protecto triple guard · 2020. 6. 15. · triple guard energy & insect sill sealer™ once the...

ProtectoTRIPLE GUARD

Energy & Insect Sill Sealer™

NEWSUPER STICKUPPER FLAP

KEEP

S BUGS OUT

AND ENERGY IN

• A self-adhered membrane with rubberized asphalt adhesive with a layer of3/8"closedcellfoamandtwoflapsdesignedtoadhereuponthesheathing and down on the foundation • FormsaT-bonegasket • Patentedtechnologyprovidesuniquedesigntocompletelysealthebuilding’s foundation perimeter •Foamlayeris50%thickerthanlooselaidsillseal

• Fillsthegapscausedbyshrinkingconcreteandpressuretreatedsills • Helpsreduceenergylossoverthelifeofthestructure • Helpseliminateair,moisture,insectandrodentinfiltrationbetweenthe sill plate and the foundation • Stickstothefoundationorslabevenonwindydays • Designedfortheenergyconsciousbuilder •SuperStickTechnology™adhesiveprovidesanaggressivebondtothe sheathing

•Noextratoolsneeded,applicationcanbedonewithautilityknifeandJroller •Exceedsbuildingcodes

•Adherestoconcrete,block,wood,metal,vinyl,brickandfoam surfaces •Willnotrotordeterioratewithage •Sixweekexposurerating

10 Year Limited Warranty

PREPARATION:Surfaceshallbeclean,dryandfreeofanyforeignmaterials.Thesurfaceshallbefreeofgaps,sharpedgesandprotrusions.

*Ifsurfacecannotbecleanedtoalikenewsurfaceorisdamporbelow40°F(4ºC),primershouldbeusedpriortotheapplicationofthemembrane.

APPLICATION:•Areastobesealedmustbecleananddry.Knockoffandremoveanyroughorjaggededges.Asyourollout

Triple Guard, peel off the release liner from the bottom of the Triple Guard and place the exposed adhesive sidedownontopofthefoundation.Bringthebottom11/2"flapoverthefaceofthefoundationwallwhilepressingorrollingtheadhesiveinplace.ThefoampartoftheTriple Guardshouldbeplacedflushwiththeoutsideperimeterofthefoundation.•Rollingorpressing theadhesivebottomofTriple Guard isessential toachieveadequateadhesionof theproducttothefoundation.Laytopflapbackoutofthewayofthesillplateandproceedtosetyourframedwall.

TGSS-210(6-20)

Protecto Wrap Company1955S.CherokeeStreet•Denver,CO80223(800)759-9727•www.ProtectoWrap.com

ProtectoTRIPLE GUARD

Energy & Insect Sill Sealer™

Oncetheskirtboard/sheathingisinplaceontheexterioroftheframing,peelthereleasepaperoffofthetopflapofTriple Guard and press or roll adhesive onto theskirtboard/sheathing.Theaggressiveadhesiveontheupperflapprovidesacontinuousbondtothesheathing.•Shouldyouhavere-baroranchorboltscomingoutofthefoundation,simplymakean“X”cutinthebackof Triple Guard and slide over the protrusion pressingfirmlyinplace.Forhurricanestraps,simplyslittheareabetweenthe3/8"foamandthetopflapoftheTriple Guardandslideoverthestrap.•Should the top flap ofTriple Guard be damaged during construction an additional layer of the Super Stick building tape can be applied to seal the Triple Guardtothesheathing.Buttjointscanbesealedwitha4"widepieceofProtectoWrapSuperStickbuildingtape.•UseUniversalWaterBasedPrimeronICF.INSTALLATION BELOW 40°:•KeepTriple Guard inawarmheatedspaceabove50ºFbeforeuse.•Primethetopofthefoundationwith#100Primer* andallowprimertotackup.Donotcoverwetprimer.•PeelandsticktheTriple Guardinplace.*Note:ProtectoWrapProtecto-Tak13oz.sprayadhesivemaybeusedinplaceof#100Primer.

This is how the competition stacks up

AVAILABLE SIZES3 1/2" and 5 1/2" x 25'

OTHER ENERGY SAVINGS PRODUCTS

Itsuniqueflangeactslikeagasket,sealingoffthesub-floorandpreventingairandmoistureinfiltrationunderthethreshold.Helpskeepthedoorframefromrackingandthesub-floorfromswellingandwarping.

Designedspecificallyforconformingandsealingoffairgapsbetweenthefloordeckandtheexteriorwallplates.The1/4"closedcellfoamformsagasket

seal beneath the exterior wall plate virtu-allyeliminatinganyairdraftsresultinginalargeamountofHVACenergysavings.

Designedspecificallyforconformingandsealingofftheairgapsbetweenthefloordeckandtheexteriorwallplates.Theuniquepeelandstickadhesivebottomwith1/4"closedcellfoamformsagasketsealbeneaththeexteriorwallplate.

PROTECTO PREMIUM ENERGY SILL SEALER®PROTECTO DUAL GUARD THRESHOLD TAPE™

PROTECTO ENERGY PLATE LINER®