final presentation slides - 2nd rotation

Justin SlyCo-op Presentation 2nd Rotation: 24 Applications

Introduction / OverviewHydraulic Valve Custom Option (Product Development)

RCI - CT14 Insourcing (Manufacturing Support)

Lower Boom Crotch Support Brackets (New Product Creation)

ANSI Standard Changes (Product Improvement)

Work Instructions (Processing an In-Plant Revision)

Hydraulic Valve Custom Option

Customer wanted to control the platform tilt from the lower controls- This requires an additional hydraulic valve, but where/how to mount?

Hydraulic Valve Custom Option

SolidWorks Model

SolidWorks Drawing

Installation Drawing

RCI – CT14 Insourcing

The Creedmoor team wanted to insource the TDA58’s track, the CT14, to save time and money.

Contact

Separate parts into make / buy

Give all parts an Altec part number

Create prints for all piece parts and weldments

Create sub assemblies and top level assembly

Dozens of piece parts, several weldments and assembliesTop Level Assembly

RCI – CT14 Insourcing

Lower Boom Crotch Support Gussets Customer requested a custom truck that replaced the usual “A frame” outriggers with

the modified “H frame” outriggers Since the modified outriggers are now the primary outriggers, the lower boom

crotch support would needed to be mounted. The lower boom crotch support needed custom gussets to ensure they would

stay in place

Lower Boom Crotch Support Gussets

Flat Pattern Drawing

Left Gusset Right GussetBoth

Lower Boom Crotch Support Gussets

ANSI Standard Changes ANSI (American National Standards Institute) now requires the primary

section of the lower control valve to change to a spring center section. Created valve assemblies to take off the old valve and put on the

new. Changed over 1,000 configure BOM numbers to reflect the new

ANSI standard.

ANSI Standard Changes

Altec Run FormMicrosoft Excel

Organizer

Work Instructions Created step-by-step instructions that explained how to process an in-plant

revision for the 27 Applications department

Work Instructions

Summary

Likes:Freedom of Design / Seeing Final ResultsPeople / Respect / Colleague Relationships

Dislikes:Not as hands-on as I would like

What I Learned / Improvements:

SolidWorksAUTOCADManufacturing/Design Process

Questions