solid state physics d r joshi
Post on 19-Jan-2015
4.424 Views
Preview:
DESCRIPTION
TRANSCRIPT
Introduction to
SOLID STATE PHYSICSA Random Walk
Dr. Dattu JoshiApplied Physics Department
Faculty of Tech. & Engg.The M S University of Baroda
Vadodara-390 00103/11/2011
Intro to Solid State by Dr Dattu Joshi, MSU, Vadodara
1
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara2
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara3
INTRODUCTIONINTRODUCTION
AIM OF SOLID STATE PHYSICS WHAT IS SOLID STATE PHYSICS? CONTENTS APPLICATIONS AND RESEARCH
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara4
Aim of Solid State Physics
Solid state physics (SSP) explains the properties of solid materials as found on earth.
The properties are expected to follow from Schrödinger’s eqn. for a collection of atomic nuclei and electrons interacting with electrostatic forces.
The fundamental laws governing the behaviour of solids are known and well tested.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara5
Crystalline Solids
We will deal with crystalline solids, that is solids with an atomic structure based on a regular repeated pattern.
Many important solids are crystalline.
More progress has been made in understanding the behaviour of crystalline solids than that of non-crystalline materials since the calculation are easier in crystalline materials.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara6
EP364 SOLID STATE PHYSICS INTRODUCTION
What is solid state physics?
Solid state physics, also known as condensed matter physics, is the study of the behaviour of atoms when they are placed in close proximity to one another.
In fact, condensed matter physics is a much better name, since many of the concepts relevant to solids are also applied to liquids, for example.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara7
What is the point?
Understanding the electrical properties of solids is right at the heart of modern society and technology.
The entire computer and electronics industry relies on tuning of a special class of material, the semiconductor, which lies right at the metal-insulator boundary.
Solid state physics provide a background to understand what goes on in semiconductors.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara8
Electrical resistivity of three states of solid matter
How can this be? After all, they each contain a system of atoms and especially electrons of similar density. And the plot thickens: graphite is a metal, diamond is an insulator and buckminster-fullerene is a superconductor.
They are all just carbon!
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara9
Among our aims - understand why one is a metal and one an insulator, and then the physical origin of the marked features.
Also think about thermal properties etc. etc.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara10
Solid State PhysicsCrystal Structure
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara11
Solid State PhysicsCrystal Diffraction and the Reciprocal Lattice
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara12
Solid State PhysicsImperfections in Crystals
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara13
Solid State PhysicsCrystal Bonding
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara14
Solid State PhysicsMagnetic Materials
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara15
Elastic constants and Elastic Waves Lattice Vibrations and Phonons Thermal Properties of Solids Free Electron Theory of Metals Transport Properties Band Theory of Solids Semiconductors Superconductivity Dielectrics Optical Phenomena in insulators etc.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara 16
CRYSTAL STRUCTURE
Elementary Crystallography Solid materials (crystalline, polycrystalline,
amorphous) Crystallography Crystal Lattice Crystal Structure Types of Lattices Unit Cell Directions-Planes-Miller Indices in Cubic Unit
Cell Typical Crystal Structures
(3D– 14 Bravais Lattices and the Seven Crystal System)
Elements of Symmetry
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara17
X-RAY CRYSTALLOGRAPHY
X-ray Diffraction
Bragg equation X-ray diffraction methods
Laue Method Rotating Crystal Method Powder Method
Neutron & electron diffraction
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara18
CRYSTAL STRUCTURE
Elementary CrystallographyTypical Crystal Structures
Elements Of Symmetry
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara19
Crystal Structure 20
Objectives
By the end of this section you should:
be able to identify a unit cell in a symmetrical pattern
know that there are 7 possible unit cell shapes
be able to define cubic, tetragonal, orthorhombic and hexagonal unit cell shapes
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara20
Crystal Structure 21
mattermatter
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara21
Crystal Structure
22
Gases Gases have atoms or molecules that do not
bond to one another in a range of pressure, temperature and volume.
These molecules haven’t any particular order and move freely within a container.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara22
Crystal Structure 23
Liquids and Liquid Crystals
Similar to gases, liquids haven’t any atomic/molecular order and they assume the shape of the containers.
Applying low levels of thermal energy can easily break the existing weak bonds.
Liquid crystals have mobile molecules, but a type of long range order can exist; the molecules have a permanent dipole. Applying an electric field rotates the dipole and establishes order within the collection of molecules.
+
-
+
-
+
-
+
-
+
-
+
-
+
-
03/11/2011
Intro to Solid State by Dr Dattu Joshi, MSU, Vadodara
23
Crystal Structure 24
Crytals Solids consist of atoms or molecules
executing thermal motion about an equilibrium position fixed at a point in space.
Solids can take the form of crystalline, polycrstalline, or amorphous materials.
Solids (at a given temperature, pressure, and volume) have stronger bonds between molecules and atoms than liquids.
Solids require more energy to break the bonds.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara24
Crystal Structure 25
SOLID MATERIALS
CRYSTALLINE POLYCRYSTALLINE AMORPHOUS(Non-crystalline)
Single Crystal
ELEMENTARY CRYSTALLOGRAPHYELEMENTARY CRYSTALLOGRAPHY
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara25
Crystal Structure 26
Types of Solids
Single crsytal, polycrystalline, and amorphous, are the three general types of solids.
Each type is characterized by the size of ordered region within the material.
An ordered region is a spatial volume in which atoms or molecules have a regular geometric arrangement or periodicity.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara26
Crystal Structure 27
Crystalline Solid Crystalline Solid is the solid form of a substance
in which the atoms or molecules are arranged in a definite, repeating pattern in three dimension.
Single crystals, ideally have a high degree of order, or regular geometric periodicity, throughout the entire volume of the material.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara27
Crystal Structure 28
Crystalline Solid
Single Crystal
Single Pyrite Crystal
AmorphousSolid
Single crystal has an atomic structure that repeats periodically across its whole volume. Even at infinite length scales, each atom is related to every other equivalent atom in the structure by translational symmetry
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara28
Crystal Structure 29
Polycrystalline Solid
PolycrystallinePyrite form
(Grain)
Polycrystal is a material made up of an aggregate of many small single crystals (also called crystallites or grains).
Polycrystalline material have a high degree of order over many atomic or molecular dimensions.
These ordered regions, or single crytal regions, vary in size and orientation wrt one another.
These regions are called as grains ( domain) and are separated from one another by grain boundaries. The atomic order can vary from one domain to the next.
The grains are usually 100 nm - 100 microns in diameter. Polycrystals with grains that are <100 nm in diameter are called nanocrystalline
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara29
Crystal Structure 30
Amorphous Solid Amorphous (Non-crystalline) Solid is composed of
randomly orientated atoms , ions, or molecules that do not form defined patterns or lattice structures.
Amorphous materials have order only within a few atomic or molecular dimensions.
Amorphous materials do not have any long-range order, but they have varying degrees of short-range order.
Examples to amorphous materials include amorphous silicon, plastics, and glasses.
Amorphous silicon can be used in solar cells and thin film transistors.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara30
Crystal Structure 31
Departure From Perfect Crystal
Strictly speaking, one cannot prepare a perfect crystal. For example, even the surface of a crystal is a kind of imperfection because the periodicity is interrupted there.
Another example concerns the thermal vibrations of the atoms around their equilibrium positions for any temperature T>0°K.
As a third example, actual crystal always contains some foreign atoms, i.e., impurities. These impurities spoils the perfect crystal structure.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara31
Distinction Between Crystalline and Amorphous Solids
Crystalline Solids• Have a regular arrangement
of particles• Have different physical
properties (thermal conductivity, electrical conductivity, refractive index etc.) in different directions i.e. Anisotropic
• Melting point is very sharp
Amorphous Solids• Have completely random
particle arrangement• Have physical properties same
in all directions, i.e. isotropic• Do not have sharp melting
point e.g. as the temperature of glass is gradually raised, it softens and starts flowing without any sharp change from solid state to liquid state
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara32
•The cooling curve for crystalline substance has breaks, see curve 1 in the fig., the middle of which corresponds to the process of crystallization.In the process of crystallization some energy is liberated which compensates the loss of heat and hence temperature remains constant.
Crystalline Solid
Amorphous Solid
• The cooling curve for amorphous substance is smooth, see curve 2 in the fig.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara33
Crystal Structure 34
CRYSTALLOGRAPHY
What is crystallography?
The branch of science that deals with the geometric description of crystals and their internal arrangement.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara34
Science of Crystallography
The study of the geometric form and other physical properties of crystalline solids by using X-rays, electron beams and neutron beams etc., constitute the science of crystallography.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara35
The
Crystal Structure 36
Crystallography is essential for solid state physics
Symmetry of a crystal can have a profound influence on its properties.
Any crystal structure should be specified completely, concisely and unambiguously.
Structures should be classified into different types according to the symmetries they possess.
Crystallography
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara36
Crystal Structure 37
A basic knowledge of crystallography is essential for solid state physicists; to specify any crystal structure and to classify the solids into different types
according to the symmetries they possess.
Symmetry of a crystal can have a profound influence on its properties.
We will concern in this course with solids with simple structures.
ELEMENTARY CRYSTALLOGRAPHY
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara37
Crystal Structure 38
CRYSTAL LATTICE
What is crystal (space) lattice?
In crystallography, only the geometrical properties of the crystal are of interest, therefore one replaces each atom by a geometrical point located at the equilibrium position of that atom.
Platinum Platinum surface Crystal lattice and structure of Platinum(scanning tunneling microscope)
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara38
Crystal Structure 39
An infinite array of points in space,
Each point has identical surroundings to all others.
Arrays are arranged exactly in a periodic manner.
Crystal Lattice
α
a
bCB ED
O A
y
x
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara39
Crystal Structure 40
Crystal Structure
Crystal structure can be obtained by attaching atoms, groups of atoms or molecules which are called basis (motif) to the lattice sides of the lattice point.Crystal Structure = Crystal Lattice + Basis
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara40
A two-dimensional Bravais lattice with different choices for the basis
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara41
Crystal Structure 42
E
H
O A
CB
Fb G
D
x
y
a
α
a
bCB ED
O A
y
x
b) Crystal lattice obtained by identifying all the atoms in (a)
a) Situation of atoms at the corners of regular hexagons
Basis A group of atoms which describe crystal structureA group of atoms which describe crystal structure
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara42
Crystal Structure 43
Crystal structure
Don't mix up atoms with lattice points
Lattice points are infinitesimal points in space
Lattice points do not necessarily lie at the centre of atoms
Crystal Structure = Crystal Lattice + Basis
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara43
Crystal Structure 44
Crystal Lattice
Bravais Lattice (BL) Non-Bravais Lattice (non-BL)
All atoms are of the same kind All lattice points are equivalent
Atoms can be of different kind Some lattice points are not equivalentA combination of two or more BL
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara44
Crystal Structure 45
Types Of Crystal Lattices
1) Bravais lattice is an infinite array of discrete points with an arrangement and orientation that appears exactly the same, from whichever of the points the array is viewed. Lattice is invariant under a translation.
Nb film
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara45
Crystal Structure 46
Types Of Crystal Lattices
The red side has a neighbour to its immediate left, the blue one instead has a neighbour to its right.
Red (and blue) sides are equivalent and have the same appearance
Red and blue sides are not equivalent. Same appearance can be obtained rotating blue side 180º.
2) 2) Non-Bravais LatticeNon-Bravais LatticeNot only the arrangement but also the orientation must appear exactly the same from every point in a bravais lattice.
Honeycomb
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara46
Crystal Structure 47
Translational Lattice Vectors – 2D
A space lattice is a set of points such that a translation from any point in the lattice by a vector;
Rn = n1 a + n2 b
locates an exactly equivalent point, i.e. a point with the same environment as P . This is translational symmetry. The vectors a, b are known as lattice vectors and (n1, n2) is a pair of integers whose values depend on the lattice point.
P
Point D(n1, n2) = (0,2)
Point F (n1, n2) = (0,-1)
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara47
Crystal Structure 48
The two vectors a and b form a set of lattice vectors for the lattice.
The choice of lattice vectors is not unique. Thus one could equally well take the vectors a and b’ as a lattice vectors.
Lattice Vectors – 2D
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara48
Crystal Structure 49
Lattice Vectors – 3D
An ideal three dimensional crystal is described by 3 fundamental translation vectors a, b and c. If there is a lattice point represented by the position vector r, there is then also a lattice point represented by the position vector where u, v and w are arbitrary integers.
r’ = r + u a + v b + w c (1)
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara49
Crystal Structure 50
Five Bravais Lattices in 2D
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara50
Crystal Structure 51
Unit Cell in 2D The smallest component of the crystal (group of
atoms, ions or molecules), which when stacked together with pure translational repetition reproduces the whole crystal.
S
a
b
S
S
S
S
S
S
S
S
S
S
S
S
S
S
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara51
Crystal Structure 52
Unit Cell in 2D
The smallest component of the crystal (group of atoms, ions or molecules), which when stacked together with pure translational repetition reproduces the whole crystal.
S
S
The choice of unit cell
is not unique.
a
Sb
S
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara52
Crystal Structure 53
2D Unit Cell example -(NaCl)
We define lattice points ; these are points with identical environments
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara53
Crystal Structure 54
Choice of origin is arbitrary - lattice points need not be atoms - but unit cell size should always be the same.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara54
Crystal Structure 55
This is also a unit cell - it doesn’t matter if you start from Na or Cl
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara55
Crystal Structure 56
- or if you don’t start from an atom
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara56
Crystal Structure 57
This is NOT a unit cell even though they are all the same - empty space is not allowed!
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara57
Crystal Structure 58
In 2D, this IS a unit cellIn 3D, it is NOT
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara58
Crystal Structure 59
Why can't the blue triangle
be a unit cell?
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara59
Crystal Structure 60
Unit Cell in 3D
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara60
Crystal Structure 61
Unit Cell in 3D
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara61
Crystal Structure 62
Three common Unit Cell in 3D
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara62
Crystal Structure 63
UNIT CELL
Primitive Conventional & Non-primitive
Single lattice point per cell Smallest area in 2D, orSmallest volume in 3D
More than one lattice point per cell Integral multibles of the area of primitive cell
Body centered cubic(bcc)Body centered cubic(bcc)
Conventional Conventional ≠ Primitive cell≠ Primitive cellSimple cubic(sc)Simple cubic(sc)
ConventionalConventional = Primitive cell = Primitive cell
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara63
Crystal Structure 64
The Conventional Unit Cell
A unit cell just fills space when translated through a subset of Bravais lattice vectors.
The conventional unit cell is chosen to be larger than the primitive cell, but with the full symmetry of the Bravais lattice.
The size of the conventional cell is given by the lattice constant a.03/11/2011
Intro to Solid State by Dr Dattu Joshi, MSU, Vadodara
64
Crystal Structure 65
Primitive and conventional cells of FCC
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara65
Primitive and conventional cells of BCC
Primitive Translation Vectors:
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara66
Crystal Structure 67
a
b c
Simple cubic (sc): primitive cell=conventional cell
Fractional coordinates of lattice points:000, 100, 010, 001, 110,101, 011, 111
Primitive and conventional cells
Body centered cubic (bcc): conventional primitive cell
a
b cFractional coordinates of lattice points in conventional cell: 000,100, 010, 001, 110,101, 011, 111, ½ ½ ½
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara67
Crystal Structure 68
Body centered cubic (bcc): primitive (rombohedron) conventional cell
a
bc
Fractional coordinates: 000, 100, 101, 110, 110,101, 011, 211, 200
Face centered cubic (fcc): conventional primitive cell
a
bc
Fractional coordinates: 000,100, 010, 001, 110,101, 011,111, ½ ½ 0, ½ 0 ½, 0 ½ ½ ,½1 ½ , 1 ½ ½ , ½ ½ 1
Primitive and conventional cells
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara68
Crystal Structure 69
Hexagonal close packed cell (hcp): conventional primitive cell Fractional coordinates: 100, 010, 110, 101,011, 111,000, 001
points of primitive cell
a
b
c
120
o
Primitive and conventional cells-hcp
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara69
Crystal Structure 70
The unit cell and, consequently, the entire lattice, is uniquely determined by the six lattice constants: a, b, c, α, β and γ.
Only 1/8 of each lattice point in a unit cell can actually be assigned to that cell.
Each unit cell in the figure can be associated with 8 x 1/8 = 1 lattice point.
Unit CellUnit Cell
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara70
Crystal Structure 71
A primitive unit cell is made of primitive translation vectors a1 ,a2, and a3 such that there is no cell of smaller volume that can be used as a building block for crystal structures.
A primitive unit cell will fill space by repetition of suitable crystal translation vectors. This defined by the parallelpiped a1, a2 and a3. The volume of a primitive unit cell can be found by
V = a1.(a2 x a3) (vector products)
Cubic cell volume = a3
Primitive Unit Cell and vectors
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara71
Crystal Structure 72
The primitive unit cell must have only one lattice point.
There can be different choices for lattice vectors , but the volumes of these primitive cells are all the same.
P = Primitive Unit CellNP = Non-Primitive Unit Cell
Primitive Unit Cell
1a
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara72
Crystal Structure 73
Wigner-Seitz MethodA simply way to find the
primitivecell which is called Wigner-
Seitzcell can be done as follows;
1. Choose a lattice point.2. Draw lines to connect
these lattice point to its neighbours.
3. At the mid-point and normal to these lines draw new lines.
The volume enclosed is called as a Wigner-Seitz cell.03/11/2011
Intro to Solid State by Dr Dattu Joshi, MSU, Vadodara
73
Crystal Structure 74
Wigner-Seitz Cell - 3D
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara74
Crystal Structure 75
Lattice Sites in Cubic Unit Cell
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara75
Crystal Structure 76
Crystal Directions
Fig. Shows [111] direction
We choose one lattice point on the line as an origin, say the point O. Choice of origin is completely arbitrary, since every lattice point is identical.
Then we choose the lattice vector joining O to any point on the line, say point T. This vector can be written as;
R = n1 a + n2 b + n3c
To distinguish a lattice direction from a lattice point, the triple is enclosed in square brackets [ ...] is used.[n1n2n3]
[n1n2n3] is the smallest integer of the same relative ratios.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara76
Crystal Structure 77
210
X = 1 , Y = ½ , Z = 0[1 ½ 0] [2 1 0]
X = ½ , Y = ½ , Z = 1[½ ½ 1] [1 1 2]
Examples
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara77
Crystal Structure 78
Negative directions
When we write the
direction [n1n2n3] depend on the origin, negative directions can be written as
R = n1 a + n2 b + n3c
Direction must be
smallest integers.
Y direction
(origin) O
- Y direction
X direction
- X direction
Z direction
- Z direction
][ 321 nnn
][ 321 nnn
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara78
Crystal Structure 79
X = -1 , Y = -1 , Z = 0 [110]
Examples of crystal directions
X = 1 , Y = 0 , Z = 0 [1 0 0]
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara79
Crystal Structure 80
Examples
X =-1 , Y = 1 , Z = -1/6[-1 1 -1/6] [6 6 1]
We can move vector to the origin.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara80
Crystal Structure 81
Crystal Planes Within a crystal lattice it is possible to identify sets of
equally spaced parallel planes. These are called lattice planes.
In the figure density of lattice points on each plane of a set is the same and all lattice points are contained on each set of planes.
b
a
b
a
The set of planes in 2D lattice.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara81
Crystal Structure 82
Miller Indices
Miller Indices are a symbolic vector representation for the orientation of an atomic plane in a crystal lattice and are defined as the reciprocals of the fractional intercepts which the plane makes with the crystallographic axes.
To determine Miller indices of a plane, take the following steps;
1) Determine the intercepts of the plane along each of the three crystallographic directions
2) Take the reciprocals of the intercepts
3) If fractions result, multiply each by the denominator of the smallest fraction
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara82
Crystal Structure 83
Axis X Y Z
Intercept points 1 ∞ ∞
Reciprocals 1/1 1/ ∞ 1/ ∞Smallest
Ratio 1 0 0
Miller İndices (100)
Example-1
(1,0,0)
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara83
Crystal Structure 84
Axis X Y Z
Intercept points 1 1 ∞
Reciprocals 1/1 1/ 1 1/ ∞Smallest
Ratio 1 1 0
Miller İndices (110)
Example-2
(1,0,0)
(0,1,0)
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara84
Crystal Structure 85
Axis X Y Z
Intercept points 1 1 1
Reciprocals 1/1 1/ 1 1/ 1Smallest
Ratio 1 1 1
Miller İndices (111)(1,0,0)
(0,1,0)
(0,0,1)
Example-3
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara85
Crystal Structure 86
Axis X Y Z
Intercept points 1/2 1 ∞
Reciprocals 1/(½) 1/ 1 1/ ∞Smallest
Ratio 2 1 0
Miller İndices (210)(1/2, 0, 0)
(0,1,0)
Example-4
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara86
Crystal Structure 87
Axis a b c
Intercept points 1 ∞ ½
Reciprocals 1/1 1/ ∞ 1/(½)
Smallest Ratio 1 0 2
Miller İndices (102)
Example-5
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara87
Crystal Structure 88
Example-6
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara88
Crystal Structure 89
Miller Indices
Reciprocal numbers are: 2
1 ,
2
1 ,
3
1Plane intercepts axes at cba 2 ,2 ,3
Indices of the plane (Miller): (2,3,3)
(100)
(200)
(110)(111)
(100)
Indices of the direction: [2,3,3]a3
2
2
bc
[2,3,3]
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara89
Crystal Structure 90
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara90
Crystal Structure 91
Example-7
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara91
Crystal Structure 92
Indices of a Family or Form
Sometimes when the unit cell has rotational symmetry, several nonparallel planes may be equivalent by virtue of this symmetry, in which case it is convenient to lump all these planes in the same Miller Indices, but with curly brackets.
Thus indices {h,k,l} represent all the planes equivalent to the plane (hkl) through rotational symmetry.
)111(),111(),111(),111(),111(),111(),111(),111(}111{
)001(),100(),010(),001(),010(),100(}100{
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara92
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara93
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara94
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara95
Find out which one is wrong?
Crystal Structure 96
There are only seven different shapes of unit cell which can be stacked together to completely fill all space (in 3 dimensions) without overlapping. This gives the seven crystal systems, in which all crystal structures can be classified.
Cubic Crystal System (SC, BCC,FCC) Hexagonal Crystal System (S) Triclinic Crystal System (S) Monoclinic Crystal System (S, Base-C) Orthorhombic Crystal System (S, Base-C, BC, FC) Tetragonal Crystal System (S, BC) Trigonal (Rhombohedral) Crystal System (S)
3D – 14 BRAVAIS LATTICES AND THE SEVEN CRYSTAL SYSTEM
TYPICAL CRYSTAL STRUCTURES
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara96
Crystal Structure 97
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara97
Crystal Structure 98
Coordinatıon Number
Coordinatıon Number (CN) : The Bravais lattice points closest to a given point are the nearest neighbours.
Because the Bravais lattice is periodic, all points have the same number of nearest neighbours or coordination number. It is a property of the lattice.
A simple cubic has coordination number 6; a body-centered cubic lattice, 8; and a face-centered cubic lattice,12.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara98
Atomic Packing Factor
Atomic Packing Factor (APF) is defined as the volume of atoms within the unit cell divided by the volume of the unit cell.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara99
Crystal Structure 100
1-CUBIC CRYSTAL SYSTEM
Simple Cubic has one lattice point so its primitive cell. In the unit cell on the left, the atoms at the corners are
cut because only a portion (in this case 1/8) belongs to that cell. The rest of the atom belongs to neighboring cells.
Coordinatination number of simple cubic is 6.
a- Simple Cubic (SC)
a
b c
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara100
Crystal Structure 101
a- Simple Cubic (SC)
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara101
Crystal Structure 102
Atomic Packing Factor of SC
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara102
Crystal Structure 103
b-Body Centered Cubic (BCC)
BCC has two lattice points so BCC is a non-primitive cell.
BCC has eight nearest neighbors. Each atom is in contact with its neighbors only along the body-diagonal directions.
Many metals (Fe,Li,Na..etc), including the alkalis and several transition elements choose the BCC structure.
a
b c
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara103
Crystal Structure 104
2 (0.433a)
Atomic Packing Factor of BCC
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara104
Crystal Structure 105
c- Face Centered Cubic (FCC)
There are atoms at the corners of the unit cell and at the center of each face.
Face centered cubic has 4 atoms so its non primitive cell.
Many of common metals (Cu,Ni,Pb..etc) crystallize in FCC structure.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara105
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara106
Crystal Structure 107
4 (0.353a)
FCC 0.74
Atomic Packing Factor of FCC
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara107
Crystal Structure 108
Atoms Shared Between: Each atom counts:corner 8 cells 1/8face centre 2 cells 1/2body centre 1 cell 1edge centre 2 cells 1/2
lattice type cell contentsP 1 [=8 x 1/8]I 2 [=(8 x 1/8) + (1 x 1)]F 4 [=(8 x 1/8) + (6 x 1/2)]C 2 [=(8 x 1/8) + (2 x 1/2)]
Unit cell contentsCounting the number of atoms within the unit cell
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara108
Crystal Structure 109
Example; Atomic Packing Factor
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara109
Crystal Structure 110
2 - HEXAGONAL SYSTEM
A crystal system in which three equal coplanar axes intersect at an angle of 120 , and a perpendicular to the others, is of a different length.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara110
Crystal Structure 111
2 - HEXAGONAL SYSTEM
Atoms are all same.03/11/2011
Intro to Solid State by Dr Dattu Joshi, MSU, Vadodara
111
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara112
Crystal Structure 113
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara113
Crystal Structure 114
3 - TRICLINIC 3 - TRICLINIC 4 - MONOCLINIC CRYSTAL 4 - MONOCLINIC CRYSTAL SYSTEMSYSTEM
Triclinic minerals are the least symmetrical. Their three axes are all different lengths and none of them are perpendicular to each other. These minerals are the most difficult to recognize.
Triclinic (Simple) ß 90
oa b c
Monoclinic (Simple) = = 90o, ß 90o
a b c
Monoclinic (Base Centered) = = 90o, ß 90o
a b c,
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara114
Crystal Structure 115
5 - ORTHORHOMBIC SYSTEM
Orthorhombic (Simple) = ß = = 90o
a b c
Orthorhombic (Base-centred)
= ß = = 90o
a b c
Orthorhombic (BC) = ß = = 90o
a b c
Orthorhombic (FC) = ß = = 90o
a b c
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara115
Crystal Structure 116
6 – TETRAGONAL SYSTEM
Tetragonal (P) = ß = = 90o
a = b c
Tetragonal (BC) = ß = = 90o
a = b c
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara116
Crystal Structure 117
7 - Rhombohedral (R) or Trigonal
Rhombohedral (R) or Trigonal (S) a = b = c, = ß = 90o
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara117
Crystal Structure 118
THE MOST IMPORTANT CRYSTAL STRUCTURES
Sodium Chloride Structure Na+Cl-
Cesium Chloride Structure Cs+Cl-
Hexagonal Closed-Packed Structure Diamond Structure Zinc Blende
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara118
Crystal Structure 119
1 – Sodium Chloride Structure
Sodium chloride also crystallizes in a cubic lattice, but with a different unit cell.
Sodium chloride structure consists of equal numbers of sodium and chlorine ions placed at alternate points of a simple cubic lattice.
Each ion has six of the other kind of ions as its nearest neighbours.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara119
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara120
Crystal Structure 121
Sodium Chloride Structure
If we take the NaCl unit cell and remove all the red Cl ions, we are left with only the blue Na. If we compare this with the fcc / ccp unit cell, it is clear that they are identical. Thus, the Na is in a fcc sublattice.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara121
Sodium Chloride Structure This structure can be
considered as a face-centered-cubic Bravais lattice with a basis consisting of a sodium ion at 0 and a chlorine ion at the center of the conventional cell,
LiF,NaBr,KCl,LiI,etc The lattice constants are in
the order of 4-7 angstroms.
)(2/
zyxa
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara122
Crystal Structure 123
2-Cesium Chloride Structure Cs+Cl-
Cesium chloride crystallizes in a cubic lattice. The unit cell may be depicted as shown. (Cs+ is teal, Cl- is gold).
Cesium chloride consists of equal numbers of cesium and chlorine ions, placed at the points of a body-centered cubic lattice so that each ion has eight of the other kind as its nearest neighbors.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara123
Cesium Chloride Structure Cs+Cl-
The translational symmetry of this structure is that of the simple cubic Bravais lattice, and is described as a simple cubic lattice with a basis consisting of a cesium ion at the origin 0 and a chlorine ion at the cube center
CsBr,CsI crystallize in this structure.The lattice constants are in the order of 4 angstroms.
)(2/
zyxa
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara124
8 cell
Cesium Chloride Cs+Cl-
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara125
Crystal Structure 126
3–Hexagonal Close-Packed Str.
This is another structure that is common, particularly in metals. In addition to the two layers of atoms which form the base and the upper face of the hexagon, there is also an intervening layer of atoms arranged such that each of these atoms rest over a depression between three atoms in the base.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara126
Crystal Structure 127
Bravais Lattice : Hexagonal LatticeHe, Be, Mg, Hf, Re (Group II elements)ABABAB Type of Stacking
Hexagonal Close-packed Structure
a=b a=120, c=1.633a, basis : (0,0,0) (2/3a ,1/3a,1/2c)
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara127
Crystal Structure 128
A A
AA
AA
A
AAA
AA
AAA
AAA
B B
B
B
B B
B
B
B
BB
C C C
CC
C
C
C C C
Sequence ABABAB..-hexagonal close packSequence ABCABCAB..
-face centered cubic close pack
Close pack
B
AA
AA
A
A
A
A A
B
B B
Sequence AAAA…- simple cubic
Sequence ABAB…- body centered cubic
Packing
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara128
Crystal Structure 129
4 - Diamond Structure
The diamond lattice is consist of two interpenetrating face centered bravais lattices.
There are eight atom in the structure of diamond. Each atom bonds covalently to 4 others equally spread
about atom in 3d.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara129
4 - Diamond Structure
The coordination number of diamond structure is 4.
The diamond lattice is not a Bravais lattice.
Si, Ge and C crystallizes in diamond structure.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara130
5- Zinc Blende
Zincblende has equal numbers of zinc and sulfur ions distributed on a diamond lattice so that each has four of the opposite kind as nearest neighbors. This structure is an example of a lattice with a basis, which must so described both because of the geometrical position of the ions and because two types of ions occur.
AgI,GaAs,GaSb,InAs,03/11/2011
Intro to Solid State by Dr Dattu Joshi, MSU, Vadodara
131
5- Zinc Blende
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara132
Crystal Structure 133
5- Zinc Blende
Zinc Blende is the name given to the mineral ZnS. It has a cubic close packed (face centred) array of S and the Zn(II) sit in tetrahedral (1/2 occupied) sites in the lattice.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara133
Crystal Structure 134
Each of the unit cells of the 14 Bravais lattices has one or more types of symmetry properties, such as inversion, reflection or rotation,etc.
SYMMETRY
INVERSION REFLECTION ROTATION
ELEMENTS OF SYMMETRY
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara134
Crystal Structure 135
Lattice goes into itself through Symmetry without translation
Operation Element
Inversion Point
Reflection Plane
Rotation Axis
Rotoinversion Axes
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara135
Crystal Structure 136
Inversion Center A center of symmetry: A point at the center of the
molecule.(x,y,z) --> (-x,-y,-z)
Center of inversion can only be in a molecule. It is not necessary to have an atom in the center (benzene, ethane). Tetrahedral, triangles, pentagons don't have a center of inversion symmetry. All Bravais lattices are inversion symmetric. Mo(CO)6
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara136
Crystal Structure 137
Reflection Plane
A plane in a cell such that, when a mirror reflection in this plane is performed, the cell remains invariant.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara137
Crystal Structure 138
Examples
Triclinic has no reflection plane. Monoclinic has one plane midway between and
parallel to the bases, and so forth.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara138
Crystal Structure 139
We can not find a lattice that goes into itself under other rotations
• A single molecule can have any degree of rotational symmetry, but an infinite periodic lattice – can not.
Rotation Symmetry
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara139
Crystal Structure 140
Rotation Axis
This is an axis such that, if the cell is rotated around it through some angles, the cell remains invariant.
The axis is called n-fold if the angle of rotation is 2π/n.
90°
120° 180°
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara140
Crystal Structure 141
Axis of Rotation
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara141
Crystal Structure 142
Axis of Rotation
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara142
Crystal Structure 143
Can not be combined with translational periodicity!
5-fold symmetry
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara143
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara144
Symmetry Elements for Cubic System
Axis of Symmetry present in cubic system
3-Tetrads4-triads6-diadsTotal-13 axes of symmetry
Total =13+9+1=23 elements of symmetry
Centre of symmetry
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara145
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara146
The characteristic symmetry elements in each of the seven groups are listed below
Cubic Three triads
Hexagonal One hexad (// z)
Tetragonal One tetrad (// z)
Trigonal One triad (// [111])
Orthorhombic Three perpendicular diads (// x, y and z)
Monoclinic One diad (// y)
Triclinic -
The characteristic symmetry elements in each of the seven groups are listed below
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara147
Concept Map
Crystal Structure 148
Group discussion
Kepler wondered why snowflakes have 6 corners, never 5 or 7.By considering the packing of polygons in 2 dimensions, demonstrate why pentagons and heptagons shouldn’t occur.
Empty space not allowed
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara148
Crystal Structure 149
90°
Examples
Triclinic has no axis of rotation. Monoclinic has 2-fold axis (θ= 2π/2 =π) normal to
the base.
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara149
Crystal Structure 150
03/11/2011Intro to Solid State by Dr Dattu Joshi,
MSU, Vadodara150
IMPERFECTIONS IN CRYSTALS
Lattice Defect or Imperfection
• An important feature of crystals is their regular atomic arrangement but no crystal is perfectly regular.
• Any deviation from this perfect atomic periodicity is called an imperfection or lattice defect.
• A lattice defect is a state in which the atomic arrangement in the small region (of a size of only a few lattice constants) of a crystal has departed from regularity.
Electrical properties gets affected
• The electrical resistance of the crystal is greatly affected.
• These defects scatter the conduction electrons in a metal and thus increase its electrical resistance.
• Especially in case of alloys this increase in electrical resistance is several tens of percentage.
Elastic properties get affected
• The strength of crystals: • Certain kinds of defects exist very rarely but
they decrease the strength of the crystal by a factor of several hundreds or thousands
• Such properties that are greatly affected by the defects are called defect or structure sensitive properties.
• The strength of crystals: • Certain kinds of defects exist very rarely but
they decrease the strength of the crystal by a factor of several hundreds or thousands
• Such properties that are greatly affected by the defects are called defect or structure sensitive properties.
CLASSIFICATION OF IMPERFECTIONS
There are three types of imperfections exist in general.
(A) Crystal Imperfections or atomic imperfections)
(B) Electronic Imperfections (C) Transient Imperfections
(A) Crystal Imperfections (or atomic imperfections) :
(A) Crystal Imperfections (or atomic imperfections) :
Concerned with this types of imperfections. To list them they are: (1) Thermal vibrations,
(2) Point defects,
(i) Vacancies,(ii) Interstitials,(iii) Isolated impurities.
(3) Line defects; the dislocation: Edge and Screw dislocations,
(4) Surface defects,(i) External surfaces of solids(ii) Internal surfaces; grain boundaries and other internal boundaries.
Concerned with this types of imperfections. To list them they are: (1) Thermal vibrations,
(2) Point defects,
(i) Vacancies,(ii) Interstitials,(iii) Isolated impurities.
(3) Line defects; the dislocation: Edge and Screw dislocations,
(4) Surface defects,(i) External surfaces of solids(ii) Internal surfaces; grain boundaries and other internal boundaries.
(B) Electronic Imperfections:
They are the defects in electronic structure e.g.,• (i) conduction electron• (ii) hole, which are excited thermally from filled bands or
impurity levels. These defects are responsible for important
electrical and magnetic properties,
(C) Transient Imperfections : (C) Transient Imperfections :
These defects are introduced into the crystal from external sources and are, for example
(i) Photons are bombarded on crystals(ii) Beam of charged particles like electrons,
protons, and mesons etc.(iii) Beam of neutral particles e.g., neutrons
and neutral atoms.Are bombarded on crystals.
These defects are introduced into the crystal from external sources and are, for example
(i) Photons are bombarded on crystals(ii) Beam of charged particles like electrons,
protons, and mesons etc.(iii) Beam of neutral particles e.g., neutrons
and neutral atoms.Are bombarded on crystals.
Different types of point defects in crystals
Vacancy
Point defects in ionic crystals
CRYSTALLOGRAPHIC IMPERFECTIONS:
CRYSTALLOGRAPHIC IMPERFECTIONS:
• To discuss the defects that arise due to the
departure from perfect periodicity of an atomic array in a crystal
• —the so called lattice defects. • They can then be classified according as the
periodic regularity is interrupted in zero, one, two and three dimensions.
(1) Point Defects:
• A lattice defect which spreads out very little in (zero dimension) is called a point defect.
• They are of following types:(i) Interstitial atoms(ii) Vacancy –also known as Schottky defects(iii)Impurity atom(iv) Interstitial + Vacancy = Frenkel defects
• A lattice defect which spreads out very little in (zero dimension) is called a point defect.
• They are of following types:(i) Interstitial atoms(ii) Vacancy –also known as Schottky defects(iii)Impurity atom(iv) Interstitial + Vacancy = Frenkel defects
(i) Interstitial atom:
• This is an extra atom inserted into the voids (called interstice of the lattice) between the regularly occupied sites.
• Thus such an atom does not occupy regular lattice sites.
• This extra atom may be an impurity atom or an atom of the same types as on the regular lattice sites.
• This is an extra atom inserted into the voids (called interstice of the lattice) between the regularly occupied sites.
• Thus such an atom does not occupy regular lattice sites.
• This extra atom may be an impurity atom or an atom of the same types as on the regular lattice sites.
(ii) Vacancies : (ii) Vacancies :
• These are the lattice sites from which the atoms are missing.
• Such a vacancy is also called Schottky defect. • But if a vacancy is created by transferring an
atom from a regular lattice site to an interstitial position then it is called Frenkel defect.
• In this case, therefore, - two imperfections are created—vacancy as well as an interstitial atom.
• These are the lattice sites from which the atoms are missing.
• Such a vacancy is also called Schottky defect. • But if a vacancy is created by transferring an
atom from a regular lattice site to an interstitial position then it is called Frenkel defect.
• In this case, therefore, - two imperfections are created—vacancy as well as an interstitial atom.
Point defects in elemental solids
Frenkel defects in ionic crystals
Cation and Anion vacancy
(iii) Impurity atom :
• This is a defect in which a foreign atom occupies a regular lattice site.
• Point defects• The simplest point defects are as follows: • Vacancy – missing atom at a certain crystal lattice
position;• Interstitial impurity atom – extra impurity atom in
an interstitial position;• Self-interstitial atom – extra atom in an interstitial
position;• Substitution impurity atom – impurity atom,
substituting an atom in crystal lattice;• Frenkel defect – extra self-interstitial atom,
responsible for the vacancy nearby.
• Point defects• The simplest point defects are as follows: • Vacancy – missing atom at a certain crystal lattice
position;• Interstitial impurity atom – extra impurity atom in
an interstitial position;• Self-interstitial atom – extra atom in an interstitial
position;• Substitution impurity atom – impurity atom,
substituting an atom in crystal lattice;• Frenkel defect – extra self-interstitial atom,
responsible for the vacancy nearby.
Line defectsLine defects
• Linear crystal defects are edge and screw dislocations.
• Edge dislocation is an extra half plane of atoms “inserted” into the crystal lattice.
• Due to the edge dislocations metals possess high plasticity characteristics: ductility and malleability.
• Linear crystal defects are edge and screw dislocations.
• Edge dislocation is an extra half plane of atoms “inserted” into the crystal lattice.
• Due to the edge dislocations metals possess high plasticity characteristics: ductility and malleability.
Screw Dislocation
• Screw dislocation forms when one part of crystal lattice is shifted (through shear) relative to the other crystal part. It is called screw as atomic planes form a spiral surface around the dislocation line.
• For quantitative characterization of a difference between a crystal distorted by a dislocation and the perfect crystal the Burgers vector is used.
• Screw dislocation forms when one part of crystal lattice is shifted (through shear) relative to the other crystal part. It is called screw as atomic planes form a spiral surface around the dislocation line.
• For quantitative characterization of a difference between a crystal distorted by a dislocation and the perfect crystal the Burgers vector is used.
• The dislocation density is a total length of dislocations in a unit crystal volume.
• The dislocation density of annealed metals is about 1010 - 1012 m−².
• After work hardening the dislocation density increases up to 1015-1016 m-².
• Further increase of dislocation density causes cracks formation and fracture.
• The dislocation density is a total length of dislocations in a unit crystal volume.
• The dislocation density of annealed metals is about 1010 - 1012 m−².
• After work hardening the dislocation density increases up to 1015-1016 m-².
• Further increase of dislocation density causes cracks formation and fracture.
(2) Line Defects:
• When a lattice defect is confined to a small region in one dimension, it is called a line defect. In this type of defect, called dislocation, part of the lattice undergoes a shearing strain equal to one lattice vector (called a Burgers vector).
• They are of two types :• (1) Edge dislocation : This type of
dislocation is created by a missing half plane of atoms.
• (ii) Screw dislocation : It can be thought of as created by cutting the crystal part way and shearing down one part relative to other by one atomic spacing.
• They are of two types :• (1) Edge dislocation : This type of
dislocation is created by a missing half plane of atoms.
• (ii) Screw dislocation : It can be thought of as created by cutting the crystal part way and shearing down one part relative to other by one atomic spacing.
Planar defects
• Planar defect is an imperfection in the form of a plane between uniform parts of the material. The most important planar defect is a grain boundary.
• Planar defect is an imperfection in the form of a plane between uniform parts of the material. The most important planar defect is a grain boundary.
• Formation of a boundary between two grains may be imagined as a result of rotation of crystal lattice of one of them about a specific axis. Depending on the rotation axis direction, two ideal types of a grain boundary are possible:
• Tilt boundary – rotation axis is parallel to the boundary plane;
• Twist boundary - rotation axis is perpendicular to the boundary plane:
• An actual boundary is a “mixture” of these two ideal types.
• Formation of a boundary between two grains may be imagined as a result of rotation of crystal lattice of one of them about a specific axis. Depending on the rotation axis direction, two ideal types of a grain boundary are possible:
• Tilt boundary – rotation axis is parallel to the boundary plane;
• Twist boundary - rotation axis is perpendicular to the boundary plane:
• An actual boundary is a “mixture” of these two ideal types.
• Grain boundaries are called large-angle boundaries if misorientation of two neighboring grains exceeds 10°-15°.
• Grain boundaries are called small-angle boundaries if misorientation of two neighboring grains is 5° or less.
• Tilt boundary – rotation axis is parallel to the boundary plane;
• Twist boundary - rotation axis is perpendicular to the boundary plane:
• An actual boundary is a “mixture” of these two ideal types.
• Grain boundaries are called large-angle boundaries if misorientation of two neighboring grains exceeds 10°-15°.
• Grain boundaries are called small-angle boundaries if misorientation of two neighboring grains is 5° or less.
• Tilt boundary – rotation axis is parallel to the boundary plane;
• Twist boundary - rotation axis is perpendicular to the boundary plane:
• An actual boundary is a “mixture” of these two ideal types.
• Grains, divided by small-angle boundaries are also called subgrains.
• Grain boundaries accumulate crystal lattice defects (vacancies, dislocations) and other imperfections, therefore they effect on the metallurgical processes, occurring in alloys and their properties.
• Since the mechanism of metal deformation is a motion of crystal dislocations through the lattice, grain boundaries, enriched with dislocations, play an important role in the deformation process.
• Grains, divided by small-angle boundaries are also called subgrains.
• Grain boundaries accumulate crystal lattice defects (vacancies, dislocations) and other imperfections, therefore they effect on the metallurgical processes, occurring in alloys and their properties.
• Since the mechanism of metal deformation is a motion of crystal dislocations through the lattice, grain boundaries, enriched with dislocations, play an important role in the deformation process.
• Diffusion along grain boundaries is much faster, than throughout the grains.
• Segregation of impurities in form of precipitating phases in the boundary regions causes a form of corrosion, associated with chemical attack of grain boundaries. This corrosion is called Intergranular corrosion.
• Diffusion along grain boundaries is much faster, than throughout the grains.
• Segregation of impurities in form of precipitating phases in the boundary regions causes a form of corrosion, associated with chemical attack of grain boundaries. This corrosion is called Intergranular corrosion.
(3) Plane Defects: (3) Plane Defects:
• When a lattice defect is confined to a small region only in two dimensions; it is called a plane defect.
• When line defects cluster together in a plane, they can form a plane which is described as follows :
• When a lattice defect is confined to a small region only in two dimensions; it is called a plane defect.
• When line defects cluster together in a plane, they can form a plane which is described as follows :
• (i) Lineage Boundary: • It is boundary between two adjacent perfect regions in
the same crystal that are slightly tilted with respect to each other.
• (ii) Grain boundary: • A crystal is made up of a large number of small grains
or crystallites which are single crystals, (i.e., all molecules in a crystallite are oriented in the same direction). Generally, these crystallites in. the crystal of a solid remain oriented indiscriminately in random directions unless special precautions are taken during the crystal growth. Such crystals are called polycrystalline. Grain boundary is the boundary between two crystals in a polycrystalline solid.
(iii) Stacking fault:• It is possible for ‘mistakes’ to occur in the
stacking sequence of hexagonal close packed layers. The plane separating the two incorrectly juxtaposed layers is called stacking fault.
We take the blue atoms as the base plane for what we are going to built on it, we will call it the "A - plane".
The next layer will have the center of the atoms right over the depressions of the A - plane; it could be either the B - or C - configuration. Here the pink layer is in the "B" position
If you pick the B - configuration (and whatever you pick at this stage, we can always call it the B - configuration), the third layer can either be directly over the A - plane and then is also an A - plane (shown for one atom), or in the C - configuration.
If you chose "C", you get the face centered cubic lattice (fcc)
If you chose "A"; you obtain the hexagonal close packed lattice (hcp),
The stacking sequences of the two close-packed lattices therefore are
fcc: ABCABCABCA...
hcp: ABABABA...
Trends of Research In Crystal Growth
Why to Grow and study crystals?
• Various device fabrication requires crystal and various properties are exploited for that
• Following Table gives some of the Uses of crystals
• Some devices in the table marked with an asterisk use crystals with controlled additions of impurities.
• In the complex structures, the necessary impurities can either be incorporated in a series of growth processes or can be added after growth by diffusion or by ion implantation.
• Various device fabrication requires crystal and various properties are exploited for that
• Following Table gives some of the Uses of crystals
• Some devices in the table marked with an asterisk use crystals with controlled additions of impurities.
• In the complex structures, the necessary impurities can either be incorporated in a series of growth processes or can be added after growth by diffusion or by ion implantation.
Properties exploited Device Crystal
1 Uniformity alone X-ray prismsNeutron collimators
Lithium fluoride
2 Uniformity givingreproducible mechanicalproperties and abrasionresistance
Turbine bladesGramophone styliBearingsTape-recorder heads Wire drawing dies
MetalsSapphireRubyFerrites Diamond
3 Uniformity eliminating scattering ofelectromagnetic waves
Lenses, prisms and optical windowsLasers*Microwave filters
Alkali and alkaline earth halidesYttrium aluminum garnetYttrium iron garnet
4 Uniformity reducing charged carrier scattering
Transistors*, Diodes* Thyristors *Photocells
Silicon, germanium and gallium arsenideCadmium suiphide
5 Uniformity reducing scattering of sound waves
Resonant filters Delay lines
QuartzLithium niobateZinc oxide
6 Uniformity allowingexploitation of tensor properties
Nicol prismUltrasonic transducersGramophone pick-ups
FluoriteRochelle saltLithium sulphate
CRYSTAL GROWTH METHODS
• MELT GROWTH METHODS • SOLUTION GROWTH METHODS • VAPOR PHASE GROWTH METHOD • MODIFICATION OF CRYSTAL
GROWTH METHODS
MELT GROWTH METHODS – Horizontal Boat Growth Methods
• Horizontal Gradient Freezing (HGF) method• Horizontal Bridgman (HB) method• Horizontal Zone Melting (HZM) method
– Vertical Boat Growth Methods • Vertical Bridgman (VB) method• Vertical Gradient Freezing (VGF) method• Vertical Zone Melting (VZM) method
– Pulling Methods • Czochralski (CZ) method• Liquid Encapsulated Czochralski (LEC) method• Kyropolous and Liquid Encapsulated Kyropolous (LEK) methods
– Floating Zone (FZ) Method– Other Methods
• Shaped Crystal Growth Method• Heat Exchange Method (HEM)
– Horizontal Boat Growth Methods • Horizontal Gradient Freezing (HGF) method• Horizontal Bridgman (HB) method• Horizontal Zone Melting (HZM) method
– Vertical Boat Growth Methods • Vertical Bridgman (VB) method• Vertical Gradient Freezing (VGF) method• Vertical Zone Melting (VZM) method
– Pulling Methods • Czochralski (CZ) method• Liquid Encapsulated Czochralski (LEC) method• Kyropolous and Liquid Encapsulated Kyropolous (LEK) methods
– Floating Zone (FZ) Method– Other Methods
• Shaped Crystal Growth Method• Heat Exchange Method (HEM)
SOLUTION GROWTH METHODS SOLUTION GROWTH METHODS
– Simple Solution Growth Method– Traveling Heater Method (THM)– Solute Solution Diffusion (SSD) Method– Solvent Evaporation (SE) Method– Temperature Difference Method under
Controlled Vapor Pressure (TDM-CVP)– Hydrothermal Synthesis Method
– Simple Solution Growth Method– Traveling Heater Method (THM)– Solute Solution Diffusion (SSD) Method– Solvent Evaporation (SE) Method– Temperature Difference Method under
Controlled Vapor Pressure (TDM-CVP)– Hydrothermal Synthesis Method
VAPOR PHASE GROWTH METHOD
– Direct Synthesis (DS) Method– Physical Vapor Transport (PVT) Method
• Open tube method• Closed tube method
– Chemical Vapor Transport (CVT) Method– Solid Phase Reaction (Solid State
Recrystallization)
– Direct Synthesis (DS) Method– Physical Vapor Transport (PVT) Method
• Open tube method• Closed tube method
– Chemical Vapor Transport (CVT) Method– Solid Phase Reaction (Solid State
Recrystallization)
MODIFICATION OF CRYSTAL GROWTH METHODS
–In-Situ Synthesis–Vapor Pressure Control–Magnetic Field Application–Accelerated Crucible Rotation
Technique (ACRT)
Survey of the methods of crystal growth
Growth from Approximate % growth
Melt 80
Vapour 7
Low Temperature solution 5
High Temperature Solution 5
Solid 3
Hydrothermal 2In some cases huge quantities of crystals are grown annually e.g. silicon, quartz, germanium, Rubby, and di-hydrogen phosphates of potassium and ammonium
In some cases huge quantities of crystals are grown annually e.g. silicon, quartz, germanium, Rubby, and di-hydrogen phosphates of potassium and ammonium
Classification of Growth TechniquesClassification of Growth Techniques
Growth from the pure melt
Growth from the pure melt
Growth from Solution
Growth from Solution
Single Crystals for Research PurposesCrystal Doping Agent Uses
-Al2O3, TiO2, CaF2 Transition elements Paramagnetic studies
CaWO4, etc. Rare Earths and Actinides Masers; Lasers
ZnS, CdS, Organic Crystals Cr, Mn, Cu, Ag, Tl, etc. FluorescencePhotoconductivityPhotoelectricity
Ge, Si, InSb, GaAs, SiC, PbTe, Bi2Te3
Donor or acceptor impurities
Semiconductivity, Thermoelectric, Galvanomagnetic effects
Fe3O4, MFe2O4, BaFe12O19, Y3Fe5O12
Paramagnetic substituents Magnetic studies
BeO, MgO, -Al2O3, UO2 Pure Reactor material
Al2SiO5, aluminosilicates, ZrSiO4, C, BN, WC, ThO2
ZrO2, Si3N4, etc.
Pure Refractories, abrasives, Structural materials
Alkali halides, -SiO2, CaF2, SrTiO3
Pure Optical materials
Methods of Crystal AssessmentsMethod Destructive or
Non-destructive
Information given
1 Chemical analysisSpectrographic analysis
D Composition
2 X-ray analysis N Structure (Some information on composition)
3 X-ray fluorescence spectroscopy N Composition
4 Electron diffraction N Structure, surface detail
5 Electron microscopy N Surface detail
6 Electron beam X-ray spectroscopy N Composition
7 Optical spectroscopy, IRUV N Structure and composition
8 Electron spin resonance N Purity (structure)
9 Optical examination N Imperfections, Surface detail
10 Etching, decorating N/D Perfection
11 Measurement of specialized physical properties (electrical or magnetic)
N Perfection, purity
Requirements for growth control
From theory and practice
• As a particle settles on growing crystal surface a finite time is necessary for the particle to move to an available and proper site.
• Growth rates must therefore be slow enough to allow this surface diffusion to be effective.
• The most rapid growth is thus allowed at the melting point of a material, and the growth of crystals of the same material at lower temperatures (by solution techniques) must be correspondingly slower.
• As a particle settles on growing crystal surface a finite time is necessary for the particle to move to an available and proper site.
• Growth rates must therefore be slow enough to allow this surface diffusion to be effective.
• The most rapid growth is thus allowed at the melting point of a material, and the growth of crystals of the same material at lower temperatures (by solution techniques) must be correspondingly slower.
Typical example of growing corundum (-Al2O3) crystals by different
techniquesGrowth rates for corundum
Method Temperature Linear growth rate
Hydrothermal 650°C 0.1 mm/day
Fluxed-melt 1200°C 1 mm/day
Flame fusion 2100°C 450 mm/day
Any fluctuation, irregularity or temporary halt in the growth process
is reflected in the crystal obtainedThe result may appear as
• Included material (‘ghosting’)• Variations in dislocation densities• Lattice irregularities • Inhomogeneity of composition
The result may appear as• Included material (‘ghosting’)• Variations in dislocation densities• Lattice irregularities • Inhomogeneity of composition
growth from the melt
• fast (~mm/hr) growth rate is limited by heat transfer, not by mass transfer
• allows for a large variety of techniques
• Verneuil• Bridgman-Stockbarger• Czochralski-Kyropoulos• zone melting and floating zone
• fast (~mm/hr) growth rate is limited by heat transfer, not by mass transfer
• allows for a large variety of techniques
• Verneuil• Bridgman-Stockbarger• Czochralski-Kyropoulos• zone melting and floating zone
characteristicscharacteristics
Verneuil1902, Auguste Verneuil
characteristics: no crucible contamination highly pure starting material (>99.9995%) strict control of flame temperature precise positioning of melted region
vibration
growth
The Verneuil method. :• A fine dry powder of the material
to be grown is shaken through the wire mesh and falls through the oxy-hydrogen flame in which it melts.
• A film of liquid is formed on top of the seed crystal.
• This freezes progressively as the crystal is slowly lowered (a few mm/hr).
• To maintain symmetry the seed is rotated (usually at about 10 r.p.m.)
• The art of the method is to balance the rate of powder feed and the rate of lowering to maintain a constant growth rate and diameter.
• The method is used extensively for the production of ruby crystals
• A fine dry powder of the material to be grown is shaken through the wire mesh and falls through the oxy-hydrogen flame in which it melts.
• A film of liquid is formed on top of the seed crystal.
• This freezes progressively as the crystal is slowly lowered (a few mm/hr).
• To maintain symmetry the seed is rotated (usually at about 10 r.p.m.)
• The art of the method is to balance the rate of powder feed and the rate of lowering to maintain a constant growth rate and diameter.
• The method is used extensively for the production of ruby crystals
temperature
Tmelt
Bridgman-Stockbarger
characteristics:characteristics: charge and seed are placed into the crucible no material is added or removed (conservative process) axial temperature gradient along the crucible
charge and seed are placed into the crucible no material is added or removed (conservative process) axial temperature gradient along the crucible
• As the crucible is lowered, solid forms first at the pointed tip of the crucible.
• If this tip is correctly shaped, usually only one crystal will be formed initially, and single crystal growth will generally continue if the conditions have been correctly chosen.
• The latent heat of solidification, which is evolved as the crystal grows, is removed by conduction through the crystal and the crucible.
• The principal characteristic of this method is that at least some part of the solid—liquid interface is in contact with the crucible.
• As the crucible is lowered, solid forms first at the pointed tip of the crucible.
• If this tip is correctly shaped, usually only one crystal will be formed initially, and single crystal growth will generally continue if the conditions have been correctly chosen.
• The latent heat of solidification, which is evolved as the crystal grows, is removed by conduction through the crystal and the crucible.
• The principal characteristic of this method is that at least some part of the solid—liquid interface is in contact with the crucible.
Bridgman-Stockbarger
•The shape of the crystal is defined by the container
•No radial temperature gradients are needed to control the crystal shape.
•Low thermal stresses result in low level of stress-induced dislocations.
•Crystals may be grown in sealed ampules (easy control of stoichiometry)
•Relatively low level of natural convection
•Easy control and maintenance
•The shape of the crystal is defined by the container
•No radial temperature gradients are needed to control the crystal shape.
•Low thermal stresses result in low level of stress-induced dislocations.
•Crystals may be grown in sealed ampules (easy control of stoichiometry)
•Relatively low level of natural convection
•Easy control and maintenance
AdvantagesAdvantages
•Confined growth (crucible may induce stresses during cooling)
•Difficult to observe seeding and growing processes
•Changes in natural convection as the melt is depleted
•Delicate crucible and seed preparation, sealing, etc.
•Confined growth (crucible may induce stresses during cooling)
•Difficult to observe seeding and growing processes
•Changes in natural convection as the melt is depleted
•Delicate crucible and seed preparation, sealing, etc.
Drawbacks
Bridgman-StockbargerBridgman-Stockbarger
melts with volatile constituents:III-V compounds (GaAs, lnP, GaSb)II-VI compounds (CdTe)
ternary compounds:Ga1-xlnxAs, Ga1-xlnxSb, Hg1-xCdxTe
melts with volatile constituents:III-V compounds (GaAs, lnP, GaSb)II-VI compounds (CdTe)
ternary compounds:Ga1-xlnxAs, Ga1-xlnxSb, Hg1-xCdxTe
applications
reduced nucleationreduced thermal stressesreduced evaporationprevents contact between crucible and melt
reduced nucleationreduced thermal stressesreduced evaporationprevents contact between crucible and melt
improvement example (liquid encapsulation)improvement example (liquid encapsulation)
crucible
encapsulant
melt
crystallow vapor pressuremelting temperature lower than the crystaldensity lower than the density of the meltno reaction with the melt or crucible
low vapor pressuremelting temperature lower than the crystaldensity lower than the density of the meltno reaction with the melt or crucible
encapsulant characteristicsencapsulant characteristics
B2O3
LiCl, KCl, CaCl2, NaCl
Czochralski-Kyropoulos A seed crystal mounted on a rod is dipped into the molten material. The seed crystal's rod is pulled upwards and rotated at the same time. By precisely controlling the temperature gradients, rate of pulling and speed of rotation, a single-crystal cylindrical ingot is extracted from the melt. The process may be peformed in controlled atmosphere and in inert chamber.
A seed crystal mounted on a rod is dipped into the molten material. The seed crystal's rod is pulled upwards and rotated at the same time. By precisely controlling the temperature gradients, rate of pulling and speed of rotation, a single-crystal cylindrical ingot is extracted from the melt. The process may be peformed in controlled atmosphere and in inert chamber.
Jan Czochralski (1885 - 1953)
characteristics:
charge and seed are separated at start no material is added or removed (conservative process) charge is held at temperature slightly above melting point crystal grows as atoms from the melt adhere to the seed
charge and seed are separated at start no material is added or removed (conservative process) charge is held at temperature slightly above melting point crystal grows as atoms from the melt adhere to the seed
seed
grown crystal
molten raw
material
heating elements
seed
grown crystal
molten raw material
Kyropoulos
Czochralski1918
1926
Pulling direction of seed on rod
Heater
CZOCHRALSKI
Crucible
Inert atmosphere under pressure prevents material loss and unwanted reactions
Layer of molten oxide like B2O3 prevents preferential volatilization of one component - precise stoichiometry control
Melt just above mp
Growing crystal
Crystal seed
Counterclockwise rotation of melt and crystal being pulled from melt, helps unifomity of temperature and homogeneity of crystal growth
• Molten material is held in a crucible at a temperature just above its melting point.
• Heat is abstracted through a water-cooled seed and crystallization occurs on the seed which grows down into the melt.
• Temperature control of the furnace largely determines the diameter of the growing crystal, and some adjustment of the seed position relative to the crucible may be necessary if a large volume change occurs on solidification.
• In practice the crystals are removed from the furnace for annealing, although this may be done in situ.
• Molten material is held in a crucible at a temperature just above its melting point.
• Heat is abstracted through a water-cooled seed and crystallization occurs on the seed which grows down into the melt.
• Temperature control of the furnace largely determines the diameter of the growing crystal, and some adjustment of the seed position relative to the crucible may be necessary if a large volume change occurs on solidification.
• In practice the crystals are removed from the furnace for annealing, although this may be done in situ.Kyropoulous apparatus
• The technique is mainly used for the production of large alkali halide crystals for optical use.
• Growth rates of about 1 cm/hr are obtainable with gradients of the order of 50°C/cm.
• Although optically of acceptable quality, the crystals contain numerous low-angle boundaries.
• For high- purity materials, crucible contamination is a serious problem.
• The technique is mainly used for the production of large alkali halide crystals for optical use.
• Growth rates of about 1 cm/hr are obtainable with gradients of the order of 50°C/cm.
• Although optically of acceptable quality, the crystals contain numerous low-angle boundaries.
• For high- purity materials, crucible contamination is a serious problem.
Czochralski-Kyropoulos
•Growth from free surface (stress free)•Crystal can be observed during the growth process•Forced convection easy to impose•Large crystals can be obtained•High crystalline perfection can be achieved•Good radial homogeneity
AdvantagesAdvantages
•Delicate start (seeding, necking) and sophisticated further control•Delicate mechanics (the crystal has to be rotated; Rotation of the crucible is desirable)•Cannot grow materials with high vapor pressurebatch process (axial segregation, limited productivity)
•Delicate start (seeding, necking) and sophisticated further control•Delicate mechanics (the crystal has to be rotated; Rotation of the crucible is desirable)•Cannot grow materials with high vapor pressurebatch process (axial segregation, limited productivity)
DrawbacksDrawbacks
zone meltingzone melting
ultra-pure silicon
characteristics:characteristics: only a small part of the charge is molten material is added to molten region (nonconservative process) molten zone is advanced by moving the charge or the gradient axial temperature gradient is imposed along the crucible
only a small part of the charge is molten material is added to molten region (nonconservative process) molten zone is advanced by moving the charge or the gradient axial temperature gradient is imposed along the crucible
zone melting
•Charge is purified by repeated passage of the zone (zone refining).•Crystals may be grown in sealed ampules or without containers (floating zone).•Steady-state growth possible.•Zone leveling is possible; can lead to superior axial homogeneity.•Process requires little attention (maintenance).•Simple: no need to control the shape of the crystal.•Radial temperature gradients are high.
•Charge is purified by repeated passage of the zone (zone refining).•Crystals may be grown in sealed ampules or without containers (floating zone).•Steady-state growth possible.•Zone leveling is possible; can lead to superior axial homogeneity.•Process requires little attention (maintenance).•Simple: no need to control the shape of the crystal.•Radial temperature gradients are high.
advantages
•Confined growth (except in floating zone).•Hard to observe the seeding process and the growing crystal.•Forced convection is hard to impose (except in floating zone).•In floating zone, materials with high vapor pressure can not be grown.
•Confined growth (except in floating zone).•Hard to observe the seeding process and the growing crystal.•Forced convection is hard to impose (except in floating zone).•In floating zone, materials with high vapor pressure can not be grown.
drawbacksdrawbacks
other methods (1)
melt non congruently decompose before melting have very high melting point undergo solid state phase transformation between melting point and room temperature
growth from solutions
key requirementhigh purity solvent
insoluble in the crystal
oxides with very high melting points
PbO, PbF2, B2O3, KF
very slow, borderline purity, platinum crucibles, stoichiometry hard to control
carried on at much lower temperature than melting point
typical solvents:
main advantage:
limitations:
molten salt (flux) growtha liquid reaction
medium that dissolves the reactants and
products, but do not participate in the
reaction
flux:
other methods (2)
high quality layers of III-V compounds (Ga1-xlnxAs, GaAsxP1-x) GaAs and GaSb from Ga solution
liquid phase epitaxy advantagelower temperatures
than melt growth
aqueous solution at high temperature and pressure
typical example: quartz industry
SiO2 is grown by hydrothermal growth at 2000 bars and 400°C because of α-β quartz transition at 583°C
hydrothermal growth
limitationvery slow, small crystals
or thin layers
crystal purity (1)
Solubility of possible impurity is different in crystal than melt, the ratio between respective concentrations is defined as segregation coefficient (k0)
L
S
C
Ck 0
impurity equilibrium concentration in crystal
impurity equilibrium concentration in melt
1
00
0
01
k
LS M
MCkC
As the crystal is pulled impurity concentration will change in the melt (becomes larger if segregation coefficient is <1). Impurity concentration in crystal after solidifying a weight fraction M/M0 is:
Simple laboratory techniques you can also try
• Crystal growing is an art, and there are as many variations to the basic crystal growing recipes as there are crystallographers.
• The recipes given below are ones which I have either tried or I have read about and sound reasonable.
• The techniques chosen will largely depend on the chemical properties of the compound of interest: – Is the compound air sensitive, – moisture sensitive? – Is it hygroscopic? etc. etc.
• Crystal growing is an art, and there are as many variations to the basic crystal growing recipes as there are crystallographers.
• The recipes given below are ones which I have either tried or I have read about and sound reasonable.
• The techniques chosen will largely depend on the chemical properties of the compound of interest: – Is the compound air sensitive, – moisture sensitive? – Is it hygroscopic? etc. etc.
Slow Evaporation. Slow Evaporation. The simplest way to grow crystals and works best for
compounds which are not sensitive to ambient conditions in the laboratory.
• Prepare a solution of the compound in a suitable solvent. • The solution should be saturated or nearly saturated. • Transfer the solution to a CLEAN crystal growing dish and
cover. • The covering for the container should not be air tight. • Aluminium foil with some holes poked in it works well, or
a flat piece of glass with microscope slides used as a spacer also will do the trick.
• Place the container in a quiet out of the way place and let it evaporate.
• This method works best where there is enough material to saturate at least a few milliliters of solvent.
The simplest way to grow crystals and works best for compounds which are not sensitive to ambient conditions in the laboratory.
• Prepare a solution of the compound in a suitable solvent. • The solution should be saturated or nearly saturated. • Transfer the solution to a CLEAN crystal growing dish and
cover. • The covering for the container should not be air tight. • Aluminium foil with some holes poked in it works well, or
a flat piece of glass with microscope slides used as a spacer also will do the trick.
• Place the container in a quiet out of the way place and let it evaporate.
• This method works best where there is enough material to saturate at least a few milliliters of solvent.
Slow Cooling. This is good for solute-solvent systems which are less than
moderately soluble and the solvent's boiling point is less than 100°C.
• Prepare a saturated solution of the compound where the solvent is heated to just it's boiling point or a just below it.
• Transfer the solution to a CLEAN large test tube and stopper.
• Transfer the test tube to a Dewar flask in which hot water (heated to a temperature of a couple of degrees below the solvent boiling point).
• The water level should exceed the solvent level in the test tube, but should not exceed the height of the test tube.
• Stopper the Dewar flask with a cork stopper and let the vessel sit for a week.
• A more elaborate version of this involves a thermostated oven rather than a Dewar flask.
This is good for solute-solvent systems which are less than moderately soluble and the solvent's boiling point is less than 100°C.
• Prepare a saturated solution of the compound where the solvent is heated to just it's boiling point or a just below it.
• Transfer the solution to a CLEAN large test tube and stopper.
• Transfer the test tube to a Dewar flask in which hot water (heated to a temperature of a couple of degrees below the solvent boiling point).
• The water level should exceed the solvent level in the test tube, but should not exceed the height of the test tube.
• Stopper the Dewar flask with a cork stopper and let the vessel sit for a week.
• A more elaborate version of this involves a thermostated oven rather than a Dewar flask.
Variations on Slow Evaporation and Slow Cooling
Variations on Slow Evaporation and Slow Cooling
If the above two techniques do yield suitable crystals from single solvent systems, one may expand these techniques to binary or tertiary solvent systems.
• The basic rationale for this is by varying the solvent composition one may inhibit growth of certain crystal faces and promote the growth of other faces, yielding crystals of suitable morphology and size.
• If you choose this route for growing crystals, it is absolutely necessary to record the solvent composition you use!
• If crystal growing is an art, growing crystals from binary or tertiary solvent mixtures is that much more imprecise.
• Remember reproducibility is paramount in science.
crystal purity (2)
As a consequence, floating zone method will give crystals with lower concentration of impurities having k<1 than Czochralski growth
L
xk
eS
e
ekCC 110
The effective segregation coefficient (ke):
D
ve
ekk
kk
)1( 00
0
multiple pass may be run in order to achieve the required impurity concentration
there is no contamination from crucible
crystals for DBDDBD application constraints
ββ emitters of experimental interest
IsotopeIsotopic
abundance (%)
half life (y)
48Ca 0.0035
~ 4.0
1019
76Ge 7.8
~ 1.4
1021
82Se 9.2
~ 0.9
1020
96Zr 2.8
~ 2.1
1019
100Mo 9.6
~ 8.0
1018
116Cd 7.5
~ 3.3
1019
128Te 31.7
~ 2.5
1024
130Te 34.5
~ 0.9
1021
136Xe 8.9 ?150Nd 5.6
~ 7.0
1018
i
i
i
i
i
ii
T
T
m
m
T
T
m
m
p
p
impurity allowed (g/g):
T = 1018 – 1024 yrusual Ti < 1012 yr
1210m
mi
close to detection limit of the most sensitive techniques used for quantitative elemental analysis (NAA, ICP-MS)
T
T
m
m ii
TeO2 crystal (1)
Paratellurite Tellurite
tetragonal orthorhombic-dipyramidal
greyish-white, opaque
white to yellow, subtranslucent to opaque
1960, Mexico 1842, Romania
Characteristic valueChemical Formula TeO2
Molecular Weight 159.61
Crystal Class Tetragonal
Density (g/cm3 at 20 °C) 6
Melting Point (°C) 733°CHardness (Mohs) 4Solubility in water NoneColor ClearTransmittance Range (μm) 0.33-5.0
no=2.3194
ne=2.4829Thermal Expansion (1/K at 0°C)
normal to <001> 19.5 x 10-6
parallel to <001> 6.10 x 10-6
Refractive index (λ=500nm)
relatively low melting pointdistorted rutile (TiO2) structure
anisotropy of expansion coefficient
TeO2 (paratellurite)
a = 4.8088 Åc = 7.6038 Å
short:: 1.88 Å
long:: 2.12 Å
TeO2 crystal (2)
raw material preparation
TeO2+HCl→TeCl4+H2O
TeO2
2Te+9HNO3 → Te2O3(OH)NO3+8NO2+4H2OTe2O3(OH)NO3→2 TeO2+HNO3
TeCl4+4NH4OH→Te(OH)4+4NH4ClTe(OH)4→TeO2+H2O
HNO3
TeO2
HClTeCl4
TeCl4
NH4OHTeO2
TeO2
Te
TeO2 99.999%
washing
filtering
washing
drying
TeO2 crystal (3)
seed
grown Xtal
molten TeO2
heating
Czochralski
molten TeO2
Bridgman
seed
grown Xtal
Bridgman grown crystals are more stressed than Czochralski ones annealing at about 550°C helps in removing the residual stresses
TeO2 crystal is particularly repellent to impurities most of radioactive isotopes have ionic characteristics incompatible with substitutional incorporation in TeO2
crystal growth
TeO2 crystal (4)
At At. Nb. Oxi. No. Coo. No. IonicR (Å)Stable
isot. (%)Dev. IonR
(%)
Ag 47 3 4 0.67 100.000 1.52
Au 79 3 4 0.68 100.000 3.03
Co 27 2; 2 6; 5 0.65; 0.67 100.000 -1.52; 1.52
Fe 26 2; 3 4; 6 0.64; 0.65 100.000 -3.03; -2.27
Ir 77 3 6 0.68 100.000 3.03
Mg 12 2 5 0.66 100.000 0
Mn 25 2; 2; 3 6; 4; 6 0.66; 0.67; 0.65 100.000 0; 1.52; -2.27
Mo 42 4; 5 6; 4 0.65; 0.65 75.530 -1.52; -1.52
Nb 41 4; 5 6; 6 0.68; 0.64 100.000 3.03
Pb 82 2; 4 4; 4 0.64; 0.65 98.600 -3.03; -1.52
Pd 46 2 4 0.64 100.000 -3.03
Rh 45 3 6 0.665 100.000 0.76
Ru 44 3 6 0.68 100.000 3.03
Ta 73 4; 5 6 0.68; 0.64 99.988 3.03; -3.03
Te 52 4 4 0.66 33.606 0
Ti 22 3 6 0.67 100.000 1.51
V 23 3 6 0.64 99.750 -3.03
W 74 4 6 0.66 55.440 0
Zr 40 4 5 0.66 97.200 0
Te possible substitutional ions in TeO2
NAA XRF ICP-MS(ng) (µg/g) (pg/g)
Cs 0.1 5 0.1Co 0.1 1 3Pb -- 1 10Mo 1 0.5 2Pd 1 5 0.1K 1 10 200
Ra 0.1 5 1Ta 0.1 2 0.01Th 0.1 1 0.01W 0.01 1 1U 0.01 1 0.3V 0.1 1 1Zr 10 0.5 1
Approximate Detection LimitSymbol
238U (T=4.5·109 yr) 1210T
Ti
184W (T=3·1017 yr) 410T
Ti
TeO2 crystal (5)radiopurity
main radioactive series
crucible materialactivation products
ox. No.
coo. No
ion rad. (Å)
Te 4 4 0.66Co 3 6 0.61Pa 4 6 0.90Th 4 6 0.94U 4 6 0.89
3 6 0.644 5 0.534 6 0.583 6 0.704 6 0.70
V
Pt
natural radioactivity
decay mode
energy (MeV)
T1/2
40K beta 1.311 1.277E11 y
190Pt alpha 3.249 6.5E11 y
e- capture 2.208 1.4E17 y
beta 1.037 1.4E17 y
50V
conclusion
shares of 20 000 tons, world crystals production in 1999
60%12%
10%
10%5% 3%
semiconductors scintillation crystals
optical crystals acousto-optics crystals
laser and nonlinear crystals jewlery and watch industry
tonssemiconductors 12000scintillation crystals 2400optical crystals 2000acousto-optics crystals 2000laser and nonlinear crystals 1000jewlery and watch industry 600
60%12%
10%
10%5% 3%
semiconductors scintillation crystals
optical crystals acousto-optics crystals
laser and nonlinear crystals jewlery and watch industry
ECAL-CMS: (80 tons PWO)/2000-2006
CUORE: (1 ton TeO2)/?
top related