layout & stick diagram design rules

LAYOUT DESIGN RULES & GATE LAYOUT

ByS.VARUN

M.Tech [EST]

What is a LAYOUT DESIGN?

Layout Design is a schematic of the Integrated Circuit(IC) which describes the exact placement of the components for fabrication.

Layout Design rules describe how small features can be & how closely they can be packed in a manufacturing process

Why do we need Layout Design Rules?

Industrial Design rules are generally specified in microns.

This makes migrating from one process to more advanced process difficult because not all rules scale in the same way.

In order to bring uniformity,Mead & Conway popularized lambda-based design rules based on single parameter.

Lambda,characterizes the resolution of the process & is generally the half of the minimum drawn transistor channel length.

The channel length is the distance between drain & the source which is set by a minimum width of a polysilicon wire.

Ex:-A 180 nm process has a minimum polysilicon width of 0.18microns and uses design rules with lambda=0.09.

However the designers make the scaling layout trivial.

The same layout can be moved to a new process simply by specifying the Lambda value.

The potential density advantage of micron rules is sacrificed for simplicity and easy scalability of lambda rules.

Designers often describe a process by its feature size.

Feature Size refers to the minimum transistor length,So lambda is half the feature size.

Transistor dimensions are always specified by Width/Length ratio.

Ex-In 0.6 um technology, width corresponds to 1.2um & length to 0.6um.

In digital systems, the transistors are chosen to have minimum possible length because short channel transistors are faster, smaller & consume less power.

STICK DIAGRAMS

Stick diagrams may be used to convey layer information through the use of a color code

Ex-In the case of nMOS design, green for n-diffusion, red for polysilicon, blue for metal,and black for contact areas.

A stick diagram is stick figure view of a layout.

It is useful for a)Planning Layoutb)Relative Placement of transistorsc)Assignment of signals to layersd)Connections between cellse)Cell hierarchy

LAYOUT ENCODINGS

n-Type ENHANCEMENT

n-Type DEPLETION

p-Type ENHANCEMENT

STICK DIAGRAM DESIGN RULES

1)When two or more ‘sticks’ of the same type cross or touch each other which represents electrical contact.

2)When two or more ‘sticks’ of different type cross or touch each other which represents no electrical contact.

3)When poly crosses diffusion, it represents a transistor.

4)In CMOS, a demarcation line is drawn to avoid touching of p-diffusion & n-diffusion. All p-MOS should lie on one side of the line & all n-MOS should be on the other side of the line.

DIAGRAMATIC REPRESENTATIONS

n-Type ENHANCEMENT & DEPLETION TRANSISTOR

p-Type ENHANCEMENT TRANSISTOR

CMOS INVERTER STICK & LAYOUT DIAGRAM

CMOS NAND GATE STICK DIAGRAM

CMOS NOR GATE STICK DIAGRAM

EXAMPLE EXPRESSION

THANK

YOUALL

S.VARUN