2014 - · pdf fileformulation guide 2014 ... body wash cream 17 back to basic clear body...
Post on 01-Mar-2018
315 Views
Preview:
TRANSCRIPT
Formulation Guide
2014
Amino acid Based ingredients for personal care
New applicationsFacial wipe for oily skin 6“Diverse” Cleansing Wipe 7Facial wash powder 8Toothpaste 9Foaming Shower Cream 10
Glycinate conceptTransparent Hair Shampoo 13Facial Cream Cleanser 14Facial Wash Cream 15Foaming Make Up Remover 16Body Wash Cream 17
Back to basicClear Body Wash 20Sulfate Free “Natural” Shampoo 21Transparent Hair Shampoo for Oily Hair 22Transparent Hair Shampoo 23Transparent Hand Soap 24
Facial washClear Facial Wash Gel 27“Natural” Facial Skin Toner 28Facial Skin Toner 29Humectant-Rich Anti-Aging Toner 30
Eye Shadow 34Transparent Lipstick 35Solid Fragrance Clear Gel 36BB Balm 37“Natural” Skin Care Cream 38
Formulation finder 40Contact 43
Solutions,inspired from Nature
Amino acids are called the source of LIFE for good reasons. Our bodies’ muscles, organs, SKIN and HAIR are all made up of proteins, which are unique combinations of 20 types of AMINO ACIDS.
To bring the blessings of the earth and the very essence of life to more people, AJINOMOTO develops amino acid based PERSONAL CARE ingredients, FRIENDLY to people and to earth.
The aim of this formulary is to INSPIRE you in your existing or future product developments.
Cle
ansi
ngB
eaut
y en
hanc
emen
tN
ews
NewapplicationsNewS
Newapplications
Our laboratories constantly develop new ideas to sup-port you in your growth platform
“Diverse” Cleansing wipeThis rinse-free cleansing wipe is appropriate to use on a variety of skin areas, including face, hands, and baby’s bottom. The wipe contains AMISOFT ECS-22SB as an economic, mild acyl-glutamate surfactant that selectively cleanses the skin by removing the dirt while leaving the skin undamaged. The after-feel is clean, non-sticky, soft, and conditioned to the touch. AJIDEW NL-50 performs its role as the skin-identical component of the natural moisturizing factor.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A POLYSORBATE-20 0.60 Solubilizing agent LIPOSORB L-20
LIPO CHEMICALS, INC
LAURYL LACTATE 0.25 Emollient /
Spreadability, feel,
moisturization
SCHERCEMOL LL ESTER
LUBRIzOL CORP.
FRAGRANCE 0.10
PHENOxYETHANOL, CAPRYLYL
GLYCOL, HExYLENE GLYCOL
0.80 Preservative DIOCIDE / DIOW, DIST. BY
CENTERCHEM, INC
B BIS PEG-8 DIMETHICONE 0.50 Silicone / After-feel GRANSIL Vx-409
GRANT INDUSTRIES
C AMISOFT ECS-22SB (30%) 2.50 Gentle surfactant /
Cleansing
AJINOMOTO CO. INC
WATER 94.75
AJIDEW NL-50 0.50 Humectant /
Moisturization
AJINOMOTO CO. INC
D CITRIC ACID q.s. to pH
5.5
100.0
PrOCEDurE:
1 Combine part A with mixing at room temperature, add part B, then part C.
2 Mix well and adjust the pH with citric acid (part D).
3 Saturate the wipe cloth and store in an air-tight container.
TECHNICAL INFOrMATION:
Appearance clear solutionFinal pH 5.50Stability > 1 month @ 45, 25, 3°C
Facial wipe for Oily SkinAJIDEW ZN-100 is a multifunctional active ingredient that has anti-sebum oil-reducing properties while also providing anti-aging benefits by reducing collagenase activity via inhibition of Activator Protein-1.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A WATER 83.20 Diluent
B AJIDEW ZN-100 1.00 Active ingredient /
Anti-aging, sebum
appearance
reduction
AJINOMOTO CO. INC
HYDROxYPROPYLTRIMONIUM
HYALURONATE
0.05 Cationic active
ingredient
Conditioned skin
feel
HYALOVEIL-P / KEWPIE
CORP
C WITCH HAzEL (HAMAMELIS
VIRGINIANA) ExTRACT, WATER,
ETHANOL
15.00 Active natural
extract /
Astringency, oil
reduction
WITCH HAzEL DISTILLATE
D PHENYLETHANOL, ETHYLHExYL
GLYCERIN
0.75 Preservative SENSIVA PA-20
SCHüLKE & MYER
100.0
PrOCEDurE:
1 Dissolve part B in part A with thorough mixing at room temperature.
2 Add parts C and D, mix well.
3 Saturate the wipe cloth with the solution and store in an air-tight container.
TECHNICAL INFOrMATION:
pH 4.90Stability > 1 month at 45, 25, 3°C
7 Newapplications
ASC
26-119-1ASC
26-
94-3
ToothpasteA SDS-free mild toothpaste.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A CELLULOSE GUM 1.00 Binder CEKOL 3000 / CP KELCO
WATER 49.00
B DIPOTASSIUM GLYCYRRHIzATE 0.10 Active/ anti-
inflammatry
DIPOTASSIUM
GLYCYRRHIzATE
JUNSEI CHEMICAL
SODIUM MONOFLUOROPHOSPHATE 0.10 Active/ anti-caries SODIUM
FLUOROPHOSPHATE
WAKO
SODIUM SACCHARIN 0.15 Flavor SODIUM SACCHARIN
DIHYDRATE / WAKO
WATER Balance
C GLYCERIN 10.00 Humectant
SORBITOL 10.00 Humectant
D SILICA 6.50 Abrasive SYLOPURE 25 / FUJI SILYSIA
SILICA 15.00 Abrasive SYLOPURE 35 / FUJI SILYSIA
E AMISOFT MS-11 2.00 Foaming agent AJINOMOTO CO. INC
F FRAGRANCE q.s.
100.00
PrOCEDurE:
1 Disperse part A at room temperature.
2 Dissolve part B at room temperature.
3 Add part B and C to part A with stirring.
4 Add part D to part A and disperse well at 85°C.
5 Add part E with stirring and cool down to 40°C.
6 Add part F with stirring and cool to room temperature.
TECHNICAL INFOrMATION:
pH 6.6Stability 0, 25, 45°C, Cycle, for 1 month
Facial wash § PowderFacial wash in a powder format using mild surfactants Amisoft LS-11 and Amisoft MS-11. Product has to be emulsified in the hands and then applied on the face for a mild cleansing. Amihope LL imports soft sensory feeling.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A AMISOFT LS-11 15.0 Cleansing
surfactant
AJINOMOTO CO. INC
AMISOFT MS-11 15.0 Cleansing
surfactant
AJINOMOTO CO. INC
MANNITOL 10.0 Humectant MARINE CRYSTAL
TOWA CHEMICAL
INDUSTRY
TALC 20.0 Dispersing agent MICROACE P-3
NIPPON TALC
zEA MAYS (CORN) STRACH 23.5 Vehicle ST STARCH C(W)
NIPPON STARCH
CHEMICALS
GLUCOSE 15.0 Vehicle
AMIHOPE LL 1.0 Sensory
improvement
AJINOMOTO CO. INC
AGAR 0.5 Foam stabilizer
100.0
PrOCEDurE:
1 Mix all ingredients and mill.
TECHNICAL INFOrMATION:
pH 5.5 (1% aq.)
9
TSIL-P-3-MSPW
T-31
0
Newapplications
Notes
Foaming Shower CreamA sulfate-free, DEA-free, PEG-free cold-process mild shower cream based on a combination of vegetable origin surfactants. AMILITE ACS12 provides rich foam and vegetable origin emollient nourishes the skin.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A WATER Balance
B ACRYLATES COPOLYMER (30%) 8.00 Thickening polymer SYNTHALEN W400
3V SIGMA
C ETHYLHExYL GLYCERIN,
PHENOxYETHANOL, TOCOPHEROL
0.30 Preservatives EUxYL PE9010
SCHULKE & MAYR
AMISOFT ECS-22SB (30%) 15.00 Primary foaming
surfactant
AJINOMOTO CO. INC
AMIILTE ACS-12 (30%) 5.00 Foam booster AJINOMOTO CO. INC
COCAMIDOPROPYL BETAINE (30%) 10.00 Secondary foaming
surfactant
SOFTAzOLIN CPB
KAWAKEN FINE
CHEMICALS
LAURYL GLUCOSIDE (50%) 4.70 Thickening PLANTACARE 1200UP
BASF
PRUNUS AMYGDALUS DULCIS (SWEET
ALMOND) OIL
5.00 Emollient NIKKOL SWEET ALMOND
OIL
NIKKO CHEMICALS
D CITRIC ACID (40% Aq.) 0.30 pH adjustment
E FRAGRANCE q.s.
100.0
PrOCEDurE:
1 Disperse part B in part A at room temperature.
2 Add part C in the listed order to part A and mix well.
3 While stirring gradually add part D to adjust the pH to 5.6 ~ 6.0 (The level of citric acid is presented as a rough guide).
4 Add part E.
TECHNICAL INFOrMATION:
pH 6.0 ~ 6.5Viscosity 1,000 ~ 2,000 mPa.s (B-type, Rotor No.3, 12rpm, 30sec., 25°C)Stability -5°C, 0°C, 25°C, 45°C, cycle(-5 n 40°C) for 3 months
KN
S-09
7E-4
Newapplications
11
Mild cleansing with abundant foam providing nourish-ing and refreshing feeling
Glycinate concept
Transparent Hair ShampooA cleansing shampoo which refreshes the hair and scalp. Amilite GCS-12K improves volume and smoothness of the foam while viscosity is controlled by the use of Ajidew NL-50.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A SODIUM LAURETH SULFATE (27%) 27.00 Cleansing
surfactant
EMAL E-27C
KAO
COCAMIDOPROPYL BETAINE (30%) 14.00 Co-surfactant AMPHITOL 55AB / KAO
AMILITE GCS-12K (30%) 12.00 Foam booster AJINOMOTO CO. INC
AJIDEW NL-50 (50%) 1.00 Viscosity modifier AJINOMOTO CO. INC
GLYCERIN 3.00 Moisturizer
PRESERVATIVE q.s.
POLYqUATERNIUM-10 (2%Aq.) 10.00 Hair conditioning
agent
LEOGARD GP
AKzO NOBEL SURFACE
CHEMISTRY AB
WATER Balance
B PEG-150 DISTEARATE 0.40 Thickening polymer EMANON 3299V / KAO
C CITRIC ACID (20%Aq.) 0.81
D AMODIMETHICONE 0.30 Hair conditioning
agent
Fz-4671
DOW CORNING TORAY
E FRAGRANCE q.s.
100.0
PrOCEDurE:
1 Dissolve part A at 60-70°C with stirring.
2 Add part B to part A.
3 Add part C to adjust pH to 6.9. The level of citric acid is presented as a rough guide.
4 Cool down to 45°C, and add part D and part E.
5 Cool down to room temperature with stirring.
TECHNICAL INFOrMATION:
pH 6.9Viscosity 4,800-5,200 mPa.s (B type, Rotor No.3, 12rpm, 30sec., 25°C)Stability -5, 25, 45°C, Cycle, for one month
Glycinate concept
13
CC
S-112
Facial Cleanser § CreamAmilite GCS-12K provides creamy foam to this facial cleanser, using an economical production process without vacuum.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A AMILITE GCS-12K(30% ) 29.20 Cleansing
surfactant
AJINOMOTO CO. INC
SODIUM LAURETH SULFATE(27%) 23.00 Cleansing
surfactant
EMAL E-27C / KAO
LAURAMIDOPROPYL BETAINE(30%) 21.00 Cleansing
surfactant
SOFTAzOLINE LPB
KAWAKEN / FINE
CHEMICALS
DISODIUM LAURETH
SULFOSUCCINATE(32%)
2.00 Emulsifier TExAPON SB-3
COGNIS
BUTYLENE GLYCOL 0.20 Humectant
WATER Balance
PRESERVATIVE q.s.
POLYqUATERNIUM-7(10%) 1.00 Film forming agent LIPOFLOW MN / LION
B ALUMINUM MAGNESIUM SILICATE 1.00 Viscosity builder VEEGUM HV GRUNULES
R.T.VANDERBILT
WATER 19.00
C TITANIUM DIOxIDE 0.20 Pigment TIPEqUE CR-50
ISHIHARA SANGYO
D CITRIC ACID (20%Aq.) 3.00
E FRAGRANCE q.s.
100.0
PrOCEDurE:
1 Thoroughly disperse part B at room temperature.
2 Dissolve part A and add part B with stirring at 70-80°C.
3 Add part C with stirring well.
4 Adjust pH to 5.7 with part D. The level of citric acid is presented as a rough guide.
5 Cool to 50°C and add part E.
6 Cool down to room temperature with stirring.
TECHNICAL INFOrMATION:
pH 5.7 Stability -5, 25, 50°C, Cycle for one month
Facial wash § CreamThis good foaming cream-type facial wash formulation employs Amilite GCS-12K (liquid type) in a simple production process.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A AMILITE GCS-12K (30%) 55.00 Cleansing
surfactant
AJINOMOTO CO. INC
WATER Balance
GLYCERIN 28.00 Humectant PRICERINE 9091
UNIqUEMA
SODIUM LAUROAMPHOACETATE
(30%)
8.00 Cleansing
surfactant
SOFTAzOLIN LHL
KAWAKEN FINE
CHEMICALS
POLYqUATERNIUM-39 (10%) 1.00 Film forming agent MERqUAT PLUS 3330
ONDEO NALCO
DISODIUM EDTA 0.05 Chelating agent
CITRIC ACID 1.20 pH adjuster
PRESERVATIVE q.s
B HYDROxYPROPYL METHYLCELLULOSE 0.04 Viscosifier METROSE 60SH-4000
SHIN-ETSU SILICONES
WATER 1.96
100.0
PrOCEDurE:
1 Dissolve part A at 60°C with stirring. The level of citric acid is presented as a rough guide.
2 Start reducing the pressure to 400mmHg.
3 Cool down to the crystallizing temperature (about 49°C) with gentle stirring.
4 When the crystallization started add part B and mix well.
5 Cool down to room temperature with stirring.
TECHNICAL INFOrMATION:
pH 6.9 (1% aqueous solution)Stability 0, 25, 50°C, Cycle(-5 n 40°C) for one month
Glycinate concept
15
SKPE
G-1
12 FC-109H
Bodywash § CreamA sulfate-free, easy-to-prepare creamy body wash with luxurious pearly appearance. Improvement of moisturizing feel is achieved by addition of AMILITE GCS-12K.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A AMILITE GCS-12K(30%) 8.0 Cleansing agent AJINOMOTO CO. INC
COCAMIDOPROPYL
BETAINE(30%)
30.0 Foam stabilizer DEHYTON K / BASF
SODIUM
COCOAMPHOACETATE(32%)
20.0 Foam stabilizer MIRANOL ULTRA C-32
SOLVAY
WATER Balance
B ACRYLATES/BEHENETH-25
METHACRYLATE COPOLYMER
5.0 Thickening agent NOVETHIx L-10
LUBRIzOL
WATER 10.0
C GLYCOL STEARATE 3.0 Pearlesing agent CITHROL EDGS-
PA-(SG) / CRODA
D PRESERVATIVE q.s.
100.0
PrOCEDurE:
1 Mix part A until uniform at room temperature.
2 Mix part B at room temperature.
3 Add part B to part A with stirring.
4 Add part C to the mixture and heat it up about 60 ~ 70°C.
5 Keep stirring until uniform.
6 Cool down to room temperature and add part D.
7 Keep stirring until uniform.
TECHNICAL INFOrMATION:
pH 7.3Viscosity 8,000 ~ 12,000 mPa.s (64, 30rpm, 30sec., 24°C)Stability 1, 25, 45°C, Cycle(-5 n 40°C), for 3 months
Foaming Make-up RemoverEasy-to-use self-foaming type make-up remover.Amilite GCS-12K is used for its foamability and fresh skin afterfeel. The stability of the foam is improved by the use of Amisafe AL-01.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A HYDROGENATED POLYISOBUTENE 1.10 Make up cleansing PERLEAM Ex / NOF
PEG-20 GLYCERYL TRIISOSTEARATE 2.70 Emulsifier EMALEx GWIS-320Ex
NIHON EMULSION
FRAGRANCE q.s.
B WATER Balance
ISOPENTYLDIOL 10.00 Solubilizer ISOPRENE GLYCOL-S
KURARAY
GLYCERIN 10.00 Moisturizer
AMILITE GCS-12K (30%) 10.00 Cleansing
surfactant
AJINOMOTO CO. INC
LAURAMIDOPROPLY
HYDROxYSULTAINE (30%)
14.00 Cleansing
surfactant
SOFTAzOLINE LSB
KAWAKEN FINE CHEMICAL
LAURYL GLUCOSIDE (50%) 2.00 Foam booster PLANTACARE 1200 UP
BASF-COGNIS
AMISAFE AL-01 0.02 Foam stabilizer AJINOMOTO CO. INC
C DISODIUM EDTA 0.10 Chelating agent
PRESERVATIVES q.s.
100.0
PrOCEDurE:
1 Mix part A until uniform at room temperature.
2 Dissolve part B with stirring at 80°C.
3 Add part C to B and dissolve at 80°C.
4 Cool to 50°C with stirring, add part A to B, stir until uniform.
5 Cool to room temperature with stirring.
TECHNICAL INFOrMATION:
pH 7.3Stability -5, 25°C, 45°C 1 month
Glycinate concept
17
AC
AC
-PNS-4D
MS-
14S-
5
Because mild cleansing products always will have a strong value in Cosmetic and Toiletry industries
CleaNSiNG
Back to basic
Sulfate Free “Natural” ShampooThis nature-inspired Sulfate free shampoo is kind to the hair and leaves the hair soft and smooth with good luster.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A AMISOFT ECS-22SB (30%) 10.00 Natural surfactant AJINOMOTO CO. INC.
COCAMIDOPORPYL BETAINE (30%) 33.00 Primary Surfactant LONzAINE C / LONzA
LAURYL GLUCOSIDE (50%) 10.00 Foam stabilizer,
viscosity control
PLANTAREN 1200 N
BASF
GLYCERYL LAURATE 2.00 Viscosity Control MONOMULS 90-L12 / BASF
WATER 43.00 Diluent
B AJIDEW NL-50 (50%) 1.00 Humectant /
moisturizer
AJINOMOTO CO. INC
PrODEW 500 (50%) 1.00 Moisturizer, hair
nourishment
AJINOMOTO CO. INC
C PRESERVATIVE qS per
supplier
Micro-organism
control
D CITRIC ACID To pH 5.5
+/-0.2
pH Adjustment
100.0
PrOCEDurE:
1 Combine ingredients in part A and heat with mixing to 65°C. When clear, cool.
2 At 55°C add ingredients of part B.
3 At 50°C add part C.
4 Cool to room temperature and adjust pH (part D).
TECHNICAL INFOrMATION:
Viscosity 2200 mPa.s (Brookfield LV-D spindle #3 @ 30 rpm @ 25°C 30 sec)Stability 4 weeks @ 3°C, 25°C, 40°C, 45°C
Clear BodywashAn extremely mild sulphate-free shower gel, using Amisoft ECS-22SB and Ajidew NL 50 which leave a pleasant soft and moisturized feel to the skin.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A AMISOFT ECS-22SB (30%) 7.5 Secondary
surfactant
AJINOMOTO CO. INC
COCAMIDOPROPYL BETAINE(30%) 26.3 Primary surfactant MIRATAINE BET C30 NP
SOLVAY
DECYL GLUCOSIDE (50%) 4.5 Co-surfactant PLANTACARE 2000UP
BASF
COCAMIDE MEA 1.0 Viscosity modifier NINOL COMF / STEPHAN
PEG-120 METHYL GLUCOSE
TRIOLEATE AND PROPANEDIOL
2.53 Thickening polymer GLUCAMATE VLT
THICKENER / LUBRIzOL
AJIDEW NL-50 (30%) 2.0 Moisturizer AJINOMOTO CO. INC
WATER Balance
B POLYSORBATE 20 1.5 Solubilizer for
fragrance
POLYSORBATE 20
NOF
FRAGRANCE
C 10% CITRIC ACID q.S. TO 5.80 2.32 pH adjustment
D PRESERVATIVE q.s.
100.0
PrOCEDurE:
1 Heat part A about 60-70°C.
2 Add part B to part A.
3 Cool down to room temperature.
4 Add part C (The level of citric acid is presented as a rough guide) and part D to mixture with gentle stirring.
TECHNICAL INFOrMATION:
pH 5.88Viscosity 1,000 ~ 1,600 mPa.sStability 1, 25, 45°C, Cycle(-5 n 40°C), for
3 months
21 Back tobasic
ASC
27-15-3A
CA
C-B
SB-2
1
Back tobasic
Transparent Hair ShampooAjidew NL-50 and Ajidew ZN-100 are combined in this shampoo formulation to improve hair condition and sebum control as well as bringing anti-bacterial activity. On top, Amilite ET-CS-12 is boosting foam quality and quantity.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A POLYqUATERNIUM-10 0.2 Conditioning agent UCARE POLYMER JR400 DOW
B WATER 10.0 EMAL E27-C / KAO
C SODIUM LAURETH SULFATE (27%) 40.0 Cleansing surfactant DEHYTON K / BASF
COCAMIDOPROPYL BETAINE (30%) 10.0 Cleansing surfactant
AMILITE ET-CS-12 (25%) 7.0 Foam booster AJINOMOTO CO. INC
GLYCERYL CAPRATE 2.0 Viscosity modifier SANSOFT NO.760 KAWAKEN FINE CHEMICAL
PEG-7 POLYGLYCERYL COCOATE 2.0 Emollient CETIOL HE / BASF
AJIDEW NL-50 (50%) 2.0 Moisturizer AJINOMOTO CO. INC
SODIUM CHLORIDE 0.8 Viscosity modifier
PRESERVATIVE q.s
WATER Balance
D FRAGRANCE q.s
E CITRIC ACID 0.1 pH adjuster
WATER q.s.
F AJIDEW ZN-100 0.5 Sebum control, Anti-bacterial
AJINOMOTO CO. INC
WATER 5.0
100.0
PrOCEDurE:1 Thoroughly disperse part A in part B at room temperature.2 Add part B to part C and heat to 80°C. Mix until uniform. 3 Cool to 50°C and add part D.4 Cool to room temperature with stirring.5 Adjust pH with part E (The level of citric acid is presented as a rough guide).
Stir until homogeneous. 6 Add part F and stir until homogeneous. Readjust pH to 5.5 with part E.
TECHNICAL INFOrMATION:
pH 5.5Viscosity 3,900 ~ 4,000 mPa.s (B type, rotor No.4, 30rpm, 30sec., 25°C)Stability 45°C, 25°C, 0°C, cycle (-5°C n 40°C) for 1 month
Transparent Hair Shampoo for oily hairThis sulphate-free hair shampoo is formulated for normal to oily hair and scalp. Ajidew ZN-100 is a multifunctional ingredient that has sebum control and antibacterial properties. Amisafe AL-01 is used for its conditioning properties without any greasy feeling after use.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A SODIUM LAURYL SULFOACETATE 4.00 Co-surfactant NIKKOL LSA-F NIKKO CHEMICALS
LAURYL GLUCOSIDE(50%) 9.00 Co-surfactant PLANTACARE 1200UP / BASF
AMISOFT CS-22 (25%) 20.00 Primary cleansingsurfactant
AJINOMOTO CO. INC
PRESERVATIVES q.s.
WATER 45.00
B GLYCERYL CAPRATE 3.00 Viscosity modifier SUNSOFT NO.760 / TAIYO KAGAKU
C AMISAFE AL-01 0.40 Conditioning Agent AJINOMOTO CO. INC
D FRAGRANCE q.s.
E MAGNESIUM CHLORIDE 1.50 Viscosity modifier
F CITRIC ACID 0.50 pH Adjuster
WATER Balance
G AJIDEW ZN-100 0.50 Sebum control,Anti-bacterial
AJINOMOTO CO. INC
WATER 5.00
100.0
PrOCEDurE:
1 Dissolve part A at 80°C with stirring.
2 Mix until uniform and add part B.
3 Mix until uniform and add part C.
4 Cool down to 45°C with stirring, add part D and part E.
5 Cool down to room temperature with stirring, add part F to adjust the pH to 6.0 (The level of citric acid is presented as a rough guide).
6 Add part G with stirring.
TECHNICAL INFOrMATION:
pH 5.5Viscosity 1,800 ~ 2,500 mPa.s (B type, rotor No.3, 30rpm, 30sec., 25°C)Stability 0°C, 25°C, 45°C, Cycle(-5 n 40°C) for 1 month 23
CG
-ZN19
NSA
I-ZN
02
Notes
Transparent HandsoapThis clear hand soap contains Ajidew ZN-100, an ingredient with anti-bacterial properties. Amisoft ECS-22SB and Ajidew NL-50 impart moisturized skinfeel to hands after washing.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A SODIUM LAURETH SULFATE (27%) 35.00 Primary cleansing
surfactant
EMAL E-27C/KAO
COCAMIDEPROPYL BETAINE (30%) 15.00 Co-surfactant AMPHITOL 55AB/KAO
AMISOFT ECS-22SB (30%) 1.00 Moisturizing mild
sufractant
AJINOMOTO CO. INC
AJIDEW NL-50 (50%) 2.00 Moisturizer AJINOMOTO CO. INC
PRESERVATIVE q.s.
WATER Balance
B CITRIC ACID 0.27 pH adjuster
WATER q.s.
C AJIDEW ZN-100 0.50 Anti-bacterial AJINOMOTO CO. INC
WATER 5.00
100.0
PrOCEDurE:
1 Mix part A with stirring at 80°C.
2 Adjust pH to about 6.0 by part B (The level of citric acid is presented as a rough guide), and add part C.
TECHNICAL INFOrMATION:
pH 5.5Viscosity 2,800 ~ 4,000 mPa.s (B type, rotor No.3, 30rpm, 30sec., 25°C)Stability 0°C, 25°C, 45°C, Cycle(-5 n 40°C) for 1 month
HA
N -
ZN
02
25 Back tobasic
Mild and moisturizing ingredients to clean and nourish your face
Clear Facial wash § GelA SLES-free facial cleansing gel which imparts soft and moisturized feel to the skin.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A AMISOFT ECS-22SB (30%) 15.0 Secondary
surfactant
AJINOMOTO CO. INC
COCAMIDOPROPYL BETAINE(30%) 52.5 Primary surfactant MIRATAINE BET C30 NP
SOLVAY
DECYL GLUCOSIDE(50%) 9.0 Foam stabilizer PLANTACARE 2000UP
BASF
COCAMIDE MEA 2.0 Viscosity modifier NINOL COMF / STEPHAN
PEG-120 METHYL GLUCOSE
TRIOLEATE AND PROPANEDIOL
1.0 Thickening polymer GLUCAMATE VLT
THICKENER / LUBRIzOL
AJIDEW NL-50 (50%) 2.0 Moisturizer AJINOMOTO CO. INC
WATER Balance
B 10% CITRIC ACID q.S. TO 5.80 4.24 pH adjustment
C PRESERVATIVE q.s.
100.0
PrOCEDurE:
1 Heat part A at around 60-70°C.
2 Add part B (The level of citric acid is presented as a rough guide) to part A.
3 Cool down to room temperature.
4 Add part C to mixture with gentle stirring.
TECHNICAL INFOrMATION:
pH 5.86Viscosity 6,000 ~ 12,000 mPa.sStability 1, 25, 45°C, Cycle(-5 n 40°C), for 3 months
Facial wash
27
AC
AC
-FSB-6
Faciallwash
Facial Skin TonerA hazy facial skin toner enriched with pseudo-ceramide ELDEW PS-203 r.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A ELDEW PS-203 r 0.35 Emolient AJINOMOTO CO. INC
CETYL ETHYLHExANOATE 0.15 Emolient EMALEx CC168
NIHON EMULSION
PPG-8-CETETH-20 0.50 Emulsifier NIKKOL PBC-44
NIKKO CHEMICALS
PPG-6-DECYLTETRADECETH-30 0.50 Emulsifier NIKKOL PEN-4630
NIKKO CHEMICALS
GLYCERIN 1.25 Moisturizer
B WATER 5.00
C DIPROPYLENE GLYCOL 2.00 Moisturizer
BUTYLENE GLYCOL 3.00 Moisturizer
SODIUM CITRATE 0.20 pH Adjuster
PrODEW P-DS-12(30%) 3.33 Moisturizer AJINOMOTO CO. INC
WATER Balance
D CITRIC ACID (20% Aq.) 0.58 pH Adjuster
100.0
PrOCEDurE:
1 Dissolve part A with stirring at 70°C.
2 Add part B slowly at 70°C with stirring.
3 Cool down to 40°C with gentle stirring.
4 Dissolve part C in a separate vessel.
5 Add part C gradually (The level of citric acid is presented as a rough guide) to part A with stirring and cool to room temperature.
6 Adjust the pH with part D.
TECHNICAL INFOrMATION:
pH 5.5Stability 0, 25, 45°C, Cycle (-5°C n 40°C), for 1 month
“Natural” Facial Skin TonerAn alcohol-free skin toner formulated only with natural ingredients such as Ajidew NL-50 and Prodew P-DS-12 which bring good nourishing properties.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A SODIUM HYALURONATE 0.10 Moisturizer FCH-120
KIKKOMAN BIOCHEMIFA
B WATER Balance
C SORBITOL 5.00 Moisturizer SORBITOL / KAO
AJIDEW NL-50 (50%) 3.00 Moisturizer AJINOMOTO CO. INC
GLYCERIN 5.00 Moisturizer
PROPANEDIOL 3.00 zEMEA PROPANEDIOL
DUPONT
PrODEW P-DS-12 (30%) 1.67 Moisturizer AJINOMOTO CO. INC
SODIUM CITRATE (20% Aq.) 0.20 pH adjuster
D CITRIC ACID 0.05 pH adjuster
100.0
PrOCEDurE:
1 Add part A to part B with stirring.
2 After confirmation of dissolution, add part C (The level of citric acid is presented as a rough guide) to part A with stirring.
3 Add part D to part A to adjust the pH.
TECHNICAL INFOrMATION:
pH 5.5Stability -5, 25, 45°C, Cycle (-5°C n 40°C),
for 3 months
29
SSPB-CP-2
NTO
N-C
P-3
Faciallwash
Notes
Humectant-Rich anti-aging TonerThis moisturizing toner contains Prodew 500 which is an optimized mix of humectant ingredients and amino acids, as well as anti-aging compounds. Ajidew ZN-100 is a multifunctional active ingredient that has anti-sebum oil-reducing properties while also providing anti-aging benefits by reducing collagenase activity via inhibition of Activator Protein-1.
PArT INGrEDIENTS %W/W FuNCTION TrADE NAME / SuPPLIEr
A TREHALOSE 0.25 Humectant / Moisturization
TREHALOSE / HYASHIBARA
C12-13 ALKYL GLYCERYL HYDROLYzED HYALURONATE
0.05 Active ingredient / Skin barrier repair, moisturization
HYALOREPAIR / KEWPIE CORP.
AJIDEW ZN-100 1.00 Active ingredient / Anti-aging, sebum appearance reduction
AJINOMOTO CO. INC.
B WATER 89.50 Diluent
GLYCERIN 3.00 Humectant / Moisturization
C PrODEW 500 (50%) 1.50 Humectant / Moisturization
AJINOMOTO CO. INC.
SACCHARIDE ISOMERATE 2.00 Humectant / Moisturization
PENTAVITIN / DSM NUTRITIONAL PRODUCTS
PROPYLENE GLYCOL, WATER, ECHINACEA ANGUSTIFOLIA ExTRACT, CENTELLA ASIATICA ExTRACT, FUCUS VESICULOSUS ExTRACT, TRIGONELLA FOENUM-GRAECUM SEED ExTRACT
1.00 Active natural extract / Anti-aging, moisturization, skin firming
POLYPLANT FIRMING PROVITAL GROUP
WATER, BUTYLENE GLYCOL, SAKURA (PRUNUS LANNESIANA) FLOWER ExTRACT, ASCORBIC ACID, MALIC ACID
0.20 Active natural extract / Anti-aging, moisturization
SAKURA ExTRACT LC ORYzA OIL & FAT CORP
PROPANEDIOL, WATER, BRESENIA SCHREBERI LEAF ExTRACT
0.50 Active natural extract / Antioxidant, moisturization
WATERSHIELD ExTRACT LC ORYzA OIL & FAT CORP.
PHENOxYETHANOL, ETHYLHExYL GLYCERIN 1.00 Preservative EUxYL PE9010 SCHüLKE & MAYR
100.0
PrOCEDurE:
1 Combine part B and add part A ingredients in sequential order with thorough mixing until dissolved.
2 Add part C.
TECHNICAL INFOrMATION:
pH 4.50Stability > 1 month @ 45 °C
ASC
26-
86-1
B
31 Faciallwash
Ideas to make your life more beautifulBeauTyeNHaNCeMeNT
Transparent lipstickThis formulation has excellent transparency and imparts non sticky feeling.
PArT INGrED IENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A GELATINIZATION AGENT EB-21 2.0 Oil gelling agent AJINOMOTO CO. INC
GELATINIZATION AGENT GP-1 3.0 Oil gelling agent AJINOMOTO CO. INC
OCTYLDODECANOL 20.0 Initial solvent RISONOL 20SP / KOKYU
ALCOHOL KOGYO
B DIISOSTEARYL MALATE 17.0 Emollient HAIMALATE DIS / KOKYU
ALCOHOL KOGYO
ELDEW PS-203r 5.0 Solubilizing agent,
emollient
AJINOMOTO CO. INC
CYCLOPENTASILOxANE 2.0 Emollient SH245 FLUID / DOW
CORNING
TOCOPHEROL q.s.
PRESERVATIVE q.s.
C HYDROGENATED POLYISOBUTENE Balance PARLEAM V / NOF
D PEARLESCENT PIGMENTS q.s. Pigment REFLECKS RAYS OF RED
ENGELHARD
100.0
PrOCEDurE:
1 Dissolve part A at 110°C with stirring.
2 Add part B to part A at 95°C, and mix with stirring.
3 Add part C at 95°C, and mix with stirring.
4 Add part D at 95°C, and mix with stirring.
5 Cool down to room temperature.
TECHNICAL INFOrMATION:
Stability 40°C, 25°C, 5°C for one month
eye ShadowA unique color balm formulated with an amino acid derived gelling agent, Gelatinization Agent GP-1 providing good spreadability. Thanks to Amihope LL, our functional powder, the smooth oil gel turns into powder on the skin, leaving non-oily silky soft feel.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A TRIETHYLHExANOIN 39.42 Emollient NIKKOL TRIFAT S-308 NIKKO CHEMICALS
CYCLOPENTASILOxANE 5.19 Emollient SILICONE STV-5 DOW CORNING
SILICA, METHICONE 4,67 Texturizer SI-5 SILDEx H-52 / DAITO
MICA, DEA-C8-18 PERFLUOROALKYLETHYL PHOSPHATE
1.85 Extender PF-5 MICA NO.5500 DAITO
POLYMETHYLSILSESqUIOxANE 5.93 Texturizer TOSPEARL 2000B MOMENTIVE
AMIHOPE LL 1.00 Sensory improver AJINOMOTO CO. INC
B MICA AND TITANIUM DIOxIDE AND CAMINE
12.76 Pigment COLORONA MAGENTA MERCK
MICA AND TITANIUM DIOxIDE 5.0 Pigment KC219 WENzHOU KUNCAI PEARLESCENT PIGMENT CO., LTD
C OCTYLDODECANOL*8 18.75 Emollient, solubilizer for GP-1
EUTANOL G BASF
GELATINIZATION AGENT GP-1 3.50 Oil gelling agent AJINOMOTO CO. INC
100.0
PrOCEDurE:
1 Mix part B until uniform at room temperature.
2 Mix part A at room temperature.
3 Dissolve part C at 120°C with stirring.
4 Heat part A around 80°C.
5 Add part B to part A while heating around 80°C.
6 Add part C and continue to mix at 80°C.
7 Pour into a jar quickly.
8 Cool down to room temperature without mixing.
TECHNICAL INFOrMATION:
Stability 1, 25, 45°C, Cycle(-5, 40°C), for 1 months
35
LGS-S1
AC
AC
-ESH
-9
BB Balm with UV protectionA highly concealing foundation formulation using our pseudo-ceramide ingredient Eldew PS-203r. Amihope LL, our functional powder and our amino acid derived Gelatinization Agent GP-1 provide good spreadability, turning the smooth oil gel into powder, leaving a non-oily silky soft feel on the skin.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A TRIETHYLHExANOIN 38.92 Emollient NIKKOL TRIFAT S-308 NIKKO CHEMICALS
CYCLOPENTASILOxANE 5.20 Emollient SILICONE STV-5 DOW CORNING
TITANIUM DIOxIDE 7.42 UV filter TTO-D2 ISHIHARA SANGYO
SILICA, METHICONE 4.67 Texturizer SI-5 SILDEx H-52 DAITO KASEI
MICA, DEA-C8-18 PERFLUOROALKYLETHYL PHOSPHATE
1.85 Extender PF-5 MICA NO.5500 DAITO KASEI
POLYMETHYLSILSESqUIOxANE 5.93 Texturizer TOSPEARL 2000B MOMENTIVE
AMIHOPE LL 1.00 Sensory improver AJINOMOTO CO. INC
ELDEW PS-203r 0.50 Pseudo-ceramide AJINOMOTO CO. INC
B PIGMENT DISPERSION (WHITE) 10.72 Pigment DIDW 50 DF/KOBO
PIGMENT DISPERSION (YELLOW) 1.03 Pigment DIDW 45 DYF/KOBO
PIGMENT DISPERSION (RED) 0.33 Pigment DIDW 40 DRF/KOBO
PIGMENT DISPERSION (BLACK) 0.17 Pigment DIDW 55 DBF/KOBO
C OCTYLDODECANOL 18.75 Solubilizer for GP-1 EUTANOL G/BASF
GELATINIZATION AGENT GP-1 3.50 Oil gelling agent AJINOMOTO CO. INC
100.0
PrOCEDurE:
1 Mix part B until uniform at room temperature.
2 Mix part A at room temperature.
3 Dissolve part C at 120°C with stirring.
4 Heat part A around 80 - 90°C.
5 Add part B to part A while heating around 80-90°C.
6 Add part C to mixer and mix at 80°C.
7 Pour into a jar quickly. Cool down to room temperature without mixing.
TECHNICAL INFOrMATION:
Stability 1, 25, 45°C, Cycle(-5 n 40°C), for 3 months
Solid Fragrance Clear Gel This transparent solid fragrance has both an enticing scent and appearance. A hard gel is produced by using low molecular weight amino acid-derived Gelatinization Agent GP-1 and EB-21 which, combined, form a network in the chosen oils. The resulting clear solid gel traps the fragrance and releases it upon contact with the skin. Eldew SL-205 and Eldew PS-203r are used to improve stability and moisturizing properties of the formulation.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A GELATINIZATION AGENT GP-1 2.4 Oil gelling agent AJINOMOTO CO. INC
GELATINIZATION AGENT EB-21 1.6 Oil gelling agent AJINOMOTO CO. INC
OCTYLDODECANOL 16.0 Initial solvent RISONOL 20SP / KOKYU ALCOHOL KOGYO CO., LTD.
B HYDROGENATED POLYISOBUTENE
5.00 High viscosity oil PANALANE H300E LIPO CHEMICALS, INC
HYDROGENATED POLYISOBUTENE
9.00 Low viscosity oil PANALANE L14 E LIPO CHEMICALS, INC
ELDEW SL-205 10.00 Light ester Moisturization
AJINOMOTO CO. INC
DIISOSTEARYL MALATE 9.00 High MW ester, stability Moisturization
SCHERCEMOL DISM ESTER LUBRIzOL - NOVEON
C12-15 ALKYL BENzOATE 11.00 Light emollient, clarity improvement Moisturization
LIPONATE NEB LIPO CHEMICALS, INC
C ISOSTEARYL ISOSTEARATE 10.00 Light ester, fragrance incorporation
SCHERCEMOL 1818 ESTER LUBRIzOL - NOVEON
ELDEW PS-203r 7.00 Stabilizing agent, emollient
AJINOMOTO CO. INC
FRAGRANCE 10.00 Scent CHERRY BLOSSOM FRAGRANCE / FIRMINECH
FRAGRANCE 2.00 Scent GINGER FRAGRANCE / BELL
CLEMENTINE ESSENTIAL OIL 2.00 Scent CLEMENTINE CO2 ESSENTIAL OIL
100.0
PrOCEDurE:1 Heat part A to 115°C, mix until fully dissolved, cool to 85°C and add to the
heated to 85°C part B, mix thoroughly while maintaining temperature. 2 Upon cooling to 80°C, slowly add mixed part C.
3 Maintain temperature at 75°C and pour into molds, then let cool to room temperature.
TECHNICAL INFOrMATION:
Appearance Transparent fragrant gelSolidification point ~ 70°CStability > 4 months at 45, 40, 25, and 3°C
37
AC
AC
-BB-08ASC
21-
43-1
“Natural” Skin Care § CreamAn Oil in Water emulsion for a night cream concept using natural ingredients. Amisoft HS-11 P improves emulsion sta-bility while Eldew PS-203r is used as a damage prevention or damage care compound. Additionally Prodew P-DS-12 imparts good nourishing properties.
PArT INGrEDIENTS % W/W FuNCTION TrADE NAME / SuPPLIEr
A SqUALANE 5.00 Emolient
SIMMONDSIA CHINENSIS (JOJOBA) SEED OIL 5.00 Emolient
MACADAMIA TERNIFOLIA SEED OIL 5.00 Emolient
CAPRYLIC / CAPRIC TRIGLYCERIDE 5.00 Emolient TCG-M/ KOKYU ALCOHOL
KOGYO
ELDEW PS-203r 1.00 Emolient AJINOMOTO CO. INC
ISOSTEARYL HYDROxYSTEARATE 2.00 Emolient SCHERCEMOL SHS ESTER
LUBRIzOL
BUTYROSPERMUM PARKII (SHEA BUTTER) 2.00 Emolient
STEARYL ALCOHOL 3.80 Emulsion stabilizer KALCOL 8688 / KAO
COPERNICIA CFRIFERA (CARNAUBA) WAx 0.10 Viscosity modifier
GLYCERYL STEARATE 2.90 Emulsifier NIKKOL MGS-BV2
NIKKO CHEMICALS
B xANTHAN GUM 0.20 Emulsion stabilizer KELTROL CG T / CP KELCO
PROPANEDIOL 5.00 Moisturizer zEMEA PROPAEDIOL
DUPONT TATE&LYLE
BIOPRODUCTS
WATER Balance
C SUCROSE PALMITATE 0.40 Co-emulsifier SURFHOPE SE COSME
C-1615 / MITSUBISHI
KAGAKU FOODS
AMISOFT HS-11P 0.20 Co-emulsifier AJINOMOTO CO. INC
D SODIUM CITRATE 0.20 pH Adjuster
CITRIC ACID (20% AW.) q.s. pH Adjuster
E PrODEW P-DS-12 (30%) 1.67 Moisturizer AJINOMOTO CO. INC
WATER 5.0
F FRAGRANCE q.s.
100.0
PrOCEDurE:
1 Aqueous phase preparation: thoroughly disperse part B at room temperature.
2 Add part C and part D (The level of citric acid is presented as a rough guide) to part B, dissolve at 85°C.
3 Oil phase preparation: mix part A well at 85°C.
4 Add the aqueous phase to the oil phase with stirring by homogenizer at 85°C.(3000rpm/3min.)
5 Cool down to 40°C with stirring by a mechanical stirrer (50rpm).
6 Add part E and part F with stirring by a mechanical stirrer (100rpm).
7 Cool down to room temperature with stirring by a mechanical stirrer (50rpm).
TECHNICAL INFOrMATION:
pH 4.8Viscosity 15,000 ~ 25,000 mPa.s (B type, Rotor No.4, 12rpm, 30sec., 25°C)Stability 0, 25, 45°C, Cycle, for 1 month
39
ECJ-C
P-2ECJ-
CP-
2
39
PrODuCT CATEGOry
PrODuCTFOrMuLATION rEF.
APPLICATION PAGE
ANIONIC SURFACTANT
Amisoft CS-22 NSAI-zN02Transparent hair shampoo for oily hair
22
Amisoft ECS-22 SB
ASC 26-119-1 “Diverse” cleansing wipes 7
KNS-097E-4 Foaming shower cream 10
ACAC-BSB-21 Clear body wash 20
ASC 27-15-3Sulfate free “natural” shampoo
21
HAN-zN02 Transparent hand soap 24
ACAC-FSB-6 Clear facial wash gel 27
Amisoft MS-11PWT-310 Facial wash powder 8
TSIL-P-3-MS Toothpaste 9
Amisoft LS-11 PWT-310 Facial wash powder 8
Amisoft HS-11 P ECJ-CP-2 “Natural” skin care cream 38
Amilite ACS-12 KNS-097E-4 Foaming shower cream 10
Amilite GCS-12 K
CCS-112 Transparent hair shampoo 13
SKPEG-112 Facial cream cleanser 14
FC-109H Facial wash cream 15
DMS-14S-5 Foaming make up remover 16
ACAC-PNS-4 Body wash cream 17
Amilite ET-CS-12 CG-zN19 Transparent hair shampoo 23
AMPHOTERIC SURFACTANT
Amisafe AL-01DMS-14S-5 Foaming make up remover 16
NSAI-zN02Transparent hair shampoo for oily hair
22
PrODuCT CATEGOry
PrODuCTFOrMuLATION rEF.
APPLICATION PAGE
HUMECTANT
Ajidew NL-50
ASC 26-119-1 “Diverse” cleansing wipes 7
CCS-112 Transparent hair shampoo 13
ACAC-BSB-21 Clear body wash 20
ASC 27-15-3 Sulfate free “natural” shampoo 21
CG-zN19 Transparent hair shampoo 23
HAN-zN02 Transparent hand soap 24
ACAC-FSB-6 Clear facial wash gel 27
NTON-CP3 “Natural” facial skin toner 28
Ajidew zN-100
ASC 26-94-3 Facial wipes for oily skin 6
NSAI-zN02 Transparent hair shampoo for oily hair 22
CG-zN19 Transparent hair shampoo 23
HAN-zN02 Transparent hand soap 24
ASC 26-86-1B Humectant-rich anti aging toner 30
Prodew 500ASC 27-15-3 Sulfate free “natural”
shampoo 21
ASC 26-86-1B Humectant-rich anti aging toner 30
Prodew P-DS-12
NTON-CP3 “Natural” facial skin toner 28
SSPB-CP-2 Facial skin toner 29
ECJ-CP-2 “Natural” skin care cream 38
EMOLLIENTEldew PS-203 R
SSPB-CP-2 Facial skin toner 29
LGS-S1 Transparent lipstick 35
ASC 21-43-1 Solid Fragrance Clear Gel 36
ACAC-BB-08 BB balm 37
ECJ-CP-2 “Natural” skin care cream 38
Eldew SL-205 ASC 21-43-1 Solid Fragrance Clear Gel 36
FUNCTIONAL POWDER
Amihope LL
PWT-310 Facial wash powder 8
ACAC-ESH-9 Eye Shadow 34
ACAC-BB-08 BB balm 37
GELLING AGENT
GP-1
ACAC-ESH-9 Eye shadow 34
LGS-S1 Transparent lipstick 35
ASC 21-43-1 Solid Fragrance Clear Gel 36
ACAC-BB-08 BB balm 37
EB-21LGS-S1 Transparent lipstick 35
ASC 21-43-1 Solid Fragrance Clear Gel 36
Formulation Finder
Notes
Contact
DisclaimerThis information is presented in good faith and we believe that it is correct, but no warranty as to accuracy of results or fitness for particular use is given, not is freedom from patent infringement to be inferred. It is offered solely for information.Before using any Ajinomoto product, or any product mentioned in this literature: read, understand and follow the information contained in the most recent Material Safety Data Sheet.
S.A. Ajinomoto OmniChem N.V.
Industrial Research Park Fleming B-1348 Louvain-la-Neuve
Belgium
Phone : +32 10 48 32 22Fax: +32 10 45 06 93
ASD-sales-SC@aoc.ajinomoto.com
43
top related