final presentation slides - 2nd rotation
TRANSCRIPT
Justin SlyCo-op Presentation 2nd Rotation: 24 Applications
Introduction / OverviewHydraulic Valve Custom Option (Product Development)
RCI - CT14 Insourcing (Manufacturing Support)
Lower Boom Crotch Support Brackets (New Product Creation)
ANSI Standard Changes (Product Improvement)
Work Instructions (Processing an In-Plant Revision)
Hydraulic Valve Custom Option
Customer wanted to control the platform tilt from the lower controls- This requires an additional hydraulic valve, but where/how to mount?
Hydraulic Valve Custom Option
SolidWorks Model
SolidWorks Drawing
Installation Drawing
RCI – CT14 Insourcing
The Creedmoor team wanted to insource the TDA58’s track, the CT14, to save time and money.
Contact
Separate parts into make / buy
Give all parts an Altec part number
Create prints for all piece parts and weldments
Create sub assemblies and top level assembly
Dozens of piece parts, several weldments and assembliesTop Level Assembly
RCI – CT14 Insourcing
Lower Boom Crotch Support Gussets Customer requested a custom truck that replaced the usual “A frame” outriggers with
the modified “H frame” outriggers Since the modified outriggers are now the primary outriggers, the lower boom
crotch support would needed to be mounted. The lower boom crotch support needed custom gussets to ensure they would
stay in place
Lower Boom Crotch Support Gussets
Flat Pattern Drawing
Left Gusset Right GussetBoth
Lower Boom Crotch Support Gussets
ANSI Standard Changes ANSI (American National Standards Institute) now requires the primary
section of the lower control valve to change to a spring center section. Created valve assemblies to take off the old valve and put on the
new. Changed over 1,000 configure BOM numbers to reflect the new
ANSI standard.
ANSI Standard Changes
Altec Run FormMicrosoft Excel
Organizer
Work Instructions Created step-by-step instructions that explained how to process an in-plant
revision for the 27 Applications department
Work Instructions
Summary
Likes:Freedom of Design / Seeing Final ResultsPeople / Respect / Colleague Relationships
Dislikes:Not as hands-on as I would like
What I Learned / Improvements:
SolidWorksAUTOCADManufacturing/Design Process
Questions