pop culture ms bio
Post on 06-May-2015
1.185 Views
Preview:
DESCRIPTION
TRANSCRIPT
Introduction to using Photoshop Elements
Level: 6th to 12th grade Self esteem and awarenessPop culture iconographyArt HistoryOther curricular areas optionalLesson Plan by Noreen Strehlow
Take a full length photo near a blank wall
Save to your folder & open with Photoshop or Gimp
For Photoshop Elements, go to Image, Rotate & 90˚ Right
For Gimp go to Layer, Transform, & Rotate 90˚ CW
Resize if needed to 72 dpi
Use the Magic wand tool to select and then delete the background areas.
In Photoshop Elements
use Delete under the Edit menu
In Gimp, use Cut
under the Edit menu
Keep selecting
and removing
areas of backgroun
d
Use the Cropping tool to remove excess width from the photo.
In Gimp, the Cropping tool looks like a scalpel.
To remove a multicolor
background you will need to use the Zoom Tool
which is the magnifying glass.
Move in so you can see the
section easily.
You may adjust the size of the Eraser tool just like you would the Paintbrush tool.
Use the Eraser tool to carefully remove the background from the photo.
This can be tedious work but
an important skill to learn when working with
photos.
When you have successfully
removed the object from the
background, you will be able to
take out larger sections and not
ruin the photo.
Now you can use the Magic Wand again to select as much as possible without damaging the edge of the person’s body.
The best way to prevent having to do this much work is to have a solid color wall and floor but this was the best we could do in a pinch.
Keep going till you have as much of the background removed as possible.
Use the Eraser to clean up any little bit that is left.
You will have an image on a pure white background.
Save as YourName.psd
Under the Layer menu you will
choose Duplicate Layer.
You need to see your Layers.
In Elements you go to Window and
make sure Layers has a checkmark.
In Gimp you go to Dialogs and click
on Layers.
Now you will use the Magic Wand to select the entire white area. Hold down the Shift key to select multiple areas like the small ones inside the arms.
Go to the Select menu and choose Inverse.
In Gimp you will choose Invert
Inverse or Invert will then select the entire image within the white selection.
Choose Delete or Cut and you will end up with a clean white “cookie cutter” outline of the image.
Do this to both layers and save as Outline.psd
Go to the internet and do a search for an art masterpiece that you especially like.
Right click on the image and choose Copy.
You will paste it into the document called Outline.psd
It may be too small so you will have to go to Image and scale the artwork till it fills up the entire Outline.psd
Try not to just stretch it or it will be distorted.
The artwork layer will become the top layer and that is not where we want it.
We want to “sandwich” the image in between the two white outline layers.
So we drag the middle layer to the top so it “covers” the artwork and creates the artwork into the “shape” of the image.
Because a lot of this artwork is “white” we need to change the color of the outline before we flatten the piece.
We will choose a color not in the artwork, in this case, purple.
That color will then be poured into the top outline layer with the Paint Bucket.
Now we will choose Flatten
Image under the Layer menu.
DO NOT SAVE the Outline.psd
like this or you will ruin your nice white “cookie
cutter” file.
Because the purple is so different from the white, we can use the Magic Wand and select all the purple areas.
We don’t want the purple. We want what is inside the purple so go to Select and choose Inverse or Invert.
When you have the image inside the purple selected, Copy it.
You will have 2 files open;
The YourName.psd & Outline.psdDuplicate the layer.
Go to Image and choose Resize and then Canvas size in Photoshop Elements.
In Gimp you will go to Image and choose Canvas size directly.
You are going to add extra space to the right of the image.
Keep the image to the left.
The finished file should be
10 inches wide by about 7 inches high
Using the Magic Wand, you will remove all the
white on the duplicate layer.
Remember way back when you copied the artwork shape?
Well, it’s still in your computer’s memory on the clipboard!
You are going to paste it into the YourName.psd
Whenever you paste, it is the top layer.
Since this project wants the original image on top, we move the artwork layer by dragging it down below.
Save the YourName.psd with your newly added artwork layer
Go back to your Outline.psd
Undo the Flatten Layers
Undo the purple color
Delete the artwork layer
Repeat the process of going to the internet to get an image, sandwiching it between, flattening, selecting inverse, copying
Students can be directed to get images that correlate with specific curricular areas, but also some that reflect their personal interests in sports, etc.
This is a great project for self-esteem, art history, social studies, computer graphics, and much more depending on how students are guided.
When you allow students some personal choices, there is a greater sense of ownership.
Students have to learn a lot of technical skills in order to complete this pop culture autobiographical computer graphic poster.
Adjust the layers for spacing
Flatten the piece for printing or posting to a blog.
Flatten the layers and save as YourName.jpg
Your students now have just about all the skills they need to do anything with photos!
top related