, Tai Lam, Tuen Mun, New Territories, N T, Hong Kong 香港新界屯門大欖樂怡街五號輝固發展中心






Indoor Air Quality Inspection (cont’d) A Guide on Indoor Air Quality Certification Scheme for Offices and Public Places, The Government of the HKSAR, Indoor Air Quality Management Group, January 2019 On-site measurement of : - Carbon Dioxide Annex 4 (a), as documented in E-I-002 (Non-dispersive infrared NDIR) - Carbon Monoxide Annex 4 (a), as documented in E-I-002 (Electrochemical sensor)

- Respirable Suspended Particulate Annex 4 (f), as documented in E-I-001 (Light scattering laser diode) - Total Volatile Organic Compounds Annex 4 (g), as documented in E-I-003 (Photo-ionization sensor) - Radon Annex 4 (b), as documented in E-I-005 (Electrostatic collection of alpha-emitters with spectral analysis) - Ozone Annex 4 (e), as documented in E-I-004 and E-I-010 (Electrochemical sensor and gas sensitive semiconductor) - Formaldehyde Annex 4 (c), as documented in E-I-011 (photoelectric photometry method) - Nitrogen Dioxide Annex 4 (d), as documented in E-I-012 (gas sensitive electrochemical sensor) On-site sampling of : - Airborne Bacteria Annex 4 (h), as documented in E-I-006 and E-I-013 (centrifugal sampler and single-stage impactor) - Formaldehyde Annex 4 (c), as documented in E-I-007 (passive sampler) - Nitrogen Dioxide Annex 4 (d), as documented in E-I-008 (passive sampler) Walkthrough Inspection Clauses 13 to 14 Mould Inspection Clause 20 IAQ Compliance Assessment Clauses 16 to 19 and Clause 21 to 40


008

Summary of Voluntary Suspension .vs. denotes inspection activity for which the accreditation has been voluntarily suspended with effect from 14 April 2019 (Notification Letter no. HKIAS008-43).


009

Asia Pacific Inspection Limited 法亞太質量控制有限公司 ADDRESS 地址

:

Room 506-508, 5/F, Laford Center, 838 Lai Chi Kok Road, Cheung Sha Wan, Kowloon, Hong Kong 香港九龍長沙灣荔枝角道 838 號勵豐中心 5 樓 506-508 室

Room 301, No. 29, Wenhua Building, No. 703, Dongfengdong Road, Yuexiu District, Guangzhou, China 中國廣州市越秀區東風東路 703 號大院 29 號文化大樓 301 房

ENQUIRY 查詢

: Mr Aurelien DALLE, Chief Operation Officer (營運總監)

TELEPHONE 電話

: 3719 8617

FAX 傳真

: 2377 0028

E-MAIL 電郵

: [email protected]


: www.api-hk.com


: Public 公眾

Last updated on 18 July 2017

Scope of Accreditation Registration No. HKIAS 009 Page 1 of 3 Issue Date: 31 August 2017 Ref: HKIAS009-30

009

Asia Pacific Inspection Limited 法亞太質量控制有限公司 ADDRESS 地址

: Room 506-508, 5/F, Laford Center, 838 Lai Chi Kok Road, Cheung Sha Wan, Kowloon, Hong Kong 香港九龍長沙灣荔枝角道 838 號勵豐中心 5 樓 506-508 室


: A : Provides “third party” inspection service to the public 向公眾提供「第三方」檢驗服務


: Consumer Products 消費產品


009

Asia Pacific Inspection Limited 法亞太質量控制有限公司 Room 506-508, 5/F, Laford Center, 838 Lai Chi Kok Road, Cheung Sha Wan, Kowloon, Hong Kong 香港九龍長沙灣荔枝角道 838 號勵豐中心 5 樓 506-508 室

Consumer Products 消費產品 ITEM INSPECTED


CHARACTERISTIC INSPECTED 特定檢驗特性或特徵



Electrical and Electronic Products Pre-shipment inspection In-house inspection methods: - Electrical appliances - dry iron 03.003 - oven 03.016 - toaster, 03.022 - deep fat fryer 03.031 - electric wok 03.033 - blender 03.034 - food processor 03.035 - juicer 03.037 - coffee maker 03.044 - kettle 03.045 - hair dryer 03.058 - fan 03.090 - Luminaire 06.001, 06.003 Hardgoods Pre-shipment inspection In-house inspection methods: - Furniture - table 09.001 - seating 09.002 - Kitchenware In-house inspection methods1: - can opener 13.014 - cork screw 13.015 - funnel, strainer & filter 13.016 - knife, slicer, cutter, peeler & scissor 13.013 - measuring cup, scale & weight 13.009 - mug, cup, glass, bowl & cooking ware 13.010 & container - nut and shellfish cracker 13.018 - salad spinner 13.012 - paper roll & bags 13.011 - vacuum flask 13.017 - hand rotary beater 13.006 - thermometer 13.005 - cork stopper 13.004 - pizza cutter 13.007 - egg cutter 13.020 Note 1: The electrical safety tests included in the product sheets are not covered in the accreditation.


009

Asia Pacific Inspection Limited 法亞太質量控制有限公司 Room 506-508, 5/F, Laford Center, 838 Lai Chi Kok Road, Cheung Sha Wan, Kowloon, Hong Kong 香港九龍長沙灣荔枝角道 838 號勵豐中心 5 樓 506-508 室

Consumer Products 消費產品 ITEM INSPECTED





Pre-shipment inspection In-house inspection methods: Hardgoods (cont’d) - Toys and Children’s Products In-house inspection method: - Toys intended for use by children 18.002 above 3 years of age

Contact Details


Page 1 of 1

Contact details last updated on 4 November 2016

010

ETS-Testconsult Limited

東業德勤測試顧問有限公司 ADDRESS

地址 :

8/F., Block B, Veristrong Industrial Centre, 34-36 Au Pui Wan Street, Fo Tan,


香港新界火炭坳背灣街 34-36 號豐盛工業中心 B 座 8 樓

ENQUIRY 查詢

: Mr Tony WONG Yiu-keung 黃耀強先生

TELEPHONE 電話

: 2695 8318

FAX 傳真

: 2695 3944

E-MAIL


WEBSITE ADDRESS

網址 : http://www.ets-testconsult.com


: Public 公眾

mailto:[email protected]://www.ets-testconsult.com/



Page 1 of 4


Ref: HKIAS010-32

010


東業德勤測試顧問有限公司

ADDRESS

地址 : 8/F., Block B, Veristrong Industrial Centre, 34-36 Au Pui Wan

Street, Fo Tan, New Territories, Hong Kong

香港新界火炭坳背灣街 34-36 號豐盛工業中心 B 座 8 樓





FIELD

認可檢驗領域

: Construction Products建築產品



Page 2 of 4


Ref: HKIAS010-32

010


東業德勤測試顧問有限公司 8/F., Block B, Veristrong Industrial Centre, 34-36 Au Pui Wan Street, Fo Tan, New Territories, Hong Kong

香港新界火炭坳背灣街 34-36 號豐盛工業中心 B 座 8 樓 Construction Products建築產品

ITEM INSPECTED





OR STANDARD


Waterworks Products

Cast iron pipes & fittings Inspection of testing, lining, dimensional WSD(PS): App. 23.10

checks, material properties, coating, WSD(PS): App. 23.12

marking and handling BS 143 & BS 1256: 2000

JIS B2301: 2004

BS EN 877: 1999

Copper alloy longscrew Inspection of testing, dimensional check WSD(PS): App. 22.06

material properties, coating, marking and BS 1387: 1985

handling

Ductile iron pipes & fitting Inspection of testing, lining, dimensional WSD(PS): App. 23.03

checks, material properties, coating BS 4772: 1988


BS EN 545: 2002

BS EN 545: 2006

BS EN 545: 2010

BS EN 598: 1995

BS EN 598: 2007 (A1 : 2009)

Fire hydrants Inspection of testing, dimensional check WSD(PS): App. 23.06

(Pedestal and swan neck) material properties, coating, marking and BS5041-1: 1987

handling

Manhole cover Inspection of testing, dimensional check, WSD(PS): App. 23.14

(with coating) material properties, coating, marking BS EN 124: 1994 (excluding Cl. 5 and 10)

and handling

PE pipes & fittings Inspection of testing, dimensional check WSD(PS): App. 23.09

material properties, coating, marking ISO 4427: 1996

and handling ISO 14236: 2000

JIS K6762: 2004

WIS 4-24-01

WIS 4-32-14

WIS 4-32-15

WIS 4-52-01

BS EN 12201-2: 2003 & BS EN 12201-3: 2003

BS EN 12201-2: 2011 + A1: 2013

BS EN 12201-3: 2011 + A1: 2012



Page 3 of 4


Ref: HKIAS010-32

010




ITEM INSPECTED





OR STANDARD


Waterworks Products

(cont’d)

Stainless steel pipes and fittings Inspection of testing, dimensional check BS 6362: 1990

material properties, coating, marking and BS EN 10312: 2002

handling ISO 4144: 2003

ISO 7598: 1988

WSD(PS): App. 22.11

Steel pipes/tubes and fittings Inspection of testing, lining, dimensional BS 534: 1990

checks, material properties, coating marking BS 1387: 1985

and handling BS EN 10241: 2000

BS EN 10224: 2002

WSD(PS): App. 22.02

WSD(PS): App. 23.02

WSD(PS): App. 23.12

Surface box Inspection of testing, dimensional check, WSD(PS) App. 23.13

material properties, coating, marking, BS 5834: Part 2: 1983 (excluding Cl. 4)

and handling

Valves & fittings Inspection of testing, dimensional check, BS 5146-2: 1984

material properties, coating, marking BS 5150: 1990

and handling BS 5153: 1974

BS 5154: 1991

BS 5155: 1984

BS 5156: 1985

BS 5163: 1986

BS 5163-1: 2004

BS 6755-1: 1986

BS EN 593: 2004

BS EN 593: 2009 (A1 : 2011)

BS EN 1074-2: 2000

BS EN 12334: 2001

WSD(PS): App. 22.10

WSD(PS): App. 23.04

WSD(PS): App. 23.05

WSD(PS): App. 23.11



Page 4 of 4


Ref: HKIAS010-32

010

ETS-Testconsult Limited.



ITEM INSPECTED





OR STANDARD


Welding Inspection Inspection of welding procedures BS EN ISO 15609-1: 2004 in conjunction with

(MMAW, SAW, TIG, MIG, MAG, FCAW) one of the following inspection methods:

BS 4870: Part 1: 1981 (AMD4322, AMD4730,

AMD5161, AMD6293)

BS EN 288: Part 3: 1992 (AMD9736,

AMD10026 Corr. No. 1)

BS EN ISO 15613: 2004

BS EN ISO 15614-1: 2004 (A1 : 2008)

BS EN ISO 15614-1: 2004 (A2 : 2012)

BS EN ISO 15614-1: 2017

Inspection of welder testing BS EN ISO 9606-1: 2013 (Incorporating

(MMAW, SAW, TIG, MIG, MAG, FCAW) Corrigenda September 2012 and February 2016)

BS EN ISO 9606-4: 1999

BS 4871: Part 1: 1982 (AMD4732, AMD5697)

BS 4872: Part 1: 1982 (AMD4640)

BS EN 287: Part 1: 1992 (AMD9665, AMD9804

AMD10009 Corr. No.1)

BS EN 287: Part 1: 2004

(AMD15598 Corr.No.1, AMD16295,

AMD16831 Corr. No.2)

BS EN 287: Part 1: 2011

ISO 9606-1: 1994 (A1 : 1998)

ISO 9606-1: 2017

Inspection of metal arc welding BS 7123: 1989 (AMD7128)

of steel for concrete reinforcement

Inspection of welding of reinforcing steel BS EN ISO 17660-1: 2006

for load-bearing welded joints


012

PROVA Inspection & Testing Co. (HK) Limited 華鋼檢測(香港)有限公司 ADDRESS 地址

:

Lot No. 4114, In D.D. 104, Yuen Long, New Territories, Hong Kong 香港新界元朗 104 地段 4114 號

Postal address: P.O. Box 1234, Yuen Long Delivery Office

郵寄地址: 元朗派遞局郵政信箱 1234 號

ENQUIRY 查詢

: Mr Alan LEUNG Ka-lun, General Manager 梁嘉倫先生，總經理

TELEPHONE 電話

: (852) 2420 2336 / (86)755 2983 5277

FAX 傳真

: (852) 2420 2312 / (86)755 2983 5536

E-MAIL 電郵

: [email protected]


: http://www.prova-hk.com


: Public 公眾

Contact details last updated on 28 January 2019

mailto:[email protected]://www.prova-hk.com/


012

PROVA Inspection & Testing Co. (HK) Limited 華鋼檢測(香港)有限公司 ADDRESS 地址

: Lot No. 4114, In D.D. 104, Yuen Long, New Territories, Hong Kong

香港新界元朗 104 地段 4114 號






012

PROVA Inspection & Testing Co. (HK) Limited 華鋼檢測(香港)有限公司 Lot No. 4114, In D.D. 104, Yuen Long, New Territories, Hong Kong 香港新界元朗 104 地段 4114 號

Construction Products 建築產品

ITEM INSPECTED 檢驗項目





Waterworks products Inspection of testing, dimensional check, BS EN 12201-2: 2003 material properties, coating and marking BS EN 12201-2: 2011 + A1: 2013 and handling of PE pipes & fittings BS EN 12201-3: 2003 BS EN 12201-3: 2012 BS EN 13244-1: 2002 BS EN 13244-2: 2002 BS EN 13244-3: 2002 BS EN 13244-4: 2002 BS EN 13244-5: 2002 ISO 4427-2: 2007 ISO 4427-3: 2007 ISO 14236: 2000 Welding inspection Inspection of welding procedures BS EN ISO 15609-1: 2004 in conjunction with (MMAW, SAW, TIG, MIG, MAG, FCAW) one of the following inspection methods: BS 4870: Part 1: 1981 + Amd. 6293 BS EN 288-3: 1992 + Amd. 9736 & Amd. 10026 Corr. No. 1 BS EN ISO 15613: 2004 BS EN ISO 15614-1: 2004 + A1: 2008 & A2: 2012 BS EN ISO 15614-1: 2017 Inspection of welder testing BS 4871: Part 1: 1982 + Amd. 4732 & Amd. 5697 (MMAW, SAW, TIG, MIG, MAG, FCAW) BS 4872: Part 1: 1982 + Amd. 4640 BS EN 287-1: 1992 + Amd. 9665, Amd. 9804 & Amd. 10009 Corr. No.1 BS EN 287-1: 2004 + Amd. 15598, Amd. 16295 & Amd. 16831 Corr. No.2 BS EN 287-1: 2011 BS EN ISO 9606-1: 2013 BS EN ISO 9606-1: 2017 BS EN ISO 9606-4: 1999 ISO 9606-1: 1994 + Amd. 1 Inspection of metal arc welding of steel for BS 7123: 1989 + Amd. 7128 (excluding Cl. 10.9) concrete reinforcement (MMAW) Inspection of arc stud welding procedures BS EN ISO 14555: 2017 Inspection of qualification tests for mechanised BS EN ISO 14732: 2013 and automatic welding

Registration No. HKIAS 013 Page 1 of 3 Issue Date: 13 March 2017 Ref: HKIAS013-28

013

Bureau Veritas Hong Kong Limited 立德國際公証香港有限公司 ADDRESS 地址

Main office : 7/F, Octa Tower, 8 Lam Chak Street, Kowloon Bay, Kowloon, Hong Kong 香港九龍灣臨澤街 8 號傲騰廣場 7 樓

Operating office : Shenzhen Office 5/F & 6/F, Building D2, Dong Nan Industry Building, Dong Jia Tou, Hou Hai Avenue, She Kou, Nan Shan District, Shenzhen, China 中國深圳南山區蛇口后海大道東角頭東南工貿大厦 D2 棟 5 樓及 6 樓 Shanghai Office 2/F, No. 368 Guang Zhong Road, Zhuan Qiao Town, Min Hang District, Shanghai, China 中國上海閔行區顓橋鎮光中路 368 號 2 樓

AUTHORISED REPRESENTATIVE 委任代表

: Mr Wangtshuk BHOTIA, Senior Quality Assurance Manager

ENQUIRY 查詢

: Mr Wangtshuk BHOTIA, Senior Quality Assurance Manager

Tel 電話 : (852) 2429 1194 E-mail 電郵 : [email protected] Website Address 網址 : www. bureauveritas.com/cps


: A: Provides “third party” inspection service to the public


: Consumer Products 消費產品

SCOPE OF ACCREDITATION 認可範圍

: Accredited activities are shown on the following pages 認可項目詳見後頁

* * * * * * * *


013

Bureau Veritas Hong Kong Limited 立德國際公証香港有限公司

INSPECTION FIELD

檢驗領域

ITEM, MATERIAL OR PRODUCT INSPECTED

檢驗項目、物料或產品





CONSUMER PRODUCTS Electrical and Electronic Pre-production inspection, In-house inspection methods:1 消費產品 Products During production inspection, BVC-E-0001, BVC-E-0045, BVC-E-0046 - Accessory, Pre-shipment inspection BVC-E-0047, BVC-E-0048, BVC-E-0049, - Appliance with air for the listed products. BVC-E-0050, BVC-E-0051, BVC-E-0052, compressor, BVC-E-0053, BVC-E-0054, BVC-E-0055, - Audio & Video product, BVC-E-0056 and BVC-E-0057 - Electrical appliance, - Electric tool, - Electronic product, - IT & Telecom product, - Luminaire Softgoods In-house inspection methods:1 - Accessory, Fabric, Footwear, BVC-S-0003A, BVC-S-0003B, - Garment, BVC-S004, BVC-S-0008, - Home textile product BVC-S-0012, BVC-S-0013 and BVC-S-0014 Hardgoods In-house inspection methods:1 - Bag & box & luggage, BVC-H-0002, BVC-H-0005, BVC-H-0006, - Decoration & handicraft, BVC-H-0016, BVC-H-0017, BVC-H-0018, - Furniture, BVC-H-0019, BVC-H-0020, BVC-H-0021, - Household product, BVC-H-0022, BVC-H-0023, BVC-H-0024, - Inflated product, BVC-H-0025, BVC-H-0026, BVC-H-0027, - Kitchenware & toilet item, BVC-H-0028, BVC-H-0029, BVC-H-0030, - Non-electric tool, BVC-H-0031, BVC-H-0032, BVC-H-0033, - Personal product, BVC-H-0034, BVC-H-0035, BVC-H-0036, Sporting & Camping BVC-H-0037, BVC-H-0038, BVC-H-0039, product, Stationery, Toy BVC-H-0040, BVC-H-0041, BVC-H-0042, BVC-H-0043 and BVC-H-0044 Note 1: The in-house methods may be adapted to suit the requirements of clients. However, any new inspection techniques included in the adapted procedures are not covered in the accreditation. Consumer Product Supervision of loading In-house inspection methods:1 GP007_I


013

Bureau Veritas Hong Kong Limited 立德國際公証香港有限公司

INSPECTION FIELD

檢驗範圍

ITEMS, MATERIAL OR PRODUCT INSPECTED

檢驗項目、物料或產品





CONSUMER PRODUCTS Factory inspection (cont’d) 消費產品 - Ethical assessment Inspecting the factory ethical system In-house inspection methods:1 (續上) through: Ethical Assessment: Field Instructions on-site checking on the implementation (Rev. 00 – 16 June 2006) of specified areas relating to in conjunction with monitoring and documentation, Ethical Assessment – Assessment Worksheet minimum work age, voluntary (Rev. 00 – 16 June 2006) and employment, working conditions Ethical Assessment – Inspection Report (production area), living conditions (Rev. 00 – 16 June 2006) (dormitories), freedom of association, non-discrimination, disciplinary practices, harassment or abuse, compensation & benefits, hours of work - Factory assessment Inspecting the factory quality system In-house inspection methods:1 through: General Factory Assessment: Field Instructions verification of information provided by (Rev. 05 – 13 November 2006) vendor/factory through sampling, in conjunction with on-site checking on the implementation General Factory Assessment / Inspection Report of specified quality elements relating to (Rev. 09 – 13 November 2006) facilities & working environment, quality control inspection, in-process quality control, final inspection, packaging inspection, non-conforming materials, communication, documentation control, work movement and handling of complaints Note 1: The in-house methods may be adapted to suit the requirements of clients. However, any new inspection techniques included in the adapted procedures are not covered in the accreditation.

Contact Details


Page 1 of 1

Contact details last updated on 2 March 2016

014

Business Environment Council Limited – IAQ Solutions Centre

商界環保協會有限公司 – 室內空氣技術服務中心 ADDRESS

地址 :

Room 201, 2 Floor, Jockey Club Environmental Building, 77, Tat Chee Avenue,

Kowloon, Hong Kong

香港九龍達之路 77 號賽馬會環保樓 2樓 201室

ENQUIRY 查詢

: Mr LEUNG Chi-fung, Head 梁志峰先生，總監

TELEPHONE 電話

: 2784 3945

FAX 傳真

: 2784 6699

E-MAIL


WEBSITE ADDRESS

網址 : http://www.bec.org.hk


: Public 公眾

mailto:[email protected]://www.bec.org.hk/

Scope of Accreditation Registration No. HKIAS 014 Page 1 of 4 Issue Date: 23 May 2019 Ref: HKIAS014-29

014

0 BBusiness Environment Council Limited – IAQ Solutions Centre 商界環保協會有限公司 – 室內空氣技術服務中心

1 BADDRESS 地址

: Room 201, 2 Floor, Jockey Club Environmental Building, 77, Tat Chee Avenue, Kowloon, Hong Kong 香港九龍達之路 77 號賽馬會環保樓 2 樓 201 室

2 BTYPE OF INSPECTION BODY 檢驗機構類別


3 BACCREDITED INSPECTION FIELD 認可檢驗領域

: Indoor Air Quality Inspection 室內空氣質素檢驗


014

Business Environment Council Limited – IAQ Solutions Centre 商界環保協會有限公司 – 室內空氣技術服務中心 Room 201, 2 Floor, Jockey Club Environmental Building, 77, Tat Chee Avenue, Kowloon, Hong Kong 香港九龍達之路 77 號賽馬會環保樓 2 樓 201 室

4 BIndoor Air Quality Inspection 室內空氣質素檢驗 5 BITEM INSPECTED

6 B檢驗項目 7 BSPECIFIC PROPERTY OR

CHARACTERISTIC INSPECTED 8 B特定檢驗特性或特徵

9 BSPECIFIC INSPECTION METHOD 1 0 BOR STANDARD


Indoor Air Quality A Guide on Indoor Air Quality Certification Scheme for Offices and Public Places, The Government of the HKSAR, Indoor Air Quality Management Group, September 2003 On-site measurement of : - Temperature Annex 3 (a), as documented in CIB-WI-01 (Thermistor) - Relative Humidity Annex 3 (a), as documented in CIB-WI-02 (Thin-film capacitive) - Air Movement Annex 3 (a), as documented in CIB-WI-03 (Hot wire velocity probe) - Carbon Dioxide Annex 3 (b), as documented in CIB-WI-04 (Non-dispersive infrared NDIR) - Carbon Monoxide Annex 3 (b), as documented in CIB-WI-05 (Electrochemical sensor) - Formaldehyde Annex 3 (d), as documented in CIB-WI-11 (Photoelectric photometry detector) - Nitrogen Dioxide Annex 3 (e), as documented in CIB-WI-12 (Electrochemical sensor) - Ozone Annex 3 (f), as documented in CIB-WI-09 (Heated metal oxide semiconductor and gas sensitive semiconductor) - Radon Annex 3 (c), as documented in CIB-WI-08 (Diffused junction photodiode) - Respirable Suspended Particulate Annex 3 (g), as documented in CIB-WI-06 (Light scattering laser diode) - Total Volatile Organic Compounds Annex 3 (h), as documented in CIB-WI-07 (Photo-ionization sensor)


014







Indoor Air Quality A Guide on Indoor Air Quality Certification Scheme for Offices and Public Places, The Government of the HKSAR, Indoor Air Quality Management Group, September 2003 On-site sampling of : - Airborne Bacteria Annex 3 (i), as documented in CIB-WI-10 (Centrifugal sampler) - Formaldehyde Annex 3 (d), as documented in CIB-WI-11 (Passive sampler) - Nitrogen Dioxide Annex 3 (e), as documented in CIB-WI-12 (Passive sampler) Walkthrough Inspection Clause 11 IAQ Compliance Assessment Clause 13 to Clause 28


014







Indoor Air Quality A Guide on Indoor Air Quality Certification Scheme for Offices and Public Places, The Government of the HKSAR, Indoor Air Quality Management Group, January 2019 On-site measurement of : - Carbon Dioxide Annex 4 (a), as documented in CIB-WI-04 (Non-dispersive infrared NDIR) - Carbon Monoxide Annex 4 (a), as documented in CIB-WI-05 (Electrochemical sensor) - Formaldehyde Annex 4 (c), as documented in CIB-WI-11 (Photoelectric photometry detector) - Nitrogen Dioxide Annex 4 (d), as documented in CIB-WI-12 (Electrochemical sensor) - Ozone Annex 4 (e), as documented in CIB-WI-09 (Heated metal oxide semiconductor and Gas sensitive semiconductor) - Radon Annex 4 (b), as documented in CIB-WI-08 (Diffused junction photodiode) - Respirable Suspended Particulate Annex 4 (f), as documented in CIB-WI-06 (Light scattering laser diode) - Total Volatile Organic Compounds Annex 4 (g), as documented in CIB-WI-07 (Photo-ionization sensor) On-site sampling of : - Airborne Bacteria Annex 4 (h), as documented in CIB-WI-10 (Centrifugal sampler) - Formaldehyde Annex 4 (c), as documented in CIB-WI-11 (Passive sampler) - Nitrogen Dioxide Annex 4 (d), as documented in CIB-WI-12 (Passive sampler) Walkthrough Inspection Clause 13 to 14 Mould Inspection Clause 20 IAQ Compliance Assessment Clauses 16 to 19 and Clause 21 to 40

Contact Details


Page 1 of 1

Contact details last updated on 27 January 2017

015

CMA Industrial Development Foundation Limited

香港中華廠商聯合會工業發展基金有限公司 ADDRESS

地址 :

Rm. 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung Street, Fo Tan, Shatin, New

Territories, Hong Kong

香港新界沙田火炭黃竹洋街 9-13號仁興中心 1302 室

ENQUIRY 查詢

: Mr Dominic LAM Chun-hong, General Manager of Operations 林俊康先生，營運總監

TELEPHONE 電話

: 2698 8198

FAX 傳真

: 2695 4177

E-MAIL


WEBSITE ADDRESS

網址 : http://www.cmatcl.com/


: Public 公眾

mailto:[email protected]://www.cmatcl.com/

Scope of Accreditation Registration No. HKIAS 015 Page 1 of 4 Issue date: 29 May 2019 Ref: HKIAS015-23

015

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 ADDRESS 地址

: Rm. 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung Street, Fo Tan, Shatin, New Territories, Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室






015

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm. 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung Street, Fo Tan, Shatin, New Territories, Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室

Indoor Air Quality Inspection 室內空氣質素檢驗 ITEM INSPECTED





Indoor Air Quality A Guide on Indoor Air Quality Certification Scheme for Offices and Public Places, The Government of the HKSAR, Indoor Air Quality Management Group, September 2003 On-site measurement of : - Temperature Annex 3 (a), as documented in SOP-ENV-IAQ-6 (Temperature sensor; thermistor) - Relative Humidity Annex 3 (a), as documented in SOP-ENV-IAQ-7 (Humidity sensor capacitive measurement principle) - Air Movement Annex 3 (a), as documented in SOP-ENV-IAQ-2 (Hot wire velocity probe) - Carbon Dioxide Annex 3 (b), as documented in SOP-ENV-IAQ-4 (Non-dispersive infrared NDIR) - Carbon Monoxide Annex 3 (b), as documented in SOP-ENV-IAQ-5 (Electrochemical sensor) - Formaldehyde Annex 3 (d), as documented in SOP-ENV-IAQ-15 (Photoelectric photometry detector) (Gas sensitive electrochemical sensor) - Ozone Annex 3 (f), as documented in SOP-ENV-IAQ-1 (Heated metal oxide semiconductor and gas sensitive semiconductor) - Radon Annex 3 (c), as documented in SOP-ENV-IAQ-9 (Electrostatic collection of alpha-emitters with spectral analysis) - Respirable Suspended Particulate Annex 3 (g), as documented in SOP-ENV-IAQ-3 (Light scattering laser diode) - Total Volatile Organic Compound Annex 3 (h), as documented in SOP-ENV-IAQ-8 (Photo-ionization sensor) On-site sampling of : - Airborne Bacteria Annex 3 (i), as documented in SOP-ENV-IAQ-12 (Single and Two-stage Impactor) - Formaldehyde Annex 3 (d), as documented in SOP-ENV-IAQ-11 (Passive sampler) - Nitrogen Dioxide Annex 3 (e), as documented in SOP-ENV-IAQ-10 (Passive sampler)


015

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司 Rm. 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung Street, Fo Tan, Shatin, New Territories, Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室






Indoor Air Quality A Guide on Indoor Air Quality Certification Scheme for Offices and Public Places, The Government of the HKSAR, Indoor Air Quality Management Group, September 2003 Walkthrough Inspection Clause 11 IAQ Compliance Assessment Clause 13 to Clause 28


015

CMA Industrial Development Foundation Limited 香港中華廠商聯合會工業發展基金有限公司

Rm. 1302, Yan Hing Centre, 9-13 Wong Chuk Yeung Street, Fo Tan, Shatin, New Territories, Hong Kong 香港新界沙田火炭黃竹洋街 9-13 號仁興中心 1302 室






Indoor Air Quality A Guide on Indoor Air Quality Certification Scheme for Offices and Public Places, The Government of the HKSAR, Indoor Air Quality Management Group, January 2019 On-site measurement of : - Carbon Dioxide Annex 4 (a), as documented in SOP-ENV-IAQ-4 (Non-dispersive infrared NDIR) - Carbon Monoxide Annex 4 (a), as documented in SOP-ENV-IAQ-5 (Electrochemical sensor) - Formaldehyde Annex 4 (c), as documented in SOP-ENV-IAQ-15 (Photoelectric photometry detector) (Gas sensitive electrochemical sensor) - Nitrogen Dioxide Annex 4 (d), as documented in SOP-ENV-IAQ-16 (Electrochemical Sensor) - Ozone Annex 4 (e), as documented in SOP-ENV-IAQ-1 (Heated metal oxide semiconductor and gas sensitive semiconductor) - Radon Annex 4 (b), as documented in SOP-ENV-IAQ-9 (Electrostatic collection of alpha-emitters with spectral analysis) - Respirable Suspended Particulate Annex 4 (f), as documented in SOP-ENV-IAQ-3 (Light scattering laser diode) - Total Volatile Organic Compound Annex 4 (g), as documented in SOP-ENV-IAQ-8 (Photo-ionization sensor) On-site sampling of : - Airborne Bacteria Annex 4 (h), as documented in SOP-ENV-IAQ-12 (Single-stage Impactor) - Formaldehyde Annex 4 (c), as documented in SOP-ENV-IAQ-11 & 20 (Passive sampler & active sampling DNPH sorbent tube sampler) - Nitrogen Dioxide Annex 4 (d), as documented in SOP-ENV-IAQ-10 (Passive sampler) Walkthrough Inspection Clauses 13 and 14 Mould Clause 20 IAQ Compliance Assessment Clauses 16 to 19 and Clauses 21 to 40

Contact Details


Page 1 of 1

Contact details last updated on 18 February 2016

017

Acumen Environmental Engineering and Technologies Company Limited

浩科環境工業有限公司 ADDRESS

地址 :

Lot 12, Tam Kon Shan Road, North Tsing Yi, Hong Kong

香港青衣(北)担杆山路 12 號地段

ENQUIRY 查詢

: Mr Jacky LEUNG Chung-ho, Technical Manager 梁仲豪先生，技術經理

TELEPHONE 電話

: 2333 6823

FAX 傳真

: 2333 1316

E-MAIL


WEBSITE ADDRESS

網址 : www.acumen-env.com


: Public 公眾

mailto:[email protected]://www.acumen-env.com/



Page 1 of 3

Issue Date: 28 June 2019

Ref: HKIAS017-24

017


浩科環境工業有限公司

ADDRESS

地址 : Lot 12, Tam Kon Shan Road, North Tsing Yi, Hong Kong

香港青衣(北)担杆山路 12號地段


檢驗機構類別 : A : Provides ‘third party’ inspection service to the public 向公眾提供「第三方」檢驗服務


FIELD

認可檢驗領域

: Indoor Air Quality Inspection室內空氣質素檢驗



Page 2 of 3


Ref: HKIAS017-24

017




香港青衣(北)担杆山路 12號地段 Indoor Air Quality Inspection 室內空氣質素檢驗

ITEM INSPECTED





OR STANDARD





September 2003


- Temperature Annex 3 (a), as documented in QP-15A-1

(Temperature sensor; thermistor)

- Relative Humidity Annex 3 (a), as documented in QP-15A-2

(Humidity sensor capacitive measurement principle)

- Air Movement Annex 3 (a), as documented in QP-15A-3

(Hot wire velocity probe)

- Carbon Dioxide Annex 3 (b), as documented in QP-15A-4


- Carbon Monoxide Annex 3 (b), as documented in QP-15A-5


- Respirable Suspended Particulate Annex 3 (g), as documented in QP-15A-6


- Total Volatile Organic Compound Annex 3 (h), as documented in QP-15A-10


- Radon Annex 3 (c), as documented in QP-15A-11


analysis)

- Ozone Annex 3 (f), as documented in QP-15A-8

(Heated metal oxide semiconductor and gas sensitive

semiconductor)


- Airborne Bacteria Annex 3 (i), as documented in QP-15A-12


- Formaldehyde Annex 3 (d), as documented in QP-15A-9

(Passive sampler)

- Nitrogen Dioxide Annex 3 (e), as documented in QP-15A-7

(Passive sampler)

Walkthrough Inspection Clause 11

IAQ Compliance Assessment Clause 13 to Clause 28



Page 3 of 3


Ref: HKIAS017-24

017




香港青衣(北)担杆山路 12號地段 Indoor Air Quality Inspection 室內空氣質素檢驗

ITEM INSPECTED





OR STANDARD





January 2019


- Carbon Dioxide Annex 4 (a), as documented in QP-15A-4


- Carbon Monoxide Annex 4 (a), as documented in QP-15A-5


- Radon Annex 4 (b), as documented in QP-15A-11


analysis)

- Formaldehyde Annex 4 (c), as documented in QP-15A-9a

(Electrochemical Sensor and Photoelectric Photometry

Sensor)

- Nitrogen Dioxide Annex 4 (d), as documented in QP-15A-7a

(Electrochemical Sensor)

- Ozone Annex 4 (e), as documented in QP-15A-8

(Heated metal oxide semiconductor and gas sensitive

semiconductor)

- Respirable Suspended Particulate Annex 4 (f), as documented in QP-15A-6


- Total Volatile Organic Compound Annex 4 (g), as documented in QP-15A-10



- Airborne Bacteria Annex 4 (h), as documented in QP-15A-12

(Single-stage Impactor)

- Formaldehyde Annex 4 (c), as documented in QP-15A-9

(Passive sampler)

- Nitrogen Dioxide Annex 4 (d), as documented in QP-15A-7

(Passive sampler)

Walkthrough Inspection Clauses 13 and 14

Mould Clause 20

IAQ Compliance Assessment Clauses 16 to 19 and Clauses 21 to 40


021

Acoustics and Air Testing Laboratory Co. Ltd. 聲學及空氣測試實驗室有限公司 ADDRESS 地址

:

Room 422, Leader Industrial Centre, 57-59 Au Pui Wan Street, Fo Tan, Shatin, NT, Hong Kong 香港新界沙田火炭坳背灣街 57-59 號利達工業中心 422 室

ENQUIRY 查詢

: Dr POON Wai-yin, Technical Director 潘偉賢博士，技術總監 Mr NG Yan-wa, Laboratory Manager 伍恩華先生，實驗所經理

TELEPHONE 電話

: 2668 3423

FAX 傳真

: 2668 6946

E-MAIL 電郵

: [email protected]


: http://www.aa-lab.com


: Public 公眾

Contact details last updated on 17 February 2016

mailto:[email protected]://www.aa-lab.com/

Scope of Accreditation Registration No. HKIAS 021 Page 1 of 3 Issue Date: 25 November 2019 Ref: HKIAS021-25

021

Acoustics and Air Testing Laboratory Co. Ltd. 聲學及空氣測試實驗室有限公司 ADDRESS 地址

: Room 422, Leader Industrial Centre, 57-59 Au Pui Wan Street, Fo Tan, Shatin, NT, Hong Kong 香港新界沙田火炭坳背灣街 57-59 號利達工業中心

422 室






021

Acoustics and Air Testing Laboratory Co. Ltd. 聲學及空氣測試實驗室有限公司







Indoor Air Quality A Guide on Indoor Air Quality Certification Scheme for Offices and Public Places, The Government of the HKSAR, Indoor Air Quality Management Group, September 2003 On-site measurement of : - Temperature Annex 3 (a), as documented in IAQ-SOP-01 (Temperature sensor; thermistor) - Relative Humidity Annex 3 (a), as documented in IAQ-SOP-02 (Humidity sensor capacitive measurement principle) - Air Movement Annex 3 (a), as documented in IAQ-SOP-03 (Hot wire velocity probe) - Carbon Dioxide Annex 3 (b), as documented in IAQ-SOP-04 (Non-dispersive infrared NDIR) - Carbon Monoxide Annex 3 (b), as documented in IAQ-SOP-05 (Electrochemical sensor) - Respirable Suspended Particulate Annex 3 (g), as documented in IAQ-SOP-06 (Light scattering laser diode) - Total Volatile Organic Compound Annex 3 (h), as documented in IAQ-SOP-07 (Photo-ionization sensor) - Radon Annex 3 (c), as documented in IAQ-SOP-08 (Electrostatic collection of alpha-emitters with spectral analysis) - Ozone Annex 3 (f), as documented in IAQ-SOP-09 (Gas sensitive semiconductor) On-site sampling of : - Airborne Bacteria Annex 3 (i), as documented in IAQ-SOP-10 (Single stage impactor) - Formaldehyde Annex 3 (d), as documented in IAQ-SOP-11 (Passive sampler) - Nitrogen Dioxide Annex 3 (e), as documented in IAQ-SOP-12 (Passive sampler) Walkthrough Inspection Clause 11 IAQ Compliance Assessment Clause 13 to Clause 28


021

Acoustics and Air Testing Laboratory Co. Ltd. 聲學及空氣測試實驗室有限公司







Indoor Air Quality A Guide on Indoor Air Quality Certification Scheme for Offices and Public Places, The Government of the HKSAR, Indoor Air Quality Management Group, January 2019 On-site measurement of : - Carbon Dioxide Annex 4 (a), as documented in IAQ-SOP-04 (Non-dispersive infrared NDIR) - Carbon Monoxide Annex 4 (a), as documented in IAQ-SOP-05 (Electrochemical sensor) - Formaldehyde Annex 4 (c), as documented in IAQ-SOP-11 (Electrochemical sensor) - Nitrogen Dioxide Annex 4 (d), as documented in IAQ-SOP-12 (Gas Senstitive Electrochemical Sensor) - Ozone Annex 4 (e), as documented in IAQ-SOP-09 (Gas sensitive semiconductor) - Radon Annex 4 (b), as documented in IAQ-SOP-08 (Electrostatic collection of alpha-emitters with spectral analysis) - Respirable Suspended Particulate Annex 4 (f), as documented in IAQ-SOP-06 (Light scattering laser diode) - Total Volatile Organic Compound Annex 4 (g), as documented in IAQ-SOP-07 (Photo-ionization sensor) On-site sampling of : - Airborne Bacteria Annex 4 (h), as documented in IAQ-SOP-10 (Single-stage Impactor) - Formaldehyde Annex 4 (c), as documented in IAQ-SOP-11 (Passive sampler) - Nitrogen Dioxide Annex 4 (d), as documented in IAQ-SOP-12 (Passive sampler) Walkthrough Inspection Clauses 13 and 14 Mould Inspection Clause 20 IAQ Compliance Assessment Clauses 16 to 19 and Clauses 21 to 40


022

Qualitech Testing & Consultancy Limited 匯駿檢測及顧問有限公司 ADDRESS 地址

:

Flat E & F, 9/F, Block B, Universal Industrial Centre,19-25 Shan Mei Street, New Territories, HK 香港新界火炭山尾街 19-25 號宇宙工業中心 B 座 9 樓 E 及 F 室

ENQUIRY 查詢

: Mr Ringo LAM Kin-sun, Deputy General Manager 林建燊先生, 副總經理

TELEPHONE 電話

: 2185 0900

FAX 傳真

: 2687 6752

E-MAIL 電郵

: [email protected]


: www.qtc-hk.com


: Public 公眾

Last updated on 17 January 2018

mailto:[email protected]://www.qtc-hk.com/

Scope of Accreditation Registration No. HKIAS022 Page 1 of 2 Issue Date: 17 January 2018 Ref: HKIAS022-12

022

Qualitech Testing & Consultancy Limited 匯駿檢測及顧問有限公司 ADDRESS 地址

: Flat E & F, 9/F, Block B, Universal Industrial Centre, 19-25 Shan Mei Street, New Territories, HK 香港新界火炭山尾街 19-25 號宇宙工業中心 B 座 9 樓 E 及

F 室





Scope of Accreditation Registration No. HKIAS022 Page 2 of 2 Issue Date: 17 January 2018 Ref: HKIAS022-12

022

Qualitech Testing & Consultancy Limited 匯駿檢測及顧問有限公司

Flat E & F, 9/F, Block B, Universal Industrial Centre, 19-25 Shan Mei Street, New Territories, HK 香港新界火炭山尾街 19-25 號宇宙工業中心 B 座 9 樓 E 及 F 室






Welding Inspection Inspection/approval of welding procedures BS EN ISO 15609: Part 1: 2004 (MMAW, SAW, TIG, MIG, MAG, FCAW) in conjunction with one of the following inspection methods: BS 4870: Part 1: 1981 + Amd. 6293: 1990 BS EN 288: Part 3: 1992 + Amd. 9736: 1997 + Amd. 10026 Corr. No. 1: 1998 BS EN ISO 15613: 2004 BS EN ISO 15614: Part 1: 2004 + Al: 2008 + A2: 2012 Inspection/approval of welder testing BS 4871: Part 1: 1982 + Amd. 5697: 1987 (MMAW, SAW, TIG, MIG, MAG, FCAW) BS 4872: Part 1: 1982 + Amd. 4640: 1984 BS EN 287: Part 1: 2004 BS EN 287: Part 1: 2011 BE EN ISO 9606: Part 1: 2013 ISO 9606: Part 1: 1994 + Amd. 1: 1998 Inspection/approval of metal arc welding BS 7123: 1989 of steel for concrete reinforcement (MMAW, MIG, MAG, FCAW, SAW) Inspection/approval of welding of reinforcing BS EN ISO 17660: Part 1: 2006 steel for load-bearing welded joints (MMAW, MIG, MAG, FCAW, SAW) Inspection/approval of fusion welding BS 4570: 1985 of steel castings (MMAW, MIG, MAG, FCAW, SAW)

Inspection/approval of arc stud welding BS EN ISO 14555: 2017 procedure Inspection/approval of qualification test BS EN ISO 14732: 2013 for mechanised and automatic welding


023

Suntech Testing Limited. 新科試驗有限公司 ADDRESS 地址

:

Flat E, 13 Floor, Block 1, Goldfield Industrial Building, 144-150, Tai Lin Pai Road, Kwai Chung, N T, Hong Kong 香港新界葵涌大連排道 144 -150 號金豐工業大廈第一期 13 字樓 E室

ENQUIRY 查詢

: Mr Eddie LEE Yip-bun, General Manager 李業斌先生，總經理

TELEPHONE 電話

: 2152 1018

FAX 傳真

: 2152 9633

E-MAIL 電郵

: [email protected]


: -


: Public 公眾

Contact details last updated on 20 July 2018

mailto:[email protected]

Scope of Accreditation Registration No. HKIAS 023 Page 1 of 2 Issue Date: 8 October 2019 Ref: HKIAS023-15

023

Suntech Testing Limited 新科試驗有限公司 ADDRESS 地址

: Flat E, 13 Floor, Block 1, Goldfield Industrial Building, 144-150, Tai Lin Pai Road, Kwai Chung, N T, Hong Kong 香港新界葵涌大連排道 144 -150 號金豐工業大廈第一期

13 字樓 E 室



ACCREDITED INSPECTION FIELD 認可檢驗範圍


Scope of Accreditation Registration No. HKIAS 023 Page 2 of 2 Issue Date: 8 October 2019 Ref: HKIAS023-15

023

Suntech Testing Limited 新科試驗有限公司

Flat E, 13 Floor, Block 1, Goldfield Industrial Building, 144-150, Tai Lin Pai Road, Kwai Chung, N T, Hong Kong 香港新界葵涌大連排道 144 -150 號金豐工業大廈第一期 13 字樓 E 室






Welding Inspection Inspection of welding procedures BS 4870: Part 1: 1981+ Amd. 4322: 1983 (MMAW, TIG, MIG, MAG, FCAW, SAW) + Amd. 4730: 1984 + Amd. 5161: 1986 + Amd. 6293: 1990 BS EN 288: Part 3: 1992 + Amd. 9736: 1997 + Amd. 10026 Corr. No.1: 1998 BS EN ISO 15613: 2004 BS EN ISO 15614: Part 1: 2004 + A1: 2008 + A2: 2012 BS EN ISO 15614: Part 1: 2017 ISO 15613: 2004 ISO 15614: Part 1: 2004 + A1: 2008 Inspection of welder testing BS 4871: Part 1: 1982 + Amd. 4732: 1984 (MMAW, TIG, MIG, MAG, FCAW, SAW) + Amd. 5697: 1987 BS 4872: Part 1: 1982 + Amd. 4640: 1984 BS EN 287: Part 1: 1992 + Amd. 9665: 1997 + Amd. 9804: 1998 + Amd. 10009 Corr. No. 1: 1998 BS EN 287: Part 1: 2004 BS EN 287: Part 1: 2011 BS EN ISO 9606: Part 1: 2017 BS EN ISO 9606: Part 4: 1999 ISO 9606: Part 1: 1994 + Amd. 1: 1998 ISO 9606: Part 1: 2012 + Corr. 1: 2012 + Corr. 2: 2013 ISO 9606

address 地址 chung, new territories, hong kong. 香港新界葵涌 … · - manhole cover...

Documents