brochure illuxtron - tl lamp motion sensor (eng)
Post on 30-Mar-2016
227 Views
Preview:
DESCRIPTION
TRANSCRIPT
TL lamp motion sensor
TL LampMotion Sensor
Technology
a HIGH-QUALITY INTELLIGENT
TL-SYSTEM at the turn of a hand
It would be fantastic if the lights would switch on automatically whenever I need them.
Handy
9% of all electricity consumed in the world is used for lighting, and of the 36 billion light fittings we use worldwide 12.2 billion are TL lights?
Did you know
Whenever I leave the house, I often wonder whether I’ve left a light on anywhere.
Never forget again
TL lamp motion sensorWhat do consumers expect from TL lighting?
Energy-efficient lighting, that would be fantastic!
Environment
I find replacing my present TL fittings by new ones much too expensive.
Sustainable
Apart from that, I’m not the technical type and don’t feel like drilling holes. What a hassle.
Simple installation
Is there not a clever, quick and simple solution with which I can enjoy all the benefits with my present TL lighting?
The solution
Garages, carports, cellars, storage rooms, kitchens, offices etc.
For use in
The intelligent Illuxtron® TL lamp motion sensor has it all
No cables, no holes to drill. Simply click onto your existing TL lighting installation. So easy, anyone can do it.
Easy to install
The Illuxtron® TL lamp motion sensor detects movement & heat and switches lights on/off automatically.
Maximum user-friendliness
TL lamp motion sensor
With the Illuxtron® TL lamp motion sensor, the light goes on only when you are in the room.
Saves energy
The intelligent Illuxtron® TL lamp motion sensor has it all
For use in open fittings (without cover or louvre).
Switches lights on automatically. Switches them off after 2 minutes if no movement is detected.
The sensor detects movement and sends a signal to the electronic starter, which switches the light on or off.
TL lamp motion sensorHow does the Illuxtron® TL lamp motion sensor work?
The 2-pin plug in the starter holder of TLD (T8)lights is activated by the sensor to switch lights on and off.
Works on TLD (T8) lights of all brands – 36-58W, 220-240V~, simple applications.
Sensor can be placed to catch signals in an angle of up to 180°:• optimum range: 7 x 7 m if installed
at a height of 3.5 m. • optimum precision if installed lower.
Motion and heat sensor to be clicked onto TL tubes (one sensor per tube).
How to install the Illuxtron® TL lamp motion sensor
Switch the light off.
OFF OFF
ON
"CLICK"
"CLICK"
> 10 cm
ON"CLICK"
> 10 cm
> 10 cm
OFF
o�
onOFF OFF
ON
"CLICK"
"CLICK"
> 10 cm
ON"CLICK"
> 10 cm
> 10 cm
OFF
o�
on
Remove the old starter (and the tube too if necessary to get at the starter).
Turn the 2-pin plug into the starter holder (and replace the tube).
Click Illuxtron® TL lamp motion sensor firmly onto the tube at least 10 cm from the end of the tube.
Click the cable clamp firmly onto the tube.
OFF OFF
ON
"CLICK"
"CLICK"
> 10 cm
ON"CLICK"
> 10 cm
> 10 cm
OFF
o�
onOFF OFF
ON
"CLICK"
"CLICK"
> 10 cm
ON"CLICK"
> 10 cm
> 10 cm
OFF
o�
on
Switch the light on again. From now on, the Illuxtron® TL lamp motion sensor will switch the light on/off automatically.
OFF OFF
ON
"CLICK"
"CLICK"
> 10 cm
ON"CLICK"
> 10 cm
> 10 cm
OFF
o�
onOFF OFF
ON
"CLICK"
"CLICK"
> 10 cm
ON"CLICK"
> 10 cm
> 10 cm
OFF
o�
on
1
2
3
4
5
6
TL lamp motion sensorHow to install the Illuxtron® TL lamp motion sensor
The simple way to keep your energy bill under control while operating your TL lighting at the same time.
TL lamp motion sensor
Color: WhiteSystem type: SingleInput voltage: 220-240V~Wattage: 36-58WSafety cut-off: ± 5 sec
Product range
Automatic cut-off*: 2 minutesOperating temperature: -15°C to +55°CStart-up time: ± 3 secPackage: 1 pieceArticle number: 906203WH1102
* After last detection moment
TL lamp motion sensor
8m6m
6m4m
Height 3,5m2,5mHeight
Detection area
TL lamp motion sensor
61-9001-03 091211
ECOsolution
9w 7w
GU10 12V50w 50w
annual
LCT CTtechnology technology
TEconnectivity
SAVING €450
ECO solutionThis vignette shows that you have chosen an environmentally friendly lighting product.
The vision of Illuxtron®The Illuxtron® team of professionals is working hard on trendsetting innovations: remote control, wireless operating panels, integration of other functionalities needed etc.
How can I order Illuxtron® products?Illuxtron® products are available from accredited electrical wholesalers and/or lighting wholesalers.Stocks are held centrally in the Netherlands, so wholesalers are assured of quick delivery.
How can I register as a wholesaler?You can register via info@illuxtron.eu. Our enthusiastic team will then contact you as soon as possible.
Nieuwe Diep 40 4465 AB Goes,The Netherlands
+31 (0) 113 769037info@illuxtron.euwww.illuxtron.eu
top related