techtalk: 3d printing

(aka 3D Printing)

Additive Manufacturing

Glenn Adamsgj@gjadams.com

(President Obama talks about 3D printing, starting at 14:54)http://www.whitehouse.gov/state-of-the-union-2013

http://namii.org/resources/logos/

http://www.putmanplanninganddesign.com/FabLab.html

http://www.clubpenguinsaraapril.com

Educated Consumer

Conversational

Ready to Hack

Ready To Innovate

http://wordlesstech.com/2013/03/19/nanoscale-3d-printed-microstructures/

equal to the diameter of a human hair

http://3dprintingindustry.com

http://www.esa.int/Highlights/Lunar_3D_printing

http://inhabitat.com/the-solar-powered-sinter-3d-printer-turns-desert-sand-into-glass/

http://www.contourcrafting.org/

Type Technologies Materials

Extrusion Fused deposition modeling (FDM) Thermoplastics (e.g. PLA, ABS), HDPE, eutectic metals, edible materials

Wire Electron Beam Freeform Fabrication (EBF3) Almost any metal alloy

Granular

Direct metal laser sintering (DMLS) Almost any metal alloy

Electron beam melting (EBM) Titanium alloys

Selective laser melting (SLM) Titanium alloys, Cobalt Chrome alloys, Stainless Steels, Aluminium

Selective heat sintering (SHS)[citation needed] Thermoplastic powder

Selective laser sintering (SLS) Thermoplastics, metal powders, ceramic powders

Powder bed and inkjet head 3d printing, Plaster-based 3D printing (PP) Plaster

Laminated Laminated object manufacturing (LOM) Paper, metal foil, plastic film

Light polymerisedStereolithography (SLA) photopolymer

Digital Light Processing (DLP) photopolymer

http://en.wikipedia.org/wiki/3D_printing

DMLS

http://www.custompartnet.com/wu/direct-metal-laser-sintering

http://blog.ponoko.com/2012/02/08/3d-printed-lower-jawbone-transplanted-into-an-83-year-old-woman/

http://formlabs.com/

http://www.flickr.com/photos/bre/3458247336/

http://reprap.org/wiki/File:Builder.jpg

http://en.wikipedia.org/wiki/File:First_replication.jpg

http://www.youtube.com/watch?v=WoZ2BgPVtA0

Emma was born with her legs folded up by her ears, her shoulders turned in. “She could only move her thumb”

http://www.123dapp.com/create

http://www.thingiverse.com/explore/featured/3d-printing

http://www.repetier.com/documentation/repetier-host/object-placement/

http://meshlab.sourceforge.net/images/screenshots/SnapMeshLab.align2.png

http://cloud.netfabb.com/

http://www.hotmelt.com/blog/color-glue-sticks-glitter-glue-sticks-a-craftsters-dream

http://en.wikipedia.org/wiki/File:Rapid_prototyping_slicing.jpg

http://www.repetier.com/documentation/repetier-host/gcode-editor/

http://reprap.org/wiki/RAMPS_1.4 http://commons.wikimedia.org/wiki/File:Arduino_Uno_logo.png

http://reprap.org/wiki/Marlin

https://github.com/ErikZalm/Marlin

Marlin 3D Printer Firmware

http://reprap.org/wiki/CAM_Toolchains

http://meganlattereviews.wordpress.com/tag/fish-and-chips/

Glenn AdamsFacebookhttps://www.facebook.com/glenn.jay.adams

Emailgj@gjadams.com

LinkedInhttp://www.linkedin.com/in/gjadams