micom c264 iavr - schneider electric
Post on 16-Oct-2021
51 Views
Preview:
TRANSCRIPT
MiCOM C264 iAVRAutomatic Voltage Regulator
Simplify voltage regulation for HV/MV, MV/MV and MV/LV transformers
Product at a glance MiCOM C264 iAVR is the Automatic Voltage Regulator (AVR),
dedicated to control the transformer’s On Load Tap Changer
(OLTC) in all electrical substations.
MiCOM C264 iAVR is a compact solution simplifying operation
and maintenance, contributing to energy availability, and securing
investments for long term.
The voltage regulator combines robust voltage regulation
algorithm, advanced tap changer control and monitoring facilities,
leveraging Ethernet and the IEC 61850 standard for substations.
MiCOM C264 iAVR with embedded cybersecurity is well adapted
to smooth retrofit of existing installations and to new sites.
• Compact and robust
• Pre-engineered for easy integration
in substation automation systems
(IEC 61850)
• Native asset monitoring facilities
• Embedded cybersecurity to help
to comply recommendations and
regulations
• Reduce maintenance cost
• Local support and services
schneider-electric.com | 2MV DISTRIBUTION & GRID AUTOMATION // DIGITAL SUBSTATION
MiCOM C264 iAVRAutomatic voltage regulator for transformers
Seamless modernization of critical energy infrastructures
MiCOM C264 iAVR is dedicated to equip HV and MV substations with single or multiple transformers. It is the essential device to ensure the voltage level and to optimize the assets in modern electrical networks. MiCOM C264 iAVR allows to retrofit, with minimum customer impact, existing application equipped with the previous generation of voltage regulator devices
(eg. RG6000).
Robust platform to contribute to energy availability
With its robust design, MiCOM C264 iAVR is perfectly adapted to the most demanding electrical substations, industrial sites (Oil and Gas, MMM, Water) and power generation plants.
Easy and fast system integration
The MiCOM C264 iAVR is ready for an easy integration over Ethernet networks based on IEC 61850.
Associated to protection relays and bay controllers the voltage regulator is the smart and compact voltage regulator brick for a quick installation in panels.
OLTC
Electrical Control System
MiCOM C264 iAVR
MiCOM C264 iAVR
Ethernet IEC 61850
Raise & Lower
Tap position
Voltage
VT fuse
Current
CB position
Alarms Watch Dog
Line
CB
Transformer
MiCOM C264 iAVR
Dedicated functions for transformer voltage regulation
The voltage regulator offers natively the following functions:
• Acquisition of voltage/currents, tap position, CB position, transformer status and alarms
• Manual/automatic voltage regulation for single or multiple transformers
• Long lines drop compensation (compounding)
• Local HMI with mimic diagram, measures views, control facilities, settings (voltage targets)
• Under-voltage and over-voltage detection
• Over-current detection (option)
• End tap reached security
• For transformers in parallel mode :
- Minimization of Circulating Current (MCC)
- Master/Follower
• Tap changer and transformer monitoring.
• Reverse power flow detection leading to signalisation, blocking or or pre-defined TAP position.
schneider-electric.com | 3MV DISTRIBUTION & GRID AUTOMATION // DIGITAL SUBSTATION
MiCOM C264 iAVRAutomatic voltage regulator for transformers
Voltage regulation
iAVR has a proven voltage regulator algorithm for single and multiple transformers management.
Compared to existing AVR device, the MiCOM
C264 iAVR provides a large LCD screen with
secured access, graphical data viewing, easy
to operate control facilities, open interfaces,
fast Ethernet communication to contribute to
improve security in substations.
Local tap changer control and operation from LCD display
The control of tap changer, circuit breakers, switching devices is possible using the MiCOM C264 iAVR front panel LCD. Operating actions are simple and intuitive, directly from “graphical“ HMI. Dedicated panels are designed for data monitoring and maintenance.
Tap Position Indication (TPI) interface
The MiCOM C264 iAVR acquires the tap position indication (TPI) thru digital inputs or analog inputs.
Event logging & time stamping
The voltage regulator allows the storage of
sequence of events in non-volatile memory. Up
to 2,000 events are archived with time stamping,
in chronological order. they can be retrieved
from maintenance PC.
The voltage regulator internal clock can be
synchronized by an operator, by an IRIG–B GPS
clock (via the IRIG-B input) or by an Ethernet
SNTP server.
Data monitoring and maintenance
MiCOM C264 iAVR supports the following additional functions:
• Extra measurements calculation (powers, energy, power factor, frequency)
• Fast wave form records
• Tap changer monitoring records : number of tap changes, duration on each position
• Alarms on front panel leds and on the output contacts
• Easy settings with simple web browser.
Settings
The settings are easily accessible with the web-iAVR tool, running on PCs and tablets via a simple and dedicated web browser.
The web-iAVR interface dramatically simplifies the monitoring of transformer and OLTC by offering graphical diagrams.
Cybersecurity
The iAVR is specially hardened for respecting cybersecurity
recommendations and regulations. Users are authenticated by login and
password for accessing the front panel controls.
Embedded cybersecurity fonctionalities include:
• Hardening
• User authentication IEC 62351
• Security event logs according “Syslog” format
• Secured communication with engineering and administration tools
web-iAVR sceen view
schneider-electric.com | 4MV DISTRIBUTION & GRID AUTOMATION // DIGITAL SUBSTATION
MiCOM C264 iAVRAutomatic voltage regulator for transformers
Technical Data
Design Surface mounting cases (4U, 40/60 TE),
suitable for flush mounting on 19” cabinets and panels.
Degree of protection
Front panel: IP 52
IP20 for the MiCOM C264 in 60TE case
IP50 for the MiCOM C264 in 40TE case
Power supply24 Vdc , 48-60 Vdc, 110-125 Vdc/ Vac, 220-250 Vac/ Vdc
TAP position indicatorsBCD, BCU, 1among N, Analog (0-20mA)
Digital inputsMulti voltage inputs : 24-250 Vdc
Digital outputs
Contact relays - high power: 5A permanent
Analogue inputs (option) 0-20mA
Direct AC measurements5*VT (50-150Vac) and 4*CT (1A or 5A), 0.2% accuracy
Ethernet10/100 Mb/s
RJ45 copper
Optical (multimode/Single Mode)
Ethernet Redundancy : IEC62439-3 PRP and HSR,
DHP (Dual Homing), SHP (Self Healing Protocol), RSTP
Communication protocols
IEC61850,IEC60870-5-104
IEC60870-5-101, DNP3, Modbus (options)
Operating temperature-25°C to +70°C (-13°F to +158°F)
Storage temperature
-40°C to +70°C (-40°F to +158°F)
19th February 2018 Document Number NRJED115661EN © 2018 Schneider Electric. All rights reserved. All trademarks are owned by Schneider Electric Industries SAS or its affiliated companies.
Schneider Electric Industries 35, rue Joseph Monier - CS 30323F92506 Rueil-Malmaison Cedex FRANCE
top related