genexpert system setup instructions
Post on 21-Feb-2022
29 Views
Preview:
TRANSCRIPT
A better way.301-8315, Rev. A October, 2017 © 2017 Cepheid 1 In Vitro Diagnostic Medical Device
GeneXpert® System Setup Instructions
Turn the power switch of the GeneXpert instrument to the ON position: the blue light on the front panel will light up. 1
2
3
4
Turn the computer ON.
Click on the Cepheid-Admin icon.
User-Account: Cepheid-AdminPassword: cphd
The GeneXpert® Dx software starts automatically.
Refer to Operator Manual for detailed instructions.
(If applicable) A prompt will be displayed to change the password. Follow the onscreen instructions to change the password.
Enter the old password: cphdEnter the new password: cphdConfirm password:cphd
5 In the Check Status screen, verify that all the modules are Available.
6 Confirm correct letter assignment and update if required.
A better way.301-8315, Rev. A October, 2017© 2017 Cepheid 2In Vitro Diagnostic Medical Device
GeneXpert® System Setup Instructions
Rename your GeneXpert. 8
9
10
Set up the options accordingto your needs.
To complete the installation, you must generate, sign, and save the Installation Qualification report.
Serial Number, Laboratory/Hospital Name, City, and Country
Click on Setup and then select System Configuration. 7
top related