amzari ab. karim - iium
TRANSCRIPT
AMZARI AB. [email protected]
Location: Level GF-033Workshop Size: 60.45ft X 27.68ftCapacity in one time : 10-15 person students
Description:
Industrial design workshop began its operation in 2006. This workshop used to do wood work such as cutting, planner, chiseling and things related to woodworking. Normally used by lecturers and students undergraduate to teach studio work (model), final year project, project exhibitions, preparation for the competition to be accompanied, KAED fest and Ta’aruf Week. This workshop is equipped with electrical machines, power tools and hand tools.
Departments that use this workshop:
1. Department of Applied Arts and Design2. Department of Architecture3. Department of Landscape Architecture
Monday to Thursday
8.00am – 1.00pm
2.00pm – 5.00pm
Friday
8.00am – 12.15pm
2.45pm – 5.00pm
Non-working hours
Kindly contact person in charge
Equipment Purpose
ADR 2000 Crushing Machine – I nos
Crushing Machine is meant for testing the concrete cube or cylinder which is part of a simple yet cost effective test process that allows in judging compressive strength of concrete as well as for quality assurance to ensure concrete is fit for defined purposes in line with defined industry standards.
G200 Honda Concrete Mixer (patro)- 2 nos
Concrete mixer uses to mix the components. For smaller volume works portable concrete mixers are often used so that the concrete can be made at the construction site, giving the workers ample time to use the concrete before it hardens. An alternative to a machine is mixing concrete by hand.
Equipment Purpose
Concerete Mixer - diesel
(BSV) - 1 nosConcrete mixer uses to mix the components. For smaller volume works portable concrete mixers are often used so that the concrete can be made at the construction site, giving the workers ample time to use the concrete before it hardens. An alternative to a machine is mixing concrete by hand.
EL 35 – 1480 Rebound Hammer – 2 nos
Schmidt hammer, also known as a Swiss hammer or a rebound hammer, is a device to measure the elastic properties or strength of concrete or rock, mainly surface hardness and penetration resistance. By reference to the conversion chart, the rebound value can be used to determine the compressive strength.
Equipment Purpose
Compact Balance - I nos Weighing scales (or weigh scales or scales) are devices to measure weight.
Seaving Machine (EFL
2000) - 8 nosA sieve analysis (or gradation test) is a practice or procedure used (commonly used in civil engineering) to assess the particle size distribution (also called gradation) of a granular material. The size distribution is often of critical importance to the way the material performs in use.
Equipment Purpose
Mitotoyo Dial
Indicator
– 4 nos
Dial indicator is the instruments used to accurately measure small distances and angles, and amplify them to make them more obvious.
Vibro
Consistometer
– 2 nos
The test method is a mechanised variation of the slump test for the determination of workability of fresh concrete by performing vibration to concrete after removal of the slump cone. The assembly is mounted upon a small vibrating table operating at a fixed amplitude and frequency. The time to complete the required vibration gives an indication of the concrete workability. The set consists of vibrating table, slump cone, graduated rod with transparent plate, filling cone and tamping rod.
Equipment Purpose
Drying Oven (SD 0225EI) –
4 nosThese laboratory ovens can be used for sample drying, baking, annealing, conditioning, sterilizing, evaporating and dehydrating, and other general laboratory work.
Vicat Apparatus – 2 nos Determination of setting time and
soundness of cement requires the
use of a neat cement paste of
standard consistence. The Vicat
method is usually specified as the
test used to determine the water
content which will produce the
desired consistence.
Equipment Purpose
Riffle Box – 6 nos A sample divider (riffle box) is the most
convenient method to reduce a bulk sample of
aggregate to a smaller quantity for testing. The
riffle box is designed so that material poured in
the top is divided approximately equally and
diverted to two sides; material to one side of the
box is discarded and the remainder tested or
divided to a smaller sample. Coarse aggregates
may be divided while damp, but fine aggregate
should be surface-dry.
Slump Test
Apparatus – 6 nos
The Slump test method is used for the
determination of the consistency, the medium
and high workability of fresh concrete.
Equipment Purpose
Compaction Factor
Apparatus – 2 nosCompacting factor of fresh concrete determines to workability of fresh concrete by compacting factor test. Compacting factor apparatus enables the check to be made on the weight of concrete when it free falls from fixed heights into a cylindrical container of standard capacity. The ratio of the weight of partially compacted concrete to the weight of the concrete when fully compacted in the same mould.
Curing Tank – 2 nos Curing Tank is used for curing of cement cubes,
concrete cubes or other mortar specimens. It
can be used for curing cement specimens
within the mould, or after removing from the
mould.
Retaining Wall Reinforcement Pile Cap with Piling
Pile Cap Formwork Pile Cap with stump
Spun Pile