diaper machine
Post on 07-Apr-2018
218 Views
Preview:
TRANSCRIPT
-
8/6/2019 Diaper Machine
1/3
1
Introduction of Sanitary Napkin MachineZ.Y.G-960Type Serials Production Lines Sanitary Napkin with Wing
We design and make the internationally advanced Z.Y.G-960Type Serials
Sanitary Napkin with Wing Production Lines based on the advanced
technologies of the same kind products.
Main features and Functions
1.The grinder is equiped with saw tooth teeth , which feed the fluff pulp mat
steadily ,evenly from the feeding cylinder ,when it has enough supply , the
mill can stop working to save electricity.
2.The forming aluminium alloy mold made with New technologies control the mat by ration accuracy, evenly, it forms the mat
accuracy.
3.Double wing adhesive strip ,use the rolling adhesive system of up to day design (double faced adhesive can also be used) and
cutter system, which can reduce the cost of the products.
4.In Z.Y.G-960Type production line, the single forming blade ,single embossing die can play in most efficient, which can
reduce the fault rate of the equipment , and can be easily maintained, the blade can be easily sharpped. Commission and
adjustment can be operated conveniently, simply .5.Butterfly shape cutting system. We have imported advanced butterfly shape cutter processing equipment. The cutter material
is made from tungsten steel, and with the hot treatment quench of the latest technology, which can make the cutter longer
6.Drive system . We use vari-speed drive, phase adjustable motor-driven
differential mechanism, steady running, low noise, which can adjust the
running speed of the main motor and the embossing, the position of the
cutting.
The specifications and main parameters :
1) The designed operation speed : 200pads/minute
2) Normal ,steady operation speed: 100-150pads/minute
3) Power: 380V 50HZ
4)The power capacity of the whole production line: 29KW
5)The size of the product:
Long : 230mm-260mm
Width: 150mm-155mm
Guide seepage groove shape
6)the size of the equipment : long:10.5M x width:1.5M x hight:2.4M
7. The weight of the equipment: about 4.5 MT
EW99-A Winged Sanitary Napkin Line(super thin)
Main component parts of the equipment
1.Crushing system
a) Paper pulp table b) Crushing machine c)Fluff pulp storage
2. Production system
a) strong absorbent powder spreading device b) Model shaping device
c)Pressing roller device d) Leading trough device e)heat sealed side device
f)Timer equipment g)Release paper cutting device h)a set of cutting knives
3. Glue Spray System
Using Swiss or Taiwan made adhesive machine with one or two spiral
adhesive-spray gun, one or two adhesive scraping gun(bottom and wing adhesive)
4.Independent package system
-
8/6/2019 Diaper Machine
2/3
2
a)Tri-folded unit b)Package part c)product arrange device
The package has vacuum effect.
5.The whole electrical equipment system
The Technology Process of Production
Crushing fluff pulp-add strong absorbent powder-model shaping -put non-woven fabric on the bottom- put P.E.film on the
top-spray glue-heat sealed sides-pree leading trough - put release paper on the top(spray bottm and winged adhesive)-cut and
shape prducts-tri-folded vacuum package- output product in order9-A Winged Sanitary Napkin Line(super thin)
Z.Y.G998 SERIALS For Straight Sanitary Napkin and straight Diaper pad
Machinery Structure
Pulp feeding frame: use the electrically controlled lifter, the feeding is easily operated by one people Pulp grinder: use the
advanced grinding system with the reject fibre collecting device,
which can reduce the production cost Pad wrapping system: use the
pliable but strong wrapping and forming device made from the
stainless steel with special specification and designs. Hot melt
adhesive rolling system: use the special applying adhesive device,
which is provided to apply pressure sensitive adhesive lines to the
silicon release paper and is operated and maintained easily andsimply . Pad conveyor: Convey the pads in 2.5M row, which is
convenient for packing inspection drive system: use the most solid
spiral gear and cylinda gear of different specification to match with 1:20 vary-speed gear shift allowing for reduction of the pulp
mat to the proper thickness at the desired weight.
Z. Y. G --980 Small Size Panty Shield Napkin All Auto-control Production line
The specifications and the main parameter:
1) production speed: 150pcs/minute (including individual packing)
250pcs/minute(without individual packing)
2. Power: 380V 50HZ
Power Capacity of the whole line :9KW
The size of the equipment: (length X width X height): 4.7 X 1 M X 2.2M
The Weight: 2.2 MT
BABY DIAPERS MACHINE
DESCRIPTION
THIS MACHINE CONSISTS OF A CONTINUOS OPERATION IN WHICH THE FILLER PAPER IS GROUNDED BY
TWO ROLLER GEAR MILLS TO PRODUCE FLUFFED PULP WHICH IS THEN SUPPORTED BY A TISSUE PAPER. ASUPER ABSORBENT POWDER IS APPLIED TO THE PULP TO COMPLEMENT THE PLUFF FOR ABSORBENCY.
NEXT A NON WOVEN COVER IS APPLIED, ALONG WITH A LOW DENSITY POLYPROPYLENE BACKING.
ADHESIVE IS APPLIED TO BOND THE MATERIALS WITH THE FILLER (CONFINED TO A DESIGNATED
ABSORBENCY AREA OF THE DIAPER). ELASTIC IS APPLIED TO PROVIDE A CONTOURED FIT. THE DIAPER IS
CUT TO THE PROPER DIMENSION, FASTENER AND RELEASE TAPES ARE ATTACHED AT DESIGNATED POINTS.
FINALLY THE ASSEMBLED DIAPER IS FOLDED. AND STACKED AUTOMATICALLY IN BUNDLES, AND FINALLY
READY TO BE PACKED IN BAGS OR CORRUGATED BOXES.
-
8/6/2019 Diaper Machine
3/3
3
COMPONENTS:
A. TWO ROLLER GEAR MILLS FOR GRINDING THE CELLULOSE PAPER
WITH A WIDTH UP TO 500 MM. MADE OUT OF STEEL. WITH A PULP
FEEDER OPERATED BY A VARIABLE SPEED MOTOR.
B. DIAPER FORMING UNIT WITH DOUBLE PULP NUCLEUS, SUPER
-ABSORBENTPOWDER APPLICATOR.
C. ANATOMIC CUTTING GROUP FOR THE PULP
D. EMBOSSING GROUP FOR A BETTER FIXATION OF THE PULP AND
ADHESIVE APPLICATOR TO AVOID THE MOVEMENT OF THE DIAPER NUCLEUS.
E. GROUP FOR THE FIXATION FOR THE POLYETHYLENE AND THE NONWOVEN.
F. ELASTIC AND TAPES APPLICATOR.
G. FINAL ANATOMIC DIAPER CUTTING GROUP.
H. PLEATING, PRESSING AND FINAL CUTTING GROUP
I. TAKE OUT AND STACKING GROUP.
J. DIAPER PACKING TABLE
- THE PRODUCTION CAPACITY IS ABOUT 60,000 DIAPERS IN 8 HOURS.
- THE MAIN MOTOR OF THE MACHINE IS A VARIABLE SPEED OF 11.5 kW.
- THE TOTAL POWER INSTALLED IS 60 kW.- THE USAGE OF COMPRESS AIR IS APPROX. 40 N/m3 HOUR AT A PRESSURE FROM 6-8 BARS.
RAW MATERIALS:
- CELLULOSE PULP ROLLS OF 500 MM. WIDE (25,4 CM) AND WITH A MAXIMUM DIAMETER OF 100 CM.
-TISSUE PAPER ROLLS OF 27 CM. WIDE AND A MAXIMUM DIAMETER
OF 80 CM.
- NON WOVEN ROLLS 33 CM. WIDE AND A DIAMETER
OF 80 CM
MAXIMUM.
- POLYETHYLENE ROLLS 33 CM WIDE AND A DIAMETER OF 80 CM
MAXIMUM.
- SIDE FASTENERS.
- ELASTIC BAND.
- ADHESIVE FOR THE SEALING AND THE ELASTICS. (under installation)
- THIS MACHINE CAN BE ADAPTED TO PRODUCE SEVERAL SIZES: SMALL, MEDIUM, AND LARGE.
SMALL = 400 MM LENGTH X 330 MM WIDTH
MEDIUM = 440 MM LENGTH X 330 MM WIDTH
LARGE = 480 MM LENGTH X 360 MM WIDTH (straight napkin)
Product Samples:
Super thin Wing Straight Napkin Pampers Straight diaper pad
top related