led · 2019-03-14 · the hylite led intigo lamp enhances vision for better optical acuity, and...
Post on 01-Aug-2020
2 Views
Preview:
TRANSCRIPT
Page: 1 of 2
HyLite High Performance LED Intigo Lamps - Up to 25,000 hour* Rated Design Life. Outstanding Quality of Light with Energy Savings of 87% over Incandescent, 80% over HPS / MH Lamps and 64% over CFL.
100WMH / HPSEquivalent
*Depending upon the ambient temperature of the installation location
High Performance LED Omni-Directional Lamp, 20W
LED TMIntigo
Incandescent HPS/HID CFL HyLite
150W 100W 55W 20W
87% 80% 64% Energy Savings (%)** Does not include Ballast Loss, Maintenance and Replacement Lamp Savings and Disposal Costs which can amount to additional Savings of 30~50%!
Replacewith
Reduction ofup to 87%
Energy Costs
Radiation-FreeNo Humming
IRUV
No IR/UV
No Noise
LM-80 TestedISTMT Tested
Reliability
150 LpWLM-79 Tested
High Efficacy
Safe andReliable
Warranty
5Years
Vibration andShock Resistant
Solid State
Up to 25,000 Hours
Low Power
Longer Life&
290°Illumination
Omnidirectional
For Enclosed Luminaires
Suitable
Zero Interference
No EMi / RFi
Suitable for
Damp Locations Enclosed Fixtures
Recommended Applications
Designed for Easy Installation in New Fixtures or Existing Luminaires, HyLite LED Intigo Omni-Directional Lamps are Suitable for a Wide Variety of Applications. They feature Excellent Optics for Increased Visibility, and Low Power Consumption. With Lamp Life of up to 25,000 hours, they significantly reduce Energy Consumption and Relamping Costs, consequently decreasing Maintenance and Disposal Costs.
The HyLite LED Intigo Lamp enhances Vision for better Optical Acuity, and provides Clean, Crisp Light. Suitable for Fully Enclosed Fixtures, its Compact Size makes it the ideal Replacement for CFL, MV, HID, and HPS Lamps in existing Fixtures.
• ExtremelyEfficient:HighLumenEfficacy:Upto150LpW.
• FullyEncapsulated:Shatter-proof,High-Shock&High-VibrationResistant.
• OptimalDesignforHorizontalorVerticalMountSockets
•High>84CRI.CrisplightforgreaterVisibilityandSafety.
• EasyInstallation&Retrofitting:SimplyBypassBallastandScrew-in.Runson ACDirectLineVoltage.EliminatesCompatibility,PowerLoss&Lifetime IssuesandMaintenanceCostsassociatedwithBallasts
• UniversalVoltage:100-277V,AC
•InstantStartandRestart:NoWarm-upTimerequired.
• Heat&ImpactResistant,UVProtected,Non-yellowing,OpticalGradeLens.
• ExcellentThermalManagementwithProprietary-DesignedHeatSink.
• CoolOperation:DoesnotaddtoHeatLoadwhileproducingBrilliantLight.
• SafeandReliable:IsolatedCircuitDesign.
•NoUVEmissions:DoesNotattractInsects.
•NoNoise,Electro-Magnetic(EMi)orRadioFrequencyInterference(RFi).
• Radiation/Emissions-Free:NoHarmfulIRLevels.
• IngressProtection:IP65.CompleteprotectionagainstContact,DustInfiltration and Water Splashes.
•Safe:ContainNoHazardousMaterials;RoHSCompliant:NoLead,Mercury, ToxicMetalsorArsenicGases.NoDisposalrequirements.FacilitatesLEED® points.
•EnvironmentallyFriendly:98%oftheHyLiteLEDLampisRecyclable.
• LowTotalCostofOwnershipwithShortestPaybackPeriodandHighROI.
Proprietary
& Patented
Design
Page: 2 of 2
Model Delivered Maximum InputLine Base Dimensions&Weight(each) No. Watts Lumens Install Height Current Type Diameter Height Weight
HL-IOD-20W-E26 20 2,920 <16ft.(5m) 73~154mA E26(Medium) 2.4”(60mm) 5”(127mm) 7oz.(200g)
As part of the company’s continuous product improvement program, HyLite reserves the right to change materials or modify the design of its product without notification. All Specifications subject to change without notice. All values are design and/or typical values when measured under laboratory conditions. Actual Values depend upon the ambient temperature of the installation location. Please consult factory for your specific requirements.
LED TMIntigo
NOLEAD, MERCURY, HEAVY METALS
OR TOXIC GASES
98%RECYCLABLE
Ø2.4” (60mm)
5” (1
27m
m)
• MinimumLampCompartmentDimensionsforEnclosedFixtures:6”x6”x8.5”(152mmx152mmx216mm)• ToPreventearlyLampFailure,LampshouldonlybeinstalledinOperatingEnvironmentsrangingfromaMinimumof-20°C(-4°F)toaMaximumof+45°C(113°F)• Efficacy:150LpW • CRI:>84 • BeamAngle:290º • Max.THD(%):<17% • UniversalInputVoltage• PowerFactor:>0.98 • Protection:IP65 • RatedLife:25,000Hrs.* • Warranty:5Years 100~277V,AC50/60Hz.• AmbientWorkingTemperature:-4ºF~+113ºF(-20ºC~+45ºC)• 3000°Kand5000°KStandardCCT.Productswith2400°-6500°K(CCT)areavailableas“SpecialOrders” only and with Longer Lead Times*Depending upon the ambient temperature of the installation location
Installation: HyLite LED Lampsaredesignedtoworkoff100Vto277V,AC.Ballast(ifequipped)mustbebypassedorremovedfrom the fixture before installing the lamp. EliminatingtheBallastsavesadditional costs related to Maintenance, Energy Consumption and Performance.By-passingBallastwillalsoensurethatthereisnoEMi/RFinterference.The installer MUST ensure and verify that NO Part of the installed LED Lamp should touch the Fixture Housing or Components.
Failure to follow these Instructions will result in a Damaged Product and will VOID Warranty. It could also result in an Electric Shock, or Fire.
Warning - Risk of Fire or Electric Shock
• Disable all Power to the Lamp before Inspection, Installation, or Removal. Failure to do so will create a Hazardous and Fatal Working Environment.
• SuitableforuseinDry,DampandWetLocations.LampmustbeinstalledinaccordancewithNational,State,and/orLocalElectricalCodes. Do Not Open – No User Serviceable Parts Inside.
• TopreventearlyLampfailure,LampshouldonlybeinstalledinOperatingEnvironmentsrangingfromaminimumof-20°C(-4°F)toamaximumof+45°C(113°F).
• OperateinFixturesthatprovidetheFreeFlowofAiraroundtheLampHeatSink.InEnclosedFixtures,ensuretheLamphasenoughSpaceforHeatDissipation. This will ensure Lumen Maintenance and extend its Working Life. When products are used in Outdoor Fixtures, ensure the space is Waterproof and Well Ventilated.
• NotforuseonaDimmerorRemoteControls.ThisLamp must be controlled only by either a Switch or an Electronic Photosensor. Do not use a Mechanical Sensor.
• NotintendedforusewithEmergencyExitFixturesorEmergencyExitLights.
• Caution:WhenInstallingLampsinCorrosiveEnvironments,HyLitesuggeststhataHigh-Temperature,Moisture-Resistant,SiliconeGreaseorSealantbeusedto protecttheMetal-threadedbaseoftheLEDLamptopreventWaterand/orMoistureIncursionthatcanleadtoPrematureDegradationoftheLampBaseand eventual Lamp Failure. This is especially recommended for LED Lamp installations near Saltwater bodies.
• InstallingSurge/LightningProtectorsisHighlyRecommendedandhelpstoEliminatePrematureDriverFailurecausedbySurgesandPowerFluctuations.
©2017-2019HyLiteLED,LLC.,USA Formoreinformation,pleasevisit:https://hyliteledlighting.com/ 031219
top related