e n vy 17 35w specification

Post on 19-Aug-2015

9 Views

Category:

Healthcare

2 Downloads

Preview:

Click to see full reader

TRANSCRIPT

Parameter:

Size:78.5X50.5X22.5mm

Net Weight:107g

5 colors available

Thread: 510 thread

Capacity: 2100 mAh

Adjustable from 2W to 35W 1.0-8.5 V

atomizer resistance range: 0.4ohm - 4.0ohm

Standard configuration :1x eNVy 171xUSB Cable 1xManual 1xeGo Thread Connector

Automatic Voltage/Power Adjusting :Press “+” button or “-”button for two seconds and then loose the button , the system will automatically increase or decrease voltage and power , default unit is 0.1V/0.1W , if need to speed it , just click the +button or - button one more time , changing unit transferred into 1V/1W If need to stop adjusting voltage and power , just click any button on the device .

How to charge :Plug USB Cable into the bottom of battery charging port to charge, the battery icon will keep flashing when charging and stop flashing when fully charged; Pull out the USB charger and the battery icon are off.

Character of eNVy 17Automatic Protection: press the fire button longer than 10 seconds, output shut up automatically, LED will show ’Over 10s’;Atomizer Short-cut Protection: when atomizer short-circuit occurs or without atomizer on it, the OLED screen willshow ‘No Atomizer’;

Low-resistance Protection: When resistance lower than 0.45ohm or higher than 4.0ohm, screen reflect ‘NoAtomizer’;Low Power Alert: When Battery’s power lowerthan 5%, the power symbol will flash (Please rechargingpromptly); Low-Voltage Protection: When battery voltage lower thanthe operating voltage, battery will not work and show‘Volt Low’ on OLED screen.

Precautions:*Do not leave in damp conditions or high temperatures, it may get damaged.* Keep water away (If water goes inside by accident, stop using it in case of short circuit ) *Do NOT use when charging*Do NOT attempt to personally disassemble the built-in precision circuit, disassembling the batteries can cause it scrapped.

USB Cable Charge

Computer

Wall Adapter

Operation guidance:Turn on/off: Click the fire button five times on end to turnon and turn offWorking: After connecting atomizer,press the fire buttonwhile device is on ,then system begin working and timing.Loosen the button , device stop working .If press firebutton on end over 10 seconds , it will automaticallypower off and display "Over 10 S" on the screen

VV/VW mode conversion: Click the fire button three timeson end when device is on Manual Voltage/Power Adjusting :Click + button toincrease or - button to decrease the voltage and power , each click was by 1v/1w

the plus direction button

the fire button

Atomizer Connector

the minusdirection button

the OLED screen

www.athenaecig.com

eNVy 17

eNVy 17

50.5mm 78.5mm

22.5

mm

eNVy 17 is all-in-one box mod,designed with changeable17mm atomizer on it, its compact size and delicate bodymake it confortable to hold

top related